Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

12 files changed, 1138 insertions, 0 deletions

diff --git a/Documentation/arm/samsung-s3c24xx/cpufreq.rst b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
new file mode 100644
index 000000000..cd22697cf
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
@@ -0,0 +1,77 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+=======================
+S3C24XX CPUfreq support
+=======================
+
+Introduction
+------------
+
+ The S3C24XX series support a number of power saving systems, such as
+ the ability to change the core, memory and peripheral operating
+ frequencies. The core control is exported via the CPUFreq driver
+ which has a number of different manual or automatic controls over the
+ rate the core is running at.
+
+ There are two forms of the driver depending on the specific CPU and
+ how the clocks are arranged. The first implementation used as single
+ PLL to feed the ARM, memory and peripherals via a series of dividers
+ and muxes and this is the implementation that is documented here. A
+ newer version where there is a separate PLL and clock divider for the
+ ARM core is available as a separate driver.
+
+
+Layout
+------
+
+ The code core manages the CPU specific drivers, any data that they
+ need to register and the interface to the generic drivers/cpufreq
+ system. Each CPU registers a driver to control the PLL, clock dividers
+ and anything else associated with it. Any board that wants to use this
+ framework needs to supply at least basic details of what is required.
+
+ The core registers with drivers/cpufreq at init time if all the data
+ necessary has been supplied.
+
+
+CPU support
+-----------
+
+ The support for each CPU depends on the facilities provided by the
+ SoC and the driver as each device has different PLL and clock chains
+ associated with it.
+
+
+Slow Mode
+---------
+
+ The SLOW mode where the PLL is turned off altogether and the
+ system is fed by the external crystal input is currently not
+ supported.
+
+
+sysfs
+-----
+
+ The core code exports extra information via sysfs in the directory
+ devices/system/cpu/cpu0/arch-freq.
+
+
+Board Support
+-------------
+
+ Each board that wants to use the cpufreq code must register some basic
+ information with the core driver to provide information about what the
+ board requires and any restrictions being placed on it.
+
+ The board needs to supply information about whether it needs the IO bank
+ timings changing, any maximum frequency limits and information about the
+ SDRAM refresh rate.
+
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2009 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
new file mode 100644
index 000000000..7863c9365
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
@@ -0,0 +1,59 @@
+===================================
+Simtec Electronics EB2410ITX (BAST)
+===================================
+
+	http://www.simtec.co.uk/products/EB2410ITX/
+
+Introduction
+------------
+
+  The EB2410ITX is a S3C2410 based development board with a variety of
+  peripherals and expansion connectors. This board is also known by
+  the shortened name of Bast.
+
+
+Configuration
+-------------
+
+  To set the default configuration, use `make bast_defconfig` which
+  supports the commonly used features of this board.
+
+
+Support
+-------
+
+  Official support information can be found on the Simtec Electronics
+  website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
+
+  Useful links:
+
+    - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
+
+    - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
+
+    - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
+      and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
+
+
+MTD
+---
+
+  The NAND and NOR support has been merged from the linux-mtd project.
+  Any problems, see http://www.linux-mtd.infradead.org/ for more
+  information or up-to-date versions of linux-mtd.
+
+
+IDE
+---
+
+  Both onboard IDE ports are supported, however there is no support for
+  changing speed of devices, PIO Mode 4 capable drives should be used.
+
+
+Maintainers
+-----------
+
+  This board is maintained by Simtec Electronics.
+
+
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst
new file mode 100644
index 000000000..f4a8c800a
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/gpio.rst
@@ -0,0 +1,172 @@
+====================
+S3C24XX GPIO Control
+====================
+
+Introduction
+------------
+
+  The s3c2410 kernel provides an interface to configure and
+  manipulate the state of the GPIO pins, and find out other
+  information about them.
+
+  There are a number of conditions attached to the configuration
+  of the s3c2410 GPIO system, please read the Samsung provided
+  data-sheet/users manual to find out the complete list.
+
+  See Documentation/arm/samsung/gpio.rst for the core implementation.
+
+
+GPIOLIB
+-------
+
+  With the event of the GPIOLIB in drivers/gpio, support for some
+  of the GPIO functions such as reading and writing a pin will
+  be removed in favour of this common access method.
+
+  Once all the extant drivers have been converted, the functions
+  listed below will be removed (they may be marked as __deprecated
+  in the near future).
+
+  The following functions now either have a `s3c_` specific variant
+  or are merged into gpiolib. See the definitions in
+  arch/arm/mach-s3c/gpio-cfg.h:
+
+  - s3c2410_gpio_setpin()	gpio_set_value() or gpio_direction_output()
+  - s3c2410_gpio_getpin()	gpio_get_value() or gpio_direction_input()
+  - s3c2410_gpio_getirq()	gpio_to_irq()
+  - s3c2410_gpio_cfgpin()	s3c_gpio_cfgpin()
+  - s3c2410_gpio_getcfg()	s3c_gpio_getcfg()
+  - s3c2410_gpio_pullup()	s3c_gpio_setpull()
+
+
+GPIOLIB conversion
+------------------
+
+If you need to convert your board or driver to use gpiolib from the phased
+out s3c2410 API, then here are some notes on the process.
+
+1) If your board is exclusively using an GPIO, say to control peripheral
+   power, then it will require to claim the gpio with gpio_request() before
+   it can use it.
+
+   It is recommended to check the return value, with at least WARN_ON()
+   during initialisation.
+
+2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
+   as they have the same arguments, and can either take the pin specific
+   values, or the more generic special-function-number arguments.
+
+3) s3c2410_gpio_pullup() changes have the problem that while the
+   s3c2410_gpio_pullup(x, 1) can be easily translated to the
+   s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
+   are not so easy.
+
+   The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
+   of some of the devices, a pull-down) and as such the new API distinguishes
+   between the UP and DOWN case. There is currently no 'just turn on' setting
+   which may be required if this becomes a problem.
+
+4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
+   does not implicitly configure the relevant gpio to output. The gpio
+   direction should be changed before using gpio_set_value().
+
+5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
+   has been set to input. It is currently unknown what the behaviour is
+   when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
+   would return the value the pin is supposed to be outputting).
+
+6) s3c2410_gpio_getirq() should be directly replaceable with the
+   gpio_to_irq() call.
+
+The s3c2410_gpio and `gpio_` calls have always operated on the same gpio
+numberspace, so there is no problem with converting the gpio numbering
+between the calls.
+
+
+Headers
+-------
+
+  See arch/arm/mach-s3c/regs-gpio-s3c24xx.h for the list
+  of GPIO pins, and the configuration values for them. This
+  is included by using #include <mach/regs-gpio.h>
+
+
+PIN Numbers
+-----------
+
+  Each pin has an unique number associated with it in regs-gpio.h,
+  e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
+  the GPIO functions which pin is to be used.
+
+  With the conversion to gpiolib, there is no longer a direct conversion
+  from gpio pin number to register base address as in earlier kernels. This
+  is due to the number space required for newer SoCs where the later
+  GPIOs are not contiguous.
+
+
+Configuring a pin
+-----------------
+
+  The following function allows the configuration of a given pin to
+  be changed.
+
+    void s3c_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+  e.g.:
+
+     s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1));
+     s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2));
+
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
+
+
+Reading the current configuration
+---------------------------------
+
+  The current configuration of a pin can be read by using standard
+  gpiolib function:
+
+  s3c_gpio_getcfg(unsigned int pin);
+
+  The return value will be from the same set of values which can be
+  passed to s3c_gpio_cfgpin().
+
+
+Configuring a pull-up resistor
+------------------------------
+
+  A large proportion of the GPIO pins on the S3C2410 can have weak
+  pull-up resistors enabled. This can be configured by the following
+  function:
+
+    void s3c_gpio_setpull(unsigned int pin, unsigned int to);
+
+  Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off,
+  and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other
+  values are currently undefined.
+
+
+Getting and setting the state of a PIN
+--------------------------------------
+
+  These calls are now implemented by the relevant gpiolib calls, convert
+  your board or driver to use gpiolib.
+
+
+Getting the IRQ number associated with a PIN
+--------------------------------------------
+
+  A standard gpiolib function can map the given pin number to an IRQ
+  number to pass to the IRQ system.
+
+   int gpio_to_irq(unsigned int pin);
+
+  Note, not all pins have an IRQ.
+
+
+Author
+-------
+
+Ben Dooks, 03 October 2004
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/h1940.rst b/Documentation/arm/samsung-s3c24xx/h1940.rst
new file mode 100644
index 000000000..62a562c17
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/h1940.rst
@@ -0,0 +1,41 @@
+=============
+HP IPAQ H1940
+=============
+
+http://www.handhelds.org/projects/h1940.html
+
+Introduction
+------------
+
+  The HP H1940 is a S3C2410 based handheld device, with
+  bluetooth connectivity.
+
+
+Support
+-------
+
+  A variety of information is available
+
+  handhelds.org project page:
+
+    http://www.handhelds.org/projects/h1940.html
+
+  handhelds.org wiki page:
+
+    http://handhelds.org/moin/moin.cgi/HpIpaqH1940
+
+  Herbert Pötzl pages:
+
+    http://vserver.13thfloor.at/H1940/
+
+
+Maintainers
+-----------
+
+  This project is being maintained and developed by a variety
+  of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl.
+
+  Thanks to the many others who have also provided support.
+
+
+(c) 2005 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/index.rst b/Documentation/arm/samsung-s3c24xx/index.rst
new file mode 100644
index 000000000..ccb951a0b
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/index.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Samsung S3C24XX SoC Family
+==========================
+
+.. toctree::
+   :maxdepth: 1
+
+   h1940
+   gpio
+   cpufreq
+   suspend
+   usb-host
+   s3c2412
+   eb2410itx
+   nand
+   smdk2440
+   s3c2413
+   overview
diff --git a/Documentation/arm/samsung-s3c24xx/nand.rst b/Documentation/arm/samsung-s3c24xx/nand.rst
new file mode 100644
index 000000000..938995694
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/nand.rst
@@ -0,0 +1,30 @@
+====================
+S3C24XX NAND Support
+====================
+
+Introduction
+------------
+
+Small Page NAND
+---------------
+
+The driver uses a 512 byte (1 page) ECC code for this setup. The
+ECC code is not directly compatible with the default kernel ECC
+code, so the driver enforces its own OOB layout and ECC parameters
+
+Large Page NAND
+---------------
+
+The driver is capable of handling NAND flash with a 2KiB page
+size, with support for hardware ECC generation and correction.
+
+Unlike the 512byte page mode, the driver generates ECC data for
+each 256 byte block in an 2KiB page. This means that more than
+one error in a page can be rectified. It also means that the
+OOB layout remains the default kernel layout for these flashes.
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2007 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst
new file mode 100644
index 000000000..14535e5cf
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/overview.rst
@@ -0,0 +1,311 @@
+==========================
+S3C24XX ARM Linux Overview
+==========================
+
+
+
+Introduction
+------------
+
+  The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
+  by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
+  S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices
+  are supported.
+
+  Support for the S3C2400 and S3C24A0 series was never completed and the
+  corresponding code has been removed after a while.  If someone wishes to
+  revive this effort, partial support can be retrieved from earlier Linux
+  versions.
+
+  The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
+  included under the arch/arm/mach-s3c directory. Note, while core
+  support for these SoCs is in, work on some of the extra peripherals
+  and extra interrupts is still ongoing.
+
+
+Configuration
+-------------
+
+  A generic S3C2410 configuration is provided, and can be used as the
+  default by `make s3c2410_defconfig`. This configuration has support
+  for all the machines, and the commonly used features on them.
+
+  Certain machines may have their own default configurations as well,
+  please check the machine specific documentation.
+
+
+Layout
+------
+
+  The core support files, register, kernel and paltform data are located in the
+  platform code contained in arch/arm/mach-s3c with headers in
+  arch/arm/mach-s3c/include
+
+arch/arm/mach-s3c:
+
+  Files in here are either common to all the s3c24xx family,
+  or are common to only some of them with names to indicate this
+  status. The files that are not common to all are generally named
+  with the initial cpu they support in the series to ensure a short
+  name without any possibility of confusion with newer devices.
+
+  As an example, initially s3c244x would cover s3c2440 and s3c2442, but
+  with the s3c2443 which does not share many of the same drivers in
+  this directory, the name becomes invalid. We stick to s3c2440-<x>
+  to indicate a driver that is s3c2440 and s3c2442 compatible.
+
+  This does mean that to find the status of any given SoC, a number
+  of directories may need to be searched.
+
+
+Machines
+--------
+
+  The currently supported machines are as follows:
+
+  Simtec Electronics EB2410ITX (BAST)
+
+    A general purpose development board, see EB2410ITX.txt for further
+    details
+
+  Simtec Electronics IM2440D20 (Osiris)
+
+    CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash
+    and a PCMCIA controller.
+
+  Samsung SMDK2410
+
+    Samsung's own development board, geared for PDA work.
+
+  Samsung/Aiji SMDK2412
+
+    The S3C2412 version of the SMDK2440.
+
+  Samsung/Aiji SMDK2413
+
+    The S3C2412 version of the SMDK2440.
+
+  Samsung/Meritech SMDK2440
+
+    The S3C2440 compatible version of the SMDK2440, which has the
+    option of an S3C2440 or S3C2442 CPU module.
+
+  Thorcom VR1000
+
+    Custom embedded board
+
+  HP IPAQ 1940
+
+    Handheld (IPAQ), available in several varieties
+
+  HP iPAQ rx3715
+
+    S3C2440 based IPAQ, with a number of variations depending on
+    features shipped.
+
+  Acer N30
+
+    A S3C2410 based PDA from Acer.  There is a Wiki page at
+    http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
+
+  AML M5900
+
+    American Microsystems' M5900
+
+  Nex Vision Nexcoder
+  Nex Vision Otom
+
+    Two machines by Nex Vision
+
+
+Adding New Machines
+-------------------
+
+  The architecture has been designed to support as many machines as can
+  be configured for it in one kernel build, and any future additions
+  should keep this in mind before altering items outside of their own
+  machine files.
+
+  Machine definitions should be kept in arch/arm/mach-s3c,
+  and there are a number of examples that can be looked at.
+
+  Read the kernel patch submission policies as well as the
+  Documentation/arm directory before submitting patches. The
+  ARM kernel series is managed by Russell King, and has a patch system
+  located at http://www.arm.linux.org.uk/developer/patches/
+  as well as mailing lists that can be found from the same site.
+
+  As a courtesy, please notify <ben-linux@fluff.org> of any new
+  machines or other modifications.
+
+  Any large scale modifications, or new drivers should be discussed
+  on the ARM kernel mailing list (linux-arm-kernel) before being
+  attempted. See http://www.arm.linux.org.uk/mailinglists/ for the
+  mailing list information.
+
+
+I2C
+---
+
+  The hardware I2C core in the CPU is supported in single master
+  mode, and can be configured via platform data.
+
+
+RTC
+---
+
+  Support for the onboard RTC unit, including alarm function.
+
+  This has recently been upgraded to use the new RTC core,
+  and the module has been renamed to rtc-s3c to fit in with
+  the new rtc naming scheme.
+
+
+Watchdog
+--------
+
+  The onchip watchdog is available via the standard watchdog
+  interface.
+
+
+NAND
+----
+
+  The current kernels now have support for the s3c2410 NAND
+  controller. If there are any problems the latest linux-mtd
+  code can be found from http://www.linux-mtd.infradead.org/
+
+  For more information see Documentation/arm/samsung-s3c24xx/nand.rst
+
+
+SD/MMC
+------
+
+  The SD/MMC hardware pre S3C2443 is supported in the current
+  kernel, the driver is drivers/mmc/host/s3cmci.c and supports
+  1 and 4 bit SD or MMC cards.
+
+  The SDIO behaviour of this driver has not been fully tested. There is no
+  current support for hardware SDIO interrupts.
+
+
+Serial
+------
+
+  The s3c2410 serial driver provides support for the internal
+  serial ports. These devices appear as /dev/ttySAC0 through 3.
+
+  To create device nodes for these, use the following commands
+
+    mknod ttySAC0 c 204 64
+    mknod ttySAC1 c 204 65
+    mknod ttySAC2 c 204 66
+
+
+GPIO
+----
+
+  The core contains support for manipulating the GPIO, see the
+  documentation in GPIO.txt in the same directory as this file.
+
+  Newer kernels carry GPIOLIB, and support is being moved towards
+  this with some of the older support in line to be removed.
+
+  As of v2.6.34, the move towards using gpiolib support is almost
+  complete, and very little of the old calls are left.
+
+  See Documentation/arm/samsung-s3c24xx/gpio.rst for the S3C24XX specific
+  support and Documentation/arm/samsung/gpio.rst for the core Samsung
+  implementation.
+
+
+Clock Management
+----------------
+
+  The core provides the interface defined in the header file
+  include/asm-arm/hardware/clock.h, to allow control over the
+  various clock units
+
+
+Suspend to RAM
+--------------
+
+  For boards that provide support for suspend to RAM, the
+  system can be placed into low power suspend.
+
+  See Suspend.txt for more information.
+
+
+SPI
+---
+
+  SPI drivers are available for both the in-built hardware
+  (although there is no DMA support yet) and a generic
+  GPIO based solution.
+
+
+LEDs
+----
+
+  There is support for GPIO based LEDs via a platform driver
+  in the LED subsystem.
+
+
+Platform Data
+-------------
+
+  Whenever a device has platform specific data that is specified
+  on a per-machine basis, care should be taken to ensure the
+  following:
+
+    1) that default data is not left in the device to confuse the
+       driver if a machine does not set it at startup
+
+    2) the data should (if possible) be marked as __initdata,
+       to ensure that the data is thrown away if the machine is
+       not the one currently in use.
+
+       The best way of doing this is to make a function that
+       kmalloc()s an area of memory, and copies the __initdata
+       and then sets the relevant device's platform data. Making
+       the function `__init` takes care of ensuring it is discarded
+       with the rest of the initialisation code::
+
+         static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
+         {
+             struct s3c2410_xxx_mach_info *npd;
+
+	   npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
+	   if (npd) {
+	      memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
+	      s3c_device_xxx.dev.platform_data = npd;
+	   } else {
+                printk(KERN_ERR "no memory for xxx platform data\n");
+	   }
+	}
+
+	Note, since the code is marked as __init, it should not be
+	exported outside arch/arm/mach-s3c/, or exported to
+	modules via EXPORT_SYMBOL() and related functions.
+
+
+Port Contributors
+-----------------
+
+  Ben Dooks (BJD)
+  Vincent Sanders
+  Herbert Potzl
+  Arnaud Patard (RTP)
+  Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
+  Shannon Holland
+  Guillaume Gourat (NexVision)
+  Christer Weinigel (wingel) (Acer N30)
+  Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2004-2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2412.rst b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
new file mode 100644
index 000000000..68b985fc6
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
@@ -0,0 +1,121 @@
+==========================
+S3C2412 ARM Linux Overview
+==========================
+
+Introduction
+------------
+
+  The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs
+  from Samsung. This part has an ARM926-EJS core, capable of running up
+  to 266MHz (see data-sheet for more information)
+
+
+Clock
+-----
+
+  The core clock code provides a set of clocks to the drivers, and allows
+  for source selection and a number of other features.
+
+
+Power
+-----
+
+  No support for suspend/resume to RAM in the current system.
+
+
+DMA
+---
+
+  No current support for DMA.
+
+
+GPIO
+----
+
+  There is support for setting the GPIO to input/output/special function
+  and reading or writing to them.
+
+
+UART
+----
+
+  The UART hardware is similar to the S3C2440, and is supported by the
+  s3c2410 driver in the drivers/serial directory.
+
+
+NAND
+----
+
+  The NAND hardware is similar to the S3C2440, and is supported by the
+  s3c2410 driver in the drivers/mtd/nand/raw directory.
+
+
+USB Host
+--------
+
+  The USB hardware is similar to the S3C2410, with extended clock source
+  control. The OHCI portion is supported by the ohci-s3c2410 driver, and
+  the clock control selection is supported by the core clock code.
+
+
+USB Device
+----------
+
+  No current support in the kernel
+
+
+IRQs
+----
+
+  All the standard, and external interrupt sources are supported. The
+  extra sub-sources are not yet supported.
+
+
+RTC
+---
+
+  The RTC hardware is similar to the S3C2410, and is supported by the
+  s3c2410-rtc driver.
+
+
+Watchdog
+--------
+
+  The watchdog hardware is the same as the S3C2410, and is supported by
+  the s3c2410_wdt driver.
+
+
+MMC/SD/SDIO
+-----------
+
+  No current support for the MMC/SD/SDIO block.
+
+IIC
+---
+
+  The IIC hardware is the same as the S3C2410, and is supported by the
+  i2c-s3c24xx driver.
+
+
+IIS
+---
+
+  No current support for the IIS interface.
+
+
+SPI
+---
+
+  No current support for the SPI interfaces.
+
+
+ATA
+---
+
+  No current support for the on-board ATA block.
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2413.rst b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
new file mode 100644
index 000000000..1f51e207f
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
@@ -0,0 +1,22 @@
+==========================
+S3C2413 ARM Linux Overview
+==========================
+
+Introduction
+------------
+
+  The S3C2413 is an extended version of the S3C2412, with an camera
+  interface and mobile DDR memory support. See the S3C2412 support
+  documentation for more information.
+
+
+Camera Interface
+----------------
+
+  This block is currently not supported.
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/smdk2440.rst b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
new file mode 100644
index 000000000..524fd0b4a
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
@@ -0,0 +1,57 @@
+=========================
+Samsung/Meritech SMDK2440
+=========================
+
+Introduction
+------------
+
+  The SMDK2440 is a two part evaluation board for the Samsung S3C2440
+  processor. It includes support for LCD, SmartMedia, Audio, SD and
+  10MBit Ethernet, and expansion headers for various signals, including
+  the camera and unused GPIO.
+
+
+Configuration
+-------------
+
+  To set the default configuration, use `make smdk2440_defconfig` which
+  will configure the common features of this board, or use
+  `make s3c2410_config` to include support for all s3c2410/s3c2440 machines
+
+
+Support
+-------
+
+  Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which
+  includes linux based USB download tools.
+
+  Some of the h1940 patches that can be found from the H1940 project
+  site at http://www.handhelds.org/projects/h1940.html can also be
+  applied to this board.
+
+
+Peripherals
+-----------
+
+  There is no current support for any of the extra peripherals on the
+  base-board itself.
+
+
+MTD
+---
+
+  The NAND flash should be supported by the in kernel MTD NAND support,
+  NOR flash will be added later.
+
+
+Maintainers
+-----------
+
+  This board is being maintained by Ben Dooks, for more info, see
+  http://www.fluff.org/ben/smdk2440/
+
+  Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440,
+  and to Simtec Electronics for allowing me time to work on this.
+
+
+(c) 2004 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/suspend.rst b/Documentation/arm/samsung-s3c24xx/suspend.rst
new file mode 100644
index 000000000..b4f3ae9fe
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/suspend.rst
@@ -0,0 +1,137 @@
+=======================
+S3C24XX Suspend Support
+=======================
+
+
+Introduction
+------------
+
+  The S3C24XX supports a low-power suspend mode, where the SDRAM is kept
+  in Self-Refresh mode, and all but the essential peripheral blocks are
+  powered down. For more information on how this works, please look
+  at the relevant CPU datasheet from Samsung.
+
+
+Requirements
+------------
+
+  1) A bootloader that can support the necessary resume operation
+
+  2) Support for at least 1 source for resume
+
+  3) CONFIG_PM enabled in the kernel
+
+  4) Any peripherals that are going to be powered down at the same
+     time require suspend/resume support.
+
+
+Resuming
+--------
+
+  The S3C2410 user manual defines the process of sending the CPU to
+  sleep and how it resumes. The default behaviour of the Linux code
+  is to set the GSTATUS3 register to the physical address of the
+  code to resume Linux operation.
+
+  GSTATUS4 is currently left alone by the sleep code, and is free to
+  use for any other purposes (for example, the EB2410ITX uses this to
+  save memory configuration in).
+
+
+Machine Support
+---------------
+
+  The machine specific functions must call the s3c_pm_init() function
+  to say that its bootloader is capable of resuming. This can be as
+  simple as adding the following to the machine's definition:
+
+  INITMACHINE(s3c_pm_init)
+
+  A board can do its own setup before calling s3c_pm_init, if it
+  needs to setup anything else for power management support.
+
+  There is currently no support for over-riding the default method of
+  saving the resume address, if your board requires it, then contact
+  the maintainer and discuss what is required.
+
+  Note, the original method of adding an late_initcall() is wrong,
+  and will end up initialising all compiled machines' pm init!
+
+  The following is an example of code used for testing wakeup from
+  an falling edge on IRQ_EINT0::
+
+
+    static irqreturn_t button_irq(int irq, void *pw)
+    {
+	return IRQ_HANDLED;
+    }
+
+    statuc void __init machine_init(void)
+    {
+	...
+
+	request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING,
+		   "button-irq-eint0", NULL);
+
+	enable_irq_wake(IRQ_EINT0);
+
+	s3c_pm_init();
+    }
+
+
+Debugging
+---------
+
+  There are several important things to remember when using PM suspend:
+
+  1) The uart drivers will disable the clocks to the UART blocks when
+     suspending, which means that use of printascii() or similar direct
+     access to the UARTs will cause the debug to stop.
+
+  2) While the pm code itself will attempt to re-enable the UART clocks,
+     care should be taken that any external clock sources that the UARTs
+     rely on are still enabled at that point.
+
+  3) If any debugging is placed in the resume path, then it must have the
+     relevant clocks and peripherals setup before use (ie, bootloader).
+
+     For example, if you transmit a character from the UART, the baud
+     rate and uart controls must be setup beforehand.
+
+
+Configuration
+-------------
+
+  The S3C2410 specific configuration in `System Type` defines various
+  aspects of how the S3C2410 suspend and resume support is configured
+
+  `S3C2410 PM Suspend debug`
+
+    This option prints messages to the serial console before and after
+    the actual suspend, giving detailed information on what is
+    happening
+
+
+  `S3C2410 PM Suspend Memory CRC`
+
+    Allows the entire memory to be checksummed before and after the
+    suspend to see if there has been any corruption of the contents.
+
+    Note, the time to calculate the CRC is dependent on the CPU speed
+    and the size of memory. For an 64Mbyte RAM area on an 200MHz
+    S3C2410, this can take approximately 4 seconds to complete.
+
+    This support requires the CRC32 function to be enabled.
+
+
+  `S3C2410 PM Suspend CRC Chunksize (KiB)`
+
+    Defines the size of memory each CRC chunk covers. A smaller value
+    will mean that the CRC data block will take more memory, but will
+    identify any faults with better precision
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2004 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst
new file mode 100644
index 000000000..7aaffac89
--- /dev/null
+++ b/Documentation/arm/samsung-s3c24xx/usb-host.rst
@@ -0,0 +1,91 @@
+========================
+S3C24XX USB Host support
+========================
+
+
+
+Introduction
+------------
+
+  This document details the S3C2410/S3C2440 in-built OHCI USB host support.
+
+Configuration
+-------------
+
+  Enable at least the following kernel options:
+
+  menuconfig::
+
+   Device Drivers  --->
+     USB support  --->
+       <*> Support for Host-side USB
+       <*>   OHCI HCD support
+
+
+  .config:
+
+    - CONFIG_USB
+    - CONFIG_USB_OHCI_HCD
+
+
+  Once these options are configured, the standard set of USB device
+  drivers can be configured and used.
+
+
+Board Support
+-------------
+
+  The driver attaches to a platform device, which will need to be
+  added by the board specific support file in arch/arm/mach-s3c,
+  such as mach-bast.c or mach-smdk2410.c
+
+  The platform device's platform_data field is only needed if the
+  board implements extra power control or over-current monitoring.
+
+  The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
+  register, so if both ports are to be used for the host, then it is
+  the board support file's responsibility to ensure that the second
+  port is configured to be connected to the OHCI core.
+
+
+Platform Data
+-------------
+
+  See include/linux/platform_data/usb-ohci-s3c2410.h for the
+  descriptions of the platform device data. An implementation
+  can be found in arch/arm/mach-s3c/simtec-usb.c .
+
+  The `struct s3c2410_hcd_info` contains a pair of functions
+  that get called to enable over-current detection, and to
+  control the port power status.
+
+  The ports are numbered 0 and 1.
+
+  power_control:
+    Called to enable or disable the power on the port.
+
+  enable_oc:
+    Called to enable or disable the over-current monitoring.
+    This should claim or release the resources being used to
+    check the power condition on the port, such as an IRQ.
+
+  report_oc:
+    The OHCI driver fills this field in for the over-current code
+    to call when there is a change to the over-current state on
+    an port. The ports argument is a bitmask of 1 bit per port,
+    with bit X being 1 for an over-current on port X.
+
+    The function s3c2410_usb_report_oc() has been provided to
+    ensure this is called correctly.
+
+  port[x]:
+    This is struct describes each port, 0 or 1. The platform driver
+    should set the flags field of each port to S3C_HCDFLG_USED if
+    the port is enabled.
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2005 Simtec Electronics