diff options
Diffstat (limited to 'onlineupdate/source/service/workmonitor.cxx')
| -rw-r--r-- | onlineupdate/source/service/workmonitor.cxx | 770 |
1 files changed, 770 insertions, 0 deletions
diff --git a/onlineupdate/source/service/workmonitor.cxx b/onlineupdate/source/service/workmonitor.cxx new file mode 100644 index 000000000..6228b1e6c --- /dev/null +++ b/onlineupdate/source/service/workmonitor.cxx @@ -0,0 +1,770 @@ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +#include <shlobj.h> +#include <shlwapi.h> +#include <wtsapi32.h> +#include <userenv.h> +#include <shellapi.h> +#include <cstddef> + +#pragma comment(lib, "wtsapi32.lib") +#pragma comment(lib, "userenv.lib") +#pragma comment(lib, "shlwapi.lib") +#pragma comment(lib, "ole32.lib") +#pragma comment(lib, "rpcrt4.lib") + +#include "workmonitor.hxx" +#include "serviceinstall.hxx" +#include "servicebase.hxx" +#include "registrycertificates.hxx" +#include "uachelper.h" +#include "updatehelper.h" +#include "errors.h" +#include "windowsHelper.hxx" + +// Wait 15 minutes for an update operation to run at most. +// Updates usually take less than a minute so this seems like a +// significantly large and safe amount of time to wait. +static const int TIME_TO_WAIT_ON_UPDATER = 15 * 60 * 1000; +wchar_t* MakeCommandLine(int argc, wchar_t **argv); +BOOL WriteStatusFailure(LPCWSTR updateDirPath, int errorCode); +BOOL PathGetSiblingFilePath(LPWSTR destinationBuffer, LPCWSTR siblingFilePath, + LPCWSTR newFileName); + +/* + * Read the update.status file and sets isApplying to true if + * the status is set to applying. + * + * @param updateDirPath The directory where update.status is stored + * @param isApplying Out parameter for specifying if the status + * is set to applying or not. + * @return TRUE if the information was filled. +*/ +static BOOL +IsStatusApplying(LPCWSTR updateDirPath, BOOL &isApplying) +{ + isApplying = FALSE; + WCHAR updateStatusFilePath[MAX_PATH + 1] = {L'\0'}; + wcsncpy(updateStatusFilePath, updateDirPath, MAX_PATH); + if (!PathAppendSafe(updateStatusFilePath, L"update.status")) + { + LOG_WARN(("Could not append path for update.status file")); + return FALSE; + } + + AutoHandle statusFile(CreateFileW(updateStatusFilePath, GENERIC_READ, + FILE_SHARE_READ | + FILE_SHARE_WRITE | + FILE_SHARE_DELETE, + nullptr, OPEN_EXISTING, 0, nullptr)); + + if (statusFile == INVALID_HANDLE_VALUE) + { + LOG_WARN(("Could not open update.status file")); + return FALSE; + } + + char buf[32] = { 0 }; + DWORD read; + if (!ReadFile(statusFile.get(), buf, sizeof(buf), &read, nullptr)) + { + LOG_WARN(("Could not read from update.status file")); + return FALSE; + } + + LOG(("updater.exe returned status: %s", buf)); + + const char kApplying[] = "applying"; + isApplying = strncmp(buf, kApplying, + sizeof(kApplying) - 1) == 0; + return TRUE; +} + +/** + * Determines whether we're staging an update. + * + * @param argc The argc value normally sent to updater.exe + * @param argv The argv value normally sent to updater.exe + * @return boolean True if we're staging an update + */ +static bool +IsUpdateBeingStaged(int argc, LPWSTR *argv) +{ + // PID will be set to -1 if we're supposed to stage an update. + return argc == 4 && !wcscmp(argv[3], L"-1") || + argc == 5 && !wcscmp(argv[4], L"-1"); +} + +/** + * Determines whether the param only contains digits. + * + * @param str The string to check + * @param boolean True if the param only contains digits + */ +static bool +IsDigits(WCHAR *str) +{ + while (*str) + { + if (!iswdigit(*str++)) + { + return FALSE; + } + } + return TRUE; +} + +/** + * Determines whether the command line contains just the directory to apply the + * update to (old command line) or if it contains the installation directory and + * the directory to apply the update to. + * + * @param argc The argc value normally sent to updater.exe + * @param argv The argv value normally sent to updater.exe + * @param boolean True if the command line contains just the directory to apply + * the update to + */ +static bool +IsOldCommandline(int argc, LPWSTR *argv) +{ + return argc == 4 && !wcscmp(argv[3], L"-1") || + argc >= 4 && (wcsstr(argv[3], L"/replace") || IsDigits(argv[3])); +} + +/** + * Gets the installation directory from the arguments passed to updater.exe. + * + * @param argcTmp The argc value normally sent to updater.exe + * @param argvTmp The argv value normally sent to updater.exe + * @param aResultDir Buffer to hold the installation directory. + */ +static BOOL +GetInstallationDir(int argcTmp, LPWSTR *argvTmp, WCHAR aResultDir[MAX_PATH + 1]) +{ + int index = 3; + if (IsOldCommandline(argcTmp, argvTmp)) + { + index = 2; + } + + if (argcTmp < index) + { + return FALSE; + } + + wcsncpy(aResultDir, argvTmp[2], MAX_PATH); + WCHAR* backSlash = wcsrchr(aResultDir, L'\\'); + // Make sure that the path does not include trailing backslashes + if (backSlash && (backSlash[1] == L'\0')) + { + *backSlash = L'\0'; + } + + // The new command line's argv[2] is always the installation directory. + if (index == 2) + { + bool backgroundUpdate = IsUpdateBeingStaged(argcTmp, argvTmp); + bool replaceRequest = (argcTmp >= 4 && wcsstr(argvTmp[3], L"/replace")); + if (backgroundUpdate || replaceRequest) + { + return PathRemoveFileSpecW(aResultDir); + } + } + return TRUE; +} + +/** + * Runs an update process as the service using the SYSTEM account. + * + * @param argc The number of arguments in argv + * @param argv The arguments normally passed to updater.exe + * argv[0] must be the path to updater.exe + * @param processStarted Set to TRUE if the process was started. + * @return TRUE if the update process was run had a return code of 0. + */ +BOOL +StartUpdateProcess(int argc, + LPWSTR *argv, + LPCWSTR installDir, + BOOL &processStarted) +{ + LOG(("Starting update process as the service in session 0.")); + STARTUPINFO si = {0}; + si.cb = sizeof(STARTUPINFO); + si.lpDesktop = L"winsta0\\Default"; + PROCESS_INFORMATION pi = {0}; + + // The updater command line is of the form: + // updater.exe update-dir apply [wait-pid [callback-dir callback-path args]] + LPWSTR cmdLine = MakeCommandLine(argc, argv); + + int index = 3; + if (IsOldCommandline(argc, argv)) + { + index = 2; + } + + // If we're about to start the update process from session 0, + // then we should not show a GUI. This only really needs to be done + // on Vista and higher, but it's better to keep everything consistent + // across all OS if it's of no harm. + if (argc >= index) + { + // Setting the desktop to blank will ensure no GUI is displayed + si.lpDesktop = L""; + si.dwFlags |= STARTF_USESHOWWINDOW; + si.wShowWindow = SW_HIDE; + } + + // We move the updater.ini file out of the way because we will handle + // executing PostUpdate through the service. We handle PostUpdate from + // the service because there are some per user things that happen that + // can't run in session 0 which we run updater.exe in. + // Once we are done running updater.exe we rename updater.ini back so + // that if there were any errors the next updater.exe will run correctly. + WCHAR updaterINI[MAX_PATH + 1]; + WCHAR updaterINITemp[MAX_PATH + 1]; + BOOL selfHandlePostUpdate = FALSE; + // We use the updater.ini from the same directory as the updater.exe + // because of background updates. + if (PathGetSiblingFilePath(updaterINI, argv[0], L"updater.ini") && + PathGetSiblingFilePath(updaterINITemp, argv[0], L"updater.tmp")) + { + selfHandlePostUpdate = MoveFileExW(updaterINI, updaterINITemp, + MOVEFILE_REPLACE_EXISTING); + } + + // Add an env var for USING_SERVICE so the updater.exe can + // do anything special that it needs to do for service updates. + // Search in updater.cpp for more info on USING_SERVICE. + putenv(const_cast<char*>("USING_SERVICE=1")); + LOG(("Starting service with cmdline: %ls", cmdLine)); + processStarted = CreateProcessW(argv[0], cmdLine, + nullptr, nullptr, FALSE, + CREATE_DEFAULT_ERROR_MODE, + nullptr, + nullptr, &si, &pi); + // Empty value on putenv is how you remove an env variable in Windows + putenv(const_cast<char*>("USING_SERVICE=")); + + BOOL updateWasSuccessful = FALSE; + if (processStarted) + { + // Wait for the updater process to finish + LOG(("Process was started... waiting on result.")); + DWORD waitRes = WaitForSingleObject(pi.hProcess, TIME_TO_WAIT_ON_UPDATER); + if (WAIT_TIMEOUT == waitRes) + { + // We waited a long period of time for updater.exe and it never finished + // so kill it. + TerminateProcess(pi.hProcess, 1); + } + else + { + // Check the return code of updater.exe to make sure we get 0 + DWORD returnCode; + if (GetExitCodeProcess(pi.hProcess, &returnCode)) + { + LOG(("Process finished with return code %d.", returnCode)); + // updater returns 0 if successful. + updateWasSuccessful = (returnCode == 0); + } + else + { + LOG_WARN(("Process finished but could not obtain return code.")); + } + } + CloseHandle(pi.hProcess); + CloseHandle(pi.hThread); + + // Check just in case updater.exe didn't change the status from + // applying. If this is the case we report an error. + BOOL isApplying = FALSE; + if (IsStatusApplying(argv[1], isApplying) && isApplying) + { + if (updateWasSuccessful) + { + LOG(("update.status is still applying even know update " + " was successful.")); + if (!WriteStatusFailure(argv[1], + SERVICE_STILL_APPLYING_ON_SUCCESS)) + { + LOG_WARN(("Could not write update.status still applying on" + " success error.")); + } + // Since we still had applying we know updater.exe didn't do its + // job correctly. + updateWasSuccessful = FALSE; + } + else + { + LOG_WARN(("update.status is still applying and update was not successful.")); + if (!WriteStatusFailure(argv[1], + SERVICE_STILL_APPLYING_ON_FAILURE)) + { + LOG_WARN(("Could not write update.status still applying on" + " success error.")); + } + } + } + } + else + { + DWORD lastError = GetLastError(); + LOG_WARN(("Could not create process as current user, " + "updaterPath: %ls; cmdLine: %ls. (%d)", + argv[0], cmdLine, lastError)); + } + + // Now that we're done with the update, restore back the updater.ini file + // We use it ourselves, and also we want it back in case we had any type + // of error so that the normal update process can use it. + if (selfHandlePostUpdate) + { + MoveFileExW(updaterINITemp, updaterINI, MOVEFILE_REPLACE_EXISTING); + + // Only run the PostUpdate if the update was successful + if (updateWasSuccessful && argc > index) + { + LPCWSTR updateInfoDir = argv[1]; + bool stagingUpdate = IsUpdateBeingStaged(argc, argv); + + // Launch the PostProcess with admin access in session 0. This is + // actually launching the post update process but it takes in the + // callback app path to figure out where to apply to. + // The PostUpdate process with user only access will be done inside + // the unelevated updater.exe after the update process is complete + // from the service. We don't know here which session to start + // the user PostUpdate process from. + // Note that we don't need to do this if we're just staging the + // update in the background, as the PostUpdate step runs when + // performing the replacing in that case. + if (!stagingUpdate) + { + LOG(("Launching post update process as the service in session 0.")); + if (!LaunchWinPostProcess(installDir, updateInfoDir, true, nullptr)) + { + LOG_WARN(("The post update process could not be launched." + " installDir: %ls, updateInfoDir: %ls", + installDir, updateInfoDir)); + } + } + } + } + + free(cmdLine); + return updateWasSuccessful; +} + +/** + * Processes a software update command + * + * @param argc The number of arguments in argv + * @param argv The arguments normally passed to updater.exe + * argv[0] must be the path to updater.exe + * @return TRUE if the update was successful. + */ +BOOL +ProcessSoftwareUpdateCommand(DWORD argc, LPWSTR *argv) +{ + BOOL result = TRUE; + if (argc < 3) + { + LOG_WARN(("Not enough command line parameters specified. " + "Updating update.status.")); + + // We can only update update.status if argv[1] exists. argv[1] is + // the directory where the update.status file exists. + if (argc < 2 || + !WriteStatusFailure(argv[1], + SERVICE_NOT_ENOUGH_COMMAND_LINE_ARGS)) + { + LOG_WARN(("Could not write update.status service update failure. (%d)", + GetLastError())); + } + return FALSE; + } + + WCHAR installDir[MAX_PATH + 1] = {L'\0'}; + if (!GetInstallationDir(argc, argv, installDir)) + { + LOG_WARN(("Could not get the installation directory")); + if (!WriteStatusFailure(argv[1], + SERVICE_INSTALLDIR_ERROR)) + { + LOG_WARN(("Could not write update.status for GetInstallationDir failure.")); + } + return FALSE; + } + + // Make sure the path to the updater to use for the update is local. + // We do this check to make sure that file locking is available for + // race condition security checks. + BOOL isLocal = FALSE; + if (!IsLocalFile(argv[0], isLocal) || !isLocal) + { + LOG_WARN(("Filesystem in path %ls is not supported (%d)", + argv[0], GetLastError())); + if (!WriteStatusFailure(argv[1], + SERVICE_UPDATER_NOT_FIXED_DRIVE)) + { + LOG_WARN(("Could not write update.status service update failure. (%d)", + GetLastError())); + } + return FALSE; + } + + AutoHandle noWriteLock(CreateFileW(argv[0], GENERIC_READ, FILE_SHARE_READ, + nullptr, OPEN_EXISTING, 0, nullptr)); + if (noWriteLock == INVALID_HANDLE_VALUE) + { + LOG_WARN(("Could not set no write sharing access on file. (%d)", + GetLastError())); + if (!WriteStatusFailure(argv[1], + SERVICE_COULD_NOT_LOCK_UPDATER)) + { + LOG_WARN(("Could not write update.status service update failure. (%d)", + GetLastError())); + } + return FALSE; + } + + // Verify that the updater.exe that we are executing is the same + // as the one in the installation directory which we are updating. + // The installation dir that we are installing to is installDir. + WCHAR installDirUpdater[MAX_PATH + 1] = { L'\0' }; + wcsncpy(installDirUpdater, installDir, MAX_PATH); + if (!PathAppendSafe(installDirUpdater, L"updater.exe")) + { + LOG_WARN(("Install directory updater could not be determined.")); + result = FALSE; + } + + BOOL updaterIsCorrect = FALSE; + if (result && !VerifySameFiles(argv[0], installDirUpdater, + updaterIsCorrect)) + { + LOG_WARN(("Error checking if the updaters are the same.\n" + "Path 1: %ls\nPath 2: %ls", argv[0], installDirUpdater)); + result = FALSE; + } + + if (result && !updaterIsCorrect) + { + LOG_WARN(("The updaters do not match, updater will not run.\n" + "Path 1: %ls\nPath 2: %ls", argv[0], installDirUpdater)); + result = FALSE; + } + + if (result) + { + LOG(("updater.exe was compared successfully to the installation directory" + " updater.exe.")); + } + else + { + if (!WriteStatusFailure(argv[1], + SERVICE_UPDATER_COMPARE_ERROR)) + { + LOG_WARN(("Could not write update.status updater compare failure.")); + } + return FALSE; + } + + // Check to make sure the updater.exe module has the unique updater identity. + // This is a security measure to make sure that the signed executable that + // we will run is actually an updater. + HMODULE updaterModule = LoadLibraryEx(argv[0], nullptr, + LOAD_LIBRARY_AS_DATAFILE); + if (!updaterModule) + { + LOG_WARN(("updater.exe module could not be loaded. (%d)", GetLastError())); + result = FALSE; + } + else + { + char updaterIdentity[64]; + if (!LoadStringA(updaterModule, IDS_UPDATER_IDENTITY, + updaterIdentity, sizeof(updaterIdentity))) + { + LOG_WARN(("The updater.exe application does not contain the Mozilla" + " updater identity.")); + result = FALSE; + } + + if (strcmp(updaterIdentity, UPDATER_IDENTITY_STRING)) + { + LOG_WARN(("The updater.exe identity string is not valid.")); + result = FALSE; + } + FreeLibrary(updaterModule); + } + + if (result) + { + LOG(("The updater.exe application contains the Mozilla" + " updater identity.")); + } + else + { + if (!WriteStatusFailure(argv[1], + SERVICE_UPDATER_IDENTITY_ERROR)) + { + LOG_WARN(("Could not write update.status no updater identity.")); + } + return TRUE; + } + + // Check for updater.exe sign problems + BOOL updaterSignProblem = FALSE; +#ifndef DISABLE_UPDATER_AUTHENTICODE_CHECK + updaterSignProblem = !DoesBinaryMatchAllowedCertificates(installDir, + argv[0]); +#endif + + // Only proceed with the update if we have no signing problems + if (!updaterSignProblem) + { + BOOL updateProcessWasStarted = FALSE; + if (StartUpdateProcess(argc, argv, installDir, + updateProcessWasStarted)) + { + LOG(("updater.exe was launched and run successfully!")); + LogFlush(); + + // Don't attempt to update the service when the update is being staged. + if (!IsUpdateBeingStaged(argc, argv)) + { + // We might not execute code after StartServiceUpdate because + // the service installer will stop the service if it is running. + StartServiceUpdate(installDir); + } + } + else + { + result = FALSE; + LOG_WARN(("Error running update process. Updating update.status (%d)", + GetLastError())); + LogFlush(); + + // If the update process was started, then updater.exe is responsible for + // setting the failure code. If it could not be started then we do the + // work. We set an error instead of directly setting status pending + // so that the app.update.service.errors pref can be updated when + // the callback app restarts. + if (!updateProcessWasStarted) + { + if (!WriteStatusFailure(argv[1], + SERVICE_UPDATER_COULD_NOT_BE_STARTED)) + { + LOG_WARN(("Could not write update.status service update failure. (%d)", + GetLastError())); + } + } + } + } + else + { + result = FALSE; + LOG_WARN(("Could not start process due to certificate check error on " + "updater.exe. Updating update.status. (%d)", GetLastError())); + + // When there is a certificate check error on the updater.exe application, + // we want to write out the error. + if (!WriteStatusFailure(argv[1], + SERVICE_UPDATER_SIGN_ERROR)) + { + LOG_WARN(("Could not write pending state to update.status. (%d)", + GetLastError())); + } + } + + return result; +} + +/** + * Obtains the updater path alongside a subdir of the service binary. + * The purpose of this function is to return a path that is likely high + * integrity and therefore more safe to execute code from. + * + * @param serviceUpdaterPath Out parameter for the path where the updater + * should be copied to. + * @return TRUE if a file path was obtained. + */ +BOOL +GetSecureUpdaterPath(WCHAR serviceUpdaterPath[MAX_PATH + 1]) +{ + if (!GetModuleFileNameW(nullptr, serviceUpdaterPath, MAX_PATH)) + { + LOG_WARN(("Could not obtain module filename when attempting to " + "use a secure updater path. (%d)", GetLastError())); + return FALSE; + } + + if (!PathRemoveFileSpecW(serviceUpdaterPath)) + { + LOG_WARN(("Couldn't remove file spec when attempting to use a secure " + "updater path. (%d)", GetLastError())); + return FALSE; + } + + if (!PathAppendSafe(serviceUpdaterPath, L"update")) + { + LOG_WARN(("Couldn't append file spec when attempting to use a secure " + "updater path. (%d)", GetLastError())); + return FALSE; + } + + CreateDirectoryW(serviceUpdaterPath, nullptr); + + if (!PathAppendSafe(serviceUpdaterPath, L"updater.exe")) + { + LOG_WARN(("Couldn't append file spec when attempting to use a secure " + "updater path. (%d)", GetLastError())); + return FALSE; + } + + return TRUE; +} + +/** + * Deletes the passed in updater path and the associated updater.ini file. + * + * @param serviceUpdaterPath The path to delete. + * @return TRUE if a file was deleted. + */ +BOOL +DeleteSecureUpdater(WCHAR serviceUpdaterPath[MAX_PATH + 1]) +{ + BOOL result = FALSE; + if (serviceUpdaterPath[0]) + { + result = DeleteFileW(serviceUpdaterPath); + if (!result && GetLastError() != ERROR_PATH_NOT_FOUND && + GetLastError() != ERROR_FILE_NOT_FOUND) + { + LOG_WARN(("Could not delete service updater path: '%ls'.", + serviceUpdaterPath)); + } + + WCHAR updaterINIPath[MAX_PATH + 1] = { L'\0' }; + if (PathGetSiblingFilePath(updaterINIPath, serviceUpdaterPath, + L"updater.ini")) + { + result = DeleteFileW(updaterINIPath); + if (!result && GetLastError() != ERROR_PATH_NOT_FOUND && + GetLastError() != ERROR_FILE_NOT_FOUND) + { + LOG_WARN(("Could not delete service updater INI path: '%ls'.", + updaterINIPath)); + } + } + } + return result; +} + +/** + * Executes a service command. + * + * @param argc The number of arguments in argv + * @param argv The service command line arguments, argv[0] and argv[1] + * and automatically included by Windows. argv[2] is the + * service command. + * + * @return FALSE if there was an error executing the service command. + */ +BOOL +ExecuteServiceCommand(int argc, LPWSTR *argv) +{ + if (argc < 3) + { + LOG_WARN(("Not enough command line arguments to execute a service command")); + return FALSE; + } + + // The tests work by making sure the log has changed, so we put a + // unique ID in the log. + RPC_WSTR guidString = RPC_WSTR(L""); + GUID guid; + HRESULT hr = CoCreateGuid(&guid); + if (SUCCEEDED(hr)) + { + UuidToString(&guid, &guidString); + } + LOG(("Executing service command %ls, ID: %ls", + argv[2], reinterpret_cast<LPCWSTR>(guidString))); + RpcStringFree(&guidString); + + BOOL result = FALSE; + if (!lstrcmpi(argv[2], L"software-update")) + { + + // Use the passed in command line arguments for the update, except for the + // path to updater.exe. We copy updater.exe to the directory of the + // MozillaMaintenance service so that a low integrity process cannot + // replace the updater.exe at any point and use that for the update. + // It also makes DLL injection attacks harder. + LPWSTR oldUpdaterPath = argv[3]; + WCHAR secureUpdaterPath[MAX_PATH + 1] = { L'\0' }; + result = GetSecureUpdaterPath(secureUpdaterPath); // Does its own logging + if (result) + { + LOG(("Passed in path: '%ls'; Using this path for updating: '%ls'.", + oldUpdaterPath, secureUpdaterPath)); + DeleteSecureUpdater(secureUpdaterPath); + result = CopyFileW(oldUpdaterPath, secureUpdaterPath, FALSE); + } + + if (!result) + { + LOG_WARN(("Could not copy path to secure location. (%d)", + GetLastError())); + if (argc > 4 && !WriteStatusFailure(argv[4], + SERVICE_COULD_NOT_COPY_UPDATER)) + { + LOG_WARN(("Could not write update.status could not copy updater error")); + } + } + else + { + + // We obtained the path and copied it successfully, update the path to + // use for the service update. + argv[3] = secureUpdaterPath; + + WCHAR oldUpdaterINIPath[MAX_PATH + 1] = { L'\0' }; + WCHAR secureUpdaterINIPath[MAX_PATH + 1] = { L'\0' }; + if (PathGetSiblingFilePath(secureUpdaterINIPath, secureUpdaterPath, + L"updater.ini") && + PathGetSiblingFilePath(oldUpdaterINIPath, oldUpdaterPath, + L"updater.ini")) + { + // This is non fatal if it fails there is no real harm + if (!CopyFileW(oldUpdaterINIPath, secureUpdaterINIPath, FALSE)) + { + LOG_WARN(("Could not copy updater.ini from: '%ls' to '%ls'. (%d)", + oldUpdaterINIPath, secureUpdaterINIPath, GetLastError())); + } + } + + result = ProcessSoftwareUpdateCommand(argc - 3, argv + 3); + DeleteSecureUpdater(secureUpdaterPath); + } + + // We might not reach here if the service install succeeded + // because the service self updates itself and the service + // installer will stop the service. + LOG(("Service command %ls complete.", argv[2])); + } + else + { + LOG_WARN(("Service command not recognized: %ls.", argv[2])); + // result is already set to FALSE + } + + LOG(("service command %ls complete with result: %ls.", + argv[1], (result ? L"Success" : L"Failure"))); + return TRUE; +} |