Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 456 insertions, 0 deletions

diff --git a/solenv/gbuild/Configuration.mk b/solenv/gbuild/Configuration.mk
new file mode 100644
index 000000000..5459b9132
--- /dev/null
+++ b/solenv/gbuild/Configuration.mk
@@ -0,0 +1,456 @@
+# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+#   Licensed to the Apache Software Foundation (ASF) under one or more
+#   contributor license agreements. See the NOTICE file distributed
+#   with this work for additional information regarding copyright
+#   ownership. The ASF licenses this file to you under the Apache
+#   License, Version 2.0 (the "License"); you may not use this file
+#   except in compliance with the License. You may obtain a copy of
+#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+# Configuration files: a bit of an overview of the targets:
+#
+# Configuration
+# => XcsTarget: schemas
+# 	 => buildtools
+#	 => Xcs source
+# => XcuDataTarget: data
+# 	 => buildtools
+#    => XcsTarget (schema)
+#	 => Xcu data source
+# => XcuModuleTaret: modules
+# 	 => buildtools
+#	 => Xcu data source
+# => XcuLangpackTarget: langpack (per lang)
+# 	 => buildtools
+#	 => Xcu data source
+# => XcuResTarget: resources (per lang)
+#    => buildtools
+#    => XcuMergeTarget: merge
+#       => buildtools (cfgex)
+#       => Xcu data source
+#       => *.po
+#    => XcsTarget (schema)
+
+# The main LibreOffice registry (cf. officecfg/Configuration_officecfg.mk):
+gb_Configuration_PRIMARY_REGISTRY_NAME := registry
+gb_Configuration_PRIMARY_REGISTRY_SCHEMA_ROOT = \
+    $(SRCDIR)/officecfg/registry/schema
+
+gb_Configuration__stringparam_schemaRoot = --stringparam schemaRoot \
+    $(if $(PRIMARY_REGISTRY), \
+        $(gb_Configuration_PRIMARY_REGISTRY_SCHEMA_ROOT), \
+        $(call gb_XcsTarget_get_target,))
+
+gb_Configuration_XSLTCOMMAND = $(call gb_ExternalExecutable_get_command,xsltproc)
+gb_Configuration_XSLTCOMMAND_DEPS = $(call gb_ExternalExecutable_get_dependencies,xsltproc)
+
+# XcsTarget class
+
+# need to locate a schema file corresponding to some XCU file in the outdir
+define gb_XcsTarget_for_XcuTarget
+$(call gb_XcsTarget_get_target,$(basename $(1)).xcs)
+endef
+
+gb_Configuration_LANGS := en-US $(filter-out en-US,$(gb_WITH_LANG))
+
+gb_XcsTarget_XSLT_SchemaVal := $(SRCDIR)/officecfg/util/schema_val.xsl
+gb_XcsTarget_XSLT_Sanity := $(SRCDIR)/officecfg/util/sanity.xsl
+gb_XcsTarget_XSLT_SchemaTrim := $(SRCDIR)/officecfg/util/schema_trim.xsl
+gb_XcsTarget_DTD_Schema := $(SRCDIR)/officecfg/registry/component-schema.dtd
+
+define gb_XcsTarget__command
+$(call gb_Helper_abbreviate_dirs,\
+	mkdir -p $(dir $(1)) && \
+	$(gb_Configuration_XSLTCOMMAND) --nonet \
+		--noout \
+		--stringparam componentName $(subst /,.,$(basename $(2))) \
+		--stringparam root $(subst $(2),,$(3)) \
+		$(gb_Configuration__stringparam_schemaRoot) \
+		$(gb_XcsTarget_XSLT_SchemaVal) \
+		$(3) && \
+	$(gb_Configuration_XSLTCOMMAND) --nonet \
+		--noout \
+		$(gb_XcsTarget_XSLT_Sanity) \
+		$(3) && \
+	$(gb_Configuration_XSLTCOMMAND) --nonet \
+		-o $(1) \
+		--stringparam LIBO_SHARE_FOLDER $(LIBO_SHARE_FOLDER) \
+		--stringparam LIBO_SHARE_HELP_FOLDER $(LIBO_SHARE_HELP_FOLDER) \
+		$(gb_XcsTarget_XSLT_SchemaTrim) \
+		$(3))
+endef
+
+$(call gb_XcsTarget_get_target,%) : \
+	    $(gb_XcsTarget_XSLT_SchemaVal) $(gb_XcsTarget_XSLT_Sanity) \
+		$(gb_XcsTarget_XSLT_SchemaTrim) $(gb_XcsTarget_DTD_Schema) \
+		| $(gb_Configuration_XSLTCOMMAND_DEPS)
+	$(call gb_Output_announce,$*,$(true),XCS,1)
+	$(call gb_Trace_StartRange,$*,XCS)
+	$(call gb_XcsTarget__command,$@,$*,$(filter %.xcs,$^))
+	$(call gb_Trace_EndRange,$*,XCS)
+
+$(call gb_XcsTarget_get_clean_target,%) :
+	$(call gb_Output_announce,$*,$(false),XCS,1)
+	rm -f $(call gb_XcsTarget_get_target,$*)
+
+
+# XcuDataTarget class
+
+gb_XcuTarget_XSLT_AllLang := $(SRCDIR)/officecfg/util/alllang.xsl
+gb_XcuDataTarget_XSLT_DataVal := $(SRCDIR)/officecfg/util/data_val.xsl
+gb_XcuDataTarget_DTD_ComponentUpdate := $(SRCDIR)/officecfg/registry/component-update.dtd
+
+define gb_XcuDataTarget__command
+$(call gb_Helper_abbreviate_dirs,\
+	mkdir -p $(dir $(1)) && \
+	$(gb_Configuration_XSLTCOMMAND) --nonet \
+		--noout \
+		--stringparam xcs $(call gb_XcsTarget_for_XcuTarget,$(XCUFILE)) \
+		$(gb_Configuration__stringparam_schemaRoot) \
+		--path $(SRCDIR)/officecfg/registry \
+		$(gb_XcuDataTarget_XSLT_DataVal) \
+		$(3) && \
+	$(gb_Configuration_XSLTCOMMAND) --nonet \
+		-o $(1) \
+		--stringparam xcs $(call gb_XcsTarget_for_XcuTarget,$(XCUFILE)) \
+		$(gb_Configuration__stringparam_schemaRoot) \
+		--stringparam LIBO_SHARE_FOLDER $(LIBO_SHARE_FOLDER) \
+		--stringparam LIBO_SHARE_HELP_FOLDER $(LIBO_SHARE_HELP_FOLDER) \
+		--path $(SRCDIR)/officecfg/registry \
+		$(gb_XcuTarget_XSLT_AllLang) \
+		$(3))
+endef
+
+$(call gb_XcuDataTarget_get_target,%) : $(gb_XcuDataTarget_XSLT_DataVal) \
+		$(gb_XcuTarget_XSLT_AllLang) $(gb_XcuDataTarget_DTD_ComponentUpdate) \
+		| $(gb_Configuration_XSLTCOMMAND_DEPS)
+	$(call gb_Output_announce,$*,$(true),XCU,2)
+	$(call gb_Trace_StartRange,$*,XCU)
+	$(call gb_XcuDataTarget__command,$@,$*,$(filter %.xcu,$^))
+	$(call gb_Trace_EndRange,$*,XCU)
+
+$(call gb_XcuDataTarget_get_clean_target,%) :
+	$(call gb_Output_announce,$*,$(false),XCU,2)
+	$(call gb_Helper_abbreviate_dirs,\
+		rm -f $(call gb_XcuDataTarget_get_target,$*))
+
+
+# XcuModuleTarget class
+
+define gb_XcuDataSource_for_XcuModuleTarget
+$(SRCDIR)/$(basename $(subst -,.,$(basename $(1)))).xcu
+endef
+
+define gb_XcsTarget_for_XcuModuleTarget
+$(call gb_XcsTarget_get_target,$(basename $(subst -,.,$(basename $(1)))).xcs)
+endef
+
+define gb_XcuModuleTarget__command
+$(call gb_Helper_abbreviate_dirs,\
+	mkdir -p $(dir $(1)) && \
+	$(gb_Configuration_XSLTCOMMAND) --nonet \
+		-o $(1) \
+		--stringparam xcs $(4) \
+		$(gb_Configuration__stringparam_schemaRoot) \
+		--stringparam module $(notdir $(subst -,/,$(basename $(notdir $(2))))) \
+		--stringparam LIBO_SHARE_FOLDER $(LIBO_SHARE_FOLDER) \
+		--stringparam LIBO_SHARE_HELP_FOLDER $(LIBO_SHARE_HELP_FOLDER) \
+		$(gb_XcuTarget_XSLT_AllLang) \
+		$(3))
+endef
+
+$(call gb_XcuModuleTarget_get_target,%) : $(gb_XcuTarget_XSLT_AllLang) \
+		| $(gb_Configuration_XSLTCOMMAND_DEPS)
+	$(if $(filter %.xcu,$^),,$(error There is no target $(call gb_XcuModuleTarget_get_target,$*)))
+	$(call gb_Output_announce,$*,$(true),XCM,3)
+	$(call gb_Trace_StartRange,$*,XCM)
+	$(call gb_XcuModuleTarget__command,$@,$*,$(filter %.xcu,$^),$(filter %.xcs,$^))
+	$(call gb_Trace_EndRange,$*,XCM)
+
+$(call gb_XcuModuleTarget_get_clean_target,%) :
+	$(call gb_Output_announce,$*,$(false),XCM,3)
+	$(call gb_Helper_abbreviate_dirs,\
+		rm -f $(call gb_XcuModuleTarget_get_target,$*))
+
+
+# XcuLangpackTarget class
+
+gb_XcuLangpackTarget__get_name_with_lang = $(basename $(1))-$(2)$(suffix $(1))
+
+gb_XcuLangpackTarget__get_target_with_lang = \
+ $(call gb_XcuLangpackTarget_get_target,$(call gb_XcuLangpackTarget__get_name_with_lang,$(1),$(2)))
+
+gb_XcuLangpackTarget_SED_delcomment := $(SRCDIR)/officecfg/util/delcomment.sed
+
+define gb_XcuLangpackTarget__command
+$(call gb_Helper_abbreviate_dirs,\
+	mkdir -p $(dir $(1)) && \
+	sed -e "s/__LANGUAGE__/$(LANGUAGE)/" -f $(gb_XcuLangpackTarget_SED_delcomment)\
+	    $(3) > $(1))
+endef
+
+$(call gb_XcuLangpackTarget_get_target,%) : \
+		$(gb_XcuLangpackTarget_SED_delcomment)
+	$(call gb_Output_announce,$*,$(true),XCL,1)
+	$(call gb_Trace_StartRange,$*,XCL)
+	$(call gb_XcuLangpackTarget__command,$@,$*,$(filter %.tmpl,$^))
+	$(call gb_Trace_EndRange,$*,XCL)
+
+$(call gb_XcuLangpackTarget_get_clean_target,%) :
+	$(call gb_Output_announce,$*,$(false),XCL,1)
+	$(call gb_Helper_abbreviate_dirs,\
+		rm -f $(foreach lang,$(gb_Configuration_LANGS),\
+			  $(call gb_XcuLangpackTarget__get_target_with_lang,$*,$(lang))))
+
+
+# XcuMergeTarget class
+
+gb_XcuMergeTarget_CFGEXDEPS := $(call gb_Executable_get_runtime_dependencies,cfgex)
+gb_XcuMergeTarget_CFGEXCOMMAND := $(call gb_Executable_get_command,cfgex)
+
+define gb_XcuMergeTarget__command
+MERGEINPUT=$(call gb_var2file,$(shell $(gb_MKTEMP)),100,$(POFILES)) && \
+$(call gb_Helper_abbreviate_dirs,\
+	mkdir -p $(dir $(1)) && \
+	$(gb_XcuMergeTarget_CFGEXCOMMAND) \
+		-i $(3) \
+		-o $(1) \
+		-m $${MERGEINPUT} \
+		-l all) && \
+rm -rf $${MERGEINPUT}
+
+endef
+
+$(call gb_XcuMergeTarget_get_target,%) : $(gb_XcuMergeTarget_CFGEXDEPS)
+	$(if $(filter $(words $(POFILES)),$(words $(wildcard $(POFILES)))),\
+		$(call gb_Output_announce,$*,$(true),XCX,1) \
+		$(call gb_Trace_StartRange,$*,XCX) \
+		$(call gb_XcuMergeTarget__command,$@,$*,$(filter %.xcu,$^)),\
+		$(call gb_Trace_EndRange,$*,XCX) \
+		mkdir -p $(dir $@) && cp $(filter %.xcu,$^) $@)
+
+$(call gb_XcuMergeTarget_get_clean_target,%) :
+	$(call gb_Output_announce,$*,$(false),XCX,1)
+	$(call gb_Helper_abbreviate_dirs,\
+		rm -f $(call gb_XcuMergeTarget_get_target,$*))
+
+# $(call gb_XcuMergeTarget_XcuMergeTarget,target,configuration,prefix,xcufile)
+define gb_XcuMergeTarget_XcuMergeTarget
+$(call gb_XcuMergeTarget_get_target,$(1)) : \
+	$(SRCDIR)/$(3)/$(4) \
+	$(wildcard $(foreach lang,$(gb_TRANS_LANGS),$(gb_POLOCATION)/$(lang)/$(patsubst %/,%,$(dir $(1))).po))
+$(call gb_XcuMergeTarget_get_target,$(1)) : \
+	POFILES := $(foreach lang,$(gb_TRANS_LANGS),$(gb_POLOCATION)/$(lang)/$(patsubst %/,%,$(dir $(1))).po)
+$(foreach lang,$(gb_TRANS_LANGS),$(gb_POLOCATION)/$(lang)/$(patsubst %/,%,$(dir $(1))).po) :
+endef
+
+
+# XcuResTarget class
+
+# locale is extracted from the stem (parameter $(2))
+define gb_XcuResTarget__command
+$(call gb_Helper_abbreviate_dirs,\
+	mkdir -p $(dir $(1)) && \
+	$(gb_Configuration_XSLTCOMMAND) --nonet \
+		-o $(1) \
+		--stringparam xcs $(call gb_XcsTarget_for_XcuTarget,$(XCUFILE)) \
+		$(gb_Configuration__stringparam_schemaRoot) \
+		--stringparam locale $(word 2,$(subst /, ,$(2))) \
+		--stringparam LIBO_SHARE_FOLDER $(LIBO_SHARE_FOLDER) \
+		--stringparam LIBO_SHARE_HELP_FOLDER $(LIBO_SHARE_HELP_FOLDER) \
+		--path $(SRCDIR)/officecfg/registry \
+		$(gb_XcuTarget_XSLT_AllLang) \
+		$(3))
+endef
+
+$(call gb_XcuResTarget_get_target,%) : $(gb_XcuTarget_XSLT_AllLang) \
+		| $(gb_Configuration_XSLTCOMMAND_DEPS)
+	$(call gb_Output_announce,$*,$(true),XCR,2)
+	$(call gb_Trace_StartRange,$*,XCR)
+	$(call gb_XcuResTarget__command,$@,$*,$(filter %.xcu,$^))
+	$(call gb_Trace_EndRange,$*,XCR)
+
+$(call gb_XcuResTarget_get_clean_target,%) :
+	$(call gb_Output_announce,$*,$(false),XCR,2)
+	$(call gb_Helper_abbreviate_dirs,\
+		rm -f $(call gb_XcuResTarget_get_target,$*))
+
+# $(call gb_XcuResTarget_XcuResTarget,target,configuration,prefix,xcufile,lang)
+# this depends either on the source or on the merge target (if WITH_LANG)
+define gb_XcuResTarget_XcuResTarget
+ifeq ($(strip $(gb_WITH_LANG)),)
+$(call gb_XcuResTarget_get_target,$(1)) : $(SRCDIR)/$(3)/$(4)
+else
+$(call gb_XcuResTarget_get_target,$(1)) : \
+	$(call gb_XcuMergeTarget_get_target,$(3)/$(4))
+endif
+$(call gb_XcuResTarget_get_target,$(1)) : \
+	$(call gb_XcsTarget_for_XcuTarget,$(4))
+$(call gb_XcuResTarget_get_target,$(1)) : PRIMARY_REGISTRY := $(filter $(2),$(gb_Configuration_PRIMARY_REGISTRY_NAME))
+$(call gb_XcuResTarget_get_target,$(1)) : XCUFILE := $(4)
+endef
+
+
+# Configuration class
+
+$(call gb_Configuration_get_clean_target,%) :
+	$(call gb_Output_announce,$*,$(false),CFG,4)
+	$(call gb_Helper_abbreviate_dirs,\
+		rm -f $(call gb_Configuration_get_target,$*) $(call gb_Configuration_get_preparation_target,$*))
+
+$(call gb_Configuration_get_target,%) :
+	$(call gb_Output_announce,$*,$(true),CFG,4)
+	$(call gb_Trace_MakeMark,$*,CFG)
+	$(call gb_Helper_abbreviate_dirs,\
+		mkdir -p $(dir $@) && touch $@)
+
+$(call gb_Configuration_get_preparation_target,%) :
+	$(call gb_Helper_abbreviate_dirs,\
+		mkdir -p $(dir $@) && touch $@)
+
+# $(call gb_Configuration_Configuration,configuration,nodeliver)
+# last parameter may be used to turn off delivering of files
+# FIXME: not anymore, no files are delivered now
+define gb_Configuration_Configuration
+$(eval gb_Configuration_NODELIVER_$(1) := $(2))
+
+$$(eval $$(call gb_Module_register_target,$(call gb_Configuration_get_target,$(1)),$(call gb_Configuration_get_clean_target,$(1))))
+$(call gb_Helper_make_userfriendly_targets,$(1),Configuration)
+
+endef
+
+# $(call gb_Configuration_add_schema,configuration,prefix,xcsfile)
+# hopefully extensions do not need to add schemas with same name as officecfg
+define gb_Configuration_add_schema
+$(call gb_Configuration_get_clean_target,$(1)) : \
+	$(call gb_XcsTarget_get_clean_target,$(3))
+$(call gb_XcsTarget_get_target,$(3)) : \
+	$(SRCDIR)/$(2)/$(3) \
+	$(call gb_Configuration_get_preparation_target,$(1))
+$(call gb_XcsTarget_get_target,$(3)) : PRIMARY_REGISTRY := $(filter $(1),$(gb_Configuration_PRIMARY_REGISTRY_NAME))
+$(call gb_Configuration_get_target,$(1)) : \
+	$(call gb_XcsTarget_get_target,$(3))
+
+endef
+
+#$(call gb_Configuration_add_schemas,configuration,prefix,xcsfiles)
+define gb_Configuration_add_schemas
+$(foreach xcs,$(3),$(call gb_Configuration_add_schema,$(1),$(2),$(xcs)))
+
+endef
+
+# $(call gb_Configuration_add_data,configuration,prefix,xcufile)
+define gb_Configuration_add_data
+$(call gb_Configuration_get_clean_target,$(1)) : \
+	$(call gb_XcuDataTarget_get_clean_target,$(2)/$(3))
+$(call gb_XcuDataTarget_get_target,$(2)/$(3)) : \
+	$(SRCDIR)/$(2)/$(3) \
+	$(call gb_Configuration_get_preparation_target,$(1)) \
+	$(call gb_XcsTarget_for_XcuTarget,$(3))
+$(call gb_XcuDataTarget_get_target,$(2)/$(3)) : PRIMARY_REGISTRY := $(filter $(1),$(gb_Configuration_PRIMARY_REGISTRY_NAME))
+$(call gb_XcuDataTarget_get_target,$(2)/$(3)) : XCUFILE := $(3)
+$(call gb_Configuration_get_target,$(1)) : \
+	$(call gb_XcuDataTarget_get_target,$(2)/$(3))
+
+endef
+
+#$(call gb_Configuration_add_datas,configuration,prefix,xcufiles)
+define gb_Configuration_add_datas
+$(foreach xcu,$(3),$(call gb_Configuration_add_data,$(1),$(2),$(xcu)))
+
+endef
+
+# $(call gb_Configuration_add_spool_module,configuration,prefix,xcufile)
+define gb_Configuration_add_spool_module
+$(call gb_Configuration_get_clean_target,$(1)) : \
+	$(call gb_XcuModuleTarget_get_clean_target,$(2)/$(3))
+$(call gb_XcuModuleTarget_get_target,$(2)/$(3)) : \
+	$(call gb_XcuDataSource_for_XcuModuleTarget,$(2)/$(3)) \
+	$(call gb_Configuration_get_preparation_target,$(1)) \
+	$(call gb_XcsTarget_for_XcuModuleTarget,$(3))
+$(call gb_XcuModuleTarget_get_target,$(2)/$(3)) : PRIMARY_REGISTRY := $(filter $(1),$(gb_Configuration_PRIMARY_REGISTRY_NAME))
+$(call gb_Configuration_get_target,$(1)) : \
+	$(call gb_XcuModuleTarget_get_target,$(2)/$(3))
+
+endef
+
+# $(call gb_Configuration_add_spool_modules,configuration,prefix,xcufiles)
+define gb_Configuration_add_spool_modules
+$(foreach xcu,$(3),$(call gb_Configuration_add_spool_module,$(1),$(2),$(xcu)))
+
+endef
+
+define gb_Configuration__add_langpack
+$(if $(gb_Configuration_NODELIVER_$(1)),\
+	$(error TODO not needed yet: cannot add langpack if nodeliver))
+$(call gb_Configuration_get_target,$(1)) : \
+	$(call gb_XcuLangpackTarget__get_target_with_lang,$(3),$(4))
+$(call gb_XcuLangpackTarget__get_target_with_lang,$(3),$(4)) : \
+	$(SRCDIR)/$(2)/$(3).tmpl
+$(call gb_XcuLangpackTarget__get_target_with_lang,$(3),$(4)) : LANGUAGE := $(4)
+
+endef
+
+# $(call gb_Configuration_add_spool_langpack,configuration,prefix,xcufile)
+define gb_Configuration_add_spool_langpack
+$(foreach lang,$(gb_Configuration_LANGS),$(eval \
+	$(call gb_Configuration__add_langpack,$(1),$(2),$(strip $(3)),$(lang))))
+$(call gb_Configuration_get_clean_target,$(1)) : \
+	$(call gb_XcuLangpackTarget_get_clean_target,$(strip $(3)))
+
+endef
+
+# $(call gb_Configuration_add_localized_data,configuration,prefix,xcufile)
+define gb_Configuration_add_localized_data
+$(eval $(call gb_Configuration_add_data,$(1),$(2),$(3)))
+ifneq ($(strip $(gb_WITH_LANG)),)
+$(eval $(call gb_XcuMergeTarget_XcuMergeTarget,$(2)/$(3),$(1),$(2),$(3)))
+$(eval $(call gb_Configuration_get_clean_target,$(1)) : \
+	$(call gb_XcuMergeTarget_get_clean_target,$(2)/$(3)))
+endif
+$(foreach lang,$(gb_Configuration_LANGS),$(eval \
+ $(call gb_XcuResTarget_XcuResTarget,$(1)/$(lang)/$(3),$(1),$(2),$(3),$(lang))))
+$(foreach lang,$(gb_Configuration_LANGS),$(eval \
+  $(call gb_Configuration_get_target,$(1)) : \
+	$(call gb_XcuResTarget_get_target,$(1)/$(lang)/$(3))))
+$(foreach lang,$(gb_Configuration_LANGS),$(eval \
+  $(call gb_Configuration_get_clean_target,$(1)) : \
+	$(call gb_XcuResTarget_get_clean_target,$(1)/$(lang)/$(3))))
+
+endef
+
+# $(call gb_Configuration_add_localized_datas,configuration,prefix,xcufile)
+define gb_Configuration_add_localized_datas
+$(foreach xcu,$(3),$(call gb_Configuration_add_localized_data,$(1),$(2),$(xcu)))
+
+endef
+
+# Set extra registry this configuration can use schemas from.
+#
+# Example:
+# # foo needs schemas from the main configuration
+# $(eval $(call gb_Configuration_use_configuration,foo,registry))
+define gb_Configuration_use_configuration
+$(call gb_Configuration_get_preparation_target,$(1)) : $(call gb_Configuration_get_target,$(2))
+
+endef
+
+# apparently extensions package the XcuMergeTarget directly...
+# trivial convenience function to get the right file:
+ifeq ($(gb_WITH_LANG),)
+gb_XcuFile_for_extension = $(SRCDIR)/$(1)
+else
+gb_XcuFile_for_extension = $(call gb_XcuMergeTarget_get_target,$(1))
+endif
+
+# vim: set noet sw=4 ts=4: