diff options
Diffstat (limited to '')
| -rw-r--r-- | cui/source/tabpages/measure.cxx | 755 |
1 files changed, 755 insertions, 0 deletions
diff --git a/cui/source/tabpages/measure.cxx b/cui/source/tabpages/measure.cxx new file mode 100644 index 000000000..fe61ed53a --- /dev/null +++ b/cui/source/tabpages/measure.cxx @@ -0,0 +1,755 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <strings.hrc> +#include <dialmgr.hxx> + +#include <svx/svxids.hrc> +#include <svx/dlgutil.hxx> +#include <svx/measctrl.hxx> +#include <svx/ofaitem.hxx> +#include <svx/strarray.hxx> +#include <svx/svdview.hxx> +#include <svx/sxmbritm.hxx> +#include <svx/sxmlhitm.hxx> +#include <svx/sxmtfitm.hxx> +#include <svx/sxmtpitm.hxx> +#include <svx/sxmtritm.hxx> +#include <svx/sxmuitm.hxx> +#include <svtools/unitconv.hxx> + +#include <measure.hxx> + +const WhichRangesContainer SvxMeasurePage::pRanges( + svl::Items<SDRATTR_MEASURE_FIRST, SDRATTR_MEASURE_LAST>); + +/************************************************************************* +|* +|* Dialog to change measure-attributes +|* +\************************************************************************/ +SvxMeasureDialog::SvxMeasureDialog(weld::Window* pParent, const SfxItemSet& rInAttrs, + const SdrView* pSdrView) + : SfxSingleTabDialogController(pParent, &rInAttrs) +{ + auto xPage = std::make_unique<SvxMeasurePage>(get_content_area(), this, rInAttrs); + + xPage->SetView(pSdrView); + xPage->Construct(); + + SetTabPage(std::move(xPage)); + m_xDialog->set_title(CuiResId(RID_CUISTR_DIMENSION_LINE)); +} + +/************************************************************************* +|* +|* Tabpage for changing measure-attributes +|* +\************************************************************************/ + +SvxMeasurePage::SvxMeasurePage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs) + : SvxTabPage(pPage, pController, "cui/ui/dimensionlinestabpage.ui", "DimensionLinesTabPage", rInAttrs) + , rOutAttrs(rInAttrs) + , aAttrSet(*rInAttrs.GetPool()) + , pView(nullptr) + , eUnit(MapUnit::Map100thMM) + , bPositionModified(false) + , m_aCtlPosition(this) + , m_xMtrFldLineDist(m_xBuilder->weld_metric_spin_button("MTR_LINE_DIST", FieldUnit::MM)) + , m_xMtrFldHelplineOverhang(m_xBuilder->weld_metric_spin_button("MTR_FLD_HELPLINE_OVERHANG", FieldUnit::MM)) + , m_xMtrFldHelplineDist(m_xBuilder->weld_metric_spin_button("MTR_FLD_HELPLINE_DIST", FieldUnit::MM)) + , m_xMtrFldHelpline1Len(m_xBuilder->weld_metric_spin_button("MTR_FLD_HELPLINE1_LEN", FieldUnit::MM)) + , m_xMtrFldHelpline2Len(m_xBuilder->weld_metric_spin_button("MTR_FLD_HELPLINE2_LEN", FieldUnit::MM)) + , m_xTsbBelowRefEdge(m_xBuilder->weld_check_button("TSB_BELOW_REF_EDGE")) + , m_xMtrFldDecimalPlaces(m_xBuilder->weld_spin_button("MTR_FLD_DECIMALPLACES")) + , m_xTsbAutoPosV(m_xBuilder->weld_check_button("TSB_AUTOPOSV")) + , m_xTsbAutoPosH(m_xBuilder->weld_check_button("TSB_AUTOPOSH")) + , m_xTsbShowUnit(m_xBuilder->weld_check_button("TSB_SHOW_UNIT")) + , m_xLbUnit(m_xBuilder->weld_combo_box("LB_UNIT")) + , m_xTsbParallel(m_xBuilder->weld_check_button("TSB_PARALLEL")) + , m_xFtAutomatic(m_xBuilder->weld_label("STR_MEASURE_AUTOMATIC")) + , m_xCtlPosition(new weld::CustomWeld(*m_xBuilder, "CTL_POSITION", m_aCtlPosition)) + , m_xCtlPreview(new weld::CustomWeld(*m_xBuilder, "CTL_PREVIEW", m_aCtlPreview)) +{ + m_aCtlPreview.SetAttributes(rInAttrs); + + FillUnitLB(); + + const FieldUnit eFUnit = GetModuleFieldUnit( rInAttrs ); + SetFieldUnit( *m_xMtrFldLineDist, eFUnit ); + SetFieldUnit( *m_xMtrFldHelplineOverhang, eFUnit ); + SetFieldUnit( *m_xMtrFldHelplineDist, eFUnit ); + SetFieldUnit( *m_xMtrFldHelpline1Len, eFUnit ); + SetFieldUnit( *m_xMtrFldHelpline2Len, eFUnit ); + if( eFUnit == FieldUnit::MM ) + { + m_xMtrFldLineDist->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldHelplineOverhang->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldHelplineDist->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldHelpline1Len->set_increments(50, 500, FieldUnit::NONE); + m_xMtrFldHelpline2Len->set_increments(50, 500, FieldUnit::NONE); + } + + m_xTsbAutoPosV->connect_toggled(LINK( this, SvxMeasurePage, ClickAutoPosHdl_Impl)); + m_xTsbAutoPosH->connect_toggled(LINK(this, SvxMeasurePage, ClickAutoPosHdl_Impl)); + + Link<weld::MetricSpinButton&,void> aLink(LINK(this, SvxMeasurePage, ChangeAttrEditHdl_Impl)); + m_xMtrFldLineDist->set_range(-10000, 10000, FieldUnit::MM); + m_xMtrFldLineDist->connect_value_changed(aLink); + m_xMtrFldHelplineOverhang->connect_value_changed(aLink); + m_xMtrFldHelplineOverhang->set_range(-10000, 10000, FieldUnit::MM); + m_xMtrFldHelplineDist->connect_value_changed(aLink); + m_xMtrFldHelplineDist->set_range(-10000, 10000, FieldUnit::MM); + m_xMtrFldHelpline1Len->connect_value_changed(aLink); + m_xMtrFldHelpline1Len->set_range(-10000, 10000, FieldUnit::MM); + m_xMtrFldHelpline2Len->connect_value_changed(aLink); + m_xMtrFldHelpline2Len->set_range(-10000, 10000, FieldUnit::MM); + m_xMtrFldDecimalPlaces->connect_value_changed(LINK(this, SvxMeasurePage, ChangeAttrSpinHdl_Impl)); + m_xTsbBelowRefEdge->connect_toggled(LINK(this, SvxMeasurePage, ChangeAttrClickHdl_Impl)); + m_xTsbParallel->connect_toggled( LINK( this, SvxMeasurePage, ChangeAttrClickHdl_Impl)); + m_xTsbShowUnit->connect_toggled(LINK(this, SvxMeasurePage, ChangeAttrClickHdl_Impl)); + m_xLbUnit->connect_changed(LINK(this, SvxMeasurePage, ChangeAttrListBoxHdl_Impl)); +} + +SvxMeasurePage::~SvxMeasurePage() +{ + m_xCtlPreview.reset(); + m_xCtlPosition.reset(); +} + +/************************************************************************* +|* +|* read the delivered Item-Set +|* +\************************************************************************/ + +void SvxMeasurePage::Reset( const SfxItemSet* rAttrs ) +{ + SfxItemPool* pPool = rAttrs->GetPool(); + DBG_ASSERT( pPool, "Where is the pool?" ); + eUnit = pPool->GetMetric( SDRATTR_MEASURELINEDIST ); + + const SfxPoolItem* pItem = GetItem( *rAttrs, SDRATTR_MEASURELINEDIST ); + + // SdrMeasureLineDistItem + if( pItem == nullptr ) + pItem = &pPool->GetDefaultItem( SDRATTR_MEASURELINEDIST ); + SetMetricValue(*m_xMtrFldLineDist, static_cast<const SdrMetricItem*>(pItem)->GetValue(), eUnit); + m_xMtrFldLineDist->save_value(); + + // SdrMeasureHelplineOverhangItem + pItem = GetItem( *rAttrs, SDRATTR_MEASUREHELPLINEOVERHANG ); + if( pItem == nullptr ) + pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREHELPLINEOVERHANG ); + SetMetricValue(*m_xMtrFldHelplineOverhang, static_cast<const SdrMetricItem*>(pItem)->GetValue(), + eUnit); + m_xMtrFldHelplineOverhang->save_value(); + + // SdrMeasureHelplineDistItem + pItem = GetItem( *rAttrs, SDRATTR_MEASUREHELPLINEDIST ); + if( pItem == nullptr ) + pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREHELPLINEDIST ); + SetMetricValue(*m_xMtrFldHelplineDist, static_cast<const SdrMetricItem*>(pItem)->GetValue(), + eUnit); + m_xMtrFldHelplineDist->save_value(); + + // SdrMeasureHelpline1LenItem + pItem = GetItem( *rAttrs, SDRATTR_MEASUREHELPLINE1LEN ); + if( pItem == nullptr ) + pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREHELPLINE1LEN ); + SetMetricValue(*m_xMtrFldHelpline1Len, static_cast<const SdrMetricItem*>(pItem)->GetValue(), + eUnit); + m_xMtrFldHelpline1Len->save_value(); + + // SdrMeasureHelpline2LenItem + pItem = GetItem( *rAttrs, SDRATTR_MEASUREHELPLINE2LEN ); + if( pItem == nullptr ) + pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREHELPLINE2LEN ); + SetMetricValue(*m_xMtrFldHelpline2Len, static_cast<const SdrMetricItem*>(pItem)->GetValue(), + eUnit); + m_xMtrFldHelpline2Len->save_value(); + + // SdrMeasureBelowRefEdgeItem + if( rAttrs->GetItemState( SDRATTR_MEASUREBELOWREFEDGE ) != SfxItemState::DONTCARE ) + { + m_xTsbBelowRefEdge->set_state( rAttrs->Get( SDRATTR_MEASUREBELOWREFEDGE ). + GetValue() ? TRISTATE_TRUE : TRISTATE_FALSE ); + } + else + { + m_xTsbBelowRefEdge->set_state( TRISTATE_INDET ); + } + m_xTsbBelowRefEdge->save_state(); + + // SdrMeasureDecimalPlacesItem + pItem = GetItem( *rAttrs, SDRATTR_MEASUREDECIMALPLACES ); + if( pItem == nullptr ) + pItem = &pPool->GetDefaultItem( SDRATTR_MEASUREDECIMALPLACES ); + m_xMtrFldDecimalPlaces->set_value( + static_cast<const SdrMeasureDecimalPlacesItem*>(pItem)->GetValue()); + m_xMtrFldDecimalPlaces->save_value(); + + // SdrMeasureTextRota90Item + // Attention: negate ! + if( rAttrs->GetItemState( SDRATTR_MEASURETEXTROTA90 ) != SfxItemState::DONTCARE ) + { + m_xTsbParallel->set_state( rAttrs->Get( SDRATTR_MEASURETEXTROTA90 ). + GetValue() ? TRISTATE_FALSE : TRISTATE_TRUE ); + } + else + { + m_xTsbParallel->set_state( TRISTATE_INDET ); + } + m_xTsbParallel->save_state(); + + // SdrMeasureShowUnitItem + if( rAttrs->GetItemState( SDRATTR_MEASURESHOWUNIT ) != SfxItemState::DONTCARE ) + { + m_xTsbShowUnit->set_state( rAttrs->Get( SDRATTR_MEASURESHOWUNIT ). + GetValue() ? TRISTATE_TRUE : TRISTATE_FALSE ); + } + else + { + m_xTsbShowUnit->set_state( TRISTATE_INDET ); + } + m_xTsbShowUnit->save_state(); + + // SdrMeasureUnitItem + if( rAttrs->GetItemState( SDRATTR_MEASUREUNIT ) != SfxItemState::DONTCARE ) + { + tools::Long nFieldUnit = static_cast<tools::Long>(rAttrs->Get( SDRATTR_MEASUREUNIT ).GetValue()); + + for (sal_Int32 i = 0; i < m_xLbUnit->get_count(); ++i) + { + if (m_xLbUnit->get_id(i).toInt32() == nFieldUnit) + { + m_xLbUnit->set_active(i); + break; + } + } + } + else + { + m_xLbUnit->set_active(-1); + } + m_xLbUnit->save_value(); + + // Position + if ( rAttrs->GetItemState( SDRATTR_MEASURETEXTVPOS ) != SfxItemState::DONTCARE ) + { + css::drawing::MeasureTextVertPos eVPos = + rAttrs->Get( SDRATTR_MEASURETEXTVPOS ).GetValue(); + { + if ( rAttrs->GetItemState( SDRATTR_MEASURETEXTHPOS ) != SfxItemState::DONTCARE ) + { + css::drawing::MeasureTextHorzPos eHPos = + rAttrs->Get( SDRATTR_MEASURETEXTHPOS ).GetValue(); + RectPoint eRP = RectPoint::MM; + switch( eVPos ) + { + case css::drawing::MeasureTextVertPos_EAST: + switch( eHPos ) + { + case css::drawing::MeasureTextHorzPos_LEFTOUTSIDE: eRP = RectPoint::LT; break; + case css::drawing::MeasureTextHorzPos_INSIDE: eRP = RectPoint::MT; break; + case css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE: eRP = RectPoint::RT; break; + case css::drawing::MeasureTextHorzPos_AUTO: eRP = RectPoint::MT; break; + default: break; + } + break; + case css::drawing::MeasureTextVertPos_CENTERED: + switch( eHPos ) + { + case css::drawing::MeasureTextHorzPos_LEFTOUTSIDE: eRP = RectPoint::LM; break; + case css::drawing::MeasureTextHorzPos_INSIDE: eRP = RectPoint::MM; break; + case css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE: eRP = RectPoint::RM; break; + case css::drawing::MeasureTextHorzPos_AUTO: eRP = RectPoint::MM; break; + default: break; + } + break; + case css::drawing::MeasureTextVertPos_WEST: + switch( eHPos ) + { + case css::drawing::MeasureTextHorzPos_LEFTOUTSIDE: eRP = RectPoint::LB; break; + case css::drawing::MeasureTextHorzPos_INSIDE: eRP = RectPoint::MB; break; + case css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE: eRP = RectPoint::RB; break; + case css::drawing::MeasureTextHorzPos_AUTO: eRP = RectPoint::MB; break; + default: break; + } + break; + case css::drawing::MeasureTextVertPos_AUTO: + switch( eHPos ) + { + case css::drawing::MeasureTextHorzPos_LEFTOUTSIDE: eRP = RectPoint::LM; break; + case css::drawing::MeasureTextHorzPos_INSIDE: eRP = RectPoint::MM; break; + case css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE: eRP = RectPoint::RM; break; + case css::drawing::MeasureTextHorzPos_AUTO: eRP = RectPoint::MM; break; + default: break; + } + break; + default: ;//prevent warning + } + + CTL_STATE nState = CTL_STATE::NONE; + + if (eHPos == css::drawing::MeasureTextHorzPos_AUTO) + { + m_xTsbAutoPosH->set_state( TRISTATE_TRUE ); + nState = CTL_STATE::NOHORZ; + } + + if (eVPos == css::drawing::MeasureTextVertPos_AUTO) + { + m_xTsbAutoPosV->set_state( TRISTATE_TRUE ); + nState |= CTL_STATE::NOVERT; + } + + m_aCtlPosition.SetState(nState); + m_aCtlPosition.SetActualRP(eRP); + } + } + } + else + { + m_aCtlPosition.Reset(); + m_xTsbAutoPosV->set_state( TRISTATE_INDET ); + m_xTsbAutoPosH->set_state( TRISTATE_INDET ); + } + + // put the attributes to the preview-control, + // otherwise the control don't know about + // the settings of the dialog (#67930) + ChangeAttrHdl_Impl(m_xTsbShowUnit.get()); + m_aCtlPreview.SetAttributes(*rAttrs); + + bPositionModified = false; +} + +/************************************************************************* +|* +|* Fill the delivered Item-Set with dialogbox-attributes +|* +\************************************************************************/ + +bool SvxMeasurePage::FillItemSet( SfxItemSet* rAttrs) +{ + bool bModified = false; + sal_Int32 nValue; + TriState eState; + + if( m_xMtrFldLineDist->get_value_changed_from_saved() ) + { + nValue = GetCoreValue( *m_xMtrFldLineDist, eUnit ); + rAttrs->Put( makeSdrMeasureLineDistItem( nValue ) ); + bModified = true; + } + + if( m_xMtrFldHelplineOverhang->get_value_changed_from_saved() ) + { + nValue = GetCoreValue( *m_xMtrFldHelplineOverhang, eUnit ); + rAttrs->Put( makeSdrMeasureHelplineOverhangItem( nValue ) ); + bModified = true; + } + + if( m_xMtrFldHelplineDist->get_value_changed_from_saved() ) + { + nValue = GetCoreValue( *m_xMtrFldHelplineDist, eUnit ); + rAttrs->Put( makeSdrMeasureHelplineDistItem( nValue ) ); + bModified = true; + } + + if( m_xMtrFldHelpline1Len->get_value_changed_from_saved() ) + { + nValue = GetCoreValue( *m_xMtrFldHelpline1Len, eUnit ); + rAttrs->Put( makeSdrMeasureHelpline1LenItem( nValue ) ); + bModified = true; + } + + if( m_xMtrFldHelpline2Len->get_value_changed_from_saved() ) + { + nValue = GetCoreValue( *m_xMtrFldHelpline2Len, eUnit ); + rAttrs->Put( makeSdrMeasureHelpline2LenItem( nValue ) ); + bModified = true; + } + + eState = m_xTsbBelowRefEdge->get_state(); + if( m_xTsbBelowRefEdge->get_state_changed_from_saved() ) + { + rAttrs->Put( SdrMeasureBelowRefEdgeItem( TRISTATE_TRUE == eState ) ); + bModified = true; + } + + if( m_xMtrFldDecimalPlaces->get_value_changed_from_saved() ) + { + nValue = m_xMtrFldDecimalPlaces->get_value(); + rAttrs->Put( + SdrMeasureDecimalPlacesItem( + sal::static_int_cast< sal_Int16 >( nValue ) ) ); + bModified = true; + } + + eState = m_xTsbParallel->get_state(); + if( m_xTsbParallel->get_state_changed_from_saved() ) + { + rAttrs->Put( SdrMeasureTextRota90Item( TRISTATE_FALSE == eState ) ); + bModified = true; + } + + eState = m_xTsbShowUnit->get_state(); + if( m_xTsbShowUnit->get_state_changed_from_saved() ) + { + rAttrs->Put( SdrYesNoItem(SDRATTR_MEASURESHOWUNIT, TRISTATE_TRUE == eState ) ); + bModified = true; + } + + int nPos = m_xLbUnit->get_active(); + if( m_xLbUnit->get_value_changed_from_saved() ) + { + if (nPos != -1) + { + sal_uInt16 nFieldUnit = m_xLbUnit->get_id(nPos).toUInt32(); + FieldUnit _eUnit = static_cast<FieldUnit>(nFieldUnit); + rAttrs->Put( SdrMeasureUnitItem( _eUnit ) ); + bModified = true; + } + } + + if( bPositionModified ) + { + // Position + css::drawing::MeasureTextVertPos eVPos; + css::drawing::MeasureTextHorzPos eHPos; + + RectPoint eRP = m_aCtlPosition.GetActualRP(); + switch( eRP ) + { + default: + case RectPoint::LT: eVPos = css::drawing::MeasureTextVertPos_EAST; + eHPos = css::drawing::MeasureTextHorzPos_LEFTOUTSIDE; break; + case RectPoint::LM: eVPos = css::drawing::MeasureTextVertPos_CENTERED; + eHPos = css::drawing::MeasureTextHorzPos_LEFTOUTSIDE; break; + case RectPoint::LB: eVPos = css::drawing::MeasureTextVertPos_WEST; + eHPos = css::drawing::MeasureTextHorzPos_LEFTOUTSIDE; break; + case RectPoint::MT: eVPos = css::drawing::MeasureTextVertPos_EAST; + eHPos = css::drawing::MeasureTextHorzPos_INSIDE; break; + case RectPoint::MM: eVPos = css::drawing::MeasureTextVertPos_CENTERED; + eHPos = css::drawing::MeasureTextHorzPos_INSIDE; break; + case RectPoint::MB: eVPos = css::drawing::MeasureTextVertPos_WEST; + eHPos = css::drawing::MeasureTextHorzPos_INSIDE; break; + case RectPoint::RT: eVPos = css::drawing::MeasureTextVertPos_EAST; + eHPos = css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE; break; + case RectPoint::RM: eVPos = css::drawing::MeasureTextVertPos_CENTERED; + eHPos = css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE; break; + case RectPoint::RB: eVPos = css::drawing::MeasureTextVertPos_WEST; + eHPos = css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE; break; + } + if (m_xTsbAutoPosH->get_state() == TRISTATE_TRUE) + eHPos = css::drawing::MeasureTextHorzPos_AUTO; + + if (m_xTsbAutoPosV->get_state() == TRISTATE_TRUE) + eVPos = css::drawing::MeasureTextVertPos_AUTO; + + if ( rAttrs->GetItemState( SDRATTR_MEASURETEXTVPOS ) != SfxItemState::DONTCARE ) + { + css::drawing::MeasureTextVertPos eOldVPos = rOutAttrs.Get(SDRATTR_MEASURETEXTVPOS).GetValue(); + if( eOldVPos != eVPos ) + { + rAttrs->Put( SdrMeasureTextVPosItem( eVPos ) ); + bModified = true; + } + } + else + { + rAttrs->Put( SdrMeasureTextVPosItem( eVPos ) ); + bModified = true; + } + + if ( rAttrs->GetItemState( SDRATTR_MEASURETEXTHPOS ) != SfxItemState::DONTCARE ) + { + css::drawing::MeasureTextHorzPos eOldHPos = rOutAttrs.Get( SDRATTR_MEASURETEXTHPOS ).GetValue(); + if( eOldHPos != eHPos ) + { + rAttrs->Put( SdrMeasureTextHPosItem( eHPos ) ); + bModified = true; + } + } + else + { + rAttrs->Put( SdrMeasureTextHPosItem( eHPos ) ); + bModified = true; + } + } + + return bModified; +} + +/************************************************************************* +|* +|* The View have to set at the measure-object to be able to notify +|* unit and floatingpoint-values +|* +\************************************************************************/ + +void SvxMeasurePage::Construct() +{ + DBG_ASSERT( pView, "No valid View transferred!" ); + + // TTTT + // pMeasureObj is member of SvxXMeasurePreview and can only be accessed due to + // SvxMeasurePage being a friend. It has its own SdrModel (also in SvxXMeasurePreview) + // and 'setting' the SdrModel is a hack. The comment above about 'notify unit and + // floatingpoint-values' is not clear, but has to be done another way - if needed. + // Checked on original aw080, is just commented out there, too. + + m_aCtlPreview.Invalidate(); +} + +std::unique_ptr<SfxTabPage> SvxMeasurePage::Create(weld::Container* pPage, weld::DialogController* pController, + const SfxItemSet* rAttrs) +{ + return std::make_unique<SvxMeasurePage>(pPage, pController, *rAttrs); +} + +void SvxMeasurePage::PointChanged(weld::DrawingArea* pDrawingArea, RectPoint /*eRP*/) +{ + ChangeAttrHdl_Impl(pDrawingArea); +} + +IMPL_LINK( SvxMeasurePage, ClickAutoPosHdl_Impl, weld::Toggleable&, rBox, void ) +{ + if (m_xTsbAutoPosH->get_state() == TRISTATE_TRUE) + { + switch( m_aCtlPosition.GetActualRP() ) + { + case RectPoint::LT: + case RectPoint::RT: + m_aCtlPosition.SetActualRP( RectPoint::MT ); + break; + + case RectPoint::LM: + case RectPoint::RM: + m_aCtlPosition.SetActualRP( RectPoint::MM ); + break; + + case RectPoint::LB: + case RectPoint::RB: + m_aCtlPosition.SetActualRP( RectPoint::MB ); + break; + default: ;//prevent warning + } + } + if (m_xTsbAutoPosV->get_state() == TRISTATE_TRUE) + { + switch( m_aCtlPosition.GetActualRP() ) + { + case RectPoint::LT: + case RectPoint::LB: + m_aCtlPosition.SetActualRP( RectPoint::LM ); + break; + + case RectPoint::MT: + case RectPoint::MB: + m_aCtlPosition.SetActualRP( RectPoint::MM ); + break; + + case RectPoint::RT: + case RectPoint::RB: + m_aCtlPosition.SetActualRP( RectPoint::RM ); + break; + default: ;//prevent warning + } + } + ChangeAttrHdl_Impl(&rBox); +} + +IMPL_LINK(SvxMeasurePage, ChangeAttrClickHdl_Impl, weld::Toggleable&, r, void) +{ + ChangeAttrHdl_Impl(&r); +} + +IMPL_LINK(SvxMeasurePage, ChangeAttrListBoxHdl_Impl, weld::ComboBox&, rBox, void) +{ + ChangeAttrHdl_Impl(&rBox); +} + +IMPL_LINK(SvxMeasurePage, ChangeAttrEditHdl_Impl, weld::MetricSpinButton&, rBox, void) +{ + ChangeAttrHdl_Impl(&rBox); +} + +IMPL_LINK( SvxMeasurePage, ChangeAttrSpinHdl_Impl, weld::SpinButton&, rBox, void ) +{ + ChangeAttrHdl_Impl(&rBox); +} + +void SvxMeasurePage::ChangeAttrHdl_Impl( void const * p ) +{ + if (p == m_xMtrFldLineDist.get()) + { + sal_Int32 nValue = GetCoreValue( *m_xMtrFldLineDist, eUnit ); + aAttrSet.Put( makeSdrMeasureLineDistItem( nValue ) ); + } + + if (p == m_xMtrFldHelplineOverhang.get()) + { + sal_Int32 nValue = GetCoreValue( *m_xMtrFldHelplineOverhang, eUnit ); + aAttrSet.Put( makeSdrMeasureHelplineOverhangItem( nValue) ); + } + + if (p == m_xMtrFldHelplineDist.get()) + { + sal_Int32 nValue = GetCoreValue( *m_xMtrFldHelplineDist, eUnit ); + aAttrSet.Put( makeSdrMeasureHelplineDistItem( nValue) ); + } + + if (p == m_xMtrFldHelpline1Len.get()) + { + sal_Int32 nValue = GetCoreValue( *m_xMtrFldHelpline1Len, eUnit ); + aAttrSet.Put( makeSdrMeasureHelpline1LenItem( nValue ) ); + } + + if (p == m_xMtrFldHelpline2Len.get()) + { + sal_Int32 nValue = GetCoreValue( *m_xMtrFldHelpline2Len, eUnit ); + aAttrSet.Put( makeSdrMeasureHelpline2LenItem( nValue ) ); + } + + if (p == m_xTsbBelowRefEdge.get()) + { + TriState eState = m_xTsbBelowRefEdge->get_state(); + if( eState != TRISTATE_INDET ) + aAttrSet.Put( SdrMeasureBelowRefEdgeItem( TRISTATE_TRUE == eState ) ); + } + + if (p == m_xMtrFldDecimalPlaces.get()) + { + sal_Int16 nValue = sal::static_int_cast< sal_Int16 >( + m_xMtrFldDecimalPlaces->get_value() ); + aAttrSet.Put( SdrMeasureDecimalPlacesItem( nValue ) ); + } + + if (p == m_xTsbParallel.get()) + { + TriState eState = m_xTsbParallel->get_state(); + if( eState != TRISTATE_INDET ) + aAttrSet.Put( SdrMeasureTextRota90Item( TRISTATE_FALSE == eState ) ); + } + + if (p == m_xTsbShowUnit.get()) + { + TriState eState = m_xTsbShowUnit->get_state(); + if( eState != TRISTATE_INDET ) + aAttrSet.Put( SdrYesNoItem( SDRATTR_MEASURESHOWUNIT, TRISTATE_TRUE == eState ) ); + } + + if (p == m_xLbUnit.get()) + { + int nPos = m_xLbUnit->get_active(); + if (nPos != -1) + { + sal_uInt16 nFieldUnit = m_xLbUnit->get_id(nPos).toUInt32(); + FieldUnit _eUnit = static_cast<FieldUnit>(nFieldUnit); + aAttrSet.Put( SdrMeasureUnitItem( _eUnit ) ); + } + } + + if (p == m_xTsbAutoPosV.get() || p == m_xTsbAutoPosH.get() || p == m_aCtlPosition.GetDrawingArea()) + { + bPositionModified = true; + + // Position + RectPoint eRP = m_aCtlPosition.GetActualRP(); + css::drawing::MeasureTextVertPos eVPos; + css::drawing::MeasureTextHorzPos eHPos; + + switch( eRP ) + { + default: + case RectPoint::LT: eVPos = css::drawing::MeasureTextVertPos_EAST; + eHPos = css::drawing::MeasureTextHorzPos_LEFTOUTSIDE; break; + case RectPoint::LM: eVPos = css::drawing::MeasureTextVertPos_CENTERED; + eHPos = css::drawing::MeasureTextHorzPos_LEFTOUTSIDE; break; + case RectPoint::LB: eVPos = css::drawing::MeasureTextVertPos_WEST; + eHPos = css::drawing::MeasureTextHorzPos_LEFTOUTSIDE; break; + case RectPoint::MT: eVPos = css::drawing::MeasureTextVertPos_EAST; + eHPos = css::drawing::MeasureTextHorzPos_INSIDE; break; + case RectPoint::MM: eVPos = css::drawing::MeasureTextVertPos_CENTERED; + eHPos = css::drawing::MeasureTextHorzPos_INSIDE; break; + case RectPoint::MB: eVPos = css::drawing::MeasureTextVertPos_WEST; + eHPos = css::drawing::MeasureTextHorzPos_INSIDE; break; + case RectPoint::RT: eVPos = css::drawing::MeasureTextVertPos_EAST; + eHPos = css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE; break; + case RectPoint::RM: eVPos = css::drawing::MeasureTextVertPos_CENTERED; + eHPos = css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE; break; + case RectPoint::RB: eVPos = css::drawing::MeasureTextVertPos_WEST; + eHPos = css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE; break; + } + + CTL_STATE nState = CTL_STATE::NONE; + + if (m_xTsbAutoPosH->get_state() == TRISTATE_TRUE) + { + eHPos = css::drawing::MeasureTextHorzPos_AUTO; + nState = CTL_STATE::NOHORZ; + } + + if (m_xTsbAutoPosV->get_state() == TRISTATE_TRUE) + { + eVPos = css::drawing::MeasureTextVertPos_AUTO; + nState |= CTL_STATE::NOVERT; + } + + if (p == m_xTsbAutoPosV.get() || p == m_xTsbAutoPosH.get()) + m_aCtlPosition.SetState( nState ); + + aAttrSet.Put( SdrMeasureTextVPosItem( eVPos ) ); + aAttrSet.Put( SdrMeasureTextHPosItem( eHPos ) ); + } + + m_aCtlPreview.SetAttributes(aAttrSet); + m_aCtlPreview.Invalidate(); +} + +void SvxMeasurePage::FillUnitLB() +{ + // fill ListBox with metrics + + FieldUnit nUnit = FieldUnit::NONE; + OUString aStrMetric(m_xFtAutomatic->get_label()); + m_xLbUnit->append(OUString::number(sal_uInt32(nUnit)), aStrMetric); + + for( sal_uInt32 i = 0; i < SvxFieldUnitTable::Count(); ++i ) + { + aStrMetric = SvxFieldUnitTable::GetString(i); + nUnit = SvxFieldUnitTable::GetValue(i); + m_xLbUnit->append(OUString::number(sal_uInt32(nUnit)), aStrMetric); + } +} + +void SvxMeasurePage::PageCreated(const SfxAllItemSet& aSet) +{ + const OfaPtrItem* pOfaPtrItem = aSet.GetItem<OfaPtrItem>(SID_OBJECT_LIST, false); + + if (pOfaPtrItem) + SetView( static_cast<SdrView *>(pOfaPtrItem->GetValue())); + + Construct(); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |