Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 263 insertions, 0 deletions

diff --git a/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java b/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java
new file mode 100644
index 000000000..3e38886a1
--- /dev/null
+++ b/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java
@@ -0,0 +1,263 @@
+/* -*- Mode: Java; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*************************************************************************
+ *
+ *  The Contents of this file are made available subject to the terms of
+ *  the BSD license.
+ *
+ *  Copyright 2000, 2010 Oracle and/or its affiliates.
+ *  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of Sun Microsystems, Inc. nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ *  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *************************************************************************/
+import com.sun.star.awt.PushButtonType;
+import com.sun.star.awt.XDialog;
+import com.sun.star.awt.XListBox;
+import com.sun.star.beans.MethodConcept;
+import com.sun.star.beans.Property;
+import com.sun.star.beans.PropertyValue;
+import com.sun.star.beans.XIntrospection;
+import com.sun.star.beans.XIntrospectionAccess;
+import com.sun.star.beans.XMultiPropertySet;
+import com.sun.star.frame.XComponentLoader;
+import com.sun.star.lang.XMultiComponentFactory;
+import com.sun.star.lang.XServiceInfo;
+import com.sun.star.lang.XTypeProvider;
+import com.sun.star.reflection.XIdlMethod;
+import com.sun.star.uno.Type;
+import com.sun.star.uno.UnoRuntime;
+import com.sun.star.uno.XComponentContext;
+
+public class UnoDialogSample2 extends UnoDialogSample {
+    XIntrospectionAccess m_xIntrospectionAccess = null;
+    Object m_oUnoObject = null;
+    // define some constants used to set positions and sizes
+    // of controls. For further information see
+    // http://ui.openoffice.org/knowledge/DialogSpecificationandGuidelines.odt
+    static final int nFixedTextHeight = 8;
+    static final int nControlMargin = 6;
+    static final int nDialogWidth = 250;
+    static final int nDialogHeight = 140;
+    // the default roadmap width == 80 MAPs
+    static final int nRoadmapWidth = 80;
+    static final int nButtonHeight = 14;
+    static final int nButtonWidth = 50;
+
+
+    public UnoDialogSample2(XComponentContext _xContext, XMultiComponentFactory _xMCF, Object _oUnoObject) {
+        super(_xContext, _xMCF);
+        try {
+            m_oUnoObject = _oUnoObject;
+            Object o = m_xMCF.createInstanceWithContext("com.sun.star.beans.Introspection", m_xContext);
+            XIntrospection xIntrospection = UnoRuntime.queryInterface(XIntrospection.class, o );
+            // the variable m_xIntrospectionAccess offers functionality to access all methods and properties
+            // of a variable
+            m_xIntrospectionAccess = xIntrospection.inspect(_oUnoObject);
+        } catch (com.sun.star.uno.Exception ex) {
+            ex.printStackTrace();
+        }
+    }
+
+    public static void main(String args[]) {
+        UnoDialogSample2 oUnoDialogSample2 = null;
+        try {
+            XComponentContext xContext = com.sun.star.comp.helper.Bootstrap.bootstrap();
+            if(xContext != null )
+                System.out.println("Connected to a running office ...");
+            XMultiComponentFactory xMCF = xContext.getServiceManager();
+            PropertyValue[] aPropertyValues = new PropertyValue[]{};
+            // create an arbitrary Uno-Object - in this case an empty writer document...
+            Object oDesktop =xMCF.createInstanceWithContext("com.sun.star.frame.Desktop", xContext);
+            XComponentLoader xComponentLoader = UnoRuntime.queryInterface(XComponentLoader.class, oDesktop);
+            Object oUnoObject = xComponentLoader.loadComponentFromURL("private:factory/swriter", "_default", 0, aPropertyValues);
+
+            // define some coordinates where to position the controls
+            final int nButtonPosX = (nDialogWidth/2) - (nButtonWidth/2);
+            final int nButtonPosY = nDialogHeight - nButtonHeight - nControlMargin;
+            final int nControlPosX = nRoadmapWidth + 2*nControlMargin;
+            final int nControlWidth = nDialogWidth - 3*nControlMargin - nRoadmapWidth;
+            final int nListBoxHeight = nDialogHeight - 4*nControlMargin - nButtonHeight;
+            oUnoDialogSample2 = new UnoDialogSample2(xContext, xMCF, oUnoObject);
+            oUnoDialogSample2.initialize( new String[] {"Height", "Moveable", "Name","PositionX","PositionY", "Step", "TabIndex","Title","Width"},
+                                          new Object[] { Integer.valueOf(nDialogHeight), Boolean.TRUE, "Dialog1", Integer.valueOf(102),Integer.valueOf(41), Integer.valueOf(1), Short.valueOf((short) 0), "Inspect a Uno-Object", Integer.valueOf(nDialogWidth)});
+            String sIntroLabel = "This Dialog lists information about a given Uno-Object.\nIt offers a view to inspect all supported servicenames, exported interfaces, methods and properties.";
+            oUnoDialogSample2.insertMultiLineFixedText(nControlPosX, 27, nControlWidth, 4, 1, sIntroLabel);
+            // get the data from the UNO object...
+            String[] sSupportedServiceNames = oUnoDialogSample2.getSupportedServiceNames();
+            String[] sInterfaceNames = oUnoDialogSample2.getExportedInterfaceNames();
+            String[] sMethodNames = oUnoDialogSample2.getMethodNames();
+            String[] sPropertyNames = oUnoDialogSample2.getPropertyNames();
+            // add controls to the dialog...
+            oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 2, sSupportedServiceNames);
+            oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 3, sInterfaceNames);
+            oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 4, sMethodNames);
+            oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 5, sPropertyNames);
+            oUnoDialogSample2.insertButton(oUnoDialogSample2, nButtonPosX, nButtonPosY, nButtonWidth, "~Close", (short) PushButtonType.OK_value);
+            oUnoDialogSample2.insertHorizontalFixedLine(0, nButtonPosY - nControlMargin - 4, nDialogWidth, "");
+            // create the windowpeer;
+            // it must be kept in mind that it must be created after the insertion of the controls
+            // (see http://qa.openoffice.org/issues/show_bug.cgi?id=75129)
+            oUnoDialogSample2.createWindowPeer();
+            // add the roadmap control. Note that the roadmap may not be created before the windowpeer of the dialog exists
+            // (see http://qa.openoffice.org/issues/show_bug.cgi?id=67369)
+            oUnoDialogSample2.addRoadmap();
+            oUnoDialogSample2.insertRoadmapItem(0, true, "Introduction", 1);
+            oUnoDialogSample2.insertRoadmapItem(1, true, "Supported Services", 2);
+            oUnoDialogSample2.insertRoadmapItem(2, true, "Interfaces", 3);
+            oUnoDialogSample2.insertRoadmapItem(3, true, "Methods", 4);
+            oUnoDialogSample2.insertRoadmapItem(4, true, "Properties", 5);
+            oUnoDialogSample2.m_xRMPSet.setPropertyValue("CurrentItemID", Short.valueOf((short) 1));
+            oUnoDialogSample2.m_xRMPSet.setPropertyValue("Complete", Boolean.TRUE);
+            oUnoDialogSample2.xDialog = UnoRuntime.queryInterface(XDialog.class, oUnoDialogSample2.m_xDialogControl);
+            oUnoDialogSample2.xDialog.execute();
+        }catch( Exception ex ) {
+            ex.printStackTrace(System.err);
+        }
+        finally{
+            //make sure always to dispose the component and free the memory!
+            if (oUnoDialogSample2 != null){
+                if (oUnoDialogSample2.m_xComponent != null){
+                    oUnoDialogSample2.m_xComponent.dispose();
+                }
+            }
+        }
+
+        System.exit( 0 );
+    }
+
+
+    public String[] getMethodNames() {
+        String[] sMethodNames = new String[]{};
+        try {
+            XIdlMethod[] xIdlMethods = m_xIntrospectionAccess.getMethods(MethodConcept.ALL);
+            sMethodNames = new String[xIdlMethods.length];
+            for (int i = 0; i < xIdlMethods.length; i++){
+                sMethodNames[i] = xIdlMethods[i].getName();
+            }
+        }
+        catch( Exception e ) {
+            System.err.println( e );
+        }
+        return sMethodNames;
+    }
+
+    // returns the names of all supported servicenames of a UNO object
+    public String[] getSupportedServiceNames() {
+        String[] sSupportedServiceNames = new String[]{};
+        // If the Uno-Object supports "com.sun.star.lang.XServiceInfo"
+        // this will give access to all supported servicenames
+        XServiceInfo xServiceInfo = UnoRuntime.queryInterface( XServiceInfo.class, m_oUnoObject);
+        if ( xServiceInfo != null ) {
+            sSupportedServiceNames = xServiceInfo.getSupportedServiceNames();
+        }
+        return sSupportedServiceNames;
+    }
+
+    // returns the names of all properties of a UNO object
+    protected String[] getPropertyNames() {
+        String[] sPropertyNames = new String[]{};
+        try {
+            Property[] aProperties = m_xIntrospectionAccess.getProperties(com.sun.star.beans.PropertyConcept.ATTRIBUTES + com.sun.star.beans.PropertyConcept.PROPERTYSET);
+            sPropertyNames = new String[aProperties.length];
+            for (int i = 0; i < aProperties.length; i++){
+                sPropertyNames[i] = aProperties[i].Name;
+            }
+        }
+        catch( Exception e ) {
+            System.err.println( e );
+        }
+        return sPropertyNames;
+    }
+
+
+    // returns the names of all exported interfaces of a UNO object
+    protected String[] getExportedInterfaceNames(){
+        Type[] aTypes = new Type[]{};
+        String[] sTypeNames = new String[]{};
+        // The XTypeProvider interfaces offers access to all exported interfaces
+        XTypeProvider xTypeProvider = UnoRuntime.queryInterface( XTypeProvider.class, m_oUnoObject);
+        if ( xTypeProvider != null ) {
+            aTypes = xTypeProvider.getTypes();
+            sTypeNames = new String[aTypes.length];
+            for (int i = 0; i < aTypes.length - 1; i++){
+                sTypeNames[i] = aTypes[i].getTypeName();
+            }
+        }
+        return sTypeNames;
+    }
+
+
+
+    public XListBox insertListBox(int _nPosX, int _nPosY, int _nHeight, int _nWidth, int _nStep, String[] _sStringItemList) {
+        XListBox xListBox = null;
+        try{
+            // create a unique name by means of an own implementation...
+            String sName = createUniqueName(m_xDlgModelNameContainer, "ListBox");
+            // create a controlmodel at the multiservicefactory of the dialog model...
+            Object oListBoxModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlListBoxModel");
+            XMultiPropertySet xLBModelMPSet = UnoRuntime.queryInterface(XMultiPropertySet.class, oListBoxModel);
+            // Set the properties at the model - keep in mind to pass the property names in alphabetical order!
+            xLBModelMPSet.setPropertyValues(
+                new String[]  {"Dropdown", "Height", "Name", "PositionX", "PositionY", "ReadOnly", "Step", "StringItemList", "Width" } ,
+                new Object[] {Boolean.FALSE, Integer.valueOf(_nHeight), sName, Integer.valueOf(_nPosX), Integer.valueOf(_nPosY), Boolean.TRUE, Integer.valueOf(_nStep), _sStringItemList, Integer.valueOf(_nWidth)});
+            m_xDlgModelNameContainer.insertByName(sName, xLBModelMPSet);
+        }catch (com.sun.star.uno.Exception ex) {
+            throw new java.lang.RuntimeException("cannot happen...", ex);
+        }
+        return xListBox;
+    }
+
+
+    public void insertMultiLineFixedText(int _nPosX, int _nPosY, int _nWidth, int _nLineCount, int _nStep, String _sLabel) {
+        try {
+            // create a unique name by means of an own implementation...
+            String sName = createUniqueName(m_xDlgModelNameContainer, "Label");
+            int nHeight = _nLineCount * nFixedTextHeight;
+            // create a controlmodel at the multiservicefactory of the dialog model...
+            Object oFTModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlFixedTextModel");
+            XMultiPropertySet xFTModelMPSet = UnoRuntime.queryInterface(XMultiPropertySet.class, oFTModel);
+            // Set the properties at the model - keep in mind to pass the property names in alphabetical order!
+            xFTModelMPSet.setPropertyValues(
+                new String[] {"Height", "Label", "MultiLine", "Name", "PositionX", "PositionY", "Step", "Width"},
+                new Object[] { Integer.valueOf(nHeight), _sLabel, Boolean.TRUE, sName, Integer.valueOf(_nPosX), Integer.valueOf(_nPosY), Integer.valueOf(_nStep), Integer.valueOf(_nWidth)});
+            // add the model to the NameContainer of the dialog model
+            m_xDlgModelNameContainer.insertByName(sName, oFTModel);
+        }catch (com.sun.star.uno.Exception ex){
+            /* perform individual exception handling here.
+             * Possible exception types are:
+             * com.sun.star.lang.IllegalArgumentException,
+             * com.sun.star.lang.WrappedTargetException,
+             * com.sun.star.container.ElementExistException,
+             * com.sun.star.beans.PropertyVetoException,
+             * com.sun.star.beans.UnknownPropertyException,
+             * com.sun.star.uno.Exception
+             */
+            ex.printStackTrace(System.err);
+        }
+    }
+
+}// end of class
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */