diff options
Diffstat (limited to 'svx/qa/unit/classicshapes.cxx')
| -rw-r--r-- | svx/qa/unit/classicshapes.cxx | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/svx/qa/unit/classicshapes.cxx b/svx/qa/unit/classicshapes.cxx new file mode 100644 index 000000000..bb5bea745 --- /dev/null +++ b/svx/qa/unit/classicshapes.cxx @@ -0,0 +1,211 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + */ + +#include <test/bootstrapfixture.hxx> +#include <unotest/macros_test.hxx> +#include <rtl/ustring.hxx> +#include <editeng/unoprnms.hxx> + +#include <cppunit/TestAssert.h> + +#include <com/sun/star/beans/XPropertySet.hpp> +#include <com/sun/star/drawing/XDrawPagesSupplier.hpp> +#include <com/sun/star/drawing/XDrawPage.hpp> +#include <com/sun/star/awt/Rectangle.hpp> +#include <com/sun/star/frame/Desktop.hpp> + +using namespace ::com::sun::star; + +namespace +{ +constexpr OUStringLiteral sDataDirectory(u"svx/qa/unit/data/"); + +/// Tests not about special features of custom shapes, but about shapes in general. +class ClassicshapesTest : public test::BootstrapFixture, public unotest::MacrosTest +{ +protected: + uno::Reference<lang::XComponent> mxComponent; + uno::Reference<drawing::XShape> getShape(sal_uInt8 nShapeIndex, sal_uInt8 nPageIndex); + +public: + virtual void setUp() override + { + test::BootstrapFixture::setUp(); + mxDesktop.set(frame::Desktop::create(m_xContext)); + } + + virtual void tearDown() override + { + if (mxComponent.is()) + { + mxComponent->dispose(); + } + test::BootstrapFixture::tearDown(); + } +}; + +uno::Reference<drawing::XShape> ClassicshapesTest::getShape(sal_uInt8 nShapeIndex, + sal_uInt8 nPageIndex) +{ + uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, + uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("Could not get XDrawPagesSupplier", xDrawPagesSupplier.is()); + uno::Reference<drawing::XDrawPages> xDrawPages(xDrawPagesSupplier->getDrawPages()); + uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(nPageIndex), + uno::UNO_QUERY_THROW); + CPPUNIT_ASSERT_MESSAGE("Could not get xDrawPage", xDrawPage.is()); + uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(nShapeIndex), uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get xShape", xShape.is()); + return xShape; +} + +CPPUNIT_TEST_FIXTURE(ClassicshapesTest, testTdf98584ShearVertical) +{ + // The document contains draw:rect, draw:polygon and draw:path objects. + // They are vertical sheared by skewY(-0.927295218002) or by matrix(1 2 0 1 1cm 1cm). + // Notice, skewY and matrix are interpreted on file open, but not written on file save. + // They are converted to rotate * shear horizontal * scale. + // Besides using a wrong sign in shear angle, error was, that TRSetGeometry of SdrPathObj did + // not consider the additional scaling (tdf#98565). + const OUString sURL(m_directories.getURLFromSrc(sDataDirectory) + "tdf98584_ShearVertical.odg"); + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + + // Tests skewY + for (sal_uInt8 nPageIndex = 0; nPageIndex < 3; ++nPageIndex) + { + awt::Rectangle aFrameRect; + uno::Reference<drawing::XShape> xShape(getShape(0, nPageIndex)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRect; + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Width on skewY page " + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + 5001.0, aFrameRect.Width, 2.0); + double nShearA; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_SHEARANGLE) >>= nShearA; + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Share angle on skewY page " + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + -5313.0, nShearA, 2.0); + double nRotA; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_ROTATEANGLE) >>= nRotA; + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Rotate angle on skewY page " + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + 30687.0, nRotA, 2.0); + } + + // Tests matrix + for (sal_uInt8 nPageIndex = 3; nPageIndex < 6; ++nPageIndex) + { + awt::Rectangle aFrameRect; + uno::Reference<drawing::XShape> xShape(getShape(0, nPageIndex)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRect; + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Width on matrix page " + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + 5001.0, aFrameRect.Width, 2.0); + double nShearA; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_SHEARANGLE) >>= nShearA; + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Share angle on matrix page " + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + -6343.0, nShearA, 2.0); + double nRotA; + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_ROTATEANGLE) >>= nRotA; + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Rotate angle on matrix page " + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + 29657.0, nRotA, 2.0); + } +} + +CPPUNIT_TEST_FIXTURE(ClassicshapesTest, testTdf98583ShearHorizontal) +{ + // The document contains rectangles with LT 3000,5000 and RB 5000,9000. + // skewX (-0.78539816339744830961) = skewX(-45deg) is applied on the first page + // matrix(1 0 1 1 0cm 0cm) on the second page. Both should result in a parallelogram with + // LT 8000,5000 and RB 14000, 9000, which means width 6001, height 4001. + // Error was, that not the mathematical matrix was used, but the API matrix, which has + // wrong sign in shear angle. + const OUString sURL(m_directories.getURLFromSrc(sDataDirectory) + + "tdf98583_ShearHorizontal.odp"); + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.presentation.PresentationDocument"); + + for (sal_uInt8 nPageIndex = 0; nPageIndex < 2; ++nPageIndex) + { + awt::Rectangle aFrameRect; + uno::Reference<drawing::XShape> xShape(getShape(0, nPageIndex)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); + xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRect; + + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Left Position on page " + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + 8000.0, aFrameRect.X, 2.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Top Position on page " + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + 5000.0, aFrameRect.Y, 2.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Width on page " + OUString::number(nPageIndex)).toUtf8().getStr(), + 6001.0, aFrameRect.Width, 2.0); + CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE( + OUString("Incorrect Height on page " + OUString::number(nPageIndex)).toUtf8().getStr(), + 4001.0, aFrameRect.Height, 2.0); + } +} + +CPPUNIT_TEST_FIXTURE(ClassicshapesTest, testTdf130076Flip) +{ + // The document contains sections of a circle, one of which is scaled + // (1, -1), one of which is scaled (-1,1), one of which is transformed + // by a matrix equivalent to a vertical flip, and another which is + // transformed by a matrix equivalent to a horizontal flip. Error was + // that the transformation was made before the CircleKind was set, + // resulting in the flip being performed incorrectly. + const OUString sURL(m_directories.getURLFromSrc(sDataDirectory) + + "tdf130076_FlipOnSectorSection.odg"); + mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); + + for (sal_uInt8 nPageIndex = 0; nPageIndex < 2; ++nPageIndex) + { + double nAngle1(0.0), nAngle2(0.0); + uno::Reference<drawing::XShape> xShape(getShape(1, nPageIndex)); + uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY); + uno::Reference<drawing::XShape> xShape2(getShape(2, nPageIndex)); + uno::Reference<beans::XPropertySet> xShapeProps2(xShape2, uno::UNO_QUERY); + CPPUNIT_ASSERT(xShapeProps->getPropertyValue("CircleStartAngle") >>= nAngle1); + CPPUNIT_ASSERT(xShapeProps2->getPropertyValue("CircleStartAngle") >>= nAngle2); + CPPUNIT_ASSERT_EQUAL_MESSAGE(OUString("Incorrect vertical flip starting angle on page " + + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + 26000.0, nAngle1); + CPPUNIT_ASSERT_EQUAL_MESSAGE(OUString("Incorrect horizontal flip starting angle on page " + + OUString::number(nPageIndex)) + .toUtf8() + .getStr(), + 26000.0, nAngle2); + } +} +} +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |