From ed5640d8b587fbcfed7dd7967f3de04b37a76f26 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 11:06:44 +0200 Subject: Adding upstream version 4:7.4.7. Signed-off-by: Daniel Baumann --- helpcontent2/source/text/simpress/02/04010000.xhp | 55 +++ helpcontent2/source/text/simpress/02/04020000.xhp | 39 ++ helpcontent2/source/text/simpress/02/04030000.xhp | 37 ++ helpcontent2/source/text/simpress/02/04060000.xhp | 37 ++ helpcontent2/source/text/simpress/02/04070000.xhp | 58 +++ helpcontent2/source/text/simpress/02/08020000.xhp | 37 ++ helpcontent2/source/text/simpress/02/08060000.xhp | 42 ++ helpcontent2/source/text/simpress/02/10020000.xhp | 239 ++++++++++ helpcontent2/source/text/simpress/02/10030000.xhp | 200 +++++++++ helpcontent2/source/text/simpress/02/10030200.xhp | 232 ++++++++++ helpcontent2/source/text/simpress/02/10050000.xhp | 107 +++++ helpcontent2/source/text/simpress/02/10060000.xhp | 170 +++++++ helpcontent2/source/text/simpress/02/10070000.xhp | 249 +++++++++++ helpcontent2/source/text/simpress/02/10080000.xhp | 174 ++++++++ helpcontent2/source/text/simpress/02/10090000.xhp | 195 ++++++++ helpcontent2/source/text/simpress/02/10100000.xhp | 518 ++++++++++++++++++++++ helpcontent2/source/text/simpress/02/10110000.xhp | 73 +++ helpcontent2/source/text/simpress/02/10120000.xhp | 196 ++++++++ helpcontent2/source/text/simpress/02/11060000.xhp | 49 ++ helpcontent2/source/text/simpress/02/11070000.xhp | 49 ++ helpcontent2/source/text/simpress/02/11080000.xhp | 56 +++ helpcontent2/source/text/simpress/02/11090000.xhp | 56 +++ helpcontent2/source/text/simpress/02/11100000.xhp | 54 +++ helpcontent2/source/text/simpress/02/11110000.xhp | 54 +++ helpcontent2/source/text/simpress/02/13010000.xhp | 51 +++ helpcontent2/source/text/simpress/02/13020000.xhp | 56 +++ helpcontent2/source/text/simpress/02/13030000.xhp | 56 +++ helpcontent2/source/text/simpress/02/13040000.xhp | 53 +++ helpcontent2/source/text/simpress/02/13050000.xhp | 57 +++ helpcontent2/source/text/simpress/02/13060000.xhp | 53 +++ helpcontent2/source/text/simpress/02/13090000.xhp | 54 +++ helpcontent2/source/text/simpress/02/13100000.xhp | 55 +++ helpcontent2/source/text/simpress/02/13140000.xhp | 44 ++ helpcontent2/source/text/simpress/02/13150000.xhp | 53 +++ helpcontent2/source/text/simpress/02/13160000.xhp | 43 ++ helpcontent2/source/text/simpress/02/13170000.xhp | 53 +++ helpcontent2/source/text/simpress/02/13180000.xhp | 42 ++ helpcontent2/source/text/simpress/02/13190000.xhp | 53 +++ 38 files changed, 3699 insertions(+) create mode 100644 helpcontent2/source/text/simpress/02/04010000.xhp create mode 100644 helpcontent2/source/text/simpress/02/04020000.xhp create mode 100644 helpcontent2/source/text/simpress/02/04030000.xhp create mode 100644 helpcontent2/source/text/simpress/02/04060000.xhp create mode 100644 helpcontent2/source/text/simpress/02/04070000.xhp create mode 100644 helpcontent2/source/text/simpress/02/08020000.xhp create mode 100644 helpcontent2/source/text/simpress/02/08060000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10020000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10030000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10030200.xhp create mode 100644 helpcontent2/source/text/simpress/02/10050000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10060000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10070000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10080000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10090000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10100000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10110000.xhp create mode 100644 helpcontent2/source/text/simpress/02/10120000.xhp create mode 100644 helpcontent2/source/text/simpress/02/11060000.xhp create mode 100644 helpcontent2/source/text/simpress/02/11070000.xhp create mode 100644 helpcontent2/source/text/simpress/02/11080000.xhp create mode 100644 helpcontent2/source/text/simpress/02/11090000.xhp create mode 100644 helpcontent2/source/text/simpress/02/11100000.xhp create mode 100644 helpcontent2/source/text/simpress/02/11110000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13010000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13020000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13030000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13040000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13050000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13060000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13090000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13100000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13140000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13150000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13160000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13170000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13180000.xhp create mode 100644 helpcontent2/source/text/simpress/02/13190000.xhp (limited to 'helpcontent2/source/text/simpress/02') diff --git a/helpcontent2/source/text/simpress/02/04010000.xhp b/helpcontent2/source/text/simpress/02/04010000.xhp new file mode 100644 index 000000000..74ada0301 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/04010000.xhp @@ -0,0 +1,55 @@ + + + + + + + + +Show/Hide Slide +/text/simpress/02/04010000.xhp + + +Sun Microsystems, Inc. + + + +
+ +Show/Hide SlideUFI: menu and icon +Hides the selected slide so that it is not displayed during a slide show. +
+The number of a hidden slide is crossed out. To show a hidden slide, choose Slide Show - Show/Hide Slide again. +
+ + + + +Icon + + + +Show/Hide Slide + + +
+ +
+ + diff --git a/helpcontent2/source/text/simpress/02/04020000.xhp b/helpcontent2/source/text/simpress/02/04020000.xhp new file mode 100644 index 000000000..09bfaedde --- /dev/null +++ b/helpcontent2/source/text/simpress/02/04020000.xhp @@ -0,0 +1,39 @@ + + + + + + + + +Slides Per Row +/text/simpress/02/04020000.xhp + + +Sun Microsystems, Inc. + + + +
+ +Slides Per Row +Enter the number of slides to display on each row in the Slide Sorter. +
+ + diff --git a/helpcontent2/source/text/simpress/02/04030000.xhp b/helpcontent2/source/text/simpress/02/04030000.xhp new file mode 100644 index 000000000..45a626e1e --- /dev/null +++ b/helpcontent2/source/text/simpress/02/04030000.xhp @@ -0,0 +1,37 @@ + + + + + + + + +Slide Effects +/text/simpress/02/04030000.xhp + + +Sun Microsystems, Inc. + + + + +Slide Effects +Select the transition effect that appears before the current slide is shown. + + diff --git a/helpcontent2/source/text/simpress/02/04060000.xhp b/helpcontent2/source/text/simpress/02/04060000.xhp new file mode 100644 index 000000000..ebeddc7aa --- /dev/null +++ b/helpcontent2/source/text/simpress/02/04060000.xhp @@ -0,0 +1,37 @@ + + + + + + + + +Time +/text/simpress/02/04060000.xhp + + +Sun Microsystems, Inc. + + + + +Time +Enter the amount of time before the slide show automatically advances to the next slide. This option is only available for automatic transition. + + diff --git a/helpcontent2/source/text/simpress/02/04070000.xhp b/helpcontent2/source/text/simpress/02/04070000.xhp new file mode 100644 index 000000000..8e5312f90 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/04070000.xhp @@ -0,0 +1,58 @@ + + + + + + + + + +Rehearse Timings +/text/simpress/02/04070000.xhp + + +Sun Microsystems, Inc. + + + +
+ +Rehearse Timings +Starts a slide show with a timer in the lower left corner. +
+
+ + + + +Icon + + + +Rehearse Timings + + +
+ +
+ + +Slide Show Settings + + diff --git a/helpcontent2/source/text/simpress/02/08020000.xhp b/helpcontent2/source/text/simpress/02/08020000.xhp new file mode 100644 index 000000000..1c5566dd0 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/08020000.xhp @@ -0,0 +1,37 @@ + + + + + + + + +Current Size +/text/simpress/02/08020000.xhp + + + +
+ +Current Size +Displays the X and Y position of the cursor and the size of the selected object. +
+This Status bar field uses the same measurement units as the rulers. You can define the units by choosing %PRODUCTNAME - PreferencesTools - Options - %PRODUCTNAME Impress - General. + + diff --git a/helpcontent2/source/text/simpress/02/08060000.xhp b/helpcontent2/source/text/simpress/02/08060000.xhp new file mode 100644 index 000000000..8b0d1e4a2 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/08060000.xhp @@ -0,0 +1,42 @@ + + + + + + + +Current Slide/Level +/text/simpress/02/08060000.xhp + + +Sun Microsystems, Inc. + + + + + +
+ +Current Slide/Level + Displays the current slide number followed by the total number of slides. +
+ In Layer Mode, the name of the layer containing the selected object is displayed. + + + diff --git a/helpcontent2/source/text/simpress/02/10020000.xhp b/helpcontent2/source/text/simpress/02/10020000.xhp new file mode 100644 index 000000000..53d5955d8 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10020000.xhp @@ -0,0 +1,239 @@ + + + + + + + + +Zoom +/text/simpress/02/10020000.xhp + + +Sun Microsystems, Inc. + + + +
+increasing sizes of views +views; display sizes +decreasing sizes of views +zooming; in presentations +views; shift function +hand icon for moving slides + + +Zoom +Reduces or enlarges the screen display of the current document. Click the arrow next to the icon to open the Zoom toolbar. +
+
+ + + + +Icon + + + +Zoom + + +
+ +
+
+ + + + +Icon + + + +Zoom ($[officename] Impress in Outline and Slide View) + + +
+ +
+ +Zoom In +Displays the slide at two times its current size. +You can also select the Zoom In tool and drag a rectangular frame around the area you want to enlarge. + + + + +Icon + + + +Zoom In + + +
+ + +Zoom Out +Displays the slide at half its current size. + + + + +Icon + + + +Zoom Out + + +
+ + +Zoom 100% +Displays the slide at its actual size. + + + + +Icon + + + +Zoom 100% + + +
+ + +Previous Zoom +Returns the display of the slide to the previous zoom factor you applied. You can also press Command +Ctrl+Comma(,). + + + + +Icon + + + +Previous Zoom + + +
+ + +Next Zoom +Undoes the action of the Previous Zoom command. You can also press Command +Ctrl+Period(.). + + + + +Icon + + + +Next Zoom + + +
+ + +Entire Page +Displays the entire slide on your screen. + + + + +Icon + + + +Entire Page + + +
+ + +Page Width +Displays the complete width of the slide. The top and bottom edges of the slide may not be visible. + + + + +Icon + + + +Page Width + + +
+ + +Optimal View +Resizes the display to include all of the objects on the slide. + + + + +Icon + + + +Optimal View + + +
+ + +Object Zoom +Resizes the display to fit the object(s) you selected. + + + + +Icon + + + +Object Zoom + + +
+ + +Shift +Moves the slide within the $[officename] window. Place the pointer on the slide, and drag to move the slide. When you release the mouse, the last tool you used is selected. + + + + +Icon + + + +Shift + + +
+ + + diff --git a/helpcontent2/source/text/simpress/02/10030000.xhp b/helpcontent2/source/text/simpress/02/10030000.xhp new file mode 100644 index 000000000..ad9ff692d --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10030000.xhp @@ -0,0 +1,200 @@ + + + + + +Transformations +/text/simpress/02/10030000.xhp + + +Sun Microsystems, Inc. + + + + + +flipping around a flip line +mirroring objects +3D rotation objects; converting to +slanting objects +objects; effects +distorting objects +shearing objects +transparency; of objects +gradients; transparent +colors; defining gradients interactively +gradients; defining colors +circles; of objects +mw made "slanting;..." a one level entry + +
+

Transformations

+Modifies the shape, orientation or fill of the selected object(s). +
+ +
+ Choose View - Toolbars - Transformations. + + + Click the arrow next to the Transformations icon on the Standard bar. + + + + + Icon Transformations + + + Transformations + + +
+ + +
+ +

Rotate

+Rotates or skews the selected 2D object(s) around a pivot point. Drag a corner handle of the object in the direction you want to rotate it. To skew an object, drag a center handle in the direction you want to skew it. +Each slide has only one pivot point. Double-click an object to move the pivot point to the center of the object. You can also drag the pivot point to a new location on the screen, and then rotate the object. +If you select a group that includes a 3D object, only the 3D object is rotated. You cannot skew a 3D object, instead, you can rotate it about the X and Y axes by dragging the center handles. +
+ + + + +Icon Rotate + + + +Rotate + + +
+ +
+ +

Flip

+Flips the selected object(s) around a flip line, that you can drag to anywhere on the slide. Drag a handle of the object(s) across the flip line to flip the object(s). To change the orientation of the flip line, drag one of its end points to new location. + + + + +Icon Flip + + +Flip + + +
+ + +

In 3D Rotation Object

+Converts the selected 2D object(s) to a 3D object, by rotating the object(s) around a symmetry line. +Drag the symmetry line to a new location to change the shape of the converted object. To change the orientation of the symmetry line, drag one of its end points. Click the object to convert it to 3D. + + + + +Icon In 3D rotation object + + +In 3D Rotation Object + + +
+ + +

Set in circle (perspective)

+Distorts the selected object by wrapping it around imaginary circles, and then adding perspective. Drag a handle of the selected object to distort it. If the selected object is not a polygon or Bézier curve, you are prompted to change the object to a curve before you can distort it. + + + + +Icon Set in circle + + +Set in circle (perspective) + + +
+ + +

Set to circle (slant)

+Distorts the selected object by wrapping it around imaginary circles. Drag a handle of the selected object to distort it. If the selected object is not a polygon or Bézier curve, you are prompted to change the object to a curve before you can distort it. + + + + +Icon Set to circle + + +Set to circle (slant) + + +
+ + +

Distort

+Lets you drag the handles of the selected object to change its shape. If the selected object is not a polygon or Bézier curve, you are prompted to change the object to a curve before you can distort it. + + + + +Icon Distort + + +Distort + + +
+ + +

Transparency

+Applies a transparency gradient to the selected object. The transparency line represents a grayscale, with the black handle corresponding to 0% transparency and the white handle to 100% transparency. +Drag the white handle to change the direction of the transparency gradient. Drag the black handle to change the length of the gradient. You can also drag and drop colors onto the handles from the Color Bar to change their grayscale values. +To display the Color Bar, choose View - Toolbars - Color Bar. + + + + +Icon Transparency + + +Transparency + + +
+ + +

Gradient

+Modifies the gradient fill of the selected object. This command is only available if you applied a gradient to the selected object in Format - Area. Drag the handles of the gradient line to change the direction of the gradient or the length of the gradient. You can also drag and drop colors onto the handles from the Color Bar to change the color of the gradient endpoints. +To display the Color Bar, choose View - Toolbars - Color Bar. + + + + +Icon Gradient + + +Gradient + + +
+ + + diff --git a/helpcontent2/source/text/simpress/02/10030200.xhp b/helpcontent2/source/text/simpress/02/10030200.xhp new file mode 100644 index 000000000..51ff30e34 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10030200.xhp @@ -0,0 +1,232 @@ + + + + + + + + +Gluepoints Bar +/text/simpress/02/10030200.xhp + + + +object bars; editing gluepoints + +Gluepoints Bar + +Insert or modify the properties of a gluepoint. A gluepoint is a point where you can attach a connector line. By default, %PRODUCTNAME automatically places a gluepoint at the center of each side of the bounding rectangle for every object you create. +
+ +
+ + +Insert Gluepoint +Inserts a gluepoint where you click in an object. + + + + +Icon + + + +Insert Point + + +
+ + +Exit Direction Left +Connector attaches to the left edge of the selected gluepoint. + + + + +Icon + + + +Exit Direction Left + + +
+ + +Exit Direction Top +Connector attaches to the top edge of the selected gluepoint. + + + + +Icon + + + +Exit Direction Top + + +
+ + +Exit Direction Right +Connector attaches to the right edge of the selected gluepoint. + + + + +Icon + + + +Exit Direction Right + + +
+ + +Exit Direction Bottom +Connector attaches to the bottom edge of the selected gluepoint. + + + + +Icon + + + +Exit Direction Bottom + + +
+ + +Gluepoint Relative +Maintains the relative position of a selected gluepoint when you resize an object. + + + + +Icon + + + +Gluepoint Relative + + +
+ + +Gluepoint Horizontal Left +When the object is resized, the current gluepoint remains fixed to the left edge of the object. + + + + +Icon + + + +Gluepoint Horizontal Left + + +
+ + +Gluepoint Horizontal Center +When the object is resized, the current gluepoint remains fixed to the center of the object. + + + + +Icon + + + +Gluepoint Horizontal Center + + +
+ + +Gluepoint Horizontal Right +When the object is resized, the current gluepoint remains fixed to the right edge of the object. + + + + +Icon + + + +Gluepoint Horizontal Right + + +
+ + +Gluepoint Vertical Top +When the object is resized, the current gluepoint remains fixed to the top edge of the object. + + + + +Icon + + + +Gluepoint Vertical Top + + +
+ + +Gluepoint Vertical Center +When the object is resized, the current gluepoint remains fixed to the vertical center of the object. + + + + +Icon + + + +Gluepoint Vertical Center + + +
+ + +Gluepoint Vertical Bottom +When the object is resized, the current gluepoint remains fixed to the bottom edge of the object. + + + + +Icon + + + +Gluepoint Vertical Bottom + + +
+ + + diff --git a/helpcontent2/source/text/simpress/02/10050000.xhp b/helpcontent2/source/text/simpress/02/10050000.xhp new file mode 100644 index 000000000..fd279bb1d --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10050000.xhp @@ -0,0 +1,107 @@ + + + + + + + + + + +Text +/text/simpress/02/10050000.xhp + + + +
+text; toolbar +floating text +callouts; inserting in presentations +inserting; callouts in presentations + + +Text +The Text toolbar contains some icons to enter different types of text boxes. +
+ +Text +Draws a text box where you click or drag in the current document. Click anywhere in the document, and then type or paste your text. +
+ + + + +Icon + + + +Text + + +
+
+ +Fit Text to Frame +Draws a text box where you click or drag in the current document. The text that you enter is automatically resized to fit the dimensions of the text box. Click anywhere in the document, and then type or paste your text. + + + + +Icon + + + +Fit Text to Frame + + +
+Callouts +Draws a line that ends in a rectangular callout from where you drag in the current document. The text direction is horizontal. Drag a handle of the callout to resize the callout. To change a rectangular callout to a rounded callout, drag the largest corner handle when the pointer changes to a hand. To add text, click the edge of the callout, and then type or paste your text. + + + + +Icon + + + +Callouts + + +
+ + + + +Fit Vertical Text to Frame +Draws a text box with vertical text direction where you click or drag in the current document. The text that you enter is automatically resized to fit the dimensions of the box. (Enable Asian text support to enable this icon). Click anywhere in the document, and then type or paste your text. You can also move the cursor to where you want to add the text, drag a box, and then type or paste your text. + + + + +Icon + + + +Fit Vertical Text to Frame + + +
+ + diff --git a/helpcontent2/source/text/simpress/02/10060000.xhp b/helpcontent2/source/text/simpress/02/10060000.xhp new file mode 100644 index 000000000..ce1290faf --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10060000.xhp @@ -0,0 +1,170 @@ + + + + + + + + +Rectangles +/text/simpress/02/10060000.xhp + + +Sun Microsystems, Inc. + + + +rectangles +forms; inserting +geometric forms +inserting;rectangles +mw added "inserting;..." and made "rectangles;..." a one level entry + +Rectangles +Using Customize Toolbar, you can add the Legacy Rectangles toolbar. + +Rectangle +Draws a filled rectangle where you drag in the current document. Click where you want to place a corner of the rectangle, and drag to the size you want. To draw a square, hold down Shift while you drag. + + + + +Icon + + + +Rectangle + + +
+ + +Square +Draws a filled square where you drag in the current document. Click where you want to place a corner of the square, and drag to the size you want. To draw a rectangle, hold down Shift while you drag. + + + + +Icon + + + +Square + + +
+ + +Rounded Rectangle +Draws a rounded rectangle with a fill where you drag in the current document. Click where you want to place a corner of the rounded rectangle, and drag to the size you want. To draw a rounded square, hold down Shift while you drag. + + + + +Icon + + + +Rounded Rectangle + + +
+ + +Rounded Square +Draws a rounded square with a fill where you drag in the current document. Click where you want to place a corner of the rounded square, and drag to the size you want. To draw a rounded rectangle, hold down Shift while you drag. + + + + +Icon + + + +Rounded Square + + +
+ + +Rectangle, Unfilled +Draws an empty rectangle where you drag in the current document. Click where you want to place a corner of the rectangle, and drag to the size you want. To draw a square, hold down Shift while you drag. + + + + +Icon + + + +Rectangle, Unfilled + + +
+ + +Square, Unfilled +Draws an empty square where you drag in the current document. Click where you want to place a corner of the square, and drag to the size you want. To draw a rectangle, hold down Shift while you drag. + + + + +Icon + + + +Square, Unfilled + + +
+ + +Rounded Rectangle, Unfilled +Draws an empty rounded rectangle where you drag in the current document. Click where you want to place a corner of the rounded rectangle, and drag to the size you want. To draw a rounded square, hold down Shift while you drag. + + + + +Icon + + + +Rounded Square, Unfilled + + +
+ + +Rounded Square, Unfilled +Draws an empty rounded square where you drag in the current document. Click where you want to place a corner of the rounded square, and drag to the size you want. To draw a rounded rectangle, hold down Shift while you drag. + + + + +Icon + + + +Rounded Square, Unfilled + + +
+ + + diff --git a/helpcontent2/source/text/simpress/02/10070000.xhp b/helpcontent2/source/text/simpress/02/10070000.xhp new file mode 100644 index 000000000..ae6b4fcd6 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10070000.xhp @@ -0,0 +1,249 @@ + + + + + + + + + + +Ellipse +/text/simpress/02/10070000.xhp + + + +toolbars;ellipses +ellipses; toolbars + +
+inserting; ellipses + + +Ellipse +Using Customize Toolbar, you can add the Ellipse icon which opens the Legacy Circles and Ovals toolbar.i60204 +
+Ellipse +Draws a filled oval where you drag in the current document. Click where you want to draw the oval, and drag to the size you want. To draw a circle, hold down Shift while you drag. + + + + +Icon + + + +Ellipse + + +
+ +Circle +Draws a filled circle where you drag in the current document. Click where you want to draw the circle, and drag to the size you want. To draw an ellipse, hold down Shift while you drag. + + + + +Icon + + + +Circle + + +
+Ellipse Pie +Draws a filled shape that is defined by the arc of an oval and two radius lines in the current document. To draw an ellipse pie, drag an oval to the size you want, and then click to define the first radius line. Move your pointer to where you want to place the second radius line and click. You do not need to click on the oval. To draw a circle pie, hold down Shift while you drag. + + + + +Icon + + + +Ellipse Pie + + +
+ +Circle Pie +Draws a filled shape that is defined by the arc of a circle and two radius lines in the current document. To draw a circle pie, drag a circle to the size you want, and then click to define the first radius line. Move your pointer to where you want to place the second radius line and click. You do not need to click on the circle. To draw an ellipse pie, hold down Shift while you drag. + + + + +Icon + + + +Circle pie + + +
+ +Ellipse Segment +Draws a filled shape that is defined by the arc of an oval and a diameter line in the current document. To draw an ellipse segment, drag an ellipse to the size you want, and then click to define the starting point of the diameter line. Move your pointer to where you want to place the endpoint of the diameter line and click. You do not need to click on the ellipse. To draw a circle segment, hold down Shift while you drag. + + + + +Icon + + + +Ellipse segment + + +
+Circle Segment +Draws a filled shape that is defined by the arc of a circle and a diameter line in the current document. To draw a circle segment, drag a circle to the size you want, and then click to define the starting point of the diameter line. Move your pointer to where you want to place the endpoint of the diameter line and click. You do not need to click on the circle. To draw an ellipse segment, hold down Shift while you drag. + + + + +Icon + + + +Circle segment + + +
+ +Ellipse, Unfilled +Draws an empty oval where you drag in the current document. Click where you want to draw the oval, and drag to the size you want. To draw a circle, hold down Shift while you drag. + + + + +Icon + + + +Ellipse, Unfilled + + +
+ +Circle, Unfilled +Draws an empty circle where you drag in the current document. Click where you want to draw the circle, and drag to the size you want. To draw an ellipse, hold down Shift while you drag. + + + + +Icon + + + +Circle, Unfilled + + +
+ +Ellipse Pie, Unfilled +Draws an empty shape that is defined by the arc of an oval and two radius lines in the current document. To draw an ellipse pie, drag an oval to the size you want, and then click to define the first radius line. Move your pointer to where you want to place the second radius line and click. You do not need to click on the oval. To draw a circle pie, hold down Shift while you drag. + + + + +Icon + + + +Ellipse Pie, Unfilled + + +
+ +Circle Pie, Unfilled +Draws an empty shape that is defined by the arc of a circle and two radius lines in the current document. To draw a circle pie, drag a circle to the size you want, and then click to define the first radius line. Move your pointer to where you want to place the second radius line and click. You do not need to click on the circle. To draw an ellipse pie, hold down Shift while you drag. + + + + +Icon + + + +Circle Pie, Unfilled + + +
+ +Ellipse Segment, Unfilled +Draws an empty shape that is defined by the arc of an oval and a diameter line in the current document. To draw an ellipse segment, drag an ellipse to the size you want, and then click to define the starting point of the diameter line. Move your pointer to where you want to place the endpoint of the diameter line and click. You do not need to click on the ellipse. To draw a circle segment, hold down Shift while you drag. + + + + +Icon + + + +Ellipse Segment, Unfilled + + +
+ +Circle Segment, Unfilled +Draws an empty shape that is defined by the arc of a circle and a diameter line in the current document. To draw a circle segment, drag a circle to the size you want, and then click to define the starting point of the diameter line. Move your pointer to where you want to place the endpoint of the diameter line and click. You do not need to click on the circle. To draw a segment that is based on an ellipse, hold down Shift while you drag. + + + + +Icon + + + +Circle Segment, Unfilled + + +
+Arc +Draws an arc in the current document. To draw an arc, drag an oval to the size you want, and then click to define the starting point of the arc. Move your pointer to where you want to place the endpoint and click. You do not need to click on the oval. To draw an arc that is based on a circle, hold down Shift while you drag. + + + + +Icon + + + +Arc + + +
+ +Circle Arc +Draws an arc that is based on a circle in the current document. To draw an arc, drag a circle to the size you want, and then click to define the starting point of the arc. Move your pointer to where you want to place the endpoint and click. You do not need to click on the circle. To draw an arc that is based on an ellipse, hold down Shift while you drag. + + + + +Icon + + + +Circle Arc + + +
+ + diff --git a/helpcontent2/source/text/simpress/02/10080000.xhp b/helpcontent2/source/text/simpress/02/10080000.xhp new file mode 100644 index 000000000..fe48a8e97 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10080000.xhp @@ -0,0 +1,174 @@ + + + + + + + + +Curve +/text/simpress/02/10080000.xhp + + +Sun Microsystems, Inc. + + + +toolbars;curves +curves; toolbar +polygons; inserting +inserting; polygons +freeform lines; drawing +drawing; freeform lines + + +
+ +Curve +The Curve icon on the Drawing bar opens the Lines toolbar, where you can add lines and shapes to the current slide. +
+If you hold the Shift key down, the movement of the mouse is limited to multiples of 45 degrees. If you hold down the OptionsAlt key, the new point will not be connected to the last point. This allows you to create objects that consist of curves that are not connected together. If you draw a smaller object while holding down the OptionAlt key into a larger object that you have not closed yet, the smaller object is subtracted from the larger one, thus appearing as a hole in the larger one. +Closed shapes automatically receive the fill that is displayed in the Area Style/Filling box on Line and Filling bar. + +Curve, Filled +Draws a filled closed shape that is based on a Bézier curve. Click where you want the curve to start, drag, release, and then move the pointer to where you want the curve to end and click. Move the pointer and click again to add a straight line segment to the curve. Double-click to close the shape. + + + + +Icon + + + +Curve, Filled + + +
+ + +Polygon, filled +Draws a closed shape consisting of straight line segments. Click where you want to start the polygon, and drag to draw a line segment. Click again to define the end of the line segment, and continue clicking to define the remaining line segments of the polygon. Double-click to finish drawing the polygon. To constrain the polygon to angles of 45 degree, hold down Shift when you click. + + + + +Icon + + + +Polygon, Filled + + +
+ + +Polygon (45°), Filled +Draws a closed shape consisting of straight line segments that are constrained by angles of 45 degrees. Click where you want to start the polygon, and drag to draw a line segment. Click again to define the end of the line segment, and continue clicking to define the remaining line segments of the polygon. Double-click to finish drawing the polygon. To draw a polygon that is not constrained to a 45 degree angle, hold down Shift when you click. + + + + +Icon + + + +Polygon (45°), Filled + + +
+ + +Freeform Line, Filled +Draws a freeform line where you drag in the slide. When you release, $[officename] creates a closed shape by drawing a straight line segment from the endpoint to the starting point of the line. The shape within the lines will be filled with the current area color. + + + + +Icon + + + +Freeform Line, Filled + + +
+ +Curve + + + + + +Icon + + + +Curve + + +
+ +Polygon + + + + + +Icon + + + +Polygon + + +
+ + +Polygon (45°) +Draws a line composed of a series of straight line segments, that are constrained by angles of 45 degree. Drag to draw a line segment, click to define the endpoint of the line segment, and then drag to draw a new line segment. Double-click to finish drawing the line. To create a closed shape, hold down OptionAlt and double-click. + + + + +Icon + + + +Polygon (45°) + + +
+ +Freeform Line + + + + + +Icon + + + +Freeform Line + + +
+ + + diff --git a/helpcontent2/source/text/simpress/02/10090000.xhp b/helpcontent2/source/text/simpress/02/10090000.xhp new file mode 100644 index 000000000..37ce7df75 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10090000.xhp @@ -0,0 +1,195 @@ + + + + + + + + +3D Objects +/text/simpress/02/10090000.xhp + + + +toolbars;3D objects +3D objects; inserting +inserting;3D objects +cubes +spheres +cylinders +cones +pyramids +torus +shells +half-spheres +drawing;3D objects + + +
+ +3D Objects +Opens the 3D Objects toolbar. The objects are three dimensional, with depth, illumination, and reflection. Each inserted object initially forms a 3D scene. You can press F3 to enter the scene. For these 3D objects, you can open the 3D Effects dialog to edit the properties. +
+
+ + + + +Icon + + + +3D Objects + + +
+ +
+To rotate a 3D object around any of its three axes, click to select the object, and then click again to display its rotation handles. Drag a handle in the direction you want to rotate the object. + +Cube +Draws a filled cube where you drag in the slide. To draw a 3D rectangle, hold down Shift while you drag. + + + + +Icon + + + +Cube + + +
+ + +Sphere +Draws a filled sphere where you drag in the slide. To draw a spheroid, hold down Shift while you drag. + + + + +Icon + + + +Sphere + + +
+ + +Cylinder +Draws a cylinder that is based on a circle where you drag in the slide. To draw a cylinder that is based on an oval, hold down Shift while you drag. + + + + +Icon + + + +Cylinder + + +
+ + +Cone +Draws a cone that is based on a circle where you drag in the slide. To draw a cone that is based on an oval, hold down Shift while you drag. + + + + +Icon + + + +Cone + + +
+ + +Pyramid +Draws a pyramid with a square base where you drag in the slide. To draw a pyramid with a rectangular base, hold down Shift while you drag. To define a different polygon for the base of the pyramid, open the 3D Effects dialog and click the Geometry tab. In the Segments area, enter the number of sides for the polygon in the box labeled Horizontal, and then click the green checkmark. + + + + +Icon + + + +Pyramid + + +
+ + +Torus +Draws a ring-shaped object that is based on a circle where you drag in the slide. To draw a torus that is based on an oval, hold down Shift while you drag. + + + + +Icon + + + +Torus + + +
+ + +Shell +Draws a bowl-shaped object that is based on a circle where you drag in the slide. To draw a shell that is based on an oval, hold down Shift while you drag. + + + + +Icon + + + +Shell + + +
+ + +Half-Sphere +Draws one half of a sphere where you drag in the slide. To draw a one half of a spheroid, hold down Shift while you drag. + + + + +Icon + + + +Half-sphere + + +
+ + + + diff --git a/helpcontent2/source/text/simpress/02/10100000.xhp b/helpcontent2/source/text/simpress/02/10100000.xhp new file mode 100644 index 000000000..fc5d70600 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10100000.xhp @@ -0,0 +1,518 @@ + + + + + + + + +Connectors +/text/simpress/02/10100000.xhp + + + +
+ +Connectors + + + + +Icon + + + +Connector + + +
+ +Open the Connectors toolbar, where you can add connectors to objects in the current slide. A connector is a line that joins objects, and remains attached when the objects are moved. If you copy an object with a connector, the connector is also copied. +
+There are four types of connector lines: + + +Standard (90-degree angle bends) + + +Line (two bends) + + +Straight + + +Curved + + + +When you click a connector and move your mouse pointer over a filled object, or the edge of an unfilled object, gluepoints appear. A gluepoint is a fixed point where you can attach a connector line. You can add custom gluepoints to an object. +To draw a connector line, click a gluepoint on an object, drag to a gluepoint on another object, and then release. You can also drag to an empty part of you document and click. The unattached end of the connector is locked in place, until you drag the end to a different location. To detach a connector, drag either end of the connector line to a different location. + +Connector +Draws a connector with one or more 90-degree angle bends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Connector + + +
+ + +Connector Starts with Arrow +Draws a connector with one or more 90-degree angle bends and an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Connector Starts with Arrow + + +
+ + +Connector Ends with Arrow +Draws a connector with one or more 90-degree angle bends and an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Connector Ends with Arrow + + +
+ + +Connector with Arrows +Draws a connector with one or more 90-degree angle bends and arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Connector with Arrows + + +
+ + +Connector Starts with Circle +Draws a connector with one or more 90-degree angle bends and a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Connector Starts with Circle + + +
+ + +Connector Ends with Circle +Draws a connector with one or more 90-degree angle bends and a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Connector Ends with Circle + + +
+ + +Connector with Circles +Draws a connector with one or more 90-degree angle bends and circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Connector with Circles + + +
+ + +Line Connector +Draws a connector that bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. + + + + +Icon + + + +Line Connector + + +
+ + +Line Connector Starts with Arrow +Draws a connector that starts with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. + + + + +Icon + + + +Line Connector Starts with Arrow + + +
+ + +Line Connector Ends with Arrow +Draws a connector that ends with an arrow and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. + + + + +Icon + + + +Line Connector Ends with Arrow + + +
+ + +Line Connector with Arrows +Draws a connector that bends near a gluepoint and has arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. + + + + +Icon + + + +Line Connector with Arrows + + +
+ + +Line Connector Starts with Circle +Draws a connector that starts with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. + + + + +Icon + + + +Line Connector Starts with Circle + + +
+ + +Line Connector Ends with Circle +Draws a connector that ends with a circle and bends near a gluepoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. + + + + +Icon + + + +Line Connector Ends with Circle + + +
+ + +Line Connector with Circles +Draws a connector that bends near a gluepoint and has circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. To adjust the length of the line segment between a bend point and a gluepoint, click the connector and drag the bend point. + + + + +Icon + + + +Line Connector with Circles + + +
+ + +Straight Connector +Draws a straight line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Straight Connector + + +
+ + +Straight Connector Starts with Arrow +Draws a straight line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Straight Connector Starts with Arrow + + +
+ + +Straight Connector Ends with Arrow +Draws a straight line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Straight Connector Ends with Arrow + + +
+ + +Straight Connector with Arrows +Draws a straight line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Straight Connector with Arrows + + +
+ + +Straight Connector Starts with Circle +Draws a straight line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Straight Connector Starts with Circle + + +
+ + +Straight Connector Ends with Circle +Draws a straight line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Straight Connector Ends with Circle + + +
+ + +Straight Connector with Circles +Draws a straight line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Straight Connector with Circles + + +
+ + +Curved Connector +Draws a curved line connector. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Curved Connector + + +
+ + +Curved Connector Starts with Arrow +Draws a curved line connector with an arrow at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Curved Connector Starts with Arrow + + +
+ + +Curved Connector Ends with Arrow +Draws a curved line connector with an arrow at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Curved Connector Ends with Arrow + + +
+ + +Curved Connector with Arrows +Draws a curved line connector with arrows at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Curved Connector with Arrows + + +
+ + +Curved Connector Starts with Circle +Draws a curved line connector with a circle at the starting point. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Curved Connector Starts with Circle + + +
+ + +Curved Connector Ends with Circle +Draws a curved line connector with a circle at the endpoint. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Curved Connector Ends with Circle + + +
+ + +Curved Connector with Circles +Draws a curved line connector with circles at both ends. Click a gluepoint on an object, drag to a gluepoint on another object, and then release. + + + + +Icon + + + +Curved Connector with Circles + + +
+ +
+ +
+ + diff --git a/helpcontent2/source/text/simpress/02/10110000.xhp b/helpcontent2/source/text/simpress/02/10110000.xhp new file mode 100644 index 000000000..0c36f287b --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10110000.xhp @@ -0,0 +1,73 @@ + + + + + +Insert +/text/simpress/02/10110000.xhp + + + +
+ +

Insert

+
+
+ + + + +Icon + + + +Insert + + +
+
+Open the Insert toolbar, where you can add objects, including charts, spreadsheets, and images, to your document. +

Slide

+ + +

Floating Frame

+ + + + + + +

Spreadsheet

+ + +

From File

+ + + + +

Formula

+ + +

Chart

+ +

OLE Object

+ + + + diff --git a/helpcontent2/source/text/simpress/02/10120000.xhp b/helpcontent2/source/text/simpress/02/10120000.xhp new file mode 100644 index 000000000..c34eb8b46 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/10120000.xhp @@ -0,0 +1,196 @@ + + + + + + + + + +Arrows +/text/simpress/02/10120000.xhp + + + +lines;inserting +arrows; inserting +inserting; lines +inserting; arrows +dimension lines; drawing + + +Arrows +Open the Arrows toolbar, where you can add straight lines, lines with arrows, and dimension lines to the current slide or page. +If you want, you can add an arrow after you draw a line by choosing Format - Line, and then selecting an arrow style from the Style box. +Line +Draws a straight line where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag. + + + + +Icon + + + +Line + + +
+ +Line Ends with Arrow +Draws a straight line that ends with an arrow where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag. + + + + +Icon + + + +Line Ends with Arrow + + +
+ +Line with Arrow/Circle +Draws a straight line that starts with an arrow and ends with a circle where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag. + + + + +Icon + + + +Line with Arrow/Circle + + +
+ +Line with Arrow/Square +Draws a straight line that starts with an arrow and ends with a square where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag. + + + + +Icon + + + +Line with Arrow/Square + + +
+ +Line (45°) +Draws a straight line that is constrained by angles of 45 degrees. + + + + +Icon + + + +Line (45°) + + +
+ +Line Starts with Arrow +Draws a straight line that starts with an arrow where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag. + + + + +Icon + + + +Line Starts with Arrow + + +
+ +Line with Circle/Arrow +Draws a straight line that starts with a circle and ends with an arrow where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag. + + + + +Icon + + + +Line with Circle/Arrow + + +
+ +Line with Square/Arrow +Draws a straight line that starts with a square and ends with an arrow where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag. + + + + +Icon + + + +Line with Square/Arrow + + +
+ +Dimension Line +Draws a line that displays the dimension length bounded by guides. Dimension lines automatically calculate and display linear dimensions. To draw a dimension line, open the Arrows toolbar, and click the Dimension Line icon. Move your pointer to where you want the line to start and drag to draw the dimension line. Release when finished. +If you want the dimension line to be the same length as the side of a nearby object, hold down the Command +Ctrl key while dragging. To constrain the dimension line to 45 degrees, hold down the Shift key while dragging. +In %PRODUCTNAME Draw, a dimension line is always inserted on the layer called Dimension Lines. If you set that layer to invisible, you will not see any dimension line in your drawing. +
+ + + + +Icon + + + +Dimension Line + + +
+
+ +Line with Arrows +Draws a straight line with arrows at both ends where you drag in the current document. To constrain the line to 45 degrees, hold down Shift while you drag. + + + + +Icon + + + +Line with Arrows + + +
+ + diff --git a/helpcontent2/source/text/simpress/02/11060000.xhp b/helpcontent2/source/text/simpress/02/11060000.xhp new file mode 100644 index 000000000..a93fa2b4d --- /dev/null +++ b/helpcontent2/source/text/simpress/02/11060000.xhp @@ -0,0 +1,49 @@ + + + + + +Show Only First Level +/text/simpress/02/11060000.xhp + + +Sun Microsystems, Inc. + + + +
+ levels; hidinghiding; levels + +

Show Only First Level

+ Hides all of the headings of the slides in the current slide show except for the titles of the slides. Hidden headings are indicated by a black line in front of a slide title. To show the headings, click the Show All Levels icon. +
+
+ + + + Icon Show Only First Level + + + Show Only First Level + + +
+
+ + diff --git a/helpcontent2/source/text/simpress/02/11070000.xhp b/helpcontent2/source/text/simpress/02/11070000.xhp new file mode 100644 index 000000000..f9a8bd73e --- /dev/null +++ b/helpcontent2/source/text/simpress/02/11070000.xhp @@ -0,0 +1,49 @@ + + + + + +Show All Levels +/text/simpress/02/11070000.xhp + + +Sun Microsystems, Inc. + + + +
+ levels; showingshowing; levels + +

Show All Levels

+ Displays the hidden headings of the slides in the current slide show. To hide all of the headings in the current slide show, except for the slide titles, click the Show Only First Level icon. +
+
+ + + + Icon Show All Levels + + + Show All Levels + + +
+
+ + diff --git a/helpcontent2/source/text/simpress/02/11080000.xhp b/helpcontent2/source/text/simpress/02/11080000.xhp new file mode 100644 index 000000000..9510d0ad3 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/11080000.xhp @@ -0,0 +1,56 @@ + + + + + +Hide Subpoints +/text/simpress/02/11080000.xhp + + +Sun Microsystems, Inc. + + + + + +
+ subpoints; hidinghiding; subpoints + +

Hide Subpoints

+ Hides the subheadings of a selected heading. Hidden subheadings are indicated by a black line in front of a heading. To show the lower level headings, click the Show Subpoints icon. +
+
+ + + + + + + Icon Hide Subpoints + + + Hide Subpoints + + + +
+
+ + + diff --git a/helpcontent2/source/text/simpress/02/11090000.xhp b/helpcontent2/source/text/simpress/02/11090000.xhp new file mode 100644 index 000000000..48aacc42b --- /dev/null +++ b/helpcontent2/source/text/simpress/02/11090000.xhp @@ -0,0 +1,56 @@ + + + + + +Show Subpoints +/text/simpress/02/11090000.xhp + + +Sun Microsystems, Inc. + + + + + +
+ subpoints; showingshowing; subpoints + +

Show Subpoints

+ Displays the hidden subheadings of a selected heading. To hide the subheadings of a selected heading, click Hide Subpoints icon. +
+
+ + + + + + + Icon Show Subpoints + + + Show Subpoints + + + +
+
+ + + diff --git a/helpcontent2/source/text/simpress/02/11100000.xhp b/helpcontent2/source/text/simpress/02/11100000.xhp new file mode 100644 index 000000000..8d76c0321 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/11100000.xhp @@ -0,0 +1,54 @@ + + + + + + +Show Formatting +/text/simpress/02/11100000.xhp + + +Sun Microsystems, Inc. + + + +
+formatting;slides headings + + +

Show Formatting

+Shows or hides the character formatting of the slide headings. To change the character formatting of a heading, open the Styles window, right-click a style, and then choose Modify. +
+
+ + + + +Show Formatting Icon + + + +Show Formatting + + +
+ +
+ + diff --git a/helpcontent2/source/text/simpress/02/11110000.xhp b/helpcontent2/source/text/simpress/02/11110000.xhp new file mode 100644 index 000000000..c1999e436 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/11110000.xhp @@ -0,0 +1,54 @@ + + + + + + +Black and White +/text/simpress/02/11110000.xhp + + +Sun Microsystems, Inc. + + + +
+views; black and white +black and white view + + +

Black and White

+Shows your slides in black and white only. +
+
+ + + + +Black and White Icon + + +Black and White + + +
+ +
+ + diff --git a/helpcontent2/source/text/simpress/02/13010000.xhp b/helpcontent2/source/text/simpress/02/13010000.xhp new file mode 100644 index 000000000..14fe29037 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13010000.xhp @@ -0,0 +1,51 @@ + + + + + +Gluepoints +/text/simpress/02/13010000.xhp + + +Sun Microsystems, Inc. + + + + + + +

Gluepoints

+ Insert or modify the properties of a gluepoint. A gluepoint is a custom connection point where you can attach a connector line. + + + + + + + Icon Glue Points + + + Show Gluepoints Functions + + + +
+ + + diff --git a/helpcontent2/source/text/simpress/02/13020000.xhp b/helpcontent2/source/text/simpress/02/13020000.xhp new file mode 100644 index 000000000..1a12f0394 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13020000.xhp @@ -0,0 +1,56 @@ + + + + + + + + +Rotation Mode after Clicking Object +/text/simpress/02/13020000.xhp + + +Sun Microsystems, Inc. + + + +
+rotation mode + + +Rotation Mode after Clicking Object +Changes the mouse-click behavior, so that rotation handles appear after you click an object, and then click it again. Drag a handle to rotate the object in the direction you want. +
+
+ + + + +Icon + + + +Rotation Mode after Clicking Object + + +
+ +
+ + diff --git a/helpcontent2/source/text/simpress/02/13030000.xhp b/helpcontent2/source/text/simpress/02/13030000.xhp new file mode 100644 index 000000000..e99ab972d --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13030000.xhp @@ -0,0 +1,56 @@ + + + + + + + + +Allow Effects +/text/simpress/02/13030000.xhp + + +Sun Microsystems, Inc. + + + +allowing; effects +effects; preview + + +Allow Effects +Plays a preview of an animation effect that is assigned to an object, when you click the object in the slide. To select an object for editing, hold down the OptionAlt key when you click. + + + + +Icon + + + +Allow Effects + + +
+ + + + + + diff --git a/helpcontent2/source/text/simpress/02/13040000.xhp b/helpcontent2/source/text/simpress/02/13040000.xhp new file mode 100644 index 000000000..8295ae434 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13040000.xhp @@ -0,0 +1,53 @@ + + + + + + + + +Allow Interaction +/text/simpress/02/13040000.xhp + + +Sun Microsystems, Inc. + + + +interactions; preview +allowing; interaction + + +Allow Interaction +Runs a preview of the interaction that is assigned to an object, when you click the object in the slide. To select an object for editing, hold down the OptionAlt key when you click. + + + + +Icon + + + +Allow Interaction + + +
+ + + diff --git a/helpcontent2/source/text/simpress/02/13050000.xhp b/helpcontent2/source/text/simpress/02/13050000.xhp new file mode 100644 index 000000000..dc3f7d9f0 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13050000.xhp @@ -0,0 +1,57 @@ + + + + + + + + +Show Snap Lines +/text/simpress/02/13050000.xhp + + +Sun Microsystems, Inc. + + + +
+guides; show snap lines icon +showing; guides + + +Show Snap Lines +Shows or hides snap lines so can you align objects on your slide. To remove a snap line, drag it off the slide. +
+
+ + + + +Icon + + + +Show Snap Lines + + +
+ +
+ + diff --git a/helpcontent2/source/text/simpress/02/13060000.xhp b/helpcontent2/source/text/simpress/02/13060000.xhp new file mode 100644 index 000000000..88a86a1c0 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13060000.xhp @@ -0,0 +1,53 @@ + + + + + + + + +Double-Click to add Text +/text/simpress/02/13060000.xhp + + + +
+text; double-clicking to edit + + + +Double-Click to add Text +Changes the mouse-click behavior, so that you can double-click an object to add or edit text. +
+
+ + + + +Icon + + + +Double-click to add Text + + +
+
+ + diff --git a/helpcontent2/source/text/simpress/02/13090000.xhp b/helpcontent2/source/text/simpress/02/13090000.xhp new file mode 100644 index 000000000..bced333af --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13090000.xhp @@ -0,0 +1,54 @@ + + + + + + + + + Modify Object with Attributes + /text/simpress/02/13090000.xhp + + + +
+attributes; objects with + objects; with attributes + + +Modify Object with Attributes + If this icon on the Options bar is activated, objects are shown with their attributes, but with 50% transparency, while you move or draw them. If this icon is not activated, only a contour is shown while drawing, and the object is shown with all attributes when you release the mouse button. +
+
+ + + + +Icon + + + + Modify Object with Attributes + + +
+ +
+ + diff --git a/helpcontent2/source/text/simpress/02/13100000.xhp b/helpcontent2/source/text/simpress/02/13100000.xhp new file mode 100644 index 000000000..29503e686 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13100000.xhp @@ -0,0 +1,55 @@ + + + + + +Exit all Groups +/text/simpress/02/13100000.xhp + + +Sun Microsystems, Inc. + + + + + +
+ +

Exit all Groups

+ Exits all groups and returns to normal view. +
+
+ + + + + + + Icon Exit all groups + + + Exit all groups + + + +
+
+ + + diff --git a/helpcontent2/source/text/simpress/02/13140000.xhp b/helpcontent2/source/text/simpress/02/13140000.xhp new file mode 100644 index 000000000..526fa788e --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13140000.xhp @@ -0,0 +1,44 @@ + + + + + + +Snap to Snap Guides +/text/simpress/02/13140000.xhp + + + +

Snap to Snap Guides

+ +
+ + + + +Icon + + +Snap to Snap Guides + + +
+
+ + diff --git a/helpcontent2/source/text/simpress/02/13150000.xhp b/helpcontent2/source/text/simpress/02/13150000.xhp new file mode 100644 index 000000000..ee378dda4 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13150000.xhp @@ -0,0 +1,53 @@ + + + + + +Snap to Page Margins +/text/simpress/02/13150000.xhp + + +Sun Microsystems, Inc. + + + + + +

Snap to Page Margins

+ + +
+ + + + + + + Icon Snap to Page Margins + + + Snap to Page Margins + + + +
+
+ + + diff --git a/helpcontent2/source/text/simpress/02/13160000.xhp b/helpcontent2/source/text/simpress/02/13160000.xhp new file mode 100644 index 000000000..597aaa8f2 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13160000.xhp @@ -0,0 +1,43 @@ + + + + + +Snap to Object Border +/text/simpress/02/13160000.xhp + + + +

Snap to Object Border

+ + +
+ + + + Icon Snap to Object Border + + + Snap to Object Border + + +
+
+ + diff --git a/helpcontent2/source/text/simpress/02/13170000.xhp b/helpcontent2/source/text/simpress/02/13170000.xhp new file mode 100644 index 000000000..8ae8f4964 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13170000.xhp @@ -0,0 +1,53 @@ + + + + + +Snap to Object Points +/text/simpress/02/13170000.xhp + + +Sun Microsystems, Inc. + + + + + +

Snap to Object Points

+ + +
+ + + + + + + Icon Snap to Object Points + + + Snap to Object Points + + + +
+
+ + + diff --git a/helpcontent2/source/text/simpress/02/13180000.xhp b/helpcontent2/source/text/simpress/02/13180000.xhp new file mode 100644 index 000000000..8a4dde293 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13180000.xhp @@ -0,0 +1,42 @@ + + + + + +Allow Quick Editing +/text/simpress/02/13180000.xhp + + + +

Allow Quick Editing

+ +
+ + + + Icon Allow Quick Editing + + + Allow Quick Editing + + +
+
+ + diff --git a/helpcontent2/source/text/simpress/02/13190000.xhp b/helpcontent2/source/text/simpress/02/13190000.xhp new file mode 100644 index 000000000..8aee1a195 --- /dev/null +++ b/helpcontent2/source/text/simpress/02/13190000.xhp @@ -0,0 +1,53 @@ + + + + + +Select Text Area Only +/text/simpress/02/13190000.xhp + + +Sun Microsystems, Inc. + + + + + +

Select Text Area Only

+ + +
+ + + + + + + Icon Select Text Area Only + + + Select Text Area Only + + + +
+
+ + + -- cgit v1.2.3