From ed5640d8b587fbcfed7dd7967f3de04b37a76f26 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 11:06:44 +0200 Subject: Adding upstream version 4:7.4.7. Signed-off-by: Daniel Baumann --- tools/source/generic/poly.cxx | 1866 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1866 insertions(+) create mode 100644 tools/source/generic/poly.cxx (limited to 'tools/source/generic/poly.cxx') diff --git a/tools/source/generic/poly.cxx b/tools/source/generic/poly.cxx new file mode 100644 index 000000000..166803b38 --- /dev/null +++ b/tools/source/generic/poly.cxx @@ -0,0 +1,1866 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define EDGE_LEFT 1 +#define EDGE_TOP 2 +#define EDGE_RIGHT 4 +#define EDGE_BOTTOM 8 +#define EDGE_HORZ (EDGE_RIGHT | EDGE_LEFT) +#define EDGE_VERT (EDGE_TOP | EDGE_BOTTOM) +#define SMALL_DVALUE 0.0000001 +#define FSQRT2 1.4142135623730950488016887242097 + +static double ImplGetParameter( const Point& rCenter, const Point& rPt, double fWR, double fHR ) +{ + const double nDX = static_cast(rPt.X()) - rCenter.X(); + const double nDY = static_cast(rCenter.Y()) - rPt.Y(); + double fAngle = atan2(nDY, nDX); + + return atan2(fWR*sin(fAngle), fHR*cos(fAngle)); +} + +ImplPolygon::ImplPolygon( sal_uInt16 nInitSize ) +{ + ImplInitSize(nInitSize, false); +} + +ImplPolygon::ImplPolygon( const ImplPolygon& rImpPoly ) +{ + if ( rImpPoly.mnPoints ) + { + mxPointAry.reset(new Point[rImpPoly.mnPoints]); + memcpy(mxPointAry.get(), rImpPoly.mxPointAry.get(), rImpPoly.mnPoints * sizeof(Point)); + + if( rImpPoly.mxFlagAry ) + { + mxFlagAry.reset(new PolyFlags[rImpPoly.mnPoints]); + memcpy(mxFlagAry.get(), rImpPoly.mxFlagAry.get(), rImpPoly.mnPoints); + } + } + + mnPoints = rImpPoly.mnPoints; +} + +ImplPolygon::ImplPolygon( sal_uInt16 nInitSize, const Point* pInitAry, const PolyFlags* pInitFlags ) +{ + if ( nInitSize ) + { + mxPointAry.reset(new Point[nInitSize]); + memcpy(mxPointAry.get(), pInitAry, nInitSize * sizeof(Point)); + + if( pInitFlags ) + { + mxFlagAry.reset(new PolyFlags[nInitSize]); + memcpy(mxFlagAry.get(), pInitFlags, nInitSize); + } + } + + mnPoints = nInitSize; +} + +ImplPolygon::ImplPolygon( const tools::Rectangle& rRect ) +{ + if ( !rRect.IsEmpty() ) + { + ImplInitSize(5); + mxPointAry[0] = rRect.TopLeft(); + mxPointAry[1] = rRect.TopRight(); + mxPointAry[2] = rRect.BottomRight(); + mxPointAry[3] = rRect.BottomLeft(); + mxPointAry[4] = rRect.TopLeft(); + } + else + mnPoints = 0; +} + +ImplPolygon::ImplPolygon( const tools::Rectangle& rRect, sal_uInt32 nHorzRound, sal_uInt32 nVertRound ) +{ + if ( !rRect.IsEmpty() ) + { + tools::Rectangle aRect( rRect ); + aRect.Justify(); // SJ: i9140 + + nHorzRound = std::min( nHorzRound, static_cast(std::abs( aRect.GetWidth() >> 1 )) ); + nVertRound = std::min( nVertRound, static_cast(std::abs( aRect.GetHeight() >> 1 )) ); + + if( !nHorzRound && !nVertRound ) + { + ImplInitSize(5); + mxPointAry[0] = aRect.TopLeft(); + mxPointAry[1] = aRect.TopRight(); + mxPointAry[2] = aRect.BottomRight(); + mxPointAry[3] = aRect.BottomLeft(); + mxPointAry[4] = aRect.TopLeft(); + } + else + { + const Point aTL( aRect.Left() + nHorzRound, aRect.Top() + nVertRound ); + const Point aTR( aRect.Right() - nHorzRound, aRect.Top() + nVertRound ); + const Point aBR( aRect.Right() - nHorzRound, aRect.Bottom() - nVertRound ); + const Point aBL( aRect.Left() + nHorzRound, aRect.Bottom() - nVertRound ); + tools::Polygon aEllipsePoly( Point(), nHorzRound, nVertRound ); + sal_uInt16 i, nEnd, nSize4 = aEllipsePoly.GetSize() >> 2; + + ImplInitSize(aEllipsePoly.GetSize() + 1); + + const Point* pSrcAry = aEllipsePoly.GetConstPointAry(); + Point* pDstAry = mxPointAry.get(); + + for( i = 0, nEnd = nSize4; i < nEnd; i++ ) + pDstAry[ i ] = pSrcAry[ i ] + aTR; + + for( nEnd = nEnd + nSize4; i < nEnd; i++ ) + pDstAry[ i ] = pSrcAry[ i ] + aTL; + + for( nEnd = nEnd + nSize4; i < nEnd; i++ ) + pDstAry[ i ] = pSrcAry[ i ] + aBL; + + for( nEnd = nEnd + nSize4; i < nEnd; i++ ) + pDstAry[ i ] = pSrcAry[ i ] + aBR; + + pDstAry[ nEnd ] = pDstAry[ 0 ]; + } + } + else + mnPoints = 0; +} + +ImplPolygon::ImplPolygon( const Point& rCenter, tools::Long nRadX, tools::Long nRadY ) +{ + if( nRadX && nRadY ) + { + sal_uInt16 nPoints; + // Compute default (depends on size) + tools::Long nRadXY; + const bool bOverflow = o3tl::checked_multiply(nRadX, nRadY, nRadXY); + if (!bOverflow) + { + nPoints = static_cast(MinMax( + ( M_PI * ( 1.5 * ( nRadX + nRadY ) - + sqrt( static_cast(std::abs(nRadXY)) ) ) ), + 32, 256 )); + } + else + { + nPoints = 256; + } + + if( ( nRadX > 32 ) && ( nRadY > 32 ) && ( nRadX + nRadY ) < 8192 ) + nPoints >>= 1; + + // Ceil number of points until divisible by four + nPoints = (nPoints + 3) & ~3; + ImplInitSize(nPoints); + + sal_uInt16 i; + sal_uInt16 nPoints2 = nPoints >> 1; + sal_uInt16 nPoints4 = nPoints >> 2; + double nAngle; + double nAngleStep = M_PI_2 / ( nPoints4 - 1 ); + + for( i=0, nAngle = 0.0; i < nPoints4; i++, nAngle += nAngleStep ) + { + tools::Long nX = FRound( nRadX * cos( nAngle ) ); + tools::Long nY = FRound( -nRadY * sin( nAngle ) ); + + Point* pPt = &(mxPointAry[i]); + pPt->setX( nX + rCenter.X() ); + pPt->setY( nY + rCenter.Y() ); + pPt = &(mxPointAry[nPoints2-i-1]); + pPt->setX( -nX + rCenter.X() ); + pPt->setY( nY + rCenter.Y() ); + pPt = &(mxPointAry[i+nPoints2]); + pPt->setX( -nX + rCenter.X() ); + pPt->setY( -nY + rCenter.Y() ); + pPt = &(mxPointAry[nPoints-i-1]); + pPt->setX( nX + rCenter.X() ); + pPt->setY( -nY + rCenter.Y() ); + } + } + else + mnPoints = 0; +} + +ImplPolygon::ImplPolygon(const tools::Rectangle& rBound, const Point& rStart, const Point& rEnd, + PolyStyle eStyle, const bool bClockWiseArcDirection) +{ + const auto nWidth = rBound.GetWidth(); + const auto nHeight = rBound.GetHeight(); + + if ((nWidth != 0) && (nHeight != 0)) + { + const Point aCenter(rBound.Center()); + // tdf#142268 Get Top Left corner of rectangle (the rectangle is not always correctly created) + const auto aBoundLeft = rBound.Left() < aCenter.X() ? rBound.Left() : rBound.Right(); + const auto aBoundTop = rBound.Top() < aCenter.Y() ? rBound.Top() : rBound.Bottom(); + const auto nRadX = o3tl::saturating_sub(aCenter.X(), aBoundLeft); + const auto nRadY = o3tl::saturating_sub(aCenter.Y(), aBoundTop); + sal_uInt16 nPoints; + + tools::Long nRadXY; + const bool bOverflow = o3tl::checked_multiply(nRadX, nRadY, nRadXY); + if (!bOverflow) + { + nPoints = static_cast(MinMax( + ( M_PI * ( 1.5 * ( nRadX + nRadY ) - + sqrt( static_cast(std::abs(nRadXY)) ) ) ), + 32, 256 )); + } + else + { + nPoints = 256; + } + + + if (nRadX > 32 && nRadY > 32 && o3tl::saturating_add(nRadX, nRadY) < 8192) + nPoints >>= 1; + + // compute threshold + const double fRadX = nRadX; + const double fRadY = nRadY; + const double fCenterX = aCenter.X(); + const double fCenterY = aCenter.Y(); + double fStart = ImplGetParameter( aCenter, rStart, fRadX, fRadY ); + double fEnd = ImplGetParameter( aCenter, rEnd, fRadX, fRadY ); + double fDiff = fEnd - fStart; + double fStep; + sal_uInt16 nStart; + sal_uInt16 nEnd; + + if (bClockWiseArcDirection == false) + { + // #i73608# If startPoint is equal to endPoint, then draw full circle instead of nothing (as Metafiles spec) + if (fDiff <= 0.) + fDiff += 2. * M_PI; + } + else + { + fDiff = (2. * M_PI) - fDiff; + if (fDiff > 2. * M_PI) + fDiff -= 2. * M_PI; + } + + // Proportionally shrink number of points( fDiff / (2PI) ); + nPoints = std::max(static_cast((fDiff / (2. * M_PI)) * nPoints), sal_uInt16(16)); + fStep = fDiff / (nPoints - 1); + if (bClockWiseArcDirection == true) + fStep = -fStep; + + if (PolyStyle::Pie == eStyle) + { + const Point aCenter2(FRound(fCenterX), FRound(fCenterY)); + + nStart = 1; + nEnd = nPoints + 1; + ImplInitSize(nPoints + 2); + mxPointAry[0] = aCenter2; + mxPointAry[nEnd] = aCenter2; + } + else + { + ImplInitSize( ( PolyStyle::Chord == eStyle ) ? ( nPoints + 1 ) : nPoints ); + nStart = 0; + nEnd = nPoints; + } + + for(; nStart < nEnd; nStart++, fStart += fStep ) + { + Point& rPt = mxPointAry[nStart]; + + rPt.setX( FRound( fCenterX + fRadX * cos( fStart ) ) ); + rPt.setY( FRound( fCenterY - fRadY * sin( fStart ) ) ); + } + + if( PolyStyle::Chord == eStyle ) + mxPointAry[nPoints] = mxPointAry[0]; + } + else + mnPoints = 0; +} + +ImplPolygon::ImplPolygon( const Point& rBezPt1, const Point& rCtrlPt1, + const Point& rBezPt2, const Point& rCtrlPt2, sal_uInt16 nPoints ) +{ + nPoints = ( 0 == nPoints ) ? 25 : ( ( nPoints < 2 ) ? 2 : nPoints ); + + const double fInc = 1.0 / ( nPoints - 1 ); + double fK_1 = 0.0, fK1_1 = 1.0; + double fK_2, fK_3, fK1_2, fK1_3; + const double fX0 = rBezPt1.X(); + const double fY0 = rBezPt1.Y(); + const double fX1 = 3.0 * rCtrlPt1.X(); + const double fY1 = 3.0 * rCtrlPt1.Y(); + const double fX2 = 3.0 * rCtrlPt2.X(); + const double fY2 = 3.0 * rCtrlPt2.Y(); + const double fX3 = rBezPt2.X(); + const double fY3 = rBezPt2.Y(); + + ImplInitSize(nPoints); + + for( sal_uInt16 i = 0; i < nPoints; i++, fK_1 += fInc, fK1_1 -= fInc ) + { + Point& rPt = mxPointAry[i]; + + fK_2 = fK_1; + fK_2 *= fK_1; + fK_3 = fK_2; + fK_3 *= fK_1; + fK1_2 = fK1_1; + fK1_2 *= fK1_1; + fK1_3 = fK1_2; + fK1_3 *= fK1_1; + double fK12 = fK_1 * fK1_2; + double fK21 = fK_2 * fK1_1; + + rPt.setX( FRound( fK1_3 * fX0 + fK12 * fX1 + fK21 * fX2 + fK_3 * fX3 ) ); + rPt.setY( FRound( fK1_3 * fY0 + fK12 * fY1 + fK21 * fY2 + fK_3 * fY3 ) ); + } +} + +// constructor to convert from basegfx::B2DPolygon +// #i76891# Needed to change from adding all control points (even for unused +// edges) and creating a fixed-size Polygon in the first run to creating the +// minimal Polygon. This requires a temporary Point- and Flag-Array for curves +// and a memcopy at ImplPolygon creation, but contains no zero-controlpoints +// for straight edges. +ImplPolygon::ImplPolygon(const basegfx::B2DPolygon& rPolygon) + : mnPoints(0) +{ + const bool bCurve(rPolygon.areControlPointsUsed()); + const bool bClosed(rPolygon.isClosed()); + sal_uInt32 nB2DLocalCount(rPolygon.count()); + + if(bCurve) + { + // #127979# Reduce source point count hard to the limit of the tools Polygon + if(nB2DLocalCount > ((0x0000ffff / 3) - 1)) + { + OSL_FAIL("Polygon::Polygon: Too many points in given B2DPolygon, need to reduce hard to maximum of tools Polygon (!)"); + nB2DLocalCount = ((0x0000ffff / 3) - 1); + } + + // calculate target point count + const sal_uInt32 nLoopCount(bClosed ? nB2DLocalCount : (nB2DLocalCount ? nB2DLocalCount - 1 : 0 )); + + if(nLoopCount) + { + // calculate maximum array size and allocate; prepare insert index + const sal_uInt32 nMaxTargetCount((nLoopCount * 3) + 1); + ImplInitSize(static_cast< sal_uInt16 >(nMaxTargetCount), true); + + // prepare insert index and current point + sal_uInt32 nArrayInsert(0); + basegfx::B2DCubicBezier aBezier; + aBezier.setStartPoint(rPolygon.getB2DPoint(0)); + + for(sal_uInt32 a(0); a < nLoopCount; a++) + { + // add current point (always) and remember StartPointIndex for evtl. later corrections + const Point aStartPoint(FRound(aBezier.getStartPoint().getX()), FRound(aBezier.getStartPoint().getY())); + const sal_uInt32 nStartPointIndex(nArrayInsert); + mxPointAry[nStartPointIndex] = aStartPoint; + mxFlagAry[nStartPointIndex] = PolyFlags::Normal; + nArrayInsert++; + + // prepare next segment + const sal_uInt32 nNextIndex((a + 1) % nB2DLocalCount); + aBezier.setEndPoint(rPolygon.getB2DPoint(nNextIndex)); + aBezier.setControlPointA(rPolygon.getNextControlPoint(a)); + aBezier.setControlPointB(rPolygon.getPrevControlPoint(nNextIndex)); + + if(aBezier.isBezier()) + { + // if one is used, add always two control points due to the old schema + mxPointAry[nArrayInsert] = Point(FRound(aBezier.getControlPointA().getX()), FRound(aBezier.getControlPointA().getY())); + mxFlagAry[nArrayInsert] = PolyFlags::Control; + nArrayInsert++; + + mxPointAry[nArrayInsert] = Point(FRound(aBezier.getControlPointB().getX()), FRound(aBezier.getControlPointB().getY())); + mxFlagAry[nArrayInsert] = PolyFlags::Control; + nArrayInsert++; + } + + // test continuity with previous control point to set flag value + if(aBezier.getControlPointA() != aBezier.getStartPoint() && (bClosed || a)) + { + const basegfx::B2VectorContinuity eCont(rPolygon.getContinuityInPoint(a)); + + if(basegfx::B2VectorContinuity::C1 == eCont) + { + mxFlagAry[nStartPointIndex] = PolyFlags::Smooth; + } + else if(basegfx::B2VectorContinuity::C2 == eCont) + { + mxFlagAry[nStartPointIndex] = PolyFlags::Symmetric; + } + } + + // prepare next polygon step + aBezier.setStartPoint(aBezier.getEndPoint()); + } + + if(bClosed) + { + // add first point again as closing point due to old definition + mxPointAry[nArrayInsert] = mxPointAry[0]; + mxFlagAry[nArrayInsert] = PolyFlags::Normal; + nArrayInsert++; + } + else + { + // add last point as closing point + const basegfx::B2DPoint aClosingPoint(rPolygon.getB2DPoint(nB2DLocalCount - 1)); + const Point aEnd(FRound(aClosingPoint.getX()), FRound(aClosingPoint.getY())); + mxPointAry[nArrayInsert] = aEnd; + mxFlagAry[nArrayInsert] = PolyFlags::Normal; + nArrayInsert++; + } + + DBG_ASSERT(nArrayInsert <= nMaxTargetCount, "Polygon::Polygon from basegfx::B2DPolygon: wrong max point count estimation (!)"); + + if(nArrayInsert != nMaxTargetCount) + { + ImplSetSize(static_cast< sal_uInt16 >(nArrayInsert)); + } + } + } + else + { + // #127979# Reduce source point count hard to the limit of the tools Polygon + if(nB2DLocalCount > (0x0000ffff - 1)) + { + OSL_FAIL("Polygon::Polygon: Too many points in given B2DPolygon, need to reduce hard to maximum of tools Polygon (!)"); + nB2DLocalCount = (0x0000ffff - 1); + } + + if(nB2DLocalCount) + { + // point list creation + const sal_uInt32 nTargetCount(nB2DLocalCount + (bClosed ? 1 : 0)); + ImplInitSize(static_cast< sal_uInt16 >(nTargetCount)); + sal_uInt16 nIndex(0); + + for(sal_uInt32 a(0); a < nB2DLocalCount; a++) + { + basegfx::B2DPoint aB2DPoint(rPolygon.getB2DPoint(a)); + Point aPoint(FRound(aB2DPoint.getX()), FRound(aB2DPoint.getY())); + mxPointAry[nIndex++] = aPoint; + } + + if(bClosed) + { + // add first point as closing point + mxPointAry[nIndex] = mxPointAry[0]; + } + } + } +} + +bool ImplPolygon::operator==( const ImplPolygon& rCandidate) const +{ + return mnPoints == rCandidate.mnPoints && + mxFlagAry.get() == rCandidate.mxFlagAry.get() && + mxPointAry.get() == rCandidate.mxPointAry.get(); +} + +void ImplPolygon::ImplInitSize(sal_uInt16 nInitSize, bool bFlags) +{ + if (nInitSize) + { + mxPointAry.reset(new Point[nInitSize]); + } + + if (bFlags) + { + mxFlagAry.reset(new PolyFlags[nInitSize]); + memset(mxFlagAry.get(), 0, nInitSize); + } + + mnPoints = nInitSize; +} + +void ImplPolygon::ImplSetSize( sal_uInt16 nNewSize, bool bResize ) +{ + if( mnPoints == nNewSize ) + return; + + std::unique_ptr xNewAry; + + if (nNewSize) + { + const std::size_t nNewSz(static_cast(nNewSize)*sizeof(Point)); + xNewAry.reset(new Point[nNewSize]); + + if ( bResize ) + { + // Copy the old points + if ( mnPoints < nNewSize ) + { + // New points are already implicitly initialized to zero + const std::size_t nOldSz(mnPoints * sizeof(Point)); + if (mxPointAry) + memcpy(xNewAry.get(), mxPointAry.get(), nOldSz); + } + else + { + if (mxPointAry) + memcpy(xNewAry.get(), mxPointAry.get(), nNewSz); + } + } + } + + mxPointAry = std::move(xNewAry); + + // take FlagArray into account, if applicable + if( mxFlagAry ) + { + std::unique_ptr xNewFlagAry; + + if( nNewSize ) + { + xNewFlagAry.reset(new PolyFlags[nNewSize]); + + if( bResize ) + { + // copy the old flags + if ( mnPoints < nNewSize ) + { + // initialize new flags to zero + memset(xNewFlagAry.get() + mnPoints, 0, nNewSize-mnPoints); + memcpy(xNewFlagAry.get(), mxFlagAry.get(), mnPoints); + } + else + memcpy(xNewFlagAry.get(), mxFlagAry.get(), nNewSize); + } + } + + mxFlagAry = std::move(xNewFlagAry); + } + + mnPoints = nNewSize; +} + +bool ImplPolygon::ImplSplit( sal_uInt16 nPos, sal_uInt16 nSpace, ImplPolygon const * pInitPoly ) +{ + //Can't fit this in :-(, throw ? + if (mnPoints + nSpace > USHRT_MAX) + { + SAL_WARN("tools", "Polygon needs " << mnPoints + nSpace << " points, but only " << USHRT_MAX << " possible"); + return false; + } + + const sal_uInt16 nNewSize = mnPoints + nSpace; + const std::size_t nSpaceSize = static_cast(nSpace) * sizeof(Point); + + if( nPos >= mnPoints ) + { + // Append at the back + nPos = mnPoints; + ImplSetSize( nNewSize ); + + if( pInitPoly ) + { + memcpy(mxPointAry.get() + nPos, pInitPoly->mxPointAry.get(), nSpaceSize); + + if (pInitPoly->mxFlagAry) + memcpy(mxFlagAry.get() + nPos, pInitPoly->mxFlagAry.get(), nSpace); + } + } + else + { + const sal_uInt16 nSecPos = nPos + nSpace; + const sal_uInt16 nRest = mnPoints - nPos; + + std::unique_ptr xNewAry(new Point[nNewSize]); + memcpy(xNewAry.get(), mxPointAry.get(), nPos * sizeof(Point)); + + if( pInitPoly ) + memcpy(xNewAry.get() + nPos, pInitPoly->mxPointAry.get(), nSpaceSize); + + memcpy(xNewAry.get() + nSecPos, mxPointAry.get() + nPos, nRest * sizeof(Point)); + mxPointAry = std::move(xNewAry); + + // consider FlagArray + if (mxFlagAry) + { + std::unique_ptr xNewFlagAry(new PolyFlags[nNewSize]); + + memcpy(xNewFlagAry.get(), mxFlagAry.get(), nPos); + + if (pInitPoly && pInitPoly->mxFlagAry) + memcpy(xNewFlagAry.get() + nPos, pInitPoly->mxFlagAry.get(), nSpace); + else + memset(xNewFlagAry.get() + nPos, 0, nSpace); + + memcpy(xNewFlagAry.get() + nSecPos, mxFlagAry.get() + nPos, nRest); + mxFlagAry = std::move(xNewFlagAry); + } + + mnPoints = nNewSize; + } + + return true; +} + +void ImplPolygon::ImplCreateFlagArray() +{ + if (!mxFlagAry) + { + mxFlagAry.reset(new PolyFlags[mnPoints]); + memset(mxFlagAry.get(), 0, mnPoints); + } +} + +namespace { + +class ImplPointFilter +{ +public: + virtual void LastPoint() = 0; + virtual void Input( const Point& rPoint ) = 0; + +protected: + ~ImplPointFilter() {} +}; + +class ImplPolygonPointFilter : public ImplPointFilter +{ + ImplPolygon maPoly; + sal_uInt16 mnSize; +public: + explicit ImplPolygonPointFilter(sal_uInt16 nDestSize) + : maPoly(nDestSize) + , mnSize(0) + { + } + + virtual ~ImplPolygonPointFilter() + { + } + + virtual void LastPoint() override; + virtual void Input( const Point& rPoint ) override; + + ImplPolygon& get() { return maPoly; } +}; + +} + +void ImplPolygonPointFilter::Input( const Point& rPoint ) +{ + if ( !mnSize || (rPoint != maPoly.mxPointAry[mnSize-1]) ) + { + mnSize++; + if ( mnSize > maPoly.mnPoints ) + maPoly.ImplSetSize( mnSize ); + maPoly.mxPointAry[mnSize-1] = rPoint; + } +} + +void ImplPolygonPointFilter::LastPoint() +{ + if ( mnSize < maPoly.mnPoints ) + maPoly.ImplSetSize( mnSize ); +}; + +namespace { + +class ImplEdgePointFilter : public ImplPointFilter +{ + Point maFirstPoint; + Point maLastPoint; + ImplPointFilter& mrNextFilter; + const tools::Long mnLow; + const tools::Long mnHigh; + const int mnEdge; + int mnLastOutside; + bool mbFirst; + +public: + ImplEdgePointFilter( int nEdge, tools::Long nLow, tools::Long nHigh, + ImplPointFilter& rNextFilter ) : + mrNextFilter( rNextFilter ), + mnLow( nLow ), + mnHigh( nHigh ), + mnEdge( nEdge ), + mnLastOutside( 0 ), + mbFirst( true ) + { + } + + virtual ~ImplEdgePointFilter() {} + + Point EdgeSection( const Point& rPoint, int nEdge ) const; + int VisibleSide( const Point& rPoint ) const; + bool IsPolygon() const + { return maFirstPoint == maLastPoint; } + + virtual void Input( const Point& rPoint ) override; + virtual void LastPoint() override; +}; + +} + +inline int ImplEdgePointFilter::VisibleSide( const Point& rPoint ) const +{ + if ( mnEdge & EDGE_HORZ ) + { + return rPoint.X() < mnLow ? EDGE_LEFT : + rPoint.X() > mnHigh ? EDGE_RIGHT : 0; + } + else + { + return rPoint.Y() < mnLow ? EDGE_TOP : + rPoint.Y() > mnHigh ? EDGE_BOTTOM : 0; + } +} + +Point ImplEdgePointFilter::EdgeSection( const Point& rPoint, int nEdge ) const +{ + tools::Long lx = maLastPoint.X(); + tools::Long ly = maLastPoint.Y(); + tools::Long md = rPoint.X() - lx; + tools::Long mn = rPoint.Y() - ly; + tools::Long nNewX; + tools::Long nNewY; + + if ( nEdge & EDGE_VERT ) + { + nNewY = (nEdge == EDGE_TOP) ? mnLow : mnHigh; + tools::Long dy = nNewY - ly; + if ( !md ) + nNewX = lx; + else if ( (LONG_MAX / std::abs(md)) >= std::abs(dy) ) + nNewX = (dy * md) / mn + lx; + else + { + BigInt ady = dy; + ady *= md; + if( ady.IsNeg() ) + if( mn < 0 ) + ady += mn/2; + else + ady -= (mn-1)/2; + else + if( mn < 0 ) + ady -= (mn+1)/2; + else + ady += mn/2; + ady /= mn; + nNewX = static_cast(ady) + lx; + } + } + else + { + nNewX = (nEdge == EDGE_LEFT) ? mnLow : mnHigh; + tools::Long dx = nNewX - lx; + if ( !mn ) + nNewY = ly; + else if ( (LONG_MAX / std::abs(mn)) >= std::abs(dx) ) + nNewY = (dx * mn) / md + ly; + else + { + BigInt adx = dx; + adx *= mn; + if( adx.IsNeg() ) + if( md < 0 ) + adx += md/2; + else + adx -= (md-1)/2; + else + if( md < 0 ) + adx -= (md+1)/2; + else + adx += md/2; + adx /= md; + nNewY = static_cast(adx) + ly; + } + } + + return Point( nNewX, nNewY ); +} + +void ImplEdgePointFilter::Input( const Point& rPoint ) +{ + int nOutside = VisibleSide( rPoint ); + + if ( mbFirst ) + { + maFirstPoint = rPoint; + mbFirst = false; + if ( !nOutside ) + mrNextFilter.Input( rPoint ); + } + else if ( rPoint == maLastPoint ) + return; + else if ( !nOutside ) + { + if ( mnLastOutside ) + mrNextFilter.Input( EdgeSection( rPoint, mnLastOutside ) ); + mrNextFilter.Input( rPoint ); + } + else if ( !mnLastOutside ) + mrNextFilter.Input( EdgeSection( rPoint, nOutside ) ); + else if ( nOutside != mnLastOutside ) + { + mrNextFilter.Input( EdgeSection( rPoint, mnLastOutside ) ); + mrNextFilter.Input( EdgeSection( rPoint, nOutside ) ); + } + + maLastPoint = rPoint; + mnLastOutside = nOutside; +} + +void ImplEdgePointFilter::LastPoint() +{ + if ( !mbFirst ) + { + int nOutside = VisibleSide( maFirstPoint ); + + if ( nOutside != mnLastOutside ) + Input( maFirstPoint ); + mrNextFilter.LastPoint(); + } +} + +namespace tools +{ + +tools::Polygon Polygon::SubdivideBezier( const tools::Polygon& rPoly ) +{ + tools::Polygon aPoly; + + // #100127# Use adaptive subdivide instead of fixed 25 segments + rPoly.AdaptiveSubdivide( aPoly ); + + return aPoly; +} + +Polygon::Polygon() : mpImplPolygon(ImplPolygon()) +{ +} + +Polygon::Polygon( sal_uInt16 nSize ) : mpImplPolygon(ImplPolygon(nSize)) +{ +} + +Polygon::Polygon( sal_uInt16 nPoints, const Point* pPtAry, const PolyFlags* pFlagAry ) : mpImplPolygon(ImplPolygon(nPoints, pPtAry, pFlagAry)) +{ +} + +Polygon::Polygon( const tools::Polygon& rPoly ) : mpImplPolygon(rPoly.mpImplPolygon) +{ +} + +Polygon::Polygon( tools::Polygon&& rPoly) noexcept + : mpImplPolygon(std::move(rPoly.mpImplPolygon)) +{ +} + +Polygon::Polygon( const tools::Rectangle& rRect ) : mpImplPolygon(ImplPolygon(rRect)) +{ +} + +Polygon::Polygon( const tools::Rectangle& rRect, sal_uInt32 nHorzRound, sal_uInt32 nVertRound ) + : mpImplPolygon(ImplPolygon(rRect, nHorzRound, nVertRound)) +{ +} + +Polygon::Polygon( const Point& rCenter, tools::Long nRadX, tools::Long nRadY ) + : mpImplPolygon(ImplPolygon(rCenter, nRadX, nRadY)) +{ +} + +Polygon::Polygon(const tools::Rectangle& rBound, const Point& rStart, const Point& rEnd, + PolyStyle eStyle, const bool bClockWiseArcDirection) + : mpImplPolygon(ImplPolygon(rBound, rStart, rEnd, eStyle, bClockWiseArcDirection)) +{ +} + +Polygon::Polygon( const Point& rBezPt1, const Point& rCtrlPt1, + const Point& rBezPt2, const Point& rCtrlPt2, + sal_uInt16 nPoints ) : mpImplPolygon(ImplPolygon(rBezPt1, rCtrlPt1, rBezPt2, rCtrlPt2, nPoints)) +{ +} + +Polygon::~Polygon() +{ +} + +Point * Polygon::GetPointAry() +{ + return mpImplPolygon->mxPointAry.get(); +} + +const Point* Polygon::GetConstPointAry() const +{ + return mpImplPolygon->mxPointAry.get(); +} + +const PolyFlags* Polygon::GetConstFlagAry() const +{ + return mpImplPolygon->mxFlagAry.get(); +} + +void Polygon::SetPoint( const Point& rPt, sal_uInt16 nPos ) +{ + DBG_ASSERT( nPos < mpImplPolygon->mnPoints, + "Polygon::SetPoint(): nPos >= nPoints" ); + + mpImplPolygon->mxPointAry[nPos] = rPt; +} + +void Polygon::SetFlags( sal_uInt16 nPos, PolyFlags eFlags ) +{ + DBG_ASSERT( nPos < mpImplPolygon->mnPoints, + "Polygon::SetFlags(): nPos >= nPoints" ); + + // we do only want to create the flag array if there + // is at least one flag different to PolyFlags::Normal + if ( eFlags != PolyFlags::Normal ) + { + mpImplPolygon->ImplCreateFlagArray(); + mpImplPolygon->mxFlagAry[ nPos ] = eFlags; + } +} + +const Point& Polygon::GetPoint( sal_uInt16 nPos ) const +{ + DBG_ASSERT( nPos < mpImplPolygon->mnPoints, + "Polygon::GetPoint(): nPos >= nPoints" ); + + return mpImplPolygon->mxPointAry[nPos]; +} + +PolyFlags Polygon::GetFlags( sal_uInt16 nPos ) const +{ + DBG_ASSERT( nPos < mpImplPolygon->mnPoints, + "Polygon::GetFlags(): nPos >= nPoints" ); + return mpImplPolygon->mxFlagAry + ? mpImplPolygon->mxFlagAry[ nPos ] + : PolyFlags::Normal; +} + +bool Polygon::HasFlags() const +{ + return bool(mpImplPolygon->mxFlagAry); +} + +bool Polygon::IsRect() const +{ + bool bIsRect = false; + if (!mpImplPolygon->mxFlagAry) + { + if ( ( ( mpImplPolygon->mnPoints == 5 ) && ( mpImplPolygon->mxPointAry[ 0 ] == mpImplPolygon->mxPointAry[ 4 ] ) ) || + ( mpImplPolygon->mnPoints == 4 ) ) + { + if ( ( mpImplPolygon->mxPointAry[ 0 ].X() == mpImplPolygon->mxPointAry[ 3 ].X() ) && + ( mpImplPolygon->mxPointAry[ 0 ].Y() == mpImplPolygon->mxPointAry[ 1 ].Y() ) && + ( mpImplPolygon->mxPointAry[ 1 ].X() == mpImplPolygon->mxPointAry[ 2 ].X() ) && + ( mpImplPolygon->mxPointAry[ 2 ].Y() == mpImplPolygon->mxPointAry[ 3 ].Y() ) ) + bIsRect = true; + } + } + return bIsRect; +} + +void Polygon::SetSize( sal_uInt16 nNewSize ) +{ + if( nNewSize != mpImplPolygon->mnPoints ) + { + mpImplPolygon->ImplSetSize( nNewSize ); + } +} + +sal_uInt16 Polygon::GetSize() const +{ + return mpImplPolygon->mnPoints; +} + +void Polygon::Clear() +{ + mpImplPolygon = ImplType(ImplPolygon()); +} + +double Polygon::CalcDistance( sal_uInt16 nP1, sal_uInt16 nP2 ) const +{ + DBG_ASSERT( nP1 < mpImplPolygon->mnPoints, + "Polygon::CalcDistance(): nPos1 >= nPoints" ); + DBG_ASSERT( nP2 < mpImplPolygon->mnPoints, + "Polygon::CalcDistance(): nPos2 >= nPoints" ); + + const Point& rP1 = mpImplPolygon->mxPointAry[ nP1 ]; + const Point& rP2 = mpImplPolygon->mxPointAry[ nP2 ]; + const double fDx = rP2.X() - rP1.X(); + const double fDy = rP2.Y() - rP1.Y(); + + return sqrt( fDx * fDx + fDy * fDy ); +} + +void Polygon::Optimize( PolyOptimizeFlags nOptimizeFlags ) +{ + sal_uInt16 nSize = mpImplPolygon->mnPoints; + + if( !(bool(nOptimizeFlags) && nSize) ) + return; + + if( nOptimizeFlags & PolyOptimizeFlags::EDGES ) + { + const tools::Rectangle aBound( GetBoundRect() ); + const double fArea = ( aBound.GetWidth() + aBound.GetHeight() ) * 0.5; + const sal_uInt16 nPercent = 50; + + Optimize( PolyOptimizeFlags::NO_SAME ); + ImplReduceEdges( *this, fArea, nPercent ); + } + else if( nOptimizeFlags & PolyOptimizeFlags::NO_SAME ) + { + tools::Polygon aNewPoly; + const Point& rFirst = mpImplPolygon->mxPointAry[ 0 ]; + + while( nSize && ( mpImplPolygon->mxPointAry[ nSize - 1 ] == rFirst ) ) + nSize--; + + if( nSize > 1 ) + { + sal_uInt16 nLast = 0, nNewCount = 1; + + aNewPoly.SetSize( nSize ); + aNewPoly[ 0 ] = rFirst; + + for( sal_uInt16 i = 1; i < nSize; i++ ) + { + if( mpImplPolygon->mxPointAry[ i ] != mpImplPolygon->mxPointAry[ nLast ]) + { + nLast = i; + aNewPoly[ nNewCount++ ] = mpImplPolygon->mxPointAry[ i ]; + } + } + + if( nNewCount == 1 ) + aNewPoly.Clear(); + else + aNewPoly.SetSize( nNewCount ); + } + + *this = aNewPoly; + } + + nSize = mpImplPolygon->mnPoints; + + if( nSize > 1 ) + { + if( ( nOptimizeFlags & PolyOptimizeFlags::CLOSE ) && + ( mpImplPolygon->mxPointAry[ 0 ] != mpImplPolygon->mxPointAry[ nSize - 1 ] ) ) + { + SetSize( mpImplPolygon->mnPoints + 1 ); + mpImplPolygon->mxPointAry[ mpImplPolygon->mnPoints - 1 ] = mpImplPolygon->mxPointAry[ 0 ]; + } + } +} + + +/** Recursively subdivide cubic bezier curve via deCasteljau. + + @param rPoints + Output vector, where the subdivided polylines are written to. + + @param d + Squared difference of curve to a straight line + + @param P* + Exactly four points, interpreted as support and control points of + a cubic bezier curve. Must be in device coordinates, since stop + criterion is based on the following assumption: the device has a + finite resolution, it is thus sufficient to stop subdivision if the + curve does not deviate more than one pixel from a straight line. + +*/ +static void ImplAdaptiveSubdivide( std::vector& rPoints, + const double old_d2, + int recursionDepth, + const double d2, + const double P1x, const double P1y, + const double P2x, const double P2y, + const double P3x, const double P3y, + const double P4x, const double P4y ) +{ + // Hard limit on recursion depth, empiric number. + enum {maxRecursionDepth=128}; + + // Perform bezier flatness test (lecture notes from R. Schaback, + // Mathematics of Computer-Aided Design, Uni Goettingen, 2000) + + // ||P(t) - L(t)|| <= max ||b_j - b_0 - j/n(b_n - b_0)|| + // 0<=j<=n + + // What is calculated here is an upper bound to the distance from + // a line through b_0 and b_3 (P1 and P4 in our notation) and the + // curve. We can drop 0 and n from the running indices, since the + // argument of max becomes zero for those cases. + const double fJ1x( P2x - P1x - 1.0/3.0*(P4x - P1x) ); + const double fJ1y( P2y - P1y - 1.0/3.0*(P4y - P1y) ); + const double fJ2x( P3x - P1x - 2.0/3.0*(P4x - P1x) ); + const double fJ2y( P3y - P1y - 2.0/3.0*(P4y - P1y) ); + const double distance2( ::std::max( fJ1x*fJ1x + fJ1y*fJ1y, + fJ2x*fJ2x + fJ2y*fJ2y) ); + + // stop if error measure does not improve anymore. This is a + // safety guard against floating point inaccuracies. + // stop at recursion level 128. This is a safety guard against + // floating point inaccuracies. + // stop if distance from line is guaranteed to be bounded by d + if( old_d2 > d2 && + recursionDepth < maxRecursionDepth && + distance2 >= d2 && + rPoints.size() < SAL_MAX_UINT16 ) + { + // deCasteljau bezier arc, split at t=0.5 + // Foley/vanDam, p. 508 + const double L1x( P1x ), L1y( P1y ); + const double L2x( (P1x + P2x)*0.5 ), L2y( (P1y + P2y)*0.5 ); + const double Hx ( (P2x + P3x)*0.5 ), Hy ( (P2y + P3y)*0.5 ); + const double L3x( (L2x + Hx)*0.5 ), L3y( (L2y + Hy)*0.5 ); + const double R4x( P4x ), R4y( P4y ); + const double R3x( (P3x + P4x)*0.5 ), R3y( (P3y + P4y)*0.5 ); + const double R2x( (Hx + R3x)*0.5 ), R2y( (Hy + R3y)*0.5 ); + const double R1x( (L3x + R2x)*0.5 ), R1y( (L3y + R2y)*0.5 ); + const double L4x( R1x ), L4y( R1y ); + + // subdivide further + ++recursionDepth; + ImplAdaptiveSubdivide(rPoints, distance2, recursionDepth, d2, L1x, L1y, L2x, L2y, L3x, L3y, L4x, L4y); + ImplAdaptiveSubdivide(rPoints, distance2, recursionDepth, d2, R1x, R1y, R2x, R2y, R3x, R3y, R4x, R4y); + } + else + { + // requested resolution reached. + // Add end points to output iterator. + // order is preserved, since this is so to say depth first traversal. + rPoints.push_back(Point(FRound(P1x), FRound(P1y))); + } +} + +void Polygon::AdaptiveSubdivide( Polygon& rResult, const double d ) const +{ + if (!mpImplPolygon->mxFlagAry) + { + rResult = *this; + } + else + { + sal_uInt16 i; + sal_uInt16 nPts( GetSize() ); + ::std::vector< Point > aPoints; + aPoints.reserve( nPts ); + + for(i=0; imxFlagAry[ i ] ); + PolyFlags P4( mpImplPolygon->mxFlagAry[ i + 3 ] ); + + if( ( PolyFlags::Normal == P1 || PolyFlags::Smooth == P1 || PolyFlags::Symmetric == P1 ) && + ( PolyFlags::Control == mpImplPolygon->mxFlagAry[ i + 1 ] ) && + ( PolyFlags::Control == mpImplPolygon->mxFlagAry[ i + 2 ] ) && + ( PolyFlags::Normal == P4 || PolyFlags::Smooth == P4 || PolyFlags::Symmetric == P4 ) ) + { + ImplAdaptiveSubdivide( aPoints, d*d+1.0, 0, d*d, + mpImplPolygon->mxPointAry[ i ].X(), mpImplPolygon->mxPointAry[ i ].Y(), + mpImplPolygon->mxPointAry[ i+1 ].X(), mpImplPolygon->mxPointAry[ i+1 ].Y(), + mpImplPolygon->mxPointAry[ i+2 ].X(), mpImplPolygon->mxPointAry[ i+2 ].Y(), + mpImplPolygon->mxPointAry[ i+3 ].X(), mpImplPolygon->mxPointAry[ i+3 ].Y() ); + i += 3; + continue; + } + } + + aPoints.push_back(mpImplPolygon->mxPointAry[i++]); + + if (aPoints.size() >= SAL_MAX_UINT16) + { + OSL_ENSURE(aPoints.size() < SAL_MAX_UINT16, + "Polygon::AdaptiveSubdivision created polygon too many points;" + " using original polygon instead"); + + // The resulting polygon can not hold all the points + // that we have created so far. Stop the subdivision + // and return a copy of the unmodified polygon. + rResult = *this; + return; + } + } + + // fill result polygon + rResult = tools::Polygon( static_cast(aPoints.size()) ); // ensure sufficient size for copy + ::std::copy(aPoints.begin(), aPoints.end(), rResult.mpImplPolygon->mxPointAry.get()); + } +} + +namespace { + +class Vector2D +{ +private: + double mfX; + double mfY; +public: + explicit Vector2D( const Point& rPoint ) : mfX( rPoint.X() ), mfY( rPoint.Y() ) {}; + double GetLength() const { return hypot( mfX, mfY ); } + Vector2D& operator-=( const Vector2D& rVec ) { mfX -= rVec.mfX; mfY -= rVec.mfY; return *this; } + double Scalar( const Vector2D& rVec ) const { return mfX * rVec.mfX + mfY * rVec.mfY ; } + Vector2D& Normalize(); + bool IsPositive( Vector2D const & rVec ) const { return ( mfX * rVec.mfY - mfY * rVec.mfX ) >= 0.0; } + bool IsNegative( Vector2D const & rVec ) const { return !IsPositive( rVec ); } +}; + +} + +Vector2D& Vector2D::Normalize() +{ + double fLen = Scalar( *this ); + + if( ( fLen != 0.0 ) && ( fLen != 1.0 ) ) + { + fLen = sqrt( fLen ); + if( fLen != 0.0 ) + { + mfX /= fLen; + mfY /= fLen; + } + } + + return *this; +} + +void Polygon::ImplReduceEdges( tools::Polygon& rPoly, const double& rArea, sal_uInt16 nPercent ) +{ + const double fBound = 2000.0 * ( 100 - nPercent ) * 0.01; + sal_uInt16 nNumNoChange = 0, + nNumRuns = 0; + + while( nNumNoChange < 2 ) + { + sal_uInt16 nPntCnt = rPoly.GetSize(), nNewPos = 0; + tools::Polygon aNewPoly( nPntCnt ); + bool bChangeInThisRun = false; + + for( sal_uInt16 n = 0; n < nPntCnt; n++ ) + { + bool bDeletePoint = false; + + if( ( n + nNumRuns ) % 2 ) + { + sal_uInt16 nIndPrev = !n ? nPntCnt - 1 : n - 1; + sal_uInt16 nIndPrevPrev = !nIndPrev ? nPntCnt - 1 : nIndPrev - 1; + sal_uInt16 nIndNext = ( n == nPntCnt-1 ) ? 0 : n + 1; + sal_uInt16 nIndNextNext = ( nIndNext == nPntCnt - 1 ) ? 0 : nIndNext + 1; + Vector2D aVec1( rPoly[ nIndPrev ] ); aVec1 -= Vector2D(rPoly[ nIndPrevPrev ]); + Vector2D aVec2( rPoly[ n ] ); aVec2 -= Vector2D(rPoly[ nIndPrev ]); + Vector2D aVec3( rPoly[ nIndNext ] ); aVec3 -= Vector2D(rPoly[ n ]); + Vector2D aVec4( rPoly[ nIndNextNext ] ); aVec4 -= Vector2D(rPoly[ nIndNext ]); + double fDist1 = aVec1.GetLength(), fDist2 = aVec2.GetLength(); + double fDist3 = aVec3.GetLength(), fDist4 = aVec4.GetLength(); + double fTurnB = aVec2.Normalize().Scalar( aVec3.Normalize() ); + + if( fabs( fTurnB ) < ( 1.0 + SMALL_DVALUE ) && fabs( fTurnB ) > ( 1.0 - SMALL_DVALUE ) ) + bDeletePoint = true; + else + { + Vector2D aVecB( rPoly[ nIndNext ] ); + aVecB -= Vector2D(rPoly[ nIndPrev ] ); + double fDistB = aVecB.GetLength(); + double fLenWithB = fDist2 + fDist3; + double fLenFact = ( fDistB != 0.0 ) ? fLenWithB / fDistB : 1.0; + double fTurnPrev = aVec1.Normalize().Scalar( aVec2 ); + double fTurnNext = aVec3.Scalar( aVec4.Normalize() ); + double fGradPrev, fGradB, fGradNext; + + if( fabs( fTurnPrev ) < ( 1.0 + SMALL_DVALUE ) && fabs( fTurnPrev ) > ( 1.0 - SMALL_DVALUE ) ) + fGradPrev = 0.0; + else + fGradPrev = basegfx::rad2deg(acos(fTurnPrev)) * (aVec1.IsNegative(aVec2) ? -1 : 1); + + fGradB = basegfx::rad2deg(acos(fTurnB)) * (aVec2.IsNegative(aVec3) ? -1 : 1); + + if( fabs( fTurnNext ) < ( 1.0 + SMALL_DVALUE ) && fabs( fTurnNext ) > ( 1.0 - SMALL_DVALUE ) ) + fGradNext = 0.0; + else + fGradNext = basegfx::rad2deg(acos(fTurnNext)) * (aVec3.IsNegative(aVec4) ? -1 : 1); + + if( ( fGradPrev > 0.0 && fGradB < 0.0 && fGradNext > 0.0 ) || + ( fGradPrev < 0.0 && fGradB > 0.0 && fGradNext < 0.0 ) ) + { + if( ( fLenFact < ( FSQRT2 + SMALL_DVALUE ) ) && + ( ( ( fDist1 + fDist4 ) / ( fDist2 + fDist3 ) ) * 2000.0 ) > fBound ) + { + bDeletePoint = true; + } + } + else + { + double fRelLen = 1.0 - sqrt( fDistB / rArea ); + + if( fRelLen < 0.0 ) + fRelLen = 0.0; + else if( fRelLen > 1.0 ) + fRelLen = 1.0; + + if( ( std::round( ( fLenFact - 1.0 ) * 1000000.0 ) < fBound ) && + ( fabs( fGradB ) <= ( fRelLen * fBound * 0.01 ) ) ) + { + bDeletePoint = true; + } + } + } + } + + if( !bDeletePoint ) + aNewPoly[ nNewPos++ ] = rPoly[ n ]; + else + bChangeInThisRun = true; + } + + if( bChangeInThisRun && nNewPos ) + { + aNewPoly.SetSize( nNewPos ); + rPoly = aNewPoly; + nNumNoChange = 0; + } + else + nNumNoChange++; + + nNumRuns++; + } +} + +void Polygon::Move( tools::Long nHorzMove, tools::Long nVertMove ) +{ + // This check is required for DrawEngine + if ( !nHorzMove && !nVertMove ) + return; + + // Move points + sal_uInt16 nCount = mpImplPolygon->mnPoints; + for ( sal_uInt16 i = 0; i < nCount; i++ ) + { + Point& rPt = mpImplPolygon->mxPointAry[i]; + rPt.AdjustX(nHorzMove ); + rPt.AdjustY(nVertMove ); + } +} + +void Polygon::Translate(const Point& rTrans) +{ + for ( sal_uInt16 i = 0, nCount = mpImplPolygon->mnPoints; i < nCount; i++ ) + mpImplPolygon->mxPointAry[ i ] += rTrans; +} + +void Polygon::Scale( double fScaleX, double fScaleY ) +{ + for ( sal_uInt16 i = 0, nCount = mpImplPolygon->mnPoints; i < nCount; i++ ) + { + Point& rPnt = mpImplPolygon->mxPointAry[i]; + rPnt.setX( static_cast( fScaleX * rPnt.X() ) ); + rPnt.setY( static_cast( fScaleY * rPnt.Y() ) ); + } +} + +void Polygon::Rotate( const Point& rCenter, Degree10 nAngle10 ) +{ + nAngle10 %= 3600_deg10; + + if( nAngle10 ) + { + const double fAngle = toRadians(nAngle10); + Rotate( rCenter, sin( fAngle ), cos( fAngle ) ); + } +} + +void Polygon::Rotate( const Point& rCenter, double fSin, double fCos ) +{ + tools::Long nCenterX = rCenter.X(); + tools::Long nCenterY = rCenter.Y(); + + for( sal_uInt16 i = 0, nCount = mpImplPolygon->mnPoints; i < nCount; i++ ) + { + Point& rPt = mpImplPolygon->mxPointAry[ i ]; + + const tools::Long nX = rPt.X() - nCenterX; + const tools::Long nY = rPt.Y() - nCenterY; + rPt.setX( FRound( fCos * nX + fSin * nY ) + nCenterX ); + rPt.setY( - FRound( fSin * nX - fCos * nY ) + nCenterY ); + } +} + +void Polygon::Clip( const tools::Rectangle& rRect ) +{ + // This algorithm is broken for bezier curves, they would get converted to lines. + // Use PolyPolygon::Clip(). + assert( !HasFlags()); + + // #105251# Justify rect before edge filtering + tools::Rectangle aJustifiedRect( rRect ); + aJustifiedRect.Justify(); + + sal_uInt16 nSourceSize = mpImplPolygon->mnPoints; + ImplPolygonPointFilter aPolygon( nSourceSize ); + ImplEdgePointFilter aHorzFilter( EDGE_HORZ, aJustifiedRect.Left(), aJustifiedRect.Right(), + aPolygon ); + ImplEdgePointFilter aVertFilter( EDGE_VERT, aJustifiedRect.Top(), aJustifiedRect.Bottom(), + aHorzFilter ); + + for ( sal_uInt16 i = 0; i < nSourceSize; i++ ) + aVertFilter.Input( mpImplPolygon->mxPointAry[i] ); + if ( aVertFilter.IsPolygon() ) + aVertFilter.LastPoint(); + else + aPolygon.LastPoint(); + + mpImplPolygon = ImplType(aPolygon.get()); +} + +tools::Rectangle Polygon::GetBoundRect() const +{ + // Removing the assert. Bezier curves have the attribute that each single + // curve segment defined by four points can not exit the four-point polygon + // defined by that points. This allows to say that the curve segment can also + // never leave the Range of its defining points. + // The result is that Polygon::GetBoundRect() may not create the minimal + // BoundRect of the Polygon (to get that, use basegfx::B2DPolygon classes), + // but will always create a valid BoundRect, at least as long as this method + // 'blindly' travels over all points, including control points. + + // DBG_ASSERT( !mpImplPolygon->mxFlagAry.get(), "GetBoundRect could fail with beziers!" ); + + sal_uInt16 nCount = mpImplPolygon->mnPoints; + if( ! nCount ) + return tools::Rectangle(); + + tools::Long nXMin, nXMax, nYMin, nYMax; + + const Point& pFirstPt = mpImplPolygon->mxPointAry[0]; + nXMin = nXMax = pFirstPt.X(); + nYMin = nYMax = pFirstPt.Y(); + + for ( sal_uInt16 i = 0; i < nCount; i++ ) + { + const Point& rPt = mpImplPolygon->mxPointAry[i]; + + if (rPt.X() < nXMin) + nXMin = rPt.X(); + if (rPt.X() > nXMax) + nXMax = rPt.X(); + if (rPt.Y() < nYMin) + nYMin = rPt.Y(); + if (rPt.Y() > nYMax) + nYMax = rPt.Y(); + } + + return tools::Rectangle( nXMin, nYMin, nXMax, nYMax ); +} + +bool Polygon::Contains( const Point& rPoint ) const +{ + DBG_ASSERT( !mpImplPolygon->mxFlagAry, "IsInside could fail with beziers!" ); + + const tools::Rectangle aBound( GetBoundRect() ); + const Line aLine( rPoint, Point( aBound.Right() + 100, rPoint.Y() ) ); + sal_uInt16 nCount = mpImplPolygon->mnPoints; + sal_uInt16 nPCounter = 0; + + if ( ( nCount > 2 ) && aBound.Contains( rPoint ) ) + { + Point aPt1( mpImplPolygon->mxPointAry[ 0 ] ); + Point aIntersection; + Point aLastIntersection; + + while ( ( aPt1 == mpImplPolygon->mxPointAry[ nCount - 1 ] ) && ( nCount > 3 ) ) + nCount--; + + for ( sal_uInt16 i = 1; i <= nCount; i++ ) + { + const Point& rPt2 = mpImplPolygon->mxPointAry[ ( i < nCount ) ? i : 0 ]; + + if ( aLine.Intersection( Line( aPt1, rPt2 ), aIntersection ) ) + { + // This avoids insertion of double intersections + if ( nPCounter ) + { + if ( aIntersection != aLastIntersection ) + { + aLastIntersection = aIntersection; + nPCounter++; + } + } + else + { + aLastIntersection = aIntersection; + nPCounter++; + } + } + + aPt1 = rPt2; + } + } + + // is inside, if number of intersection points is odd + return ( ( nPCounter & 1 ) == 1 ); +} + +void Polygon::Insert( sal_uInt16 nPos, const Point& rPt ) +{ + if( nPos >= mpImplPolygon->mnPoints ) + nPos = mpImplPolygon->mnPoints; + + if (mpImplPolygon->ImplSplit(nPos, 1)) + mpImplPolygon->mxPointAry[ nPos ] = rPt; +} + +void Polygon::Insert( sal_uInt16 nPos, const tools::Polygon& rPoly ) +{ + const sal_uInt16 nInsertCount = rPoly.mpImplPolygon->mnPoints; + + if( nInsertCount ) + { + if( nPos >= mpImplPolygon->mnPoints ) + nPos = mpImplPolygon->mnPoints; + + if (rPoly.mpImplPolygon->mxFlagAry) + mpImplPolygon->ImplCreateFlagArray(); + + mpImplPolygon->ImplSplit( nPos, nInsertCount, rPoly.mpImplPolygon.get() ); + } +} + +Point& Polygon::operator[]( sal_uInt16 nPos ) +{ + assert( nPos < mpImplPolygon->mnPoints ); + + return mpImplPolygon->mxPointAry[nPos]; +} + +tools::Polygon& Polygon::operator=( const tools::Polygon& rPoly ) +{ + mpImplPolygon = rPoly.mpImplPolygon; + return *this; +} + +tools::Polygon& Polygon::operator=( tools::Polygon&& rPoly ) noexcept +{ + mpImplPolygon = std::move(rPoly.mpImplPolygon); + return *this; +} + +bool Polygon::operator==( const tools::Polygon& rPoly ) const +{ + return (mpImplPolygon == rPoly.mpImplPolygon); +} + +bool Polygon::IsEqual( const tools::Polygon& rPoly ) const +{ + bool bIsEqual = true; + sal_uInt16 i; + if ( GetSize() != rPoly.GetSize() ) + bIsEqual = false; + else + { + for ( i = 0; i < GetSize(); i++ ) + { + if ( ( GetPoint( i ) != rPoly.GetPoint( i ) ) || + ( GetFlags( i ) != rPoly.GetFlags( i ) ) ) + { + bIsEqual = false; + break; + } + } + } + return bIsEqual; +} + +SvStream& ReadPolygon( SvStream& rIStream, tools::Polygon& rPoly ) +{ + sal_uInt16 nPoints(0); + + // read all points and create array + rIStream.ReadUInt16( nPoints ); + + const size_t nMaxRecordsPossible = rIStream.remainingSize() / (2 * sizeof(sal_Int32)); + if (nPoints > nMaxRecordsPossible) + { + SAL_WARN("tools", "Polygon claims " << nPoints << " records, but only " << nMaxRecordsPossible << " possible"); + nPoints = nMaxRecordsPossible; + } + + rPoly.mpImplPolygon->ImplSetSize( nPoints, false ); + + for (sal_uInt16 i = 0; i < nPoints; i++) + { + sal_Int32 nTmpX(0), nTmpY(0); + rIStream.ReadInt32(nTmpX).ReadInt32(nTmpY); + rPoly.mpImplPolygon->mxPointAry[i].setX(nTmpX); + rPoly.mpImplPolygon->mxPointAry[i].setY(nTmpY); + } + + return rIStream; +} + +SvStream& WritePolygon( SvStream& rOStream, const tools::Polygon& rPoly ) +{ + sal_uInt16 nPoints = rPoly.GetSize(); + + // Write number of points + rOStream.WriteUInt16( nPoints ); + + for (sal_uInt16 i = 0; i < nPoints; i++) + { + rOStream.WriteInt32(rPoly.mpImplPolygon->mxPointAry[i].X()) + .WriteInt32(rPoly.mpImplPolygon->mxPointAry[i].Y()); + } + + return rOStream; +} + +void Polygon::ImplRead( SvStream& rIStream ) +{ + sal_uInt8 bHasPolyFlags(0); + + ReadPolygon( rIStream, *this ); + rIStream.ReadUChar( bHasPolyFlags ); + + if ( bHasPolyFlags ) + { + mpImplPolygon->mxFlagAry.reset(new PolyFlags[mpImplPolygon->mnPoints]); + auto nRead = rIStream.ReadBytes(mpImplPolygon->mxFlagAry.get(), mpImplPolygon->mnPoints); + if (nRead != mpImplPolygon->mnPoints) + { + SAL_WARN("tools", "Short read"); + memset(mpImplPolygon->mxFlagAry.get() + nRead, 0, mpImplPolygon->mnPoints - nRead); + } + } +} + +void Polygon::Read( SvStream& rIStream ) +{ + VersionCompatRead aCompat(rIStream); + + ImplRead( rIStream ); +} + +void Polygon::ImplWrite( SvStream& rOStream ) const +{ + bool bHasPolyFlags(mpImplPolygon->mxFlagAry); + WritePolygon( rOStream, *this ); + rOStream.WriteBool(bHasPolyFlags); + + if ( bHasPolyFlags ) + rOStream.WriteBytes(mpImplPolygon->mxFlagAry.get(), mpImplPolygon->mnPoints); +} + +void Polygon::Write( SvStream& rOStream ) const +{ + VersionCompatWrite aCompat(rOStream, 1); + + ImplWrite( rOStream ); +} + +// #i74631#/#i115917# numerical correction method for B2DPolygon +static void impCorrectContinuity(basegfx::B2DPolygon& roPolygon, sal_uInt32 nIndex, PolyFlags nCFlag) +{ + const sal_uInt32 nPointCount(roPolygon.count()); + OSL_ENSURE(nIndex < nPointCount, "impCorrectContinuity: index access out of range (!)"); + + if(nIndex >= nPointCount || (PolyFlags::Smooth != nCFlag && PolyFlags::Symmetric != nCFlag)) + return; + + if(!roPolygon.isPrevControlPointUsed(nIndex) || !roPolygon.isNextControlPointUsed(nIndex)) + return; + + // #i115917# Patch from osnola (modified, thanks for showing the problem) + + // The correction is needed because an integer polygon with control points + // is converted to double precision. When C1 or C2 is used the involved vectors + // may not have the same directions/lengths since these come from integer coordinates + // and may have been snapped to different nearest integer coordinates. The snap error + // is in the range of +-1 in y and y, thus 0.0 <= error <= sqrt(2.0). Nonetheless, + // it needs to be corrected to be able to detect the continuity in this points + // correctly. + + // We only have the integer data here (already in double precision form, but no mantissa + // used), so the best correction is to use: + + // for C1: The longest vector since it potentially has best preserved the original vector. + // Even better the sum of the vectors, weighted by their length. This gives the + // normal vector addition to get the vector itself, lengths need to be preserved. + // for C2: The mediated vector(s) since both should be the same, but mirrored + + // extract the point and vectors + const basegfx::B2DPoint aPoint(roPolygon.getB2DPoint(nIndex)); + const basegfx::B2DVector aNext(roPolygon.getNextControlPoint(nIndex) - aPoint); + const basegfx::B2DVector aPrev(aPoint - roPolygon.getPrevControlPoint(nIndex)); + + // calculate common direction vector, normalize + const basegfx::B2DVector aDirection(aNext + aPrev); + const double fDirectionLen = aDirection.getLength(); + if (fDirectionLen == 0.0) + return; + + if (PolyFlags::Smooth == nCFlag) + { + // C1: apply common direction vector, preserve individual lengths + const double fInvDirectionLen(1.0 / fDirectionLen); + roPolygon.setNextControlPoint(nIndex, basegfx::B2DPoint(aPoint + (aDirection * (aNext.getLength() * fInvDirectionLen)))); + roPolygon.setPrevControlPoint(nIndex, basegfx::B2DPoint(aPoint - (aDirection * (aPrev.getLength() * fInvDirectionLen)))); + } + else // PolyFlags::Symmetric + { + // C2: get mediated length. Taking half of the unnormalized direction would be + // an approximation, but not correct. + const double fMedLength((aNext.getLength() + aPrev.getLength()) * (0.5 / fDirectionLen)); + const basegfx::B2DVector aScaledDirection(aDirection * fMedLength); + + // Bring Direction to correct length and apply + roPolygon.setNextControlPoint(nIndex, basegfx::B2DPoint(aPoint + aScaledDirection)); + roPolygon.setPrevControlPoint(nIndex, basegfx::B2DPoint(aPoint - aScaledDirection)); + } +} + +// convert to basegfx::B2DPolygon and return +basegfx::B2DPolygon Polygon::getB2DPolygon() const +{ + basegfx::B2DPolygon aRetval; + const sal_uInt16 nCount(mpImplPolygon->mnPoints); + + if (nCount) + { + if (mpImplPolygon->mxFlagAry) + { + // handling for curves. Add start point + const Point aStartPoint(mpImplPolygon->mxPointAry[0]); + PolyFlags nPointFlag(mpImplPolygon->mxFlagAry[0]); + aRetval.append(basegfx::B2DPoint(aStartPoint.X(), aStartPoint.Y())); + Point aControlA, aControlB; + + for(sal_uInt16 a(1); a < nCount;) + { + bool bControlA(false); + bool bControlB(false); + + if(PolyFlags::Control == mpImplPolygon->mxFlagAry[a]) + { + aControlA = mpImplPolygon->mxPointAry[a++]; + bControlA = true; + } + + if(a < nCount && PolyFlags::Control == mpImplPolygon->mxFlagAry[a]) + { + aControlB = mpImplPolygon->mxPointAry[a++]; + bControlB = true; + } + + // assert invalid polygons + OSL_ENSURE(bControlA == bControlB, "Polygon::getB2DPolygon: Invalid source polygon (!)"); + + if(a < nCount) + { + const Point aEndPoint(mpImplPolygon->mxPointAry[a]); + + if(bControlA) + { + // bezier edge, add + aRetval.appendBezierSegment( + basegfx::B2DPoint(aControlA.X(), aControlA.Y()), + basegfx::B2DPoint(aControlB.X(), aControlB.Y()), + basegfx::B2DPoint(aEndPoint.X(), aEndPoint.Y())); + + impCorrectContinuity(aRetval, aRetval.count() - 2, nPointFlag); + } + else + { + // no bezier edge, add end point + aRetval.append(basegfx::B2DPoint(aEndPoint.X(), aEndPoint.Y())); + } + + nPointFlag = mpImplPolygon->mxFlagAry[a++]; + } + } + + // if exist, remove double first/last points, set closed and correct control points + basegfx::utils::checkClosed(aRetval); + + if(aRetval.isClosed()) + { + // closeWithGeometryChange did really close, so last point(s) were removed. + // Correct the continuity in the changed point + impCorrectContinuity(aRetval, 0, mpImplPolygon->mxFlagAry[0]); + } + } + else + { + // extra handling for non-curves (most-used case) for speedup + for(sal_uInt16 a(0); a < nCount; a++) + { + // get point and add + const Point aPoint(mpImplPolygon->mxPointAry[a]); + aRetval.append(basegfx::B2DPoint(aPoint.X(), aPoint.Y())); + } + + // set closed flag + basegfx::utils::checkClosed(aRetval); + } + } + + return aRetval; +} + +Polygon::Polygon(const basegfx::B2DPolygon& rPolygon) : mpImplPolygon(ImplPolygon(rPolygon)) +{ +} + +} // namespace tools + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ -- cgit v1.2.3