diff options
Diffstat (limited to 'chart2/source/controller/dialogs/tp_Scale.cxx')
| -rw-r--r-- | chart2/source/controller/dialogs/tp_Scale.cxx | 637 |
1 files changed, 637 insertions, 0 deletions
diff --git a/chart2/source/controller/dialogs/tp_Scale.cxx b/chart2/source/controller/dialogs/tp_Scale.cxx new file mode 100644 index 000000000..7147dfa84 --- /dev/null +++ b/chart2/source/controller/dialogs/tp_Scale.cxx @@ -0,0 +1,637 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include "tp_Scale.hxx" + +#include <ResId.hxx> +#include <strings.hrc> +#include <chartview/ChartSfxItemIds.hxx> +#include <AxisHelper.hxx> + +#include <svx/svxids.hrc> +#include <osl/diagnose.h> +#include <sfx2/dialoghelper.hxx> +#include <svx/chrtitem.hxx> +#include <svl/eitem.hxx> +#include <svl/intitem.hxx> +#include <svl/numformat.hxx> +#include <vcl/formatter.hxx> +#include <vcl/weld.hxx> +#include <svl/zformat.hxx> +#include <vcl/svapp.hxx> + +#include <com/sun/star/chart2/AxisType.hpp> + +using namespace ::com::sun::star; + +namespace chart +{ + +namespace +{ + +void lcl_setValue(weld::FormattedSpinButton& rFmtField, double fValue) +{ + rFmtField.GetFormatter().SetValue(fValue); +} + +} + +ScaleTabPage::ScaleTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs) + : SfxTabPage(pPage, pController, "modules/schart/ui/tp_Scale.ui", "tp_Scale", &rInAttrs) + , fMin(0.0) + , fMax(0.0) + , fStepMain(0.0) + , nStepHelp(0) + , fOrigin(0.0) + , m_nTimeResolution(1) + , m_nMainTimeUnit(1) + , m_nHelpTimeUnit(1) + , m_nAxisType(chart2::AxisType::REALNUMBER) + , m_bAllowDateAxis(false) + , pNumFormatter(nullptr) + , m_bShowAxisOrigin(false) + , m_xCbxReverse(m_xBuilder->weld_check_button("CBX_REVERSE")) + , m_xCbxLogarithm(m_xBuilder->weld_check_button("CBX_LOGARITHM")) + , m_xBxType(m_xBuilder->weld_widget("boxTYPE")) + , m_xLB_AxisType(m_xBuilder->weld_combo_box("LB_AXIS_TYPE")) + , m_xBxMinMax(m_xBuilder->weld_widget("gridMINMAX")) + , m_xFmtFldMin(m_xBuilder->weld_formatted_spin_button("EDT_MIN")) + , m_xCbxAutoMin(m_xBuilder->weld_check_button("CBX_AUTO_MIN")) + , m_xFmtFldMax(m_xBuilder->weld_formatted_spin_button("EDT_MAX")) + , m_xCbxAutoMax(m_xBuilder->weld_check_button("CBX_AUTO_MAX")) + , m_xBxResolution(m_xBuilder->weld_widget("boxRESOLUTION")) + , m_xLB_TimeResolution(m_xBuilder->weld_combo_box("LB_TIME_RESOLUTION")) + , m_xCbx_AutoTimeResolution(m_xBuilder->weld_check_button("CBX_AUTO_TIME_RESOLUTION")) + , m_xTxtMain(m_xBuilder->weld_label("TXT_STEP_MAIN")) + , m_xFmtFldStepMain(m_xBuilder->weld_formatted_spin_button("EDT_STEP_MAIN")) + , m_xMt_MainDateStep(m_xBuilder->weld_spin_button("MT_MAIN_DATE_STEP")) + , m_xLB_MainTimeUnit(m_xBuilder->weld_combo_box("LB_MAIN_TIME_UNIT")) + , m_xCbxAutoStepMain(m_xBuilder->weld_check_button("CBX_AUTO_STEP_MAIN")) + , m_xTxtHelpCount(m_xBuilder->weld_label("TXT_STEP_HELP_COUNT")) + , m_xTxtHelp(m_xBuilder->weld_label("TXT_STEP_HELP")) + , m_xMtStepHelp(m_xBuilder->weld_spin_button("MT_STEPHELP")) + , m_xLB_HelpTimeUnit(m_xBuilder->weld_combo_box("LB_HELP_TIME_UNIT")) + , m_xCbxAutoStepHelp(m_xBuilder->weld_check_button("CBX_AUTO_STEP_HELP")) + , m_xFmtFldOrigin(m_xBuilder->weld_formatted_spin_button("EDT_ORIGIN")) + , m_xCbxAutoOrigin(m_xBuilder->weld_check_button("CBX_AUTO_ORIGIN")) + , m_xBxOrigin(m_xBuilder->weld_widget("boxORIGIN")) +{ + m_xCbxAutoMin->connect_toggled(LINK(this, ScaleTabPage, EnableValueHdl)); + m_xCbxAutoMax->connect_toggled(LINK(this, ScaleTabPage, EnableValueHdl)); + m_xCbxAutoStepMain->connect_toggled(LINK(this, ScaleTabPage, EnableValueHdl)); + m_xCbxAutoStepHelp->connect_toggled(LINK(this, ScaleTabPage, EnableValueHdl)); + m_xCbxAutoOrigin->connect_toggled(LINK(this, ScaleTabPage, EnableValueHdl)); + m_xCbx_AutoTimeResolution->connect_toggled(LINK(this, ScaleTabPage, EnableValueHdl)); + + Formatter& rFmtFldMax = m_xFmtFldMax->GetFormatter(); + rFmtFldMax.ClearMinValue(); + rFmtFldMax.ClearMaxValue(); + Formatter& rFmtFldMin = m_xFmtFldMin->GetFormatter(); + rFmtFldMin.ClearMinValue(); + rFmtFldMin.ClearMaxValue(); + Formatter& rFmtFldStepMain = m_xFmtFldStepMain->GetFormatter(); + rFmtFldStepMain.ClearMinValue(); + rFmtFldStepMain.ClearMaxValue(); + Formatter& rFmtFldOrigin = m_xFmtFldOrigin->GetFormatter(); + rFmtFldOrigin.ClearMinValue(); + rFmtFldOrigin.ClearMaxValue(); + + m_xLB_AxisType->connect_changed(LINK(this, ScaleTabPage, SelectAxisTypeHdl)); + + HideAllControls(); +} + +ScaleTabPage::~ScaleTabPage() +{ +} + +void ScaleTabPage::EnableControls() +{ + bool bValueAxis = m_nAxisType == chart2::AxisType::REALNUMBER + || m_nAxisType == chart2::AxisType::PERCENT + || m_nAxisType == chart2::AxisType::DATE; + bool bDateAxis = m_nAxisType == chart2::AxisType::DATE; + + m_xBxType->set_visible(m_bAllowDateAxis); + + m_xCbxLogarithm->set_visible( bValueAxis && !bDateAxis ); + + m_xBxMinMax->set_visible(bValueAxis); + + m_xTxtMain->set_visible( bValueAxis ); + m_xCbxAutoStepMain->set_visible( bValueAxis ); + + m_xTxtHelpCount->set_visible( bValueAxis && !bDateAxis ); + m_xTxtHelp->set_visible( bDateAxis ); + m_xMtStepHelp->set_visible( bValueAxis ); + m_xCbxAutoStepHelp->set_visible( bValueAxis ); + + m_xBxOrigin->set_visible( m_bShowAxisOrigin && bValueAxis ); + m_xBxResolution->set_visible( bDateAxis ); + + bool bWasDateAxis = m_xMt_MainDateStep->get_visible(); + if( bWasDateAxis != bDateAxis ) + { + //transport value from one to other control + if( bWasDateAxis ) + lcl_setValue( *m_xFmtFldStepMain, m_xMt_MainDateStep->get_value() ); + else + m_xMt_MainDateStep->set_value(m_xFmtFldStepMain->GetFormatter().GetValue()); + } + + m_xFmtFldStepMain->set_visible( bValueAxis && !bDateAxis ); + m_xMt_MainDateStep->set_visible( bDateAxis ); + + m_xLB_MainTimeUnit->set_visible( bDateAxis ); + m_xLB_HelpTimeUnit->set_visible( bDateAxis ); + + EnableValueHdl(*m_xCbxAutoMin); + EnableValueHdl(*m_xCbxAutoMax); + EnableValueHdl(*m_xCbxAutoStepMain); + EnableValueHdl(*m_xCbxAutoStepHelp); + EnableValueHdl(*m_xCbxAutoOrigin); + EnableValueHdl(*m_xCbx_AutoTimeResolution); +} + +IMPL_LINK( ScaleTabPage, EnableValueHdl, weld::Toggleable&, rCbx, void ) +{ + bool bEnable = !rCbx.get_active() && rCbx.get_sensitive(); + if (&rCbx == m_xCbxAutoMin.get()) + { + m_xFmtFldMin->set_sensitive( bEnable ); + } + else if (&rCbx == m_xCbxAutoMax.get()) + { + m_xFmtFldMax->set_sensitive( bEnable ); + } + else if (&rCbx == m_xCbxAutoStepMain.get()) + { + m_xFmtFldStepMain->set_sensitive( bEnable ); + m_xMt_MainDateStep->set_sensitive( bEnable ); + m_xLB_MainTimeUnit->set_sensitive( bEnable ); + } + else if (&rCbx == m_xCbxAutoStepHelp.get()) + { + m_xMtStepHelp->set_sensitive( bEnable ); + m_xLB_HelpTimeUnit->set_sensitive( bEnable ); + } + else if (&rCbx == m_xCbx_AutoTimeResolution.get()) + { + m_xLB_TimeResolution->set_sensitive( bEnable ); + } + else if (&rCbx == m_xCbxAutoOrigin.get()) + { + m_xFmtFldOrigin->set_sensitive( bEnable ); + } +} + +namespace { + +enum AxisTypeListBoxEntry +{ + TYPE_AUTO=0, + TYPE_TEXT=1, + TYPE_DATE=2 +}; + +} + +IMPL_LINK_NOARG(ScaleTabPage, SelectAxisTypeHdl, weld::ComboBox&, void) +{ + const sal_Int32 nPos = m_xLB_AxisType->get_active(); + if( nPos==TYPE_DATE ) + m_nAxisType = chart2::AxisType::DATE; + else + m_nAxisType = chart2::AxisType::CATEGORY; + if( m_nAxisType == chart2::AxisType::DATE ) + m_xCbxLogarithm->set_active(false); + EnableControls(); + SetNumFormat(); +} + +std::unique_ptr<SfxTabPage> ScaleTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs) +{ + return std::make_unique<ScaleTabPage>(pPage, pController, *rOutAttrs); +} + +bool ScaleTabPage::FillItemSet(SfxItemSet* rOutAttrs) +{ + OSL_PRECOND( pNumFormatter, "No NumberFormatter available" ); + + rOutAttrs->Put(SfxInt32Item(SCHATTR_AXISTYPE, m_nAxisType)); + if(m_bAllowDateAxis) + rOutAttrs->Put(SfxBoolItem(SCHATTR_AXIS_AUTO_DATEAXIS, m_xLB_AxisType->get_active()==TYPE_AUTO)); + + bool bAutoScale = false; + if( m_nAxisType==chart2::AxisType::CATEGORY ) + bAutoScale = true;//reset scaling for category charts + + rOutAttrs->Put(SfxBoolItem(SCHATTR_AXIS_AUTO_MIN ,bAutoScale || m_xCbxAutoMin->get_active())); + rOutAttrs->Put(SfxBoolItem(SCHATTR_AXIS_AUTO_MAX ,bAutoScale || m_xCbxAutoMax->get_active())); + rOutAttrs->Put(SfxBoolItem(SCHATTR_AXIS_AUTO_STEP_HELP,bAutoScale || m_xCbxAutoStepHelp->get_active())); + rOutAttrs->Put(SfxBoolItem(SCHATTR_AXIS_AUTO_ORIGIN ,bAutoScale || m_xCbxAutoOrigin->get_active())); + rOutAttrs->Put(SfxBoolItem(SCHATTR_AXIS_LOGARITHM ,m_xCbxLogarithm->get_active())); + rOutAttrs->Put(SfxBoolItem(SCHATTR_AXIS_REVERSE ,m_xCbxReverse->get_active())); + rOutAttrs->Put(SvxDoubleItem(fMax , SCHATTR_AXIS_MAX)); + rOutAttrs->Put(SvxDoubleItem(fMin , SCHATTR_AXIS_MIN)); + rOutAttrs->Put(SfxInt32Item(SCHATTR_AXIS_STEP_HELP, nStepHelp)); + rOutAttrs->Put(SvxDoubleItem(fOrigin , SCHATTR_AXIS_ORIGIN)); + + rOutAttrs->Put(SfxBoolItem(SCHATTR_AXIS_AUTO_STEP_MAIN,bAutoScale || m_xCbxAutoStepMain->get_active())); + rOutAttrs->Put(SvxDoubleItem(fStepMain,SCHATTR_AXIS_STEP_MAIN)); + + rOutAttrs->Put(SfxBoolItem(SCHATTR_AXIS_AUTO_TIME_RESOLUTION,bAutoScale || m_xCbx_AutoTimeResolution->get_active())); + rOutAttrs->Put(SfxInt32Item(SCHATTR_AXIS_TIME_RESOLUTION,m_nTimeResolution)); + + rOutAttrs->Put(SfxInt32Item(SCHATTR_AXIS_MAIN_TIME_UNIT,m_nMainTimeUnit)); + rOutAttrs->Put(SfxInt32Item(SCHATTR_AXIS_HELP_TIME_UNIT,m_nHelpTimeUnit)); + + return true; +} + +void ScaleTabPage::Reset(const SfxItemSet* rInAttrs) +{ + OSL_PRECOND( pNumFormatter, "No NumberFormatter available" ); + if(!pNumFormatter) + return; + + if (const SfxBoolItem* pDateAxisItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_ALLOW_DATEAXIS)) + m_bAllowDateAxis = pDateAxisItem->GetValue(); + m_nAxisType=chart2::AxisType::REALNUMBER; + if (const SfxInt32Item* pAxisTypeItem = rInAttrs->GetItemIfSet(SCHATTR_AXISTYPE)) + m_nAxisType = static_cast<int>(pAxisTypeItem->GetValue()); + if( m_nAxisType==chart2::AxisType::DATE && !m_bAllowDateAxis ) + m_nAxisType=chart2::AxisType::CATEGORY; + if( m_bAllowDateAxis ) + { + bool bAutoDateAxis = false; + if (const SfxBoolItem* pDateAxisItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_AUTO_DATEAXIS)) + bAutoDateAxis = pDateAxisItem->GetValue(); + + sal_uInt16 nPos = 0; + if( m_nAxisType==chart2::AxisType::DATE ) + nPos=TYPE_DATE; + else if( bAutoDateAxis ) + nPos=TYPE_AUTO; + else + nPos=TYPE_TEXT; + m_xLB_AxisType->set_active( nPos ); + } + + m_xCbxAutoMin->set_active(true); + m_xCbxAutoMax->set_active(true); + m_xCbxAutoStepMain->set_active(true); + m_xCbxAutoStepHelp->set_active(true); + m_xCbxAutoOrigin->set_active(true); + m_xCbx_AutoTimeResolution->set_active(true); + + if (const SfxBoolItem* pAutoMinItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_AUTO_MIN)) + m_xCbxAutoMin->set_active(pAutoMinItem->GetValue()); + + if (const SvxDoubleItem* pAxisMinItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_MIN)) + { + fMin = pAxisMinItem->GetValue(); + lcl_setValue( *m_xFmtFldMin, fMin ); + m_xFmtFldMin->save_value(); + } + + if (const SfxBoolItem* pAutoMaxItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_AUTO_MAX)) + m_xCbxAutoMax->set_active(pAutoMaxItem->GetValue()); + + if (const SvxDoubleItem* pAxisMaxItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_MAX)) + { + fMax = pAxisMaxItem->GetValue(); + lcl_setValue( *m_xFmtFldMax, fMax ); + m_xFmtFldMax->save_value(); + } + + if (const SfxBoolItem* pAutoStepMainItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_AUTO_STEP_MAIN)) + m_xCbxAutoStepMain->set_active(pAutoStepMainItem->GetValue()); + + if (const SvxDoubleItem* pStepMainItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_STEP_MAIN)) + { + fStepMain = pStepMainItem->GetValue(); + lcl_setValue( *m_xFmtFldStepMain, fStepMain ); + m_xFmtFldStepMain->save_value(); + m_xMt_MainDateStep->set_value( static_cast<sal_Int32>(fStepMain) ); + m_xMt_MainDateStep->save_value(); + } + if (const SfxBoolItem* pAutoStepHelpItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_AUTO_STEP_HELP)) + m_xCbxAutoStepHelp->set_active(pAutoStepHelpItem->GetValue()); + if (const SfxBoolItem* pLogItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_LOGARITHM)) + m_xCbxLogarithm->set_active(pLogItem->GetValue()); + if (const SfxBoolItem* pReverseItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_REVERSE)) + m_xCbxReverse->set_active(pReverseItem->GetValue()); + if (const SfxInt32Item* pStepHelpItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_STEP_HELP)) + { + nStepHelp = pStepHelpItem->GetValue(); + m_xMtStepHelp->set_value( nStepHelp ); + m_xMtStepHelp->save_value(); + } + if (const SfxBoolItem* pOriginItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_AUTO_ORIGIN)) + m_xCbxAutoOrigin->set_active(pOriginItem->GetValue()); + if (const SvxDoubleItem* pOriginItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_ORIGIN)) + { + fOrigin = pOriginItem->GetValue(); + lcl_setValue( *m_xFmtFldOrigin, fOrigin ); + m_xFmtFldOrigin->save_value(); + } + + if (const SfxBoolItem* pAutoTimeResItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_AUTO_TIME_RESOLUTION)) + m_xCbx_AutoTimeResolution->set_active(pAutoTimeResItem->GetValue()); + if (const SfxInt32Item* pTimeResItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_TIME_RESOLUTION)) + { + m_nTimeResolution = pTimeResItem->GetValue(); + m_xLB_TimeResolution->set_active( m_nTimeResolution ); + } + + if (const SfxInt32Item* pMainTimeUnitItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_MAIN_TIME_UNIT)) + { + m_nMainTimeUnit = pMainTimeUnitItem->GetValue(); + m_xLB_MainTimeUnit->set_active( m_nMainTimeUnit ); + } + if (const SfxInt32Item* pHelpTimeUnitItem = rInAttrs->GetItemIfSet(SCHATTR_AXIS_HELP_TIME_UNIT)) + { + m_nHelpTimeUnit = pHelpTimeUnitItem->GetValue(); + m_xLB_HelpTimeUnit->set_active( m_nHelpTimeUnit ); + } + + EnableControls(); + SetNumFormat(); +} + +DeactivateRC ScaleTabPage::DeactivatePage(SfxItemSet* pItemSet) +{ + if( !pNumFormatter ) + { + OSL_FAIL( "No NumberFormatter available" ); + return DeactivateRC::LeavePage; + } + + bool bDateAxis = m_nAxisType == chart2::AxisType::DATE; + + sal_uInt32 nMinMaxOriginFmt = m_xFmtFldMax->GetFormatter().GetFormatKey(); + if (pNumFormatter->GetType(nMinMaxOriginFmt) == SvNumFormatType::TEXT) + nMinMaxOriginFmt = 0; + // numberformat_text cause numbers to fail being numbers... Shouldn't happen, but can. + sal_uInt32 nStepFmt = m_xFmtFldStepMain->GetFormatter().GetFormatKey(); + if (pNumFormatter->GetType(nStepFmt) == SvNumFormatType::TEXT) + nStepFmt = 0; + + weld::Widget* pControl = nullptr; + TranslateId pErrStrId; + double fDummy; + + fMax = m_xFmtFldMax->GetFormatter().GetValue(); + fMin = m_xFmtFldMin->GetFormatter().GetValue(); + fOrigin = m_xFmtFldOrigin->GetFormatter().GetValue(); + fStepMain = bDateAxis ? m_xMt_MainDateStep->get_value() : m_xFmtFldStepMain->GetFormatter().GetValue(); + nStepHelp = m_xMtStepHelp->get_value(); + m_nTimeResolution = m_xLB_TimeResolution->get_active(); + m_nMainTimeUnit = m_xLB_MainTimeUnit->get_active(); + m_nHelpTimeUnit = m_xLB_HelpTimeUnit->get_active(); + + if( m_nAxisType != chart2::AxisType::REALNUMBER ) + m_xCbxLogarithm->hide(); + + //check which entries need user action + + if ( m_xCbxLogarithm->get_active() && + ( ( !m_xCbxAutoMin->get_active() && fMin <= 0.0 ) + || ( !m_xCbxAutoMax->get_active() && fMax <= 0.0 ) ) ) + { + pControl = m_xFmtFldMin.get(); + pErrStrId = STR_BAD_LOGARITHM; + } + // check for entries that cannot be parsed for the current number format + else if ( m_xFmtFldMin->get_value_changed_from_saved() + && !m_xCbxAutoMin->get_active() + && !pNumFormatter->IsNumberFormat( m_xFmtFldMin->get_text(), nMinMaxOriginFmt, fDummy)) + { + pControl = m_xFmtFldMin.get(); + pErrStrId = STR_INVALID_NUMBER; + } + else if ( m_xFmtFldMax->get_value_changed_from_saved() + && !m_xCbxAutoMax->get_active() + && !pNumFormatter->IsNumberFormat( m_xFmtFldMax->get_text(), nMinMaxOriginFmt, fDummy)) + { + pControl = m_xFmtFldMax.get(); + pErrStrId = STR_INVALID_NUMBER; + } + else if ( !bDateAxis && m_xFmtFldStepMain->get_value_changed_from_saved() + && !m_xCbxAutoStepMain->get_active() + && !pNumFormatter->IsNumberFormat( m_xFmtFldStepMain->get_text(), nStepFmt, fDummy)) + { + pControl = m_xFmtFldStepMain.get(); + pErrStrId = STR_INVALID_NUMBER; + } + else if (m_xFmtFldOrigin->get_value_changed_from_saved() && !m_xCbxAutoOrigin->get_active() && + !pNumFormatter->IsNumberFormat( m_xFmtFldOrigin->get_text(), nMinMaxOriginFmt, fDummy)) + { + pControl = m_xFmtFldOrigin.get(); + pErrStrId = STR_INVALID_NUMBER; + } + else if (!m_xCbxAutoStepMain->get_active() && fStepMain <= 0.0) + { + pControl = m_xFmtFldStepMain.get(); + pErrStrId = STR_STEP_GT_ZERO; + } + else if (!m_xCbxAutoMax->get_active() && !m_xCbxAutoMin->get_active() && + fMin >= fMax) + { + pControl = m_xFmtFldMin.get(); + pErrStrId = STR_MIN_GREATER_MAX; + } + else if( bDateAxis ) + { + if( !m_xCbxAutoStepMain->get_active() && !m_xCbxAutoStepHelp->get_active() ) + { + if( m_nHelpTimeUnit > m_nMainTimeUnit ) + { + pControl = m_xLB_MainTimeUnit.get(); + pErrStrId = STR_INVALID_INTERVALS; + } + else if( m_nHelpTimeUnit == m_nMainTimeUnit && nStepHelp > fStepMain ) + { + pControl = m_xLB_MainTimeUnit.get(); + pErrStrId = STR_INVALID_INTERVALS; + } + } + if( !pErrStrId && !m_xCbx_AutoTimeResolution->get_active() ) + { + if( (!m_xCbxAutoStepMain->get_active() && m_nTimeResolution > m_nMainTimeUnit ) + || + (!m_xCbxAutoStepHelp->get_active() && m_nTimeResolution > m_nHelpTimeUnit ) + ) + { + pControl = m_xLB_TimeResolution.get(); + pErrStrId = STR_INVALID_TIME_UNIT; + } + } + } + + if( ShowWarning( pErrStrId, pControl ) ) + return DeactivateRC::KeepPage; + + if( pItemSet ) + FillItemSet( pItemSet ); + + return DeactivateRC::LeavePage; +} + +void ScaleTabPage::SetNumFormatter( SvNumberFormatter* pFormatter ) +{ + pNumFormatter = pFormatter; + + Formatter& rFmtFldMax = m_xFmtFldMax->GetFormatter(); + Formatter& rFmtFldMin = m_xFmtFldMin->GetFormatter(); + Formatter& rFmtFldStepMain = m_xFmtFldStepMain->GetFormatter(); + Formatter& rFmtFldOrigin = m_xFmtFldOrigin->GetFormatter(); + + rFmtFldMax.SetFormatter( pNumFormatter ); + rFmtFldMin.SetFormatter( pNumFormatter ); + rFmtFldStepMain.SetFormatter( pNumFormatter ); + rFmtFldOrigin.SetFormatter( pNumFormatter ); + + // #i6278# allow more decimal places than the output format. As + // the numbers shown in the edit fields are used for input, it makes more + // sense to display the values in the input format rather than the output + // format. + rFmtFldMax.UseInputStringForFormatting(); + rFmtFldMin.UseInputStringForFormatting(); + rFmtFldStepMain.UseInputStringForFormatting(); + rFmtFldOrigin.UseInputStringForFormatting(); + + SetNumFormat(); +} + +void ScaleTabPage::SetNumFormat() +{ + const SfxUInt32Item *pNumFormatItem = GetItemSet().GetItemIfSet( SID_ATTR_NUMBERFORMAT_VALUE ); + + if( !pNumFormatItem ) + return; + + sal_uLong nFmt = pNumFormatItem->GetValue(); + + Formatter& rFmtFldMax = m_xFmtFldMax->GetFormatter(); + rFmtFldMax.SetFormatKey(nFmt); + Formatter& rFmtFldMin = m_xFmtFldMin->GetFormatter(); + rFmtFldMin.SetFormatKey(nFmt); + Formatter& rFmtFldOrigin = m_xFmtFldOrigin->GetFormatter(); + rFmtFldOrigin.SetFormatKey(nFmt); + + if( pNumFormatter ) + { + SvNumFormatType eType = pNumFormatter->GetType( nFmt ); + if( eType == SvNumFormatType::DATE ) + { + // for intervals use standard format for dates (so you can enter a number of days) + const SvNumberformat* pFormat = pNumFormatter->GetEntry( nFmt ); + if( pFormat ) + nFmt = pNumFormatter->GetStandardIndex( pFormat->GetLanguage()); + else + nFmt = pNumFormatter->GetStandardIndex(); + } + else if( eType == SvNumFormatType::DATETIME ) + { + // for intervals use time format for date times + const SvNumberformat* pFormat = pNumFormatter->GetEntry( nFmt ); + if( pFormat ) + nFmt = pNumFormatter->GetStandardFormat( SvNumFormatType::TIME, pFormat->GetLanguage() ); + else + nFmt = pNumFormatter->GetStandardFormat( SvNumFormatType::TIME ); + + // tdf#141625 give enough space to see full date+time + int nWidestTime(m_xFmtFldMin->get_pixel_size(getWidestDateTime(Application::GetSettings().GetLocaleDataWrapper(), true)).Width()); + int nWidthChars = std::ceil(nWidestTime / m_xFmtFldMin->get_approximate_digit_width()) + 1; + m_xFmtFldMin->set_width_chars(nWidthChars); + m_xFmtFldMax->set_width_chars(nWidthChars); + } + + if( m_nAxisType == chart2::AxisType::DATE && ( eType != SvNumFormatType::DATE && eType != SvNumFormatType::DATETIME) ) + { + const SvNumberformat* pFormat = pNumFormatter->GetEntry( nFmt ); + if( pFormat ) + nFmt = pNumFormatter->GetStandardFormat( SvNumFormatType::DATE, pFormat->GetLanguage() ); + else + nFmt = pNumFormatter->GetStandardFormat( SvNumFormatType::DATE ); + + rFmtFldMax.SetFormatKey(nFmt); + rFmtFldMin.SetFormatKey(nFmt); + rFmtFldOrigin.SetFormatKey(nFmt); + } + } + + m_xFmtFldStepMain->GetFormatter().SetFormatKey(nFmt); +} + +void ScaleTabPage::ShowAxisOrigin( bool bShowOrigin ) +{ + m_bShowAxisOrigin = bShowOrigin; + if( !AxisHelper::isAxisPositioningEnabled() ) + m_bShowAxisOrigin = true; +} + +bool ScaleTabPage::ShowWarning(TranslateId pResIdMessage, weld::Widget* pControl /* = nullptr */) +{ + if (!pResIdMessage) + return false; + + std::unique_ptr<weld::MessageDialog> xWarn(Application::CreateMessageDialog(GetFrameWeld(), + VclMessageType::Warning, VclButtonsType::Ok, + SchResId(pResIdMessage))); + xWarn->run(); + if (pControl) + { + pControl->grab_focus(); + weld::Entry* pEdit = dynamic_cast<weld::Entry*>(pControl); + if (pEdit) + pEdit->select_region(0, -1); + } + return true; +} + +void ScaleTabPage::HideAllControls() +{ + // We need to set these controls invisible when the class is instantiated + // since some code in EnableControls() depends on that logic. The real + // visibility of these controls depend on axis data type, and are + // set in EnableControls(). + + m_xBxType->hide(); + m_xCbxLogarithm->hide(); + m_xBxMinMax->hide(); + m_xTxtMain->hide(); + m_xFmtFldStepMain->hide(); + m_xMt_MainDateStep->hide(); + m_xLB_MainTimeUnit->hide(); + m_xCbxAutoStepMain->hide(); + m_xTxtHelpCount->hide(); + m_xTxtHelp->hide(); + m_xMtStepHelp->hide(); + m_xCbxAutoStepHelp->hide(); + m_xBxOrigin->hide(); + m_xBxResolution->hide(); +} + +} //namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |