Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 1272 insertions, 0 deletions

diff --git a/svx/source/sidebar/possize/PosSizePropertyPanel.cxx b/svx/source/sidebar/possize/PosSizePropertyPanel.cxx
new file mode 100644
index 000000000..da9e067b2
--- /dev/null
+++ b/svx/source/sidebar/possize/PosSizePropertyPanel.cxx
@@ -0,0 +1,1079 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/config.h>
+
+#include <algorithm>
+
+#include "PosSizePropertyPanel.hxx"
+#include <sal/log.hxx>
+#include <svx/svxids.hrc>
+#include <sfx2/dispatch.hxx>
+#include <sfx2/bindings.hxx>
+#include <sfx2/module.hxx>
+#include <sfx2/viewsh.hxx>
+#include <sfx2/objsh.hxx>
+#include <sfx2/viewfrm.hxx>
+#include <sfx2/weldutils.hxx>
+#include <svx/dialcontrol.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/rectenum.hxx>
+#include <svx/sdangitm.hxx>
+#include <unotools/viewoptions.hxx>
+#include <unotools/localedatawrapper.hxx>
+#include <vcl/canvastools.hxx>
+#include <vcl/fieldvalues.hxx>
+#include <svl/intitem.hxx>
+#include <svx/strings.hrc>
+#include <svx/svdpagv.hxx>
+#include <svx/svdview.hxx>
+#include <svx/transfrmhelper.hxx>
+#include <boost/property_tree/ptree.hpp>
+
+#include <svtools/unitconv.hxx>
+
+using namespace css;
+using namespace css::uno;
+
+constexpr OUStringLiteral USERITEM_NAME = u"FitItem";
+
+namespace svx::sidebar {
+
+PosSizePropertyPanel::PosSizePropertyPanel(
+    weld::Widget* pParent,
+    const css::uno::Reference<css::frame::XFrame>& rxFrame,
+    SfxBindings* pBindings,
+    const css::uno::Reference<css::ui::XSidebar>& rxSidebar)
+:   PanelLayout(pParent, "PosSizePropertyPanel", "svx/ui/sidebarpossize.ui"),
+    mxFtPosX(m_xBuilder->weld_label("horizontallabel")),
+    mxMtrPosX(m_xBuilder->weld_metric_spin_button("horizontalpos", FieldUnit::CM)),
+    mxFtPosY(m_xBuilder->weld_label("verticallabel")),
+    mxMtrPosY(m_xBuilder->weld_metric_spin_button("verticalpos", FieldUnit::CM)),
+    mxFtWidth(m_xBuilder->weld_label("widthlabel")),
+    mxMtrWidth(m_xBuilder->weld_metric_spin_button("selectwidth", FieldUnit::CM)),
+    mxFtHeight(m_xBuilder->weld_label("heightlabel")),
+    mxMtrHeight(m_xBuilder->weld_metric_spin_button("selectheight", FieldUnit::CM)),
+    mxCbxScale(m_xBuilder->weld_check_button("ratio")),
+    mxFtAngle(m_xBuilder->weld_label("rotationlabel")),
+    mxMtrAngle(m_xBuilder->weld_metric_spin_button("rotation", FieldUnit::DEGREE)),
+    mxCtrlDial(new DialControl),
+    mxDial(new weld::CustomWeld(*m_xBuilder, "orientationcontrol", *mxCtrlDial)),
+    mxFtFlip(m_xBuilder->weld_label("fliplabel")),
+    mxFlipTbx(m_xBuilder->weld_toolbar("selectrotationtype")),
+    mxFlipDispatch(new ToolbarUnoDispatcher(*mxFlipTbx, *m_xBuilder, rxFrame)),
+    mxArrangeTbx(m_xBuilder->weld_toolbar("arrangetoolbar")),
+    mxArrangeDispatch(new ToolbarUnoDispatcher(*mxArrangeTbx, *m_xBuilder, rxFrame)),
+    mxArrangeTbx2(m_xBuilder->weld_toolbar("arrangetoolbar2")),
+    mxArrangeDispatch2(new ToolbarUnoDispatcher(*mxArrangeTbx2, *m_xBuilder, rxFrame)),
+    mxAlignTbx(m_xBuilder->weld_toolbar("aligntoolbar")),
+    mxAlignDispatch(new ToolbarUnoDispatcher(*mxAlignTbx, *m_xBuilder, rxFrame)),
+    mxAlignTbx2(m_xBuilder->weld_toolbar("aligntoolbar2")),
+    mxAlignDispatch2(new ToolbarUnoDispatcher(*mxAlignTbx2, *m_xBuilder, rxFrame)),
+    mxBtnEditOLEObject(m_xBuilder->weld_button("btnEditObject")),
+    mpView(nullptr),
+    mlOldWidth(1),
+    mlOldHeight(1),
+    mlRotX(0),
+    mlRotY(0),
+    mePoolUnit(),
+    meDlgUnit(FieldUnit::INCH), // #i124409# init with fallback default
+    maTransfPosXControl(SID_ATTR_TRANSFORM_POS_X, *pBindings, *this),
+    maTransfPosYControl(SID_ATTR_TRANSFORM_POS_Y, *pBindings, *this),
+    maTransfWidthControl(SID_ATTR_TRANSFORM_WIDTH, *pBindings, *this),
+    maTransfHeightControl(SID_ATTR_TRANSFORM_HEIGHT, *pBindings, *this),
+    maSvxAngleControl( SID_ATTR_TRANSFORM_ANGLE, *pBindings, *this),
+    maRotXControl(SID_ATTR_TRANSFORM_ROT_X, *pBindings, *this),
+    maRotYControl(SID_ATTR_TRANSFORM_ROT_Y, *pBindings, *this),
+    maProPosControl(SID_ATTR_TRANSFORM_PROTECT_POS, *pBindings, *this),
+    maProSizeControl(SID_ATTR_TRANSFORM_PROTECT_SIZE, *pBindings, *this),
+    maAutoWidthControl(SID_ATTR_TRANSFORM_AUTOWIDTH, *pBindings, *this),
+    maAutoHeightControl(SID_ATTR_TRANSFORM_AUTOHEIGHT, *pBindings, *this),
+    m_aMetricCtl(SID_ATTR_METRIC, *pBindings, *this),
+    mpBindings(pBindings),
+    mbSizeProtected(false),
+    mbPositionProtected(false),
+    mbAutoWidth(false),
+    mbAutoHeight(false),
+    mbAdjustEnabled(false),
+    mxSidebar(rxSidebar)
+{
+    Initialize();
+
+    // A guesstimate of the longest label in the various sidebar panes to use
+    // to get this pane's contents to align with them, for lack of a better
+    // solution
+    auto nWidth = mxFtWidth->get_preferred_size().Width();
+    OUString sLabel = mxFtWidth->get_label();
+    mxFtWidth->set_label(SvxResId(RID_SVXSTR_TRANSPARENCY));
+    nWidth = std::max(nWidth, mxFtWidth->get_preferred_size().Width());;
+    mxFtWidth->set_label(sLabel);
+    mxFtWidth->set_size_request(nWidth, -1);
+
+    mpBindings->Update( SID_ATTR_METRIC );
+    mpBindings->Update( SID_ATTR_TRANSFORM_WIDTH );
+    mpBindings->Update( SID_ATTR_TRANSFORM_HEIGHT );
+    mpBindings->Update( SID_ATTR_TRANSFORM_PROTECT_SIZE );
+}
+
+PosSizePropertyPanel::~PosSizePropertyPanel()
+{
+    mxFtPosX.reset();
+    mxMtrPosX.reset();
+    mxFtPosY.reset();
+    mxMtrPosY.reset();
+    mxFtWidth.reset();
+    mxMtrWidth.reset();
+    mxFtHeight.reset();
+    mxMtrHeight.reset();
+    mxCbxScale.reset();
+    mxFtAngle.reset();
+    mxMtrAngle.reset();
+    mxDial.reset();
+    mxCtrlDial.reset();
+    mxFtFlip.reset();
+    mxFlipDispatch.reset();
+    mxFlipTbx.reset();
+    mxAlignDispatch.reset();
+    mxAlignDispatch2.reset();
+    mxAlignTbx.reset();
+    mxAlignTbx2.reset();
+    mxArrangeDispatch.reset();
+    mxArrangeDispatch2.reset();
+    mxArrangeTbx.reset();
+    mxArrangeTbx2.reset();
+    mxBtnEditOLEObject.reset();
+
+    maTransfPosXControl.dispose();
+    maTransfPosYControl.dispose();
+    maTransfWidthControl.dispose();
+    maTransfHeightControl.dispose();
+
+    maSvxAngleControl.dispose();
+    maRotXControl.dispose();
+    maRotYControl.dispose();
+    maProPosControl.dispose();
+    maProSizeControl.dispose();
+    maAutoWidthControl.dispose();
+    maAutoHeightControl.dispose();
+    m_aMetricCtl.dispose();
+}
+
+namespace
+{
+    bool hasText(const SdrView& rSdrView)
+    {
+        const SdrMarkList& rMarkList = rSdrView.GetMarkedObjectList();
+
+        if(1 == rMarkList.GetMarkCount())
+        {
+            const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
+            const SdrObjKind eKind(pObj->GetObjIdentifier());
+
+            if((pObj->GetObjInventor() == SdrInventor::Default) && (SdrObjKind::Text == eKind || SdrObjKind::TitleText == eKind || SdrObjKind::OutlineText == eKind))
+            {
+                const SdrTextObj* pSdrTextObj = dynamic_cast< const SdrTextObj* >(pObj);
+
+                if(pSdrTextObj && pSdrTextObj->HasText())
+                {
+                    return true;
+                }
+            }
+        }
+
+        return false;
+    }
+} // end of anonymous namespace
+
+
+void PosSizePropertyPanel::Initialize()
+{
+    //Position : Horizontal / Vertical
+    mxMtrPosX->connect_value_changed( LINK( this, PosSizePropertyPanel, ChangePosXHdl ) );
+    mxMtrPosY->connect_value_changed( LINK( this, PosSizePropertyPanel, ChangePosYHdl ) );
+
+    //Size : Width / Height
+    mxMtrWidth->connect_value_changed( LINK( this, PosSizePropertyPanel, ChangeWidthHdl ) );
+    mxMtrHeight->connect_value_changed( LINK( this, PosSizePropertyPanel, ChangeHeightHdl ) );
+
+    //Size : Keep ratio
+    mxCbxScale->connect_toggled( LINK( this, PosSizePropertyPanel, ClickAutoHdl ) );
+
+    //rotation control
+    mxCtrlDial->SetLinkedField(mxMtrAngle.get(), 2);
+    mxCtrlDial->SetModifyHdl(LINK( this, PosSizePropertyPanel, RotationHdl));
+
+    //use same logic as DialControl_Impl::SetSize
+    weld::DrawingArea* pDrawingArea = mxCtrlDial->GetDrawingArea();
+    int nDim = (std::min<int>(pDrawingArea->get_approximate_digit_width() * 6,
+                              pDrawingArea->get_text_height() * 3) - 1) | 1;
+    Size aSize(nDim, nDim);
+    pDrawingArea->set_size_request(aSize.Width(), aSize.Height());
+    mxCtrlDial->Init(aSize);
+
+    mxBtnEditOLEObject->connect_clicked( LINK( this, PosSizePropertyPanel, ClickObjectEditHdl ) );
+
+    SfxViewShell* pCurSh = SfxViewShell::Current();
+    if ( pCurSh )
+        mpView = pCurSh->GetDrawView();
+    else
+        mpView = nullptr;
+
+    if ( mpView != nullptr )
+    {
+        maUIScale = mpView->GetModel()->GetUIScale();
+        mbAdjustEnabled = hasText(*mpView);
+    }
+
+    mePoolUnit = maTransfWidthControl.GetCoreMetric();
+}
+
+std::unique_ptr<PanelLayout> PosSizePropertyPanel::Create (
+    weld::Widget* pParent,
+    const css::uno::Reference<css::frame::XFrame>& rxFrame,
+    SfxBindings* pBindings,
+    const css::uno::Reference<css::ui::XSidebar>& rxSidebar)
+{
+    if (pParent == nullptr)
+        throw lang::IllegalArgumentException("no parent Window given to PosSizePropertyPanel::Create", nullptr, 0);
+    if ( ! rxFrame.is())
+        throw lang::IllegalArgumentException("no XFrame given to PosSizePropertyPanel::Create", nullptr, 1);
+    if (pBindings == nullptr)
+        throw lang::IllegalArgumentException("no SfxBindings given to PosSizePropertyPanel::Create", nullptr, 2);
+
+    return std::make_unique<PosSizePropertyPanel>(pParent, rxFrame, pBindings, rxSidebar);
+}
+
+void PosSizePropertyPanel::HandleContextChange(
+    const vcl::EnumContext& rContext)
+{
+    if (maContext == rContext)
+    {
+        // Nothing to do.
+        return;
+    }
+
+    maContext = rContext;
+
+    bool bShowPosition = false;
+    bool bShowAngle = false;
+    bool bShowFlip = false;
+    bool bShowEditObject = false;
+    bool bShowArrangeTbx2 = false;
+
+    switch (maContext.GetCombinedContext_DI())
+    {
+        case CombinedEnumContext(Application::WriterVariants, Context::Draw):
+            bShowAngle = true;
+            bShowFlip = true;
+            bShowArrangeTbx2 = true;
+            break;
+
+        case CombinedEnumContext(Application::WriterVariants, Context::Graphic):
+            bShowFlip = true;
+            bShowAngle = true; // RotGrfFlyFrame: Writer FlyFrames for Graphics now support angle
+            break;
+
+        case CombinedEnumContext(Application::Calc, Context::Draw):
+        case CombinedEnumContext(Application::Calc, Context::DrawLine):
+        case CombinedEnumContext(Application::Calc, Context::Graphic):
+        case CombinedEnumContext(Application::DrawImpress, Context::Draw):
+        case CombinedEnumContext(Application::DrawImpress, Context::DrawLine):
+        case CombinedEnumContext(Application::DrawImpress, Context::TextObject):
+        case CombinedEnumContext(Application::DrawImpress, Context::Graphic):
+            bShowPosition = true;
+            bShowAngle = true;
+            bShowFlip = true;
+            break;
+
+        case CombinedEnumContext(Application::WriterVariants, Context::OLE):
+            bShowEditObject = true;
+            break;
+
+        case CombinedEnumContext(Application::Calc, Context::OLE):
+        case CombinedEnumContext(Application::DrawImpress, Context::OLE):
+            bShowPosition = true;
+            bShowEditObject = true;
+            break;
+
+        case CombinedEnumContext(Application::Calc, Context::Chart):
+        case CombinedEnumContext(Application::Calc, Context::Form):
+        case CombinedEnumContext(Application::Calc, Context::Media):
+        case CombinedEnumContext(Application::Calc, Context::MultiObject):
+        case CombinedEnumContext(Application::DrawImpress, Context::Media):
+        case CombinedEnumContext(Application::DrawImpress, Context::Form):
+        case CombinedEnumContext(Application::DrawImpress, Context::ThreeDObject):
+        case CombinedEnumContext(Application::DrawImpress, Context::MultiObject):
+            bShowPosition = true;
+            break;
+    }
+
+    // Position
+    mxFtPosX->set_visible(bShowPosition);
+    mxMtrPosX->set_visible(bShowPosition);
+    mxFtPosY->set_visible(bShowPosition);
+    mxMtrPosY->set_visible(bShowPosition);
+
+    // Rotation
+    mxFtAngle->set_visible(bShowAngle);
+    mxMtrAngle->set_visible(bShowAngle);
+    mxCtrlDial->set_visible(bShowAngle);
+
+    // Flip
+    mxFtFlip->set_visible(bShowFlip);
+    mxFlipTbx->set_visible(bShowFlip);
+
+    // Edit Object
+    mxBtnEditOLEObject->set_visible(bShowEditObject);
+
+    // Arrange tool bar 2
+    mxArrangeTbx2->set_visible(bShowArrangeTbx2);
+
+    if (mxSidebar.is())
+        mxSidebar->requestLayout();
+}
+
+
+IMPL_LINK_NOARG( PosSizePropertyPanel, ChangeWidthHdl, weld::MetricSpinButton&, void )
+{
+    if( mxCbxScale->get_active() &&
+        mxCbxScale->get_sensitive() )
+    {
+        tools::Long nHeight = static_cast<tools::Long>( (static_cast<double>(mlOldHeight) * static_cast<double>(mxMtrWidth->get_value(FieldUnit::NONE))) / static_cast<double>(mlOldWidth) );
+        if( nHeight <= mxMtrHeight->get_max( FieldUnit::NONE ) )
+        {
+            mxMtrHeight->set_value( nHeight, FieldUnit::NONE );
+        }
+        else
+        {
+            nHeight = static_cast<tools::Long>(mxMtrHeight->get_max( FieldUnit::NONE ));
+            mxMtrHeight->set_value(nHeight, FieldUnit::NONE);
+            const tools::Long nWidth = static_cast<tools::Long>( (static_cast<double>(mlOldWidth) * static_cast<double>(nHeight)) / static_cast<double>(mlOldHeight) );
+            mxMtrWidth->set_value( nWidth, FieldUnit::NONE );
+        }
+    }
+    executeSize();
+}
+
+
+IMPL_LINK_NOARG( PosSizePropertyPanel, ChangeHeightHdl, weld::MetricSpinButton&, void )
+{
+    if( mxCbxScale->get_active() &&
+        mxCbxScale->get_sensitive() )
+    {
+        tools::Long nWidth = static_cast<tools::Long>( (static_cast<double>(mlOldWidth) * static_cast<double>(mxMtrHeight->get_value(FieldUnit::NONE))) / static_cast<double>(mlOldHeight) );
+        if( nWidth <= mxMtrWidth->get_max( FieldUnit::NONE ) )
+        {
+            mxMtrWidth->set_value( nWidth, FieldUnit::NONE );
+        }
+        else
+        {
+            nWidth = static_cast<tools::Long>(mxMtrWidth->get_max( FieldUnit::NONE ));
+            mxMtrWidth->set_value( nWidth, FieldUnit::NONE );
+            const tools::Long nHeight = static_cast<tools::Long>( (static_cast<double>(mlOldHeight) * static_cast<double>(nWidth)) / static_cast<double>(mlOldWidth) );
+            mxMtrHeight->set_value( nHeight, FieldUnit::NONE );
+        }
+    }
+    executeSize();
+}
+
+
+IMPL_LINK_NOARG( PosSizePropertyPanel, ChangePosXHdl, weld::MetricSpinButton&, void )
+{
+    if ( mxMtrPosX->get_value_changed_from_saved())
+    {
+        tools::Long lX = GetCoreValue( *mxMtrPosX, mePoolUnit );
+
+        Fraction aUIScale = mpView->GetModel()->GetUIScale();
+        lX = tools::Long( lX * aUIScale );
+
+        SfxInt32Item aPosXItem( SID_ATTR_TRANSFORM_POS_X,static_cast<sal_uInt32>(lX));
+
+        GetBindings()->GetDispatcher()->ExecuteList(
+            SID_ATTR_TRANSFORM, SfxCallMode::RECORD, { &aPosXItem });
+    }
+}
+
+IMPL_LINK_NOARG( PosSizePropertyPanel, ChangePosYHdl, weld::MetricSpinButton&, void )
+{
+    if ( mxMtrPosY->get_value_changed_from_saved() )
+    {
+        tools::Long lY = GetCoreValue( *mxMtrPosY, mePoolUnit );
+
+        Fraction aUIScale = mpView->GetModel()->GetUIScale();
+        lY = tools::Long( lY * aUIScale );
+
+        SfxInt32Item aPosYItem( SID_ATTR_TRANSFORM_POS_Y,static_cast<sal_uInt32>(lY));
+
+        GetBindings()->GetDispatcher()->ExecuteList(
+            SID_ATTR_TRANSFORM, SfxCallMode::RECORD, { &aPosYItem });
+    }
+}
+
+IMPL_LINK_NOARG( PosSizePropertyPanel, ClickAutoHdl, weld::Toggleable&, void )
+{
+    if ( mxCbxScale->get_active() )
+    {
+        mlOldWidth  = std::max(GetCoreValue(*mxMtrWidth,  mePoolUnit), SAL_CONST_INT64(1));
+        mlOldHeight = std::max(GetCoreValue(*mxMtrHeight, mePoolUnit), SAL_CONST_INT64(1));
+    }
+
+    // mxCbxScale must synchronized with that on Position and Size tabpage on Shape Properties dialog
+    SvtViewOptions aPageOpt(EViewType::TabPage, "cui/ui/possizetabpage/PositionAndSize");
+    aPageOpt.SetUserItem( USERITEM_NAME, css::uno::Any( OUString::number( int(mxCbxScale->get_active()) ) ) );
+}
+
+IMPL_LINK_NOARG( PosSizePropertyPanel, RotationHdl, DialControl&, void )
+{
+    Degree100 nTmp = mxCtrlDial->GetRotation();
+
+    // #i123993# Need to take UIScale into account when executing rotations
+    const double fUIScale(mpView && mpView->GetModel() ? double(mpView->GetModel()->GetUIScale()) : 1.0);
+    SdrAngleItem aAngleItem( SID_ATTR_TRANSFORM_ANGLE, nTmp);
+    SfxInt32Item aRotXItem( SID_ATTR_TRANSFORM_ROT_X, basegfx::fround(mlRotX * fUIScale));
+    SfxInt32Item aRotYItem( SID_ATTR_TRANSFORM_ROT_Y, basegfx::fround(mlRotY * fUIScale));
+
+    GetBindings()->GetDispatcher()->ExecuteList(SID_ATTR_TRANSFORM,
+            SfxCallMode::RECORD, { &aAngleItem, &aRotXItem, &aRotYItem });
+}
+
+IMPL_STATIC_LINK_NOARG( PosSizePropertyPanel, ClickObjectEditHdl, weld::Button&, void )
+{
+    SfxViewShell* pCurSh = SfxViewShell::Current();
+    if ( pCurSh)
+    {
+        pCurSh->DoVerb( -1 );
+    }
+}
+
+namespace
+{
+    void limitWidth(weld::MetricSpinButton& rMetricSpinButton)
+    {
+        // space is limited in the sidebar, so limit MetricSpinButtons to a width of 7 digits
+        const int nMaxDigits = 7;
+
+        weld::SpinButton& rSpinButton = rMetricSpinButton.get_widget();
+        rSpinButton.set_width_chars(std::min(rSpinButton.get_width_chars(), nMaxDigits));
+    }
+}
+
+void PosSizePropertyPanel::NotifyItemUpdate(
+    sal_uInt16 nSID,
+    SfxItemState eState,
+    const SfxPoolItem* pState)
+{
+    mxFtAngle->set_sensitive(true);
+    mxMtrAngle->set_sensitive(true);
+    mxDial->set_sensitive(true);
+    mxFtFlip->set_sensitive(true);
+    mxFlipTbx->set_sensitive(true);
+
+    const SfxUInt32Item*    pWidthItem;
+    const SfxUInt32Item*    pHeightItem;
+
+    SfxViewShell* pCurSh = SfxViewShell::Current();
+    if ( pCurSh )
+        mpView = pCurSh->GetDrawView();
+    else
+        mpView = nullptr;
+
+    if ( mpView == nullptr )
+        return;
+
+    mbAdjustEnabled = hasText(*mpView);
+
+    // Pool unit and dialog unit may have changed, make sure that we
+    // have the current values.
+    mePoolUnit = maTransfWidthControl.GetCoreMetric();
+
+    switch (nSID)
+    {
+        case SID_ATTR_TRANSFORM_WIDTH:
+            if ( SfxItemState::DEFAULT == eState )
+            {
+                pWidthItem = dynamic_cast< const SfxUInt32Item* >(pState);
+
+                if(pWidthItem)
+                {
+                    tools::Long lOldWidth1 = tools::Long( pWidthItem->GetValue() / maUIScale );
+                    SetFieldUnit( *mxMtrWidth, meDlgUnit, true );
+                    SetMetricValue( *mxMtrWidth, lOldWidth1, mePoolUnit );
+                    limitWidth(*mxMtrWidth);
+                    mlOldWidth = lOldWidth1;
+                    mxMtrWidth->save_value();
+                    break;
+                }
+            }
+
+            mxMtrWidth->set_text( "" );
+            break;
+
+        case SID_ATTR_TRANSFORM_HEIGHT:
+            if ( SfxItemState::DEFAULT == eState )
+            {
+                pHeightItem = dynamic_cast< const SfxUInt32Item* >(pState);
+
+                if(pHeightItem)
+                {
+                    tools::Long nTmp = tools::Long( pHeightItem->GetValue() / maUIScale);
+                    SetFieldUnit( *mxMtrHeight, meDlgUnit, true );
+                    SetMetricValue( *mxMtrHeight, nTmp, mePoolUnit );
+                    limitWidth(*mxMtrHeight);
+                    mlOldHeight = nTmp;
+                    mxMtrHeight->save_value();
+                    break;
+                }
+            }
+
+            mxMtrHeight->set_text( "");
+            break;
+
+        case SID_ATTR_TRANSFORM_POS_X:
+            if(SfxItemState::DEFAULT == eState)
+            {
+                const SfxInt32Item* pItem = dynamic_cast< const SfxInt32Item* >(pState);
+
+                if(pItem)
+                {
+                    tools::Long nTmp = tools::Long(pItem->GetValue() / maUIScale);
+                    SetFieldUnit( *mxMtrPosX, meDlgUnit, true );
+                    SetMetricValue( *mxMtrPosX, nTmp, mePoolUnit );
+                    limitWidth(*mxMtrPosX);
+                    mxMtrPosX->save_value();
+                    break;
+                }
+            }
+
+            mxMtrPosX->set_text( "" );
+            break;
+
+        case SID_ATTR_TRANSFORM_POS_Y:
+            if(SfxItemState::DEFAULT == eState)
+            {
+                const SfxInt32Item* pItem = dynamic_cast< const SfxInt32Item* >(pState);
+
+                if(pItem)
+                {
+                    tools::Long nTmp = tools::Long(pItem->GetValue() / maUIScale);
+                    SetFieldUnit( *mxMtrPosY, meDlgUnit, true );
+                    SetMetricValue( *mxMtrPosY, nTmp, mePoolUnit );
+                    limitWidth(*mxMtrPosY);
+                    mxMtrPosY->save_value();
+                    break;
+                }
+            }
+
+            mxMtrPosY->set_text( "" );
+            break;
+
+        case SID_ATTR_TRANSFORM_ROT_X:
+            if (SfxItemState::DEFAULT == eState)
+            {
+                const SfxInt32Item* pItem = dynamic_cast< const SfxInt32Item* >(pState);
+
+                if(pItem)
+                {
+                    mlRotX = pItem->GetValue();
+                    mlRotX = tools::Long( mlRotX / maUIScale );
+                }
+            }
+            break;
+
+        case SID_ATTR_TRANSFORM_ROT_Y:
+            if (SfxItemState::DEFAULT == eState)
+            {
+                const SfxInt32Item* pItem = dynamic_cast< const SfxInt32Item* >(pState);
+
+                if(pItem)
+                {
+                    mlRotY = pItem->GetValue();
+                    mlRotY = tools::Long( mlRotY / maUIScale );
+                }
+            }
+            break;
+
+        case SID_ATTR_TRANSFORM_PROTECT_POS:
+            if(SfxItemState::DEFAULT == eState)
+            {
+                const SfxBoolItem* pItem = dynamic_cast< const SfxBoolItem* >(pState);
+
+                if(pItem)
+                {
+                    // record the state of position protect
+                    mbPositionProtected = pItem->GetValue();
+                    break;
+                }
+            }
+
+            mbPositionProtected = false;
+            break;
+
+        case SID_ATTR_TRANSFORM_PROTECT_SIZE:
+            if(SfxItemState::DEFAULT == eState)
+            {
+                const SfxBoolItem* pItem = dynamic_cast< const SfxBoolItem* >(pState);
+
+                if(pItem)
+                {
+                    // record the state of size protect
+                    mbSizeProtected = pItem->GetValue();
+                    break;
+                }
+            }
+
+            mbSizeProtected = false;
+            break;
+
+        case SID_ATTR_TRANSFORM_AUTOWIDTH:
+            if(SfxItemState::DEFAULT == eState)
+            {
+                const SfxBoolItem* pItem = dynamic_cast< const SfxBoolItem* >(pState);
+
+                if(pItem)
+                {
+                    mbAutoWidth = pItem->GetValue();
+                }
+            }
+            break;
+
+        case SID_ATTR_TRANSFORM_AUTOHEIGHT:
+            if(SfxItemState::DEFAULT == eState)
+            {
+                const SfxBoolItem* pItem = dynamic_cast< const SfxBoolItem* >(pState);
+
+                if(pItem)
+                {
+                    mbAutoHeight = pItem->GetValue();
+                }
+            }
+            break;
+
+        case SID_ATTR_TRANSFORM_ANGLE:
+            if (eState >= SfxItemState::DEFAULT)
+            {
+                const SdrAngleItem* pItem = dynamic_cast< const SdrAngleItem* >(pState);
+
+                if(pItem)
+                {
+                    Degree100 nTmp = NormAngle36000(pItem->GetValue());
+
+                    mxMtrAngle->set_value(nTmp.get(), FieldUnit::DEGREE);
+                    mxCtrlDial->SetRotation(nTmp);
+
+                    break;
+                }
+            }
+
+            mxMtrAngle->set_text( "" );
+            mxCtrlDial->SetRotation( 0_deg100 );
+            break;
+
+        case SID_ATTR_METRIC:
+            MetricState( eState, pState );
+            UpdateUIScale();
+            break;
+
+        default:
+            break;
+    }
+
+    const sal_Int32 nCombinedContext(maContext.GetCombinedContext_DI());
+    const SdrMarkList& rMarkList = mpView->GetMarkedObjectList();
+
+    switch (rMarkList.GetMarkCount())
+    {
+        case 0:
+            break;
+
+        case 1:
+        {
+            const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
+            const SdrObjKind eKind(pObj->GetObjIdentifier());
+
+            if(((nCombinedContext == CombinedEnumContext(Application::DrawImpress, Context::Draw)
+               || nCombinedContext == CombinedEnumContext(Application::DrawImpress, Context::TextObject)
+                 ) && SdrObjKind::Edge == eKind)
+               || SdrObjKind::Caption == eKind)
+            {
+                mxFtAngle->set_sensitive(false);
+                mxMtrAngle->set_sensitive(false);
+                mxDial->set_sensitive(false);
+                mxFlipTbx->set_sensitive(false);
+                mxFtFlip->set_sensitive(false);
+            }
+            break;
+        }
+
+        default:
+        {
+            sal_uInt16 nMarkObj = 0;
+            bool isNoEdge = true;
+
+            while(isNoEdge && rMarkList.GetMark(nMarkObj))
+            {
+                const SdrObject* pObj = rMarkList.GetMark(nMarkObj)->GetMarkedSdrObj();
+                const SdrObjKind eKind(pObj->GetObjIdentifier());
+
+                if(((nCombinedContext == CombinedEnumContext(Application::DrawImpress, Context::Draw)
+                  || nCombinedContext == CombinedEnumContext(Application::DrawImpress, Context::TextObject)
+                     ) && SdrObjKind::Edge == eKind)
+                  || SdrObjKind::Caption == eKind)
+                {
+                    isNoEdge = false;
+                    break;
+                }
+                nMarkObj++;
+            }
+
+            if(!isNoEdge)
+            {
+                mxFtAngle->set_sensitive(false);
+                mxMtrAngle->set_sensitive(false);
+                mxDial->set_sensitive(false);
+                mxFlipTbx->set_sensitive(false);
+                mxFtFlip->set_sensitive(false);
+            }
+            break;
+        }
+    }
+
+    if(nCombinedContext == CombinedEnumContext(Application::DrawImpress, Context::TextObject))
+    {
+        mxFlipTbx->set_sensitive(false);
+        mxFtFlip->set_sensitive(false);
+    }
+
+    DisableControls();
+
+    // mxCbxScale must synchronized with that on Position and Size tabpage on Shape Properties dialog
+    SvtViewOptions aPageOpt(EViewType::TabPage, "cui/ui/possizetabpage/PositionAndSize");
+    OUString  sUserData;
+    css::uno::Any  aUserItem = aPageOpt.GetUserItem( USERITEM_NAME );
+    OUString aTemp;
+    if ( aUserItem >>= aTemp )
+        sUserData = aTemp;
+    mxCbxScale->set_active(static_cast<bool>(sUserData.toInt32()));
+}
+
+void PosSizePropertyPanel::GetControlState(const sal_uInt16 nSID, boost::property_tree::ptree& rState)
+{
+    weld::MetricSpinButton* pControl = nullptr;
+    switch (nSID)
+    {
+        case SID_ATTR_TRANSFORM_POS_X:
+            pControl = mxMtrPosX.get();
+            break;
+        case SID_ATTR_TRANSFORM_POS_Y:
+            pControl = mxMtrPosY.get();
+            break;
+        case SID_ATTR_TRANSFORM_WIDTH:
+            pControl = mxMtrWidth.get();
+            break;
+        case SID_ATTR_TRANSFORM_HEIGHT:
+            pControl = mxMtrHeight.get();
+            break;
+    }
+
+    if (pControl && !pControl->get_text().isEmpty())
+    {
+        OUString sValue = Application::GetSettings().GetNeutralLocaleDataWrapper().
+            getNum(pControl->get_value(pControl->get_unit()), pControl->get_digits(), false, false);
+        rState.put(pControl->get_buildable_name().getStr(), sValue.toUtf8().getStr());
+    }
+}
+
+void PosSizePropertyPanel::executeSize()
+{
+    if ( !mxMtrWidth->get_value_changed_from_saved() && !mxMtrHeight->get_value_changed_from_saved())
+        return;
+
+    Fraction aUIScale = mpView->GetModel()->GetUIScale();
+
+    // get Width
+    double nWidth = static_cast<double>(mxMtrWidth->get_value(FieldUnit::MM_100TH));
+    tools::Long lWidth = tools::Long(nWidth * static_cast<double>(aUIScale));
+    lWidth = OutputDevice::LogicToLogic( lWidth, MapUnit::Map100thMM, mePoolUnit );
+    lWidth = static_cast<tools::Long>(mxMtrWidth->denormalize( lWidth ));
+
+    // get Height
+    double nHeight = static_cast<double>(mxMtrHeight->get_value(FieldUnit::MM_100TH));
+    tools::Long lHeight = tools::Long(nHeight * static_cast<double>(aUIScale));
+    lHeight = OutputDevice::LogicToLogic( lHeight, MapUnit::Map100thMM, mePoolUnit );
+    lHeight = static_cast<tools::Long>(mxMtrHeight->denormalize( lHeight ));
+
+    // put Width & Height to itemset
+    SfxUInt32Item aWidthItem( SID_ATTR_TRANSFORM_WIDTH, static_cast<sal_uInt32>(lWidth));
+    SfxUInt32Item aHeightItem( SID_ATTR_TRANSFORM_HEIGHT, static_cast<sal_uInt32>(lHeight));
+    SfxUInt16Item aPointItem (SID_ATTR_TRANSFORM_SIZE_POINT, sal_uInt16(RectPoint::LT));
+    const sal_Int32 nCombinedContext(maContext.GetCombinedContext_DI());
+
+    if( nCombinedContext == CombinedEnumContext(Application::WriterVariants, Context::Graphic)
+        || nCombinedContext == CombinedEnumContext(Application::WriterVariants, Context::OLE)
+        )
+    {
+        GetBindings()->GetDispatcher()->ExecuteList(SID_ATTR_TRANSFORM,
+            SfxCallMode::RECORD, { &aWidthItem, &aHeightItem, &aPointItem });
+    }
+    else
+    {
+        if ( (mxMtrWidth->get_value_changed_from_saved()) && (mxMtrHeight->get_value_changed_from_saved()))
+            GetBindings()->GetDispatcher()->ExecuteList(SID_ATTR_TRANSFORM,
+                SfxCallMode::RECORD, { &aWidthItem, &aHeightItem, &aPointItem });
+        else if( mxMtrWidth->get_value_changed_from_saved())
+            GetBindings()->GetDispatcher()->ExecuteList(SID_ATTR_TRANSFORM,
+                SfxCallMode::RECORD, { &aWidthItem, &aPointItem });
+        else if ( mxMtrHeight->get_value_changed_from_saved())
+            GetBindings()->GetDispatcher()->ExecuteList(SID_ATTR_TRANSFORM,
+                SfxCallMode::RECORD, { &aHeightItem, &aPointItem });
+    }
+}
+
+void PosSizePropertyPanel::DumpAsPropertyTree(tools::JsonWriter& rJsonWriter)
+{
+    if (meDlgUnit != GetCurrentUnit(SfxItemState::DEFAULT, nullptr))
+    {
+        mpBindings->Update( SID_ATTR_METRIC );
+    }
+
+    PanelLayout::DumpAsPropertyTree(rJsonWriter);
+}
+
+void PosSizePropertyPanel::MetricState( SfxItemState eState, const SfxPoolItem* pState )
+{
+    bool bPosXBlank = false;
+    bool bPosYBlank = false;
+    bool bWidthBlank = false;
+    bool bHeightBlank = false;
+
+    // #i124409# use the given Item to get the correct UI unit and initialize it
+    // and the Fields using it
+    meDlgUnit = GetCurrentUnit(eState,pState);
+
+    if (mxMtrPosX->get_text().isEmpty())
+        bPosXBlank = true;
+    SetFieldUnit( *mxMtrPosX, meDlgUnit, true );
+    if(bPosXBlank)
+        mxMtrPosX->set_text(OUString());
+
+    if (mxMtrPosY->get_text().isEmpty())
+        bPosYBlank = true;
+    SetFieldUnit( *mxMtrPosY, meDlgUnit, true );
+    if(bPosYBlank)
+        mxMtrPosY->set_text(OUString());
+    SetPosSizeMinMax();
+
+    if (mxMtrWidth->get_text().isEmpty())
+        bWidthBlank = true;
+    SetFieldUnit( *mxMtrWidth, meDlgUnit, true );
+    if(bWidthBlank)
+        mxMtrWidth->set_text(OUString());
+
+    if (mxMtrHeight->get_text().isEmpty())
+        bHeightBlank = true;
+    SetFieldUnit( *mxMtrHeight, meDlgUnit, true );
+    if(bHeightBlank)
+        mxMtrHeight->set_text(OUString());
+}
+
+
+FieldUnit PosSizePropertyPanel::GetCurrentUnit( SfxItemState eState, const SfxPoolItem* pState )
+{
+    FieldUnit eUnit = FieldUnit::NONE;
+
+    if ( pState && eState >= SfxItemState::DEFAULT )
+    {
+        eUnit = static_cast<FieldUnit>(static_cast<const SfxUInt16Item*>(pState)->GetValue());
+    }
+    else
+    {
+        SfxViewFrame* pFrame = SfxViewFrame::Current();
+        SfxObjectShell* pSh = nullptr;
+        if ( pFrame )
+            pSh = pFrame->GetObjectShell();
+        if ( pSh )
+        {
+            SfxModule* pModule = pSh->GetModule();
+            if ( pModule )
+            {
+                const SfxPoolItem* pItem = pModule->GetItem( SID_ATTR_METRIC );
+                if ( pItem )
+                    eUnit = static_cast<FieldUnit>(static_cast<const SfxUInt16Item*>(pItem)->GetValue());
+            }
+            else
+            {
+                SAL_WARN("svx.sidebar", "GetModuleFieldUnit(): no module found");
+            }
+        }
+    }
+
+    return eUnit;
+}
+
+
+void PosSizePropertyPanel::DisableControls()
+{
+    if( mbPositionProtected )
+    {
+        // the position is protected("Position protect" option in modal dialog is checked),
+        // disable all the Position controls in sidebar
+        mxFtPosX->set_sensitive(false);
+        mxMtrPosX->set_sensitive(false);
+        mxFtPosY->set_sensitive(false);
+        mxMtrPosY->set_sensitive(false);
+        mxFtAngle->set_sensitive(false);
+        mxMtrAngle->set_sensitive(false);
+        mxDial->set_sensitive(false);
+        mxFtFlip->set_sensitive(false);
+        mxFlipTbx->set_sensitive(false);
+
+        mxFtWidth->set_sensitive(false);
+        mxMtrWidth->set_sensitive(false);
+        mxFtHeight->set_sensitive(false);
+        mxMtrHeight->set_sensitive(false);
+        mxCbxScale->set_sensitive(false);
+    }
+    else
+    {
+        mxFtPosX->set_sensitive(true);
+        mxMtrPosX->set_sensitive(true);
+        mxFtPosY->set_sensitive(true);
+        mxMtrPosY->set_sensitive(true);
+
+        if( mbSizeProtected )
+        {
+            mxFtWidth->set_sensitive(false);
+            mxMtrWidth->set_sensitive(false);
+            mxFtHeight->set_sensitive(false);
+            mxMtrHeight->set_sensitive(false);
+            mxCbxScale->set_sensitive(false);
+        }
+        else
+        {
+            if( mbAdjustEnabled )
+            {
+                if( mbAutoWidth )
+                {
+                    mxFtWidth->set_sensitive(false);
+                    mxMtrWidth->set_sensitive(false);
+                    mxCbxScale->set_sensitive(false);
+                }
+                else
+                {
+                    mxFtWidth->set_sensitive(true);
+                    mxMtrWidth->set_sensitive(true);
+                }
+                if( mbAutoHeight )
+                {
+                    mxFtHeight->set_sensitive(false);
+                    mxMtrHeight->set_sensitive(false);
+                    mxCbxScale->set_sensitive(false);
+                }
+                else
+                {
+                    mxFtHeight->set_sensitive(true);
+                    mxMtrHeight->set_sensitive(true);
+                }
+                if( !mbAutoWidth && !mbAutoHeight )
+                    mxCbxScale->set_sensitive(true);
+            }
+            else
+            {
+                mxFtWidth->set_sensitive(true);
+                mxMtrWidth->set_sensitive(true);
+                mxFtHeight->set_sensitive(true);
+                mxMtrHeight->set_sensitive(true);
+                mxCbxScale->set_sensitive(true);
+            }
+        }
+    }
+}
+
+void PosSizePropertyPanel::SetPosSizeMinMax()
+{
+    SdrPageView* pPV = mpView->GetSdrPageView();
+    if (!pPV)
+        return;
+    tools::Rectangle aTmpRect(mpView->GetAllMarkedRect());
+    pPV->LogicToPagePos(aTmpRect);
+    maRect = vcl::unotools::b2DRectangleFromRectangle(aTmpRect);
+
+    tools::Rectangle aTmpRect2(mpView->GetWorkArea());
+    pPV->LogicToPagePos(aTmpRect2);
+    maWorkArea = vcl::unotools::b2DRectangleFromRectangle(aTmpRect2);
+
+    const Fraction aUIScale(mpView->GetModel()->GetUIScale());
+    TransfrmHelper::ScaleRect( maWorkArea, aUIScale );
+    TransfrmHelper::ScaleRect( maRect, aUIScale );
+
+    const sal_uInt16 nDigits(mxMtrPosX->get_digits());
+    TransfrmHelper::ConvertRect( maWorkArea, nDigits, mePoolUnit, meDlgUnit );
+    TransfrmHelper::ConvertRect( maRect, nDigits, mePoolUnit, meDlgUnit );
+
+    double fLeft(maWorkArea.getMinX());
+    double fTop(maWorkArea.getMinY());
+    double fRight(maWorkArea.getMaxX());
+    double fBottom(maWorkArea.getMaxY());
+
+    // seems that sidebar defaults to top left reference point
+    // and there's no way to set it to something else
+    fRight  -= maRect.getWidth();
+    fBottom -= maRect.getHeight();
+
+    const double fMaxLong(static_cast<double>(vcl::ConvertValue( LONG_MAX, 0, MapUnit::Map100thMM, meDlgUnit ) - 1));
+    fLeft = std::clamp(fLeft, -fMaxLong, fMaxLong);
+    fRight = std::clamp(fRight, -fMaxLong, fMaxLong);
+    fTop = std::clamp(fTop, - fMaxLong, fMaxLong);
+    fBottom = std::clamp(fBottom, -fMaxLong, fMaxLong);
+
+    mxMtrPosX->set_range(basegfx::fround64(fLeft), basegfx::fround64(fRight), FieldUnit::NONE);
+    limitWidth(*mxMtrPosX);
+    mxMtrPosY->set_range(basegfx::fround64(fTop), basegfx::fround64(fBottom), FieldUnit::NONE);
+    limitWidth(*mxMtrPosY);
+
+    double fMaxWidth = maWorkArea.getWidth() - (maRect.getWidth() - fLeft);
+    double fMaxHeight = maWorkArea.getHeight() - (maRect.getHeight() - fTop);
+    mxMtrWidth->set_max(std::min<sal_Int64>(INT_MAX, basegfx::fround64(fMaxWidth*100)), FieldUnit::NONE);
+    limitWidth(*mxMtrWidth);
+    mxMtrHeight->set_max(std::min<sal_Int64>(INT_MAX, basegfx::fround64(fMaxHeight*100)), FieldUnit::NONE);
+    limitWidth(*mxMtrHeight);
+}
+
+void PosSizePropertyPanel::UpdateUIScale()
+{
+    const Fraction aUIScale (mpView->GetModel()->GetUIScale());
+    if (maUIScale == aUIScale)
+        return;
+
+    // UI scale has changed.
+
+    // Remember the new UI scale.
+    maUIScale = aUIScale;
+
+    // The content of the position and size boxes is only updated when item changes are notified.
+    // Request such notifications without changing the actual item values.
+    GetBindings()->Invalidate(SID_ATTR_TRANSFORM_POS_X, true);
+    GetBindings()->Invalidate(SID_ATTR_TRANSFORM_POS_Y, true);
+    GetBindings()->Invalidate(SID_ATTR_TRANSFORM_WIDTH, true);
+    GetBindings()->Invalidate(SID_ATTR_TRANSFORM_HEIGHT, true);
+}
+
+
+} // end of namespace svx::sidebar
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/svx/source/sidebar/possize/PosSizePropertyPanel.hxx b/svx/source/sidebar/possize/PosSizePropertyPanel.hxx
new file mode 100644
index 000000000..ede3d3e44
--- /dev/null
+++ b/svx/source/sidebar/possize/PosSizePropertyPanel.hxx
@@ -0,0 +1,193 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+#ifndef INCLUDED_SVX_SOURCE_SIDEBAR_POSSIZE_POSSIZEPROPERTYPANEL_HXX
+#define INCLUDED_SVX_SOURCE_SIDEBAR_POSSIZE_POSSIZEPROPERTYPANEL_HXX
+
+#include <sfx2/sidebar/ControllerItem.hxx>
+#include <sfx2/sidebar/IContextChangeReceiver.hxx>
+#include <sfx2/weldutils.hxx>
+#include <sfx2/sidebar/PanelLayout.hxx>
+#include <svl/poolitem.hxx>
+#include <tools/fldunit.hxx>
+#include <tools/fract.hxx>
+#include <com/sun/star/ui/XSidebar.hpp>
+#include <basegfx/range/b2drange.hxx>
+#include <vcl/EnumContext.hxx>
+#include <vcl/customweld.hxx>
+#include <vcl/weld.hxx>
+
+class SdrView;
+
+namespace svx {
+class DialControl;
+};
+
+namespace svx::sidebar {
+
+class PosSizePropertyPanel
+:   public PanelLayout,
+    public ::sfx2::sidebar::IContextChangeReceiver,
+    public ::sfx2::sidebar::ControllerItem::ItemUpdateReceiverInterface
+{
+public:
+    virtual ~PosSizePropertyPanel() override;
+
+    static std::unique_ptr<PanelLayout> Create(
+        weld::Widget* pParent,
+        const css::uno::Reference<css::frame::XFrame>& rxFrame,
+        SfxBindings* pBindings,
+        const css::uno::Reference<css::ui::XSidebar>& rxSidebar);
+
+    virtual void HandleContextChange(
+        const vcl::EnumContext& rContext) override;
+
+    virtual void NotifyItemUpdate(
+        const sal_uInt16 nSId,
+        const SfxItemState eState,
+        const SfxPoolItem* pState) override;
+
+    virtual void DumpAsPropertyTree(tools::JsonWriter&) override;
+
+    SfxBindings* GetBindings() { return mpBindings;}
+
+    // constructor/destructor
+    PosSizePropertyPanel(
+        weld::Widget* pParent,
+        const css::uno::Reference<css::frame::XFrame>& rxFrame,
+        SfxBindings* pBindings,
+        const css::uno::Reference<css::ui::XSidebar>& rxSidebar);
+
+    virtual void GetControlState(
+        const sal_uInt16 nSId,
+        boost::property_tree::ptree& rState) override;
+
+private:
+    //Position
+    std::unique_ptr<weld::Label> mxFtPosX;
+    std::unique_ptr<weld::MetricSpinButton> mxMtrPosX;
+    std::unique_ptr<weld::Label> mxFtPosY;
+    std::unique_ptr<weld::MetricSpinButton> mxMtrPosY;
+
+    // size
+    std::unique_ptr<weld::Label> mxFtWidth;
+    std::unique_ptr<weld::MetricSpinButton> mxMtrWidth;
+    std::unique_ptr<weld::Label> mxFtHeight;
+    std::unique_ptr<weld::MetricSpinButton> mxMtrHeight;
+    std::unique_ptr<weld::CheckButton> mxCbxScale;
+
+    //rotation
+    std::unique_ptr<weld::Label> mxFtAngle;
+    std::unique_ptr<weld::MetricSpinButton> mxMtrAngle;
+
+    //rotation control
+    std::unique_ptr<svx::DialControl> mxCtrlDial;
+    std::unique_ptr<weld::CustomWeld> mxDial;
+
+    //flip
+    std::unique_ptr<weld::Label> mxFtFlip;
+    std::unique_ptr<weld::Toolbar> mxFlipTbx;
+    std::unique_ptr<ToolbarUnoDispatcher> mxFlipDispatch;
+
+    std::unique_ptr<weld::Toolbar> mxArrangeTbx;
+    std::unique_ptr<ToolbarUnoDispatcher> mxArrangeDispatch;
+    std::unique_ptr<weld::Toolbar> mxArrangeTbx2;
+    std::unique_ptr<ToolbarUnoDispatcher> mxArrangeDispatch2;
+
+    std::unique_ptr<weld::Toolbar> mxAlignTbx;
+    std::unique_ptr<ToolbarUnoDispatcher> mxAlignDispatch;
+    std::unique_ptr<weld::Toolbar> mxAlignTbx2;
+    std::unique_ptr<ToolbarUnoDispatcher> mxAlignDispatch2;
+
+    //edit objects button for online's mobile view
+    std::unique_ptr<weld::Button> mxBtnEditOLEObject;
+
+    // Internal variables
+    basegfx::B2DRange                       maRect;
+    basegfx::B2DRange                       maWorkArea;
+    const SdrView*                          mpView;
+    sal_uInt32                              mlOldWidth;
+    sal_uInt32                              mlOldHeight;
+    tools::Long                                    mlRotX;
+    tools::Long                                    mlRotY;
+    Fraction                                maUIScale;
+    MapUnit                                 mePoolUnit;
+    FieldUnit                               meDlgUnit;
+
+    // Controller Items
+    ::sfx2::sidebar::ControllerItem         maTransfPosXControl;
+    ::sfx2::sidebar::ControllerItem         maTransfPosYControl;
+    ::sfx2::sidebar::ControllerItem         maTransfWidthControl;
+    ::sfx2::sidebar::ControllerItem         maTransfHeightControl;
+
+    ::sfx2::sidebar::ControllerItem         maSvxAngleControl;
+    ::sfx2::sidebar::ControllerItem         maRotXControl;
+    ::sfx2::sidebar::ControllerItem         maRotYControl;
+    ::sfx2::sidebar::ControllerItem         maProPosControl;
+    ::sfx2::sidebar::ControllerItem         maProSizeControl;
+    ::sfx2::sidebar::ControllerItem         maAutoWidthControl;
+    ::sfx2::sidebar::ControllerItem         maAutoHeightControl;
+    ::sfx2::sidebar::ControllerItem         m_aMetricCtl;
+
+    vcl::EnumContext                        maContext;
+    SfxBindings*                            mpBindings;
+
+    bool                                    mbSizeProtected : 1;
+    bool                                    mbPositionProtected : 1;
+    bool                                    mbAutoWidth : 1;
+    bool                                    mbAutoHeight : 1;
+    bool                                    mbAdjustEnabled : 1;
+
+    css::uno::Reference<css::ui::XSidebar> mxSidebar;
+
+    DECL_LINK( ChangePosXHdl, weld::MetricSpinButton&, void );
+    DECL_LINK( ChangePosYHdl, weld::MetricSpinButton&, void );
+    DECL_LINK( ChangeWidthHdl, weld::MetricSpinButton&, void );
+    DECL_LINK( ChangeHeightHdl, weld::MetricSpinButton&, void );
+    DECL_LINK( ClickAutoHdl, weld::Toggleable&, void );
+    DECL_LINK( RotationHdl, svx::DialControl&, void );
+    DECL_STATIC_LINK( PosSizePropertyPanel, ClickObjectEditHdl, weld::Button&, void );
+
+    void Initialize();
+    void executeSize();
+
+    void MetricState( SfxItemState eState, const SfxPoolItem* pState );
+    static FieldUnit GetCurrentUnit( SfxItemState eState, const SfxPoolItem* pState );
+    void DisableControls();
+    void SetPosSizeMinMax();
+
+    /** Check if the UI scale has changed and handle such a change.
+        UI scale is an SD only feature.  The UI scale is represented by items
+        ATTR_OPTIONS_SCALE_X and
+        ATTR_OPTIONS_SCALE_Y.
+        As we have no direct access (there is no dependency of svx on sd) we have to
+        use a small trick (aka hack):
+        a) call this method whenever a change of the metric item is notified,
+        b) check if the UI scale has changed (strangely, the UI scale value is available at the SdrModel.
+        c) invalidate the items for position and size to trigger notifications of their current values.
+    */
+    void UpdateUIScale();
+};
+
+
+} // end of namespace svx::sidebar
+
+
+#endif // INCLUDED_SVX_SOURCE_SIDEBAR_POSSIZE_POSSIZEPROPERTYPANEL_HXX
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */