diff options
Diffstat (limited to 'vcl/source/outdev/hatch.cxx')
| -rw-r--r-- | vcl/source/outdev/hatch.cxx | 442 |
1 files changed, 442 insertions, 0 deletions
diff --git a/vcl/source/outdev/hatch.cxx b/vcl/source/outdev/hatch.cxx new file mode 100644 index 000000000..9ae44a563 --- /dev/null +++ b/vcl/source/outdev/hatch.cxx @@ -0,0 +1,442 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <cassert> +#include <cstdlib> + +#include <osl/diagnose.h> +#include <tools/line.hxx> +#include <tools/helpers.hxx> + +#include <unotools/configmgr.hxx> + +#include <vcl/hatch.hxx> +#include <vcl/metaact.hxx> +#include <vcl/settings.hxx> +#include <vcl/outdev.hxx> +#include <vcl/virdev.hxx> + +#include <drawmode.hxx> +#include <salgdi.hxx> + +#include <memory> + +#define HATCH_MAXPOINTS 1024 + +extern "C" { + +static int HatchCmpFnc( const void* p1, const void* p2 ) +{ + const tools::Long nX1 = static_cast<Point const *>(p1)->X(); + const tools::Long nX2 = static_cast<Point const *>(p2)->X(); + const tools::Long nY1 = static_cast<Point const *>(p1)->Y(); + const tools::Long nY2 = static_cast<Point const *>(p2)->Y(); + + return ( nX1 > nX2 ? 1 : nX1 == nX2 ? nY1 > nY2 ? 1: nY1 == nY2 ? 0 : -1 : -1 ); +} + +} + +void OutputDevice::DrawHatch( const tools::PolyPolygon& rPolyPoly, const Hatch& rHatch ) +{ + assert(!is_double_buffered_window()); + + Hatch aHatch( rHatch ); + aHatch.SetColor(vcl::drawmode::GetHatchColor(rHatch.GetColor(), GetDrawMode(), GetSettings().GetStyleSettings())); + + if( mpMetaFile ) + mpMetaFile->AddAction( new MetaHatchAction( rPolyPoly, aHatch ) ); + + if( !IsDeviceOutputNecessary() || ImplIsRecordLayout() ) + return; + + if( !mpGraphics && !AcquireGraphics() ) + return; + assert(mpGraphics); + + if( mbInitClipRegion ) + InitClipRegion(); + + if( mbOutputClipped ) + return; + + if( rPolyPoly.Count() ) + { + tools::PolyPolygon aPolyPoly( LogicToPixel( rPolyPoly ) ); + GDIMetaFile* pOldMetaFile = mpMetaFile; + bool bOldMap = mbMap; + + aPolyPoly.Optimize( PolyOptimizeFlags::NO_SAME ); + aHatch.SetDistance( ImplLogicWidthToDevicePixel( aHatch.GetDistance() ) ); + + mpMetaFile = nullptr; + EnableMapMode( false ); + Push( vcl::PushFlags::LINECOLOR ); + SetLineColor( aHatch.GetColor() ); + InitLineColor(); + DrawHatch( aPolyPoly, aHatch, false ); + Pop(); + EnableMapMode( bOldMap ); + mpMetaFile = pOldMetaFile; + } + + if( mpAlphaVDev ) + mpAlphaVDev->DrawHatch( rPolyPoly, rHatch ); +} + +void OutputDevice::AddHatchActions( const tools::PolyPolygon& rPolyPoly, const Hatch& rHatch, + GDIMetaFile& rMtf ) +{ + + tools::PolyPolygon aPolyPoly( rPolyPoly ); + aPolyPoly.Optimize( PolyOptimizeFlags::NO_SAME | PolyOptimizeFlags::CLOSE ); + + if( aPolyPoly.Count() ) + { + GDIMetaFile* pOldMtf = mpMetaFile; + + mpMetaFile = &rMtf; + mpMetaFile->AddAction( new MetaPushAction( vcl::PushFlags::ALL ) ); + mpMetaFile->AddAction( new MetaLineColorAction( rHatch.GetColor(), true ) ); + DrawHatch( aPolyPoly, rHatch, true ); + mpMetaFile->AddAction( new MetaPopAction() ); + mpMetaFile = pOldMtf; + } +} + +static bool HasSaneNSteps(const Point& rPt1, const Point& rEndPt1, const Size& rInc) +{ + tools::Long nVertSteps = -1; + if (rInc.Height()) + { + bool bFail = o3tl::checked_sub(rEndPt1.Y(), rPt1.Y(), nVertSteps); + if (bFail) + nVertSteps = std::numeric_limits<tools::Long>::max(); + else + nVertSteps = nVertSteps / rInc.Height(); + } + tools::Long nHorzSteps = -1; + if (rInc.Width()) + { + bool bFail = o3tl::checked_sub(rEndPt1.X(), rPt1.X(), nHorzSteps); + if (bFail) + nHorzSteps = std::numeric_limits<tools::Long>::max(); + else + nHorzSteps = nHorzSteps / rInc.Width(); + } + auto nSteps = std::max(nVertSteps, nHorzSteps); + if (nSteps > 1024) + { + SAL_WARN("vcl.gdi", "skipping slow hatch with " << nSteps << " steps"); + return false; + } + return true; +} + +void OutputDevice::DrawHatch( const tools::PolyPolygon& rPolyPoly, const Hatch& rHatch, bool bMtf ) +{ + assert(!is_double_buffered_window()); + + if(!rPolyPoly.Count()) + return; + + // #i115630# DrawHatch does not work with beziers included in the polypolygon, take care of that + bool bIsCurve(false); + + for(sal_uInt16 a(0); !bIsCurve && a < rPolyPoly.Count(); a++) + { + if(rPolyPoly[a].HasFlags()) + { + bIsCurve = true; + } + } + + if(bIsCurve) + { + OSL_ENSURE(false, "DrawHatch does *not* support curves, falling back to AdaptiveSubdivide()..."); + tools::PolyPolygon aPolyPoly; + + rPolyPoly.AdaptiveSubdivide(aPolyPoly); + DrawHatch(aPolyPoly, rHatch, bMtf); + } + else + { + tools::Rectangle aRect( rPolyPoly.GetBoundRect() ); + const tools::Long nLogPixelWidth = ImplDevicePixelToLogicWidth( 1 ); + const tools::Long nWidth = ImplDevicePixelToLogicWidth( std::max( ImplLogicWidthToDevicePixel( rHatch.GetDistance() ), tools::Long(3) ) ); + std::unique_ptr<Point[]> pPtBuffer(new Point[ HATCH_MAXPOINTS ]); + Point aPt1, aPt2, aEndPt1; + Size aInc; + + // Single hatch + aRect.AdjustLeft( -nLogPixelWidth ); aRect.AdjustTop( -nLogPixelWidth ); aRect.AdjustRight(nLogPixelWidth ); aRect.AdjustBottom(nLogPixelWidth ); + CalcHatchValues( aRect, nWidth, rHatch.GetAngle(), aPt1, aPt2, aInc, aEndPt1 ); + if (utl::ConfigManager::IsFuzzing() && !HasSaneNSteps(aPt1, aEndPt1, aInc)) + return; + + if (aInc.Width() <= 0 && aInc.Height() <= 0) + SAL_WARN("vcl.gdi", "invalid increment"); + else + { + do + { + DrawHatchLine( tools::Line( aPt1, aPt2 ), rPolyPoly, pPtBuffer.get(), bMtf ); + aPt1.AdjustX(aInc.Width() ); aPt1.AdjustY(aInc.Height() ); + aPt2.AdjustX(aInc.Width() ); aPt2.AdjustY(aInc.Height() ); + } + while( ( aPt1.X() <= aEndPt1.X() ) && ( aPt1.Y() <= aEndPt1.Y() ) ); + } + + if( ( rHatch.GetStyle() == HatchStyle::Double ) || ( rHatch.GetStyle() == HatchStyle::Triple ) ) + { + // Double hatch + CalcHatchValues( aRect, nWidth, rHatch.GetAngle() + 900_deg10, aPt1, aPt2, aInc, aEndPt1 ); + if (utl::ConfigManager::IsFuzzing() && !HasSaneNSteps(aPt1, aEndPt1, aInc)) + return; + + do + { + DrawHatchLine( tools::Line( aPt1, aPt2 ), rPolyPoly, pPtBuffer.get(), bMtf ); + aPt1.AdjustX(aInc.Width() ); aPt1.AdjustY(aInc.Height() ); + aPt2.AdjustX(aInc.Width() ); aPt2.AdjustY(aInc.Height() ); + } + while( ( aPt1.X() <= aEndPt1.X() ) && ( aPt1.Y() <= aEndPt1.Y() ) ); + + if( rHatch.GetStyle() == HatchStyle::Triple ) + { + // Triple hatch + CalcHatchValues( aRect, nWidth, rHatch.GetAngle() + 450_deg10, aPt1, aPt2, aInc, aEndPt1 ); + if (utl::ConfigManager::IsFuzzing() && !HasSaneNSteps(aPt1, aEndPt1, aInc)) + return; + + do + { + DrawHatchLine( tools::Line( aPt1, aPt2 ), rPolyPoly, pPtBuffer.get(), bMtf ); + aPt1.AdjustX(aInc.Width() ); aPt1.AdjustY(aInc.Height() ); + aPt2.AdjustX(aInc.Width() ); aPt2.AdjustY(aInc.Height() ); + } + while( ( aPt1.X() <= aEndPt1.X() ) && ( aPt1.Y() <= aEndPt1.Y() ) ); + } + } + } +} + +void OutputDevice::CalcHatchValues( const tools::Rectangle& rRect, tools::Long nDist, Degree10 nAngle10, + Point& rPt1, Point& rPt2, Size& rInc, Point& rEndPt1 ) +{ + Point aRef; + Degree10 nAngle = nAngle10 % 1800_deg10; + tools::Long nOffset = 0; + + if( nAngle > 900_deg10 ) + nAngle -= 1800_deg10; + + aRef = ( !IsRefPoint() ? rRect.TopLeft() : GetRefPoint() ); + + if( 0_deg10 == nAngle ) + { + rInc = Size( 0, nDist ); + rPt1 = rRect.TopLeft(); + rPt2 = rRect.TopRight(); + rEndPt1 = rRect.BottomLeft(); + + if( aRef.Y() <= rRect.Top() ) + nOffset = ( ( rRect.Top() - aRef.Y() ) % nDist ); + else + nOffset = ( nDist - ( ( aRef.Y() - rRect.Top() ) % nDist ) ); + + rPt1.AdjustY( -nOffset ); + rPt2.AdjustY( -nOffset ); + } + else if( 900_deg10 == nAngle ) + { + rInc = Size( nDist, 0 ); + rPt1 = rRect.TopLeft(); + rPt2 = rRect.BottomLeft(); + rEndPt1 = rRect.TopRight(); + + if( aRef.X() <= rRect.Left() ) + nOffset = ( rRect.Left() - aRef.X() ) % nDist; + else + nOffset = nDist - ( ( aRef.X() - rRect.Left() ) % nDist ); + + rPt1.AdjustX( -nOffset ); + rPt2.AdjustX( -nOffset ); + } + else if( nAngle >= Degree10(-450) && nAngle <= 450_deg10 ) + { + const double fAngle = std::abs( toRadians(nAngle) ); + const double fTan = tan( fAngle ); + const tools::Long nYOff = FRound( ( rRect.Right() - rRect.Left() ) * fTan ); + tools::Long nPY; + + nDist = FRound( nDist / cos( fAngle ) ); + rInc = Size( 0, nDist ); + + if( nAngle > 0_deg10 ) + { + rPt1 = rRect.TopLeft(); + rPt2 = Point( rRect.Right(), rRect.Top() - nYOff ); + rEndPt1 = Point( rRect.Left(), rRect.Bottom() + nYOff ); + nPY = FRound( aRef.Y() - ( ( rPt1.X() - aRef.X() ) * fTan ) ); + } + else + { + rPt1 = rRect.TopRight(); + rPt2 = Point( rRect.Left(), rRect.Top() - nYOff ); + rEndPt1 = Point( rRect.Right(), rRect.Bottom() + nYOff ); + nPY = FRound( aRef.Y() + ( ( rPt1.X() - aRef.X() ) * fTan ) ); + } + + if( nPY <= rPt1.Y() ) + nOffset = ( rPt1.Y() - nPY ) % nDist; + else + nOffset = nDist - ( ( nPY - rPt1.Y() ) % nDist ); + + rPt1.AdjustY( -nOffset ); + rPt2.AdjustY( -nOffset ); + } + else + { + const double fAngle = std::abs( toRadians(nAngle) ); + const double fTan = tan( fAngle ); + const tools::Long nXOff = FRound( ( rRect.Bottom() - rRect.Top() ) / fTan ); + tools::Long nPX; + + nDist = FRound( nDist / sin( fAngle ) ); + rInc = Size( nDist, 0 ); + + if( nAngle > 0_deg10 ) + { + rPt1 = rRect.TopLeft(); + rPt2 = Point( rRect.Left() - nXOff, rRect.Bottom() ); + rEndPt1 = Point( rRect.Right() + nXOff, rRect.Top() ); + nPX = FRound( aRef.X() - ( ( rPt1.Y() - aRef.Y() ) / fTan ) ); + } + else + { + rPt1 = rRect.BottomLeft(); + rPt2 = Point( rRect.Left() - nXOff, rRect.Top() ); + rEndPt1 = Point( rRect.Right() + nXOff, rRect.Bottom() ); + nPX = FRound( aRef.X() + ( ( rPt1.Y() - aRef.Y() ) / fTan ) ); + } + + if( nPX <= rPt1.X() ) + nOffset = ( rPt1.X() - nPX ) % nDist; + else + nOffset = nDist - ( ( nPX - rPt1.X() ) % nDist ); + + rPt1.AdjustX( -nOffset ); + rPt2.AdjustX( -nOffset ); + } +} + +void OutputDevice::DrawHatchLine( const tools::Line& rLine, const tools::PolyPolygon& rPolyPoly, + Point* pPtBuffer, bool bMtf ) +{ + assert(!is_double_buffered_window()); + + double fX, fY; + tools::Long nAdd, nPCounter = 0; + + for( tools::Long nPoly = 0, nPolyCount = rPolyPoly.Count(); nPoly < nPolyCount; nPoly++ ) + { + const tools::Polygon& rPoly = rPolyPoly[ static_cast<sal_uInt16>(nPoly) ]; + + if( rPoly.GetSize() > 1 ) + { + tools::Line aCurSegment( rPoly[ 0 ], Point() ); + + for( tools::Long i = 1, nCount = rPoly.GetSize(); i <= nCount; i++ ) + { + aCurSegment.SetEnd( rPoly[ static_cast<sal_uInt16>( i % nCount ) ] ); + nAdd = 0; + + if( rLine.Intersection( aCurSegment, fX, fY ) ) + { + if( ( fabs( fX - aCurSegment.GetStart().X() ) <= 0.0000001 ) && + ( fabs( fY - aCurSegment.GetStart().Y() ) <= 0.0000001 ) ) + { + const tools::Line aPrevSegment( rPoly[ static_cast<sal_uInt16>( ( i > 1 ) ? ( i - 2 ) : ( nCount - 1 ) ) ], aCurSegment.GetStart() ); + const double fPrevDistance = rLine.GetDistance( aPrevSegment.GetStart() ); + const double fCurDistance = rLine.GetDistance( aCurSegment.GetEnd() ); + + if( ( fPrevDistance <= 0.0 && fCurDistance > 0.0 ) || + ( fPrevDistance > 0.0 && fCurDistance < 0.0 ) ) + { + nAdd = 1; + } + } + else if( ( fabs( fX - aCurSegment.GetEnd().X() ) <= 0.0000001 ) && + ( fabs( fY - aCurSegment.GetEnd().Y() ) <= 0.0000001 ) ) + { + const tools::Line aNextSegment( aCurSegment.GetEnd(), rPoly[ static_cast<sal_uInt16>( ( i + 1 ) % nCount ) ] ); + + if( ( fabs( rLine.GetDistance( aNextSegment.GetEnd() ) ) <= 0.0000001 ) && + ( rLine.GetDistance( aCurSegment.GetStart() ) > 0.0 ) ) + { + nAdd = 1; + } + } + else + nAdd = 1; + + if( nAdd ) + { + if (nPCounter == HATCH_MAXPOINTS) + { + SAL_WARN("vcl.gdi", "too many hatch points"); + return; + } + pPtBuffer[ nPCounter++ ] = Point( FRound( fX ), FRound( fY ) ); + } + } + + aCurSegment.SetStart( aCurSegment.GetEnd() ); + } + } + } + + if( nPCounter <= 1 ) + return; + + qsort( pPtBuffer, nPCounter, sizeof( Point ), HatchCmpFnc ); + + if( nPCounter & 1 ) + nPCounter--; + + if( bMtf ) + { + for( tools::Long i = 0; i < nPCounter; i += 2 ) + mpMetaFile->AddAction( new MetaLineAction( pPtBuffer[ i ], pPtBuffer[ i + 1 ] ) ); + } + else + { + for( tools::Long i = 0; i < nPCounter; i += 2 ) + DrawHatchLine_DrawLine(pPtBuffer[i], pPtBuffer[i+1]); + } +} + +void OutputDevice::DrawHatchLine_DrawLine(const Point& rStartPoint, const Point& rEndPoint) +{ + Point aPt1{ImplLogicToDevicePixel(rStartPoint)}, aPt2{ImplLogicToDevicePixel(rEndPoint)}; + mpGraphics->DrawLine(aPt1.X(), aPt1.Y(), aPt2.X(), aPt2.Y(), *this); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |