diff options
Diffstat (limited to '')
| -rw-r--r-- | include/rtl/byteseq.h | 331 | ||||
| -rw-r--r-- | include/rtl/byteseq.hxx | 144 |
2 files changed, 475 insertions, 0 deletions
diff --git a/include/rtl/byteseq.h b/include/rtl/byteseq.h new file mode 100644 index 000000000..2acb9b745 --- /dev/null +++ b/include/rtl/byteseq.h @@ -0,0 +1,331 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +/* + * This file is part of LibreOffice published API. + */ +#ifndef INCLUDED_RTL_BYTESEQ_H +#define INCLUDED_RTL_BYTESEQ_H + +#include "sal/config.h" + +#include "rtl/alloc.h" +#include "sal/saldllapi.h" +#include "sal/types.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + +/** Assures that the reference count of the given byte sequence is one. Otherwise a new copy + of the sequence is created with a reference count of one. + + @param ppSequence sequence +*/ +SAL_DLLPUBLIC void SAL_CALL rtl_byte_sequence_reference2One( + sal_Sequence ** ppSequence ) + SAL_THROW_EXTERN_C(); + +/** Reallocates length of byte sequence. + + @param ppSequence sequence + @param nSize new size of sequence +*/ +SAL_DLLPUBLIC void SAL_CALL rtl_byte_sequence_realloc( + sal_Sequence ** ppSequence, sal_Int32 nSize ) + SAL_THROW_EXTERN_C(); + +/** Acquires the byte sequence + + @param pSequence sequence, that is to be acquired +*/ +SAL_DLLPUBLIC void SAL_CALL rtl_byte_sequence_acquire( + sal_Sequence *pSequence ) + SAL_THROW_EXTERN_C(); + +/** Releases the byte sequence. If the refcount drops to zero, the sequence is freed. + + @param pSequence sequence, that is to be released; invalid after call +*/ +SAL_DLLPUBLIC void SAL_CALL rtl_byte_sequence_release( + sal_Sequence *pSequence ) + SAL_THROW_EXTERN_C(); + +/** Constructs a bytes sequence with length nLength. All bytes are set to zero. + + @param ppSequence inout sequence; on entry *ppSequence may be null, otherwise it is released; + after the call, *ppSequence contains the newly constructed sequence + @param nLength length of new sequence +*/ +SAL_DLLPUBLIC void SAL_CALL rtl_byte_sequence_construct( + sal_Sequence **ppSequence , sal_Int32 nLength ) + SAL_THROW_EXTERN_C(); + +/** Constructs a bytes sequence with length nLength. The data is not initialized. + + @param ppSequence inout sequence; on entry *ppSequence may be null, otherwise it is released; + after the call, *ppSequence contains the newly constructed sequence + @param nLength length of new sequence +*/ +SAL_DLLPUBLIC void SAL_CALL rtl_byte_sequence_constructNoDefault( + sal_Sequence **ppSequence , sal_Int32 nLength ) + SAL_THROW_EXTERN_C(); + +/** Constructs a byte sequence with length nLength and copies nLength bytes from pData. + + @param ppSequence inout sequence; on entry *ppSequence may be null, otherwise it is released; + after the call, *ppSequence contains the newly constructed sequence + @param pData initial data + @param nLength length of new sequence +*/ +SAL_DLLPUBLIC void SAL_CALL rtl_byte_sequence_constructFromArray( + sal_Sequence **ppSequence, const sal_Int8 *pData , sal_Int32 nLength ) + SAL_THROW_EXTERN_C(); + +/** Assigns the byte sequence pSequence to *ppSequence. + + @param ppSequence inout sequence; on entry *ppSequence may be null, otherwise it is released; + after the call, *ppSequence references pSequence + @param pSequence the source sequence +*/ +SAL_DLLPUBLIC void SAL_CALL rtl_byte_sequence_assign( + sal_Sequence **ppSequence , sal_Sequence *pSequence ) + SAL_THROW_EXTERN_C(); + +/** Compares two byte sequences. + + @return true, if the data within the sequences are identical; false otherwise +*/ +SAL_DLLPUBLIC sal_Bool SAL_CALL rtl_byte_sequence_equals( + sal_Sequence *pSequence1 , sal_Sequence *pSequence2 ) + SAL_THROW_EXTERN_C(); + +/** Returns the data array pointer of the sequence. + + @return read-pointer to the data array of the sequence. If rtl_byte_sequence_reference2One() + has been called before, the pointer may be casted to a non const pointer and + the sequence may be modified +*/ +SAL_DLLPUBLIC const sal_Int8 *SAL_CALL rtl_byte_sequence_getConstArray( + sal_Sequence *pSequence ) + SAL_THROW_EXTERN_C(); + +/** Returns the length of the sequence + + @param pSequence sequence handle + @return length of the sequence +*/ +SAL_DLLPUBLIC sal_Int32 SAL_CALL rtl_byte_sequence_getLength( + sal_Sequence *pSequence ) + SAL_THROW_EXTERN_C(); + +#ifdef __cplusplus +} +namespace rtl +{ + +enum __ByteSequence_NoDefault +{ + /** This enum value can be used to create a bytesequence with uninitialized data + */ + BYTESEQ_NODEFAULT = 0xcafe +}; + +enum __ByteSequence_NoAcquire +{ + /** This enum value can be used to create a bytesequence from a C-Handle without + acquiring the handle. + */ + BYTESEQ_NOACQUIRE = +#if defined _MSC_VER + int(0xcafebabe) +#else + 0xcafebabe +#endif +}; + +/** C++ class representing a SAL byte sequence. + C++ Sequences are reference counted and shared, so the sequence keeps a handle to its data. + To keep value semantics, copies are only generated if the sequence is to be modified + (new handle). +*/ +class SAL_WARN_UNUSED ByteSequence +{ + /** sequence handle + */ + sal_Sequence * _pSequence; + +public: + /// @cond INTERNAL + // these are here to force memory de/allocation to sal lib. + static void * SAL_CALL operator new ( size_t nSize ) + { return ::rtl_allocateMemory( nSize ); } + static void SAL_CALL operator delete ( void * pMem ) + { ::rtl_freeMemory( pMem ); } + static void * SAL_CALL operator new ( size_t, void * pMem ) + { return pMem; } + static void SAL_CALL operator delete ( void *, void * ) + {} + /// @endcond + + /** Default constructor: Creates an empty sequence. + */ + inline ByteSequence(); + /** Copy constructor: Creates a copy of given sequence. + + @param rSeq another byte sequence + */ + inline ByteSequence( const ByteSequence & rSeq ); +#if defined LIBO_INTERNAL_ONLY + inline ByteSequence( ByteSequence && rSeq ) noexcept; +#endif + /** Copy constructor Creates a copy from the C-Handle. + + @param pSequence another byte sequence handle + */ + inline ByteSequence( sal_Sequence *pSequence ); + /** Constructor: Creates a copy of given data bytes. + + @param pElements an array of bytes + @param len number of bytes + */ + inline ByteSequence( const sal_Int8 * pElements, sal_Int32 len ); + /** Constructor: Creates sequence of given length and initializes all bytes to 0. + + @param len initial sequence length + */ + inline ByteSequence( sal_Int32 len ); + /** Constructor: Creates sequence of given length and does NOT initialize data. + Use this ctor for performance optimization only. + + @param len initial sequence length + @param nodefault dummy parameter forcing explicit BYTESEQ_NODEFAULT + */ + inline ByteSequence( sal_Int32 len , enum __ByteSequence_NoDefault nodefault ); + /** Constructor: + Creates a sequence from a C-Handle without acquiring the handle, thus taking + over ownership. Eitherway the handle is released by the destructor. + This ctor is useful, when working with a c-interface (it safes a pair of + acquire and release call and is thus a performance optimization only). + + @param pSequence sequence handle to be taken over + @param noacquire dummy parameter forcing explicit BYTESEQ_NOACQUIRE + */ + inline ByteSequence( sal_Sequence *pSequence , enum __ByteSequence_NoAcquire noacquire ); + /** Destructor: Releases sequence handle. Last handle will free memory. + */ + inline ~ByteSequence(); + + /** Assignment operator: Acquires given sequence handle and releases a previously set handle. + + @param rSeq another byte sequence + @return this sequence + */ + inline ByteSequence & SAL_CALL operator = ( const ByteSequence & rSeq ); +#if defined LIBO_INTERNAL_ONLY + inline ByteSequence & operator = ( ByteSequence && rSeq ) noexcept; +#endif + + /** Gets the length of sequence. + + @return length of sequence + */ + sal_Int32 SAL_CALL getLength() const + { return _pSequence->nElements; } + + /** Gets a pointer to byte array for READING. If the sequence has a length of 0, then the + returned pointer is undefined. + + @return pointer to byte array + */ + const sal_Int8 * SAL_CALL getConstArray() const + { return reinterpret_cast<sal_Int8 *>(_pSequence->elements); } + /** Gets a pointer to elements array for READING AND WRITING. In general if the sequence + has a handle acquired by other sequences (reference count > 1), then a new sequence is + created copying all bytes to keep value semantics! + If the sequence has a length of 0, then the returned pointer is undefined. + + @return pointer to elements array + */ + inline sal_Int8 * SAL_CALL getArray(); + + /** Non-const index operator: + Obtains a reference to byte indexed at given position. + In general if the sequence has a handle acquired by other + sequences (reference count > 1), then a new sequence is created + copying all bytes to keep value semantics! + + @attention + The implementation does NOT check for array bounds! + + @param nIndex index + @return non-const C++ reference to element at index nIndex + */ + inline sal_Int8 & SAL_CALL operator [] ( sal_Int32 nIndex ); + + /** Const index operator: Obtains a reference to byte indexed at given position. + The implementation does NOT check for array bounds! + + @param nIndex index + @return const C++ reference to byte at element of index nIndex + */ + const sal_Int8 & SAL_CALL operator [] ( sal_Int32 nIndex ) const + { return getConstArray()[ nIndex ]; } + + /** Equality operator: Compares two sequences. + + @param rSeq another byte sequence (right side) + @return true if both sequences are equal, false otherwise + */ + inline bool SAL_CALL operator == ( const ByteSequence & rSeq ) const; + /** Unequality operator: Compares two sequences. + + @param rSeq another byte sequence (right side) + @return false if both sequences are equal, true otherwise + */ + inline bool SAL_CALL operator != ( const ByteSequence & rSeq ) const; + + /** Reallocates sequence to new length. If the sequence has a handle acquired by other sequences + (reference count > 1), then the remaining elements are copied to a new sequence handle to + keep value semantics! + + @param nSize new size of sequence + */ + inline void SAL_CALL realloc( sal_Int32 nSize ); + + /** Returns the UNacquired C handle of the sequence + + @return UNacquired handle of the sequence + */ + sal_Sequence * SAL_CALL getHandle() const + { return _pSequence; } + /** Returns the UNacquired C handle of the sequence (for compatibility reasons) + + @return UNacquired handle of the sequence + */ + sal_Sequence * SAL_CALL get() const + { return _pSequence; } +}; + +} +#endif +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ diff --git a/include/rtl/byteseq.hxx b/include/rtl/byteseq.hxx new file mode 100644 index 000000000..33118cd8b --- /dev/null +++ b/include/rtl/byteseq.hxx @@ -0,0 +1,144 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +/* + * This file is part of LibreOffice published API. + */ +#ifndef INCLUDED_RTL_BYTESEQ_HXX +#define INCLUDED_RTL_BYTESEQ_HXX + +#include "rtl/byteseq.h" + +#include <cstddef> +#include <new> + +namespace rtl +{ + + +inline ByteSequence::ByteSequence() + : _pSequence( NULL ) +{ + ::rtl_byte_sequence_construct( &_pSequence, 0 ); +} + +inline ByteSequence::ByteSequence( const ByteSequence & rSeq ) + : _pSequence( NULL ) +{ + ::rtl_byte_sequence_assign( &_pSequence, rSeq._pSequence ); +} + +#if defined LIBO_INTERNAL_ONLY +inline ByteSequence::ByteSequence( ByteSequence && rSeq ) noexcept + : _pSequence(rSeq._pSequence) +{ + rSeq._pSequence = nullptr; +} +#endif + +inline ByteSequence::ByteSequence( sal_Sequence *pSequence) + : _pSequence( pSequence ) +{ + ::rtl_byte_sequence_acquire( pSequence ); +} + +inline ByteSequence::ByteSequence( const sal_Int8 * pElements, sal_Int32 len ) + : _pSequence( NULL ) +{ + ::rtl_byte_sequence_constructFromArray( &_pSequence, pElements, len ); + if (_pSequence == NULL) + throw ::std::bad_alloc(); +} + +inline ByteSequence::ByteSequence( sal_Int32 len, enum __ByteSequence_NoDefault ) + : _pSequence( NULL ) +{ + ::rtl_byte_sequence_constructNoDefault( &_pSequence, len ); + if (_pSequence == NULL) + throw ::std::bad_alloc(); +} + +inline ByteSequence::ByteSequence( sal_Sequence *pSequence, enum __ByteSequence_NoAcquire ) + : _pSequence( pSequence ) +{ +} + +inline ByteSequence::ByteSequence( sal_Int32 len ) + : _pSequence( NULL ) +{ + ::rtl_byte_sequence_construct( &_pSequence, len ); + if (_pSequence == NULL) + throw ::std::bad_alloc(); +} + +inline ByteSequence::~ByteSequence() +{ + ::rtl_byte_sequence_release( _pSequence ); +} + +inline ByteSequence & ByteSequence::operator = ( const ByteSequence & rSeq ) +{ + ::rtl_byte_sequence_assign( &_pSequence, rSeq._pSequence ); + return *this; +} + +#if defined LIBO_INTERNAL_ONLY +inline ByteSequence & ByteSequence::operator = ( ByteSequence && rSeq ) noexcept +{ + ::rtl_byte_sequence_release(_pSequence); + _pSequence = rSeq._pSequence; + rSeq._pSequence = nullptr; + return *this; +} +#endif + +inline bool ByteSequence::operator == ( const ByteSequence & rSeq ) const +{ + return ::rtl_byte_sequence_equals( _pSequence, rSeq._pSequence ); +} + +inline sal_Int8 * ByteSequence::getArray() +{ + ::rtl_byte_sequence_reference2One( &_pSequence ); + if (_pSequence == NULL) + throw ::std::bad_alloc(); + return reinterpret_cast<sal_Int8 *>(_pSequence->elements); +} + +inline void ByteSequence::realloc( sal_Int32 nSize ) +{ + ::rtl_byte_sequence_realloc( &_pSequence, nSize ); + if (_pSequence == NULL) + throw ::std::bad_alloc(); +} + +inline sal_Int8 & ByteSequence::operator [] ( sal_Int32 nIndex ) +{ + return getArray()[ nIndex ]; +} + +inline bool ByteSequence::operator != ( const ByteSequence & rSeq ) const +{ + return (! operator == ( rSeq )); +} + +} +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |