Contains configuration items related to the Impress application. Describes master pages that belong to the list of recently used master pages. The URL of the template document that contains the master page. The internal name of the master page. A factory that can create one more resources for the multi pane framework. URL of a multi pane framework resource. A factory that can create one more resources for the multi pane framework. The service name of the factory. This service is not the factory itself. It is expected to create and register a set of factories when an instance of the service is created. List of URLs of the resources that are created by the factory. A service that is instantiated when a framework is initialized for a Draw or Impress document. The name of the startup service. A Remote Control Device that has been authorised for connection. The PIN used by the device for authentication. Contains general properties of the graphical object representation. Contains general properties of the graphical object representation of screen displays. Indicates whether to show the rulers at the left and at the top of the working area. false Indicates whether to show help-lines that can be created by dragging them from the rulers. false Indicates whether to show help-lines when moving an object. false Indicates whether to show all control points in the Bezier curve editor. false Indicates whether to show the outline of all moved objects when moving more than one object at the same time. true Specifies other layout options that do not fit into any other group. Specifies the distance between adjacent tab stops with regard to whether the metric or the non-metric system is currently selected. Specifies the distance between adjacent tab stops in 1/100 mm when the metric system is selected. 1250 Specifies the distance between adjacent tab stops in 1/100 mm when the non-metric system is selected. 1270 Specifies the measurement unit to be used with respect to whether the metric or the non-metric system is selected. Specifies the measurement unit to be used when the metric system is selected. Millimeter Centimeter Point Pica Inch 2 Specifies the measurement unit to be used when the non-metric system is selected. Millimeter Centimeter Point Pica Inch 8 Contains content related configuration items. Contains configuration items related to the display of Impress documents. Indicates whether to show only the bounding box of graphic-objects like bitmaps and drawings. false Indicates whether to show only outlines of objects such as filled rectangles and filled ellipses. false Indicates whether to show only a placeholder for text in graphical objects. false Indicates whether to show only hairlines instead of the true line styles. false Contains a collection of configuration items for the Impress application that do not fit into another category. Indicates whether to store master pages in a cache to speed up drawing. true Indicates whether moving while holding the Control key makes a copy of the moved object. true Indicates whether objects can still be moved while in rotating mode. true Indicates whether objects that are placed on a circle keep their original form, i.e. may be moved and rotated but not resized or otherwise distorted. false Indicates whether a double-click on a text object activates the edit mode. true Indicates whether a double-click on an object activates the rotation mode. true Specifies the color quality of the preview: 0 - Color, 868 - Grayscale, 5381 - Black/White. Color Grayscale Black/White 0 Indicates whether to show comments (true) or hide them (false). true Indicates whether the object creation and modification will be visualized using the full object attribute set or wireframe. true Indicates whether the warning dialog appears when setting a new standard page layout. true Indicates whether the slideshow should respect shape z-order while animating shapes. Disabling this can improve slideshow performance true Contains a list of odf files, that define slideshow transitions. Values are put through macro expansion, so, vnd.sun.star.expand prefix is allowed. vnd.sun.star.expand:$BRAND_BASE_DIR/$BRAND_SHARE_SUBDIR/config/soffice.cfg/simpress/transitions.xml Contains a list of odf files, that define slideshow shape effects. Values are put through macro expansion, so, vnd.sun.star.expand prefix is allowed. vnd.sun.star.expand:$BRAND_BASE_DIR/$BRAND_SHARE_SUBDIR/config/soffice.cfg/simpress/effects.xml Contains a list of xml files defining the Impress slide "layouts". It contains properties of presentation objects, like their position, width, and height. Entries are run through macro expansion, so, vnd.sun.star.expand prefix is allowed. vnd.sun.star.expand:$BRAND_BASE_DIR/$BRAND_SHARE_SUBDIR/config/soffice.cfg/simpress/layoutlist.xml Contains a list of xml files defining the presentation object used in the master page of "notes" and "handout". It contains properties of presentation objects,like their position, width, and height. Entries are run through macro expansion, so, vnd.sun.star.expand prefix is allowed. vnd.sun.star.expand:$BRAND_BASE_DIR/$BRAND_SHARE_SUBDIR/config/soffice.cfg/simpress/objectlist.xml Indicates whether a selected effect in the animation create dialog should be previewed. true Indicates whether changes in the animation panel should be previewed. true Indicates whether changes in the slide transition panel should be previewed. true Offset number of the display used for full screen slide show mode; -1 means all screens, 0 means default external screen, N>0 means real-screen number + 1. 0 Color of the pen during slideshow. 16711680 Width of the pen during slideshow. 150 Indicates whether the tab bar should be visible on top of the slide panel. false Contains text editing related configuration items. Indicates whether a simple click on a text object changes it to edit mode. true Indicates whether a text frame can only be selected by clicking on the text or by clicking somewhere in the frame. false Specifies configuration items governing the behavior when creating a new document or a new page. Indicates whether to show the template selection when creating a new presentation. true Indicates whether to show the layout dialog when creating a new page. true Specifies configuration items governing behavior when starting a presentation. Indicates whether to enable the Impress remote controller. false Indicates whether to show Presenter Screen Console which shows next slide, notes etc. true Contains the group of options that control the compatibility to other applications. Specifies if spacing between paragraphs should be added to ensure compatibility to MS Word documents false Indicates whether to use printer independent metrics for document formatting (2) or to use metrics derived from the current printer (1). Refer to com::sun::star::document::PrinterIndependentLayout for valid values. 2 Defines the default size of newly created objects using CTRL-Return or CTRL-Click at an object-creating Button. [UNIT=1/100 mm] 8000 [UNIT=1/100 mm] 5000 Contains a list of remote control devices that can connect without user confirmation. Specifies how to force object positions and sizes to the snap grid or to align with other objects. Specifies how to force object positions and sizes to predefined locations in relation to other objects. Indicates whether to snap an object when moved to the next grid point. true Indicates whether to snap at snap lines. true Indicates whether the outline of an object is justified with adjacent page margins. true Indicates whether to justify the outline of an object to that of an adjacent object. true Indicates whether to snap corner points of adjacent objects. false Specifies the maximal range in pixels along the coordinate axes at which snapping becomes active. Specifies that the minimum snap range is 1. Specifies that the maximal snap range is 50. 5 Specifies constraints regarding the creation and modification of graphical objects. Indicates whether to restrict the creation of objects to squares, circles, etc. and to retain the x/y ratio when resizing. false Indicates whether to use the longer (true) or the shorter (false) of the two distances along the coordinates axes from the initial to the current position to determine a new square's edge length or a new circle's diameter. true Indicates whether to use steps while rotating an object. false Specifies the rotation angle when constrained rotation is enabled. [UNIT=Degree/100] Specifies that the minimum rotation angle is 0/100 degrees. Specifies that the maximum rotation angle is 18000/100 degrees. 1500 Specifies the maximum angle that you can move a line before it snaps into place in the point editor that connects two points [UNIT=Degree/100]. Specifies that the minimum angle is 100/100 degrees. Specifies that the maximum angle is 9000/100 degrees. 1500 Defines the handling and display of the snap grid. Specifies switches regarding use and display of the snap grid. Indicates whether to force frames and drawing elements on grid points. true Indicates whether to show the grid. false Indicates whether to synchronize the resolutions of x- and y-grids. false Specifies grid resolution. Defines the horizontal distance between adjacent grid points. Defines the horizontal distance between adjacent grid points in 1/100 mm, used when the metric system is active. 2000 Defines the horizontal distance between adjacent grid points in 1/100 mm, used when the non-metric system is active. 2540 Defines the vertical distance between adjacent grid points. Defines the vertical distance between adjacent grid points in 1/100 mm, used when the metric system is active. 2000 Defines the vertical distance between adjacent grid points in 1/100 mm, used when the non-metric system is active. 2540 Specifies the subdivision of the grid. Specifies the number of points between two adjacent grid points on the X axis. 3 Specifies the number of intervals between two adjacent grid points on the Y axis 3 Contains the specifications of the snap grid. Indicates whether to synchronize grid and snap-grid. true Defines the horizontal distance between adjacent points of the snap grid. Defines the horizontal distance between adjacent points of the snap grid in 1/100 mm, used when the metric system is selected. 100 Defines the horizontal distance between adjacent points of the snap grid in 1/100 mm, used when the non-metric system is selected. 1270 Defines the vertical distance between adjacent points of the snap grid. Defines the vertical distance between adjacent points of the snap grid in 1/100 mm, used when the metric system is selected. 100 Defines the vertical distance between adjacent points of the snap grid in 1/100 mm, used when the non-metric system is selected. 1270 Defines options regarding the printing of Impress documents. Defines options regarding the printing of document content. Indicates whether the presentation will be printed. true Indicates whether the notes will be printed. false Indicates whether the handouts will be printed. false Indicates whether the outlines will be printed. false Specifies how and which pages will be printed. Indicates whether to enlarge or shrink a document's page size while printing to fit the physical paper size. false Indicates whether to print the pages' titles at the top of every page. false Indicates whether to print a document in the form of a brochure. false Indicates whether to print the front side pages of a brochure. true Indicates whether to print the back side pages of a brochure. true Specifies general printing related issues. Indicates whether to print page names. false Indicates whether to print the current date at the top of every page. false Indicates whether to print the current time at the top of every page. false Indicates whether to print hidden pages. true Specifies the quality of the printed colors. Color Grayscale Black/White 0 Indicates whether to use the system settings of the printer to choose the paper tray. false Indicates whether the slide thumbnails on the printed handouts are ordered horizontal or vertical false Specifies the number of slide thumbnails printed on each handout page. One slide Two slides Three slides, including lines for notes Four slides Six slides Nine slides 0 Contains the group of options that control the behavior of filters. Contains the group of options that control the behavior of the import filters. Contains the group of options that control the behavior of the VBA filter. Converts VBA Basic into Office Basic as commands (True). true Holds original VBA storage for saving in the memory (True). true Exports related configuration items. Specifies the filter last used to export an Impress document. HTML MS Windows bitmap Portable Network Graphic Encapsulated PostScript Graphic Interchange Format JPEG OS/2 Metafile Mac Pict Portable Bitmap Portable Graymap Portable Pixelmap Sun Rasterfile StarView Metafile MS Windows Metafile XPM Options that control the content and appearance of the multi pane GUI. Options that control the tool panel. Options that control the visibility of the ToolPanel. Visibility of the ToolPanel in the Impress view. Visibility of the ToolPanel in the Outline view. Visibility of the ToolPanel in the Notes view. Visibility of the ToolPanel in the HandOut view. Visibility of the ToolPanel in the SlideSorter view. List of the URLs of the most recently used master pages. Options that control the multi pane framework. Set of factories and the resources created by them. Set of services that are instantiated every time the framework of a Draw or Impress document is initialized. Values related to the slide sorter. Options that control the visibility of the slide sorter. Visibility of the Slide Sorter in the Impress view. Visibility of the Slide Sorter in the Outline view. Visibility of the Slide Sorter in the Notes view. Visibility of the Slide Sorter in the HandOut view. Visibility of the Slide Sorter in the SlideSorter view. Visibility of the Slide Sorter in the Draw view. Values for tuning the preview cache of the slide sorter. Maximal size of the cache that stores slide preview bitmaps. This size does only cover previews of slides that are not currently visible. Depending on the compression policy this upper bound may be violated. 4194304 Technique of how to reduce the memory used by the cache. Ignore the maximal cache size. Use the compression policy to compress preview bitmaps that are not visible. Compress Technique of how to compress preview bitmaps for slides that are moved out of the visible area in order to save cache space. Keep bitmaps unmodified in cache. This effectively ignores the maximal cache size. Remove preview from cache Reduce the resolution to a width of 100 Pixels Store preview as compressed PNG bitmap ResolutionReduction Time in milliseconds to wait between processing preview creation requests with high priority. 10 Time in milliseconds to wait between processing preview creation requests with low priority. 100 Time in milliseconds to wait between processing preview creation requests when show is running. 1000 Contains configuration items for Impress Photo Album function. Access path, where images were loaded last time. The default is work directory. $(work)