From ed5640d8b587fbcfed7dd7967f3de04b37a76f26 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 11:06:44 +0200 Subject: Adding upstream version 4:7.4.7. Signed-off-by: Daniel Baumann --- chart2/source/view/main/ShapeFactory.cxx | 2551 ++++++++++++++++++++++++++++++ 1 file changed, 2551 insertions(+) create mode 100644 chart2/source/view/main/ShapeFactory.cxx (limited to 'chart2/source/view/main/ShapeFactory.cxx') diff --git a/chart2/source/view/main/ShapeFactory.cxx b/chart2/source/view/main/ShapeFactory.cxx new file mode 100644 index 000000000..7fddc5d01 --- /dev/null +++ b/chart2/source/view/main/ShapeFactory.cxx @@ -0,0 +1,2551 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +using namespace ::com::sun::star; +using ::com::sun::star::uno::Reference; + +namespace chart +{ + +namespace +{ + +void lcl_addProperty(uno::Sequence & rPropertyNames, uno::Sequence & rPropertyValues, + OUString const & rName, uno::Any const & rAny) +{ + rPropertyNames.realloc(rPropertyNames.getLength() + 1); + rPropertyNames.getArray()[rPropertyNames.getLength() - 1] = rName; + + rPropertyValues.realloc(rPropertyValues.getLength() + 1); + rPropertyValues.getArray()[rPropertyValues.getLength() - 1] = rAny; +} + +css::drawing::PolyPolygonShape3D toPolyPolygonShape3D(const std::vector>& rPoints) +{ + css::drawing::PolyPolygonShape3D aUnoPoly; + aUnoPoly.SequenceX.realloc(rPoints.size()); + aUnoPoly.SequenceY.realloc(rPoints.size()); + aUnoPoly.SequenceZ.realloc(rPoints.size()); + for (std::size_t nPolygonIndex=0; nPolygonIndexrealloc(rPoints[nPolygonIndex].size()); + pOuterSequenceY->realloc(rPoints[nPolygonIndex].size()); + pOuterSequenceZ->realloc(rPoints[nPolygonIndex].size()); + double* pInnerSequenceX = pOuterSequenceX->getArray(); + double* pInnerSequenceY = pOuterSequenceY->getArray(); + double* pInnerSequenceZ = pOuterSequenceZ->getArray(); + for (std::size_t nPointIndex=0; nPointIndex ShapeFactory::getOrCreateChartRootShape( + const rtl::Reference& xDrawPage ) +{ + rtl::Reference xRet = ShapeFactory::getChartRootShape(xDrawPage); + if (xRet.is()) + return xRet; + + // Create a new root shape and set it to the bottom of the page. The root + // shape is identified by having the name com.sun.star.chart2.shapes. + rtl::Reference xShapeGroup = new SvxShapeGroup(nullptr, nullptr); + xShapeGroup->setShapeKind(SdrObjKind::Group); + // cast to resolve ambiguity in converting to XShape + xDrawPage->addBottom(static_cast(xShapeGroup.get())); + + setShapeName(xShapeGroup, "com.sun.star.chart2.shapes"); + xShapeGroup->setSize(awt::Size(0,0)); + + return xShapeGroup; +} + +void ShapeFactory::setPageSize(const rtl::Reference&, const awt::Size&) {} + +// diverse tools::PolyPolygon create methods + +static uno::Any createPolyPolygon_Cube( + const drawing::Direction3D& rSize, double fRoundedEdge, bool bRounded ) +{ + OSL_PRECOND(fRoundedEdge>=0, "fRoundedEdge needs to be >= 0"); + + // always use extra points, so set percent diagonal to 0.4 which is 0% in the UI (old Chart comment) + if( fRoundedEdge == 0.0 && bRounded) + fRoundedEdge = 0.4 / 200.0; + else if(!bRounded) + fRoundedEdge = 0.0; + + //fWidthH stands for Half Width + const double fWidthH = rSize.DirectionX >=0.0? rSize.DirectionX/2.0 : -rSize.DirectionX/2.0; + const double fHeight = rSize.DirectionY; + + const double fHeightSign = fHeight >= 0.0 ? 1.0 : -1.0; + + const double fOffset = (fWidthH * fRoundedEdge) * 1.05; // increase by 5% for safety + const bool bRoundEdges = fRoundedEdge && fOffset < fWidthH && 2.0 * fOffset < fHeightSign*fHeight; + const sal_Int32 nPointCount = bRoundEdges ? 13 : 5; + + drawing::PolyPolygonShape3D aPP; + + aPP.SequenceX.realloc(1); + aPP.SequenceY.realloc(1); + aPP.SequenceZ.realloc(1); + + drawing::DoubleSequence* pOuterSequenceX = aPP.SequenceX.getArray(); + drawing::DoubleSequence* pOuterSequenceY = aPP.SequenceY.getArray(); + drawing::DoubleSequence* pOuterSequenceZ = aPP.SequenceZ.getArray(); + + pOuterSequenceX->realloc(nPointCount); + pOuterSequenceY->realloc(nPointCount); + pOuterSequenceZ->realloc(nPointCount); + + double* pInnerSequenceX = pOuterSequenceX->getArray(); + double* pInnerSequenceY = pOuterSequenceY->getArray(); + double* pInnerSequenceZ = pOuterSequenceZ->getArray(); + + for(sal_Int32 nN = nPointCount; nN--;) + *pInnerSequenceZ++ = 0.0; + + if(nPointCount == 5) + { + *pInnerSequenceY++ = 0.0; + *pInnerSequenceY++ = 0.0; + *pInnerSequenceY++ = fHeight; + *pInnerSequenceY++ = fHeight; + *pInnerSequenceY++ = 0.0; + + *pInnerSequenceX++ = -fWidthH; + *pInnerSequenceX++ = fWidthH; + *pInnerSequenceX++ = fWidthH; + *pInnerSequenceX++ = -fWidthH; + *pInnerSequenceX++ = -fWidthH; + } + else + { + *pInnerSequenceY++ = 0.0; + *pInnerSequenceY++ = 0.0; + *pInnerSequenceY++ = 0.0; + *pInnerSequenceY++ = fHeightSign*fOffset; + *pInnerSequenceY++ = fHeight - fHeightSign*fOffset; + *pInnerSequenceY++ = fHeight; + *pInnerSequenceY++ = fHeight; + *pInnerSequenceY++ = fHeight; + *pInnerSequenceY++ = fHeight; + *pInnerSequenceY++ = fHeight - fHeightSign*fOffset; + *pInnerSequenceY++ = fHeightSign*fOffset; + *pInnerSequenceY++ = 0.0; + *pInnerSequenceY++ = 0.0; + + *pInnerSequenceX++ = -fWidthH + fOffset; + *pInnerSequenceX++ = fWidthH - fOffset; + *pInnerSequenceX++ = fWidthH; + *pInnerSequenceX++ = fWidthH; + *pInnerSequenceX++ = fWidthH; + *pInnerSequenceX++ = fWidthH; + *pInnerSequenceX++ = fWidthH - fOffset; + *pInnerSequenceX++ = -fWidthH + fOffset; + *pInnerSequenceX++ = -fWidthH; + *pInnerSequenceX++ = -fWidthH; + *pInnerSequenceX++ = -fWidthH; + *pInnerSequenceX++ = -fWidthH; + *pInnerSequenceX++ = -fWidthH + fOffset; + } + return uno::Any( &aPP, cppu::UnoType::get()); +} + +static uno::Any createPolyPolygon_Cylinder( + double fHeight + , double fRadius + , sal_Int32& nVerticalSegmentCount ) +{ + //fHeight may be negative + OSL_PRECOND(fRadius>0, "The radius of a cylinder needs to be > 0"); + + drawing::PolyPolygonShape3D aPP; + + nVerticalSegmentCount=1; + + aPP.SequenceX.realloc(3); + aPP.SequenceY.realloc(3); + aPP.SequenceZ.realloc(3); + + drawing::DoubleSequence* pOuterSequenceX = aPP.SequenceX.getArray(); + drawing::DoubleSequence* pOuterSequenceY = aPP.SequenceY.getArray(); + drawing::DoubleSequence* pOuterSequenceZ = aPP.SequenceZ.getArray(); + + pOuterSequenceX->realloc(2); + pOuterSequenceY->realloc(2); + pOuterSequenceZ->realloc(2); + + double* pInnerSequenceX = pOuterSequenceX->getArray(); + double* pInnerSequenceY = pOuterSequenceY->getArray(); + double* pInnerSequenceZ = pOuterSequenceZ->getArray(); + + double fY1 = 0.0; + double fY2 = fHeight; + + if( fHeight<0.0 ) + std::swap(fY1,fY2); + + for(sal_Int32 nN = 2; nN--;) + *pInnerSequenceZ++ = 0.0; + + *pInnerSequenceX++ = 0.0; + *pInnerSequenceY++ = fY1; + + *pInnerSequenceX++ = fRadius; + *pInnerSequenceY++ = fY1; + + pOuterSequenceX++;pOuterSequenceY++;pOuterSequenceZ++; + pOuterSequenceX->realloc(2); + pOuterSequenceY->realloc(2); + pOuterSequenceZ->realloc(2); + + pInnerSequenceX = pOuterSequenceX->getArray(); + pInnerSequenceY = pOuterSequenceY->getArray(); + pInnerSequenceZ = pOuterSequenceZ->getArray(); + + for(sal_Int32 nN = 2; nN--;) + *pInnerSequenceZ++ = 0.0; + + *pInnerSequenceX++ = fRadius; + *pInnerSequenceY++ = fY1; + + *pInnerSequenceX++ = fRadius; + *pInnerSequenceY++ = fY2; + + pOuterSequenceX++;pOuterSequenceY++;pOuterSequenceZ++; + pOuterSequenceX->realloc(2); + pOuterSequenceY->realloc(2); + pOuterSequenceZ->realloc(2); + + pInnerSequenceX = pOuterSequenceX->getArray(); + pInnerSequenceY = pOuterSequenceY->getArray(); + pInnerSequenceZ = pOuterSequenceZ->getArray(); + + for(sal_Int32 nN = 2; nN--;) + *pInnerSequenceZ++ = 0.0; + + *pInnerSequenceX++ = fRadius; + *pInnerSequenceY++ = fY2; + + *pInnerSequenceX++ = 0.0; + *pInnerSequenceY++ = fY2; + + return uno::Any( &aPP, cppu::UnoType::get()); +} + +static uno::Any createPolyPolygon_Cone( double fHeight, double fRadius, double fTopHeight + , sal_Int32& nVerticalSegmentCount ) +{ + OSL_PRECOND(fRadius>0, "The radius of a cone needs to be > 0"); + + //for stacked charts we need cones without top -> fTopHeight != 0 resp. bTopless == true + //fTopHeight indicates the high of the cutted top only (not the full height) + bool bTopless = !::rtl::math::approxEqual( fHeight, fHeight + fTopHeight ); + + double r1= 0.0, r2 = fRadius; + if(bTopless) + // #i63212# fHeight may be negative, fTopHeight is always positive -> use fabs(fHeight) + r1 = fRadius * fTopHeight/(fabs(fHeight)+fTopHeight); + + nVerticalSegmentCount=1; + drawing::PolyPolygonShape3D aPP; + + aPP.SequenceX.realloc(2); + aPP.SequenceY.realloc(2); + aPP.SequenceZ.realloc(2); + + drawing::DoubleSequence* pOuterSequenceX = aPP.SequenceX.getArray(); + drawing::DoubleSequence* pOuterSequenceY = aPP.SequenceY.getArray(); + drawing::DoubleSequence* pOuterSequenceZ = aPP.SequenceZ.getArray(); + + pOuterSequenceX->realloc(2); + pOuterSequenceY->realloc(2); + pOuterSequenceZ->realloc(2); + + double* pInnerSequenceX = pOuterSequenceX->getArray(); + double* pInnerSequenceY = pOuterSequenceY->getArray(); + double* pInnerSequenceZ = pOuterSequenceZ->getArray(); + + double fX1 = 0.0; + double fX2 = r2; + double fX3 = r1; + + double fY1 = 0.0; + double fY2 = 0.0; + double fY3 = fHeight; + + if( fHeight<0.0 ) + { + std::swap(fX1,fX3); + std::swap(fY1,fY3); + } + + for(sal_Int32 nN = 2; nN--;) + *pInnerSequenceZ++ = 0.0; + + *pInnerSequenceY++ = fY1; + *pInnerSequenceX++ = fX1; + + *pInnerSequenceY++ = fY2; + *pInnerSequenceX++ = fX2; + + pOuterSequenceX++;pOuterSequenceY++;pOuterSequenceZ++; + pOuterSequenceX->realloc(2); + pOuterSequenceY->realloc(2); + pOuterSequenceZ->realloc(2); + + pInnerSequenceX = pOuterSequenceX->getArray(); + pInnerSequenceY = pOuterSequenceY->getArray(); + pInnerSequenceZ = pOuterSequenceZ->getArray(); + + for(sal_Int32 nN = 2; nN--;) + *pInnerSequenceZ++ = 0.0; + + *pInnerSequenceY++ = fY2; + *pInnerSequenceX++ = fX2; + + *pInnerSequenceY++ = fY3; + *pInnerSequenceX++ = fX3; + + return uno::Any( &aPP, cppu::UnoType::get()); +} + +// methods for 3D shape creation + +rtl::Reference + ShapeFactory::createCube( + const rtl::Reference& xTarget + , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize + , sal_Int32 nRotateZAngleHundredthDegree + , const uno::Reference< beans::XPropertySet >& xSourceProp + , const tPropertyNameMap& rPropertyNameMap + , bool bRounded ) +{ + if( !xTarget.is() ) + return nullptr; + if( bRounded ) + { + try + { + if( xSourceProp.is() ) + { + drawing::LineStyle aLineStyle; + xSourceProp->getPropertyValue( "BorderStyle" ) >>= aLineStyle; + if( aLineStyle == drawing::LineStyle_SOLID ) + bRounded = false; + } + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + } + rtl::Reference xShape = impl_createCube( xTarget, rPosition, rSize, nRotateZAngleHundredthDegree, bRounded ); + if( xSourceProp.is()) + PropertyMapper::setMappedProperties( *xShape, xSourceProp, rPropertyNameMap ); + return xShape; +} + +rtl::Reference + ShapeFactory::impl_createCube( + const rtl::Reference& xTarget + , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize + , sal_Int32 nRotateZAngleHundredthDegree + , bool bRounded ) +{ + if( !xTarget.is() ) + return nullptr; + + //create shape + rtl::Reference xShape = new Svx3DExtrudeObject(nullptr); + xShape->setShapeKind(SdrObjKind::E3D_Extrusion); + xTarget->addShape(*xShape); + + //set properties + try + { + //depth + double fDepth = rSize.DirectionZ; + if (fDepth<0) + fDepth*=-1.0; + + //PercentDiagonal + sal_Int16 nPercentDiagonal = bRounded ? 3 : 0; + + //Matrix for position + basegfx::B3DHomMatrix aHomMatrix; + if (nRotateZAngleHundredthDegree != 0) + aHomMatrix.rotate(0.0, 0.0, -basegfx::deg2rad<100>(nRotateZAngleHundredthDegree)); + aHomMatrix.translate(rPosition.PositionX, rPosition.PositionY, + rPosition.PositionZ - (fDepth / 2.0)); + + uno::Sequence aPropertyNames { + UNO_NAME_3D_EXTRUDE_DEPTH, + UNO_NAME_3D_PERCENT_DIAGONAL, + UNO_NAME_3D_POLYPOLYGON3D, + UNO_NAME_3D_TRANSFORM_MATRIX, + }; + + uno::Sequence aPropertyValues { + uno::Any(sal_Int32(fDepth)), // Depth + uno::Any(nPercentDiagonal), // PercentDiagonal + createPolyPolygon_Cube(rSize, double(nPercentDiagonal) / 200.0, bRounded), + uno::Any(B3DHomMatrixToHomogenMatrix(aHomMatrix)) + }; + + xShape->setPropertyValues(aPropertyNames, aPropertyValues); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createCylinder( + const rtl::Reference& xTarget + , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize + , sal_Int32 nRotateZAngleHundredthDegree ) +{ + return impl_createConeOrCylinder( + xTarget, rPosition, rSize, 0.0, nRotateZAngleHundredthDegree, true ); +} + +rtl::Reference + ShapeFactory::createPyramid( + const rtl::Reference& xTarget + , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize + , double fTopHeight, bool bRotateZ + , const uno::Reference< beans::XPropertySet >& xSourceProp + , const tPropertyNameMap& rPropertyNameMap ) +{ + if( !xTarget.is() ) + return nullptr; + + rtl::Reference xGroup( ShapeFactory::createGroup3D( xTarget ) ); + + bool bDoubleSided = false; + short nRotatedTexture = 0; + + const double fWidth = rSize.DirectionX; + const double fDepth = rSize.DirectionZ; + const double fHeight = rSize.DirectionY; + + drawing::Position3D aBottomP1( rPosition.PositionX, rPosition.PositionY, rPosition.PositionZ - fDepth/2.0 ); + if(bRotateZ) + aBottomP1.PositionY -= fWidth/2.0; + else + aBottomP1.PositionX -= fWidth/2.0; + drawing::Position3D aBottomP2( aBottomP1 ); + if(bRotateZ) + aBottomP2.PositionY += fWidth; + else + aBottomP2.PositionX += fWidth; + drawing::Position3D aBottomP3( aBottomP2 ); + drawing::Position3D aBottomP4( aBottomP1 ); + aBottomP3.PositionZ += fDepth; + aBottomP4.PositionZ += fDepth; + + const double fTopFactor = fTopHeight/(fabs(fHeight)+fTopHeight); + drawing::Position3D aTopP1( rPosition.PositionX, rPosition.PositionY, rPosition.PositionZ - fDepth*fTopFactor/2.0 ); + if(bRotateZ) + { + aTopP1.PositionY -= fWidth*fTopFactor/2.0; + aTopP1.PositionX += fHeight; + } + else + { + aTopP1.PositionX -= fWidth*fTopFactor/2.0; + aTopP1.PositionY += fHeight; + } + drawing::Position3D aTopP2( aTopP1 ); + if(bRotateZ) + aTopP2.PositionY += fWidth*fTopFactor; + else + aTopP2.PositionX += fWidth*fTopFactor; + drawing::Position3D aTopP3( aTopP2 ); + drawing::Position3D aTopP4( aTopP1 ); + aTopP3.PositionZ += fDepth*fTopFactor; + aTopP4.PositionZ += fDepth*fTopFactor; + + Stripe aStripeBottom( aBottomP1, aBottomP4, aBottomP3, aBottomP2 ); + + drawing::Position3D aNormalsBottomP1( aBottomP1 ); + drawing::Position3D aNormalsBottomP2( aBottomP2 ); + drawing::Position3D aNormalsBottomP3( aBottomP3 ); + drawing::Position3D aNormalsBottomP4( aBottomP4 ); + drawing::Position3D aNormalsTopP1( aBottomP1 ); + drawing::Position3D aNormalsTopP2( aBottomP2 ); + drawing::Position3D aNormalsTopP3( aBottomP3 ); + drawing::Position3D aNormalsTopP4( aBottomP4 ); + if( bRotateZ ) + { + aNormalsTopP1.PositionX += fHeight; + aNormalsTopP2.PositionX += fHeight; + aNormalsTopP3.PositionX += fHeight; + aNormalsTopP4.PositionX += fHeight; + } + else + { + aNormalsTopP1.PositionY += fHeight; + aNormalsTopP2.PositionY += fHeight; + aNormalsTopP3.PositionY += fHeight; + aNormalsTopP4.PositionY += fHeight; + } + + bool bInvertPolygon = false; + bool bInvertNormals = false; + + if(bRotateZ) + { + //bars + if(fHeight>=0.0) + { + nRotatedTexture = 2; + bInvertNormals = true; + aStripeBottom = Stripe( aBottomP1, aBottomP4, aBottomP3, aBottomP2 ); + } + else + { + bInvertPolygon = true; + nRotatedTexture = 1; + aStripeBottom = Stripe( aBottomP2, aBottomP3, aBottomP4, aBottomP1 ); + } + } + else + { + //columns + if(fHeight>=0.0) + { + bInvertPolygon = true; + nRotatedTexture = 2; + aStripeBottom = Stripe( aBottomP2, aBottomP3, aBottomP4, aBottomP1 ); + } + else + { + nRotatedTexture = 3; + bInvertNormals = true; + aStripeBottom = Stripe( aBottomP4, aBottomP3, aBottomP2, aBottomP1 ); + } + } + aStripeBottom.InvertNormal(true); + + Stripe aStripe1( aTopP2, aTopP1, aBottomP1, aBottomP2 ); + Stripe aStripe2( aTopP3, aTopP2, aBottomP2, aBottomP3 ); + Stripe aStripe3( aTopP4, aTopP3, aBottomP3, aBottomP4 ); + Stripe aStripe4( aTopP1, aTopP4, aBottomP4, aBottomP1 ); + + if( bInvertPolygon ) + { + aStripe1 = Stripe( aBottomP1, aTopP1, aTopP2, aBottomP2 ); + aStripe2 = Stripe( aBottomP2, aTopP2, aTopP3, aBottomP3 ); + aStripe3 = Stripe( aBottomP3, aTopP3, aTopP4, aBottomP4 ); + aStripe4 = Stripe( aBottomP4, aTopP4, aTopP1, aBottomP1 ); + } + + Stripe aNormalsStripe1( aNormalsTopP1, aNormalsBottomP1, aNormalsBottomP2, aNormalsTopP2 ); + Stripe aNormalsStripe2( aNormalsTopP2, aNormalsBottomP2, aNormalsBottomP3, aNormalsTopP3 ); + Stripe aNormalsStripe3( aNormalsTopP3, aNormalsBottomP3, aNormalsBottomP4, aNormalsTopP4 ); + Stripe aNormalsStripe4( aNormalsTopP4, aNormalsBottomP4, aNormalsBottomP1, aNormalsTopP1 ); + + if( bInvertNormals ) + { + aNormalsStripe1 = Stripe( aNormalsTopP2, aNormalsBottomP2, aNormalsBottomP1, aNormalsTopP1 ); + aNormalsStripe2 = Stripe( aNormalsTopP3, aNormalsBottomP3, aNormalsBottomP2, aNormalsTopP2 ); + aNormalsStripe3 = Stripe( aNormalsTopP4, aNormalsBottomP4, aNormalsBottomP3, aNormalsTopP3 ); + aNormalsStripe4 = Stripe( aNormalsTopP1, aNormalsBottomP1, aNormalsBottomP4, aNormalsTopP4 ); + } + + aStripe1.SetManualNormal( aNormalsStripe1.getNormal() ); + aStripe2.SetManualNormal( aNormalsStripe2.getNormal() ); + aStripe3.SetManualNormal( aNormalsStripe3.getNormal() ); + aStripe4.SetManualNormal( aNormalsStripe4.getNormal() ); + + const bool bFlatNormals = false; + ShapeFactory::createStripe( xGroup, aStripe1, xSourceProp, rPropertyNameMap, bDoubleSided, nRotatedTexture, bFlatNormals ); + ShapeFactory::createStripe( xGroup, aStripe2, xSourceProp, rPropertyNameMap, bDoubleSided, nRotatedTexture, bFlatNormals ); + ShapeFactory::createStripe( xGroup, aStripe3, xSourceProp, rPropertyNameMap, bDoubleSided, nRotatedTexture, bFlatNormals ); + ShapeFactory::createStripe( xGroup, aStripe4, xSourceProp, rPropertyNameMap, bDoubleSided, nRotatedTexture, bFlatNormals ); + ShapeFactory::createStripe( xGroup, aStripeBottom, xSourceProp, rPropertyNameMap, bDoubleSided, nRotatedTexture, bFlatNormals ); + + return xGroup; +} + +rtl::Reference + ShapeFactory::createCone( + const rtl::Reference& xTarget + , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize + , double fTopHeight, sal_Int32 nRotateZAngleHundredthDegree ) +{ + return impl_createConeOrCylinder( xTarget, rPosition, rSize, fTopHeight, nRotateZAngleHundredthDegree, false ); +} + +rtl::Reference + ShapeFactory::impl_createConeOrCylinder( + const rtl::Reference& xTarget + , const drawing::Position3D& rPosition, const drawing::Direction3D& rSize + , double fTopHeight, sal_Int32 nRotateZAngleHundredthDegree + , bool bCylinder ) +{ + if( !xTarget.is() ) + return nullptr; + + //create shape + rtl::Reference xShape = new Svx3DLatheObject(nullptr); + xShape->setShapeKind(SdrObjKind::E3D_Lathe); + xTarget->addShape(*xShape); + + double fWidth = rSize.DirectionX/2.0; //The depth will be corrected within Matrix + double fRadius = fWidth; //!!!!!!!! problem in drawing layer: rotation object calculates wrong needed size -> wrong camera (it's a problem with bounding boxes) + double fHeight = rSize.DirectionY; + + //set properties + try + { + //Polygon + sal_Int32 nVerticalSegmentCount = 0; + uno::Any aPPolygon = bCylinder + ? createPolyPolygon_Cylinder(fHeight, fRadius, nVerticalSegmentCount) + : createPolyPolygon_Cone(fHeight, fRadius, fTopHeight, nVerticalSegmentCount); + + //Matrix for position + basegfx::B3DHomMatrix aHomMatrix; + if (nRotateZAngleHundredthDegree != 0) + aHomMatrix.rotate(0.0,0.0,-basegfx::deg2rad<100>(nRotateZAngleHundredthDegree)); + //stretch the symmetric objects to given depth + aHomMatrix.scale(1.0,1.0,rSize.DirectionZ/rSize.DirectionX); + aHomMatrix.translate(rPosition.PositionX, rPosition.PositionY, rPosition.PositionZ); + + uno::Sequence aPropertyNames{ + UNO_NAME_3D_PERCENT_DIAGONAL, + UNO_NAME_3D_POLYPOLYGON3D, + UNO_NAME_3D_TRANSFORM_MATRIX, + UNO_NAME_3D_HORZ_SEGS, + UNO_NAME_3D_VERT_SEGS, + UNO_NAME_3D_REDUCED_LINE_GEOMETRY + }; + + uno::Sequence aPropertyValues { + uno::Any(sal_Int16(5)), // PercentDiagonal + aPPolygon, // Polygon + uno::Any(B3DHomMatrixToHomogenMatrix(aHomMatrix)), // Matrix + uno::Any(CHART_3DOBJECT_SEGMENTCOUNT), // Horizontal Segments + uno::Any(nVerticalSegmentCount), // Vertical Segments + uno::Any(true) // Reduced lines + }; + + xShape->setPropertyValues(aPropertyNames, aPropertyValues); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +static void appendAndCloseBezierCoords( drawing::PolyPolygonBezierCoords& rReturn, const drawing::PolyPolygonBezierCoords& rAdd, bool bAppendInverse ) +{ + if(!rAdd.Coordinates.hasElements()) + return; + sal_Int32 nAddCount = rAdd.Coordinates[0].getLength(); + if(!nAddCount) + return; + + sal_Int32 nOldCount = rReturn.Coordinates[0].getLength(); + + auto pCoordinates = rReturn.Coordinates.getArray(); + pCoordinates[0].realloc(nOldCount + nAddCount + 1); + auto pCoordinates0 = pCoordinates[0].getArray(); + auto pFlags = rReturn.Flags.getArray(); + pFlags[0].realloc(nOldCount+nAddCount+1); + auto pFlags0 = pFlags[0].getArray(); + + for(sal_Int32 nN=0;nN( fWidthAngleRadian/fAngleSubdivisionRadian ); + if( fWidthAngleRadian > fAngleSubdivisionRadian*nSegmentCount ) + nSegmentCount++; + + double fFirstSegmentAngle = fAngleSubdivisionRadian; + double fLastSegmentAngle = fAngleSubdivisionRadian; + if(nSegmentCount==1) + { + fFirstSegmentAngle = fWidthAngleRadian; + fLastSegmentAngle = 0.0; + } + else + { + double fFirstAngleOnSubDivision = (static_cast(fStartAngleRadian/fAngleSubdivisionRadian)+1)*fAngleSubdivisionRadian; + if( !::rtl::math::approxEqual( fStartAngleRadian, fFirstAngleOnSubDivision ) ) + fFirstSegmentAngle = fFirstAngleOnSubDivision-fStartAngleRadian; + + if(nSegmentCount>1) + { + fLastSegmentAngle = fWidthAngleRadian-fFirstSegmentAngle-fAngleSubdivisionRadian*(nSegmentCount-2); + if( fLastSegmentAngle<0 ) + nSegmentCount--; + if( fLastSegmentAngle>fAngleSubdivisionRadian ) + { + fLastSegmentAngle-=fAngleSubdivisionRadian; + nSegmentCount++; + } + } + } + + sal_Int32 nPointCount = 1 + 3*nSegmentCount; //first point of next segment equals last point of former segment + + drawing::PointSequence aPoints(nPointCount); + auto pPoints = aPoints.getArray(); + drawing::FlagSequence aFlags(nPointCount); + auto pFlags = aFlags.getArray(); + + //!! applying matrix to vector does ignore translation, so it is important to use a B2DPoint here instead of B2DVector + ::basegfx::B2DPoint P0,P1,P2,P3; + + sal_Int32 nPoint=0; + double fCurrentRotateAngle = fStartAngleRadian; + for(sal_Int32 nSegment=0; nSegment( P0.getX()); + pPoints[nPoint].Y = static_cast< sal_Int32 >( P0.getY()); + pFlags [nPoint++] = drawing::PolygonFlags_NORMAL; + + pPoints[nPoint].X = static_cast< sal_Int32 >( P1.getX()); + pPoints[nPoint].Y = static_cast< sal_Int32 >( P1.getY()); + pFlags[nPoint++] = drawing::PolygonFlags_CONTROL; + + pPoints[nPoint].X = static_cast< sal_Int32 >( P2.getX()); + pPoints[nPoint].Y = static_cast< sal_Int32 >( P2.getY()); + pFlags [nPoint++] = drawing::PolygonFlags_CONTROL; + + if(nSegment==(nSegmentCount-1)) + { + pPoints[nPoint].X = static_cast< sal_Int32 >( P3.getX()); + pPoints[nPoint].Y = static_cast< sal_Int32 >( P3.getY()); + pFlags [nPoint++] = drawing::PolygonFlags_NORMAL; + } + } + + aReturn.Coordinates = { aPoints }; + aReturn.Flags = { aFlags }; + + return aReturn; +} + +static drawing::PolyPolygonBezierCoords getRingBezierCoords( + double fUnitCircleInnerRadius + , double fUnitCircleOuterRadius + , double fStartAngleRadian, double fWidthAngleRadian + , const ::basegfx::B2DHomMatrix& aTransformationFromUnitCircle + , const double fAngleSubdivisionRadian ) +{ + drawing::PolyPolygonBezierCoords aReturn; + + drawing::PolyPolygonBezierCoords aOuterArc = getCircularArcBezierCoords( + fStartAngleRadian, fWidthAngleRadian, fUnitCircleOuterRadius, aTransformationFromUnitCircle, fAngleSubdivisionRadian ); + aReturn.Coordinates = { aOuterArc.Coordinates[0] }; + aReturn.Flags = { aOuterArc.Flags[0] }; + + drawing::PolyPolygonBezierCoords aInnerArc = getCircularArcBezierCoords( + fStartAngleRadian, fWidthAngleRadian, fUnitCircleInnerRadius, aTransformationFromUnitCircle, fAngleSubdivisionRadian ); + appendAndCloseBezierCoords( aReturn, aInnerArc, true ); + + return aReturn; +} + +rtl::Reference + ShapeFactory::createPieSegment2D( + const rtl::Reference& xTarget + , double fUnitCircleStartAngleDegree, double fUnitCircleWidthAngleDegree + , double fUnitCircleInnerRadius, double fUnitCircleOuterRadius + , const drawing::Direction3D& rOffset + , const drawing::HomogenMatrix& rUnitCircleToScene ) +{ + if( !xTarget.is() ) + return nullptr; + + // tdf#123504: both 0 and 360 are valid and different values here! + while (fUnitCircleWidthAngleDegree > 360) + fUnitCircleWidthAngleDegree -= 360.0; + while (fUnitCircleWidthAngleDegree < 0) + fUnitCircleWidthAngleDegree += 360.0; + + //create shape + rtl::Reference xShape = new SvxShapePolyPolygon(nullptr); + xShape->setShapeKind(SdrObjKind::PathFill); // aka ClosedBezierShape + xTarget->addShape(*xShape); //need to add the shape before setting of properties + + //set properties + try + { + ::basegfx::B2DHomMatrix aTransformationFromUnitCircle( IgnoreZ( HomogenMatrixToB3DHomMatrix(rUnitCircleToScene) ) ); + aTransformationFromUnitCircle.translate(rOffset.DirectionX,rOffset.DirectionY); + + const double fAngleSubdivisionRadian = M_PI/10.0; + + drawing::PolyPolygonBezierCoords aCoords + = getRingBezierCoords(fUnitCircleInnerRadius, fUnitCircleOuterRadius, + basegfx::deg2rad(fUnitCircleStartAngleDegree), + basegfx::deg2rad(fUnitCircleWidthAngleDegree), + aTransformationFromUnitCircle, fAngleSubdivisionRadian); + + xShape->SvxShape::setPropertyValue( "PolyPolygonBezier", uno::Any( aCoords ) ); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + + return xShape; +} + +rtl::Reference + ShapeFactory::createPieSegment( + const rtl::Reference& xTarget + , double fUnitCircleStartAngleDegree, double fUnitCircleWidthAngleDegree + , double fUnitCircleInnerRadius, double fUnitCircleOuterRadius + , const drawing::Direction3D& rOffset + , const drawing::HomogenMatrix& rUnitCircleToScene + , double fDepth ) +{ + if( !xTarget.is() ) + return nullptr; + + // tdf#123504: both 0 and 360 are valid and different values here! + while (fUnitCircleWidthAngleDegree > 360) + fUnitCircleWidthAngleDegree -= 360.0; + while (fUnitCircleWidthAngleDegree < 0) + fUnitCircleWidthAngleDegree += 360.0; + + //create shape + rtl::Reference xShape = new Svx3DExtrudeObject(nullptr); + xShape->setShapeKind(SdrObjKind::E3D_Extrusion); + xTarget->addShape(*xShape); //need to add the shape before setting of properties + + //set properties + try + { + ::basegfx::B2DHomMatrix aTransformationFromUnitCircle( IgnoreZ( HomogenMatrixToB3DHomMatrix(rUnitCircleToScene) ) ); + aTransformationFromUnitCircle.translate(rOffset.DirectionX,rOffset.DirectionY); + + const double fAngleSubdivisionRadian = M_PI/32.0; + + drawing::PolyPolygonBezierCoords aCoords + = getRingBezierCoords(fUnitCircleInnerRadius, fUnitCircleOuterRadius, + basegfx::deg2rad(fUnitCircleStartAngleDegree), + basegfx::deg2rad(fUnitCircleWidthAngleDegree), + aTransformationFromUnitCircle, fAngleSubdivisionRadian); + + //depth + xShape->setPropertyValue( UNO_NAME_3D_EXTRUDE_DEPTH + , uno::Any(static_cast(fDepth)) ); + + //PercentDiagonal + xShape->setPropertyValue( UNO_NAME_3D_PERCENT_DIAGONAL + , uno::Any( sal_Int16(0) ) ); + + //Polygon + drawing::PolyPolygonShape3D aPoly( BezierToPoly(aCoords) ); + ShapeFactory::closePolygon( aPoly ); + xShape->setPropertyValue( UNO_NAME_3D_POLYPOLYGON3D + , uno::Any( aPoly ) ); + + //DoubleSided + xShape->setPropertyValue( UNO_NAME_3D_DOUBLE_SIDED + , uno::Any( true ) ); + + //Reduced lines + xShape->setPropertyValue( UNO_NAME_3D_REDUCED_LINE_GEOMETRY + , uno::Any( true ) ); + + //TextureProjectionMode + xShape->setPropertyValue( UNO_NAME_3D_TEXTURE_PROJ_Y + , uno::Any( drawing::TextureProjectionMode_OBJECTSPECIFIC ) ); + + //TextureProjectionMode + xShape->setPropertyValue( UNO_NAME_3D_TEXTURE_PROJ_X + , uno::Any( drawing::TextureProjectionMode_PARALLEL ) ); + xShape->setPropertyValue( UNO_NAME_3D_TEXTURE_PROJ_Y + , uno::Any( drawing::TextureProjectionMode_OBJECTSPECIFIC ) ); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createStripe( const rtl::Reference& xTarget + , const Stripe& rStripe + , const uno::Reference< beans::XPropertySet >& xSourceProp + , const tPropertyNameMap& rPropertyNameMap + , bool bDoubleSided + , short nRotatedTexture + , bool bFlatNormals ) +{ + if( !xTarget.is() ) + return nullptr; + + //create shape + rtl::Reference xShape = new Svx3DPolygonObject(nullptr); + xShape->setShapeKind(SdrObjKind::E3D_Polygon); + xTarget->addShape(*xShape); + + //set properties + try + { + uno::Sequence aPropertyNames{ + UNO_NAME_3D_POLYPOLYGON3D, + UNO_NAME_3D_TEXTUREPOLYGON3D, + UNO_NAME_3D_NORMALSPOLYGON3D, + UNO_NAME_3D_LINEONLY, + UNO_NAME_3D_DOUBLE_SIDED + }; + + uno::Sequence aPropertyValues { + rStripe.getPolyPolygonShape3D(), // Polygon + Stripe::getTexturePolygon(nRotatedTexture), // TexturePolygon + rStripe.getNormalsPolygon(), // Normals Polygon + uno::Any(false), // LineOnly + uno::Any(bDoubleSided) // DoubleSided + }; + + //NormalsKind + if (bFlatNormals) + lcl_addProperty(aPropertyNames, aPropertyValues, + UNO_NAME_3D_NORMALS_KIND, uno::Any(drawing::NormalsKind_FLAT)); + + xShape->setPropertyValues(aPropertyNames, aPropertyValues); + + if (xSourceProp) + { + PropertyMapper::setMappedProperties(*xShape, xSourceProp, rPropertyNameMap); + } + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createArea3D( const rtl::Reference& xTarget + , const std::vector>& rPolyPolygon + , double fDepth ) +{ + if( !xTarget.is() ) + return nullptr; + + if( rPolyPolygon.empty() ) + return nullptr; + + //create shape + rtl::Reference xShape = new Svx3DExtrudeObject(nullptr); + xShape->setShapeKind(SdrObjKind::E3D_Extrusion); + xTarget->addShape(*xShape); + + css::drawing::PolyPolygonShape3D aUnoPolyPolygon = toPolyPolygonShape3D(rPolyPolygon); + + //set properties + try + { + uno::Sequence aPropertyNames{ + UNO_NAME_3D_EXTRUDE_DEPTH, + UNO_NAME_3D_PERCENT_DIAGONAL, + UNO_NAME_3D_POLYPOLYGON3D, + UNO_NAME_3D_DOUBLE_SIDED, + }; + + uno::Sequence aPropertyValues { + uno::Any(sal_Int32(fDepth)), // depth + uno::Any(sal_Int16(0)), // PercentDiagonal + uno::Any(aUnoPolyPolygon), // Polygon + uno::Any(true) // DoubleSided + }; + + //the z component of the polygon is now ignored by the drawing layer, + //so we need to translate the object via transformation matrix + + //Matrix for position + if (!rPolyPolygon.empty() && !rPolyPolygon[0].empty()) + { + basegfx::B3DHomMatrix aM; + aM.translate(0, 0, rPolyPolygon[0][0].PositionZ); + drawing::HomogenMatrix aHM = B3DHomMatrixToHomogenMatrix(aM); + lcl_addProperty(aPropertyNames, aPropertyValues, UNO_NAME_3D_TRANSFORM_MATRIX, uno::Any(aHM)); + } + xShape->setPropertyValues(aPropertyNames, aPropertyValues); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createArea2D( const rtl::Reference& xTarget + , const std::vector>& rPolyPolygon ) +{ + if( !xTarget.is() ) + return nullptr; + + //create shape + SdrPathObj* pPath = new SdrPathObj(xTarget->GetSdrObject()->getSdrModelFromSdrObject(), SdrObjKind::Polygon); + xTarget->GetSdrObject()->GetSubList()->InsertObject(pPath); + + //set properties + try + { + // Polygon + basegfx::B2DPolyPolygon aNewPolyPolygon( PolyToB2DPolyPolygon(rPolyPolygon) ); + // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm + pPath->ForceMetricToItemPoolMetric(aNewPolyPolygon); + pPath->SetPathPoly(aNewPolyPolygon); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return static_cast(pPath->getUnoShape().get()); +} + +static drawing::PointSequenceSequence createPolyPolygon_Symbol( const drawing::Position3D& rPos + , const drawing::Direction3D& rSize + , sal_Int32 nStandardSymbol ) +{ + if(nStandardSymbol<0) + nStandardSymbol*=-1; + nStandardSymbol = nStandardSymbol%ShapeFactory::getSymbolCount(); + SymbolEnum eSymbolType=static_cast(nStandardSymbol); + + const double& fX = rPos.PositionX; + const double& fY = rPos.PositionY; + + const double fWidthH = rSize.DirectionX/2.0; //fWidthH stands for Half Width + const double fHeightH = rSize.DirectionY/2.0; //fHeightH stands for Half Height + + const sal_Int32 nQuarterCount = 35; // points inside a quadrant, used in case circle + + sal_Int32 nPointCount = 4; //all arrow symbols only need 4 points + switch( eSymbolType ) + { + case Symbol_Square: + case Symbol_Diamond: + case Symbol_Bowtie: + case Symbol_Sandglass: + case Symbol_HorizontalBar: + case Symbol_VerticalBar: + nPointCount = 5; + break; + case Symbol_X: + nPointCount = 13; + break; + case Symbol_Plus: + nPointCount = 13; + break; + case Symbol_Star: + nPointCount = 9; + break; + case Symbol_Asterisk: + nPointCount = 19; + break; + case Symbol_Circle: + nPointCount = 5 + 4 * nQuarterCount; + break; + default: + break; + } + + drawing::PointSequenceSequence aPP; + + aPP.realloc(1); + + uno::Sequence* pOuterSequence = aPP.getArray(); + + pOuterSequence->realloc(nPointCount); + + awt::Point* pInnerSequence = pOuterSequence->getArray(); + + auto toPoint = [](double x, double y) -> awt::Point + { + return { static_cast(x), static_cast(y) }; + }; + switch(eSymbolType) + { + case Symbol_Square: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + break; + } + case Symbol_UpArrow: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fHeightH ); + break; + } + case Symbol_DownArrow: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + break; + } + case Symbol_RightArrow: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + break; + } + case Symbol_LeftArrow: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY ); + break; + } + case Symbol_Bowtie: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + break; + } + case Symbol_Sandglass: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fHeightH ); + break; + } + case Symbol_Diamond: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY ); + + *pInnerSequence++ = toPoint( fX, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY ); + + *pInnerSequence++ = toPoint( fX, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY ); + break; + } + case Symbol_HorizontalBar: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY-0.2*fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY-0.2*fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY+0.2*fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY+0.2*fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY-0.2*fHeightH ); + break; + } + case Symbol_VerticalBar: + { + *pInnerSequence++ = toPoint( fX-0.2*fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX+0.2*fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX+0.2*fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX-0.2*fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX-0.2*fWidthH, fY-fHeightH ); + + break; + } + case Symbol_Circle: + { + double fOmega = 1.5707963267948966192 / (nQuarterCount + 1.0); + // one point in the middle of each edge to get full size bounding rectangle + *pInnerSequence++ = toPoint( fX + fWidthH, fY ); + // 0 to PI/2 + for (sal_Int32 i = 1; i <= nQuarterCount; ++i) + { + *pInnerSequence++ = toPoint( fX + fWidthH * cos( i * fOmega ), fY - fHeightH * sin( i * fOmega ) ); + } + // PI/2 to PI + *pInnerSequence++ = toPoint( fX, fY - fHeightH ); + for (sal_Int32 i = 1; i <= nQuarterCount; ++i) + { + *pInnerSequence++ = toPoint( fX - fWidthH * sin( i * fOmega), fY - fHeightH * cos( i * fOmega) ); + } + // PI to 3/2*PI + *pInnerSequence++ = toPoint( fX - fWidthH, fY ); + for (sal_Int32 i = 1; i <= nQuarterCount; ++i) + { + *pInnerSequence++ = toPoint( fX - fWidthH * cos( i * fOmega), fY + fHeightH * sin( i * fOmega) ); + } + // 3/2*PI to 2*PI + *pInnerSequence++ = toPoint( fX, fY + fHeightH ); + for (sal_Int32 i = 1; i <= nQuarterCount; ++i) + { + *pInnerSequence++ = toPoint( fX + fWidthH * sin(i * fOmega), fY + fHeightH * cos(i * fOmega) ); + } + // close polygon + *pInnerSequence++ = toPoint( fX + fWidthH, fY ); + break; + } + case Symbol_Star: + { + *pInnerSequence++ = toPoint( fX, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX+0.2*fWidthH, fY-0.2*fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY ); + + *pInnerSequence++ = toPoint( fX+0.2*fWidthH, fY+0.2*fHeightH ); + + *pInnerSequence++ = toPoint( fX, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX-0.2*fWidthH, fY+0.2*fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY ); + + *pInnerSequence++ = toPoint( fX-0.2*fWidthH, fY-0.2*fHeightH ); + + *pInnerSequence++ = toPoint( fX, fY-fHeightH ); + break; + } + case Symbol_X: + { + const double fScaleX = fWidthH / 128.0; + const double fScaleY = fHeightH / 128.0; + const double fSmall = sqrt(200.0); + const double fLarge = 128.0 - fSmall; + + *pInnerSequence++ = toPoint( fX, fY - fScaleY * fSmall ); + + *pInnerSequence++ = toPoint( fX - fScaleX * fLarge, fY - fHeightH ); + + *pInnerSequence++ = toPoint( fX - fWidthH, fY - fScaleY * fLarge ); + + *pInnerSequence++ = toPoint( fX - fScaleX * fSmall, fY ); + + *pInnerSequence++ = toPoint( fX - fWidthH, fY + fScaleY * fLarge ); + + *pInnerSequence++ = toPoint( fX - fScaleX * fLarge, fY + fHeightH ); + + *pInnerSequence++ = toPoint( fX, fY + fScaleY * fSmall ); + + *pInnerSequence++ = toPoint( fX + fScaleX * fLarge, fY + fHeightH ); + + *pInnerSequence++ = toPoint( fX + fWidthH, fY + fScaleY * fLarge ); + + *pInnerSequence++ = toPoint( fX + fScaleX * fSmall, fY ); + + *pInnerSequence++ = toPoint( fX + fWidthH, fY - fScaleY * fLarge ); + + *pInnerSequence++ = toPoint( fX + fScaleX * fLarge, fY - fHeightH ); + + *pInnerSequence++ = toPoint( fX, fY - fScaleY * fSmall ); + break; + + } + case Symbol_Plus: + { + const double fScaleX = fWidthH / 128.0; + const double fScaleY = fHeightH / 128.0; + const double fHalf = 10.0; //half line width on 256 size square + const double fdX = fScaleX * fHalf; + const double fdY = fScaleY * fHalf; + + *pInnerSequence++ = toPoint( fX-fdX, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fdX, fY-fdY ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fdY ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fdY ); + + *pInnerSequence++ = toPoint( fX-fdX, fY+fdY ); + + *pInnerSequence++ = toPoint( fX-fdX, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fdX, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fdX, fY+fdY ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY+fdY ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY-fdY ); + + *pInnerSequence++ = toPoint( fX+fdX, fY-fdY ); + + *pInnerSequence++ = toPoint( fX+fdY, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fdX, fY-fHeightH ); + break; + + } + case Symbol_Asterisk: + { + const double fHalf = 10.0; // half line width on 256 size square + const double fTwoY = fHalf * sqrt(3.0); + const double fFourY = (128.0 - 2.0 * fHalf ) / sqrt(3.0); + const double fThreeX = 128.0 - fHalf; + const double fThreeY = fHalf * sqrt(3.0) + fFourY; + const double fFiveX = 2.0 * fHalf; + + const double fScaleX = fWidthH / 128.0; + const double fScaleY = fHeightH / 128.0; + + //1 + *pInnerSequence++ = toPoint( fX-fScaleX * fHalf, fY-fHeightH ); + //2 + *pInnerSequence++ = toPoint( fX-fScaleX * fHalf, fY-fScaleY * fTwoY ); + //3 + *pInnerSequence++ = toPoint( fX-fScaleX * fThreeX, fY-fScaleY * fThreeY ); + //4 + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fScaleY * fFourY ); + //5 + *pInnerSequence++ = toPoint( fX-fScaleX * fFiveX, fY ); + //6 as 4 + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fScaleY * fFourY ); + //7 as 3 + *pInnerSequence++ = toPoint( fX-fScaleX * fThreeX, fY+fScaleY * fThreeY ); + //8 as 2 + *pInnerSequence++ = toPoint( fX-fScaleX * fHalf, fY+fScaleY * fTwoY ); + //9 as 1 + *pInnerSequence++ = toPoint( fX-fScaleX * fHalf, fY+fHeightH ); + //10 as 1 + *pInnerSequence++ = toPoint( fX+fScaleX * fHalf, fY+fHeightH ); + //11 as 2 + *pInnerSequence++ = toPoint( fX+fScaleX * fHalf, fY+fScaleY * fTwoY ); + //12 as 3 + *pInnerSequence++ = toPoint( fX+fScaleX * fThreeX, fY+fScaleY * fThreeY ); + //13 as 4 + *pInnerSequence++ = toPoint( fX+fWidthH, fY+fScaleY * fFourY ); + //14 as 5 + *pInnerSequence++ = toPoint( fX+fScaleX * fFiveX, fY ); + //15 as 4 + *pInnerSequence++ = toPoint( fX+fWidthH, fY-fScaleY * fFourY ); + //16 as 3 + *pInnerSequence++ = toPoint( fX+fScaleX * fThreeX, fY-fScaleY * fThreeY ); + //17 as 2 + *pInnerSequence++ = toPoint( fX+fScaleX * fHalf, fY-fScaleY * fTwoY ); + // 18 as 1 + *pInnerSequence++ = toPoint( fX+fScaleX * fHalf, fY-fHeightH ); + // 19 = 1, closing + *pInnerSequence++ = toPoint( fX-fScaleX * fHalf, fY-fHeightH ); + break; + } + default: //case Symbol_Square: + { + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY+fHeightH ); + + *pInnerSequence++ = toPoint( fX+fWidthH, fY-fHeightH ); + + *pInnerSequence++ = toPoint( fX-fWidthH, fY-fHeightH ); + break; + } + } + + return aPP; +} + +rtl::Reference + ShapeFactory::createSymbol2D( + const rtl::Reference& xTarget + , const drawing::Position3D& rPosition + , const drawing::Direction3D& rSize + , sal_Int32 nStandardSymbol + , sal_Int32 nBorderColor + , sal_Int32 nFillColor ) +{ + if( !xTarget.is() ) + return nullptr; + + //create shape + rtl::Reference xShape = new SvxShapePolyPolygon(nullptr); + xShape->setShapeKind(SdrObjKind::Polygon); + xTarget->addShape(*xShape); + + //set properties + try + { + drawing::PointSequenceSequence aPoints = + createPolyPolygon_Symbol( rPosition, rSize, nStandardSymbol ); + + //Polygon + xShape->SvxShape::setPropertyValue( UNO_NAME_POLYPOLYGON + , uno::Any( aPoints ) ); + + //LineColor + xShape->SvxShape::setPropertyValue( UNO_NAME_LINECOLOR + , uno::Any( nBorderColor ) ); + + //FillColor + xShape->SvxShape::setPropertyValue( UNO_NAME_FILLCOLOR + , uno::Any( nFillColor ) ); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createGraphic2D( + const rtl::Reference& xTarget + , const drawing::Position3D& rPosition + , const drawing::Direction3D& rSize + , const uno::Reference< graphic::XGraphic >& xGraphic ) +{ + if( !xTarget.is() || !xGraphic.is() ) + return nullptr; + + // @todo: change this to a rectangle shape with a fill bitmap for + // performance reasons (ask AW, said CL) + + //create shape + rtl::Reference xShape = new SvxGraphicObject(nullptr); + xShape->setShapeKind(SdrObjKind::Graphic); + xTarget->addShape(*xShape); + + try + { + // assume position is upper left corner. Transform to center. + drawing::Position3D aCenterPosition( + rPosition.PositionX - (rSize.DirectionX / 2.0), + rPosition.PositionY - (rSize.DirectionY / 2.0), + rPosition.PositionZ ); + xShape->setPosition( Position3DToAWTPoint( aCenterPosition )); + xShape->setSize( Direction3DToAWTSize( rSize )); + } + catch( const uno::Exception & ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + try + { + xShape->SvxShape::setPropertyValue( "Graphic", uno::Any( xGraphic )); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference< SvxShapeGroup > + ShapeFactory::createGroup2D( const rtl::Reference& xTarget + , const OUString& aName ) +{ + if( !xTarget.is() ) + return nullptr; + try + { + //create and add to target + rtl::Reference xShapeGroup = new SvxShapeGroup(nullptr, nullptr); + xShapeGroup->setShapeKind(SdrObjKind::Group); + // cast to resolve ambiguity in converting to XShape + xTarget->addShape(*xShapeGroup); + + //set name + if(!aName.isEmpty()) + setShapeName( xShapeGroup, aName ); + + {//workaround + //need this null size as otherwise empty group shapes where painted with a gray border + xShapeGroup->setSize(awt::Size(0,0)); + } + + return xShapeGroup; + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return nullptr; +} + +rtl::Reference< SvxShapeGroup > + ShapeFactory::createGroup2D( const rtl::Reference& xTarget + , const OUString& aName ) +{ + if( !xTarget.is() ) + return nullptr; + try + { + //create and add to target + rtl::Reference xShapeGroup = new SvxShapeGroup(nullptr, nullptr); + xShapeGroup->setShapeKind(SdrObjKind::Group); + // cast to resolve ambiguity in converting to XShape + xTarget->add(static_cast(xShapeGroup.get())); + + //set name + if(!aName.isEmpty()) + setShapeName( xShapeGroup, aName ); + + {//workaround + //need this null size as otherwise empty group shapes where painted with a gray border + xShapeGroup->setSize(awt::Size(0,0)); + } + + return xShapeGroup; + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return nullptr; +} + +rtl::Reference + ShapeFactory::createGroup3D( const rtl::Reference& xTarget + , const OUString& aName ) +{ + if( !xTarget.is() ) + return nullptr; + try + { + //create shape + rtl::Reference xShape = new Svx3DSceneObject(nullptr, nullptr); + xShape->setShapeKind(SdrObjKind::E3D_Scene); + xTarget->addShape(*xShape); + + //it is necessary to set the transform matrix to initialize the scene properly + //otherwise all objects which are placed into this Group will not be visible + //the following should be unnecessary after the bug is fixed + //set properties + try + { + ::basegfx::B3DHomMatrix aM; + xShape->SvxShape::setPropertyValue( UNO_NAME_3D_TRANSFORM_MATRIX + , uno::Any(B3DHomMatrixToHomogenMatrix(aM)) ); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + + //set name + if(!aName.isEmpty()) + setShapeName( xShape , aName ); + + //return + return xShape; + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return nullptr; +} + +rtl::Reference + ShapeFactory::createCircle2D( const rtl::Reference& xTarget + , const drawing::Position3D& rPosition + , const drawing::Direction3D& rSize ) +{ + if( !xTarget.is() ) + return nullptr; + + //create shape + rtl::Reference xShape = new SvxShapeCircle(nullptr); + xShape->setShapeKind(SdrObjKind::CircleOrEllipse); + xTarget->addShape(*xShape); + + try + { + drawing::Position3D aCenterPosition( + rPosition.PositionX - (rSize.DirectionX / 2.0), + rPosition.PositionY - (rSize.DirectionY / 2.0), + rPosition.PositionZ ); + xShape->setPosition( Position3DToAWTPoint( aCenterPosition )); + xShape->setSize( Direction3DToAWTSize( rSize )); + } + catch( const uno::Exception & ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + + //set properties + try + { + xShape->SvxShape::setPropertyValue( UNO_NAME_CIRCKIND, uno::Any( drawing::CircleKind_FULL ) ); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createCircle( const rtl::Reference& xTarget + , const awt::Size& rSize + , const awt::Point& rPosition ) +{ + rtl::Reference xShape = new SvxShapeCircle(nullptr); + xShape->setShapeKind(SdrObjKind::CircleOrEllipse); + xTarget->addShape(*xShape); + xShape->setSize( rSize ); + xShape->setPosition( rPosition ); + + return xShape; +} + +rtl::Reference + ShapeFactory::createLine3D( const rtl::Reference& xTarget + , const std::vector>& rPoints + , const VLineProperties& rLineProperties ) +{ + if( !xTarget.is() ) + return nullptr; + + if(rPoints.empty()) + return nullptr; + + //create shape + rtl::Reference xShape = new Svx3DPolygonObject(nullptr); + xShape->setShapeKind(SdrObjKind::E3D_Polygon); + xTarget->addShape(*xShape); + + css::drawing::PolyPolygonShape3D aUnoPoly = toPolyPolygonShape3D(rPoints); + + //set properties + try + { + uno::Sequence aPropertyNames { + UNO_NAME_3D_POLYPOLYGON3D, + UNO_NAME_3D_LINEONLY + }; + + uno::Sequence aPropertyValues { + uno::Any(aUnoPoly), // Polygon + uno::Any(true) // LineOnly + }; + + //Transparency + if(rLineProperties.Transparence.hasValue()) + { + lcl_addProperty(aPropertyNames, aPropertyValues, + UNO_NAME_LINETRANSPARENCE, + rLineProperties.Transparence); + } + + //LineStyle + if(rLineProperties.LineStyle.hasValue()) + { + lcl_addProperty(aPropertyNames, aPropertyValues, + UNO_NAME_LINESTYLE, + rLineProperties.LineStyle); + } + + //LineWidth + if(rLineProperties.Width.hasValue()) + { + lcl_addProperty(aPropertyNames, aPropertyValues, + UNO_NAME_LINEWIDTH, + rLineProperties.Width); + } + + //LineColor + if(rLineProperties.Color.hasValue()) + { + lcl_addProperty(aPropertyNames, aPropertyValues, + UNO_NAME_LINECOLOR, + rLineProperties.Color); + } + xShape->setPropertyValues(aPropertyNames, aPropertyValues); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createLine2D( const rtl::Reference& xTarget + , const drawing::PointSequenceSequence& rPoints + , const VLineProperties* pLineProperties ) +{ + if( !xTarget.is() ) + return nullptr; + + if(!rPoints.hasElements()) + return nullptr; + + //create shape + rtl::Reference xShape = new SvxShapePolyPolygon(nullptr); + xShape->setShapeKind(SdrObjKind::PolyLine); + xTarget->addShape(*xShape); + + //set properties + try + { + //Polygon + xShape->SvxShape::setPropertyValue( UNO_NAME_POLYPOLYGON + , uno::Any( rPoints ) ); + + if(pLineProperties) + { + //Transparency + if(pLineProperties->Transparence.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINETRANSPARENCE + , pLineProperties->Transparence ); + + //LineStyle + if(pLineProperties->LineStyle.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINESTYLE + , pLineProperties->LineStyle ); + + //LineWidth + if(pLineProperties->Width.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINEWIDTH + , pLineProperties->Width ); + + //LineColor + if(pLineProperties->Color.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINECOLOR + , pLineProperties->Color ); + + //LineDashName + if(pLineProperties->DashName.hasValue()) + xShape->SvxShape::setPropertyValue( "LineDashName" + , pLineProperties->DashName ); + + //LineCap + if(pLineProperties->LineCap.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINECAP + , pLineProperties->LineCap ); + } + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createLine2D( const rtl::Reference& xTarget + , const std::vector>& rPoints + , const VLineProperties* pLineProperties ) +{ + if( !xTarget.is() ) + return nullptr; + + if(rPoints.empty()) + return nullptr; + + //create shape + rtl::Reference xShape = new SvxShapePolyPolygon(nullptr); + xShape->setShapeKind(SdrObjKind::PolyLine); + xTarget->addShape(*xShape); + + drawing::PointSequenceSequence aAnyPoints = PolyToPointSequence(rPoints); + + //set properties + try + { + //Polygon + xShape->SvxShape::setPropertyValue( UNO_NAME_POLYPOLYGON + , uno::Any( aAnyPoints ) ); + + if(pLineProperties) + { + //Transparency + if(pLineProperties->Transparence.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINETRANSPARENCE + , pLineProperties->Transparence ); + + //LineStyle + if(pLineProperties->LineStyle.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINESTYLE + , pLineProperties->LineStyle ); + + //LineWidth + if(pLineProperties->Width.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINEWIDTH + , pLineProperties->Width ); + + //LineColor + if(pLineProperties->Color.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINECOLOR + , pLineProperties->Color ); + + //LineDashName + if(pLineProperties->DashName.hasValue()) + xShape->SvxShape::setPropertyValue( "LineDashName" + , pLineProperties->DashName ); + + //LineCap + if(pLineProperties->LineCap.hasValue()) + xShape->SvxShape::setPropertyValue( UNO_NAME_LINECAP + , pLineProperties->LineCap ); + } + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createLine ( const rtl::Reference& xTarget, + const awt::Size& rSize, const awt::Point& rPosition ) +{ + //create shape + rtl::Reference xShape = new SvxShapePolyPolygon(nullptr); + xShape->setShapeKind(SdrObjKind::Line); + xTarget->addShape(*xShape); + xShape->setSize( rSize ); + xShape->setPosition( rPosition ); + + return xShape; +} + +rtl::Reference ShapeFactory::createInvisibleRectangle( + const rtl::Reference& xTarget + , const awt::Size& rSize ) +{ + try + { + if(!xTarget.is()) + return nullptr; + + rtl::Reference xShape = new SvxShapeRect(nullptr); + xShape->setShapeKind(SdrObjKind::Rectangle); + xTarget->addShape( *xShape ); + ShapeFactory::makeShapeInvisible( xShape ); + xShape->setSize( rSize ); + return xShape; + } + catch( const uno::Exception & ) + { + DBG_UNHANDLED_EXCEPTION("chart2"); + } + return nullptr; +} + +rtl::Reference ShapeFactory::createRectangle( + const rtl::Reference& xTarget, + const awt::Size& rSize, + const awt::Point& rPosition, + const tNameSequence& rPropNames, + const tAnySequence& rPropValues, + StackPosition ePos ) +{ + rtl::Reference xShape = new SvxShapeRect(nullptr); + xShape->setShapeKind(SdrObjKind::Rectangle); + if (ePos == StackPosition::Bottom) + { + uno::Reference xTarget2(static_cast(xTarget.get()), uno::UNO_QUERY); + if (xTarget2.is()) + xTarget2->addBottom(xShape); + } + else + xTarget->addShape(*xShape); + + xShape->setPosition( rPosition ); + xShape->setSize( rSize ); + PropertyMapper::setMultiProperties( rPropNames, rPropValues, *xShape ); + + return xShape; +} + +rtl::Reference + ShapeFactory::createRectangle( + const rtl::Reference& xTarget ) +{ + rtl::Reference xShape = new SvxShapeRect(nullptr); + xShape->setShapeKind(SdrObjKind::Rectangle); + xTarget->addShape( *xShape ); + + return xShape; +} + +rtl::Reference + ShapeFactory::createText( const rtl::Reference& xTarget + , const OUString& rText + , const tNameSequence& rPropNames + , const tAnySequence& rPropValues + , const uno::Any& rATransformation ) +{ + if( !xTarget.is() ) + return nullptr; + + if(rText.isEmpty()) + return nullptr; + + //create shape and add to page + rtl::Reference xShape = new SvxShapeText(nullptr); + xShape->setShapeKind(SdrObjKind::Text); + xTarget->addShape(*xShape); + + //set text + xShape->setString( rText ); + + //set properties + PropertyMapper::setMultiProperties( rPropNames, rPropValues, *xShape ); + + //set position matrix + //the matrix needs to be set at the end behind autogrow and such position influencing properties + try + { + if (rATransformation.hasValue()) + xShape->SvxShape::setPropertyValue( "Transformation", rATransformation ); + else + SAL_INFO("chart2", "No rATransformation value is given to ShapeFactory::createText()"); + + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference + ShapeFactory::createText( const rtl::Reference& xTarget + , const uno::Sequence< uno::Reference< chart2::XFormattedString > >& xFormattedString + , const tNameSequence& rPropNames + , const tAnySequence& rPropValues + , const uno::Any& rATransformation ) +{ + if( !xTarget.is() ) + return nullptr; + + if( !xFormattedString.hasElements() ) + return nullptr; + + sal_Int32 nNumberOfParagraphs = xFormattedString.getLength(); + + bool bNotEmpty = false; + for( sal_Int32 nN = 0; nN < nNumberOfParagraphs; ++nN ) + { + if( !xFormattedString[nN]->getString().isEmpty() ) + { + bNotEmpty = true; + break; + } + } + if( !bNotEmpty ) + return nullptr; + + //create shape and add to page + rtl::Reference xShape = new SvxShapeText(nullptr); + xShape->setShapeKind(SdrObjKind::Text); + xTarget->addShape(*xShape); + + //set paragraph properties + bNotEmpty = false; + // the first cursor is used for appending the next paragraph, + // after a new string has been inserted the cursor is moved at the end + // of the inserted string + // the second cursor is used for selecting the paragraph and apply the + // passed text properties + Reference< text::XTextCursor > xInsertCursor = xShape->createTextCursor(); + Reference< text::XTextCursor > xSelectionCursor = xShape->createTextCursor(); + if( xInsertCursor.is() && xSelectionCursor.is() ) + { + uno::Reference< beans::XPropertySet > xSelectionProp( xSelectionCursor, uno::UNO_QUERY ); + if( xSelectionProp.is() ) + { + for( sal_Int32 nN = 0; nN < nNumberOfParagraphs; ++nN ) + { + if( !xFormattedString[nN]->getString().isEmpty() ) + { + xInsertCursor->gotoEnd( false ); + xSelectionCursor->gotoEnd( false ); + xShape->insertString( xInsertCursor, xFormattedString[nN]->getString(), false ); + bNotEmpty = true; + xSelectionCursor->gotoEnd( true ); // select current paragraph + uno::Reference< beans::XPropertySet > xStringProperties( xFormattedString[nN], uno::UNO_QUERY ); + PropertyMapper::setMappedProperties( xSelectionProp, xStringProperties, + PropertyMapper::getPropertyNameMapForTextShapeProperties() ); + } + } + } + } + + if( !bNotEmpty ) + return nullptr; + + //set whole text shape properties + PropertyMapper::setMultiProperties( rPropNames, rPropValues, *xShape ); + + if( rATransformation.hasValue() ) + { + //set position matrix + //the matrix needs to be set at the end behind autogrow and such position influencing properties + try + { + xShape->SvxShape::setPropertyValue( "Transformation", rATransformation ); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + } + return xShape; +} + +rtl::Reference + ShapeFactory::createText( const rtl::Reference& xTarget, + const awt::Size& rSize, + const awt::Point& rPos, + uno::Sequence< uno::Reference< chart2::XFormattedString > >& xFormattedString, + const uno::Reference< + beans::XPropertySet > & xTextProperties, + double nRotation, const OUString& aName, sal_Int32 nTextMaxWidth ) +{ + //create shape and add to page + rtl::Reference xShape = new SvxShapeText(nullptr); + xShape->setShapeKind(SdrObjKind::Text); + try + { + xTarget->addShape(*xShape); + + //set text and text properties + uno::Reference< text::XTextCursor > xTextCursor( xShape->createTextCursor() ); + if( !xTextCursor.is() ) + return xShape; + + tPropertyNameValueMap aValueMap; + //fill line-, fill- and paragraph-properties into the ValueMap + { + tPropertyNameMap aNameMap = PropertyMapper::getPropertyNameMapForParagraphProperties(); + auto const & add = PropertyMapper::getPropertyNameMapForFillAndLineProperties(); + aNameMap.insert(add.begin(), add.end()); + + PropertyMapper::getValueMap( aValueMap, aNameMap, xTextProperties ); + } + + //fill some more shape properties into the ValueMap + { + aValueMap.insert( { "TextHorizontalAdjust", uno::Any(drawing::TextHorizontalAdjust_CENTER) } ); // drawing::TextHorizontalAdjust + aValueMap.insert( { "TextVerticalAdjust", uno::Any(drawing::TextVerticalAdjust_CENTER) } ); //drawing::TextVerticalAdjust + aValueMap.insert( { "TextAutoGrowHeight", uno::Any(true) } ); // sal_Bool + aValueMap.insert( { "TextAutoGrowWidth", uno::Any(true) } ); // sal_Bool + aValueMap.insert( { "TextMaximumFrameWidth", uno::Any(nTextMaxWidth) } ); // sal_Int32 + + //set name/classified ObjectID (CID) + if( !aName.isEmpty() ) + aValueMap.emplace( "Name", uno::Any( aName ) ); //CID OUString + } + + //set global title properties + { + tNameSequence aPropNames; + tAnySequence aPropValues; + PropertyMapper::getMultiPropertyListsFromValueMap( aPropNames, aPropValues, aValueMap ); + PropertyMapper::setMultiProperties( aPropNames, aPropValues, *xShape ); + } + + bool bStackCharacters(false); + try + { + xTextProperties->getPropertyValue( "StackCharacters" ) >>= bStackCharacters; + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + + if(bStackCharacters) + { + //if the characters should be stacked we use only the first character properties for code simplicity + if( xFormattedString.hasElements() ) + { + OUString aLabel; + for( const auto & i : std::as_const(xFormattedString) ) + aLabel += i->getString(); + aLabel = ShapeFactory::getStackedString( aLabel, bStackCharacters ); + + xTextCursor->gotoEnd(false); + xShape->insertString( xTextCursor, aLabel, false ); + xTextCursor->gotoEnd(true); + uno::Reference< beans::XPropertySet > xSourceProps( xFormattedString[0], uno::UNO_QUERY ); + + PropertyMapper::setMappedProperties( *xShape, xSourceProps + , PropertyMapper::getPropertyNameMapForCharacterProperties() ); + + // adapt font size according to page size + awt::Size aOldRefSize; + if( xTextProperties->getPropertyValue( "ReferencePageSize") >>= aOldRefSize ) + { + RelativeSizeHelper::adaptFontSizes( *xShape, aOldRefSize, rSize ); + } + } + } + else + { + for( const uno::Reference< chart2::XFormattedString >& rxFS : std::as_const(xFormattedString) ) + { + xTextCursor->gotoEnd(false); + xShape->insertString( xTextCursor, rxFS->getString(), false ); + xTextCursor->gotoEnd(true); + } + awt::Size aOldRefSize; + bool bHasRefPageSize = + ( xTextProperties->getPropertyValue( "ReferencePageSize") >>= aOldRefSize ); + + if( xFormattedString.hasElements() ) + { + uno::Reference< beans::XPropertySet > xSourceProps( xFormattedString[0], uno::UNO_QUERY ); + PropertyMapper::setMappedProperties( *xShape, xSourceProps, PropertyMapper::getPropertyNameMapForCharacterProperties() ); + + // adapt font size according to page size + if( bHasRefPageSize ) + { + RelativeSizeHelper::adaptFontSizes( *xShape, aOldRefSize, rSize ); + } + } + } + + // #i109336# Improve auto positioning in chart + float fFontHeight = 0.0; + if ( xShape->SvxShape::getPropertyValue( "CharHeight" ) >>= fFontHeight ) + { + fFontHeight = convertPointToMm100(fFontHeight); + sal_Int32 nXDistance = static_cast< sal_Int32 >( ::rtl::math::round( fFontHeight * 0.18f ) ); + sal_Int32 nYDistance = static_cast< sal_Int32 >( ::rtl::math::round( fFontHeight * 0.30f ) ); + xShape->SvxShape::setPropertyValue( "TextLeftDistance", uno::Any( nXDistance ) ); + xShape->SvxShape::setPropertyValue( "TextRightDistance", uno::Any( nXDistance ) ); + xShape->SvxShape::setPropertyValue( "TextUpperDistance", uno::Any( nYDistance ) ); + xShape->SvxShape::setPropertyValue( "TextLowerDistance", uno::Any( nYDistance ) ); + } + sal_Int32 nXPos = rPos.X; + sal_Int32 nYPos = rPos.Y; + + //set position matrix + //the matrix needs to be set at the end behind autogrow and such position influencing properties + ::basegfx::B2DHomMatrix aM; + aM.rotate( -basegfx::deg2rad(nRotation) );//#i78696#->#i80521# + aM.translate( nXPos, nYPos ); + xShape->SvxShape::setPropertyValue( "Transformation", uno::Any( B2DHomMatrixToHomogenMatrix3(aM) ) ); + + xShape->SvxShape::setPropertyValue( "ParaAdjust", uno::Any( style::ParagraphAdjust_CENTER ) ); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + return xShape; +} + +rtl::Reference ShapeFactory::getChartRootShape( + const rtl::Reference& xDrawPage ) +{ + rtl::Reference xRet; + const uno::Reference< drawing::XShapes > xShapes = xDrawPage; + if( xShapes.is() ) + { + sal_Int32 nCount = xShapes->getCount(); + uno::Reference< drawing::XShape > xShape; + for( sal_Int32 nN = nCount; nN--; ) + { + if( xShapes->getByIndex( nN ) >>= xShape ) + { + if( ShapeFactory::getShapeName( xShape ) == "com.sun.star.chart2.shapes" ) + { + xRet = dynamic_cast(xShape.get()); + assert(xRet); + break; + } + } + } + } + return xRet; +} + +void ShapeFactory::makeShapeInvisible( const rtl::Reference< SvxShape >& xShape ) +{ + try + { + xShape->setPropertyValue( "LineStyle", uno::Any( drawing::LineStyle_NONE )); + xShape->setPropertyValue( "FillStyle", uno::Any( drawing::FillStyle_NONE )); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } +} + +// set a name/CID at a shape (is used for selection handling) + +void ShapeFactory::setShapeName( const rtl::Reference< SvxShape >& xShape + , const OUString& rName ) +{ + if(!xShape.is()) + return; + try + { + xShape->setPropertyValue( UNO_NAME_MISC_OBJ_NAME + , uno::Any( rName ) ); + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } +} + +OUString ShapeFactory::getShapeName( const uno::Reference< drawing::XShape >& xShape ) +{ + OUString aRet; + + uno::Reference< beans::XPropertySet > xProp( xShape, uno::UNO_QUERY ); + OSL_ENSURE(xProp.is(), "shape offers no XPropertySet"); + if( xProp.is()) + { + try + { + xProp->getPropertyValue( UNO_NAME_MISC_OBJ_NAME ) >>= aRet; + } + catch( const uno::Exception& ) + { + TOOLS_WARN_EXCEPTION("chart2", "" ); + } + } + + return aRet; +} + +uno::Any ShapeFactory::makeTransformation( const awt::Point& rScreenPosition2D, double fRotationAnglePi ) +{ + ::basegfx::B2DHomMatrix aM; + //As autogrow is active the rectangle is automatically expanded to that side + //to which the text is not adjusted. + // aM.scale( 1, 1 ); Oops? A scale with this parameters is neutral, line commented out + aM.rotate( fRotationAnglePi ); + aM.translate( rScreenPosition2D.X, rScreenPosition2D.Y ); + uno::Any aATransformation( B2DHomMatrixToHomogenMatrix3(aM) ); + return aATransformation; +} + +OUString ShapeFactory::getStackedString( const OUString& rString, bool bStacked ) +{ + sal_Int32 nLen = rString.getLength(); + if(!bStacked || !nLen) + return rString; + + OUStringBuffer aStackStr; + + //add a newline after each letter + //as we do not no letters here add a newline after each char + for( sal_Int32 nPosSrc=0; nPosSrc < nLen; nPosSrc++ ) + { + if( nPosSrc ) + aStackStr.append( '\r' ); + aStackStr.append(rString[nPosSrc]); + } + return aStackStr.makeStringAndClear(); +} + +bool ShapeFactory::hasPolygonAnyLines( const std::vector>& rPoly) +{ + // #i67757# check all contained polygons, if at least one polygon contains 2 or more points, return true + for( auto const & i : rPoly ) + if( i.size() > 1 ) + return true; + return false; +} + +bool ShapeFactory::isPolygonEmptyOrSinglePoint( const drawing::PolyPolygonShape3D& rPoly) +{ + // true, if empty polypolygon or one polygon with one point + return !rPoly.SequenceX.hasElements() || + ((rPoly.SequenceX.getLength() == 1) && (rPoly.SequenceX[0].getLength() <= 1)); +} + +bool ShapeFactory::isPolygonEmptyOrSinglePoint( const std::vector>& rPoly) +{ + // true, if empty polypolygon or one polygon with one point + return rPoly.empty() || ((rPoly.size() == 1) && (rPoly[0].size() <= 1)); +} + +void ShapeFactory::closePolygon( drawing::PolyPolygonShape3D& rPoly) +{ + OSL_ENSURE( rPoly.SequenceX.getLength() <= 1, "ShapeFactory::closePolygon - single polygon expected" ); + //add a last point == first point + if(isPolygonEmptyOrSinglePoint(rPoly)) + return; + drawing::Position3D aFirst(rPoly.SequenceX[0][0],rPoly.SequenceY[0][0],rPoly.SequenceZ[0][0]); + AddPointToPoly( rPoly, aFirst ); +} + +void ShapeFactory::closePolygon( std::vector>& rPoly) +{ + OSL_ENSURE( rPoly.size() <= 1, "ShapeFactory::closePolygon - single polygon expected" ); + //add a last point == first point + if(isPolygonEmptyOrSinglePoint(rPoly)) + return; + drawing::Position3D aFirst(rPoly[0][0]); + AddPointToPoly( rPoly, aFirst ); +} + +awt::Size ShapeFactory::calculateNewSizeRespectingAspectRatio( + const awt::Size& rTargetSize + , const awt::Size& rSourceSizeWithCorrectAspectRatio ) +{ + awt::Size aNewSize; + + double fFactorWidth = double(rTargetSize.Width)/double(rSourceSizeWithCorrectAspectRatio.Width); + double fFactorHeight = double(rTargetSize.Height)/double(rSourceSizeWithCorrectAspectRatio.Height); + double fFactor = std::min(fFactorWidth,fFactorHeight); + aNewSize.Width=static_cast(fFactor*rSourceSizeWithCorrectAspectRatio.Width); + aNewSize.Height=static_cast(fFactor*rSourceSizeWithCorrectAspectRatio.Height); + + return aNewSize; +} + +awt::Point ShapeFactory::calculateTopLeftPositionToCenterObject( + const awt::Point& rTargetAreaPosition + , const awt::Size& rTargetAreaSize + , const awt::Size& rObjectSize ) +{ + awt::Point aNewPosition(rTargetAreaPosition); + aNewPosition.X += static_cast(double(rTargetAreaSize.Width-rObjectSize.Width)/2.0); + aNewPosition.Y += static_cast(double(rTargetAreaSize.Height-rObjectSize.Height)/2.0); + return aNewPosition; +} + +::basegfx::B2IRectangle ShapeFactory::getRectangleOfShape( SvxShape& rShape ) +{ + ::basegfx::B2IRectangle aRet; + + awt::Point aPos = rShape.getPosition(); + awt::Size aSize = rShape.getSize(); + aRet = BaseGFXHelper::makeRectangle(aPos,aSize); + + return aRet; +} + +awt::Size ShapeFactory::getSizeAfterRotation( + SvxShape& rShape, double fRotationAngleDegree ) +{ + awt::Size aRet(0,0); + const awt::Size aSize( rShape.getSize() ); + + if( fRotationAngleDegree == 0.0 ) + aRet = aSize; + else + { + fRotationAngleDegree = NormAngle360(fRotationAngleDegree); + if(fRotationAngleDegree>270.0) + fRotationAngleDegree=360.0-fRotationAngleDegree; + else if(fRotationAngleDegree>180.0) + fRotationAngleDegree=fRotationAngleDegree-180.0; + else if(fRotationAngleDegree>90.0) + fRotationAngleDegree=180.0-fRotationAngleDegree; + + const double fAnglePi = basegfx::deg2rad(fRotationAngleDegree); + + aRet.Height = static_cast( + aSize.Width*std::sin( fAnglePi ) + + aSize.Height*std::cos( fAnglePi )); + aRet.Width = static_cast( + aSize.Width*std::cos( fAnglePi ) + + aSize.Height*std::sin( fAnglePi )); + } + return aRet; +} + +void ShapeFactory::removeSubShapes( const rtl::Reference& xShapes ) +{ + if( xShapes.is() ) + { + sal_Int32 nSubCount = xShapes->getCount(); + uno::Reference< drawing::XShape > xShape; + for( sal_Int32 nS = nSubCount; nS--; ) + { + if( xShapes->getByIndex( nS ) >>= xShape ) + xShapes->remove( xShape ); + } + } +} + +rtl::Reference +ShapeFactory::createTable(rtl::Reference const& xTarget) +{ + if( !xTarget.is() ) + return nullptr; + + //create table shape + rtl::Reference xShape = new SvxTableShape(nullptr); + xShape->setShapeKind(SdrObjKind::Table); + xTarget->addShape(*xShape); + + return xShape; +} + +} //namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ -- cgit v1.2.3