diff options
Diffstat (limited to '')
| -rw-r--r-- | sfx2/source/doc/guisaveas.cxx | 1857 |
1 files changed, 1857 insertions, 0 deletions
diff --git a/sfx2/source/doc/guisaveas.cxx b/sfx2/source/doc/guisaveas.cxx new file mode 100644 index 000000000..23c75f296 --- /dev/null +++ b/sfx2/source/doc/guisaveas.cxx @@ -0,0 +1,1857 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <com/sun/star/ui/dialogs/XExecutableDialog.hpp> +#include <com/sun/star/ui/dialogs/XFilePicker3.hpp> +#include <com/sun/star/ui/dialogs/XFilePickerControlAccess.hpp> +#include <com/sun/star/ui/dialogs/CommonFilePickerElementIds.hpp> +#include <com/sun/star/ui/dialogs/ExtendedFilePickerElementIds.hpp> +#include <com/sun/star/ui/dialogs/TemplateDescription.hpp> +#include <com/sun/star/view/XSelectionSupplier.hpp> +#include <com/sun/star/beans/PropertyExistException.hpp> +#include <com/sun/star/beans/XPropertyAccess.hpp> +#include <com/sun/star/beans/XPropertySet.hpp> +#include <com/sun/star/beans/XPropertyContainer.hpp> +#include <com/sun/star/beans/PropertyAttribute.hpp> +#include <com/sun/star/document/XExporter.hpp> +#include <com/sun/star/document/XDocumentPropertiesSupplier.hpp> +#include <com/sun/star/document/XDocumentProperties.hpp> +#include <com/sun/star/task/ErrorCodeIOException.hpp> +#include <com/sun/star/task/InteractionHandler.hpp> +#include <com/sun/star/util/URLTransformer.hpp> +#include <com/sun/star/util/XURLTransformer.hpp> +#include <com/sun/star/frame/ModuleManager.hpp> +#include <com/sun/star/frame/XStorable.hpp> +#include <com/sun/star/frame/XStorable2.hpp> +#include <com/sun/star/frame/XDispatchProvider.hpp> +#include <com/sun/star/frame/XDispatch.hpp> +#include <com/sun/star/frame/XTitle.hpp> +#include <com/sun/star/util/XModifiable.hpp> +#include <com/sun/star/lang/XMultiServiceFactory.hpp> + +#include <com/sun/star/util/XCloneable.hpp> + +#include <guisaveas.hxx> + +#include <sal/log.hxx> +#include <svl/itemset.hxx> +#include <svl/eitem.hxx> +#include <tools/debug.hxx> +#include <tools/diagnose_ex.h> +#include <tools/urlobj.hxx> +#include <comphelper/processfactory.hxx> +#include <comphelper/propertysequence.hxx> +#include <comphelper/propertyvalue.hxx> +#include <comphelper/sequenceashashmap.hxx> +#include <comphelper/mimeconfighelper.hxx> +#include <comphelper/lok.hxx> +#include <vcl/svapp.hxx> +#include <vcl/weld.hxx> +#include <o3tl/char16_t2wchar_t.hxx> + +#include <sfx2/sfxsids.hrc> +#include <sfx2/strings.hrc> +#include <sfx2/sfxresid.hxx> +#include <sfx2/filedlghelper.hxx> +#include <sfx2/app.hxx> +#include <sfx2/sfxuno.hxx> +#include <alienwarn.hxx> + +#include <memory> +#include <string_view> + +#include <officecfg/Office/Common.hxx> + +#include <vcl/FilterConfigItem.hxx> +#include <com/sun/star/system/SystemShellExecute.hpp> +#include <com/sun/star/system/SystemShellExecuteFlags.hpp> + +#include <osl/file.hxx> + +#ifdef _WIN32 +#include <Shlobj.h> +#ifdef GetTempPath +#undef GetTempPath +#endif +#endif + +// flags that specify requested operation +#define EXPORT_REQUESTED 1 +#define PDFEXPORT_REQUESTED 2 +#define PDFDIRECTEXPORT_REQUESTED 4 +#define WIDEEXPORT_REQUESTED 8 +#define SAVE_REQUESTED 16 +#define SAVEAS_REQUESTED 32 +#define SAVEACOPY_REQUESTED 64 +#define EPUBEXPORT_REQUESTED 128 +#define EPUBDIRECTEXPORT_REQUESTED 256 +#define SAVEASREMOTE_REQUESTED -1 + +// possible statuses of save operation +#define STATUS_NO_ACTION 0 +#define STATUS_SAVE 1 +#define STATUS_SAVEAS 2 +#define STATUS_SAVEAS_STANDARDNAME 3 + +constexpr OUStringLiteral aFilterNameString = u"FilterName"; +constexpr OUStringLiteral aFilterOptionsString = u"FilterOptions"; +constexpr OUStringLiteral aFilterDataString = u"FilterData"; + +using namespace ::com::sun::star; +using namespace css::system; + +namespace { + +sal_uInt16 getSlotIDFromMode( sal_Int16 nStoreMode ) +{ + // This is a temporary hardcoded solution must be removed when + // dialogs do not need parameters in SidSet representation any more + + sal_uInt16 nResult = 0; + if ( nStoreMode == EXPORT_REQUESTED || nStoreMode == ( EXPORT_REQUESTED | SAVEACOPY_REQUESTED | WIDEEXPORT_REQUESTED ) ) + nResult = SID_EXPORTDOC; + else if ( nStoreMode == ( EXPORT_REQUESTED | PDFEXPORT_REQUESTED ) ) + nResult = SID_EXPORTDOCASPDF; + else if ( nStoreMode == ( EXPORT_REQUESTED | EPUBEXPORT_REQUESTED ) ) + nResult = SID_EXPORTDOCASEPUB; + else if ( nStoreMode == ( EXPORT_REQUESTED | PDFEXPORT_REQUESTED | PDFDIRECTEXPORT_REQUESTED ) ) + nResult = SID_DIRECTEXPORTDOCASPDF; + else if ( nStoreMode == ( EXPORT_REQUESTED | EPUBEXPORT_REQUESTED | EPUBDIRECTEXPORT_REQUESTED ) ) + nResult = SID_DIRECTEXPORTDOCASEPUB; + else if ( nStoreMode == SAVEAS_REQUESTED || nStoreMode == ( EXPORT_REQUESTED | WIDEEXPORT_REQUESTED ) ) + nResult = SID_SAVEASDOC; + else if ( nStoreMode == SAVEASREMOTE_REQUESTED ) + nResult = SID_SAVEASREMOTE; + else { + SAL_WARN( "sfx.doc", "Unacceptable slot name is provided!" ); + } + + return nResult; +} + + +sal_Int16 getStoreModeFromSlotName( std::u16string_view aSlotName ) +{ + sal_Int16 nResult = 0; + if ( aSlotName == u"ExportTo" ) + nResult = EXPORT_REQUESTED; + else if ( aSlotName == u"ExportToPDF" ) + nResult = EXPORT_REQUESTED | PDFEXPORT_REQUESTED; + else if ( aSlotName == u"ExportDirectToPDF" ) + nResult = EXPORT_REQUESTED | PDFEXPORT_REQUESTED | PDFDIRECTEXPORT_REQUESTED; + else if ( aSlotName == u"ExportToEPUB" ) + nResult = EXPORT_REQUESTED | EPUBEXPORT_REQUESTED; + else if ( aSlotName == u"ExportDirectToEPUB" ) + nResult = EXPORT_REQUESTED | EPUBEXPORT_REQUESTED | EPUBDIRECTEXPORT_REQUESTED; + else if ( aSlotName == u"Save" ) + nResult = SAVE_REQUESTED; + else if ( aSlotName == u"SaveAs" ) + nResult = SAVEAS_REQUESTED; + else if ( aSlotName == u"SaveAsRemote" ) + nResult = SAVEASREMOTE_REQUESTED; + else + throw task::ErrorCodeIOException( + (OUString::Concat("getStoreModeFromSlotName(\"") + aSlotName + + "): ERRCODE_IO_INVALIDPARAMETER"), + uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_INVALIDPARAMETER) ); + + return nResult; +} + + +SfxFilterFlags getMustFlags( sal_Int16 nStoreMode ) +{ + return ( SfxFilterFlags::EXPORT + | ( ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) ? SfxFilterFlags::NONE : SfxFilterFlags::IMPORT ) ); +} + + +SfxFilterFlags getDontFlags( sal_Int16 nStoreMode ) +{ + return ( SfxFilterFlags::INTERNAL + | SfxFilterFlags::NOTINFILEDLG + | ( ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) ? SfxFilterFlags::IMPORT : SfxFilterFlags::NONE ) ); +} + + + + +class DocumentSettingsGuard +{ + uno::Reference< beans::XPropertySet > m_xDocumentSettings; + bool m_bPreserveReadOnly; + bool m_bReadOnlySupported; + + bool m_bRestoreSettings; +public: + DocumentSettingsGuard( const uno::Reference< frame::XModel >& xModel, bool bReadOnly, bool bRestore ) + : m_bPreserveReadOnly( false ) + , m_bReadOnlySupported( false ) + , m_bRestoreSettings( bRestore ) + { + try + { + uno::Reference< lang::XMultiServiceFactory > xDocSettingsSupplier( xModel, uno::UNO_QUERY_THROW ); + m_xDocumentSettings.set( + xDocSettingsSupplier->createInstance( "com.sun.star.document.Settings" ), + uno::UNO_QUERY_THROW ); + + try + { + OUString aLoadReadonlyString( "LoadReadonly" ); + m_xDocumentSettings->getPropertyValue( aLoadReadonlyString ) >>= m_bPreserveReadOnly; + m_xDocumentSettings->setPropertyValue( aLoadReadonlyString, uno::Any( bReadOnly ) ); + m_bReadOnlySupported = true; + } + catch( const uno::Exception& ) + {} + } + catch( const uno::Exception& ) + {} + + if ( bReadOnly && !m_bReadOnlySupported ) + throw uno::RuntimeException(); // the user could provide the data, so it must be stored + } + + ~DocumentSettingsGuard() + { + if ( m_bRestoreSettings ) + { + try + { + if ( m_bReadOnlySupported ) + m_xDocumentSettings->setPropertyValue( "LoadReadonly", uno::Any( m_bPreserveReadOnly ) ); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION( "sfx.doc", "" ); + } + } + } +}; +} // anonymous namespace + + + +class ModelData_Impl +{ + SfxStoringHelper* m_pOwner; + uno::Reference< frame::XModel > m_xModel; + uno::Reference< frame::XStorable > m_xStorable; + uno::Reference< frame::XStorable2 > m_xStorable2; + + OUString m_aModuleName; + std::unique_ptr<::comphelper::SequenceAsHashMap> m_pDocumentPropsHM; + std::unique_ptr<::comphelper::SequenceAsHashMap> m_pModulePropsHM; + + ::comphelper::SequenceAsHashMap m_aMediaDescrHM; + + bool m_bRecommendReadOnly; + +public: + ModelData_Impl( SfxStoringHelper& aOwner, + const uno::Reference< frame::XModel >& xModel, + const uno::Sequence< beans::PropertyValue >& aMediaDescr ); + + ~ModelData_Impl(); + + void FreeDocumentProps(); + + uno::Reference< frame::XModel > const & GetModel() const; + uno::Reference< frame::XStorable > const & GetStorable(); + uno::Reference< frame::XStorable2 > const & GetStorable2(); + + ::comphelper::SequenceAsHashMap& GetMediaDescr() { return m_aMediaDescrHM; } + + bool IsRecommendReadOnly() const { return m_bRecommendReadOnly; } + + const ::comphelper::SequenceAsHashMap& GetDocProps(); + + OUString const & GetModuleName(); + const ::comphelper::SequenceAsHashMap& GetModuleProps(); + + void CheckInteractionHandler(); + + + OUString GetDocServiceName(); + uno::Sequence< beans::PropertyValue > GetDocServiceDefaultFilterCheckFlags( SfxFilterFlags nMust, SfxFilterFlags nDont ); + uno::Sequence< beans::PropertyValue > GetDocServiceAnyFilter( SfxFilterFlags nMust, SfxFilterFlags nDont ); + uno::Sequence< beans::PropertyValue > GetPreselectedFilter_Impl( sal_Int16 nStoreMode ); + uno::Sequence< beans::PropertyValue > GetDocServiceDefaultFilter(); + + bool ExecuteFilterDialog_Impl( const OUString& aFilterName ); + + sal_Int8 CheckSaveAcceptable( sal_Int8 nCurStatus ); + sal_Int8 CheckStateForSave(); + + sal_Int8 CheckFilter( const OUString& ); + + bool CheckFilterOptionsDialogExistence(); + + bool OutputFileDialog( sal_Int16 nStoreMode, + const ::comphelper::SequenceAsHashMap& aPreselectedFilterPropsHM, + bool bSetStandardName, + OUString& aSuggestedName, + bool bPreselectPassword, + OUString& aSuggestedDir, + sal_Int16 nDialog, + const OUString& rStandardDir, + const css::uno::Sequence< OUString >& rDenyList + ); + + bool ShowDocumentInfoDialog(); + + static OUString GetRecommendedExtension( const OUString& aTypeName ); + OUString GetRecommendedDir( const OUString& aSuggestedDir ); + OUString GetRecommendedName( const OUString& aSuggestedName, + const OUString& aTypeName ); + +}; + + +ModelData_Impl::ModelData_Impl( SfxStoringHelper& aOwner, + const uno::Reference< frame::XModel >& xModel, + const uno::Sequence< beans::PropertyValue >& aMediaDescr ) +: m_pOwner( &aOwner ) +, m_xModel( xModel ) +, m_aMediaDescrHM( aMediaDescr ) +, m_bRecommendReadOnly( false ) +{ + CheckInteractionHandler(); +} + + +ModelData_Impl::~ModelData_Impl() +{ + FreeDocumentProps(); + m_pDocumentPropsHM.reset(); + m_pModulePropsHM.reset(); +} + + +void ModelData_Impl::FreeDocumentProps() +{ + m_pDocumentPropsHM.reset(); +} + + +uno::Reference< frame::XModel > const & ModelData_Impl::GetModel() const +{ + if ( !m_xModel.is() ) + throw uno::RuntimeException(); + + return m_xModel; +} + + +uno::Reference< frame::XStorable > const & ModelData_Impl::GetStorable() +{ + if ( !m_xStorable.is() ) + { + m_xStorable.set( m_xModel, uno::UNO_QUERY_THROW ); + } + + return m_xStorable; +} + + +uno::Reference< frame::XStorable2 > const & ModelData_Impl::GetStorable2() +{ + if ( !m_xStorable2.is() ) + { + m_xStorable2.set( m_xModel, uno::UNO_QUERY_THROW ); + } + + return m_xStorable2; +} + + +const ::comphelper::SequenceAsHashMap& ModelData_Impl::GetDocProps() +{ + if ( !m_pDocumentPropsHM ) + m_pDocumentPropsHM.reset( new ::comphelper::SequenceAsHashMap( GetModel()->getArgs() ) ); + + return *m_pDocumentPropsHM; +} + + +OUString const & ModelData_Impl::GetModuleName() +{ + if ( m_aModuleName.isEmpty() ) + { + m_aModuleName = m_pOwner->GetModuleManager()->identify( + uno::Reference< uno::XInterface >( m_xModel, uno::UNO_QUERY ) ); + if ( m_aModuleName.isEmpty() ) + throw uno::RuntimeException(); // TODO: + } + return m_aModuleName; +} + + +const ::comphelper::SequenceAsHashMap& ModelData_Impl::GetModuleProps() +{ + if ( !m_pModulePropsHM ) + { + uno::Sequence< beans::PropertyValue > aModuleProps; + m_pOwner->GetModuleManager()->getByName( GetModuleName() ) >>= aModuleProps; + if ( !aModuleProps.hasElements() ) + throw uno::RuntimeException(); // TODO; + m_pModulePropsHM.reset( new ::comphelper::SequenceAsHashMap( aModuleProps ) ); + } + + return *m_pModulePropsHM; +} + + +OUString ModelData_Impl::GetDocServiceName() +{ + return GetModuleProps().getUnpackedValueOrDefault("ooSetupFactoryDocumentService", OUString()); +} + + +void ModelData_Impl::CheckInteractionHandler() +{ + const OUString sInteractionHandler {"InteractionHandler"}; + ::comphelper::SequenceAsHashMap::const_iterator aInteractIter = + m_aMediaDescrHM.find( sInteractionHandler ); + + if ( aInteractIter == m_aMediaDescrHM.end() ) + { + try { + m_aMediaDescrHM[ sInteractionHandler ] + <<= task::InteractionHandler::createWithParent( comphelper::getProcessComponentContext(), nullptr); + } + catch( const uno::Exception& ) + { + } + } + else + { + uno::Reference< task::XInteractionHandler > xInteract; + DBG_ASSERT( ( aInteractIter->second >>= xInteract ) && xInteract.is(), "Broken interaction handler is provided!\n" ); + } +} + + +uno::Sequence< beans::PropertyValue > ModelData_Impl::GetDocServiceDefaultFilter() +{ + uno::Sequence< beans::PropertyValue > aProps; + + const OUString aFilterName = GetModuleProps().getUnpackedValueOrDefault( "ooSetupFactoryDefaultFilter", OUString() ); + + m_pOwner->GetFilterConfiguration()->getByName( aFilterName ) >>= aProps; + + return aProps; +} + + +uno::Sequence< beans::PropertyValue > ModelData_Impl::GetDocServiceDefaultFilterCheckFlags( SfxFilterFlags nMust, + SfxFilterFlags nDont ) +{ + uno::Sequence< beans::PropertyValue > aFilterProps; + uno::Sequence< beans::PropertyValue > aProps = GetDocServiceDefaultFilter(); + if ( aProps.hasElements() ) + { + ::comphelper::SequenceAsHashMap aFiltHM( aProps ); + SfxFilterFlags nFlags = static_cast<SfxFilterFlags>(aFiltHM.getUnpackedValueOrDefault("Flags", + sal_Int32(0) )); + if ( ( ( nFlags & nMust ) == nMust ) && !( nFlags & nDont ) ) + aFilterProps = aProps; + } + + return aFilterProps; +} + + +uno::Sequence< beans::PropertyValue > ModelData_Impl::GetDocServiceAnyFilter( SfxFilterFlags nMust, SfxFilterFlags nDont ) +{ + uno::Sequence< beans::NamedValue > aSearchRequest { { "DocumentService", css::uno::Any(GetDocServiceName()) } }; + + return ::comphelper::MimeConfigurationHelper::SearchForFilter( m_pOwner->GetFilterQuery(), aSearchRequest, nMust, nDont ); +} + + +uno::Sequence< beans::PropertyValue > ModelData_Impl::GetPreselectedFilter_Impl( sal_Int16 nStoreMode ) +{ + if ( nStoreMode == SAVEASREMOTE_REQUESTED ) + nStoreMode = SAVEAS_REQUESTED; + + uno::Sequence< beans::PropertyValue > aFilterProps; + + SfxFilterFlags nMust = getMustFlags( nStoreMode ); + SfxFilterFlags nDont = getDontFlags( nStoreMode ); + + if ( ( nStoreMode != SAVEASREMOTE_REQUESTED ) && ( nStoreMode & PDFEXPORT_REQUESTED ) ) + { + // Preselect PDF-Filter for EXPORT + uno::Sequence< beans::NamedValue > aSearchRequest + { + { "Type", css::uno::Any(OUString("pdf_Portable_Document_Format")) }, + { "DocumentService", css::uno::Any(GetDocServiceName()) } + }; + + aFilterProps = ::comphelper::MimeConfigurationHelper::SearchForFilter( m_pOwner->GetFilterQuery(), aSearchRequest, nMust, nDont ); + } + else if ( ( nStoreMode != SAVEASREMOTE_REQUESTED ) && ( nStoreMode & EPUBEXPORT_REQUESTED ) ) + { + // Preselect EPUB filter for export. + uno::Sequence<beans::NamedValue> aSearchRequest + { + { "Type", css::uno::Any(OUString("writer_EPUB_Document")) }, + { "DocumentService", css::uno::Any(GetDocServiceName()) } + }; + + aFilterProps = ::comphelper::MimeConfigurationHelper::SearchForFilter( m_pOwner->GetFilterQuery(), aSearchRequest, nMust, nDont ); + } + else + { + aFilterProps = GetDocServiceDefaultFilterCheckFlags( nMust, nDont ); + + if ( !aFilterProps.hasElements() ) + { + // the default filter was not found, use just the first acceptable one + aFilterProps = GetDocServiceAnyFilter( nMust, nDont ); + } + } + + return aFilterProps; +} + + +bool ModelData_Impl::ExecuteFilterDialog_Impl( const OUString& aFilterName ) +{ + bool bDialogUsed = false; + + try { + uno::Sequence < beans::PropertyValue > aProps; + uno::Any aAny = m_pOwner->GetFilterConfiguration()->getByName( aFilterName ); + if ( aAny >>= aProps ) + { + auto pProp = std::find_if(std::cbegin(aProps), std::cend(aProps), + [](const beans::PropertyValue& rProp) { return rProp.Name == "UIComponent"; }); + if (pProp != std::cend(aProps)) + { + OUString aServiceName; + pProp->Value >>= aServiceName; + if( !aServiceName.isEmpty() ) + { + uno::Sequence<uno::Any> aDialogArgs(comphelper::InitAnyPropertySequence( + { + {"ParentWindow", uno::Any(SfxStoringHelper::GetModelXWindow(m_xModel))}, + })); + + uno::Reference< ui::dialogs::XExecutableDialog > xFilterDialog( + comphelper::getProcessServiceFactory()->createInstanceWithArguments(aServiceName, aDialogArgs), uno::UNO_QUERY ); + uno::Reference< beans::XPropertyAccess > xFilterProperties( xFilterDialog, uno::UNO_QUERY ); + + if( xFilterDialog.is() && xFilterProperties.is() ) + { + bDialogUsed = true; + + uno::Reference< document::XExporter > xExporter( xFilterDialog, uno::UNO_QUERY ); + if( xExporter.is() ) + xExporter->setSourceDocument( GetModel() ); + + uno::Sequence< beans::PropertyValue > aPropsForDialog; + GetMediaDescr() >> aPropsForDialog; + xFilterProperties->setPropertyValues( aPropsForDialog ); + + if( !xFilterDialog->execute() ) + { + throw task::ErrorCodeIOException( + ("ModelData_Impl::ExecuteFilterDialog_Impl:" + " ERRCODE_IO_ABORT"), + uno::Reference< uno::XInterface >(), + sal_uInt32(ERRCODE_IO_ABORT)); + } + + const uno::Sequence< beans::PropertyValue > aPropsFromDialog = + xFilterProperties->getPropertyValues(); + for ( const auto& rProp : aPropsFromDialog ) + GetMediaDescr()[rProp.Name] = rProp.Value; + } + } + } + } + } + catch( const container::NoSuchElementException& e ) + { + // the filter name is unknown + throw task::ErrorCodeIOException( + ("ModelData_Impl::ExecuteFilterDialog_Impl: NoSuchElementException" + " \"" + e.Message + "\": ERRCODE_IO_ABORT"), + uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_INVALIDPARAMETER)); + } + catch( const task::ErrorCodeIOException& ) + { + throw; + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("sfx.doc", "ignoring"); + } + + return bDialogUsed; +} + + +sal_Int8 ModelData_Impl::CheckSaveAcceptable( sal_Int8 nCurStatus ) +{ + sal_Int8 nResult = nCurStatus; + + if ( nResult != STATUS_NO_ACTION && GetStorable()->hasLocation() ) + { + // the saving is acceptable + // in case the configuration entry is not set or set to false + // or in case of version creation + if ( officecfg::Office::Common::Save::Document::AlwaysSaveAs::get() + && GetMediaDescr().find( OUString("VersionComment") ) == GetMediaDescr().end() ) + { + // notify the user that SaveAs is going to be done + std::unique_ptr<weld::MessageDialog> xMessageBox(Application::CreateMessageDialog(SfxStoringHelper::GetModelWindow(m_xModel), + VclMessageType::Question, VclButtonsType::OkCancel, SfxResId(STR_NEW_FILENAME_SAVE))); + if (xMessageBox->run() == RET_OK) + nResult = STATUS_SAVEAS; + else + nResult = STATUS_NO_ACTION; + } + } + + return nResult; +} + + +sal_Int8 ModelData_Impl::CheckStateForSave() +{ + // if the document is readonly or a new one a SaveAs operation must be used + if ( !GetStorable()->hasLocation() || GetStorable()->isReadonly() ) + return STATUS_SAVEAS; + + // check acceptable entries for media descriptor + ::comphelper::SequenceAsHashMap aAcceptedArgs; + + static const OUStringLiteral aVersionCommentString(u"VersionComment"); + static const OUStringLiteral aAuthorString(u"Author"); + static const OUStringLiteral aDontTerminateEdit(u"DontTerminateEdit"); + static const OUStringLiteral aInteractionHandlerString(u"InteractionHandler"); + static const OUStringLiteral aStatusIndicatorString(u"StatusIndicator"); + static const OUStringLiteral aFailOnWarningString(u"FailOnWarning"); + static const OUStringLiteral aNoFileSync(u"NoFileSync"); + + if ( GetMediaDescr().find( aVersionCommentString ) != GetMediaDescr().end() ) + aAcceptedArgs[ aVersionCommentString ] = GetMediaDescr()[ aVersionCommentString ]; + if ( GetMediaDescr().find( aAuthorString ) != GetMediaDescr().end() ) + aAcceptedArgs[ aAuthorString ] = GetMediaDescr()[ aAuthorString ]; + if ( GetMediaDescr().find( aDontTerminateEdit ) != GetMediaDescr().end() ) + aAcceptedArgs[ aDontTerminateEdit ] = GetMediaDescr()[ aDontTerminateEdit ]; + if ( GetMediaDescr().find( aInteractionHandlerString ) != GetMediaDescr().end() ) + aAcceptedArgs[ aInteractionHandlerString ] = GetMediaDescr()[ aInteractionHandlerString ]; + if ( GetMediaDescr().find( aStatusIndicatorString ) != GetMediaDescr().end() ) + aAcceptedArgs[ aStatusIndicatorString ] = GetMediaDescr()[ aStatusIndicatorString ]; + if ( GetMediaDescr().find( aFailOnWarningString ) != GetMediaDescr().end() ) + aAcceptedArgs[ aFailOnWarningString ] = GetMediaDescr()[ aFailOnWarningString ]; + if (GetMediaDescr().find(aNoFileSync) != GetMediaDescr().end()) + aAcceptedArgs[aNoFileSync] = GetMediaDescr()[aNoFileSync]; + + // remove unacceptable entry if there is any + DBG_ASSERT( GetMediaDescr().size() == aAcceptedArgs.size(), + "Unacceptable parameters are provided in Save request!\n" ); + if ( GetMediaDescr().size() != aAcceptedArgs.size() ) + GetMediaDescr() = aAcceptedArgs; + + // check that the old filter is acceptable + return CheckFilter( GetDocProps().getUnpackedValueOrDefault(aFilterNameString, OUString()) ); +} + +sal_Int8 ModelData_Impl::CheckFilter( const OUString& aFilterName ) +{ + ::comphelper::SequenceAsHashMap aFiltPropsHM; + SfxFilterFlags nFiltFlags = SfxFilterFlags::NONE; + if ( !aFilterName.isEmpty() ) + { + // get properties of filter + uno::Sequence< beans::PropertyValue > aFilterProps; + m_pOwner->GetFilterConfiguration()->getByName( aFilterName ) >>= aFilterProps; + + aFiltPropsHM = ::comphelper::SequenceAsHashMap( aFilterProps ); + nFiltFlags = static_cast<SfxFilterFlags>(aFiltPropsHM.getUnpackedValueOrDefault("Flags", sal_Int32(0) )); + } + + // only a temporary solution until default filter retrieving feature is implemented + // then GetDocServiceDefaultFilter() must be used + ::comphelper::SequenceAsHashMap aDefFiltPropsHM = GetDocServiceDefaultFilterCheckFlags( SfxFilterFlags::IMPORT | SfxFilterFlags::EXPORT, SfxFilterFlags::NONE ); + SfxFilterFlags nDefFiltFlags = static_cast<SfxFilterFlags>(aDefFiltPropsHM.getUnpackedValueOrDefault("Flags", sal_Int32(0) )); + + bool bAsk = false; + + // if the old filter is not acceptable + // and there is no default filter or it is not acceptable for requested parameters then proceed with saveAs + if ( ( aFiltPropsHM.empty() || !( nFiltFlags & SfxFilterFlags::EXPORT ) ) + && ( aDefFiltPropsHM.empty() || !( nDefFiltFlags & SfxFilterFlags::EXPORT ) || nDefFiltFlags & SfxFilterFlags::INTERNAL ) ) + return STATUS_SAVEAS; + + // so at this point there is either an acceptable old filter or default one + if ( aFiltPropsHM.empty() || !( nFiltFlags & SfxFilterFlags::EXPORT ) ) + { + // so the default filter must be acceptable + return STATUS_SAVEAS_STANDARDNAME; + } + else if ( ( !( nFiltFlags & SfxFilterFlags::OWN ) || ( nFiltFlags & SfxFilterFlags::ALIEN ) ) + && !aDefFiltPropsHM.empty() + && ( nDefFiltFlags & SfxFilterFlags::EXPORT ) && !( nDefFiltFlags & SfxFilterFlags::INTERNAL )) + { + bAsk = true; + } + + // check if EncryptionData supports this output format + { + OUString aSupportedFilters; + const ::comphelper::SequenceAsHashMap& rDocumentProperties = GetDocProps(); + const css::uno::Sequence<css::beans::NamedValue> aEncryptionData = rDocumentProperties.getUnpackedValueOrDefault("EncryptionData", css::uno::Sequence<css::beans::NamedValue>()); + if (aEncryptionData != css::uno::Sequence<css::beans::NamedValue>()) + { + for (const css::beans::NamedValue& aNamedValue : aEncryptionData) + { + if (aNamedValue.Name == "SupportedFilters") + { + aNamedValue.Value >>= aSupportedFilters; + } + } + } + + // if 'SupportedFilters' is empty assume that all filters are supported. + if (!aSupportedFilters.isEmpty()) + { + const OUString aSelectedFilter = aFiltPropsHM.getUnpackedValueOrDefault("UIName", OUString()); + + aSupportedFilters = ";" + aSupportedFilters + ";"; + const OUString aSearchToken = ";" + aSelectedFilter + ";"; + bAsk = (aSupportedFilters.indexOf(aSearchToken) < 0); + } + } + + if (bAsk) + { + // the default filter is acceptable and the old filter is alien one + // so ask to make a saveAs operation + const OUString aUIName = aFiltPropsHM.getUnpackedValueOrDefault("UIName", OUString() ); + const OUString aDefUIName = aDefFiltPropsHM.getUnpackedValueOrDefault("UIName", OUString() ); + const OUString aPreusedFilterName = GetDocProps().getUnpackedValueOrDefault("PreusedFilterName", OUString() ); + const OUString aDefType = aDefFiltPropsHM.getUnpackedValueOrDefault( "Type", OUString() ); + const OUString aDefExtension = GetRecommendedExtension( aDefType ); + + if ( aPreusedFilterName != aFilterName && aUIName != aDefUIName ) + { + if ( !SfxStoringHelper::WarnUnacceptableFormat( GetModel(), aUIName, aDefExtension, + static_cast<bool>( nDefFiltFlags & SfxFilterFlags::ALIEN ) ) ) + return STATUS_SAVEAS_STANDARDNAME; + } + } + + return STATUS_SAVE; +} + + +bool ModelData_Impl::CheckFilterOptionsDialogExistence() +{ + uno::Sequence< beans::NamedValue > aSearchRequest { { "DocumentService", css::uno::Any(GetDocServiceName()) } }; + + uno::Reference< container::XEnumeration > xFilterEnum = + m_pOwner->GetFilterQuery()->createSubSetEnumerationByProperties( aSearchRequest ); + + while ( xFilterEnum->hasMoreElements() ) + { + uno::Sequence< beans::PropertyValue > aProps; + if ( xFilterEnum->nextElement() >>= aProps ) + { + ::comphelper::SequenceAsHashMap aPropsHM( aProps ); + if ( !aPropsHM.getUnpackedValueOrDefault("UIComponent", OUString()).isEmpty() ) + return true; + } + } + + return false; +} + + +bool ModelData_Impl::OutputFileDialog( sal_Int16 nStoreMode, + const ::comphelper::SequenceAsHashMap& aPreselectedFilterPropsHM, + bool bSetStandardName, + OUString& aSuggestedName, + bool bPreselectPassword, + OUString& aSuggestedDir, + sal_Int16 nDialog, + const OUString& rStandardDir, + const css::uno::Sequence< OUString >& rDenyList) +{ + if ( nStoreMode == SAVEASREMOTE_REQUESTED ) + nStoreMode = SAVEAS_REQUESTED; + + bool bUseFilterOptions = false; + + ::comphelper::SequenceAsHashMap::const_iterator aOverwriteIter = + GetMediaDescr().find( OUString("Overwrite") ); + + // the file name must be specified if overwrite option is set + if ( aOverwriteIter != GetMediaDescr().end() ) + throw task::ErrorCodeIOException( + "ModelData_Impl::OutputFileDialog: ERRCODE_IO_INVALIDPARAMETER", + uno::Reference< uno::XInterface >(), + sal_uInt32(ERRCODE_IO_INVALIDPARAMETER)); + + // no target file name is specified + // we need to show the file dialog + + // check if we have a filter which allows for filter options, so we need a corresponding checkbox in the dialog + bool bAllowOptions = false; + + // in case of Export, filter options dialog is used if available + if( !( nStoreMode & EXPORT_REQUESTED ) || ( nStoreMode & WIDEEXPORT_REQUESTED ) ) + bAllowOptions = CheckFilterOptionsDialogExistence(); + + // get the filename by dialog ... + // create the file dialog + sal_Int16 aDialogMode = bAllowOptions + ? css::ui::dialogs::TemplateDescription::FILESAVE_AUTOEXTENSION_PASSWORD_FILTEROPTIONS + : css::ui::dialogs::TemplateDescription::FILESAVE_AUTOEXTENSION_PASSWORD; + FileDialogFlags aDialogFlags = FileDialogFlags::NONE; + + if( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) + { + if ( (nStoreMode & PDFEXPORT_REQUESTED) || (nStoreMode & EPUBEXPORT_REQUESTED) ) + aDialogMode = css::ui::dialogs::TemplateDescription:: + FILESAVE_AUTOEXTENSION; + else + aDialogMode = css::ui::dialogs::TemplateDescription:: + FILESAVE_AUTOEXTENSION_SELECTION; + aDialogFlags = FileDialogFlags::Export; + } + + if( ( nStoreMode & EXPORT_REQUESTED ) && ( nStoreMode & SAVEACOPY_REQUESTED ) && ( nStoreMode & WIDEEXPORT_REQUESTED ) ) + { + aDialogFlags = FileDialogFlags::SaveACopy; + } + + std::unique_ptr<sfx2::FileDialogHelper> pFileDlg; + + const OUString aDocServiceName {GetDocServiceName()}; + DBG_ASSERT( !aDocServiceName.isEmpty(), "No document service for this module set!" ); + + SfxFilterFlags nMust = getMustFlags( nStoreMode ); + SfxFilterFlags nDont = getDontFlags( nStoreMode ); + weld::Window* pFrameWin = SfxStoringHelper::GetModelWindow(m_xModel); + if ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) + { + if ( ( nStoreMode & PDFEXPORT_REQUESTED ) && !aPreselectedFilterPropsHM.empty() ) + { + // this is a PDF export + // the filter options has been shown already + const OUString aFilterUIName = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "UIName", OUString() ); + pFileDlg.reset(new sfx2::FileDialogHelper( aDialogMode, aDialogFlags, aFilterUIName, u"pdf", rStandardDir, rDenyList, pFrameWin )); + pFileDlg->SetCurrentFilter( aFilterUIName ); + } + else if ((nStoreMode & EPUBEXPORT_REQUESTED) && !aPreselectedFilterPropsHM.empty()) + { + // This is an EPUB export, the filter options has been shown already. + const OUString aFilterUIName = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "UIName", OUString() ); + pFileDlg.reset(new sfx2::FileDialogHelper(aDialogMode, aDialogFlags, aFilterUIName, u"epub", rStandardDir, rDenyList, pFrameWin)); + pFileDlg->SetCurrentFilter(aFilterUIName); + } + else + { + // This is the normal dialog + pFileDlg.reset(new sfx2::FileDialogHelper( aDialogMode, aDialogFlags, aDocServiceName, nDialog, nMust, nDont, rStandardDir, rDenyList, pFrameWin )); + } + + sfx2::FileDialogHelper::Context eCtxt = sfx2::FileDialogHelper::UnknownContext; + if ( aDocServiceName == "com.sun.star.drawing.DrawingDocument" ) + eCtxt = sfx2::FileDialogHelper::DrawExport; + else if ( aDocServiceName == "com.sun.star.presentation.PresentationDocument" ) + eCtxt = sfx2::FileDialogHelper::ImpressExport; + else if ( aDocServiceName == "com.sun.star.text.TextDocument" ) + eCtxt = sfx2::FileDialogHelper::WriterExport; + else if ( aDocServiceName == "com.sun.star.sheet.SpreadsheetDocument" ) + eCtxt = sfx2::FileDialogHelper::CalcExport; + + if ( eCtxt != sfx2::FileDialogHelper::UnknownContext ) + pFileDlg->SetContext( eCtxt ); + + pFileDlg->CreateMatcher( aDocServiceName ); + + uno::Reference< ui::dialogs::XFilePicker3 > xFilePicker = pFileDlg->GetFilePicker(); + uno::Reference< ui::dialogs::XFilePickerControlAccess > xControlAccess( xFilePicker, uno::UNO_QUERY ); + + if ( xControlAccess.is() ) + { + xControlAccess->setLabel( ui::dialogs::CommonFilePickerElementIds::PUSHBUTTON_OK, SfxResId(STR_EXPORTBUTTON) ); + xControlAccess->setLabel( ui::dialogs::CommonFilePickerElementIds::LISTBOX_FILTER_LABEL, SfxResId(STR_LABEL_FILEFORMAT) ); + } + } + else + { + // This is the normal save as dialog + pFileDlg.reset(new sfx2::FileDialogHelper( aDialogMode, aDialogFlags, aDocServiceName, nDialog, + nMust, nDont, rStandardDir, rDenyList, pFrameWin )); + pFileDlg->CreateMatcher( aDocServiceName ); + + sfx2::FileDialogHelper::Context eCtxt = sfx2::FileDialogHelper::UnknownContext; + if ( aDocServiceName == "com.sun.star.drawing.DrawingDocument" ) + eCtxt = sfx2::FileDialogHelper::DrawSaveAs; + else if ( aDocServiceName == "com.sun.star.presentation.PresentationDocument" ) + eCtxt = sfx2::FileDialogHelper::ImpressSaveAs; + else if ( aDocServiceName == "com.sun.star.text.TextDocument" ) + eCtxt = sfx2::FileDialogHelper::WriterSaveAs; + else if ( aDocServiceName == "com.sun.star.sheet.SpreadsheetDocument" ) + eCtxt = sfx2::FileDialogHelper::CalcSaveAs; + + if ( eCtxt != sfx2::FileDialogHelper::UnknownContext ) + pFileDlg->SetContext( eCtxt ); + } + + OUString aAdjustToType; + + const OUString sFilterNameString(aFilterNameString); + + if ( ( nStoreMode & EXPORT_REQUESTED ) && !( nStoreMode & WIDEEXPORT_REQUESTED ) ) + { + // it is export, set the preselected filter + pFileDlg->SetCurrentFilter( aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "UIName", OUString() ) ); + aAdjustToType = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "Type", OUString() ); + } + // it is no export, bSetStandardName == true means that user agreed to store document in the default (default default ;-)) format + else if ( bSetStandardName || GetStorable()->hasLocation() ) + { + uno::Sequence< beans::PropertyValue > aOldFilterProps; + const OUString aOldFilterName = GetDocProps().getUnpackedValueOrDefault( sFilterNameString, OUString() ); + + if ( !aOldFilterName.isEmpty() ) + m_pOwner->GetFilterConfiguration()->getByName( aOldFilterName ) >>= aOldFilterProps; + + ::comphelper::SequenceAsHashMap aOldFiltPropsHM( aOldFilterProps ); + SfxFilterFlags nOldFiltFlags = static_cast<SfxFilterFlags>(aOldFiltPropsHM.getUnpackedValueOrDefault("Flags", sal_Int32(0) )); + + if ( bSetStandardName || ( nOldFiltFlags & nMust ) != nMust || bool(nOldFiltFlags & nDont) ) + { + // the suggested type will be changed, the extension should be adjusted + aAdjustToType = aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "Type", OUString() ); + pFileDlg->SetCurrentFilter( aPreselectedFilterPropsHM.getUnpackedValueOrDefault( "UIName", OUString() ) ); + } + else + { + pFileDlg->SetCurrentFilter( aOldFiltPropsHM.getUnpackedValueOrDefault( + "UIName", + OUString() ) ); + } + } + + const OUString aRecommendedDir {GetRecommendedDir( aSuggestedDir )}; + if ( !aRecommendedDir.isEmpty() ) + pFileDlg->SetDisplayFolder( aRecommendedDir ); + const OUString aRecommendedName {GetRecommendedName( aSuggestedName, aAdjustToType )}; + if ( !aRecommendedName.isEmpty() ) + pFileDlg->SetFileName( aRecommendedName ); + + uno::Reference < view::XSelectionSupplier > xSel( GetModel()->getCurrentController(), uno::UNO_QUERY ); + if ( xSel.is() && xSel->getSelection().hasValue() ) + GetMediaDescr()[OUString("SelectionOnly")] <<= true; + + // This is a temporary hardcoded solution must be removed when + // dialogs do not need parameters in SidSet representation any more + sal_uInt16 nSlotID = getSlotIDFromMode( nStoreMode ); + if ( !nSlotID ) + throw lang::IllegalArgumentException(); // TODO: + + // generate SidSet from MediaDescriptor and provide it into FileDialog + // than merge changed SidSet back + std::optional<SfxAllItemSet> pDialogParams( SfxGetpApp()->GetPool() ); + TransformParameters( nSlotID, + GetMediaDescr().getAsConstPropertyValueList(), + *pDialogParams ); + + if ( bPreselectPassword && !pDialogParams->HasItem( SID_ENCRYPTIONDATA ) ) + { + // the file dialog preselects the password checkbox if the provided mediadescriptor has encryption data entry + // after dialog execution the password interaction flag will be either removed or not + pDialogParams->Put( SfxBoolItem( SID_PASSWORDINTERACTION, true ) ); + } + + // aFilterName is a pure output parameter, pDialogParams is an in/out parameter + OUString aFilterName; + if ( pFileDlg->Execute( pDialogParams, aFilterName ) != ERRCODE_NONE ) + { + throw task::ErrorCodeIOException( + "ModelData_Impl::OutputFileDialog: ERRCODE_IO_ABORT", + uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT)); + } + + // the following two arguments can not be converted in MediaDescriptor, + // so they should be removed from the ItemSet after retrieving + const SfxBoolItem* pRecommendReadOnly = SfxItemSet::GetItem<SfxBoolItem>(&*pDialogParams, SID_RECOMMENDREADONLY, false); + m_bRecommendReadOnly = ( pRecommendReadOnly && pRecommendReadOnly->GetValue() ); + pDialogParams->ClearItem( SID_RECOMMENDREADONLY ); + + uno::Sequence< beans::PropertyValue > aPropsFromDialog; + TransformItems( nSlotID, *pDialogParams, aPropsFromDialog ); + GetMediaDescr() << aPropsFromDialog; + + // get the path from the dialog + INetURLObject aURL( pFileDlg->GetPath() ); + // the path should be provided outside since it might be used for further calls to the dialog + aSuggestedName = aURL.GetLastName(INetURLObject::DecodeMechanism::WithCharset); + aSuggestedDir = pFileDlg->GetDisplayDirectory(); + + // old filter options should be cleared in case different filter is used + + const OUString aFilterFromMediaDescr = GetMediaDescr().getUnpackedValueOrDefault( sFilterNameString, OUString() ); + const OUString aOldFilterName = GetDocProps().getUnpackedValueOrDefault( sFilterNameString, OUString() ); + + const OUString sFilterOptionsString(aFilterOptionsString); + const OUString sFilterDataString(aFilterDataString); + + if ( aFilterName == aFilterFromMediaDescr ) + { + // preserve current settings if any + // if there no current settings and the name is the same + // as old filter name use old filter settings + + if ( aFilterFromMediaDescr == aOldFilterName ) + { + ::comphelper::SequenceAsHashMap::const_iterator aIter = + GetDocProps().find( sFilterOptionsString ); + if ( aIter != GetDocProps().end() + && GetMediaDescr().find( sFilterOptionsString ) == GetMediaDescr().end() ) + GetMediaDescr()[aIter->first] = aIter->second; + + aIter = GetDocProps().find( sFilterDataString ); + if ( aIter != GetDocProps().end() + && GetMediaDescr().find( sFilterDataString ) == GetMediaDescr().end() ) + GetMediaDescr()[aIter->first] = aIter->second; + } + } + else + { + GetMediaDescr().erase( sFilterDataString ); + GetMediaDescr().erase( sFilterOptionsString ); + + if ( aFilterName == aOldFilterName ) + { + // merge filter option of the document filter + + ::comphelper::SequenceAsHashMap::const_iterator aIter = + GetDocProps().find( sFilterOptionsString ); + if ( aIter != GetDocProps().end() ) + GetMediaDescr()[aIter->first] = aIter->second; + + aIter = GetDocProps().find( sFilterDataString ); + if ( aIter != GetDocProps().end() ) + GetMediaDescr()[aIter->first] = aIter->second; + } + } + + uno::Reference< ui::dialogs::XFilePickerControlAccess > xExtFileDlg( pFileDlg->GetFilePicker(), uno::UNO_QUERY ); + if ( xExtFileDlg.is() ) + { + if ( SfxStoringHelper::CheckFilterOptionsAppearance( m_pOwner->GetFilterConfiguration(), aFilterName ) ) + bUseFilterOptions = true; + + if ( ( !( nStoreMode & EXPORT_REQUESTED ) || ( nStoreMode & WIDEEXPORT_REQUESTED ) ) && bUseFilterOptions ) + { + try + { + // for exporters: always show dialog if format uses options + // for save: show dialog if format uses options and no options given or if forced by user + uno::Any aVal = + xExtFileDlg->getValue( ui::dialogs::ExtendedFilePickerElementIds::CHECKBOX_FILTEROPTIONS, 0 ); + + aVal >>= bUseFilterOptions; + if ( !bUseFilterOptions ) + bUseFilterOptions = + ( GetMediaDescr().find( sFilterDataString ) == GetMediaDescr().end() + && GetMediaDescr().find( sFilterOptionsString ) == GetMediaDescr().end() ); + } + catch( const lang::IllegalArgumentException& ) + {} + } + } + + // merge in results of the dialog execution + GetMediaDescr()[OUString("URL")] <<= aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ); + GetMediaDescr()[sFilterNameString] <<= aFilterName; + + return bUseFilterOptions; +} + + +bool ModelData_Impl::ShowDocumentInfoDialog() +{ + bool bDialogUsed = false; + + try { + uno::Reference< frame::XController > xController = GetModel()->getCurrentController(); + if ( xController.is() ) + { + uno::Reference< frame::XDispatchProvider > xFrameDispatch( xController->getFrame(), uno::UNO_QUERY ); + if ( xFrameDispatch.is() ) + { + util::URL aURL; + aURL.Complete = ".uno:SetDocumentProperties"; + + uno::Reference < util::XURLTransformer > xTransformer( util::URLTransformer::create( comphelper::getProcessComponentContext() ) ); + if ( xTransformer->parseStrict( aURL ) ) + { + uno::Reference< frame::XDispatch > xDispatch = xFrameDispatch->queryDispatch( + aURL, + "_self", + 0 ); + if ( xDispatch.is() ) + { + // tdf#119206 use (abuse?) a SynchronMode of true, + // which will become SfxRequest::IsSynchronCall of true + // in SfxObjectShell::ExecFile_Impl to request that we + // do not want the properties dialog to be run async + uno::Sequence< beans::PropertyValue > aProperties{ + comphelper::makePropertyValue("SynchronMode", true) + }; + xDispatch->dispatch(aURL, aProperties); + bDialogUsed = true; + } + } + } + } + } + catch ( const uno::Exception& ) + { + } + + return bDialogUsed; +} + + +OUString ModelData_Impl::GetRecommendedExtension( const OUString& aTypeName ) +{ + if ( aTypeName.isEmpty() ) + return OUString(); + + uno::Reference< container::XNameAccess > xTypeDetection( + comphelper::getProcessServiceFactory()->createInstance("com.sun.star.document.TypeDetection"), + uno::UNO_QUERY ); + if ( xTypeDetection.is() ) + { + uno::Sequence< beans::PropertyValue > aTypeNameProps; + if ( ( xTypeDetection->getByName( aTypeName ) >>= aTypeNameProps ) && aTypeNameProps.hasElements() ) + { + ::comphelper::SequenceAsHashMap aTypeNamePropsHM( aTypeNameProps ); + uno::Sequence< OUString > aExtensions = aTypeNamePropsHM.getUnpackedValueOrDefault( + "Extensions", + ::uno::Sequence< OUString >() ); + if ( aExtensions.hasElements() ) + return aExtensions[0]; + } + } + + return OUString(); +} + + +OUString ModelData_Impl::GetRecommendedDir( const OUString& aSuggestedDir ) +{ + if ( ( !aSuggestedDir.isEmpty() || GetStorable()->hasLocation() ) + && !GetMediaDescr().getUnpackedValueOrDefault("RepairPackage", false ) ) + { + INetURLObject aLocation; + if ( !aSuggestedDir.isEmpty() ) + aLocation = INetURLObject( aSuggestedDir ); + else + { + const OUString aOldURL = GetStorable()->getLocation(); + if ( !aOldURL.isEmpty() ) + { + INetURLObject aTmp( aOldURL ); + if ( aTmp.removeSegment() ) + aLocation = aTmp; + } + + if ( aLocation.HasError() ) + aLocation = INetURLObject(); + } + + OUString sLocationURL( aLocation.GetMainURL( INetURLObject::DecodeMechanism::NONE ) ); + bool bIsInTempPath( false ); + OUString sSysTempPath; + if( osl::FileBase::getTempDirURL( sSysTempPath ) == osl::FileBase::E_None ) + bIsInTempPath = !sSysTempPath.isEmpty() && sLocationURL.startsWith( sSysTempPath ); +#ifdef _WIN32 + if( !bIsInTempPath ) + { + wchar_t sPath[MAX_PATH+1]; + HRESULT hRes = SHGetFolderPathW( nullptr, CSIDL_INTERNET_CACHE, nullptr, SHGFP_TYPE_CURRENT, sPath ); + if( SUCCEEDED(hRes) ) + { + OUString sTempINetFiles; + if( osl::FileBase::getFileURLFromSystemPath(OUString(o3tl::toU(sPath)), sTempINetFiles) == osl::FileBase::E_None ) + bIsInTempPath = !sTempINetFiles.isEmpty() && sLocationURL.startsWith( sTempINetFiles ); + } + } +#endif + // Suggest somewhere other than the system's temp directory + if( bIsInTempPath ) + aLocation = INetURLObject(); + + aLocation.setFinalSlash(); + if ( !aLocation.HasError() ) + return aLocation.GetMainURL( INetURLObject::DecodeMechanism::NONE ); + + return OUString(); + } + + return OUString(); +} + + +OUString ModelData_Impl::GetRecommendedName( const OUString& aSuggestedName, const OUString& aTypeName ) +{ + // the last used name might be provided by aSuggestedName from the old selection, or from the MediaDescriptor + if ( !aSuggestedName.isEmpty() ) + return aSuggestedName; + + OUString aRecommendedName{ INetURLObject(GetStorable()->getLocation()) + .GetLastName(INetURLObject::DecodeMechanism::WithCharset) }; + if ( aRecommendedName.isEmpty() ) + { + try { + uno::Reference< frame::XTitle > xTitle( GetModel(), uno::UNO_QUERY_THROW ); + aRecommendedName = xTitle->getTitle(); + } catch( const uno::Exception& ) {} + } + + if ( !aRecommendedName.isEmpty() && !aTypeName.isEmpty() ) + { + // adjust the extension to the type + uno::Reference< container::XNameAccess > xTypeDetection( + comphelper::getProcessServiceFactory()->createInstance("com.sun.star.document.TypeDetection"), + uno::UNO_QUERY ); + if ( xTypeDetection.is() ) + { + INetURLObject aObj( rtl::OUStringConcatenation("c:/" + aRecommendedName), INetProtocol::File, + INetURLObject::EncodeMechanism::All, RTL_TEXTENCODING_UTF8, FSysStyle::Dos ); + + const OUString aExtension = GetRecommendedExtension( aTypeName ); + if ( !aExtension.isEmpty() ) + aObj.SetExtension( aExtension ); + + aRecommendedName = aObj.GetLastName(INetURLObject::DecodeMechanism::WithCharset); + } + } + + return aRecommendedName; +} + + + + +SfxStoringHelper::SfxStoringHelper() +{ +} + + +uno::Reference< container::XNameAccess > const & SfxStoringHelper::GetFilterConfiguration() +{ + if ( !m_xFilterCFG.is() ) + { + m_xFilterCFG.set( comphelper::getProcessServiceFactory()->createInstance("com.sun.star.document.FilterFactory"), + uno::UNO_QUERY_THROW ); + } + + return m_xFilterCFG; +} + + +uno::Reference< container::XContainerQuery > const & SfxStoringHelper::GetFilterQuery() +{ + if ( !m_xFilterQuery.is() ) + { + m_xFilterQuery.set( GetFilterConfiguration(), uno::UNO_QUERY_THROW ); + } + + return m_xFilterQuery; +} + + +uno::Reference< css::frame::XModuleManager2 > const & SfxStoringHelper::GetModuleManager() +{ + if ( !m_xModuleManager.is() ) + { + m_xModuleManager = frame::ModuleManager::create( + comphelper::getProcessComponentContext() ); + } + + return m_xModuleManager; +} + +bool SfxStoringHelper::GUIStoreModel( const uno::Reference< frame::XModel >& xModel, + std::u16string_view aSlotName, + uno::Sequence< beans::PropertyValue >& aArgsSequence, + bool bPreselectPassword, + SignatureState nDocumentSignatureState ) +{ + ModelData_Impl aModelData( *this, xModel, aArgsSequence ); + + bool bDialogUsed = false; + + INetURLObject aURL; + + bool bSetStandardName = false; // can be set only for SaveAs + + // parse the slot name + bool bRemote = false; + sal_Int16 nStoreMode = getStoreModeFromSlotName( aSlotName ); + + if ( nStoreMode == SAVEASREMOTE_REQUESTED ) + { + nStoreMode = SAVEAS_REQUESTED; + bRemote = true; + } + + sal_Int8 nStatusSave = STATUS_NO_ACTION; + + ::comphelper::SequenceAsHashMap::const_iterator aSaveACopyIter = + aModelData.GetMediaDescr().find( OUString("SaveACopy") ); + if ( aSaveACopyIter != aModelData.GetMediaDescr().end() ) + { + bool bSaveACopy = false; + aSaveACopyIter->second >>= bSaveACopy; + if ( bSaveACopy ) + nStoreMode = EXPORT_REQUESTED | SAVEACOPY_REQUESTED | WIDEEXPORT_REQUESTED; + } + // handle the special cases + if ( nStoreMode & SAVEAS_REQUESTED ) + { + ::comphelper::SequenceAsHashMap::const_iterator aSaveToIter = + aModelData.GetMediaDescr().find( OUString("SaveTo") ); + if ( aSaveToIter != aModelData.GetMediaDescr().end() ) + { + bool bWideExport = false; + aSaveToIter->second >>= bWideExport; + if ( bWideExport ) + nStoreMode = EXPORT_REQUESTED | WIDEEXPORT_REQUESTED; + } + + // if saving is not acceptable the warning must be shown even in case of SaveAs operation + if ( ( nStoreMode & SAVEAS_REQUESTED ) && aModelData.CheckSaveAcceptable( STATUS_SAVEAS ) == STATUS_NO_ACTION ) + throw task::ErrorCodeIOException( + "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT", + uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT)); + } + else if ( nStoreMode & SAVE_REQUESTED ) + { + // if saving is not acceptable by the configuration the warning must be shown + nStatusSave = aModelData.CheckSaveAcceptable( STATUS_SAVE ); + + if ( nStatusSave == STATUS_NO_ACTION ) + throw task::ErrorCodeIOException( + "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT", + uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT)); + else if ( nStatusSave == STATUS_SAVE ) + { + // check whether it is possible to use save operation + nStatusSave = aModelData.CheckStateForSave(); + } + + if ( nStatusSave == STATUS_NO_ACTION ) + { + throw task::ErrorCodeIOException( + "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT", + uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT)); + } + else if ( nStatusSave != STATUS_SAVE ) + { + // this should be a usual SaveAs operation + nStoreMode = SAVEAS_REQUESTED; + if ( nStatusSave == STATUS_SAVEAS_STANDARDNAME ) + bSetStandardName = true; + } + } + + if (!comphelper::LibreOfficeKit::isActive() && !( nStoreMode & EXPORT_REQUESTED ) ) + { + // if it is no export, warn user that the signature will be removed + if ( SignatureState::OK == nDocumentSignatureState + || SignatureState::INVALID == nDocumentSignatureState + || SignatureState::NOTVALIDATED == nDocumentSignatureState + || SignatureState::PARTIAL_OK == nDocumentSignatureState) + { + std::unique_ptr<weld::MessageDialog> xMessageBox(Application::CreateMessageDialog(SfxStoringHelper::GetModelWindow(xModel), + VclMessageType::Question, VclButtonsType::YesNo, SfxResId(RID_SVXSTR_XMLSEC_QUERY_LOSINGSIGNATURE))); + if (xMessageBox->run() != RET_YES) + { + // the user has decided not to store the document + throw task::ErrorCodeIOException( + "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_ABORT (Preserve Signature)", + uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_ABORT)); + } + } + } + + if ( nStoreMode & SAVE_REQUESTED && nStatusSave == STATUS_SAVE ) + { + // Document properties can contain streams that should be freed before storing + aModelData.FreeDocumentProps(); + + if ( aModelData.GetStorable2().is() ) + { + try + { + aModelData.GetStorable2()->storeSelf( aModelData.GetMediaDescr().getAsConstPropertyValueList() ); + } + catch (const lang::IllegalArgumentException&) + { + TOOLS_WARN_EXCEPTION("sfx.doc", "Ignoring parameters! ModelData considers this illegal"); + aModelData.GetStorable()->store(); + } + } + else + { + OSL_FAIL( "XStorable2 is not supported by the model!" ); + aModelData.GetStorable()->store(); + } + + return false; + } + + // preselect a filter for the storing process + uno::Sequence< beans::PropertyValue > aFilterProps = aModelData.GetPreselectedFilter_Impl( nStoreMode ); + + DBG_ASSERT( aFilterProps.hasElements(), "No filter for storing!\n" ); + if ( !aFilterProps.hasElements() ) + throw task::ErrorCodeIOException( + "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_INVALIDPARAMETER", + uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_INVALIDPARAMETER)); + + ::comphelper::SequenceAsHashMap aFilterPropsHM( aFilterProps ); + OUString aFilterName = aFilterPropsHM.getUnpackedValueOrDefault( "Name", OUString() ); + + const OUString sFilterNameString(aFilterNameString); + + const OUString aFilterFromMediaDescr = aModelData.GetMediaDescr().getUnpackedValueOrDefault( sFilterNameString, OUString() ); + const OUString aOldFilterName = aModelData.GetDocProps().getUnpackedValueOrDefault( sFilterNameString, OUString() ); + + bool bUseFilterOptions = false; + ::comphelper::SequenceAsHashMap::const_iterator aFileNameIter = aModelData.GetMediaDescr().find( OUString("URL") ); + + const OUString sFilterOptionsString(aFilterOptionsString); + const OUString sFilterDataString(aFilterDataString); + + bool bPDFOptions = (nStoreMode & PDFEXPORT_REQUESTED) && !(nStoreMode & PDFDIRECTEXPORT_REQUESTED); + bool bEPUBOptions = (nStoreMode & EPUBEXPORT_REQUESTED) && !(nStoreMode & EPUBDIRECTEXPORT_REQUESTED); + if ( ( nStoreMode & EXPORT_REQUESTED ) && (bPDFOptions || bEPUBOptions) ) + { + // this is PDF or EPUB export, the filter options dialog should be shown before the export + aModelData.GetMediaDescr()[sFilterNameString] <<= aFilterName; + if ( aModelData.GetMediaDescr().find( "FilterFlags" ) == aModelData.GetMediaDescr().end() + && aModelData.GetMediaDescr().find( sFilterOptionsString ) == aModelData.GetMediaDescr().end() + && aModelData.GetMediaDescr().find( sFilterDataString ) == aModelData.GetMediaDescr().end() ) + { + // execute filter options dialog since no options are set in the media descriptor + if ( aModelData.ExecuteFilterDialog_Impl( aFilterName ) ) + bDialogUsed = true; + } + } + + if ( aFileNameIter == aModelData.GetMediaDescr().end() ) + { + sal_Int16 nDialog = SFX2_IMPL_DIALOG_CONFIG; + + if( bRemote ) + { + nDialog = SFX2_IMPL_DIALOG_REMOTE; + } + else + { + ::comphelper::SequenceAsHashMap::const_iterator aDlgIter = + aModelData.GetMediaDescr().find( OUString("UseSystemDialog") ); + if ( aDlgIter != aModelData.GetMediaDescr().end() ) + { + bool bUseSystemDialog = true; + if ( aDlgIter->second >>= bUseSystemDialog ) + { + if ( bUseSystemDialog ) + nDialog = SFX2_IMPL_DIALOG_SYSTEM; + else + nDialog = SFX2_IMPL_DIALOG_OOO; + } + } + } + + // The Dispatch supports parameter FolderName that overwrites SuggestedSaveAsDir + OUString aSuggestedDir = aModelData.GetMediaDescr().getUnpackedValueOrDefault("FolderName", OUString() ); + if ( aSuggestedDir.isEmpty() ) + { + aSuggestedDir = aModelData.GetMediaDescr().getUnpackedValueOrDefault("SuggestedSaveAsDir", OUString() ); + if ( aSuggestedDir.isEmpty() ) + aSuggestedDir = aModelData.GetDocProps().getUnpackedValueOrDefault("SuggestedSaveAsDir", OUString() ); + } + + OUString aSuggestedName = aModelData.GetMediaDescr().getUnpackedValueOrDefault("SuggestedSaveAsName", OUString() ); + if ( aSuggestedName.isEmpty() ) + aSuggestedName = aModelData.GetDocProps().getUnpackedValueOrDefault("SuggestedSaveAsName", OUString() ); + + OUString sStandardDir; + ::comphelper::SequenceAsHashMap::const_iterator aStdDirIter = + aModelData.GetMediaDescr().find( OUString("StandardDir") ); + if ( aStdDirIter != aModelData.GetMediaDescr().end() ) + aStdDirIter->second >>= sStandardDir; + + css::uno::Sequence< OUString > aDenyList; + + ::comphelper::SequenceAsHashMap::const_iterator aDenyListIter = + aModelData.GetMediaDescr().find( OUString("DenyList") ); + if ( aDenyListIter != aModelData.GetMediaDescr().end() ) + aDenyListIter->second >>= aDenyList; + + for (;;) + { + // in case the dialog is opened a second time the folder should be the same as previously navigated to by the user, not what was handed over by initial parameters + bUseFilterOptions = aModelData.OutputFileDialog( nStoreMode, aFilterProps, bSetStandardName, aSuggestedName, bPreselectPassword, aSuggestedDir, nDialog, sStandardDir, aDenyList ); + if ( nStoreMode == SAVEAS_REQUESTED ) + { + // in case of saving check filter for possible alien warning + const OUString aSelFilterName = aModelData.GetMediaDescr().getUnpackedValueOrDefault( sFilterNameString, OUString() ); + sal_Int8 nStatusFilterSave = aModelData.CheckFilter( aSelFilterName ); + if ( nStatusFilterSave == STATUS_SAVEAS_STANDARDNAME ) + { + // switch to best filter + bSetStandardName = true; + } + else if ( nStatusFilterSave == STATUS_SAVE ) + { + // user confirmed alien filter or "good" filter is used + break; + } + } + else + break; + } + + bDialogUsed = true; + aFileNameIter = aModelData.GetMediaDescr().find( OUString("URL") ); + } + else + { + // the target file name is provided so check if new filter options + // are provided or old options can be used + if ( aFilterFromMediaDescr == aOldFilterName ) + { + ::comphelper::SequenceAsHashMap::const_iterator aIter = + aModelData.GetDocProps().find( sFilterOptionsString ); + if ( aIter != aModelData.GetDocProps().end() + && aModelData.GetMediaDescr().find( sFilterOptionsString ) == aModelData.GetMediaDescr().end() ) + aModelData.GetMediaDescr()[aIter->first] = aIter->second; + + aIter = aModelData.GetDocProps().find( sFilterDataString ); + if ( aIter != aModelData.GetDocProps().end() + && aModelData.GetMediaDescr().find( sFilterDataString ) == aModelData.GetMediaDescr().end() ) + aModelData.GetMediaDescr()[aIter->first] = aIter->second; + } + } + + if ( aFileNameIter != aModelData.GetMediaDescr().end() ) + { + OUString aFileName; + aFileNameIter->second >>= aFileName; + aURL.SetURL( aFileName ); + DBG_ASSERT( aURL.GetProtocol() != INetProtocol::NotValid, "Illegal URL!" ); + + ::comphelper::SequenceAsHashMap::const_iterator aIter = + aModelData.GetMediaDescr().find( sFilterNameString ); + + if ( aIter != aModelData.GetMediaDescr().end() ) + aIter->second >>= aFilterName; + else + aModelData.GetMediaDescr()[sFilterNameString] <<= aFilterName; + + DBG_ASSERT( !aFilterName.isEmpty(), "Illegal filter!" ); + } + else + { + SAL_WARN( "sfx.doc", "This code must be unreachable!" ); + throw task::ErrorCodeIOException( + "SfxStoringHelper::GUIStoreModel: ERRCODE_IO_INVALIDPARAMETER", + uno::Reference< uno::XInterface >(), sal_uInt32(ERRCODE_IO_INVALIDPARAMETER)); + } + + ::comphelper::SequenceAsHashMap::const_iterator aIter = + aModelData.GetMediaDescr().find( OUString("FilterFlags") ); + bool bFilterFlagsSet = ( aIter != aModelData.GetMediaDescr().end() ); + + // check if the filter Dialog has not been called before + if( !( nStoreMode & PDFEXPORT_REQUESTED ) && !( nStoreMode & EPUBEXPORT_REQUESTED ) && !bFilterFlagsSet + && ( ( nStoreMode & EXPORT_REQUESTED ) || bUseFilterOptions ) ) + { + // execute filter options dialog + if ( aModelData.ExecuteFilterDialog_Impl( aFilterName ) ) + { + bDialogUsed = true; + // check if the file is a pdf or not and change the storing mode at convenience + if (aFilterName.endsWith("pdf_Export")) + nStoreMode = EXPORT_REQUESTED | PDFEXPORT_REQUESTED; + } + } + + // so the arguments will not change any more and can be stored to the main location + aArgsSequence = aModelData.GetMediaDescr().getAsConstPropertyValueList(); + + // store the document and handle it's docinfo + + DocumentSettingsGuard aSettingsGuard( aModelData.GetModel(), aModelData.IsRecommendReadOnly(), nStoreMode & EXPORT_REQUESTED ); + + OSL_ENSURE( aModelData.GetMediaDescr().find( OUString( "Password" ) ) == aModelData.GetMediaDescr().end(), "The Password property of MediaDescriptor should not be used here!" ); + if ( officecfg::Office::Common::Save::Document::EditProperty::get() + && ( !aModelData.GetStorable()->hasLocation() + || INetURLObject( aModelData.GetStorable()->getLocation() ) != aURL ) ) + { + // this is definitely not a Save operation + // so the document info can be updated + + // on export document info must be preserved + uno::Reference<document::XDocumentPropertiesSupplier> xDPS( + aModelData.GetModel(), uno::UNO_QUERY_THROW); + uno::Reference<util::XCloneable> xCloneable( + xDPS->getDocumentProperties(), uno::UNO_QUERY_THROW); + uno::Reference<document::XDocumentProperties> xOldDocProps( + xCloneable->createClone(), uno::UNO_QUERY_THROW); + + // use dispatch API to show document info dialog + if ( aModelData.ShowDocumentInfoDialog() ) + bDialogUsed = true; + else + { + OSL_FAIL( "Can't execute document info dialog!" ); + } + + try { + // Document properties can contain streams that should be freed before storing + aModelData.FreeDocumentProps(); + if ( nStoreMode & EXPORT_REQUESTED ) + aModelData.GetStorable()->storeToURL( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), aArgsSequence ); + else + aModelData.GetStorable()->storeAsURL( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), aArgsSequence ); + } + catch( const uno::Exception& ) + { + if ( nStoreMode & EXPORT_REQUESTED ) + { + SetDocInfoState(aModelData.GetModel(), xOldDocProps); + } + throw; + } + + if ( nStoreMode & EXPORT_REQUESTED ) + { + SetDocInfoState(aModelData.GetModel(), xOldDocProps); + } + } + else + { + // Document properties can contain streams that should be freed before storing + aModelData.FreeDocumentProps(); + + // this is actually a save operation with different parameters + // so storeTo or storeAs without DocInfo operations are used + if ( nStoreMode & EXPORT_REQUESTED ) + aModelData.GetStorable()->storeToURL( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), aArgsSequence ); + else + aModelData.GetStorable()->storeAsURL( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), aArgsSequence ); + } + + // Launch PDF viewer + if ( nStoreMode & PDFEXPORT_REQUESTED ) + { + FilterConfigItem aItem(u"Office.Common/Filter/PDF/Export/"); + bool aViewPDF = aItem.ReadBool( "ViewPDFAfterExport", false ); + + if ( aViewPDF ) + { + uno::Reference<XSystemShellExecute> xSystemShellExecute(SystemShellExecute::create( ::comphelper::getProcessComponentContext() ) ); + xSystemShellExecute->execute( aURL.GetMainURL( INetURLObject::DecodeMechanism::NONE ), "", SystemShellExecuteFlags::URIS_ONLY ); + } + } + + return bDialogUsed; +} + + +// static +bool SfxStoringHelper::CheckFilterOptionsAppearance( + const uno::Reference< container::XNameAccess >& xFilterCFG, + const OUString& aFilterName ) +{ + bool bUseFilterOptions = false; + + DBG_ASSERT( xFilterCFG.is(), "No filter configuration!\n" ); + if( xFilterCFG.is() ) + { + try { + uno::Sequence < beans::PropertyValue > aProps; + uno::Any aAny = xFilterCFG->getByName( aFilterName ); + if ( aAny >>= aProps ) + { + ::comphelper::SequenceAsHashMap aPropsHM( aProps ); + if( !aPropsHM.getUnpackedValueOrDefault( "UIComponent", OUString() ).isEmpty() ) + bUseFilterOptions = true; + } + } + catch( const uno::Exception& ) + { + } + } + + return bUseFilterOptions; +} + + +// static +void SfxStoringHelper::SetDocInfoState( + const uno::Reference< frame::XModel >& xModel, + const uno::Reference< document::XDocumentProperties>& i_xOldDocProps ) +{ + uno::Reference<document::XDocumentPropertiesSupplier> const + xModelDocPropsSupplier(xModel, uno::UNO_QUERY_THROW); + uno::Reference<document::XDocumentProperties> const xDocPropsToFill = + xModelDocPropsSupplier->getDocumentProperties(); + uno::Reference< beans::XPropertySet > const xPropSet( + i_xOldDocProps->getUserDefinedProperties(), uno::UNO_QUERY_THROW); + + uno::Reference< util::XModifiable > xModifiable( xModel, uno::UNO_QUERY ); + if ( !xModifiable.is() ) + throw uno::RuntimeException(); + + bool bIsModified = xModifiable->isModified(); + + try + { + uno::Reference< beans::XPropertySet > const xSet( + xDocPropsToFill->getUserDefinedProperties(), uno::UNO_QUERY); + uno::Reference< beans::XPropertyContainer > xContainer( xSet, uno::UNO_QUERY ); + uno::Reference< beans::XPropertySetInfo > xSetInfo = xSet->getPropertySetInfo(); + const uno::Sequence< beans::Property > lProps = xSetInfo->getProperties(); + for (const beans::Property& rProp : lProps) + { + uno::Any aValue = xPropSet->getPropertyValue( rProp.Name ); + if ( rProp.Attributes & css::beans::PropertyAttribute::REMOVABLE ) + { + try + { + // QUESTION: DefaultValue?! + xContainer->addProperty( rProp.Name, rProp.Attributes, aValue ); + } + catch (beans::PropertyExistException const&) {} + try + { + // it is possible that the propertysets from XML and binary files differ; we shouldn't break then + xSet->setPropertyValue( rProp.Name, aValue ); + } + catch ( const uno::Exception& ) {} + } + } + + // sigh... have to set these manually I'm afraid... wonder why + // SfxObjectShell doesn't handle this internally, should be easier + xDocPropsToFill->setAuthor(i_xOldDocProps->getAuthor()); + xDocPropsToFill->setGenerator(i_xOldDocProps->getGenerator()); + xDocPropsToFill->setCreationDate(i_xOldDocProps->getCreationDate()); + xDocPropsToFill->setTitle(i_xOldDocProps->getTitle()); + xDocPropsToFill->setSubject(i_xOldDocProps->getSubject()); + xDocPropsToFill->setDescription(i_xOldDocProps->getDescription()); + xDocPropsToFill->setKeywords(i_xOldDocProps->getKeywords()); + xDocPropsToFill->setModifiedBy(i_xOldDocProps->getModifiedBy()); + xDocPropsToFill->setModificationDate(i_xOldDocProps->getModificationDate()); + xDocPropsToFill->setPrintedBy(i_xOldDocProps->getPrintedBy()); + xDocPropsToFill->setPrintDate(i_xOldDocProps->getPrintDate()); + xDocPropsToFill->setAutoloadURL(i_xOldDocProps->getAutoloadURL()); + xDocPropsToFill->setAutoloadSecs(i_xOldDocProps->getAutoloadSecs()); + xDocPropsToFill->setDefaultTarget(i_xOldDocProps->getDefaultTarget()); + xDocPropsToFill->setEditingCycles(i_xOldDocProps->getEditingCycles()); + xDocPropsToFill->setEditingDuration(i_xOldDocProps->getEditingDuration()); + // other attributes e.g. DocumentStatistics are not editable from dialog + } + catch (const uno::Exception&) + { + TOOLS_INFO_EXCEPTION("sfx.doc", "SetDocInfoState"); + } + + // set the modified flag back if required + if ( bIsModified != bool(xModifiable->isModified()) ) + xModifiable->setModified( bIsModified ); +} + + +// static +bool SfxStoringHelper::WarnUnacceptableFormat( const uno::Reference< frame::XModel >& xModel, + std::u16string_view aOldUIName, + const OUString& aDefExtension, + bool bDefIsAlien ) +{ + if ( !officecfg::Office::Common::Save::Document::WarnAlienFormat::get() ) + return true; + + weld::Window* pWin = SfxStoringHelper::GetModelWindow(xModel); + SfxAlienWarningDialog aDlg(pWin, aOldUIName, aDefExtension, bDefIsAlien); + + return aDlg.run() == RET_OK; +} + +uno::Reference<awt::XWindow> SfxStoringHelper::GetModelXWindow(const uno::Reference<frame::XModel>& xModel) +{ + try { + if ( xModel.is() ) + { + uno::Reference< frame::XController > xController = xModel->getCurrentController(); + if ( xController.is() ) + { + uno::Reference< frame::XFrame > xFrame = xController->getFrame(); + if ( xFrame.is() ) + { + return xFrame->getContainerWindow(); + } + } + } + } + catch ( const uno::Exception& ) + { + } + + return uno::Reference<awt::XWindow>(); +} + +weld::Window* SfxStoringHelper::GetModelWindow( const uno::Reference< frame::XModel >& xModel ) +{ + weld::Window* pWin = nullptr; + + try + { + pWin = Application::GetFrameWeld(GetModelXWindow(xModel)); + } + catch (const uno::Exception&) + { + } + + return pWin; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |