diff options
Diffstat (limited to '')
| -rw-r--r-- | sw/source/ui/frmdlg/column.cxx | 1381 |
1 files changed, 1381 insertions, 0 deletions
diff --git a/sw/source/ui/frmdlg/column.cxx b/sw/source/ui/frmdlg/column.cxx new file mode 100644 index 000000000..e03eb2945 --- /dev/null +++ b/sw/source/ui/frmdlg/column.cxx @@ -0,0 +1,1381 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <column.hxx> + +#include <hintids.hxx> +#include <svx/dialmgr.hxx> +#include <svx/strings.hrc> +#include <sfx2/htmlmode.hxx> +#include <svx/colorbox.hxx> +#include <editeng/borderline.hxx> +#include <editeng/boxitem.hxx> +#include <editeng/lrspitem.hxx> +#include <editeng/sizeitem.hxx> +#include <editeng/frmdiritem.hxx> +#include <editeng/ulspitem.hxx> +#include <svl/ctloptions.hxx> +#include <svl/itemset.hxx> +#include <sfx2/dispatch.hxx> +#include <sfx2/viewfrm.hxx> +#include <vcl/event.hxx> +#include <vcl/fieldvalues.hxx> +#include <vcl/settings.hxx> +#include <vcl/svapp.hxx> + +#include <swmodule.hxx> + +#include <swtypes.hxx> +#include <wrtsh.hxx> +#include <view.hxx> +#include <docsh.hxx> +#include <uitool.hxx> +#include <cmdid.h> +#include <viewopt.hxx> +#include <fmtclbl.hxx> +#include <fmtfsize.hxx> +#include <frmatr.hxx> +#include <colmgr.hxx> +#include <prcntfld.hxx> +#include <strings.hrc> +#include <section.hxx> +#include <pagedesc.hxx> + +//to match associated data in ColumnPage.ui +#define LISTBOX_SELECTION 0 +#define LISTBOX_SECTION 1 +#define LISTBOX_SECTIONS 2 +#define LISTBOX_PAGE 3 +#define LISTBOX_FRAME 4 + +using namespace ::com::sun::star; + +#define FRAME_FORMAT_WIDTH 1000 + +// static data +const sal_uInt16 nVisCols = 3; + +static bool IsMarkInSameSection( SwWrtShell& rWrtSh, const SwSection* pSect ) +{ + rWrtSh.SwapPam(); + bool bRet = pSect == rWrtSh.GetCurrSection(); + rWrtSh.SwapPam(); + return bRet; +} + +SwColumnDlg::SwColumnDlg(weld::Window* pParent, SwWrtShell& rSh) + : SfxDialogController(pParent, "modules/swriter/ui/columndialog.ui", "ColumnDialog") + , m_rWrtShell(rSh) + , m_pFrameSet(nullptr) + , m_nOldSelection(0) + , m_nSelectionWidth(0) + , m_bPageChanged(false) + , m_bSectionChanged(false) + , m_bSelSectionChanged(false) + , m_bFrameChanged(false) + , m_xContentArea(m_xDialog->weld_content_area()) + , m_xOkButton(m_xBuilder->weld_button("ok")) +{ + SwRect aRect; + m_rWrtShell.CalcBoundRect(aRect, RndStdIds::FLY_AS_CHAR); + + m_nSelectionWidth = aRect.Width(); + + SfxItemSet* pColPgSet = nullptr; + static const auto aSectIds = svl::Items<RES_FRM_SIZE, RES_FRM_SIZE, + RES_COL, RES_COL, + RES_COLUMNBALANCE, RES_FRAMEDIR>; + + const SwSection* pCurrSection = m_rWrtShell.GetCurrSection(); + const sal_uInt16 nFullSectCnt = m_rWrtShell.GetFullSelectedSectionCount(); + if( pCurrSection && ( !m_rWrtShell.HasSelection() || 0 != nFullSectCnt )) + { + m_nSelectionWidth = rSh.GetSectionWidth(*pCurrSection->GetFormat()); + if ( !m_nSelectionWidth ) + m_nSelectionWidth = USHRT_MAX; + m_pSectionSet.reset( new SfxItemSet( m_rWrtShell.GetAttrPool(), aSectIds ) ); + m_pSectionSet->Put( pCurrSection->GetFormat()->GetAttrSet() ); + pColPgSet = m_pSectionSet.get(); + } + + if( m_rWrtShell.HasSelection() && m_rWrtShell.IsInsRegionAvailable() && + ( !pCurrSection || ( 1 != nFullSectCnt && + IsMarkInSameSection( m_rWrtShell, pCurrSection ) ))) + { + m_pSelectionSet.reset( new SfxItemSet( m_rWrtShell.GetAttrPool(), aSectIds ) ); + pColPgSet = m_pSelectionSet.get(); + } + + if( m_rWrtShell.GetFlyFrameFormat() ) + { + const SwFrameFormat* pFormat = rSh.GetFlyFrameFormat() ; + m_pFrameSet = new SfxItemSet(m_rWrtShell.GetAttrPool(), aSectIds ); + m_pFrameSet->Put(pFormat->GetFrameSize()); + m_pFrameSet->Put(pFormat->GetCol()); + pColPgSet = m_pFrameSet; + } + + const SwPageDesc* pPageDesc = m_rWrtShell.GetSelectedPageDescs(); + if( pPageDesc ) + { + m_pPageSet = std::make_unique<SfxItemSetFixed< + RES_FRM_SIZE, RES_FRM_SIZE, + RES_LR_SPACE, RES_LR_SPACE, + RES_COL, RES_COL>>(m_rWrtShell.GetAttrPool()); + + const SwFrameFormat &rFormat = pPageDesc->GetMaster(); + m_nPageWidth = rFormat.GetFrameSize().GetSize().Width(); + + const SvxLRSpaceItem& rLRSpace = rFormat.GetLRSpace(); + const SvxBoxItem& rBox = rFormat.GetBox(); + m_nPageWidth -= rLRSpace.GetLeft() + rLRSpace.GetRight() + rBox.GetSmallestDistance(); + + m_pPageSet->Put(rFormat.GetCol()); + m_pPageSet->Put(rFormat.GetLRSpace()); + pColPgSet = m_pPageSet.get(); + } + + assert(pColPgSet); + + // create TabPage + m_xTabPage = std::make_unique<SwColumnPage>(m_xContentArea.get(), this, *pColPgSet); + m_xTabPage->GetApplyLabel()->show(); + weld::ComboBox* pApplyToLB = m_xTabPage->GetApplyComboBox(); + pApplyToLB->show(); + + if (pCurrSection && (!m_rWrtShell.HasSelection() || 0 != nFullSectCnt)) + { + pApplyToLB->remove_id(1 >= nFullSectCnt ? OUString::number(LISTBOX_SECTIONS) : OUString::number(LISTBOX_SECTION)); + } + else + { + pApplyToLB->remove_id(OUString::number(LISTBOX_SECTION)); + pApplyToLB->remove_id(OUString::number(LISTBOX_SECTIONS)); + } + + if (!( m_rWrtShell.HasSelection() && m_rWrtShell.IsInsRegionAvailable() && + ( !pCurrSection || ( 1 != nFullSectCnt && + IsMarkInSameSection( m_rWrtShell, pCurrSection ) )))) + pApplyToLB->remove_id(OUString::number(LISTBOX_SELECTION)); + + if (!m_rWrtShell.GetFlyFrameFormat()) + pApplyToLB->remove_id(OUString::number(LISTBOX_FRAME)); + + const int nPagePos = pApplyToLB->find_id(OUString::number(LISTBOX_PAGE)); + if (m_pPageSet && pPageDesc) + { + const OUString sPageStr = pApplyToLB->get_text(nPagePos) + pPageDesc->GetName(); + pApplyToLB->remove(nPagePos); + OUString sId(OUString::number(LISTBOX_PAGE)); + pApplyToLB->insert(nPagePos, sPageStr, &sId, nullptr, nullptr); + } + else + pApplyToLB->remove( nPagePos ); + + pApplyToLB->set_active(0); + ObjectHdl(nullptr); + + pApplyToLB->connect_changed(LINK(this, SwColumnDlg, ObjectListBoxHdl)); + m_xOkButton->connect_clicked(LINK(this, SwColumnDlg, OkHdl)); + //#i80458# if no columns can be set then disable OK + if (!pApplyToLB->get_count()) + m_xOkButton->set_sensitive(false); + //#i97810# set focus to the TabPage + m_xTabPage->ActivateColumnControl(); +} + +SwColumnDlg::~SwColumnDlg() +{ + m_xTabPage.reset(); +} + +IMPL_LINK(SwColumnDlg, ObjectListBoxHdl, weld::ComboBox&, rBox, void) +{ + ObjectHdl(&rBox); +} + +void SwColumnDlg::ObjectHdl(const weld::ComboBox* pBox) +{ + SfxItemSet* pSet = EvalCurrentSelection(); + + if (pBox) + { + m_xTabPage->FillItemSet(pSet); + } + weld::ComboBox* pApplyToLB = m_xTabPage->GetApplyComboBox(); + m_nOldSelection = pApplyToLB->get_active_id().toInt32(); + tools::Long nWidth = m_nSelectionWidth; + switch(m_nOldSelection) + { + case LISTBOX_SELECTION : + pSet = m_pSelectionSet.get(); + if( m_pSelectionSet ) + pSet->Put(SwFormatFrameSize(SwFrameSize::Variable, nWidth, nWidth)); + break; + case LISTBOX_SECTION : + case LISTBOX_SECTIONS : + pSet = m_pSectionSet.get(); + pSet->Put(SwFormatFrameSize(SwFrameSize::Variable, nWidth, nWidth)); + break; + case LISTBOX_PAGE : + nWidth = m_nPageWidth; + pSet = m_pPageSet.get(); + pSet->Put(SwFormatFrameSize(SwFrameSize::Variable, nWidth, nWidth)); + break; + case LISTBOX_FRAME: + pSet = m_pFrameSet; + break; + } + + bool bIsSection = pSet == m_pSectionSet.get() || pSet == m_pSelectionSet.get(); + m_xTabPage->ShowBalance(bIsSection); + m_xTabPage->SetInSection(bIsSection); + m_xTabPage->SetFrameMode(true); + m_xTabPage->SetPageWidth(nWidth); + if( pSet ) + m_xTabPage->Reset(pSet); +} + +IMPL_LINK_NOARG(SwColumnDlg, OkHdl, weld::Button&, void) +{ + // evaluate current selection + SfxItemSet* pSet = EvalCurrentSelection(); + m_xTabPage->FillItemSet(pSet); + + if(m_pSelectionSet && SfxItemState::SET == m_pSelectionSet->GetItemState(RES_COL)) + { + //insert region with columns + const SwFormatCol& rColItem = m_pSelectionSet->Get(RES_COL); + //only if there actually are columns! + if(rColItem.GetNumCols() > 1) + m_rWrtShell.GetView().GetViewFrame()->GetDispatcher()->Execute( + FN_INSERT_REGION, SfxCallMode::ASYNCHRON, *m_pSelectionSet ); + } + + if(m_pSectionSet && m_pSectionSet->Count() && m_bSectionChanged ) + { + const SwSection* pCurrSection = m_rWrtShell.GetCurrSection(); + const SwSectionFormat* pFormat = pCurrSection->GetFormat(); + const size_t nNewPos = m_rWrtShell.GetSectionFormatPos( *pFormat ); + SwSectionData aData(*pCurrSection); + m_rWrtShell.UpdateSection( nNewPos, aData, m_pSectionSet.get() ); + } + + if(m_pSectionSet && m_pSectionSet->Count() && m_bSelSectionChanged ) + { + m_rWrtShell.SetSectionAttr( *m_pSectionSet ); + } + + if(m_pPageSet && SfxItemState::SET == m_pPageSet->GetItemState(RES_COL) && m_bPageChanged) + { + // determine current PageDescriptor and fill the Set with it + const size_t nCurIdx = m_rWrtShell.GetCurPageDesc(); + SwPageDesc aPageDesc(m_rWrtShell.GetPageDesc(nCurIdx)); + SwFrameFormat &rFormat = aPageDesc.GetMaster(); + rFormat.SetFormatAttr(m_pPageSet->Get(RES_COL)); + m_rWrtShell.ChgPageDesc(nCurIdx, aPageDesc); + } + if(m_pFrameSet && SfxItemState::SET == m_pFrameSet->GetItemState(RES_COL) && m_bFrameChanged) + { + SfxItemSetFixed<RES_COL, RES_COL> aTmp(*m_pFrameSet->GetPool()); + aTmp.Put(*m_pFrameSet); + m_rWrtShell.StartAction(); + m_rWrtShell.Push(); + m_rWrtShell.SetFlyFrameAttr( aTmp ); + // undo the frame selection again + if(m_rWrtShell.IsFrameSelected()) + { + m_rWrtShell.UnSelectFrame(); + m_rWrtShell.LeaveSelFrameMode(); + } + m_rWrtShell.Pop(); + m_rWrtShell.EndAction(); + } + m_xDialog->response(RET_OK); +} + +SfxItemSet* SwColumnDlg::EvalCurrentSelection() +{ + SfxItemSet* pSet = nullptr; + + switch(m_nOldSelection) + { + case LISTBOX_SELECTION : + pSet = m_pSelectionSet.get(); + break; + case LISTBOX_SECTION : + pSet = m_pSectionSet.get(); + m_bSectionChanged = true; + break; + case LISTBOX_SECTIONS : + pSet = m_pSectionSet.get(); + m_bSelSectionChanged = true; + break; + case LISTBOX_PAGE : + pSet = m_pPageSet.get(); + m_bPageChanged = true; + break; + case LISTBOX_FRAME: + pSet = m_pFrameSet; + m_bFrameChanged = true; + break; + } + + return pSet; +} + +static +sal_uInt16 GetMaxWidth( SwColMgr const * pColMgr, sal_uInt16 nCols ) +{ + sal_uInt16 nMax = pColMgr->GetActualSize(); + if( --nCols ) + nMax -= pColMgr->GetGutterWidth() * nCols; + return nMax; +} + +const WhichRangesContainer SwColumnPage::aPageRg(svl::Items<RES_COL, RES_COL>); + +void SwColumnPage::ResetColWidth() +{ + if( m_nCols ) + { + const sal_uInt16 nWidth = GetMaxWidth( m_xColMgr.get(), m_nCols ) / m_nCols; + + for(sal_uInt16 i = 0; i < m_nCols; ++i) + m_nColWidth[i] = static_cast<tools::Long>(nWidth); + } + +} + +constexpr sal_uInt16 g_nMinWidth(MINLAY); + +// Now as TabPage +SwColumnPage::SwColumnPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet &rSet) + : SfxTabPage(pPage, pController, "modules/swriter/ui/columnpage.ui", "ColumnPage", &rSet) + , m_nFirstVis(0) + , m_pModifiedField(nullptr) + , m_bFormat(false) + , m_bFrame(false) + , m_bHtmlMode(false) + , m_bLockUpdate(false) + , m_xCLNrEdt(m_xBuilder->weld_spin_button("colsnf")) + , m_xBalanceColsCB(m_xBuilder->weld_check_button("balance")) + , m_xBtnBack(m_xBuilder->weld_button("back")) + , m_xLbl1(m_xBuilder->weld_label("1")) + , m_xLbl2(m_xBuilder->weld_label("2")) + , m_xLbl3(m_xBuilder->weld_label("3")) + , m_xBtnNext(m_xBuilder->weld_button("next")) + , m_xAutoWidthBox(m_xBuilder->weld_check_button("autowidth")) + , m_xLineTypeLbl(m_xBuilder->weld_label("linestyleft")) + , m_xLineWidthLbl(m_xBuilder->weld_label("linewidthft")) + , m_xLineWidthEdit(m_xBuilder->weld_metric_spin_button("linewidthmf", FieldUnit::POINT)) + , m_xLineColorLbl(m_xBuilder->weld_label("linecolorft")) + , m_xLineHeightLbl(m_xBuilder->weld_label("lineheightft")) + , m_xLineHeightEdit(m_xBuilder->weld_metric_spin_button("lineheightmf", FieldUnit::PERCENT)) + , m_xLinePosLbl(m_xBuilder->weld_label("lineposft")) + , m_xLinePosDLB(m_xBuilder->weld_combo_box("lineposlb")) + , m_xTextDirectionFT(m_xBuilder->weld_label("textdirectionft")) + , m_xTextDirectionLB(new svx::FrameDirectionListBox(m_xBuilder->weld_combo_box("textdirectionlb"))) + , m_xLineColorDLB(new ColorListBox(m_xBuilder->weld_menu_button("colorlb"), + [this]{ return GetDialogController()->getDialog(); })) + , m_xLineTypeDLB(new SvtLineListBox(m_xBuilder->weld_menu_button("linestylelb"))) + , m_xEd1(new SwPercentField(m_xBuilder->weld_metric_spin_button("width1mf", FieldUnit::CM))) + , m_xEd2(new SwPercentField(m_xBuilder->weld_metric_spin_button("width2mf", FieldUnit::CM))) + , m_xEd3(new SwPercentField(m_xBuilder->weld_metric_spin_button("width3mf", FieldUnit::CM))) + , m_xDistEd1(new SwPercentField(m_xBuilder->weld_metric_spin_button("spacing1mf", FieldUnit::CM))) + , m_xDistEd2(new SwPercentField(m_xBuilder->weld_metric_spin_button("spacing2mf", FieldUnit::CM))) + , m_xDefaultVS(new weld::CustomWeld(*m_xBuilder, "valueset", m_aDefaultVS)) + , m_xPgeExampleWN(new weld::CustomWeld(*m_xBuilder, "pageexample", m_aPgeExampleWN)) + , m_xFrameExampleWN(new weld::CustomWeld(*m_xBuilder, "frameexample", m_aFrameExampleWN)) + , m_xApplyToFT(m_xBuilder->weld_label("applytoft")) + , m_xApplyToLB(m_xBuilder->weld_combo_box("applytolb")) +{ + connectPercentField(*m_xEd1); + connectPercentField(*m_xEd2); + connectPercentField(*m_xEd3); + connectPercentField(*m_xDistEd1); + connectPercentField(*m_xDistEd2); + + m_xTextDirectionLB->append(SvxFrameDirection::Horizontal_LR_TB, SvxResId(RID_SVXSTR_FRAMEDIR_LTR)); + m_xTextDirectionLB->append(SvxFrameDirection::Horizontal_RL_TB, SvxResId(RID_SVXSTR_FRAMEDIR_RTL)); + m_xTextDirectionLB->append(SvxFrameDirection::Environment, SvxResId(RID_SVXSTR_FRAMEDIR_SUPER)); + + SetExchangeSupport(); + + m_aDefaultVS.SetColCount(5); + + for (int i = 0; i < 5; ++i) + //Set accessible name one by one + { + OUString aItemText; + switch( i ) + { + case 0: + aItemText = SwResId( STR_COLUMN_VALUESET_ITEM0 ) ; + break; + case 1: + aItemText = SwResId( STR_COLUMN_VALUESET_ITEM1 ) ; + break; + case 2: + aItemText = SwResId( STR_COLUMN_VALUESET_ITEM2 ) ; + break; + case 3: + aItemText = SwResId( STR_COLUMN_VALUESET_ITEM3 ); + break; + default: + aItemText = SwResId( STR_COLUMN_VALUESET_ITEM4 ); + break; + } + m_aDefaultVS.InsertItem( i + 1, aItemText, i ); + } + + m_aDefaultVS.SetSelectHdl(LINK(this, SwColumnPage, SetDefaultsHdl)); + + Link<weld::SpinButton&,void> aCLNrLk = LINK(this, SwColumnPage, ColModify); + m_xCLNrEdt->connect_value_changed(aCLNrLk); + Link<weld::MetricSpinButton&,void> aLk = LINK(this, SwColumnPage, GapModify); + m_xDistEd1->connect_value_changed(aLk); + m_xDistEd2->connect_value_changed(aLk); + + aLk = LINK(this, SwColumnPage, EdModify); + + m_xEd1->connect_value_changed(aLk); + m_xEd2->connect_value_changed(aLk); + m_xEd3->connect_value_changed(aLk); + + m_xBtnBack->connect_clicked(LINK(this, SwColumnPage, Up)); + m_xBtnNext->connect_clicked(LINK(this, SwColumnPage, Down)); + m_xAutoWidthBox->connect_toggled(LINK(this, SwColumnPage, AutoWidthHdl)); + + Link<weld::MetricSpinButton&,void> aLk2 = LINK( this, SwColumnPage, UpdateColMgr ); + m_xLineTypeDLB->SetSelectHdl(LINK(this, SwColumnPage, UpdateColMgrLineBox)); + m_xLineWidthEdit->connect_value_changed(aLk2); + m_xLineColorDLB->SetSelectHdl(LINK( this, SwColumnPage, UpdateColMgrColorBox)); + m_xLineHeightEdit->connect_value_changed(aLk2); + m_xLinePosDLB->connect_changed(LINK(this, SwColumnPage, UpdateColMgrListBox)); + + // Separator line + m_xLineTypeDLB->SetSourceUnit( FieldUnit::TWIP ); + + // Fill the line styles listbox + m_xLineTypeDLB->InsertEntry( + ::editeng::SvxBorderLine::getWidthImpl(SvxBorderLineStyle::SOLID), + SvxBorderLineStyle::SOLID ); + m_xLineTypeDLB->InsertEntry( + ::editeng::SvxBorderLine::getWidthImpl(SvxBorderLineStyle::DOTTED), + SvxBorderLineStyle::DOTTED ); + m_xLineTypeDLB->InsertEntry( + ::editeng::SvxBorderLine::getWidthImpl(SvxBorderLineStyle::DASHED), + SvxBorderLineStyle::DASHED ); + + sal_Int64 nLineWidth = m_xLineWidthEdit->get_value(FieldUnit::POINT); + nLineWidth = static_cast<tools::Long>(vcl::ConvertDoubleValue( + nLineWidth, + m_xLineWidthEdit->get_digits(), + FieldUnit::POINT, MapUnit::MapTwip )); + m_xLineTypeDLB->SetWidth(nLineWidth); + m_xLineColorDLB->SelectEntry(COL_BLACK); +} + +SwColumnPage::~SwColumnPage() +{ + m_xFrameExampleWN.reset(); + m_xPgeExampleWN.reset(); + m_xDefaultVS.reset(); + m_xDistEd2.reset(); + m_xDistEd1.reset(); + m_xEd3.reset(); + m_xEd2.reset(); + m_xEd1.reset(); + m_xLineTypeDLB.reset(); + m_xLineColorDLB.reset(); + m_xTextDirectionLB.reset(); +} + +void SwColumnPage::SetPageWidth(tools::Long nPageWidth) +{ + tools::Long nNewMaxWidth = static_cast< tools::Long >(m_xEd1->NormalizePercent(nPageWidth)); + + m_xDistEd1->set_max(nNewMaxWidth, FieldUnit::TWIP); + m_xDistEd2->set_max(nNewMaxWidth, FieldUnit::TWIP); + m_xEd1->set_max(nNewMaxWidth, FieldUnit::TWIP); + m_xEd2->set_max(nNewMaxWidth, FieldUnit::TWIP); + m_xEd3->set_max(nNewMaxWidth, FieldUnit::TWIP); +} + +void SwColumnPage::connectPercentField(SwPercentField &rWrap) +{ + weld::MetricSpinButton *pField = rWrap.get(); + assert(pField); + m_aPercentFieldsMap[pField] = &rWrap; +} + +void SwColumnPage::Reset(const SfxItemSet *rSet) +{ + const sal_uInt16 nHtmlMode = + ::GetHtmlMode(static_cast<const SwDocShell*>(SfxObjectShell::Current())); + if(nHtmlMode & HTMLMODE_ON) + { + m_bHtmlMode = true; + m_xAutoWidthBox->set_sensitive(false); + } + FieldUnit aMetric = ::GetDfltMetric(m_bHtmlMode); + m_xEd1->SetMetric(aMetric); + m_xEd2->SetMetric(aMetric); + m_xEd3->SetMetric(aMetric); + m_xDistEd1->SetMetric(aMetric); + m_xDistEd2->SetMetric(aMetric); + //default spacing between cols = 0.5cm + m_xDistEd1->set_value(50, FieldUnit::CM); + m_xDistEd2->set_value(50, FieldUnit::CM); + + m_xColMgr.reset(new SwColMgr(*rSet)); + m_nCols = m_xColMgr->GetCount() ; + m_xCLNrEdt->set_max(std::max(o3tl::narrowing<sal_uInt16>(m_xCLNrEdt->get_max()), m_nCols)); + + if(m_bFrame) + { + if(m_bFormat) // there is no size here + m_xColMgr->SetActualWidth(FRAME_FORMAT_WIDTH); + else + { + const SwFormatFrameSize& rSize = rSet->Get(RES_FRM_SIZE); + const SvxBoxItem& rBox = rSet->Get(RES_BOX); + m_xColMgr->SetActualWidth(o3tl::narrowing<sal_uInt16>(rSize.GetSize().Width()) - rBox.GetSmallestDistance()); + } + } + if (m_xBalanceColsCB->get_visible()) + { + if( const SwFormatNoBalancedColumns* pItem = rSet->GetItemIfSet( RES_COLUMNBALANCE, false ) ) + m_xBalanceColsCB->set_active(!pItem->GetValue()); + else + m_xBalanceColsCB->set_active(true); + } + + //text direction + if( SfxItemState::DEFAULT <= rSet->GetItemState( RES_FRAMEDIR ) ) + { + const SvxFrameDirectionItem& rItem = rSet->Get(RES_FRAMEDIR); + SvxFrameDirection nVal = rItem.GetValue(); + m_xTextDirectionLB->set_active_id(nVal); + m_xTextDirectionLB->save_value(); + } + + Init(); + ActivatePage( *rSet ); +} + +// create TabPage +std::unique_ptr<SfxTabPage> SwColumnPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet *rSet) +{ + return std::make_unique<SwColumnPage>(pPage, pController, *rSet); +} + +// stuff attributes into the Set when OK +bool SwColumnPage::FillItemSet(SfxItemSet *rSet) +{ + // set in ItemSet; + // the current settings are already present + + const SfxPoolItem* pOldItem; + const SwFormatCol& rCol = m_xColMgr->GetColumns(); + if(nullptr == (pOldItem = GetOldItem( *rSet, RES_COL )) || + rCol != *pOldItem ) + rSet->Put(rCol); + + if (m_xBalanceColsCB->get_visible()) + { + rSet->Put(SwFormatNoBalancedColumns(!m_xBalanceColsCB->get_active())); + } + if (m_xTextDirectionLB->get_visible()) + { + if (m_xTextDirectionLB->get_value_changed_from_saved()) + { + rSet->Put(SvxFrameDirectionItem(m_xTextDirectionLB->get_active_id(), RES_FRAMEDIR) ); + } + } + return true; +} + +// update ColumnManager +IMPL_LINK_NOARG( SwColumnPage, UpdateColMgrListBox, weld::ComboBox&, void ) +{ + UpdateColMgr(*m_xLineWidthEdit); +} + +IMPL_LINK_NOARG( SwColumnPage, UpdateColMgrLineBox, SvtLineListBox&, void ) +{ + UpdateColMgr(*m_xLineWidthEdit); +} + +IMPL_LINK_NOARG( SwColumnPage, UpdateColMgrColorBox, ColorListBox&, void ) +{ + UpdateColMgr(*m_xLineWidthEdit); +} + +IMPL_LINK_NOARG( SwColumnPage, UpdateColMgr, weld::MetricSpinButton&, void ) +{ + if (!m_xColMgr) + return; + tools::Long nGutterWidth = m_xColMgr->GetGutterWidth(); + if (m_nCols > 1) + { + // Determine whether the most narrow column is too narrow + // for the adjusted column gap + tools::Long nMin = m_nColWidth[0]; + + for( sal_uInt16 i = 1; i < m_nCols; ++i ) + nMin = std::min(nMin, m_nColWidth[i]); + + bool bAutoWidth = m_xAutoWidthBox->get_active(); + if(!bAutoWidth) + { + m_xColMgr->SetAutoWidth(false); + // when the user didn't allocate the whole width, + // add the missing amount to the last column. + tools::Long nSum = 0; + for(sal_uInt16 i = 0; i < m_nCols; ++i) + nSum += m_nColWidth[i]; + nGutterWidth = 0; + for(sal_uInt16 i = 0; i < m_nCols - 1; ++i) + nGutterWidth += m_nColDist[i]; + nSum += nGutterWidth; + + tools::Long nMaxW = m_xColMgr->GetActualSize(); + + if( nSum < nMaxW ) + m_nColWidth[m_nCols - 1] += nMaxW - nSum; + + m_xColMgr->SetColWidth( 0, static_cast< sal_uInt16 >(m_nColWidth[0] + m_nColDist[0]/2) ); + for( sal_uInt16 i = 1; i < m_nCols-1; ++i ) + { + tools::Long nActDist = (m_nColDist[i] + m_nColDist[i - 1]) / 2; + m_xColMgr->SetColWidth( i, static_cast< sal_uInt16 >(m_nColWidth[i] + nActDist )); + } + m_xColMgr->SetColWidth( m_nCols-1, static_cast< sal_uInt16 >(m_nColWidth[m_nCols-1] + m_nColDist[m_nCols -2]/2) ); + + } + + bool bEnable = isLineNotNone(); + m_xLineHeightEdit->set_sensitive(bEnable); + m_xLineHeightLbl->set_sensitive(bEnable); + m_xLineWidthLbl->set_sensitive(bEnable); + m_xLineWidthEdit->set_sensitive(bEnable); + m_xLineColorDLB->set_sensitive(bEnable); + m_xLineColorLbl->set_sensitive(bEnable); + + sal_Int64 nLineWidth = m_xLineWidthEdit->get_value(FieldUnit::PERCENT); + nLineWidth = static_cast<tools::Long>(vcl::ConvertDoubleValue( + nLineWidth, + m_xLineWidthEdit->get_digits(), + m_xLineWidthEdit->get_unit(), MapUnit::MapTwip )); + if( !bEnable ) + m_xColMgr->SetNoLine(); + else + { + m_xColMgr->SetLineWidthAndColor( + m_xLineTypeDLB->GetSelectEntryStyle(), + nLineWidth, + m_xLineColorDLB->GetSelectEntryColor() ); + m_xColMgr->SetAdjust(SwColLineAdj(m_xLinePosDLB->get_active() + 1)); + m_xColMgr->SetLineHeightPercent(static_cast<short>(m_xLineHeightEdit->get_value(FieldUnit::PERCENT))); + bEnable = m_xColMgr->GetLineHeightPercent() != 100; + } + m_xLinePosLbl->set_sensitive(bEnable); + m_xLinePosDLB->set_sensitive(bEnable); + + //fdo#66815 if the values are going to be the same, don't update + //them to avoid the listbox selection resetting + if (nLineWidth != m_xLineTypeDLB->GetWidth()) + m_xLineTypeDLB->SetWidth(nLineWidth); + Color aColor(m_xLineColorDLB->GetSelectEntryColor()); + if (aColor != m_xLineTypeDLB->GetColor()) + m_xLineTypeDLB->SetColor(aColor); + } + else + { + m_xColMgr->NoCols(); + m_nCols = 0; + } + + //set maximum values + m_xCLNrEdt->set_max(std::max(tools::Long(1), + std::min(tools::Long(nMaxCols), tools::Long(m_xColMgr->GetActualSize() / (nGutterWidth + MINLAY)) ))); + + //prompt example window + if(!m_bLockUpdate) + { + if(m_bFrame) + { + m_aFrameExampleWN.SetColumns(m_xColMgr->GetColumns()); + m_aFrameExampleWN.Invalidate(); + } + else + m_aPgeExampleWN.Invalidate(); + } +} + +void SwColumnPage::Init() +{ + m_xCLNrEdt->set_value(m_nCols); + + bool bAutoWidth = m_xColMgr->IsAutoWidth() || m_bHtmlMode; + m_xAutoWidthBox->set_active(bAutoWidth); + + sal_Int32 nColumnWidthSum = 0; + // set the widths + for(sal_uInt16 i = 0; i < m_nCols; ++i) + { + m_nColWidth[i] = m_xColMgr->GetColWidth(i); + nColumnWidthSum += m_nColWidth[i]; + if(i < m_nCols - 1) + m_nColDist[i] = m_xColMgr->GetGutterWidth(i); + } + + if( 1 < m_nCols ) + { + // #97495# make sure that the automatic column width's are always equal + if(bAutoWidth) + { + nColumnWidthSum /= m_nCols; + for(sal_uInt16 i = 0; i < m_nCols; ++i) + m_nColWidth[i] = nColumnWidthSum; + } + SwColLineAdj eAdj = m_xColMgr->GetAdjust(); + if( COLADJ_NONE == eAdj ) // the dialog doesn't know a NONE! + { + eAdj = COLADJ_TOP; + //without Adjust no line type + m_xLineTypeDLB->SelectEntry(SvxBorderLineStyle::NONE); + m_xLineHeightEdit->set_value(100, FieldUnit::PERCENT); + } + else + { + // Need to multiply by 100 because of the 2 decimals + m_xLineWidthEdit->set_value( m_xColMgr->GetLineWidth() * 100, FieldUnit::TWIP); + m_xLineColorDLB->SelectEntry( m_xColMgr->GetLineColor() ); + m_xLineTypeDLB->SelectEntry( m_xColMgr->GetLineStyle() ); + m_xLineTypeDLB->SetWidth( m_xColMgr->GetLineWidth( ) ); + m_xLineHeightEdit->set_value(m_xColMgr->GetLineHeightPercent(), FieldUnit::PERCENT); + + } + m_xLinePosDLB->set_active( static_cast< sal_Int32 >(eAdj - 1) ); + } + else + { + m_xLinePosDLB->set_active(0); + m_xLineTypeDLB->SelectEntry(SvxBorderLineStyle::NONE); + m_xLineHeightEdit->set_value(100, FieldUnit::PERCENT); + } + + UpdateCols(); + Update(nullptr); + + // set maximum number of columns + // values below 1 are not allowed + m_xCLNrEdt->set_max(std::max(tools::Long(1), + std::min(tools::Long(nMaxCols), tools::Long(m_xColMgr->GetActualSize() / g_nMinWidth) ))); +} + +bool SwColumnPage::isLineNotNone() const +{ + // nothing is turned off + return m_xLineTypeDLB->GetSelectEntryStyle() != SvxBorderLineStyle::NONE; +} + +/* + * The number of columns has changed -- here the controls for editing of the + * columns are en- or disabled according to the column number. In case there are + * more than nVisCols (=3) all Edit are being enabled and the buttons for + * scrolling too. Otherwise Edits are being enabled according to the column + * numbers; one column can not be edited. + */ +void SwColumnPage::UpdateCols() +{ + bool bEnableBtns= false; + bool bEnable12 = false; + bool bEnable3 = false; + const bool bEdit = !m_xAutoWidthBox->get_active(); + if ( m_nCols > nVisCols ) + { + bEnableBtns = !m_bHtmlMode; + bEnable12 = bEnable3 = bEdit; + } + else if( bEdit ) + { + // here are purposely hardly any breaks + switch(m_nCols) + { + case 3: bEnable3 = true; + [[fallthrough]]; + case 2: bEnable12= true; break; + default: /* do nothing */; + } + } + m_xEd1->set_sensitive(bEnable12); + bool bEnable = m_nCols > 1; + m_xDistEd1->set_sensitive(bEnable); + m_xAutoWidthBox->set_sensitive(bEnable && !m_bHtmlMode); + m_xEd2->set_sensitive(bEnable12); + m_xDistEd2->set_sensitive(bEnable3); + m_xEd3->set_sensitive(bEnable3); + m_xLbl1->set_sensitive(bEnable12); + m_xLbl2->set_sensitive(bEnable12); + m_xLbl3->set_sensitive(bEnable3); + m_xBtnBack->set_sensitive(bEnableBtns); + m_xBtnNext->set_sensitive(bEnableBtns); + + m_xLineTypeDLB->set_sensitive( bEnable ); + m_xLineTypeLbl->set_sensitive( bEnable ); + + if (bEnable) + { + bEnable = isLineNotNone(); + } + + //all these depend on > 1 column and line style != none + m_xLineHeightEdit->set_sensitive(bEnable); + m_xLineHeightLbl->set_sensitive(bEnable); + m_xLineWidthLbl->set_sensitive(bEnable); + m_xLineWidthEdit->set_sensitive(bEnable); + m_xLineColorDLB->set_sensitive(bEnable); + m_xLineColorLbl->set_sensitive(bEnable); + + if (bEnable) + bEnable = m_xColMgr->GetLineHeightPercent() != 100; + + //and these additionally depend on line height != 100% + m_xLinePosDLB->set_sensitive(bEnable); + m_xLinePosLbl->set_sensitive(bEnable); +} + +void SwColumnPage::SetLabels( sal_uInt16 nVis ) +{ + //insert ~ before the last character, e.g. 1 -> ~1, 10 -> 1~0 + const OUString sLbl( '~' ); + + const OUString sLbl1(OUString::number( nVis + 1 )); + m_xLbl1->set_label(sLbl1.replaceAt(sLbl1.getLength()-1, 0, sLbl)); + + const OUString sLbl2(OUString::number( nVis + 2 )); + m_xLbl2->set_label(sLbl2.replaceAt(sLbl2.getLength()-1, 0, sLbl)); + + const OUString sLbl3(OUString::number( nVis + 3 )); + m_xLbl3->set_label(sLbl3.replaceAt(sLbl3.getLength()-1, 0, sLbl)); + + const OUString sColumnWidth = SwResId( STR_ACCESS_COLUMN_WIDTH ) ; + m_xEd1->set_accessible_name(sColumnWidth.replaceFirst("%1", sLbl1)); + m_xEd2->set_accessible_name(sColumnWidth.replaceFirst("%1", sLbl2)); + m_xEd3->set_accessible_name(sColumnWidth.replaceFirst("%1", sLbl3)); + + const OUString sDist = SwResId( STR_ACCESS_PAGESETUP_SPACING ) ; + m_xDistEd1->set_accessible_name( + sDist.replaceFirst("%1", sLbl1).replaceFirst("%2", sLbl2)); + + m_xDistEd2->set_accessible_name( + sDist.replaceFirst("%1", sLbl2).replaceFirst("%2", sLbl3)); +} + +/* + * Handler that is called at alteration of the column number. An alteration of + * the column number overwrites potential user's width settings; all columns + * are equally wide. + */ +IMPL_LINK_NOARG(SwColumnPage, ColModify, weld::SpinButton&, void) +{ + ColModify(/*bForceColReset=*/false); +} + +void SwColumnPage::ColModify(bool bForceColReset) +{ + m_nCols = o3tl::narrowing<sal_uInt16>(m_xCLNrEdt->get_value()); + //#107890# the handler is also called from LoseFocus() + //then no change has been made and thus no action should be taken + // #i17816# changing the displayed types within the ValueSet + //from two columns to two columns with different settings doesn't invalidate the + // example windows in ::ColModify() + if (!bForceColReset && m_xColMgr->GetCount() == m_nCols) + return; + + if (!bForceColReset) + m_aDefaultVS.SetNoSelection(); + tools::Long nDist = static_cast< tools::Long >(m_xDistEd1->DenormalizePercent(m_xDistEd1->get_value(FieldUnit::TWIP))); + m_xColMgr->SetCount(m_nCols, o3tl::narrowing<sal_uInt16>(nDist)); + for(sal_uInt16 i = 0; i < m_nCols; i++) + m_nColDist[i] = nDist; + m_nFirstVis = 0; + SetLabels( m_nFirstVis ); + UpdateCols(); + ResetColWidth(); + Update(nullptr); +} + +/* + * Modify handler for an alteration of the column width or the column gap. + * These changes take effect time-displaced. With an alteration of the column + * width the automatic calculation of the column width is overruled; only an + * alteration of the column number leads back to that default. + */ +IMPL_LINK(SwColumnPage, GapModify, weld::MetricSpinButton&, rMetricField, void) +{ + if (m_nCols < 2) + return; + SwPercentField *pField = m_aPercentFieldsMap[&rMetricField]; + assert(pField); + tools::Long nActValue = static_cast< tools::Long >(pField->DenormalizePercent(pField->get_value(FieldUnit::TWIP))); + if (m_xAutoWidthBox->get_active()) + { + const tools::Long nMaxGap = static_cast< tools::Long > + ((m_xColMgr->GetActualSize() - m_nCols * MINLAY)/(m_nCols - 1)); + if(nActValue > nMaxGap) + { + nActValue = nMaxGap; + m_xDistEd1->set_value(m_xDistEd1->NormalizePercent(nMaxGap), FieldUnit::TWIP); + } + m_xColMgr->SetGutterWidth(o3tl::narrowing<sal_uInt16>(nActValue)); + for(sal_uInt16 i = 0; i < m_nCols; i++) + m_nColDist[i] = nActValue; + + ResetColWidth(); + UpdateCols(); + } + else + { + const sal_uInt16 nVis = m_nFirstVis + ((pField == m_xDistEd2.get()) ? 1 : 0); + tools::Long nDiff = nActValue - m_nColDist[nVis]; + if(nDiff) + { + tools::Long nLeft = m_nColWidth[nVis]; + tools::Long nRight = m_nColWidth[nVis + 1]; + if(nLeft + nRight + 2 * MINLAY < nDiff) + nDiff = nLeft + nRight - 2 * MINLAY; + if(nDiff < nRight - MINLAY) + { + nRight -= nDiff; + } + else + { + tools::Long nTemp = nDiff - nRight + MINLAY; + nRight = MINLAY; + if(nLeft > nTemp - MINLAY) + { + nLeft -= nTemp; + nTemp = 0; + } + else + { + nTemp -= nLeft + MINLAY; + nLeft = MINLAY; + } + nDiff = nTemp; + } + m_nColWidth[nVis] = nLeft; + m_nColWidth[nVis + 1] = nRight; + m_nColDist[nVis] += nDiff; + + m_xColMgr->SetColWidth( nVis, sal_uInt16(nLeft) ); + m_xColMgr->SetColWidth( nVis + 1, sal_uInt16(nRight) ); + m_xColMgr->SetGutterWidth( sal_uInt16(m_nColDist[nVis]), nVis ); + } + + } + Update(&rMetricField); +} + +IMPL_LINK(SwColumnPage, EdModify, weld::MetricSpinButton&, rEdit, void) +{ + SwPercentField *pField = m_aPercentFieldsMap[&rEdit]; + assert(pField); + m_pModifiedField = pField; + Timeout(); +} + +// Handler behind the Checkbox for automatic width. When the box is checked +// no explicit values for the column width can be entered. +IMPL_LINK(SwColumnPage, AutoWidthHdl, weld::Toggleable&, rBox, void) +{ + tools::Long nDist = static_cast< tools::Long >(m_xDistEd1->DenormalizePercent(m_xDistEd1->get_value(FieldUnit::TWIP))); + m_xColMgr->SetCount(m_nCols, o3tl::narrowing<sal_uInt16>(nDist)); + for(sal_uInt16 i = 0; i < m_nCols; i++) + m_nColDist[i] = nDist; + if (rBox.get_active()) + { + m_xColMgr->SetGutterWidth(sal_uInt16(nDist)); + ResetColWidth(); + } + m_xColMgr->SetAutoWidth(rBox.get_active(), sal_uInt16(nDist)); + UpdateCols(); + Update(nullptr); +} + +// scroll up the contents of the edits +IMPL_LINK_NOARG(SwColumnPage, Up, weld::Button&, void) +{ + if( m_nFirstVis ) + { + --m_nFirstVis; + SetLabels( m_nFirstVis ); + Update(nullptr); + } +} + +// scroll down the contents of the edits. +IMPL_LINK_NOARG(SwColumnPage, Down, weld::Button&, void) +{ + if( m_nFirstVis + nVisCols < m_nCols ) + { + ++m_nFirstVis; + SetLabels( m_nFirstVis ); + Update(nullptr); + } +} + +// relict from ancient times - now directly without time handler; triggered by +// an alteration of the column width or the column gap. +void SwColumnPage::Timeout() +{ + SwPercentField *pField = m_pModifiedField; + if (m_pModifiedField) + { + // find the changed column + sal_uInt16 nChanged = m_nFirstVis; + if (m_pModifiedField == m_xEd2.get()) + ++nChanged; + else if (m_pModifiedField == m_xEd3.get()) + nChanged += 2; + + tools::Long nNewWidth = static_cast< tools::Long > + (m_pModifiedField->DenormalizePercent(m_pModifiedField->get_value(FieldUnit::TWIP))); + tools::Long nDiff = nNewWidth - m_nColWidth[nChanged]; + + // when it's the last column + if(nChanged == m_nCols - 1) + { + m_nColWidth[0] -= nDiff; + if(m_nColWidth[0] < static_cast<tools::Long>(g_nMinWidth)) + { + nNewWidth -= g_nMinWidth - m_nColWidth[0]; + m_nColWidth[0] = g_nMinWidth; + } + + } + else if(nDiff) + { + m_nColWidth[nChanged + 1] -= nDiff; + if(m_nColWidth[nChanged + 1] < static_cast<tools::Long>(g_nMinWidth)) + { + nNewWidth -= g_nMinWidth - m_nColWidth[nChanged + 1]; + m_nColWidth[nChanged + 1] = g_nMinWidth; + } + } + m_nColWidth[nChanged] = nNewWidth; + m_pModifiedField = nullptr; + } + + Update(pField ? pField->get() : nullptr); +} + +// Update the view +void SwColumnPage::Update(const weld::MetricSpinButton* pInteractiveField) +{ + m_xBalanceColsCB->set_sensitive(m_nCols > 1); + if(m_nCols >= 2) + { + sal_Int64 nCurrentValue, nNewValue; + + nCurrentValue = m_xEd1->NormalizePercent(m_xEd1->DenormalizePercent(m_xEd1->get_value(FieldUnit::TWIP))); + nNewValue = m_xEd1->NormalizePercent(m_nColWidth[m_nFirstVis]); + + //fdo#87612 if we're interacting with this widget and the value will be the same + //then leave it alone (i.e. don't change equivalent values of e.g. .8 -> 0.8) + if (nNewValue != nCurrentValue || pInteractiveField != m_xEd1->get()) + m_xEd1->set_value(nNewValue, FieldUnit::TWIP); + + nCurrentValue = m_xDistEd1->NormalizePercent(m_xDistEd1->DenormalizePercent(m_xDistEd1->get_value(FieldUnit::TWIP))); + nNewValue = m_xDistEd1->NormalizePercent(m_nColDist[m_nFirstVis]); + if (nNewValue != nCurrentValue || pInteractiveField != m_xDistEd1->get()) + m_xDistEd1->set_value(nNewValue, FieldUnit::TWIP); + + nCurrentValue = m_xEd2->NormalizePercent(m_xEd2->DenormalizePercent(m_xEd2->get_value(FieldUnit::TWIP))); + nNewValue = m_xEd2->NormalizePercent(m_nColWidth[m_nFirstVis+1]); + if (nNewValue != nCurrentValue || pInteractiveField != m_xEd2->get()) + m_xEd2->set_value(nNewValue, FieldUnit::TWIP); + + if(m_nCols >= 3) + { + nCurrentValue = m_xDistEd2->NormalizePercent(m_xDistEd2->DenormalizePercent(m_xDistEd2->get_value(FieldUnit::TWIP))); + nNewValue = m_xDistEd2->NormalizePercent(m_nColDist[m_nFirstVis+1]); + if (nNewValue != nCurrentValue || pInteractiveField != m_xDistEd2->get()) + m_xDistEd2->set_value(nNewValue, FieldUnit::TWIP); + + nCurrentValue = m_xEd3->NormalizePercent(m_xEd3->DenormalizePercent(m_xEd3->get_value(FieldUnit::TWIP))); + nNewValue = m_xEd3->NormalizePercent(m_nColWidth[m_nFirstVis+2]); + if (nNewValue != nCurrentValue || pInteractiveField != m_xEd3->get()) + m_xEd3->set_value(nNewValue, FieldUnit::TWIP); + } + else + { + m_xEd3->set_text(OUString()); + m_xDistEd2->set_text(OUString()); + } + } + else + { + m_xEd1->set_text(OUString()); + m_xEd2->set_text(OUString()); + m_xEd3->set_text(OUString()); + m_xDistEd1->set_text(OUString()); + m_xDistEd2->set_text(OUString()); + } + UpdateColMgr(*m_xLineWidthEdit); +} + +// Update Bsp +void SwColumnPage::ActivatePage(const SfxItemSet& rSet) +{ + bool bVertical = false; + if (SfxItemState::DEFAULT <= rSet.GetItemState(RES_FRAMEDIR)) + { + const SvxFrameDirectionItem& rDirItem = + rSet.Get(RES_FRAMEDIR); + bVertical = rDirItem.GetValue() == SvxFrameDirection::Vertical_RL_TB|| + rDirItem.GetValue() == SvxFrameDirection::Vertical_LR_TB; + } + + if (!m_bFrame) + { + if( SfxItemState::SET == rSet.GetItemState( SID_ATTR_PAGE_SIZE )) + { + const SvxSizeItem& rSize = rSet.Get(SID_ATTR_PAGE_SIZE); + + sal_uInt16 nActWidth; + + if (!bVertical) + { + const SvxLRSpaceItem& rLRSpace = rSet.Get(RES_LR_SPACE); + const SvxBoxItem& rBox = rSet.Get(RES_BOX); + nActWidth = rSize.GetSize().Width() + - rLRSpace.GetLeft() - rLRSpace.GetRight() - rBox.GetSmallestDistance(); + } + else + { + const SvxULSpaceItem& rULSpace = rSet.Get( RES_UL_SPACE ); + const SvxBoxItem& rBox = rSet.Get(RES_BOX); + nActWidth = rSize.GetSize().Height() + - rULSpace.GetUpper() - rULSpace.GetLower() - rBox.GetSmallestDistance(); + + } + + if( m_xColMgr->GetActualSize() != nActWidth) + { + m_xColMgr->SetActualWidth(nActWidth); + ColModify(/*bForceColReset=*/false); + UpdateColMgr( *m_xLineWidthEdit ); + } + } + m_xFrameExampleWN->hide(); + m_aPgeExampleWN.UpdateExample(rSet, m_xColMgr.get()); + m_xPgeExampleWN->show(); + + } + else + { + m_xPgeExampleWN->hide(); + m_xFrameExampleWN->show(); + + // Size + const SwFormatFrameSize& rSize = rSet.Get(RES_FRM_SIZE); + const SvxBoxItem& rBox = rSet.Get(RES_BOX); + + sal_uInt16 nTotalWish; + if (m_bFormat) + nTotalWish = FRAME_FORMAT_WIDTH; + else + { + tools::Long const nDistance = rBox.GetSmallestDistance(); + nTotalWish = (!bVertical ? rSize.GetWidth() : rSize.GetHeight()) - 2 * nDistance; + } + + // set maximum values of column width + SetPageWidth(nTotalWish); + + if(m_xColMgr->GetActualSize() != nTotalWish) + { + m_xColMgr->SetActualWidth(nTotalWish); + Init(); + } + bool bPercent; + // only relative data in frame format + if ( m_bFormat || (rSize.GetWidthPercent() && rSize.GetWidthPercent() != SwFormatFrameSize::SYNCED) ) + { + // set value for 100% + m_xEd1->SetRefValue(nTotalWish); + m_xEd2->SetRefValue(nTotalWish); + m_xEd3->SetRefValue(nTotalWish); + m_xDistEd1->SetRefValue(nTotalWish); + m_xDistEd2->SetRefValue(nTotalWish); + + // switch to %-view + bPercent = true; + } + else + bPercent = false; + + m_xEd1->ShowPercent(bPercent); + m_xEd2->ShowPercent(bPercent); + m_xEd3->ShowPercent(bPercent); + m_xDistEd1->ShowPercent(bPercent); + m_xDistEd2->ShowPercent(bPercent); + m_xDistEd1->SetMetricFieldMin(0); + m_xDistEd2->SetMetricFieldMin(0); + } + Update(nullptr); +} + +DeactivateRC SwColumnPage::DeactivatePage(SfxItemSet *_pSet) +{ + if(_pSet) + FillItemSet(_pSet); + + return DeactivateRC::LeavePage; +} + +IMPL_LINK(SwColumnPage, SetDefaultsHdl, ValueSet *, pVS, void) +{ + const sal_uInt16 nItem = pVS->GetSelectedItemId(); + if( nItem < 4 ) + { + m_xCLNrEdt->set_value(nItem); + m_xAutoWidthBox->set_active(true); + m_xDistEd1->set_value(50, FieldUnit::CM); + ColModify(/*bForceColReset=*/true); + } + else + { + m_bLockUpdate = true; + m_xCLNrEdt->set_value(2); + m_xAutoWidthBox->set_active(false); + m_xDistEd1->set_value(50, FieldUnit::CM); + ColModify(/*bForceColReset=*/true); + // now set the width ratio to 2 : 1 or 1 : 2 respectively + const tools::Long nSmall = static_cast< tools::Long >(m_xColMgr->GetActualSize() / 3); + if(nItem == 4) + { + m_xEd2->set_value(m_xEd2->NormalizePercent(nSmall), FieldUnit::TWIP); + m_pModifiedField = m_xEd2.get(); + } + else + { + m_xEd1->set_value(m_xEd1->NormalizePercent(nSmall), FieldUnit::TWIP); + m_pModifiedField = m_xEd1.get(); + } + m_bLockUpdate = false; + Timeout(); + + } +} + +void SwColumnPage::SetFrameMode(bool bMod) +{ + m_bFrame = bMod; +} + +void SwColumnPage::SetInSection(bool bSet) +{ + if(!SW_MOD()->GetCTLOptions().IsCTLFontEnabled()) + return; + + m_xTextDirectionFT->set_visible(bSet); + m_xTextDirectionLB->set_visible(bSet); +} + +void ColumnValueSet::UserDraw(const UserDrawEvent& rUDEvt) +{ + vcl::RenderContext* pDev = rUDEvt.GetRenderContext(); + const StyleSettings& rStyleSettings = Application::GetSettings().GetStyleSettings(); + + tools::Rectangle aRect = rUDEvt.GetRect(); + const sal_uInt16 nItemId = rUDEvt.GetItemId(); + tools::Long nRectWidth = aRect.GetWidth(); + tools::Long nRectHeight = aRect.GetHeight(); + + Point aBLPos = aRect.TopLeft(); + Color aFillColor(pDev->GetFillColor()); + Color aLineColor(pDev->GetLineColor()); + pDev->SetFillColor(rStyleSettings.GetFieldColor()); + pDev->SetLineColor(rStyleSettings.GetFieldTextColor()); + + tools::Long nStep = std::abs(std::abs(nRectHeight * 95 /100) / 11); + tools::Long nTop = (nRectHeight - 11 * nStep ) / 2; + sal_uInt16 nCols = 0; + tools::Long nStarts[3]; + tools::Long nEnds[3]; + nStarts[0] = nRectWidth * 10 / 100; + switch( nItemId ) + { + case 1: + nEnds[0] = nRectWidth * 9 / 10; + nCols = 1; + break; + case 2: nCols = 2; + nEnds[0] = nRectWidth * 45 / 100; + nStarts[1] = nEnds[0] + nStep; + nEnds[1] = nRectWidth * 9 / 10; + break; + case 3: nCols = 3; + nEnds[0] = nRectWidth * 30 / 100; + nStarts[1] = nEnds[0] + nStep; + nEnds[1] = nRectWidth * 63 / 100; + nStarts[2] = nEnds[1] + nStep; + nEnds[2] = nRectWidth * 9 / 10; + break; + case 4: nCols = 2; + nEnds[0] = nRectWidth * 63 / 100; + nStarts[1] = nEnds[0] + nStep; + nEnds[1] = nRectWidth * 9 / 10; + break; + case 5: nCols = 2; + nEnds[0] = nRectWidth * 30 / 100; + nStarts[1] = nEnds[0] + nStep; + nEnds[1] = nRectWidth * 9 / 10; + break; + } + for(sal_uInt16 j = 0; j < nCols; j++ ) + { + Point aStart(aBLPos.X() + nStarts[j], 0); + Point aEnd(aBLPos.X() + nEnds[j], 0); + for( sal_uInt16 i = 0; i < 12; i ++) + { + aStart.setY( aBLPos.Y() + nTop + i * nStep); + aEnd.setY( aStart.Y() ); + pDev->DrawLine(aStart, aEnd); + } + } + pDev->SetFillColor(aFillColor); + pDev->SetLineColor(aLineColor); +} + +void ColumnValueSet::StyleUpdated() +{ + SetFormat(); + Invalidate(); + ValueSet::StyleUpdated(); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |