Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1989 insertions, 0 deletions

diff --git a/sw/source/uibase/uiview/view.cxx b/sw/source/uibase/uiview/view.cxx
new file mode 100644
index 000000000..ceb0de4c3
--- /dev/null
+++ b/sw/source/uibase/uiview/view.cxx
@@ -0,0 +1,1989 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/config.h>
+
+#include <string_view>
+
+#include <config_features.h>
+#include <config_wasm_strip.h>
+
+#include <stdlib.h>
+#include <hintids.hxx>
+#include <comphelper/string.hxx>
+#include <o3tl/any.hxx>
+#include <o3tl/string_view.hxx>
+#include <officecfg/Office/Common.hxx>
+#include <vcl/graph.hxx>
+#include <vcl/inputctx.hxx>
+#include <svl/eitem.hxx>
+#include <unotools/configmgr.hxx>
+#include <unotools/lingucfg.hxx>
+#include <unotools/useroptions.hxx>
+#include <sfx2/dispatch.hxx>
+#include <sfx2/docfile.hxx>
+#include <sfx2/objface.hxx>
+#include <sfx2/request.hxx>
+#include <svx/ruler.hxx>
+#include <svx/srchdlg.hxx>
+#include <svx/fmshell.hxx>
+#include <svx/extrusionbar.hxx>
+#include <svx/fontworkbar.hxx>
+#include <svx/fmview.hxx>
+#include <unotxvw.hxx>
+#include <cmdid.h>
+#include <svl/hint.hxx>
+#include <swmodule.hxx>
+#include <inputwin.hxx>
+#include <uivwimp.hxx>
+#include <edtwin.hxx>
+#include <textsh.hxx>
+#include <listsh.hxx>
+#include <tabsh.hxx>
+#include <grfsh.hxx>
+#include <mediash.hxx>
+#include <docsh.hxx>
+#include <frmsh.hxx>
+#include <olesh.hxx>
+#include <drawsh.hxx>
+#include <drawbase.hxx>
+#include <drformsh.hxx>
+#include <drwtxtsh.hxx>
+#include <beziersh.hxx>
+#include <navsh.hxx>
+#include <globdoc.hxx>
+#include <scroll.hxx>
+#include <gloshdl.hxx>
+#include <usrpref.hxx>
+#include <srcview.hxx>
+#include <doc.hxx>
+#include <IDocumentUndoRedo.hxx>
+#include <IDocumentSettingAccess.hxx>
+#include <IDocumentDrawModelAccess.hxx>
+#include <DocumentFieldsManager.hxx>
+#include <IDocumentState.hxx>
+#include <IDocumentLayoutAccess.hxx>
+#include <drawdoc.hxx>
+#include <wdocsh.hxx>
+#include <wrtsh.hxx>
+#include <barcfg.hxx>
+#include <pview.hxx>
+#include <swdtflvr.hxx>
+#include <prtopt.hxx>
+#include <com/sun/star/frame/FrameSearchFlag.hpp>
+#include <com/sun/star/frame/XLayoutManager.hpp>
+#include <com/sun/star/scanner/ScannerContext.hpp>
+#include <com/sun/star/scanner/XScannerManager2.hpp>
+#include <com/sun/star/lang/XMultiServiceFactory.hpp>
+#include <com/sun/star/sdb/XDatabaseContext.hpp>
+#include <com/sun/star/sdb/DatabaseContext.hpp>
+#include <toolkit/helper/vclunohelper.hxx>
+#include <sal/log.hxx>
+
+#include <formatclipboard.hxx>
+#include <PostItMgr.hxx>
+#include <annotsh.hxx>
+#include <swruler.hxx>
+
+#include <com/sun/star/document/XDocumentProperties.hpp>
+#include <com/sun/star/document/XDocumentPropertiesSupplier.hpp>
+
+#include <comphelper/propertyvalue.hxx>
+#include <sfx2/lokhelper.hxx>
+#include <LibreOfficeKit/LibreOfficeKitEnums.h>
+#include <svtools/embedhlp.hxx>
+#include <tools/UnitConversion.hxx>
+
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::lang;
+using namespace ::com::sun::star::scanner;
+using namespace ::com::sun::star::sdb;
+using namespace ::com::sun::star::sdbc;
+
+#define SWVIEWFLAGS SfxViewShellFlags::HAS_PRINTOPTIONS
+
+// Statics. OMG.
+
+bool bDocSzUpdated = true;
+
+SvxSearchItem*  SwView::s_pSrchItem   = nullptr;
+
+bool            SwView::s_bExtra      = false;
+bool            SwView::s_bFound      = false;
+bool            SwView::s_bJustOpened = false;
+
+std::unique_ptr<SearchAttrItemList>  SwView::s_xSearchList;
+std::unique_ptr<SearchAttrItemList>  SwView::s_xReplaceList;
+
+SfxDispatcher &SwView::GetDispatcher()
+{
+    return *GetViewFrame()->GetDispatcher();
+}
+
+void SwView::ImpSetVerb( SelectionType nSelType )
+{
+    bool bResetVerbs = m_bVerbsActive;
+    if ( !GetViewFrame()->GetFrame().IsInPlace() &&
+         (SelectionType::Ole|SelectionType::Graphic) & nSelType )
+    {
+        FlyProtectFlags eProtectFlags = m_pWrtShell->IsSelObjProtected(FlyProtectFlags::Content);
+        if (eProtectFlags == FlyProtectFlags::NONE || nSelType & SelectionType::Ole)
+        {
+            if ( nSelType & SelectionType::Ole )
+            {
+                SetVerbs( GetWrtShell().GetOLEObject()->getSupportedVerbs() );
+                m_bVerbsActive = true;
+                bResetVerbs = false;
+            }
+        }
+    }
+    if ( bResetVerbs )
+    {
+        SetVerbs( Sequence< embed::VerbDescriptor >() );
+        m_bVerbsActive = false;
+    }
+}
+
+// Called by the SwEditWin when it gets the focus.
+
+void SwView::GotFocus() const
+{
+    // if we got the focus, and the form shell *is* on the top of the dispatcher
+    // stack, then we need to rebuild the stack (the form shell doesn't belong to
+    // the top then)
+    const SfxDispatcher& rDispatcher = const_cast< SwView* >( this )->GetDispatcher();
+    SfxShell* pTopShell = rDispatcher.GetShell( 0 );
+    FmFormShell* pAsFormShell = dynamic_cast<FmFormShell*>( pTopShell  );
+    if ( pAsFormShell )
+    {
+        pAsFormShell->ForgetActiveControl();
+        const_cast< SwView* >( this )->AttrChangedNotify(nullptr);
+    }
+    else if ( m_pPostItMgr )
+    {
+        SwAnnotationShell* pAsAnnotationShell = dynamic_cast<SwAnnotationShell*>( pTopShell  );
+        if ( pAsAnnotationShell )
+        {
+            m_pPostItMgr->SetActiveSidebarWin(nullptr);
+            const_cast< SwView* >( this )->AttrChangedNotify(nullptr);
+        }
+    }
+    if( GetWrtShellPtr() )
+    {
+        SwWrtShell& rWrtShell = GetWrtShell();
+        rWrtShell.GetDoc()->getIDocumentLayoutAccess().SetCurrentViewShell( GetWrtShellPtr() );
+        rWrtShell.GetDoc()->getIDocumentSettingAccess().set( DocumentSettingId::BROWSE_MODE,
+                                 rWrtShell.GetViewOptions()->getBrowseMode() );
+    }
+}
+
+// called by the FormShell when a form control is focused. This is
+// a request to put the form shell on the top of the dispatcher stack
+
+IMPL_LINK_NOARG(SwView, FormControlActivated, LinkParamNone*, void)
+{
+    // if a form control has been activated, and the form shell is not on the top
+    // of the dispatcher stack, then we need to activate it
+    const SfxDispatcher& rDispatcher = GetDispatcher();
+    const SfxShell* pTopShell = rDispatcher.GetShell( 0 );
+    const FmFormShell* pAsFormShell = dynamic_cast<const FmFormShell*>( pTopShell  );
+    if ( !pAsFormShell )
+    {
+        // if we're editing text currently, cancel this
+        SdrView *pSdrView = m_pWrtShell ? m_pWrtShell->GetDrawView() : nullptr;
+        if ( pSdrView && pSdrView->IsTextEdit() )
+            pSdrView->SdrEndTextEdit( true );
+
+        AttrChangedNotify(nullptr);
+    }
+}
+
+namespace
+{
+uno::Reference<frame::XLayoutManager> getLayoutManager(const SfxViewFrame& rViewFrame)
+{
+    uno::Reference<frame::XLayoutManager> xLayoutManager;
+    uno::Reference<beans::XPropertySet> xPropSet(rViewFrame.GetFrame().GetFrameInterface(),
+                                                 uno::UNO_QUERY);
+    if (xPropSet.is())
+    {
+        try
+        {
+            xLayoutManager.set(xPropSet->getPropertyValue("LayoutManager"), uno::UNO_QUERY);
+        }
+        catch (const Exception& e)
+        {
+            SAL_WARN("sw.ui", "Failure getting layout manager: " + e.Message);
+        }
+    }
+    return xLayoutManager;
+}
+}
+
+void SwView::ShowUIElement(const OUString& sElementURL) const
+{
+    if (auto xLayoutManager = getLayoutManager(*GetViewFrame()))
+    {
+        if (!xLayoutManager->getElement(sElementURL).is())
+        {
+            xLayoutManager->createElement(sElementURL);
+            xLayoutManager->showElement(sElementURL);
+        }
+    }
+}
+
+void SwView::SelectShell()
+{
+    // Attention: Maintain the SelectShell for the WebView additionally
+
+    if(m_bInDtor)
+        return;
+
+    // Decision if the UpdateTable has to be called
+    bool bUpdateTable = false;
+    const SwFrameFormat* pCurTableFormat = m_pWrtShell->GetTableFormat();
+    if(pCurTableFormat && pCurTableFormat != m_pLastTableFormat)
+    {
+        bUpdateTable = true; // can only be executed later
+    }
+    m_pLastTableFormat = pCurTableFormat;
+
+    //SEL_TBL and SEL_TBL_CELLS can be ORed!
+    SelectionType nNewSelectionType = m_pWrtShell->GetSelectionType()
+                                & ~SelectionType::TableCell;
+
+    // Determine if a different fly frame was selected.
+    bool bUpdateFly = false;
+    const SwFrameFormat* pCurFlyFormat = nullptr;
+    if (m_nSelectionType & SelectionType::Ole || m_nSelectionType & SelectionType::Graphic)
+    {
+        pCurFlyFormat = m_pWrtShell->GetFlyFrameFormat();
+    }
+    if (pCurFlyFormat && pCurFlyFormat != m_pLastFlyFormat)
+    {
+        bUpdateFly = true;
+    }
+    m_pLastFlyFormat = pCurFlyFormat;
+
+    if ( m_pFormShell && m_pFormShell->IsActiveControl() )
+        nNewSelectionType |= SelectionType::FormControl;
+
+    if ( nNewSelectionType == m_nSelectionType )
+    {
+        GetViewFrame()->GetBindings().InvalidateAll( false );
+        if ( m_nSelectionType & SelectionType::Ole ||
+             m_nSelectionType & SelectionType::Graphic )
+            // For graphs and OLE the verb can be modified of course!
+            ImpSetVerb( nNewSelectionType );
+
+        if (bUpdateFly)
+        {
+            SfxViewFrame* pViewFrame = GetViewFrame();
+            if (pViewFrame)
+            {
+                uno::Reference<frame::XFrame> xFrame = pViewFrame->GetFrame().GetFrameInterface();
+                if (xFrame.is())
+                {
+                    // Invalidate cached dispatch objects.
+                    xFrame->contextChanged();
+                }
+            }
+        }
+    }
+    else
+    {
+
+        SfxDispatcher &rDispatcher = GetDispatcher();
+        SwToolbarConfigItem *pBarCfg = SW_MOD()->GetToolbarConfig();
+
+        if ( m_pShell )
+        {
+            rDispatcher.Flush();        // Really erase all cached shells
+            //Remember to the old selection which toolbar was visible
+            ToolbarId eId = rDispatcher.GetObjectBarId(SFX_OBJECTBAR_OBJECT);
+            if (eId != ToolbarId::None)
+                pBarCfg->SetTopToolbar(m_nSelectionType, eId);
+
+            for ( sal_uInt16 i = 0; true; ++i )
+            {
+                SfxShell *pSfxShell = rDispatcher.GetShell( i );
+                if  (  dynamic_cast< const SwBaseShell *>( pSfxShell ) !=  nullptr
+                    || dynamic_cast< const SwDrawTextShell *>( pSfxShell ) !=  nullptr
+                    || dynamic_cast< const svx::ExtrusionBar*>( pSfxShell ) !=  nullptr
+                    || dynamic_cast< const svx::FontworkBar*>( pSfxShell ) !=  nullptr
+                    || dynamic_cast< const SwAnnotationShell *>( pSfxShell ) !=  nullptr
+                    )
+                {
+                    rDispatcher.Pop( *pSfxShell, SfxDispatcherPopFlags::POP_DELETE );
+                }
+                else if ( dynamic_cast< const FmFormShell *>( pSfxShell ) !=  nullptr )
+                {
+                    rDispatcher.Pop( *pSfxShell );
+                }
+                else
+                    break;
+            }
+        }
+
+        bool bInitFormShell = false;
+        if (!m_pFormShell)
+        {
+            bInitFormShell = true;
+            m_pFormShell = new FmFormShell( this );
+            m_pFormShell->SetControlActivationHandler( LINK( this, SwView, FormControlActivated ) );
+            StartListening(*m_pFormShell);
+        }
+
+        bool bSetExtInpCntxt = false;
+        m_nSelectionType = nNewSelectionType;
+        ShellMode eShellMode;
+
+        if ( !( m_nSelectionType & SelectionType::FormControl ) )
+            rDispatcher.Push( *m_pFormShell );
+
+        m_pShell = new SwNavigationShell( *this );
+        rDispatcher.Push( *m_pShell );
+
+        if ( m_nSelectionType & SelectionType::Ole )
+        {
+            eShellMode = ShellMode::Object;
+            m_pShell = new SwOleShell( *this );
+            rDispatcher.Push( *m_pShell );
+        }
+        else if ( m_nSelectionType & SelectionType::Frame
+            || m_nSelectionType & SelectionType::Graphic)
+        {
+            eShellMode = ShellMode::Frame;
+            m_pShell = new SwFrameShell( *this );
+            rDispatcher.Push( *m_pShell );
+            if(m_nSelectionType & SelectionType::Graphic )
+            {
+                eShellMode = ShellMode::Graphic;
+                m_pShell = new SwGrfShell( *this );
+                rDispatcher.Push( *m_pShell );
+            }
+        }
+        else if ( m_nSelectionType & SelectionType::DrawObject )
+        {
+            eShellMode = ShellMode::Draw;
+            m_pShell = new SwDrawShell( *this );
+            rDispatcher.Push( *m_pShell );
+
+            if ( m_nSelectionType & SelectionType::Ornament )
+            {
+                eShellMode = ShellMode::Bezier;
+                m_pShell = new SwBezierShell( *this );
+                rDispatcher.Push( *m_pShell );
+            }
+#if HAVE_FEATURE_AVMEDIA
+            else if( m_nSelectionType & SelectionType::Media )
+            {
+                eShellMode = ShellMode::Media;
+                m_pShell = new SwMediaShell( *this );
+                rDispatcher.Push( *m_pShell );
+            }
+#endif
+            if (m_nSelectionType & SelectionType::ExtrudedCustomShape)
+            {
+                eShellMode = ShellMode::ExtrudedCustomShape;
+                m_pShell = new svx::ExtrusionBar(this);
+                rDispatcher.Push( *m_pShell );
+            }
+            if (m_nSelectionType & SelectionType::FontWork)
+            {
+                eShellMode = ShellMode::FontWork;
+                m_pShell = new svx::FontworkBar(this);
+                rDispatcher.Push( *m_pShell );
+            }
+        }
+        else if ( m_nSelectionType & SelectionType::DbForm )
+        {
+            eShellMode = ShellMode::DrawForm;
+            m_pShell = new SwDrawFormShell( *this );
+
+            rDispatcher.Push( *m_pShell );
+        }
+        else if ( m_nSelectionType & SelectionType::DrawObjectEditMode )
+        {
+            bSetExtInpCntxt = true;
+            eShellMode = ShellMode::DrawText;
+            rDispatcher.Push( *(new SwBaseShell( *this )) );
+            m_pShell = new SwDrawTextShell( *this );
+            rDispatcher.Push( *m_pShell );
+        }
+        else if ( m_nSelectionType & SelectionType::PostIt )
+        {
+            eShellMode = ShellMode::PostIt;
+            m_pShell = new SwAnnotationShell( *this );
+            rDispatcher.Push( *m_pShell );
+        }
+        else
+        {
+            bSetExtInpCntxt = true;
+            eShellMode = ShellMode::Text;
+            if ( m_nSelectionType & SelectionType::NumberList )
+            {
+                eShellMode = ShellMode::ListText;
+                m_pShell = new SwListShell( *this );
+                rDispatcher.Push( *m_pShell );
+            }
+            m_pShell = new SwTextShell(*this);
+            rDispatcher.Push( *m_pShell );
+            if ( m_nSelectionType & SelectionType::Table )
+            {
+                eShellMode = eShellMode == ShellMode::ListText ? ShellMode::TableListText
+                                                        : ShellMode::TableText;
+                m_pShell = new SwTableShell( *this );
+                rDispatcher.Push( *m_pShell );
+            }
+        }
+
+        if ( m_nSelectionType & SelectionType::FormControl )
+            rDispatcher.Push( *m_pFormShell );
+
+        m_pViewImpl->SetShellMode(eShellMode);
+        ImpSetVerb( m_nSelectionType );
+
+        if( !GetDocShell()->IsReadOnly() )
+        {
+            if( bSetExtInpCntxt && GetWrtShell().HasReadonlySel() )
+                bSetExtInpCntxt = false;
+
+            InputContext aCntxt( GetEditWin().GetInputContext() );
+            aCntxt.SetOptions( bSetExtInpCntxt
+                                ? (aCntxt.GetOptions() |
+                                        ( InputContextFlags::Text |
+                                            InputContextFlags::ExtText ))
+                                : (aCntxt.GetOptions() & ~
+                                        InputContextFlags( InputContextFlags::Text |
+                                            InputContextFlags::ExtText )) );
+            GetEditWin().SetInputContext( aCntxt );
+        }
+
+        // Show Mail Merge toolbar initially for documents with Database fields
+        if (!m_bInitOnceCompleted && GetWrtShell().IsAnyDatabaseFieldInDoc())
+            ShowUIElement("private:resource/toolbar/mailmerge");
+
+        // Activate the toolbar to the new selection which also was active last time.
+        // Before a flush () must be, but does not affect the UI according to MBA and
+        // is not a performance problem.
+        // TODO/LATER: maybe now the Flush() command is superfluous?!
+        rDispatcher.Flush();
+
+        Point aPnt = GetEditWin().OutputToScreenPixel(GetEditWin().GetPointerPosPixel());
+        aPnt = GetEditWin().PixelToLogic(aPnt);
+        GetEditWin().UpdatePointer(aPnt);
+
+        SdrView* pDView = GetWrtShell().GetDrawView();
+        if ( bInitFormShell && pDView )
+            m_pFormShell->SetView(dynamic_cast<FmFormView*>( pDView) );
+
+    }
+    // Opportune time for the communication with OLE objects?
+    if ( GetDocShell()->GetDoc()->IsOLEPrtNotifyPending() )
+        GetDocShell()->GetDoc()->PrtOLENotify( false );
+
+    // now the table-update
+    if(bUpdateTable)
+        m_pWrtShell->UpdateTable();
+
+    GetViewImpl()->GetUNOObject_Impl()->NotifySelChanged();
+
+    m_bInitOnceCompleted = true;
+}
+
+// Interaction: AttrChangedNotify() and TimeoutHdl.
+// No Update if actions are still open, since the cursor on the core side
+// can be somewhere in no man's land.
+// But since we can no longer supply status and we want instead lock
+// the dispatcher.
+
+extern "C"
+{
+    static int lcl_CmpIds( const void *pFirst, const void *pSecond)
+    {
+        return *static_cast<sal_uInt16 const *>(pFirst) - *static_cast<sal_uInt16 const *>(pSecond);
+    }
+}
+
+IMPL_LINK_NOARG(SwView, AttrChangedNotify, LinkParamNone*, void)
+{
+    if ( GetEditWin().IsChainMode() )
+        GetEditWin().SetChainMode( false );
+
+    if (!m_pWrtShell || !GetDocShell())
+    {
+        return;
+    }
+
+    //Opt: Not if PaintLocked. During unlock a notify will be once more triggered.
+    if( !m_pWrtShell->IsPaintLocked() && !g_bNoInterrupt &&
+        GetDocShell()->IsReadOnly() )
+        CheckReadonlyState();
+
+    if( !m_pWrtShell->IsPaintLocked() && !g_bNoInterrupt )
+        CheckReadonlySelection();
+
+    if( !m_bAttrChgNotified )
+    {
+        if (m_pWrtShell->ActionPend() || g_bNoInterrupt ||
+             GetDispatcher().IsLocked() ||               //do not confuse the SFX
+             GetViewFrame()->GetBindings().IsInUpdate() )//do not confuse the SFX
+        {
+            m_bAttrChgNotified = true;
+            m_aTimer.Start();
+
+            const SfxBoolItem *pItem =
+                GetObjectShell()->GetMedium()->GetItemSet()->
+                                    GetItemIfSet( SID_HIDDEN, false );
+            if ( !pItem || !pItem->GetValue() )
+            {
+                GetViewFrame()->GetBindings().ENTERREGISTRATIONS();
+                m_bAttrChgNotifiedWithRegistrations = true;
+            }
+
+        }
+        else
+            SelectShell();
+
+    }
+
+    // change ui if cursor is at a SwPostItField
+    if (m_pPostItMgr)
+    {
+        // only perform the code that is needed to determine, if at the
+        // actual cursor position is a post-it field
+        m_pPostItMgr->SetShadowState( m_pWrtShell->GetPostItFieldAtCursor() );
+    }
+}
+
+IMPL_LINK_NOARG(SwView, TimeoutHdl, Timer *, void)
+{
+    if (m_pWrtShell->ActionPend() || g_bNoInterrupt)
+    {
+        m_aTimer.Start();
+        return;
+    }
+
+    if ( m_bAttrChgNotifiedWithRegistrations )
+    {
+        GetViewFrame()->GetBindings().LEAVEREGISTRATIONS();
+        m_bAttrChgNotifiedWithRegistrations = false;
+    }
+
+    CheckReadonlyState();
+    CheckReadonlySelection();
+
+    bool bOldUndo = m_pWrtShell->DoesUndo();
+    m_pWrtShell->DoUndo( false );
+    SelectShell();
+    m_pWrtShell->DoUndo( bOldUndo );
+    m_bAttrChgNotified = false;
+    GetViewImpl()->GetUNOObject_Impl()->NotifySelChanged();
+}
+
+void SwView::CheckReadonlyState()
+{
+    SfxDispatcher &rDis = GetDispatcher();
+    // To be able to recognize if it is already disabled!
+    SfxItemState eStateRO, eStateProtAll;
+    const SfxPoolItem *pItem;
+    // Query the status from a slot which is only known to us.
+    // Otherwise the slot is known from other; like the BasicIde
+    eStateRO = rDis.QueryState( FN_INSERT_BOOKMARK, pItem );
+    eStateProtAll = rDis.QueryState( FN_EDIT_REGION, pItem );
+    bool bChgd = false;
+
+    if ( !m_pWrtShell->IsCursorReadonly() )
+    {
+        static sal_uInt16 aROIds[] =
+        {
+            SID_DELETE,                 FN_BACKSPACE,               FN_SHIFT_BACKSPACE,
+            SID_UNDO,
+            SID_REDO,                   SID_REPEAT,                 SID_PASTE,
+            SID_PASTE_UNFORMATTED,      FN_PASTE_NESTED_TABLE,      FN_TABLE_PASTE_ROW_BEFORE,
+            FN_TABLE_PASTE_COL_BEFORE,  SID_PASTE_SPECIAL,          SID_SBA_BRW_INSERT,
+            SID_BACKGROUND_COLOR,       FN_INSERT_BOOKMARK,         SID_CHARMAP_CONTROL,
+            SID_CHARMAP,                SID_EMOJI_CONTROL,          FN_INSERT_SOFT_HYPHEN,
+            FN_INSERT_HARDHYPHEN,       FN_INSERT_HARD_SPACE,       FN_INSERT_NNBSP,
+            FN_INSERT_BREAK,            FN_INSERT_LINEBREAK,        FN_INSERT_COLUMN_BREAK,
+            FN_INSERT_BREAK_DLG,        FN_INSERT_CONTENT_CONTROL,  FN_INSERT_CHECKBOX_CONTENT_CONTROL,
+            FN_INSERT_DROPDOWN_CONTENT_CONTROL, FN_INSERT_PICTURE_CONTENT_CONTROL,
+            FN_INSERT_DATE_CONTENT_CONTROL,
+            FN_DELETE_SENT,             FN_DELETE_BACK_SENT,        FN_DELETE_WORD,
+            FN_DELETE_BACK_WORD,        FN_DELETE_LINE,             FN_DELETE_BACK_LINE,
+            FN_DELETE_PARA,             FN_DELETE_BACK_PARA,        FN_DELETE_WHOLE_LINE,
+            FN_CALCULATE,               FN_FORMAT_RESET,
+            FN_POSTIT,                  FN_JAVAEDIT,                SID_ATTR_PARA_ADJUST_LEFT,
+            SID_ATTR_PARA_ADJUST_RIGHT, SID_ATTR_PARA_ADJUST_CENTER,SID_ATTR_PARA_ADJUST_BLOCK,
+            SID_ATTR_PARA_LINESPACE_10, SID_ATTR_PARA_LINESPACE_15, SID_ATTR_PARA_LINESPACE_20,
+            SID_ATTR_CHAR_FONT,         SID_ATTR_CHAR_FONTHEIGHT,   SID_ATTR_CHAR_COLOR_BACKGROUND,
+            SID_ATTR_CHAR_COLOR_BACKGROUND_EXT,                     SID_ATTR_CHAR_COLOR_EXT,
+            SID_ATTR_CHAR_COLOR,        SID_ATTR_CHAR_WEIGHT,       SID_ATTR_CHAR_POSTURE,
+            SID_ATTR_CHAR_OVERLINE,
+            SID_ATTR_CHAR_UNDERLINE,    SID_ATTR_FLASH,             SID_ATTR_CHAR_STRIKEOUT,
+            SID_ULINE_VAL_SINGLE,       SID_ULINE_VAL_DOUBLE,       SID_ULINE_VAL_DOTTED,
+            SID_ATTR_CHAR_CONTOUR,      SID_ATTR_CHAR_SHADOWED,
+            SID_ATTR_CHAR_AUTOKERN,     SID_ATTR_CHAR_ESCAPEMENT,   FN_SET_SUPER_SCRIPT,
+            FN_SET_SUB_SCRIPT,          SID_ATTR_CHAR_CASEMAP,      SID_ATTR_CHAR_LANGUAGE,
+            SID_ATTR_CHAR_KERNING,      SID_CHAR_DLG,               SID_ATTR_CHAR_WORDLINEMODE,
+            FN_GROW_FONT_SIZE,          FN_SHRINK_FONT_SIZE,        FN_TXTATR_INET,
+            FN_FORMAT_DROPCAPS,         SID_ATTR_PARA_ADJUST,       SID_ATTR_PARA_LINESPACE,
+            SID_ATTR_PARA_SPLIT,        SID_ATTR_PARA_KEEP,         SID_ATTR_PARA_WIDOWS,
+            SID_ATTR_PARA_ORPHANS,
+            SID_ATTR_PARA_MODEL,        SID_PARA_DLG,
+            FN_SELECT_PARA,             SID_DEC_INDENT,
+            SID_INC_INDENT
+        };
+        static bool bFirst = true;
+        if ( bFirst )
+        {
+            qsort( static_cast<void*>(aROIds), SAL_N_ELEMENTS(aROIds), sizeof(sal_uInt16), lcl_CmpIds );
+            bFirst = false;
+        }
+        if ( SfxItemState::DISABLED == eStateRO )
+        {
+            rDis.SetSlotFilter( SfxSlotFilterState::ENABLED_READONLY, aROIds );
+            bChgd = true;
+        }
+    }
+    else if( m_pWrtShell->IsAllProtect() )
+    {
+        if ( SfxItemState::DISABLED == eStateProtAll )
+        {
+            static sal_uInt16 aAllProtIds[] = { SID_SAVEDOC, FN_EDIT_REGION };
+            static bool bAllProtFirst = true;
+            if ( bAllProtFirst )
+            {
+                qsort( static_cast<void*>(aAllProtIds), SAL_N_ELEMENTS(aAllProtIds), sizeof(sal_uInt16), lcl_CmpIds );
+                bAllProtFirst = false;
+            }
+            rDis.SetSlotFilter( SfxSlotFilterState::ENABLED_READONLY, aAllProtIds );
+            bChgd = true;
+        }
+    }
+    else if ( SfxItemState::DISABLED != eStateRO ||
+                SfxItemState::DISABLED != eStateProtAll )
+    {
+        bChgd = true;
+        rDis.SetSlotFilter();
+    }
+    if ( bChgd )
+        GetViewFrame()->GetBindings().InvalidateAll(true);
+}
+
+void SwView::CheckReadonlySelection()
+{
+    SfxDisableFlags nDisableFlags = SfxDisableFlags::NONE;
+    SfxDispatcher &rDis = GetDispatcher();
+
+    if( m_pWrtShell->HasReadonlySel() &&
+        ( !m_pWrtShell->GetDrawView() ||
+            !m_pWrtShell->GetDrawView()->GetMarkedObjectList().GetMarkCount() ))
+        nDisableFlags |= SfxDisableFlags::SwOnProtectedCursor;
+
+    if( (SfxDisableFlags::SwOnProtectedCursor & nDisableFlags ) !=
+        (SfxDisableFlags::SwOnProtectedCursor & rDis.GetDisableFlags() ) )
+    {
+        // Additionally move at the Window the InputContext, so that
+        // in japanese / chinese versions the external input will be
+        // turned on or off. This but only if the correct shell is on
+        // the stack.
+        switch( m_pViewImpl->GetShellMode() )
+        {
+        case ShellMode::Text:
+        case ShellMode::ListText:
+        case ShellMode::TableText:
+        case ShellMode::TableListText:
+            {
+// Temporary solution!!! Should set the font of the current insertion point
+//         at each cursor movement, so outside of this "if". But TH does not
+//         evaluates the font at this time and the "purchase" appears to me
+//         as too expensive.
+//         Moreover, we don't have a font, but only attributes from which the
+//         text formatting and the correct font will be build together.
+
+                InputContext aCntxt( GetEditWin().GetInputContext() );
+                aCntxt.SetOptions( SfxDisableFlags::SwOnProtectedCursor & nDisableFlags
+                                    ? (aCntxt.GetOptions() & ~
+                                            InputContextFlags( InputContextFlags::Text |
+                                                InputContextFlags::ExtText ))
+                                    : (aCntxt.GetOptions() |
+                                            ( InputContextFlags::Text |
+                                                InputContextFlags::ExtText )) );
+                GetEditWin().SetInputContext( aCntxt );
+            }
+            break;
+        default:
+            ;
+        }
+
+    }
+
+    if( nDisableFlags != rDis.GetDisableFlags() )
+    {
+        rDis.SetDisableFlags( nDisableFlags );
+        GetViewFrame()->GetBindings().InvalidateAll( true );
+    }
+}
+
+SwView::SwView( SfxViewFrame *_pFrame, SfxViewShell* pOldSh )
+    : SfxViewShell( _pFrame, SWVIEWFLAGS ),
+    m_aTimer( "sw::SwView m_aTimer" ),
+    m_nNewPage(USHRT_MAX),
+    m_nOldPageNum(0),
+    m_pNumRuleNodeFromDoc(nullptr),
+    m_pEditWin( VclPtr<SwEditWin>::Create( &_pFrame->GetWindow(), *this ) ),
+    m_pShell(nullptr),
+    m_pFormShell(nullptr),
+    m_pHScrollbar(nullptr),
+    m_pVScrollbar(nullptr),
+    m_pScrollFill(VclPtr<ScrollBarBox>::Create( &_pFrame->GetWindow(), WB_SIZEABLE )),
+    m_pVRuler(VclPtr<SvxRuler>::Create(&GetViewFrame()->GetWindow(), m_pEditWin,
+                            SvxRulerSupportFlags::TABS | SvxRulerSupportFlags::PARAGRAPH_MARGINS_VERTICAL|
+                                SvxRulerSupportFlags::BORDERS | SvxRulerSupportFlags::REDUCED_METRIC,
+                            GetViewFrame()->GetBindings(),
+                            WB_VSCROLL |  WB_EXTRAFIELD | WB_BORDER )),
+    m_pLastTableFormat(nullptr),
+    m_pLastFlyFormat(nullptr),
+    m_pFormatClipboard(new SwFormatClipboard()),
+    m_nSelectionType( SelectionType::All ),
+    m_nPageCnt(0),
+    m_nDrawSfxId( USHRT_MAX ),
+    m_nFormSfxId( USHRT_MAX ),
+    m_eFormObjKind(SdrObjKind::NONE),
+    m_nLastPasteDestination( static_cast<SotExchangeDest>(0xFFFF) ),
+    m_nLeftBorderDistance( 0 ),
+    m_nRightBorderDistance( 0 ),
+    m_eLastSearchCommand( static_cast<SvxSearchCmd>(0xFFFF) ),
+    m_bWheelScrollInProgress(false),
+    m_bCenterCursor(false),
+    m_bTopCursor(false),
+    m_bTabColFromDoc(false),
+    m_bTabRowFromDoc(false),
+    m_bSetTabColFromDoc(false),
+    m_bSetTabRowFromDoc(false),
+    m_bAttrChgNotified(false),
+    m_bAttrChgNotifiedWithRegistrations(false),
+    m_bVerbsActive(false),
+    m_bDrawRotate(false),
+    m_bDrawSelMode(true),
+    m_bShowAtResize(true),
+    m_bInOuterResizePixel(false),
+    m_bInInnerResizePixel(false),
+    m_bPasteState(false),
+    m_bPasteSpecialState(false),
+    m_bInMailMerge(false),
+    m_bInDtor(false),
+    m_bOldShellWasPagePreview(false),
+    m_bIsPreviewDoubleClick(false),
+    m_bMakeSelectionVisible(false),
+    m_bForceChangesToolbar(true),
+    m_nLOKPageUpDownOffset(0)
+{
+    static bool bRequestDoubleBuffering = getenv("VCL_DOUBLEBUFFERING_ENABLE");
+    if (bRequestDoubleBuffering)
+        m_pEditWin->RequestDoubleBuffering(true);
+
+    // According to discussion with MBA and further
+    // investigations, no old SfxViewShell will be set as parameter <pOldSh>,
+    // if function "New Window" is performed to open an additional view beside
+    // an already existing one.
+    // If the view is switch from one to another, the 'old' view is given by
+    // parameter <pOldSh>.
+
+    bDocSzUpdated = true;
+
+    CreateScrollbar( true );
+    CreateScrollbar( false );
+
+    m_pViewImpl.reset(new SwView_Impl(this));
+    SetName("View");
+    SetWindow( m_pEditWin );
+
+    m_aTimer.SetTimeout( 120 );
+
+    SwDocShell& rDocSh = dynamic_cast<SwDocShell&>(*_pFrame->GetObjectShell());
+    bool bOldModifyFlag = rDocSh.IsEnableSetModified();
+    if (bOldModifyFlag)
+        rDocSh.EnableSetModified( false );
+    // HACK: SwDocShell has some cached font info, VCL informs about font updates,
+    // but loading of docs with embedded fonts happens after SwDocShell is created
+    // but before SwEditWin (which handles the VCL event) is created. So update
+    // manually.
+    if (rDocSh.GetDoc()->getIDocumentSettingAccess().get( DocumentSettingId::EMBED_FONTS ))
+        rDocSh.UpdateFontList();
+    bool bWebDShell = dynamic_cast<const SwWebDocShell*>(&rDocSh) !=  nullptr;
+
+    const SwMasterUsrPref *pUsrPref = SW_MOD()->GetUsrPref(bWebDShell);
+    SwViewOption aUsrPref( *pUsrPref);
+
+    //! get lingu options without loading lingu DLL
+    SvtLinguOptions aLinguOpt;
+    SvtLinguConfig().GetOptions( aLinguOpt );
+    aUsrPref.SetOnlineSpell( aLinguOpt.bIsSpellAuto );
+
+    bool bOldShellWasSrcView = false;
+
+    // determine if there is an existing view for
+    // document
+    SfxViewShell* pExistingSh = nullptr;
+    if ( pOldSh )
+    {
+        pExistingSh = pOldSh;
+        // determine type of existing view
+        if (SwPagePreview* pPagePreview = dynamic_cast<SwPagePreview *>(pExistingSh))
+        {
+            m_sSwViewData = pPagePreview->GetPrevSwViewData();
+            m_sNewCursorPos = pPagePreview->GetNewCursorPos();
+            m_nNewPage = pPagePreview->GetNewPage();
+            m_bOldShellWasPagePreview = true;
+            m_bIsPreviewDoubleClick = !m_sNewCursorPos.isEmpty() || m_nNewPage != USHRT_MAX;
+        }
+        else if (dynamic_cast<const SwSrcView *>(pExistingSh) != nullptr)
+            bOldShellWasSrcView = true;
+    }
+
+    SAL_INFO( "sw.ui", "before create WrtShell" );
+    if (SwView *pView = dynamic_cast<SwView*>(pExistingSh))
+    {
+        m_pWrtShell.reset(new SwWrtShell(*pView->m_pWrtShell, m_pEditWin, *this));
+    }
+    else if (SwWrtShell *pWrtShell = dynamic_cast<SwWrtShell*>(rDocSh.GetDoc()->getIDocumentLayoutAccess().GetCurrentViewShell()))
+    {
+        m_pWrtShell.reset(new SwWrtShell(*pWrtShell, m_pEditWin, *this));
+    }
+    else
+    {
+        SwDoc& rDoc = *rDocSh.GetDoc();
+
+        if( !bOldShellWasSrcView && bWebDShell && !m_bOldShellWasPagePreview )
+            aUsrPref.setBrowseMode( true );
+        else
+            aUsrPref.setBrowseMode( rDoc.getIDocumentSettingAccess().get(DocumentSettingId::BROWSE_MODE) );
+
+        //For the BrowseMode we do not assume a factor.
+        if( aUsrPref.getBrowseMode() && aUsrPref.GetZoomType() != SvxZoomType::PERCENT )
+        {
+            aUsrPref.SetZoomType( SvxZoomType::PERCENT );
+            aUsrPref.SetZoom( 100 );
+        }
+        if (rDocSh.IsPreview())
+        {
+            aUsrPref.SetZoomType( SvxZoomType::WHOLEPAGE );
+            aUsrPref.SetViewLayoutBookMode( false );
+            aUsrPref.SetViewLayoutColumns( 1 );
+        }
+        m_pWrtShell.reset(new SwWrtShell(rDoc, m_pEditWin, *this, &aUsrPref));
+        // creating an SwView from a SwPagePreview needs to
+        // add the SwViewShell to the ring of the other SwViewShell(s)
+        if(m_bOldShellWasPagePreview)
+        {
+            SwViewShell& rPreviewViewShell = *static_cast<SwPagePreview*>(pExistingSh)->GetViewShell();
+            m_pWrtShell->MoveTo(&rPreviewViewShell);
+            // to update the field command et.al. if necessary
+            const SwViewOption* pPreviewOpt = rPreviewViewShell.GetViewOptions();
+            if( pPreviewOpt->IsFieldName() != aUsrPref.IsFieldName() ||
+                    pPreviewOpt->IsShowHiddenField() != aUsrPref.IsShowHiddenField() ||
+                    pPreviewOpt->IsShowHiddenPara() != aUsrPref.IsShowHiddenPara() ||
+                    pPreviewOpt->IsShowHiddenChar() != aUsrPref.IsShowHiddenChar() )
+                rPreviewViewShell.ApplyViewOptions(aUsrPref);
+            // reset design mode at draw view for form
+            // shell, if needed.
+            if ( static_cast<SwPagePreview*>(pExistingSh)->ResetFormDesignMode() &&
+                 m_pWrtShell->HasDrawView() )
+            {
+                SdrView* pDrawView = m_pWrtShell->GetDrawView();
+                pDrawView->SetDesignMode( static_cast<SwPagePreview*>(pExistingSh)->FormDesignModeToReset() );
+            }
+        }
+    }
+    SAL_INFO( "sw.ui", "after create WrtShell" );
+    m_pHRuler = VclPtr<SwCommentRuler>::Create(m_pWrtShell.get(), &GetViewFrame()->GetWindow(), m_pEditWin,
+                SvxRulerSupportFlags::TABS |
+                SvxRulerSupportFlags::PARAGRAPH_MARGINS |
+                SvxRulerSupportFlags::BORDERS |
+                SvxRulerSupportFlags::NEGATIVE_MARGINS|
+                SvxRulerSupportFlags::REDUCED_METRIC,
+                GetViewFrame()->GetBindings(),
+                WB_STDRULER | WB_EXTRAFIELD | WB_BORDER);
+
+    // assure that modified state of document
+    // isn't reset, if document is already modified.
+    const bool bIsDocModified = m_pWrtShell->GetDoc()->getIDocumentState().IsModified();
+
+    // Thus among other things, the HRuler is not displayed in the read-only case.
+    aUsrPref.SetReadonly( m_pWrtShell->GetViewOptions()->IsReadonly() );
+
+    // no margin for OLE!
+    Size aBrwsBorder;
+    if( SfxObjectCreateMode::EMBEDDED != rDocSh.GetCreateMode() )
+        aBrwsBorder = GetMargin();
+
+    m_pWrtShell->SetBrowseBorder( aBrwsBorder );
+
+    // In CTOR no shell changes may take place, which must be temporarily stored
+    // with the timer. Otherwise, the SFX removes them from the stack!
+    bool bOld = g_bNoInterrupt;
+    g_bNoInterrupt = true;
+
+    m_pHRuler->SetActive();
+    m_pVRuler->SetActive();
+
+    SfxViewFrame* pViewFrame = GetViewFrame();
+
+    StartListening(*pViewFrame, DuplicateHandling::Prevent);
+    StartListening(rDocSh, DuplicateHandling::Prevent);
+
+    // Set Zoom-factor from HRuler
+    Fraction aZoomFract( aUsrPref.GetZoom(), 100 );
+    m_pHRuler->SetZoom( aZoomFract );
+    m_pVRuler->SetZoom( aZoomFract );
+    m_pHRuler->SetDoubleClickHdl(LINK( this, SwView, ExecRulerClick ));
+    FieldUnit eMetric = pUsrPref->GetHScrollMetric();
+    m_pHRuler->SetUnit( eMetric );
+
+    eMetric = pUsrPref->GetVScrollMetric();
+    m_pVRuler->SetUnit( eMetric );
+
+    m_pHRuler->SetCharWidth( 371 );  // default character width
+    m_pVRuler->SetLineHeight( 551 );  // default line height
+
+    // Set DocShell
+    m_xGlueDocShell.reset(new SwViewGlueDocShell(*this, rDocSh));
+    m_pPostItMgr.reset(new SwPostItMgr(this));
+
+    // Check and process the DocSize. Via the handler, the shell could not
+    // be found, because the shell is not known in the SFX management
+    // within the CTOR phase.
+    DocSzChgd( m_pWrtShell->GetDocSize() );
+
+        // Set AttrChangedNotify link
+    m_pWrtShell->SetChgLnk(LINK(this, SwView, AttrChangedNotify));
+
+    if (rDocSh.GetCreateMode() == SfxObjectCreateMode::EMBEDDED &&
+        !rDocSh.GetVisArea(ASPECT_CONTENT).IsEmpty())
+        SetVisArea(rDocSh.GetVisArea(ASPECT_CONTENT),false);
+
+    SAL_WARN_IF(
+        officecfg::Office::Common::Undo::Steps::get() <= 0,
+        "sw.ui", "/org.openoffice.Office.Common/Undo/Steps <= 0");
+    if (!utl::ConfigManager::IsFuzzing() && 0 < officecfg::Office::Common::Undo::Steps::get())
+    {
+        m_pWrtShell->DoUndo();
+    }
+
+    const bool bBrowse = m_pWrtShell->GetViewOptions()->getBrowseMode();
+    // Disable "multiple window"
+    SetNewWindowAllowed(!bBrowse);
+    // End of disabled multiple window
+
+    m_bVScrollbarEnabled = aUsrPref.IsViewVScrollBar();
+    m_bHScrollbarEnabled = aUsrPref.IsViewHScrollBar();
+    m_pHScrollbar->SetAuto(bBrowse);
+    if( aUsrPref.IsViewHRuler() )
+        CreateTab();
+    if( aUsrPref.IsViewVRuler() )
+        CreateVRuler();
+
+    m_pWrtShell->SetUIOptions( aUsrPref );
+    m_pWrtShell->SetReadOnlyAvailable( aUsrPref.IsCursorInProtectedArea() );
+#if !ENABLE_WASM_STRIP_ACCESSIBILITY
+    m_pWrtShell->ApplyAccessibilityOptions(SW_MOD()->GetAccessibilityOptions());
+#endif
+
+    if( m_pWrtShell->GetDoc()->getIDocumentState().IsUpdateExpField() )
+    {
+        if (m_pWrtShell->GetDoc()->GetDocumentFieldsManager().containsUpdatableFields())
+        {
+            CurrShell aCurr(m_pWrtShell.get());
+            m_pWrtShell->StartAction();
+            m_pWrtShell->CalcLayout();
+            m_pWrtShell->GetDoc()->getIDocumentFieldsAccess().UpdateFields(false);
+            m_pWrtShell->EndAction();
+        }
+        m_pWrtShell->GetDoc()->getIDocumentState().SetUpdateExpFieldStat( false );
+    }
+
+    // Update all tables if necessary:
+    if( m_pWrtShell->GetDoc()->IsUpdateTOX() )
+    {
+        SfxRequest aSfxRequest( FN_UPDATE_TOX, SfxCallMode::SLOT, GetPool() );
+        Execute( aSfxRequest );
+        m_pWrtShell->GetDoc()->SetUpdateTOX( false );     // reset again
+        m_pWrtShell->SttEndDoc(true);
+    }
+
+    // No ResetModified, if there is already a view to this doc.
+    SfxViewFrame* pVFrame = GetViewFrame();
+    SfxViewFrame* pFirst = SfxViewFrame::GetFirst(&rDocSh);
+    // Currently(360) the view is registered firstly after the CTOR,
+    // the following expression is also working if this changes.
+    // If the modification cannot be canceled by undo, then do NOT set
+    // the modify back.
+    // no reset of modified state, if document
+    // was already modified.
+    if (!m_pWrtShell->GetDoc()->GetIDocumentUndoRedo().IsUndoNoResetModified() &&
+         ( !pFirst || pFirst == pVFrame ) &&
+         !bIsDocModified )
+    {
+        m_pWrtShell->ResetModified();
+    }
+
+    g_bNoInterrupt = bOld;
+
+    // If a new GlobalDoc will be created, the navigator will also be generated.
+    if( dynamic_cast<const SwGlobalDocShell*>(&rDocSh) != nullptr &&
+        !pVFrame->GetChildWindow( SID_NAVIGATOR ))
+    {
+        SfxBoolItem aNavi(SID_NAVIGATOR, true);
+        GetDispatcher().ExecuteList(SID_NAVIGATOR, SfxCallMode::ASYNCHRON, { &aNavi });
+    }
+
+    uno::Reference< frame::XFrame >  xFrame = pVFrame->GetFrame().GetFrameInterface();
+
+    uno::Reference< frame::XFrame >  xBeamerFrame = xFrame->findFrame(
+            "_beamer", frame::FrameSearchFlag::CHILDREN);
+    if(xBeamerFrame.is())
+    {
+        SwDBData aData = m_pWrtShell->GetDBData();
+        SwModule::ShowDBObj( *this, aData );
+    }
+
+    // has anybody calls the attrchanged handler in the constructor?
+    if( m_bAttrChgNotifiedWithRegistrations )
+    {
+        GetViewFrame()->GetBindings().LEAVEREGISTRATIONS();
+        if( m_aTimer.IsActive() )
+            m_aTimer.Stop();
+    }
+
+    m_aTimer.SetInvokeHandler(LINK(this, SwView, TimeoutHdl));
+    m_bAttrChgNotified = m_bAttrChgNotifiedWithRegistrations = false;
+    if (bOldModifyFlag)
+        rDocSh.EnableSetModified();
+    InvalidateBorder();
+
+    if( !m_pHScrollbar->IsVisible( true ) )
+        ShowHScrollbar( false );
+    if( !m_pVScrollbar->IsVisible( true ) )
+        ShowVScrollbar( false );
+
+    if (m_pWrtShell && m_pWrtShell->GetViewOptions()->IsShowOutlineContentVisibilityButton())
+        m_pWrtShell->InvalidateOutlineContentVisibility();
+
+    GetViewFrame()->GetWindow().AddChildEventListener( LINK( this, SwView, WindowChildEventListener ) );
+}
+
+SwViewGlueDocShell::SwViewGlueDocShell(SwView& rView, SwDocShell& rDocSh)
+    : m_rView(rView)
+{
+    // Set DocShell
+    rDocSh.SetView(&m_rView);
+    SW_MOD()->SetView(&m_rView);
+}
+
+SwViewGlueDocShell::~SwViewGlueDocShell()
+{
+    SwDocShell* pDocSh = m_rView.GetDocShell();
+    if (pDocSh && pDocSh->GetView() == &m_rView)
+        pDocSh->SetView(nullptr);
+    if (SW_MOD()->GetView() == &m_rView)
+        SW_MOD()->SetView(nullptr);
+}
+
+SwView::~SwView()
+{
+    // Notify other LOK views that we are going away.
+    SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_VIEW_CURSOR_VISIBLE, "visible", "false");
+    SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_TEXT_VIEW_SELECTION, "selection", "");
+    SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_GRAPHIC_VIEW_SELECTION, "selection", "EMPTY");
+
+    // Need to remove activated field's button before disposing EditWin.
+    GetWrtShell().getIDocumentMarkAccess()->ClearFieldActivation();
+
+    GetViewFrame()->GetWindow().RemoveChildEventListener( LINK( this, SwView, WindowChildEventListener ) );
+    m_pPostItMgr.reset();
+
+    m_bInDtor = true;
+    m_pEditWin->Hide(); // prevent problems with painting
+
+    // Set pointer in SwDocShell to the view again
+    m_xGlueDocShell.reset();
+
+    if( m_aTimer.IsActive() && m_bAttrChgNotifiedWithRegistrations )
+        GetViewFrame()->GetBindings().LEAVEREGISTRATIONS();
+
+    // the last view must end the text edit
+    SdrView *pSdrView = m_pWrtShell ? m_pWrtShell->GetDrawView() : nullptr;
+    if( pSdrView && pSdrView->IsTextEdit() )
+        pSdrView->SdrEndTextEdit( true );
+    else if (pSdrView)
+    {
+        pSdrView->DisposeUndoManager();
+    }
+
+    SetWindow( nullptr );
+
+    m_pViewImpl->Invalidate();
+    EndListening(*GetViewFrame());
+    EndListening(*GetDocShell());
+    m_pScrollFill.disposeAndClear();
+    m_pWrtShell.reset(); // reset here so that it is not accessible by the following dtors.
+    m_pHScrollbar.disposeAndClear();
+    m_pVScrollbar.disposeAndClear();
+    m_pHRuler.disposeAndClear();
+    m_pVRuler.disposeAndClear();
+    m_pGlosHdl.reset();
+    m_pViewImpl.reset();
+
+    // If this was enabled in the ctor for the frame, then disable it here.
+    static bool bRequestDoubleBuffering = getenv("VCL_DOUBLEBUFFERING_ENABLE");
+    if (bRequestDoubleBuffering)
+        m_pEditWin->RequestDoubleBuffering(false);
+    m_pEditWin.disposeAndClear();
+
+    m_pFormatClipboard.reset();
+}
+
+SwDocShell* SwView::GetDocShell()
+{
+    SfxObjectShell* pDocShell = GetViewFrame()->GetObjectShell();
+    return dynamic_cast<SwDocShell*>( pDocShell );
+}
+
+// Remember CursorPos
+
+void SwView::WriteUserData( OUString &rUserData, bool bBrowse )
+{
+    // The browse flag will be passed from Sfx when documents are browsed
+    // (not to be confused with the BrowseMode).
+    // Then that stored data are not persistent!
+
+    const SwRect& rRect = m_pWrtShell->GetCharRect();
+    const tools::Rectangle& rVis = GetVisArea();
+
+    rUserData = OUString::number( rRect.Left() );
+    rUserData += ";";
+    rUserData += OUString::number( rRect.Top() );
+    rUserData += ";";
+    rUserData += OUString::number( m_pWrtShell->GetViewOptions()->GetZoom() );
+    rUserData += ";";
+    rUserData += OUString::number( rVis.Left() );
+    rUserData += ";";
+    rUserData += OUString::number( rVis.Top() );
+    rUserData += ";";
+    rUserData += OUString::number( bBrowse ? SAL_MIN_INT32 : rVis.Right());
+    rUserData += ";";
+    rUserData += OUString::number( bBrowse ? SAL_MIN_INT32 : rVis.Bottom());
+    rUserData += ";";
+    rUserData += OUString::number(
+            static_cast<sal_uInt16>(m_pWrtShell->GetViewOptions()->GetZoomType()));//eZoom;
+    rUserData += ";";
+    rUserData += FrameTypeFlags::NONE == m_pWrtShell->GetSelFrameType() ? std::u16string_view(u"0") : std::u16string_view(u"1");
+}
+
+// Set CursorPos
+
+static bool lcl_IsOwnDocument( SwView& rView )
+{
+    uno::Reference<document::XDocumentPropertiesSupplier> xDPS(
+        rView.GetDocShell()->GetModel(), uno::UNO_QUERY_THROW);
+    uno::Reference<document::XDocumentProperties> xDocProps
+        = xDPS->getDocumentProperties();
+    OUString Created = xDocProps->getAuthor();
+    OUString Changed = xDocProps->getModifiedBy();
+    OUString FullName = SW_MOD()->GetUserOptions().GetFullName();
+    return !FullName.isEmpty()
+           && (Changed == FullName || (Changed.isEmpty() && Created == FullName));
+}
+
+void SwView::ReadUserData( const OUString &rUserData, bool bBrowse )
+{
+    if ( !(rUserData.indexOf(';')>=0 && // more than one token
+        // For document without layout only in the onlinelayout or
+        // while forward/backward
+         (!m_pWrtShell->IsNewLayout() || m_pWrtShell->GetViewOptions()->getBrowseMode() || bBrowse)) )
+        return;
+
+    bool bIsOwnDocument = lcl_IsOwnDocument( *this );
+
+    CurrShell aCurr(m_pWrtShell.get());
+
+    sal_Int32 nPos = 0;
+
+    // No it is *not* a good idea to call GetToken within Point constr. immediately,
+    // because which parameter is evaluated first?
+    tools::Long nX = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )),
+         nY = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos ));
+    Point aCursorPos( nX, nY );
+
+    sal_uInt16 nZoomFactor =
+        static_cast< sal_uInt16 >( o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )) );
+
+    tools::Long nLeft  = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )),
+         nTop   = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )),
+         nRight = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )),
+         nBottom= o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos ));
+
+    const tools::Long nAdd = m_pWrtShell->GetViewOptions()->getBrowseMode() ? DOCUMENTBORDER : DOCUMENTBORDER*2;
+    if ( nBottom > (m_pWrtShell->GetDocSize().Height()+nAdd) )
+        return;
+
+    m_pWrtShell->EnableSmooth( false );
+
+    const tools::Rectangle aVis( nLeft, nTop, nRight, nBottom );
+
+    sal_Int32 nOff = 0;
+    SvxZoomType eZoom;
+    if( !m_pWrtShell->GetViewOptions()->getBrowseMode() )
+        eZoom = static_cast<SvxZoomType>(o3tl::narrowing<sal_uInt16>(o3tl::toInt32(o3tl::getToken(rUserData, nOff, ';', nPos ))));
+    else
+    {
+        eZoom = SvxZoomType::PERCENT;
+        ++nOff;
+    }
+
+    bool bSelectObj = (0 != o3tl::toInt32(o3tl::getToken(rUserData, nOff, ';', nPos )))
+                        && m_pWrtShell->IsObjSelectable( aCursorPos );
+
+    // restore editing position
+    m_pViewImpl->SetRestorePosition(aCursorPos, bSelectObj);
+    // set flag value to avoid macro execution.
+    bool bSavedFlagValue = m_pWrtShell->IsMacroExecAllowed();
+    m_pWrtShell->SetMacroExecAllowed( false );
+// os: changed: The user data has to be read if the view is switched back from page preview
+// go to the last editing position when opening own files
+    if(m_bOldShellWasPagePreview || bIsOwnDocument)
+    {
+        m_pWrtShell->SwCursorShell::SetCursor( aCursorPos, !bSelectObj );
+        if( bSelectObj )
+        {
+            m_pWrtShell->SelectObj( aCursorPos );
+            m_pWrtShell->EnterSelFrameMode( &aCursorPos );
+        }
+    }
+
+    // reset flag value
+    m_pWrtShell->SetMacroExecAllowed( bSavedFlagValue );
+
+    // set visible area before applying
+    // information from print preview. Otherwise, the applied information
+    // is lost.
+// os: changed: The user data has to be read if the view is switched back from page preview
+// go to the last editing position when opening own files
+    if(m_bOldShellWasPagePreview || bIsOwnDocument )
+    {
+        if ( bBrowse )
+            SetVisArea( aVis.TopLeft() );
+        else
+            SetVisArea( aVis );
+    }
+
+    //apply information from print preview - if available
+    if( !m_sNewCursorPos.isEmpty() )
+    {
+        sal_Int32 nIdx{ 0 };
+        const tools::Long nXTmp = o3tl::toInt32(o3tl::getToken(m_sNewCursorPos, 0, ';', nIdx ));
+        const tools::Long nYTmp = o3tl::toInt32(o3tl::getToken(m_sNewCursorPos, 0, ';', nIdx ));
+        Point aCursorPos2( nXTmp, nYTmp );
+        bSelectObj = m_pWrtShell->IsObjSelectable( aCursorPos2 );
+
+        m_pWrtShell->SwCursorShell::SetCursor( aCursorPos2 );
+        if( bSelectObj )
+        {
+            m_pWrtShell->SelectObj( aCursorPos2 );
+            m_pWrtShell->EnterSelFrameMode( &aCursorPos2 );
+        }
+        m_pWrtShell->MakeSelVisible();
+        m_sNewCursorPos.clear();
+    }
+    else if(USHRT_MAX != m_nNewPage)
+    {
+        m_pWrtShell->GotoPage(m_nNewPage, true);
+        m_nNewPage = USHRT_MAX;
+    }
+
+    SelectShell();
+
+    m_pWrtShell->StartAction();
+    const SwViewOption* pVOpt = m_pWrtShell->GetViewOptions();
+    if( pVOpt->GetZoom() != nZoomFactor || pVOpt->GetZoomType() != eZoom )
+        SetZoom( eZoom, nZoomFactor);
+
+    m_pWrtShell->LockView( true );
+    m_pWrtShell->EndAction();
+    m_pWrtShell->LockView( false );
+    m_pWrtShell->EnableSmooth( true );
+}
+
+void SwView::ReadUserDataSequence ( const uno::Sequence < beans::PropertyValue >& rSequence )
+{
+    if(GetDocShell()->IsPreview()||m_bIsPreviewDoubleClick)
+        return;
+    bool bIsOwnDocument = lcl_IsOwnDocument( *this );
+
+    CurrShell aCurr(m_pWrtShell.get());
+    const SwRect& rRect = m_pWrtShell->GetCharRect();
+    const tools::Rectangle &rVis = GetVisArea();
+    const SwViewOption* pVOpt = m_pWrtShell->GetViewOptions();
+
+    sal_Int64 nX = rRect.Left(), nY = rRect.Top(), nLeft = rVis.Left(), nTop = rVis.Top();
+    sal_Int64 nRight = nLeft;
+    sal_Int64 nBottom = LONG_MIN;
+    sal_Int16 nZoomType = static_cast< sal_Int16 >(pVOpt->GetZoomType());
+    sal_Int16 nZoomFactor = static_cast < sal_Int16 > (pVOpt->GetZoom());
+    bool bViewLayoutBookMode = pVOpt->IsViewLayoutBookMode();
+    sal_Int16 nViewLayoutColumns = pVOpt->GetViewLayoutColumns();
+
+    bool bSelectedFrame = ( m_pWrtShell->GetSelFrameType() != FrameTypeFlags::NONE ),
+             bGotVisibleLeft = false,
+             bGotVisibleTop = false, bGotVisibleRight = false,
+             bGotVisibleBottom = false, bGotZoomType = false,
+             bGotZoomFactor = false, bGotIsSelectedFrame = false,
+             bGotViewLayoutColumns = false, bGotViewLayoutBookMode = false,
+             bBrowseMode = false, bGotBrowseMode = false;
+    bool bKeepRatio = pVOpt->IsKeepRatio();
+    bool bGotKeepRatio = false;
+
+    for (const beans::PropertyValue& rValue : rSequence)
+    {
+        if ( rValue.Name == "ViewLeft" )
+        {
+           rValue.Value >>= nX;
+           nX = o3tl::toTwips(nX, o3tl::Length::mm100);
+        }
+        else if ( rValue.Name == "ViewTop" )
+        {
+           rValue.Value >>= nY;
+           nY = o3tl::toTwips(nY, o3tl::Length::mm100);
+        }
+        else if ( rValue.Name == "VisibleLeft" )
+        {
+           rValue.Value >>= nLeft;
+           nLeft = o3tl::toTwips(nLeft, o3tl::Length::mm100);
+           bGotVisibleLeft = true;
+        }
+        else if ( rValue.Name == "VisibleTop" )
+        {
+           rValue.Value >>= nTop;
+           nTop = o3tl::toTwips(nTop, o3tl::Length::mm100);
+           bGotVisibleTop = true;
+        }
+        else if ( rValue.Name == "VisibleRight" )
+        {
+           rValue.Value >>= nRight;
+           nRight = o3tl::toTwips(nRight, o3tl::Length::mm100);
+           bGotVisibleRight = true;
+        }
+        else if ( rValue.Name == "VisibleBottom" )
+        {
+           rValue.Value >>= nBottom;
+           nBottom = o3tl::toTwips(nBottom, o3tl::Length::mm100);
+           bGotVisibleBottom = true;
+        }
+        else if ( rValue.Name == "ZoomType" )
+        {
+           rValue.Value >>= nZoomType;
+           bGotZoomType = true;
+        }
+        else if ( rValue.Name == "ZoomFactor" )
+        {
+           rValue.Value >>= nZoomFactor;
+           bGotZoomFactor = true;
+        }
+        else if ( rValue.Name == "ViewLayoutColumns" )
+        {
+           rValue.Value >>= nViewLayoutColumns;
+           bGotViewLayoutColumns = true;
+        }
+        else if ( rValue.Name == "ViewLayoutBookMode" )
+        {
+           bViewLayoutBookMode = *o3tl::doAccess<bool>(rValue.Value);
+           bGotViewLayoutBookMode = true;
+        }
+        else if ( rValue.Name == "IsSelectedFrame" )
+        {
+           rValue.Value >>= bSelectedFrame;
+           bGotIsSelectedFrame = true;
+        }
+        else if (rValue.Name == "ShowOnlineLayout")
+        {
+           rValue.Value >>= bBrowseMode;
+           bGotBrowseMode = true;
+        }
+        else if (rValue.Name == "KeepRatio")
+        {
+            rValue.Value >>= bKeepRatio;
+            bGotKeepRatio = true;
+        }
+        // Fallback to common SdrModel processing
+        else
+           GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel()->ReadUserDataSequenceValue(&rValue);
+    }
+    if (bGotBrowseMode)
+    {
+        // delegate further
+        GetViewImpl()->GetUNOObject_Impl()->getViewSettings()->setPropertyValue("ShowOnlineLayout", uno::Any(bBrowseMode));
+    }
+
+    SelectShell();
+
+    if (!bGotVisibleBottom)
+        return;
+
+    Point aCursorPos( nX, nY );
+    const tools::Long nAdd = m_pWrtShell->GetViewOptions()->getBrowseMode() ? DOCUMENTBORDER : DOCUMENTBORDER*2;
+    if (nBottom > (m_pWrtShell->GetDocSize().Height()+nAdd) )
+        return;
+
+    m_pWrtShell->EnableSmooth( false );
+    const tools::Rectangle aVis( nLeft, nTop, nRight, nBottom );
+
+    SvxZoomType eZoom;
+    if ( !m_pWrtShell->GetViewOptions()->getBrowseMode() )
+        eZoom = static_cast < SvxZoomType > ( nZoomType );
+    else
+    {
+        eZoom = SvxZoomType::PERCENT;
+    }
+    if (bGotIsSelectedFrame)
+    {
+        bool bSelectObj = bSelectedFrame && m_pWrtShell->IsObjSelectable( aCursorPos );
+
+        // set flag value to avoid macro execution.
+        bool bSavedFlagValue = m_pWrtShell->IsMacroExecAllowed();
+        m_pWrtShell->SetMacroExecAllowed( false );
+// os: changed: The user data has to be read if the view is switched back from page preview
+// go to the last editing position when opening own files
+        m_pViewImpl->SetRestorePosition(aCursorPos, bSelectObj);
+        if(m_bOldShellWasPagePreview|| bIsOwnDocument)
+        {
+            m_pWrtShell->SwCursorShell::SetCursor( aCursorPos, !bSelectObj );
+
+            // Update the shell to toggle Header/Footer edit if needed
+            bool bInHeader = true;
+            if ( m_pWrtShell->IsInHeaderFooter( &bInHeader ) )
+            {
+                if ( !bInHeader )
+                {
+                    m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Footer, true );
+                    m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Header, false );
+                }
+                else
+                {
+                    m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Header, true );
+                    m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Footer, false );
+                }
+
+                // Force repaint
+                m_pWrtShell->GetWin()->Invalidate();
+            }
+            if ( m_pWrtShell->IsInHeaderFooter() != m_pWrtShell->IsHeaderFooterEdit() )
+                m_pWrtShell->ToggleHeaderFooterEdit();
+
+            if( bSelectObj )
+            {
+                m_pWrtShell->SelectObj( aCursorPos );
+                m_pWrtShell->EnterSelFrameMode( &aCursorPos );
+            }
+        }
+
+        // reset flag value
+        m_pWrtShell->SetMacroExecAllowed( bSavedFlagValue );
+    }
+
+    if (bGotKeepRatio && bKeepRatio != pVOpt->IsKeepRatio())
+    {
+        // Got a custom value, then it makes sense to trigger notifications.
+        SwViewOption aUsrPref(*pVOpt);
+        aUsrPref.SetKeepRatio(bKeepRatio);
+        SW_MOD()->ApplyUsrPref(aUsrPref, this);
+    }
+
+    // Set ViewLayoutSettings
+    const bool bSetViewLayoutSettings = bGotViewLayoutColumns && bGotViewLayoutBookMode &&
+                                        ( pVOpt->GetViewLayoutColumns() != nViewLayoutColumns || pVOpt->IsViewLayoutBookMode() != bViewLayoutBookMode );
+
+    const bool bSetViewSettings = bGotZoomType && bGotZoomFactor &&
+                                  ( pVOpt->GetZoom() != nZoomFactor || pVOpt->GetZoomType() != eZoom );
+
+    // In case we have a 'fixed' view layout of 2 or more columns,
+    // we have to apply the view options *before* starting the action.
+    // Otherwise the SetZoom function cannot work correctly, because
+    // the view layout hasn't been calculated.
+    const bool bZoomNeedsViewLayout = bSetViewLayoutSettings &&
+                                      1 < nViewLayoutColumns &&
+                                      bSetViewSettings &&
+                                      eZoom != SvxZoomType::PERCENT;
+
+    if ( !bZoomNeedsViewLayout )
+        m_pWrtShell->StartAction();
+
+    if ( bSetViewLayoutSettings )
+        SetViewLayout( nViewLayoutColumns, bViewLayoutBookMode, true );
+
+    if ( bZoomNeedsViewLayout )
+        m_pWrtShell->StartAction();
+
+    if ( bSetViewSettings )
+        SetZoom( eZoom, nZoomFactor, true );
+
+// os: changed: The user data has to be read if the view is switched back from page preview
+// go to the last editing position when opening own files
+    if(m_bOldShellWasPagePreview||bIsOwnDocument)
+    {
+        if ( bGotVisibleLeft && bGotVisibleTop )
+        {
+            Point aTopLeft(aVis.TopLeft());
+            // make sure the document is still centered
+            const SwTwips lBorder = IsDocumentBorder() ? DOCUMENTBORDER : 2 * DOCUMENTBORDER;
+            SwTwips nEditWidth = GetEditWin().GetOutDev()->GetOutputSize().Width();
+            if(nEditWidth > (m_aDocSz.Width() + lBorder ))
+                aTopLeft.setX( ( m_aDocSz.Width() + lBorder - nEditWidth  ) / 2 );
+            else
+            {
+                //check if the values are possible
+                tools::Long nXMax = m_pHScrollbar->GetRangeMax() - m_pHScrollbar->GetVisibleSize();
+                if( aTopLeft.X() > nXMax )
+                    aTopLeft.setX( nXMax < 0 ? 0 : nXMax );
+            }
+            SetVisArea( aTopLeft );
+        }
+        else if (bGotVisibleLeft && bGotVisibleTop && bGotVisibleRight && bGotVisibleBottom )
+            SetVisArea( aVis );
+    }
+
+    m_pWrtShell->LockView( true );
+    m_pWrtShell->EndAction();
+    m_pWrtShell->LockView( false );
+    m_pWrtShell->EnableSmooth( true );
+
+}
+
+void SwView::WriteUserDataSequence ( uno::Sequence < beans::PropertyValue >& rSequence )
+{
+    const SwRect& rRect = m_pWrtShell->GetCharRect();
+    const tools::Rectangle& rVis = GetVisArea();
+
+    std::vector<beans::PropertyValue> aVector;
+
+    sal_uInt16 nViewID( GetViewFrame()->GetCurViewId());
+    aVector.push_back(comphelper::makePropertyValue("ViewId", "view" + OUString::number(nViewID)));
+
+    aVector.push_back(comphelper::makePropertyValue("ViewLeft", convertTwipToMm100 ( rRect.Left() )));
+
+    aVector.push_back(comphelper::makePropertyValue("ViewTop", convertTwipToMm100 ( rRect.Top() )));
+
+    auto visibleLeft = convertTwipToMm100 ( rVis.Left() );
+    aVector.push_back(comphelper::makePropertyValue("VisibleLeft", visibleLeft));
+
+    auto visibleTop = convertTwipToMm100 ( rVis.Top() );
+    aVector.push_back(comphelper::makePropertyValue("VisibleTop", visibleTop));
+
+    auto visibleRight = rVis.IsWidthEmpty() ? visibleLeft : convertTwipToMm100 ( rVis.Right() );
+    aVector.push_back(comphelper::makePropertyValue("VisibleRight", visibleRight));
+
+    auto visibleBottom = rVis.IsHeightEmpty() ? visibleTop : convertTwipToMm100 ( rVis.Bottom() );
+    aVector.push_back(comphelper::makePropertyValue("VisibleBottom", visibleBottom));
+
+    const sal_Int16 nZoomType = static_cast< sal_Int16 >(m_pWrtShell->GetViewOptions()->GetZoomType());
+    aVector.push_back(comphelper::makePropertyValue("ZoomType", nZoomType));
+
+    const sal_Int16 nViewLayoutColumns = static_cast< sal_Int16 >(m_pWrtShell->GetViewOptions()->GetViewLayoutColumns());
+    aVector.push_back(comphelper::makePropertyValue("ViewLayoutColumns", nViewLayoutColumns));
+
+    aVector.push_back(comphelper::makePropertyValue("ViewLayoutBookMode", m_pWrtShell->GetViewOptions()->IsViewLayoutBookMode()));
+
+    aVector.push_back(comphelper::makePropertyValue("ZoomFactor", static_cast < sal_Int16 > (m_pWrtShell->GetViewOptions()->GetZoom())));
+
+    aVector.push_back(comphelper::makePropertyValue("IsSelectedFrame", FrameTypeFlags::NONE != m_pWrtShell->GetSelFrameType()));
+
+    aVector.push_back(
+        comphelper::makePropertyValue("KeepRatio", m_pWrtShell->GetViewOptions()->IsKeepRatio()));
+
+    rSequence = comphelper::containerToSequence(aVector);
+
+    // Common SdrModel processing
+    GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel()->WriteUserDataSequence(rSequence);
+}
+
+void SwView::ShowCursor( bool bOn )
+{
+    //don't scroll the cursor into the visible area
+    bool bUnlockView = !m_pWrtShell->IsViewLocked();
+    m_pWrtShell->LockView( true );    //lock visible section
+
+    if( !bOn )
+        m_pWrtShell->HideCursor();
+    else if( !m_pWrtShell->IsFrameSelected() && !m_pWrtShell->IsObjSelected() )
+        m_pWrtShell->ShowCursor();
+
+    if( bUnlockView )
+        m_pWrtShell->LockView( false );
+}
+
+ErrCode SwView::DoVerb(sal_Int32 nVerb)
+{
+    if ( !GetViewFrame()->GetFrame().IsInPlace() )
+    {
+        SwWrtShell &rSh = GetWrtShell();
+        const SelectionType nSel = rSh.GetSelectionType();
+        if ( nSel & SelectionType::Ole )
+            rSh.LaunchOLEObj( nVerb );
+    }
+    return ERRCODE_NONE;
+}
+
+//   only return true for a text selection
+
+bool SwView::HasSelection( bool  bText ) const
+{
+    return bText ? GetWrtShell().SwCursorShell::HasSelection()
+                 : GetWrtShell().HasSelection();
+}
+
+OUString SwView::GetSelectionText( bool bCompleteWrds, bool /*bOnlyASample*/ )
+{
+    return GetSelectionTextParam( bCompleteWrds, true );
+}
+
+OUString SwView::GetSelectionTextParam( bool bCompleteWrds, bool bEraseTrail )
+{
+    OUString sReturn;
+    if( bCompleteWrds && !GetWrtShell().HasSelection() )
+        GetWrtShell().SelWrd();
+
+    GetWrtShell().GetSelectedText( sReturn );
+    if( bEraseTrail )
+        sReturn = comphelper::string::stripEnd(sReturn, ' ');
+    return sReturn;
+}
+
+SwGlossaryHdl* SwView::GetGlosHdl()
+{
+    if(!m_pGlosHdl)
+        m_pGlosHdl.reset(new SwGlossaryHdl(GetViewFrame(), m_pWrtShell.get()));
+    return m_pGlosHdl.get();
+}
+
+void SwView::Notify( SfxBroadcaster& rBC, const SfxHint& rHint )
+{
+    bool bCallBase = true;
+    if(auto pChangedHint = dynamic_cast<const FmDesignModeChangedHint*>(&rHint))
+    {
+        bool bDesignMode = pChangedHint->GetDesignMode();
+        if (!bDesignMode && GetDrawFuncPtr())
+        {
+            GetDrawFuncPtr()->Deactivate();
+            SetDrawFuncPtr(nullptr);
+            LeaveDrawCreate();
+            AttrChangedNotify(nullptr);
+        }
+    }
+    else
+    {
+        SfxHintId nId = rHint.GetId();
+
+        switch ( nId )
+        {
+            // sub shells will be destroyed by the
+            // dispatcher, if the view frame is dying. Thus, reset member <pShell>.
+            case SfxHintId::Dying:
+                {
+                    if ( &rBC == GetViewFrame() )
+                    {
+                        ResetSubShell();
+                    }
+                }
+                break;
+            case SfxHintId::ModeChanged:
+                {
+                    // Modal mode change-over?
+                    bool bModal = GetDocShell()->IsInModalMode();
+                    m_pHRuler->SetActive( !bModal );
+                    m_pVRuler->SetActive( !bModal );
+                }
+
+                [[fallthrough]];
+
+            case SfxHintId::TitleChanged:
+                if ( GetDocShell()->IsReadOnly() != GetWrtShell().GetViewOptions()->IsReadonly() )
+                {
+                    SwWrtShell &rSh = GetWrtShell();
+                    rSh.SetReadonlyOption( GetDocShell()->IsReadOnly() );
+
+                    if ( rSh.GetViewOptions()->IsViewVRuler() )
+                        CreateVRuler();
+                    else
+                        KillVRuler();
+                    if ( rSh.GetViewOptions()->IsViewHRuler() )
+                        CreateTab();
+                    else
+                        KillTab();
+                    bool bReadonly = GetDocShell()->IsReadOnly();
+                    // if document is to be opened in alive-mode then this has to be
+                    // regarded while switching from readonly-mode to edit-mode
+                    if( !bReadonly )
+                    {
+                        SwDrawModel * pDrawDoc = GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel();
+                        if (pDrawDoc)
+                        {
+                            if( !pDrawDoc->GetOpenInDesignMode() )
+                                break;// don't touch the design mode
+                        }
+                    }
+                    SfxBoolItem aItem( SID_FM_DESIGN_MODE, !bReadonly);
+                    GetDispatcher().ExecuteList(SID_FM_DESIGN_MODE,
+                            SfxCallMode::ASYNCHRON, { &aItem });
+                }
+                break;
+
+            case SfxHintId::SwDrawViewsCreated:
+                {
+                    bCallBase = false;
+                    if ( GetFormShell() )
+                    {
+                        GetFormShell()->SetView(dynamic_cast<FmFormView*>(GetWrtShell().GetDrawView()));
+                        SfxBoolItem aItem( SID_FM_DESIGN_MODE, !GetDocShell()->IsReadOnly());
+                        GetDispatcher().ExecuteList(SID_FM_DESIGN_MODE,
+                                SfxCallMode::SYNCHRON, { &aItem });
+                    }
+                }
+                break;
+            case SfxHintId::RedlineChanged:
+                {
+                    static sal_uInt16 const aSlotRedLine[] = {
+                        FN_REDLINE_ACCEPT_DIRECT,
+                        FN_REDLINE_REJECT_DIRECT,
+                        FN_REDLINE_NEXT_CHANGE,
+                        FN_REDLINE_PREV_CHANGE,
+                        FN_REDLINE_ACCEPT_ALL,
+                        FN_REDLINE_REJECT_ALL,
+                        0
+                    };
+                    GetViewFrame()->GetBindings().Invalidate(aSlotRedLine);
+                }
+                break;
+            default: break;
+        }
+    }
+
+    if ( bCallBase )
+        SfxViewShell::Notify(rBC, rHint);
+}
+
+#if defined(_WIN32) || defined UNX
+
+void SwView::ScannerEventHdl()
+{
+    uno::Reference< XScannerManager2 > xScanMgr = SW_MOD()->GetScannerManager();
+    if( xScanMgr.is() )
+    {
+        const ScannerContext    aContext( xScanMgr->getAvailableScanners().getConstArray()[ 0 ] );
+        const ScanError         eError = xScanMgr->getError( aContext );
+
+        if( ScanError_ScanErrorNone == eError )
+        {
+            const uno::Reference< awt::XBitmap > xBitmap( xScanMgr->getBitmap( aContext ) );
+
+            if( xBitmap.is() )
+            {
+                const BitmapEx aScanBmp( VCLUnoHelper::GetBitmap( xBitmap ) );
+
+                if( !aScanBmp.IsEmpty() )
+                {
+                    Graphic aGrf(aScanBmp);
+                    m_pWrtShell->InsertGraphic( OUString(), OUString(), aGrf );
+                }
+            }
+        }
+    }
+    SfxBindings& rBind = GetViewFrame()->GetBindings();
+    rBind.Invalidate( SID_TWAIN_SELECT );
+    rBind.Invalidate( SID_TWAIN_TRANSFER );
+}
+#endif
+
+void    SwView::StopShellTimer()
+{
+    if(m_aTimer.IsActive())
+    {
+        m_aTimer.Stop();
+        if ( m_bAttrChgNotifiedWithRegistrations )
+        {
+            GetViewFrame()->GetBindings().LEAVEREGISTRATIONS();
+            m_bAttrChgNotifiedWithRegistrations = false;
+        }
+        SelectShell();
+        m_bAttrChgNotified = false;
+    }
+}
+
+bool SwView::PrepareClose( bool bUI )
+{
+    SfxViewFrame* pVFrame = GetViewFrame();
+    pVFrame->SetChildWindow( SwInputChild::GetChildWindowId(), false );
+    if( pVFrame->GetDispatcher()->IsLocked() )
+        pVFrame->GetDispatcher()->Lock(false);
+
+    if ( m_pFormShell && !m_pFormShell->PrepareClose( bUI ) )
+    {
+        return false;
+    }
+    return SfxViewShell::PrepareClose( bUI );
+}
+
+// status methods for clipboard.
+// Status changes now notified from the clipboard.
+bool SwView::IsPasteAllowed()
+{
+    SotExchangeDest nPasteDestination = SwTransferable::GetSotDestination( *m_pWrtShell );
+    if( m_nLastPasteDestination != nPasteDestination )
+    {
+        TransferableDataHelper aDataHelper(
+                        TransferableDataHelper::CreateFromSystemClipboard(
+                                                        &GetEditWin()) );
+        if( aDataHelper.GetXTransferable().is() )
+        {
+            m_bPasteState = SwTransferable::IsPaste( *m_pWrtShell, aDataHelper );
+            m_bPasteSpecialState = SwTransferable::IsPasteSpecial(
+                                                    *m_pWrtShell, aDataHelper );
+        }
+        else
+            m_bPasteState = m_bPasteSpecialState = false;
+
+        if( static_cast<SotExchangeDest>(0xFFFF) == m_nLastPasteDestination )  // the init value
+            m_pViewImpl->AddClipboardListener();
+        m_nLastPasteDestination = nPasteDestination;
+    }
+    return m_bPasteState;
+}
+
+bool SwView::IsPasteSpecialAllowed()
+{
+    if ( m_pFormShell && m_pFormShell->IsActiveControl() )
+        return false;
+
+    SotExchangeDest nPasteDestination = SwTransferable::GetSotDestination( *m_pWrtShell );
+    if( m_nLastPasteDestination != nPasteDestination )
+    {
+        TransferableDataHelper aDataHelper(
+                        TransferableDataHelper::CreateFromSystemClipboard(
+                                                        &GetEditWin()) );
+        if( aDataHelper.GetXTransferable().is() )
+        {
+            m_bPasteState = SwTransferable::IsPaste( *m_pWrtShell, aDataHelper );
+            m_bPasteSpecialState = SwTransferable::IsPasteSpecial(
+                                                    *m_pWrtShell, aDataHelper );
+        }
+        else
+            m_bPasteState = m_bPasteSpecialState = false;
+
+        if( static_cast<SotExchangeDest>(0xFFFF) == m_nLastPasteDestination )  // the init value
+            m_pViewImpl->AddClipboardListener();
+    }
+    return m_bPasteSpecialState;
+}
+
+bool SwView::IsPasteSpreadsheet(bool bHasOwnTableCopied)
+{
+    TransferableDataHelper aDataHelper(
+                        TransferableDataHelper::CreateFromSystemClipboard(
+                                                        &GetEditWin()) );
+    if( aDataHelper.GetXTransferable().is() )
+    {
+        if (bHasOwnTableCopied && SwTransferable::IsPasteOwnFormat( aDataHelper ))
+            return true;
+        return aDataHelper.HasFormat( SotClipboardFormatId::SYLK ) || aDataHelper.HasFormat( SotClipboardFormatId::SYLK_BIGCAPS );
+    }
+    return false;
+}
+
+void SwView::NotifyDBChanged()
+{
+    GetViewImpl()->GetUNOObject_Impl()->NotifyDBChanged();
+}
+
+// Printing
+
+SfxObjectShellLock SwView::CreateTmpSelectionDoc()
+{
+    SwXTextView *const pTempImpl = GetViewImpl()->GetUNOObject_Impl();
+    return pTempImpl->BuildTmpSelectionDoc();
+}
+
+void SwView::AddTransferable(SwTransferable& rTransferable)
+{
+    GetViewImpl()->AddTransferable(rTransferable);
+}
+
+tools::Rectangle SwView::getLOKVisibleArea() const
+{
+    SwViewShell* pVwSh = GetWrtShellPtr();
+    if (pVwSh)
+        return pVwSh->getLOKVisibleArea();
+    else
+        return tools::Rectangle();
+}
+
+void SwView::flushPendingLOKInvalidateTiles()
+{
+    SwWrtShell* pSh = GetWrtShellPtr();
+    assert(pSh);
+    pSh->FlushPendingLOKInvalidateTiles();
+}
+
+OString SwView::getLOKPayload(int nType, int nViewId, bool* ignore) const
+{
+    SwWrtShell* pSh = GetWrtShellPtr();
+    assert(pSh);
+    return pSh->getLOKPayload(nType, nViewId, ignore);
+}
+
+OUString SwView::GetDataSourceName() const
+{
+    uno::Reference<lang::XMultiServiceFactory> xFactory(GetDocShell()->GetModel(), uno::UNO_QUERY);
+    uno::Reference<beans::XPropertySet> xSettings(
+        xFactory->createInstance("com.sun.star.document.Settings"), uno::UNO_QUERY);
+    OUString sDataSourceName = "";
+    xSettings->getPropertyValue("CurrentDatabaseDataSource") >>= sDataSourceName;
+
+    return sDataSourceName;
+}
+
+bool SwView::IsDataSourceAvailable(const OUString sDataSourceName)
+{
+    uno::Reference< uno::XComponentContext > xContext( ::comphelper::getProcessComponentContext() );
+    Reference< XDatabaseContext> xDatabaseContext = DatabaseContext::create(xContext);
+
+    return xDatabaseContext->hasByName(sDataSourceName);
+}
+
+namespace sw {
+
+void InitPrintOptionsFromApplication(SwPrintData & o_rData, bool const bWeb)
+{
+    o_rData = *SW_MOD()->GetPrtOptions(bWeb);
+}
+
+} // namespace sw
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */