Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1857 insertions, 0 deletions

diff --git a/sfx2/source/doc/guisaveas.cxx b/sfx2/source/doc/guisaveas.cxx
new file mode 100644
index 000000000..23c75f296
--- /dev/null
+++ b/sfx2/source/doc/guisaveas.cxx
@@ -0,0 +1,1857 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <com/sun/star/ui/dialogs/XExecutableDialog.hpp>
+#include <com/sun/star/ui/dialogs/XFilePicker3.hpp>
+#include <com/sun/star/ui/dialogs/XFilePickerControlAccess.hpp>
+#include <com/sun/star/ui/dialogs/CommonFilePickerElementIds.hpp>
+#include <com/sun/star/ui/dialogs/ExtendedFilePickerElementIds.hpp>
+#include <com/sun/star/ui/dialogs/TemplateDescription.hpp>
+#include <com/sun/star/view/XSelectionSupplier.hpp>
+#include <com/sun/star/beans/PropertyExistException.hpp>
+#include <com/sun/star/beans/XPropertyAccess.hpp>
+#include <com/sun/star/beans/XPropertySet.hpp>
+#include <com/sun/star/beans/XPropertyContainer.hpp>
+#include <com/sun/star/beans/PropertyAttribute.hpp>
+#include <com/sun/star/document/XExporter.hpp>
+#include <com/sun/star/document/XDocumentPropertiesSupplier.hpp>
+#include <com/sun/star/document/XDocumentProperties.hpp>
+#include <com/sun/star/task/ErrorCodeIOException.hpp>
+#include <com/sun/star/task/InteractionHandler.hpp>
+#include <com/sun/star/util/URLTransformer.hpp>
+#include <com/sun/star/util/XURLTransformer.hpp>
+#include <com/sun/star/frame/ModuleManager.hpp>
+#include <com/sun/star/frame/XStorable.hpp>
+#include <com/sun/star/frame/XStorable2.hpp>
+#include <com/sun/star/frame/XDispatchProvider.hpp>
+#include <com/sun/star/frame/XDispatch.hpp>
+#include <com/sun/star/frame/XTitle.hpp>
+#include <com/sun/star/util/XModifiable.hpp>
+#include <com/sun/star/lang/XMultiServiceFactory.hpp>
+
+#include <com/sun/star/util/XCloneable.hpp>
+
+#include <guisaveas.hxx>
+
+#include <sal/log.hxx>
+#include <svl/itemset.hxx>
+#include <svl/eitem.hxx>
+#include <tools/debug.hxx>
+#include <tools/diagnose_ex.h>
+#include <tools/urlobj.hxx>
+#include <comphelper/processfactory.hxx>
+#include <comphelper/propertysequence.hxx>
+#include <comphelper/propertyvalue.hxx>
+#include <comphelper/sequenceashashmap.hxx>
+#include <comphelper/mimeconfighelper.hxx>
+#include <comphelper/lok.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/weld.hxx>
+#include <o3tl/char16_t2wchar_t.hxx>
+
+#include <sfx2/sfxsids.hrc>
+#include <sfx2/strings.hrc>
+#include <sfx2/sfxresid.hxx>
+#include <sfx2/filedlghelper.hxx>
+#include <sfx2/app.hxx>
+#include <sfx2/sfxuno.hxx>
+#include <alienwarn.hxx>
+
+#include <memory>
+#include <string_view>
+
+#include <officecfg/Office/Common.hxx>
+
+#include <vcl/FilterConfigItem.hxx>
+#include <com/sun/star/system/SystemShellExecute.hpp>
+#include <com/sun/star/system/SystemShellExecuteFlags.hpp>
+
+#include <osl/file.hxx>
+
+#ifdef _WIN32
+#include <Shlobj.h>
+#ifdef GetTempPath
+#undef GetTempPath
+#endif
+#endif
+
+// flags that specify requested operation
+#define EXPORT_REQUESTED            1
+#define PDFEXPORT_REQUESTED         2
+#define PDFDIRECTEXPORT_REQUESTED   4
+#define WIDEEXPORT_REQUESTED        8
+#define SAVE_REQUESTED              16
+#define SAVEAS_REQUESTED            32
+#define SAVEACOPY_REQUESTED         64
+#define EPUBEXPORT_REQUESTED       128
+#define EPUBDIRECTEXPORT_REQUESTED 256
+#define SAVEASREMOTE_REQUESTED      -1
+
+// possible statuses of save operation
+#define STATUS_NO_ACTION            0
+#define STATUS_SAVE                 1
+#define STATUS_SAVEAS               2
+#define STATUS_SAVEAS_STANDARDNAME  3
+
+constexpr OUStringLiteral aFilterNameString = u"FilterName";
+constexpr OUStringLiteral aFilterOptionsString = u"FilterOptions";
+constexpr OUStringLiteral aFilterDataString = u"FilterData";
+
+using namespace ::com::sun::star;
+using namespace css::system;
+
+namespace {
+
+sal_uInt16 getSlotIDFromMode( sal_Int16 nStoreMode )
+{
+    // This is a temporary hardcoded solution must be removed when
+    // dialogs do not need parameters in SidSet representation any more
+
+    sal_uInt16 nResult = 0;
+    if ( nStoreMode == EXPORT_REQUESTED || nStoreMode == ( EXPORT_REQUESTED | SAVEACOPY_REQUESTED | WIDEEXPORT_REQUESTED ) )
+        nResult = SID_EXPORTDOC;
+    else if ( nStoreMode == ( EXPORT_REQUESTED | PDFEXPORT_REQUESTED ) )
+        nResult = SID_EXPORTDOCASPDF;
+    else if ( nStoreMode == ( EXPORT_REQUESTED | EPUBEXPORT_REQUESTED ) )
+        nResult = SID_EXPORTDOCASEPUB;
+    else if ( nStoreMode == ( EXPORT_REQUESTED | PDFEXPORT_REQUESTED | PDFDIRECTEXPORT_REQUESTED ) )
+        nResult = SID_DIRECTEXPORTDOCASPDF;
+    else if ( nStoreMode == ( EXPORT_REQUESTED | EPUBEXPORT_REQUESTED | EPUBDIRECTEXPORT_REQUESTED ) )
+        nResult = SID_DIRECTEXPORTDOCASEPUB;
+    else if ( nStoreMode == SAVEAS_REQUESTED || nStoreMode == ( EXPORT_REQUESTED | WIDEEXPORT_REQUESTED ) )
+        nResult = SID_SAVEASDOC;
+    else if ( nStoreMode == SAVEASREMOTE_REQUESTED )
+        nResult = SID_SAVEASREMOTE;
+    else {
+        SAL_WARN( "sfx.doc", "Unacceptable slot name is provided!" );
+    }
+
+    return nResult;
+}
+
+
+sal_Int16 getStoreModeFromSlotName( std::u16string_view aSlotName )
+{
+    sal_Int16 nResult = 0;
+    if ( aSlotName == u"ExportTo" )
+        nResult = EXPORT_REQUESTED;
+    else if ( aSlotName == u"ExportToPDF" )
+        nResult = EXPORT_REQUESTED | PDFEXPORT_REQUESTED;
+    else if ( aSlotName == u"ExportDirectToPDF" )
+        nResult = EXPORT_REQUESTED | PDFEXPORT_REQUESTED | PDFDIRECTEXPORT_REQUESTED;
+    else if ( aSlotName == u"ExportToEPUB" )
+        nResult = EXPORT_REQUESTED | EPUBEXPORT_REQUESTED;
+    else if ( aSlotName == u"ExportDirectToEPUB" )
+        nResult = EXPORT_REQUESTED | EPUBEXPORT_REQUESTED | EPUBDIRECTEXPORT_REQUESTED;
+    else if ( aSlotName == u"Save" )
+        nResult = SAVE_REQUESTED;
+    else if ( aSlotName == u"SaveAs" )
+        nResult = SAVEAS_REQUESTED;
+    else if ( aSlotName == u"SaveAsRemote" )
+        nResult = SAVEASREMOTE_REQUESTED;
+    else
+        throw task::ErrorCodeIOException(
+            (OUString::Concat("getStoreModeFromSlotName(\"") + aSlotName
+             + "): ERRCODE_IO_INVALIDPARAMETER"),
+            uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_INVALIDPARAMETER) );
+
+    return nResult;
+}
+
+
+SfxFilterFlags getMustFlags( sal_Int16 nStoreMode )
+{
+    return ( SfxFilterFlags::EXPORT
+            | ( ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) ? SfxFilterFlags::NONE : SfxFilterFlags::IMPORT ) );
+}
+
+
+SfxFilterFlags getDontFlags( sal_Int16 nStoreMode )
+{
+    return ( SfxFilterFlags::INTERNAL
+            | SfxFilterFlags::NOTINFILEDLG
+            | ( ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) ? SfxFilterFlags::IMPORT : SfxFilterFlags::NONE ) );
+}
+
+
+
+
+class DocumentSettingsGuard
+{
+    uno::Reference< beans::XPropertySet > m_xDocumentSettings;
+    bool m_bPreserveReadOnly;
+    bool m_bReadOnlySupported;
+
+    bool m_bRestoreSettings;
+public:
+    DocumentSettingsGuard( const uno::Reference< frame::XModel >& xModel, bool bReadOnly, bool bRestore )
+    : m_bPreserveReadOnly( false )
+    , m_bReadOnlySupported( false )
+    , m_bRestoreSettings( bRestore )
+    {
+        try
+        {
+            uno::Reference< lang::XMultiServiceFactory > xDocSettingsSupplier( xModel, uno::UNO_QUERY_THROW );
+            m_xDocumentSettings.set(
+                xDocSettingsSupplier->createInstance( "com.sun.star.document.Settings" ),
+                uno::UNO_QUERY_THROW );
+
+            try
+            {
+                OUString aLoadReadonlyString( "LoadReadonly" );
+                m_xDocumentSettings->getPropertyValue( aLoadReadonlyString ) >>= m_bPreserveReadOnly;
+                m_xDocumentSettings->setPropertyValue( aLoadReadonlyString, uno::Any( bReadOnly ) );
+                m_bReadOnlySupported = true;
+            }
+            catch( const uno::Exception& )
+            {}
+        }
+        catch( const uno::Exception& )
+        {}
+
+        if ( bReadOnly && !m_bReadOnlySupported )
+            throw uno::RuntimeException(); // the user could provide the data, so it must be stored
+    }
+
+    ~DocumentSettingsGuard()
+    {
+        if ( m_bRestoreSettings )
+        {
+            try
+            {
+                if ( m_bReadOnlySupported )
+                    m_xDocumentSettings->setPropertyValue( "LoadReadonly", uno::Any( m_bPreserveReadOnly ) );
+            }
+            catch( const uno::Exception& )
+            {
+                TOOLS_WARN_EXCEPTION( "sfx.doc", "" );
+            }
+        }
+    }
+};
+} // anonymous namespace
+
+
+
+class ModelData_Impl
+{
+    SfxStoringHelper* m_pOwner;
+    uno::Reference< frame::XModel > m_xModel;
+    uno::Reference< frame::XStorable > m_xStorable;
+    uno::Reference< frame::XStorable2 > m_xStorable2;
+
+    OUString m_aModuleName;
+    std::unique_ptr<::comphelper::SequenceAsHashMap> m_pDocumentPropsHM;
+    std::unique_ptr<::comphelper::SequenceAsHashMap> m_pModulePropsHM;
+
+    ::comphelper::SequenceAsHashMap m_aMediaDescrHM;
+
+    bool m_bRecommendReadOnly;
+
+public:
+    ModelData_Impl( SfxStoringHelper& aOwner,
+                    const uno::Reference< frame::XModel >& xModel,
+                    const uno::Sequence< beans::PropertyValue >& aMediaDescr );
+
+    ~ModelData_Impl();
+
+    void FreeDocumentProps();
+
+    uno::Reference< frame::XModel > const & GetModel() const;
+    uno::Reference< frame::XStorable > const & GetStorable();
+    uno::Reference< frame::XStorable2 > const & GetStorable2();
+
+    ::comphelper::SequenceAsHashMap& GetMediaDescr() { return m_aMediaDescrHM; }
+
+    bool IsRecommendReadOnly() const { return m_bRecommendReadOnly; }
+
+    const ::comphelper::SequenceAsHashMap& GetDocProps();
+
+    OUString const & GetModuleName();
+    const ::comphelper::SequenceAsHashMap& GetModuleProps();
+
+    void CheckInteractionHandler();
+
+
+    OUString GetDocServiceName();
+    uno::Sequence< beans::PropertyValue > GetDocServiceDefaultFilterCheckFlags( SfxFilterFlags nMust, SfxFilterFlags nDont );
+    uno::Sequence< beans::PropertyValue > GetDocServiceAnyFilter( SfxFilterFlags nMust, SfxFilterFlags nDont );
+    uno::Sequence< beans::PropertyValue > GetPreselectedFilter_Impl( sal_Int16 nStoreMode );
+    uno::Sequence< beans::PropertyValue > GetDocServiceDefaultFilter();
+
+    bool ExecuteFilterDialog_Impl( const OUString& aFilterName );
+
+    sal_Int8 CheckSaveAcceptable( sal_Int8 nCurStatus );
+    sal_Int8 CheckStateForSave();
+
+    sal_Int8 CheckFilter( const OUString& );
+
+    bool CheckFilterOptionsDialogExistence();
+
+    bool OutputFileDialog( sal_Int16 nStoreMode,
+                                const ::comphelper::SequenceAsHashMap& aPreselectedFilterPropsHM,
+                                bool bSetStandardName,
+                                OUString& aSuggestedName,
+                                bool bPreselectPassword,
+                                OUString& aSuggestedDir,
+                                sal_Int16 nDialog,
+                                const OUString& rStandardDir,
+                                const css::uno::Sequence< OUString >& rDenyList
+                                );
+
+    bool ShowDocumentInfoDialog();
+
+    static OUString GetRecommendedExtension( const OUString& aTypeName );
+    OUString GetRecommendedDir( const OUString& aSuggestedDir );
+    OUString GetRecommendedName( const OUString& aSuggestedName,
+                                        const OUString& aTypeName );
+
+};
+
+
+ModelData_Impl::ModelData_Impl( SfxStoringHelper& aOwner,
+                                const uno::Reference< frame::XModel >& xModel,
+                                const uno::Sequence< beans::PropertyValue >& aMediaDescr )
+: m_pOwner( &aOwner )
+, m_xModel( xModel )
+, m_aMediaDescrHM( aMediaDescr )
+, m_bRecommendReadOnly( false )
+{
+    CheckInteractionHandler();
+}
+
+
+ModelData_Impl::~ModelData_Impl()
+{
+    FreeDocumentProps();
+    m_pDocumentPropsHM.reset();
+    m_pModulePropsHM.reset();
+}
+
+
+void ModelData_Impl::FreeDocumentProps()
+{
+    m_pDocumentPropsHM.reset();
+}
+
+
+uno::Reference< frame::XModel > const & ModelData_Impl::GetModel() const
+{
+    if ( !m_xModel.is() )
+        throw uno::RuntimeException();
+
+    return m_xModel;
+}
+
+
+uno::Reference< frame::XStorable > const & ModelData_Impl::GetStorable()
+{
+    if ( !m_xStorable.is() )
+    {
+        m_xStorable.set( m_xModel, uno::UNO_QUERY_THROW );
+    }
+
+    return m_xStorable;
+}
+
+
+uno::Reference< frame::XStorable2 > const & ModelData_Impl::GetStorable2()
+{
+    if ( !m_xStorable2.is() )
+    {
+        m_xStorable2.set( m_xModel, uno::UNO_QUERY_THROW );
+    }
+
+    return m_xStorable2;
+}
+
+
+const ::comphelper::SequenceAsHashMap& ModelData_Impl::GetDocProps()
+{
+    if ( !m_pDocumentPropsHM )
+        m_pDocumentPropsHM.reset( new ::comphelper::SequenceAsHashMap( GetModel()->getArgs() ) );
+
+    return *m_pDocumentPropsHM;
+}
+
+
+OUString const & ModelData_Impl::GetModuleName()
+{
+    if ( m_aModuleName.isEmpty() )
+    {
+        m_aModuleName = m_pOwner->GetModuleManager()->identify(
+                                                uno::Reference< uno::XInterface >( m_xModel, uno::UNO_QUERY ) );
+        if ( m_aModuleName.isEmpty() )
+            throw uno::RuntimeException(); // TODO:
+    }
+    return m_aModuleName;
+}
+
+
+const ::comphelper::SequenceAsHashMap& ModelData_Impl::GetModuleProps()
+{
+    if ( !m_pModulePropsHM )
+    {
+        uno::Sequence< beans::PropertyValue > aModuleProps;
+        m_pOwner->GetModuleManager()->getByName( GetModuleName() ) >>= aModuleProps;
+        if ( !aModuleProps.hasElements() )
+            throw uno::RuntimeException(); // TODO;
+        m_pModulePropsHM.reset( new ::comphelper::SequenceAsHashMap( aModuleProps ) );
+    }
+
+    return *m_pModulePropsHM;
+}
+
+
+OUString ModelData_Impl::GetDocServiceName()
+{
+    return GetModuleProps().getUnpackedValueOrDefault("ooSetupFactoryDocumentService", OUString());
+}
+
+
+void ModelData_Impl::CheckInteractionHandler()
+{
+    const OUString sInteractionHandler {"InteractionHandler"};
+    ::comphelper::SequenceAsHashMap::const_iterator aInteractIter =
+            m_aMediaDescrHM.find( sInteractionHandler );
+
+    if ( aInteractIter == m_aMediaDescrHM.end() )
+    {
+        try {
+            m_aMediaDescrHM[ sInteractionHandler ]
+                <<= task::InteractionHandler::createWithParent( comphelper::getProcessComponentContext(), nullptr);
+        }
+        catch( const uno::Exception& )
+        {
+        }
+    }
+    else
+    {
+        uno::Reference< task::XInteractionHandler > xInteract;
+        DBG_ASSERT( ( aInteractIter->second >>= xInteract ) && xInteract.is(), "Broken interaction handler is provided!\n" );
+    }
+}
+
+
+uno::Sequence< beans::PropertyValue > ModelData_Impl::GetDocServiceDefaultFilter()
+{
+    uno::Sequence< beans::PropertyValue > aProps;
+
+    const OUString aFilterName = GetModuleProps().getUnpackedValueOrDefault( "ooSetupFactoryDefaultFilter", OUString() );
+
+    m_pOwner->GetFilterConfiguration()->getByName( aFilterName ) >>= aProps;
+
+    return aProps;
+}
+
+
+uno::Sequence< beans::PropertyValue > ModelData_Impl::GetDocServiceDefaultFilterCheckFlags( SfxFilterFlags nMust,
+                                                                                            SfxFilterFlags nDont )
+{
+    uno::Sequence< beans::PropertyValue > aFilterProps;
+    uno::Sequence< beans::PropertyValue > aProps = GetDocServiceDefaultFilter();
+    if ( aProps.hasElements() )
+    {
+        ::comphelper::SequenceAsHashMap aFiltHM( aProps );
+        SfxFilterFlags nFlags = static_cast<SfxFilterFlags>(aFiltHM.getUnpackedValueOrDefault("Flags",
+                                                        sal_Int32(0) ));
+        if ( ( ( nFlags & nMust ) == nMust ) && !( nFlags & nDont ) )
+            aFilterProps = aProps;
+    }
+
+    return aFilterProps;
+}
+
+
+uno::Sequence< beans::PropertyValue > ModelData_Impl::GetDocServiceAnyFilter( SfxFilterFlags nMust, SfxFilterFlags nDont )
+{
+    uno::Sequence< beans::NamedValue > aSearchRequest { { "DocumentService", css::uno::Any(GetDocServiceName()) } };
+
+    return ::comphelper::MimeConfigurationHelper::SearchForFilter( m_pOwner->GetFilterQuery(), aSearchRequest, nMust, nDont );
+}
+
+
+uno::Sequence< beans::PropertyValue > ModelData_Impl::GetPreselectedFilter_Impl( sal_Int16 nStoreMode )
+{
+    if ( nStoreMode == SAVEASREMOTE_REQUESTED )
+        nStoreMode = SAVEAS_REQUESTED;
+
+    uno::Sequence< beans::PropertyValue > aFilterProps;
+
+    SfxFilterFlags nMust = getMustFlags( nStoreMode );
+    SfxFilterFlags nDont = getDontFlags( nStoreMode );
+
+    if ( ( nStoreMode != SAVEASREMOTE_REQUESTED ) && ( nStoreMode & PDFEXPORT_REQUESTED ) )
+    {
+        // Preselect PDF-Filter for EXPORT
+        uno::Sequence< beans::NamedValue > aSearchRequest
+        {
+            { "Type", css::uno::Any(OUString("pdf_Portable_Document_Format")) },
+            { "DocumentService", css::uno::Any(GetDocServiceName()) }
+        };
+
+        aFilterProps = ::comphelper::MimeConfigurationHelper::SearchForFilter( m_pOwner->GetFilterQuery(), aSearchRequest, nMust, nDont );
+    }
+    else if ( ( nStoreMode != SAVEASREMOTE_REQUESTED ) && ( nStoreMode & EPUBEXPORT_REQUESTED ) )
+    {
+        // Preselect EPUB filter for export.
+        uno::Sequence<beans::NamedValue> aSearchRequest
+        {
+            { "Type", css::uno::Any(OUString("writer_EPUB_Document")) },
+            { "DocumentService", css::uno::Any(GetDocServiceName()) }
+        };
+
+        aFilterProps = ::comphelper::MimeConfigurationHelper::SearchForFilter( m_pOwner->GetFilterQuery(), aSearchRequest, nMust, nDont );
+    }
+    else
+    {
+        aFilterProps = GetDocServiceDefaultFilterCheckFlags( nMust, nDont );
+
+        if ( !aFilterProps.hasElements() )
+        {
+            // the default filter was not found, use just the first acceptable one
+            aFilterProps = GetDocServiceAnyFilter( nMust, nDont );
+        }
+    }
+
+    return aFilterProps;
+}
+
+
+bool ModelData_Impl::ExecuteFilterDialog_Impl( const OUString& aFilterName )
+{
+    bool bDialogUsed = false;
+
+    try {
+        uno::Sequence < beans::PropertyValue > aProps;
+        uno::Any aAny = m_pOwner->GetFilterConfiguration()->getByName( aFilterName );
+        if ( aAny >>= aProps )
+        {
+            auto pProp = std::find_if(std::cbegin(aProps), std::cend(aProps),
+                [](const beans::PropertyValue& rProp) { return rProp.Name == "UIComponent"; });
+            if (pProp != std::cend(aProps))
+            {
+                OUString aServiceName;
+                pProp->Value >>= aServiceName;
+                if( !aServiceName.isEmpty() )
+                {
+                    uno::Sequence<uno::Any> aDialogArgs(comphelper::InitAnyPropertySequence(
+                    {
+                        {"ParentWindow", uno::Any(SfxStoringHelper::GetModelXWindow(m_xModel))},
+                    }));
+
+                    uno::Reference< ui::dialogs::XExecutableDialog > xFilterDialog(
+                                                comphelper::getProcessServiceFactory()->createInstanceWithArguments(aServiceName, aDialogArgs), uno::UNO_QUERY );
+                    uno::Reference< beans::XPropertyAccess > xFilterProperties( xFilterDialog, uno::UNO_QUERY );
+
+                    if( xFilterDialog.is() && xFilterProperties.is() )
+                    {
+                        bDialogUsed = true;
+
+                        uno::Reference< document::XExporter > xExporter( xFilterDialog, uno::UNO_QUERY );
+                        if( xExporter.is() )
+                            xExporter->setSourceDocument( GetModel() );
+
+                        uno::Sequence< beans::PropertyValue > aPropsForDialog;
+                        GetMediaDescr() >> aPropsForDialog;
+                        xFilterProperties->setPropertyValues( aPropsForDialog );
+
+                        if( !xFilterDialog->execute() )
+                        {
+                            throw task::ErrorCodeIOException(
+                                ("ModelData_Impl::ExecuteFilterDialog_Impl:"
+                                 " ERRCODE_IO_ABORT"),
+                                uno::Reference< uno::XInterface >(),
+                                sal_uInt32(ERRCODE_IO_ABORT));
+                        }
+
+                        const uno::Sequence< beans::PropertyValue > aPropsFromDialog =
+                                                                    xFilterProperties->getPropertyValues();
+                        for ( const auto& rProp : aPropsFromDialog )
+                            GetMediaDescr()[rProp.Name] = rProp.Value;
+                    }
+                }
+            }
+        }
+    }
+    catch( const container::NoSuchElementException& e )
+    {
+        // the filter name is unknown
+        throw task::ErrorCodeIOException(
+            ("ModelData_Impl::ExecuteFilterDialog_Impl: NoSuchElementException"
+             " \"" + e.Message + "\": ERRCODE_IO_ABORT"),
+            uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_INVALIDPARAMETER));
+    }
+    catch( const task::ErrorCodeIOException& )
+    {
+        throw;
+    }
+    catch( const uno::Exception& )
+    {
+        TOOLS_WARN_EXCEPTION("sfx.doc", "ignoring");
+    }
+
+    return bDialogUsed;
+}
+
+
+sal_Int8 ModelData_Impl::CheckSaveAcceptable( sal_Int8 nCurStatus )
+{
+    sal_Int8 nResult = nCurStatus;
+
+    if ( nResult != STATUS_NO_ACTION && GetStorable()->hasLocation() )
+    {
+        // the saving is acceptable
+        // in case the configuration entry is not set or set to false
+        // or in case of version creation
+        if ( officecfg::Office::Common::Save::Document::AlwaysSaveAs::get()
+          && GetMediaDescr().find( OUString("VersionComment") ) == GetMediaDescr().end() )
+        {
+            // notify the user that SaveAs is going to be done
+            std::unique_ptr<weld::MessageDialog> xMessageBox(Application::CreateMessageDialog(SfxStoringHelper::GetModelWindow(m_xModel),
+                                                             VclMessageType::Question, VclButtonsType::OkCancel, SfxResId(STR_NEW_FILENAME_SAVE)));
+            if (xMessageBox->run() == RET_OK)
+                nResult = STATUS_SAVEAS;
+            else
+                nResult = STATUS_NO_ACTION;
+        }
+    }
+
+    return nResult;
+}
+
+
+sal_Int8 ModelData_Impl::CheckStateForSave()
+{
+    // if the document is readonly or a new one a SaveAs operation must be used
+    if ( !GetStorable()->hasLocation() || GetStorable()->isReadonly() )
+        return STATUS_SAVEAS;
+
+    // check acceptable entries for media descriptor
+    ::comphelper::SequenceAsHashMap aAcceptedArgs;
+
+    static const OUStringLiteral aVersionCommentString(u"VersionComment");
+    static const OUStringLiteral aAuthorString(u"Author");
+    static const OUStringLiteral aDontTerminateEdit(u"DontTerminateEdit");
+    static const OUStringLiteral aInteractionHandlerString(u"InteractionHandler");
+    static const OUStringLiteral aStatusIndicatorString(u"StatusIndicator");
+    static const OUStringLiteral aFailOnWarningString(u"FailOnWarning");
+    static const OUStringLiteral aNoFileSync(u"NoFileSync");
+
+    if ( GetMediaDescr().find( aVersionCommentString ) != GetMediaDescr().end() )
+        aAcceptedArgs[ aVersionCommentString ] = GetMediaDescr()[ aVersionCommentString ];
+    if ( GetMediaDescr().find( aAuthorString ) != GetMediaDescr().end() )
+        aAcceptedArgs[ aAuthorString ] = GetMediaDescr()[ aAuthorString ];
+    if ( GetMediaDescr().find( aDontTerminateEdit ) != GetMediaDescr().end() )
+        aAcceptedArgs[ aDontTerminateEdit ] = GetMediaDescr()[ aDontTerminateEdit ];
+    if ( GetMediaDescr().find( aInteractionHandlerString ) != GetMediaDescr().end() )
+        aAcceptedArgs[ aInteractionHandlerString ] = GetMediaDescr()[ aInteractionHandlerString ];
+    if ( GetMediaDescr().find( aStatusIndicatorString ) != GetMediaDescr().end() )
+        aAcceptedArgs[ aStatusIndicatorString ] = GetMediaDescr()[ aStatusIndicatorString ];
+    if ( GetMediaDescr().find( aFailOnWarningString ) != GetMediaDescr().end() )
+        aAcceptedArgs[ aFailOnWarningString ] = GetMediaDescr()[ aFailOnWarningString ];
+    if (GetMediaDescr().find(aNoFileSync) != GetMediaDescr().end())
+        aAcceptedArgs[aNoFileSync] = GetMediaDescr()[aNoFileSync];
+
+    // remove unacceptable entry if there is any
+    DBG_ASSERT( GetMediaDescr().size() == aAcceptedArgs.size(),
+                "Unacceptable parameters are provided in Save request!\n" );
+    if ( GetMediaDescr().size() != aAcceptedArgs.size() )
+        GetMediaDescr() = aAcceptedArgs;
+
+    // check that the old filter is acceptable
+    return CheckFilter( GetDocProps().getUnpackedValueOrDefault(aFilterNameString, OUString()) );
+}
+
+sal_Int8 ModelData_Impl::CheckFilter( const OUString& aFilterName )
+{
+    ::comphelper::SequenceAsHashMap aFiltPropsHM;
+    SfxFilterFlags nFiltFlags = SfxFilterFlags::NONE;
+    if ( !aFilterName.isEmpty() )
+    {
+        // get properties of filter
+        uno::Sequence< beans::PropertyValue > aFilterProps;
+        m_pOwner->GetFilterConfiguration()->getByName( aFilterName ) >>= aFilterProps;
+
+        aFiltPropsHM = ::comphelper::SequenceAsHashMap( aFilterProps );
+        nFiltFlags = static_cast<SfxFilterFlags>(aFiltPropsHM.getUnpackedValueOrDefault("Flags", sal_Int32(0) ));
+    }
+
+    // only a temporary solution until default filter retrieving feature is implemented
+    // then GetDocServiceDefaultFilter() must be used
+    ::comphelper::SequenceAsHashMap aDefFiltPropsHM = GetDocServiceDefaultFilterCheckFlags( SfxFilterFlags::IMPORT | SfxFilterFlags::EXPORT, SfxFilterFlags::NONE );
+    SfxFilterFlags nDefFiltFlags = static_cast<SfxFilterFlags>(aDefFiltPropsHM.getUnpackedValueOrDefault("Flags", sal_Int32(0) ));
+
+    bool bAsk = false;
+
+    // if the old filter is not acceptable
+    // and there is no default filter or it is not acceptable for requested parameters then proceed with saveAs
+    if ( ( aFiltPropsHM.empty() || !( nFiltFlags & SfxFilterFlags::EXPORT ) )
+      && ( aDefFiltPropsHM.empty() || !( nDefFiltFlags & SfxFilterFlags::EXPORT ) || nDefFiltFlags & SfxFilterFlags::INTERNAL ) )
+        return STATUS_SAVEAS;
+
+    // so at this point there is either an acceptable old filter or default one
+    if ( aFiltPropsHM.empty() || !( nFiltFlags & SfxFilterFlags::EXPORT ) )
+    {
+        // so the default filter must be acceptable
+        return STATUS_SAVEAS_STANDARDNAME;
+    }
+    else if ( ( !( nFiltFlags & SfxFilterFlags::OWN ) || ( nFiltFlags & SfxFilterFlags::ALIEN ) )
+           && !aDefFiltPropsHM.empty()
+           && ( nDefFiltFlags & SfxFilterFlags::EXPORT ) && !( nDefFiltFlags & SfxFilterFlags::INTERNAL ))
+    {
+        bAsk = true;
+    }
+
+    // check if EncryptionData supports this output format
+    {
+        OUString aSupportedFilters;
+        const ::comphelper::SequenceAsHashMap& rDocumentProperties = GetDocProps();
+        const css::uno::Sequence<css::beans::NamedValue> aEncryptionData = rDocumentProperties.getUnpackedValueOrDefault("EncryptionData", css::uno::Sequence<css::beans::NamedValue>());
+        if (aEncryptionData != css::uno::Sequence<css::beans::NamedValue>())
+        {
+            for (const css::beans::NamedValue& aNamedValue : aEncryptionData)
+            {
+                if (aNamedValue.Name == "SupportedFilters")
+                {
+                    aNamedValue.Value >>= aSupportedFilters;
+                }
+            }
+        }
+
+        // if 'SupportedFilters' is empty assume that all filters are supported.
+        if (!aSupportedFilters.isEmpty())
+        {
+            const OUString aSelectedFilter = aFiltPropsHM.getUnpackedValueOrDefault("UIName", OUString());
+
+            aSupportedFilters = ";" + aSupportedFilters + ";";
+            const OUString aSearchToken = ";" + aSelectedFilter + ";";
+            bAsk = (aSupportedFilters.indexOf(aSearchToken) < 0);
+        }
+    }
+
+    if (bAsk)
+    {
+        // the default filter is acceptable and the old filter is alien one
+        // so ask to make a saveAs operation
+        const OUString aUIName = aFiltPropsHM.getUnpackedValueOrDefault("UIName", OUString() );
+        const OUString aDefUIName = aDefFiltPropsHM.getUnpackedValueOrDefault("UIName", OUString() );
+        const OUString aPreusedFilterName = GetDocProps().getUnpackedValueOrDefault("PreusedFilterName", OUString() );
+        const OUString aDefType = aDefFiltPropsHM.getUnpackedValueOrDefault( "Type", OUString() );
+        const OUString aDefExtension = GetRecommendedExtension( aDefType );
+
+        if ( aPreusedFilterName != aFilterName && aUIName != aDefUIName )
+        {
+            if ( !SfxStoringHelper::WarnUnacceptableFormat( GetModel(), aUIName, aDefExtension,
+                                                            static_cast<bool>( nDefFiltFlags & SfxFilterFlags::ALIEN ) ) )
+                return STATUS_SAVEAS_STANDARDNAME;
+        }
+    }
+
+    return STATUS_SAVE;
+}
+
+
+bool ModelData_Impl::CheckFilterOptionsDialogExistence()
+{
+    uno::Sequence< beans::NamedValue > aSearchRequest { { "DocumentService", css::uno::Any(GetDocServiceName()) } };
+
+    uno::Reference< container::XEnumeration > xFilterEnum =
+                                    m_pOwner->GetFilterQuery()->createSubSetEnumerationByProperties( aSearchRequest );
+
+    while ( xFilterEnum->hasMoreElements() )
+    {
+        uno::Sequence< beans::PropertyValue > aProps;
+        if ( xFilterEnum->nextElement() >>= aProps )
+        {
+            ::comphelper::SequenceAsHashMap aPropsHM( aProps );
+            if ( !aPropsHM.getUnpackedValueOrDefault("UIComponent", OUString()).isEmpty() )
+                return true;
+        }
+    }
+
+    return false;
+}
+
+
+bool ModelData_Impl::OutputFileDialog( sal_Int16 nStoreMode,
+                                            const ::comphelper::SequenceAsHashMap& aPreselectedFilterPropsHM,
+                                            bool bSetStandardName,
+                                            OUString& aSuggestedName,
+                                            bool bPreselectPassword,
+                                            OUString& aSuggestedDir,
+                                            sal_Int16 nDialog,
+                                            const OUString& rStandardDir,
+                                            const css::uno::Sequence< OUString >& rDenyList)
+{
+    if ( nStoreMode == SAVEASREMOTE_REQUESTED )
+        nStoreMode = SAVEAS_REQUESTED;
+
+    bool bUseFilterOptions = false;
+
+    ::comphelper::SequenceAsHashMap::const_iterator aOverwriteIter =
+                GetMediaDescr().find( OUString("Overwrite") );
+
+    // the file name must be specified if overwrite option is set
+    if ( aOverwriteIter != GetMediaDescr().end() )
+           throw task::ErrorCodeIOException(
+               "ModelData_Impl::OutputFileDialog: ERRCODE_IO_INVALIDPARAMETER",
+               uno::Reference< uno::XInterface >(),
+               sal_uInt32(ERRCODE_IO_INVALIDPARAMETER));
+
+    // no target file name is specified
+    // we need to show the file dialog
+
+    // check if we have a filter which allows for filter options, so we need a corresponding checkbox in the dialog
+    bool bAllowOptions = false;
+
+    // in case of Export, filter options dialog is used if available
+    if( !( nStoreMode & EXPORT_REQUESTED ) || ( nStoreMode & WIDEEXPORT_REQUESTED ) )
+        bAllowOptions = CheckFilterOptionsDialogExistence();
+
+    // get the filename by dialog ...
+    // create the file dialog
+    sal_Int16  aDialogMode = bAllowOptions
+        ? css::ui::dialogs::TemplateDescription::FILESAVE_AUTOEXTENSION_PASSWORD_FILTEROPTIONS
+        : css::ui::dialogs::TemplateDescription::FILESAVE_AUTOEXTENSION_PASSWORD;
+    FileDialogFlags aDialogFlags = FileDialogFlags::NONE;
+
+    if( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) )
+    {
+        if ( (nStoreMode & PDFEXPORT_REQUESTED) || (nStoreMode & EPUBEXPORT_REQUESTED) )
+            aDialogMode = css::ui::dialogs::TemplateDescription::
+                FILESAVE_AUTOEXTENSION;
+        else
+            aDialogMode = css::ui::dialogs::TemplateDescription::
+                FILESAVE_AUTOEXTENSION_SELECTION;
+        aDialogFlags = FileDialogFlags::Export;
+    }
+
+    if( ( nStoreMode & EXPORT_REQUESTED ) && ( nStoreMode & SAVEACOPY_REQUESTED ) && ( nStoreMode & WIDEEXPORT_REQUESTED ) )
+    {
+        aDialogFlags = FileDialogFlags::SaveACopy;
+    }
+
+    std::unique_ptr<sfx2::FileDialogHelper> pFileDlg;
+
+    const OUString aDocServiceName {GetDocServiceName()};
+    DBG_ASSERT( !aDocServiceName.isEmpty(), "No document service for this module set!" );
+
+    SfxFilterFlags nMust = getMustFlags( nStoreMode );
+    SfxFilterFlags nDont = getDontFlags( nStoreMode );
+    weld::Window* pFrameWin = SfxStoringHelper::GetModelWindow(m_xModel);
+    if ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) )
+    {
+        if ( ( nStoreMode & PDFEXPORT_REQUESTED ) && !aPreselectedFilterPropsHM.empty() )
+        {
+            // this is a PDF export
+            // the filter options has been shown already
+            const OUString aFilterUIName = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "UIName", OUString() );
+            pFileDlg.reset(new sfx2::FileDialogHelper( aDialogMode, aDialogFlags, aFilterUIName, u"pdf", rStandardDir, rDenyList, pFrameWin ));
+            pFileDlg->SetCurrentFilter( aFilterUIName );
+        }
+        else if ((nStoreMode & EPUBEXPORT_REQUESTED) && !aPreselectedFilterPropsHM.empty())
+        {
+            // This is an EPUB export, the filter options has been shown already.
+            const OUString aFilterUIName = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "UIName", OUString() );
+            pFileDlg.reset(new sfx2::FileDialogHelper(aDialogMode, aDialogFlags, aFilterUIName, u"epub", rStandardDir, rDenyList, pFrameWin));
+            pFileDlg->SetCurrentFilter(aFilterUIName);
+        }
+        else
+        {
+            // This is the normal dialog
+            pFileDlg.reset(new sfx2::FileDialogHelper( aDialogMode, aDialogFlags, aDocServiceName, nDialog, nMust, nDont, rStandardDir, rDenyList, pFrameWin ));
+        }
+
+        sfx2::FileDialogHelper::Context eCtxt = sfx2::FileDialogHelper::UnknownContext;
+        if ( aDocServiceName == "com.sun.star.drawing.DrawingDocument" )
+            eCtxt = sfx2::FileDialogHelper::DrawExport;
+        else if ( aDocServiceName == "com.sun.star.presentation.PresentationDocument" )
+            eCtxt = sfx2::FileDialogHelper::ImpressExport;
+        else if ( aDocServiceName == "com.sun.star.text.TextDocument" )
+            eCtxt = sfx2::FileDialogHelper::WriterExport;
+        else if ( aDocServiceName == "com.sun.star.sheet.SpreadsheetDocument" )
+            eCtxt = sfx2::FileDialogHelper::CalcExport;
+
+        if ( eCtxt != sfx2::FileDialogHelper::UnknownContext )
+               pFileDlg->SetContext( eCtxt );
+
+        pFileDlg->CreateMatcher( aDocServiceName );
+
+        uno::Reference< ui::dialogs::XFilePicker3 > xFilePicker = pFileDlg->GetFilePicker();
+        uno::Reference< ui::dialogs::XFilePickerControlAccess > xControlAccess( xFilePicker, uno::UNO_QUERY );
+
+        if ( xControlAccess.is() )
+        {
+            xControlAccess->setLabel( ui::dialogs::CommonFilePickerElementIds::PUSHBUTTON_OK, SfxResId(STR_EXPORTBUTTON) );
+            xControlAccess->setLabel( ui::dialogs::CommonFilePickerElementIds::LISTBOX_FILTER_LABEL, SfxResId(STR_LABEL_FILEFORMAT) );
+        }
+    }
+    else
+    {
+        // This is the normal save as dialog
+        pFileDlg.reset(new sfx2::FileDialogHelper( aDialogMode, aDialogFlags, aDocServiceName, nDialog,
+            nMust, nDont, rStandardDir, rDenyList, pFrameWin ));
+        pFileDlg->CreateMatcher( aDocServiceName );
+
+        sfx2::FileDialogHelper::Context eCtxt = sfx2::FileDialogHelper::UnknownContext;
+        if ( aDocServiceName == "com.sun.star.drawing.DrawingDocument" )
+            eCtxt = sfx2::FileDialogHelper::DrawSaveAs;
+        else if ( aDocServiceName == "com.sun.star.presentation.PresentationDocument" )
+            eCtxt = sfx2::FileDialogHelper::ImpressSaveAs;
+        else if ( aDocServiceName == "com.sun.star.text.TextDocument" )
+            eCtxt = sfx2::FileDialogHelper::WriterSaveAs;
+        else if ( aDocServiceName == "com.sun.star.sheet.SpreadsheetDocument" )
+            eCtxt = sfx2::FileDialogHelper::CalcSaveAs;
+
+        if ( eCtxt != sfx2::FileDialogHelper::UnknownContext )
+               pFileDlg->SetContext( eCtxt );
+    }
+
+    OUString aAdjustToType;
+
+    const OUString sFilterNameString(aFilterNameString);
+
+    if ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) )
+    {
+        // it is export, set the preselected filter
+        pFileDlg->SetCurrentFilter( aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "UIName", OUString() ) );
+        aAdjustToType = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "Type", OUString() );
+    }
+    // it is no export, bSetStandardName == true means that user agreed to store document in the default (default default ;-)) format
+    else if ( bSetStandardName || GetStorable()->hasLocation() )
+    {
+        uno::Sequence< beans::PropertyValue > aOldFilterProps;
+        const OUString aOldFilterName = GetDocProps().getUnpackedValueOrDefault( sFilterNameString, OUString() );
+
+        if ( !aOldFilterName.isEmpty() )
+            m_pOwner->GetFilterConfiguration()->getByName( aOldFilterName ) >>= aOldFilterProps;
+
+        ::comphelper::SequenceAsHashMap aOldFiltPropsHM( aOldFilterProps );
+        SfxFilterFlags nOldFiltFlags = static_cast<SfxFilterFlags>(aOldFiltPropsHM.getUnpackedValueOrDefault("Flags", sal_Int32(0) ));
+
+        if ( bSetStandardName || ( nOldFiltFlags & nMust ) != nMust || bool(nOldFiltFlags & nDont) )
+        {
+            // the suggested type will be changed, the extension should be adjusted
+            aAdjustToType = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "Type", OUString() );
+            pFileDlg->SetCurrentFilter( aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "UIName", OUString() ) );
+        }
+        else
+        {
+            pFileDlg->SetCurrentFilter( aOldFiltPropsHM.getUnpackedValueOrDefault(
+                                                        "UIName",
+                                                        OUString() ) );
+        }
+    }
+
+    const OUString aRecommendedDir {GetRecommendedDir( aSuggestedDir )};
+    if ( !aRecommendedDir.isEmpty() )
+        pFileDlg->SetDisplayFolder( aRecommendedDir );
+    const OUString aRecommendedName {GetRecommendedName( aSuggestedName, aAdjustToType )};
+    if ( !aRecommendedName.isEmpty() )
+        pFileDlg->SetFileName( aRecommendedName );
+
+    uno::Reference < view::XSelectionSupplier > xSel( GetModel()->getCurrentController(), uno::UNO_QUERY );
+    if ( xSel.is() && xSel->getSelection().hasValue() )
+        GetMediaDescr()[OUString("SelectionOnly")] <<= true;
+
+    // This is a temporary hardcoded solution must be removed when
+    // dialogs do not need parameters in SidSet representation any more
+    sal_uInt16 nSlotID = getSlotIDFromMode( nStoreMode );
+    if ( !nSlotID )
+        throw lang::IllegalArgumentException(); // TODO:
+
+    // generate SidSet from MediaDescriptor and provide it into FileDialog
+    // than merge changed SidSet back
+    std::optional<SfxAllItemSet> pDialogParams( SfxGetpApp()->GetPool() );
+    TransformParameters( nSlotID,
+                         GetMediaDescr().getAsConstPropertyValueList(),
+                         *pDialogParams );
+
+    if ( bPreselectPassword && !pDialogParams->HasItem( SID_ENCRYPTIONDATA ) )
+    {
+        // the file dialog preselects the password checkbox if the provided mediadescriptor has encryption data entry
+        // after dialog execution the password interaction flag will be either removed or not
+        pDialogParams->Put( SfxBoolItem( SID_PASSWORDINTERACTION, true ) );
+    }
+
+    // aFilterName is a pure output parameter, pDialogParams is an in/out parameter
+    OUString aFilterName;
+    if ( pFileDlg->Execute( pDialogParams, aFilterName ) != ERRCODE_NONE )
+    {
+        throw task::ErrorCodeIOException(
+            "ModelData_Impl::OutputFileDialog: ERRCODE_IO_ABORT",
+            uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT));
+    }
+
+    // the following two arguments can not be converted in MediaDescriptor,
+    // so they should be removed from the ItemSet after retrieving
+    const SfxBoolItem* pRecommendReadOnly = SfxItemSet::GetItem<SfxBoolItem>(&*pDialogParams, SID_RECOMMENDREADONLY, false);
+    m_bRecommendReadOnly = ( pRecommendReadOnly && pRecommendReadOnly->GetValue() );
+    pDialogParams->ClearItem( SID_RECOMMENDREADONLY );
+
+    uno::Sequence< beans::PropertyValue > aPropsFromDialog;
+    TransformItems( nSlotID, *pDialogParams, aPropsFromDialog );
+    GetMediaDescr() << aPropsFromDialog;
+
+    // get the path from the dialog
+    INetURLObject aURL( pFileDlg->GetPath() );
+    // the path should be provided outside since it might be used for further calls to the dialog
+    aSuggestedName = aURL.GetLastName(INetURLObject::DecodeMechanism::WithCharset);
+    aSuggestedDir = pFileDlg->GetDisplayDirectory();
+
+    // old filter options should be cleared in case different filter is used
+
+    const OUString aFilterFromMediaDescr = GetMediaDescr().getUnpackedValueOrDefault( sFilterNameString, OUString() );
+    const OUString aOldFilterName = GetDocProps().getUnpackedValueOrDefault( sFilterNameString, OUString() );
+
+    const OUString sFilterOptionsString(aFilterOptionsString);
+    const OUString sFilterDataString(aFilterDataString);
+
+    if ( aFilterName == aFilterFromMediaDescr )
+    {
+        // preserve current settings if any
+        // if there no current settings and the name is the same
+        // as old filter name use old filter settings
+
+        if ( aFilterFromMediaDescr == aOldFilterName )
+        {
+            ::comphelper::SequenceAsHashMap::const_iterator aIter =
+                                        GetDocProps().find( sFilterOptionsString );
+            if ( aIter != GetDocProps().end()
+              && GetMediaDescr().find( sFilterOptionsString ) == GetMediaDescr().end() )
+                GetMediaDescr()[aIter->first] = aIter->second;
+
+            aIter = GetDocProps().find( sFilterDataString );
+            if ( aIter != GetDocProps().end()
+              && GetMediaDescr().find( sFilterDataString ) == GetMediaDescr().end() )
+                GetMediaDescr()[aIter->first] = aIter->second;
+        }
+    }
+    else
+    {
+        GetMediaDescr().erase( sFilterDataString );
+        GetMediaDescr().erase( sFilterOptionsString );
+
+        if ( aFilterName == aOldFilterName )
+        {
+            // merge filter option of the document filter
+
+            ::comphelper::SequenceAsHashMap::const_iterator aIter =
+                                GetDocProps().find( sFilterOptionsString );
+            if ( aIter != GetDocProps().end() )
+                GetMediaDescr()[aIter->first] = aIter->second;
+
+            aIter = GetDocProps().find( sFilterDataString );
+            if ( aIter != GetDocProps().end() )
+                GetMediaDescr()[aIter->first] = aIter->second;
+        }
+    }
+
+    uno::Reference< ui::dialogs::XFilePickerControlAccess > xExtFileDlg( pFileDlg->GetFilePicker(), uno::UNO_QUERY );
+    if ( xExtFileDlg.is() )
+    {
+        if ( SfxStoringHelper::CheckFilterOptionsAppearance( m_pOwner->GetFilterConfiguration(), aFilterName ) )
+            bUseFilterOptions = true;
+
+        if ( ( !( nStoreMode & EXPORT_REQUESTED ) || ( nStoreMode & WIDEEXPORT_REQUESTED ) ) && bUseFilterOptions )
+        {
+            try
+            {
+                // for exporters: always show dialog if format uses options
+                // for save: show dialog if format uses options and no options given or if forced by user
+                uno::Any aVal =
+                        xExtFileDlg->getValue( ui::dialogs::ExtendedFilePickerElementIds::CHECKBOX_FILTEROPTIONS, 0 );
+
+                aVal >>= bUseFilterOptions;
+                if ( !bUseFilterOptions )
+                    bUseFilterOptions =
+                      ( GetMediaDescr().find( sFilterDataString ) == GetMediaDescr().end()
+                      && GetMediaDescr().find( sFilterOptionsString ) == GetMediaDescr().end() );
+            }
+            catch( const lang::IllegalArgumentException& )
+            {}
+        }
+    }
+
+    // merge in results of the dialog execution
+    GetMediaDescr()[OUString("URL")] <<= aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE );
+    GetMediaDescr()[sFilterNameString] <<= aFilterName;
+
+    return bUseFilterOptions;
+}
+
+
+bool ModelData_Impl::ShowDocumentInfoDialog()
+{
+    bool bDialogUsed = false;
+
+    try {
+        uno::Reference< frame::XController > xController = GetModel()->getCurrentController();
+        if ( xController.is() )
+        {
+            uno::Reference< frame::XDispatchProvider > xFrameDispatch( xController->getFrame(), uno::UNO_QUERY );
+            if ( xFrameDispatch.is() )
+            {
+                util::URL aURL;
+                aURL.Complete = ".uno:SetDocumentProperties";
+
+                uno::Reference < util::XURLTransformer > xTransformer( util::URLTransformer::create( comphelper::getProcessComponentContext() ) );
+                if ( xTransformer->parseStrict( aURL ) )
+                {
+                    uno::Reference< frame::XDispatch > xDispatch = xFrameDispatch->queryDispatch(
+                                                                                aURL,
+                                                                                "_self",
+                                                                                0 );
+                    if ( xDispatch.is() )
+                    {
+                        // tdf#119206 use (abuse?) a SynchronMode of true,
+                        // which will become SfxRequest::IsSynchronCall of true
+                        // in SfxObjectShell::ExecFile_Impl to request that we
+                        // do not want the properties dialog to be run async
+                        uno::Sequence< beans::PropertyValue > aProperties{
+                            comphelper::makePropertyValue("SynchronMode", true)
+                        };
+                        xDispatch->dispatch(aURL, aProperties);
+                        bDialogUsed = true;
+                    }
+                }
+            }
+        }
+    }
+    catch ( const uno::Exception& )
+    {
+    }
+
+    return bDialogUsed;
+}
+
+
+OUString ModelData_Impl::GetRecommendedExtension( const OUString& aTypeName )
+{
+    if ( aTypeName.isEmpty() )
+       return OUString();
+
+    uno::Reference< container::XNameAccess > xTypeDetection(
+       comphelper::getProcessServiceFactory()->createInstance("com.sun.star.document.TypeDetection"),
+       uno::UNO_QUERY );
+    if ( xTypeDetection.is() )
+    {
+       uno::Sequence< beans::PropertyValue > aTypeNameProps;
+       if ( ( xTypeDetection->getByName( aTypeName ) >>= aTypeNameProps ) && aTypeNameProps.hasElements() )
+       {
+           ::comphelper::SequenceAsHashMap aTypeNamePropsHM( aTypeNameProps );
+           uno::Sequence< OUString > aExtensions = aTypeNamePropsHM.getUnpackedValueOrDefault(
+                                           "Extensions",
+                                           ::uno::Sequence< OUString >() );
+           if ( aExtensions.hasElements() )
+               return aExtensions[0];
+       }
+    }
+
+    return OUString();
+}
+
+
+OUString ModelData_Impl::GetRecommendedDir( const OUString& aSuggestedDir )
+{
+    if ( ( !aSuggestedDir.isEmpty() || GetStorable()->hasLocation() )
+      && !GetMediaDescr().getUnpackedValueOrDefault("RepairPackage", false ) )
+    {
+        INetURLObject aLocation;
+        if ( !aSuggestedDir.isEmpty() )
+            aLocation = INetURLObject( aSuggestedDir );
+        else
+        {
+            const OUString aOldURL = GetStorable()->getLocation();
+            if ( !aOldURL.isEmpty() )
+            {
+                INetURLObject aTmp( aOldURL );
+                if ( aTmp.removeSegment() )
+                    aLocation = aTmp;
+            }
+
+            if ( aLocation.HasError() )
+                aLocation = INetURLObject();
+        }
+
+        OUString sLocationURL( aLocation.GetMainURL( INetURLObject::DecodeMechanism::NONE ) );
+        bool bIsInTempPath( false );
+        OUString sSysTempPath;
+        if( osl::FileBase::getTempDirURL( sSysTempPath ) == osl::FileBase::E_None )
+            bIsInTempPath = !sSysTempPath.isEmpty() && sLocationURL.startsWith( sSysTempPath );
+#ifdef _WIN32
+        if( !bIsInTempPath )
+        {
+            wchar_t sPath[MAX_PATH+1];
+            HRESULT hRes = SHGetFolderPathW( nullptr, CSIDL_INTERNET_CACHE, nullptr, SHGFP_TYPE_CURRENT, sPath );
+            if( SUCCEEDED(hRes) )
+            {
+                OUString sTempINetFiles;
+                if( osl::FileBase::getFileURLFromSystemPath(OUString(o3tl::toU(sPath)), sTempINetFiles) == osl::FileBase::E_None )
+                    bIsInTempPath = !sTempINetFiles.isEmpty() && sLocationURL.startsWith( sTempINetFiles );
+            }
+        }
+#endif
+        // Suggest somewhere other than the system's temp directory
+        if( bIsInTempPath )
+            aLocation = INetURLObject();
+
+        aLocation.setFinalSlash();
+        if ( !aLocation.HasError() )
+            return aLocation.GetMainURL( INetURLObject::DecodeMechanism::NONE );
+
+        return OUString();
+    }
+
+    return OUString();
+}
+
+
+OUString ModelData_Impl::GetRecommendedName( const OUString& aSuggestedName, const OUString& aTypeName )
+{
+    // the last used name might be provided by aSuggestedName from the old selection, or from the MediaDescriptor
+    if ( !aSuggestedName.isEmpty() )
+        return aSuggestedName;
+
+    OUString aRecommendedName{ INetURLObject(GetStorable()->getLocation())
+                                   .GetLastName(INetURLObject::DecodeMechanism::WithCharset) };
+    if ( aRecommendedName.isEmpty() )
+    {
+        try {
+            uno::Reference< frame::XTitle > xTitle( GetModel(), uno::UNO_QUERY_THROW );
+            aRecommendedName = xTitle->getTitle();
+        } catch( const uno::Exception& ) {}
+    }
+
+    if ( !aRecommendedName.isEmpty() && !aTypeName.isEmpty() )
+    {
+        // adjust the extension to the type
+        uno::Reference< container::XNameAccess > xTypeDetection(
+            comphelper::getProcessServiceFactory()->createInstance("com.sun.star.document.TypeDetection"),
+            uno::UNO_QUERY );
+        if ( xTypeDetection.is() )
+        {
+            INetURLObject aObj( rtl::OUStringConcatenation("c:/" + aRecommendedName), INetProtocol::File,
+                    INetURLObject::EncodeMechanism::All, RTL_TEXTENCODING_UTF8, FSysStyle::Dos );
+
+            const OUString aExtension = GetRecommendedExtension( aTypeName );
+            if ( !aExtension.isEmpty() )
+                aObj.SetExtension( aExtension );
+
+            aRecommendedName = aObj.GetLastName(INetURLObject::DecodeMechanism::WithCharset);
+        }
+    }
+
+    return aRecommendedName;
+}
+
+
+
+
+SfxStoringHelper::SfxStoringHelper()
+{
+}
+
+
+uno::Reference< container::XNameAccess > const & SfxStoringHelper::GetFilterConfiguration()
+{
+    if ( !m_xFilterCFG.is() )
+    {
+        m_xFilterCFG.set( comphelper::getProcessServiceFactory()->createInstance("com.sun.star.document.FilterFactory"),
+                          uno::UNO_QUERY_THROW );
+    }
+
+    return m_xFilterCFG;
+}
+
+
+uno::Reference< container::XContainerQuery > const & SfxStoringHelper::GetFilterQuery()
+{
+    if ( !m_xFilterQuery.is() )
+    {
+        m_xFilterQuery.set( GetFilterConfiguration(), uno::UNO_QUERY_THROW );
+    }
+
+    return m_xFilterQuery;
+}
+
+
+uno::Reference< css::frame::XModuleManager2 > const & SfxStoringHelper::GetModuleManager()
+{
+    if ( !m_xModuleManager.is() )
+    {
+        m_xModuleManager = frame::ModuleManager::create(
+            comphelper::getProcessComponentContext() );
+    }
+
+    return m_xModuleManager;
+}
+
+bool SfxStoringHelper::GUIStoreModel( const uno::Reference< frame::XModel >& xModel,
+                                            std::u16string_view aSlotName,
+                                            uno::Sequence< beans::PropertyValue >& aArgsSequence,
+                                            bool bPreselectPassword,
+                                            SignatureState nDocumentSignatureState )
+{
+    ModelData_Impl aModelData( *this, xModel, aArgsSequence );
+
+    bool bDialogUsed = false;
+
+    INetURLObject aURL;
+
+    bool bSetStandardName = false; // can be set only for SaveAs
+
+    // parse the slot name
+    bool bRemote = false;
+    sal_Int16 nStoreMode = getStoreModeFromSlotName( aSlotName );
+
+    if ( nStoreMode == SAVEASREMOTE_REQUESTED )
+    {
+        nStoreMode = SAVEAS_REQUESTED;
+        bRemote = true;
+    }
+
+    sal_Int8 nStatusSave = STATUS_NO_ACTION;
+
+    ::comphelper::SequenceAsHashMap::const_iterator aSaveACopyIter =
+                        aModelData.GetMediaDescr().find( OUString("SaveACopy") );
+    if ( aSaveACopyIter != aModelData.GetMediaDescr().end() )
+    {
+        bool bSaveACopy = false;
+        aSaveACopyIter->second >>= bSaveACopy;
+        if ( bSaveACopy )
+            nStoreMode = EXPORT_REQUESTED | SAVEACOPY_REQUESTED | WIDEEXPORT_REQUESTED;
+    }
+    // handle the special cases
+    if ( nStoreMode & SAVEAS_REQUESTED )
+    {
+        ::comphelper::SequenceAsHashMap::const_iterator aSaveToIter =
+                        aModelData.GetMediaDescr().find( OUString("SaveTo") );
+        if ( aSaveToIter != aModelData.GetMediaDescr().end() )
+        {
+            bool bWideExport = false;
+            aSaveToIter->second >>= bWideExport;
+            if ( bWideExport )
+                nStoreMode = EXPORT_REQUESTED | WIDEEXPORT_REQUESTED;
+        }
+
+        // if saving is not acceptable the warning must be shown even in case of SaveAs operation
+        if ( ( nStoreMode & SAVEAS_REQUESTED ) && aModelData.CheckSaveAcceptable( STATUS_SAVEAS ) == STATUS_NO_ACTION )
+            throw task::ErrorCodeIOException(
+                "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT",
+                uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT));
+    }
+    else if ( nStoreMode & SAVE_REQUESTED )
+    {
+        // if saving is not acceptable by the configuration the warning must be shown
+        nStatusSave = aModelData.CheckSaveAcceptable( STATUS_SAVE );
+
+        if ( nStatusSave == STATUS_NO_ACTION )
+            throw task::ErrorCodeIOException(
+                "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT",
+                uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT));
+        else if ( nStatusSave == STATUS_SAVE )
+        {
+            // check whether it is possible to use save operation
+            nStatusSave = aModelData.CheckStateForSave();
+        }
+
+        if ( nStatusSave == STATUS_NO_ACTION )
+        {
+            throw task::ErrorCodeIOException(
+                "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT",
+                uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT));
+        }
+        else if ( nStatusSave != STATUS_SAVE )
+        {
+            // this should be a usual SaveAs operation
+            nStoreMode = SAVEAS_REQUESTED;
+            if ( nStatusSave == STATUS_SAVEAS_STANDARDNAME )
+                bSetStandardName = true;
+        }
+    }
+
+    if (!comphelper::LibreOfficeKit::isActive() && !( nStoreMode & EXPORT_REQUESTED ) )
+    {
+        // if it is no export, warn user that the signature will be removed
+        if (  SignatureState::OK == nDocumentSignatureState
+           || SignatureState::INVALID == nDocumentSignatureState
+           || SignatureState::NOTVALIDATED == nDocumentSignatureState
+           || SignatureState::PARTIAL_OK == nDocumentSignatureState)
+        {
+            std::unique_ptr<weld::MessageDialog> xMessageBox(Application::CreateMessageDialog(SfxStoringHelper::GetModelWindow(xModel),
+                                                             VclMessageType::Question, VclButtonsType::YesNo, SfxResId(RID_SVXSTR_XMLSEC_QUERY_LOSINGSIGNATURE)));
+            if (xMessageBox->run() != RET_YES)
+            {
+                // the user has decided not to store the document
+                throw task::ErrorCodeIOException(
+                    "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT (Preserve Signature)",
+                    uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT));
+            }
+        }
+    }
+
+    if ( nStoreMode & SAVE_REQUESTED && nStatusSave == STATUS_SAVE )
+    {
+        // Document properties can contain streams that should be freed before storing
+        aModelData.FreeDocumentProps();
+
+        if ( aModelData.GetStorable2().is() )
+        {
+            try
+            {
+                aModelData.GetStorable2()->storeSelf( aModelData.GetMediaDescr().getAsConstPropertyValueList() );
+            }
+            catch (const lang::IllegalArgumentException&)
+            {
+                TOOLS_WARN_EXCEPTION("sfx.doc", "Ignoring parameters! ModelData considers this illegal");
+                aModelData.GetStorable()->store();
+            }
+        }
+        else
+        {
+            OSL_FAIL( "XStorable2 is not supported by the model!" );
+            aModelData.GetStorable()->store();
+        }
+
+        return false;
+    }
+
+    // preselect a filter for the storing process
+    uno::Sequence< beans::PropertyValue > aFilterProps = aModelData.GetPreselectedFilter_Impl( nStoreMode );
+
+    DBG_ASSERT( aFilterProps.hasElements(), "No filter for storing!\n" );
+    if ( !aFilterProps.hasElements() )
+        throw task::ErrorCodeIOException(
+            "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_INVALIDPARAMETER",
+            uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_INVALIDPARAMETER));
+
+    ::comphelper::SequenceAsHashMap aFilterPropsHM( aFilterProps );
+    OUString aFilterName = aFilterPropsHM.getUnpackedValueOrDefault( "Name", OUString() );
+
+    const OUString sFilterNameString(aFilterNameString);
+
+    const OUString aFilterFromMediaDescr = aModelData.GetMediaDescr().getUnpackedValueOrDefault( sFilterNameString, OUString() );
+    const OUString aOldFilterName = aModelData.GetDocProps().getUnpackedValueOrDefault( sFilterNameString, OUString() );
+
+    bool bUseFilterOptions = false;
+    ::comphelper::SequenceAsHashMap::const_iterator aFileNameIter = aModelData.GetMediaDescr().find( OUString("URL") );
+
+    const OUString sFilterOptionsString(aFilterOptionsString);
+    const OUString sFilterDataString(aFilterDataString);
+
+    bool bPDFOptions = (nStoreMode & PDFEXPORT_REQUESTED) && !(nStoreMode & PDFDIRECTEXPORT_REQUESTED);
+    bool bEPUBOptions = (nStoreMode & EPUBEXPORT_REQUESTED) && !(nStoreMode & EPUBDIRECTEXPORT_REQUESTED);
+    if ( ( nStoreMode & EXPORT_REQUESTED ) && (bPDFOptions || bEPUBOptions) )
+    {
+        // this is PDF or EPUB export, the filter options dialog should be shown before the export
+        aModelData.GetMediaDescr()[sFilterNameString] <<= aFilterName;
+        if ( aModelData.GetMediaDescr().find( "FilterFlags" ) == aModelData.GetMediaDescr().end()
+          && aModelData.GetMediaDescr().find( sFilterOptionsString ) == aModelData.GetMediaDescr().end()
+          && aModelData.GetMediaDescr().find( sFilterDataString ) == aModelData.GetMediaDescr().end() )
+        {
+            // execute filter options dialog since no options are set in the media descriptor
+            if ( aModelData.ExecuteFilterDialog_Impl( aFilterName ) )
+                bDialogUsed = true;
+        }
+    }
+
+    if ( aFileNameIter == aModelData.GetMediaDescr().end() )
+    {
+        sal_Int16 nDialog = SFX2_IMPL_DIALOG_CONFIG;
+
+        if( bRemote )
+        {
+            nDialog = SFX2_IMPL_DIALOG_REMOTE;
+        }
+        else
+        {
+            ::comphelper::SequenceAsHashMap::const_iterator aDlgIter =
+                aModelData.GetMediaDescr().find( OUString("UseSystemDialog") );
+            if ( aDlgIter != aModelData.GetMediaDescr().end() )
+            {
+                bool bUseSystemDialog = true;
+                if ( aDlgIter->second >>= bUseSystemDialog )
+                {
+                    if ( bUseSystemDialog )
+                        nDialog = SFX2_IMPL_DIALOG_SYSTEM;
+                    else
+                        nDialog = SFX2_IMPL_DIALOG_OOO;
+                }
+            }
+        }
+
+        // The Dispatch supports parameter FolderName that overwrites SuggestedSaveAsDir
+        OUString aSuggestedDir = aModelData.GetMediaDescr().getUnpackedValueOrDefault("FolderName", OUString() );
+        if ( aSuggestedDir.isEmpty() )
+        {
+            aSuggestedDir = aModelData.GetMediaDescr().getUnpackedValueOrDefault("SuggestedSaveAsDir", OUString() );
+            if ( aSuggestedDir.isEmpty() )
+                aSuggestedDir = aModelData.GetDocProps().getUnpackedValueOrDefault("SuggestedSaveAsDir", OUString() );
+        }
+
+        OUString aSuggestedName = aModelData.GetMediaDescr().getUnpackedValueOrDefault("SuggestedSaveAsName", OUString() );
+        if ( aSuggestedName.isEmpty() )
+            aSuggestedName = aModelData.GetDocProps().getUnpackedValueOrDefault("SuggestedSaveAsName", OUString() );
+
+        OUString sStandardDir;
+        ::comphelper::SequenceAsHashMap::const_iterator aStdDirIter =
+            aModelData.GetMediaDescr().find( OUString("StandardDir") );
+        if ( aStdDirIter != aModelData.GetMediaDescr().end() )
+            aStdDirIter->second >>= sStandardDir;
+
+        css::uno::Sequence< OUString >  aDenyList;
+
+        ::comphelper::SequenceAsHashMap::const_iterator aDenyListIter =
+            aModelData.GetMediaDescr().find( OUString("DenyList") );
+        if ( aDenyListIter != aModelData.GetMediaDescr().end() )
+            aDenyListIter->second >>= aDenyList;
+
+        for (;;)
+        {
+            // in case the dialog is opened a second time the folder should be the same as previously navigated to by the user, not what was handed over by initial parameters
+            bUseFilterOptions = aModelData.OutputFileDialog( nStoreMode, aFilterProps, bSetStandardName, aSuggestedName, bPreselectPassword, aSuggestedDir, nDialog, sStandardDir, aDenyList );
+            if ( nStoreMode == SAVEAS_REQUESTED )
+            {
+                // in case of saving check filter for possible alien warning
+                const OUString aSelFilterName = aModelData.GetMediaDescr().getUnpackedValueOrDefault( sFilterNameString, OUString() );
+                sal_Int8 nStatusFilterSave = aModelData.CheckFilter( aSelFilterName );
+                if ( nStatusFilterSave == STATUS_SAVEAS_STANDARDNAME )
+                {
+                    // switch to best filter
+                    bSetStandardName = true;
+                }
+                else if ( nStatusFilterSave == STATUS_SAVE )
+                {
+                    // user confirmed alien filter or "good" filter is used
+                    break;
+                }
+            }
+            else
+                break;
+        }
+
+        bDialogUsed = true;
+        aFileNameIter = aModelData.GetMediaDescr().find( OUString("URL") );
+    }
+    else
+    {
+        // the target file name is provided so check if new filter options
+        // are provided or old options can be used
+        if ( aFilterFromMediaDescr == aOldFilterName )
+        {
+            ::comphelper::SequenceAsHashMap::const_iterator aIter =
+                                            aModelData.GetDocProps().find( sFilterOptionsString );
+            if ( aIter != aModelData.GetDocProps().end()
+              && aModelData.GetMediaDescr().find( sFilterOptionsString ) == aModelData.GetMediaDescr().end() )
+                aModelData.GetMediaDescr()[aIter->first] = aIter->second;
+
+            aIter = aModelData.GetDocProps().find( sFilterDataString );
+            if ( aIter != aModelData.GetDocProps().end()
+              && aModelData.GetMediaDescr().find( sFilterDataString ) == aModelData.GetMediaDescr().end() )
+                aModelData.GetMediaDescr()[aIter->first] = aIter->second;
+        }
+    }
+
+    if ( aFileNameIter != aModelData.GetMediaDescr().end() )
+    {
+        OUString aFileName;
+        aFileNameIter->second >>= aFileName;
+        aURL.SetURL( aFileName );
+        DBG_ASSERT( aURL.GetProtocol() != INetProtocol::NotValid, "Illegal URL!" );
+
+        ::comphelper::SequenceAsHashMap::const_iterator aIter =
+                                aModelData.GetMediaDescr().find( sFilterNameString );
+
+        if ( aIter != aModelData.GetMediaDescr().end() )
+            aIter->second >>= aFilterName;
+        else
+            aModelData.GetMediaDescr()[sFilterNameString] <<= aFilterName;
+
+        DBG_ASSERT( !aFilterName.isEmpty(), "Illegal filter!" );
+    }
+    else
+    {
+        SAL_WARN( "sfx.doc", "This code must be unreachable!" );
+        throw task::ErrorCodeIOException(
+            "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_INVALIDPARAMETER",
+            uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_INVALIDPARAMETER));
+    }
+
+    ::comphelper::SequenceAsHashMap::const_iterator aIter =
+                            aModelData.GetMediaDescr().find( OUString("FilterFlags") );
+    bool bFilterFlagsSet = ( aIter != aModelData.GetMediaDescr().end() );
+
+    // check if the filter Dialog has not been called before
+    if( !( nStoreMode & PDFEXPORT_REQUESTED ) && !( nStoreMode & EPUBEXPORT_REQUESTED ) && !bFilterFlagsSet
+        && ( ( nStoreMode & EXPORT_REQUESTED ) || bUseFilterOptions ) )
+    {
+        // execute filter options dialog
+        if ( aModelData.ExecuteFilterDialog_Impl( aFilterName ) )
+        {
+            bDialogUsed = true;
+            // check if the file is a pdf or not and change the storing mode at convenience
+            if (aFilterName.endsWith("pdf_Export"))
+                nStoreMode = EXPORT_REQUESTED | PDFEXPORT_REQUESTED;
+        }
+    }
+
+    // so the arguments will not change any more and can be stored to the main location
+    aArgsSequence = aModelData.GetMediaDescr().getAsConstPropertyValueList();
+
+    // store the document and handle it's docinfo
+
+    DocumentSettingsGuard aSettingsGuard( aModelData.GetModel(), aModelData.IsRecommendReadOnly(), nStoreMode & EXPORT_REQUESTED );
+
+    OSL_ENSURE( aModelData.GetMediaDescr().find( OUString( "Password" ) ) == aModelData.GetMediaDescr().end(), "The Password property of MediaDescriptor should not be used here!" );
+    if ( officecfg::Office::Common::Save::Document::EditProperty::get()
+      && ( !aModelData.GetStorable()->hasLocation()
+          || INetURLObject( aModelData.GetStorable()->getLocation() ) != aURL ) )
+    {
+        // this is definitely not a Save operation
+        // so the document info can be updated
+
+        // on export document info must be preserved
+        uno::Reference<document::XDocumentPropertiesSupplier> xDPS(
+            aModelData.GetModel(), uno::UNO_QUERY_THROW);
+        uno::Reference<util::XCloneable> xCloneable(
+            xDPS->getDocumentProperties(), uno::UNO_QUERY_THROW);
+        uno::Reference<document::XDocumentProperties> xOldDocProps(
+            xCloneable->createClone(), uno::UNO_QUERY_THROW);
+
+        // use dispatch API to show document info dialog
+        if ( aModelData.ShowDocumentInfoDialog() )
+            bDialogUsed = true;
+        else
+        {
+            OSL_FAIL( "Can't execute document info dialog!" );
+        }
+
+        try {
+            // Document properties can contain streams that should be freed before storing
+            aModelData.FreeDocumentProps();
+            if ( nStoreMode & EXPORT_REQUESTED )
+                aModelData.GetStorable()->storeToURL( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), aArgsSequence );
+            else
+                aModelData.GetStorable()->storeAsURL( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), aArgsSequence );
+        }
+        catch( const uno::Exception& )
+        {
+            if ( nStoreMode & EXPORT_REQUESTED )
+            {
+                SetDocInfoState(aModelData.GetModel(), xOldDocProps);
+            }
+            throw;
+        }
+
+        if ( nStoreMode & EXPORT_REQUESTED )
+        {
+            SetDocInfoState(aModelData.GetModel(), xOldDocProps);
+        }
+    }
+    else
+    {
+        // Document properties can contain streams that should be freed before storing
+        aModelData.FreeDocumentProps();
+
+        // this is actually a save operation with different parameters
+        // so storeTo or storeAs without DocInfo operations are used
+        if ( nStoreMode & EXPORT_REQUESTED )
+            aModelData.GetStorable()->storeToURL( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), aArgsSequence );
+        else
+            aModelData.GetStorable()->storeAsURL( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), aArgsSequence );
+    }
+
+    // Launch PDF viewer
+    if ( nStoreMode & PDFEXPORT_REQUESTED )
+    {
+        FilterConfigItem aItem(u"Office.Common/Filter/PDF/Export/");
+        bool aViewPDF = aItem.ReadBool( "ViewPDFAfterExport", false );
+
+        if ( aViewPDF )
+        {
+            uno::Reference<XSystemShellExecute> xSystemShellExecute(SystemShellExecute::create( ::comphelper::getProcessComponentContext() ) );
+            xSystemShellExecute->execute( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), "", SystemShellExecuteFlags::URIS_ONLY );
+        }
+    }
+
+    return bDialogUsed;
+}
+
+
+// static
+bool SfxStoringHelper::CheckFilterOptionsAppearance(
+                                                    const uno::Reference< container::XNameAccess >& xFilterCFG,
+                                                    const OUString& aFilterName )
+{
+    bool bUseFilterOptions = false;
+
+    DBG_ASSERT( xFilterCFG.is(), "No filter configuration!\n" );
+    if( xFilterCFG.is() )
+    {
+        try {
+            uno::Sequence < beans::PropertyValue > aProps;
+            uno::Any aAny = xFilterCFG->getByName( aFilterName );
+            if ( aAny >>= aProps )
+            {
+                ::comphelper::SequenceAsHashMap aPropsHM( aProps );
+                if( !aPropsHM.getUnpackedValueOrDefault( "UIComponent", OUString() ).isEmpty() )
+                    bUseFilterOptions = true;
+            }
+        }
+        catch( const uno::Exception& )
+        {
+        }
+    }
+
+    return bUseFilterOptions;
+}
+
+
+// static
+void SfxStoringHelper::SetDocInfoState(
+        const uno::Reference< frame::XModel >& xModel,
+        const uno::Reference< document::XDocumentProperties>& i_xOldDocProps )
+{
+    uno::Reference<document::XDocumentPropertiesSupplier> const
+        xModelDocPropsSupplier(xModel, uno::UNO_QUERY_THROW);
+    uno::Reference<document::XDocumentProperties> const xDocPropsToFill =
+        xModelDocPropsSupplier->getDocumentProperties();
+    uno::Reference< beans::XPropertySet > const xPropSet(
+            i_xOldDocProps->getUserDefinedProperties(), uno::UNO_QUERY_THROW);
+
+    uno::Reference< util::XModifiable > xModifiable( xModel, uno::UNO_QUERY );
+    if ( !xModifiable.is() )
+        throw uno::RuntimeException();
+
+    bool bIsModified = xModifiable->isModified();
+
+    try
+    {
+        uno::Reference< beans::XPropertySet > const xSet(
+                xDocPropsToFill->getUserDefinedProperties(), uno::UNO_QUERY);
+        uno::Reference< beans::XPropertyContainer > xContainer( xSet, uno::UNO_QUERY );
+        uno::Reference< beans::XPropertySetInfo > xSetInfo = xSet->getPropertySetInfo();
+        const uno::Sequence< beans::Property > lProps = xSetInfo->getProperties();
+        for (const beans::Property& rProp : lProps)
+        {
+            uno::Any aValue = xPropSet->getPropertyValue( rProp.Name );
+            if ( rProp.Attributes & css::beans::PropertyAttribute::REMOVABLE )
+            {
+                try
+                {
+                    // QUESTION: DefaultValue?!
+                    xContainer->addProperty( rProp.Name, rProp.Attributes, aValue );
+                }
+                catch (beans::PropertyExistException const&) {}
+                try
+                {
+                    // it is possible that the propertysets from XML and binary files differ; we shouldn't break then
+                    xSet->setPropertyValue( rProp.Name, aValue );
+                }
+                catch ( const uno::Exception& ) {}
+            }
+        }
+
+        // sigh... have to set these manually I'm afraid... wonder why
+        // SfxObjectShell doesn't handle this internally, should be easier
+        xDocPropsToFill->setAuthor(i_xOldDocProps->getAuthor());
+        xDocPropsToFill->setGenerator(i_xOldDocProps->getGenerator());
+        xDocPropsToFill->setCreationDate(i_xOldDocProps->getCreationDate());
+        xDocPropsToFill->setTitle(i_xOldDocProps->getTitle());
+        xDocPropsToFill->setSubject(i_xOldDocProps->getSubject());
+        xDocPropsToFill->setDescription(i_xOldDocProps->getDescription());
+        xDocPropsToFill->setKeywords(i_xOldDocProps->getKeywords());
+        xDocPropsToFill->setModifiedBy(i_xOldDocProps->getModifiedBy());
+        xDocPropsToFill->setModificationDate(i_xOldDocProps->getModificationDate());
+        xDocPropsToFill->setPrintedBy(i_xOldDocProps->getPrintedBy());
+        xDocPropsToFill->setPrintDate(i_xOldDocProps->getPrintDate());
+        xDocPropsToFill->setAutoloadURL(i_xOldDocProps->getAutoloadURL());
+        xDocPropsToFill->setAutoloadSecs(i_xOldDocProps->getAutoloadSecs());
+        xDocPropsToFill->setDefaultTarget(i_xOldDocProps->getDefaultTarget());
+        xDocPropsToFill->setEditingCycles(i_xOldDocProps->getEditingCycles());
+        xDocPropsToFill->setEditingDuration(i_xOldDocProps->getEditingDuration());
+        // other attributes e.g. DocumentStatistics are not editable from dialog
+    }
+    catch (const uno::Exception&)
+    {
+        TOOLS_INFO_EXCEPTION("sfx.doc", "SetDocInfoState");
+    }
+
+    // set the modified flag back if required
+    if ( bIsModified != bool(xModifiable->isModified()) )
+        xModifiable->setModified( bIsModified );
+}
+
+
+// static
+bool SfxStoringHelper::WarnUnacceptableFormat( const uno::Reference< frame::XModel >& xModel,
+                                                    std::u16string_view aOldUIName,
+                                                    const OUString& aDefExtension,
+                                                    bool bDefIsAlien )
+{
+    if ( !officecfg::Office::Common::Save::Document::WarnAlienFormat::get() )
+        return true;
+
+    weld::Window* pWin = SfxStoringHelper::GetModelWindow(xModel);
+    SfxAlienWarningDialog aDlg(pWin, aOldUIName, aDefExtension, bDefIsAlien);
+
+    return aDlg.run() == RET_OK;
+}
+
+uno::Reference<awt::XWindow> SfxStoringHelper::GetModelXWindow(const uno::Reference<frame::XModel>& xModel)
+{
+    try {
+        if ( xModel.is() )
+        {
+            uno::Reference< frame::XController > xController = xModel->getCurrentController();
+            if ( xController.is() )
+            {
+                uno::Reference< frame::XFrame > xFrame = xController->getFrame();
+                if ( xFrame.is() )
+                {
+                    return xFrame->getContainerWindow();
+                }
+            }
+        }
+    }
+    catch ( const uno::Exception& )
+    {
+    }
+
+    return uno::Reference<awt::XWindow>();
+}
+
+weld::Window* SfxStoringHelper::GetModelWindow( const uno::Reference< frame::XModel >& xModel )
+{
+    weld::Window* pWin = nullptr;
+
+    try
+    {
+        pWin = Application::GetFrameWeld(GetModelXWindow(xModel));
+    }
+    catch (const uno::Exception&)
+    {
+    }
+
+    return pWin;
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */