Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 211 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
new file mode 100644
index 000000000..33b5f79e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT65xx Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-pinctrl
+      - mediatek,mt2712-pinctrl
+      - mediatek,mt6397-pinctrl
+      - mediatek,mt7623-pinctrl
+      - mediatek,mt8127-pinctrl
+      - mediatek,mt8135-pinctrl
+      - mediatek,mt8167-pinctrl
+      - mediatek,mt8173-pinctrl
+      - mediatek,mt8516-pinctrl
+
+  reg:
+    maxItems: 1
+
+  pins-are-numbered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Specify the subnodes are using numbered pinmux to specify pins.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  mediatek,pctl-regmap:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    minItems: 1
+    maxItems: 2
+    description: |
+      Should be phandles of the syscfg node.
+
+  interrupt-controller: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - pins-are-numbered
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up:
+            description: |
+              Besides generic pinconfig options, it can be used as the pull up
+              settings for 2 pull resistors, R0 and R1. User can configure those
+              special pins. Some macros have been defined for this usage, such
+              as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
+              valid arguments.
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            description: |
+              Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
+              etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8135-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        syscfg_pctl_a: syscfg-pctl-a@10005000 {
+          compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+          reg = <0 0x10005000 0 0x1000>;
+        };
+
+        syscfg_pctl_b: syscfg-pctl-b@1020c020 {
+          compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+          reg = <0 0x1020C020 0 0x1000>;
+        };
+
+        pinctrl@1c20800 {
+          compatible = "mediatek,mt8135-pinctrl";
+          reg = <0 0x1000B000 0 0x1000>;
+          mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
+          pins-are-numbered;
+          gpio-controller;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+
+          i2c0_pins_a: i2c0-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
+                <MT8135_PIN_101_SCL0__FUNC_SCL0>;
+              bias-disable;
+            };
+          };
+
+          i2c1_pins_a: i2c1-0 {
+            pins {
+              pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
+                <MT8135_PIN_196_SCL1__FUNC_SCL1>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+          };
+
+          i2c2_pins_a: i2c2-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
+              bias-pull-down;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
+              bias-pull-up;
+            };
+          };
+
+          i2c3_pins_a: i2c3-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
+                <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
+                <MT8135_PIN_36_SDA3__FUNC_SDA3>;
+              output-low;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins3 {
+              pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
+                <MT8135_PIN_60_JTDI__FUNC_JTDI>;
+              drive-strength = <32>;
+            };
+          };
+        };
+    };