diff options
Diffstat (limited to 'chart2/inc/strings.hrc')
| -rw-r--r-- | chart2/inc/strings.hrc | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/chart2/inc/strings.hrc b/chart2/inc/strings.hrc new file mode 100644 index 000000000..ab6ca48c8 --- /dev/null +++ b/chart2/inc/strings.hrc @@ -0,0 +1,197 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ +#ifndef CHART_STRINGS_HRC +#define CHART_STRINGS_HRC + +#define NC_(Context, String) TranslateId(Context, reinterpret_cast<char const *>(u8##String)) + +#define STR_DLG_CHART_WIZARD NC_("STR_DLG_CHART_WIZARD", "Chart Wizard") +#define STR_DLG_SMOOTH_LINE_PROPERTIES NC_("STR_DLG_SMOOTH_LINE_PROPERTIES", "Smooth Lines") +#define STR_DLG_STEPPED_LINE_PROPERTIES NC_("STR_DLG_STEPPED_LINE_PROPERTIES", "Stepped Lines") +#define STR_DLG_REMOVE_DATA_TABLE NC_("STR_DLG_REMOVE_DATA_TABLE", "This chart currently contains an internal data table. Do you want to proceed, deleting the internal data table, and set a new data range?") +#define STR_PAGE_CHARTTYPE NC_("STR_PAGE_CHARTTYPE", "Chart Type") +#define STR_PAGE_DATA_RANGE NC_("STR_PAGE_DATA_RANGE", "Data Range") +#define STR_PAGE_CHART_ELEMENTS NC_("STR_PAGE_CHART_ELEMENTS", "Chart Elements") +#define STR_PAGE_LINE NC_("STR_PAGE_LINE", "Line") +#define STR_PAGE_BORDER NC_("STR_PAGE_BORDER", "Borders") +#define STR_PAGE_AREA NC_("STR_PAGE_AREA", "Area") +#define STR_PAGE_TRANSPARENCY NC_("STR_PAGE_TRANSPARENCY", "Transparency") +#define STR_PAGE_FONT NC_("STR_PAGE_FONT", "Font") +#define STR_PAGE_FONT_EFFECTS NC_("STR_PAGE_FONT_EFFECTS", "Font Effects") +#define STR_PAGE_NUMBERS NC_("STR_PAGE_NUMBERS", "Numbers") +#define STR_PAGE_POSITION NC_("STR_PAGE_POSITION", "Position") +#define STR_PAGE_LAYOUT NC_("STR_PAGE_LAYOUT", "Layout") +#define STR_PAGE_OPTIONS NC_("STR_PAGE_OPTIONS", "Options") +#define STR_PAGE_SCALE NC_("STR_PAGE_SCALE", "Scale") +#define STR_PAGE_POSITIONING NC_("STR_PAGE_POSITIONING", "Positioning") +#define STR_PAGE_TRENDLINE_TYPE NC_("STR_PAGE_TRENDLINE_TYPE", "Type") +#define STR_PAGE_XERROR_BARS NC_("STR_PAGE_XERROR_BARS", "X Error Bars") +#define STR_PAGE_YERROR_BARS NC_("STR_PAGE_YERROR_BARS", "Y Error Bars") +#define STR_PAGE_ALIGNMENT NC_("STR_PAGE_ALIGNMENT", "Alignment") +#define STR_PAGE_PERSPECTIVE NC_("STR_PAGE_PERSPECTIVE", "Perspective") +#define STR_PAGE_APPEARANCE NC_("STR_PAGE_APPEARANCE", "Appearance") +#define STR_PAGE_ILLUMINATION NC_("STR_PAGE_ILLUMINATION", "Illumination") +#define STR_PAGE_ASIAN NC_("STR_PAGE_ASIAN", "Asian Typography") +#define STR_OBJECT_AVERAGE_LINE_WITH_PARAMETERS NC_("STR_OBJECT_AVERAGE_LINE_WITH_PARAMETERS", "Mean value line with value %AVERAGE_VALUE and standard deviation %STD_DEVIATION") +#define STR_OBJECT_AXIS NC_("STR_OBJECT_AXIS", "Axis") +#define STR_OBJECT_AXIS_X NC_("STR_OBJECT_AXIS_X", "X Axis") +#define STR_OBJECT_AXIS_Y NC_("STR_OBJECT_AXIS_Y", "Y Axis") +#define STR_OBJECT_AXIS_Z NC_("STR_OBJECT_AXIS_Z", "Z Axis") +#define STR_OBJECT_SECONDARY_X_AXIS NC_("STR_OBJECT_SECONDARY_X_AXIS", "Secondary X Axis") +#define STR_OBJECT_SECONDARY_Y_AXIS NC_("STR_OBJECT_SECONDARY_Y_AXIS", "Secondary Y Axis") +#define STR_OBJECT_AXES NC_("STR_OBJECT_AXES", "Axes") +#define STR_OBJECT_GRIDS NC_("STR_OBJECT_GRIDS", "Grids") +#define STR_OBJECT_GRID NC_("STR_OBJECT_GRID", "Grid") +#define STR_OBJECT_GRID_MAJOR_X NC_("STR_OBJECT_GRID_MAJOR_X", "X Axis Major Grid") +#define STR_OBJECT_GRID_MAJOR_Y NC_("STR_OBJECT_GRID_MAJOR_Y", "Y Axis Major Grid") +#define STR_OBJECT_GRID_MAJOR_Z NC_("STR_OBJECT_GRID_MAJOR_Z", "Z Axis Major Grid") +#define STR_OBJECT_GRID_MINOR_X NC_("STR_OBJECT_GRID_MINOR_X", "X Axis Minor Grid") +#define STR_OBJECT_GRID_MINOR_Y NC_("STR_OBJECT_GRID_MINOR_Y", "Y Axis Minor Grid") +#define STR_OBJECT_GRID_MINOR_Z NC_("STR_OBJECT_GRID_MINOR_Z", "Z Axis Minor Grid") +#define STR_OBJECT_LEGEND NC_("STR_OBJECT_LEGEND", "Legend") +#define STR_OBJECT_TITLE NC_("STR_OBJECT_TITLE", "Title") +#define STR_OBJECT_TITLES NC_("STR_OBJECT_TITLES", "Titles") +#define STR_OBJECT_TITLE_MAIN NC_("STR_OBJECT_TITLE_MAIN", "Main Title") +#define STR_OBJECT_TITLE_SUB NC_("STR_OBJECT_TITLE_SUB", "Subtitle") +#define STR_OBJECT_TITLE_X_AXIS NC_("STR_OBJECT_TITLE_X_AXIS", "X Axis Title") +#define STR_OBJECT_TITLE_Y_AXIS NC_("STR_OBJECT_TITLE_Y_AXIS", "Y Axis Title") +#define STR_OBJECT_TITLE_Z_AXIS NC_("STR_OBJECT_TITLE_Z_AXIS", "Z Axis Title") +#define STR_OBJECT_TITLE_SECONDARY_X_AXIS NC_("STR_OBJECT_TITLE_SECONDARY_X_AXIS", "Secondary X Axis Title") +#define STR_OBJECT_TITLE_SECONDARY_Y_AXIS NC_("STR_OBJECT_TITLE_SECONDARY_Y_AXIS", "Secondary Y Axis Title") +#define STR_OBJECT_LABEL NC_("STR_OBJECT_LABEL", "Label") +#define STR_OBJECT_DATALABELS NC_("STR_OBJECT_DATALABELS", "Data Labels") +#define STR_OBJECT_DATAPOINT NC_("STR_OBJECT_DATAPOINT", "Data Point") +#define STR_OBJECT_DATAPOINTS NC_("STR_OBJECT_DATAPOINTS", "Data Points") +#define STR_OBJECT_LEGEND_SYMBOL NC_("STR_OBJECT_LEGEND_SYMBOL", "Legend Key") +#define STR_OBJECT_DATASERIES NC_("STR_OBJECT_DATASERIES", "Data Series") +#define STR_OBJECT_DATASERIES_PLURAL NC_("STR_OBJECT_DATASERIES_PLURAL", "Data Series") +#define STR_OBJECT_CURVE NC_("STR_OBJECT_CURVE", "Trend Line") +#define STR_OBJECT_CURVES NC_("STR_OBJECT_CURVES", "Trend Lines") +#define STR_OBJECT_CURVE_WITH_PARAMETERS NC_("STR_OBJECT_CURVE_WITH_PARAMETERS", "Trend line %FORMULA with accuracy R² = %RSQUARED") +#define STR_OBJECT_MOVING_AVERAGE_WITH_PARAMETERS NC_("STR_OBJECT_MOVING_AVERAGE_WITH_PARAMETERS", "Moving average trend line with period = %PERIOD") +#define STR_OBJECT_AVERAGE_LINE NC_("STR_OBJECT_AVERAGE_LINE", "Mean Value Line") +#define STR_OBJECT_CURVE_EQUATION NC_("STR_OBJECT_CURVE_EQUATION", "Equation") +#define STR_OBJECT_ERROR_BARS_X NC_("STR_OBJECT_ERROR_BARS_X", "X Error Bars") +#define STR_OBJECT_ERROR_BARS_Y NC_("STR_OBJECT_ERROR_BARS_Y", "Y Error Bars") +#define STR_OBJECT_ERROR_BARS_Z NC_("STR_OBJECT_ERROR_BARS_Z", "Z Error Bars") +#define STR_OBJECT_STOCK_LOSS NC_("STR_OBJECT_STOCK_LOSS", "Stock Loss") +#define STR_OBJECT_STOCK_GAIN NC_("STR_OBJECT_STOCK_GAIN", "Stock Gain") +#define STR_OBJECT_PAGE NC_("STR_OBJECT_PAGE", "Chart Area") +#define STR_OBJECT_DIAGRAM NC_("STR_OBJECT_DIAGRAM", "Chart") +#define STR_OBJECT_DIAGRAM_WALL NC_("STR_OBJECT_DIAGRAM_WALL", "Chart Wall") +#define STR_OBJECT_DIAGRAM_FLOOR NC_("STR_OBJECT_DIAGRAM_FLOOR", "Chart Floor") +#define STR_OBJECT_SHAPE NC_("STR_OBJECT_SHAPE", "Drawing Object") +#define STR_TIP_DATASERIES NC_("STR_TIP_DATASERIES", "Data Series '%SERIESNAME'") +#define STR_TIP_DATAPOINT_INDEX NC_("STR_TIP_DATAPOINT_INDEX", "Data Point %POINTNUMBER") +#define STR_TIP_DATAPOINT_VALUES NC_("STR_TIP_DATAPOINT_VALUES", "Values: %POINTVALUES") +#define STR_TIP_DATAPOINT NC_("STR_TIP_DATAPOINT", "Data Point %POINTNUMBER, data series %SERIESNUMBER, values: %POINTVALUES") +#define STR_STATUS_DATAPOINT_MARKED NC_("STR_STATUS_DATAPOINT_MARKED", "Data point %POINTNUMBER in data series %SERIESNUMBER selected, values: %POINTVALUES") +#define STR_STATUS_OBJECT_MARKED NC_("STR_STATUS_OBJECT_MARKED", "%OBJECTNAME selected") +#define STR_STATUS_PIE_SEGMENT_EXPLODED NC_("STR_STATUS_PIE_SEGMENT_EXPLODED", "Pie exploded by %PERCENTVALUE percent") +#define STR_OBJECT_FOR_SERIES NC_("STR_OBJECT_FOR_SERIES", "%OBJECTNAME for Data Series '%SERIESNAME'") +#define STR_OBJECT_FOR_ALL_SERIES NC_("STR_OBJECT_FOR_ALL_SERIES", "%OBJECTNAME for all Data Series") +#define STR_ACTION_EDIT_CHARTTYPE NC_("STR_ACTION_EDIT_CHARTTYPE", "Edit chart type") +#define STR_ACTION_EDIT_DATA_RANGES NC_("STR_ACTION_EDIT_DATA_RANGES", "Edit data ranges") +#define STR_ACTION_EDIT_3D_VIEW NC_("STR_ACTION_EDIT_3D_VIEW", "Edit 3D view") +#define STR_ACTION_EDIT_CHART_DATA NC_("STR_ACTION_EDIT_CHART_DATA", "Edit chart data") +#define STR_ACTION_TOGGLE_LEGEND NC_("STR_ACTION_TOGGLE_LEGEND", "Legend on/off") +#define STR_ACTION_TOGGLE_GRID_HORZ NC_("STR_ACTION_TOGGLE_GRID_HORZ", "Horizontal grid major/major&minor/off") +#define STR_ACTION_TOGGLE_GRID_VERTICAL NC_("STR_ACTION_TOGGLE_GRID_VERTICAL", "Vertical grid major/major&minor/off") +#define STR_ACTION_SCALE_TEXT NC_("STR_ACTION_SCALE_TEXT", "Scale Text") +#define STR_ACTION_REARRANGE_CHART NC_("STR_ACTION_REARRANGE_CHART", "Automatic Layout") +#define STR_ACTION_NOTPOSSIBLE NC_("STR_ACTION_NOTPOSSIBLE", "This function cannot be completed with the selected objects.") +#define STR_ACTION_EDIT_TEXT NC_("STR_ACTION_EDIT_TEXT", "Edit text") +#define STR_COLUMN_LABEL NC_("STR_COLUMN_LABEL", "Column %COLUMNNUMBER") +#define STR_ROW_LABEL NC_("STR_ROW_LABEL", "Row %ROWNUMBER") +#define STR_DATA_ROLE_LABEL NC_("STR_DATA_ROLE_LABEL", "Name") +#define STR_DATA_ROLE_X NC_("STR_DATA_ROLE_X", "X-Values") +#define STR_DATA_ROLE_Y NC_("STR_DATA_ROLE_Y", "Y-Values") +#define STR_DATA_ROLE_SIZE NC_("STR_DATA_ROLE_SIZE", "Bubble Sizes") +#define STR_DATA_ROLE_X_ERROR NC_("STR_DATA_ROLE_X_ERROR", "X-Error-Bars") +#define STR_DATA_ROLE_X_ERROR_POSITIVE NC_("STR_DATA_ROLE_X_ERROR_POSITIVE", "Positive X-Error-Bars") +#define STR_DATA_ROLE_X_ERROR_NEGATIVE NC_("STR_DATA_ROLE_X_ERROR_NEGATIVE", "Negative X-Error-Bars") +#define STR_DATA_ROLE_Y_ERROR NC_("STR_DATA_ROLE_Y_ERROR", "Y-Error-Bars") +#define STR_DATA_ROLE_Y_ERROR_POSITIVE NC_("STR_DATA_ROLE_Y_ERROR_POSITIVE", "Positive Y-Error-Bars") +#define STR_DATA_ROLE_Y_ERROR_NEGATIVE NC_("STR_DATA_ROLE_Y_ERROR_NEGATIVE", "Negative Y-Error-Bars") +#define STR_DATA_ROLE_FIRST NC_("STR_DATA_ROLE_FIRST", "Open Values") +#define STR_DATA_ROLE_LAST NC_("STR_DATA_ROLE_LAST", "Close Values") +#define STR_DATA_ROLE_MIN NC_("STR_DATA_ROLE_MIN", "Low Values") +#define STR_DATA_ROLE_MAX NC_("STR_DATA_ROLE_MAX", "High Values") +#define STR_DATA_ROLE_CATEGORIES NC_("STR_DATA_ROLE_CATEGORIES", "Categories") +#define STR_DATA_UNNAMED_SERIES NC_("STR_DATA_UNNAMED_SERIES", "Series") +#define STR_DATA_UNNAMED_SERIES_WITH_INDEX NC_("STR_DATA_UNNAMED_SERIES_WITH_INDEX", "Series%NUMBER") +#define STR_DATA_SELECT_RANGE_FOR_SERIES NC_("STR_DATA_SELECT_RANGE_FOR_SERIES", "Select Range for %VALUETYPE of %SERIESNAME") +#define STR_DATA_SELECT_RANGE_FOR_CATEGORIES NC_("STR_DATA_SELECT_RANGE_FOR_CATEGORIES", "Select Range for Categories") +#define STR_DATA_SELECT_RANGE_FOR_DATALABELS NC_("STR_DATA_SELECT_RANGE_FOR_DATALABELS", "Select Range for data labels") +#define STR_DATA_EDITOR_INCORRECT_INPUT NC_("STR_DATA_EDITOR_INCORRECT_INPUT", "Your last input is incorrect.\nIgnore this change and close the dialog?") +#define STR_TEXT_DIRECTION_LTR NC_("STR_TEXT_DIRECTION_LTR", "Left-to-right") +#define STR_TEXT_DIRECTION_RTL NC_("STR_TEXT_DIRECTION_RTL", "Right-to-left") +#define STR_TEXT_DIRECTION_SUPER NC_("STR_TEXT_DIRECTION_SUPER", "Use superordinate object settings") +#define STR_PROPERTY_ROLE_FILLCOLOR NC_("STR_PROPERTY_ROLE_FILLCOLOR", "Fill Color") +#define STR_PROPERTY_ROLE_BORDERCOLOR NC_("STR_PROPERTY_ROLE_BORDERCOLOR", "Border Color") + +#define STR_CONTROLTEXT_ERROR_BARS_FROM_DATA NC_("STR_CONTROLTEXT_ERROR_BARS_FROM_DATA", "From Data Table") +#define STR_REGRESSION_LINEAR NC_("STR_REGRESSION_LINEAR", "Linear") +#define STR_REGRESSION_LOG NC_("STR_REGRESSION_LOG", "Logarithmic") +#define STR_REGRESSION_EXP NC_("STR_REGRESSION_EXP", "Exponential") +#define STR_REGRESSION_POWER NC_("STR_REGRESSION_POWER", "Power") +#define STR_REGRESSION_POLYNOMIAL NC_("STR_REGRESSION_POLYNOMIAL", "Polynomial") +#define STR_REGRESSION_MOVING_AVERAGE NC_("STR_REGRESSION_MOVING_AVERAGE", "Moving average") +#define STR_REGRESSION_MEAN NC_("STR_REGRESSION_MEAN", "Mean") + +#define STR_TYPE_COLUMN NC_("STR_TYPE_COLUMN", "Column") +#define STR_TYPE_BAR NC_("STR_TYPE_BAR", "Bar") +#define STR_TYPE_AREA NC_("STR_TYPE_AREA", "Area") +#define STR_TYPE_PIE NC_("STR_TYPE_PIE", "Pie") +#define STR_PIE_EXPLODED NC_("STR_PIE_EXPLODED", "Exploded Pie Chart") +#define STR_DONUT_EXPLODED NC_("STR_DONUT_EXPLODED", "Exploded Donut Chart") +#define STR_DONUT NC_("STR_DONUT", "Donut") +#define STR_TYPE_LINE NC_("STR_TYPE_LINE", "Line") +#define STR_TYPE_XY NC_("STR_TYPE_XY", "XY (Scatter)") +#define STR_POINTS_AND_LINES NC_("STR_POINTS_AND_LINES", "Points and Lines") +#define STR_POINTS_ONLY NC_("STR_POINTS_ONLY", "Points Only") +#define STR_LINES_ONLY NC_("STR_LINES_ONLY", "Lines Only") +#define STR_LINES_3D NC_("STR_LINES_3D", "3D Lines") +#define STR_TYPE_COMBI_COLUMN_LINE NC_("STR_TYPE_COMBI_COLUMN_LINE", "Column and Line") +#define STR_LINE_COLUMN NC_("STR_LINE_COLUMN", "Columns and Lines") +#define STR_LINE_STACKEDCOLUMN NC_("STR_LINE_STACKEDCOLUMN", "Stacked Columns and Lines") +#define STR_TYPE_NET NC_("STR_TYPE_NET", "Net") +#define STR_TYPE_STOCK NC_("STR_TYPE_STOCK", "Stock") +#define STR_STOCK_1 NC_("STR_STOCK_1", "Stock Chart 1") +#define STR_STOCK_2 NC_("STR_STOCK_2", "Stock Chart 2") +#define STR_STOCK_3 NC_("STR_STOCK_3", "Stock Chart 3") +#define STR_STOCK_4 NC_("STR_STOCK_4", "Stock Chart 4") +#define STR_NORMAL NC_("STR_NORMAL", "Normal") +#define STR_STACKED NC_("STR_STACKED", "Stacked") +#define STR_PERCENT NC_("STR_PERCENT", "Percent Stacked") +#define STR_DEEP NC_("STR_DEEP", "Deep") +#define STR_FILLED NC_("STR_FILLED", "Filled") +#define STR_TYPE_BUBBLE NC_("STR_TYPE_BUBBLE", "Bubble") +#define STR_BUBBLE_1 NC_("STR_BUBBLE_1", "Bubble Chart") + +#define STR_INVALID_NUMBER NC_("STR_INVALID_NUMBER", "Numbers are required. Check your input.") +#define STR_STEP_GT_ZERO NC_("STR_STEP_GT_ZERO", "The major interval requires a positive number. Check your input.") +#define STR_BAD_LOGARITHM NC_("STR_BAD_LOGARITHM", "The logarithmic scale requires positive numbers. Check your input.") +#define STR_MIN_GREATER_MAX NC_("STR_MIN_GREATER_MAX", "The minimum must be lower than the maximum. Check your input.") +#define STR_INVALID_INTERVALS NC_("STR_INVALID_INTERVALS", "The major interval needs to be greater than the minor interval. Check your input.") +#define STR_INVALID_TIME_UNIT NC_("STR_INVALID_TIME_UNIT", "The major and minor interval need to be greater or equal to the resolution. Check your input.") + +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |