Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1476 insertions, 0 deletions

diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst
new file mode 100644
index 000000000..b5e8b8af8
--- /dev/null
+++ b/Documentation/filesystems/vfs.rst
@@ -0,0 +1,1476 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Overview of the Linux Virtual File System
+=========================================
+
+Original author: Richard Gooch <rgooch@atnf.csiro.au>
+
+- Copyright (C) 1999 Richard Gooch
+- Copyright (C) 2005 Pekka Enberg
+
+
+Introduction
+============
+
+The Virtual File System (also known as the Virtual Filesystem Switch) is
+the software layer in the kernel that provides the filesystem interface
+to userspace programs.  It also provides an abstraction within the
+kernel which allows different filesystem implementations to coexist.
+
+VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so on
+are called from a process context.  Filesystem locking is described in
+the document Documentation/filesystems/locking.rst.
+
+
+Directory Entry Cache (dcache)
+------------------------------
+
+The VFS implements the open(2), stat(2), chmod(2), and similar system
+calls.  The pathname argument that is passed to them is used by the VFS
+to search through the directory entry cache (also known as the dentry
+cache or dcache).  This provides a very fast look-up mechanism to
+translate a pathname (filename) into a specific dentry.  Dentries live
+in RAM and are never saved to disc: they exist only for performance.
+
+The dentry cache is meant to be a view into your entire filespace.  As
+most computers cannot fit all dentries in the RAM at the same time, some
+bits of the cache are missing.  In order to resolve your pathname into a
+dentry, the VFS may have to resort to creating dentries along the way,
+and then loading the inode.  This is done by looking up the inode.
+
+
+The Inode Object
+----------------
+
+An individual dentry usually has a pointer to an inode.  Inodes are
+filesystem objects such as regular files, directories, FIFOs and other
+beasts.  They live either on the disc (for block device filesystems) or
+in the memory (for pseudo filesystems).  Inodes that live on the disc
+are copied into the memory when required and changes to the inode are
+written back to disc.  A single inode can be pointed to by multiple
+dentries (hard links, for example, do this).
+
+To look up an inode requires that the VFS calls the lookup() method of
+the parent directory inode.  This method is installed by the specific
+filesystem implementation that the inode lives in.  Once the VFS has the
+required dentry (and hence the inode), we can do all those boring things
+like open(2) the file, or stat(2) it to peek at the inode data.  The
+stat(2) operation is fairly simple: once the VFS has the dentry, it
+peeks at the inode data and passes some of it back to userspace.
+
+
+The File Object
+---------------
+
+Opening a file requires another operation: allocation of a file
+structure (this is the kernel-side implementation of file descriptors).
+The freshly allocated file structure is initialized with a pointer to
+the dentry and a set of file operation member functions.  These are
+taken from the inode data.  The open() file method is then called so the
+specific filesystem implementation can do its work.  You can see that
+this is another switch performed by the VFS.  The file structure is
+placed into the file descriptor table for the process.
+
+Reading, writing and closing files (and other assorted VFS operations)
+is done by using the userspace file descriptor to grab the appropriate
+file structure, and then calling the required file structure method to
+do whatever is required.  For as long as the file is open, it keeps the
+dentry in use, which in turn means that the VFS inode is still in use.
+
+
+Registering and Mounting a Filesystem
+=====================================
+
+To register and unregister a filesystem, use the following API
+functions:
+
+.. code-block:: c
+
+	#include <linux/fs.h>
+
+	extern int register_filesystem(struct file_system_type *);
+	extern int unregister_filesystem(struct file_system_type *);
+
+The passed struct file_system_type describes your filesystem.  When a
+request is made to mount a filesystem onto a directory in your
+namespace, the VFS will call the appropriate mount() method for the
+specific filesystem.  New vfsmount referring to the tree returned by
+->mount() will be attached to the mountpoint, so that when pathname
+resolution reaches the mountpoint it will jump into the root of that
+vfsmount.
+
+You can see all filesystems that are registered to the kernel in the
+file /proc/filesystems.
+
+
+struct file_system_type
+-----------------------
+
+This describes the filesystem.  As of kernel 2.6.39, the following
+members are defined:
+
+.. code-block:: c
+
+	struct file_system_type {
+		const char *name;
+		int fs_flags;
+		struct dentry *(*mount) (struct file_system_type *, int,
+					 const char *, void *);
+		void (*kill_sb) (struct super_block *);
+		struct module *owner;
+		struct file_system_type * next;
+		struct list_head fs_supers;
+		struct lock_class_key s_lock_key;
+		struct lock_class_key s_umount_key;
+	};
+
+``name``
+	the name of the filesystem type, such as "ext2", "iso9660",
+	"msdos" and so on
+
+``fs_flags``
+	various flags (i.e. FS_REQUIRES_DEV, FS_NO_DCACHE, etc.)
+
+``mount``
+	the method to call when a new instance of this filesystem should
+	be mounted
+
+``kill_sb``
+	the method to call when an instance of this filesystem should be
+	shut down
+
+
+``owner``
+	for internal VFS use: you should initialize this to THIS_MODULE
+	in most cases.
+
+``next``
+	for internal VFS use: you should initialize this to NULL
+
+  s_lock_key, s_umount_key: lockdep-specific
+
+The mount() method has the following arguments:
+
+``struct file_system_type *fs_type``
+	describes the filesystem, partly initialized by the specific
+	filesystem code
+
+``int flags``
+	mount flags
+
+``const char *dev_name``
+	the device name we are mounting.
+
+``void *data``
+	arbitrary mount options, usually comes as an ASCII string (see
+	"Mount Options" section)
+
+The mount() method must return the root dentry of the tree requested by
+caller.  An active reference to its superblock must be grabbed and the
+superblock must be locked.  On failure it should return ERR_PTR(error).
+
+The arguments match those of mount(2) and their interpretation depends
+on filesystem type.  E.g. for block filesystems, dev_name is interpreted
+as block device name, that device is opened and if it contains a
+suitable filesystem image the method creates and initializes struct
+super_block accordingly, returning its root dentry to caller.
+
+->mount() may choose to return a subtree of existing filesystem - it
+doesn't have to create a new one.  The main result from the caller's
+point of view is a reference to dentry at the root of (sub)tree to be
+attached; creation of new superblock is a common side effect.
+
+The most interesting member of the superblock structure that the mount()
+method fills in is the "s_op" field.  This is a pointer to a "struct
+super_operations" which describes the next level of the filesystem
+implementation.
+
+Usually, a filesystem uses one of the generic mount() implementations
+and provides a fill_super() callback instead.  The generic variants are:
+
+``mount_bdev``
+	mount a filesystem residing on a block device
+
+``mount_nodev``
+	mount a filesystem that is not backed by a device
+
+``mount_single``
+	mount a filesystem which shares the instance between all mounts
+
+A fill_super() callback implementation has the following arguments:
+
+``struct super_block *sb``
+	the superblock structure.  The callback must initialize this
+	properly.
+
+``void *data``
+	arbitrary mount options, usually comes as an ASCII string (see
+	"Mount Options" section)
+
+``int silent``
+	whether or not to be silent on error
+
+
+The Superblock Object
+=====================
+
+A superblock object represents a mounted filesystem.
+
+
+struct super_operations
+-----------------------
+
+This describes how the VFS can manipulate the superblock of your
+filesystem.  As of kernel 2.6.22, the following members are defined:
+
+.. code-block:: c
+
+	struct super_operations {
+		struct inode *(*alloc_inode)(struct super_block *sb);
+		void (*destroy_inode)(struct inode *);
+
+		void (*dirty_inode) (struct inode *, int flags);
+		int (*write_inode) (struct inode *, int);
+		void (*drop_inode) (struct inode *);
+		void (*delete_inode) (struct inode *);
+		void (*put_super) (struct super_block *);
+		int (*sync_fs)(struct super_block *sb, int wait);
+		int (*freeze_fs) (struct super_block *);
+		int (*unfreeze_fs) (struct super_block *);
+		int (*statfs) (struct dentry *, struct kstatfs *);
+		int (*remount_fs) (struct super_block *, int *, char *);
+		void (*clear_inode) (struct inode *);
+		void (*umount_begin) (struct super_block *);
+
+		int (*show_options)(struct seq_file *, struct dentry *);
+
+		ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
+		ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
+		int (*nr_cached_objects)(struct super_block *);
+		void (*free_cached_objects)(struct super_block *, int);
+	};
+
+All methods are called without any locks being held, unless otherwise
+noted.  This means that most methods can block safely.  All methods are
+only called from a process context (i.e. not from an interrupt handler
+or bottom half).
+
+``alloc_inode``
+	this method is called by alloc_inode() to allocate memory for
+	struct inode and initialize it.  If this function is not
+	defined, a simple 'struct inode' is allocated.  Normally
+	alloc_inode will be used to allocate a larger structure which
+	contains a 'struct inode' embedded within it.
+
+``destroy_inode``
+	this method is called by destroy_inode() to release resources
+	allocated for struct inode.  It is only required if
+	->alloc_inode was defined and simply undoes anything done by
+	->alloc_inode.
+
+``dirty_inode``
+	this method is called by the VFS when an inode is marked dirty.
+	This is specifically for the inode itself being marked dirty,
+	not its data.  If the update needs to be persisted by fdatasync(),
+	then I_DIRTY_DATASYNC will be set in the flags argument.
+	I_DIRTY_TIME will be set in the flags in case lazytime is enabled
+	and struct inode has times updated since the last ->dirty_inode
+	call.
+
+``write_inode``
+	this method is called when the VFS needs to write an inode to
+	disc.  The second parameter indicates whether the write should
+	be synchronous or not, not all filesystems check this flag.
+
+``drop_inode``
+	called when the last access to the inode is dropped, with the
+	inode->i_lock spinlock held.
+
+	This method should be either NULL (normal UNIX filesystem
+	semantics) or "generic_delete_inode" (for filesystems that do
+	not want to cache inodes - causing "delete_inode" to always be
+	called regardless of the value of i_nlink)
+
+	The "generic_delete_inode()" behavior is equivalent to the old
+	practice of using "force_delete" in the put_inode() case, but
+	does not have the races that the "force_delete()" approach had.
+
+``delete_inode``
+	called when the VFS wants to delete an inode
+
+``put_super``
+	called when the VFS wishes to free the superblock
+	(i.e. unmount).  This is called with the superblock lock held
+
+``sync_fs``
+	called when VFS is writing out all dirty data associated with a
+	superblock.  The second parameter indicates whether the method
+	should wait until the write out has been completed.  Optional.
+
+``freeze_fs``
+	called when VFS is locking a filesystem and forcing it into a
+	consistent state.  This method is currently used by the Logical
+	Volume Manager (LVM).
+
+``unfreeze_fs``
+	called when VFS is unlocking a filesystem and making it writable
+	again.
+
+``statfs``
+	called when the VFS needs to get filesystem statistics.
+
+``remount_fs``
+	called when the filesystem is remounted.  This is called with
+	the kernel lock held
+
+``clear_inode``
+	called then the VFS clears the inode.  Optional
+
+``umount_begin``
+	called when the VFS is unmounting a filesystem.
+
+``show_options``
+	called by the VFS to show mount options for /proc/<pid>/mounts.
+	(see "Mount Options" section)
+
+``quota_read``
+	called by the VFS to read from filesystem quota file.
+
+``quota_write``
+	called by the VFS to write to filesystem quota file.
+
+``nr_cached_objects``
+	called by the sb cache shrinking function for the filesystem to
+	return the number of freeable cached objects it contains.
+	Optional.
+
+``free_cache_objects``
+	called by the sb cache shrinking function for the filesystem to
+	scan the number of objects indicated to try to free them.
+	Optional, but any filesystem implementing this method needs to
+	also implement ->nr_cached_objects for it to be called
+	correctly.
+
+	We can't do anything with any errors that the filesystem might
+	encountered, hence the void return type.  This will never be
+	called if the VM is trying to reclaim under GFP_NOFS conditions,
+	hence this method does not need to handle that situation itself.
+
+	Implementations must include conditional reschedule calls inside
+	any scanning loop that is done.  This allows the VFS to
+	determine appropriate scan batch sizes without having to worry
+	about whether implementations will cause holdoff problems due to
+	large scan batch sizes.
+
+Whoever sets up the inode is responsible for filling in the "i_op"
+field.  This is a pointer to a "struct inode_operations" which describes
+the methods that can be performed on individual inodes.
+
+
+struct xattr_handlers
+---------------------
+
+On filesystems that support extended attributes (xattrs), the s_xattr
+superblock field points to a NULL-terminated array of xattr handlers.
+Extended attributes are name:value pairs.
+
+``name``
+	Indicates that the handler matches attributes with the specified
+	name (such as "system.posix_acl_access"); the prefix field must
+	be NULL.
+
+``prefix``
+	Indicates that the handler matches all attributes with the
+	specified name prefix (such as "user."); the name field must be
+	NULL.
+
+``list``
+	Determine if attributes matching this xattr handler should be
+	listed for a particular dentry.  Used by some listxattr
+	implementations like generic_listxattr.
+
+``get``
+	Called by the VFS to get the value of a particular extended
+	attribute.  This method is called by the getxattr(2) system
+	call.
+
+``set``
+	Called by the VFS to set the value of a particular extended
+	attribute.  When the new value is NULL, called to remove a
+	particular extended attribute.  This method is called by the
+	setxattr(2) and removexattr(2) system calls.
+
+When none of the xattr handlers of a filesystem match the specified
+attribute name or when a filesystem doesn't support extended attributes,
+the various ``*xattr(2)`` system calls return -EOPNOTSUPP.
+
+
+The Inode Object
+================
+
+An inode object represents an object within the filesystem.
+
+
+struct inode_operations
+-----------------------
+
+This describes how the VFS can manipulate an inode in your filesystem.
+As of kernel 2.6.22, the following members are defined:
+
+.. code-block:: c
+
+	struct inode_operations {
+		int (*create) (struct user_namespace *, struct inode *,struct dentry *, umode_t, bool);
+		struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int);
+		int (*link) (struct dentry *,struct inode *,struct dentry *);
+		int (*unlink) (struct inode *,struct dentry *);
+		int (*symlink) (struct user_namespace *, struct inode *,struct dentry *,const char *);
+		int (*mkdir) (struct user_namespace *, struct inode *,struct dentry *,umode_t);
+		int (*rmdir) (struct inode *,struct dentry *);
+		int (*mknod) (struct user_namespace *, struct inode *,struct dentry *,umode_t,dev_t);
+		int (*rename) (struct user_namespace *, struct inode *, struct dentry *,
+			       struct inode *, struct dentry *, unsigned int);
+		int (*readlink) (struct dentry *, char __user *,int);
+		const char *(*get_link) (struct dentry *, struct inode *,
+					 struct delayed_call *);
+		int (*permission) (struct user_namespace *, struct inode *, int);
+		struct posix_acl * (*get_acl)(struct inode *, int, bool);
+		int (*setattr) (struct user_namespace *, struct dentry *, struct iattr *);
+		int (*getattr) (struct user_namespace *, const struct path *, struct kstat *, u32, unsigned int);
+		ssize_t (*listxattr) (struct dentry *, char *, size_t);
+		void (*update_time)(struct inode *, struct timespec *, int);
+		int (*atomic_open)(struct inode *, struct dentry *, struct file *,
+				   unsigned open_flag, umode_t create_mode);
+		int (*tmpfile) (struct user_namespace *, struct inode *, struct file *, umode_t);
+	        int (*set_acl)(struct user_namespace *, struct inode *, struct posix_acl *, int);
+		int (*fileattr_set)(struct user_namespace *mnt_userns,
+				    struct dentry *dentry, struct fileattr *fa);
+		int (*fileattr_get)(struct dentry *dentry, struct fileattr *fa);
+	};
+
+Again, all methods are called without any locks being held, unless
+otherwise noted.
+
+``create``
+	called by the open(2) and creat(2) system calls.  Only required
+	if you want to support regular files.  The dentry you get should
+	not have an inode (i.e. it should be a negative dentry).  Here
+	you will probably call d_instantiate() with the dentry and the
+	newly created inode
+
+``lookup``
+	called when the VFS needs to look up an inode in a parent
+	directory.  The name to look for is found in the dentry.  This
+	method must call d_add() to insert the found inode into the
+	dentry.  The "i_count" field in the inode structure should be
+	incremented.  If the named inode does not exist a NULL inode
+	should be inserted into the dentry (this is called a negative
+	dentry).  Returning an error code from this routine must only be
+	done on a real error, otherwise creating inodes with system
+	calls like create(2), mknod(2), mkdir(2) and so on will fail.
+	If you wish to overload the dentry methods then you should
+	initialise the "d_dop" field in the dentry; this is a pointer to
+	a struct "dentry_operations".  This method is called with the
+	directory inode semaphore held
+
+``link``
+	called by the link(2) system call.  Only required if you want to
+	support hard links.  You will probably need to call
+	d_instantiate() just as you would in the create() method
+
+``unlink``
+	called by the unlink(2) system call.  Only required if you want
+	to support deleting inodes
+
+``symlink``
+	called by the symlink(2) system call.  Only required if you want
+	to support symlinks.  You will probably need to call
+	d_instantiate() just as you would in the create() method
+
+``mkdir``
+	called by the mkdir(2) system call.  Only required if you want
+	to support creating subdirectories.  You will probably need to
+	call d_instantiate() just as you would in the create() method
+
+``rmdir``
+	called by the rmdir(2) system call.  Only required if you want
+	to support deleting subdirectories
+
+``mknod``
+	called by the mknod(2) system call to create a device (char,
+	block) inode or a named pipe (FIFO) or socket.  Only required if
+	you want to support creating these types of inodes.  You will
+	probably need to call d_instantiate() just as you would in the
+	create() method
+
+``rename``
+	called by the rename(2) system call to rename the object to have
+	the parent and name given by the second inode and dentry.
+
+	The filesystem must return -EINVAL for any unsupported or
+	unknown flags.  Currently the following flags are implemented:
+	(1) RENAME_NOREPLACE: this flag indicates that if the target of
+	the rename exists the rename should fail with -EEXIST instead of
+	replacing the target.  The VFS already checks for existence, so
+	for local filesystems the RENAME_NOREPLACE implementation is
+	equivalent to plain rename.
+	(2) RENAME_EXCHANGE: exchange source and target.  Both must
+	exist; this is checked by the VFS.  Unlike plain rename, source
+	and target may be of different type.
+
+``get_link``
+	called by the VFS to follow a symbolic link to the inode it
+	points to.  Only required if you want to support symbolic links.
+	This method returns the symlink body to traverse (and possibly
+	resets the current position with nd_jump_link()).  If the body
+	won't go away until the inode is gone, nothing else is needed;
+	if it needs to be otherwise pinned, arrange for its release by
+	having get_link(..., ..., done) do set_delayed_call(done,
+	destructor, argument).  In that case destructor(argument) will
+	be called once VFS is done with the body you've returned.  May
+	be called in RCU mode; that is indicated by NULL dentry
+	argument.  If request can't be handled without leaving RCU mode,
+	have it return ERR_PTR(-ECHILD).
+
+	If the filesystem stores the symlink target in ->i_link, the
+	VFS may use it directly without calling ->get_link(); however,
+	->get_link() must still be provided.  ->i_link must not be
+	freed until after an RCU grace period.  Writing to ->i_link
+	post-iget() time requires a 'release' memory barrier.
+
+``readlink``
+	this is now just an override for use by readlink(2) for the
+	cases when ->get_link uses nd_jump_link() or object is not in
+	fact a symlink.  Normally filesystems should only implement
+	->get_link for symlinks and readlink(2) will automatically use
+	that.
+
+``permission``
+	called by the VFS to check for access rights on a POSIX-like
+	filesystem.
+
+	May be called in rcu-walk mode (mask & MAY_NOT_BLOCK).  If in
+	rcu-walk mode, the filesystem must check the permission without
+	blocking or storing to the inode.
+
+	If a situation is encountered that rcu-walk cannot handle,
+	return
+	-ECHILD and it will be called again in ref-walk mode.
+
+``setattr``
+	called by the VFS to set attributes for a file.  This method is
+	called by chmod(2) and related system calls.
+
+``getattr``
+	called by the VFS to get attributes of a file.  This method is
+	called by stat(2) and related system calls.
+
+``listxattr``
+	called by the VFS to list all extended attributes for a given
+	file.  This method is called by the listxattr(2) system call.
+
+``update_time``
+	called by the VFS to update a specific time or the i_version of
+	an inode.  If this is not defined the VFS will update the inode
+	itself and call mark_inode_dirty_sync.
+
+``atomic_open``
+	called on the last component of an open.  Using this optional
+	method the filesystem can look up, possibly create and open the
+	file in one atomic operation.  If it wants to leave actual
+	opening to the caller (e.g. if the file turned out to be a
+	symlink, device, or just something filesystem won't do atomic
+	open for), it may signal this by returning finish_no_open(file,
+	dentry).  This method is only called if the last component is
+	negative or needs lookup.  Cached positive dentries are still
+	handled by f_op->open().  If the file was created, FMODE_CREATED
+	flag should be set in file->f_mode.  In case of O_EXCL the
+	method must only succeed if the file didn't exist and hence
+	FMODE_CREATED shall always be set on success.
+
+``tmpfile``
+	called in the end of O_TMPFILE open().  Optional, equivalent to
+	atomically creating, opening and unlinking a file in given
+	directory.  On success needs to return with the file already
+	open; this can be done by calling finish_open_simple() right at
+	the end.
+
+``fileattr_get``
+	called on ioctl(FS_IOC_GETFLAGS) and ioctl(FS_IOC_FSGETXATTR) to
+	retrieve miscellaneous file flags and attributes.  Also called
+	before the relevant SET operation to check what is being changed
+	(in this case with i_rwsem locked exclusive).  If unset, then
+	fall back to f_op->ioctl().
+
+``fileattr_set``
+	called on ioctl(FS_IOC_SETFLAGS) and ioctl(FS_IOC_FSSETXATTR) to
+	change miscellaneous file flags and attributes.  Callers hold
+	i_rwsem exclusive.  If unset, then fall back to f_op->ioctl().
+
+
+The Address Space Object
+========================
+
+The address space object is used to group and manage pages in the page
+cache.  It can be used to keep track of the pages in a file (or anything
+else) and also track the mapping of sections of the file into process
+address spaces.
+
+There are a number of distinct yet related services that an
+address-space can provide.  These include communicating memory pressure,
+page lookup by address, and keeping track of pages tagged as Dirty or
+Writeback.
+
+The first can be used independently to the others.  The VM can try to
+either write dirty pages in order to clean them, or release clean pages
+in order to reuse them.  To do this it can call the ->writepage method
+on dirty pages, and ->release_folio on clean folios with the private
+flag set.  Clean pages without PagePrivate and with no external references
+will be released without notice being given to the address_space.
+
+To achieve this functionality, pages need to be placed on an LRU with
+lru_cache_add and mark_page_active needs to be called whenever the page
+is used.
+
+Pages are normally kept in a radix tree index by ->index.  This tree
+maintains information about the PG_Dirty and PG_Writeback status of each
+page, so that pages with either of these flags can be found quickly.
+
+The Dirty tag is primarily used by mpage_writepages - the default
+->writepages method.  It uses the tag to find dirty pages to call
+->writepage on.  If mpage_writepages is not used (i.e. the address
+provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is almost
+unused.  write_inode_now and sync_inode do use it (through
+__sync_single_inode) to check if ->writepages has been successful in
+writing out the whole address_space.
+
+The Writeback tag is used by filemap*wait* and sync_page* functions, via
+filemap_fdatawait_range, to wait for all writeback to complete.
+
+An address_space handler may attach extra information to a page,
+typically using the 'private' field in the 'struct page'.  If such
+information is attached, the PG_Private flag should be set.  This will
+cause various VM routines to make extra calls into the address_space
+handler to deal with that data.
+
+An address space acts as an intermediate between storage and
+application.  Data is read into the address space a whole page at a
+time, and provided to the application either by copying of the page, or
+by memory-mapping the page.  Data is written into the address space by
+the application, and then written-back to storage typically in whole
+pages, however the address_space has finer control of write sizes.
+
+The read process essentially only requires 'read_folio'.  The write
+process is more complicated and uses write_begin/write_end or
+dirty_folio to write data into the address_space, and writepage and
+writepages to writeback data to storage.
+
+Adding and removing pages to/from an address_space is protected by the
+inode's i_mutex.
+
+When data is written to a page, the PG_Dirty flag should be set.  It
+typically remains set until writepage asks for it to be written.  This
+should clear PG_Dirty and set PG_Writeback.  It can be actually written
+at any point after PG_Dirty is clear.  Once it is known to be safe,
+PG_Writeback is cleared.
+
+Writeback makes use of a writeback_control structure to direct the
+operations.  This gives the writepage and writepages operations some
+information about the nature of and reason for the writeback request,
+and the constraints under which it is being done.  It is also used to
+return information back to the caller about the result of a writepage or
+writepages request.
+
+
+Handling errors during writeback
+--------------------------------
+
+Most applications that do buffered I/O will periodically call a file
+synchronization call (fsync, fdatasync, msync or sync_file_range) to
+ensure that data written has made it to the backing store.  When there
+is an error during writeback, they expect that error to be reported when
+a file sync request is made.  After an error has been reported on one
+request, subsequent requests on the same file descriptor should return
+0, unless further writeback errors have occurred since the previous file
+syncronization.
+
+Ideally, the kernel would report errors only on file descriptions on
+which writes were done that subsequently failed to be written back.  The
+generic pagecache infrastructure does not track the file descriptions
+that have dirtied each individual page however, so determining which
+file descriptors should get back an error is not possible.
+
+Instead, the generic writeback error tracking infrastructure in the
+kernel settles for reporting errors to fsync on all file descriptions
+that were open at the time that the error occurred.  In a situation with
+multiple writers, all of them will get back an error on a subsequent
+fsync, even if all of the writes done through that particular file
+descriptor succeeded (or even if there were no writes on that file
+descriptor at all).
+
+Filesystems that wish to use this infrastructure should call
+mapping_set_error to record the error in the address_space when it
+occurs.  Then, after writing back data from the pagecache in their
+file->fsync operation, they should call file_check_and_advance_wb_err to
+ensure that the struct file's error cursor has advanced to the correct
+point in the stream of errors emitted by the backing device(s).
+
+
+struct address_space_operations
+-------------------------------
+
+This describes how the VFS can manipulate mapping of a file to page
+cache in your filesystem.  The following members are defined:
+
+.. code-block:: c
+
+	struct address_space_operations {
+		int (*writepage)(struct page *page, struct writeback_control *wbc);
+		int (*read_folio)(struct file *, struct folio *);
+		int (*writepages)(struct address_space *, struct writeback_control *);
+		bool (*dirty_folio)(struct address_space *, struct folio *);
+		void (*readahead)(struct readahead_control *);
+		int (*write_begin)(struct file *, struct address_space *mapping,
+				   loff_t pos, unsigned len,
+				struct page **pagep, void **fsdata);
+		int (*write_end)(struct file *, struct address_space *mapping,
+				 loff_t pos, unsigned len, unsigned copied,
+				 struct page *page, void *fsdata);
+		sector_t (*bmap)(struct address_space *, sector_t);
+		void (*invalidate_folio) (struct folio *, size_t start, size_t len);
+		bool (*release_folio)(struct folio *, gfp_t);
+		void (*free_folio)(struct folio *);
+		ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter);
+		int (*migrate_folio)(struct mapping *, struct folio *dst,
+				struct folio *src, enum migrate_mode);
+		int (*launder_folio) (struct folio *);
+
+		bool (*is_partially_uptodate) (struct folio *, size_t from,
+					       size_t count);
+		void (*is_dirty_writeback)(struct folio *, bool *, bool *);
+		int (*error_remove_page) (struct mapping *mapping, struct page *page);
+		int (*swap_activate)(struct swap_info_struct *sis, struct file *f, sector_t *span)
+		int (*swap_deactivate)(struct file *);
+		int (*swap_rw)(struct kiocb *iocb, struct iov_iter *iter);
+	};
+
+``writepage``
+	called by the VM to write a dirty page to backing store.  This
+	may happen for data integrity reasons (i.e. 'sync'), or to free
+	up memory (flush).  The difference can be seen in
+	wbc->sync_mode.  The PG_Dirty flag has been cleared and
+	PageLocked is true.  writepage should start writeout, should set
+	PG_Writeback, and should make sure the page is unlocked, either
+	synchronously or asynchronously when the write operation
+	completes.
+
+	If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to
+	try too hard if there are problems, and may choose to write out
+	other pages from the mapping if that is easier (e.g. due to
+	internal dependencies).  If it chooses not to start writeout, it
+	should return AOP_WRITEPAGE_ACTIVATE so that the VM will not
+	keep calling ->writepage on that page.
+
+	See the file "Locking" for more details.
+
+``read_folio``
+	Called by the page cache to read a folio from the backing store.
+	The 'file' argument supplies authentication information to network
+	filesystems, and is generally not used by block based filesystems.
+	It may be NULL if the caller does not have an open file (eg if
+	the kernel is performing a read for itself rather than on behalf
+	of a userspace process with an open file).
+
+	If the mapping does not support large folios, the folio will
+	contain a single page.	The folio will be locked when read_folio
+	is called.  If the read completes successfully, the folio should
+	be marked uptodate.  The filesystem should unlock the folio
+	once the read has completed, whether it was successful or not.
+	The filesystem does not need to modify the refcount on the folio;
+	the page cache holds a reference count and that will not be
+	released until the folio is unlocked.
+
+	Filesystems may implement ->read_folio() synchronously.
+	In normal operation, folios are read through the ->readahead()
+	method.  Only if this fails, or if the caller needs to wait for
+	the read to complete will the page cache call ->read_folio().
+	Filesystems should not attempt to perform their own readahead
+	in the ->read_folio() operation.
+
+	If the filesystem cannot perform the read at this time, it can
+	unlock the folio, do whatever action it needs to ensure that the
+	read will succeed in the future and return AOP_TRUNCATED_PAGE.
+	In this case, the caller should look up the folio, lock it,
+	and call ->read_folio again.
+
+	Callers may invoke the ->read_folio() method directly, but using
+	read_mapping_folio() will take care of locking, waiting for the
+	read to complete and handle cases such as AOP_TRUNCATED_PAGE.
+
+``writepages``
+	called by the VM to write out pages associated with the
+	address_space object.  If wbc->sync_mode is WB_SYNC_ALL, then
+	the writeback_control will specify a range of pages that must be
+	written out.  If it is WB_SYNC_NONE, then a nr_to_write is
+	given and that many pages should be written if possible.  If no
+	->writepages is given, then mpage_writepages is used instead.
+	This will choose pages from the address space that are tagged as
+	DIRTY and will pass them to ->writepage.
+
+``dirty_folio``
+	called by the VM to mark a folio as dirty.  This is particularly
+	needed if an address space attaches private data to a folio, and
+	that data needs to be updated when a folio is dirtied.  This is
+	called, for example, when a memory mapped page gets modified.
+	If defined, it should set the folio dirty flag, and the
+	PAGECACHE_TAG_DIRTY search mark in i_pages.
+
+``readahead``
+	Called by the VM to read pages associated with the address_space
+	object.  The pages are consecutive in the page cache and are
+	locked.  The implementation should decrement the page refcount
+	after starting I/O on each page.  Usually the page will be
+	unlocked by the I/O completion handler.  The set of pages are
+	divided into some sync pages followed by some async pages,
+	rac->ra->async_size gives the number of async pages.  The
+	filesystem should attempt to read all sync pages but may decide
+	to stop once it reaches the async pages.  If it does decide to
+	stop attempting I/O, it can simply return.  The caller will
+	remove the remaining pages from the address space, unlock them
+	and decrement the page refcount.  Set PageUptodate if the I/O
+	completes successfully.  Setting PageError on any page will be
+	ignored; simply unlock the page if an I/O error occurs.
+
+``write_begin``
+	Called by the generic buffered write code to ask the filesystem
+	to prepare to write len bytes at the given offset in the file.
+	The address_space should check that the write will be able to
+	complete, by allocating space if necessary and doing any other
+	internal housekeeping.  If the write will update parts of any
+	basic-blocks on storage, then those blocks should be pre-read
+	(if they haven't been read already) so that the updated blocks
+	can be written out properly.
+
+	The filesystem must return the locked pagecache page for the
+	specified offset, in ``*pagep``, for the caller to write into.
+
+	It must be able to cope with short writes (where the length
+	passed to write_begin is greater than the number of bytes copied
+	into the page).
+
+	A void * may be returned in fsdata, which then gets passed into
+	write_end.
+
+	Returns 0 on success; < 0 on failure (which is the error code),
+	in which case write_end is not called.
+
+``write_end``
+	After a successful write_begin, and data copy, write_end must be
+	called.  len is the original len passed to write_begin, and
+	copied is the amount that was able to be copied.
+
+	The filesystem must take care of unlocking the page and
+	releasing it refcount, and updating i_size.
+
+	Returns < 0 on failure, otherwise the number of bytes (<=
+	'copied') that were able to be copied into pagecache.
+
+``bmap``
+	called by the VFS to map a logical block offset within object to
+	physical block number.  This method is used by the FIBMAP ioctl
+	and for working with swap-files.  To be able to swap to a file,
+	the file must have a stable mapping to a block device.  The swap
+	system does not go through the filesystem but instead uses bmap
+	to find out where the blocks in the file are and uses those
+	addresses directly.
+
+``invalidate_folio``
+	If a folio has private data, then invalidate_folio will be
+	called when part or all of the folio is to be removed from the
+	address space.  This generally corresponds to either a
+	truncation, punch hole or a complete invalidation of the address
+	space (in the latter case 'offset' will always be 0 and 'length'
+	will be folio_size()).  Any private data associated with the folio
+	should be updated to reflect this truncation.  If offset is 0
+	and length is folio_size(), then the private data should be
+	released, because the folio must be able to be completely
+	discarded.  This may be done by calling the ->release_folio
+	function, but in this case the release MUST succeed.
+
+``release_folio``
+	release_folio is called on folios with private data to tell the
+	filesystem that the folio is about to be freed.  ->release_folio
+	should remove any private data from the folio and clear the
+	private flag.  If release_folio() fails, it should return false.
+	release_folio() is used in two distinct though related cases.
+	The first is when the VM wants to free a clean folio with no
+	active users.  If ->release_folio succeeds, the folio will be
+	removed from the address_space and be freed.
+
+	The second case is when a request has been made to invalidate
+	some or all folios in an address_space.  This can happen
+	through the fadvise(POSIX_FADV_DONTNEED) system call or by the
+	filesystem explicitly requesting it as nfs and 9p do (when they
+	believe the cache may be out of date with storage) by calling
+	invalidate_inode_pages2().  If the filesystem makes such a call,
+	and needs to be certain that all folios are invalidated, then
+	its release_folio will need to ensure this.  Possibly it can
+	clear the uptodate flag if it cannot free private data yet.
+
+``free_folio``
+	free_folio is called once the folio is no longer visible in the
+	page cache in order to allow the cleanup of any private data.
+	Since it may be called by the memory reclaimer, it should not
+	assume that the original address_space mapping still exists, and
+	it should not block.
+
+``direct_IO``
+	called by the generic read/write routines to perform direct_IO -
+	that is IO requests which bypass the page cache and transfer
+	data directly between the storage and the application's address
+	space.
+
+``migrate_folio``
+	This is used to compact the physical memory usage.  If the VM
+	wants to relocate a folio (maybe from a memory device that is
+	signalling imminent failure) it will pass a new folio and an old
+	folio to this function.  migrate_folio should transfer any private
+	data across and update any references that it has to the folio.
+
+``launder_folio``
+	Called before freeing a folio - it writes back the dirty folio.
+	To prevent redirtying the folio, it is kept locked during the
+	whole operation.
+
+``is_partially_uptodate``
+	Called by the VM when reading a file through the pagecache when
+	the underlying blocksize is smaller than the size of the folio.
+	If the required block is up to date then the read can complete
+	without needing I/O to bring the whole page up to date.
+
+``is_dirty_writeback``
+	Called by the VM when attempting to reclaim a folio.  The VM uses
+	dirty and writeback information to determine if it needs to
+	stall to allow flushers a chance to complete some IO.
+	Ordinarily it can use folio_test_dirty and folio_test_writeback but
+	some filesystems have more complex state (unstable folios in NFS
+	prevent reclaim) or do not set those flags due to locking
+	problems.  This callback allows a filesystem to indicate to the
+	VM if a folio should be treated as dirty or writeback for the
+	purposes of stalling.
+
+``error_remove_page``
+	normally set to generic_error_remove_page if truncation is ok
+	for this address space.  Used for memory failure handling.
+	Setting this implies you deal with pages going away under you,
+	unless you have them locked or reference counts increased.
+
+``swap_activate``
+
+	Called to prepare the given file for swap.  It should perform
+	any validation and preparation necessary to ensure that writes
+	can be performed with minimal memory allocation.  It should call
+	add_swap_extent(), or the helper iomap_swapfile_activate(), and
+	return the number of extents added.  If IO should be submitted
+	through ->swap_rw(), it should set SWP_FS_OPS, otherwise IO will
+	be submitted directly to the block device ``sis->bdev``.
+
+``swap_deactivate``
+	Called during swapoff on files where swap_activate was
+	successful.
+
+``swap_rw``
+	Called to read or write swap pages when SWP_FS_OPS is set.
+
+The File Object
+===============
+
+A file object represents a file opened by a process.  This is also known
+as an "open file description" in POSIX parlance.
+
+
+struct file_operations
+----------------------
+
+This describes how the VFS can manipulate an open file.  As of kernel
+4.18, the following members are defined:
+
+.. code-block:: c
+
+	struct file_operations {
+		struct module *owner;
+		loff_t (*llseek) (struct file *, loff_t, int);
+		ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
+		ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
+		ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
+		ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
+		int (*iopoll)(struct kiocb *kiocb, bool spin);
+		int (*iterate) (struct file *, struct dir_context *);
+		int (*iterate_shared) (struct file *, struct dir_context *);
+		__poll_t (*poll) (struct file *, struct poll_table_struct *);
+		long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
+		long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
+		int (*mmap) (struct file *, struct vm_area_struct *);
+		int (*open) (struct inode *, struct file *);
+		int (*flush) (struct file *, fl_owner_t id);
+		int (*release) (struct inode *, struct file *);
+		int (*fsync) (struct file *, loff_t, loff_t, int datasync);
+		int (*fasync) (int, struct file *, int);
+		int (*lock) (struct file *, int, struct file_lock *);
+		ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
+		unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
+		int (*check_flags)(int);
+		int (*flock) (struct file *, int, struct file_lock *);
+		ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);
+		ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);
+		int (*setlease)(struct file *, long, struct file_lock **, void **);
+		long (*fallocate)(struct file *file, int mode, loff_t offset,
+				  loff_t len);
+		void (*show_fdinfo)(struct seq_file *m, struct file *f);
+	#ifndef CONFIG_MMU
+		unsigned (*mmap_capabilities)(struct file *);
+	#endif
+		ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, loff_t, size_t, unsigned int);
+		loff_t (*remap_file_range)(struct file *file_in, loff_t pos_in,
+					   struct file *file_out, loff_t pos_out,
+					   loff_t len, unsigned int remap_flags);
+		int (*fadvise)(struct file *, loff_t, loff_t, int);
+	};
+
+Again, all methods are called without any locks being held, unless
+otherwise noted.
+
+``llseek``
+	called when the VFS needs to move the file position index
+
+``read``
+	called by read(2) and related system calls
+
+``read_iter``
+	possibly asynchronous read with iov_iter as destination
+
+``write``
+	called by write(2) and related system calls
+
+``write_iter``
+	possibly asynchronous write with iov_iter as source
+
+``iopoll``
+	called when aio wants to poll for completions on HIPRI iocbs
+
+``iterate``
+	called when the VFS needs to read the directory contents
+
+``iterate_shared``
+	called when the VFS needs to read the directory contents when
+	filesystem supports concurrent dir iterators
+
+``poll``
+	called by the VFS when a process wants to check if there is
+	activity on this file and (optionally) go to sleep until there
+	is activity.  Called by the select(2) and poll(2) system calls
+
+``unlocked_ioctl``
+	called by the ioctl(2) system call.
+
+``compat_ioctl``
+	called by the ioctl(2) system call when 32 bit system calls are
+	 used on 64 bit kernels.
+
+``mmap``
+	called by the mmap(2) system call
+
+``open``
+	called by the VFS when an inode should be opened.  When the VFS
+	opens a file, it creates a new "struct file".  It then calls the
+	open method for the newly allocated file structure.  You might
+	think that the open method really belongs in "struct
+	inode_operations", and you may be right.  I think it's done the
+	way it is because it makes filesystems simpler to implement.
+	The open() method is a good place to initialize the
+	"private_data" member in the file structure if you want to point
+	to a device structure
+
+``flush``
+	called by the close(2) system call to flush a file
+
+``release``
+	called when the last reference to an open file is closed
+
+``fsync``
+	called by the fsync(2) system call.  Also see the section above
+	entitled "Handling errors during writeback".
+
+``fasync``
+	called by the fcntl(2) system call when asynchronous
+	(non-blocking) mode is enabled for a file
+
+``lock``
+	called by the fcntl(2) system call for F_GETLK, F_SETLK, and
+	F_SETLKW commands
+
+``get_unmapped_area``
+	called by the mmap(2) system call
+
+``check_flags``
+	called by the fcntl(2) system call for F_SETFL command
+
+``flock``
+	called by the flock(2) system call
+
+``splice_write``
+	called by the VFS to splice data from a pipe to a file.  This
+	method is used by the splice(2) system call
+
+``splice_read``
+	called by the VFS to splice data from file to a pipe.  This
+	method is used by the splice(2) system call
+
+``setlease``
+	called by the VFS to set or release a file lock lease.  setlease
+	implementations should call generic_setlease to record or remove
+	the lease in the inode after setting it.
+
+``fallocate``
+	called by the VFS to preallocate blocks or punch a hole.
+
+``copy_file_range``
+	called by the copy_file_range(2) system call.
+
+``remap_file_range``
+	called by the ioctl(2) system call for FICLONERANGE and FICLONE
+	and FIDEDUPERANGE commands to remap file ranges.  An
+	implementation should remap len bytes at pos_in of the source
+	file into the dest file at pos_out.  Implementations must handle
+	callers passing in len == 0; this means "remap to the end of the
+	source file".  The return value should the number of bytes
+	remapped, or the usual negative error code if errors occurred
+	before any bytes were remapped.  The remap_flags parameter
+	accepts REMAP_FILE_* flags.  If REMAP_FILE_DEDUP is set then the
+	implementation must only remap if the requested file ranges have
+	identical contents.  If REMAP_FILE_CAN_SHORTEN is set, the caller is
+	ok with the implementation shortening the request length to
+	satisfy alignment or EOF requirements (or any other reason).
+
+``fadvise``
+	possibly called by the fadvise64() system call.
+
+Note that the file operations are implemented by the specific
+filesystem in which the inode resides.  When opening a device node
+(character or block special) most filesystems will call special
+support routines in the VFS which will locate the required device
+driver information.  These support routines replace the filesystem file
+operations with those for the device driver, and then proceed to call
+the new open() method for the file.  This is how opening a device file
+in the filesystem eventually ends up calling the device driver open()
+method.
+
+
+Directory Entry Cache (dcache)
+==============================
+
+
+struct dentry_operations
+------------------------
+
+This describes how a filesystem can overload the standard dentry
+operations.  Dentries and the dcache are the domain of the VFS and the
+individual filesystem implementations.  Device drivers have no business
+here.  These methods may be set to NULL, as they are either optional or
+the VFS uses a default.  As of kernel 2.6.22, the following members are
+defined:
+
+.. code-block:: c
+
+	struct dentry_operations {
+		int (*d_revalidate)(struct dentry *, unsigned int);
+		int (*d_weak_revalidate)(struct dentry *, unsigned int);
+		int (*d_hash)(const struct dentry *, struct qstr *);
+		int (*d_compare)(const struct dentry *,
+				 unsigned int, const char *, const struct qstr *);
+		int (*d_delete)(const struct dentry *);
+		int (*d_init)(struct dentry *);
+		void (*d_release)(struct dentry *);
+		void (*d_iput)(struct dentry *, struct inode *);
+		char *(*d_dname)(struct dentry *, char *, int);
+		struct vfsmount *(*d_automount)(struct path *);
+		int (*d_manage)(const struct path *, bool);
+		struct dentry *(*d_real)(struct dentry *, const struct inode *);
+	};
+
+``d_revalidate``
+	called when the VFS needs to revalidate a dentry.  This is
+	called whenever a name look-up finds a dentry in the dcache.
+	Most local filesystems leave this as NULL, because all their
+	dentries in the dcache are valid.  Network filesystems are
+	different since things can change on the server without the
+	client necessarily being aware of it.
+
+	This function should return a positive value if the dentry is
+	still valid, and zero or a negative error code if it isn't.
+
+	d_revalidate may be called in rcu-walk mode (flags &
+	LOOKUP_RCU).  If in rcu-walk mode, the filesystem must
+	revalidate the dentry without blocking or storing to the dentry,
+	d_parent and d_inode should not be used without care (because
+	they can change and, in d_inode case, even become NULL under
+	us).
+
+	If a situation is encountered that rcu-walk cannot handle,
+	return
+	-ECHILD and it will be called again in ref-walk mode.
+
+``d_weak_revalidate``
+	called when the VFS needs to revalidate a "jumped" dentry.  This
+	is called when a path-walk ends at dentry that was not acquired
+	by doing a lookup in the parent directory.  This includes "/",
+	"." and "..", as well as procfs-style symlinks and mountpoint
+	traversal.
+
+	In this case, we are less concerned with whether the dentry is
+	still fully correct, but rather that the inode is still valid.
+	As with d_revalidate, most local filesystems will set this to
+	NULL since their dcache entries are always valid.
+
+	This function has the same return code semantics as
+	d_revalidate.
+
+	d_weak_revalidate is only called after leaving rcu-walk mode.
+
+``d_hash``
+	called when the VFS adds a dentry to the hash table.  The first
+	dentry passed to d_hash is the parent directory that the name is
+	to be hashed into.
+
+	Same locking and synchronisation rules as d_compare regarding
+	what is safe to dereference etc.
+
+``d_compare``
+	called to compare a dentry name with a given name.  The first
+	dentry is the parent of the dentry to be compared, the second is
+	the child dentry.  len and name string are properties of the
+	dentry to be compared.  qstr is the name to compare it with.
+
+	Must be constant and idempotent, and should not take locks if
+	possible, and should not or store into the dentry.  Should not
+	dereference pointers outside the dentry without lots of care
+	(eg.  d_parent, d_inode, d_name should not be used).
+
+	However, our vfsmount is pinned, and RCU held, so the dentries
+	and inodes won't disappear, neither will our sb or filesystem
+	module.  ->d_sb may be used.
+
+	It is a tricky calling convention because it needs to be called
+	under "rcu-walk", ie. without any locks or references on things.
+
+``d_delete``
+	called when the last reference to a dentry is dropped and the
+	dcache is deciding whether or not to cache it.  Return 1 to
+	delete immediately, or 0 to cache the dentry.  Default is NULL
+	which means to always cache a reachable dentry.  d_delete must
+	be constant and idempotent.
+
+``d_init``
+	called when a dentry is allocated
+
+``d_release``
+	called when a dentry is really deallocated
+
+``d_iput``
+	called when a dentry loses its inode (just prior to its being
+	deallocated).  The default when this is NULL is that the VFS
+	calls iput().  If you define this method, you must call iput()
+	yourself
+
+``d_dname``
+	called when the pathname of a dentry should be generated.
+	Useful for some pseudo filesystems (sockfs, pipefs, ...) to
+	delay pathname generation.  (Instead of doing it when dentry is
+	created, it's done only when the path is needed.).  Real
+	filesystems probably dont want to use it, because their dentries
+	are present in global dcache hash, so their hash should be an
+	invariant.  As no lock is held, d_dname() should not try to
+	modify the dentry itself, unless appropriate SMP safety is used.
+	CAUTION : d_path() logic is quite tricky.  The correct way to
+	return for example "Hello" is to put it at the end of the
+	buffer, and returns a pointer to the first char.
+	dynamic_dname() helper function is provided to take care of
+	this.
+
+	Example :
+
+.. code-block:: c
+
+	static char *pipefs_dname(struct dentry *dent, char *buffer, int buflen)
+	{
+		return dynamic_dname(dentry, buffer, buflen, "pipe:[%lu]",
+				dentry->d_inode->i_ino);
+	}
+
+``d_automount``
+	called when an automount dentry is to be traversed (optional).
+	This should create a new VFS mount record and return the record
+	to the caller.  The caller is supplied with a path parameter
+	giving the automount directory to describe the automount target
+	and the parent VFS mount record to provide inheritable mount
+	parameters.  NULL should be returned if someone else managed to
+	make the automount first.  If the vfsmount creation failed, then
+	an error code should be returned.  If -EISDIR is returned, then
+	the directory will be treated as an ordinary directory and
+	returned to pathwalk to continue walking.
+
+	If a vfsmount is returned, the caller will attempt to mount it
+	on the mountpoint and will remove the vfsmount from its
+	expiration list in the case of failure.  The vfsmount should be
+	returned with 2 refs on it to prevent automatic expiration - the
+	caller will clean up the additional ref.
+
+	This function is only used if DCACHE_NEED_AUTOMOUNT is set on
+	the dentry.  This is set by __d_instantiate() if S_AUTOMOUNT is
+	set on the inode being added.
+
+``d_manage``
+	called to allow the filesystem to manage the transition from a
+	dentry (optional).  This allows autofs, for example, to hold up
+	clients waiting to explore behind a 'mountpoint' while letting
+	the daemon go past and construct the subtree there.  0 should be
+	returned to let the calling process continue.  -EISDIR can be
+	returned to tell pathwalk to use this directory as an ordinary
+	directory and to ignore anything mounted on it and not to check
+	the automount flag.  Any other error code will abort pathwalk
+	completely.
+
+	If the 'rcu_walk' parameter is true, then the caller is doing a
+	pathwalk in RCU-walk mode.  Sleeping is not permitted in this
+	mode, and the caller can be asked to leave it and call again by
+	returning -ECHILD.  -EISDIR may also be returned to tell
+	pathwalk to ignore d_automount or any mounts.
+
+	This function is only used if DCACHE_MANAGE_TRANSIT is set on
+	the dentry being transited from.
+
+``d_real``
+	overlay/union type filesystems implement this method to return
+	one of the underlying dentries hidden by the overlay.  It is
+	used in two different modes:
+
+	Called from file_dentry() it returns the real dentry matching
+	the inode argument.  The real dentry may be from a lower layer
+	already copied up, but still referenced from the file.  This
+	mode is selected with a non-NULL inode argument.
+
+	With NULL inode the topmost real underlying dentry is returned.
+
+Each dentry has a pointer to its parent dentry, as well as a hash list
+of child dentries.  Child dentries are basically like files in a
+directory.
+
+
+Directory Entry Cache API
+--------------------------
+
+There are a number of functions defined which permit a filesystem to
+manipulate dentries:
+
+``dget``
+	open a new handle for an existing dentry (this just increments
+	the usage count)
+
+``dput``
+	close a handle for a dentry (decrements the usage count).  If
+	the usage count drops to 0, and the dentry is still in its
+	parent's hash, the "d_delete" method is called to check whether
+	it should be cached.  If it should not be cached, or if the
+	dentry is not hashed, it is deleted.  Otherwise cached dentries
+	are put into an LRU list to be reclaimed on memory shortage.
+
+``d_drop``
+	this unhashes a dentry from its parents hash list.  A subsequent
+	call to dput() will deallocate the dentry if its usage count
+	drops to 0
+
+``d_delete``
+	delete a dentry.  If there are no other open references to the
+	dentry then the dentry is turned into a negative dentry (the
+	d_iput() method is called).  If there are other references, then
+	d_drop() is called instead
+
+``d_add``
+	add a dentry to its parents hash list and then calls
+	d_instantiate()
+
+``d_instantiate``
+	add a dentry to the alias hash list for the inode and updates
+	the "d_inode" member.  The "i_count" member in the inode
+	structure should be set/incremented.  If the inode pointer is
+	NULL, the dentry is called a "negative dentry".  This function
+	is commonly called when an inode is created for an existing
+	negative dentry
+
+``d_lookup``
+	look up a dentry given its parent and path name component It
+	looks up the child of that given name from the dcache hash
+	table.  If it is found, the reference count is incremented and
+	the dentry is returned.  The caller must use dput() to free the
+	dentry when it finishes using it.
+
+
+Mount Options
+=============
+
+
+Parsing options
+---------------
+
+On mount and remount the filesystem is passed a string containing a
+comma separated list of mount options.  The options can have either of
+these forms:
+
+  option
+  option=value
+
+The <linux/parser.h> header defines an API that helps parse these
+options.  There are plenty of examples on how to use it in existing
+filesystems.
+
+
+Showing options
+---------------
+
+If a filesystem accepts mount options, it must define show_options() to
+show all the currently active options.  The rules are:
+
+  - options MUST be shown which are not default or their values differ
+    from the default
+
+  - options MAY be shown which are enabled by default or have their
+    default value
+
+Options used only internally between a mount helper and the kernel (such
+as file descriptors), or which only have an effect during the mounting
+(such as ones controlling the creation of a journal) are exempt from the
+above rules.
+
+The underlying reason for the above rules is to make sure, that a mount
+can be accurately replicated (e.g. umounting and mounting again) based
+on the information found in /proc/mounts.
+
+
+Resources
+=========
+
+(Note some of these resources are not up-to-date with the latest kernel
+ version.)
+
+Creating Linux virtual filesystems. 2002
+    <https://lwn.net/Articles/13325/>
+
+The Linux Virtual File-system Layer by Neil Brown. 1999
+    <http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/vfs.html>
+
+A tour of the Linux VFS by Michael K. Johnson. 1996
+    <https://www.tldp.org/LDP/khg/HyperNews/get/fs/vfstour.html>
+
+A small trail through the Linux kernel by Andries Brouwer. 2001
+    <https://www.win.tue.nl/~aeb/linux/vfs/trail.html>