Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 5196 insertions, 0 deletions

diff --git a/xmloff/source/draw/shapeexport.cxx b/xmloff/source/draw/shapeexport.cxx
new file mode 100644
index 000000000..836721478
--- /dev/null
+++ b/xmloff/source/draw/shapeexport.cxx
@@ -0,0 +1,5196 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <config_wasm_strip.h>
+
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b3dhommatrix.hxx>
+#include <basegfx/polygon/b2dpolypolygon.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <basegfx/polygon/b3dpolypolygon.hxx>
+#include <basegfx/polygon/b3dpolypolygontools.hxx>
+#include <basegfx/tuple/b2dtuple.hxx>
+#include <basegfx/vector/b3dvector.hxx>
+
+#include <com/sun/star/beans/XPropertyState.hpp>
+#include <com/sun/star/beans/PropertyValues.hpp>
+#include <com/sun/star/container/XChild.hpp>
+#include <com/sun/star/container/XEnumerationAccess.hpp>
+#include <com/sun/star/container/XIdentifierAccess.hpp>
+#include <com/sun/star/container/XNamed.hpp>
+#include <com/sun/star/document/XEventsSupplier.hpp>
+#include <com/sun/star/drawing/Alignment.hpp>
+#include <com/sun/star/drawing/CameraGeometry.hpp>
+#include <com/sun/star/drawing/CircleKind.hpp>
+#include <com/sun/star/drawing/ConnectorType.hpp>
+#include <com/sun/star/drawing/Direction3D.hpp>
+#include <com/sun/star/drawing/EscapeDirection.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeAdjustmentValue.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeGluePointType.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeParameterType.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeMetalType.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeSegment.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeSegmentCommand.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeTextFrame.hpp>
+#include <com/sun/star/drawing/EnhancedCustomShapeTextPathMode.hpp>
+#include <com/sun/star/drawing/GluePoint2.hpp>
+#include <com/sun/star/drawing/HomogenMatrix.hpp>
+#include <com/sun/star/drawing/HomogenMatrix3.hpp>
+#include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp>
+#include <com/sun/star/drawing/PolyPolygonShape3D.hpp>
+#include <com/sun/star/drawing/Position3D.hpp>
+#include <com/sun/star/drawing/ProjectionMode.hpp>
+#include <com/sun/star/drawing/ShadeMode.hpp>
+#include <com/sun/star/drawing/XControlShape.hpp>
+#include <com/sun/star/drawing/XCustomShapeEngine.hpp>
+#include <com/sun/star/drawing/XGluePointsSupplier.hpp>
+#include <com/sun/star/drawing/BarCode.hpp>
+#include <com/sun/star/drawing/BarCodeErrorCorrection.hpp>
+#include <com/sun/star/drawing/XShapes3.hpp>
+#include <com/sun/star/embed/ElementModes.hpp>
+#include <com/sun/star/embed/XStorage.hpp>
+#include <com/sun/star/embed/XTransactedObject.hpp>
+#include <com/sun/star/graphic/XGraphic.hpp>
+#include <com/sun/star/graphic/GraphicProvider.hpp>
+#include <com/sun/star/graphic/XGraphicProvider.hpp>
+#include <com/sun/star/io/XSeekableInputStream.hpp>
+#include <com/sun/star/io/XStream.hpp>
+#include <com/sun/star/lang/ServiceNotRegisteredException.hpp>
+#include <com/sun/star/lang/XMultiServiceFactory.hpp>
+#include <com/sun/star/media/ZoomLevel.hpp>
+#include <com/sun/star/presentation/AnimationSpeed.hpp>
+#include <com/sun/star/presentation/ClickAction.hpp>
+#include <com/sun/star/style/XStyle.hpp>
+#include <com/sun/star/table/XColumnRowRange.hpp>
+#include <com/sun/star/text/XText.hpp>
+
+#include <comphelper/classids.hxx>
+#include <comphelper/processfactory.hxx>
+#include <comphelper/propertyvalue.hxx>
+#include <comphelper/storagehelper.hxx>
+#include <officecfg/Office/Common.hxx>
+
+#include <o3tl/any.hxx>
+#include <o3tl/typed_flags_set.hxx>
+#include <o3tl/string_view.hxx>
+
+#include <rtl/math.hxx>
+#include <rtl/ustrbuf.hxx>
+#include <rtl/ustring.hxx>
+#include <sal/log.hxx>
+
+#include <sax/tools/converter.hxx>
+
+#include <tools/debug.hxx>
+#include <tools/globname.hxx>
+#include <tools/helpers.hxx>
+#include <tools/diagnose_ex.h>
+#include <vcl/graph.hxx>
+
+#include <xmloff/contextid.hxx>
+#include <xmloff/families.hxx>
+#include <xmloff/namespacemap.hxx>
+#include <xmloff/shapeexport.hxx>
+#include <xmloff/unointerfacetouniqueidentifiermapper.hxx>
+#include <xmloff/xmlexp.hxx>
+#include <xmloff/xmlnamespace.hxx>
+#include <xmloff/xmltoken.hxx>
+#include <xmloff/xmluconv.hxx>
+#include <xmloff/table/XMLTableExport.hxx>
+#include <xmloff/ProgressBarHelper.hxx>
+
+#include <anim.hxx>
+#include <EnhancedCustomShapeToken.hxx>
+#include "sdpropls.hxx"
+#include <xexptran.hxx>
+#include "ximpshap.hxx"
+#include <XMLBase64Export.hxx>
+#include <XMLImageMapExport.hxx>
+#include <memory>
+
+using namespace ::com::sun::star;
+using namespace ::xmloff::EnhancedCustomShapeToken;
+using namespace ::xmloff::token;
+
+constexpr OUStringLiteral XML_EMBEDDEDOBJECTGRAPHIC_URL_BASE = u"vnd.sun.star.GraphicObject:";
+
+namespace {
+
+bool supportsText(XmlShapeType eShapeType)
+{
+        return eShapeType != XmlShapeTypePresChartShape &&
+        eShapeType != XmlShapeTypePresOLE2Shape &&
+        eShapeType != XmlShapeTypeDrawSheetShape &&
+        eShapeType != XmlShapeTypePresSheetShape &&
+        eShapeType != XmlShapeTypeDraw3DSceneObject &&
+        eShapeType != XmlShapeTypeDraw3DCubeObject &&
+        eShapeType != XmlShapeTypeDraw3DSphereObject &&
+        eShapeType != XmlShapeTypeDraw3DLatheObject &&
+        eShapeType != XmlShapeTypeDraw3DExtrudeObject &&
+        eShapeType != XmlShapeTypeDrawPageShape &&
+        eShapeType != XmlShapeTypePresPageShape &&
+        eShapeType != XmlShapeTypeDrawGroupShape;
+
+}
+
+}
+
+constexpr OUStringLiteral gsZIndex( u"ZOrder" );
+constexpr OUStringLiteral gsPrintable( u"Printable" );
+constexpr OUStringLiteral gsVisible( u"Visible" );
+constexpr OUStringLiteral gsModel( u"Model" );
+constexpr OUStringLiteral gsStartShape( u"StartShape" );
+constexpr OUStringLiteral gsEndShape( u"EndShape" );
+constexpr OUStringLiteral gsOnClick( u"OnClick" );
+constexpr OUStringLiteral gsEventType( u"EventType" );
+constexpr OUStringLiteral gsPresentation( u"Presentation" );
+constexpr OUStringLiteral gsMacroName( u"MacroName" );
+constexpr OUStringLiteral gsScript( u"Script" );
+constexpr OUStringLiteral gsLibrary( u"Library" );
+constexpr OUStringLiteral gsClickAction( u"ClickAction" );
+constexpr OUStringLiteral gsBookmark( u"Bookmark" );
+constexpr OUStringLiteral gsEffect( u"Effect" );
+constexpr OUStringLiteral gsPlayFull( u"PlayFull" );
+constexpr OUStringLiteral gsVerb( u"Verb" );
+constexpr OUStringLiteral gsSoundURL( u"SoundURL" );
+constexpr OUStringLiteral gsSpeed( u"Speed" );
+constexpr OUStringLiteral gsStarBasic( u"StarBasic" );
+constexpr OUStringLiteral gsHyperlink( u"Hyperlink" );
+
+XMLShapeExport::XMLShapeExport(SvXMLExport& rExp,
+                                SvXMLExportPropertyMapper *pExtMapper )
+:   mrExport( rExp ),
+    maCurrentShapesIter(maShapesInfos.end()),
+    mbExportLayer( false ),
+    // #88546# init to sal_False
+    mbHandleProgressBar( false )
+{
+    // construct PropertySetMapper
+    mxPropertySetMapper = CreateShapePropMapper( mrExport );
+    if( pExtMapper )
+    {
+        rtl::Reference < SvXMLExportPropertyMapper > xExtMapper( pExtMapper );
+        mxPropertySetMapper->ChainExportMapper( xExtMapper );
+    }
+
+/*
+    // chain text attributes
+    xPropertySetMapper->ChainExportMapper(XMLTextParagraphExport::CreateParaExtPropMapper(rExp));
+*/
+
+    mrExport.GetAutoStylePool()->AddFamily(
+        XmlStyleFamily::SD_GRAPHICS_ID,
+        XML_STYLE_FAMILY_SD_GRAPHICS_NAME,
+        GetPropertySetMapper(),
+        XML_STYLE_FAMILY_SD_GRAPHICS_PREFIX);
+    mrExport.GetAutoStylePool()->AddFamily(
+        XmlStyleFamily::SD_PRESENTATION_ID,
+        XML_STYLE_FAMILY_SD_PRESENTATION_NAME,
+        GetPropertySetMapper(),
+        XML_STYLE_FAMILY_SD_PRESENTATION_PREFIX);
+
+    // create table export helper and let him add his families in time
+    GetShapeTableExport();
+}
+
+XMLShapeExport::~XMLShapeExport()
+{
+}
+
+// sj: replacing CustomShapes with standard objects that are also supported in OpenOffice.org format
+uno::Reference< drawing::XShape > XMLShapeExport::checkForCustomShapeReplacement( const uno::Reference< drawing::XShape >& xShape )
+{
+    uno::Reference< drawing::XShape > xCustomShapeReplacement;
+
+    if( !( GetExport().getExportFlags() & SvXMLExportFlags::OASIS ) )
+    {
+        OUString aType( xShape->getShapeType() );
+        if( aType == "com.sun.star.drawing.CustomShape" )
+        {
+            uno::Reference< beans::XPropertySet > xSet( xShape, uno::UNO_QUERY );
+            if( xSet.is() )
+            {
+                OUString aEngine;
+                xSet->getPropertyValue("CustomShapeEngine") >>= aEngine;
+                if ( aEngine.isEmpty() )
+                {
+                    aEngine = "com.sun.star.drawing.EnhancedCustomShapeEngine";
+                }
+                uno::Reference< uno::XComponentContext > xContext( ::comphelper::getProcessComponentContext() );
+
+                if ( !aEngine.isEmpty() )
+                {
+                    uno::Sequence< beans::PropertyValue > aPropValues{
+                        comphelper::makePropertyValue("CustomShape", xShape),
+                        comphelper::makePropertyValue("ForceGroupWithText", true)
+                    };
+                    uno::Sequence< uno::Any > aArgument = { uno::Any(aPropValues) };
+                    uno::Reference< uno::XInterface > xInterface(
+                        xContext->getServiceManager()->createInstanceWithArgumentsAndContext(aEngine, aArgument, xContext) );
+                    if ( xInterface.is() )
+                    {
+                        uno::Reference< drawing::XCustomShapeEngine > xCustomShapeEngine(
+                            uno::Reference< drawing::XCustomShapeEngine >( xInterface, uno::UNO_QUERY ) );
+                        if ( xCustomShapeEngine.is() )
+                            xCustomShapeReplacement = xCustomShapeEngine->render();
+                    }
+                }
+            }
+        }
+    }
+    return xCustomShapeReplacement;
+}
+
+// This method collects all automatic styles for the given XShape
+void XMLShapeExport::collectShapeAutoStyles(const uno::Reference< drawing::XShape >& xShape )
+{
+    if( maCurrentShapesIter == maShapesInfos.end() )
+    {
+        OSL_FAIL( "XMLShapeExport::collectShapeAutoStyles(): no call to seekShapes()!" );
+        return;
+    }
+    sal_Int32 nZIndex = 0;
+    uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if( xPropSet.is() )
+        xPropSet->getPropertyValue(gsZIndex) >>= nZIndex;
+
+    ImplXMLShapeExportInfoVector& aShapeInfoVector = (*maCurrentShapesIter).second;
+
+    if( static_cast<sal_Int32>(aShapeInfoVector.size()) <= nZIndex )
+    {
+        OSL_FAIL( "XMLShapeExport::collectShapeAutoStyles(): no shape info allocated for a given shape" );
+        return;
+    }
+
+    ImplXMLShapeExportInfo& aShapeInfo = aShapeInfoVector[nZIndex];
+
+    uno::Reference< drawing::XShape > xCustomShapeReplacement = checkForCustomShapeReplacement( xShape );
+    if ( xCustomShapeReplacement.is() )
+        aShapeInfo.xCustomShapeReplacement = xCustomShapeReplacement;
+
+    // first compute the shapes type
+    ImpCalcShapeType(xShape, aShapeInfo.meShapeType);
+
+    // #i118485# enabled XmlShapeTypeDrawChartShape and XmlShapeTypeDrawOLE2Shape
+    // to have text
+    const bool bObjSupportsText =
+        supportsText(aShapeInfo.meShapeType);
+
+    const bool bObjSupportsStyle =
+        aShapeInfo.meShapeType != XmlShapeTypeDrawGroupShape;
+
+    bool bIsEmptyPresObj = false;
+
+    if ( aShapeInfo.xCustomShapeReplacement.is() )
+        xPropSet.clear();
+
+    // prep text styles
+    if( xPropSet.is() && bObjSupportsText )
+    {
+        uno::Reference< text::XText > xText(xShape, uno::UNO_QUERY);
+        if (xText.is())
+        {
+            try
+            {
+                // tdf#153161: it seems that the call to XTextRange::getString flushes the changes
+                // for some objects, that otherwise fail to get exported correctly. Maybe at some
+                // point it would make sense to find a better place for more targeted flush.
+                xText->getString();
+            }
+            catch (uno::RuntimeException const&)
+            {
+                // E.g., SwXTextFrame that contains only a table will throw; this is not an error
+            }
+
+            uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() );
+
+            if( xPropSetInfo.is() && xPropSetInfo->hasPropertyByName("IsEmptyPresentationObject") )
+            {
+                uno::Any aAny = xPropSet->getPropertyValue("IsEmptyPresentationObject");
+                aAny >>= bIsEmptyPresObj;
+            }
+
+            if(!bIsEmptyPresObj)
+            {
+                GetExport().GetTextParagraphExport()->collectTextAutoStyles( xText );
+            }
+        }
+    }
+
+    // compute the shape parent style
+    if( xPropSet.is() )
+    {
+        uno::Reference< beans::XPropertySetInfo > xPropertySetInfo( xPropSet->getPropertySetInfo() );
+
+        OUString aParentName;
+        uno::Reference< style::XStyle > xStyle;
+
+        if( bObjSupportsStyle )
+        {
+            if( xPropertySetInfo.is() && xPropertySetInfo->hasPropertyByName("Style") )
+                xPropSet->getPropertyValue("Style") >>= xStyle;
+
+            if(xStyle.is())
+            {
+                // get family ID
+                uno::Reference< beans::XPropertySet > xStylePropSet(xStyle, uno::UNO_QUERY);
+                SAL_WARN_IF( !xStylePropSet.is(), "xmloff", "style without a XPropertySet?" );
+                try
+                {
+                    if(xStylePropSet.is())
+                    {
+                        OUString aFamilyName;
+                        xStylePropSet->getPropertyValue("Family") >>= aFamilyName;
+                        if( !aFamilyName.isEmpty() && aFamilyName != "graphics" )
+                            aShapeInfo.mnFamily = XmlStyleFamily::SD_PRESENTATION_ID;
+                    }
+                }
+                catch(const beans::UnknownPropertyException&)
+                {
+                    // Ignored.
+                    SAL_WARN( "xmloff",
+                        "XMLShapeExport::collectShapeAutoStyles: style has no 'Family' property");
+                }
+
+                // get parent-style name
+                if(XmlStyleFamily::SD_PRESENTATION_ID == aShapeInfo.mnFamily)
+                {
+                    aParentName = msPresentationStylePrefix;
+                }
+
+                aParentName += xStyle->getName();
+            }
+        }
+
+        if (aParentName.isEmpty() && xPropertySetInfo->hasPropertyByName("TextBox") && xPropSet->getPropertyValue("TextBox").hasValue() && xPropSet->getPropertyValue("TextBox").get<bool>())
+        {
+            // Shapes with a Writer TextBox always have a parent style.
+            // If there would be none, then assign the default one.
+            aParentName = "Frame";
+        }
+
+        // filter propset
+        std::vector< XMLPropertyState > aPropStates;
+
+        sal_Int32 nCount = 0;
+        if( !bIsEmptyPresObj || (aShapeInfo.meShapeType != XmlShapeTypePresPageShape) )
+        {
+            aPropStates = GetPropertySetMapper()->Filter(mrExport, xPropSet);
+
+            if (XmlShapeTypeDrawControlShape == aShapeInfo.meShapeType)
+            {
+                // for control shapes, we additionally need the number format style (if any)
+                uno::Reference< drawing::XControlShape > xControl(xShape, uno::UNO_QUERY);
+                DBG_ASSERT(xControl.is(), "XMLShapeExport::collectShapeAutoStyles: ShapeType control, but no XControlShape!");
+                if (xControl.is())
+                {
+                    uno::Reference< beans::XPropertySet > xControlModel(xControl->getControl(), uno::UNO_QUERY);
+                    DBG_ASSERT(xControlModel.is(), "XMLShapeExport::collectShapeAutoStyles: no control model on the control shape!");
+
+                    OUString sNumberStyle = mrExport.GetFormExport()->getControlNumberStyle(xControlModel);
+                    if (!sNumberStyle.isEmpty())
+                    {
+                        sal_Int32 nIndex = GetPropertySetMapper()->getPropertySetMapper()->FindEntryIndex(CTF_SD_CONTROL_SHAPE_DATA_STYLE);
+                            // TODO : this retrieval of the index could be moved into the ctor, holding the index
+                            //          as member, thus saving time.
+                        DBG_ASSERT(-1 != nIndex, "XMLShapeExport::collectShapeAutoStyles: could not obtain the index for our context id!");
+
+                        XMLPropertyState aNewState(nIndex, uno::Any(sNumberStyle));
+                        aPropStates.push_back(aNewState);
+                    }
+                }
+            }
+
+            nCount = std::count_if(aPropStates.cbegin(), aPropStates.cend(),
+                [](const XMLPropertyState& rProp) { return rProp.mnIndex != -1; });
+        }
+
+        if(nCount == 0)
+        {
+            // no hard attributes, use parent style name for export
+            aShapeInfo.msStyleName = aParentName;
+        }
+        else
+        {
+            // there are filtered properties -> hard attributes
+            // try to find this style in AutoStylePool
+            aShapeInfo.msStyleName = mrExport.GetAutoStylePool()->Find(aShapeInfo.mnFamily, aParentName, aPropStates);
+
+            if(aShapeInfo.msStyleName.isEmpty())
+            {
+                // Style did not exist, add it to AutoStalePool
+                aShapeInfo.msStyleName = mrExport.GetAutoStylePool()->Add(aShapeInfo.mnFamily, aParentName, std::move(aPropStates));
+            }
+        }
+
+        // optionally generate auto style for text attributes
+        if( (!bIsEmptyPresObj || (aShapeInfo.meShapeType != XmlShapeTypePresPageShape)) && bObjSupportsText )
+        {
+            aPropStates = GetExport().GetTextParagraphExport()->GetParagraphPropertyMapper()->Filter(mrExport, xPropSet);
+
+            // yet more additionally, we need to care for the ParaAdjust property
+            if ( XmlShapeTypeDrawControlShape == aShapeInfo.meShapeType )
+            {
+                uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() );
+                uno::Reference< beans::XPropertyState > xPropState( xPropSet, uno::UNO_QUERY );
+                if ( xPropSetInfo.is() && xPropState.is() )
+                {
+                    // this is because:
+                    // * if controls shapes have a ParaAdjust property, then this is the Align property of the control model
+                    // * control models are allowed to have an Align of "void"
+                    // * the Default for control model's Align is TextAlign_LEFT
+                    // * defaults for style properties are not written, but we need to write the "left",
+                    //   because we need to distinguish this "left" from the case where not align attribute
+                    //   is present which means "void"
+                    if  (   xPropSetInfo->hasPropertyByName( "ParaAdjust" )
+                        &&  ( beans::PropertyState_DEFAULT_VALUE == xPropState->getPropertyState( "ParaAdjust" ) )
+                        )
+                    {
+                        sal_Int32 nIndex = GetExport().GetTextParagraphExport()->GetParagraphPropertyMapper()->getPropertySetMapper()->FindEntryIndex( CTF_SD_SHAPE_PARA_ADJUST );
+                            // TODO : this retrieval of the index should be moved into the ctor, holding the index
+                            //          as member, thus saving time.
+                        DBG_ASSERT(-1 != nIndex, "XMLShapeExport::collectShapeAutoStyles: could not obtain the index for the ParaAdjust context id!");
+
+                        uno::Any aParaAdjustValue = xPropSet->getPropertyValue( "ParaAdjust" );
+                        XMLPropertyState aAlignDefaultState( nIndex, aParaAdjustValue );
+
+                        aPropStates.push_back( aAlignDefaultState );
+                    }
+                }
+            }
+
+            nCount = std::count_if(aPropStates.cbegin(), aPropStates.cend(),
+                [](const XMLPropertyState& rProp) { return rProp.mnIndex != -1; });
+
+            if( nCount )
+            {
+                aShapeInfo.msTextStyleName = mrExport.GetAutoStylePool()->Find( XmlStyleFamily::TEXT_PARAGRAPH, "", aPropStates );
+                if(aShapeInfo.msTextStyleName.isEmpty())
+                {
+                    // Style did not exist, add it to AutoStalePool
+                    aShapeInfo.msTextStyleName = mrExport.GetAutoStylePool()->Add(XmlStyleFamily::TEXT_PARAGRAPH, "", std::move(aPropStates));
+                }
+            }
+        }
+    }
+
+    // prepare animation information if needed
+    if( mxAnimationsExporter.is() )
+        XMLAnimationsExporter::prepare( xShape );
+
+    // check for special shapes
+
+    switch( aShapeInfo.meShapeType )
+    {
+        case XmlShapeTypeDrawConnectorShape:
+        {
+            uno::Reference< uno::XInterface > xConnection;
+
+            // create shape ids for export later
+            xPropSet->getPropertyValue( gsStartShape ) >>= xConnection;
+            if( xConnection.is() )
+                mrExport.getInterfaceToIdentifierMapper().registerReference( xConnection );
+
+            xPropSet->getPropertyValue( gsEndShape ) >>= xConnection;
+            if( xConnection.is() )
+                mrExport.getInterfaceToIdentifierMapper().registerReference( xConnection );
+            break;
+        }
+        case XmlShapeTypePresTableShape:
+        case XmlShapeTypeDrawTableShape:
+        {
+            try
+            {
+                uno::Reference< table::XColumnRowRange > xRange( xPropSet->getPropertyValue( gsModel ), uno::UNO_QUERY_THROW );
+                GetShapeTableExport()->collectTableAutoStyles( xRange );
+            }
+            catch(const uno::Exception&)
+            {
+                DBG_UNHANDLED_EXCEPTION( "xmloff", "collecting auto styles for a table" );
+            }
+            break;
+        }
+        default:
+            break;
+    }
+
+    // check for shape collections (group shape or 3d scene)
+    // and collect contained shapes style infos
+    const uno::Reference< drawing::XShape >& xCollection = aShapeInfo.xCustomShapeReplacement.is()
+                                                ? aShapeInfo.xCustomShapeReplacement : xShape;
+    {
+        uno::Reference< drawing::XShapes > xShapes( xCollection, uno::UNO_QUERY );
+        if( xShapes.is() )
+        {
+            collectShapesAutoStyles( xShapes );
+        }
+    }
+}
+
+namespace
+{
+    class NewTextListsHelper
+    {
+        public:
+            explicit NewTextListsHelper( SvXMLExport& rExp )
+                : mrExport( rExp )
+            {
+                mrExport.GetTextParagraphExport()->PushNewTextListsHelper();
+            }
+
+            ~NewTextListsHelper()
+            {
+                mrExport.GetTextParagraphExport()->PopTextListsHelper();
+            }
+
+        private:
+            SvXMLExport& mrExport;
+    };
+}
+// This method exports the given XShape
+void XMLShapeExport::exportShape(const uno::Reference< drawing::XShape >& xShape,
+                                 XMLShapeExportFlags nFeatures /* = SEF_DEFAULT */,
+                                 css::awt::Point* pRefPoint /* = NULL */,
+                                 SvXMLAttributeList* pAttrList /* = NULL */ )
+{
+    SAL_INFO("xmloff", xShape->getShapeType());
+    if( maCurrentShapesIter == maShapesInfos.end() )
+    {
+        SAL_WARN( "xmloff", "XMLShapeExport::exportShape(): no auto styles where collected before export" );
+        return;
+    }
+    sal_Int32 nZIndex = 0;
+    uno::Reference< beans::XPropertySet > xSet( xShape, uno::UNO_QUERY );
+    OUString sHyperlink;
+    try
+    {
+        xSet->getPropertyValue(gsHyperlink) >>= sHyperlink;
+    }
+    catch (beans::UnknownPropertyException)
+    {
+    }
+
+    std::unique_ptr< SvXMLElementExport >  pHyperlinkElement;
+
+    // Need to stash the attributes that are pre-loaded for the shape export
+    // (otherwise they will become attributes of the draw:a element)
+    uno::Reference<xml::sax::XAttributeList> xSaveAttribs(
+        new SvXMLAttributeList(GetExport().GetAttrList()));
+    GetExport().ClearAttrList();
+    if( xSet.is() && (GetExport().GetModelType() == SvtModuleOptions::EFactory::DRAW) )
+    {
+        // export hyperlinks with <a><shape/></a>. Currently only in draw since draw
+        // does not support document events
+        try
+        {
+            presentation::ClickAction eAction = presentation::ClickAction_NONE;
+            xSet->getPropertyValue(gsOnClick) >>= eAction;
+
+            if( (eAction == presentation::ClickAction_DOCUMENT) ||
+                (eAction == presentation::ClickAction_BOOKMARK) )
+            {
+                OUString sURL;
+                xSet->getPropertyValue(gsBookmark) >>= sURL;
+
+                if( !sURL.isEmpty() )
+                {
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_HREF, sURL );
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+                    pHyperlinkElement.reset( new SvXMLElementExport(mrExport, XML_NAMESPACE_DRAW, XML_A, true, true) );
+                }
+            }
+        }
+        catch(const uno::Exception&)
+        {
+            TOOLS_WARN_EXCEPTION("xmloff", "XMLShapeExport::exportShape(): exception during hyperlink export");
+        }
+    }
+    else if (xSet.is() && !sHyperlink.isEmpty())
+    {
+        mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_HREF, sHyperlink );
+        mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+        pHyperlinkElement.reset( new SvXMLElementExport(mrExport, XML_NAMESPACE_DRAW, XML_A, true, true) );
+    }
+    // re-add stashed attributes
+    GetExport().AddAttributeList(xSaveAttribs);
+
+    if( xSet.is() )
+        xSet->getPropertyValue(gsZIndex) >>= nZIndex;
+
+    ImplXMLShapeExportInfoVector& aShapeInfoVector = (*maCurrentShapesIter).second;
+
+    if( static_cast<sal_Int32>(aShapeInfoVector.size()) <= nZIndex )
+    {
+        SAL_WARN( "xmloff", "XMLShapeExport::exportShape(): no shape info collected for a given shape" );
+        return;
+    }
+
+    NewTextListsHelper aNewTextListsHelper( mrExport );
+
+    const ImplXMLShapeExportInfo& aShapeInfo = aShapeInfoVector[nZIndex];
+
+#ifdef DBG_UTIL
+    // check if this is the correct ShapesInfo
+    uno::Reference< container::XChild > xChild( xShape, uno::UNO_QUERY );
+    if( xChild.is() )
+    {
+        uno::Reference< drawing::XShapes > xParent( xChild->getParent(), uno::UNO_QUERY );
+        SAL_WARN_IF( !xParent.is() && xParent.get() == (*maCurrentShapesIter).first.get(), "xmloff", "XMLShapeExport::exportShape(): Wrong call to XMLShapeExport::seekShapes()" );
+    }
+
+    // first compute the shapes type
+    {
+        XmlShapeType eShapeType(XmlShapeTypeNotYetSet);
+        ImpCalcShapeType(xShape, eShapeType);
+
+        SAL_WARN_IF( eShapeType != aShapeInfo.meShapeType, "xmloff", "exportShape callings do not correspond to collectShapeAutoStyles calls!: " << xShape->getShapeType() );
+    }
+#endif
+
+    // collect animation information if needed
+    if( mxAnimationsExporter.is() )
+        mxAnimationsExporter->collect( xShape, mrExport );
+
+    /* Export shapes name if he has one (#i51726#)
+       Export of the shape name for text documents only if the OpenDocument
+       file format is written - exceptions are group shapes.
+       Note: Writer documents in OpenOffice.org file format doesn't contain
+             any names for shapes, except for group shapes.
+    */
+    {
+        if ( ( GetExport().GetModelType() != SvtModuleOptions::EFactory::WRITER &&
+               GetExport().GetModelType() != SvtModuleOptions::EFactory::WRITERWEB &&
+               GetExport().GetModelType() != SvtModuleOptions::EFactory::WRITERGLOBAL ) ||
+             ( GetExport().getExportFlags() & SvXMLExportFlags::OASIS ) ||
+             aShapeInfo.meShapeType == XmlShapeTypeDrawGroupShape ||
+             ( aShapeInfo.meShapeType == XmlShapeTypeDrawCustomShape &&
+               aShapeInfo.xCustomShapeReplacement.is() ) )
+        {
+            uno::Reference< container::XNamed > xNamed( xShape, uno::UNO_QUERY );
+            if( xNamed.is() )
+            {
+                const OUString aName( xNamed->getName() );
+                if( !aName.isEmpty() )
+                    mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_NAME, aName );
+            }
+        }
+    }
+
+    // export style name
+    if( !aShapeInfo.msStyleName.isEmpty() )
+    {
+        if(XmlStyleFamily::SD_GRAPHICS_ID == aShapeInfo.mnFamily)
+            mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_STYLE_NAME, mrExport.EncodeStyleName( aShapeInfo.msStyleName) );
+        else
+            mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_STYLE_NAME, mrExport.EncodeStyleName( aShapeInfo.msStyleName) );
+    }
+
+    // export text style name
+    if( !aShapeInfo.msTextStyleName.isEmpty() )
+    {
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_TEXT_STYLE_NAME, aShapeInfo.msTextStyleName );
+    }
+
+    // export shapes id if needed
+    {
+        uno::Reference< uno::XInterface > xRef( xShape, uno::UNO_QUERY );
+        const OUString& rShapeId = mrExport.getInterfaceToIdentifierMapper().getIdentifier( xRef );
+        if( !rShapeId.isEmpty() )
+        {
+            mrExport.AddAttributeIdLegacy(XML_NAMESPACE_DRAW, rShapeId);
+        }
+    }
+
+    // export layer information
+    if( mbExportLayer )
+    {
+        // check for group or scene shape and not export layer if this is one
+        uno::Reference< drawing::XShapes > xShapes( xShape, uno::UNO_QUERY );
+        if( !xShapes.is() )
+        {
+            try
+            {
+                uno::Reference< beans::XPropertySet > xProps( xShape, uno::UNO_QUERY );
+                OUString aLayerName;
+                xProps->getPropertyValue("LayerName") >>= aLayerName;
+                mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_LAYER, aLayerName );
+
+            }
+            catch(const uno::Exception&)
+            {
+                DBG_UNHANDLED_EXCEPTION( "xmloff", "exporting layer name for shape" );
+            }
+        }
+    }
+
+    // export draw:display (do not export in ODF 1.3 or older)
+    if (xSet.is() && (mrExport.getSaneDefaultVersion() & SvtSaveOptions::ODFSVER_EXTENDED))
+    {
+        if( aShapeInfo.meShapeType != XmlShapeTypeDrawPageShape && aShapeInfo.meShapeType != XmlShapeTypePresPageShape &&
+            aShapeInfo.meShapeType != XmlShapeTypeHandoutShape && aShapeInfo.meShapeType != XmlShapeTypeDrawChartShape )
+            try
+            {
+                bool bVisible = true;
+                bool bPrintable = true;
+
+                xSet->getPropertyValue(gsVisible) >>= bVisible;
+                xSet->getPropertyValue(gsPrintable) >>= bPrintable;
+
+                XMLTokenEnum eDisplayToken = XML_TOKEN_INVALID;
+                const unsigned short nDisplay = (bVisible ? 2 : 0) | (bPrintable ? 1 : 0);
+                switch( nDisplay )
+                {
+                case 0: eDisplayToken = XML_NONE; break;
+                case 1: eDisplayToken = XML_PRINTER; break;
+                case 2: eDisplayToken = XML_SCREEN; break;
+                // case 3: eDisplayToken = XML_ALWAYS break; this is the default
+                }
+
+                if( eDisplayToken != XML_TOKEN_INVALID )
+                    mrExport.AddAttribute(XML_NAMESPACE_DRAW_EXT, XML_DISPLAY, eDisplayToken );
+            }
+            catch(const uno::Exception&)
+            {
+                DBG_UNHANDLED_EXCEPTION("xmloff.draw");
+            }
+    }
+
+    // #82003# test export count
+    // #91587# ALWAYS increment since now ALL to be exported shapes are counted.
+    if(mrExport.GetShapeExport()->IsHandleProgressBarEnabled())
+    {
+        mrExport.GetProgressBarHelper()->Increment();
+    }
+
+    onExport( xShape );
+
+    // export shape element
+    switch(aShapeInfo.meShapeType)
+    {
+        case XmlShapeTypeDrawRectangleShape:
+        {
+            ImpExportRectangleShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+        case XmlShapeTypeDrawEllipseShape:
+        {
+            ImpExportEllipseShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+        case XmlShapeTypeDrawLineShape:
+        {
+            ImpExportLineShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+        case XmlShapeTypeDrawPolyPolygonShape:  // closed PolyPolygon
+        case XmlShapeTypeDrawPolyLineShape:     // open PolyPolygon
+        case XmlShapeTypeDrawClosedBezierShape: // closed tools::PolyPolygon containing curves
+        case XmlShapeTypeDrawOpenBezierShape:   // open tools::PolyPolygon containing curves
+        {
+            ImpExportPolygonShape(xShape, aShapeInfo.meShapeType, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawTextShape:
+        case XmlShapeTypePresTitleTextShape:
+        case XmlShapeTypePresOutlinerShape:
+        case XmlShapeTypePresSubtitleShape:
+        case XmlShapeTypePresNotesShape:
+        case XmlShapeTypePresHeaderShape:
+        case XmlShapeTypePresFooterShape:
+        case XmlShapeTypePresSlideNumberShape:
+        case XmlShapeTypePresDateTimeShape:
+        {
+            ImpExportTextBoxShape(xShape, aShapeInfo.meShapeType, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawGraphicObjectShape:
+        case XmlShapeTypePresGraphicObjectShape:
+        {
+            ImpExportGraphicObjectShape(xShape, aShapeInfo.meShapeType, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawChartShape:
+        case XmlShapeTypePresChartShape:
+        {
+            ImpExportChartShape(xShape, aShapeInfo.meShapeType, nFeatures, pRefPoint, pAttrList );
+            break;
+        }
+
+        case XmlShapeTypeDrawControlShape:
+        {
+            ImpExportControlShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawConnectorShape:
+        {
+            ImpExportConnectorShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawMeasureShape:
+        {
+            ImpExportMeasureShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawOLE2Shape:
+        case XmlShapeTypePresOLE2Shape:
+        case XmlShapeTypeDrawSheetShape:
+        case XmlShapeTypePresSheetShape:
+        {
+            ImpExportOLE2Shape(xShape, aShapeInfo.meShapeType, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypePresTableShape:
+        case XmlShapeTypeDrawTableShape:
+        {
+            ImpExportTableShape( xShape, aShapeInfo.meShapeType, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawPageShape:
+        case XmlShapeTypePresPageShape:
+        case XmlShapeTypeHandoutShape:
+        {
+            ImpExportPageShape(xShape, aShapeInfo.meShapeType, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawCaptionShape:
+        {
+            ImpExportCaptionShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDraw3DCubeObject:
+        case XmlShapeTypeDraw3DSphereObject:
+        case XmlShapeTypeDraw3DLatheObject:
+        case XmlShapeTypeDraw3DExtrudeObject:
+        {
+            ImpExport3DShape(xShape, aShapeInfo.meShapeType);
+            break;
+        }
+
+        case XmlShapeTypeDraw3DSceneObject:
+        {
+            ImpExport3DSceneShape( xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawGroupShape:
+        {
+            // empty group
+            ImpExportGroupShape( xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawFrameShape:
+        {
+            ImpExportFrameShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawAppletShape:
+        {
+            ImpExportAppletShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawPluginShape:
+        {
+            ImpExportPluginShape(xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypeDrawCustomShape:
+        {
+            if ( aShapeInfo.xCustomShapeReplacement.is() )
+                ImpExportGroupShape( aShapeInfo.xCustomShapeReplacement, nFeatures, pRefPoint );
+            else
+                ImpExportCustomShape( xShape, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypePresMediaShape:
+        case XmlShapeTypeDrawMediaShape:
+        {
+            ImpExportMediaShape( xShape, aShapeInfo.meShapeType, nFeatures, pRefPoint );
+            break;
+        }
+
+        case XmlShapeTypePresOrgChartShape:
+        case XmlShapeTypeUnknown:
+        case XmlShapeTypeNotYetSet:
+        default:
+        {
+            // this should never happen and is an error
+            OSL_FAIL("XMLEXP: WriteShape: unknown or unexpected type of shape in export!");
+            break;
+        }
+    }
+
+    pHyperlinkElement.reset();
+
+    // #97489# #97111#
+    // if there was an error and no element for the shape was exported
+    // we need to clear the attribute list or the attributes will be
+    // set on the next exported element, which can result in corrupt
+    // xml files due to duplicate attributes
+
+    mrExport.CheckAttrList();   // asserts in non pro if we have attributes left
+    mrExport.ClearAttrList();   // clears the attributes
+}
+
+// This method collects all automatic styles for the shapes inside the given XShapes collection
+void XMLShapeExport::collectShapesAutoStyles( const uno::Reference < drawing::XShapes >& xShapes )
+{
+    ShapesInfos::iterator aOldCurrentShapesIter = maCurrentShapesIter;
+    seekShapes( xShapes );
+
+    uno::Reference< drawing::XShape > xShape;
+    const sal_Int32 nShapeCount(xShapes->getCount());
+    for(sal_Int32 nShapeId = 0; nShapeId < nShapeCount; nShapeId++)
+    {
+        xShapes->getByIndex(nShapeId) >>= xShape;
+        SAL_WARN_IF( !xShape.is(), "xmloff", "Shape without a XShape?" );
+        if(!xShape.is())
+            continue;
+
+        collectShapeAutoStyles( xShape );
+    }
+
+    maCurrentShapesIter = aOldCurrentShapesIter;
+}
+
+// This method exports all XShape inside the given XShapes collection
+void XMLShapeExport::exportShapes( const uno::Reference < drawing::XShapes >& xShapes, XMLShapeExportFlags nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */ )
+{
+    ShapesInfos::iterator aOldCurrentShapesIter = maCurrentShapesIter;
+    seekShapes( xShapes );
+
+    uno::Reference< drawing::XShape > xShape;
+    const sal_Int32 nShapeCount(xShapes->getCount());
+    for(sal_Int32 nShapeId = 0; nShapeId < nShapeCount; nShapeId++)
+    {
+        xShapes->getByIndex(nShapeId) >>= xShape;
+        SAL_WARN_IF( !xShape.is(), "xmloff", "Shape without a XShape?" );
+        if(!xShape.is())
+            continue;
+
+        exportShape( xShape, nFeatures, pRefPoint );
+    }
+
+    maCurrentShapesIter = aOldCurrentShapesIter;
+}
+
+namespace xmloff {
+
+void FixZOrder(uno::Reference<drawing::XShapes> const& xShapes,
+    std::function<unsigned int (uno::Reference<beans::XPropertySet> const&)> const& rGetLayer)
+{
+    uno::Reference<drawing::XShapes3> const xShapes3(xShapes, uno::UNO_QUERY);
+    assert(xShapes3.is());
+    if (!xShapes3.is())
+    {
+        return; // only SvxDrawPage implements this
+    }
+    struct Layer { std::vector<sal_Int32> shapes; sal_Int32 nMin = SAL_MAX_INT32; sal_Int32 nMax = 0; };
+    std::vector<Layer> layers;
+    // shapes are sorted by ZOrder
+    sal_Int32 const nCount(xShapes->getCount());
+    for (sal_Int32 i = 0; i < nCount; ++i)
+    {
+        uno::Reference<beans::XPropertySet> const xShape(xShapes->getByIndex(i), uno::UNO_QUERY);
+        if (!xShape.is())
+        {
+            SAL_WARN("xmloff", "FixZOrder: null shape, cannot sort");
+            return;
+        }
+        unsigned int const nLayer(rGetLayer(xShape));
+        if (layers.size() <= nLayer)
+        {
+            layers.resize(nLayer + 1);
+        }
+        layers[nLayer].shapes.emplace_back(i);
+        if (i < layers[nLayer].nMin)
+        {
+            layers[nLayer].nMin = i;
+        }
+        if (layers[nLayer].nMax < i)
+        {
+            layers[nLayer].nMax = i;
+        }
+    }
+    layers.erase(std::remove_if(layers.begin(), layers.end(),
+                    [](Layer const& rLayer) { return rLayer.shapes.empty(); }),
+        layers.end());
+    bool isSorted(true);
+    for (size_t i = 1; i < layers.size(); ++i)
+    {
+        assert(layers[i].nMin != layers[i-1].nMax); // unique!
+        if (layers[i].nMin < layers[i-1].nMax)
+        {
+            isSorted = false;
+            break;
+        }
+    }
+    if (isSorted)
+    {
+        return; // nothing to do
+    }
+    uno::Sequence<sal_Int32> aNewOrder(nCount);
+    auto iterInsert(aNewOrder.getArray());
+    for (auto const& rLayer : layers)
+    {
+        assert(rLayer.nMin <= rLayer.nMax); // empty layers have been removed
+        iterInsert = std::copy(rLayer.shapes.begin(), rLayer.shapes.end(), iterInsert);
+    }
+    try
+    {
+        xShapes3->sort(aNewOrder);
+    }
+    catch (uno::Exception const&)
+    {
+        SAL_WARN("xmloff", "FixZOrder: exception");
+    }
+}
+
+} // namespace xmloff
+
+void XMLShapeExport::seekShapes( const uno::Reference< drawing::XShapes >& xShapes ) noexcept
+{
+    if( xShapes.is() )
+    {
+        maCurrentShapesIter = maShapesInfos.find( xShapes );
+        if( maCurrentShapesIter == maShapesInfos.end() )
+        {
+            ImplXMLShapeExportInfoVector aNewInfoVector;
+            aNewInfoVector.resize( static_cast<ShapesInfos::size_type>(xShapes->getCount()) );
+            maShapesInfos[ xShapes ] = aNewInfoVector;
+
+            maCurrentShapesIter = maShapesInfos.find( xShapes );
+
+            SAL_WARN_IF( maCurrentShapesIter == maShapesInfos.end(), "xmloff", "XMLShapeExport::seekShapes(): insert into stl::map failed" );
+        }
+
+        SAL_WARN_IF( (*maCurrentShapesIter).second.size() != static_cast<ShapesInfos::size_type>(xShapes->getCount()), "xmloff", "XMLShapeExport::seekShapes(): XShapes size varied between calls" );
+
+    }
+    else
+    {
+        maCurrentShapesIter = maShapesInfos.end();
+    }
+}
+
+void XMLShapeExport::exportAutoStyles()
+{
+    // export all autostyle infos
+
+    // ...for graphic
+    {
+        GetExport().GetAutoStylePool()->exportXML( XmlStyleFamily::SD_GRAPHICS_ID );
+    }
+
+    // ...for presentation
+    {
+        GetExport().GetAutoStylePool()->exportXML( XmlStyleFamily::SD_PRESENTATION_ID );
+    }
+
+    if( mxShapeTableExport.is() )
+        mxShapeTableExport->exportAutoStyles();
+}
+
+/// returns the export property mapper for external chaining
+SvXMLExportPropertyMapper* XMLShapeExport::CreateShapePropMapper(
+    SvXMLExport& rExport )
+{
+    rtl::Reference< XMLPropertyHandlerFactory > xFactory = new XMLSdPropHdlFactory( rExport.GetModel(), rExport );
+    rtl::Reference < XMLPropertySetMapper > xMapper = new XMLShapePropertySetMapper( xFactory, true );
+    rExport.GetTextParagraphExport(); // get or create text paragraph export
+    SvXMLExportPropertyMapper* pResult =
+        new XMLShapeExportPropertyMapper( xMapper, rExport );
+    // chain text attributes
+    return pResult;
+}
+
+void XMLShapeExport::ImpCalcShapeType(const uno::Reference< drawing::XShape >& xShape,
+    XmlShapeType& eShapeType)
+{
+    // set in every case, so init here
+    eShapeType = XmlShapeTypeUnknown;
+
+    if(!xShape.is())
+        return;
+
+    OUString aType(xShape->getShapeType());
+
+    if(!aType.match("com.sun.star."))
+        return;
+
+    if(aType.match("drawing.", 13))
+    {
+        // drawing shapes
+        if     (aType.match("Rectangle", 21)) { eShapeType = XmlShapeTypeDrawRectangleShape; }
+
+        // #i72177# Note: Correcting CustomShape, CustomShape->Custom, len from 9 (was wrong anyways) to 6.
+        // As can be seen at the other compares, the appendix "Shape" is left out of the comparison.
+        else if(aType.match("Custom", 21)) { eShapeType = XmlShapeTypeDrawCustomShape; }
+
+        else if(aType.match("Ellipse", 21)) { eShapeType = XmlShapeTypeDrawEllipseShape; }
+        else if(aType.match("Control", 21)) { eShapeType = XmlShapeTypeDrawControlShape; }
+        else if(aType.match("Connector", 21)) { eShapeType = XmlShapeTypeDrawConnectorShape; }
+        else if(aType.match("Measure", 21)) { eShapeType = XmlShapeTypeDrawMeasureShape; }
+        else if(aType.match("Line", 21)) { eShapeType = XmlShapeTypeDrawLineShape; }
+
+        // #i72177# Note: This covers two types by purpose, PolyPolygonShape and PolyPolygonPathShape
+        else if(aType.match("PolyPolygon", 21)) { eShapeType = XmlShapeTypeDrawPolyPolygonShape; }
+
+        // #i72177# Note: This covers two types by purpose, PolyLineShape and PolyLinePathShape
+        else if(aType.match("PolyLine", 21)) { eShapeType = XmlShapeTypeDrawPolyLineShape; }
+
+        else if(aType.match("OpenBezier", 21)) { eShapeType = XmlShapeTypeDrawOpenBezierShape; }
+        else if(aType.match("ClosedBezier", 21)) { eShapeType = XmlShapeTypeDrawClosedBezierShape; }
+
+        // #i72177# FreeHand (opened and closed) now supports the types OpenFreeHandShape and
+        // ClosedFreeHandShape respectively. Represent them as bezier shapes
+        else if(aType.match("OpenFreeHand", 21)) { eShapeType = XmlShapeTypeDrawOpenBezierShape; }
+        else if(aType.match("ClosedFreeHand", 21)) { eShapeType = XmlShapeTypeDrawClosedBezierShape; }
+
+        else if(aType.match("GraphicObject", 21)) { eShapeType = XmlShapeTypeDrawGraphicObjectShape; }
+        else if(aType.match("Group", 21)) { eShapeType = XmlShapeTypeDrawGroupShape; }
+        else if(aType.match("Text", 21)) { eShapeType = XmlShapeTypeDrawTextShape; }
+        else if(aType.match("OLE2", 21))
+        {
+            eShapeType = XmlShapeTypeDrawOLE2Shape;
+
+            // get info about presentation shape
+            uno::Reference <beans::XPropertySet> xPropSet(xShape, uno::UNO_QUERY);
+
+            if(xPropSet.is())
+            {
+                OUString sCLSID;
+                if(xPropSet->getPropertyValue("CLSID") >>= sCLSID)
+                {
+#if !ENABLE_WASM_STRIP_CHART
+                    // WASM_CHART change
+                    // TODO: With Chart extracted this cannot really happen since
+                    // no Chart could've been added at all
+                    if (sCLSID == mrExport.GetChartExport()->getChartCLSID() ||
+#else
+                    if(
+#endif
+                        sCLSID == SvGlobalName( SO3_RPTCH_CLASSID ).GetHexName() )
+                    {
+                        eShapeType = XmlShapeTypeDrawChartShape;
+                    }
+                    else if (sCLSID == SvGlobalName( SO3_SC_CLASSID ).GetHexName() )
+                    {
+                        eShapeType = XmlShapeTypeDrawSheetShape;
+                    }
+                    else
+                    {
+                        // general OLE2 Object
+                    }
+                }
+            }
+        }
+        else if(aType.match("Page", 21)) { eShapeType = XmlShapeTypeDrawPageShape; }
+        else if(aType.match("Frame", 21)) { eShapeType = XmlShapeTypeDrawFrameShape; }
+        else if(aType.match("Caption", 21)) { eShapeType = XmlShapeTypeDrawCaptionShape; }
+        else if(aType.match("Plugin", 21)) { eShapeType = XmlShapeTypeDrawPluginShape; }
+        else if(aType.match("Applet", 21)) { eShapeType = XmlShapeTypeDrawAppletShape; }
+        else if(aType.match("MediaShape", 21)) { eShapeType = XmlShapeTypeDrawMediaShape; }
+        else if(aType.match("TableShape", 21)) { eShapeType = XmlShapeTypeDrawTableShape; }
+
+        // 3D shapes
+        else if(aType.match("Scene", 21 + 7)) { eShapeType = XmlShapeTypeDraw3DSceneObject; }
+        else if(aType.match("Cube", 21 + 7)) { eShapeType = XmlShapeTypeDraw3DCubeObject; }
+        else if(aType.match("Sphere", 21 + 7)) { eShapeType = XmlShapeTypeDraw3DSphereObject; }
+        else if(aType.match("Lathe", 21 + 7)) { eShapeType = XmlShapeTypeDraw3DLatheObject; }
+        else if(aType.match("Extrude", 21 + 7)) { eShapeType = XmlShapeTypeDraw3DExtrudeObject; }
+    }
+    else if(aType.match("presentation.", 13))
+    {
+        // presentation shapes
+        if     (aType.match("TitleText", 26)) { eShapeType = XmlShapeTypePresTitleTextShape; }
+        else if(aType.match("Outliner", 26)) { eShapeType = XmlShapeTypePresOutlinerShape;  }
+        else if(aType.match("Subtitle", 26)) { eShapeType = XmlShapeTypePresSubtitleShape;  }
+        else if(aType.match("GraphicObject", 26)) { eShapeType = XmlShapeTypePresGraphicObjectShape;  }
+        else if(aType.match("Page", 26)) { eShapeType = XmlShapeTypePresPageShape;  }
+        else if(aType.match("OLE2", 26))
+        {
+            eShapeType = XmlShapeTypePresOLE2Shape;
+
+            // get info about presentation shape
+            uno::Reference <beans::XPropertySet> xPropSet(xShape, uno::UNO_QUERY);
+
+            if(xPropSet.is()) try
+            {
+                OUString sCLSID;
+                if(xPropSet->getPropertyValue("CLSID") >>= sCLSID)
+                {
+                    if( sCLSID == SvGlobalName( SO3_SC_CLASSID ).GetHexName() )
+                    {
+                        eShapeType = XmlShapeTypePresSheetShape;
+                    }
+                }
+            }
+            catch(const uno::Exception&)
+            {
+                SAL_WARN( "xmloff", "XMLShapeExport::ImpCalcShapeType(), expected ole shape to have the CLSID property?" );
+            }
+        }
+        else if(aType.match("Chart", 26)) { eShapeType = XmlShapeTypePresChartShape;  }
+        else if(aType.match("OrgChart", 26)) { eShapeType = XmlShapeTypePresOrgChartShape;  }
+        else if(aType.match("CalcShape", 26)) { eShapeType = XmlShapeTypePresSheetShape; }
+        else if(aType.match("TableShape", 26)) { eShapeType = XmlShapeTypePresTableShape; }
+        else if(aType.match("Notes", 26)) { eShapeType = XmlShapeTypePresNotesShape;  }
+        else if(aType.match("HandoutShape", 26)) { eShapeType = XmlShapeTypeHandoutShape; }
+        else if(aType.match("HeaderShape", 26)) { eShapeType = XmlShapeTypePresHeaderShape; }
+        else if(aType.match("FooterShape", 26)) { eShapeType = XmlShapeTypePresFooterShape; }
+        else if(aType.match("SlideNumberShape", 26)) { eShapeType = XmlShapeTypePresSlideNumberShape; }
+        else if(aType.match("DateTimeShape", 26)) { eShapeType = XmlShapeTypePresDateTimeShape; }
+        else if(aType.match("MediaShape", 26)) { eShapeType = XmlShapeTypePresMediaShape; }
+    }
+}
+
+/** exports all user defined gluepoints */
+void XMLShapeExport::ImpExportGluePoints( const uno::Reference< drawing::XShape >& xShape )
+{
+    uno::Reference< drawing::XGluePointsSupplier > xSupplier( xShape, uno::UNO_QUERY );
+    if( !xSupplier.is() )
+        return;
+
+    uno::Reference< container::XIdentifierAccess > xGluePoints( xSupplier->getGluePoints(), uno::UNO_QUERY );
+    if( !xGluePoints.is() )
+        return;
+
+    drawing::GluePoint2 aGluePoint;
+
+    const uno::Sequence< sal_Int32 > aIdSequence( xGluePoints->getIdentifiers() );
+
+    for( const sal_Int32 nIdentifier : aIdSequence )
+    {
+        if( (xGluePoints->getByIdentifier( nIdentifier ) >>= aGluePoint) && aGluePoint.IsUserDefined )
+        {
+            // export only user defined gluepoints
+
+            const OUString sId( OUString::number( nIdentifier ) );
+            mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_ID, sId );
+
+            mrExport.GetMM100UnitConverter().convertMeasureToXML(msBuffer,
+                    aGluePoint.Position.X);
+            mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X, msBuffer.makeStringAndClear());
+
+            mrExport.GetMM100UnitConverter().convertMeasureToXML(msBuffer,
+                    aGluePoint.Position.Y);
+            mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y, msBuffer.makeStringAndClear());
+
+            if( !aGluePoint.IsRelative )
+            {
+                SvXMLUnitConverter::convertEnum( msBuffer, aGluePoint.PositionAlignment, aXML_GlueAlignment_EnumMap );
+                mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_ALIGN, msBuffer.makeStringAndClear() );
+            }
+
+            if( aGluePoint.Escape != drawing::EscapeDirection_SMART )
+            {
+                SvXMLUnitConverter::convertEnum( msBuffer, aGluePoint.Escape, aXML_GlueEscapeDirection_EnumMap );
+                mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_ESCAPE_DIRECTION, msBuffer.makeStringAndClear() );
+            }
+
+            SvXMLElementExport aEventsElemt(mrExport, XML_NAMESPACE_DRAW, XML_GLUE_POINT, true, true);
+        }
+    }
+}
+
+void XMLShapeExport::ImpExportSignatureLine(const uno::Reference<drawing::XShape>& xShape)
+{
+    uno::Reference<beans::XPropertySet> xPropSet(xShape, uno::UNO_QUERY);
+
+    bool bIsSignatureLine = false;
+    xPropSet->getPropertyValue("IsSignatureLine") >>= bIsSignatureLine;
+    if (!bIsSignatureLine)
+        return;
+
+    OUString aSignatureLineId;
+    xPropSet->getPropertyValue("SignatureLineId") >>= aSignatureLineId;
+    mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_ID, aSignatureLineId);
+
+    OUString aSuggestedSignerName;
+    xPropSet->getPropertyValue("SignatureLineSuggestedSignerName") >>= aSuggestedSignerName;
+    if (!aSuggestedSignerName.isEmpty())
+        mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_SUGGESTED_SIGNER_NAME, aSuggestedSignerName);
+
+    OUString aSuggestedSignerTitle;
+    xPropSet->getPropertyValue("SignatureLineSuggestedSignerTitle") >>= aSuggestedSignerTitle;
+    if (!aSuggestedSignerTitle.isEmpty())
+        mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_SUGGESTED_SIGNER_TITLE, aSuggestedSignerTitle);
+
+    OUString aSuggestedSignerEmail;
+    xPropSet->getPropertyValue("SignatureLineSuggestedSignerEmail") >>= aSuggestedSignerEmail;
+    if (!aSuggestedSignerEmail.isEmpty())
+        mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_SUGGESTED_SIGNER_EMAIL, aSuggestedSignerEmail);
+
+    OUString aSigningInstructions;
+    xPropSet->getPropertyValue("SignatureLineSigningInstructions") >>= aSigningInstructions;
+    if (!aSigningInstructions.isEmpty())
+        mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_SIGNING_INSTRUCTIONS, aSigningInstructions);
+
+    bool bShowSignDate = false;
+    xPropSet->getPropertyValue("SignatureLineShowSignDate") >>= bShowSignDate;
+    mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_SHOW_SIGN_DATE,
+                          bShowSignDate ? XML_TRUE : XML_FALSE);
+
+    bool bCanAddComment = false;
+    xPropSet->getPropertyValue("SignatureLineCanAddComment") >>= bCanAddComment;
+    mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_CAN_ADD_COMMENT,
+                          bCanAddComment ? XML_TRUE : XML_FALSE);
+
+    SvXMLElementExport aSignatureLineElement(mrExport, XML_NAMESPACE_LO_EXT, XML_SIGNATURELINE, true,
+                                             true);
+}
+
+void XMLShapeExport::ImpExportQRCode(const uno::Reference<drawing::XShape>& xShape)
+{
+    uno::Reference<beans::XPropertySet> xPropSet(xShape, uno::UNO_QUERY);
+
+    uno::Any aAny = xPropSet->getPropertyValue("BarCodeProperties");
+
+    css::drawing::BarCode aBarCode;
+    if(!(aAny >>= aBarCode))
+        return;
+
+    mrExport.AddAttribute(XML_NAMESPACE_OFFICE, XML_STRING_VALUE, aBarCode.Payload);
+    /* Export QR Code as per customised schema, @see OpenDocument-schema-v1.3+libreoffice */
+    OUString temp;
+    switch(aBarCode.ErrorCorrection){
+        case css::drawing::BarCodeErrorCorrection::LOW :
+            temp = "low";
+            break;
+        case css::drawing::BarCodeErrorCorrection::MEDIUM:
+            temp = "medium";
+            break;
+        case css::drawing::BarCodeErrorCorrection::QUARTILE:
+            temp = "quartile";
+            break;
+        case css::drawing::BarCodeErrorCorrection::HIGH:
+            temp = "high";
+            break;
+    }
+    mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_QRCODE_ERROR_CORRECTION, temp);
+    mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_QRCODE_BORDER, OUStringBuffer(20).append(aBarCode.Border).makeStringAndClear());
+    mrExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_QRCODE_TYPE, OUStringBuffer(20).append(aBarCode.Type).makeStringAndClear());
+
+    SvXMLElementExport aBarCodeElement(mrExport, XML_NAMESPACE_LO_EXT, XML_QRCODE, true,
+                                            true);
+}
+
+void XMLShapeExport::ExportGraphicDefaults()
+{
+    rtl::Reference<XMLStyleExport> aStEx(new XMLStyleExport(mrExport, mrExport.GetAutoStylePool().get()));
+
+    // construct PropertySetMapper
+    rtl::Reference< SvXMLExportPropertyMapper > xPropertySetMapper( CreateShapePropMapper( mrExport ) );
+    static_cast<XMLShapeExportPropertyMapper*>(xPropertySetMapper.get())->SetAutoStyles( false );
+
+    // chain text attributes
+    xPropertySetMapper->ChainExportMapper(XMLTextParagraphExport::CreateParaExtPropMapper(mrExport));
+
+    // chain special Writer/text frame default attributes
+    xPropertySetMapper->ChainExportMapper(XMLTextParagraphExport::CreateParaDefaultExtPropMapper(mrExport));
+
+    // write graphic family default style
+    uno::Reference< lang::XMultiServiceFactory > xFact( mrExport.GetModel(), uno::UNO_QUERY );
+    if( !xFact.is() )
+        return;
+
+    try
+    {
+        uno::Reference< beans::XPropertySet > xDefaults( xFact->createInstance("com.sun.star.drawing.Defaults"), uno::UNO_QUERY );
+        if( xDefaults.is() )
+        {
+            aStEx->exportDefaultStyle( xDefaults, XML_STYLE_FAMILY_SD_GRAPHICS_NAME, xPropertySetMapper );
+
+            // write graphic family styles
+            aStEx->exportStyleFamily("graphics", OUString(XML_STYLE_FAMILY_SD_GRAPHICS_NAME), xPropertySetMapper, false, XmlStyleFamily::SD_GRAPHICS_ID);
+        }
+    }
+    catch(const lang::ServiceNotRegisteredException&)
+    {
+    }
+}
+
+void XMLShapeExport::onExport( const css::uno::Reference < css::drawing::XShape >& )
+{
+}
+
+const rtl::Reference< XMLTableExport >& XMLShapeExport::GetShapeTableExport()
+{
+    if( !mxShapeTableExport.is() )
+    {
+        rtl::Reference< XMLPropertyHandlerFactory > xFactory( new XMLSdPropHdlFactory( mrExport.GetModel(), mrExport ) );
+        rtl::Reference < XMLPropertySetMapper > xMapper( new XMLShapePropertySetMapper( xFactory, true ) );
+        mrExport.GetTextParagraphExport(); // get or create text paragraph export
+        rtl::Reference< SvXMLExportPropertyMapper > xPropertySetMapper( new XMLShapeExportPropertyMapper( xMapper, mrExport ) );
+        mxShapeTableExport = new XMLTableExport( mrExport, xPropertySetMapper, xFactory );
+    }
+
+    return mxShapeTableExport;
+}
+
+void XMLShapeExport::ImpExportNewTrans(const uno::Reference< beans::XPropertySet >& xPropSet,
+    XMLShapeExportFlags nFeatures, awt::Point* pRefPoint)
+{
+    // get matrix
+    ::basegfx::B2DHomMatrix aMatrix;
+    ImpExportNewTrans_GetB2DHomMatrix(aMatrix, xPropSet);
+
+    // decompose and correct about pRefPoint
+    ::basegfx::B2DTuple aTRScale;
+    double fTRShear(0.0);
+    double fTRRotate(0.0);
+    ::basegfx::B2DTuple aTRTranslate;
+    ImpExportNewTrans_DecomposeAndRefPoint(aMatrix, aTRScale, fTRShear, fTRRotate, aTRTranslate, pRefPoint);
+
+    // use features and write
+    ImpExportNewTrans_FeaturesAndWrite(aTRScale, fTRShear, fTRRotate, aTRTranslate, nFeatures);
+}
+
+void XMLShapeExport::ImpExportNewTrans_GetB2DHomMatrix(::basegfx::B2DHomMatrix& rMatrix,
+    const uno::Reference< beans::XPropertySet >& xPropSet)
+{
+    /* Get <TransformationInHoriL2R>, if it exist
+       and if the document is exported into the OpenOffice.org file format.
+       This property only exists at service css::text::Shape - the
+       Writer UNO service for shapes.
+       This code is needed, because the positioning attributes in the
+       OpenOffice.org file format are given in horizontal left-to-right layout
+       regardless the layout direction the shape is in. In the OASIS Open Office
+       file format the positioning attributes are correctly given in the layout
+       direction the shape is in. Thus, this code provides the conversion from
+       the OASIS Open Office file format to the OpenOffice.org file format. (#i28749#)
+    */
+    uno::Any aAny;
+    if ( !( GetExport().getExportFlags() & SvXMLExportFlags::OASIS ) &&
+         xPropSet->getPropertySetInfo()->hasPropertyByName("TransformationInHoriL2R") )
+    {
+        aAny = xPropSet->getPropertyValue("TransformationInHoriL2R");
+    }
+    else
+    {
+        aAny = xPropSet->getPropertyValue("Transformation");
+    }
+    drawing::HomogenMatrix3 aMatrix;
+    aAny >>= aMatrix;
+
+    rMatrix.set(0, 0, aMatrix.Line1.Column1);
+    rMatrix.set(0, 1, aMatrix.Line1.Column2);
+    rMatrix.set(0, 2, aMatrix.Line1.Column3);
+    rMatrix.set(1, 0, aMatrix.Line2.Column1);
+    rMatrix.set(1, 1, aMatrix.Line2.Column2);
+    rMatrix.set(1, 2, aMatrix.Line2.Column3);
+    rMatrix.set(2, 0, aMatrix.Line3.Column1);
+    rMatrix.set(2, 1, aMatrix.Line3.Column2);
+    rMatrix.set(2, 2, aMatrix.Line3.Column3);
+}
+
+void XMLShapeExport::ImpExportNewTrans_DecomposeAndRefPoint(const ::basegfx::B2DHomMatrix& rMatrix, ::basegfx::B2DTuple& rTRScale,
+    double& fTRShear, double& fTRRotate, ::basegfx::B2DTuple& rTRTranslate, css::awt::Point* pRefPoint)
+{
+    // decompose matrix
+    rMatrix.decompose(rTRScale, rTRTranslate, fTRRotate, fTRShear);
+
+    // correct translation about pRefPoint
+    if(pRefPoint)
+    {
+        rTRTranslate -= ::basegfx::B2DTuple(pRefPoint->X, pRefPoint->Y);
+    }
+}
+
+void XMLShapeExport::ImpExportNewTrans_FeaturesAndWrite(::basegfx::B2DTuple const & rTRScale, double fTRShear,
+    double fTRRotate, ::basegfx::B2DTuple const & rTRTranslate, const XMLShapeExportFlags nFeatures)
+{
+    // always write Size (rTRScale) since this statement carries the union
+    // of the object
+    OUString aStr;
+    OUStringBuffer sStringBuffer;
+    ::basegfx::B2DTuple aTRScale(rTRScale);
+
+    // svg: width
+    if(!(nFeatures & XMLShapeExportFlags::WIDTH))
+    {
+        aTRScale.setX(1.0);
+    }
+    else
+    {
+        if( aTRScale.getX() > 0.0 )
+            aTRScale.setX(aTRScale.getX() - 1.0);
+        else if( aTRScale.getX() < 0.0 )
+            aTRScale.setX(aTRScale.getX() + 1.0);
+    }
+
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+            FRound(aTRScale.getX()));
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_WIDTH, aStr);
+
+    // svg: height
+    if(!(nFeatures & XMLShapeExportFlags::HEIGHT))
+    {
+        aTRScale.setY(1.0);
+    }
+    else
+    {
+        if( aTRScale.getY() > 0.0 )
+            aTRScale.setY(aTRScale.getY() - 1.0);
+        else if( aTRScale.getY() < 0.0 )
+            aTRScale.setY(aTRScale.getY() + 1.0);
+    }
+
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+            FRound(aTRScale.getY()));
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_HEIGHT, aStr);
+
+    // decide if transformation is necessary
+    bool bTransformationIsNecessary(fTRShear != 0.0 || fTRRotate != 0.0);
+
+    if(bTransformationIsNecessary)
+    {
+        // write transformation, but WITHOUT scale which is exported as size above
+        SdXMLImExTransform2D aTransform;
+
+        aTransform.AddSkewX(atan(fTRShear));
+
+        // #i78696#
+        // fTRRotate is mathematically correct, but due to the error
+        // we export/import it mirrored. Since the API implementation is fixed and
+        // uses the correctly oriented angle, it is necessary for compatibility to
+        // mirror the angle here to stay at the old behaviour. There is a follow-up
+        // task (#i78698#) to fix this in the next ODF FileFormat version
+        aTransform.AddRotate(-fTRRotate);
+
+        aTransform.AddTranslate(rTRTranslate);
+
+        // does transformation need to be exported?
+        if(aTransform.NeedsAction())
+            mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_TRANSFORM, aTransform.GetExportString(mrExport.GetMM100UnitConverter()));
+    }
+    else
+    {
+        // no shear, no rotate; just add object position to export and we are done
+        if(nFeatures & XMLShapeExportFlags::X)
+        {
+            // svg: x
+            mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                    FRound(rTRTranslate.getX()));
+            aStr = sStringBuffer.makeStringAndClear();
+            mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X, aStr);
+        }
+
+        if(nFeatures & XMLShapeExportFlags::Y)
+        {
+            // svg: y
+            mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                    FRound(rTRTranslate.getY()));
+            aStr = sStringBuffer.makeStringAndClear();
+            mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y, aStr);
+        }
+    }
+}
+
+bool XMLShapeExport::ImpExportPresentationAttributes( const uno::Reference< beans::XPropertySet >& xPropSet, const OUString& rClass )
+{
+    bool bIsEmpty = false;
+
+    // write presentation class entry
+    mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_CLASS, rClass);
+
+    if( xPropSet.is() )
+    {
+        uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() );
+
+
+        // is empty pres. shape?
+        if( xPropSetInfo.is() && xPropSetInfo->hasPropertyByName("IsEmptyPresentationObject"))
+        {
+            xPropSet->getPropertyValue("IsEmptyPresentationObject") >>= bIsEmpty;
+            if( bIsEmpty )
+                mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_PLACEHOLDER, XML_TRUE);
+        }
+
+        // is user-transformed?
+        if( xPropSetInfo.is() && xPropSetInfo->hasPropertyByName("IsPlaceholderDependent"))
+        {
+            bool bTemp = false;
+            xPropSet->getPropertyValue("IsPlaceholderDependent") >>= bTemp;
+            if(!bTemp)
+                mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_USER_TRANSFORMED, XML_TRUE);
+        }
+    }
+
+    return bIsEmpty;
+}
+
+void XMLShapeExport::ImpExportText( const uno::Reference< drawing::XShape >& xShape, TextPNS eExtensionNS )
+{
+    if (eExtensionNS == TextPNS::EXTENSION)
+    {
+        if ((mrExport.getSaneDefaultVersion() & SvtSaveOptions::ODFSVER_EXTENDED) == 0)
+        {
+            return; // do not export to ODF 1.1/1.2/1.3
+        }
+    }
+    uno::Reference< text::XText > xText( xShape, uno::UNO_QUERY );
+    if( xText.is() )
+    {
+        uno::Reference< container::XEnumerationAccess > xEnumAccess( xShape, uno::UNO_QUERY );
+        if( xEnumAccess.is() && xEnumAccess->hasElements() )
+            mrExport.GetTextParagraphExport()->exportText( xText, false, true, eExtensionNS );
+    }
+}
+
+namespace {
+
+enum class Found {
+    NONE              = 0x0000,
+    CLICKACTION       = 0x0001,
+    BOOKMARK          = 0x0002,
+    EFFECT            = 0x0004,
+    PLAYFULL          = 0x0008,
+    VERB              = 0x0010,
+    SOUNDURL          = 0x0020,
+    SPEED             = 0x0040,
+    CLICKEVENTTYPE    = 0x0080,
+    MACRO             = 0x0100,
+    LIBRARY           = 0x0200,
+};
+
+}
+
+namespace o3tl {
+    template<> struct typed_flags<Found> : is_typed_flags<Found, 0x03ff> {};
+}
+
+void XMLShapeExport::ImpExportEvents( const uno::Reference< drawing::XShape >& xShape )
+{
+    uno::Reference< document::XEventsSupplier > xEventsSupplier( xShape, uno::UNO_QUERY );
+    if( !xEventsSupplier.is() )
+        return;
+
+    uno::Reference< container::XNameAccess > xEvents = xEventsSupplier->getEvents();
+    SAL_WARN_IF( !xEvents.is(), "xmloff", "XEventsSupplier::getEvents() returned NULL" );
+    if( !xEvents.is() )
+        return;
+
+    Found nFound = Found::NONE;
+
+    OUString aClickEventType;
+    presentation::ClickAction eClickAction = presentation::ClickAction_NONE;
+    presentation::AnimationEffect eEffect = presentation::AnimationEffect_NONE;
+    presentation::AnimationSpeed eSpeed = presentation::AnimationSpeed_SLOW;
+    OUString aStrSoundURL;
+    bool bPlayFull = false;
+    sal_Int32 nVerb = 0;
+    OUString aStrMacro;
+    OUString aStrLibrary;
+    OUString aStrBookmark;
+
+    uno::Sequence< beans::PropertyValue > aClickProperties;
+    if( xEvents->hasByName( gsOnClick ) && (xEvents->getByName( gsOnClick ) >>= aClickProperties) )
+    {
+        for( const auto& rProperty : std::as_const(aClickProperties) )
+        {
+            if( !( nFound & Found::CLICKEVENTTYPE ) && rProperty.Name == gsEventType )
+            {
+                if( rProperty.Value >>= aClickEventType )
+                    nFound |= Found::CLICKEVENTTYPE;
+            }
+            else if( !( nFound & Found::CLICKACTION ) && rProperty.Name == gsClickAction )
+            {
+                if( rProperty.Value >>= eClickAction )
+                    nFound |= Found::CLICKACTION;
+            }
+            else if( !( nFound & Found::MACRO ) && ( rProperty.Name == gsMacroName || rProperty.Name == gsScript ) )
+            {
+                if( rProperty.Value >>= aStrMacro )
+                    nFound |= Found::MACRO;
+            }
+            else if( !( nFound & Found::LIBRARY ) && rProperty.Name == gsLibrary )
+            {
+                if( rProperty.Value >>= aStrLibrary )
+                    nFound |= Found::LIBRARY;
+            }
+            else if( !( nFound & Found::EFFECT ) && rProperty.Name == gsEffect )
+            {
+                if( rProperty.Value >>= eEffect )
+                    nFound |= Found::EFFECT;
+            }
+            else if( !( nFound & Found::BOOKMARK ) && rProperty.Name == gsBookmark )
+            {
+                if( rProperty.Value >>= aStrBookmark )
+                    nFound |= Found::BOOKMARK;
+            }
+            else if( !( nFound & Found::SPEED ) && rProperty.Name == gsSpeed )
+            {
+                if( rProperty.Value >>= eSpeed )
+                    nFound |= Found::SPEED;
+            }
+            else if( !( nFound & Found::SOUNDURL ) && rProperty.Name == gsSoundURL )
+            {
+                if( rProperty.Value >>= aStrSoundURL )
+                    nFound |= Found::SOUNDURL;
+            }
+            else if( !( nFound & Found::PLAYFULL ) && rProperty.Name == gsPlayFull )
+            {
+                if( rProperty.Value >>= bPlayFull )
+                    nFound |= Found::PLAYFULL;
+            }
+            else if( !( nFound & Found::VERB ) && rProperty.Name == gsVerb )
+            {
+                if( rProperty.Value >>= nVerb )
+                    nFound |= Found::VERB;
+            }
+        }
+    }
+
+    // create the XML elements
+
+    if( aClickEventType == gsPresentation )
+    {
+        if( !(nFound & Found::CLICKACTION) || (eClickAction == presentation::ClickAction_NONE) )
+            return;
+
+        SvXMLElementExport aEventsElemt(mrExport, XML_NAMESPACE_OFFICE, XML_EVENT_LISTENERS, true, true);
+
+        enum XMLTokenEnum eStrAction;
+
+        switch( eClickAction )
+        {
+            case presentation::ClickAction_PREVPAGE:        eStrAction = XML_PREVIOUS_PAGE; break;
+            case presentation::ClickAction_NEXTPAGE:        eStrAction = XML_NEXT_PAGE; break;
+            case presentation::ClickAction_FIRSTPAGE:       eStrAction = XML_FIRST_PAGE; break;
+            case presentation::ClickAction_LASTPAGE:        eStrAction = XML_LAST_PAGE; break;
+            case presentation::ClickAction_INVISIBLE:       eStrAction = XML_HIDE; break;
+            case presentation::ClickAction_STOPPRESENTATION:eStrAction = XML_STOP; break;
+            case presentation::ClickAction_PROGRAM:         eStrAction = XML_EXECUTE; break;
+            case presentation::ClickAction_BOOKMARK:        eStrAction = XML_SHOW; break;
+            case presentation::ClickAction_DOCUMENT:        eStrAction = XML_SHOW; break;
+            case presentation::ClickAction_MACRO:           eStrAction = XML_EXECUTE_MACRO; break;
+            case presentation::ClickAction_VERB:            eStrAction = XML_VERB; break;
+            case presentation::ClickAction_VANISH:          eStrAction = XML_FADE_OUT; break;
+            case presentation::ClickAction_SOUND:           eStrAction = XML_SOUND; break;
+            default:
+                OSL_FAIL( "unknown presentation::ClickAction found!" );
+                eStrAction = XML_UNKNOWN;
+        }
+
+        OUString aEventQName(
+            mrExport.GetNamespaceMap().GetQNameByKey(
+                    XML_NAMESPACE_DOM, "click" ) );
+        mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_EVENT_NAME, aEventQName );
+        mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_ACTION, eStrAction );
+
+        if( eClickAction == presentation::ClickAction_VANISH )
+        {
+            if( nFound & Found::EFFECT )
+            {
+                XMLEffect eKind;
+                XMLEffectDirection eDirection;
+                sal_Int16 nStartScale;
+                bool bIn;
+
+                SdXMLImplSetEffect( eEffect, eKind, eDirection, nStartScale, bIn );
+
+                if( eKind != EK_none )
+                {
+                    SvXMLUnitConverter::convertEnum( msBuffer, eKind, aXML_AnimationEffect_EnumMap );
+                    mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_EFFECT, msBuffer.makeStringAndClear() );
+                }
+
+                if( eDirection != ED_none )
+                {
+                    SvXMLUnitConverter::convertEnum( msBuffer, eDirection, aXML_AnimationDirection_EnumMap );
+                    mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_DIRECTION, msBuffer.makeStringAndClear() );
+                }
+
+                if( nStartScale != -1 )
+                {
+                    ::sax::Converter::convertPercent( msBuffer, nStartScale );
+                    mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_START_SCALE, msBuffer.makeStringAndClear() );
+                }
+            }
+
+            if( nFound & Found::SPEED && eEffect != presentation::AnimationEffect_NONE )
+            {
+                if( eSpeed != presentation::AnimationSpeed_MEDIUM )
+                {
+                    SvXMLUnitConverter::convertEnum( msBuffer, eSpeed, aXML_AnimationSpeed_EnumMap );
+                    mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_SPEED, msBuffer.makeStringAndClear() );
+                }
+            }
+        }
+
+        if( eClickAction == presentation::ClickAction_PROGRAM ||
+            eClickAction == presentation::ClickAction_BOOKMARK ||
+            eClickAction == presentation::ClickAction_DOCUMENT )
+        {
+            if( eClickAction == presentation::ClickAction_BOOKMARK )
+                msBuffer.append( '#' );
+
+            msBuffer.append( aStrBookmark );
+            mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(msBuffer.makeStringAndClear()) );
+            mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+            mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+            mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONREQUEST );
+        }
+
+        if( ( nFound & Found::VERB ) && eClickAction == presentation::ClickAction_VERB )
+        {
+            msBuffer.append( nVerb );
+            mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_VERB, msBuffer.makeStringAndClear());
+        }
+
+        SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_PRESENTATION, XML_EVENT_LISTENER, true, true);
+
+        if( eClickAction == presentation::ClickAction_VANISH || eClickAction == presentation::ClickAction_SOUND )
+        {
+            if( ( nFound & Found::SOUNDURL ) && !aStrSoundURL.isEmpty() )
+            {
+                mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(aStrSoundURL) );
+                mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+                mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_NEW );
+                mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONREQUEST );
+                if( nFound & Found::PLAYFULL && bPlayFull )
+                    mrExport.AddAttribute( XML_NAMESPACE_PRESENTATION, XML_PLAY_FULL, XML_TRUE );
+
+                SvXMLElementExport aElem( mrExport, XML_NAMESPACE_PRESENTATION, XML_SOUND, true, true );
+            }
+        }
+    }
+    else if( aClickEventType == gsStarBasic )
+    {
+        if( nFound & Found::MACRO )
+        {
+            SvXMLElementExport aEventsElemt(mrExport, XML_NAMESPACE_OFFICE, XML_EVENT_LISTENERS, true, true);
+
+            mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_LANGUAGE,
+                        mrExport.GetNamespaceMap().GetQNameByKey(
+                            XML_NAMESPACE_OOO,
+                            "starbasic" ) );
+            OUString aEventQName(
+                mrExport.GetNamespaceMap().GetQNameByKey(
+                        XML_NAMESPACE_DOM, "click" ) );
+            mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_EVENT_NAME, aEventQName );
+
+            if( nFound & Found::LIBRARY )
+            {
+                const OUString& sLocation( GetXMLToken(
+                    (aStrLibrary.equalsIgnoreAsciiCase("StarOffice") ||
+                     aStrLibrary.equalsIgnoreAsciiCase("application") ) ? XML_APPLICATION
+                                                                       : XML_DOCUMENT ) );
+                mrExport.AddAttribute(XML_NAMESPACE_SCRIPT, XML_MACRO_NAME,
+                    sLocation + ":" + aStrMacro);
+            }
+            else
+            {
+                mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_MACRO_NAME, aStrMacro );
+            }
+
+            SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_SCRIPT, XML_EVENT_LISTENER, true, true);
+        }
+    }
+    else if( aClickEventType == gsScript )
+    {
+        if( nFound & Found::MACRO )
+        {
+            SvXMLElementExport aEventsElemt(mrExport, XML_NAMESPACE_OFFICE, XML_EVENT_LISTENERS, true, true);
+
+            mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_LANGUAGE, mrExport.GetNamespaceMap().GetQNameByKey(
+                     XML_NAMESPACE_OOO, GetXMLToken(XML_SCRIPT) ) );
+            OUString aEventQName(
+                mrExport.GetNamespaceMap().GetQNameByKey(
+                        XML_NAMESPACE_DOM, "click" ) );
+            mrExport.AddAttribute( XML_NAMESPACE_SCRIPT, XML_EVENT_NAME, aEventQName );
+            mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_HREF, aStrMacro );
+            mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, "simple" );
+
+            SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_SCRIPT, XML_EVENT_LISTENER, true, true);
+        }
+    }
+}
+
+/** #i68101# export shape Title and Description */
+void XMLShapeExport::ImpExportDescription( const uno::Reference< drawing::XShape >& xShape )
+{
+    try
+    {
+        OUString aTitle;
+        OUString aDescription;
+
+        uno::Reference< beans::XPropertySet > xProps( xShape, uno::UNO_QUERY_THROW );
+        xProps->getPropertyValue("Title") >>= aTitle;
+        xProps->getPropertyValue("Description") >>= aDescription;
+
+        if(!aTitle.isEmpty())
+        {
+            SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_SVG, XML_TITLE, true, false);
+            mrExport.Characters( aTitle );
+        }
+
+        if(!aDescription.isEmpty())
+        {
+            SvXMLElementExport aEventElemt(mrExport, XML_NAMESPACE_SVG, XML_DESC, true, false );
+            mrExport.Characters( aDescription );
+        }
+    }
+    catch( uno::Exception& )
+    {
+        DBG_UNHANDLED_EXCEPTION( "xmloff", "exporting Title and/or Description for shape" );
+    }
+}
+
+void XMLShapeExport::ImpExportGroupShape( const uno::Reference< drawing::XShape >& xShape, XMLShapeExportFlags nFeatures, awt::Point* pRefPoint)
+{
+    uno::Reference< drawing::XShapes > xShapes(xShape, uno::UNO_QUERY);
+    if(!(xShapes.is() && xShapes->getCount()))
+        return;
+
+    // write group shape
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aPGR(mrExport, XML_NAMESPACE_DRAW, XML_G, bCreateNewline, true);
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+
+    // #89764# if export of position is suppressed for group shape,
+    // positions of contained objects should be written relative to
+    // the upper left edge of the group.
+    awt::Point aUpperLeft;
+
+    if(!(nFeatures & XMLShapeExportFlags::POSITION))
+    {
+        nFeatures |= XMLShapeExportFlags::POSITION;
+        aUpperLeft = xShape->getPosition();
+        pRefPoint = &aUpperLeft;
+    }
+
+    // write members
+    exportShapes( xShapes, nFeatures, pRefPoint );
+}
+
+void XMLShapeExport::ImpExportTextBoxShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XmlShapeType eShapeType, XMLShapeExportFlags nFeatures, awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    // presentation attribute (if presentation)
+    bool bIsPresShape(false);
+    bool bIsEmptyPresObj(false);
+    OUString aStr;
+
+    switch(eShapeType)
+    {
+        case XmlShapeTypePresSubtitleShape:
+        {
+            aStr = GetXMLToken(XML_SUBTITLE);
+            bIsPresShape = true;
+            break;
+        }
+        case XmlShapeTypePresTitleTextShape:
+        {
+            aStr = GetXMLToken(XML_TITLE);
+            bIsPresShape = true;
+            break;
+        }
+        case XmlShapeTypePresOutlinerShape:
+        {
+            aStr = GetXMLToken(XML_PRESENTATION_OUTLINE);
+            bIsPresShape = true;
+            break;
+        }
+        case XmlShapeTypePresNotesShape:
+        {
+            aStr = GetXMLToken(XML_NOTES);
+            bIsPresShape = true;
+            break;
+        }
+        case XmlShapeTypePresHeaderShape:
+        {
+            aStr = GetXMLToken(XML_HEADER);
+            bIsPresShape = true;
+            break;
+        }
+        case XmlShapeTypePresFooterShape:
+        {
+            aStr = GetXMLToken(XML_FOOTER);
+            bIsPresShape = true;
+            break;
+        }
+        case XmlShapeTypePresSlideNumberShape:
+        {
+            aStr = GetXMLToken(XML_PAGE_NUMBER);
+            bIsPresShape = true;
+            break;
+        }
+        case XmlShapeTypePresDateTimeShape:
+        {
+            aStr = GetXMLToken(XML_DATE_TIME);
+            bIsPresShape = true;
+            break;
+        }
+        default:
+            break;
+    }
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    if(bIsPresShape)
+        bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, aStr );
+
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW,
+                              XML_FRAME, bCreateNewline, true );
+
+    // evtl. corner radius?
+    sal_Int32 nCornerRadius(0);
+    xPropSet->getPropertyValue("CornerRadius") >>= nCornerRadius;
+    if(nCornerRadius)
+    {
+        OUStringBuffer sStringBuffer;
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                nCornerRadius);
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_CORNER_RADIUS, sStringBuffer.makeStringAndClear());
+    }
+
+    {
+        // write text-box
+        SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_TEXT_BOX, true, true);
+        if(!bIsEmptyPresObj)
+            ImpExportText( xShape );
+    }
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+
+}
+
+void XMLShapeExport::ImpExportRectangleShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures, css::awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    // evtl. corner radius?
+    sal_Int32 nCornerRadius(0);
+    xPropSet->getPropertyValue("CornerRadius") >>= nCornerRadius;
+    if(nCornerRadius)
+    {
+        OUStringBuffer sStringBuffer;
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                nCornerRadius);
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_CORNER_RADIUS, sStringBuffer.makeStringAndClear());
+    }
+
+    // write rectangle
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_RECT, bCreateNewline, true);
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+    ImpExportText( xShape );
+}
+
+void XMLShapeExport::ImpExportLineShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures, awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    OUString aStr;
+    OUStringBuffer sStringBuffer;
+    awt::Point aStart(0,0);
+    awt::Point aEnd(1,1);
+
+    // #85920# use 'Geometry' to get the points of the line
+    // since this slot take anchor pos into account.
+
+    // get matrix
+    ::basegfx::B2DHomMatrix aMatrix;
+    ImpExportNewTrans_GetB2DHomMatrix(aMatrix, xPropSet);
+
+    // decompose and correct about pRefPoint
+    ::basegfx::B2DTuple aTRScale;
+    double fTRShear(0.0);
+    double fTRRotate(0.0);
+    ::basegfx::B2DTuple aTRTranslate;
+    ImpExportNewTrans_DecomposeAndRefPoint(aMatrix, aTRScale, fTRShear, fTRRotate, aTRTranslate, pRefPoint);
+
+    // create base position
+    awt::Point aBasePosition(FRound(aTRTranslate.getX()), FRound(aTRTranslate.getY()));
+
+    if (xPropSet->getPropertySetInfo()->hasPropertyByName("Geometry"))
+    {
+        // get the two points
+        uno::Any aAny(xPropSet->getPropertyValue("Geometry"));
+        if (auto pSourcePolyPolygon
+                = o3tl::tryAccess<drawing::PointSequenceSequence>(aAny))
+        {
+            if (pSourcePolyPolygon->getLength() > 0)
+            {
+                const drawing::PointSequence& rInnerSequence = (*pSourcePolyPolygon)[0];
+                if (rInnerSequence.hasElements())
+                {
+                    const awt::Point& rPoint = rInnerSequence[0];
+                    aStart = awt::Point(rPoint.X + aBasePosition.X, rPoint.Y + aBasePosition.Y);
+                }
+                if (rInnerSequence.getLength() > 1)
+                {
+                    const awt::Point& rPoint = rInnerSequence[1];
+                    aEnd = awt::Point(rPoint.X + aBasePosition.X, rPoint.Y + aBasePosition.Y);
+                }
+            }
+        }
+    }
+
+    if( nFeatures & XMLShapeExportFlags::X )
+    {
+        // svg: x1
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                aStart.X);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X1, aStr);
+    }
+    else
+    {
+        aEnd.X -= aStart.X;
+    }
+
+    if( nFeatures & XMLShapeExportFlags::Y )
+    {
+        // svg: y1
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                aStart.Y);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y1, aStr);
+    }
+    else
+    {
+        aEnd.Y -= aStart.Y;
+    }
+
+    // svg: x2
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+            aEnd.X);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X2, aStr);
+
+    // svg: y2
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+            aEnd.Y);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y2, aStr);
+
+    // write line
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_LINE, bCreateNewline, true);
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+    ImpExportText( xShape );
+
+}
+
+void XMLShapeExport::ImpExportEllipseShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures, awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    // get size to decide between Circle and Ellipse
+    awt::Size aSize = xShape->getSize();
+    sal_Int32 nRx((aSize.Width + 1) / 2);
+    sal_Int32 nRy((aSize.Height + 1) / 2);
+    bool bCircle(nRx == nRy);
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    drawing::CircleKind eKind = drawing::CircleKind_FULL;
+    xPropSet->getPropertyValue("CircleKind") >>= eKind;
+    if( eKind != drawing::CircleKind_FULL )
+    {
+        OUStringBuffer sStringBuffer;
+        sal_Int32 nStartAngle = 0;
+        sal_Int32 nEndAngle = 0;
+        xPropSet->getPropertyValue("CircleStartAngle") >>= nStartAngle;
+        xPropSet->getPropertyValue("CircleEndAngle") >>= nEndAngle;
+
+        const double dStartAngle = nStartAngle / 100.0;
+        const double dEndAngle = nEndAngle / 100.0;
+
+        // export circle kind
+        SvXMLUnitConverter::convertEnum( sStringBuffer, eKind, aXML_CircleKind_EnumMap );
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_KIND, sStringBuffer.makeStringAndClear() );
+
+        // export start angle
+        ::sax::Converter::convertDouble( sStringBuffer, dStartAngle );
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_START_ANGLE, sStringBuffer.makeStringAndClear() );
+
+        // export end angle
+        ::sax::Converter::convertDouble( sStringBuffer, dEndAngle );
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_END_ANGLE, sStringBuffer.makeStringAndClear() );
+    }
+
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+
+    // write ellipse or circle
+    SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW,
+                            bCircle ? XML_CIRCLE : XML_ELLIPSE,
+                            bCreateNewline, true);
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+    ImpExportText( xShape );
+
+}
+
+void XMLShapeExport::ImpExportPolygonShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XmlShapeType eShapeType, XMLShapeExportFlags nFeatures, awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    bool bBezier(eShapeType == XmlShapeTypeDrawClosedBezierShape
+        || eShapeType == XmlShapeTypeDrawOpenBezierShape);
+
+    // get matrix
+    ::basegfx::B2DHomMatrix aMatrix;
+    ImpExportNewTrans_GetB2DHomMatrix(aMatrix, xPropSet);
+
+    // decompose and correct about pRefPoint
+    ::basegfx::B2DTuple aTRScale;
+    double fTRShear(0.0);
+    double fTRRotate(0.0);
+    ::basegfx::B2DTuple aTRTranslate;
+    ImpExportNewTrans_DecomposeAndRefPoint(aMatrix, aTRScale, fTRShear, fTRRotate, aTRTranslate, pRefPoint);
+
+    // use features and write
+    ImpExportNewTrans_FeaturesAndWrite(aTRScale, fTRShear, fTRRotate, aTRTranslate, nFeatures);
+
+    // create and export ViewBox
+    awt::Size aSize(FRound(aTRScale.getX()), FRound(aTRScale.getY()));
+    SdXMLImExViewBox aViewBox(0, 0, aSize.Width, aSize.Height);
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_VIEWBOX, aViewBox.GetExportString());
+
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+
+    // prepare name (with most used)
+    enum ::xmloff::token::XMLTokenEnum eName(XML_PATH);
+
+    if(bBezier)
+    {
+        // get PolygonBezier
+        uno::Any aAny( xPropSet->getPropertyValue("Geometry") );
+        auto pSourcePolyPolygon = o3tl::tryAccess<drawing::PolyPolygonBezierCoords>(aAny);
+        if(pSourcePolyPolygon && pSourcePolyPolygon->Coordinates.getLength())
+        {
+            const basegfx::B2DPolyPolygon aPolyPolygon(
+                basegfx::utils::UnoPolyPolygonBezierCoordsToB2DPolyPolygon(
+                    *pSourcePolyPolygon));
+
+            // complex polygon shape, write as svg:d
+            const OUString aPolygonString(
+                basegfx::utils::exportToSvgD(
+                    aPolyPolygon,
+                    true,       // bUseRelativeCoordinates
+                    false,      // bDetectQuadraticBeziers: not used in old, but maybe activated now
+                    true));     // bHandleRelativeNextPointCompatible
+
+            // write point array
+            mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_D, aPolygonString);
+        }
+    }
+    else
+    {
+        // get non-bezier polygon
+        uno::Any aAny( xPropSet->getPropertyValue("Geometry") );
+        const basegfx::B2DPolyPolygon aPolyPolygon(
+            basegfx::utils::UnoPointSequenceSequenceToB2DPolyPolygon(*o3tl::doAccess<drawing::PointSequenceSequence>(aAny)));
+
+        if(!aPolyPolygon.areControlPointsUsed() && 1 == aPolyPolygon.count())
+        {
+            // simple polygon shape, can be written as svg:points sequence
+            const basegfx::B2DPolygon& aPolygon(aPolyPolygon.getB2DPolygon(0));
+            const OUString aPointString(basegfx::utils::exportToSvgPoints(aPolygon));
+
+            // write point array
+            mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_POINTS, aPointString);
+
+            // set name
+            eName = aPolygon.isClosed() ? XML_POLYGON : XML_POLYLINE;
+        }
+        else
+        {
+            // complex polygon shape, write as svg:d
+            const OUString aPolygonString(
+                basegfx::utils::exportToSvgD(
+                    aPolyPolygon,
+                    true,       // bUseRelativeCoordinates
+                    false,      // bDetectQuadraticBeziers: not used in old, but maybe activated now
+                    true));     // bHandleRelativeNextPointCompatible
+
+            // write point array
+            mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_D, aPolygonString);
+        }
+    }
+
+    // write object, but after attributes are added since this call will
+    // consume all of these added attributes and the destructor will close the
+    // scope. Also before text is added; this may add sub-scopes as needed
+    SvXMLElementExport aOBJ(
+        mrExport,
+        XML_NAMESPACE_DRAW,
+        eName,
+        bCreateNewline,
+        true);
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+    ImpExportText( xShape );
+
+}
+
+namespace
+{
+
+OUString getNameFromStreamURL(std::u16string_view rURL)
+{
+    static constexpr std::u16string_view sPackageURL(u"vnd.sun.star.Package:");
+
+    OUString sResult;
+
+    if (o3tl::starts_with(rURL, sPackageURL))
+    {
+        std::u16string_view sRequestedName = rURL.substr(sPackageURL.size());
+        size_t nLastIndex = sRequestedName.rfind('/') + 1;
+        if ((nLastIndex > 0) && (nLastIndex < sRequestedName.size()))
+            sRequestedName = sRequestedName.substr(nLastIndex);
+        nLastIndex = sRequestedName.rfind('.');
+        if (nLastIndex != std::u16string_view::npos)
+            sRequestedName = sRequestedName.substr(0, nLastIndex);
+        if (!sRequestedName.empty())
+            sResult = sRequestedName;
+    }
+
+    return sResult;
+}
+
+} // end anonymous namespace
+
+void XMLShapeExport::ImpExportGraphicObjectShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XmlShapeType eShapeType, XMLShapeExportFlags nFeatures, awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    bool bIsEmptyPresObj = false;
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    if(eShapeType == XmlShapeTypePresGraphicObjectShape)
+        bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_GRAPHIC) );
+
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW,
+                              XML_FRAME, bCreateNewline, true );
+
+    if (!bIsEmptyPresObj)
+    {
+        uno::Reference<graphic::XGraphic> xGraphic;
+        OUString sOutMimeType;
+
+        {
+            OUString aStreamURL;
+            xPropSet->getPropertyValue("GraphicStreamURL") >>= aStreamURL;
+            OUString sRequestedName = getNameFromStreamURL(aStreamURL);
+
+            xPropSet->getPropertyValue("Graphic") >>= xGraphic;
+
+            OUString sInternalURL;
+
+            if (xGraphic.is())
+                sInternalURL = mrExport.AddEmbeddedXGraphic(xGraphic, sOutMimeType, sRequestedName);
+
+            if (!sInternalURL.isEmpty())
+            {
+                // apply possible changed stream URL to embedded image object
+                if (!sRequestedName.isEmpty())
+                {
+                    OUString newStreamURL = "vnd.sun.star.Package:";
+                    if (sInternalURL[0] == '#')
+                    {
+                        newStreamURL += sInternalURL.subView(1, sInternalURL.getLength() - 1);
+                    }
+                    else
+                    {
+                        newStreamURL += sInternalURL;
+                    }
+
+                    if (newStreamURL != aStreamURL)
+                    {
+                        xPropSet->setPropertyValue("GraphicStreamURL", uno::Any(newStreamURL));
+                    }
+                }
+
+                mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, sInternalURL);
+                mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE);
+                mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED);
+                mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD);
+            }
+        }
+
+        {
+            if (GetExport().getSaneDefaultVersion() > SvtSaveOptions::ODFSVER_012)
+            {
+                if (sOutMimeType.isEmpty())
+                {
+                    GetExport().GetGraphicMimeTypeFromStream(xGraphic, sOutMimeType);
+                }
+                if (!sOutMimeType.isEmpty())
+                {   // ODF 1.3 OFFICE-3943
+                    GetExport().AddAttribute(
+                        SvtSaveOptions::ODFSVER_013 <= GetExport().getSaneDefaultVersion()
+                            ? XML_NAMESPACE_DRAW
+                            : XML_NAMESPACE_LO_EXT,
+                        "mime-type", sOutMimeType);
+                }
+            }
+
+            SvXMLElementExport aElement(mrExport, XML_NAMESPACE_DRAW, XML_IMAGE, true, true);
+
+            // optional office:binary-data
+            if (xGraphic.is())
+            {
+                mrExport.AddEmbeddedXGraphicAsBase64(xGraphic);
+            }
+            if (!bIsEmptyPresObj)
+                ImpExportText(xShape);
+        }
+
+        //Resolves: fdo#62461 put preferred image first above, followed by
+        //fallback here
+        const bool bAddReplacementImages = officecfg::Office::Common::Save::Graphic::AddReplacementImages::get();
+        if( !bIsEmptyPresObj && bAddReplacementImages)
+        {
+            uno::Reference<graphic::XGraphic> xReplacementGraphic;
+            xPropSet->getPropertyValue("ReplacementGraphic") >>= xReplacementGraphic;
+
+            // If there is no url, then the graphic is empty
+            if (xReplacementGraphic.is())
+            {
+                OUString aMimeType;
+                const OUString aHref = mrExport.AddEmbeddedXGraphic(xReplacementGraphic, aMimeType);
+
+                if (aMimeType.isEmpty())
+                    mrExport.GetGraphicMimeTypeFromStream(xReplacementGraphic, aMimeType);
+
+                if (!aHref.isEmpty())
+                {
+                    mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, aHref);
+                    mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+                    mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+                    mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD );
+                }
+
+                if (!aMimeType.isEmpty() && GetExport().getSaneDefaultVersion() > SvtSaveOptions::ODFSVER_012)
+                {   // ODF 1.3 OFFICE-3943
+                    mrExport.AddAttribute(
+                        SvtSaveOptions::ODFSVER_013 <= GetExport().getSaneDefaultVersion()
+                            ? XML_NAMESPACE_DRAW
+                            : XML_NAMESPACE_LO_EXT,
+                        "mime-type", aMimeType);
+                }
+
+                SvXMLElementExport aElement(mrExport, XML_NAMESPACE_DRAW, XML_IMAGE, true, true);
+
+                // optional office:binary-data
+                mrExport.AddEmbeddedXGraphicAsBase64(xReplacementGraphic);
+            }
+        }
+    }
+
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+
+    // image map
+    GetExport().GetImageMapExport().Export( xPropSet );
+    ImpExportDescription( xShape ); // #i68101#
+
+    // Signature Line, QR Code - needs to be after the images!
+    if (GetExport().getSaneDefaultVersion() & SvtSaveOptions::ODFSVER_EXTENDED)
+    {
+        ImpExportSignatureLine(xShape);
+        ImpExportQRCode(xShape);
+    }
+}
+
+void XMLShapeExport::ImpExportChartShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XmlShapeType eShapeType, XMLShapeExportFlags nFeatures, awt::Point* pRefPoint,
+    SvXMLAttributeList* pAttrList )
+{
+    ImpExportOLE2Shape( xShape, eShapeType, nFeatures, pRefPoint, pAttrList );
+}
+
+void XMLShapeExport::ImpExportControlShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures, awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(xPropSet.is())
+    {
+        // Transformation
+        ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+    }
+
+    uno::Reference< drawing::XControlShape > xControl( xShape, uno::UNO_QUERY );
+    SAL_WARN_IF( !xControl.is(), "xmloff", "Control shape is not supporting XControlShape" );
+    if( xControl.is() )
+    {
+        uno::Reference< beans::XPropertySet > xControlModel( xControl->getControl(), uno::UNO_QUERY );
+        SAL_WARN_IF( !xControlModel.is(), "xmloff", "Control shape has not XControlModel" );
+        if( xControlModel.is() )
+        {
+            OUString sControlId = mrExport.GetFormExport()->getControlId( xControlModel );
+            mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_CONTROL, sControlId );
+        }
+    }
+
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_CONTROL, bCreateNewline, true);
+
+    ImpExportDescription( xShape ); // #i68101#
+}
+
+void XMLShapeExport::ImpExportConnectorShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */)
+{
+    uno::Reference< beans::XPropertySet > xProps( xShape, uno::UNO_QUERY );
+
+    OUString aStr;
+    OUStringBuffer sStringBuffer;
+
+    // export connection kind
+    drawing::ConnectorType eType = drawing::ConnectorType_STANDARD;
+    uno::Any aAny = xProps->getPropertyValue("EdgeKind");
+    aAny >>= eType;
+
+    if( eType != drawing::ConnectorType_STANDARD )
+    {
+        SvXMLUnitConverter::convertEnum( sStringBuffer, eType, aXML_ConnectionKind_EnumMap );
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_TYPE, aStr);
+    }
+
+    // export line skew
+    sal_Int32 nDelta1 = 0, nDelta2 = 0, nDelta3 = 0;
+
+    aAny = xProps->getPropertyValue("EdgeLine1Delta");
+    aAny >>= nDelta1;
+    aAny = xProps->getPropertyValue("EdgeLine2Delta");
+    aAny >>= nDelta2;
+    aAny = xProps->getPropertyValue("EdgeLine3Delta");
+    aAny >>= nDelta3;
+
+    if( nDelta1 != 0 || nDelta2 != 0 || nDelta3 != 0 )
+    {
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                nDelta1);
+        if( nDelta2 != 0 || nDelta3 != 0 )
+        {
+            sStringBuffer.append( ' ' );
+            mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                    nDelta2);
+            if( nDelta3 != 0 )
+            {
+                sStringBuffer.append( ' ' );
+                mrExport.GetMM100UnitConverter().convertMeasureToXML(
+                        sStringBuffer, nDelta3);
+            }
+        }
+
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_LINE_SKEW, aStr);
+    }
+
+    // export start and end point
+    awt::Point aStart(0,0);
+    awt::Point aEnd(1,1);
+
+    /* Get <StartPositionInHoriL2R> and
+       <EndPositionInHoriL2R>, if they exist and if the document is exported
+       into the OpenOffice.org file format.
+       These properties only exist at service css::text::Shape - the
+       Writer UNO service for shapes.
+       This code is needed, because the positioning attributes in the
+       OpenOffice.org file format are given in horizontal left-to-right layout
+       regardless the layout direction the shape is in. In the OASIS Open Office
+       file format the positioning attributes are correctly given in the layout
+       direction the shape is in. Thus, this code provides the conversion from
+       the OASIS Open Office file format to the OpenOffice.org file format. (#i36248#)
+    */
+    if ( !( GetExport().getExportFlags() & SvXMLExportFlags::OASIS ) &&
+         xProps->getPropertySetInfo()->hasPropertyByName("StartPositionInHoriL2R") &&
+         xProps->getPropertySetInfo()->hasPropertyByName("EndPositionInHoriL2R") )
+    {
+        xProps->getPropertyValue("StartPositionInHoriL2R") >>= aStart;
+        xProps->getPropertyValue("EndPositionInHoriL2R") >>= aEnd;
+    }
+    else
+    {
+        xProps->getPropertyValue("StartPosition") >>= aStart;
+        xProps->getPropertyValue("EndPosition") >>= aEnd;
+    }
+
+    if( pRefPoint )
+    {
+        aStart.X -= pRefPoint->X;
+        aStart.Y -= pRefPoint->Y;
+        aEnd.X -= pRefPoint->X;
+        aEnd.Y -= pRefPoint->Y;
+    }
+
+    if( nFeatures & XMLShapeExportFlags::X )
+    {
+        // svg: x1
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                aStart.X);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X1, aStr);
+    }
+    else
+    {
+        aEnd.X -= aStart.X;
+    }
+
+    if( nFeatures & XMLShapeExportFlags::Y )
+    {
+        // svg: y1
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                aStart.Y);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y1, aStr);
+    }
+    else
+    {
+        aEnd.Y -= aStart.Y;
+    }
+
+    // svg: x2
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer, aEnd.X);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X2, aStr);
+
+    // svg: y2
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer, aEnd.Y);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y2, aStr);
+
+    // #i39320#
+    uno::Reference< uno::XInterface > xRefS;
+    uno::Reference< uno::XInterface > xRefE;
+
+    // export start connection
+    xProps->getPropertyValue("StartShape") >>= xRefS;
+    if( xRefS.is() )
+    {
+        const OUString& rShapeId = mrExport.getInterfaceToIdentifierMapper().getIdentifier( xRefS );
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_START_SHAPE, rShapeId);
+
+        aAny = xProps->getPropertyValue("StartGluePointIndex");
+        sal_Int32 nGluePointId = 0;
+        if( aAny >>= nGluePointId )
+        {
+            if( nGluePointId != -1 )
+            {
+                mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_START_GLUE_POINT, OUString::number( nGluePointId ));
+            }
+        }
+    }
+
+    // export end connection
+    xProps->getPropertyValue("EndShape") >>= xRefE;
+    if( xRefE.is() )
+    {
+        const OUString& rShapeId = mrExport.getInterfaceToIdentifierMapper().getIdentifier( xRefE );
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_END_SHAPE, rShapeId);
+
+        aAny = xProps->getPropertyValue("EndGluePointIndex");
+        sal_Int32 nGluePointId = 0;
+        if( aAny >>= nGluePointId )
+        {
+            if( nGluePointId != -1 )
+            {
+                mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_END_GLUE_POINT, OUString::number( nGluePointId ));
+            }
+        }
+    }
+
+    // get PolygonBezier
+    aAny = xProps->getPropertyValue("PolyPolygonBezier");
+    auto pSourcePolyPolygon = o3tl::tryAccess<drawing::PolyPolygonBezierCoords>(aAny);
+    if(pSourcePolyPolygon && pSourcePolyPolygon->Coordinates.getLength())
+    {
+        const basegfx::B2DPolyPolygon aPolyPolygon(
+            basegfx::utils::UnoPolyPolygonBezierCoordsToB2DPolyPolygon(
+                *pSourcePolyPolygon));
+        const OUString aPolygonString(
+            basegfx::utils::exportToSvgD(
+                aPolyPolygon,
+                true,           // bUseRelativeCoordinates
+                false,          // bDetectQuadraticBeziers: not used in old, but maybe activated now
+                true));         // bHandleRelativeNextPointCompatible
+
+        // write point array
+        mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_D, aPolygonString);
+    }
+
+    // get matrix
+    ::basegfx::B2DHomMatrix aMatrix;
+    ImpExportNewTrans_GetB2DHomMatrix(aMatrix, xProps);
+
+    // decompose and correct about pRefPoint
+    ::basegfx::B2DTuple aTRScale;
+    double fTRShear(0.0);
+    double fTRRotate(0.0);
+    ::basegfx::B2DTuple aTRTranslate;
+    ImpExportNewTrans_DecomposeAndRefPoint(aMatrix, aTRScale, fTRShear,
+            fTRRotate, aTRTranslate, pRefPoint);
+
+    // fdo#49678: create and export ViewBox
+    awt::Size aSize(FRound(aTRScale.getX()), FRound(aTRScale.getY()));
+    SdXMLImExViewBox aViewBox(0, 0, aSize.Width, aSize.Height);
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_VIEWBOX, aViewBox.GetExportString());
+
+    // write connector shape. Add Export later.
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_CONNECTOR, bCreateNewline, true);
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+    ImpExportText( xShape );
+}
+
+void XMLShapeExport::ImpExportMeasureShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures /* = SEF_DEFAULT */, awt::Point const * pRefPoint /* = NULL */)
+{
+    uno::Reference< beans::XPropertySet > xProps( xShape, uno::UNO_QUERY );
+
+    OUString aStr;
+    OUStringBuffer sStringBuffer;
+
+    // export start and end point
+    awt::Point aStart(0,0);
+    awt::Point aEnd(1,1);
+
+    /* Get <StartPositionInHoriL2R> and
+       <EndPositionInHoriL2R>, if they exist and if the document is exported
+       into the OpenOffice.org file format.
+       These properties only exist at service css::text::Shape - the
+       Writer UNO service for shapes.
+       This code is needed, because the positioning attributes in the
+       OpenOffice.org file format are given in horizontal left-to-right layout
+       regardless the layout direction the shape is in. In the OASIS Open Office
+       file format the positioning attributes are correctly given in the layout
+       direction the shape is in. Thus, this code provides the conversion from
+       the OASIS Open Office file format to the OpenOffice.org file format. (#i36248#)
+    */
+    if ( !( GetExport().getExportFlags() & SvXMLExportFlags::OASIS ) &&
+         xProps->getPropertySetInfo()->hasPropertyByName("StartPositionInHoriL2R") &&
+         xProps->getPropertySetInfo()->hasPropertyByName("EndPositionInHoriL2R") )
+    {
+        xProps->getPropertyValue("StartPositionInHoriL2R") >>= aStart;
+        xProps->getPropertyValue("EndPositionInHoriL2R") >>= aEnd;
+    }
+    else
+    {
+        xProps->getPropertyValue("StartPosition") >>= aStart;
+        xProps->getPropertyValue("EndPosition") >>= aEnd;
+    }
+
+    if( pRefPoint )
+    {
+        aStart.X -= pRefPoint->X;
+        aStart.Y -= pRefPoint->Y;
+        aEnd.X -= pRefPoint->X;
+        aEnd.Y -= pRefPoint->Y;
+    }
+
+    if( nFeatures & XMLShapeExportFlags::X )
+    {
+        // svg: x1
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                aStart.X);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X1, aStr);
+    }
+    else
+    {
+        aEnd.X -= aStart.X;
+    }
+
+    if( nFeatures & XMLShapeExportFlags::Y )
+    {
+        // svg: y1
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                aStart.Y);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y1, aStr);
+    }
+    else
+    {
+        aEnd.Y -= aStart.Y;
+    }
+
+    // svg: x2
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer, aEnd.X);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_X2, aStr);
+
+    // svg: y2
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer, aEnd.Y);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_Y2, aStr);
+
+    // write measure shape
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_MEASURE, bCreateNewline, true);
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+
+    uno::Reference< text::XText > xText( xShape, uno::UNO_QUERY );
+    if( xText.is() )
+        mrExport.GetTextParagraphExport()->exportText( xText );
+}
+
+void XMLShapeExport::ImpExportOLE2Shape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XmlShapeType eShapeType, XMLShapeExportFlags nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */,
+    SvXMLAttributeList* pAttrList /* = NULL */ )
+{
+    uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    uno::Reference< container::XNamed > xNamed(xShape, uno::UNO_QUERY);
+
+    SAL_WARN_IF( !xPropSet.is() || !xNamed.is(), "xmloff", "ole shape is not implementing needed interfaces");
+    if(!(xPropSet.is() && xNamed.is()))
+        return;
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    bool bIsEmptyPresObj = false;
+
+    // presentation settings
+    if(eShapeType == XmlShapeTypePresOLE2Shape)
+        bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_OBJECT) );
+    else if(eShapeType == XmlShapeTypePresChartShape)
+        bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_CHART) );
+    else if(eShapeType == XmlShapeTypePresSheetShape)
+        bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_TABLE) );
+
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    bool bExportEmbedded(mrExport.getExportFlags() & SvXMLExportFlags::EMBEDDED);
+    OUString sPersistName;
+    SvXMLElementExport aElement( mrExport, XML_NAMESPACE_DRAW,
+                              XML_FRAME, bCreateNewline, true );
+
+    if (!bIsEmptyPresObj)
+    {
+        if (pAttrList)
+        {
+            mrExport.AddAttributeList(pAttrList);
+        }
+
+        OUString sClassId;
+        OUString sURL;
+        bool bInternal = false;
+        xPropSet->getPropertyValue("IsInternal") >>= bInternal;
+
+        {
+
+            if ( bInternal )
+            {
+                // OOo internal links have no storage persistence, URL is stored in the XML file
+                // the result LinkURL is empty in case the object is not a link
+                xPropSet->getPropertyValue("LinkURL") >>= sURL;
+            }
+
+            xPropSet->getPropertyValue("PersistName") >>= sPersistName;
+            if ( sURL.isEmpty() )
+            {
+                if( !sPersistName.isEmpty() )
+                {
+                    sURL = "vnd.sun.star.EmbeddedObject:" + sPersistName;
+                }
+            }
+
+            if( !bInternal )
+                xPropSet->getPropertyValue("CLSID") >>= sClassId;
+
+            if( !sClassId.isEmpty() )
+                mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_CLASS_ID, sClassId );
+
+            if(!bExportEmbedded)
+            {
+                // xlink:href
+                if( !sURL.isEmpty() )
+                {
+                    // #96717# in theorie, if we don't have a URL we shouldn't even
+                    // export this OLE shape. But practically it's too risky right now
+                    // to change this so we better dispose this on load
+                    sURL = mrExport.AddEmbeddedObject( sURL );
+
+                    mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, sURL );
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD );
+                }
+                else
+                {
+                    // tdf#153179 Export the preview graphic of the object if the object is missing.
+                    uno::Reference<graphic::XGraphic> xGraphic;
+                    xPropSet->getPropertyValue("Graphic") >>= xGraphic;
+
+                    if (xGraphic.is())
+                    {
+                        OUString aMimeType;
+                        const OUString aHref = mrExport.AddEmbeddedXGraphic(xGraphic, aMimeType);
+
+                        if (aMimeType.isEmpty())
+                            mrExport.GetGraphicMimeTypeFromStream(xGraphic, aMimeType);
+
+                        if (!aHref.isEmpty())
+                        {
+                            mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, aHref);
+                            mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE);
+                            mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED);
+                            mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD);
+                        }
+
+                        if (!aMimeType.isEmpty()
+                            && GetExport().getSaneDefaultVersion() > SvtSaveOptions::ODFSVER_012)
+                        { // ODF 1.3 OFFICE-3943
+                            mrExport.AddAttribute(SvtSaveOptions::ODFSVER_013
+                                                          <= GetExport().getSaneDefaultVersion()
+                                                      ? XML_NAMESPACE_DRAW
+                                                      : XML_NAMESPACE_LO_EXT,
+                                                  "mime-type", aMimeType);
+                        }
+
+                        SvXMLElementExport aImageElem(mrExport, XML_NAMESPACE_DRAW, XML_IMAGE, true,
+                                                      true);
+
+                        // optional office:binary-data
+                        mrExport.AddEmbeddedXGraphicAsBase64(xGraphic);
+
+                        ImpExportEvents(xShape);
+                        ImpExportGluePoints(xShape);
+                        ImpExportDescription(xShape);
+
+                        return;
+                    }
+                }
+            }
+        }
+
+        enum XMLTokenEnum eElem = sClassId.isEmpty() ? XML_OBJECT : XML_OBJECT_OLE ;
+        SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, eElem, true, true );
+
+        // tdf#112547 export text as child of draw:object, where import expects it
+        if (!bIsEmptyPresObj && supportsText(eShapeType))
+        {
+            // #i118485# Add text export, the draw OLE shape allows text now
+            ImpExportText( xShape, TextPNS::EXTENSION );
+        }
+
+        if(bExportEmbedded && !bIsEmptyPresObj)
+        {
+            if(bInternal)
+            {
+                // embedded XML
+                uno::Reference< lang::XComponent > xComp;
+                xPropSet->getPropertyValue("Model") >>= xComp;
+                SAL_WARN_IF( !xComp.is(), "xmloff", "no xModel for own OLE format" );
+                mrExport.ExportEmbeddedOwnObject( xComp );
+            }
+            else
+            {
+                // embed as Base64
+                // this is an alien object ( currently MSOLE is the only supported type of such objects )
+                // in case it is not an OASIS format the object should be asked to store replacement image if possible
+
+                OUString sURLRequest( sURL );
+                if ( !( mrExport.getExportFlags() & SvXMLExportFlags::OASIS ) )
+                    sURLRequest +=  "?oasis=false";
+                mrExport.AddEmbeddedObjectAsBase64( sURLRequest );
+            }
+        }
+    }
+    if( !bIsEmptyPresObj )
+    {
+        OUString sURL = XML_EMBEDDEDOBJECTGRAPHIC_URL_BASE + sPersistName;
+        if( !bExportEmbedded )
+        {
+            sURL = GetExport().AddEmbeddedObject( sURL );
+            mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, sURL );
+            mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+            mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+            mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD );
+        }
+
+        SvXMLElementExport aElem( GetExport(), XML_NAMESPACE_DRAW,
+                                  XML_IMAGE, false, true );
+
+        if( bExportEmbedded )
+            GetExport().AddEmbeddedObjectAsBase64( sURL );
+    }
+
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+    ImpExportDescription( xShape ); // #i68101#
+
+}
+
+void XMLShapeExport::ImpExportPageShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XmlShapeType eShapeType, XMLShapeExportFlags nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    // #86163# Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    // export page number used for this page
+    uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() );
+    static const OUStringLiteral aPageNumberStr(u"PageNumber");
+    if( xPropSetInfo.is() && xPropSetInfo->hasPropertyByName(aPageNumberStr))
+    {
+        sal_Int32 nPageNumber = 0;
+        xPropSet->getPropertyValue(aPageNumberStr) >>= nPageNumber;
+        if( nPageNumber )
+            mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_PAGE_NUMBER, OUString::number(nPageNumber));
+    }
+
+    // a presentation page shape, normally used on notes pages only. If
+    // it is used not as presentation shape, it may have been created with
+    // copy-paste exchange between draw and impress (this IS possible...)
+    if(eShapeType == XmlShapeTypePresPageShape)
+    {
+        mrExport.AddAttribute(XML_NAMESPACE_PRESENTATION, XML_CLASS,
+                             XML_PAGE);
+    }
+
+    // write Page shape
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_PAGE_THUMBNAIL, bCreateNewline, true);
+}
+
+void XMLShapeExport::ImpExportCaptionShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures /* = SEF_DEFAULT */, awt::Point* pRefPoint /* = NULL */)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    // evtl. corner radius?
+    sal_Int32 nCornerRadius(0);
+    xPropSet->getPropertyValue("CornerRadius") >>= nCornerRadius;
+    if(nCornerRadius)
+    {
+        OUStringBuffer sStringBuffer;
+        mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+                nCornerRadius);
+        mrExport.AddAttribute(XML_NAMESPACE_DRAW, XML_CORNER_RADIUS, sStringBuffer.makeStringAndClear());
+    }
+
+    awt::Point aCaptionPoint;
+    xPropSet->getPropertyValue("CaptionPoint") >>= aCaptionPoint;
+
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(msBuffer,
+            aCaptionPoint.X);
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_CAPTION_POINT_X, msBuffer.makeStringAndClear() );
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(msBuffer,
+            aCaptionPoint.Y);
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_CAPTION_POINT_Y, msBuffer.makeStringAndClear() );
+
+    // write Caption shape. Add export later.
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    bool bAnnotation( (nFeatures & XMLShapeExportFlags::ANNOTATION) == XMLShapeExportFlags::ANNOTATION );
+
+    SvXMLElementExport aObj( mrExport,
+                             (bAnnotation ? XML_NAMESPACE_OFFICE
+                                           : XML_NAMESPACE_DRAW),
+                             (bAnnotation ? XML_ANNOTATION : XML_CAPTION),
+                             bCreateNewline, true );
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+    if( bAnnotation )
+        mrExport.exportAnnotationMeta( xShape );
+    ImpExportText( xShape );
+
+}
+
+void XMLShapeExport::ImpExportFrameShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures, css::awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW,
+                              XML_FRAME, bCreateNewline, true );
+
+    // export frame url
+    OUString aStr;
+    xPropSet->getPropertyValue("FrameURL") >>= aStr;
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(aStr) );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD );
+
+    // export name
+    xPropSet->getPropertyValue("FrameName") >>= aStr;
+    if( !aStr.isEmpty() )
+        mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_FRAME_NAME, aStr );
+
+    // write floating frame
+    {
+        SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_FLOATING_FRAME, true, true);
+    }
+
+    ImpExportDescription(xShape);
+}
+
+void XMLShapeExport::ImpExportAppletShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures, css::awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aElement( mrExport, XML_NAMESPACE_DRAW,
+                              XML_FRAME, bCreateNewline, true );
+
+    // export frame url
+    OUString aStr;
+    xPropSet->getPropertyValue("AppletCodeBase") >>= aStr;
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(aStr) );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD );
+
+    // export draw:applet-name
+    xPropSet->getPropertyValue("AppletName") >>= aStr;
+    if( !aStr.isEmpty() )
+        mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_APPLET_NAME, aStr );
+
+    // export draw:code
+    xPropSet->getPropertyValue("AppletCode") >>= aStr;
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_CODE, aStr );
+
+    // export draw:may-script
+    bool bIsScript = false;
+    xPropSet->getPropertyValue("AppletIsScript") >>= bIsScript;
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_MAY_SCRIPT, bIsScript ? XML_TRUE : XML_FALSE );
+
+    {
+        // write applet
+        SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_APPLET, true, true);
+
+        // export parameters
+        uno::Sequence< beans::PropertyValue > aCommands;
+        xPropSet->getPropertyValue("AppletCommands") >>= aCommands;
+        for( const auto& rCommand : std::as_const(aCommands) )
+        {
+            rCommand.Value >>= aStr;
+            mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, rCommand.Name );
+            mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, aStr );
+            SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, false, true );
+        }
+    }
+
+    ImpExportDescription(xShape);
+}
+
+void XMLShapeExport::ImpExportPluginShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures, css::awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aElement( mrExport, XML_NAMESPACE_DRAW,
+                              XML_FRAME, bCreateNewline, true );
+
+    // export plugin url
+    OUString aStr;
+    xPropSet->getPropertyValue("PluginURL") >>= aStr;
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_HREF, GetExport().GetRelativeReference(aStr) );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD );
+
+    // export mime-type
+    xPropSet->getPropertyValue("PluginMimeType") >>= aStr;
+    if(!aStr.isEmpty())
+        mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_MIME_TYPE, aStr );
+
+    {
+        // write plugin
+        SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DRAW, XML_PLUGIN, true, true);
+
+        // export parameters
+        uno::Sequence< beans::PropertyValue > aCommands;
+        xPropSet->getPropertyValue("PluginCommands") >>= aCommands;
+        for( const auto& rCommand : std::as_const(aCommands) )
+        {
+            rCommand.Value >>= aStr;
+            mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, rCommand.Name );
+            mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, aStr );
+            SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, false, true );
+        }
+    }
+
+    ImpExportDescription(xShape);
+}
+
+static void lcl_CopyStream(
+        uno::Reference<io::XInputStream> const& xInStream,
+        uno::Reference<embed::XStorage> const& xTarget,
+        OUString const& rPath, const OUString& rMimeType)
+{
+    ::comphelper::LifecycleProxy proxy;
+    uno::Reference<io::XStream> const xStream(
+        ::comphelper::OStorageHelper::GetStreamAtPackageURL(xTarget, rPath,
+            embed::ElementModes::WRITE | embed::ElementModes::TRUNCATE, proxy));
+    uno::Reference<io::XOutputStream> const xOutStream(
+            (xStream.is()) ? xStream->getOutputStream() : nullptr);
+    if (!xOutStream.is())
+    {
+        SAL_WARN("xmloff", "no output stream");
+        throw uno::Exception("no output stream",nullptr);
+    }
+    uno::Reference< beans::XPropertySet > const xStreamProps(xStream,
+        uno::UNO_QUERY);
+    if (xStreamProps.is()) { // this is NOT supported in FileSystemStorage
+        xStreamProps->setPropertyValue("MediaType",
+            uno::Any(rMimeType));
+        xStreamProps->setPropertyValue( // turn off compression
+            "Compressed",
+            uno::Any(false));
+    }
+    ::comphelper::OStorageHelper::CopyInputToOutput(xInStream, xOutStream);
+    xOutStream->closeOutput();
+    proxy.commitStorages();
+}
+
+static OUString
+lcl_StoreMediaAndGetURL(SvXMLExport & rExport,
+    uno::Reference<beans::XPropertySet> const& xPropSet,
+    OUString const& rURL, const OUString& rMimeType)
+{
+    OUString urlPath;
+    if (rURL.startsWithIgnoreAsciiCase("vnd.sun.star.Package:", &urlPath))
+    {
+        try // video is embedded
+        {
+            uno::Reference<embed::XStorage> const xTarget(
+                    rExport.GetTargetStorage(), uno::UNO_SET_THROW);
+            uno::Reference<io::XInputStream> xInStream;
+            xPropSet->getPropertyValue("PrivateStream")
+                    >>= xInStream;
+
+            if (!xInStream.is())
+            {
+                SAL_WARN("xmloff", "no input stream");
+                return OUString();
+            }
+
+            lcl_CopyStream(xInStream, xTarget, rURL, rMimeType);
+
+            return urlPath;
+        }
+        catch (uno::Exception const&)
+        {
+            TOOLS_INFO_EXCEPTION("xmloff", "exception while storing embedded media");
+        }
+        return OUString();
+    }
+    else
+    {
+        return rExport.GetRelativeReference(rURL); // linked
+    }
+}
+
+void XMLShapeExport::ImpExportMediaShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XmlShapeType eShapeType, XMLShapeExportFlags nFeatures, css::awt::Point* pRefPoint)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    if(eShapeType == XmlShapeTypePresMediaShape)
+    {
+        (void)ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_OBJECT) );
+    }
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aElem( mrExport, XML_NAMESPACE_DRAW,
+                              XML_FRAME, bCreateNewline, true );
+
+    // export media url
+    OUString aMediaURL;
+    xPropSet->getPropertyValue("MediaURL") >>= aMediaURL;
+    OUString sMimeType;
+    xPropSet->getPropertyValue("MediaMimeType") >>= sMimeType;
+
+    OUString const persistentURL =
+        lcl_StoreMediaAndGetURL(GetExport(), xPropSet, aMediaURL, sMimeType);
+
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_HREF, persistentURL );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+    mrExport.AddAttribute ( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD );
+
+    // export mime-type
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_MIME_TYPE, sMimeType );
+
+    // write plugin
+    auto pPluginOBJ = std::make_unique<SvXMLElementExport>(mrExport, XML_NAMESPACE_DRAW, XML_PLUGIN, !( nFeatures & XMLShapeExportFlags::NO_WS ), true);
+
+    // export parameters
+    const OUString aFalseStr(  "false"  ), aTrueStr(  "true"  );
+
+    bool bLoop = false;
+    static const OUStringLiteral aLoopStr(  u"Loop"  );
+    xPropSet->getPropertyValue( aLoopStr ) >>= bLoop;
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, aLoopStr );
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, bLoop ? aTrueStr : aFalseStr );
+    delete new SvXMLElementExport( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, false, true );
+
+    bool bMute = false;
+    static const OUStringLiteral aMuteStr(  u"Mute"  );
+    xPropSet->getPropertyValue( aMuteStr ) >>= bMute;
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, aMuteStr );
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, bMute ? aTrueStr : aFalseStr );
+    delete new SvXMLElementExport( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, false, true );
+
+    sal_Int16 nVolumeDB = 0;
+    xPropSet->getPropertyValue("VolumeDB") >>= nVolumeDB;
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, "VolumeDB" );
+    mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, OUString::number( nVolumeDB ) );
+    delete new SvXMLElementExport( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, false, true );
+
+    media::ZoomLevel eZoom;
+    OUString aZoomValue;
+    xPropSet->getPropertyValue("Zoom") >>= eZoom;
+    switch( eZoom )
+    {
+        case media::ZoomLevel_ZOOM_1_TO_4  : aZoomValue = "25%"; break;
+        case media::ZoomLevel_ZOOM_1_TO_2  : aZoomValue = "50%"; break;
+        case media::ZoomLevel_ORIGINAL     : aZoomValue = "100%"; break;
+        case media::ZoomLevel_ZOOM_2_TO_1  : aZoomValue = "200%"; break;
+        case media::ZoomLevel_ZOOM_4_TO_1  : aZoomValue = "400%"; break;
+        case media::ZoomLevel_FIT_TO_WINDOW: aZoomValue = "fit"; break;
+        case media::ZoomLevel_FIT_TO_WINDOW_FIXED_ASPECT: aZoomValue = "fixedfit"; break;
+        case media::ZoomLevel_FULLSCREEN   : aZoomValue = "fullscreen"; break;
+
+        default:
+        break;
+    }
+
+    if( !aZoomValue.isEmpty() )
+    {
+        mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, "Zoom" );
+        mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_VALUE, aZoomValue );
+        delete new SvXMLElementExport( mrExport, XML_NAMESPACE_DRAW, XML_PARAM, false, true );
+    }
+
+    pPluginOBJ.reset();
+
+    uno::Reference<graphic::XGraphic> xGraphic;
+    xPropSet->getPropertyValue("Graphic") >>= xGraphic;
+    Graphic aGraphic(xGraphic);
+    if (!aGraphic.IsNone())
+    {
+        // The media has a preview, export it.
+        uno::Reference<embed::XStorage> xPictureStorage;
+        uno::Reference<embed::XStorage> xStorage;
+        uno::Reference<io::XStream> xPictureStream;
+        OUString sPictureName;
+        xStorage.set(GetExport().GetTargetStorage(), uno::UNO_SET_THROW);
+        xPictureStorage.set(
+            xStorage->openStorageElement("Pictures", embed::ElementModes::READWRITE),
+            uno::UNO_SET_THROW);
+        sal_Int32 nIndex = 0;
+        while (true)
+        {
+            sPictureName = "MediaPreview" + OUString::number(++nIndex) + ".png";
+            if (!xPictureStorage->hasByName(sPictureName))
+            {
+                break;
+            }
+        }
+
+        xPictureStream.set(
+            xPictureStorage->openStreamElement(sPictureName, ::embed::ElementModes::READWRITE),
+            uno::UNO_SET_THROW);
+
+        uno::Reference<uno::XComponentContext> xContext = GetExport().getComponentContext();
+        uno::Reference<graphic::XGraphicProvider> xProvider(
+            graphic::GraphicProvider::create(xContext));
+        uno::Sequence<beans::PropertyValue> aArgs{
+            comphelper::makePropertyValue("MimeType", OUString("image/png")),
+            comphelper::makePropertyValue("OutputStream", xPictureStream->getOutputStream())
+        };
+        xProvider->storeGraphic(xGraphic, aArgs);
+        if (xPictureStorage.is())
+        {
+            uno::Reference<embed::XTransactedObject> xTrans(xPictureStorage, uno::UNO_QUERY);
+            if (xTrans.is())
+                xTrans->commit();
+        }
+        OUString sURL = "Pictures/" + sPictureName;
+        mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_HREF, sURL);
+        mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE);
+        mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED);
+        mrExport.AddAttribute(XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD);
+        SvXMLElementExport aImageElem(GetExport(), XML_NAMESPACE_DRAW, XML_IMAGE, false, true);
+    }
+
+    ImpExportDescription(xShape);
+}
+
+void XMLShapeExport::ImpExport3DSceneShape( const uno::Reference< drawing::XShape >& xShape, XMLShapeExportFlags nFeatures, awt::Point* pRefPoint)
+{
+    uno::Reference< drawing::XShapes > xShapes(xShape, uno::UNO_QUERY);
+    if(!(xShapes.is() && xShapes->getCount()))
+        return;
+
+    uno::Reference< beans::XPropertySet > xPropSet( xShape, uno::UNO_QUERY );
+    SAL_WARN_IF( !xPropSet.is(), "xmloff", "XMLShapeExport::ImpExport3DSceneShape can't export a scene without a propertyset" );
+    if( !xPropSet.is() )
+        return;
+
+    // Transformation
+    ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+    // 3d attributes
+    export3DSceneAttributes( xPropSet );
+
+    // write 3DScene shape
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aOBJ( mrExport, XML_NAMESPACE_DR3D, XML_SCENE, bCreateNewline, true);
+
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+
+    // write 3DSceneLights
+    export3DLamps( xPropSet );
+
+    // #89764# if export of position is suppressed for group shape,
+    // positions of contained objects should be written relative to
+    // the upper left edge of the group.
+    awt::Point aUpperLeft;
+
+    if(!(nFeatures & XMLShapeExportFlags::POSITION))
+    {
+        nFeatures |= XMLShapeExportFlags::POSITION;
+        aUpperLeft = xShape->getPosition();
+        pRefPoint = &aUpperLeft;
+    }
+
+    // write members
+    exportShapes( xShapes, nFeatures, pRefPoint );
+}
+
+void XMLShapeExport::ImpExport3DShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XmlShapeType eShapeType)
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if(!xPropSet.is())
+        return;
+
+    OUString aStr;
+    OUStringBuffer sStringBuffer;
+
+    // transformation (UNO_NAME_3D_TRANSFORM_MATRIX == "D3DTransformMatrix")
+    uno::Any aAny = xPropSet->getPropertyValue("D3DTransformMatrix");
+    drawing::HomogenMatrix aHomMat;
+    aAny >>= aHomMat;
+    SdXMLImExTransform3D aTransform;
+    aTransform.AddHomogenMatrix(aHomMat);
+    if(aTransform.NeedsAction())
+        mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_TRANSFORM, aTransform.GetExportString(mrExport.GetMM100UnitConverter()));
+
+    switch(eShapeType)
+    {
+        case XmlShapeTypeDraw3DCubeObject:
+        {
+            // minEdge
+            aAny = xPropSet->getPropertyValue("D3DPosition");
+            drawing::Position3D aPosition3D;
+            aAny >>= aPosition3D;
+            ::basegfx::B3DVector aPos3D(aPosition3D.PositionX, aPosition3D.PositionY, aPosition3D.PositionZ);
+
+            // maxEdge
+            aAny = xPropSet->getPropertyValue("D3DSize");
+            drawing::Direction3D aDirection3D;
+            aAny >>= aDirection3D;
+            ::basegfx::B3DVector aDir3D(aDirection3D.DirectionX, aDirection3D.DirectionY, aDirection3D.DirectionZ);
+
+            // transform maxEdge from distance to pos
+            aDir3D = aPos3D + aDir3D;
+
+            // write minEdge
+            if(aPos3D != ::basegfx::B3DVector(-2500.0, -2500.0, -2500.0)) // write only when not default
+            {
+                SvXMLUnitConverter::convertB3DVector(sStringBuffer, aPos3D);
+                aStr = sStringBuffer.makeStringAndClear();
+                mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_MIN_EDGE, aStr);
+            }
+
+            // write maxEdge
+            if(aDir3D != ::basegfx::B3DVector(2500.0, 2500.0, 2500.0)) // write only when not default
+            {
+                SvXMLUnitConverter::convertB3DVector(sStringBuffer, aDir3D);
+                aStr = sStringBuffer.makeStringAndClear();
+                mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_MAX_EDGE, aStr);
+            }
+
+            // write 3DCube shape
+            // #i123542# Do this *after* the attributes are added, else these will be lost since opening
+            // the scope will clear the global attribute list at the exporter
+            SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DR3D, XML_CUBE, true, true);
+
+            break;
+        }
+        case XmlShapeTypeDraw3DSphereObject:
+        {
+            // Center
+            aAny = xPropSet->getPropertyValue("D3DPosition");
+            drawing::Position3D aPosition3D;
+            aAny >>= aPosition3D;
+            ::basegfx::B3DVector aPos3D(aPosition3D.PositionX, aPosition3D.PositionY, aPosition3D.PositionZ);
+
+            // Size
+            aAny = xPropSet->getPropertyValue("D3DSize");
+            drawing::Direction3D aDirection3D;
+            aAny >>= aDirection3D;
+            ::basegfx::B3DVector aDir3D(aDirection3D.DirectionX, aDirection3D.DirectionY, aDirection3D.DirectionZ);
+
+            // write Center
+            if(aPos3D != ::basegfx::B3DVector(0.0, 0.0, 0.0)) // write only when not default
+            {
+                SvXMLUnitConverter::convertB3DVector(sStringBuffer, aPos3D);
+                aStr = sStringBuffer.makeStringAndClear();
+                mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_CENTER, aStr);
+            }
+
+            // write Size
+            if(aDir3D != ::basegfx::B3DVector(5000.0, 5000.0, 5000.0)) // write only when not default
+            {
+                SvXMLUnitConverter::convertB3DVector(sStringBuffer, aDir3D);
+                aStr = sStringBuffer.makeStringAndClear();
+                mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_SIZE, aStr);
+            }
+
+            // write 3DSphere shape
+            // #i123542# Do this *after* the attributes are added, else these will be lost since opening
+            // the scope will clear the global attribute list at the exporter
+            SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DR3D, XML_SPHERE, true, true);
+
+            break;
+        }
+        case XmlShapeTypeDraw3DLatheObject:
+        case XmlShapeTypeDraw3DExtrudeObject:
+        {
+            // write special 3DLathe/3DExtrude attributes, get 3D tools::PolyPolygon as drawing::PolyPolygonShape3D
+            aAny = xPropSet->getPropertyValue("D3DPolyPolygon3D");
+            drawing::PolyPolygonShape3D aUnoPolyPolygon3D;
+            aAny >>= aUnoPolyPolygon3D;
+
+            // convert to 3D PolyPolygon
+            const basegfx::B3DPolyPolygon aPolyPolygon3D(
+                basegfx::utils::UnoPolyPolygonShape3DToB3DPolyPolygon(
+                    aUnoPolyPolygon3D));
+
+            // convert to 2D tools::PolyPolygon using identity 3D transformation (just grep X and Y)
+            const basegfx::B3DHomMatrix aB3DHomMatrixFor2DConversion;
+            const basegfx::B2DPolyPolygon aPolyPolygon(
+                basegfx::utils::createB2DPolyPolygonFromB3DPolyPolygon(
+                    aPolyPolygon3D,
+                    aB3DHomMatrixFor2DConversion));
+
+            // get 2D range of it
+            const basegfx::B2DRange aPolyPolygonRange(aPolyPolygon.getB2DRange());
+
+            // export ViewBox
+            SdXMLImExViewBox aViewBox(
+                aPolyPolygonRange.getMinX(),
+                aPolyPolygonRange.getMinY(),
+                aPolyPolygonRange.getWidth(),
+                aPolyPolygonRange.getHeight());
+
+            mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_VIEWBOX, aViewBox.GetExportString());
+
+            // prepare svg:d string
+            const OUString aPolygonString(
+                basegfx::utils::exportToSvgD(
+                    aPolyPolygon,
+                    true,           // bUseRelativeCoordinates
+                    false,          // bDetectQuadraticBeziers TTTT: not used in old, but maybe activated now
+                    true));         // bHandleRelativeNextPointCompatible
+
+            // write point array
+            mrExport.AddAttribute(XML_NAMESPACE_SVG, XML_D, aPolygonString);
+
+            if(eShapeType == XmlShapeTypeDraw3DLatheObject)
+            {
+                // write 3DLathe shape
+                SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DR3D, XML_ROTATE, true, true);
+            }
+            else
+            {
+                // write 3DExtrude shape
+                SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DR3D, XML_EXTRUDE, true, true);
+            }
+            break;
+        }
+        default:
+            break;
+    }
+}
+
+/** helper for chart that adds all attributes of a 3d scene element to the export */
+void XMLShapeExport::export3DSceneAttributes( const css::uno::Reference< css::beans::XPropertySet >& xPropSet )
+{
+    OUString aStr;
+    OUStringBuffer sStringBuffer;
+
+    // world transformation (UNO_NAME_3D_TRANSFORM_MATRIX == "D3DTransformMatrix")
+    uno::Any aAny = xPropSet->getPropertyValue("D3DTransformMatrix");
+    drawing::HomogenMatrix aHomMat;
+    aAny >>= aHomMat;
+    SdXMLImExTransform3D aTransform;
+    aTransform.AddHomogenMatrix(aHomMat);
+    if(aTransform.NeedsAction())
+        mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_TRANSFORM, aTransform.GetExportString(mrExport.GetMM100UnitConverter()));
+
+    // VRP, VPN, VUP
+    aAny = xPropSet->getPropertyValue("D3DCameraGeometry");
+    drawing::CameraGeometry aCamGeo;
+    aAny >>= aCamGeo;
+
+    ::basegfx::B3DVector aVRP(aCamGeo.vrp.PositionX, aCamGeo.vrp.PositionY, aCamGeo.vrp.PositionZ);
+    if(aVRP != ::basegfx::B3DVector(0.0, 0.0, 1.0)) // write only when not default
+    {
+        SvXMLUnitConverter::convertB3DVector(sStringBuffer, aVRP);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_VRP, aStr);
+    }
+
+    ::basegfx::B3DVector aVPN(aCamGeo.vpn.DirectionX, aCamGeo.vpn.DirectionY, aCamGeo.vpn.DirectionZ);
+    if(aVPN != ::basegfx::B3DVector(0.0, 0.0, 1.0)) // write only when not default
+    {
+        SvXMLUnitConverter::convertB3DVector(sStringBuffer, aVPN);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_VPN, aStr);
+    }
+
+    ::basegfx::B3DVector aVUP(aCamGeo.vup.DirectionX, aCamGeo.vup.DirectionY, aCamGeo.vup.DirectionZ);
+    if(aVUP != ::basegfx::B3DVector(0.0, 1.0, 0.0)) // write only when not default
+    {
+        SvXMLUnitConverter::convertB3DVector(sStringBuffer, aVUP);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_VUP, aStr);
+    }
+
+    // projection "D3DScenePerspective" drawing::ProjectionMode
+    aAny = xPropSet->getPropertyValue("D3DScenePerspective");
+    drawing::ProjectionMode aPrjMode;
+    aAny >>= aPrjMode;
+    if(aPrjMode == drawing::ProjectionMode_PARALLEL)
+        aStr = GetXMLToken(XML_PARALLEL);
+    else
+        aStr = GetXMLToken(XML_PERSPECTIVE);
+    mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_PROJECTION, aStr);
+
+    // distance
+    aAny = xPropSet->getPropertyValue("D3DSceneDistance");
+    sal_Int32 nDistance = 0;
+    aAny >>= nDistance;
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+            nDistance);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_DISTANCE, aStr);
+
+    // focalLength
+    aAny = xPropSet->getPropertyValue("D3DSceneFocalLength");
+    sal_Int32 nFocalLength = 0;
+    aAny >>= nFocalLength;
+    mrExport.GetMM100UnitConverter().convertMeasureToXML(sStringBuffer,
+            nFocalLength);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_FOCAL_LENGTH, aStr);
+
+    // shadowSlant
+    aAny = xPropSet->getPropertyValue("D3DSceneShadowSlant");
+    sal_Int16 nShadowSlant = 0;
+    aAny >>= nShadowSlant;
+    mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_SHADOW_SLANT, OUString::number(static_cast<sal_Int32>(nShadowSlant)));
+
+    // shadeMode
+    aAny = xPropSet->getPropertyValue("D3DSceneShadeMode");
+    drawing::ShadeMode aShadeMode;
+    if(aAny >>= aShadeMode)
+    {
+        if(aShadeMode == drawing::ShadeMode_FLAT)
+            aStr = GetXMLToken(XML_FLAT);
+        else if(aShadeMode == drawing::ShadeMode_PHONG)
+            aStr = GetXMLToken(XML_PHONG);
+        else if(aShadeMode == drawing::ShadeMode_SMOOTH)
+            aStr = GetXMLToken(XML_GOURAUD);
+        else
+            aStr = GetXMLToken(XML_DRAFT);
+    }
+    else
+    {
+        // ShadeMode enum not there, write default
+        aStr = GetXMLToken(XML_GOURAUD);
+    }
+    mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_SHADE_MODE, aStr);
+
+    // ambientColor
+    aAny = xPropSet->getPropertyValue("D3DSceneAmbientColor");
+    sal_Int32 nAmbientColor = 0;
+    aAny >>= nAmbientColor;
+    ::sax::Converter::convertColor(sStringBuffer, nAmbientColor);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_AMBIENT_COLOR, aStr);
+
+    // lightingMode
+    aAny = xPropSet->getPropertyValue("D3DSceneTwoSidedLighting");
+    bool bTwoSidedLighting = false;
+    aAny >>= bTwoSidedLighting;
+    ::sax::Converter::convertBool(sStringBuffer, bTwoSidedLighting);
+    aStr = sStringBuffer.makeStringAndClear();
+    mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_LIGHTING_MODE, aStr);
+}
+
+/** helper for chart that exports all lamps from the propertyset */
+void XMLShapeExport::export3DLamps( const css::uno::Reference< css::beans::XPropertySet >& xPropSet )
+{
+    // write lamps 1..8 as content
+    OUString aStr;
+    OUStringBuffer sStringBuffer;
+
+    static const OUStringLiteral aColorPropName(u"D3DSceneLightColor");
+    static const OUStringLiteral aDirectionPropName(u"D3DSceneLightDirection");
+    static const OUStringLiteral aLightOnPropName(u"D3DSceneLightOn");
+
+    ::basegfx::B3DVector aLightDirection;
+    drawing::Direction3D aLightDir;
+    bool bLightOnOff = false;
+    for(sal_Int32 nLamp = 1; nLamp <= 8; nLamp++)
+    {
+        OUString aIndexStr = OUString::number( nLamp );
+
+        // lightcolor
+        OUString aPropName = aColorPropName + aIndexStr;
+        sal_Int32 nLightColor = 0;
+        xPropSet->getPropertyValue( aPropName ) >>= nLightColor;
+        ::sax::Converter::convertColor(sStringBuffer, nLightColor);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_DIFFUSE_COLOR, aStr);
+
+        // lightdirection
+        aPropName = aDirectionPropName + aIndexStr;
+        xPropSet->getPropertyValue(aPropName) >>= aLightDir;
+        aLightDirection = ::basegfx::B3DVector(aLightDir.DirectionX, aLightDir.DirectionY, aLightDir.DirectionZ);
+        SvXMLUnitConverter::convertB3DVector(sStringBuffer, aLightDirection);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_DIRECTION, aStr);
+
+        // lighton
+        aPropName = aLightOnPropName + aIndexStr;
+        xPropSet->getPropertyValue(aPropName) >>= bLightOnOff;
+        ::sax::Converter::convertBool(sStringBuffer, bLightOnOff);
+        aStr = sStringBuffer.makeStringAndClear();
+        mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_ENABLED, aStr);
+
+        // specular
+        mrExport.AddAttribute(XML_NAMESPACE_DR3D, XML_SPECULAR,
+            nLamp == 1 ? XML_TRUE : XML_FALSE);
+
+        // write light entry
+        SvXMLElementExport aOBJ(mrExport, XML_NAMESPACE_DR3D, XML_LIGHT, true, true);
+    }
+}
+
+
+// using namespace css::io;
+// using namespace ::xmloff::EnhancedCustomShapeToken;
+
+
+static void ExportParameter( OUStringBuffer& rStrBuffer, const css::drawing::EnhancedCustomShapeParameter& rParameter )
+{
+    if ( !rStrBuffer.isEmpty() )
+        rStrBuffer.append( ' ' );
+    if ( rParameter.Value.getValueTypeClass() == uno::TypeClass_DOUBLE )
+    {
+        double fNumber = 0.0;
+        rParameter.Value >>= fNumber;
+        ::rtl::math::doubleToUStringBuffer( rStrBuffer, fNumber, rtl_math_StringFormat_Automatic, rtl_math_DecimalPlaces_Max, '.', true );
+    }
+    else
+    {
+        sal_Int32 nValue = 0;
+        rParameter.Value >>= nValue;
+
+        switch( rParameter.Type )
+        {
+            case css::drawing::EnhancedCustomShapeParameterType::EQUATION :
+            {
+                rStrBuffer.append( "?f" + OUString::number( nValue ) );
+            }
+            break;
+
+            case css::drawing::EnhancedCustomShapeParameterType::ADJUSTMENT :
+            {
+                rStrBuffer.append( '$' );
+                rStrBuffer.append( nValue );
+            }
+            break;
+
+            case css::drawing::EnhancedCustomShapeParameterType::BOTTOM :
+                rStrBuffer.append( GetXMLToken( XML_BOTTOM ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::RIGHT :
+                rStrBuffer.append( GetXMLToken( XML_RIGHT ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::TOP :
+                rStrBuffer.append( GetXMLToken( XML_TOP ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::LEFT :
+                rStrBuffer.append( GetXMLToken( XML_LEFT ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::XSTRETCH :
+                rStrBuffer.append( GetXMLToken( XML_XSTRETCH ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::YSTRETCH :
+                rStrBuffer.append( GetXMLToken( XML_YSTRETCH ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::HASSTROKE :
+                rStrBuffer.append( GetXMLToken( XML_HASSTROKE ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::HASFILL :
+                rStrBuffer.append( GetXMLToken( XML_HASFILL ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::WIDTH :
+                rStrBuffer.append( GetXMLToken( XML_WIDTH ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::HEIGHT :
+                rStrBuffer.append( GetXMLToken( XML_HEIGHT ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::LOGWIDTH :
+                rStrBuffer.append( GetXMLToken( XML_LOGWIDTH ) ); break;
+            case css::drawing::EnhancedCustomShapeParameterType::LOGHEIGHT :
+                rStrBuffer.append( GetXMLToken( XML_LOGHEIGHT ) ); break;
+            default :
+                rStrBuffer.append( nValue );
+        }
+    }
+}
+
+static void ImpExportEquations( SvXMLExport& rExport, const uno::Sequence< OUString >& rEquations )
+{
+    sal_Int32 i;
+    for ( i = 0; i < rEquations.getLength(); i++ )
+    {
+        OUString aStr= "f" + OUString::number( i );
+        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_NAME, aStr );
+
+        aStr = rEquations[ i ];
+        sal_Int32 nIndex = 0;
+        do
+        {
+            nIndex = aStr.indexOf( '?', nIndex );
+            if ( nIndex != -1 )
+            {
+                aStr = OUString::Concat(aStr.subView(0, nIndex + 1)) + "f"
+                    + aStr.subView(nIndex + 1, aStr.getLength() - nIndex - 1);
+                nIndex++;
+            }
+        } while( nIndex != -1 );
+        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_FORMULA, aStr );
+        SvXMLElementExport aOBJ( rExport, XML_NAMESPACE_DRAW, XML_EQUATION, true, true );
+    }
+}
+
+static void ImpExportHandles( SvXMLExport& rExport, const uno::Sequence< beans::PropertyValues >& rHandles )
+{
+    if ( !rHandles.hasElements() )
+        return;
+
+    OUString       aStr;
+    OUStringBuffer aStrBuffer;
+
+    for ( const uno::Sequence< beans::PropertyValue >& rPropSeq : rHandles )
+    {
+        bool bPosition = false;
+        for ( const beans::PropertyValue& rPropVal : rPropSeq )
+        {
+            switch( EASGet( rPropVal.Name ) )
+            {
+                case EAS_Position :
+                {
+                    css::drawing::EnhancedCustomShapeParameterPair aPosition;
+                    if ( rPropVal.Value >>= aPosition )
+                    {
+                        ExportParameter( aStrBuffer, aPosition.First );
+                        ExportParameter( aStrBuffer, aPosition.Second );
+                        aStr = aStrBuffer.makeStringAndClear();
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_POSITION, aStr );
+                        bPosition = true;
+                    }
+                }
+                break;
+                case EAS_MirroredX :
+                {
+                    bool bMirroredX;
+                    if ( rPropVal.Value >>= bMirroredX )
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_MIRROR_HORIZONTAL,
+                            bMirroredX ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                }
+                break;
+                case EAS_MirroredY :
+                {
+                    bool bMirroredY;
+                    if ( rPropVal.Value >>= bMirroredY )
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_MIRROR_VERTICAL,
+                            bMirroredY ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                }
+                break;
+                case EAS_Switched :
+                {
+                    bool bSwitched;
+                    if ( rPropVal.Value >>= bSwitched )
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_SWITCHED,
+                            bSwitched ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                }
+                break;
+                case EAS_Polar :
+                {
+                    css::drawing::EnhancedCustomShapeParameterPair aPolar;
+                    if ( rPropVal.Value >>= aPolar )
+                    {
+                        ExportParameter( aStrBuffer, aPolar.First );
+                        ExportParameter( aStrBuffer, aPolar.Second );
+                        aStr = aStrBuffer.makeStringAndClear();
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_POLAR, aStr );
+                    }
+                }
+                break;
+                case EAS_RadiusRangeMinimum :
+                {
+                    css::drawing::EnhancedCustomShapeParameter aRadiusRangeMinimum;
+                    if ( rPropVal.Value >>= aRadiusRangeMinimum )
+                    {
+                        ExportParameter( aStrBuffer, aRadiusRangeMinimum );
+                        aStr = aStrBuffer.makeStringAndClear();
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_RADIUS_RANGE_MINIMUM, aStr );
+                    }
+                }
+                break;
+                case EAS_RadiusRangeMaximum :
+                {
+                    css::drawing::EnhancedCustomShapeParameter aRadiusRangeMaximum;
+                    if ( rPropVal.Value >>= aRadiusRangeMaximum )
+                    {
+                        ExportParameter( aStrBuffer, aRadiusRangeMaximum );
+                        aStr = aStrBuffer.makeStringAndClear();
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_RADIUS_RANGE_MAXIMUM, aStr );
+                    }
+                }
+                break;
+                case EAS_RangeXMinimum :
+                {
+                    css::drawing::EnhancedCustomShapeParameter aXRangeMinimum;
+                    if ( rPropVal.Value >>= aXRangeMinimum )
+                    {
+                        ExportParameter( aStrBuffer, aXRangeMinimum );
+                        aStr = aStrBuffer.makeStringAndClear();
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_RANGE_X_MINIMUM, aStr );
+                    }
+                }
+                break;
+                case EAS_RangeXMaximum :
+                {
+                    css::drawing::EnhancedCustomShapeParameter aXRangeMaximum;
+                    if ( rPropVal.Value >>= aXRangeMaximum )
+                    {
+                        ExportParameter( aStrBuffer, aXRangeMaximum );
+                        aStr = aStrBuffer.makeStringAndClear();
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_RANGE_X_MAXIMUM, aStr );
+                    }
+                }
+                break;
+                case EAS_RangeYMinimum :
+                {
+                    css::drawing::EnhancedCustomShapeParameter aYRangeMinimum;
+                    if ( rPropVal.Value >>= aYRangeMinimum )
+                    {
+                        ExportParameter( aStrBuffer, aYRangeMinimum );
+                        aStr = aStrBuffer.makeStringAndClear();
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_RANGE_Y_MINIMUM, aStr );
+                    }
+                }
+                break;
+                case EAS_RangeYMaximum :
+                {
+                    css::drawing::EnhancedCustomShapeParameter aYRangeMaximum;
+                    if ( rPropVal.Value >>= aYRangeMaximum )
+                    {
+                        ExportParameter( aStrBuffer, aYRangeMaximum );
+                        aStr = aStrBuffer.makeStringAndClear();
+                        rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_HANDLE_RANGE_Y_MAXIMUM, aStr );
+                    }
+                }
+                break;
+                default:
+                    break;
+            }
+        }
+        if ( bPosition )
+            SvXMLElementExport aOBJ( rExport, XML_NAMESPACE_DRAW, XML_HANDLE, true, true );
+        else
+            rExport.ClearAttrList();
+    }
+}
+
+static void ImpExportEnhancedPath( SvXMLExport& rExport,
+                            const uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair >& rCoordinates,
+                            const uno::Sequence< css::drawing::EnhancedCustomShapeSegment >& rSegments,
+                            bool bExtended = false )
+{
+
+    OUString       aStr;
+    OUStringBuffer aStrBuffer;
+    bool bNeedExtended = false;
+
+    sal_Int32 i, j, k, l;
+
+    sal_Int32 nCoords = rCoordinates.getLength();
+    sal_Int32 nSegments = rSegments.getLength();
+    bool bSimpleSegments = nSegments == 0;
+    if ( bSimpleSegments )
+        nSegments = 4;
+    for ( j = i = 0; j < nSegments; j++ )
+    {
+        css::drawing::EnhancedCustomShapeSegment aSegment;
+        if ( bSimpleSegments )
+        {
+            // if there are not enough segments we will default them
+            switch( j )
+            {
+                case 0 :
+                {
+                    aSegment.Count = 1;
+                    aSegment.Command = css::drawing::EnhancedCustomShapeSegmentCommand::MOVETO;
+                }
+                break;
+                case 1 :
+                {
+                    aSegment.Count = static_cast<sal_Int16>(std::min( nCoords - 1, sal_Int32(32767) ));
+                    aSegment.Command = css::drawing::EnhancedCustomShapeSegmentCommand::LINETO;
+                }
+                break;
+                case 2 :
+                {
+                    aSegment.Count = 1;
+                    aSegment.Command = css::drawing::EnhancedCustomShapeSegmentCommand::CLOSESUBPATH;
+                }
+                break;
+                case 3 :
+                {
+                    aSegment.Count = 1;
+                    aSegment.Command = css::drawing::EnhancedCustomShapeSegmentCommand::ENDSUBPATH;
+                }
+                break;
+            }
+        }
+        else
+            aSegment = rSegments[ j ];
+
+        if ( !aStrBuffer.isEmpty() )
+            aStrBuffer.append( ' ' );
+
+        sal_Int32 nParameter = 0;
+        switch( aSegment.Command )
+        {
+            case css::drawing::EnhancedCustomShapeSegmentCommand::CLOSESUBPATH :
+                aStrBuffer.append( 'Z' ); break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::ENDSUBPATH :
+                aStrBuffer.append( 'N' ); break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::NOFILL :
+                aStrBuffer.append( 'F' ); break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::NOSTROKE :
+                aStrBuffer.append( 'S' ); break;
+
+            case css::drawing::EnhancedCustomShapeSegmentCommand::MOVETO :
+                aStrBuffer.append( 'M' ); nParameter = 1; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::LINETO :
+                aStrBuffer.append( 'L' ); nParameter = 1; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::CURVETO :
+                aStrBuffer.append( 'C' ); nParameter = 3; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::ANGLEELLIPSETO :
+                aStrBuffer.append( 'T' ); nParameter = 3; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::ANGLEELLIPSE :
+                aStrBuffer.append( 'U' ); nParameter = 3; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::ARCTO :
+                aStrBuffer.append( 'A' ); nParameter = 4; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::ARC :
+                aStrBuffer.append( 'B' ); nParameter = 4; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARCTO :
+                aStrBuffer.append( 'W' ); nParameter = 4; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARC :
+                aStrBuffer.append( 'V' ); nParameter = 4; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTX :
+                aStrBuffer.append( 'X' ); nParameter = 1; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTY :
+                aStrBuffer.append( 'Y' ); nParameter = 1; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::QUADRATICCURVETO :
+                aStrBuffer.append( 'Q' ); nParameter = 2; break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::ARCANGLETO :
+                if ( bExtended ) {
+                    aStrBuffer.append( 'G' );
+                    nParameter = 2;
+                } else {
+                    aStrBuffer.setLength( aStrBuffer.getLength() - 1);
+                    bNeedExtended = true;
+                    i += 2;
+                }
+                break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::DARKEN :
+                if ( bExtended )
+                    aStrBuffer.append( 'H' );
+                else
+                    bNeedExtended = true;
+                break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::DARKENLESS :
+                if ( bExtended )
+                    aStrBuffer.append( 'I' );
+                else
+                    bNeedExtended = true;
+                break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::LIGHTEN :
+                if ( bExtended )
+                    aStrBuffer.append( 'J' );
+                else
+                    bNeedExtended = true;
+                break;
+            case css::drawing::EnhancedCustomShapeSegmentCommand::LIGHTENLESS :
+                if ( bExtended )
+                    aStrBuffer.append( 'K' );
+                else
+                    bNeedExtended = true;
+                break;
+            default : // ups, seems to be something wrong
+            {
+                aSegment.Count = 1;
+                aSegment.Command = css::drawing::EnhancedCustomShapeSegmentCommand::LINETO;
+            }
+            break;
+        }
+        if ( nParameter )
+        {
+            for ( k = 0; k < aSegment.Count; k++ )
+            {
+                if ( ( i + nParameter ) <= nCoords )
+                {
+                    for ( l = 0; l < nParameter; l++ )
+                    {
+                        ExportParameter( aStrBuffer, rCoordinates[ i ].First );
+                        ExportParameter( aStrBuffer, rCoordinates[ i++ ].Second );
+                    }
+                }
+                else
+                {
+                    j = nSegments;  // error -> exiting
+                    break;
+                }
+            }
+        }
+    }
+    aStr = aStrBuffer.makeStringAndClear();
+    rExport.AddAttribute( bExtended ? XML_NAMESPACE_DRAW_EXT : XML_NAMESPACE_DRAW, XML_ENHANCED_PATH, aStr );
+    if (!bExtended && bNeedExtended && (rExport.getSaneDefaultVersion() & SvtSaveOptions::ODFSVER_EXTENDED))
+        ImpExportEnhancedPath( rExport, rCoordinates, rSegments, true );
+}
+
+static void ImpExportEnhancedGeometry( SvXMLExport& rExport, const uno::Reference< beans::XPropertySet >& xPropSet )
+{
+    bool bEquations = false;
+    uno::Sequence< OUString > aEquations;
+
+    bool bHandles = false;
+    uno::Sequence< beans::PropertyValues > aHandles;
+
+    uno::Sequence< css::drawing::EnhancedCustomShapeSegment > aSegments;
+    uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair > aCoordinates;
+
+    uno::Sequence< css::drawing::EnhancedCustomShapeAdjustmentValue > aAdjustmentValues;
+
+    OUString       aStr;
+    OUStringBuffer aStrBuffer;
+    SvXMLUnitConverter& rUnitConverter = rExport.GetMM100UnitConverter();
+
+    uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() );
+
+    // geometry
+    static const OUStringLiteral sCustomShapeGeometry( u"CustomShapeGeometry" );
+    if ( xPropSetInfo.is() && xPropSetInfo->hasPropertyByName( sCustomShapeGeometry ) )
+    {
+        uno::Any aGeoPropSet( xPropSet->getPropertyValue( sCustomShapeGeometry ) );
+        uno::Sequence< beans::PropertyValue > aGeoPropSeq;
+
+        if ( aGeoPropSet >>= aGeoPropSeq )
+        {
+            bool bCoordinates = false;
+            OUString aCustomShapeType( "non-primitive" );
+
+            for ( const beans::PropertyValue& rGeoProp : std::as_const(aGeoPropSeq) )
+            {
+                switch( EASGet( rGeoProp.Name ) )
+                {
+                    case EAS_Type :
+                    {
+                        rGeoProp.Value >>= aCustomShapeType;
+                    }
+                    break;
+                    case EAS_MirroredX :
+                    {
+                        bool bMirroredX;
+                        if ( rGeoProp.Value >>= bMirroredX )
+                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_MIRROR_HORIZONTAL,
+                                bMirroredX ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                    }
+                    break;
+                    case EAS_MirroredY :
+                    {
+                        bool bMirroredY;
+                        if ( rGeoProp.Value >>= bMirroredY )
+                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_MIRROR_VERTICAL,
+                                bMirroredY ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                    }
+                    break;
+                    case EAS_ViewBox :
+                    {
+                        awt::Rectangle aRect;
+                        if ( rGeoProp.Value >>= aRect )
+                        {
+                            SdXMLImExViewBox aViewBox( aRect.X, aRect.Y, aRect.Width, aRect.Height );
+                            rExport.AddAttribute( XML_NAMESPACE_SVG, XML_VIEWBOX, aViewBox.GetExportString() );
+                        }
+                    }
+                    break;
+                    case EAS_TextPreRotateAngle :
+                    case EAS_TextRotateAngle :
+                    {
+                        double fTextRotateAngle = 0;
+                        if ( ( rGeoProp.Value >>= fTextRotateAngle ) && fTextRotateAngle != 0 )
+                        {
+                            ::sax::Converter::convertDouble(
+                                    aStrBuffer, fTextRotateAngle );
+                            aStr = aStrBuffer.makeStringAndClear();
+                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_TEXT_ROTATE_ANGLE, aStr );
+                        }
+                    }
+                    break;
+                    case EAS_Extrusion :
+                    {
+                        uno::Sequence< beans::PropertyValue > aExtrusionPropSeq;
+                        if ( rGeoProp.Value >>= aExtrusionPropSeq )
+                        {
+                            bool bSkewValuesProvided = false;
+                            for ( const beans::PropertyValue& rProp : std::as_const(aExtrusionPropSeq) )
+                            {
+                                switch( EASGet( rProp.Name ) )
+                                {
+                                    case EAS_Extrusion :
+                                    {
+                                        bool bExtrusionOn;
+                                        if ( rProp.Value >>= bExtrusionOn )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION,
+                                                bExtrusionOn ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    case EAS_Brightness :
+                                    {
+                                        double fExtrusionBrightness = 0;
+                                        if ( rProp.Value >>= fExtrusionBrightness )
+                                        {
+                                            ::sax::Converter::convertDouble(
+                                                aStrBuffer,
+                                                fExtrusionBrightness,
+                                                false,
+                                                util::MeasureUnit::PERCENT,
+                                                util::MeasureUnit::PERCENT);
+                                            aStrBuffer.append( '%' );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_BRIGHTNESS, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_Depth :
+                                    {
+                                        css::drawing::EnhancedCustomShapeParameterPair aDepthParaPair;
+                                        if ( rProp.Value >>= aDepthParaPair )
+                                        {
+                                            double fDepth = 0;
+                                            if ( aDepthParaPair.First.Value >>= fDepth )
+                                            {
+                                                rExport.GetMM100UnitConverter().convertDouble( aStrBuffer, fDepth );
+                                                ExportParameter( aStrBuffer, aDepthParaPair.Second );
+                                                aStr = aStrBuffer.makeStringAndClear();
+                                                rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_DEPTH, aStr );
+                                            }
+                                        }
+                                    }
+                                    break;
+                                    case EAS_Diffusion :
+                                    {
+                                        double fExtrusionDiffusion = 0;
+                                        if ( rProp.Value >>= fExtrusionDiffusion )
+                                        {
+                                            ::sax::Converter::convertDouble(
+                                                aStrBuffer,
+                                                fExtrusionDiffusion,
+                                                false,
+                                                util::MeasureUnit::PERCENT,
+                                                util::MeasureUnit::PERCENT);
+                                            aStrBuffer.append( '%' );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_DIFFUSION, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_NumberOfLineSegments :
+                                    {
+                                        sal_Int32 nExtrusionNumberOfLineSegments = 0;
+                                        if ( rProp.Value >>= nExtrusionNumberOfLineSegments )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_NUMBER_OF_LINE_SEGMENTS, OUString::number( nExtrusionNumberOfLineSegments ) );
+                                    }
+                                    break;
+                                    case EAS_LightFace :
+                                    {
+                                        bool bExtrusionLightFace;
+                                        if ( rProp.Value >>= bExtrusionLightFace )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_LIGHT_FACE,
+                                                bExtrusionLightFace ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    case EAS_FirstLightHarsh :
+                                    {
+                                        bool bExtrusionFirstLightHarsh;
+                                        if ( rProp.Value >>= bExtrusionFirstLightHarsh )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_FIRST_LIGHT_HARSH,
+                                                bExtrusionFirstLightHarsh ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    case EAS_SecondLightHarsh :
+                                    {
+                                        bool bExtrusionSecondLightHarsh;
+                                        if ( rProp.Value >>= bExtrusionSecondLightHarsh )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_SECOND_LIGHT_HARSH,
+                                                bExtrusionSecondLightHarsh ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    case EAS_FirstLightLevel :
+                                    {
+                                        double fExtrusionFirstLightLevel = 0;
+                                        if ( rProp.Value >>= fExtrusionFirstLightLevel )
+                                        {
+                                            ::sax::Converter::convertDouble(
+                                                aStrBuffer,
+                                                fExtrusionFirstLightLevel,
+                                                false,
+                                                util::MeasureUnit::PERCENT,
+                                                util::MeasureUnit::PERCENT);
+                                            aStrBuffer.append( '%' );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_FIRST_LIGHT_LEVEL, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_SecondLightLevel :
+                                    {
+                                        double fExtrusionSecondLightLevel = 0;
+                                        if ( rProp.Value >>= fExtrusionSecondLightLevel )
+                                        {
+                                            ::sax::Converter::convertDouble(
+                                                aStrBuffer,
+                                                fExtrusionSecondLightLevel,
+                                                false,
+                                                util::MeasureUnit::PERCENT,
+                                                util::MeasureUnit::PERCENT);
+                                            aStrBuffer.append( '%' );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_SECOND_LIGHT_LEVEL, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_FirstLightDirection :
+                                    {
+                                        drawing::Direction3D aExtrusionFirstLightDirection;
+                                        if ( rProp.Value >>= aExtrusionFirstLightDirection )
+                                        {
+                                            ::basegfx::B3DVector aVec3D( aExtrusionFirstLightDirection.DirectionX, aExtrusionFirstLightDirection.DirectionY,
+                                                aExtrusionFirstLightDirection.DirectionZ );
+                                            SvXMLUnitConverter::convertB3DVector( aStrBuffer, aVec3D );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_FIRST_LIGHT_DIRECTION, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_SecondLightDirection :
+                                    {
+                                        drawing::Direction3D aExtrusionSecondLightDirection;
+                                        if ( rProp.Value >>= aExtrusionSecondLightDirection )
+                                        {
+                                            ::basegfx::B3DVector aVec3D( aExtrusionSecondLightDirection.DirectionX, aExtrusionSecondLightDirection.DirectionY,
+                                                aExtrusionSecondLightDirection.DirectionZ );
+                                            SvXMLUnitConverter::convertB3DVector( aStrBuffer, aVec3D );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_SECOND_LIGHT_DIRECTION, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_Metal :
+                                    {
+                                        bool bExtrusionMetal;
+                                        if ( rProp.Value >>= bExtrusionMetal )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_METAL,
+                                                bExtrusionMetal ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    case EAS_MetalType :
+                                    {
+                                        // export only if ODF extensions are enabled
+                                        sal_Int16 eMetalType;
+                                        if (rProp.Value >>= eMetalType)
+                                        {
+                                            SvtSaveOptions::ODFSaneDefaultVersion eVersion = rExport.getSaneDefaultVersion();
+                                            if (eVersion > SvtSaveOptions::ODFSVER_013
+                                                && (eVersion & SvtSaveOptions::ODFSVER_EXTENDED))
+                                            {
+                                                if (eMetalType == drawing::EnhancedCustomShapeMetalType::MetalMSCompatible)
+                                                    aStr = "loext:MetalMSCompatible";
+                                                else
+                                                    aStr = "draw:MetalODF";
+                                                rExport.AddAttribute(XML_NAMESPACE_LO_EXT, XML_EXTRUSION_METAL_TYPE, aStr);
+                                            }
+                                        }
+                                    }
+                                    break;
+                                    case EAS_ShadeMode :
+                                    {
+                                        // shadeMode
+                                        drawing::ShadeMode eShadeMode;
+                                        if( rProp.Value >>= eShadeMode )
+                                        {
+                                            if( eShadeMode == drawing::ShadeMode_FLAT )
+                                                aStr = GetXMLToken( XML_FLAT );
+                                            else if( eShadeMode == drawing::ShadeMode_PHONG )
+                                                aStr = GetXMLToken( XML_PHONG );
+                                            else if( eShadeMode == drawing::ShadeMode_SMOOTH )
+                                                aStr = GetXMLToken( XML_GOURAUD );
+                                            else
+                                                aStr = GetXMLToken( XML_DRAFT );
+                                        }
+                                        else
+                                        {
+                                            // ShadeMode enum not there, write default
+                                            aStr = GetXMLToken( XML_FLAT);
+                                        }
+                                        rExport.AddAttribute( XML_NAMESPACE_DR3D, XML_SHADE_MODE, aStr );
+                                    }
+                                    break;
+                                    case EAS_RotateAngle :
+                                    {
+                                        css::drawing::EnhancedCustomShapeParameterPair aRotateAngleParaPair;
+                                        if ( rProp.Value >>= aRotateAngleParaPair )
+                                        {
+                                            ExportParameter( aStrBuffer, aRotateAngleParaPair.First );
+                                            ExportParameter( aStrBuffer, aRotateAngleParaPair.Second );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_ROTATION_ANGLE, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_RotationCenter :
+                                    {
+                                        drawing::Direction3D aExtrusionRotationCenter;
+                                        if ( rProp.Value >>= aExtrusionRotationCenter )
+                                        {
+                                            ::basegfx::B3DVector aVec3D( aExtrusionRotationCenter.DirectionX, aExtrusionRotationCenter.DirectionY,
+                                                aExtrusionRotationCenter.DirectionZ );
+                                            SvXMLUnitConverter::convertB3DVector( aStrBuffer, aVec3D );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_ROTATION_CENTER, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_Shininess :
+                                    {
+                                        double fExtrusionShininess = 0;
+                                        if ( rProp.Value >>= fExtrusionShininess )
+                                        {
+                                            ::sax::Converter::convertDouble(
+                                                aStrBuffer,
+                                                fExtrusionShininess,
+                                                false,
+                                                util::MeasureUnit::PERCENT,
+                                                util::MeasureUnit::PERCENT);
+                                            aStrBuffer.append( '%' );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_SHININESS, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_Skew :
+                                    {
+                                        css::drawing::EnhancedCustomShapeParameterPair aSkewParaPair;
+                                        if ( rProp.Value >>= aSkewParaPair )
+                                        {
+                                            bSkewValuesProvided = true;
+                                            ExportParameter( aStrBuffer, aSkewParaPair.First );
+                                            ExportParameter( aStrBuffer, aSkewParaPair.Second );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_SKEW, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_Specularity :
+                                    {
+                                        double fExtrusionSpecularity = 0;
+                                        if ( rProp.Value >>= fExtrusionSpecularity )
+                                        {
+                                            SvtSaveOptions::ODFSaneDefaultVersion eVersion = rExport.getSaneDefaultVersion();
+                                            if (fExtrusionSpecularity > 100.0 && eVersion >= SvtSaveOptions::ODFSVER_012
+                                                && (eVersion & SvtSaveOptions::ODFSVER_EXTENDED))
+                                            {
+                                                // tdf#147580 write values > 100% in loext
+                                                ::sax::Converter::convertDouble(
+                                                    aStrBuffer,
+                                                    fExtrusionSpecularity,
+                                                    false,
+                                                    util::MeasureUnit::PERCENT,
+                                                    util::MeasureUnit::PERCENT);
+                                                aStrBuffer.append( '%' );
+                                                aStr = aStrBuffer.makeStringAndClear();
+                                                rExport.AddAttribute( XML_NAMESPACE_LO_EXT, XML_EXTRUSION_SPECULARITY_LOEXT, aStr );
+                                            }
+                                            // tdf#147580 ODF 1 allows arbitrary percent, later versions not
+                                            if (eVersion >= SvtSaveOptions::ODFSVER_012)
+                                            {
+                                                fExtrusionSpecularity = std::clamp<double>(fExtrusionSpecularity, 0.0, 100.0);
+                                            }
+                                            ::sax::Converter::convertDouble(
+                                                aStrBuffer,
+                                                fExtrusionSpecularity,
+                                                false,
+                                                util::MeasureUnit::PERCENT,
+                                                util::MeasureUnit::PERCENT);
+                                            aStrBuffer.append( '%' );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_SPECULARITY, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_ProjectionMode :
+                                    {
+                                        drawing::ProjectionMode eProjectionMode;
+                                        if ( rProp.Value >>= eProjectionMode )
+                                            rExport.AddAttribute( XML_NAMESPACE_DR3D, XML_PROJECTION,
+                                                eProjectionMode == drawing::ProjectionMode_PARALLEL ? GetXMLToken( XML_PARALLEL ) : GetXMLToken( XML_PERSPECTIVE ) );
+                                    }
+                                    break;
+                                    case EAS_ViewPoint :
+                                    {
+                                        drawing::Position3D aExtrusionViewPoint;
+                                        if ( rProp.Value >>= aExtrusionViewPoint )
+                                        {
+                                            rUnitConverter.convertPosition3D( aStrBuffer, aExtrusionViewPoint );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_VIEWPOINT, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_Origin :
+                                    {
+                                        css::drawing::EnhancedCustomShapeParameterPair aOriginParaPair;
+                                        if ( rProp.Value >>= aOriginParaPair )
+                                        {
+                                            ExportParameter( aStrBuffer, aOriginParaPair.First );
+                                            ExportParameter( aStrBuffer, aOriginParaPair.Second );
+                                            aStr = aStrBuffer.makeStringAndClear();
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_ORIGIN, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_Color :
+                                    {
+                                        bool bExtrusionColor;
+                                        if ( rProp.Value >>= bExtrusionColor )
+                                        {
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_COLOR,
+                                                bExtrusionColor ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                        }
+                                    }
+                                    break;
+                                    default:
+                                        break;
+                                }
+                            }
+                            // tdf#141301: no specific skew values provided
+                            if (!bSkewValuesProvided)
+                            {
+                                // so we need to export default values explicitly
+                                rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_SKEW, "50 -135");
+                            }
+                        }
+                    }
+                    break;
+                    case EAS_TextPath :
+                    {
+                        uno::Sequence< beans::PropertyValue > aTextPathPropSeq;
+                        if ( rGeoProp.Value >>= aTextPathPropSeq )
+                        {
+                            for ( const beans::PropertyValue& rProp : std::as_const(aTextPathPropSeq) )
+                            {
+                                switch( EASGet( rProp.Name ) )
+                                {
+                                    case EAS_TextPath :
+                                    {
+                                        bool bTextPathOn;
+                                        if ( rProp.Value >>= bTextPathOn )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_TEXT_PATH,
+                                                bTextPathOn ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    case EAS_TextPathMode :
+                                    {
+                                        css::drawing::EnhancedCustomShapeTextPathMode eTextPathMode;
+                                        if ( rProp.Value >>= eTextPathMode )
+                                        {
+                                            switch ( eTextPathMode )
+                                            {
+                                                case css::drawing::EnhancedCustomShapeTextPathMode_NORMAL: aStr = GetXMLToken( XML_NORMAL ); break;
+                                                case css::drawing::EnhancedCustomShapeTextPathMode_PATH  : aStr = GetXMLToken( XML_PATH );   break;
+                                                case css::drawing::EnhancedCustomShapeTextPathMode_SHAPE : aStr = GetXMLToken( XML_SHAPE );  break;
+                                                default:
+                                                    break;
+                                            }
+                                            if ( !aStr.isEmpty() )
+                                                rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_TEXT_PATH_MODE, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_ScaleX :
+                                    {
+                                        bool bScaleX;
+                                        if ( rProp.Value >>= bScaleX )
+                                        {
+                                            aStr = bScaleX ? GetXMLToken( XML_SHAPE ) : GetXMLToken( XML_PATH );
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_TEXT_PATH_SCALE, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_SameLetterHeights :
+                                    {
+                                        bool bSameLetterHeights;
+                                        if ( rProp.Value >>= bSameLetterHeights )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_TEXT_PATH_SAME_LETTER_HEIGHTS,
+                                                bSameLetterHeights ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    default:
+                                        break;
+                                }
+                            }
+                        }
+                    }
+                    break;
+                    case EAS_Path :
+                    {
+                        uno::Sequence< beans::PropertyValue > aPathPropSeq;
+                        if ( rGeoProp.Value >>= aPathPropSeq )
+                        {
+                            for ( const beans::PropertyValue& rProp : std::as_const(aPathPropSeq) )
+                            {
+                                switch( EASGet( rProp.Name ) )
+                                {
+                                    case EAS_SubViewSize:
+                                    {
+                                        // export draw:sub-view-size (do not export in ODF 1.3 or older)
+                                        if ((rExport.getSaneDefaultVersion() & SvtSaveOptions::ODFSVER_EXTENDED) == 0)
+                                        {
+                                            continue;
+                                        }
+                                        uno::Sequence< awt::Size > aSubViewSizes;
+                                        rProp.Value >>= aSubViewSizes;
+
+                                        for ( int nIdx = 0; nIdx < aSubViewSizes.getLength(); nIdx++ )
+                                        {
+                                            if ( nIdx )
+                                                aStrBuffer.append(' ');
+                                            aStrBuffer.append( aSubViewSizes[nIdx].Width );
+                                            aStrBuffer.append(' ');
+                                            aStrBuffer.append( aSubViewSizes[nIdx].Height );
+                                        }
+                                        aStr = aStrBuffer.makeStringAndClear();
+                                        rExport.AddAttribute( XML_NAMESPACE_DRAW_EXT, XML_SUB_VIEW_SIZE, aStr );
+                                    }
+                                    break;
+                                    case EAS_ExtrusionAllowed :
+                                    {
+                                        bool bExtrusionAllowed;
+                                        if ( rProp.Value >>= bExtrusionAllowed )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_EXTRUSION_ALLOWED,
+                                                bExtrusionAllowed ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    case EAS_ConcentricGradientFillAllowed :
+                                    {
+                                        bool bConcentricGradientFillAllowed;
+                                        if ( rProp.Value >>= bConcentricGradientFillAllowed )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_CONCENTRIC_GRADIENT_FILL_ALLOWED,
+                                                bConcentricGradientFillAllowed ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    case EAS_TextPathAllowed  :
+                                    {
+                                        bool bTextPathAllowed;
+                                        if ( rProp.Value >>= bTextPathAllowed )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_TEXT_PATH_ALLOWED,
+                                                bTextPathAllowed ? GetXMLToken( XML_TRUE ) : GetXMLToken( XML_FALSE ) );
+                                    }
+                                    break;
+                                    case EAS_GluePoints :
+                                    {
+                                        css::uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair> aGluePoints;
+                                        if ( rProp.Value >>= aGluePoints )
+                                        {
+                                            if ( aGluePoints.hasElements() )
+                                            {
+                                                for( const auto& rGluePoint : std::as_const(aGluePoints) )
+                                                {
+                                                    ExportParameter( aStrBuffer, rGluePoint.First );
+                                                    ExportParameter( aStrBuffer, rGluePoint.Second );
+                                                }
+                                                aStr = aStrBuffer.makeStringAndClear();
+                                            }
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_GLUE_POINTS, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_GluePointType :
+                                    {
+                                        sal_Int16 nGluePointType = sal_Int16();
+                                        if ( rProp.Value >>= nGluePointType )
+                                        {
+                                            switch ( nGluePointType )
+                                            {
+                                                case css::drawing::EnhancedCustomShapeGluePointType::NONE     : aStr = GetXMLToken( XML_NONE );    break;
+                                                case css::drawing::EnhancedCustomShapeGluePointType::SEGMENTS : aStr = GetXMLToken( XML_SEGMENTS ); break;
+                                                case css::drawing::EnhancedCustomShapeGluePointType::RECT     : aStr = GetXMLToken( XML_RECTANGLE ); break;
+                                            }
+                                            if ( !aStr.isEmpty() )
+                                                rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_GLUE_POINT_TYPE, aStr );
+                                        }
+                                    }
+                                    break;
+                                    case EAS_Coordinates :
+                                    {
+                                        bCoordinates = ( rProp.Value >>= aCoordinates );
+                                    }
+                                    break;
+                                    case EAS_Segments :
+                                    {
+                                        rProp.Value >>= aSegments;
+                                    }
+                                    break;
+                                    case EAS_StretchX :
+                                    {
+                                        sal_Int32 nStretchPoint = 0;
+                                        if ( rProp.Value >>= nStretchPoint )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_PATH_STRETCHPOINT_X, OUString::number( nStretchPoint ) );
+                                    }
+                                    break;
+                                    case EAS_StretchY :
+                                    {
+                                        sal_Int32 nStretchPoint = 0;
+                                        if ( rProp.Value >>= nStretchPoint )
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_PATH_STRETCHPOINT_Y, OUString::number( nStretchPoint ) );
+                                    }
+                                    break;
+                                    case EAS_TextFrames :
+                                    {
+                                        css::uno::Sequence< css::drawing::EnhancedCustomShapeTextFrame > aPathTextFrames;
+                                        if ( rProp.Value >>= aPathTextFrames )
+                                        {
+                                            if ( aPathTextFrames.hasElements() )
+                                            {
+                                                for ( const auto& rPathTextFrame : std::as_const(aPathTextFrames) )
+                                                {
+                                                    ExportParameter( aStrBuffer, rPathTextFrame.TopLeft.First );
+                                                    ExportParameter( aStrBuffer, rPathTextFrame.TopLeft.Second );
+                                                    ExportParameter( aStrBuffer, rPathTextFrame.BottomRight.First );
+                                                    ExportParameter( aStrBuffer, rPathTextFrame.BottomRight.Second );
+                                                }
+                                                aStr = aStrBuffer.makeStringAndClear();
+                                            }
+                                            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_TEXT_AREAS, aStr );
+                                        }
+                                    }
+                                    break;
+                                    default:
+                                        break;
+                                }
+                            }
+                        }
+                    }
+                    break;
+                    case EAS_Equations :
+                    {
+                        bEquations = ( rGeoProp.Value >>= aEquations );
+                    }
+                    break;
+                    case EAS_Handles :
+                    {
+                        bHandles = ( rGeoProp.Value >>= aHandles );
+                    }
+                    break;
+                    case EAS_AdjustmentValues :
+                    {
+                        rGeoProp.Value >>= aAdjustmentValues;
+                    }
+                    break;
+                    default:
+                        break;
+                }
+            }   // for
+            rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_TYPE, aCustomShapeType );
+
+            // adjustments
+            sal_Int32 nAdjustmentValues = aAdjustmentValues.getLength();
+            if ( nAdjustmentValues )
+            {
+                sal_Int32 i, nValue = 0;
+                for ( i = 0; i < nAdjustmentValues; i++ )
+                {
+                    if ( i )
+                        aStrBuffer.append( ' ' );
+
+                    const css::drawing::EnhancedCustomShapeAdjustmentValue& rAdj = aAdjustmentValues[ i ];
+                    if ( rAdj.State == beans::PropertyState_DIRECT_VALUE )
+                    {
+                        if ( rAdj.Value.getValueTypeClass() == uno::TypeClass_DOUBLE )
+                        {
+                            double fValue = 0.0;
+                            rAdj.Value >>= fValue;
+                            ::sax::Converter::convertDouble(aStrBuffer, fValue);
+                        }
+                        else
+                        {
+                            rAdj.Value >>= nValue;
+                            aStrBuffer.append(nValue);
+                        }
+                    }
+                    else
+                    {
+                        // this should not be, but better than setting nothing
+                        aStrBuffer.append("0");
+                    }
+                }
+                aStr = aStrBuffer.makeStringAndClear();
+                rExport.AddAttribute( XML_NAMESPACE_DRAW, XML_MODIFIERS, aStr );
+            }
+            if ( bCoordinates )
+                ImpExportEnhancedPath( rExport, aCoordinates, aSegments );
+        }
+    }
+    SvXMLElementExport aOBJ( rExport, XML_NAMESPACE_DRAW, XML_ENHANCED_GEOMETRY, true, true );
+    if ( bEquations )
+        ImpExportEquations( rExport, aEquations );
+    if ( bHandles )
+        ImpExportHandles( rExport, aHandles );
+}
+
+void XMLShapeExport::ImpExportCustomShape(
+    const uno::Reference< drawing::XShape >& xShape,
+    XMLShapeExportFlags nFeatures, css::awt::Point* pRefPoint )
+{
+    const uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    if ( !xPropSet.is() )
+        return;
+
+    uno::Reference< beans::XPropertySetInfo > xPropSetInfo( xPropSet->getPropertySetInfo() );
+
+    // Transformation
+    ImpExportNewTrans( xPropSet, nFeatures, pRefPoint );
+
+    if ( xPropSetInfo.is() )
+    {
+        OUString aStr;
+        if ( xPropSetInfo->hasPropertyByName( "CustomShapeEngine" ) )
+        {
+            uno::Any aEngine( xPropSet->getPropertyValue( "CustomShapeEngine" ) );
+            if ( ( aEngine >>= aStr ) && !aStr.isEmpty() )
+                mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_ENGINE, aStr );
+        }
+        if ( xPropSetInfo->hasPropertyByName( "CustomShapeData" ) )
+        {
+            uno::Any aData( xPropSet->getPropertyValue( "CustomShapeData" ) );
+            if ( ( aData >>= aStr ) && !aStr.isEmpty() )
+                mrExport.AddAttribute( XML_NAMESPACE_DRAW, XML_DATA, aStr );
+        }
+    }
+    bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE ); // #86116#/#92210#
+    SvXMLElementExport aOBJ( mrExport, XML_NAMESPACE_DRAW, XML_CUSTOM_SHAPE, bCreateNewline, true );
+    ImpExportDescription( xShape ); // #i68101#
+    ImpExportEvents( xShape );
+    ImpExportGluePoints( xShape );
+    ImpExportText( xShape );
+    ImpExportEnhancedGeometry( mrExport, xPropSet );
+
+}
+
+void XMLShapeExport::ImpExportTableShape( const uno::Reference< drawing::XShape >& xShape, XmlShapeType eShapeType, XMLShapeExportFlags nFeatures, css::awt::Point* pRefPoint )
+{
+    uno::Reference< beans::XPropertySet > xPropSet(xShape, uno::UNO_QUERY);
+    uno::Reference< container::XNamed > xNamed(xShape, uno::UNO_QUERY);
+
+    SAL_WARN_IF( !xPropSet.is() || !xNamed.is(), "xmloff", "xmloff::XMLShapeExport::ImpExportTableShape(), table shape is not implementing needed interfaces");
+    if(!(xPropSet.is() && xNamed.is()))
+        return;
+
+    try
+    {
+        // Transformation
+        ImpExportNewTrans(xPropSet, nFeatures, pRefPoint);
+
+        bool bIsEmptyPresObj = false;
+
+        // presentation settings
+        if(eShapeType == XmlShapeTypePresTableShape)
+            bIsEmptyPresObj = ImpExportPresentationAttributes( xPropSet, GetXMLToken(XML_TABLE) );
+
+        const bool bCreateNewline( (nFeatures & XMLShapeExportFlags::NO_WS) == XMLShapeExportFlags::NONE );
+        const bool bExportEmbedded(mrExport.getExportFlags() & SvXMLExportFlags::EMBEDDED);
+
+        SvXMLElementExport aElement( mrExport, XML_NAMESPACE_DRAW, XML_FRAME, bCreateNewline, true );
+
+        // do not export in ODF 1.1 or older
+        if (mrExport.getSaneDefaultVersion() >= SvtSaveOptions::ODFSVER_012)
+        {
+            if( !bIsEmptyPresObj )
+            {
+                uno::Reference< container::XNamed > xTemplate( xPropSet->getPropertyValue("TableTemplate"), uno::UNO_QUERY );
+                if( xTemplate.is() )
+                {
+                    const OUString sTemplate( xTemplate->getName() );
+                    if( !sTemplate.isEmpty() )
+                    {
+                        mrExport.AddAttribute(XML_NAMESPACE_TABLE, XML_TEMPLATE_NAME, sTemplate );
+
+                        for( const XMLPropertyMapEntry* pEntry = &aXMLTableShapeAttributes[0]; pEntry->msApiName; pEntry++ )
+                        {
+                            try
+                            {
+                                bool bBool = false;
+                                const OUString sAPIPropertyName( pEntry->msApiName, pEntry->nApiNameLength, RTL_TEXTENCODING_ASCII_US );
+
+                                xPropSet->getPropertyValue( sAPIPropertyName ) >>= bBool;
+                                if( bBool )
+                                    mrExport.AddAttribute(pEntry->mnNameSpace, pEntry->meXMLName, XML_TRUE );
+                            }
+                            catch( uno::Exception& )
+                            {
+                                DBG_UNHANDLED_EXCEPTION("xmloff.draw");
+                            }
+                        }
+                    }
+                }
+
+                uno::Reference< table::XColumnRowRange > xRange( xPropSet->getPropertyValue( gsModel ), uno::UNO_QUERY_THROW );
+                GetShapeTableExport()->exportTable( xRange );
+            }
+        }
+
+        if( !bIsEmptyPresObj )
+        {
+            uno::Reference< graphic::XGraphic > xGraphic( xPropSet->getPropertyValue("ReplacementGraphic"), uno::UNO_QUERY );
+            if( xGraphic.is() ) try
+            {
+                uno::Reference< uno::XComponentContext > xContext = GetExport().getComponentContext();
+
+                uno::Reference< embed::XStorage > xPictureStorage;
+                uno::Reference< embed::XStorage > xStorage;
+                uno::Reference< io::XStream > xPictureStream;
+
+                OUString sPictureName;
+                if( bExportEmbedded )
+                {
+                    xPictureStream.set( xContext->getServiceManager()->createInstanceWithContext( "com.sun.star.comp.MemoryStream", xContext), uno::UNO_QUERY_THROW );
+                }
+                else
+                {
+                    xStorage.set( GetExport().GetTargetStorage(), uno::UNO_SET_THROW );
+
+                    xPictureStorage.set( xStorage->openStorageElement( "Pictures" , ::embed::ElementModes::READWRITE ), uno::UNO_SET_THROW );
+
+                    sal_Int32 nIndex = 0;
+                    do
+                    {
+                        sPictureName = "TablePreview" + OUString::number( ++nIndex ) + ".svm";
+                    }
+                    while( xPictureStorage->hasByName( sPictureName ) );
+
+                    xPictureStream.set( xPictureStorage->openStreamElement( sPictureName, ::embed::ElementModes::READWRITE ), uno::UNO_SET_THROW );
+                }
+
+                uno::Reference< graphic::XGraphicProvider > xProvider( graphic::GraphicProvider::create(xContext) );
+                uno::Sequence< beans::PropertyValue > aArgs{
+                    comphelper::makePropertyValue("MimeType", OUString( "image/x-vclgraphic" )),
+                    comphelper::makePropertyValue("OutputStream", xPictureStream->getOutputStream())
+                };
+                xProvider->storeGraphic( xGraphic, aArgs );
+
+                if( xPictureStorage.is() )
+                {
+                    uno::Reference< embed::XTransactedObject > xTrans( xPictureStorage, uno::UNO_QUERY );
+                    if( xTrans.is() )
+                        xTrans->commit();
+                }
+
+                if( !bExportEmbedded )
+                {
+                    OUString sURL = "Pictures/" + sPictureName;
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_HREF, sURL );
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_TYPE, XML_SIMPLE );
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_SHOW, XML_EMBED );
+                    mrExport.AddAttribute( XML_NAMESPACE_XLINK, XML_ACTUATE, XML_ONLOAD );
+                }
+
+                SvXMLElementExport aElem( GetExport(), XML_NAMESPACE_DRAW, XML_IMAGE, false, true );
+
+                if( bExportEmbedded )
+                {
+                    uno::Reference< io::XSeekableInputStream > xSeekable( xPictureStream, uno::UNO_QUERY_THROW );
+                    xSeekable->seek(0);
+
+                    XMLBase64Export aBase64Exp( GetExport() );
+                    aBase64Exp.exportOfficeBinaryDataElement( uno::Reference < io::XInputStream >( xPictureStream, uno::UNO_QUERY_THROW ) );
+                }
+            }
+            catch( uno::Exception const & )
+            {
+                DBG_UNHANDLED_EXCEPTION("xmloff.draw");
+            }
+        }
+
+        ImpExportEvents( xShape );
+        ImpExportGluePoints( xShape );
+        ImpExportDescription( xShape ); // #i68101#
+    }
+    catch( uno::Exception const & )
+    {
+        DBG_UNHANDLED_EXCEPTION("xmloff.draw");
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */