Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 78 insertions, 0 deletions

diff --git a/Documentation/hwmon/asus_wmi_sensors.rst b/Documentation/hwmon/asus_wmi_sensors.rst
new file mode 100644
index 000000000..8f2096cf5
--- /dev/null
+++ b/Documentation/hwmon/asus_wmi_sensors.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_wmi_sensors
+=================================
+
+Supported boards:
+ * PRIME X399-A,
+ * PRIME X470-PRO,
+ * ROG CROSSHAIR VI EXTREME,
+ * ROG CROSSHAIR VI HERO,
+ * ROG CROSSHAIR VI HERO (WI-FI AC),
+ * ROG CROSSHAIR VII HERO,
+ * ROG CROSSHAIR VII HERO (WI-FI),
+ * ROG STRIX B450-E GAMING,
+ * ROG STRIX B450-F GAMING,
+ * ROG STRIX B450-I GAMING,
+ * ROG STRIX X399-E GAMING,
+ * ROG STRIX X470-F GAMING,
+ * ROG STRIX X470-I GAMING,
+ * ROG ZENITH EXTREME,
+ * ROG ZENITH EXTREME ALPHA.
+
+Authors:
+    - Ed Brindley <kernel@maidavale.org>
+
+Description:
+------------
+ASUS mainboards publish hardware monitoring information via WMI interface.
+
+ASUS WMI interface provides a methods to get list of sensors and values of
+such, which is utilized by this driver to publish those sensor readings to the
+HWMON system.
+
+The driver is aware of and reads the following sensors:
+ * CPU Core Voltage,
+ * CPU SOC Voltage,
+ * DRAM Voltage,
+ * VDDP Voltage,
+ * 1.8V PLL Voltage,
+ * +12V Voltage,
+ * +5V Voltage,
+ * 3VSB Voltage,
+ * VBAT Voltage,
+ * AVCC3 Voltage,
+ * SB 1.05V Voltage,
+ * CPU Core Voltage,
+ * CPU SOC Voltage,
+ * DRAM Voltage,
+ * CPU Fan RPM,
+ * Chassis Fan 1 RPM,
+ * Chassis Fan 2 RPM,
+ * Chassis Fan 3 RPM,
+ * HAMP Fan RPM,
+ * Water Pump RPM,
+ * CPU OPT RPM,
+ * Water Flow RPM,
+ * AIO Pump RPM,
+ * CPU Temperature,
+ * CPU Socket Temperature,
+ * Motherboard Temperature,
+ * Chipset Temperature,
+ * Tsensor 1 Temperature,
+ * CPU VRM Temperature,
+ * Water In,
+ * Water Out,
+ * CPU VRM Output Current.
+
+Known Issues:
+ * The WMI implementation in some of Asus' BIOSes is buggy. This can result in
+   fans stopping, fans getting stuck at max speed, or temperature readouts
+   getting stuck. This is not an issue with the driver, but the BIOS. The Prime
+   X470 Pro seems particularly bad for this. The more frequently the WMI
+   interface is polled the greater the potential for this to happen. Until you
+   have subjected your computer to an extended soak test while polling the
+   sensors frequently, don't leave you computer unattended. Upgrading to new
+   BIOS version with method version greater than or equal to two should
+   rectify the issue.
+ * A few boards report 12v voltages to be ~10v.