From ed5640d8b587fbcfed7dd7967f3de04b37a76f26 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 11:06:44 +0200 Subject: Adding upstream version 4:7.4.7. Signed-off-by: Daniel Baumann --- include/comphelper/configurationhelper.hxx | 239 +++++++++++++++++++++++++++++ 1 file changed, 239 insertions(+) create mode 100644 include/comphelper/configurationhelper.hxx (limited to 'include/comphelper/configurationhelper.hxx') diff --git a/include/comphelper/configurationhelper.hxx b/include/comphelper/configurationhelper.hxx new file mode 100644 index 000000000..162319316 --- /dev/null +++ b/include/comphelper/configurationhelper.hxx @@ -0,0 +1,239 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#ifndef INCLUDED_COMPHELPER_CONFIGURATIONHELPER_HXX +#define INCLUDED_COMPHELPER_CONFIGURATIONHELPER_HXX + +#include +#include +#include +#include +#include + +namespace com::sun::star::uno { class XComponentContext; } +namespace com::sun::star::uno { class XInterface; } + +namespace comphelper +{ + /** specify all possible modes, which can be used to open a configuration access. + * + * @see openConfig() + * @see readDirectKey() + * @see writeDirectKey() + */ + enum class EConfigurationModes + { + /// opens configuration in read/write mode (without LAZY writing!) + Standard = 0, + /// configuration will be opened readonly + ReadOnly = 1, + /// all localized nodes will be interpreted as XInterface instead of interpreting it as atomic value nodes + AllLocales = 2 + }; + + +} + +namespace o3tl +{ + template<> struct typed_flags : is_typed_flags {}; +} + +namespace comphelper +{ + +class COMPHELPER_DLLPUBLIC ConfigurationHelper +{ +public: + /** returns access to the specified configuration package. + * + * This method should be used, if e.g. more than one request to the same + * configuration package is needed. The configuration access can be cached + * outside and used inbetween. + * + * @param rxContext + * the uno service manager, which should be used to create the + * configuration access. + * + * @param sPackage + * the name of the configuration package. + * e.g.
    + *
  • org.openoffice.Office.Common
    • + *
  • org.openoffice.Office.Common/Menu
    • + *
+ * + * @param eMode + * specify the open mode for the returned configuration access. + * It's interpreted as a flag field and can be any useful combination + * of values of EConfigurationModes. + * + * @throw Any exceptions the underlying configuration can throw. + * E.g. css::uno::Exception if the configuration could not be opened. + */ + static css::uno::Reference< css::uno::XInterface > openConfig(const css::uno::Reference< css::uno::XComponentContext >& rxContext, + const OUString& sPackage, + EConfigurationModes eMode ); + + + /** reads the value of an existing(!) configuration key, + * which is searched relative to the specified configuration access. + * + * This method must be used in combination with openConfig(). + * The cached configuration access must be provided here ... and + * all operations are made relative to this access point. + * + * @param xCFG + * the configuration root, where sRelPath should be interpreted. + * as relative path + * + * @param sRelPath + * path relative to xCFG parameter. + * + * @param sKey + * the configuration node, where we should read the value. + * + * @return [css.uno.Any] + * the value of sKey. + * + * @throw Any exceptions the underlying configuration can throw. + * E.g. css::container::NoSuchElementException if the specified + * key does not exists. + */ + static css::uno::Any readRelativeKey(const css::uno::Reference< css::uno::XInterface >& xCFG , + const OUString& sRelPath, + const OUString& sKey ); + + + /** writes a new value for an existing(!) configuration key, + * which is searched relative to the specified configuration access. + * + * This method must be used in combination with openConfig(). + * The cached configuration access must be provided here ... and + * all operations are made relative to this access point. + * + * @param xCFG + * the configuration root, where sRelPath should be interpreted. + * as relative path + * + * @param sRelPath + * path relative to xCFG parameter. + * + * @param sKey + * the configuration node, where we should write the new value. + * + * @param aValue + * the new value for sKey. + * + * @throw Any exceptions the underlying configuration can throw. + * E.g. css::container::NoSuchElementException if the specified + * key does not exists or css::uno::Exception if the provided configuration + * access does not allow writing for this key. + */ + static void writeRelativeKey(const css::uno::Reference< css::uno::XInterface >& xCFG , + const OUString& sRelPath, + const OUString& sKey , + const css::uno::Any& aValue ); + + + /** it checks if the specified set node exists ... or create an empty one + * otherwise. + * + * This method must be used in combination with openConfig(). + * The cached configuration access must be provided here ... and + * all operations are made relative to this access point. + * + * Further this method must be used only with configuration set's. + * Atomic keys can't be "created"... they "exist every time". + * + * @param xCFG + * the configuration root, where sRelPathToSet should be interpreted + * as relative path. + * + * @param sRelPathToSet + * path relative to xCFG parameter. + * + * @param sSetNode + * the set node, which should be checked if its exists ... + * or which should be created with default values. + * + * @return A reference to the found (or new created) set node. + * Can't be NULL .. in such case an exception occurs! + * + * @throw Any exceptions the underlying configuration can throw. + * E.g. css::uno::Exception if the provided configuration + * access does not allow writing for this set. + */ + static css::uno::Reference< css::uno::XInterface > makeSureSetNodeExists(const css::uno::Reference< css::uno::XInterface >& xCFG , + const OUString& sRelPathToSet, + const OUString& sSetNode ); + + + /** commit all changes made on the specified configuration access. + * + * This method must be used in combination with openConfig(). + * The cached configuration access must be provided here. + * + * @param xCFG + * the configuration root, where changes should be committed. + * + * @throw Any exceptions the underlying configuration can throw. + * E.g. css::uno::Exception if the provided configuration + * access does not allow writing for this set. + */ + static void flush(const css::uno::Reference< css::uno::XInterface >& xCFG); + + + /** does the same then openConfig() & readRelativeKey() together. + * + * This method should be used for reading one key at one code place only. + * Because it opens the specified configuration package, reads the key and + * closes the configuration again. + * + * So it's not very useful to use this method for reading multiple keys at the same time. + * (Excepting these keys exists inside different configuration packages ...)) + */ + static css::uno::Any readDirectKey(const css::uno::Reference< css::uno::XComponentContext >& rxContext, + const OUString& sPackage, + const OUString& sRelPath, + const OUString& sKey , + EConfigurationModes eMode ); + + + /** does the same then openConfig() / writeRelativeKey() & flush() together. + * + * This method should be used for writing one key at one code place only. + * Because it opens the specified configuration package, writes the key, flush + * all changes and closes the configuration again. + * + * So it's not very useful to use this method for writing multiple keys at the same time. + * (Excepting these keys exists inside different configuration packages ...)) + */ + static void writeDirectKey(const css::uno::Reference< css::uno::XComponentContext >& rxContext, + const OUString& sPackage, + const OUString& sRelPath, + const OUString& sKey , + const css::uno::Any& aValue , + EConfigurationModes eMode ); +}; + +} // namespace comphelper + +#endif // INCLUDED_COMPHELPER_CONFIGURATIONHELPER_HXX + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ -- cgit v1.2.3