Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1096 insertions, 0 deletions

diff --git a/sd/source/ui/func/fuconrec.cxx b/sd/source/ui/func/fuconrec.cxx
new file mode 100644
index 000000000..d93ef2849
--- /dev/null
+++ b/sd/source/ui/func/fuconrec.cxx
@@ -0,0 +1,1096 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <fuconrec.hxx>
+#include <svx/svdpagv.hxx>
+
+#include <svx/svxids.hrc>
+#include <svx/strings.hrc>
+#include <svx/dialmgr.hxx>
+
+#include <app.hrc>
+#include <svl/itemset.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xlnstwit.hxx>
+#include <svx/xlnedwit.hxx>
+#include <svx/xlnedit.hxx>
+#include <svx/xlnstit.hxx>
+#include <svx/xlnwtit.hxx>
+#include <sfx2/viewfrm.hxx>
+#include <svx/sdtmfitm.hxx>
+#include <svx/sxekitm.hxx>
+#include <svx/sderitm.hxx>
+#include <sfx2/dispatch.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdocirc.hxx>
+#include <svl/intitem.hxx>
+#include <sfx2/request.hxx>
+#include <editeng/adjustitem.hxx>
+#include <editeng/eeitem.hxx>
+#include <svx/xtable.hxx>
+#include <svx/xfltrit.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/sdtagitm.hxx>
+#include <svx/sdtditm.hxx>
+
+#include <svx/svdocapt.hxx>
+
+#include <svx/svdomeas.hxx>
+#include <ViewShell.hxx>
+#include <ViewShellBase.hxx>
+#include <ToolBarManager.hxx>
+#include <editeng/writingmodeitem.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/signaturelinehelper.hxx>
+#include <osl/diagnose.h>
+
+#include <sdresid.hxx>
+#include <View.hxx>
+#include <sdpage.hxx>
+#include <Window.hxx>
+#include <drawdoc.hxx>
+#include <unokywds.hxx>
+
+#include <strings.hrc>
+
+using namespace com::sun::star;
+
+namespace sd {
+
+
+FuConstructRectangle::FuConstructRectangle (
+    ViewShell*  pViewSh,
+    ::sd::Window*       pWin,
+    ::sd::View*         pView,
+    SdDrawDocument* pDoc,
+    SfxRequest&     rReq)
+    : FuConstruct(pViewSh, pWin, pView, pDoc, rReq)
+    , mnFillTransparence(0)
+    , mnLineStyle(SAL_MAX_UINT16)
+{
+}
+
+namespace{
+
+/// Checks to see if the request has a parameter of IsSticky:bool=true
+/// It means that the selected command/button will stay selected after use
+bool isSticky(const SfxRequest& rReq)
+{
+    const SfxItemSet *pArgs = rReq.GetArgs ();
+    if (pArgs)
+    {
+        const SfxBoolItem* pIsSticky = rReq.GetArg<SfxBoolItem>(FN_PARAM_4);
+        if (pIsSticky && pIsSticky->GetValue())
+            return true;
+    }
+
+    return false;
+}
+
+}
+
+rtl::Reference<FuPoor> FuConstructRectangle::Create( ViewShell* pViewSh, ::sd::Window* pWin, ::sd::View* pView, SdDrawDocument* pDoc, SfxRequest& rReq, bool bPermanent )
+{
+    FuConstructRectangle* pFunc;
+    rtl::Reference<FuPoor> xFunc( pFunc = new FuConstructRectangle( pViewSh, pWin, pView, pDoc, rReq ) );
+    xFunc->DoExecute(rReq);
+    pFunc->SetPermanent(bPermanent || isSticky(rReq));
+    return xFunc;
+}
+
+void FuConstructRectangle::DoExecute( SfxRequest& rReq )
+{
+    FuConstruct::DoExecute( rReq );
+
+    mpViewShell->GetViewShellBase().GetToolBarManager()->SetToolBar(
+        ToolBarManager::ToolBarGroup::Function,
+        ToolBarManager::msDrawingObjectToolBar);
+
+    const SfxItemSet *pArgs = rReq.GetArgs ();
+
+    if (pArgs)
+    {
+        switch (nSlotId)
+        {
+            case SID_DRAW_ELLIPSE :
+            {
+                const SfxUInt32Item* pCenterX = rReq.GetArg<SfxUInt32Item>(ID_VAL_CENTER_X);
+                const SfxUInt32Item* pCenterY = rReq.GetArg<SfxUInt32Item>(ID_VAL_CENTER_Y);
+                const SfxUInt32Item* pAxisX = rReq.GetArg<SfxUInt32Item>(ID_VAL_AXIS_X);
+                const SfxUInt32Item* pAxisY = rReq.GetArg<SfxUInt32Item>(ID_VAL_AXIS_Y);
+
+                if (!pCenterX || !pCenterY || !pAxisX || !pAxisY)
+                    break;
+
+                ::tools::Rectangle   aNewRectangle (pCenterX->GetValue () - pAxisX->GetValue () / 2,
+                                           pCenterY->GetValue () - pAxisY->GetValue () / 2,
+                                           pCenterX->GetValue () + pAxisX->GetValue () / 2,
+                                           pCenterY->GetValue () + pAxisY->GetValue () / 2);
+                SdrCircObj  *pNewCircle = new SdrCircObj(
+                    mpView->getSdrModelFromSdrView(),
+                    SdrCircKind::Full,
+                    aNewRectangle);
+                SdrPageView *pPV = mpView->GetSdrPageView();
+
+                mpView->InsertObjectAtView(pNewCircle, *pPV, SdrInsertFlags::SETDEFLAYER | SdrInsertFlags::SETDEFATTR);
+            }
+            break;
+
+            case SID_DRAW_RECT :
+            {
+                const SfxUInt32Item* pMouseStartX       = rReq.GetArg<SfxUInt32Item>(ID_VAL_MOUSESTART_X);
+                const SfxUInt32Item* pMouseStartY       = rReq.GetArg<SfxUInt32Item>(ID_VAL_MOUSESTART_Y);
+                const SfxUInt32Item* pMouseEndX         = rReq.GetArg<SfxUInt32Item>(ID_VAL_MOUSEEND_X);
+                const SfxUInt32Item* pMouseEndY         = rReq.GetArg<SfxUInt32Item>(ID_VAL_MOUSEEND_Y);
+                const SfxUInt16Item* pFillTransparence  = rReq.GetArg<SfxUInt16Item>(FN_PARAM_1);
+                const SfxStringItem* pFillColor         = rReq.GetArg<SfxStringItem>(FN_PARAM_2);
+                const SfxUInt16Item* pLineStyle         = rReq.GetArg<SfxUInt16Item>(FN_PARAM_3);
+                const SfxStringItem* pShapeName         = rReq.GetArg<SfxStringItem>(SID_SHAPE_NAME);
+
+                if (pFillTransparence && pFillTransparence->GetValue() > 0)
+                {
+                    mnFillTransparence = pFillTransparence->GetValue();
+                }
+                if (pFillColor && !pFillColor->GetValue().isEmpty())
+                {
+                    msFillColor = pFillColor->GetValue();
+                }
+                if (pLineStyle)
+                {
+                    mnLineStyle = pLineStyle->GetValue();
+                }
+                if (pShapeName && !pShapeName->GetValue().isEmpty())
+                {
+                    msShapeName = pShapeName->GetValue();
+                }
+
+                if (!pMouseStartX || !pMouseStartY || !pMouseEndX || !pMouseEndY)
+                    break;
+
+                ::tools::Rectangle   aNewRectangle (pMouseStartX->GetValue (),
+                                           pMouseStartY->GetValue (),
+                                           pMouseEndX->GetValue (),
+                                           pMouseEndY->GetValue ());
+                SdrRectObj  *pNewRect = new SdrRectObj(
+                    mpView->getSdrModelFromSdrView(),
+                    aNewRectangle);
+                SdrPageView *pPV = mpView->GetSdrPageView();
+
+                mpView->InsertObjectAtView(pNewRect, *pPV, SdrInsertFlags::SETDEFLAYER | SdrInsertFlags::SETDEFATTR);
+            }
+            break;
+        }
+    }
+
+    if (nSlotId == SID_TOOL_CONNECTOR               ||
+        nSlotId == SID_CONNECTOR_ARROW_START        ||
+        nSlotId == SID_CONNECTOR_ARROW_END          ||
+        nSlotId == SID_CONNECTOR_ARROWS             ||
+        nSlotId == SID_CONNECTOR_CIRCLE_START       ||
+        nSlotId == SID_CONNECTOR_CIRCLE_END         ||
+        nSlotId == SID_CONNECTOR_CIRCLES            ||
+        nSlotId == SID_CONNECTOR_LINE               ||
+        nSlotId == SID_CONNECTOR_LINE_ARROW_START   ||
+        nSlotId == SID_CONNECTOR_LINE_ARROW_END     ||
+        nSlotId == SID_CONNECTOR_LINE_ARROWS        ||
+        nSlotId == SID_CONNECTOR_LINE_CIRCLE_START  ||
+        nSlotId == SID_CONNECTOR_LINE_CIRCLE_END    ||
+        nSlotId == SID_CONNECTOR_LINE_CIRCLES       ||
+        nSlotId == SID_CONNECTOR_CURVE              ||
+        nSlotId == SID_CONNECTOR_CURVE_ARROW_START  ||
+        nSlotId == SID_CONNECTOR_CURVE_ARROW_END    ||
+        nSlotId == SID_CONNECTOR_CURVE_ARROWS       ||
+        nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START ||
+        nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END   ||
+        nSlotId == SID_CONNECTOR_CURVE_CIRCLES      ||
+        nSlotId == SID_CONNECTOR_LINES              ||
+        nSlotId == SID_CONNECTOR_LINES_ARROW_START  ||
+        nSlotId == SID_CONNECTOR_LINES_ARROW_END    ||
+        nSlotId == SID_CONNECTOR_LINES_ARROWS       ||
+        nSlotId == SID_CONNECTOR_LINES_CIRCLE_START ||
+        nSlotId == SID_CONNECTOR_LINES_CIRCLE_END   ||
+        nSlotId == SID_CONNECTOR_LINES_CIRCLES      ||
+        nSlotId == SID_LINE_ARROW_START             ||
+        nSlotId == SID_LINE_ARROW_END               ||
+        nSlotId == SID_LINE_ARROWS                  ||
+        nSlotId == SID_LINE_ARROW_CIRCLE            ||
+        nSlotId == SID_LINE_CIRCLE_ARROW            ||
+        nSlotId == SID_LINE_ARROW_SQUARE            ||
+        nSlotId == SID_LINE_SQUARE_ARROW )
+    {
+        mpView->UnmarkAll();
+    }
+}
+
+bool FuConstructRectangle::MouseButtonDown(const MouseEvent& rMEvt)
+{
+    bool bReturn = FuConstruct::MouseButtonDown(rMEvt);
+
+    if ( rMEvt.IsLeft() && !mpView->IsAction() )
+    {
+        Point aPnt( mpWindow->PixelToLogic( rMEvt.GetPosPixel() ) );
+
+        mpWindow->CaptureMouse();
+        sal_uInt16 nDrgLog = sal_uInt16 ( mpWindow->PixelToLogic(Size(DRGPIX,0)).Width() );
+
+        if (mpView->GetCurrentObjIdentifier() == SdrObjKind::Caption)
+        {
+            Size aCaptionSize(846, 846);    // (4x2)cm
+            bReturn = mpView->BegCreateCaptionObj(aPnt, aCaptionSize,
+                                                nullptr, nDrgLog);
+        }
+        else
+        {
+            mpView->BegCreateObj(aPnt, nullptr, nDrgLog);
+        }
+
+        SdrObject* pObj = mpView->GetCreateObj();
+
+        if (pObj)
+        {
+            SfxItemSet aAttr(mpDoc->GetPool());
+            SetStyleSheet(aAttr, pObj);
+            SetAttributes(aAttr, pObj);
+            SetLineEnds(aAttr, *pObj);
+            pObj->SetMergedItemSet(aAttr);
+
+            if( nSlotId == SID_DRAW_CAPTION_VERTICAL )
+                static_cast<SdrTextObj*>(pObj)->SetVerticalWriting( true );
+        }
+    }
+    return bReturn;
+}
+
+bool FuConstructRectangle::MouseButtonUp(const MouseEvent& rMEvt)
+{
+    bool bReturn(false);
+
+    if(mpView->IsCreateObj() && rMEvt.IsLeft())
+    {
+        SdrObject* pObj = mpView->GetCreateObj();
+
+        if(pObj && mpView->EndCreateObj(SdrCreateCmd::ForceEnd))
+        {
+            if(SID_DRAW_MEASURELINE == nSlotId)
+            {
+                SdrLayerAdmin& rAdmin = mpDoc->GetLayerAdmin();
+                pObj->SetLayer(rAdmin.GetLayerID(sUNO_LayerName_measurelines));
+            }
+
+            // init text position when vertical caption object is created
+            if( dynamic_cast< const SdrCaptionObj *>( pObj ) !=  nullptr && SID_DRAW_CAPTION_VERTICAL == nSlotId)
+            {
+                // draw text object, needs to be initialized when vertical text is used
+                SfxItemSet aSet(pObj->GetMergedItemSet());
+
+                aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER));
+                aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT));
+
+                // Correct the value of SDRATTR_TEXTDIRECTION to avoid SetItemSet
+                // calling SetVerticalWriting() again since this item may not yet
+                // be set at the object and thus may differ from vertical state of
+                // the object.
+                aSet.Put(SvxWritingModeItem(css::text::WritingMode_TB_RL, SDRATTR_TEXTDIRECTION));
+                pObj->SetMergedItemSet(aSet);
+            }
+
+            bReturn = true;
+        }
+        else
+        {
+            //Drag was too small to create object, so insert default object at click pos
+            Point aClickPos(mpWindow->PixelToLogic(rMEvt.GetPosPixel()));
+            sal_uInt32 nDefaultObjectSize(1500);
+            sal_Int32 nCenterOffset(-sal_Int32(nDefaultObjectSize / 2));
+            aClickPos.AdjustX(nCenterOffset);
+            aClickPos.AdjustY(nCenterOffset);
+
+            SdrPageView *pPV = mpView->GetSdrPageView();
+            if(mpView->IsSnapEnabled())
+                aClickPos = mpView->GetSnapPos(aClickPos, pPV);
+
+            ::tools::Rectangle aNewObjectRectangle(aClickPos, Size(nDefaultObjectSize, nDefaultObjectSize));
+            SdrObjectUniquePtr pObjDefault = CreateDefaultObject(nSlotId, aNewObjectRectangle);
+
+            bReturn = mpView->InsertObjectAtView(pObjDefault.release(), *pPV);
+        }
+    }
+
+    bReturn = FuConstruct::MouseButtonUp (rMEvt) || bReturn;
+
+    if (!bPermanent)
+        mpViewShell->GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SfxCallMode::ASYNCHRON);
+
+    return bReturn;
+}
+
+void FuConstructRectangle::Activate()
+{
+    SdrObjKind aObjKind;
+
+    switch (nSlotId)
+    {
+        case SID_LINE_ARROW_START:
+        case SID_LINE_ARROW_END:
+        case SID_LINE_ARROWS:
+        case SID_LINE_ARROW_CIRCLE:
+        case SID_LINE_CIRCLE_ARROW:
+        case SID_LINE_ARROW_SQUARE:
+        case SID_LINE_SQUARE_ARROW:
+            mpView->SetGlueVisible();
+            [[fallthrough]];
+        case SID_DRAW_LINE :
+        case SID_DRAW_XLINE:
+            aObjKind = SdrObjKind::Line;
+            break;
+
+        case SID_DRAW_MEASURELINE:
+        {
+            aObjKind = SdrObjKind::Measure;
+        }
+        break;
+
+        case SID_DRAW_RECT             :
+        case SID_DRAW_RECT_NOFILL      :
+        case SID_DRAW_RECT_ROUND       :
+        case SID_DRAW_RECT_ROUND_NOFILL:
+        case SID_DRAW_SQUARE           :
+        case SID_DRAW_SQUARE_NOFILL    :
+        case SID_DRAW_SQUARE_ROUND     :
+        case SID_DRAW_SQUARE_ROUND_NOFILL:
+        {
+            aObjKind = SdrObjKind::Rectangle;
+        }
+        break;
+
+        case SID_DRAW_ELLIPSE       :
+        case SID_DRAW_ELLIPSE_NOFILL:
+        case SID_DRAW_CIRCLE        :
+        case SID_DRAW_CIRCLE_NOFILL :
+        {
+            aObjKind = SdrObjKind::CircleOrEllipse;
+        }
+        break;
+
+        case SID_DRAW_CAPTION:
+        case SID_DRAW_CAPTION_VERTICAL:
+        {
+            aObjKind = SdrObjKind::Caption;
+        }
+        break;
+
+        case SID_TOOL_CONNECTOR:
+        case SID_CONNECTOR_ARROW_START:
+        case SID_CONNECTOR_ARROW_END:
+        case SID_CONNECTOR_ARROWS:
+        case SID_CONNECTOR_CIRCLE_START:
+        case SID_CONNECTOR_CIRCLE_END:
+        case SID_CONNECTOR_CIRCLES:
+        case SID_CONNECTOR_LINE:
+        case SID_CONNECTOR_LINE_ARROW_START:
+        case SID_CONNECTOR_LINE_ARROW_END:
+        case SID_CONNECTOR_LINE_ARROWS:
+        case SID_CONNECTOR_LINE_CIRCLE_START:
+        case SID_CONNECTOR_LINE_CIRCLE_END:
+        case SID_CONNECTOR_LINE_CIRCLES:
+        case SID_CONNECTOR_CURVE:
+        case SID_CONNECTOR_CURVE_ARROW_START:
+        case SID_CONNECTOR_CURVE_ARROW_END:
+        case SID_CONNECTOR_CURVE_ARROWS:
+        case SID_CONNECTOR_CURVE_CIRCLE_START:
+        case SID_CONNECTOR_CURVE_CIRCLE_END:
+        case SID_CONNECTOR_CURVE_CIRCLES:
+        case SID_CONNECTOR_LINES:
+        case SID_CONNECTOR_LINES_ARROW_START:
+        case SID_CONNECTOR_LINES_ARROW_END:
+        case SID_CONNECTOR_LINES_ARROWS:
+        case SID_CONNECTOR_LINES_CIRCLE_START:
+        case SID_CONNECTOR_LINES_CIRCLE_END:
+        case SID_CONNECTOR_LINES_CIRCLES:
+        {
+            aObjKind = SdrObjKind::Edge;
+            mpView->SetGlueVisible();
+        }
+        break;
+        case SID_INSERT_SIGNATURELINE:
+        {
+            aObjKind = SdrObjKind::Graphic;
+        }
+        break;
+
+        default:
+        {
+            aObjKind = SdrObjKind::Rectangle;
+        }
+        break;
+    }
+
+    mpView->SetCurrentObj(aObjKind);
+
+    FuConstruct::Activate();
+}
+
+void FuConstructRectangle::Deactivate()
+{
+    if( nSlotId == SID_TOOL_CONNECTOR               ||
+        nSlotId == SID_CONNECTOR_ARROW_START        ||
+        nSlotId == SID_CONNECTOR_ARROW_END          ||
+        nSlotId == SID_CONNECTOR_ARROWS             ||
+        nSlotId == SID_CONNECTOR_CIRCLE_START       ||
+        nSlotId == SID_CONNECTOR_CIRCLE_END         ||
+        nSlotId == SID_CONNECTOR_CIRCLES            ||
+        nSlotId == SID_CONNECTOR_LINE               ||
+        nSlotId == SID_CONNECTOR_LINE_ARROW_START   ||
+        nSlotId == SID_CONNECTOR_LINE_ARROW_END     ||
+        nSlotId == SID_CONNECTOR_LINE_ARROWS        ||
+        nSlotId == SID_CONNECTOR_LINE_CIRCLE_START  ||
+        nSlotId == SID_CONNECTOR_LINE_CIRCLE_END    ||
+        nSlotId == SID_CONNECTOR_LINE_CIRCLES       ||
+        nSlotId == SID_CONNECTOR_CURVE              ||
+        nSlotId == SID_CONNECTOR_CURVE_ARROW_START  ||
+        nSlotId == SID_CONNECTOR_CURVE_ARROW_END    ||
+        nSlotId == SID_CONNECTOR_CURVE_ARROWS       ||
+        nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START ||
+        nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END   ||
+        nSlotId == SID_CONNECTOR_CURVE_CIRCLES      ||
+        nSlotId == SID_CONNECTOR_LINES              ||
+        nSlotId == SID_CONNECTOR_LINES_ARROW_START  ||
+        nSlotId == SID_CONNECTOR_LINES_ARROW_END    ||
+        nSlotId == SID_CONNECTOR_LINES_ARROWS       ||
+        nSlotId == SID_CONNECTOR_LINES_CIRCLE_START ||
+        nSlotId == SID_CONNECTOR_LINES_CIRCLE_END   ||
+        nSlotId == SID_CONNECTOR_LINES_CIRCLES      ||
+        nSlotId == SID_LINE_ARROW_START             ||
+        nSlotId == SID_LINE_ARROW_END               ||
+        nSlotId == SID_LINE_ARROWS                  ||
+        nSlotId == SID_LINE_ARROW_CIRCLE            ||
+        nSlotId == SID_LINE_CIRCLE_ARROW            ||
+        nSlotId == SID_LINE_ARROW_SQUARE            ||
+        nSlotId == SID_LINE_SQUARE_ARROW )
+    {
+        mpView->SetGlueVisible( false );
+    }
+    FuConstruct::Deactivate();
+
+    if (nSlotId != SID_INSERT_SIGNATURELINE)
+    {
+        return;
+    }
+
+    const SdrMarkList& rMarkList = mpView->GetMarkedObjectList();
+    if (rMarkList.GetMarkCount() < 1)
+    {
+        // Just switching pages, no signature rectangle yet.
+        return;
+    }
+
+    // Finished drawing a signature rectangle, now set it up.
+    if (!mpViewShell)
+    {
+        return;
+    }
+
+    uno::Reference<security::XCertificate> xCertificate
+        = svx::SignatureLineHelper::getSignatureCertificate(mpViewShell->GetObjectShell(),
+                mpViewShell->GetFrameWeld());
+    if (!xCertificate.is())
+    {
+        return;
+    }
+
+    svx::SignatureLineHelper::setShapeCertificate(mpView, xCertificate);
+
+    // Update infobar to offer "finish signing".
+    SfxViewFrame* pFrame = mpViewShell->GetViewFrame();
+    if (pFrame && pFrame->HasInfoBarWithID(u"readonly"))
+    {
+        pFrame->RemoveInfoBar(u"readonly");
+        pFrame->AppendReadOnlyInfobar();
+    }
+}
+
+namespace {
+/// Returns the color based on the color names listed in core/include/tools/color.hxx
+/// Feel free to extend with more color names from color.hxx
+Color strToColor(std::u16string_view sColor)
+{
+    Color aColor = COL_AUTO;
+
+    if (sColor == u"COL_GRAY")
+        aColor = COL_GRAY;
+    else if (sColor == u"COL_GRAY3")
+        aColor = COL_GRAY3;
+    else if (sColor == u"COL_GRAY7")
+        aColor = COL_GRAY7;
+
+    return aColor;
+}
+}
+
+/**
+ * set attribute for the object to be created
+ */
+void FuConstructRectangle::SetAttributes(SfxItemSet& rAttr, SdrObject* pObj)
+{
+    if (nSlotId == SID_DRAW_RECT_ROUND        ||
+        nSlotId == SID_DRAW_RECT_ROUND_NOFILL ||
+        nSlotId == SID_DRAW_SQUARE_ROUND      ||
+        nSlotId == SID_DRAW_SQUARE_ROUND_NOFILL)
+    {
+        // round corner
+        rAttr.Put(makeSdrEckenradiusItem(500));
+    }
+    else if (nSlotId == SID_CONNECTOR_LINE              ||
+             nSlotId == SID_CONNECTOR_LINE_ARROW_START  ||
+             nSlotId == SID_CONNECTOR_LINE_ARROW_END    ||
+             nSlotId == SID_CONNECTOR_LINE_ARROWS       ||
+             nSlotId == SID_CONNECTOR_LINE_CIRCLE_START ||
+             nSlotId == SID_CONNECTOR_LINE_CIRCLE_END   ||
+             nSlotId == SID_CONNECTOR_LINE_CIRCLES)
+    {
+        // direct connector
+        rAttr.Put(SdrEdgeKindItem(SdrEdgeKind::OneLine));
+    }
+    else if (nSlotId == SID_CONNECTOR_LINES              ||
+             nSlotId == SID_CONNECTOR_LINES_ARROW_START  ||
+             nSlotId == SID_CONNECTOR_LINES_ARROW_END    ||
+             nSlotId == SID_CONNECTOR_LINES_ARROWS       ||
+             nSlotId == SID_CONNECTOR_LINES_CIRCLE_START ||
+             nSlotId == SID_CONNECTOR_LINES_CIRCLE_END   ||
+             nSlotId == SID_CONNECTOR_LINES_CIRCLES)
+    {
+        // line connector
+        rAttr.Put(SdrEdgeKindItem(SdrEdgeKind::ThreeLines));
+    }
+    else if (nSlotId == SID_CONNECTOR_CURVE              ||
+             nSlotId == SID_CONNECTOR_CURVE_ARROW_START  ||
+             nSlotId == SID_CONNECTOR_CURVE_ARROW_END    ||
+             nSlotId == SID_CONNECTOR_CURVE_ARROWS       ||
+             nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START ||
+             nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END   ||
+             nSlotId == SID_CONNECTOR_CURVE_CIRCLES)
+    {
+        // curve connector
+        rAttr.Put(SdrEdgeKindItem(SdrEdgeKind::Bezier));
+    }
+    else if ( nSlotId == SID_DRAW_CAPTION || nSlotId == SID_DRAW_CAPTION_VERTICAL )
+    {
+        // legend object
+        Size aSize(pObj->GetLogicRect().GetSize());
+        rAttr.Put( makeSdrTextMinFrameHeightItem( aSize.Height() ) );
+        rAttr.Put( makeSdrTextMinFrameWidthItem( aSize.Width() ) );
+        rAttr.Put( makeSdrTextAutoGrowHeightItem( true ) );
+        rAttr.Put( makeSdrTextAutoGrowWidthItem( true ) );
+
+        // Support full with for vertical caption objects, too
+        if(SID_DRAW_CAPTION == nSlotId)
+            rAttr.Put( SdrTextHorzAdjustItem( SDRTEXTHORZADJUST_BLOCK ) );
+        else
+            rAttr.Put( SdrTextVertAdjustItem( SDRTEXTVERTADJUST_BLOCK ) );
+
+        rAttr.Put( SvxAdjustItem( SvxAdjust::Center, EE_PARA_JUST ) );
+        rAttr.Put( makeSdrTextLeftDistItem( 100 ) );
+        rAttr.Put( makeSdrTextRightDistItem( 100 ) );
+        rAttr.Put( makeSdrTextUpperDistItem( 100 ) );
+        rAttr.Put( makeSdrTextLowerDistItem( 100 ) );
+    }
+    else if (nSlotId == SID_DRAW_MEASURELINE)
+    {
+        // dimension line
+        SdPage* pPage = static_cast<SdPage*>( mpView->GetSdrPageView()->GetPage() );
+        OUString aName(SdResId(STR_POOLSHEET_MEASURE));
+        SfxStyleSheet* pSheet(
+            static_cast< SfxStyleSheet* >(
+                pPage->getSdrModelFromSdrPage().GetStyleSheetPool()->Find(aName, SfxStyleFamily::Para)));
+        DBG_ASSERT(pSheet, "StyleSheet missing");
+
+        if (pSheet)
+        {
+            pObj->SetStyleSheet(pSheet, false);
+        }
+
+        SdrLayerAdmin& rAdmin = mpDoc->GetLayerAdmin();
+        pObj->SetLayer(rAdmin.GetLayerID(sUNO_LayerName_measurelines));
+    }
+    else if (nSlotId == SID_DRAW_RECT)
+    {
+        if (mnFillTransparence > 0 && mnFillTransparence <= 100)
+            rAttr.Put(XFillTransparenceItem(mnFillTransparence));
+        if (!msFillColor.isEmpty())
+            rAttr.Put(XFillColorItem(OUString(), strToColor(msFillColor)));
+        if (!msShapeName.isEmpty())
+            pObj->SetName(msShapeName);
+
+        switch(mnLineStyle)
+        {
+        case 0:
+            rAttr.Put( XLineStyleItem(css::drawing::LineStyle_NONE ) );
+            break;
+        case 1:
+            rAttr.Put( XLineStyleItem(css::drawing::LineStyle_SOLID ) );
+            break;
+        case 2:
+            rAttr.Put( XLineStyleItem(css::drawing::LineStyle_DASH ) );
+            break;
+        default:
+            // Leave it to the defaults
+            break;
+        }
+    }
+    else if (nSlotId == SID_INSERT_SIGNATURELINE)
+    {
+        // Avoid the default solid fill and line, we'll set a graphic instead.
+        rAttr.Put(XFillStyleItem(drawing::FillStyle_NONE));
+        rAttr.Put(XLineStyleItem(drawing::LineStyle_NONE));
+    }
+}
+
+/**
+ * set line starts and ends for the object to be created
+ */
+static ::basegfx::B2DPolyPolygon getPolygon(TranslateId pResId, const SdrModel& rModel)
+{
+    ::basegfx::B2DPolyPolygon aRetval;
+    XLineEndListRef pLineEndList(rModel.GetLineEndList());
+
+    if( pLineEndList.is() )
+    {
+        OUString aArrowName(SvxResId(pResId));
+        ::tools::Long nCount = pLineEndList->Count();
+        ::tools::Long nIndex;
+        for( nIndex = 0; nIndex < nCount; nIndex++ )
+        {
+            const XLineEndEntry* pEntry = pLineEndList->GetLineEnd(nIndex);
+            if( pEntry->GetName() == aArrowName )
+            {
+                aRetval = pEntry->GetLineEnd();
+                break;
+            }
+        }
+    }
+
+    return aRetval;
+}
+
+void FuConstructRectangle::SetLineEnds(SfxItemSet& rAttr, SdrObject const & rObj)
+{
+    if ( !((rObj.GetObjIdentifier() == SdrObjKind::Edge &&
+          nSlotId != SID_TOOL_CONNECTOR        &&
+          nSlotId != SID_CONNECTOR_LINE        &&
+          nSlotId != SID_CONNECTOR_LINES       &&
+          nSlotId != SID_CONNECTOR_CURVE)      ||
+          nSlotId == SID_LINE_ARROW_START      ||
+          nSlotId == SID_LINE_ARROW_END        ||
+          nSlotId == SID_LINE_ARROWS           ||
+          nSlotId == SID_LINE_ARROW_CIRCLE     ||
+          nSlotId == SID_LINE_CIRCLE_ARROW     ||
+          nSlotId == SID_LINE_ARROW_SQUARE     ||
+          nSlotId == SID_LINE_SQUARE_ARROW) )
+        return;
+
+    // set attributes of line start and ends
+    SdrModel& rModel(rObj.getSdrModelFromSdrObject());
+
+    // arrowhead
+    ::basegfx::B2DPolyPolygon aArrow( getPolygon( RID_SVXSTR_ARROW, rModel ) );
+    if( !aArrow.count() )
+    {
+        ::basegfx::B2DPolygon aNewArrow;
+        aNewArrow.append(::basegfx::B2DPoint(10.0, 0.0));
+        aNewArrow.append(::basegfx::B2DPoint(0.0, 30.0));
+        aNewArrow.append(::basegfx::B2DPoint(20.0, 30.0));
+        aNewArrow.setClosed(true);
+        aArrow.append(aNewArrow);
+    }
+
+    // Circles
+    ::basegfx::B2DPolyPolygon aCircle( getPolygon( RID_SVXSTR_CIRCLE, rModel ) );
+    if( !aCircle.count() )
+    {
+        ::basegfx::B2DPolygon aNewCircle = ::basegfx::utils::createPolygonFromEllipse(::basegfx::B2DPoint(0.0, 0.0), 250.0, 250.0);
+        aNewCircle.setClosed(true);
+        aCircle.append(aNewCircle);
+    }
+
+    // Square
+    ::basegfx::B2DPolyPolygon aSquare( getPolygon( RID_SVXSTR_SQUARE, rModel ) );
+    if( !aSquare.count() )
+    {
+        ::basegfx::B2DPolygon aNewSquare;
+        aNewSquare.append(::basegfx::B2DPoint(0.0, 0.0));
+        aNewSquare.append(::basegfx::B2DPoint(10.0, 0.0));
+        aNewSquare.append(::basegfx::B2DPoint(10.0, 10.0));
+        aNewSquare.append(::basegfx::B2DPoint(0.0, 10.0));
+        aNewSquare.setClosed(true);
+        aSquare.append(aNewSquare);
+    }
+
+    SfxItemSet aSet( mpDoc->GetPool() );
+    mpView->GetAttributes( aSet );
+
+    // #i3908# Here, the default Line Start/End width for arrow construction is
+    // set. To have the same value in all situations (construction) in i3908
+    // it was decided to change the default to 0.03 cm for all situations.
+    ::tools::Long nWidth = 300; // (1/100th mm)
+
+    // determine line width and calculate with it the line end width
+    if( aSet.GetItemState( XATTR_LINEWIDTH ) != SfxItemState::DONTCARE )
+    {
+        ::tools::Long nValue = aSet.Get( XATTR_LINEWIDTH ).GetValue();
+        if( nValue > 0 )
+            nWidth = nValue * 3;
+    }
+
+    switch (nSlotId)
+    {
+        case SID_CONNECTOR_ARROWS:
+        case SID_CONNECTOR_LINE_ARROWS:
+        case SID_CONNECTOR_LINES_ARROWS:
+        case SID_CONNECTOR_CURVE_ARROWS:
+        case SID_LINE_ARROWS:
+        {
+            // connector with arrow ends
+            rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_ARROW), aArrow));
+            rAttr.Put(XLineStartWidthItem(nWidth));
+            rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_ARROW), aArrow));
+            rAttr.Put(XLineEndWidthItem(nWidth));
+        }
+        break;
+
+        case SID_CONNECTOR_ARROW_START:
+        case SID_CONNECTOR_LINE_ARROW_START:
+        case SID_CONNECTOR_LINES_ARROW_START:
+        case SID_CONNECTOR_CURVE_ARROW_START:
+        case SID_LINE_ARROW_START:
+        case SID_LINE_ARROW_CIRCLE:
+        case SID_LINE_ARROW_SQUARE:
+        {
+            // connector with arrow start
+            rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_ARROW), aArrow));
+            rAttr.Put(XLineStartWidthItem(nWidth));
+        }
+        break;
+
+        case SID_CONNECTOR_ARROW_END:
+        case SID_CONNECTOR_LINE_ARROW_END:
+        case SID_CONNECTOR_LINES_ARROW_END:
+        case SID_CONNECTOR_CURVE_ARROW_END:
+        case SID_LINE_ARROW_END:
+        case SID_LINE_CIRCLE_ARROW:
+        case SID_LINE_SQUARE_ARROW:
+        {
+            // connector with arrow end
+            rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_ARROW), aArrow));
+            rAttr.Put(XLineEndWidthItem(nWidth));
+        }
+        break;
+
+        case SID_CONNECTOR_CIRCLES:
+        case SID_CONNECTOR_LINE_CIRCLES:
+        case SID_CONNECTOR_LINES_CIRCLES:
+        case SID_CONNECTOR_CURVE_CIRCLES:
+        {
+            // connector with circle ends
+            rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle));
+            rAttr.Put(XLineStartWidthItem(nWidth));
+            rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle));
+            rAttr.Put(XLineEndWidthItem(nWidth));
+        }
+        break;
+
+        case SID_CONNECTOR_CIRCLE_START:
+        case SID_CONNECTOR_LINE_CIRCLE_START:
+        case SID_CONNECTOR_LINES_CIRCLE_START:
+        case SID_CONNECTOR_CURVE_CIRCLE_START:
+        {
+            // connector with circle start
+            rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle));
+            rAttr.Put(XLineStartWidthItem(nWidth));
+        }
+        break;
+
+        case SID_CONNECTOR_CIRCLE_END:
+        case SID_CONNECTOR_LINE_CIRCLE_END:
+        case SID_CONNECTOR_LINES_CIRCLE_END:
+        case SID_CONNECTOR_CURVE_CIRCLE_END:
+        {
+            // connector with circle ends
+            rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle));
+            rAttr.Put(XLineEndWidthItem(nWidth));
+        }
+        break;
+    }
+
+    // and again, for the still missing ends
+    switch (nSlotId)
+    {
+        case SID_LINE_ARROW_CIRCLE:
+        {
+            // circle end
+            rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle));
+            rAttr.Put(XLineEndWidthItem(nWidth));
+        }
+        break;
+
+        case SID_LINE_CIRCLE_ARROW:
+        {
+            // circle start
+            rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_CIRCLE), aCircle));
+            rAttr.Put(XLineStartWidthItem(nWidth));
+        }
+        break;
+
+        case SID_LINE_ARROW_SQUARE:
+        {
+            // square end
+            rAttr.Put(XLineEndItem(SvxResId(RID_SVXSTR_SQUARE), aSquare));
+            rAttr.Put(XLineEndWidthItem(nWidth));
+        }
+        break;
+
+        case SID_LINE_SQUARE_ARROW:
+        {
+            // square start
+            rAttr.Put(XLineStartItem(SvxResId(RID_SVXSTR_SQUARE), aSquare));
+            rAttr.Put(XLineStartWidthItem(nWidth));
+        }
+        break;
+    }
+}
+
+SdrObjectUniquePtr FuConstructRectangle::CreateDefaultObject(const sal_uInt16 nID, const ::tools::Rectangle& rRectangle)
+{
+    DBG_ASSERT( (nID != SID_DRAW_FONTWORK) && (nID != SID_DRAW_FONTWORK_VERTICAL ), "FuConstRectangle::CreateDefaultObject can not create Fontwork shapes!" );
+
+    // case SID_DRAW_LINE:
+    // case SID_DRAW_XLINE:
+    // case SID_DRAW_MEASURELINE:
+    // case SID_LINE_ARROW_START:
+    // case SID_LINE_ARROW_END:
+    // case SID_LINE_ARROWS:
+    // case SID_LINE_ARROW_CIRCLE:
+    // case SID_LINE_CIRCLE_ARROW:
+    // case SID_LINE_ARROW_SQUARE:
+    // case SID_LINE_SQUARE_ARROW:
+    // case SID_DRAW_RECT:
+    // case SID_DRAW_RECT_NOFILL:
+    // case SID_DRAW_RECT_ROUND:
+    // case SID_DRAW_RECT_ROUND_NOFILL:
+    // case SID_DRAW_SQUARE:
+    // case SID_DRAW_SQUARE_NOFILL:
+    // case SID_DRAW_SQUARE_ROUND:
+    // case SID_DRAW_SQUARE_ROUND_NOFILL:
+    // case SID_DRAW_ELLIPSE:
+    // case SID_DRAW_ELLIPSE_NOFILL:
+    // case SID_DRAW_CIRCLE:
+    // case SID_DRAW_CIRCLE_NOFILL:
+    // case SID_DRAW_CAPTION:
+    // case SID_DRAW_CAPTION_VERTICAL:
+    // case SID_TOOL_CONNECTOR:
+    // case SID_CONNECTOR_ARROW_START:
+    // case SID_CONNECTOR_ARROW_END:
+    // case SID_CONNECTOR_ARROWS:
+    // case SID_CONNECTOR_CIRCLE_START:
+    // case SID_CONNECTOR_CIRCLE_END:
+    // case SID_CONNECTOR_CIRCLES:
+    // case SID_CONNECTOR_LINE:
+    // case SID_CONNECTOR_LINE_ARROW_START:
+    // case SID_CONNECTOR_LINE_ARROW_END:
+    // case SID_CONNECTOR_LINE_ARROWS:
+    // case SID_CONNECTOR_LINE_CIRCLE_START:
+    // case SID_CONNECTOR_LINE_CIRCLE_END:
+    // case SID_CONNECTOR_LINE_CIRCLES:
+    // case SID_CONNECTOR_CURVE:
+    // case SID_CONNECTOR_CURVE_ARROW_START:
+    // case SID_CONNECTOR_CURVE_ARROW_END:
+    // case SID_CONNECTOR_CURVE_ARROWS:
+    // case SID_CONNECTOR_CURVE_CIRCLE_START:
+    // case SID_CONNECTOR_CURVE_CIRCLE_END:
+    // case SID_CONNECTOR_CURVE_CIRCLES:
+    // case SID_CONNECTOR_LINES:
+    // case SID_CONNECTOR_LINES_ARROW_START:
+    // case SID_CONNECTOR_LINES_ARROW_END:
+    // case SID_CONNECTOR_LINES_ARROWS:
+    // case SID_CONNECTOR_LINES_CIRCLE_START:
+    // case SID_CONNECTOR_LINES_CIRCLE_END:
+    // case SID_CONNECTOR_LINES_CIRCLES:
+
+    SdrObjectUniquePtr pObj(SdrObjFactory::MakeNewObject(
+        mpView->getSdrModelFromSdrView(),
+        mpView->GetCurrentObjInventor(),
+        mpView->GetCurrentObjIdentifier()));
+
+    if(pObj)
+    {
+        ::tools::Rectangle aRect(rRectangle);
+
+        if(SID_DRAW_SQUARE == nID ||
+            SID_DRAW_SQUARE_NOFILL == nID ||
+            SID_DRAW_SQUARE_ROUND == nID ||
+            SID_DRAW_SQUARE_ROUND_NOFILL == nID ||
+            SID_DRAW_CIRCLE == nID ||
+            SID_DRAW_CIRCLE_NOFILL == nID)
+        {
+            // force quadratic
+            ImpForceQuadratic(aRect);
+        }
+
+        Point aStart = aRect.TopLeft();
+        Point aEnd = aRect.BottomRight();
+
+        switch(nID)
+        {
+            case SID_DRAW_LINE:
+            case SID_DRAW_XLINE:
+            case SID_LINE_ARROW_START:
+            case SID_LINE_ARROW_END:
+            case SID_LINE_ARROWS:
+            case SID_LINE_ARROW_CIRCLE:
+            case SID_LINE_CIRCLE_ARROW:
+            case SID_LINE_ARROW_SQUARE:
+            case SID_LINE_SQUARE_ARROW:
+            {
+                if( auto pPathObj = dynamic_cast<SdrPathObj *>( pObj.get() ) )
+                {
+                    sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2);
+
+                    ::basegfx::B2DPolygon aB2DPolygon;
+                    aB2DPolygon.append(::basegfx::B2DPoint(aStart.X(), nYMiddle));
+                    aB2DPolygon.append(::basegfx::B2DPoint(aEnd.X(), nYMiddle));
+                    pPathObj->SetPathPoly(::basegfx::B2DPolyPolygon(aB2DPolygon));
+                }
+                else
+                {
+                    OSL_FAIL("Object is NO line object");
+                }
+
+                break;
+            }
+
+            case SID_DRAW_MEASURELINE:
+            {
+                if( auto pMeasureObj = dynamic_cast< SdrMeasureObj *>( pObj.get() ) )
+                {
+                    sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2);
+                    pMeasureObj->SetPoint(Point(aStart.X(), nYMiddle), 0);
+                    pMeasureObj->SetPoint(Point(aEnd.X(), nYMiddle), 1);
+                }
+                else
+                {
+                    OSL_FAIL("Object is NO measure object");
+                }
+
+                break;
+            }
+
+            case SID_TOOL_CONNECTOR:
+            case SID_CONNECTOR_ARROW_START:
+            case SID_CONNECTOR_ARROW_END:
+            case SID_CONNECTOR_ARROWS:
+            case SID_CONNECTOR_CIRCLE_START:
+            case SID_CONNECTOR_CIRCLE_END:
+            case SID_CONNECTOR_CIRCLES:
+            case SID_CONNECTOR_LINE:
+            case SID_CONNECTOR_LINE_ARROW_START:
+            case SID_CONNECTOR_LINE_ARROW_END:
+            case SID_CONNECTOR_LINE_ARROWS:
+            case SID_CONNECTOR_LINE_CIRCLE_START:
+            case SID_CONNECTOR_LINE_CIRCLE_END:
+            case SID_CONNECTOR_LINE_CIRCLES:
+            case SID_CONNECTOR_CURVE:
+            case SID_CONNECTOR_CURVE_ARROW_START:
+            case SID_CONNECTOR_CURVE_ARROW_END:
+            case SID_CONNECTOR_CURVE_ARROWS:
+            case SID_CONNECTOR_CURVE_CIRCLE_START:
+            case SID_CONNECTOR_CURVE_CIRCLE_END:
+            case SID_CONNECTOR_CURVE_CIRCLES:
+            case SID_CONNECTOR_LINES:
+            case SID_CONNECTOR_LINES_ARROW_START:
+            case SID_CONNECTOR_LINES_ARROW_END:
+            case SID_CONNECTOR_LINES_ARROWS:
+            case SID_CONNECTOR_LINES_CIRCLE_START:
+            case SID_CONNECTOR_LINES_CIRCLE_END:
+            case SID_CONNECTOR_LINES_CIRCLES:
+            {
+                if( auto pEdgeObj = dynamic_cast< SdrEdgeObj *>( pObj.get() ) )
+                {
+                    pEdgeObj->SetTailPoint(false, aStart);
+                    pEdgeObj->SetTailPoint(true, aEnd);
+                }
+                else
+                {
+                    OSL_FAIL("Object is NO connector object");
+                }
+
+                break;
+            }
+            case SID_DRAW_CAPTION:
+            case SID_DRAW_CAPTION_VERTICAL:
+            {
+                if( auto pCaptionObj = dynamic_cast< SdrCaptionObj *>( pObj.get() ) )
+                {
+                    bool bIsVertical(SID_DRAW_CAPTION_VERTICAL == nID);
+
+                    pCaptionObj->SetVerticalWriting(bIsVertical);
+
+                    if(bIsVertical)
+                    {
+                        SfxItemSet aSet(pObj->GetMergedItemSet());
+                        aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER));
+                        aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT));
+                        pObj->SetMergedItemSet(aSet);
+                    }
+
+                    // The default text is not inserted anymore.
+
+                    pCaptionObj->SetLogicRect(aRect);
+                    pCaptionObj->SetTailPos(
+                        aRect.TopLeft() - Point(aRect.GetWidth() / 2, aRect.GetHeight() / 2));
+                }
+                else
+                {
+                    OSL_FAIL("Object is NO caption object");
+                }
+
+                break;
+            }
+
+            default:
+            {
+                pObj->SetLogicRect(aRect);
+
+                break;
+            }
+        }
+
+        SfxItemSet aAttr(mpDoc->GetPool());
+        SetStyleSheet(aAttr, pObj.get());
+        SetAttributes(aAttr, pObj.get());
+        SetLineEnds(aAttr, *pObj);
+        pObj->SetMergedItemSet(aAttr);
+    }
+
+    return pObj;
+}
+
+} // end of namespace sd
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */