diff options
Diffstat (limited to '')
| -rw-r--r-- | offapi/com/sun/star/animations/XAnimationNode.idl | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/offapi/com/sun/star/animations/XAnimationNode.idl b/offapi/com/sun/star/animations/XAnimationNode.idl new file mode 100644 index 000000000..5c7286ce3 --- /dev/null +++ b/offapi/com/sun/star/animations/XAnimationNode.idl @@ -0,0 +1,243 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ +#ifndef __com_sun_star_animations_XAnimationNode_idl__ +#define __com_sun_star_animations_XAnimationNode_idl__ + +#include <com/sun/star/container/XChild.idl> +#include <com/sun/star/beans/NamedValue.idl> + + + module com { module sun { module star { module animations { + + +interface XAnimationNode : ::com::sun::star::container::XChild +{ + /** a value from AnimationNodeType. + + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-timeContainer + */ + [readonly, attribute] short Type; + + /** a sequence of values that define the beginning of this element + <br> + #Begin is + <ul> + <li>`double` describes the element begin as an offset in seconds from an implicit syncbase. + The definition of the implicit syncbase depends upon the element's parent time container. + The offset is measured in parent simple time.</li> + <li>Event describes an event and an optional offset that determine the + element begin. The element begin is defined relative to the time that the event + is raised.</li> + <li>Timing::INDEFINITE the begin of the element will be determined by an + external event to the element.</li> + <li>sequence<any> a sequence of values described above if more than + one begin value is defined for this element.</li> + <li>`VOID` if no begin behavior is defined for this element.</li> + </ul> + + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-begin + */ + [attribute] any Begin; + + /** defines the length of the simple duration. + <br> + #Duration is + <ul> + <li>`double` specifies the length of the simple duration in seconds.</li> + <li>Timing::INDEFINITE specifies the simple duration as indefinite.</li> + <li>Timing::MEDIA specifies the simple duration as the intrinsic media duration. This is only valid for elements that define media.</li> + <li>`VOID` the simple duration for the element is defined to be the implicit duration of the element.</li> + </ul> + + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-dur + */ + [attribute] any Duration; + + /** a sequence of values that define the ending of this element + <br> + #End is + <ul> + <li>`double` describes the element end as an offset in seconds from an implicit syncbase. + The definition of the implicit syncbase depends upon the element's parent time container. + The offset is measured in parent simple time.</li> + <li>Event describes an event and an optional offset that determine the + element end. The element end is defined relative to the time that the event + is raised.</li> + <li>Timing::INDEFINITE the end of the element will be determined by an + external event to the element.</li> + <li>sequence<any> a sequence of values described above if more than + one begin value is defined for this element.</li> + <li>`VOID` if no end behavior is defined for this element.</li> + </ul> + + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-end + */ + [attribute] any End; + + /** controls the implicit duration of time containers, + as a function of the children. + <br> + The EndSync attribute is only valid for + par and excl time container elements, and media elements with timed + children (e.g. animate or area elements). + + #EndSync is + either a `short` constant from EndSync, + an interface reference to a child XTimeContainer + or `VOID`. + + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-endsync + */ + [attribute] any EndSync; + + /** the number of iterations of the simple duration. + <br> + #RepeatCount is + <ul> + <li>`double` + this is a numeric value that specifies the number of iterations. + It can include partial iterations expressed as fraction values. + A fractional value describes a portion of the simple duration. + Values must be greater than 0.</li> + <li>Timing::INDEFINITE the element is defined to repeat indefinitely + (subject to the constraints of the parent time container).</li> + <li>`VOID` + no repeat count is defined for this element.</li> + </ul> + + @see EndSync + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-repeatCount + */ + [attribute] any RepeatCount; + + /** the total duration for repeat. + <br> + #RepeatDuration is + <ul> + <li>`double` + specifies the duration in element active time + to repeat the simple duration in seconds.</li> + <li>Timing::INDEFINITE the element is defined to repeat indefinitely + (subject to the constraints of the parent time container).</li> + <li>`VOID` + No repeat duration is defined for this element. </li> + </ul> + + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-repeatDur + */ + [attribute] any RepeatDuration; + + /** the attribute that specify the behavior how an element + should be extended beyond the active duration by freezing the final + state of the element. + <br> + #Fill is + a value from AnimationFill. + + @see Fill + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-fill + */ + [attribute] short Fill; + + /** the default value for the fill behavior for this element and all + descendants. + <br> + #FillDefault is + <ul> + <li>The values AnimationFill::REMOVE, AnimationFill::FREEZE, + AnimationFill::HOLD, AnimationFill::TRANSITION and AnimationFill::AUTO + specify that the element fill behavior is the respective value.</li> + <li>The value AnimationFill::INHERIT specifies that the value of this attribute + (and of the fill behavior) are inherited from the #FillDefault value of the parent + element. If there is no parent element, the value is AnimationFill::AUTO.</li> + </ul> + + @see Fill + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-fillDefault + */ + [attribute] short FillDefault; + + /** defines the restart behavior of this element. + <br> + #Restart is + a `short` value from AnimationRestart. + + @see AnimationRestart + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-restart + */ + [attribute] short Restart; + + /** defines the default restart behavior for this element and all descendants. + + @returns + a value from Restart. + + @see AnimationRestart + @see http://www.w3.org/TR/smil20/smil-timing.html#adef-restartDefault + */ + [attribute] short RestartDefault; + + /** defines the acceleration for this element. + <br> + Element time will accelerate from a rate of 0 at the beginning up + to a run rate, over the course of the specified proportion of the + simple duration. + + #Acceleration is + a value between 0 (no acceleration) and 1 (acceleration until end + of the elements duration). + + @see http://www.w3.org/TR/smil20/smil-timemanip.html#adef-accelerate + */ + [attribute] double Acceleration; + + /** defines the deceleration for this element. + Element time will deceleration from a run rate to a rate of 0 at the + ending, over the course of the specified proportion of the + simple duration. + + #Decelerate is + a value between 0 (no deceleration) and 1 (deceleration from beginning + of the elements duration). + + @see http://www.w3.org/TR/smil20/smil-timemanip.html#adef-decelerate + */ + [attribute] double Decelerate; + + /** defines the auto reverse settings for this element. + + #AutoReverse is + <ul> + <li>`FALSE` if the animation is played normal.</li> + <li>`TRUE` if the animation is played forwards and then backwards. This doubles the duration</li> + </ul> + + @see http://www.w3.org/TR/smil20/smil-timemanip.html#adef-autoReverse + */ + [attribute] boolean AutoReverse; + + [attribute] sequence< ::com::sun::star::beans::NamedValue > UserData; +}; + + +}; }; }; }; + +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |