diff options
Diffstat (limited to '')
| -rw-r--r-- | offapi/com/sun/star/ucb/Content.idl | 983 |
1 files changed, 983 insertions, 0 deletions
diff --git a/offapi/com/sun/star/ucb/Content.idl b/offapi/com/sun/star/ucb/Content.idl new file mode 100644 index 000000000..c80bdb872 --- /dev/null +++ b/offapi/com/sun/star/ucb/Content.idl @@ -0,0 +1,983 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#ifndef __com_sun_star_ucb_Content_idl__ +#define __com_sun_star_ucb_Content_idl__ + +#include <com/sun/star/ucb/XContent.idl> +#include <com/sun/star/lang/XComponent.idl> +#include <com/sun/star/ucb/XCommandProcessor.idl> +#include <com/sun/star/ucb/XCommandProcessor2.idl> +#include <com/sun/star/ucb/XCommandInfoChangeNotifier.idl> +#include <com/sun/star/beans/XPropertyContainer.idl> +#include <com/sun/star/beans/XPropertySetInfoChangeNotifier.idl> +#include <com/sun/star/beans/XPropertiesChangeNotifier.idl> +#include <com/sun/star/ucb/XContentCreator.idl> +#include <com/sun/star/container/XChild.idl> + +module com { module sun { module star { module ucb { + +/** A Content is a service that provides access to data of a + content provided by an implementation of the service + ContentProvider. +*/ +published service Content +{ + + /** provides access to the identity and the type of the content and + allows the registration of listeners for ContentEvents. + + <p>This interface is required. + */ + interface com::sun::star::ucb::XContent; + + /** must be implemented to make it possible to resolve cyclic object + references. + + <p>Those references i.e. may occur if there are listeners + registered at the content ( the content holds the listeners ) and + the implementation of the listener interface holds a reference on + the content. If the content shall be released, + com::sun::star::lang::XComponent::dispose() must + be called at the content. The implementation of this method must call + com::sun::star::lang::XEventListener::disposing() + on the registered listeners and release the appropriate object + references. At the other hand, the implementation of + XEventListener::disposing must release its appropriate references. + + <p>This interface is required. + */ + interface com::sun::star::lang::XComponent; + + /** enables the caller to let the content execute commands. + + <p>It is strongly recommended that any implementation supports the + improved XCommandProcessor2 interface.</p> + + <p>Typical commands are "open", "delete", "getPropertyValues" and + "setPropertyValues". Each content must support a set of standard + commands and properties. Also there is a set of predefined optionally + commands and properties. A content may define additional commands and + properties. </p> + + <p>This interface is required.</p> + + <h3>Commands</h3> + <h4>Mandatory commands</h4> + + <table style="border-width: 1px; border-spacing: 0px; border-style: solid; border-color: gray; border-collapse: collapse; background-color: white;" class="devdoc"> + <tr> + <th>Command Name</th> + <th>Return Type</th> + <th>Parameters</th> + <th>Description</th> + </tr> + <tr> + <td>getCommandInfo</td> + <td>XCommandInfo</td> + <td>void</td> + <td>This command obtains an interface which allows to query + information on commands supported by a content. + </td> + </tr> + <tr> + <td>getPropertySetInfo</td> + <td>com::sun::star::beans::XPropertySetInfo</td> + <td>void</td> + <td>This command obtains an interface which allows to query + information on properties supported by a content. + </td> + </tr> + <tr> + <td>getPropertyValues</td> + <td>com::sun::star::sdbc::XRow</td> + <td>sequence< com::sun::star::beans::Property > aProps</td> + <td>This command obtains property values from the content. + <blockquote> + <b>Note</b>: The execution will not be aborted, if there + are properties requested, that are unknown to the + content. The returned row object must contain a NULL + value in the corresponding column instead. + </blockquote> + </td> + </tr> + <tr> + <td>setPropertyValues</td> + <td>sequence< any ></td> + <td>sequence< com::sun::star::beans::PropertyValue > aValues</td> + <td>This command sets property values of the content. + <p>Note that setPropertyValues does not throw an exception in the case + that one or more of the requested property values cannot be set. + The implementation should set as much property values as possible.</p> + + <p>This command returns a sequence< any > which has exactly the same number + of elements like the number of properties to set. Every sequence + element contains the status for a property. The first sequence + elements corresponds to the first element in the sequence of + com::sun::star::beans::PropertyValue passed as + command argument, and so on. The exceptions will never be passed to + a com::sun::star::task::InteractionHandler.</p> + + <p>Every element in the returned sequence is an any containing:</p> + <ul> + <li>No value indicates, that the property value was set successfully.</li> + <li>com::sun::star::beans::UnknownPropertyException + indicates, that the property is not known to the content + implementation.</li> + <li>com::sun::star::beans::IllegalTypeException + indicates, that the data type of the property value is not + acceptable.</li> + <li>com::sun::star::lang::IllegalAccessException + indicates, that the property is constant + (com::sun::star::beans::PropertyAttribute::READONLY + is set).</li> + <li>com::sun::star::lang::IllegalArgumentException + indicates, that the property value is not acceptable. For instance, + setting an empty title may be illegal.</li> + <li>Any other exception derived from com::sun::star::uno::Exception + indicates, that the value was not set successfully. For example, + this can be an InteractiveAugmentedIOException + transporting the error code IOErrorCode::ACCESS_DENIED.</li> + </ul> + + <p>If the value to set is equal to the current value, no exception must + be added to the returned sequence</p> + </td> + </tr> + </table> + + <h4>Optional commands</h4> + <table style="border-width: 1px; border-spacing: 0px; border-style: solid; border-color: gray; border-collapse: collapse; background-color: white;" class="devdoc"> + <tr> + <th>Command Name</th> + <th>Return Type</th> + <th>Parameters</th> + <th>Description</th> + </tr> + <tr> + <td>open</td> + <td>XDynamicResultSet</td> + <td>OpenCommandArgument2 aOpenCommandArg</td> + <td> + For <b>folder</b> objects, this command will return an + implementation of service DynamicResultSet. + <p>The OpenCommandArgument2 members must be + filled as follows:</p> + <ul> + <li>com::sun::star::ucb::OpenCommandArgument::Mode: + com::sun::star::ucb::OpenMode::ALL or + com::sun::star::ucb::OpenMode::FOLDERS or + com::sun::star::ucb::OpenMode::DOCUMENTS. + The implementation of the open command MUST support all these modes! + </li> + <li>com::sun::star::ucb::OpenCommandArgument::Priority: + can be set, but implementation may ignore the value + </li> + <li>com::sun::star::ucb::OpenCommandArgument::Sink: + empty( ignored ) + </li> + <li>com::sun::star::ucb::OpenCommandArgument::Properties: + The properties for which the result set shall + contain the property values. The order of the + sequence is the same as the order of result set + columns. First element of sequence will be row + number one, second will be row number two, ... + </li> + <li>com::sun::star::ucb::OpenCommandArgument2::SortingInfo: + contains sort criteria, if result set shall + be sorted, otherwise it can be left empty. + </li> + </ul> + The execution must be aborted by the implementation of this command + (by throwing a CommandAbortedException), if an + unsupported mode is requested. + </td> + </tr> + <tr> + <td>open</td> + <td>void</td> + <td>OpenCommandArgument2 aOpenCommandArg</td> + <td>For non-folder objects, the OpenCommandArgument2 + struct will be prefilled with a data sink object, which + will be filled with the content data. + <p>The OpenCommandArgument2 members must be + filled as follows:</p> + <ul> + <li>com::sun::star::ucb::OpenCommandArgument::Mode: + com::sun::star::ucb::OpenMode::DOCUMENT or + com::sun::star::ucb::OpenMode::DOCUMENT_SHARE_DENY_NONE or + com::sun::star::ucb::OpenMode::DOCUMENT_SHARE_DENY_WRITE. + Support for DOCUMENT is mandatory, all others are optional. + </li> + <li>com::sun::star::ucb::OpenCommandArgument::Priority: + can be set, but implementation may ignore the value + </li> + <li>com::sun::star::ucb::OpenCommandArgument::Sink: + a sink, where the implementation can put the document data into. + </li> + <li>com::sun::star::ucb::OpenCommandArgument::Properties: empty ( ignored )</li> + <li>com::sun::star::ucb::OpenCommandArgument2::SortingInfo: empty ( ignored )</li> + </ul> + <p>The execution must be aborted by the implementation of this command + (by throwing a CommandAbortedException), if an + unsupported mode is requested.</p> + </td> + </tr> + <tr> + <td>createNewContent</td> + <td>XContent</td> + <td>ContentInfo contentinfo</td> + <td> + This command creates a new <b>non-persistent</b> content of a given type. + <p>This command must be supported by every Content + that supports the property "CreatableContentsInfo", if the returned + property value contains a non-empty sequence of creatable types. + <blockquote> + Note: This command is part of the replacement for the deprecated + interface XContentCreator. + </blockquote> + <p>Creation of a new <b>persistent</b> content: + <ol> + <li>creatabletypes = obtain "CreatableContentsInfo" property from creator</li> + <li>choose a suitable type from creatabletypes</li> + <li>newObject = execute command "createNewContent(type)" at creator</li> + <li>initialize the new object (i.e. newObject.Property1 = ...)</li> + <li>execute command "insert" at new content. This command + commits the data and makes the new content persistent.</li> + </ol> + </td> + </tr> + <tr> + <td>insert</td> + <td>void</td> + <td>InsertCommandArgument aInsertCommandArg</td> + <td> + <ol> + <li> + This command inserts a <b>new content</b>. It commits the process of + creating a new content via executing the command "createNewContent" + and initializing it via setting properties, afterwards.<br> + The command is not called on the content which created the new + content, because the new object already knows where it is to be + inserted (i.e. Calling createNewContent with the content type for a + message on a News Group creates a content which internally belongs + to the Outbox. Calling "insert" on that message will result in + posting the article to the appropriate News Group). Not calling + "insert" for the new content, i.e. because the user cancels writing + a new message, simply discards the new object. No extra call to + "delete" is necessary.<br> + On successful completion of this command, the parent of the inserted + content must propagate the change by notifying a + ContentEvent - ContentAction::INSERTED. + </li> + <li> + Additionally this command can be called at any time to overwrite + the data of an <b>existing content</b>. + </li> + </ol> + </td> + </tr> + <tr> + <td>update</td> + <td>void</td> + <td>OpenCommandArgument2 aOpenCommandArg</td> + <td>This command triggers an update operation on a content. + For example, when "updating" a POP3-Inbox, the content + for that box will get and store all new objects on the + appropriate server. The inserted contents will be + notified by calling + XContentEventListener::contentEvent(). + </td> + </tr> + <tr> + <td>synchronize</td> + <td>void</td> + <td>OpenCommandArgument2 aOpenCommandArg</td> + <td> + This command triggers a synchronization operation between locally + cached data and remote server's data. For example, when + "synchronizing" a POP3-Inbox the content for that box will get and + store all new objects and destroy all cached data for objects no + longer existing on the server. The inserted/deleted contents will + be notified by calling + XContent::contentEvent(). + </td> + </tr> + <tr> + <td>close</td> + <td>void</td> + <td>void</td> + <td>This command closes an object.</td> + </tr> + <tr> + <td>delete</td> + <td>void</td> + <td>boolean bDeletePhysically</td> + <td> + This command deletes an object. If `TRUE` is passed as parameter, + the object will be destroyed physically. Otherwise it will be put + into trash can, if such a service is available and the object to + be deleted supports the command "undelete". + On successful completion of this command, the deleted content + must propagate its deletion by notifying a ContentEvent + - ContentAction::DELETED. Additionally, the contents + parent must notify a ContentEvent + - ContentAction::REMOVED + </td> + </tr> + <tr> + <td>undelete</td> + <td>void</td> + <td>void</td> + <td> + This command restores an object previously deleted into trash. It + must be supported by objects which claim to be undeletable, but + should never be called directly. + </td> + </tr> + <tr> + <td>search</td> + <td>XDynamicResultSet</td> + <td>SearchCommandArgument aSearchCommandArg</td> + <td> + This command searches for subcontents of a content matching the + given search criteria. The command will return an implementation + of service DynamicResultSet. + </td> + </tr> + <tr> + <td>transfer</td> + <td>void</td> + <td>TransferInfo aTransferInfo</td> + <td> + <blockquote> + <b>Important note:</b> A client that wants to transfer data should + not execute this command, but it should execute the command + "globalTransfer" at the UniversalContentBroker. + This command is able to transfer all kind of content + supported by that UCB. + </blockquote> + This command transfers (copies/moves) an object from one location + to another. It must be executed at the folder content representing + the <b>destination</b> of the transfer operation.<br> + Note that the implementation need not be able to handle + any type of contents.<br> + Generally, there are good chances that a transfer of a content will + succeed, if source and target folder have the same URL scheme. + But there is no guaranty for that.<br> + For instance, moving a message from a folder on IMAP server A + to a folder on IMAP server B may fail, because the transfer + command can't be implemented efficiently for this scenario, + because it is not directly supported by the IMAP protocol. + On the other hand, moving a message from one folder to + another folder on the same IMAP server should work, because it can + be implemented efficiently.<br> + If an implementation is not able to handle a given source URL, + it should indicate this by issuing a + InteractiveBadTransferURLException interaction request.<br> + Source and target folder may be the same when doing a move operation. + <br> + Transfers without the transfer command can be done as follows: + <ol> + <li>Create a new content at the target folder<br> + <code>targetContent = target.execute( "createNewContent", type )</code> + </li> + <li>Transfer data from source to target content<br> + <code>props = sourceContent.execute( "getPropertyValues", ... )</code> + <code>dataStream = sourceContent.execute( "open", ... )</code> + <code>targetContent.execute( "setPropertyValues", props )</code> + </li> + <li>Insert ( commit ) the new content<br> + <code>targetContent.execute( "insert", dataStream )</code> + </li> + <li>For move operations only: destroy the source content<br> + <code>sourceContent.execute( "delete", ... )</code> + </li> + </ol> + <p>This mechanism should work for all transfer operations, but generally + it's less efficient than the transfer command.</p> + </td> + </tr> + <tr> + <td>lock</td> + <td>void</td> + <td>void</td> + <td> + This command obtains an exclusive write lock for the resource. The + lock is active until command "unlock" is executed, or the OOo + session that obtained the lock ends, or until the lock is released by + a third party (e.g. a system administrator).<br> + Exceptions: + <ul> + <li>InteractiveLockingLockedException</li> + <li>InteractiveLockingLockExpiredException</li> + </ul> + </td> + </tr> + <tr> + <td>unlock</td> + <td>void</td> + <td>void</td> + <td> + This command removes a lock obtained by executing the command "lock" + from the resource.<br> + <p>Exceptions: + <ul> + <li>InteractiveLockingLockedException</li> + <li>InteractiveLockingLockExpiredException</li> + </ul> + </p> + <p>Note that InteractiveLockingLockExpiredException might + be raised by any command that requires a previously obtained lock. + </p> + </td> + </tr> + <tr> + <td>addProperty</td> + <td>void</td> + <td>PropertyCommandArgument aCmdArg</td> + <td> + Adds a new properties to the content. + <p> + PropertyCommandArgument::Property + contains information about the property to be added. + PropertyCommandArgument::DefaultValue + may contain the default value for the property. Its type must + match the one specified in com::sun::star::beans::Property::Type. + </p> + <p>Note that the dynamic properties must be kept persistent. The + service Store (UCB persistence service) may be used to + implement this.</p> + <p><b>Important:</b> The implementation must at least support + adding properties of the following basic data types:</p> + <p> + <ul> + <li>boolean + <li>char + <li>byte + <li>string + <li>short + <li>long + <li>hyper + <li>float + <li>double + </ul> + </p> + <p> + Raises a ::com::sun::star::beans::PropertyExistException + if a property with the same name already exists; + ::com::sun::star::beans::IllegalTypeException + if the property has an unsupported type; + ::com::sun::star::lang::IllegalArgumentException + if the Name of the property is empty.</p> + <blockquote> + Note: This command is new since Apache OpenOffice 4.0, LibreOffice 4.2 and replaces the deprecated interface method + com::sun::star::beans::XPropertyContainer::addProperty. + </blockquote> + </td> + </tr> + <tr> + <td>removeProperty</td> + <td>void</td> + <td>string PropertyName</td> + <td>Removes the properties from the content. + <p>Raises a ::com::sun::star::beans::UnknownPropertyException + if the property does not exist; + ::com::sun::star::beans::NotRemoveableException + if the property is not removable.</p> + <blockquote> + Note: This command is new since Apache OpenOffice 4.0, LibreOffice 4.2 and replaces the deprecated interface method + com::sun::star::beans::XPropertyContainer::removeProperty. + </blockquote> + </td> + </tr> + </table> + + <h3>Properties</h3> + <h4>Mandatory properties</h4> + + <table style="border-width: 1px; border-spacing: 0px; border-style: solid; border-color: gray; border-collapse: collapse; background-color: white;" class="devdoc"> + <tr> + <th>Name</th> + <th>Type</th> + <th>Description</th> + </tr> + <tr> + <td>ContentType</td> + <td>string</td> + <td> + contains a unique type string for the content + ( i.e. "application/vnd.sun.star.hierarchy-link" ). + <p>This property is always read-only.</p> + <p>The ContentType should not be confused with the MIME + media type ( MIME types ) of the content. Media types + may be provided through the optional property "MediaType".</p> + <p>The value of this property should match the information on creatable + contents given by UCB contents that implement the property + "CreatableContentsInfo".</p> + </td> + </tr> + <tr> + <td>IsFolder</td> + <td>boolean</td> + <td>indicates, whether a content can contain other contents.</td> + </tr> + <tr> + <td>IsDocument</td> + <td>boolean</td> + <td>indicates, whether a content is a document. This means, + the content can dump itself into a data sink. + </td> + </tr> + <tr> + <td>Title</td> + <td>string</td> + <td>contains the title of an object (e.g. the subject of a message).</td> + </tr> + </table> + + <h4>Optional properties</h4> + + <table style="border-width: 1px; border-spacing: 0px; border-style: solid; border-color: gray; border-collapse: collapse; background-color: white;" class="devdoc"> + <tr> + <th>Name</th> + <th>Type</th> + <th>Description</th> + </tr> + <tr> + <td>AutoUpdateInterval</td> + <td>long</td> + <td>contains the interval for automatic updates of an object. + It is specified in seconds. + </td> + </tr> + <tr> + <td>ConnectionLimit</td> + <td>short</td> + <td>contains the maximum number of network connections + allowed for one (internet) protocol at a time. (e.g. The HTTP + cache can be configured to use a maximum for the number of + connections used for browsing.) + </td> + </tr> + <tr> + <td>ConnectionMode</td> + <td>short</td> + <td>contains the current connection mode for the object. + (see ConnectionMode) + </td> + </tr> + <tr> + <td>CreatableContentsInfo</td> + <td>sequence ContentInfo</td> + <td> + contains the types of Contents a Content object can create via + command "createNewContent". + <p>If the property value can be a non-empty sequence, the + Content must also support command "createNewContent".</p> + <blockquote> + Note: This property is part of the replacement for the deprecated + interface XContentCreator. + </blockquote> + </td> + </tr> + <tr> + <td>DateCreated</td> + <td>com::sun::star::util::DateTime</td> + <td>contains the date and time the object was created.</td> + </tr> + <tr> + <td>DateModified</td> + <td>com::sun::star::util::DateTime</td> + <td>contains the date and time the object was last modified.</td> + </tr> + <tr> + <td>DocumentCount</td> + <td>long</td> + <td>contains the count of documents of a folder.</td> + </tr> + <tr> + <td>DocumentCountMarked</td> + <td>long</td> + <td>contains the count of marked documents within a folder.</td> + </tr> + <tr> + <td>DocumentHeader</td> + <td>sequence< DocumentHeaderField > </td> + <td>contains a sequence of document header fields (i.e. header + fields of a MIME-message, or the document info of an + office document ). For some standard header fields there + are predefined separate properties, like "MessageTo". + </td> + </tr> + <tr> + <td>DocumentStoreMode</td> + <td>DocumentStoreMode</td> + <td>contains information about the way a folder stores the + contents of (remote) documents. + </td> + </tr> + <tr> + <td>FolderCount</td> + <td>long</td> + <td>contains the count of subfolders of a folder.</td> + </tr> + <tr> + <td>FreeSpace</td> + <td>hyper</td> + <td>contains the free space left on a storage device. It is + specified in bytes.</td> + </tr> + <tr> + <td>HasDocuments</td> + <td>boolean</td> + <td>indicates whether a content has subcontents, which are documents.</td> + </tr> + <tr> + <td>HasFolders</td> + <td>boolean</td> + <td>indicates whether a content has subcontents, which are folders.</td> + </tr> + <tr> + <td>IsMarked</td> + <td>boolean</td> + <td>indicates whether a content is "marked".</td> + </tr> + <tr> + <td>IsRead</td> + <td>boolean</td> + <td>indicates whether a content has been "read".</td> + </tr> + <tr> + <td>IsReadOnly</td> + <td>boolean</td> + <td>indicates whether a content is read-only.</td> + </tr> + <tr> + <td>IsSubscribed</td> + <td>boolean</td> + <td>indicates whether a content is subscribed.</td> + </tr> + <tr> + <td>IsTimeLimitedStore</td> + <td>boolean</td> + <td>indicates whether the feature to store contents + depending on their age is active.</td> + </tr> + <tr> + <td>UpdateOnOpen</td> + <td>boolean</td> + <td>indicates whether (sub)contents shall be automatically updated + every time a (folder) content is opened.<br>This property may be + used to control whether a folder content should read data only + from local cache when it is opened, or whether it should connect + to a server to obtain latest data.</td> + </tr> + <tr> + <td>Keywords</td> + <td>string</td> + <td>contains the keywords of a document (e.g. the value + of the "keywords" header field of a news article).</td> + </tr> + <tr> + <td>MediaType</td> + <td>string</td> + <td>contains the media type ( MIME type ) of a content. It is highly + recommended to support this property if the content's implementation + can obtain the media type natively from its data source ( i.e. + HTTP servers provide media types for all their documents ). + </td> + </tr> + <tr> + <td>MessageBCC</td> + <td>string</td> + <td>contains the BCC (blind carbon copy) receiver(s) of a message.</td> + </tr> + <tr> + <td>MessageCC</td> + <td>string</td> + <td>contains the CC (carbon copy) receiver(s) of a message.</td> + </tr> + <tr> + <td>MessageFrom</td> + <td>string</td> + <td>contains (the address of) the sender of a message.</td> + </tr> + <tr> + <td>MessageId</td> + <td>string</td> + <td>contains the ID of a message.</td> + </tr> + <tr> + <td>MessageInReplyTo</td> + <td>string</td> + <td>contains the "In-Reply-To" field of a message.</td> + </tr> + <tr> + <td>MessageReplyTo</td> + <td>string</td> + <td>contains the "Reply-To" field of a message.</td> + </tr> + <tr> + <td>MessageTo</td> + <td>string</td> + <td>contains the recipient(s) of a message.</td> + </tr> + <tr> + <td>NewsGroups</td> + <td>string</td> + <td>contains the name(s) of the newsgroup(s) into which a message was posted.</td> + </tr> + <tr> + <td>Password</td> + <td>string</td> + <td>contains a password (e.g. needed to access a POP3-Server).</td> + </tr> + <tr> + <td>Priority</td> + <td>Priority</td> + <td>contains a priority (i.e. of a message).</td> + </tr> + <tr> + <td>References</td> + <td>string</td> + <td>contains the "References" field of a news article.</td> + </tr> + <tr> + <td>Rules</td> + <td>RuleSet</td> + <td>contains the rules set for a content.</td> + </tr> + <tr> + <td>SeenCount</td> + <td>long</td> + <td>contains the count of seen/read subcontents of a folder content.</td> + </tr> + <tr> + <td>ServerBase</td> + <td>string</td> + <td>contains the base directory to use on a server. (e.g. Setting + the server base of an FTP-Account to "/pub/incoming" + will result in showing contents from that directory and not from + server's root directory) + </td> + </tr> + <tr> + <td>ServerName</td> + <td>string</td> + <td>contains a server name (e.g. The name of the server to use for + a POP3-Account). + </td> + </tr> + <tr> + <td>ServerPort</td> + <td>short</td> + <td>contains a numeric server port.</td> + </tr> + <tr> + <td>Size</td> + <td>hyper</td> + <td>contains the size (usually in bytes) of an object.</td> + </tr> + <tr> + <td>SizeLimit</td> + <td>hyper</td> + <td>contains a size limit for an object. (e.g. One may specify the + maximum size of the HTTP-Cache) + </td> + </tr> + <tr> + <td>SubscribedCount</td> + <td>long</td> + <td>contains the count of subscribed contents of a folder.</td> + </tr> + <tr> + <td>SynchronizePolicy</td> + <td>SynchronizePolicy</td> + <td>contains the policy to use when synchronizing two objects.</td> + </tr> + <tr> + <td>TargetFrames</td> + <td>string</td> + <td>contains information about the target frame to use when displaying + an object. + <p>The value is a string containing three tokens, separated by ";" + (A semicolon):<br/> + <dl> + <dt>1st token</dt> + <dd>Behavior on "select" ( single click )</dd> + <dt>2nd token</dt> + <dd>Behavior on "open" ( double click )</dd> + <dt>3rd token</dt> + <dd>Behavior on "open in new task" ( double click + CTRL key )</dd> + </dl> + </p> + <p> Each token may contain the following values:<br/> + <dl> + <dt>"_beamer"</dt> + <dd>Show in "Beamer"</dd> + <dt>"_top"</dt> + <dd>Show in current frame (replaces old)</dd> + <dt>"_blank"</dt> + <dd>Show in new task</dd> + </dl> + </p> + </td> + </tr> + <tr> + <td>TargetURL</td> + <td>string</td> + <td>for contents that are links to other contents, contains the URL of + the target content</td> + </tr> + <tr> + <td>TimeLimitStore</td> + <td>short</td> + <td>contains the value to use if the property "IsTimeLimitedStore" is set.</td> + </tr> + <tr> + <td>UserName</td> + <td>string</td> + <td>contains a user name. (e.g. the user name needed to access a + POP3-Account)</td> + </tr> + <tr> + <td>VerificationMode</td> + <td>VerificationMode </td> + <td>describes a verification policy.</td> + </tr> + </table> + */ + interface com::sun::star::ucb::XCommandProcessor; + + + /** is an enhanced version of XCommandProcessor that has an + additional method for releasing command identifiers obtained via + XCommandProcessor::createCommandIdentifier() to avoid + resource leaks. For a detailed description of the problem refer to + XCommandProcessor2::releaseCommandIdentifier(). + + <p>Where many existing Content implementations do not + (yet), every new implementation should support this interface. + */ + [optional] interface com::sun::star::ucb::XCommandProcessor2; + + /** notifies changes of property values to listeners registered for + those properties. + + <p>This interface is required. + */ + interface com::sun::star::beans::XPropertiesChangeNotifier; + + /** can be used to add new properties to the content and to remove + properties from the content dynamically. + + <p>Note that the dynamic properties must be kept persistent. The + service Store (UCB persistence service) may be used to + implement this. + + <p><b>Important:</b> The implementation of + com::sun::star::beans::XPropertyContainer::addProperty() + must at least support adding properties of the following basic data + types: + + <p> + <ul> + <li>boolean + <li>char + <li>byte + <li>string + <li>short + <li>long + <li>hyper + <li>float + <li>double + </ul> + </p> + + <p>If a property with an unsupported type shall be added a + com::sun::star::beans::IllegalTypeException must + be raised. + + @deprecated + <p>This interface is <b>deprecated</b>, because a + ContentProvider might need a + XCommandEnvironment to perform the tasks of adding and + removing properties. New implementations should implement the + respective commands "addProperty" and "removeProperty" instead. + */ + interface com::sun::star::beans::XPropertyContainer; + + /** can be used to notify properties removed from or added to the + content's property set. + + <p>This interface must be implemented, if the implementation can + dynamically change it's property set ( e.g. because it implements + the interface + com::sun::star::beans::XPropertyContainer. ) + */ + [optional] interface com::sun::star::beans::XPropertySetInfoChangeNotifier; + + /** can be used to notify commands removed from or added to the + content's command set. + + <p>This interface must be implemented, if the implementation can + dynamically change it's command set ( e.g. because the set of + available commands depends on the value of a property of the + content ). + + <p>This interface is optional. + */ + [optional] interface com::sun::star::ucb::XCommandInfoChangeNotifier; + + /** creates new contents (i.e. creates a new folder in another folder + somewhere in the local file system). + + <p>A content is "new", if it does not physically exist before creating + it using this interface. + + <p>This interface is optional. It should be implemented by contents + which shall be able to create new objects. + + @deprecated + + <p>This interface is <b>deprecated</b>. Use property + "CreatableContentsInfo" and command "createNewContent" instead. + */ + [optional] interface com::sun::star::ucb::XContentCreator; + + /** provides access to the parent content of this content. + + <p>The object returned by the implementation of the method + com::sun::star::container::XChild::getParent() + must implement the service Content. If the content is a + root object, an empty interface may be returned. + + <p>This interface must be implemented by a content which is a (logical) + child of a content. + */ + [optional] interface com::sun::star::container::XChild; +}; + + +}; }; }; }; + +#endif + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |