Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 297 insertions, 0 deletions

diff --git a/Documentation/fb/viafb.rst b/Documentation/fb/viafb.rst
new file mode 100644
index 000000000..8eb7a3bb0
--- /dev/null
+++ b/Documentation/fb/viafb.rst
@@ -0,0 +1,297 @@
+=======================================================
+VIA Integration Graphic Chip Console Framebuffer Driver
+=======================================================
+
+Platform
+--------
+    The console framebuffer driver is for graphics chips of
+    VIA UniChrome Family
+    (CLE266, PM800 / CN400 / CN300,
+    P4M800CE / P4M800Pro / CN700 / VN800,
+    CX700 / VX700, K8M890, P4M890,
+    CN896 / P4M900, VX800, VX855)
+
+Driver features
+---------------
+    Device: CRT, LCD, DVI
+
+    Support viafb_mode::
+
+	CRT:
+	    640x480(60, 75, 85, 100, 120 Hz), 720x480(60 Hz),
+	    720x576(60 Hz), 800x600(60, 75, 85, 100, 120 Hz),
+	    848x480(60 Hz), 856x480(60 Hz), 1024x512(60 Hz),
+	    1024x768(60, 75, 85, 100 Hz), 1152x864(75 Hz),
+	    1280x768(60 Hz), 1280x960(60 Hz), 1280x1024(60, 75, 85 Hz),
+	    1440x1050(60 Hz), 1600x1200(60, 75 Hz), 1280x720(60 Hz),
+	    1920x1080(60 Hz), 1400x1050(60 Hz), 800x480(60 Hz)
+
+    color depth: 8 bpp, 16 bpp, 32 bpp supports.
+
+    Support 2D hardware accelerator.
+
+Using the viafb module
+----------------------
+    Start viafb with default settings::
+
+	#modprobe viafb
+
+    Start viafb with user options::
+
+	#modprobe viafb viafb_mode=800x600 viafb_bpp=16 viafb_refresh=60
+		  viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1
+		  viafb_mode1=1024x768 viafb_bpp=16 viafb_refresh1=60
+		  viafb_SAMM_ON=1
+
+    viafb_mode:
+	- 640x480 (default)
+	- 720x480
+	- 800x600
+	- 1024x768
+
+    viafb_bpp:
+	- 8, 16, 32 (default:32)
+
+    viafb_refresh:
+	- 60, 75, 85, 100, 120 (default:60)
+
+    viafb_lcd_dsp_method:
+	- 0 : expansion (default)
+	- 1 : centering
+
+    viafb_lcd_mode:
+	0 : LCD panel with LSB data format input (default)
+	1 : LCD panel with MSB data format input
+
+    viafb_lcd_panel_id:
+	- 0 : Resolution: 640x480, Channel: single, Dithering: Enable
+	- 1 : Resolution: 800x600, Channel: single, Dithering: Enable
+	- 2 : Resolution: 1024x768, Channel: single, Dithering: Enable (default)
+	- 3 : Resolution: 1280x768, Channel: single, Dithering: Enable
+	- 4 : Resolution: 1280x1024, Channel: dual, Dithering: Enable
+	- 5 : Resolution: 1400x1050, Channel: dual, Dithering: Enable
+	- 6 : Resolution: 1600x1200, Channel: dual, Dithering: Enable
+
+	- 8 : Resolution: 800x480, Channel: single, Dithering: Enable
+	- 9 : Resolution: 1024x768, Channel: dual, Dithering: Enable
+	- 10: Resolution: 1024x768, Channel: single, Dithering: Disable
+	- 11: Resolution: 1024x768, Channel: dual, Dithering: Disable
+	- 12: Resolution: 1280x768, Channel: single, Dithering: Disable
+	- 13: Resolution: 1280x1024, Channel: dual, Dithering: Disable
+	- 14: Resolution: 1400x1050, Channel: dual, Dithering: Disable
+	- 15: Resolution: 1600x1200, Channel: dual, Dithering: Disable
+	- 16: Resolution: 1366x768, Channel: single, Dithering: Disable
+	- 17: Resolution: 1024x600, Channel: single, Dithering: Enable
+	- 18: Resolution: 1280x768, Channel: dual, Dithering: Enable
+	- 19: Resolution: 1280x800, Channel: single, Dithering: Enable
+
+    viafb_accel:
+	- 0 : No 2D Hardware Acceleration
+	- 1 : 2D Hardware Acceleration (default)
+
+    viafb_SAMM_ON:
+	- 0 : viafb_SAMM_ON disable (default)
+	- 1 : viafb_SAMM_ON enable
+
+    viafb_mode1: (secondary display device)
+	- 640x480 (default)
+	- 720x480
+	- 800x600
+	- 1024x768
+
+    viafb_bpp1: (secondary display device)
+	- 8, 16, 32 (default:32)
+
+    viafb_refresh1: (secondary display device)
+	- 60, 75, 85, 100, 120 (default:60)
+
+    viafb_active_dev:
+	This option is used to specify active devices.(CRT, DVI, CRT+LCD...)
+	DVI stands for DVI or HDMI, E.g., If you want to enable HDMI,
+	set viafb_active_dev=DVI. In SAMM case, the previous of
+	viafb_active_dev is primary device, and the following is
+	secondary device.
+
+	For example:
+
+	To enable one device, such as DVI only, we can use::
+
+	    modprobe viafb viafb_active_dev=DVI
+
+	To enable two devices, such as CRT+DVI::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI;
+
+	For DuoView case, we can use::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI
+
+	OR::
+
+	    modprobe viafb viafb_active_dev=DVI+CRT...
+
+	For SAMM case:
+
+	If CRT is primary and DVI is secondary, we should use::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI viafb_SAMM_ON=1...
+
+	If DVI is primary and CRT is secondary, we should use::
+
+	    modprobe viafb viafb_active_dev=DVI+CRT viafb_SAMM_ON=1...
+
+    viafb_display_hardware_layout:
+	This option is used to specify display hardware layout for CX700 chip.
+
+	- 1 : LCD only
+	- 2 : DVI only
+	- 3 : LCD+DVI (default)
+	- 4 : LCD1+LCD2 (internal + internal)
+	- 16: LCD1+ExternalLCD2 (internal + external)
+
+    viafb_second_size:
+	This option is used to set second device memory size(MB) in SAMM case.
+	The minimal size is 16.
+
+    viafb_platform_epia_dvi:
+	This option is used to enable DVI on EPIA - M
+
+	- 0 : No DVI on EPIA - M (default)
+	- 1 : DVI on EPIA - M
+
+    viafb_bus_width:
+	When using 24 - Bit Bus Width Digital Interface,
+	this option should be set.
+
+	- 12: 12-Bit LVDS or 12-Bit TMDS (default)
+	- 24: 24-Bit LVDS or 24-Bit TMDS
+
+    viafb_device_lcd_dualedge:
+	When using Dual Edge Panel, this option should be set.
+
+	- 0 : No Dual Edge Panel (default)
+	- 1 : Dual Edge Panel
+
+    viafb_lcd_port:
+	This option is used to specify LCD output port,
+	available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW".
+
+	for external LCD + external DVI on CX700(External LCD is on DVP0),
+	we should use::
+
+	    modprobe viafb viafb_lcd_port=DVP0...
+
+Notes:
+    1. CRT may not display properly for DuoView CRT & DVI display at
+       the "640x480" PAL mode with DVI overscan enabled.
+    2. SAMM stands for single adapter multi monitors. It is different from
+       multi-head since SAMM support multi monitor at driver layers, thus fbcon
+       layer doesn't even know about it; SAMM's second screen doesn't have a
+       device node file, thus a user mode application can't access it directly.
+       When SAMM is enabled, viafb_mode and viafb_mode1, viafb_bpp and
+       viafb_bpp1, viafb_refresh and viafb_refresh1 can be different.
+    3. When console is depending on viafbinfo1, dynamically change resolution
+       and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE
+       instead of calling common ioctl function FBIOPUT_VSCREENINFO since
+       viafb doesn't support multi-head well, or it will cause screen crush.
+
+
+Configure viafb with "fbset" tool
+---------------------------------
+
+    "fbset" is an inbox utility of Linux.
+
+    1. Inquire current viafb information, type::
+
+	   # fbset -i
+
+    2. Set various resolutions and viafb_refresh rates::
+
+	   # fbset <resolution-vertical_sync>
+
+       example::
+
+	   # fbset "1024x768-75"
+
+       or::
+
+	   # fbset -g 1024 768 1024 768 32
+
+       Check the file "/etc/fb.modes" to find display modes available.
+
+    3. Set the color depth::
+
+	   # fbset -depth <value>
+
+       example::
+
+	   # fbset -depth 16
+
+
+Configure viafb via /proc
+-------------------------
+    The following files exist in /proc/viafb
+
+    supported_output_devices
+	This read-only file contains a full ',' separated list containing all
+	output devices that could be available on your platform. It is likely
+	that not all of those have a connector on your hardware but it should
+	provide a good starting point to figure out which of those names match
+	a real connector.
+
+	Example::
+
+		# cat /proc/viafb/supported_output_devices
+
+    iga1/output_devices, iga2/output_devices
+	These two files are readable and writable. iga1 and iga2 are the two
+	independent units that produce the screen image. Those images can be
+	forwarded to one or more output devices. Reading those files is a way
+	to query which output devices are currently used by an iga.
+
+	Example::
+
+		# cat /proc/viafb/iga1/output_devices
+
+	If there are no output devices printed the output of this iga is lost.
+	This can happen for example if only one (the other) iga is used.
+	Writing to these files allows adjusting the output devices during
+	runtime. One can add new devices, remove existing ones or switch
+	between igas. Essentially you can write a ',' separated list of device
+	names (or a single one) in the same format as the output to those
+	files. You can add a '+' or '-' as a prefix allowing simple addition
+	and removal of devices. So a prefix '+' adds the devices from your list
+	to the already existing ones, '-' removes the listed devices from the
+	existing ones and if no prefix is given it replaces all existing ones
+	with the listed ones. If you remove devices they are expected to turn
+	off. If you add devices that are already part of the other iga they are
+	removed there and added to the new one.
+
+	Examples:
+
+	Add CRT as output device to iga1::
+
+		# echo +CRT > /proc/viafb/iga1/output_devices
+
+	Remove (turn off) DVP1 and LVDS1 as output devices of iga2::
+
+		# echo -DVP1,LVDS1 > /proc/viafb/iga2/output_devices
+
+	Replace all iga1 output devices by CRT::
+
+		# echo CRT > /proc/viafb/iga1/output_devices
+
+
+Bootup with viafb
+-----------------
+
+Add the following line to your grub.conf::
+
+    append = "video=viafb:viafb_mode=1024x768,viafb_bpp=32,viafb_refresh=85"
+
+
+VIA Framebuffer modes
+=====================
+
+.. include:: viafb.modes
+   :literal: