diff options
Diffstat (limited to '')
| -rw-r--r-- | cui/source/tabpages/labdlg.cxx | 507 |
1 files changed, 507 insertions, 0 deletions
diff --git a/cui/source/tabpages/labdlg.cxx b/cui/source/tabpages/labdlg.cxx new file mode 100644 index 000000000..cb048426c --- /dev/null +++ b/cui/source/tabpages/labdlg.cxx @@ -0,0 +1,507 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <swpossizetabpage.hxx> +#include <svtools/unitconv.hxx> + +#include <svx/svddef.hxx> +#include <svx/sxcecitm.hxx> +#include <svx/sxcgitm.hxx> +#include <svx/sxcllitm.hxx> +#include <svx/sxctitm.hxx> + +#include <svx/dlgutil.hxx> +#include <labdlg.hxx> +#include <transfrm.hxx> +#include <bitmaps.hlst> + +// define ---------------------------------------------------------------- + +#define EXT_OPTIMAL 0 +#define EXT_FROM_TOP 1 +#define EXT_FROM_LEFT 2 +#define EXT_HORIZONTAL 3 +#define EXT_VERTICAL 4 + +#define POS_TOP 0 +#define POS_MIDDLE 1 +#define POS_BOTTOM 2 + +#define BMP_CAPTTYPE_1 1 +#define BMP_CAPTTYPE_2 2 +#define BMP_CAPTTYPE_3 3 + +// static ---------------------------------------------------------------- + +const WhichRangesContainer SvxCaptionTabPage::pCaptionRanges( + svl::Items< + SDRATTR_CAPTIONTYPE, SDRATTR_CAPTIONFIXEDANGLE, + SDRATTR_CAPTIONANGLE, SDRATTR_CAPTIONGAP, + SDRATTR_CAPTIONESCDIR, SDRATTR_CAPTIONESCISREL, + SDRATTR_CAPTIONESCREL, SDRATTR_CAPTIONESCABS, + SDRATTR_CAPTIONLINELEN, SDRATTR_CAPTIONFITLINELEN>); + +SvxCaptionTabPage::SvxCaptionTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs) + : SfxTabPage(pPage, pController, "cui/ui/calloutpage.ui", "CalloutPage", &rInAttrs) + , nCaptionType(SdrCaptionType::Type1) + , nGap(0) + , nEscDir(SdrCaptionEscDir::Horizontal) + , bEscRel(false) + , nEscAbs(0) + , nEscRel(0) + , nLineLen(0) + , bFitLineLen(false) + , nPosition(0) + , nExtension(0) + , rOutAttrs(rInAttrs) + , pView(nullptr) + , m_xMF_SPACING(m_xBuilder->weld_metric_spin_button("spacing", FieldUnit::MM)) + , m_xLB_EXTENSION(m_xBuilder->weld_combo_box("extension")) + , m_xFT_BYFT(m_xBuilder->weld_label("byft")) + , m_xMF_BY(m_xBuilder->weld_metric_spin_button("by", FieldUnit::MM)) + , m_xFT_POSITIONFT(m_xBuilder->weld_label("positionft")) + , m_xLB_POSITION(m_xBuilder->weld_combo_box("position")) + , m_xLineTypes(m_xBuilder->weld_combo_box("linetypes")) + , m_xFT_LENGTHFT(m_xBuilder->weld_label("lengthft")) + , m_xMF_LENGTH(m_xBuilder->weld_metric_spin_button("length", FieldUnit::MM)) + , m_xCB_OPTIMAL(m_xBuilder->weld_check_button("optimal")) + , m_xCT_CAPTTYPE(new ValueSet(m_xBuilder->weld_scrolled_window("valuesetwin", true))) + , m_xCT_CAPTTYPEWin(new weld::CustomWeld(*m_xBuilder, "valueset", *m_xCT_CAPTTYPE)) +{ + Size aSize(m_xCT_CAPTTYPE->GetDrawingArea()->get_ref_device().LogicToPixel(Size(187, 38), MapMode(MapUnit::MapAppFont))); + m_xCT_CAPTTYPEWin->set_size_request(aSize.Width(), aSize.Height()); + + assert(m_xLB_POSITION->get_count() == 6); + for (int i = 0; i < 3; ++i) + m_aStrHorzList.push_back(m_xLB_POSITION->get_text(i)); + for (int i = 3; i < 6; ++i) + m_aStrVertList.push_back(m_xLB_POSITION->get_text(i)); + m_xLB_POSITION->clear(); + + assert(m_xLineTypes->get_count() == 3); + std::vector<OUString> aLineTypes; + aLineTypes.reserve(3); + for (int i = 0; i < 3; ++i) + aLineTypes.push_back(m_xLineTypes->get_text(i)); + + static_assert(CAPTYPE_BITMAPS_COUNT == 3, "unexpected"); + m_aBmpCapTypes[0] = Image(StockImage::Yes, RID_SVXBMP_LEGTYP1); + m_aBmpCapTypes[1] = Image(StockImage::Yes, RID_SVXBMP_LEGTYP2); + m_aBmpCapTypes[2] = Image(StockImage::Yes, RID_SVXBMP_LEGTYP3); + + //------------install ValueSet-------------------------- + m_xCT_CAPTTYPE->SetStyle( m_xCT_CAPTTYPE->GetStyle() | WB_ITEMBORDER | WB_DOUBLEBORDER | WB_NAMEFIELD ); + m_xCT_CAPTTYPE->SetColCount(5);//XXX + m_xCT_CAPTTYPE->SetLineCount(1); + m_xCT_CAPTTYPE->SetSelectHdl(LINK( this, SvxCaptionTabPage, SelectCaptTypeHdl_Impl)); + + Image aImage; + m_xCT_CAPTTYPE->InsertItem(BMP_CAPTTYPE_1, aImage, aLineTypes[0]); + m_xCT_CAPTTYPE->InsertItem(BMP_CAPTTYPE_2, aImage, aLineTypes[1]); + m_xCT_CAPTTYPE->InsertItem(BMP_CAPTTYPE_3, aImage, aLineTypes[2]); + + FillValueSet(); + + m_xLB_EXTENSION->connect_changed(LINK(this, SvxCaptionTabPage, ExtensionSelectHdl_Impl)); + m_xLB_POSITION->connect_changed(LINK(this, SvxCaptionTabPage, PositionSelectHdl_Impl)); + m_xCB_OPTIMAL->connect_toggled(LINK(this, SvxCaptionTabPage, LineOptHdl_Impl)); +} + +SvxCaptionTabPage::~SvxCaptionTabPage() +{ + m_xCT_CAPTTYPEWin.reset(); + m_xCT_CAPTTYPE.reset(); +} + +void SvxCaptionTabPage::Construct() +{ + // set rectangle and working area + DBG_ASSERT( pView, "No valid View transferred!" ); +} + +bool SvxCaptionTabPage::FillItemSet( SfxItemSet* _rOutAttrs) +{ + SfxItemPool* pPool = _rOutAttrs->GetPool(); + DBG_ASSERT( pPool, "Where is the pool?" ); + + MapUnit eUnit; + + nCaptionType = static_cast<SdrCaptionType>(m_xCT_CAPTTYPE->GetSelectedItemId()-1); + + _rOutAttrs->Put( SdrCaptionTypeItem( nCaptionType ) ); + + if (m_xMF_SPACING->get_value_changed_from_saved()) + { + eUnit = pPool->GetMetric( GetWhich( SDRATTR_CAPTIONGAP ) ); + _rOutAttrs->Put( SdrCaptionGapItem( GetCoreValue(*m_xMF_SPACING, eUnit ) ) ); + } + + // special treatment!!! XXX + if( nCaptionType==SdrCaptionType::Type1 ) + { + switch( nEscDir ) + { + case SdrCaptionEscDir::Horizontal: nEscDir=SdrCaptionEscDir::Vertical;break; + case SdrCaptionEscDir::Vertical: nEscDir=SdrCaptionEscDir::Horizontal;break; + default: break; + } + } + + _rOutAttrs->Put( SdrCaptionEscDirItem( nEscDir ) ); + + bEscRel = m_xLB_POSITION->get_visible(); + _rOutAttrs->Put( SdrCaptionEscIsRelItem( bEscRel ) ); + + if( bEscRel ) + { + tools::Long nVal = 0; + + switch (m_xLB_POSITION->get_active()) + { + case POS_TOP: nVal=0;break; + case POS_MIDDLE: nVal=5000;break; + case POS_BOTTOM: nVal=10000;break; + } + _rOutAttrs->Put( SdrCaptionEscRelItem( nVal ) ); + } + else + { + if (m_xMF_BY->get_value_changed_from_saved()) + { + eUnit = pPool->GetMetric( GetWhich( SDRATTR_CAPTIONESCABS ) ); + _rOutAttrs->Put( SdrCaptionEscAbsItem( GetCoreValue(*m_xMF_BY, eUnit ) ) ); + } + } + + bFitLineLen = m_xCB_OPTIMAL->get_active(); + _rOutAttrs->Put( SdrCaptionFitLineLenItem( bFitLineLen ) ); + + if( ! bFitLineLen ) + { + if (m_xMF_LENGTH->get_value_changed_from_saved()) + { + eUnit = pPool->GetMetric( GetWhich( SDRATTR_CAPTIONLINELEN ) ); + _rOutAttrs->Put( SdrCaptionLineLenItem( GetCoreValue(*m_xMF_LENGTH, eUnit ) ) ); + } + } + +//NYI-------------the angles have to be added here!!! XXX---------------------- + + return true; +} + +void SvxCaptionTabPage::Reset( const SfxItemSet* ) +{ + + //------------set metric----------------------------- + + FieldUnit eFUnit = GetModuleFieldUnit( rOutAttrs ); + + switch ( eFUnit ) + { + case FieldUnit::CM: + case FieldUnit::M: + case FieldUnit::KM: + eFUnit = FieldUnit::MM; + break; + default: ;//prevent warning + } + SetFieldUnit( *m_xMF_SPACING, eFUnit ); + SetFieldUnit( *m_xMF_BY, eFUnit ); + SetFieldUnit( *m_xMF_LENGTH, eFUnit ); + + SfxItemPool* pPool = rOutAttrs.GetPool(); + DBG_ASSERT( pPool, "Where is the pool?" ); + + sal_uInt16 nWhich; + MapUnit eUnit; + + nWhich = GetWhich( SDRATTR_CAPTIONESCABS ); + eUnit = pPool->GetMetric( nWhich ); + nEscAbs = static_cast<const SdrCaptionEscAbsItem&>( rOutAttrs.Get( nWhich ) ).GetValue(); + SetMetricValue( *m_xMF_BY, nEscAbs, eUnit ); + nEscAbs = m_xMF_BY->get_value(FieldUnit::NONE); + + nWhich = GetWhich( SDRATTR_CAPTIONESCREL ); + nEscRel = static_cast<tools::Long>(static_cast<const SdrCaptionEscRelItem&>( rOutAttrs.Get( nWhich ) ).GetValue()); + + //------- line length ---------- + nWhich = GetWhich( SDRATTR_CAPTIONLINELEN ); + eUnit = pPool->GetMetric( nWhich ); + nLineLen = static_cast<const SdrCaptionLineLenItem&>( rOutAttrs.Get( nWhich ) ).GetValue(); + SetMetricValue( *m_xMF_LENGTH, nLineLen, eUnit ); + nLineLen = m_xMF_LENGTH->get_value(FieldUnit::NONE); + + //------- distance to box ---------- + nWhich = GetWhich( SDRATTR_CAPTIONGAP ); + eUnit = pPool->GetMetric( nWhich ); + nGap = static_cast<const SdrCaptionGapItem&>( rOutAttrs.Get( nWhich ) ).GetValue(); + SetMetricValue( *m_xMF_SPACING, nGap, eUnit ); + nGap = m_xMF_SPACING->get_value(FieldUnit::NONE); + + nCaptionType = rOutAttrs.Get( GetWhich( SDRATTR_CAPTIONTYPE ) ).GetValue(); + bFitLineLen = static_cast<const SfxBoolItem&>( rOutAttrs.Get( GetWhich( SDRATTR_CAPTIONFITLINELEN ) ) ).GetValue(); + nEscDir = rOutAttrs.Get( GetWhich( SDRATTR_CAPTIONESCDIR ) ).GetValue(); + bEscRel = static_cast<const SfxBoolItem&>( rOutAttrs.Get( GetWhich( SDRATTR_CAPTIONESCISREL ) ) ).GetValue(); + + // special treatment!!! XXX + if( nCaptionType==SdrCaptionType::Type1 ) + { + switch( nEscDir ) + { + case SdrCaptionEscDir::Horizontal: nEscDir=SdrCaptionEscDir::Vertical;break; + case SdrCaptionEscDir::Vertical: nEscDir=SdrCaptionEscDir::Horizontal;break; + default: break; + } + } + + nPosition = POS_MIDDLE; + nExtension = EXT_OPTIMAL; + + m_xMF_SPACING->set_value(nGap, FieldUnit::NONE); + + if( nEscDir == SdrCaptionEscDir::Horizontal ) + { + if( bEscRel ) + { + if( nEscRel < 3333 ) + nPosition = POS_TOP; + if( nEscRel > 6666 ) + nPosition = POS_BOTTOM; + nExtension = EXT_HORIZONTAL; + } + else + { + nExtension = EXT_FROM_TOP; + m_xMF_BY->set_value(nEscAbs, FieldUnit::NONE); + } + } + else if( nEscDir == SdrCaptionEscDir::Vertical ) + { + if( bEscRel ) + { + if( nEscRel < 3333 ) + nPosition = POS_TOP; + if( nEscRel > 6666 ) + nPosition = POS_BOTTOM; + nExtension = EXT_VERTICAL; + } + else + { + nExtension = EXT_FROM_LEFT; + m_xMF_BY->set_value(nEscAbs, FieldUnit::NONE); + } + } + else if( nEscDir == SdrCaptionEscDir::BestFit ) + { + nExtension = EXT_OPTIMAL; + } + + m_xCB_OPTIMAL->set_active(bFitLineLen); + m_xMF_LENGTH->set_value(nLineLen, FieldUnit::NONE); + + m_xLB_EXTENSION->set_active(nExtension); + + SetupExtension_Impl( nExtension ); + m_xCT_CAPTTYPE->SelectItem( static_cast<int>(nCaptionType)+1 ); // Enum starts at 0! + SetupType_Impl( nCaptionType ); +} + +std::unique_ptr<SfxTabPage> SvxCaptionTabPage::Create(weld::Container* pPage, weld::DialogController* pController, + const SfxItemSet* rOutAttrs) +{ + return std::make_unique<SvxCaptionTabPage>(pPage, pController, *rOutAttrs); +} + +void SvxCaptionTabPage::SetupExtension_Impl( sal_uInt16 nType ) +{ + switch( nType ) + { + case EXT_OPTIMAL: + m_xMF_BY->show(); + m_xFT_BYFT->show(); + m_xFT_POSITIONFT->hide(); + m_xLB_POSITION->hide(); + nEscDir = SdrCaptionEscDir::BestFit; + break; + + case EXT_FROM_TOP: + m_xMF_BY->show(); + m_xFT_BYFT->show(); + m_xFT_POSITIONFT->hide(); + m_xLB_POSITION->hide(); + nEscDir = SdrCaptionEscDir::Horizontal; + break; + + case EXT_FROM_LEFT: + m_xMF_BY->show(); + m_xFT_BYFT->show(); + m_xFT_POSITIONFT->hide(); + m_xLB_POSITION->hide(); + nEscDir = SdrCaptionEscDir::Vertical; + break; + + case EXT_HORIZONTAL: + m_xLB_POSITION->clear(); + for (const OUString & i : m_aStrHorzList) + m_xLB_POSITION->append_text(i); + m_xLB_POSITION->set_active(nPosition); + + m_xMF_BY->hide(); + m_xFT_BYFT->hide(); + m_xFT_POSITIONFT->show(); + m_xLB_POSITION->show(); + nEscDir = SdrCaptionEscDir::Horizontal; + break; + + case EXT_VERTICAL: + m_xLB_POSITION->clear(); + for (const OUString & i : m_aStrVertList) + m_xLB_POSITION->append_text(i); + m_xLB_POSITION->set_active(nPosition); + + m_xMF_BY->hide(); + m_xFT_BYFT->hide(); + m_xFT_POSITIONFT->show(); + m_xLB_POSITION->show(); + nEscDir = SdrCaptionEscDir::Vertical; + break; + } +} + +IMPL_LINK(SvxCaptionTabPage, ExtensionSelectHdl_Impl, weld::ComboBox&, rListBox, void) +{ + if (&rListBox == m_xLB_EXTENSION.get()) + { + SetupExtension_Impl(m_xLB_EXTENSION->get_active()); + } +} + +IMPL_LINK(SvxCaptionTabPage, PositionSelectHdl_Impl, weld::ComboBox&, rListBox, void) +{ + if (&rListBox == m_xLB_POSITION.get()) + { + nPosition = m_xLB_POSITION->get_active(); + } +} + +IMPL_LINK( SvxCaptionTabPage, LineOptHdl_Impl, weld::Toggleable&, rButton, void ) +{ + if (&rButton != m_xCB_OPTIMAL.get()) + return; + + if (m_xCB_OPTIMAL->get_active() || !m_xCB_OPTIMAL->get_sensitive()) + { + m_xFT_LENGTHFT->set_sensitive(false); + m_xMF_LENGTH->set_sensitive(false); + } + else + { + m_xFT_LENGTHFT->set_sensitive(true); + m_xMF_LENGTH->set_sensitive(true); + } +} + +IMPL_LINK_NOARG(SvxCaptionTabPage, SelectCaptTypeHdl_Impl, ValueSet*, void) +{ + SetupType_Impl( static_cast<SdrCaptionType>(m_xCT_CAPTTYPE->GetSelectedItemId()) ); +} + +void SvxCaptionTabPage::SetupType_Impl( SdrCaptionType nType ) +{ + switch( nType ) + { + case SdrCaptionType::Type1: + case SdrCaptionType::Type2: + m_xFT_LENGTHFT->set_sensitive(false); + m_xCB_OPTIMAL->set_sensitive(false); + LineOptHdl_Impl(*m_xCB_OPTIMAL); + break; + case SdrCaptionType::Type3: + case SdrCaptionType::Type4: + m_xFT_LENGTHFT->set_sensitive(true); + m_xCB_OPTIMAL->set_sensitive(true); + LineOptHdl_Impl(*m_xCB_OPTIMAL); + break; + } +} + +void SvxCaptionTabPage::FillValueSet() +{ + m_xCT_CAPTTYPE->SetItemImage(BMP_CAPTTYPE_1, m_aBmpCapTypes[0] ); + m_xCT_CAPTTYPE->SetItemImage(BMP_CAPTTYPE_2, m_aBmpCapTypes[1] ); + m_xCT_CAPTTYPE->SetItemImage(BMP_CAPTTYPE_3, m_aBmpCapTypes[2] ); +} + +SvxCaptionTabDialog::SvxCaptionTabDialog(weld::Window* pParent, const SdrView* pSdrView, + SvxAnchorIds nAnchorTypes) + : SfxTabDialogController(pParent, "cui/ui/calloutdialog.ui", "CalloutDialog") + , pView(pSdrView) + , nAnchorCtrls(nAnchorTypes) +{ + assert(pView); // No valid View transferred! + + //different positioning page in Writer + if (nAnchorCtrls & (SvxAnchorIds::Paragraph | SvxAnchorIds::Character | SvxAnchorIds::Page | SvxAnchorIds::Fly)) + { + AddTabPage("RID_SVXPAGE_SWPOSSIZE", SvxSwPosSizeTabPage::Create, + SvxSwPosSizeTabPage::GetRanges ); + RemoveTabPage("RID_SVXPAGE_POSITION_SIZE"); + } + else + { + AddTabPage("RID_SVXPAGE_POSITION_SIZE", SvxPositionSizeTabPage::Create, + SvxPositionSizeTabPage::GetRanges ); + RemoveTabPage("RID_SVXPAGE_SWPOSSIZE"); + } + AddTabPage("RID_SVXPAGE_CAPTION", SvxCaptionTabPage::Create, + SvxCaptionTabPage::GetRanges ); +} + +void SvxCaptionTabDialog::PageCreated(const OString& rId, SfxTabPage &rPage) +{ + if (rId == "RID_SVXPAGE_POSITION_SIZE") + { + static_cast<SvxPositionSizeTabPage&>( rPage ).SetView( pView ); + static_cast<SvxPositionSizeTabPage&>( rPage ).Construct(); + if( nAnchorCtrls & SvxAnchorIds::NoResize ) + static_cast<SvxPositionSizeTabPage&>( rPage ).DisableResize(); + + if( nAnchorCtrls & SvxAnchorIds::NoProtect ) + static_cast<SvxPositionSizeTabPage&>( rPage ).DisableProtect(); + } + else if (rId == "RID_SVXPAGE_SWPOSSIZE") + { + SvxSwPosSizeTabPage& rSwPage = static_cast<SvxSwPosSizeTabPage&>(rPage); + rSwPage.EnableAnchorTypes(nAnchorCtrls); + rSwPage.SetValidateFramePosLink( aValidateLink ); + } + else if (rId == "RID_SVXPAGE_CAPTION") + { + static_cast<SvxCaptionTabPage&>( rPage ).SetView( pView ); + static_cast<SvxCaptionTabPage&>( rPage ).Construct(); + } +} + +void SvxCaptionTabDialog::SetValidateFramePosLink( const Link<SvxSwFrameValidation&,void>& rLink ) +{ + aValidateLink = rLink; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |