Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

28 files changed, 6786 insertions, 0 deletions

diff --git a/Documentation/power/apm-acpi.rst b/Documentation/power/apm-acpi.rst
new file mode 100644
index 000000000..5b90d9471
--- /dev/null
+++ b/Documentation/power/apm-acpi.rst
@@ -0,0 +1,36 @@
+============
+APM or ACPI?
+============
+
+If you have a relatively recent x86 mobile, desktop, or server system,
+odds are it supports either Advanced Power Management (APM) or
+Advanced Configuration and Power Interface (ACPI).  ACPI is the newer
+of the two technologies and puts power management in the hands of the
+operating system, allowing for more intelligent power management than
+is possible with BIOS controlled APM.
+
+The best way to determine which, if either, your system supports is to
+build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
+enabled by default).  If a working ACPI implementation is found, the
+ACPI driver will override and disable APM, otherwise the APM driver
+will be used.
+
+No, sorry, you cannot have both ACPI and APM enabled and running at
+once.  Some people with broken ACPI or broken APM implementations
+would like to use both to get a full set of working features, but you
+simply cannot mix and match the two.  Only one power management
+interface can be in control of the machine at once.  Think about it..
+
+User-space Daemons
+------------------
+Both APM and ACPI rely on user-space daemons, apmd and acpid
+respectively, to be completely functional.  Obtain both of these
+daemons from your Linux distribution or from the Internet (see below)
+and be sure that they are started sometime in the system boot process.
+Go ahead and start both.  If ACPI or APM is not available on your
+system the associated daemon will exit gracefully.
+
+  =====  =======================================
+  apmd   http://ftp.debian.org/pool/main/a/apmd/
+  acpid  http://acpid.sf.net/
+  =====  =======================================
diff --git a/Documentation/power/basic-pm-debugging.rst b/Documentation/power/basic-pm-debugging.rst
new file mode 100644
index 000000000..69862e759
--- /dev/null
+++ b/Documentation/power/basic-pm-debugging.rst
@@ -0,0 +1,269 @@
+=================================
+Debugging hibernation and suspend
+=================================
+
+	(C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
+
+1. Testing hibernation (aka suspend to disk or STD)
+===================================================
+
+To check if hibernation works, you can try to hibernate in the "reboot" mode::
+
+	# echo reboot > /sys/power/disk
+	# echo disk > /sys/power/state
+
+and the system should create a hibernation image, reboot, resume and get back to
+the command prompt where you have started the transition.  If that happens,
+hibernation is most likely to work correctly.  Still, you need to repeat the
+test at least a couple of times in a row for confidence.  [This is necessary,
+because some problems only show up on a second attempt at suspending and
+resuming the system.]  Moreover, hibernating in the "reboot" and "shutdown"
+modes causes the PM core to skip some platform-related callbacks which on ACPI
+systems might be necessary to make hibernation work.  Thus, if your machine
+fails to hibernate or resume in the "reboot" mode, you should try the
+"platform" mode::
+
+	# echo platform > /sys/power/disk
+	# echo disk > /sys/power/state
+
+which is the default and recommended mode of hibernation.
+
+Unfortunately, the "platform" mode of hibernation does not work on some systems
+with broken BIOSes.  In such cases the "shutdown" mode of hibernation might
+work::
+
+	# echo shutdown > /sys/power/disk
+	# echo disk > /sys/power/state
+
+(it is similar to the "reboot" mode, but it requires you to press the power
+button to make the system resume).
+
+If neither "platform" nor "shutdown" hibernation mode works, you will need to
+identify what goes wrong.
+
+a) Test modes of hibernation
+----------------------------
+
+To find out why hibernation fails on your system, you can use a special testing
+facility available if the kernel is compiled with CONFIG_PM_DEBUG set.  Then,
+there is the file /sys/power/pm_test that can be used to make the hibernation
+core run in a test mode.  There are 5 test modes available:
+
+freezer
+	- test the freezing of processes
+
+devices
+	- test the freezing of processes and suspending of devices
+
+platform
+	- test the freezing of processes, suspending of devices and platform
+	  global control methods [1]_
+
+processors
+	- test the freezing of processes, suspending of devices, platform
+	  global control methods [1]_ and the disabling of nonboot CPUs
+
+core
+	- test the freezing of processes, suspending of devices, platform global
+	  control methods\ [1]_, the disabling of nonboot CPUs and suspending
+	  of platform/system devices
+
+.. [1]
+
+    the platform global control methods are only available on ACPI systems
+    and are only tested if the hibernation mode is set to "platform"
+
+To use one of them it is necessary to write the corresponding string to
+/sys/power/pm_test (eg. "devices" to test the freezing of processes and
+suspending devices) and issue the standard hibernation commands.  For example,
+to use the "devices" test mode along with the "platform" mode of hibernation,
+you should do the following::
+
+	# echo devices > /sys/power/pm_test
+	# echo platform > /sys/power/disk
+	# echo disk > /sys/power/state
+
+Then, the kernel will try to freeze processes, suspend devices, wait a few
+seconds (5 by default, but configurable by the suspend.pm_test_delay module
+parameter), resume devices and thaw processes.  If "platform" is written to
+/sys/power/pm_test , then after suspending devices the kernel will additionally
+invoke the global control methods (eg. ACPI global control methods) used to
+prepare the platform firmware for hibernation.  Next, it will wait a
+configurable number of seconds and invoke the platform (eg. ACPI) global
+methods used to cancel hibernation etc.
+
+Writing "none" to /sys/power/pm_test causes the kernel to switch to the normal
+hibernation/suspend operations.  Also, when open for reading, /sys/power/pm_test
+contains a space-separated list of all available tests (including "none" that
+represents the normal functionality) in which the current test level is
+indicated by square brackets.
+
+Generally, as you can see, each test level is more "invasive" than the previous
+one and the "core" level tests the hardware and drivers as deeply as possible
+without creating a hibernation image.  Obviously, if the "devices" test fails,
+the "platform" test will fail as well and so on.  Thus, as a rule of thumb, you
+should try the test modes starting from "freezer", through "devices", "platform"
+and "processors" up to "core" (repeat the test on each level a couple of times
+to make sure that any random factors are avoided).
+
+If the "freezer" test fails, there is a task that cannot be frozen (in that case
+it usually is possible to identify the offending task by analysing the output of
+dmesg obtained after the failing test).  Failure at this level usually means
+that there is a problem with the tasks freezer subsystem that should be
+reported.
+
+If the "devices" test fails, most likely there is a driver that cannot suspend
+or resume its device (in the latter case the system may hang or become unstable
+after the test, so please take that into consideration).  To find this driver,
+you can carry out a binary search according to the rules:
+
+- if the test fails, unload a half of the drivers currently loaded and repeat
+  (that would probably involve rebooting the system, so always note what drivers
+  have been loaded before the test),
+- if the test succeeds, load a half of the drivers you have unloaded most
+  recently and repeat.
+
+Once you have found the failing driver (there can be more than just one of
+them), you have to unload it every time before hibernation.  In that case please
+make sure to report the problem with the driver.
+
+It is also possible that the "devices" test will still fail after you have
+unloaded all modules. In that case, you may want to look in your kernel
+configuration for the drivers that can be compiled as modules (and test again
+with these drivers compiled as modules).  You may also try to use some special
+kernel command line options such as "noapic", "noacpi" or even "acpi=off".
+
+If the "platform" test fails, there is a problem with the handling of the
+platform (eg. ACPI) firmware on your system.  In that case the "platform" mode
+of hibernation is not likely to work.  You can try the "shutdown" mode, but that
+is rather a poor man's workaround.
+
+If the "processors" test fails, the disabling/enabling of nonboot CPUs does not
+work (of course, this only may be an issue on SMP systems) and the problem
+should be reported.  In that case you can also try to switch the nonboot CPUs
+off and on using the /sys/devices/system/cpu/cpu*/online sysfs attributes and
+see if that works.
+
+If the "core" test fails, which means that suspending of the system/platform
+devices has failed (these devices are suspended on one CPU with interrupts off),
+the problem is most probably hardware-related and serious, so it should be
+reported.
+
+A failure of any of the "platform", "processors" or "core" tests may cause your
+system to hang or become unstable, so please beware.  Such a failure usually
+indicates a serious problem that very well may be related to the hardware, but
+please report it anyway.
+
+b) Testing minimal configuration
+--------------------------------
+
+If all of the hibernation test modes work, you can boot the system with the
+"init=/bin/bash" command line parameter and attempt to hibernate in the
+"reboot", "shutdown" and "platform" modes.  If that does not work, there
+probably is a problem with a driver statically compiled into the kernel and you
+can try to compile more drivers as modules, so that they can be tested
+individually.  Otherwise, there is a problem with a modular driver and you can
+find it by loading a half of the modules you normally use and binary searching
+in accordance with the algorithm:
+- if there are n modules loaded and the attempt to suspend and resume fails,
+unload n/2 of the modules and try again (that would probably involve rebooting
+the system),
+- if there are n modules loaded and the attempt to suspend and resume succeeds,
+load n/2 modules more and try again.
+
+Again, if you find the offending module(s), it(they) must be unloaded every time
+before hibernation, and please report the problem with it(them).
+
+c) Using the "test_resume" hibernation option
+---------------------------------------------
+
+/sys/power/disk generally tells the kernel what to do after creating a
+hibernation image.  One of the available options is "test_resume" which
+causes the just created image to be used for immediate restoration.  Namely,
+after doing::
+
+	# echo test_resume > /sys/power/disk
+	# echo disk > /sys/power/state
+
+a hibernation image will be created and a resume from it will be triggered
+immediately without involving the platform firmware in any way.
+
+That test can be used to check if failures to resume from hibernation are
+related to bad interactions with the platform firmware.  That is, if the above
+works every time, but resume from actual hibernation does not work or is
+unreliable, the platform firmware may be responsible for the failures.
+
+On architectures and platforms that support using different kernels to restore
+hibernation images (that is, the kernel used to read the image from storage and
+load it into memory is different from the one included in the image) or support
+kernel address space randomization, it also can be used to check if failures
+to resume may be related to the differences between the restore and image
+kernels.
+
+d) Advanced debugging
+---------------------
+
+In case that hibernation does not work on your system even in the minimal
+configuration and compiling more drivers as modules is not practical or some
+modules cannot be unloaded, you can use one of the more advanced debugging
+techniques to find the problem.  First, if there is a serial port in your box,
+you can boot the kernel with the 'no_console_suspend' parameter and try to log
+kernel messages using the serial console.  This may provide you with some
+information about the reasons of the suspend (resume) failure.  Alternatively,
+it may be possible to use a FireWire port for debugging with firescope
+(http://v3.sk/~lkundrak/firescope/).  On x86 it is also possible to
+use the PM_TRACE mechanism documented in Documentation/power/s2ram.rst .
+
+2. Testing suspend to RAM (STR)
+===============================
+
+To verify that the STR works, it is generally more convenient to use the s2ram
+tool available from http://suspend.sf.net and documented at
+http://en.opensuse.org/SDB:Suspend_to_RAM (S2RAM_LINK).
+
+Namely, after writing "freezer", "devices", "platform", "processors", or "core"
+into /sys/power/pm_test (available if the kernel is compiled with
+CONFIG_PM_DEBUG set) the suspend code will work in the test mode corresponding
+to given string.  The STR test modes are defined in the same way as for
+hibernation, so please refer to Section 1 for more information about them.  In
+particular, the "core" test allows you to test everything except for the actual
+invocation of the platform firmware in order to put the system into the sleep
+state.
+
+Among other things, the testing with the help of /sys/power/pm_test may allow
+you to identify drivers that fail to suspend or resume their devices.  They
+should be unloaded every time before an STR transition.
+
+Next, you can follow the instructions at S2RAM_LINK to test the system, but if
+it does not work "out of the box", you may need to boot it with
+"init=/bin/bash" and test s2ram in the minimal configuration.  In that case,
+you may be able to search for failing drivers by following the procedure
+analogous to the one described in section 1.  If you find some failing drivers,
+you will have to unload them every time before an STR transition (ie. before
+you run s2ram), and please report the problems with them.
+
+There is a debugfs entry which shows the suspend to RAM statistics. Here is an
+example of its output::
+
+	# mount -t debugfs none /sys/kernel/debug
+	# cat /sys/kernel/debug/suspend_stats
+	success: 20
+	fail: 5
+	failed_freeze: 0
+	failed_prepare: 0
+	failed_suspend: 5
+	failed_suspend_noirq: 0
+	failed_resume: 0
+	failed_resume_noirq: 0
+	failures:
+	  last_failed_dev:	alarm
+				adc
+	  last_failed_errno:	-16
+				-16
+	  last_failed_step:	suspend
+				suspend
+
+Field success means the success number of suspend to RAM, and field fail means
+the failure number. Others are the failure number of different steps of suspend
+to RAM. suspend_stats just lists the last 2 failed devices, error number and
+failed step of suspend.
diff --git a/Documentation/power/charger-manager.rst b/Documentation/power/charger-manager.rst
new file mode 100644
index 000000000..84fab9376
--- /dev/null
+++ b/Documentation/power/charger-manager.rst
@@ -0,0 +1,205 @@
+===============
+Charger Manager
+===============
+
+	(C) 2011 MyungJoo Ham <myungjoo.ham@samsung.com>, GPL
+
+Charger Manager provides in-kernel battery charger management that
+requires temperature monitoring during suspend-to-RAM state
+and where each battery may have multiple chargers attached and the userland
+wants to look at the aggregated information of the multiple chargers.
+
+Charger Manager is a platform_driver with power-supply-class entries.
+An instance of Charger Manager (a platform-device created with Charger-Manager)
+represents an independent battery with chargers. If there are multiple
+batteries with their own chargers acting independently in a system,
+the system may need multiple instances of Charger Manager.
+
+1. Introduction
+===============
+
+Charger Manager supports the following:
+
+* Support for multiple chargers (e.g., a device with USB, AC, and solar panels)
+	A system may have multiple chargers (or power sources) and some of
+	they may be activated at the same time. Each charger may have its
+	own power-supply-class and each power-supply-class can provide
+	different information about the battery status. This framework
+	aggregates charger-related information from multiple sources and
+	shows combined information as a single power-supply-class.
+
+* Support for in suspend-to-RAM polling (with suspend_again callback)
+	While the battery is being charged and the system is in suspend-to-RAM,
+	we may need to monitor the battery health by looking at the ambient or
+	battery temperature. We can accomplish this by waking up the system
+	periodically. However, such a method wakes up devices unnecessarily for
+	monitoring the battery health and tasks, and user processes that are
+	supposed to be kept suspended. That, in turn, incurs unnecessary power
+	consumption and slow down charging process. Or even, such peak power
+	consumption can stop chargers in the middle of charging
+	(external power input < device power consumption), which not
+	only affects the charging time, but the lifespan of the battery.
+
+	Charger Manager provides a function "cm_suspend_again" that can be
+	used as suspend_again callback of platform_suspend_ops. If the platform
+	requires tasks other than cm_suspend_again, it may implement its own
+	suspend_again callback that calls cm_suspend_again in the middle.
+	Normally, the platform will need to resume and suspend some devices
+	that are used by Charger Manager.
+
+* Support for premature full-battery event handling
+	If the battery voltage drops by "fullbatt_vchkdrop_uV" after
+	"fullbatt_vchkdrop_ms" from the full-battery event, the framework
+	restarts charging. This check is also performed while suspended by
+	setting wakeup time accordingly and using suspend_again.
+
+* Support for uevent-notify
+	With the charger-related events, the device sends
+	notification to users with UEVENT.
+
+2. Global Charger-Manager Data related with suspend_again
+=========================================================
+In order to setup Charger Manager with suspend-again feature
+(in-suspend monitoring), the user should provide charger_global_desc
+with setup_charger_manager(`struct charger_global_desc *`).
+This charger_global_desc data for in-suspend monitoring is global
+as the name suggests. Thus, the user needs to provide only once even
+if there are multiple batteries. If there are multiple batteries, the
+multiple instances of Charger Manager share the same charger_global_desc
+and it will manage in-suspend monitoring for all instances of Charger Manager.
+
+The user needs to provide all the three entries to `struct charger_global_desc`
+properly in order to activate in-suspend monitoring:
+
+`char *rtc_name;`
+	The name of rtc (e.g., "rtc0") used to wakeup the system from
+	suspend for Charger Manager. The alarm interrupt (AIE) of the rtc
+	should be able to wake up the system from suspend. Charger Manager
+	saves and restores the alarm value and use the previously-defined
+	alarm if it is going to go off earlier than Charger Manager so that
+	Charger Manager does not interfere with previously-defined alarms.
+
+`bool (*rtc_only_wakeup)(void);`
+	This callback should let CM know whether
+	the wakeup-from-suspend is caused only by the alarm of "rtc" in the
+	same struct. If there is any other wakeup source triggered the
+	wakeup, it should return false. If the "rtc" is the only wakeup
+	reason, it should return true.
+
+`bool assume_timer_stops_in_suspend;`
+	if true, Charger Manager assumes that
+	the timer (CM uses jiffies as timer) stops during suspend. Then, CM
+	assumes that the suspend-duration is same as the alarm length.
+
+
+3. How to setup suspend_again
+=============================
+Charger Manager provides a function "extern bool cm_suspend_again(void)".
+When cm_suspend_again is called, it monitors every battery. The suspend_ops
+callback of the system's platform_suspend_ops can call cm_suspend_again
+function to know whether Charger Manager wants to suspend again or not.
+If there are no other devices or tasks that want to use suspend_again
+feature, the platform_suspend_ops may directly refer to cm_suspend_again
+for its suspend_again callback.
+
+The cm_suspend_again() returns true (meaning "I want to suspend again")
+if the system was woken up by Charger Manager and the polling
+(in-suspend monitoring) results in "normal".
+
+4. Charger-Manager Data (struct charger_desc)
+=============================================
+For each battery charged independently from other batteries (if a series of
+batteries are charged by a single charger, they are counted as one independent
+battery), an instance of Charger Manager is attached to it. The following
+
+struct charger_desc elements:
+
+`char *psy_name;`
+	The power-supply-class name of the battery. Default is
+	"battery" if psy_name is NULL. Users can access the psy entries
+	at "/sys/class/power_supply/[psy_name]/".
+
+`enum polling_modes polling_mode;`
+	  CM_POLL_DISABLE:
+		do not poll this battery.
+	  CM_POLL_ALWAYS:
+		always poll this battery.
+	  CM_POLL_EXTERNAL_POWER_ONLY:
+		poll this battery if and only if an external power
+		source is attached.
+	  CM_POLL_CHARGING_ONLY:
+		poll this battery if and only if the battery is being charged.
+
+`unsigned int fullbatt_vchkdrop_ms; / unsigned int fullbatt_vchkdrop_uV;`
+	If both have non-zero values, Charger Manager will check the
+	battery voltage drop fullbatt_vchkdrop_ms after the battery is fully
+	charged. If the voltage drop is over fullbatt_vchkdrop_uV, Charger
+	Manager will try to recharge the battery by disabling and enabling
+	chargers. Recharge with voltage drop condition only (without delay
+	condition) is needed to be implemented with hardware interrupts from
+	fuel gauges or charger devices/chips.
+
+`unsigned int fullbatt_uV;`
+	If specified with a non-zero value, Charger Manager assumes
+	that the battery is full (capacity = 100) if the battery is not being
+	charged and the battery voltage is equal to or greater than
+	fullbatt_uV.
+
+`unsigned int polling_interval_ms;`
+	Required polling interval in ms. Charger Manager will poll
+	this battery every polling_interval_ms or more frequently.
+
+`enum data_source battery_present;`
+	CM_BATTERY_PRESENT:
+		assume that the battery exists.
+	CM_NO_BATTERY:
+		assume that the battery does not exists.
+	CM_FUEL_GAUGE:
+		get battery presence information from fuel gauge.
+	CM_CHARGER_STAT:
+		get battery presence from chargers.
+
+`char **psy_charger_stat;`
+	An array ending with NULL that has power-supply-class names of
+	chargers. Each power-supply-class should provide "PRESENT" (if
+	battery_present is "CM_CHARGER_STAT"), "ONLINE" (shows whether an
+	external power source is attached or not), and "STATUS" (shows whether
+	the battery is {"FULL" or not FULL} or {"FULL", "Charging",
+	"Discharging", "NotCharging"}).
+
+`int num_charger_regulators; / struct regulator_bulk_data *charger_regulators;`
+	Regulators representing the chargers in the form for
+	regulator framework's bulk functions.
+
+`char *psy_fuel_gauge;`
+	Power-supply-class name of the fuel gauge.
+
+`int (*temperature_out_of_range)(int *mC); / bool measure_battery_temp;`
+	This callback returns 0 if the temperature is safe for charging,
+	a positive number if it is too hot to charge, and a negative number
+	if it is too cold to charge. With the variable mC, the callback returns
+	the temperature in 1/1000 of centigrade.
+	The source of temperature can be battery or ambient one according to
+	the value of measure_battery_temp.
+
+
+5. Notify Charger-Manager of charger events: cm_notify_event()
+==============================================================
+If there is an charger event is required to notify
+Charger Manager, a charger device driver that triggers the event can call
+cm_notify_event(psy, type, msg) to notify the corresponding Charger Manager.
+In the function, psy is the charger driver's power_supply pointer, which is
+associated with Charger-Manager. The parameter "type"
+is the same as irq's type (enum cm_event_types). The event message "msg" is
+optional and is effective only if the event type is "UNDESCRIBED" or "OTHERS".
+
+6. Other Considerations
+=======================
+
+At the charger/battery-related events such as battery-pulled-out,
+charger-pulled-out, charger-inserted, DCIN-over/under-voltage, charger-stopped,
+and others critical to chargers, the system should be configured to wake up.
+At least the following should wake up the system from a suspend:
+a) charger-on/off b) external-power-in/out c) battery-in/out (while charging)
+
+It is usually accomplished by configuring the PMIC as a wakeup source.
diff --git a/Documentation/power/drivers-testing.rst b/Documentation/power/drivers-testing.rst
new file mode 100644
index 000000000..d77d2894f
--- /dev/null
+++ b/Documentation/power/drivers-testing.rst
@@ -0,0 +1,52 @@
+====================================================
+Testing suspend and resume support in device drivers
+====================================================
+
+	(C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
+
+1. Preparing the test system
+============================
+
+Unfortunately, to effectively test the support for the system-wide suspend and
+resume transitions in a driver, it is necessary to suspend and resume a fully
+functional system with this driver loaded.  Moreover, that should be done
+several times, preferably several times in a row, and separately for hibernation
+(aka suspend to disk or STD) and suspend to RAM (STR), because each of these
+cases involves slightly different operations and different interactions with
+the machine's BIOS.
+
+Of course, for this purpose the test system has to be known to suspend and
+resume without the driver being tested.  Thus, if possible, you should first
+resolve all suspend/resume-related problems in the test system before you start
+testing the new driver.  Please see Documentation/power/basic-pm-debugging.rst
+for more information about the debugging of suspend/resume functionality.
+
+2. Testing the driver
+=====================
+
+Once you have resolved the suspend/resume-related problems with your test system
+without the new driver, you are ready to test it:
+
+a) Build the driver as a module, load it and try the test modes of hibernation
+   (see: Documentation/power/basic-pm-debugging.rst, 1).
+
+b) Load the driver and attempt to hibernate in the "reboot", "shutdown" and
+   "platform" modes (see: Documentation/power/basic-pm-debugging.rst, 1).
+
+c) Compile the driver directly into the kernel and try the test modes of
+   hibernation.
+
+d) Attempt to hibernate with the driver compiled directly into the kernel
+   in the "reboot", "shutdown" and "platform" modes.
+
+e) Try the test modes of suspend (see:
+   Documentation/power/basic-pm-debugging.rst, 2).  [As far as the STR tests are
+   concerned, it should not matter whether or not the driver is built as a
+   module.]
+
+f) Attempt to suspend to RAM using the s2ram tool with the driver loaded
+   (see: Documentation/power/basic-pm-debugging.rst, 2).
+
+Each of the above tests should be repeated several times and the STD tests
+should be mixed with the STR tests.  If any of them fails, the driver cannot be
+regarded as suspend/resume-safe.
diff --git a/Documentation/power/energy-model.rst b/Documentation/power/energy-model.rst
new file mode 100644
index 000000000..ef341be28
--- /dev/null
+++ b/Documentation/power/energy-model.rst
@@ -0,0 +1,244 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+Energy Model of devices
+=======================
+
+1. Overview
+-----------
+
+The Energy Model (EM) framework serves as an interface between drivers knowing
+the power consumed by devices at various performance levels, and the kernel
+subsystems willing to use that information to make energy-aware decisions.
+
+The source of the information about the power consumed by devices can vary greatly
+from one platform to another. These power costs can be estimated using
+devicetree data in some cases. In others, the firmware will know better.
+Alternatively, userspace might be best positioned. And so on. In order to avoid
+each and every client subsystem to re-implement support for each and every
+possible source of information on its own, the EM framework intervenes as an
+abstraction layer which standardizes the format of power cost tables in the
+kernel, hence enabling to avoid redundant work.
+
+The power values might be expressed in micro-Watts or in an 'abstract scale'.
+Multiple subsystems might use the EM and it is up to the system integrator to
+check that the requirements for the power value scale types are met. An example
+can be found in the Energy-Aware Scheduler documentation
+Documentation/scheduler/sched-energy.rst. For some subsystems like thermal or
+powercap power values expressed in an 'abstract scale' might cause issues.
+These subsystems are more interested in estimation of power used in the past,
+thus the real micro-Watts might be needed. An example of these requirements can
+be found in the Intelligent Power Allocation in
+Documentation/driver-api/thermal/power_allocator.rst.
+Kernel subsystems might implement automatic detection to check whether EM
+registered devices have inconsistent scale (based on EM internal flag).
+Important thing to keep in mind is that when the power values are expressed in
+an 'abstract scale' deriving real energy in micro-Joules would not be possible.
+
+The figure below depicts an example of drivers (Arm-specific here, but the
+approach is applicable to any architecture) providing power costs to the EM
+framework, and interested clients reading the data from it::
+
+       +---------------+  +-----------------+  +---------------+
+       | Thermal (IPA) |  | Scheduler (EAS) |  |     Other     |
+       +---------------+  +-----------------+  +---------------+
+               |                   | em_cpu_energy()   |
+               |                   | em_cpu_get()      |
+               +---------+         |         +---------+
+                         |         |         |
+                         v         v         v
+                        +---------------------+
+                        |    Energy Model     |
+                        |     Framework       |
+                        +---------------------+
+                           ^       ^       ^
+                           |       |       | em_dev_register_perf_domain()
+                +----------+       |       +---------+
+                |                  |                 |
+        +---------------+  +---------------+  +--------------+
+        |  cpufreq-dt   |  |   arm_scmi    |  |    Other     |
+        +---------------+  +---------------+  +--------------+
+                ^                  ^                 ^
+                |                  |                 |
+        +--------------+   +---------------+  +--------------+
+        | Device Tree  |   |   Firmware    |  |      ?       |
+        +--------------+   +---------------+  +--------------+
+
+In case of CPU devices the EM framework manages power cost tables per
+'performance domain' in the system. A performance domain is a group of CPUs
+whose performance is scaled together. Performance domains generally have a
+1-to-1 mapping with CPUFreq policies. All CPUs in a performance domain are
+required to have the same micro-architecture. CPUs in different performance
+domains can have different micro-architectures.
+
+
+2. Core APIs
+------------
+
+2.1 Config options
+^^^^^^^^^^^^^^^^^^
+
+CONFIG_ENERGY_MODEL must be enabled to use the EM framework.
+
+
+2.2 Registration of performance domains
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Registration of 'advanced' EM
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The 'advanced' EM gets it's name due to the fact that the driver is allowed
+to provide more precised power model. It's not limited to some implemented math
+formula in the framework (like it's in 'simple' EM case). It can better reflect
+the real power measurements performed for each performance state. Thus, this
+registration method should be preferred in case considering EM static power
+(leakage) is important.
+
+Drivers are expected to register performance domains into the EM framework by
+calling the following API::
+
+  int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
+		struct em_data_callback *cb, cpumask_t *cpus, bool microwatts);
+
+Drivers must provide a callback function returning <frequency, power> tuples
+for each performance state. The callback function provided by the driver is free
+to fetch data from any relevant location (DT, firmware, ...), and by any mean
+deemed necessary. Only for CPU devices, drivers must specify the CPUs of the
+performance domains using cpumask. For other devices than CPUs the last
+argument must be set to NULL.
+The last argument 'microwatts' is important to set with correct value. Kernel
+subsystems which use EM might rely on this flag to check if all EM devices use
+the same scale. If there are different scales, these subsystems might decide
+to return warning/error, stop working or panic.
+See Section 3. for an example of driver implementing this
+callback, or Section 2.4 for further documentation on this API
+
+Registration of EM using DT
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The  EM can also be registered using OPP framework and information in DT
+"operating-points-v2". Each OPP entry in DT can be extended with a property
+"opp-microwatt" containing micro-Watts power value. This OPP DT property
+allows a platform to register EM power values which are reflecting total power
+(static + dynamic). These power values might be coming directly from
+experiments and measurements.
+
+Registration of 'artificial' EM
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There is an option to provide a custom callback for drivers missing detailed
+knowledge about power value for each performance state. The callback
+.get_cost() is optional and provides the 'cost' values used by the EAS.
+This is useful for platforms that only provide information on relative
+efficiency between CPU types, where one could use the information to
+create an abstract power model. But even an abstract power model can
+sometimes be hard to fit in, given the input power value size restrictions.
+The .get_cost() allows to provide the 'cost' values which reflect the
+efficiency of the CPUs. This would allow to provide EAS information which
+has different relation than what would be forced by the EM internal
+formulas calculating 'cost' values. To register an EM for such platform, the
+driver must set the flag 'microwatts' to 0, provide .get_power() callback
+and provide .get_cost() callback. The EM framework would handle such platform
+properly during registration. A flag EM_PERF_DOMAIN_ARTIFICIAL is set for such
+platform. Special care should be taken by other frameworks which are using EM
+to test and treat this flag properly.
+
+Registration of 'simple' EM
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The 'simple' EM is registered using the framework helper function
+cpufreq_register_em_with_opp(). It implements a power model which is tight to
+math formula::
+
+	Power = C * V^2 * f
+
+The EM which is registered using this method might not reflect correctly the
+physics of a real device, e.g. when static power (leakage) is important.
+
+
+2.3 Accessing performance domains
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+There are two API functions which provide the access to the energy model:
+em_cpu_get() which takes CPU id as an argument and em_pd_get() with device
+pointer as an argument. It depends on the subsystem which interface it is
+going to use, but in case of CPU devices both functions return the same
+performance domain.
+
+Subsystems interested in the energy model of a CPU can retrieve it using the
+em_cpu_get() API. The energy model tables are allocated once upon creation of
+the performance domains, and kept in memory untouched.
+
+The energy consumed by a performance domain can be estimated using the
+em_cpu_energy() API. The estimation is performed assuming that the schedutil
+CPUfreq governor is in use in case of CPU device. Currently this calculation is
+not provided for other type of devices.
+
+More details about the above APIs can be found in ``<linux/energy_model.h>``
+or in Section 2.4
+
+
+2.4 Description details of this API
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+.. kernel-doc:: include/linux/energy_model.h
+   :internal:
+
+.. kernel-doc:: kernel/power/energy_model.c
+   :export:
+
+
+3. Example driver
+-----------------
+
+The CPUFreq framework supports dedicated callback for registering
+the EM for a given CPU(s) 'policy' object: cpufreq_driver::register_em().
+That callback has to be implemented properly for a given driver,
+because the framework would call it at the right time during setup.
+This section provides a simple example of a CPUFreq driver registering a
+performance domain in the Energy Model framework using the (fake) 'foo'
+protocol. The driver implements an est_power() function to be provided to the
+EM framework::
+
+  -> drivers/cpufreq/foo_cpufreq.c
+
+  01	static int est_power(struct device *dev, unsigned long *mW,
+  02			unsigned long *KHz)
+  03	{
+  04		long freq, power;
+  05
+  06		/* Use the 'foo' protocol to ceil the frequency */
+  07		freq = foo_get_freq_ceil(dev, *KHz);
+  08		if (freq < 0);
+  09			return freq;
+  10
+  11		/* Estimate the power cost for the dev at the relevant freq. */
+  12		power = foo_estimate_power(dev, freq);
+  13		if (power < 0);
+  14			return power;
+  15
+  16		/* Return the values to the EM framework */
+  17		*mW = power;
+  18		*KHz = freq;
+  19
+  20		return 0;
+  21	}
+  22
+  23	static void foo_cpufreq_register_em(struct cpufreq_policy *policy)
+  24	{
+  25		struct em_data_callback em_cb = EM_DATA_CB(est_power);
+  26		struct device *cpu_dev;
+  27		int nr_opp;
+  28
+  29		cpu_dev = get_cpu_device(cpumask_first(policy->cpus));
+  30
+  31     	/* Find the number of OPPs for this policy */
+  32     	nr_opp = foo_get_nr_opp(policy);
+  33
+  34     	/* And register the new performance domain */
+  35     	em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus,
+  36					    true);
+  37	}
+  38
+  39	static struct cpufreq_driver foo_cpufreq_driver = {
+  40		.register_em = foo_cpufreq_register_em,
+  41	};
diff --git a/Documentation/power/freezing-of-tasks.rst b/Documentation/power/freezing-of-tasks.rst
new file mode 100644
index 000000000..53b6a56c4
--- /dev/null
+++ b/Documentation/power/freezing-of-tasks.rst
@@ -0,0 +1,245 @@
+=================
+Freezing of tasks
+=================
+
+(C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL
+
+I. What is the freezing of tasks?
+=================================
+
+The freezing of tasks is a mechanism by which user space processes and some
+kernel threads are controlled during hibernation or system-wide suspend (on some
+architectures).
+
+II. How does it work?
+=====================
+
+There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
+and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
+PF_NOFREEZE unset (all user space processes and some kernel threads) are
+regarded as 'freezable' and treated in a special way before the system enters a
+suspend state as well as before a hibernation image is created (in what follows
+we only consider hibernation, but the description also applies to suspend).
+
+Namely, as the first step of the hibernation procedure the function
+freeze_processes() (defined in kernel/power/process.c) is called.  A system-wide
+variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate
+whether the system is to undergo a freezing operation. And freeze_processes()
+sets this variable.  After this, it executes try_to_freeze_tasks() that sends a
+fake signal to all user space processes, and wakes up all the kernel threads.
+All freezable tasks must react to that by calling try_to_freeze(), which
+results in a call to __refrigerator() (defined in kernel/freezer.c), which sets
+the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes
+it loop until PF_FROZEN is cleared for it. Then, we say that the task is
+'frozen' and therefore the set of functions handling this mechanism is referred
+to as 'the freezer' (these functions are defined in kernel/power/process.c,
+kernel/freezer.c & include/linux/freezer.h). User space processes are generally
+frozen before kernel threads.
+
+__refrigerator() must not be called directly.  Instead, use the
+try_to_freeze() function (defined in include/linux/freezer.h), that checks
+if the task is to be frozen and makes the task enter __refrigerator().
+
+For user space processes try_to_freeze() is called automatically from the
+signal-handling code, but the freezable kernel threads need to call it
+explicitly in suitable places or use the wait_event_freezable() or
+wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
+that combine interruptible sleep with checking if the task is to be frozen and
+calling try_to_freeze().  The main loop of a freezable kernel thread may look
+like the following one::
+
+	set_freezable();
+	do {
+		hub_events();
+		wait_event_freezable(khubd_wait,
+				!list_empty(&hub_event_list) ||
+				kthread_should_stop());
+	} while (!kthread_should_stop() || !list_empty(&hub_event_list));
+
+(from drivers/usb/core/hub.c::hub_thread()).
+
+If a freezable kernel thread fails to call try_to_freeze() after the freezer has
+initiated a freezing operation, the freezing of tasks will fail and the entire
+hibernation operation will be cancelled.  For this reason, freezable kernel
+threads must call try_to_freeze() somewhere or use one of the
+wait_event_freezable() and wait_event_freezable_timeout() macros.
+
+After the system memory state has been restored from a hibernation image and
+devices have been reinitialized, the function thaw_processes() is called in
+order to clear the PF_FROZEN flag for each frozen task.  Then, the tasks that
+have been frozen leave __refrigerator() and continue running.
+
+
+Rationale behind the functions dealing with freezing and thawing of tasks
+-------------------------------------------------------------------------
+
+freeze_processes():
+  - freezes only userspace tasks
+
+freeze_kernel_threads():
+  - freezes all tasks (including kernel threads) because we can't freeze
+    kernel threads without freezing userspace tasks
+
+thaw_kernel_threads():
+  - thaws only kernel threads; this is particularly useful if we need to do
+    anything special in between thawing of kernel threads and thawing of
+    userspace tasks, or if we want to postpone the thawing of userspace tasks
+
+thaw_processes():
+  - thaws all tasks (including kernel threads) because we can't thaw userspace
+    tasks without thawing kernel threads
+
+
+III. Which kernel threads are freezable?
+========================================
+
+Kernel threads are not freezable by default.  However, a kernel thread may clear
+PF_NOFREEZE for itself by calling set_freezable() (the resetting of PF_NOFREEZE
+directly is not allowed).  From this point it is regarded as freezable
+and must call try_to_freeze() in a suitable place.
+
+IV. Why do we do that?
+======================
+
+Generally speaking, there is a couple of reasons to use the freezing of tasks:
+
+1. The principal reason is to prevent filesystems from being damaged after
+   hibernation.  At the moment we have no simple means of checkpointing
+   filesystems, so if there are any modifications made to filesystem data and/or
+   metadata on disks, we cannot bring them back to the state from before the
+   modifications.  At the same time each hibernation image contains some
+   filesystem-related information that must be consistent with the state of the
+   on-disk data and metadata after the system memory state has been restored
+   from the image (otherwise the filesystems will be damaged in a nasty way,
+   usually making them almost impossible to repair).  We therefore freeze
+   tasks that might cause the on-disk filesystems' data and metadata to be
+   modified after the hibernation image has been created and before the
+   system is finally powered off. The majority of these are user space
+   processes, but if any of the kernel threads may cause something like this
+   to happen, they have to be freezable.
+
+2. Next, to create the hibernation image we need to free a sufficient amount of
+   memory (approximately 50% of available RAM) and we need to do that before
+   devices are deactivated, because we generally need them for swapping out.
+   Then, after the memory for the image has been freed, we don't want tasks
+   to allocate additional memory and we prevent them from doing that by
+   freezing them earlier. [Of course, this also means that device drivers
+   should not allocate substantial amounts of memory from their .suspend()
+   callbacks before hibernation, but this is a separate issue.]
+
+3. The third reason is to prevent user space processes and some kernel threads
+   from interfering with the suspending and resuming of devices.  A user space
+   process running on a second CPU while we are suspending devices may, for
+   example, be troublesome and without the freezing of tasks we would need some
+   safeguards against race conditions that might occur in such a case.
+
+Although Linus Torvalds doesn't like the freezing of tasks, he said this in one
+of the discussions on LKML (https://lore.kernel.org/r/alpine.LFD.0.98.0704271801020.9964@woody.linux-foundation.org):
+
+"RJW:> Why we freeze tasks at all or why we freeze kernel threads?
+
+Linus: In many ways, 'at all'.
+
+I **do** realize the IO request queue issues, and that we cannot actually do
+s2ram with some devices in the middle of a DMA.  So we want to be able to
+avoid *that*, there's no question about that.  And I suspect that stopping
+user threads and then waiting for a sync is practically one of the easier
+ways to do so.
+
+So in practice, the 'at all' may become a 'why freeze kernel threads?' and
+freezing user threads I don't find really objectionable."
+
+Still, there are kernel threads that may want to be freezable.  For example, if
+a kernel thread that belongs to a device driver accesses the device directly, it
+in principle needs to know when the device is suspended, so that it doesn't try
+to access it at that time.  However, if the kernel thread is freezable, it will
+be frozen before the driver's .suspend() callback is executed and it will be
+thawed after the driver's .resume() callback has run, so it won't be accessing
+the device while it's suspended.
+
+4. Another reason for freezing tasks is to prevent user space processes from
+   realizing that hibernation (or suspend) operation takes place.  Ideally, user
+   space processes should not notice that such a system-wide operation has
+   occurred and should continue running without any problems after the restore
+   (or resume from suspend).  Unfortunately, in the most general case this
+   is quite difficult to achieve without the freezing of tasks.  Consider,
+   for example, a process that depends on all CPUs being online while it's
+   running.  Since we need to disable nonboot CPUs during the hibernation,
+   if this process is not frozen, it may notice that the number of CPUs has
+   changed and may start to work incorrectly because of that.
+
+V. Are there any problems related to the freezing of tasks?
+===========================================================
+
+Yes, there are.
+
+First of all, the freezing of kernel threads may be tricky if they depend one
+on another.  For example, if kernel thread A waits for a completion (in the
+TASK_UNINTERRUPTIBLE state) that needs to be done by freezable kernel thread B
+and B is frozen in the meantime, then A will be blocked until B is thawed, which
+may be undesirable.  That's why kernel threads are not freezable by default.
+
+Second, there are the following two problems related to the freezing of user
+space processes:
+
+1. Putting processes into an uninterruptible sleep distorts the load average.
+2. Now that we have FUSE, plus the framework for doing device drivers in
+   userspace, it gets even more complicated because some userspace processes are
+   now doing the sorts of things that kernel threads do
+   (https://lists.linux-foundation.org/pipermail/linux-pm/2007-May/012309.html).
+
+The problem 1. seems to be fixable, although it hasn't been fixed so far.  The
+other one is more serious, but it seems that we can work around it by using
+hibernation (and suspend) notifiers (in that case, though, we won't be able to
+avoid the realization by the user space processes that the hibernation is taking
+place).
+
+There are also problems that the freezing of tasks tends to expose, although
+they are not directly related to it.  For example, if request_firmware() is
+called from a device driver's .resume() routine, it will timeout and eventually
+fail, because the user land process that should respond to the request is frozen
+at this point.  So, seemingly, the failure is due to the freezing of tasks.
+Suppose, however, that the firmware file is located on a filesystem accessible
+only through another device that hasn't been resumed yet.  In that case,
+request_firmware() will fail regardless of whether or not the freezing of tasks
+is used.  Consequently, the problem is not really related to the freezing of
+tasks, since it generally exists anyway.
+
+A driver must have all firmwares it may need in RAM before suspend() is called.
+If keeping them is not practical, for example due to their size, they must be
+requested early enough using the suspend notifier API described in
+Documentation/driver-api/pm/notifiers.rst.
+
+VI. Are there any precautions to be taken to prevent freezing failures?
+=======================================================================
+
+Yes, there are.
+
+First of all, grabbing the 'system_transition_mutex' lock to mutually exclude a
+piece of code from system-wide sleep such as suspend/hibernation is not
+encouraged.  If possible, that piece of code must instead hook onto the
+suspend/hibernation notifiers to achieve mutual exclusion. Look at the
+CPU-Hotplug code (kernel/cpu.c) for an example.
+
+However, if that is not feasible, and grabbing 'system_transition_mutex' is
+deemed necessary, it is strongly discouraged to directly call
+mutex_[un]lock(&system_transition_mutex) since that could lead to freezing
+failures, because if the suspend/hibernate code successfully acquired the
+'system_transition_mutex' lock, and hence that other entity failed to acquire
+the lock, then that task would get blocked in TASK_UNINTERRUPTIBLE state. As a
+consequence, the freezer would not be able to freeze that task, leading to
+freezing failure.
+
+However, the [un]lock_system_sleep() APIs are safe to use in this scenario,
+since they ask the freezer to skip freezing this task, since it is anyway
+"frozen enough" as it is blocked on 'system_transition_mutex', which will be
+released only after the entire suspend/hibernation sequence is complete.  So, to
+summarize, use [un]lock_system_sleep() instead of directly using
+mutex_[un]lock(&system_transition_mutex). That would prevent freezing failures.
+
+V. Miscellaneous
+================
+
+/sys/power/pm_freeze_timeout controls how long it will cost at most to freeze
+all user space processes or all freezable kernel threads, in unit of
+millisecond.  The default value is 20000, with range of unsigned integer.
diff --git a/Documentation/power/index.rst b/Documentation/power/index.rst
new file mode 100644
index 000000000..a0f5244fb
--- /dev/null
+++ b/Documentation/power/index.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+Power Management
+================
+
+.. toctree::
+    :maxdepth: 1
+
+    apm-acpi
+    basic-pm-debugging
+    charger-manager
+    drivers-testing
+    energy-model
+    freezing-of-tasks
+    opp
+    pci
+    pm_qos_interface
+    power_supply_class
+    runtime_pm
+    s2ram
+    suspend-and-cpuhotplug
+    suspend-and-interrupts
+    swsusp-and-swap-files
+    swsusp-dmcrypt
+    swsusp
+    video
+    tricks
+
+    userland-swsusp
+
+    powercap/powercap
+    powercap/dtpm
+
+    regulator/consumer
+    regulator/design
+    regulator/machine
+    regulator/overview
+    regulator/regulator
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/power/opp.rst b/Documentation/power/opp.rst
new file mode 100644
index 000000000..a7c03c470
--- /dev/null
+++ b/Documentation/power/opp.rst
@@ -0,0 +1,381 @@
+==========================================
+Operating Performance Points (OPP) Library
+==========================================
+
+(C) 2009-2010 Nishanth Menon <nm@ti.com>, Texas Instruments Incorporated
+
+.. Contents
+
+  1. Introduction
+  2. Initial OPP List Registration
+  3. OPP Search Functions
+  4. OPP Availability Control Functions
+  5. OPP Data Retrieval Functions
+  6. Data Structures
+
+1. Introduction
+===============
+
+1.1 What is an Operating Performance Point (OPP)?
+-------------------------------------------------
+
+Complex SoCs of today consists of a multiple sub-modules working in conjunction.
+In an operational system executing varied use cases, not all modules in the SoC
+need to function at their highest performing frequency all the time. To
+facilitate this, sub-modules in a SoC are grouped into domains, allowing some
+domains to run at lower voltage and frequency while other domains run at
+voltage/frequency pairs that are higher.
+
+The set of discrete tuples consisting of frequency and voltage pairs that
+the device will support per domain are called Operating Performance Points or
+OPPs.
+
+As an example:
+
+Let us consider an MPU device which supports the following:
+{300MHz at minimum voltage of 1V}, {800MHz at minimum voltage of 1.2V},
+{1GHz at minimum voltage of 1.3V}
+
+We can represent these as three OPPs as the following {Hz, uV} tuples:
+
+- {300000000, 1000000}
+- {800000000, 1200000}
+- {1000000000, 1300000}
+
+1.2 Operating Performance Points Library
+----------------------------------------
+
+OPP library provides a set of helper functions to organize and query the OPP
+information. The library is located in drivers/opp/ directory and the header
+is located in include/linux/pm_opp.h. OPP library can be enabled by enabling
+CONFIG_PM_OPP from power management menuconfig menu. Certain SoCs such as Texas
+Instrument's OMAP framework allows to optionally boot at a certain OPP without
+needing cpufreq.
+
+Typical usage of the OPP library is as follows::
+
+ (users)	-> registers a set of default OPPs		-> (library)
+ SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
+		-> queries to search/retrieve information	->
+
+OPP layer expects each domain to be represented by a unique device pointer. SoC
+framework registers a set of initial OPPs per device with the OPP layer. This
+list is expected to be an optimally small number typically around 5 per device.
+This initial list contains a set of OPPs that the framework expects to be safely
+enabled by default in the system.
+
+Note on OPP Availability
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+As the system proceeds to operate, SoC framework may choose to make certain
+OPPs available or not available on each device based on various external
+factors. Example usage: Thermal management or other exceptional situations where
+SoC framework might choose to disable a higher frequency OPP to safely continue
+operations until that OPP could be re-enabled if possible.
+
+OPP library facilitates this concept in its implementation. The following
+operational functions operate only on available opps:
+dev_pm_opp_find_freq_{ceil, floor}, dev_pm_opp_get_voltage, dev_pm_opp_get_freq,
+dev_pm_opp_get_opp_count.
+
+dev_pm_opp_find_freq_exact is meant to be used to find the opp pointer
+which can then be used for dev_pm_opp_enable/disable functions to make an
+opp available as required.
+
+WARNING: Users of OPP library should refresh their availability count using
+get_opp_count if dev_pm_opp_enable/disable functions are invoked for a
+device, the exact mechanism to trigger these or the notification mechanism
+to other dependent subsystems such as cpufreq are left to the discretion of
+the SoC specific framework which uses the OPP library. Similar care needs
+to be taken care to refresh the cpufreq table in cases of these operations.
+
+2. Initial OPP List Registration
+================================
+The SoC implementation calls dev_pm_opp_add function iteratively to add OPPs per
+device. It is expected that the SoC framework will register the OPP entries
+optimally- typical numbers range to be less than 5. The list generated by
+registering the OPPs is maintained by OPP library throughout the device
+operation. The SoC framework can subsequently control the availability of the
+OPPs dynamically using the dev_pm_opp_enable / disable functions.
+
+dev_pm_opp_add
+	Add a new OPP for a specific domain represented by the device pointer.
+	The OPP is defined using the frequency and voltage. Once added, the OPP
+	is assumed to be available and control of its availability can be done
+	with the dev_pm_opp_enable/disable functions. OPP library
+	internally stores and manages this information in the dev_pm_opp struct.
+	This function may be used by SoC framework to define a optimal list
+	as per the demands of SoC usage environment.
+
+	WARNING:
+		Do not use this function in interrupt context.
+
+	Example::
+
+	 soc_pm_init()
+	 {
+		/* Do things */
+		r = dev_pm_opp_add(mpu_dev, 1000000, 900000);
+		if (!r) {
+			pr_err("%s: unable to register mpu opp(%d)\n", r);
+			goto no_cpufreq;
+		}
+		/* Do cpufreq things */
+	 no_cpufreq:
+		/* Do remaining things */
+	 }
+
+3. OPP Search Functions
+=======================
+High level framework such as cpufreq operates on frequencies. To map the
+frequency back to the corresponding OPP, OPP library provides handy functions
+to search the OPP list that OPP library internally manages. These search
+functions return the matching pointer representing the opp if a match is
+found, else returns error. These errors are expected to be handled by standard
+error checks such as IS_ERR() and appropriate actions taken by the caller.
+
+Callers of these functions shall call dev_pm_opp_put() after they have used the
+OPP. Otherwise the memory for the OPP will never get freed and result in
+memleak.
+
+dev_pm_opp_find_freq_exact
+	Search for an OPP based on an *exact* frequency and
+	availability. This function is especially useful to enable an OPP which
+	is not available by default.
+	Example: In a case when SoC framework detects a situation where a
+	higher frequency could be made available, it can use this function to
+	find the OPP prior to call the dev_pm_opp_enable to actually make
+	it available::
+
+	 opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false);
+	 dev_pm_opp_put(opp);
+	 /* dont operate on the pointer.. just do a sanity check.. */
+	 if (IS_ERR(opp)) {
+		pr_err("frequency not disabled!\n");
+		/* trigger appropriate actions.. */
+	 } else {
+		dev_pm_opp_enable(dev,1000000000);
+	 }
+
+	NOTE:
+	  This is the only search function that operates on OPPs which are
+	  not available.
+
+dev_pm_opp_find_freq_floor
+	Search for an available OPP which is *at most* the
+	provided frequency. This function is useful while searching for a lesser
+	match OR operating on OPP information in the order of decreasing
+	frequency.
+	Example: To find the highest opp for a device::
+
+	 freq = ULONG_MAX;
+	 opp = dev_pm_opp_find_freq_floor(dev, &freq);
+	 dev_pm_opp_put(opp);
+
+dev_pm_opp_find_freq_ceil
+	Search for an available OPP which is *at least* the
+	provided frequency. This function is useful while searching for a
+	higher match OR operating on OPP information in the order of increasing
+	frequency.
+	Example 1: To find the lowest opp for a device::
+
+	 freq = 0;
+	 opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+	 dev_pm_opp_put(opp);
+
+	Example 2: A simplified implementation of a SoC cpufreq_driver->target::
+
+	 soc_cpufreq_target(..)
+	 {
+		/* Do stuff like policy checks etc. */
+		/* Find the best frequency match for the req */
+		opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+		dev_pm_opp_put(opp);
+		if (!IS_ERR(opp))
+			soc_switch_to_freq_voltage(freq);
+		else
+			/* do something when we can't satisfy the req */
+		/* do other stuff */
+	 }
+
+4. OPP Availability Control Functions
+=====================================
+A default OPP list registered with the OPP library may not cater to all possible
+situation. The OPP library provides a set of functions to modify the
+availability of a OPP within the OPP list. This allows SoC frameworks to have
+fine grained dynamic control of which sets of OPPs are operationally available.
+These functions are intended to *temporarily* remove an OPP in conditions such
+as thermal considerations (e.g. don't use OPPx until the temperature drops).
+
+WARNING:
+	Do not use these functions in interrupt context.
+
+dev_pm_opp_enable
+	Make a OPP available for operation.
+	Example: Lets say that 1GHz OPP is to be made available only if the
+	SoC temperature is lower than a certain threshold. The SoC framework
+	implementation might choose to do something as follows::
+
+	 if (cur_temp < temp_low_thresh) {
+		/* Enable 1GHz if it was disabled */
+		opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false);
+		dev_pm_opp_put(opp);
+		/* just error check */
+		if (!IS_ERR(opp))
+			ret = dev_pm_opp_enable(dev, 1000000000);
+		else
+			goto try_something_else;
+	 }
+
+dev_pm_opp_disable
+	Make an OPP to be not available for operation
+	Example: Lets say that 1GHz OPP is to be disabled if the temperature
+	exceeds a threshold value. The SoC framework implementation might
+	choose to do something as follows::
+
+	 if (cur_temp > temp_high_thresh) {
+		/* Disable 1GHz if it was enabled */
+		opp = dev_pm_opp_find_freq_exact(dev, 1000000000, true);
+		dev_pm_opp_put(opp);
+		/* just error check */
+		if (!IS_ERR(opp))
+			ret = dev_pm_opp_disable(dev, 1000000000);
+		else
+			goto try_something_else;
+	 }
+
+5. OPP Data Retrieval Functions
+===============================
+Since OPP library abstracts away the OPP information, a set of functions to pull
+information from the dev_pm_opp structure is necessary. Once an OPP pointer is
+retrieved using the search functions, the following functions can be used by SoC
+framework to retrieve the information represented inside the OPP layer.
+
+dev_pm_opp_get_voltage
+	Retrieve the voltage represented by the opp pointer.
+	Example: At a cpufreq transition to a different frequency, SoC
+	framework requires to set the voltage represented by the OPP using
+	the regulator framework to the Power Management chip providing the
+	voltage::
+
+	 soc_switch_to_freq_voltage(freq)
+	 {
+		/* do things */
+		opp = dev_pm_opp_find_freq_ceil(dev, &freq);
+		v = dev_pm_opp_get_voltage(opp);
+		dev_pm_opp_put(opp);
+		if (v)
+			regulator_set_voltage(.., v);
+		/* do other things */
+	 }
+
+dev_pm_opp_get_freq
+	Retrieve the freq represented by the opp pointer.
+	Example: Lets say the SoC framework uses a couple of helper functions
+	we could pass opp pointers instead of doing additional parameters to
+	handle quiet a bit of data parameters::
+
+	 soc_cpufreq_target(..)
+	 {
+		/* do things.. */
+		 max_freq = ULONG_MAX;
+		 max_opp = dev_pm_opp_find_freq_floor(dev,&max_freq);
+		 requested_opp = dev_pm_opp_find_freq_ceil(dev,&freq);
+		 if (!IS_ERR(max_opp) && !IS_ERR(requested_opp))
+			r = soc_test_validity(max_opp, requested_opp);
+		 dev_pm_opp_put(max_opp);
+		 dev_pm_opp_put(requested_opp);
+		/* do other things */
+	 }
+	 soc_test_validity(..)
+	 {
+		 if(dev_pm_opp_get_voltage(max_opp) < dev_pm_opp_get_voltage(requested_opp))
+			 return -EINVAL;
+		 if(dev_pm_opp_get_freq(max_opp) < dev_pm_opp_get_freq(requested_opp))
+			 return -EINVAL;
+		/* do things.. */
+	 }
+
+dev_pm_opp_get_opp_count
+	Retrieve the number of available opps for a device
+	Example: Lets say a co-processor in the SoC needs to know the available
+	frequencies in a table, the main processor can notify as following::
+
+	 soc_notify_coproc_available_frequencies()
+	 {
+		/* Do things */
+		num_available = dev_pm_opp_get_opp_count(dev);
+		speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL);
+		/* populate the table in increasing order */
+		freq = 0;
+		while (!IS_ERR(opp = dev_pm_opp_find_freq_ceil(dev, &freq))) {
+			speeds[i] = freq;
+			freq++;
+			i++;
+			dev_pm_opp_put(opp);
+		}
+
+		soc_notify_coproc(AVAILABLE_FREQs, speeds, num_available);
+		/* Do other things */
+	 }
+
+6. Data Structures
+==================
+Typically an SoC contains multiple voltage domains which are variable. Each
+domain is represented by a device pointer. The relationship to OPP can be
+represented as follows::
+
+  SoC
+   |- device 1
+   |	|- opp 1 (availability, freq, voltage)
+   |	|- opp 2 ..
+   ...	...
+   |	`- opp n ..
+   |- device 2
+   ...
+   `- device m
+
+OPP library maintains a internal list that the SoC framework populates and
+accessed by various functions as described above. However, the structures
+representing the actual OPPs and domains are internal to the OPP library itself
+to allow for suitable abstraction reusable across systems.
+
+struct dev_pm_opp
+	The internal data structure of OPP library which is used to
+	represent an OPP. In addition to the freq, voltage, availability
+	information, it also contains internal book keeping information required
+	for the OPP library to operate on.  Pointer to this structure is
+	provided back to the users such as SoC framework to be used as a
+	identifier for OPP in the interactions with OPP layer.
+
+	WARNING:
+	  The struct dev_pm_opp pointer should not be parsed or modified by the
+	  users. The defaults of for an instance is populated by
+	  dev_pm_opp_add, but the availability of the OPP can be modified
+	  by dev_pm_opp_enable/disable functions.
+
+struct device
+	This is used to identify a domain to the OPP layer. The
+	nature of the device and its implementation is left to the user of
+	OPP library such as the SoC framework.
+
+Overall, in a simplistic view, the data structure operations is represented as
+following::
+
+  Initialization / modification:
+              +-----+        /- dev_pm_opp_enable
+  dev_pm_opp_add --> | opp | <-------
+    |         +-----+        \- dev_pm_opp_disable
+    \-------> domain_info(device)
+
+  Search functions:
+               /-- dev_pm_opp_find_freq_ceil  ---\   +-----+
+  domain_info<---- dev_pm_opp_find_freq_exact -----> | opp |
+               \-- dev_pm_opp_find_freq_floor ---/   +-----+
+
+  Retrieval functions:
+  +-----+     /- dev_pm_opp_get_voltage
+  | opp | <---
+  +-----+     \- dev_pm_opp_get_freq
+
+  domain_info <- dev_pm_opp_get_opp_count
diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
new file mode 100644
index 000000000..a125544b4
--- /dev/null
+++ b/Documentation/power/pci.rst
@@ -0,0 +1,1133 @@
+====================
+PCI Power Management
+====================
+
+Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+
+An overview of concepts and the Linux kernel's interfaces related to PCI power
+management.  Based on previous work by Patrick Mochel <mochel@transmeta.com>
+(and others).
+
+This document only covers the aspects of power management specific to PCI
+devices.  For general description of the kernel's interfaces related to device
+power management refer to Documentation/driver-api/pm/devices.rst and
+Documentation/power/runtime_pm.rst.
+
+.. contents:
+
+   1. Hardware and Platform Support for PCI Power Management
+   2. PCI Subsystem and Device Power Management
+   3. PCI Device Drivers and Power Management
+   4. Resources
+
+
+1. Hardware and Platform Support for PCI Power Management
+=========================================================
+
+1.1. Native and Platform-Based Power Management
+-----------------------------------------------
+
+In general, power management is a feature allowing one to save energy by putting
+devices into states in which they draw less power (low-power states) at the
+price of reduced functionality or performance.
+
+Usually, a device is put into a low-power state when it is underutilized or
+completely inactive.  However, when it is necessary to use the device once
+again, it has to be put back into the "fully functional" state (full-power
+state).  This may happen when there are some data for the device to handle or
+as a result of an external event requiring the device to be active, which may
+be signaled by the device itself.
+
+PCI devices may be put into low-power states in two ways, by using the device
+capabilities introduced by the PCI Bus Power Management Interface Specification,
+or with the help of platform firmware, such as an ACPI BIOS.  In the first
+approach, that is referred to as the native PCI power management (native PCI PM)
+in what follows, the device power state is changed as a result of writing a
+specific value into one of its standard configuration registers.  The second
+approach requires the platform firmware to provide special methods that may be
+used by the kernel to change the device's power state.
+
+Devices supporting the native PCI PM usually can generate wakeup signals called
+Power Management Events (PMEs) to let the kernel know about external events
+requiring the device to be active.  After receiving a PME the kernel is supposed
+to put the device that sent it into the full-power state.  However, the PCI Bus
+Power Management Interface Specification doesn't define any standard method of
+delivering the PME from the device to the CPU and the operating system kernel.
+It is assumed that the platform firmware will perform this task and therefore,
+even though a PCI device is set up to generate PMEs, it also may be necessary to
+prepare the platform firmware for notifying the CPU of the PMEs coming from the
+device (e.g. by generating interrupts).
+
+In turn, if the methods provided by the platform firmware are used for changing
+the power state of a device, usually the platform also provides a method for
+preparing the device to generate wakeup signals.  In that case, however, it
+often also is necessary to prepare the device for generating PMEs using the
+native PCI PM mechanism, because the method provided by the platform depends on
+that.
+
+Thus in many situations both the native and the platform-based power management
+mechanisms have to be used simultaneously to obtain the desired result.
+
+1.2. Native PCI Power Management
+--------------------------------
+
+The PCI Bus Power Management Interface Specification (PCI PM Spec) was
+introduced between the PCI 2.1 and PCI 2.2 Specifications.  It defined a
+standard interface for performing various operations related to power
+management.
+
+The implementation of the PCI PM Spec is optional for conventional PCI devices,
+but it is mandatory for PCI Express devices.  If a device supports the PCI PM
+Spec, it has an 8 byte power management capability field in its PCI
+configuration space.  This field is used to describe and control the standard
+features related to the native PCI power management.
+
+The PCI PM Spec defines 4 operating states for devices (D0-D3) and for buses
+(B0-B3).  The higher the number, the less power is drawn by the device or bus
+in that state.  However, the higher the number, the longer the latency for
+the device or bus to return to the full-power state (D0 or B0, respectively).
+
+There are two variants of the D3 state defined by the specification.  The first
+one is D3hot, referred to as the software accessible D3, because devices can be
+programmed to go into it.  The second one, D3cold, is the state that PCI devices
+are in when the supply voltage (Vcc) is removed from them.  It is not possible
+to program a PCI device to go into D3cold, although there may be a programmable
+interface for putting the bus the device is on into a state in which Vcc is
+removed from all devices on the bus.
+
+PCI bus power management, however, is not supported by the Linux kernel at the
+time of this writing and therefore it is not covered by this document.
+
+Note that every PCI device can be in the full-power state (D0) or in D3cold,
+regardless of whether or not it implements the PCI PM Spec.  In addition to
+that, if the PCI PM Spec is implemented by the device, it must support D3hot
+as well as D0.  The support for the D1 and D2 power states is optional.
+
+PCI devices supporting the PCI PM Spec can be programmed to go to any of the
+supported low-power states (except for D3cold).  While in D1-D3hot the
+standard configuration registers of the device must be accessible to software
+(i.e. the device is required to respond to PCI configuration accesses), although
+its I/O and memory spaces are then disabled.  This allows the device to be
+programmatically put into D0.  Thus the kernel can switch the device back and
+forth between D0 and the supported low-power states (except for D3cold) and the
+possible power state transitions the device can undergo are the following:
+
++----------------------------+
+| Current State | New State  |
++----------------------------+
+| D0            | D1, D2, D3 |
++----------------------------+
+| D1            | D2, D3     |
++----------------------------+
+| D2            | D3         |
++----------------------------+
+| D1, D2, D3    | D0         |
++----------------------------+
+
+The transition from D3cold to D0 occurs when the supply voltage is provided to
+the device (i.e. power is restored).  In that case the device returns to D0 with
+a full power-on reset sequence and the power-on defaults are restored to the
+device by hardware just as at initial power up.
+
+PCI devices supporting the PCI PM Spec can be programmed to generate PMEs
+while in any power state (D0-D3), but they are not required to be capable
+of generating PMEs from all supported power states.  In particular, the
+capability of generating PMEs from D3cold is optional and depends on the
+presence of additional voltage (3.3Vaux) allowing the device to remain
+sufficiently active to generate a wakeup signal.
+
+1.3. ACPI Device Power Management
+---------------------------------
+
+The platform firmware support for the power management of PCI devices is
+system-specific.  However, if the system in question is compliant with the
+Advanced Configuration and Power Interface (ACPI) Specification, like the
+majority of x86-based systems, it is supposed to implement device power
+management interfaces defined by the ACPI standard.
+
+For this purpose the ACPI BIOS provides special functions called "control
+methods" that may be executed by the kernel to perform specific tasks, such as
+putting a device into a low-power state.  These control methods are encoded
+using special byte-code language called the ACPI Machine Language (AML) and
+stored in the machine's BIOS.  The kernel loads them from the BIOS and executes
+them as needed using an AML interpreter that translates the AML byte code into
+computations and memory or I/O space accesses.  This way, in theory, a BIOS
+writer can provide the kernel with a means to perform actions depending
+on the system design in a system-specific fashion.
+
+ACPI control methods may be divided into global control methods, that are not
+associated with any particular devices, and device control methods, that have
+to be defined separately for each device supposed to be handled with the help of
+the platform.  This means, in particular, that ACPI device control methods can
+only be used to handle devices that the BIOS writer knew about in advance.  The
+ACPI methods used for device power management fall into that category.
+
+The ACPI specification assumes that devices can be in one of four power states
+labeled as D0, D1, D2, and D3 that roughly correspond to the native PCI PM
+D0-D3 states (although the difference between D3hot and D3cold is not taken
+into account by ACPI).  Moreover, for each power state of a device there is a
+set of power resources that have to be enabled for the device to be put into
+that state.  These power resources are controlled (i.e. enabled or disabled)
+with the help of their own control methods, _ON and _OFF, that have to be
+defined individually for each of them.
+
+To put a device into the ACPI power state Dx (where x is a number between 0 and
+3 inclusive) the kernel is supposed to (1) enable the power resources required
+by the device in this state using their _ON control methods and (2) execute the
+_PSx control method defined for the device.  In addition to that, if the device
+is going to be put into a low-power state (D1-D3) and is supposed to generate
+wakeup signals from that state, the _DSW (or _PSW, replaced with _DSW by ACPI
+3.0) control method defined for it has to be executed before _PSx.  Power
+resources that are not required by the device in the target power state and are
+not required any more by any other device should be disabled (by executing their
+_OFF control methods).  If the current power state of the device is D3, it can
+only be put into D0 this way.
+
+However, quite often the power states of devices are changed during a
+system-wide transition into a sleep state or back into the working state.  ACPI
+defines four system sleep states, S1, S2, S3, and S4, and denotes the system
+working state as S0.  In general, the target system sleep (or working) state
+determines the highest power (lowest number) state the device can be put
+into and the kernel is supposed to obtain this information by executing the
+device's _SxD control method (where x is a number between 0 and 4 inclusive).
+If the device is required to wake up the system from the target sleep state, the
+lowest power (highest number) state it can be put into is also determined by the
+target state of the system.  The kernel is then supposed to use the device's
+_SxW control method to obtain the number of that state.  It also is supposed to
+use the device's _PRW control method to learn which power resources need to be
+enabled for the device to be able to generate wakeup signals.
+
+1.4. Wakeup Signaling
+---------------------
+
+Wakeup signals generated by PCI devices, either as native PCI PMEs, or as
+a result of the execution of the _DSW (or _PSW) ACPI control method before
+putting the device into a low-power state, have to be caught and handled as
+appropriate.  If they are sent while the system is in the working state
+(ACPI S0), they should be translated into interrupts so that the kernel can
+put the devices generating them into the full-power state and take care of the
+events that triggered them.  In turn, if they are sent while the system is
+sleeping, they should cause the system's core logic to trigger wakeup.
+
+On ACPI-based systems wakeup signals sent by conventional PCI devices are
+converted into ACPI General-Purpose Events (GPEs) which are hardware signals
+from the system core logic generated in response to various events that need to
+be acted upon.  Every GPE is associated with one or more sources of potentially
+interesting events.  In particular, a GPE may be associated with a PCI device
+capable of signaling wakeup.  The information on the connections between GPEs
+and event sources is recorded in the system's ACPI BIOS from where it can be
+read by the kernel.
+
+If a PCI device known to the system's ACPI BIOS signals wakeup, the GPE
+associated with it (if there is one) is triggered.  The GPEs associated with PCI
+bridges may also be triggered in response to a wakeup signal from one of the
+devices below the bridge (this also is the case for root bridges) and, for
+example, native PCI PMEs from devices unknown to the system's ACPI BIOS may be
+handled this way.
+
+A GPE may be triggered when the system is sleeping (i.e. when it is in one of
+the ACPI S1-S4 states), in which case system wakeup is started by its core logic
+(the device that was the source of the signal causing the system wakeup to occur
+may be identified later).  The GPEs used in such situations are referred to as
+wakeup GPEs.
+
+Usually, however, GPEs are also triggered when the system is in the working
+state (ACPI S0) and in that case the system's core logic generates a System
+Control Interrupt (SCI) to notify the kernel of the event.  Then, the SCI
+handler identifies the GPE that caused the interrupt to be generated which,
+in turn, allows the kernel to identify the source of the event (that may be
+a PCI device signaling wakeup).  The GPEs used for notifying the kernel of
+events occurring while the system is in the working state are referred to as
+runtime GPEs.
+
+Unfortunately, there is no standard way of handling wakeup signals sent by
+conventional PCI devices on systems that are not ACPI-based, but there is one
+for PCI Express devices.  Namely, the PCI Express Base Specification introduced
+a native mechanism for converting native PCI PMEs into interrupts generated by
+root ports.  For conventional PCI devices native PMEs are out-of-band, so they
+are routed separately and they need not pass through bridges (in principle they
+may be routed directly to the system's core logic), but for PCI Express devices
+they are in-band messages that have to pass through the PCI Express hierarchy,
+including the root port on the path from the device to the Root Complex.  Thus
+it was possible to introduce a mechanism by which a root port generates an
+interrupt whenever it receives a PME message from one of the devices below it.
+The PCI Express Requester ID of the device that sent the PME message is then
+recorded in one of the root port's configuration registers from where it may be
+read by the interrupt handler allowing the device to be identified.  [PME
+messages sent by PCI Express endpoints integrated with the Root Complex don't
+pass through root ports, but instead they cause a Root Complex Event Collector
+(if there is one) to generate interrupts.]
+
+In principle the native PCI Express PME signaling may also be used on ACPI-based
+systems along with the GPEs, but to use it the kernel has to ask the system's
+ACPI BIOS to release control of root port configuration registers.  The ACPI
+BIOS, however, is not required to allow the kernel to control these registers
+and if it doesn't do that, the kernel must not modify their contents.  Of course
+the native PCI Express PME signaling cannot be used by the kernel in that case.
+
+
+2. PCI Subsystem and Device Power Management
+============================================
+
+2.1. Device Power Management Callbacks
+--------------------------------------
+
+The PCI Subsystem participates in the power management of PCI devices in a
+number of ways.  First of all, it provides an intermediate code layer between
+the device power management core (PM core) and PCI device drivers.
+Specifically, the pm field of the PCI subsystem's struct bus_type object,
+pci_bus_type, points to a struct dev_pm_ops object, pci_dev_pm_ops, containing
+pointers to several device power management callbacks::
+
+  const struct dev_pm_ops pci_dev_pm_ops = {
+	.prepare = pci_pm_prepare,
+	.complete = pci_pm_complete,
+	.suspend = pci_pm_suspend,
+	.resume = pci_pm_resume,
+	.freeze = pci_pm_freeze,
+	.thaw = pci_pm_thaw,
+	.poweroff = pci_pm_poweroff,
+	.restore = pci_pm_restore,
+	.suspend_noirq = pci_pm_suspend_noirq,
+	.resume_noirq = pci_pm_resume_noirq,
+	.freeze_noirq = pci_pm_freeze_noirq,
+	.thaw_noirq = pci_pm_thaw_noirq,
+	.poweroff_noirq = pci_pm_poweroff_noirq,
+	.restore_noirq = pci_pm_restore_noirq,
+	.runtime_suspend = pci_pm_runtime_suspend,
+	.runtime_resume = pci_pm_runtime_resume,
+	.runtime_idle = pci_pm_runtime_idle,
+  };
+
+These callbacks are executed by the PM core in various situations related to
+device power management and they, in turn, execute power management callbacks
+provided by PCI device drivers.  They also perform power management operations
+involving some standard configuration registers of PCI devices that device
+drivers need not know or care about.
+
+The structure representing a PCI device, struct pci_dev, contains several fields
+that these callbacks operate on::
+
+  struct pci_dev {
+	...
+	pci_power_t     current_state;  /* Current operating state. */
+	int		pm_cap;		/* PM capability offset in the
+					   configuration space */
+	unsigned int	pme_support:5;	/* Bitmask of states from which PME#
+					   can be generated */
+	unsigned int	pme_poll:1;	/* Poll device's PME status bit */
+	unsigned int	d1_support:1;	/* Low power state D1 is supported */
+	unsigned int	d2_support:1;	/* Low power state D2 is supported */
+	unsigned int	no_d1d2:1;	/* D1 and D2 are forbidden */
+	unsigned int	wakeup_prepared:1;  /* Device prepared for wake up */
+	unsigned int	d3hot_delay;	/* D3hot->D0 transition time in ms */
+	...
+  };
+
+They also indirectly use some fields of the struct device that is embedded in
+struct pci_dev.
+
+2.2. Device Initialization
+--------------------------
+
+The PCI subsystem's first task related to device power management is to
+prepare the device for power management and initialize the fields of struct
+pci_dev used for this purpose.  This happens in two functions defined in
+drivers/pci/pci.c, pci_pm_init() and platform_pci_wakeup_init().
+
+The first of these functions checks if the device supports native PCI PM
+and if that's the case the offset of its power management capability structure
+in the configuration space is stored in the pm_cap field of the device's struct
+pci_dev object.  Next, the function checks which PCI low-power states are
+supported by the device and from which low-power states the device can generate
+native PCI PMEs.  The power management fields of the device's struct pci_dev and
+the struct device embedded in it are updated accordingly and the generation of
+PMEs by the device is disabled.
+
+The second function checks if the device can be prepared to signal wakeup with
+the help of the platform firmware, such as the ACPI BIOS.  If that is the case,
+the function updates the wakeup fields in struct device embedded in the
+device's struct pci_dev and uses the firmware-provided method to prevent the
+device from signaling wakeup.
+
+At this point the device is ready for power management.  For driverless devices,
+however, this functionality is limited to a few basic operations carried out
+during system-wide transitions to a sleep state and back to the working state.
+
+2.3. Runtime Device Power Management
+------------------------------------
+
+The PCI subsystem plays a vital role in the runtime power management of PCI
+devices.  For this purpose it uses the general runtime power management
+(runtime PM) framework described in Documentation/power/runtime_pm.rst.
+Namely, it provides subsystem-level callbacks::
+
+	pci_pm_runtime_suspend()
+	pci_pm_runtime_resume()
+	pci_pm_runtime_idle()
+
+that are executed by the core runtime PM routines.  It also implements the
+entire mechanics necessary for handling runtime wakeup signals from PCI devices
+in low-power states, which at the time of this writing works for both the native
+PCI Express PME signaling and the ACPI GPE-based wakeup signaling described in
+Section 1.
+
+First, a PCI device is put into a low-power state, or suspended, with the help
+of pm_schedule_suspend() or pm_runtime_suspend() which for PCI devices call
+pci_pm_runtime_suspend() to do the actual job.  For this to work, the device's
+driver has to provide a pm->runtime_suspend() callback (see below), which is
+run by pci_pm_runtime_suspend() as the first action.  If the driver's callback
+returns successfully, the device's standard configuration registers are saved,
+the device is prepared to generate wakeup signals and, finally, it is put into
+the target low-power state.
+
+The low-power state to put the device into is the lowest-power (highest number)
+state from which it can signal wakeup.  The exact method of signaling wakeup is
+system-dependent and is determined by the PCI subsystem on the basis of the
+reported capabilities of the device and the platform firmware.  To prepare the
+device for signaling wakeup and put it into the selected low-power state, the
+PCI subsystem can use the platform firmware as well as the device's native PCI
+PM capabilities, if supported.
+
+It is expected that the device driver's pm->runtime_suspend() callback will
+not attempt to prepare the device for signaling wakeup or to put it into a
+low-power state.  The driver ought to leave these tasks to the PCI subsystem
+that has all of the information necessary to perform them.
+
+A suspended device is brought back into the "active" state, or resumed,
+with the help of pm_request_resume() or pm_runtime_resume() which both call
+pci_pm_runtime_resume() for PCI devices.  Again, this only works if the device's
+driver provides a pm->runtime_resume() callback (see below).  However, before
+the driver's callback is executed, pci_pm_runtime_resume() brings the device
+back into the full-power state, prevents it from signaling wakeup while in that
+state and restores its standard configuration registers.  Thus the driver's
+callback need not worry about the PCI-specific aspects of the device resume.
+
+Note that generally pci_pm_runtime_resume() may be called in two different
+situations.  First, it may be called at the request of the device's driver, for
+example if there are some data for it to process.  Second, it may be called
+as a result of a wakeup signal from the device itself (this sometimes is
+referred to as "remote wakeup").  Of course, for this purpose the wakeup signal
+is handled in one of the ways described in Section 1 and finally converted into
+a notification for the PCI subsystem after the source device has been
+identified.
+
+The pci_pm_runtime_idle() function, called for PCI devices by pm_runtime_idle()
+and pm_request_idle(), executes the device driver's pm->runtime_idle()
+callback, if defined, and if that callback doesn't return error code (or is not
+present at all), suspends the device with the help of pm_runtime_suspend().
+Sometimes pci_pm_runtime_idle() is called automatically by the PM core (for
+example, it is called right after the device has just been resumed), in which
+cases it is expected to suspend the device if that makes sense.  Usually,
+however, the PCI subsystem doesn't really know if the device really can be
+suspended, so it lets the device's driver decide by running its
+pm->runtime_idle() callback.
+
+2.4. System-Wide Power Transitions
+----------------------------------
+There are a few different types of system-wide power transitions, described in
+Documentation/driver-api/pm/devices.rst.  Each of them requires devices to be
+handled in a specific way and the PM core executes subsystem-level power
+management callbacks for this purpose.  They are executed in phases such that
+each phase involves executing the same subsystem-level callback for every device
+belonging to the given subsystem before the next phase begins.  These phases
+always run after tasks have been frozen.
+
+2.4.1. System Suspend
+^^^^^^^^^^^^^^^^^^^^^
+
+When the system is going into a sleep state in which the contents of memory will
+be preserved, such as one of the ACPI sleep states S1-S3, the phases are:
+
+	prepare, suspend, suspend_noirq.
+
+The following PCI bus type's callbacks, respectively, are used in these phases::
+
+	pci_pm_prepare()
+	pci_pm_suspend()
+	pci_pm_suspend_noirq()
+
+The pci_pm_prepare() routine first puts the device into the "fully functional"
+state with the help of pm_runtime_resume().  Then, it executes the device
+driver's pm->prepare() callback if defined (i.e. if the driver's struct
+dev_pm_ops object is present and the prepare pointer in that object is valid).
+
+The pci_pm_suspend() routine first checks if the device's driver implements
+legacy PCI suspend routines (see Section 3), in which case the driver's legacy
+suspend callback is executed, if present, and its result is returned.  Next, if
+the device's driver doesn't provide a struct dev_pm_ops object (containing
+pointers to the driver's callbacks), pci_pm_default_suspend() is called, which
+simply turns off the device's bus master capability and runs
+pcibios_disable_device() to disable it, unless the device is a bridge (PCI
+bridges are ignored by this routine).  Next, the device driver's pm->suspend()
+callback is executed, if defined, and its result is returned if it fails.
+Finally, pci_fixup_device() is called to apply hardware suspend quirks related
+to the device if necessary.
+
+Note that the suspend phase is carried out asynchronously for PCI devices, so
+the pci_pm_suspend() callback may be executed in parallel for any pair of PCI
+devices that don't depend on each other in a known way (i.e. none of the paths
+in the device tree from the root bridge to a leaf device contains both of them).
+
+The pci_pm_suspend_noirq() routine is executed after suspend_device_irqs() has
+been called, which means that the device driver's interrupt handler won't be
+invoked while this routine is running.  It first checks if the device's driver
+implements legacy PCI suspends routines (Section 3), in which case the legacy
+late suspend routine is called and its result is returned (the standard
+configuration registers of the device are saved if the driver's callback hasn't
+done that).  Second, if the device driver's struct dev_pm_ops object is not
+present, the device's standard configuration registers are saved and the routine
+returns success.  Otherwise the device driver's pm->suspend_noirq() callback is
+executed, if present, and its result is returned if it fails.  Next, if the
+device's standard configuration registers haven't been saved yet (one of the
+device driver's callbacks executed before might do that), pci_pm_suspend_noirq()
+saves them, prepares the device to signal wakeup (if necessary) and puts it into
+a low-power state.
+
+The low-power state to put the device into is the lowest-power (highest number)
+state from which it can signal wakeup while the system is in the target sleep
+state.  Just like in the runtime PM case described above, the mechanism of
+signaling wakeup is system-dependent and determined by the PCI subsystem, which
+is also responsible for preparing the device to signal wakeup from the system's
+target sleep state as appropriate.
+
+PCI device drivers (that don't implement legacy power management callbacks) are
+generally not expected to prepare devices for signaling wakeup or to put them
+into low-power states.  However, if one of the driver's suspend callbacks
+(pm->suspend() or pm->suspend_noirq()) saves the device's standard configuration
+registers, pci_pm_suspend_noirq() will assume that the device has been prepared
+to signal wakeup and put into a low-power state by the driver (the driver is
+then assumed to have used the helper functions provided by the PCI subsystem for
+this purpose).  PCI device drivers are not encouraged to do that, but in some
+rare cases doing that in the driver may be the optimum approach.
+
+2.4.2. System Resume
+^^^^^^^^^^^^^^^^^^^^
+
+When the system is undergoing a transition from a sleep state in which the
+contents of memory have been preserved, such as one of the ACPI sleep states
+S1-S3, into the working state (ACPI S0), the phases are:
+
+	resume_noirq, resume, complete.
+
+The following PCI bus type's callbacks, respectively, are executed in these
+phases::
+
+	pci_pm_resume_noirq()
+	pci_pm_resume()
+	pci_pm_complete()
+
+The pci_pm_resume_noirq() routine first puts the device into the full-power
+state, restores its standard configuration registers and applies early resume
+hardware quirks related to the device, if necessary.  This is done
+unconditionally, regardless of whether or not the device's driver implements
+legacy PCI power management callbacks (this way all PCI devices are in the
+full-power state and their standard configuration registers have been restored
+when their interrupt handlers are invoked for the first time during resume,
+which allows the kernel to avoid problems with the handling of shared interrupts
+by drivers whose devices are still suspended).  If legacy PCI power management
+callbacks (see Section 3) are implemented by the device's driver, the legacy
+early resume callback is executed and its result is returned.  Otherwise, the
+device driver's pm->resume_noirq() callback is executed, if defined, and its
+result is returned.
+
+The pci_pm_resume() routine first checks if the device's standard configuration
+registers have been restored and restores them if that's not the case (this
+only is necessary in the error path during a failing suspend).  Next, resume
+hardware quirks related to the device are applied, if necessary, and if the
+device's driver implements legacy PCI power management callbacks (see
+Section 3), the driver's legacy resume callback is executed and its result is
+returned.  Otherwise, the device's wakeup signaling mechanisms are blocked and
+its driver's pm->resume() callback is executed, if defined (the callback's
+result is then returned).
+
+The resume phase is carried out asynchronously for PCI devices, like the
+suspend phase described above, which means that if two PCI devices don't depend
+on each other in a known way, the pci_pm_resume() routine may be executed for
+the both of them in parallel.
+
+The pci_pm_complete() routine only executes the device driver's pm->complete()
+callback, if defined.
+
+2.4.3. System Hibernation
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+System hibernation is more complicated than system suspend, because it requires
+a system image to be created and written into a persistent storage medium.  The
+image is created atomically and all devices are quiesced, or frozen, before that
+happens.
+
+The freezing of devices is carried out after enough memory has been freed (at
+the time of this writing the image creation requires at least 50% of system RAM
+to be free) in the following three phases:
+
+	prepare, freeze, freeze_noirq
+
+that correspond to the PCI bus type's callbacks::
+
+	pci_pm_prepare()
+	pci_pm_freeze()
+	pci_pm_freeze_noirq()
+
+This means that the prepare phase is exactly the same as for system suspend.
+The other two phases, however, are different.
+
+The pci_pm_freeze() routine is quite similar to pci_pm_suspend(), but it runs
+the device driver's pm->freeze() callback, if defined, instead of pm->suspend(),
+and it doesn't apply the suspend-related hardware quirks.  It is executed
+asynchronously for different PCI devices that don't depend on each other in a
+known way.
+
+The pci_pm_freeze_noirq() routine, in turn, is similar to
+pci_pm_suspend_noirq(), but it calls the device driver's pm->freeze_noirq()
+routine instead of pm->suspend_noirq().  It also doesn't attempt to prepare the
+device for signaling wakeup and put it into a low-power state.  Still, it saves
+the device's standard configuration registers if they haven't been saved by one
+of the driver's callbacks.
+
+Once the image has been created, it has to be saved.  However, at this point all
+devices are frozen and they cannot handle I/O, while their ability to handle
+I/O is obviously necessary for the image saving.  Thus they have to be brought
+back to the fully functional state and this is done in the following phases:
+
+	thaw_noirq, thaw, complete
+
+using the following PCI bus type's callbacks::
+
+	pci_pm_thaw_noirq()
+	pci_pm_thaw()
+	pci_pm_complete()
+
+respectively.
+
+The first of them, pci_pm_thaw_noirq(), is analogous to pci_pm_resume_noirq().
+It puts the device into the full power state and restores its standard
+configuration registers.  It also executes the device driver's pm->thaw_noirq()
+callback, if defined, instead of pm->resume_noirq().
+
+The pci_pm_thaw() routine is similar to pci_pm_resume(), but it runs the device
+driver's pm->thaw() callback instead of pm->resume().  It is executed
+asynchronously for different PCI devices that don't depend on each other in a
+known way.
+
+The complete phase is the same as for system resume.
+
+After saving the image, devices need to be powered down before the system can
+enter the target sleep state (ACPI S4 for ACPI-based systems).  This is done in
+three phases:
+
+	prepare, poweroff, poweroff_noirq
+
+where the prepare phase is exactly the same as for system suspend.  The other
+two phases are analogous to the suspend and suspend_noirq phases, respectively.
+The PCI subsystem-level callbacks they correspond to::
+
+	pci_pm_poweroff()
+	pci_pm_poweroff_noirq()
+
+work in analogy with pci_pm_suspend() and pci_pm_poweroff_noirq(), respectively,
+although they don't attempt to save the device's standard configuration
+registers.
+
+2.4.4. System Restore
+^^^^^^^^^^^^^^^^^^^^^
+
+System restore requires a hibernation image to be loaded into memory and the
+pre-hibernation memory contents to be restored before the pre-hibernation system
+activity can be resumed.
+
+As described in Documentation/driver-api/pm/devices.rst, the hibernation image
+is loaded into memory by a fresh instance of the kernel, called the boot kernel,
+which in turn is loaded and run by a boot loader in the usual way.  After the
+boot kernel has loaded the image, it needs to replace its own code and data with
+the code and data of the "hibernated" kernel stored within the image, called the
+image kernel.  For this purpose all devices are frozen just like before creating
+the image during hibernation, in the
+
+	prepare, freeze, freeze_noirq
+
+phases described above.  However, the devices affected by these phases are only
+those having drivers in the boot kernel; other devices will still be in whatever
+state the boot loader left them.
+
+Should the restoration of the pre-hibernation memory contents fail, the boot
+kernel would go through the "thawing" procedure described above, using the
+thaw_noirq, thaw, and complete phases (that will only affect the devices having
+drivers in the boot kernel), and then continue running normally.
+
+If the pre-hibernation memory contents are restored successfully, which is the
+usual situation, control is passed to the image kernel, which then becomes
+responsible for bringing the system back to the working state.  To achieve this,
+it must restore the devices' pre-hibernation functionality, which is done much
+like waking up from the memory sleep state, although it involves different
+phases:
+
+	restore_noirq, restore, complete
+
+The first two of these are analogous to the resume_noirq and resume phases
+described above, respectively, and correspond to the following PCI subsystem
+callbacks::
+
+	pci_pm_restore_noirq()
+	pci_pm_restore()
+
+These callbacks work in analogy with pci_pm_resume_noirq() and pci_pm_resume(),
+respectively, but they execute the device driver's pm->restore_noirq() and
+pm->restore() callbacks, if available.
+
+The complete phase is carried out in exactly the same way as during system
+resume.
+
+
+3. PCI Device Drivers and Power Management
+==========================================
+
+3.1. Power Management Callbacks
+-------------------------------
+
+PCI device drivers participate in power management by providing callbacks to be
+executed by the PCI subsystem's power management routines described above and by
+controlling the runtime power management of their devices.
+
+At the time of this writing there are two ways to define power management
+callbacks for a PCI device driver, the recommended one, based on using a
+dev_pm_ops structure described in Documentation/driver-api/pm/devices.rst, and
+the "legacy" one, in which the .suspend() and .resume() callbacks from struct
+pci_driver are used.  The legacy approach, however, doesn't allow one to define
+runtime power management callbacks and is not really suitable for any new
+drivers.  Therefore it is not covered by this document (refer to the source code
+to learn more about it).
+
+It is recommended that all PCI device drivers define a struct dev_pm_ops object
+containing pointers to power management (PM) callbacks that will be executed by
+the PCI subsystem's PM routines in various circumstances.  A pointer to the
+driver's struct dev_pm_ops object has to be assigned to the driver.pm field in
+its struct pci_driver object.  Once that has happened, the "legacy" PM callbacks
+in struct pci_driver are ignored (even if they are not NULL).
+
+The PM callbacks in struct dev_pm_ops are not mandatory and if they are not
+defined (i.e. the respective fields of struct dev_pm_ops are unset) the PCI
+subsystem will handle the device in a simplified default manner.  If they are
+defined, though, they are expected to behave as described in the following
+subsections.
+
+3.1.1. prepare()
+^^^^^^^^^^^^^^^^
+
+The prepare() callback is executed during system suspend, during hibernation
+(when a hibernation image is about to be created), during power-off after
+saving a hibernation image and during system restore, when a hibernation image
+has just been loaded into memory.
+
+This callback is only necessary if the driver's device has children that in
+general may be registered at any time.  In that case the role of the prepare()
+callback is to prevent new children of the device from being registered until
+one of the resume_noirq(), thaw_noirq(), or restore_noirq() callbacks is run.
+
+In addition to that the prepare() callback may carry out some operations
+preparing the device to be suspended, although it should not allocate memory
+(if additional memory is required to suspend the device, it has to be
+preallocated earlier, for example in a suspend/hibernate notifier as described
+in Documentation/driver-api/pm/notifiers.rst).
+
+3.1.2. suspend()
+^^^^^^^^^^^^^^^^
+
+The suspend() callback is only executed during system suspend, after prepare()
+callbacks have been executed for all devices in the system.
+
+This callback is expected to quiesce the device and prepare it to be put into a
+low-power state by the PCI subsystem.  It is not required (in fact it even is
+not recommended) that a PCI driver's suspend() callback save the standard
+configuration registers of the device, prepare it for waking up the system, or
+put it into a low-power state.  All of these operations can very well be taken
+care of by the PCI subsystem, without the driver's participation.
+
+However, in some rare case it is convenient to carry out these operations in
+a PCI driver.  Then, pci_save_state(), pci_prepare_to_sleep(), and
+pci_set_power_state() should be used to save the device's standard configuration
+registers, to prepare it for system wakeup (if necessary), and to put it into a
+low-power state, respectively.  Moreover, if the driver calls pci_save_state(),
+the PCI subsystem will not execute either pci_prepare_to_sleep(), or
+pci_set_power_state() for its device, so the driver is then responsible for
+handling the device as appropriate.
+
+While the suspend() callback is being executed, the driver's interrupt handler
+can be invoked to handle an interrupt from the device, so all suspend-related
+operations relying on the driver's ability to handle interrupts should be
+carried out in this callback.
+
+3.1.3. suspend_noirq()
+^^^^^^^^^^^^^^^^^^^^^^
+
+The suspend_noirq() callback is only executed during system suspend, after
+suspend() callbacks have been executed for all devices in the system and
+after device interrupts have been disabled by the PM core.
+
+The difference between suspend_noirq() and suspend() is that the driver's
+interrupt handler will not be invoked while suspend_noirq() is running.  Thus
+suspend_noirq() can carry out operations that would cause race conditions to
+arise if they were performed in suspend().
+
+3.1.4. freeze()
+^^^^^^^^^^^^^^^
+
+The freeze() callback is hibernation-specific and is executed in two situations,
+during hibernation, after prepare() callbacks have been executed for all devices
+in preparation for the creation of a system image, and during restore,
+after a system image has been loaded into memory from persistent storage and the
+prepare() callbacks have been executed for all devices.
+
+The role of this callback is analogous to the role of the suspend() callback
+described above.  In fact, they only need to be different in the rare cases when
+the driver takes the responsibility for putting the device into a low-power
+state.
+
+In that cases the freeze() callback should not prepare the device system wakeup
+or put it into a low-power state.  Still, either it or freeze_noirq() should
+save the device's standard configuration registers using pci_save_state().
+
+3.1.5. freeze_noirq()
+^^^^^^^^^^^^^^^^^^^^^
+
+The freeze_noirq() callback is hibernation-specific.  It is executed during
+hibernation, after prepare() and freeze() callbacks have been executed for all
+devices in preparation for the creation of a system image, and during restore,
+after a system image has been loaded into memory and after prepare() and
+freeze() callbacks have been executed for all devices.  It is always executed
+after device interrupts have been disabled by the PM core.
+
+The role of this callback is analogous to the role of the suspend_noirq()
+callback described above and it very rarely is necessary to define
+freeze_noirq().
+
+The difference between freeze_noirq() and freeze() is analogous to the
+difference between suspend_noirq() and suspend().
+
+3.1.6. poweroff()
+^^^^^^^^^^^^^^^^^
+
+The poweroff() callback is hibernation-specific.  It is executed when the system
+is about to be powered off after saving a hibernation image to a persistent
+storage.  prepare() callbacks are executed for all devices before poweroff() is
+called.
+
+The role of this callback is analogous to the role of the suspend() and freeze()
+callbacks described above, although it does not need to save the contents of
+the device's registers.  In particular, if the driver wants to put the device
+into a low-power state itself instead of allowing the PCI subsystem to do that,
+the poweroff() callback should use pci_prepare_to_sleep() and
+pci_set_power_state() to prepare the device for system wakeup and to put it
+into a low-power state, respectively, but it need not save the device's standard
+configuration registers.
+
+3.1.7. poweroff_noirq()
+^^^^^^^^^^^^^^^^^^^^^^^
+
+The poweroff_noirq() callback is hibernation-specific.  It is executed after
+poweroff() callbacks have been executed for all devices in the system.
+
+The role of this callback is analogous to the role of the suspend_noirq() and
+freeze_noirq() callbacks described above, but it does not need to save the
+contents of the device's registers.
+
+The difference between poweroff_noirq() and poweroff() is analogous to the
+difference between suspend_noirq() and suspend().
+
+3.1.8. resume_noirq()
+^^^^^^^^^^^^^^^^^^^^^
+
+The resume_noirq() callback is only executed during system resume, after the
+PM core has enabled the non-boot CPUs.  The driver's interrupt handler will not
+be invoked while resume_noirq() is running, so this callback can carry out
+operations that might race with the interrupt handler.
+
+Since the PCI subsystem unconditionally puts all devices into the full power
+state in the resume_noirq phase of system resume and restores their standard
+configuration registers, resume_noirq() is usually not necessary.  In general
+it should only be used for performing operations that would lead to race
+conditions if carried out by resume().
+
+3.1.9. resume()
+^^^^^^^^^^^^^^^
+
+The resume() callback is only executed during system resume, after
+resume_noirq() callbacks have been executed for all devices in the system and
+device interrupts have been enabled by the PM core.
+
+This callback is responsible for restoring the pre-suspend configuration of the
+device and bringing it back to the fully functional state.  The device should be
+able to process I/O in a usual way after resume() has returned.
+
+3.1.10. thaw_noirq()
+^^^^^^^^^^^^^^^^^^^^
+
+The thaw_noirq() callback is hibernation-specific.  It is executed after a
+system image has been created and the non-boot CPUs have been enabled by the PM
+core, in the thaw_noirq phase of hibernation.  It also may be executed if the
+loading of a hibernation image fails during system restore (it is then executed
+after enabling the non-boot CPUs).  The driver's interrupt handler will not be
+invoked while thaw_noirq() is running.
+
+The role of this callback is analogous to the role of resume_noirq().  The
+difference between these two callbacks is that thaw_noirq() is executed after
+freeze() and freeze_noirq(), so in general it does not need to modify the
+contents of the device's registers.
+
+3.1.11. thaw()
+^^^^^^^^^^^^^^
+
+The thaw() callback is hibernation-specific.  It is executed after thaw_noirq()
+callbacks have been executed for all devices in the system and after device
+interrupts have been enabled by the PM core.
+
+This callback is responsible for restoring the pre-freeze configuration of
+the device, so that it will work in a usual way after thaw() has returned.
+
+3.1.12. restore_noirq()
+^^^^^^^^^^^^^^^^^^^^^^^
+
+The restore_noirq() callback is hibernation-specific.  It is executed in the
+restore_noirq phase of hibernation, when the boot kernel has passed control to
+the image kernel and the non-boot CPUs have been enabled by the image kernel's
+PM core.
+
+This callback is analogous to resume_noirq() with the exception that it cannot
+make any assumption on the previous state of the device, even if the BIOS (or
+generally the platform firmware) is known to preserve that state over a
+suspend-resume cycle.
+
+For the vast majority of PCI device drivers there is no difference between
+resume_noirq() and restore_noirq().
+
+3.1.13. restore()
+^^^^^^^^^^^^^^^^^
+
+The restore() callback is hibernation-specific.  It is executed after
+restore_noirq() callbacks have been executed for all devices in the system and
+after the PM core has enabled device drivers' interrupt handlers to be invoked.
+
+This callback is analogous to resume(), just like restore_noirq() is analogous
+to resume_noirq().  Consequently, the difference between restore_noirq() and
+restore() is analogous to the difference between resume_noirq() and resume().
+
+For the vast majority of PCI device drivers there is no difference between
+resume() and restore().
+
+3.1.14. complete()
+^^^^^^^^^^^^^^^^^^
+
+The complete() callback is executed in the following situations:
+
+  - during system resume, after resume() callbacks have been executed for all
+    devices,
+  - during hibernation, before saving the system image, after thaw() callbacks
+    have been executed for all devices,
+  - during system restore, when the system is going back to its pre-hibernation
+    state, after restore() callbacks have been executed for all devices.
+
+It also may be executed if the loading of a hibernation image into memory fails
+(in that case it is run after thaw() callbacks have been executed for all
+devices that have drivers in the boot kernel).
+
+This callback is entirely optional, although it may be necessary if the
+prepare() callback performs operations that need to be reversed.
+
+3.1.15. runtime_suspend()
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The runtime_suspend() callback is specific to device runtime power management
+(runtime PM).  It is executed by the PM core's runtime PM framework when the
+device is about to be suspended (i.e. quiesced and put into a low-power state)
+at run time.
+
+This callback is responsible for freezing the device and preparing it to be
+put into a low-power state, but it must allow the PCI subsystem to perform all
+of the PCI-specific actions necessary for suspending the device.
+
+3.1.16. runtime_resume()
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+The runtime_resume() callback is specific to device runtime PM.  It is executed
+by the PM core's runtime PM framework when the device is about to be resumed
+(i.e. put into the full-power state and programmed to process I/O normally) at
+run time.
+
+This callback is responsible for restoring the normal functionality of the
+device after it has been put into the full-power state by the PCI subsystem.
+The device is expected to be able to process I/O in the usual way after
+runtime_resume() has returned.
+
+3.1.17. runtime_idle()
+^^^^^^^^^^^^^^^^^^^^^^
+
+The runtime_idle() callback is specific to device runtime PM.  It is executed
+by the PM core's runtime PM framework whenever it may be desirable to suspend
+the device according to the PM core's information.  In particular, it is
+automatically executed right after runtime_resume() has returned in case the
+resume of the device has happened as a result of a spurious event.
+
+This callback is optional, but if it is not implemented or if it returns 0, the
+PCI subsystem will call pm_runtime_suspend() for the device, which in turn will
+cause the driver's runtime_suspend() callback to be executed.
+
+3.1.18. Pointing Multiple Callback Pointers to One Routine
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Although in principle each of the callbacks described in the previous
+subsections can be defined as a separate function, it often is convenient to
+point two or more members of struct dev_pm_ops to the same routine.  There are
+a few convenience macros that can be used for this purpose.
+
+The SIMPLE_DEV_PM_OPS macro declares a struct dev_pm_ops object with one
+suspend routine pointed to by the .suspend(), .freeze(), and .poweroff()
+members and one resume routine pointed to by the .resume(), .thaw(), and
+.restore() members.  The other function pointers in this struct dev_pm_ops are
+unset.
+
+The UNIVERSAL_DEV_PM_OPS macro is similar to SIMPLE_DEV_PM_OPS, but it
+additionally sets the .runtime_resume() pointer to the same value as
+.resume() (and .thaw(), and .restore()) and the .runtime_suspend() pointer to
+the same value as .suspend() (and .freeze() and .poweroff()).
+
+The SET_SYSTEM_SLEEP_PM_OPS can be used inside of a declaration of struct
+dev_pm_ops to indicate that one suspend routine is to be pointed to by the
+.suspend(), .freeze(), and .poweroff() members and one resume routine is to
+be pointed to by the .resume(), .thaw(), and .restore() members.
+
+3.1.19. Driver Flags for Power Management
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The PM core allows device drivers to set flags that influence the handling of
+power management for the devices by the core itself and by middle layer code
+including the PCI bus type.  The flags should be set once at the driver probe
+time with the help of the dev_pm_set_driver_flags() function and they should not
+be updated directly afterwards.
+
+The DPM_FLAG_NO_DIRECT_COMPLETE flag prevents the PM core from using the
+direct-complete mechanism allowing device suspend/resume callbacks to be skipped
+if the device is in runtime suspend when the system suspend starts.  That also
+affects all of the ancestors of the device, so this flag should only be used if
+absolutely necessary.
+
+The DPM_FLAG_SMART_PREPARE flag causes the PCI bus type to return a positive
+value from pci_pm_prepare() only if the ->prepare callback provided by the
+driver of the device returns a positive value.  That allows the driver to opt
+out from using the direct-complete mechanism dynamically (whereas setting
+DPM_FLAG_NO_DIRECT_COMPLETE means permanent opt-out).
+
+The DPM_FLAG_SMART_SUSPEND flag tells the PCI bus type that from the driver's
+perspective the device can be safely left in runtime suspend during system
+suspend.  That causes pci_pm_suspend(), pci_pm_freeze() and pci_pm_poweroff()
+to avoid resuming the device from runtime suspend unless there are PCI-specific
+reasons for doing that.  Also, it causes pci_pm_suspend_late/noirq() and
+pci_pm_poweroff_late/noirq() to return early if the device remains in runtime
+suspend during the "late" phase of the system-wide transition under way.
+Moreover, if the device is in runtime suspend in pci_pm_resume_noirq() or
+pci_pm_restore_noirq(), its runtime PM status will be changed to "active" (as it
+is going to be put into D0 going forward).
+
+Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows its
+"noirq" and "early" resume callbacks to be skipped if the device can be left
+in suspend after a system-wide transition into the working state.  This flag is
+taken into consideration by the PM core along with the power.may_skip_resume
+status bit of the device which is set by pci_pm_suspend_noirq() in certain
+situations.  If the PM core determines that the driver's "noirq" and "early"
+resume callbacks should be skipped, the dev_pm_skip_resume() helper function
+will return "true" and that will cause pci_pm_resume_noirq() and
+pci_pm_resume_early() to return upfront without touching the device and
+executing the driver callbacks.
+
+3.2. Device Runtime Power Management
+------------------------------------
+
+In addition to providing device power management callbacks PCI device drivers
+are responsible for controlling the runtime power management (runtime PM) of
+their devices.
+
+The PCI device runtime PM is optional, but it is recommended that PCI device
+drivers implement it at least in the cases where there is a reliable way of
+verifying that the device is not used (like when the network cable is detached
+from an Ethernet adapter or there are no devices attached to a USB controller).
+
+To support the PCI runtime PM the driver first needs to implement the
+runtime_suspend() and runtime_resume() callbacks.  It also may need to implement
+the runtime_idle() callback to prevent the device from being suspended again
+every time right after the runtime_resume() callback has returned
+(alternatively, the runtime_suspend() callback will have to check if the
+device should really be suspended and return -EAGAIN if that is not the case).
+
+The runtime PM of PCI devices is enabled by default by the PCI core.  PCI
+device drivers do not need to enable it and should not attempt to do so.
+However, it is blocked by pci_pm_init() that runs the pm_runtime_forbid()
+helper function.  In addition to that, the runtime PM usage counter of
+each PCI device is incremented by local_pci_probe() before executing the
+probe callback provided by the device's driver.
+
+If a PCI driver implements the runtime PM callbacks and intends to use the
+runtime PM framework provided by the PM core and the PCI subsystem, it needs
+to decrement the device's runtime PM usage counter in its probe callback
+function.  If it doesn't do that, the counter will always be different from
+zero for the device and it will never be runtime-suspended.  The simplest
+way to do that is by calling pm_runtime_put_noidle(), but if the driver
+wants to schedule an autosuspend right away, for example, it may call
+pm_runtime_put_autosuspend() instead for this purpose.  Generally, it
+just needs to call a function that decrements the devices usage counter
+from its probe routine to make runtime PM work for the device.
+
+It is important to remember that the driver's runtime_suspend() callback
+may be executed right after the usage counter has been decremented, because
+user space may already have caused the pm_runtime_allow() helper function
+unblocking the runtime PM of the device to run via sysfs, so the driver must
+be prepared to cope with that.
+
+The driver itself should not call pm_runtime_allow(), though.  Instead, it
+should let user space or some platform-specific code do that (user space can
+do it via sysfs as stated above), but it must be prepared to handle the
+runtime PM of the device correctly as soon as pm_runtime_allow() is called
+(which may happen at any time, even before the driver is loaded).
+
+When the driver's remove callback runs, it has to balance the decrementation
+of the device's runtime PM usage counter at the probe time.  For this reason,
+if it has decremented the counter in its probe callback, it must run
+pm_runtime_get_noresume() in its remove callback.  [Since the core carries
+out a runtime resume of the device and bumps up the device's usage counter
+before running the driver's remove callback, the runtime PM of the device
+is effectively disabled for the duration of the remove execution and all
+runtime PM helper functions incrementing the device's usage counter are
+then effectively equivalent to pm_runtime_get_noresume().]
+
+The runtime PM framework works by processing requests to suspend or resume
+devices, or to check if they are idle (in which cases it is reasonable to
+subsequently request that they be suspended).  These requests are represented
+by work items put into the power management workqueue, pm_wq.  Although there
+are a few situations in which power management requests are automatically
+queued by the PM core (for example, after processing a request to resume a
+device the PM core automatically queues a request to check if the device is
+idle), device drivers are generally responsible for queuing power management
+requests for their devices.  For this purpose they should use the runtime PM
+helper functions provided by the PM core, discussed in
+Documentation/power/runtime_pm.rst.
+
+Devices can also be suspended and resumed synchronously, without placing a
+request into pm_wq.  In the majority of cases this also is done by their
+drivers that use helper functions provided by the PM core for this purpose.
+
+For more information on the runtime PM of devices refer to
+Documentation/power/runtime_pm.rst.
+
+
+4. Resources
+============
+
+PCI Local Bus Specification, Rev. 3.0
+
+PCI Bus Power Management Interface Specification, Rev. 1.2
+
+Advanced Configuration and Power Interface (ACPI) Specification, Rev. 3.0b
+
+PCI Express Base Specification, Rev. 2.0
+
+Documentation/driver-api/pm/devices.rst
+
+Documentation/power/runtime_pm.rst
diff --git a/Documentation/power/pm_qos_interface.rst b/Documentation/power/pm_qos_interface.rst
new file mode 100644
index 000000000..69b0fe3e2
--- /dev/null
+++ b/Documentation/power/pm_qos_interface.rst
@@ -0,0 +1,218 @@
+===============================
+PM Quality Of Service Interface
+===============================
+
+This interface provides a kernel and user mode interface for registering
+performance expectations by drivers, subsystems and user space applications on
+one of the parameters.
+
+Two different PM QoS frameworks are available:
+ * CPU latency QoS.
+ * The per-device PM QoS framework provides the API to manage the
+   per-device latency constraints and PM QoS flags.
+
+The latency unit used in the PM QoS framework is the microsecond (usec).
+
+
+1. PM QoS framework
+===================
+
+A global list of CPU latency QoS requests is maintained along with an aggregated
+(effective) target value.  The aggregated target value is updated with changes
+to the request list or elements of the list.  For CPU latency QoS, the
+aggregated target value is simply the min of the request values held in the list
+elements.
+
+Note: the aggregated target value is implemented as an atomic variable so that
+reading the aggregated value does not require any locking mechanism.
+
+From kernel space the use of this interface is simple:
+
+void cpu_latency_qos_add_request(handle, target_value):
+  Will insert an element into the CPU latency QoS list with the target value.
+  Upon change to this list the new target is recomputed and any registered
+  notifiers are called only if the target value is now different.
+  Clients of PM QoS need to save the returned handle for future use in other
+  PM QoS API functions.
+
+void cpu_latency_qos_update_request(handle, new_target_value):
+  Will update the list element pointed to by the handle with the new target
+  value and recompute the new aggregated target, calling the notification tree
+  if the target is changed.
+
+void cpu_latency_qos_remove_request(handle):
+  Will remove the element.  After removal it will update the aggregate target
+  and call the notification tree if the target was changed as a result of
+  removing the request.
+
+int cpu_latency_qos_limit():
+  Returns the aggregated value for the CPU latency QoS.
+
+int cpu_latency_qos_request_active(handle):
+  Returns if the request is still active, i.e. it has not been removed from the
+  CPU latency QoS list.
+
+int cpu_latency_qos_add_notifier(notifier):
+  Adds a notification callback function to the CPU latency QoS. The callback is
+  called when the aggregated value for the CPU latency QoS is changed.
+
+int cpu_latency_qos_remove_notifier(notifier):
+  Removes the notification callback function from the CPU latency QoS.
+
+
+From user space:
+
+The infrastructure exposes one device node, /dev/cpu_dma_latency, for the CPU
+latency QoS.
+
+Only processes can register a PM QoS request.  To provide for automatic
+cleanup of a process, the interface requires the process to register its
+parameter requests as follows.
+
+To register the default PM QoS target for the CPU latency QoS, the process must
+open /dev/cpu_dma_latency.
+
+As long as the device node is held open that process has a registered
+request on the parameter.
+
+To change the requested target value, the process needs to write an s32 value to
+the open device node.  Alternatively, it can write a hex string for the value
+using the 10 char long format e.g. "0x12345678".  This translates to a
+cpu_latency_qos_update_request() call.
+
+To remove the user mode request for a target value simply close the device
+node.
+
+
+2. PM QoS per-device latency and flags framework
+================================================
+
+For each device, there are three lists of PM QoS requests. Two of them are
+maintained along with the aggregated targets of resume latency and active
+state latency tolerance (in microseconds) and the third one is for PM QoS flags.
+Values are updated in response to changes of the request list.
+
+The target values of resume latency and active state latency tolerance are
+simply the minimum of the request values held in the parameter list elements.
+The PM QoS flags aggregate value is a gather (bitwise OR) of all list elements'
+values.  One device PM QoS flag is defined currently: PM_QOS_FLAG_NO_POWER_OFF.
+
+Note: The aggregated target values are implemented in such a way that reading
+the aggregated value does not require any locking mechanism.
+
+
+From kernel mode the use of this interface is the following:
+
+int dev_pm_qos_add_request(device, handle, type, value):
+  Will insert an element into the list for that identified device with the
+  target value.  Upon change to this list the new target is recomputed and any
+  registered notifiers are called only if the target value is now different.
+  Clients of dev_pm_qos need to save the handle for future use in other
+  dev_pm_qos API functions.
+
+int dev_pm_qos_update_request(handle, new_value):
+  Will update the list element pointed to by the handle with the new target
+  value and recompute the new aggregated target, calling the notification
+  trees if the target is changed.
+
+int dev_pm_qos_remove_request(handle):
+  Will remove the element.  After removal it will update the aggregate target
+  and call the notification trees if the target was changed as a result of
+  removing the request.
+
+s32 dev_pm_qos_read_value(device, type):
+  Returns the aggregated value for a given device's constraints list.
+
+enum pm_qos_flags_status dev_pm_qos_flags(device, mask)
+  Check PM QoS flags of the given device against the given mask of flags.
+  The meaning of the return values is as follows:
+
+	PM_QOS_FLAGS_ALL:
+		All flags from the mask are set
+	PM_QOS_FLAGS_SOME:
+		Some flags from the mask are set
+	PM_QOS_FLAGS_NONE:
+		No flags from the mask are set
+	PM_QOS_FLAGS_UNDEFINED:
+		The device's PM QoS structure has not been initialized
+		or the list of requests is empty.
+
+int dev_pm_qos_add_ancestor_request(dev, handle, type, value)
+  Add a PM QoS request for the first direct ancestor of the given device whose
+  power.ignore_children flag is unset (for DEV_PM_QOS_RESUME_LATENCY requests)
+  or whose power.set_latency_tolerance callback pointer is not NULL (for
+  DEV_PM_QOS_LATENCY_TOLERANCE requests).
+
+int dev_pm_qos_expose_latency_limit(device, value)
+  Add a request to the device's PM QoS list of resume latency constraints and
+  create a sysfs attribute pm_qos_resume_latency_us under the device's power
+  directory allowing user space to manipulate that request.
+
+void dev_pm_qos_hide_latency_limit(device)
+  Drop the request added by dev_pm_qos_expose_latency_limit() from the device's
+  PM QoS list of resume latency constraints and remove sysfs attribute
+  pm_qos_resume_latency_us from the device's power directory.
+
+int dev_pm_qos_expose_flags(device, value)
+  Add a request to the device's PM QoS list of flags and create sysfs attribute
+  pm_qos_no_power_off under the device's power directory allowing user space to
+  change the value of the PM_QOS_FLAG_NO_POWER_OFF flag.
+
+void dev_pm_qos_hide_flags(device)
+  Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS
+  list of flags and remove sysfs attribute pm_qos_no_power_off from the device's
+  power directory.
+
+Notification mechanisms:
+
+The per-device PM QoS framework has a per-device notification tree.
+
+int dev_pm_qos_add_notifier(device, notifier, type):
+  Adds a notification callback function for the device for a particular request
+  type.
+
+  The callback is called when the aggregated value of the device constraints
+  list is changed.
+
+int dev_pm_qos_remove_notifier(device, notifier, type):
+  Removes the notification callback function for the device.
+
+
+Active state latency tolerance
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This device PM QoS type is used to support systems in which hardware may switch
+to energy-saving operation modes on the fly.  In those systems, if the operation
+mode chosen by the hardware attempts to save energy in an overly aggressive way,
+it may cause excess latencies to be visible to software, causing it to miss
+certain protocol requirements or target frame or sample rates etc.
+
+If there is a latency tolerance control mechanism for a given device available
+to software, the .set_latency_tolerance callback in that device's dev_pm_info
+structure should be populated.  The routine pointed to by it is should implement
+whatever is necessary to transfer the effective requirement value to the
+hardware.
+
+Whenever the effective latency tolerance changes for the device, its
+.set_latency_tolerance() callback will be executed and the effective value will
+be passed to it.  If that value is negative, which means that the list of
+latency tolerance requirements for the device is empty, the callback is expected
+to switch the underlying hardware latency tolerance control mechanism to an
+autonomous mode if available.  If that value is PM_QOS_LATENCY_ANY, in turn, and
+the hardware supports a special "no requirement" setting, the callback is
+expected to use it.  That allows software to prevent the hardware from
+automatically updating the device's latency tolerance in response to its power
+state changes (e.g. during transitions from D3cold to D0), which generally may
+be done in the autonomous latency tolerance control mode.
+
+If .set_latency_tolerance() is present for the device, sysfs attribute
+pm_qos_latency_tolerance_us will be present in the devivce's power directory.
+Then, user space can use that attribute to specify its latency tolerance
+requirement for the device, if any.  Writing "any" to it means "no requirement,
+but do not let the hardware control latency tolerance" and writing "auto" to it
+allows the hardware to be switched to the autonomous mode if there are no other
+requirements from the kernel side in the device's list.
+
+Kernel code can use the functions described above along with the
+DEV_PM_QOS_LATENCY_TOLERANCE device PM QoS type to add, remove and update
+latency tolerance requirements for devices.
diff --git a/Documentation/power/power_supply_class.rst b/Documentation/power/power_supply_class.rst
new file mode 100644
index 000000000..c04fabee0
--- /dev/null
+++ b/Documentation/power/power_supply_class.rst
@@ -0,0 +1,288 @@
+========================
+Linux power supply class
+========================
+
+Synopsis
+~~~~~~~~
+Power supply class used to represent battery, UPS, AC or DC power supply
+properties to user-space.
+
+It defines core set of attributes, which should be applicable to (almost)
+every power supply out there. Attributes are available via sysfs and uevent
+interfaces.
+
+Each attribute has well defined meaning, up to unit of measure used. While
+the attributes provided are believed to be universally applicable to any
+power supply, specific monitoring hardware may not be able to provide them
+all, so any of them may be skipped.
+
+Power supply class is extensible, and allows to define drivers own attributes.
+The core attribute set is subject to the standard Linux evolution (i.e.
+if it will be found that some attribute is applicable to many power supply
+types or their drivers, it can be added to the core set).
+
+It also integrates with LED framework, for the purpose of providing
+typically expected feedback of battery charging/fully charged status and
+AC/USB power supply online status. (Note that specific details of the
+indication (including whether to use it at all) are fully controllable by
+user and/or specific machine defaults, per design principles of LED
+framework).
+
+
+Attributes/properties
+~~~~~~~~~~~~~~~~~~~~~
+Power supply class has predefined set of attributes, this eliminates code
+duplication across drivers. Power supply class insist on reusing its
+predefined attributes *and* their units.
+
+So, userspace gets predictable set of attributes and their units for any
+kind of power supply, and can process/present them to a user in consistent
+manner. Results for different power supplies and machines are also directly
+comparable.
+
+See drivers/power/supply/ds2760_battery.c and drivers/power/supply/pda_power.c
+for the example how to declare and handle attributes.
+
+
+Units
+~~~~~
+Quoting include/linux/power_supply.h:
+
+  All voltages, currents, charges, energies, time and temperatures in µV,
+  µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
+  stated. It's driver's job to convert its raw values to units in which
+  this class operates.
+
+
+Attributes/properties detailed
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
++--------------------------------------------------------------------------+
+|               **Charge/Energy/Capacity - how to not confuse**            |
++--------------------------------------------------------------------------+
+| **Because both "charge" (µAh) and "energy" (µWh) represents "capacity"   |
+| of battery, this class distinguish these terms. Don't mix them!**        |
+|                                                                          |
+| - `CHARGE_*`                                                             |
+|	attributes represents capacity in µAh only.                        |
+| - `ENERGY_*`                                                             |
+|	attributes represents capacity in µWh only.                        |
+| - `CAPACITY`                                                             |
+|	attribute represents capacity in *percents*, from 0 to 100.        |
++--------------------------------------------------------------------------+
+
+Postfixes:
+
+_AVG
+  *hardware* averaged value, use it if your hardware is really able to
+  report averaged values.
+_NOW
+  momentary/instantaneous values.
+
+STATUS
+  this attribute represents operating status (charging, full,
+  discharging (i.e. powering a load), etc.). This corresponds to
+  `BATTERY_STATUS_*` values, as defined in battery.h.
+
+CHARGE_TYPE
+  batteries can typically charge at different rates.
+  This defines trickle and fast charges.  For batteries that
+  are already charged or discharging, 'n/a' can be displayed (or
+  'unknown', if the status is not known).
+
+AUTHENTIC
+  indicates the power supply (battery or charger) connected
+  to the platform is authentic(1) or non authentic(0).
+
+HEALTH
+  represents health of the battery, values corresponds to
+  POWER_SUPPLY_HEALTH_*, defined in battery.h.
+
+VOLTAGE_OCV
+  open circuit voltage of the battery.
+
+VOLTAGE_MAX_DESIGN, VOLTAGE_MIN_DESIGN
+  design values for maximal and minimal power supply voltages.
+  Maximal/minimal means values of voltages when battery considered
+  "full"/"empty" at normal conditions. Yes, there is no direct relation
+  between voltage and battery capacity, but some dumb
+  batteries use voltage for very approximated calculation of capacity.
+  Battery driver also can use this attribute just to inform userspace
+  about maximal and minimal voltage thresholds of a given battery.
+
+VOLTAGE_MAX, VOLTAGE_MIN
+  same as _DESIGN voltage values except that these ones should be used
+  if hardware could only guess (measure and retain) the thresholds of a
+  given power supply.
+
+VOLTAGE_BOOT
+  Reports the voltage measured during boot
+
+CURRENT_BOOT
+  Reports the current measured during boot
+
+CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN
+  design charge values, when battery considered full/empty.
+
+ENERGY_FULL_DESIGN, ENERGY_EMPTY_DESIGN
+  same as above but for energy.
+
+CHARGE_FULL, CHARGE_EMPTY
+  These attributes means "last remembered value of charge when battery
+  became full/empty". It also could mean "value of charge when battery
+  considered full/empty at given conditions (temperature, age)".
+  I.e. these attributes represents real thresholds, not design values.
+
+ENERGY_FULL, ENERGY_EMPTY
+  same as above but for energy.
+
+CHARGE_COUNTER
+  the current charge counter (in µAh).  This could easily
+  be negative; there is no empty or full value.  It is only useful for
+  relative, time-based measurements.
+
+PRECHARGE_CURRENT
+  the maximum charge current during precharge phase of charge cycle
+  (typically 20% of battery capacity).
+
+CHARGE_TERM_CURRENT
+  Charge termination current. The charge cycle terminates when battery
+  voltage is above recharge threshold, and charge current is below
+  this setting (typically 10% of battery capacity).
+
+CONSTANT_CHARGE_CURRENT
+  constant charge current programmed by charger.
+
+
+CONSTANT_CHARGE_CURRENT_MAX
+  maximum charge current supported by the power supply object.
+
+CONSTANT_CHARGE_VOLTAGE
+  constant charge voltage programmed by charger.
+CONSTANT_CHARGE_VOLTAGE_MAX
+  maximum charge voltage supported by the power supply object.
+
+INPUT_CURRENT_LIMIT
+  input current limit programmed by charger. Indicates
+  the current drawn from a charging source.
+INPUT_VOLTAGE_LIMIT
+  input voltage limit programmed by charger. Indicates
+  the voltage limit from a charging source.
+INPUT_POWER_LIMIT
+  input power limit programmed by charger. Indicates
+  the power limit from a charging source.
+
+CHARGE_CONTROL_LIMIT
+  current charge control limit setting
+CHARGE_CONTROL_LIMIT_MAX
+  maximum charge control limit setting
+
+CALIBRATE
+  battery or coulomb counter calibration status
+
+CAPACITY
+  capacity in percents.
+CAPACITY_ALERT_MIN
+  minimum capacity alert value in percents.
+CAPACITY_ALERT_MAX
+  maximum capacity alert value in percents.
+CAPACITY_LEVEL
+  capacity level. This corresponds to POWER_SUPPLY_CAPACITY_LEVEL_*.
+
+TEMP
+  temperature of the power supply.
+TEMP_ALERT_MIN
+  minimum battery temperature alert.
+TEMP_ALERT_MAX
+  maximum battery temperature alert.
+TEMP_AMBIENT
+  ambient temperature.
+TEMP_AMBIENT_ALERT_MIN
+  minimum ambient temperature alert.
+TEMP_AMBIENT_ALERT_MAX
+  maximum ambient temperature alert.
+TEMP_MIN
+  minimum operatable temperature
+TEMP_MAX
+  maximum operatable temperature
+
+TIME_TO_EMPTY
+  seconds left for battery to be considered empty
+  (i.e. while battery powers a load)
+TIME_TO_FULL
+  seconds left for battery to be considered full
+  (i.e. while battery is charging)
+
+
+Battery <-> external power supply interaction
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Often power supplies are acting as supplies and supplicants at the same
+time. Batteries are good example. So, batteries usually care if they're
+externally powered or not.
+
+For that case, power supply class implements notification mechanism for
+batteries.
+
+External power supply (AC) lists supplicants (batteries) names in
+"supplied_to" struct member, and each power_supply_changed() call
+issued by external power supply will notify supplicants via
+external_power_changed callback.
+
+
+Devicetree battery characteristics
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Drivers should call power_supply_get_battery_info() to obtain battery
+characteristics from a devicetree battery node, defined in
+Documentation/devicetree/bindings/power/supply/battery.yaml. This is
+implemented in drivers/power/supply/bq27xxx_battery.c.
+
+Properties in struct power_supply_battery_info and their counterparts in the
+battery node have names corresponding to elements in enum power_supply_property,
+for naming consistency between sysfs attributes and battery node properties.
+
+
+QA
+~~
+
+Q:
+   Where is POWER_SUPPLY_PROP_XYZ attribute?
+A:
+   If you cannot find attribute suitable for your driver needs, feel free
+   to add it and send patch along with your driver.
+
+   The attributes available currently are the ones currently provided by the
+   drivers written.
+
+   Good candidates to add in future: model/part#, cycle_time, manufacturer,
+   etc.
+
+
+Q:
+   I have some very specific attribute (e.g. battery color), should I add
+   this attribute to standard ones?
+A:
+   Most likely, no. Such attribute can be placed in the driver itself, if
+   it is useful. Of course, if the attribute in question applicable to
+   large set of batteries, provided by many drivers, and/or comes from
+   some general battery specification/standard, it may be a candidate to
+   be added to the core attribute set.
+
+
+Q:
+   Suppose, my battery monitoring chip/firmware does not provides capacity
+   in percents, but provides charge_{now,full,empty}. Should I calculate
+   percentage capacity manually, inside the driver, and register CAPACITY
+   attribute? The same question about time_to_empty/time_to_full.
+A:
+   Most likely, no. This class is designed to export properties which are
+   directly measurable by the specific hardware available.
+
+   Inferring not available properties using some heuristics or mathematical
+   model is not subject of work for a battery driver. Such functionality
+   should be factored out, and in fact, apm_power, the driver to serve
+   legacy APM API on top of power supply class, uses a simple heuristic of
+   approximating remaining battery capacity based on its charge, current,
+   voltage and so on. But full-fledged battery model is likely not subject
+   for kernel at all, as it would require floating point calculation to deal
+   with things like differential equations and Kalman filters. This is
+   better be handled by batteryd/libbattery, yet to be written.
diff --git a/Documentation/power/powercap/dtpm.rst b/Documentation/power/powercap/dtpm.rst
new file mode 100644
index 000000000..a38dee3d8
--- /dev/null
+++ b/Documentation/power/powercap/dtpm.rst
@@ -0,0 +1,212 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================================
+Dynamic Thermal Power Management framework
+==========================================
+
+On the embedded world, the complexity of the SoC leads to an
+increasing number of hotspots which need to be monitored and mitigated
+as a whole in order to prevent the temperature to go above the
+normative and legally stated 'skin temperature'.
+
+Another aspect is to sustain the performance for a given power budget,
+for example virtual reality where the user can feel dizziness if the
+performance is capped while a big CPU is processing something else. Or
+reduce the battery charging because the dissipated power is too high
+compared with the power consumed by other devices.
+
+The user space is the most adequate place to dynamically act on the
+different devices by limiting their power given an application
+profile: it has the knowledge of the platform.
+
+The Dynamic Thermal Power Management (DTPM) is a technique acting on
+the device power by limiting and/or balancing a power budget among
+different devices.
+
+The DTPM framework provides an unified interface to act on the
+device power.
+
+Overview
+========
+
+The DTPM framework relies on the powercap framework to create the
+powercap entries in the sysfs directory and implement the backend
+driver to do the connection with the power manageable device.
+
+The DTPM is a tree representation describing the power constraints
+shared between devices, not their physical positions.
+
+The nodes of the tree are a virtual description aggregating the power
+characteristics of the children nodes and their power limitations.
+
+The leaves of the tree are the real power manageable devices.
+
+For instance::
+
+  SoC
+   |
+   `-- pkg
+	|
+	|-- pd0 (cpu0-3)
+	|
+	`-- pd1 (cpu4-5)
+
+The pkg power will be the sum of pd0 and pd1 power numbers::
+
+  SoC (400mW - 3100mW)
+   |
+   `-- pkg (400mW - 3100mW)
+	|
+	|-- pd0 (100mW - 700mW)
+	|
+	`-- pd1 (300mW - 2400mW)
+
+When the nodes are inserted in the tree, their power characteristics are propagated to the parents::
+
+  SoC (600mW - 5900mW)
+   |
+   |-- pkg (400mW - 3100mW)
+   |    |
+   |    |-- pd0 (100mW - 700mW)
+   |    |
+   |    `-- pd1 (300mW - 2400mW)
+   |
+   `-- pd2 (200mW - 2800mW)
+
+Each node have a weight on a 2^10 basis reflecting the percentage of power consumption along the siblings::
+
+  SoC (w=1024)
+   |
+   |-- pkg (w=538)
+   |    |
+   |    |-- pd0 (w=231)
+   |    |
+   |    `-- pd1 (w=794)
+   |
+   `-- pd2 (w=486)
+
+   Note the sum of weights at the same level are equal to 1024.
+
+When a power limitation is applied to a node, then it is distributed along the children given their weights. For example, if we set a power limitation of 3200mW at the 'SoC' root node, the resulting tree will be::
+
+  SoC (w=1024) <--- power_limit = 3200mW
+   |
+   |-- pkg (w=538) --> power_limit = 1681mW
+   |    |
+   |    |-- pd0 (w=231) --> power_limit = 378mW
+   |    |
+   |    `-- pd1 (w=794) --> power_limit = 1303mW
+   |
+   `-- pd2 (w=486) --> power_limit = 1519mW
+
+
+Flat description
+----------------
+
+A root node is created and it is the parent of all the nodes. This
+description is the simplest one and it is supposed to give to user
+space a flat representation of all the devices supporting the power
+limitation without any power limitation distribution.
+
+Hierarchical description
+------------------------
+
+The different devices supporting the power limitation are represented
+hierarchically. There is one root node, all intermediate nodes are
+grouping the child nodes which can be intermediate nodes also or real
+devices.
+
+The intermediate nodes aggregate the power information and allows to
+set the power limit given the weight of the nodes.
+
+User space API
+==============
+
+As stated in the overview, the DTPM framework is built on top of the
+powercap framework. Thus the sysfs interface is the same, please refer
+to the powercap documentation for further details.
+
+ * power_uw: Instantaneous power consumption. If the node is an
+   intermediate node, then the power consumption will be the sum of all
+   children power consumption.
+
+ * max_power_range_uw: The power range resulting of the maximum power
+   minus the minimum power.
+
+ * name: The name of the node. This is implementation dependent. Even
+   if it is not recommended for the user space, several nodes can have
+   the same name.
+
+ * constraint_X_name: The name of the constraint.
+
+ * constraint_X_max_power_uw: The maximum power limit to be applicable
+   to the node.
+
+ * constraint_X_power_limit_uw: The power limit to be applied to the
+   node. If the value contained in constraint_X_max_power_uw is set,
+   the constraint will be removed.
+
+ * constraint_X_time_window_us: The meaning of this file will depend
+   on the constraint number.
+
+Constraints
+-----------
+
+ * Constraint 0: The power limitation is immediately applied, without
+   limitation in time.
+
+Kernel API
+==========
+
+Overview
+--------
+
+The DTPM framework has no power limiting backend support. It is
+generic and provides a set of API to let the different drivers to
+implement the backend part for the power limitation and create the
+power constraints tree.
+
+It is up to the platform to provide the initialization function to
+allocate and link the different nodes of the tree.
+
+A special macro has the role of declaring a node and the corresponding
+initialization function via a description structure. This one contains
+an optional parent field allowing to hook different devices to an
+already existing tree at boot time.
+
+For instance::
+
+	struct dtpm_descr my_descr = {
+		.name = "my_name",
+		.init = my_init_func,
+	};
+
+	DTPM_DECLARE(my_descr);
+
+The nodes of the DTPM tree are described with dtpm structure. The
+steps to add a new power limitable device is done in three steps:
+
+ * Allocate the dtpm node
+ * Set the power number of the dtpm node
+ * Register the dtpm node
+
+The registration of the dtpm node is done with the powercap
+ops. Basically, it must implements the callbacks to get and set the
+power and the limit.
+
+Alternatively, if the node to be inserted is an intermediate one, then
+a simple function to insert it as a future parent is available.
+
+If a device has its power characteristics changing, then the tree must
+be updated with the new power numbers and weights.
+
+Nomenclature
+------------
+
+ * dtpm_alloc() : Allocate and initialize a dtpm structure
+
+ * dtpm_register() : Add the dtpm node to the tree
+
+ * dtpm_unregister() : Remove the dtpm node from the tree
+
+ * dtpm_update_power() : Update the power characteristics of the dtpm node
diff --git a/Documentation/power/powercap/powercap.rst b/Documentation/power/powercap/powercap.rst
new file mode 100644
index 000000000..e75d12596
--- /dev/null
+++ b/Documentation/power/powercap/powercap.rst
@@ -0,0 +1,262 @@
+=======================
+Power Capping Framework
+=======================
+
+The power capping framework provides a consistent interface between the kernel
+and the user space that allows power capping drivers to expose the settings to
+user space in a uniform way.
+
+Terminology
+===========
+
+The framework exposes power capping devices to user space via sysfs in the
+form of a tree of objects. The objects at the root level of the tree represent
+'control types', which correspond to different methods of power capping.  For
+example, the intel-rapl control type represents the Intel "Running Average
+Power Limit" (RAPL) technology, whereas the 'idle-injection' control type
+corresponds to the use of idle injection for controlling power.
+
+Power zones represent different parts of the system, which can be controlled and
+monitored using the power capping method determined by the control type the
+given zone belongs to. They each contain attributes for monitoring power, as
+well as controls represented in the form of power constraints.  If the parts of
+the system represented by different power zones are hierarchical (that is, one
+bigger part consists of multiple smaller parts that each have their own power
+controls), those power zones may also be organized in a hierarchy with one
+parent power zone containing multiple subzones and so on to reflect the power
+control topology of the system.  In that case, it is possible to apply power
+capping to a set of devices together using the parent power zone and if more
+fine grained control is required, it can be applied through the subzones.
+
+
+Example sysfs interface tree::
+
+  /sys/devices/virtual/powercap
+  └──intel-rapl
+      ├──intel-rapl:0
+      │   ├──constraint_0_name
+      │   ├──constraint_0_power_limit_uw
+      │   ├──constraint_0_time_window_us
+      │   ├──constraint_1_name
+      │   ├──constraint_1_power_limit_uw
+      │   ├──constraint_1_time_window_us
+      │   ├──device -> ../../intel-rapl
+      │   ├──energy_uj
+      │   ├──intel-rapl:0:0
+      │   │   ├──constraint_0_name
+      │   │   ├──constraint_0_power_limit_uw
+      │   │   ├──constraint_0_time_window_us
+      │   │   ├──constraint_1_name
+      │   │   ├──constraint_1_power_limit_uw
+      │   │   ├──constraint_1_time_window_us
+      │   │   ├──device -> ../../intel-rapl:0
+      │   │   ├──energy_uj
+      │   │   ├──max_energy_range_uj
+      │   │   ├──name
+      │   │   ├──enabled
+      │   │   ├──power
+      │   │   │   ├──async
+      │   │   │   []
+      │   │   ├──subsystem -> ../../../../../../class/power_cap
+      │   │   └──uevent
+      │   ├──intel-rapl:0:1
+      │   │   ├──constraint_0_name
+      │   │   ├──constraint_0_power_limit_uw
+      │   │   ├──constraint_0_time_window_us
+      │   │   ├──constraint_1_name
+      │   │   ├──constraint_1_power_limit_uw
+      │   │   ├──constraint_1_time_window_us
+      │   │   ├──device -> ../../intel-rapl:0
+      │   │   ├──energy_uj
+      │   │   ├──max_energy_range_uj
+      │   │   ├──name
+      │   │   ├──enabled
+      │   │   ├──power
+      │   │   │   ├──async
+      │   │   │   []
+      │   │   ├──subsystem -> ../../../../../../class/power_cap
+      │   │   └──uevent
+      │   ├──max_energy_range_uj
+      │   ├──max_power_range_uw
+      │   ├──name
+      │   ├──enabled
+      │   ├──power
+      │   │   ├──async
+      │   │   []
+      │   ├──subsystem -> ../../../../../class/power_cap
+      │   ├──enabled
+      │   ├──uevent
+      ├──intel-rapl:1
+      │   ├──constraint_0_name
+      │   ├──constraint_0_power_limit_uw
+      │   ├──constraint_0_time_window_us
+      │   ├──constraint_1_name
+      │   ├──constraint_1_power_limit_uw
+      │   ├──constraint_1_time_window_us
+      │   ├──device -> ../../intel-rapl
+      │   ├──energy_uj
+      │   ├──intel-rapl:1:0
+      │   │   ├──constraint_0_name
+      │   │   ├──constraint_0_power_limit_uw
+      │   │   ├──constraint_0_time_window_us
+      │   │   ├──constraint_1_name
+      │   │   ├──constraint_1_power_limit_uw
+      │   │   ├──constraint_1_time_window_us
+      │   │   ├──device -> ../../intel-rapl:1
+      │   │   ├──energy_uj
+      │   │   ├──max_energy_range_uj
+      │   │   ├──name
+      │   │   ├──enabled
+      │   │   ├──power
+      │   │   │   ├──async
+      │   │   │   []
+      │   │   ├──subsystem -> ../../../../../../class/power_cap
+      │   │   └──uevent
+      │   ├──intel-rapl:1:1
+      │   │   ├──constraint_0_name
+      │   │   ├──constraint_0_power_limit_uw
+      │   │   ├──constraint_0_time_window_us
+      │   │   ├──constraint_1_name
+      │   │   ├──constraint_1_power_limit_uw
+      │   │   ├──constraint_1_time_window_us
+      │   │   ├──device -> ../../intel-rapl:1
+      │   │   ├──energy_uj
+      │   │   ├──max_energy_range_uj
+      │   │   ├──name
+      │   │   ├──enabled
+      │   │   ├──power
+      │   │   │   ├──async
+      │   │   │   []
+      │   │   ├──subsystem -> ../../../../../../class/power_cap
+      │   │   └──uevent
+      │   ├──max_energy_range_uj
+      │   ├──max_power_range_uw
+      │   ├──name
+      │   ├──enabled
+      │   ├──power
+      │   │   ├──async
+      │   │   []
+      │   ├──subsystem -> ../../../../../class/power_cap
+      │   ├──uevent
+      ├──power
+      │   ├──async
+      │   []
+      ├──subsystem -> ../../../../class/power_cap
+      ├──enabled
+      └──uevent
+
+The above example illustrates a case in which the Intel RAPL technology,
+available in Intel® IA-64 and IA-32 Processor Architectures, is used. There is one
+control type called intel-rapl which contains two power zones, intel-rapl:0 and
+intel-rapl:1, representing CPU packages.  Each of these power zones contains
+two subzones, intel-rapl:j:0 and intel-rapl:j:1 (j = 0, 1), representing the
+"core" and the "uncore" parts of the given CPU package, respectively.  All of
+the zones and subzones contain energy monitoring attributes (energy_uj,
+max_energy_range_uj) and constraint attributes (constraint_*) allowing controls
+to be applied (the constraints in the 'package' power zones apply to the whole
+CPU packages and the subzone constraints only apply to the respective parts of
+the given package individually). Since Intel RAPL doesn't provide instantaneous
+power value, there is no power_uw attribute.
+
+In addition to that, each power zone contains a name attribute, allowing the
+part of the system represented by that zone to be identified.
+For example::
+
+	cat /sys/class/power_cap/intel-rapl/intel-rapl:0/name
+
+package-0
+---------
+
+Depending on different power zones, the Intel RAPL technology allows
+one or multiple constraints like short term, long term and peak power,
+with different time windows to be applied to each power zone.
+All the zones contain attributes representing the constraint names,
+power limits and the sizes of the time windows. Note that time window
+is not applicable to peak power. Here, constraint_j_* attributes
+correspond to the jth constraint (j = 0,1,2).
+
+For example::
+
+	constraint_0_name
+	constraint_0_power_limit_uw
+	constraint_0_time_window_us
+	constraint_1_name
+	constraint_1_power_limit_uw
+	constraint_1_time_window_us
+	constraint_2_name
+	constraint_2_power_limit_uw
+	constraint_2_time_window_us
+
+Power Zone Attributes
+=====================
+
+Monitoring attributes
+---------------------
+
+energy_uj (rw)
+	Current energy counter in micro joules. Write "0" to reset.
+	If the counter can not be reset, then this attribute is read only.
+
+max_energy_range_uj (ro)
+	Range of the above energy counter in micro-joules.
+
+power_uw (ro)
+	Current power in micro watts.
+
+max_power_range_uw (ro)
+	Range of the above power value in micro-watts.
+
+name (ro)
+	Name of this power zone.
+
+It is possible that some domains have both power ranges and energy counter ranges;
+however, only one is mandatory.
+
+Constraints
+-----------
+
+constraint_X_power_limit_uw (rw)
+	Power limit in micro watts, which should be applicable for the
+	time window specified by "constraint_X_time_window_us".
+
+constraint_X_time_window_us (rw)
+	Time window in micro seconds.
+
+constraint_X_name (ro)
+	An optional name of the constraint
+
+constraint_X_max_power_uw(ro)
+	Maximum allowed power in micro watts.
+
+constraint_X_min_power_uw(ro)
+	Minimum allowed power in micro watts.
+
+constraint_X_max_time_window_us(ro)
+	Maximum allowed time window in micro seconds.
+
+constraint_X_min_time_window_us(ro)
+	Minimum allowed time window in micro seconds.
+
+Except power_limit_uw and time_window_us other fields are optional.
+
+Common zone and control type attributes
+---------------------------------------
+
+enabled (rw): Enable/Disable controls at zone level or for all zones using
+a control type.
+
+Power Cap Client Driver Interface
+=================================
+
+The API summary:
+
+Call powercap_register_control_type() to register control type object.
+Call powercap_register_zone() to register a power zone (under a given
+control type), either as a top-level power zone or as a subzone of another
+power zone registered earlier.
+The number of constraints in a power zone and the corresponding callbacks have
+to be defined prior to calling powercap_register_zone() to register that zone.
+
+To Free a power zone call powercap_unregister_zone().
+To free a control type object call powercap_unregister_control_type().
+Detailed API can be generated using kernel-doc on include/linux/powercap.h.
diff --git a/Documentation/power/regulator/consumer.rst b/Documentation/power/regulator/consumer.rst
new file mode 100644
index 000000000..0cd8cc127
--- /dev/null
+++ b/Documentation/power/regulator/consumer.rst
@@ -0,0 +1,229 @@
+===================================
+Regulator Consumer Driver Interface
+===================================
+
+This text describes the regulator interface for consumer device drivers.
+Please see overview.txt for a description of the terms used in this text.
+
+
+1. Consumer Regulator Access (static & dynamic drivers)
+=======================================================
+
+A consumer driver can get access to its supply regulator by calling ::
+
+	regulator = regulator_get(dev, "Vcc");
+
+The consumer passes in its struct device pointer and power supply ID. The core
+then finds the correct regulator by consulting a machine specific lookup table.
+If the lookup is successful then this call will return a pointer to the struct
+regulator that supplies this consumer.
+
+To release the regulator the consumer driver should call ::
+
+	regulator_put(regulator);
+
+Consumers can be supplied by more than one regulator e.g. codec consumer with
+analog and digital supplies ::
+
+	digital = regulator_get(dev, "Vcc");  /* digital core */
+	analog = regulator_get(dev, "Avdd");  /* analog */
+
+The regulator access functions regulator_get() and regulator_put() will
+usually be called in your device drivers probe() and remove() respectively.
+
+
+2. Regulator Output Enable & Disable (static & dynamic drivers)
+===============================================================
+
+
+A consumer can enable its power supply by calling::
+
+	int regulator_enable(regulator);
+
+NOTE:
+  The supply may already be enabled before regulator_enabled() is called.
+  This may happen if the consumer shares the regulator or the regulator has been
+  previously enabled by bootloader or kernel board initialization code.
+
+A consumer can determine if a regulator is enabled by calling::
+
+	int regulator_is_enabled(regulator);
+
+This will return > zero when the regulator is enabled.
+
+
+A consumer can disable its supply when no longer needed by calling::
+
+	int regulator_disable(regulator);
+
+NOTE:
+  This may not disable the supply if it's shared with other consumers. The
+  regulator will only be disabled when the enabled reference count is zero.
+
+Finally, a regulator can be forcefully disabled in the case of an emergency::
+
+	int regulator_force_disable(regulator);
+
+NOTE:
+  this will immediately and forcefully shutdown the regulator output. All
+  consumers will be powered off.
+
+
+3. Regulator Voltage Control & Status (dynamic drivers)
+=======================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+voltage to match system operating points. e.g. CPUfreq drivers can scale
+voltage along with frequency to save power, SD drivers may need to select the
+correct card voltage, etc.
+
+Consumers can control their supply voltage by calling::
+
+	int regulator_set_voltage(regulator, min_uV, max_uV);
+
+Where min_uV and max_uV are the minimum and maximum acceptable voltages in
+microvolts.
+
+NOTE: this can be called when the regulator is enabled or disabled. If called
+when enabled, then the voltage changes instantly, otherwise the voltage
+configuration changes and the voltage is physically set when the regulator is
+next enabled.
+
+The regulators configured voltage output can be found by calling::
+
+	int regulator_get_voltage(regulator);
+
+NOTE:
+  get_voltage() will return the configured output voltage whether the
+  regulator is enabled or disabled and should NOT be used to determine regulator
+  output state. However this can be used in conjunction with is_enabled() to
+  determine the regulator physical output voltage.
+
+
+4. Regulator Current Limit Control & Status (dynamic drivers)
+=============================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+current limit to match system operating points. e.g. LCD backlight driver can
+change the current limit to vary the backlight brightness, USB drivers may want
+to set the limit to 500mA when supplying power.
+
+Consumers can control their supply current limit by calling::
+
+	int regulator_set_current_limit(regulator, min_uA, max_uA);
+
+Where min_uA and max_uA are the minimum and maximum acceptable current limit in
+microamps.
+
+NOTE:
+  this can be called when the regulator is enabled or disabled. If called
+  when enabled, then the current limit changes instantly, otherwise the current
+  limit configuration changes and the current limit is physically set when the
+  regulator is next enabled.
+
+A regulators current limit can be found by calling::
+
+	int regulator_get_current_limit(regulator);
+
+NOTE:
+  get_current_limit() will return the current limit whether the regulator
+  is enabled or disabled and should not be used to determine regulator current
+  load.
+
+
+5. Regulator Operating Mode Control & Status (dynamic drivers)
+==============================================================
+
+Some consumers can further save system power by changing the operating mode of
+their supply regulator to be more efficient when the consumers operating state
+changes. e.g. consumer driver is idle and subsequently draws less current
+
+Regulator operating mode can be changed indirectly or directly.
+
+Indirect operating mode control.
+--------------------------------
+Consumer drivers can request a change in their supply regulator operating mode
+by calling::
+
+	int regulator_set_load(struct regulator *regulator, int load_uA);
+
+This will cause the core to recalculate the total load on the regulator (based
+on all its consumers) and change operating mode (if necessary and permitted)
+to best match the current operating load.
+
+The load_uA value can be determined from the consumer's datasheet. e.g. most
+datasheets have tables showing the maximum current consumed in certain
+situations.
+
+Most consumers will use indirect operating mode control since they have no
+knowledge of the regulator or whether the regulator is shared with other
+consumers.
+
+Direct operating mode control.
+------------------------------
+
+Bespoke or tightly coupled drivers may want to directly control regulator
+operating mode depending on their operating point. This can be achieved by
+calling::
+
+	int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+	unsigned int regulator_get_mode(struct regulator *regulator);
+
+Direct mode will only be used by consumers that *know* about the regulator and
+are not sharing the regulator with other consumers.
+
+
+6. Regulator Events
+===================
+
+Regulators can notify consumers of external events. Events could be received by
+consumers under regulator stress or failure conditions.
+
+Consumers can register interest in regulator events by calling::
+
+	int regulator_register_notifier(struct regulator *regulator,
+					struct notifier_block *nb);
+
+Consumers can unregister interest by calling::
+
+	int regulator_unregister_notifier(struct regulator *regulator,
+					  struct notifier_block *nb);
+
+Regulators use the kernel notifier framework to send event to their interested
+consumers.
+
+7. Regulator Direct Register Access
+===================================
+
+Some kinds of power management hardware or firmware are designed such that
+they need to do low-level hardware access to regulators, with no involvement
+from the kernel. Examples of such devices are:
+
+- clocksource with a voltage-controlled oscillator and control logic to change
+  the supply voltage over I2C to achieve a desired output clock rate
+- thermal management firmware that can issue an arbitrary I2C transaction to
+  perform system poweroff during overtemperature conditions
+
+To set up such a device/firmware, various parameters like I2C address of the
+regulator, addresses of various regulator registers etc. need to be configured
+to it. The regulator framework provides the following helpers for querying
+these details.
+
+Bus-specific details, like I2C addresses or transfer rates are handled by the
+regmap framework. To get the regulator's regmap (if supported), use::
+
+	struct regmap *regulator_get_regmap(struct regulator *regulator);
+
+To obtain the hardware register offset and bitmask for the regulator's voltage
+selector register, use::
+
+	int regulator_get_hardware_vsel_register(struct regulator *regulator,
+						 unsigned *vsel_reg,
+						 unsigned *vsel_mask);
+
+To convert a regulator framework voltage selector code (used by
+regulator_list_voltage) to a hardware-specific voltage selector that can be
+directly written to the voltage selector register, use::
+
+	int regulator_list_hardware_vsel(struct regulator *regulator,
+					 unsigned selector);
diff --git a/Documentation/power/regulator/design.rst b/Documentation/power/regulator/design.rst
new file mode 100644
index 000000000..3b09c6841
--- /dev/null
+++ b/Documentation/power/regulator/design.rst
@@ -0,0 +1,38 @@
+==========================
+Regulator API design notes
+==========================
+
+This document provides a brief, partially structured, overview of some
+of the design considerations which impact the regulator API design.
+
+Safety
+------
+
+ - Errors in regulator configuration can have very serious consequences
+   for the system, potentially including lasting hardware damage.
+ - It is not possible to automatically determine the power configuration
+   of the system - software-equivalent variants of the same chip may
+   have different power requirements, and not all components with power
+   requirements are visible to software.
+
+.. note::
+
+     The API should make no changes to the hardware state unless it has
+     specific knowledge that these changes are safe to perform on this
+     particular system.
+
+Consumer use cases
+------------------
+
+ - The overwhelming majority of devices in a system will have no
+   requirement to do any runtime configuration of their power beyond
+   being able to turn it on or off.
+
+ - Many of the power supplies in the system will be shared between many
+   different consumers.
+
+.. note::
+
+     The consumer API should be structured so that these use cases are
+     very easy to handle and so that consumers will work with shared
+     supplies without any additional effort.
diff --git a/Documentation/power/regulator/machine.rst b/Documentation/power/regulator/machine.rst
new file mode 100644
index 000000000..22fffefaa
--- /dev/null
+++ b/Documentation/power/regulator/machine.rst
@@ -0,0 +1,97 @@
+==================================
+Regulator Machine Driver Interface
+==================================
+
+The regulator machine driver interface is intended for board/machine specific
+initialisation code to configure the regulator subsystem.
+
+Consider the following machine::
+
+  Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+               |
+               +-> [Consumer B @ 3.3V]
+
+The drivers for consumers A & B must be mapped to the correct regulator in
+order to control their power supplies. This mapping can be achieved in machine
+initialisation code by creating a struct regulator_consumer_supply for
+each regulator::
+
+  struct regulator_consumer_supply {
+	const char *dev_name;	/* consumer dev_name() */
+	const char *supply;	/* consumer supply - e.g. "vcc" */
+  };
+
+e.g. for the machine above::
+
+  static struct regulator_consumer_supply regulator1_consumers[] = {
+	REGULATOR_SUPPLY("Vcc", "consumer B"),
+  };
+
+  static struct regulator_consumer_supply regulator2_consumers[] = {
+	REGULATOR_SUPPLY("Vcc", "consumer A"),
+  };
+
+This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2
+to the 'Vcc' supply for Consumer A.
+
+Constraints can now be registered by defining a struct regulator_init_data
+for each regulator power domain. This structure also maps the consumers
+to their supply regulators::
+
+  static struct regulator_init_data regulator1_data = {
+	.constraints = {
+		.name = "Regulator-1",
+		.min_uV = 3300000,
+		.max_uV = 3300000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(regulator1_consumers),
+	.consumer_supplies = regulator1_consumers,
+  };
+
+The name field should be set to something that is usefully descriptive
+for the board for configuration of supplies for other regulators and
+for use in logging and other diagnostic output.  Normally the name
+used for the supply rail in the schematic is a good choice.  If no
+name is provided then the subsystem will choose one.
+
+Regulator-1 supplies power to Regulator-2. This relationship must be registered
+with the core so that Regulator-1 is also enabled when Consumer A enables its
+supply (Regulator-2). The supply regulator is set by the supply_regulator
+field below and co::
+
+  static struct regulator_init_data regulator2_data = {
+	.supply_regulator = "Regulator-1",
+	.constraints = {
+		.min_uV = 1800000,
+		.max_uV = 2000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(regulator2_consumers),
+	.consumer_supplies = regulator2_consumers,
+  };
+
+Finally the regulator devices must be registered in the usual manner::
+
+  static struct platform_device regulator_devices[] = {
+	{
+		.name = "regulator",
+		.id = DCDC_1,
+		.dev = {
+			.platform_data = &regulator1_data,
+		},
+	},
+	{
+		.name = "regulator",
+		.id = DCDC_2,
+		.dev = {
+			.platform_data = &regulator2_data,
+		},
+	},
+  };
+  /* register regulator 1 device */
+  platform_device_register(&regulator_devices[0]);
+
+  /* register regulator 2 device */
+  platform_device_register(&regulator_devices[1]);
diff --git a/Documentation/power/regulator/overview.rst b/Documentation/power/regulator/overview.rst
new file mode 100644
index 000000000..ee494c70a
--- /dev/null
+++ b/Documentation/power/regulator/overview.rst
@@ -0,0 +1,178 @@
+=============================================
+Linux voltage and current regulator framework
+=============================================
+
+About
+=====
+
+This framework is designed to provide a standard kernel interface to control
+voltage and current regulators.
+
+The intention is to allow systems to dynamically control regulator power output
+in order to save power and prolong battery life. This applies to both voltage
+regulators (where voltage output is controllable) and current sinks (where
+current limit is controllable).
+
+(C) 2008  Wolfson Microelectronics PLC.
+
+Author: Liam Girdwood <lrg@slimlogic.co.uk>
+
+
+Nomenclature
+============
+
+Some terms used in this document:
+
+  - Regulator
+                 - Electronic device that supplies power to other devices.
+                   Most regulators can enable and disable their output while
+                   some can control their output voltage and or current.
+
+                   Input Voltage -> Regulator -> Output Voltage
+
+
+  - PMIC
+                 - Power Management IC. An IC that contains numerous
+                   regulators and often contains other subsystems.
+
+
+  - Consumer
+                 - Electronic device that is supplied power by a regulator.
+                   Consumers can be classified into two types:-
+
+                   Static: consumer does not change its supply voltage or
+                   current limit. It only needs to enable or disable its
+                   power supply. Its supply voltage is set by the hardware,
+                   bootloader, firmware or kernel board initialisation code.
+
+                   Dynamic: consumer needs to change its supply voltage or
+                   current limit to meet operation demands.
+
+
+  - Power Domain
+                 - Electronic circuit that is supplied its input power by the
+                   output power of a regulator, switch or by another power
+                   domain.
+
+                   The supply regulator may be behind a switch(s). i.e.::
+
+                     Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
+                                |             |
+                                |             +-> [Consumer B], [Consumer C]
+                                |
+                                +-> [Consumer D], [Consumer E]
+
+                   That is one regulator and three power domains:
+
+                   - Domain 1: Switch-1, Consumers D & E.
+                   - Domain 2: Switch-2, Consumers B & C.
+                   - Domain 3: Consumer A.
+
+                   and this represents a "supplies" relationship:
+
+                   Domain-1 --> Domain-2 --> Domain-3.
+
+                   A power domain may have regulators that are supplied power
+                   by other regulators. i.e.::
+
+                     Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
+                                  |
+                                  +-> [Consumer B]
+
+                   This gives us two regulators and two power domains:
+
+                   - Domain 1: Regulator-2, Consumer B.
+                   - Domain 2: Consumer A.
+
+                   and a "supplies" relationship:
+
+                   Domain-1 --> Domain-2
+
+
+  - Constraints
+                 - Constraints are used to define power levels for performance
+                   and hardware protection. Constraints exist at three levels:
+
+                   Regulator Level: This is defined by the regulator hardware
+                   operating parameters and is specified in the regulator
+                   datasheet. i.e.
+
+                     - voltage output is in the range 800mV -> 3500mV.
+                     - regulator current output limit is 20mA @ 5V but is
+                       10mA @ 10V.
+
+                   Power Domain Level: This is defined in software by kernel
+                   level board initialisation code. It is used to constrain a
+                   power domain to a particular power range. i.e.
+
+                     - Domain-1 voltage is 3300mV
+                     - Domain-2 voltage is 1400mV -> 1600mV
+                     - Domain-3 current limit is 0mA -> 20mA.
+
+                   Consumer Level: This is defined by consumer drivers
+                   dynamically setting voltage or current limit levels.
+
+                   e.g. a consumer backlight driver asks for a current increase
+                   from 5mA to 10mA to increase LCD illumination. This passes
+                   to through the levels as follows :-
+
+                   Consumer: need to increase LCD brightness. Lookup and
+                   request next current mA value in brightness table (the
+                   consumer driver could be used on several different
+                   personalities based upon the same reference device).
+
+                   Power Domain: is the new current limit within the domain
+                   operating limits for this domain and system state (e.g.
+                   battery power, USB power)
+
+                   Regulator Domains: is the new current limit within the
+                   regulator operating parameters for input/output voltage.
+
+                   If the regulator request passes all the constraint tests
+                   then the new regulator value is applied.
+
+
+Design
+======
+
+The framework is designed and targeted at SoC based devices but may also be
+relevant to non SoC devices and is split into the following four interfaces:-
+
+
+   1. Consumer driver interface.
+
+      This uses a similar API to the kernel clock interface in that consumer
+      drivers can get and put a regulator (like they can with clocks atm) and
+      get/set voltage, current limit, mode, enable and disable. This should
+      allow consumers complete control over their supply voltage and current
+      limit. This also compiles out if not in use so drivers can be reused in
+      systems with no regulator based power control.
+
+        See Documentation/power/regulator/consumer.rst
+
+   2. Regulator driver interface.
+
+      This allows regulator drivers to register their regulators and provide
+      operations to the core. It also has a notifier call chain for propagating
+      regulator events to clients.
+
+        See Documentation/power/regulator/regulator.rst
+
+   3. Machine interface.
+
+      This interface is for machine specific code and allows the creation of
+      voltage/current domains (with constraints) for each regulator. It can
+      provide regulator constraints that will prevent device damage through
+      overvoltage or overcurrent caused by buggy client drivers. It also
+      allows the creation of a regulator tree whereby some regulators are
+      supplied by others (similar to a clock tree).
+
+        See Documentation/power/regulator/machine.rst
+
+   4. Userspace ABI.
+
+      The framework also exports a lot of useful voltage/current/opmode data to
+      userspace via sysfs. This could be used to help monitor device power
+      consumption and status.
+
+        See Documentation/ABI/testing/sysfs-class-regulator
diff --git a/Documentation/power/regulator/regulator.rst b/Documentation/power/regulator/regulator.rst
new file mode 100644
index 000000000..794b3256f
--- /dev/null
+++ b/Documentation/power/regulator/regulator.rst
@@ -0,0 +1,32 @@
+==========================
+Regulator Driver Interface
+==========================
+
+The regulator driver interface is relatively simple and designed to allow
+regulator drivers to register their services with the core framework.
+
+
+Registration
+============
+
+Drivers can register a regulator by calling::
+
+  struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+					   const struct regulator_config *config);
+
+This will register the regulator's capabilities and operations to the regulator
+core.
+
+Regulators can be unregistered by calling::
+
+  void regulator_unregister(struct regulator_dev *rdev);
+
+
+Regulator Events
+================
+
+Regulators can send events (e.g. overtemperature, undervoltage, etc) to
+consumer drivers by calling::
+
+  int regulator_notifier_call_chain(struct regulator_dev *rdev,
+				    unsigned long event, void *data);
diff --git a/Documentation/power/runtime_pm.rst b/Documentation/power/runtime_pm.rst
new file mode 100644
index 000000000..65b86e487
--- /dev/null
+++ b/Documentation/power/runtime_pm.rst
@@ -0,0 +1,969 @@
+==================================================
+Runtime Power Management Framework for I/O Devices
+==================================================
+
+(C) 2009-2011 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+
+(C) 2010 Alan Stern <stern@rowland.harvard.edu>
+
+(C) 2014 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+1. Introduction
+===============
+
+Support for runtime power management (runtime PM) of I/O devices is provided
+at the power management core (PM core) level by means of:
+
+* The power management workqueue pm_wq in which bus types and device drivers can
+  put their PM-related work items.  It is strongly recommended that pm_wq be
+  used for queuing all work items related to runtime PM, because this allows
+  them to be synchronized with system-wide power transitions (suspend to RAM,
+  hibernation and resume from system sleep states).  pm_wq is declared in
+  include/linux/pm_runtime.h and defined in kernel/power/main.c.
+
+* A number of runtime PM fields in the 'power' member of 'struct device' (which
+  is of the type 'struct dev_pm_info', defined in include/linux/pm.h) that can
+  be used for synchronizing runtime PM operations with one another.
+
+* Three device runtime PM callbacks in 'struct dev_pm_ops' (defined in
+  include/linux/pm.h).
+
+* A set of helper functions defined in drivers/base/power/runtime.c that can be
+  used for carrying out runtime PM operations in such a way that the
+  synchronization between them is taken care of by the PM core.  Bus types and
+  device drivers are encouraged to use these functions.
+
+The runtime PM callbacks present in 'struct dev_pm_ops', the device runtime PM
+fields of 'struct dev_pm_info' and the core helper functions provided for
+runtime PM are described below.
+
+2. Device Runtime PM Callbacks
+==============================
+
+There are three device runtime PM callbacks defined in 'struct dev_pm_ops'::
+
+  struct dev_pm_ops {
+	...
+	int (*runtime_suspend)(struct device *dev);
+	int (*runtime_resume)(struct device *dev);
+	int (*runtime_idle)(struct device *dev);
+	...
+  };
+
+The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks
+are executed by the PM core for the device's subsystem that may be either of
+the following:
+
+  1. PM domain of the device, if the device's PM domain object, dev->pm_domain,
+     is present.
+
+  2. Device type of the device, if both dev->type and dev->type->pm are present.
+
+  3. Device class of the device, if both dev->class and dev->class->pm are
+     present.
+
+  4. Bus type of the device, if both dev->bus and dev->bus->pm are present.
+
+If the subsystem chosen by applying the above rules doesn't provide the relevant
+callback, the PM core will invoke the corresponding driver callback stored in
+dev->driver->pm directly (if present).
+
+The PM core always checks which callback to use in the order given above, so the
+priority order of callbacks from high to low is: PM domain, device type, class
+and bus type.  Moreover, the high-priority one will always take precedence over
+a low-priority one.  The PM domain, bus type, device type and class callbacks
+are referred to as subsystem-level callbacks in what follows.
+
+By default, the callbacks are always invoked in process context with interrupts
+enabled.  However, the pm_runtime_irq_safe() helper function can be used to tell
+the PM core that it is safe to run the ->runtime_suspend(), ->runtime_resume()
+and ->runtime_idle() callbacks for the given device in atomic context with
+interrupts disabled.  This implies that the callback routines in question must
+not block or sleep, but it also means that the synchronous helper functions
+listed at the end of Section 4 may be used for that device within an interrupt
+handler or generally in an atomic context.
+
+The subsystem-level suspend callback, if present, is _entirely_ _responsible_
+for handling the suspend of the device as appropriate, which may, but need not
+include executing the device driver's own ->runtime_suspend() callback (from the
+PM core's point of view it is not necessary to implement a ->runtime_suspend()
+callback in a device driver as long as the subsystem-level suspend callback
+knows what to do to handle the device).
+
+  * Once the subsystem-level suspend callback (or the driver suspend callback,
+    if invoked directly) has completed successfully for the given device, the PM
+    core regards the device as suspended, which need not mean that it has been
+    put into a low power state.  It is supposed to mean, however, that the
+    device will not process data and will not communicate with the CPU(s) and
+    RAM until the appropriate resume callback is executed for it.  The runtime
+    PM status of a device after successful execution of the suspend callback is
+    'suspended'.
+
+  * If the suspend callback returns -EBUSY or -EAGAIN, the device's runtime PM
+    status remains 'active', which means that the device _must_ be fully
+    operational afterwards.
+
+  * If the suspend callback returns an error code different from -EBUSY and
+    -EAGAIN, the PM core regards this as a fatal error and will refuse to run
+    the helper functions described in Section 4 for the device until its status
+    is directly set to  either 'active', or 'suspended' (the PM core provides
+    special helper functions for this purpose).
+
+In particular, if the driver requires remote wakeup capability (i.e. hardware
+mechanism allowing the device to request a change of its power state, such as
+PCI PME) for proper functioning and device_can_wakeup() returns 'false' for the
+device, then ->runtime_suspend() should return -EBUSY.  On the other hand, if
+device_can_wakeup() returns 'true' for the device and the device is put into a
+low-power state during the execution of the suspend callback, it is expected
+that remote wakeup will be enabled for the device.  Generally, remote wakeup
+should be enabled for all input devices put into low-power states at run time.
+
+The subsystem-level resume callback, if present, is **entirely responsible** for
+handling the resume of the device as appropriate, which may, but need not
+include executing the device driver's own ->runtime_resume() callback (from the
+PM core's point of view it is not necessary to implement a ->runtime_resume()
+callback in a device driver as long as the subsystem-level resume callback knows
+what to do to handle the device).
+
+  * Once the subsystem-level resume callback (or the driver resume callback, if
+    invoked directly) has completed successfully, the PM core regards the device
+    as fully operational, which means that the device _must_ be able to complete
+    I/O operations as needed.  The runtime PM status of the device is then
+    'active'.
+
+  * If the resume callback returns an error code, the PM core regards this as a
+    fatal error and will refuse to run the helper functions described in Section
+    4 for the device, until its status is directly set to either 'active', or
+    'suspended' (by means of special helper functions provided by the PM core
+    for this purpose).
+
+The idle callback (a subsystem-level one, if present, or the driver one) is
+executed by the PM core whenever the device appears to be idle, which is
+indicated to the PM core by two counters, the device's usage counter and the
+counter of 'active' children of the device.
+
+  * If any of these counters is decreased using a helper function provided by
+    the PM core and it turns out to be equal to zero, the other counter is
+    checked.  If that counter also is equal to zero, the PM core executes the
+    idle callback with the device as its argument.
+
+The action performed by the idle callback is totally dependent on the subsystem
+(or driver) in question, but the expected and recommended action is to check
+if the device can be suspended (i.e. if all of the conditions necessary for
+suspending the device are satisfied) and to queue up a suspend request for the
+device in that case.  If there is no idle callback, or if the callback returns
+0, then the PM core will attempt to carry out a runtime suspend of the device,
+also respecting devices configured for autosuspend.  In essence this means a
+call to pm_runtime_autosuspend() (do note that drivers needs to update the
+device last busy mark, pm_runtime_mark_last_busy(), to control the delay under
+this circumstance).  To prevent this (for example, if the callback routine has
+started a delayed suspend), the routine must return a non-zero value.  Negative
+error return codes are ignored by the PM core.
+
+The helper functions provided by the PM core, described in Section 4, guarantee
+that the following constraints are met with respect to runtime PM callbacks for
+one device:
+
+(1) The callbacks are mutually exclusive (e.g. it is forbidden to execute
+    ->runtime_suspend() in parallel with ->runtime_resume() or with another
+    instance of ->runtime_suspend() for the same device) with the exception that
+    ->runtime_suspend() or ->runtime_resume() can be executed in parallel with
+    ->runtime_idle() (although ->runtime_idle() will not be started while any
+    of the other callbacks is being executed for the same device).
+
+(2) ->runtime_idle() and ->runtime_suspend() can only be executed for 'active'
+    devices (i.e. the PM core will only execute ->runtime_idle() or
+    ->runtime_suspend() for the devices the runtime PM status of which is
+    'active').
+
+(3) ->runtime_idle() and ->runtime_suspend() can only be executed for a device
+    the usage counter of which is equal to zero _and_ either the counter of
+    'active' children of which is equal to zero, or the 'power.ignore_children'
+    flag of which is set.
+
+(4) ->runtime_resume() can only be executed for 'suspended' devices  (i.e. the
+    PM core will only execute ->runtime_resume() for the devices the runtime
+    PM status of which is 'suspended').
+
+Additionally, the helper functions provided by the PM core obey the following
+rules:
+
+  * If ->runtime_suspend() is about to be executed or there's a pending request
+    to execute it, ->runtime_idle() will not be executed for the same device.
+
+  * A request to execute or to schedule the execution of ->runtime_suspend()
+    will cancel any pending requests to execute ->runtime_idle() for the same
+    device.
+
+  * If ->runtime_resume() is about to be executed or there's a pending request
+    to execute it, the other callbacks will not be executed for the same device.
+
+  * A request to execute ->runtime_resume() will cancel any pending or
+    scheduled requests to execute the other callbacks for the same device,
+    except for scheduled autosuspends.
+
+3. Runtime PM Device Fields
+===========================
+
+The following device runtime PM fields are present in 'struct dev_pm_info', as
+defined in include/linux/pm.h:
+
+  `struct timer_list suspend_timer;`
+    - timer used for scheduling (delayed) suspend and autosuspend requests
+
+  `unsigned long timer_expires;`
+    - timer expiration time, in jiffies (if this is different from zero, the
+      timer is running and will expire at that time, otherwise the timer is not
+      running)
+
+  `struct work_struct work;`
+    - work structure used for queuing up requests (i.e. work items in pm_wq)
+
+  `wait_queue_head_t wait_queue;`
+    - wait queue used if any of the helper functions needs to wait for another
+      one to complete
+
+  `spinlock_t lock;`
+    - lock used for synchronization
+
+  `atomic_t usage_count;`
+    - the usage counter of the device
+
+  `atomic_t child_count;`
+    - the count of 'active' children of the device
+
+  `unsigned int ignore_children;`
+    - if set, the value of child_count is ignored (but still updated)
+
+  `unsigned int disable_depth;`
+    - used for disabling the helper functions (they work normally if this is
+      equal to zero); the initial value of it is 1 (i.e. runtime PM is
+      initially disabled for all devices)
+
+  `int runtime_error;`
+    - if set, there was a fatal error (one of the callbacks returned error code
+      as described in Section 2), so the helper functions will not work until
+      this flag is cleared; this is the error code returned by the failing
+      callback
+
+  `unsigned int idle_notification;`
+    - if set, ->runtime_idle() is being executed
+
+  `unsigned int request_pending;`
+    - if set, there's a pending request (i.e. a work item queued up into pm_wq)
+
+  `enum rpm_request request;`
+    - type of request that's pending (valid if request_pending is set)
+
+  `unsigned int deferred_resume;`
+    - set if ->runtime_resume() is about to be run while ->runtime_suspend() is
+      being executed for that device and it is not practical to wait for the
+      suspend to complete; means "start a resume as soon as you've suspended"
+
+  `enum rpm_status runtime_status;`
+    - the runtime PM status of the device; this field's initial value is
+      RPM_SUSPENDED, which means that each device is initially regarded by the
+      PM core as 'suspended', regardless of its real hardware status
+
+  `enum rpm_status last_status;`
+    - the last runtime PM status of the device captured before disabling runtime
+      PM for it (invalid initially and when disable_depth is 0)
+
+  `unsigned int runtime_auto;`
+    - if set, indicates that the user space has allowed the device driver to
+      power manage the device at run time via the /sys/devices/.../power/control
+      `interface;` it may only be modified with the help of the
+      pm_runtime_allow() and pm_runtime_forbid() helper functions
+
+  `unsigned int no_callbacks;`
+    - indicates that the device does not use the runtime PM callbacks (see
+      Section 8); it may be modified only by the pm_runtime_no_callbacks()
+      helper function
+
+  `unsigned int irq_safe;`
+    - indicates that the ->runtime_suspend() and ->runtime_resume() callbacks
+      will be invoked with the spinlock held and interrupts disabled
+
+  `unsigned int use_autosuspend;`
+    - indicates that the device's driver supports delayed autosuspend (see
+      Section 9); it may be modified only by the
+      pm_runtime{_dont}_use_autosuspend() helper functions
+
+  `unsigned int timer_autosuspends;`
+    - indicates that the PM core should attempt to carry out an autosuspend
+      when the timer expires rather than a normal suspend
+
+  `int autosuspend_delay;`
+    - the delay time (in milliseconds) to be used for autosuspend
+
+  `unsigned long last_busy;`
+    - the time (in jiffies) when the pm_runtime_mark_last_busy() helper
+      function was last called for this device; used in calculating inactivity
+      periods for autosuspend
+
+All of the above fields are members of the 'power' member of 'struct device'.
+
+4. Runtime PM Device Helper Functions
+=====================================
+
+The following runtime PM helper functions are defined in
+drivers/base/power/runtime.c and include/linux/pm_runtime.h:
+
+  `void pm_runtime_init(struct device *dev);`
+    - initialize the device runtime PM fields in 'struct dev_pm_info'
+
+  `void pm_runtime_remove(struct device *dev);`
+    - make sure that the runtime PM of the device will be disabled after
+      removing the device from device hierarchy
+
+  `int pm_runtime_idle(struct device *dev);`
+    - execute the subsystem-level idle callback for the device; returns an
+      error code on failure, where -EINPROGRESS means that ->runtime_idle() is
+      already being executed; if there is no callback or the callback returns 0
+      then run pm_runtime_autosuspend(dev) and return its result
+
+  `int pm_runtime_suspend(struct device *dev);`
+    - execute the subsystem-level suspend callback for the device; returns 0 on
+      success, 1 if the device's runtime PM status was already 'suspended', or
+      error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt
+      to suspend the device again in future and -EACCES means that
+      'power.disable_depth' is different from 0
+
+  `int pm_runtime_autosuspend(struct device *dev);`
+    - same as pm_runtime_suspend() except that the autosuspend delay is taken
+      `into account;` if pm_runtime_autosuspend_expiration() says the delay has
+      not yet expired then an autosuspend is scheduled for the appropriate time
+      and 0 is returned
+
+  `int pm_runtime_resume(struct device *dev);`
+    - execute the subsystem-level resume callback for the device; returns 0 on
+      success, 1 if the device's runtime PM status is already 'active' (also if
+      'power.disable_depth' is nonzero, but the status was 'active' when it was
+      changing from 0 to 1) or error code on failure, where -EAGAIN means it may
+      be safe to attempt to resume the device again in future, but
+      'power.runtime_error' should be checked additionally, and -EACCES means
+      that the callback could not be run, because 'power.disable_depth' was
+      different from 0
+
+  `int pm_runtime_resume_and_get(struct device *dev);`
+    - run pm_runtime_resume(dev) and if successful, increment the device's
+      usage counter; return the result of pm_runtime_resume
+
+  `int pm_request_idle(struct device *dev);`
+    - submit a request to execute the subsystem-level idle callback for the
+      device (the request is represented by a work item in pm_wq); returns 0 on
+      success or error code if the request has not been queued up
+
+  `int pm_request_autosuspend(struct device *dev);`
+    - schedule the execution of the subsystem-level suspend callback for the
+      device when the autosuspend delay has expired; if the delay has already
+      expired then the work item is queued up immediately
+
+  `int pm_schedule_suspend(struct device *dev, unsigned int delay);`
+    - schedule the execution of the subsystem-level suspend callback for the
+      device in future, where 'delay' is the time to wait before queuing up a
+      suspend work item in pm_wq, in milliseconds (if 'delay' is zero, the work
+      item is queued up immediately); returns 0 on success, 1 if the device's PM
+      runtime status was already 'suspended', or error code if the request
+      hasn't been scheduled (or queued up if 'delay' is 0); if the execution of
+      ->runtime_suspend() is already scheduled and not yet expired, the new
+      value of 'delay' will be used as the time to wait
+
+  `int pm_request_resume(struct device *dev);`
+    - submit a request to execute the subsystem-level resume callback for the
+      device (the request is represented by a work item in pm_wq); returns 0 on
+      success, 1 if the device's runtime PM status was already 'active', or
+      error code if the request hasn't been queued up
+
+  `void pm_runtime_get_noresume(struct device *dev);`
+    - increment the device's usage counter
+
+  `int pm_runtime_get(struct device *dev);`
+    - increment the device's usage counter, run pm_request_resume(dev) and
+      return its result
+
+  `int pm_runtime_get_sync(struct device *dev);`
+    - increment the device's usage counter, run pm_runtime_resume(dev) and
+      return its result;
+      note that it does not drop the device's usage counter on errors, so
+      consider using pm_runtime_resume_and_get() instead of it, especially
+      if its return value is checked by the caller, as this is likely to
+      result in cleaner code.
+
+  `int pm_runtime_get_if_in_use(struct device *dev);`
+    - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
+      runtime PM status is RPM_ACTIVE and the runtime PM usage counter is
+      nonzero, increment the counter and return 1; otherwise return 0 without
+      changing the counter
+
+  `int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count);`
+    - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
+      runtime PM status is RPM_ACTIVE, and either ign_usage_count is true
+      or the device's usage_count is non-zero, increment the counter and
+      return 1; otherwise return 0 without changing the counter
+
+  `void pm_runtime_put_noidle(struct device *dev);`
+    - decrement the device's usage counter
+
+  `int pm_runtime_put(struct device *dev);`
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_request_idle(dev) and return its result
+
+  `int pm_runtime_put_autosuspend(struct device *dev);`
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_request_autosuspend(dev) and return its result
+
+  `int pm_runtime_put_sync(struct device *dev);`
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_runtime_idle(dev) and return its result
+
+  `int pm_runtime_put_sync_suspend(struct device *dev);`
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_runtime_suspend(dev) and return its result
+
+  `int pm_runtime_put_sync_autosuspend(struct device *dev);`
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_runtime_autosuspend(dev) and return its result
+
+  `void pm_runtime_enable(struct device *dev);`
+    - decrement the device's 'power.disable_depth' field; if that field is equal
+      to zero, the runtime PM helper functions can execute subsystem-level
+      callbacks described in Section 2 for the device
+
+  `int pm_runtime_disable(struct device *dev);`
+    - increment the device's 'power.disable_depth' field (if the value of that
+      field was previously zero, this prevents subsystem-level runtime PM
+      callbacks from being run for the device), make sure that all of the
+      pending runtime PM operations on the device are either completed or
+      canceled; returns 1 if there was a resume request pending and it was
+      necessary to execute the subsystem-level resume callback for the device
+      to satisfy that request, otherwise 0 is returned
+
+  `int pm_runtime_barrier(struct device *dev);`
+    - check if there's a resume request pending for the device and resume it
+      (synchronously) in that case, cancel any other pending runtime PM requests
+      regarding it and wait for all runtime PM operations on it in progress to
+      complete; returns 1 if there was a resume request pending and it was
+      necessary to execute the subsystem-level resume callback for the device to
+      satisfy that request, otherwise 0 is returned
+
+  `void pm_suspend_ignore_children(struct device *dev, bool enable);`
+    - set/unset the power.ignore_children flag of the device
+
+  `int pm_runtime_set_active(struct device *dev);`
+    - clear the device's 'power.runtime_error' flag, set the device's runtime
+      PM status to 'active' and update its parent's counter of 'active'
+      children as appropriate (it is only valid to use this function if
+      'power.runtime_error' is set or 'power.disable_depth' is greater than
+      zero); it will fail and return error code if the device has a parent
+      which is not active and the 'power.ignore_children' flag of which is unset
+
+  `void pm_runtime_set_suspended(struct device *dev);`
+    - clear the device's 'power.runtime_error' flag, set the device's runtime
+      PM status to 'suspended' and update its parent's counter of 'active'
+      children as appropriate (it is only valid to use this function if
+      'power.runtime_error' is set or 'power.disable_depth' is greater than
+      zero)
+
+  `bool pm_runtime_active(struct device *dev);`
+    - return true if the device's runtime PM status is 'active' or its
+      'power.disable_depth' field is not equal to zero, or false otherwise
+
+  `bool pm_runtime_suspended(struct device *dev);`
+    - return true if the device's runtime PM status is 'suspended' and its
+      'power.disable_depth' field is equal to zero, or false otherwise
+
+  `bool pm_runtime_status_suspended(struct device *dev);`
+    - return true if the device's runtime PM status is 'suspended'
+
+  `void pm_runtime_allow(struct device *dev);`
+    - set the power.runtime_auto flag for the device and decrease its usage
+      counter (used by the /sys/devices/.../power/control interface to
+      effectively allow the device to be power managed at run time)
+
+  `void pm_runtime_forbid(struct device *dev);`
+    - unset the power.runtime_auto flag for the device and increase its usage
+      counter (used by the /sys/devices/.../power/control interface to
+      effectively prevent the device from being power managed at run time)
+
+  `void pm_runtime_no_callbacks(struct device *dev);`
+    - set the power.no_callbacks flag for the device and remove the runtime
+      PM attributes from /sys/devices/.../power (or prevent them from being
+      added when the device is registered)
+
+  `void pm_runtime_irq_safe(struct device *dev);`
+    - set the power.irq_safe flag for the device, causing the runtime-PM
+      callbacks to be invoked with interrupts off
+
+  `bool pm_runtime_is_irq_safe(struct device *dev);`
+    - return true if power.irq_safe flag was set for the device, causing
+      the runtime-PM callbacks to be invoked with interrupts off
+
+  `void pm_runtime_mark_last_busy(struct device *dev);`
+    - set the power.last_busy field to the current time
+
+  `void pm_runtime_use_autosuspend(struct device *dev);`
+    - set the power.use_autosuspend flag, enabling autosuspend delays; call
+      pm_runtime_get_sync if the flag was previously cleared and
+      power.autosuspend_delay is negative
+
+  `void pm_runtime_dont_use_autosuspend(struct device *dev);`
+    - clear the power.use_autosuspend flag, disabling autosuspend delays;
+      decrement the device's usage counter if the flag was previously set and
+      power.autosuspend_delay is negative; call pm_runtime_idle
+
+  `void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);`
+    - set the power.autosuspend_delay value to 'delay' (expressed in
+      milliseconds); if 'delay' is negative then runtime suspends are
+      prevented; if power.use_autosuspend is set, pm_runtime_get_sync may be
+      called or the device's usage counter may be decremented and
+      pm_runtime_idle called depending on if power.autosuspend_delay is
+      changed to or from a negative value; if power.use_autosuspend is clear,
+      pm_runtime_idle is called
+
+  `unsigned long pm_runtime_autosuspend_expiration(struct device *dev);`
+    - calculate the time when the current autosuspend delay period will expire,
+      based on power.last_busy and power.autosuspend_delay; if the delay time
+      is 1000 ms or larger then the expiration time is rounded up to the
+      nearest second; returns 0 if the delay period has already expired or
+      power.use_autosuspend isn't set, otherwise returns the expiration time
+      in jiffies
+
+It is safe to execute the following helper functions from interrupt context:
+
+- pm_request_idle()
+- pm_request_autosuspend()
+- pm_schedule_suspend()
+- pm_request_resume()
+- pm_runtime_get_noresume()
+- pm_runtime_get()
+- pm_runtime_put_noidle()
+- pm_runtime_put()
+- pm_runtime_put_autosuspend()
+- pm_runtime_enable()
+- pm_suspend_ignore_children()
+- pm_runtime_set_active()
+- pm_runtime_set_suspended()
+- pm_runtime_suspended()
+- pm_runtime_mark_last_busy()
+- pm_runtime_autosuspend_expiration()
+
+If pm_runtime_irq_safe() has been called for a device then the following helper
+functions may also be used in interrupt context:
+
+- pm_runtime_idle()
+- pm_runtime_suspend()
+- pm_runtime_autosuspend()
+- pm_runtime_resume()
+- pm_runtime_get_sync()
+- pm_runtime_put_sync()
+- pm_runtime_put_sync_suspend()
+- pm_runtime_put_sync_autosuspend()
+
+5. Runtime PM Initialization, Device Probing and Removal
+========================================================
+
+Initially, the runtime PM is disabled for all devices, which means that the
+majority of the runtime PM helper functions described in Section 4 will return
+-EAGAIN until pm_runtime_enable() is called for the device.
+
+In addition to that, the initial runtime PM status of all devices is
+'suspended', but it need not reflect the actual physical state of the device.
+Thus, if the device is initially active (i.e. it is able to process I/O), its
+runtime PM status must be changed to 'active', with the help of
+pm_runtime_set_active(), before pm_runtime_enable() is called for the device.
+
+However, if the device has a parent and the parent's runtime PM is enabled,
+calling pm_runtime_set_active() for the device will affect the parent, unless
+the parent's 'power.ignore_children' flag is set.  Namely, in that case the
+parent won't be able to suspend at run time, using the PM core's helper
+functions, as long as the child's status is 'active', even if the child's
+runtime PM is still disabled (i.e. pm_runtime_enable() hasn't been called for
+the child yet or pm_runtime_disable() has been called for it).  For this reason,
+once pm_runtime_set_active() has been called for the device, pm_runtime_enable()
+should be called for it too as soon as reasonably possible or its runtime PM
+status should be changed back to 'suspended' with the help of
+pm_runtime_set_suspended().
+
+If the default initial runtime PM status of the device (i.e. 'suspended')
+reflects the actual state of the device, its bus type's or its driver's
+->probe() callback will likely need to wake it up using one of the PM core's
+helper functions described in Section 4.  In that case, pm_runtime_resume()
+should be used.  Of course, for this purpose the device's runtime PM has to be
+enabled earlier by calling pm_runtime_enable().
+
+Note, if the device may execute pm_runtime calls during the probe (such as
+if it is registered with a subsystem that may call back in) then the
+pm_runtime_get_sync() call paired with a pm_runtime_put() call will be
+appropriate to ensure that the device is not put back to sleep during the
+probe. This can happen with systems such as the network device layer.
+
+It may be desirable to suspend the device once ->probe() has finished.
+Therefore the driver core uses the asynchronous pm_request_idle() to submit a
+request to execute the subsystem-level idle callback for the device at that
+time.  A driver that makes use of the runtime autosuspend feature may want to
+update the last busy mark before returning from ->probe().
+
+Moreover, the driver core prevents runtime PM callbacks from racing with the bus
+notifier callback in __device_release_driver(), which is necessary because the
+notifier is used by some subsystems to carry out operations affecting the
+runtime PM functionality.  It does so by calling pm_runtime_get_sync() before
+driver_sysfs_remove() and the BUS_NOTIFY_UNBIND_DRIVER notifications.  This
+resumes the device if it's in the suspended state and prevents it from
+being suspended again while those routines are being executed.
+
+To allow bus types and drivers to put devices into the suspended state by
+calling pm_runtime_suspend() from their ->remove() routines, the driver core
+executes pm_runtime_put_sync() after running the BUS_NOTIFY_UNBIND_DRIVER
+notifications in __device_release_driver().  This requires bus types and
+drivers to make their ->remove() callbacks avoid races with runtime PM directly,
+but it also allows more flexibility in the handling of devices during the
+removal of their drivers.
+
+Drivers in ->remove() callback should undo the runtime PM changes done
+in ->probe(). Usually this means calling pm_runtime_disable(),
+pm_runtime_dont_use_autosuspend() etc.
+
+The user space can effectively disallow the driver of the device to power manage
+it at run time by changing the value of its /sys/devices/.../power/control
+attribute to "on", which causes pm_runtime_forbid() to be called.  In principle,
+this mechanism may also be used by the driver to effectively turn off the
+runtime power management of the device until the user space turns it on.
+Namely, during the initialization the driver can make sure that the runtime PM
+status of the device is 'active' and call pm_runtime_forbid().  It should be
+noted, however, that if the user space has already intentionally changed the
+value of /sys/devices/.../power/control to "auto" to allow the driver to power
+manage the device at run time, the driver may confuse it by using
+pm_runtime_forbid() this way.
+
+6. Runtime PM and System Sleep
+==============================
+
+Runtime PM and system sleep (i.e., system suspend and hibernation, also known
+as suspend-to-RAM and suspend-to-disk) interact with each other in a couple of
+ways.  If a device is active when a system sleep starts, everything is
+straightforward.  But what should happen if the device is already suspended?
+
+The device may have different wake-up settings for runtime PM and system sleep.
+For example, remote wake-up may be enabled for runtime suspend but disallowed
+for system sleep (device_may_wakeup(dev) returns 'false').  When this happens,
+the subsystem-level system suspend callback is responsible for changing the
+device's wake-up setting (it may leave that to the device driver's system
+suspend routine).  It may be necessary to resume the device and suspend it again
+in order to do so.  The same is true if the driver uses different power levels
+or other settings for runtime suspend and system sleep.
+
+During system resume, the simplest approach is to bring all devices back to full
+power, even if they had been suspended before the system suspend began.  There
+are several reasons for this, including:
+
+  * The device might need to switch power levels, wake-up settings, etc.
+
+  * Remote wake-up events might have been lost by the firmware.
+
+  * The device's children may need the device to be at full power in order
+    to resume themselves.
+
+  * The driver's idea of the device state may not agree with the device's
+    physical state.  This can happen during resume from hibernation.
+
+  * The device might need to be reset.
+
+  * Even though the device was suspended, if its usage counter was > 0 then most
+    likely it would need a runtime resume in the near future anyway.
+
+If the device had been suspended before the system suspend began and it's
+brought back to full power during resume, then its runtime PM status will have
+to be updated to reflect the actual post-system sleep status.  The way to do
+this is:
+
+	 - pm_runtime_disable(dev);
+	 - pm_runtime_set_active(dev);
+	 - pm_runtime_enable(dev);
+
+The PM core always increments the runtime usage counter before calling the
+->suspend() callback and decrements it after calling the ->resume() callback.
+Hence disabling runtime PM temporarily like this will not cause any runtime
+suspend attempts to be permanently lost.  If the usage count goes to zero
+following the return of the ->resume() callback, the ->runtime_idle() callback
+will be invoked as usual.
+
+On some systems, however, system sleep is not entered through a global firmware
+or hardware operation.  Instead, all hardware components are put into low-power
+states directly by the kernel in a coordinated way.  Then, the system sleep
+state effectively follows from the states the hardware components end up in
+and the system is woken up from that state by a hardware interrupt or a similar
+mechanism entirely under the kernel's control.  As a result, the kernel never
+gives control away and the states of all devices during resume are precisely
+known to it.  If that is the case and none of the situations listed above takes
+place (in particular, if the system is not waking up from hibernation), it may
+be more efficient to leave the devices that had been suspended before the system
+suspend began in the suspended state.
+
+To this end, the PM core provides a mechanism allowing some coordination between
+different levels of device hierarchy.  Namely, if a system suspend .prepare()
+callback returns a positive number for a device, that indicates to the PM core
+that the device appears to be runtime-suspended and its state is fine, so it
+may be left in runtime suspend provided that all of its descendants are also
+left in runtime suspend.  If that happens, the PM core will not execute any
+system suspend and resume callbacks for all of those devices, except for the
+.complete() callback, which is then entirely responsible for handling the device
+as appropriate.  This only applies to system suspend transitions that are not
+related to hibernation (see Documentation/driver-api/pm/devices.rst for more
+information).
+
+The PM core does its best to reduce the probability of race conditions between
+the runtime PM and system suspend/resume (and hibernation) callbacks by carrying
+out the following operations:
+
+  * During system suspend pm_runtime_get_noresume() is called for every device
+    right before executing the subsystem-level .prepare() callback for it and
+    pm_runtime_barrier() is called for every device right before executing the
+    subsystem-level .suspend() callback for it.  In addition to that the PM core
+    calls __pm_runtime_disable() with 'false' as the second argument for every
+    device right before executing the subsystem-level .suspend_late() callback
+    for it.
+
+  * During system resume pm_runtime_enable() and pm_runtime_put() are called for
+    every device right after executing the subsystem-level .resume_early()
+    callback and right after executing the subsystem-level .complete() callback
+    for it, respectively.
+
+7. Generic subsystem callbacks
+
+Subsystems may wish to conserve code space by using the set of generic power
+management callbacks provided by the PM core, defined in
+driver/base/power/generic_ops.c:
+
+  `int pm_generic_runtime_suspend(struct device *dev);`
+    - invoke the ->runtime_suspend() callback provided by the driver of this
+      device and return its result, or return 0 if not defined
+
+  `int pm_generic_runtime_resume(struct device *dev);`
+    - invoke the ->runtime_resume() callback provided by the driver of this
+      device and return its result, or return 0 if not defined
+
+  `int pm_generic_suspend(struct device *dev);`
+    - if the device has not been suspended at run time, invoke the ->suspend()
+      callback provided by its driver and return its result, or return 0 if not
+      defined
+
+  `int pm_generic_suspend_noirq(struct device *dev);`
+    - if pm_runtime_suspended(dev) returns "false", invoke the ->suspend_noirq()
+      callback provided by the device's driver and return its result, or return
+      0 if not defined
+
+  `int pm_generic_resume(struct device *dev);`
+    - invoke the ->resume() callback provided by the driver of this device and,
+      if successful, change the device's runtime PM status to 'active'
+
+  `int pm_generic_resume_noirq(struct device *dev);`
+    - invoke the ->resume_noirq() callback provided by the driver of this device
+
+  `int pm_generic_freeze(struct device *dev);`
+    - if the device has not been suspended at run time, invoke the ->freeze()
+      callback provided by its driver and return its result, or return 0 if not
+      defined
+
+  `int pm_generic_freeze_noirq(struct device *dev);`
+    - if pm_runtime_suspended(dev) returns "false", invoke the ->freeze_noirq()
+      callback provided by the device's driver and return its result, or return
+      0 if not defined
+
+  `int pm_generic_thaw(struct device *dev);`
+    - if the device has not been suspended at run time, invoke the ->thaw()
+      callback provided by its driver and return its result, or return 0 if not
+      defined
+
+  `int pm_generic_thaw_noirq(struct device *dev);`
+    - if pm_runtime_suspended(dev) returns "false", invoke the ->thaw_noirq()
+      callback provided by the device's driver and return its result, or return
+      0 if not defined
+
+  `int pm_generic_poweroff(struct device *dev);`
+    - if the device has not been suspended at run time, invoke the ->poweroff()
+      callback provided by its driver and return its result, or return 0 if not
+      defined
+
+  `int pm_generic_poweroff_noirq(struct device *dev);`
+    - if pm_runtime_suspended(dev) returns "false", run the ->poweroff_noirq()
+      callback provided by the device's driver and return its result, or return
+      0 if not defined
+
+  `int pm_generic_restore(struct device *dev);`
+    - invoke the ->restore() callback provided by the driver of this device and,
+      if successful, change the device's runtime PM status to 'active'
+
+  `int pm_generic_restore_noirq(struct device *dev);`
+    - invoke the ->restore_noirq() callback provided by the device's driver
+
+These functions are the defaults used by the PM core if a subsystem doesn't
+provide its own callbacks for ->runtime_idle(), ->runtime_suspend(),
+->runtime_resume(), ->suspend(), ->suspend_noirq(), ->resume(),
+->resume_noirq(), ->freeze(), ->freeze_noirq(), ->thaw(), ->thaw_noirq(),
+->poweroff(), ->poweroff_noirq(), ->restore(), ->restore_noirq() in the
+subsystem-level dev_pm_ops structure.
+
+Device drivers that wish to use the same function as a system suspend, freeze,
+poweroff and runtime suspend callback, and similarly for system resume, thaw,
+restore, and runtime resume, can achieve this with the help of the
+UNIVERSAL_DEV_PM_OPS macro defined in include/linux/pm.h (possibly setting its
+last argument to NULL).
+
+8. "No-Callback" Devices
+========================
+
+Some "devices" are only logical sub-devices of their parent and cannot be
+power-managed on their own.  (The prototype example is a USB interface.  Entire
+USB devices can go into low-power mode or send wake-up requests, but neither is
+possible for individual interfaces.)  The drivers for these devices have no
+need of runtime PM callbacks; if the callbacks did exist, ->runtime_suspend()
+and ->runtime_resume() would always return 0 without doing anything else and
+->runtime_idle() would always call pm_runtime_suspend().
+
+Subsystems can tell the PM core about these devices by calling
+pm_runtime_no_callbacks().  This should be done after the device structure is
+initialized and before it is registered (although after device registration is
+also okay).  The routine will set the device's power.no_callbacks flag and
+prevent the non-debugging runtime PM sysfs attributes from being created.
+
+When power.no_callbacks is set, the PM core will not invoke the
+->runtime_idle(), ->runtime_suspend(), or ->runtime_resume() callbacks.
+Instead it will assume that suspends and resumes always succeed and that idle
+devices should be suspended.
+
+As a consequence, the PM core will never directly inform the device's subsystem
+or driver about runtime power changes.  Instead, the driver for the device's
+parent must take responsibility for telling the device's driver when the
+parent's power state changes.
+
+Note that, in some cases it may not be desirable for subsystems/drivers to call
+pm_runtime_no_callbacks() for their devices. This could be because a subset of
+the runtime PM callbacks needs to be implemented, a platform dependent PM
+domain could get attached to the device or that the device is power managed
+through a supplier device link. For these reasons and to avoid boilerplate code
+in subsystems/drivers, the PM core allows runtime PM callbacks to be
+unassigned. More precisely, if a callback pointer is NULL, the PM core will act
+as though there was a callback and it returned 0.
+
+9. Autosuspend, or automatically-delayed suspends
+=================================================
+
+Changing a device's power state isn't free; it requires both time and energy.
+A device should be put in a low-power state only when there's some reason to
+think it will remain in that state for a substantial time.  A common heuristic
+says that a device which hasn't been used for a while is liable to remain
+unused; following this advice, drivers should not allow devices to be suspended
+at runtime until they have been inactive for some minimum period.  Even when
+the heuristic ends up being non-optimal, it will still prevent devices from
+"bouncing" too rapidly between low-power and full-power states.
+
+The term "autosuspend" is an historical remnant.  It doesn't mean that the
+device is automatically suspended (the subsystem or driver still has to call
+the appropriate PM routines); rather it means that runtime suspends will
+automatically be delayed until the desired period of inactivity has elapsed.
+
+Inactivity is determined based on the power.last_busy field.  Drivers should
+call pm_runtime_mark_last_busy() to update this field after carrying out I/O,
+typically just before calling pm_runtime_put_autosuspend().  The desired length
+of the inactivity period is a matter of policy.  Subsystems can set this length
+initially by calling pm_runtime_set_autosuspend_delay(), but after device
+registration the length should be controlled by user space, using the
+/sys/devices/.../power/autosuspend_delay_ms attribute.
+
+In order to use autosuspend, subsystems or drivers must call
+pm_runtime_use_autosuspend() (preferably before registering the device), and
+thereafter they should use the various `*_autosuspend()` helper functions
+instead of the non-autosuspend counterparts::
+
+	Instead of: pm_runtime_suspend    use: pm_runtime_autosuspend;
+	Instead of: pm_schedule_suspend   use: pm_request_autosuspend;
+	Instead of: pm_runtime_put        use: pm_runtime_put_autosuspend;
+	Instead of: pm_runtime_put_sync   use: pm_runtime_put_sync_autosuspend.
+
+Drivers may also continue to use the non-autosuspend helper functions; they
+will behave normally, which means sometimes taking the autosuspend delay into
+account (see pm_runtime_idle).
+
+Under some circumstances a driver or subsystem may want to prevent a device
+from autosuspending immediately, even though the usage counter is zero and the
+autosuspend delay time has expired.  If the ->runtime_suspend() callback
+returns -EAGAIN or -EBUSY, and if the next autosuspend delay expiration time is
+in the future (as it normally would be if the callback invoked
+pm_runtime_mark_last_busy()), the PM core will automatically reschedule the
+autosuspend.  The ->runtime_suspend() callback can't do this rescheduling
+itself because no suspend requests of any kind are accepted while the device is
+suspending (i.e., while the callback is running).
+
+The implementation is well suited for asynchronous use in interrupt contexts.
+However such use inevitably involves races, because the PM core can't
+synchronize ->runtime_suspend() callbacks with the arrival of I/O requests.
+This synchronization must be handled by the driver, using its private lock.
+Here is a schematic pseudo-code example::
+
+	foo_read_or_write(struct foo_priv *foo, void *data)
+	{
+		lock(&foo->private_lock);
+		add_request_to_io_queue(foo, data);
+		if (foo->num_pending_requests++ == 0)
+			pm_runtime_get(&foo->dev);
+		if (!foo->is_suspended)
+			foo_process_next_request(foo);
+		unlock(&foo->private_lock);
+	}
+
+	foo_io_completion(struct foo_priv *foo, void *req)
+	{
+		lock(&foo->private_lock);
+		if (--foo->num_pending_requests == 0) {
+			pm_runtime_mark_last_busy(&foo->dev);
+			pm_runtime_put_autosuspend(&foo->dev);
+		} else {
+			foo_process_next_request(foo);
+		}
+		unlock(&foo->private_lock);
+		/* Send req result back to the user ... */
+	}
+
+	int foo_runtime_suspend(struct device *dev)
+	{
+		struct foo_priv foo = container_of(dev, ...);
+		int ret = 0;
+
+		lock(&foo->private_lock);
+		if (foo->num_pending_requests > 0) {
+			ret = -EBUSY;
+		} else {
+			/* ... suspend the device ... */
+			foo->is_suspended = 1;
+		}
+		unlock(&foo->private_lock);
+		return ret;
+	}
+
+	int foo_runtime_resume(struct device *dev)
+	{
+		struct foo_priv foo = container_of(dev, ...);
+
+		lock(&foo->private_lock);
+		/* ... resume the device ... */
+		foo->is_suspended = 0;
+		pm_runtime_mark_last_busy(&foo->dev);
+		if (foo->num_pending_requests > 0)
+			foo_process_next_request(foo);
+		unlock(&foo->private_lock);
+		return 0;
+	}
+
+The important point is that after foo_io_completion() asks for an autosuspend,
+the foo_runtime_suspend() callback may race with foo_read_or_write().
+Therefore foo_runtime_suspend() has to check whether there are any pending I/O
+requests (while holding the private lock) before allowing the suspend to
+proceed.
+
+In addition, the power.autosuspend_delay field can be changed by user space at
+any time.  If a driver cares about this, it can call
+pm_runtime_autosuspend_expiration() from within the ->runtime_suspend()
+callback while holding its private lock.  If the function returns a nonzero
+value then the delay has not yet expired and the callback should return
+-EAGAIN.
diff --git a/Documentation/power/s2ram.rst b/Documentation/power/s2ram.rst
new file mode 100644
index 000000000..d739aa7c7
--- /dev/null
+++ b/Documentation/power/s2ram.rst
@@ -0,0 +1,87 @@
+========================
+How to get s2ram working
+========================
+
+2006 Linus Torvalds
+2006 Pavel Machek
+
+1) Check suspend.sf.net, program s2ram there has long whitelist of
+   "known ok" machines, along with tricks to use on each one.
+
+2) If that does not help, try reading tricks.txt and
+   video.txt. Perhaps problem is as simple as broken module, and
+   simple module unload can fix it.
+
+3) You can use Linus' TRACE_RESUME infrastructure, described below.
+
+Using TRACE_RESUME
+~~~~~~~~~~~~~~~~~~
+
+I've been working at making the machines I have able to STR, and almost
+always it's a driver that is buggy. Thank God for the suspend/resume
+debugging - the thing that Chuck tried to disable. That's often the _only_
+way to debug these things, and it's actually pretty powerful (but
+time-consuming - having to insert TRACE_RESUME() markers into the device
+driver that doesn't resume and recompile and reboot).
+
+Anyway, the way to debug this for people who are interested (have a
+machine that doesn't boot) is:
+
+ - enable PM_DEBUG, and PM_TRACE
+
+ - use a script like this::
+
+	#!/bin/sh
+	sync
+	echo 1 > /sys/power/pm_trace
+	echo mem > /sys/power/state
+
+   to suspend
+
+ - if it doesn't come back up (which is usually the problem), reboot by
+   holding the power button down, and look at the dmesg output for things
+   like::
+
+	Magic number: 4:156:725
+	hash matches drivers/base/power/resume.c:28
+	hash matches device 0000:01:00.0
+
+   which means that the last trace event was just before trying to resume
+   device 0000:01:00.0. Then figure out what driver is controlling that
+   device (lspci and /sys/devices/pci* is your friend), and see if you can
+   fix it, disable it, or trace into its resume function.
+
+   If no device matches the hash (or any matches appear to be false positives),
+   the culprit may be a device from a loadable kernel module that is not loaded
+   until after the hash is checked. You can check the hash against the current
+   devices again after more modules are loaded using sysfs::
+
+	cat /sys/power/pm_trace_dev_match
+
+For example, the above happens to be the VGA device on my EVO, which I
+used to run with "radeonfb" (it's an ATI Radeon mobility). It turns out
+that "radeonfb" simply cannot resume that device - it tries to set the
+PLL's, and it just _hangs_. Using the regular VGA console and letting X
+resume it instead works fine.
+
+NOTE
+====
+pm_trace uses the system's Real Time Clock (RTC) to save the magic number.
+Reason for this is that the RTC is the only reliably available piece of
+hardware during resume operations where a value can be set that will
+survive a reboot.
+
+pm_trace is not compatible with asynchronous suspend, so it turns
+asynchronous suspend off (which may work around timing or
+ordering-sensitive bugs).
+
+Consequence is that after a resume (even if it is successful) your system
+clock will have a value corresponding to the magic number instead of the
+correct date/time! It is therefore advisable to use a program like ntp-date
+or rdate to reset the correct date/time from an external time source when
+using this trace option.
+
+As the clock keeps ticking it is also essential that the reboot is done
+quickly after the resume failure. The trace option does not use the seconds
+or the low order bits of the minutes of the RTC, but a too long delay will
+corrupt the magic value.
diff --git a/Documentation/power/suspend-and-cpuhotplug.rst b/Documentation/power/suspend-and-cpuhotplug.rst
new file mode 100644
index 000000000..ebedb6c75
--- /dev/null
+++ b/Documentation/power/suspend-and-cpuhotplug.rst
@@ -0,0 +1,287 @@
+====================================================================
+Interaction of Suspend code (S3) with the CPU hotplug infrastructure
+====================================================================
+
+(C) 2011 - 2014 Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
+
+
+I. Differences between CPU hotplug and Suspend-to-RAM
+======================================================
+
+How does the regular CPU hotplug code differ from how the Suspend-to-RAM
+infrastructure uses it internally? And where do they share common code?
+
+Well, a picture is worth a thousand words... So ASCII art follows :-)
+
+[This depicts the current design in the kernel, and focusses only on the
+interactions involving the freezer and CPU hotplug and also tries to explain
+the locking involved. It outlines the notifications involved as well.
+But please note that here, only the call paths are illustrated, with the aim
+of describing where they take different paths and where they share code.
+What happens when regular CPU hotplug and Suspend-to-RAM race with each other
+is not depicted here.]
+
+On a high level, the suspend-resume cycle goes like this::
+
+  |Freeze| -> |Disable nonboot| -> |Do suspend| -> |Enable nonboot| -> |Thaw |
+  |tasks |    |     cpus      |    |          |    |     cpus     |    |tasks|
+
+
+More details follow::
+
+                                Suspend call path
+                                -----------------
+
+                                  Write 'mem' to
+                                /sys/power/state
+                                    sysfs file
+                                        |
+                                        v
+                               Acquire system_transition_mutex lock
+                                        |
+                                        v
+                             Send PM_SUSPEND_PREPARE
+                                   notifications
+                                        |
+                                        v
+                                   Freeze tasks
+                                        |
+                                        |
+                                        v
+                              freeze_secondary_cpus()
+                                   /* start */
+                                        |
+                                        v
+                            Acquire cpu_add_remove_lock
+                                        |
+                                        v
+                             Iterate over CURRENTLY
+                                   online CPUs
+                                        |
+                                        |
+                                        |                ----------
+                                        v                          | L
+             ======>               _cpu_down()                     |
+            |              [This takes cpuhotplug.lock             |
+  Common    |               before taking down the CPU             |
+   code     |               and releases it when done]             | O
+            |            While it is at it, notifications          |
+            |            are sent when notable events occur,       |
+             ======>     by running all registered callbacks.      |
+                                        |                          | O
+                                        |                          |
+                                        |                          |
+                                        v                          |
+                            Note down these cpus in                | P
+                                frozen_cpus mask         ----------
+                                        |
+                                        v
+                           Disable regular cpu hotplug
+                        by increasing cpu_hotplug_disabled
+                                        |
+                                        v
+                            Release cpu_add_remove_lock
+                                        |
+                                        v
+                       /* freeze_secondary_cpus() complete */
+                                        |
+                                        v
+                                   Do suspend
+
+
+
+Resuming back is likewise, with the counterparts being (in the order of
+execution during resume):
+
+* thaw_secondary_cpus() which involves::
+
+   |  Acquire cpu_add_remove_lock
+   |  Decrease cpu_hotplug_disabled, thereby enabling regular cpu hotplug
+   |  Call _cpu_up() [for all those cpus in the frozen_cpus mask, in a loop]
+   |  Release cpu_add_remove_lock
+   v
+
+* thaw tasks
+* send PM_POST_SUSPEND notifications
+* Release system_transition_mutex lock.
+
+
+It is to be noted here that the system_transition_mutex lock is acquired at the
+very beginning, when we are just starting out to suspend, and then released only
+after the entire cycle is complete (i.e., suspend + resume).
+
+::
+
+
+
+                          Regular CPU hotplug call path
+                          -----------------------------
+
+                                Write 0 (or 1) to
+                       /sys/devices/system/cpu/cpu*/online
+                                    sysfs file
+                                        |
+                                        |
+                                        v
+                                    cpu_down()
+                                        |
+                                        v
+                           Acquire cpu_add_remove_lock
+                                        |
+                                        v
+                          If cpu_hotplug_disabled > 0
+                                return gracefully
+                                        |
+                                        |
+                                        v
+             ======>                _cpu_down()
+            |              [This takes cpuhotplug.lock
+  Common    |               before taking down the CPU
+   code     |               and releases it when done]
+            |            While it is at it, notifications
+            |           are sent when notable events occur,
+             ======>    by running all registered callbacks.
+                                        |
+                                        |
+                                        v
+                          Release cpu_add_remove_lock
+                               [That's it!, for
+                              regular CPU hotplug]
+
+
+
+So, as can be seen from the two diagrams (the parts marked as "Common code"),
+regular CPU hotplug and the suspend code path converge at the _cpu_down() and
+_cpu_up() functions. They differ in the arguments passed to these functions,
+in that during regular CPU hotplug, 0 is passed for the 'tasks_frozen'
+argument. But during suspend, since the tasks are already frozen by the time
+the non-boot CPUs are offlined or onlined, the _cpu_*() functions are called
+with the 'tasks_frozen' argument set to 1.
+[See below for some known issues regarding this.]
+
+
+Important files and functions/entry points:
+-------------------------------------------
+
+- kernel/power/process.c : freeze_processes(), thaw_processes()
+- kernel/power/suspend.c : suspend_prepare(), suspend_enter(), suspend_finish()
+- kernel/cpu.c: cpu_[up|down](), _cpu_[up|down](),
+  [disable|enable]_nonboot_cpus()
+
+
+
+II. What are the issues involved in CPU hotplug?
+------------------------------------------------
+
+There are some interesting situations involving CPU hotplug and microcode
+update on the CPUs, as discussed below:
+
+[Please bear in mind that the kernel requests the microcode images from
+userspace, using the request_firmware() function defined in
+drivers/base/firmware_loader/main.c]
+
+
+a. When all the CPUs are identical:
+
+   This is the most common situation and it is quite straightforward: we want
+   to apply the same microcode revision to each of the CPUs.
+   To give an example of x86, the collect_cpu_info() function defined in
+   arch/x86/kernel/microcode_core.c helps in discovering the type of the CPU
+   and thereby in applying the correct microcode revision to it.
+   But note that the kernel does not maintain a common microcode image for the
+   all CPUs, in order to handle case 'b' described below.
+
+
+b. When some of the CPUs are different than the rest:
+
+   In this case since we probably need to apply different microcode revisions
+   to different CPUs, the kernel maintains a copy of the correct microcode
+   image for each CPU (after appropriate CPU type/model discovery using
+   functions such as collect_cpu_info()).
+
+
+c. When a CPU is physically hot-unplugged and a new (and possibly different
+   type of) CPU is hot-plugged into the system:
+
+   In the current design of the kernel, whenever a CPU is taken offline during
+   a regular CPU hotplug operation, upon receiving the CPU_DEAD notification
+   (which is sent by the CPU hotplug code), the microcode update driver's
+   callback for that event reacts by freeing the kernel's copy of the
+   microcode image for that CPU.
+
+   Hence, when a new CPU is brought online, since the kernel finds that it
+   doesn't have the microcode image, it does the CPU type/model discovery
+   afresh and then requests the userspace for the appropriate microcode image
+   for that CPU, which is subsequently applied.
+
+   For example, in x86, the mc_cpu_callback() function (which is the microcode
+   update driver's callback registered for CPU hotplug events) calls
+   microcode_update_cpu() which would call microcode_init_cpu() in this case,
+   instead of microcode_resume_cpu() when it finds that the kernel doesn't
+   have a valid microcode image. This ensures that the CPU type/model
+   discovery is performed and the right microcode is applied to the CPU after
+   getting it from userspace.
+
+
+d. Handling microcode update during suspend/hibernate:
+
+   Strictly speaking, during a CPU hotplug operation which does not involve
+   physically removing or inserting CPUs, the CPUs are not actually powered
+   off during a CPU offline. They are just put to the lowest C-states possible.
+   Hence, in such a case, it is not really necessary to re-apply microcode
+   when the CPUs are brought back online, since they wouldn't have lost the
+   image during the CPU offline operation.
+
+   This is the usual scenario encountered during a resume after a suspend.
+   However, in the case of hibernation, since all the CPUs are completely
+   powered off, during restore it becomes necessary to apply the microcode
+   images to all the CPUs.
+
+   [Note that we don't expect someone to physically pull out nodes and insert
+   nodes with a different type of CPUs in-between a suspend-resume or a
+   hibernate/restore cycle.]
+
+   In the current design of the kernel however, during a CPU offline operation
+   as part of the suspend/hibernate cycle (cpuhp_tasks_frozen is set),
+   the existing copy of microcode image in the kernel is not freed up.
+   And during the CPU online operations (during resume/restore), since the
+   kernel finds that it already has copies of the microcode images for all the
+   CPUs, it just applies them to the CPUs, avoiding any re-discovery of CPU
+   type/model and the need for validating whether the microcode revisions are
+   right for the CPUs or not (due to the above assumption that physical CPU
+   hotplug will not be done in-between suspend/resume or hibernate/restore
+   cycles).
+
+
+III. Known problems
+===================
+
+Are there any known problems when regular CPU hotplug and suspend race
+with each other?
+
+Yes, they are listed below:
+
+1. When invoking regular CPU hotplug, the 'tasks_frozen' argument passed to
+   the _cpu_down() and _cpu_up() functions is *always* 0.
+   This might not reflect the true current state of the system, since the
+   tasks could have been frozen by an out-of-band event such as a suspend
+   operation in progress. Hence, the cpuhp_tasks_frozen variable will not
+   reflect the frozen state and the CPU hotplug callbacks which evaluate
+   that variable might execute the wrong code path.
+
+2. If a regular CPU hotplug stress test happens to race with the freezer due
+   to a suspend operation in progress at the same time, then we could hit the
+   situation described below:
+
+    * A regular cpu online operation continues its journey from userspace
+      into the kernel, since the freezing has not yet begun.
+    * Then freezer gets to work and freezes userspace.
+    * If cpu online has not yet completed the microcode update stuff by now,
+      it will now start waiting on the frozen userspace in the
+      TASK_UNINTERRUPTIBLE state, in order to get the microcode image.
+    * Now the freezer continues and tries to freeze the remaining tasks. But
+      due to this wait mentioned above, the freezer won't be able to freeze
+      the cpu online hotplug task and hence freezing of tasks fails.
+
+   As a result of this task freezing failure, the suspend operation gets
+   aborted.
diff --git a/Documentation/power/suspend-and-interrupts.rst b/Documentation/power/suspend-and-interrupts.rst
new file mode 100644
index 000000000..4cda66177
--- /dev/null
+++ b/Documentation/power/suspend-and-interrupts.rst
@@ -0,0 +1,137 @@
+====================================
+System Suspend and Device Interrupts
+====================================
+
+Copyright (C) 2014 Intel Corp.
+Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+Suspending and Resuming Device IRQs
+-----------------------------------
+
+Device interrupt request lines (IRQs) are generally disabled during system
+suspend after the "late" phase of suspending devices (that is, after all of the
+->prepare, ->suspend and ->suspend_late callbacks have been executed for all
+devices).  That is done by suspend_device_irqs().
+
+The rationale for doing so is that after the "late" phase of device suspend
+there is no legitimate reason why any interrupts from suspended devices should
+trigger and if any devices have not been suspended properly yet, it is better to
+block interrupts from them anyway.  Also, in the past we had problems with
+interrupt handlers for shared IRQs that device drivers implementing them were
+not prepared for interrupts triggering after their devices had been suspended.
+In some cases they would attempt to access, for example, memory address spaces
+of suspended devices and cause unpredictable behavior to ensue as a result.
+Unfortunately, such problems are very difficult to debug and the introduction
+of suspend_device_irqs(), along with the "noirq" phase of device suspend and
+resume, was the only practical way to mitigate them.
+
+Device IRQs are re-enabled during system resume, right before the "early" phase
+of resuming devices (that is, before starting to execute ->resume_early
+callbacks for devices).  The function doing that is resume_device_irqs().
+
+
+The IRQF_NO_SUSPEND Flag
+------------------------
+
+There are interrupts that can legitimately trigger during the entire system
+suspend-resume cycle, including the "noirq" phases of suspending and resuming
+devices as well as during the time when nonboot CPUs are taken offline and
+brought back online.  That applies to timer interrupts in the first place,
+but also to IPIs and to some other special-purpose interrupts.
+
+The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when
+requesting a special-purpose interrupt.  It causes suspend_device_irqs() to
+leave the corresponding IRQ enabled so as to allow the interrupt to work as
+expected during the suspend-resume cycle, but does not guarantee that the
+interrupt will wake the system from a suspended state -- for such cases it is
+necessary to use enable_irq_wake().
+
+Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one
+user of it.  Thus, if the IRQ is shared, all of the interrupt handlers installed
+for it will be executed as usual after suspend_device_irqs(), even if the
+IRQF_NO_SUSPEND flag was not passed to request_irq() (or equivalent) by some of
+the IRQ's users.  For this reason, using IRQF_NO_SUSPEND and IRQF_SHARED at the
+same time should be avoided.
+
+
+System Wakeup Interrupts, enable_irq_wake() and disable_irq_wake()
+------------------------------------------------------------------
+
+System wakeup interrupts generally need to be configured to wake up the system
+from sleep states, especially if they are used for different purposes (e.g. as
+I/O interrupts) in the working state.
+
+That may involve turning on a special signal handling logic within the platform
+(such as an SoC) so that signals from a given line are routed in a different way
+during system sleep so as to trigger a system wakeup when needed.  For example,
+the platform may include a dedicated interrupt controller used specifically for
+handling system wakeup events.  Then, if a given interrupt line is supposed to
+wake up the system from sleep sates, the corresponding input of that interrupt
+controller needs to be enabled to receive signals from the line in question.
+After wakeup, it generally is better to disable that input to prevent the
+dedicated controller from triggering interrupts unnecessarily.
+
+The IRQ subsystem provides two helper functions to be used by device drivers for
+those purposes.  Namely, enable_irq_wake() turns on the platform's logic for
+handling the given IRQ as a system wakeup interrupt line and disable_irq_wake()
+turns that logic off.
+
+Calling enable_irq_wake() causes suspend_device_irqs() to treat the given IRQ
+in a special way.  Namely, the IRQ remains enabled, by on the first interrupt
+it will be disabled, marked as pending and "suspended" so that it will be
+re-enabled by resume_device_irqs() during the subsequent system resume.  Also
+the PM core is notified about the event which causes the system suspend in
+progress to be aborted (that doesn't have to happen immediately, but at one
+of the points where the suspend thread looks for pending wakeup events).
+
+This way every interrupt from a wakeup interrupt source will either cause the
+system suspend currently in progress to be aborted or wake up the system if
+already suspended.  However, after suspend_device_irqs() interrupt handlers are
+not executed for system wakeup IRQs.  They are only executed for IRQF_NO_SUSPEND
+IRQs at that time, but those IRQs should not be configured for system wakeup
+using enable_irq_wake().
+
+
+Interrupts and Suspend-to-Idle
+------------------------------
+
+Suspend-to-idle (also known as the "freeze" sleep state) is a relatively new
+system sleep state that works by idling all of the processors and waiting for
+interrupts right after the "noirq" phase of suspending devices.
+
+Of course, this means that all of the interrupts with the IRQF_NO_SUSPEND flag
+set will bring CPUs out of idle while in that state, but they will not cause the
+IRQ subsystem to trigger a system wakeup.
+
+System wakeup interrupts, in turn, will trigger wakeup from suspend-to-idle in
+analogy with what they do in the full system suspend case.  The only difference
+is that the wakeup from suspend-to-idle is signaled using the usual working
+state interrupt delivery mechanisms and doesn't require the platform to use
+any special interrupt handling logic for it to work.
+
+
+IRQF_NO_SUSPEND and enable_irq_wake()
+-------------------------------------
+
+There are very few valid reasons to use both enable_irq_wake() and the
+IRQF_NO_SUSPEND flag on the same IRQ, and it is never valid to use both for the
+same device.
+
+First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND
+interrupts (interrupt handlers are invoked after suspend_device_irqs()) are
+directly at odds with the rules for handling system wakeup interrupts (interrupt
+handlers are not invoked after suspend_device_irqs()).
+
+Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not
+to individual interrupt handlers, so sharing an IRQ between a system wakeup
+interrupt source and an IRQF_NO_SUSPEND interrupt source does not generally
+make sense.
+
+In rare cases an IRQ can be shared between a wakeup device driver and an
+IRQF_NO_SUSPEND user. In order for this to be safe, the wakeup device driver
+must be able to discern spurious IRQs from genuine wakeup events (signalling
+the latter to the core with pm_system_wakeup()), must use enable_irq_wake() to
+ensure that the IRQ will function as a wakeup source, and must request the IRQ
+with IRQF_COND_SUSPEND to tell the core that it meets these requirements. If
+these requirements are not met, it is not valid to use IRQF_COND_SUSPEND.
diff --git a/Documentation/power/swsusp-and-swap-files.rst b/Documentation/power/swsusp-and-swap-files.rst
new file mode 100644
index 000000000..a33a2919d
--- /dev/null
+++ b/Documentation/power/swsusp-and-swap-files.rst
@@ -0,0 +1,63 @@
+===============================================
+Using swap files with software suspend (swsusp)
+===============================================
+
+	(C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
+
+The Linux kernel handles swap files almost in the same way as it handles swap
+partitions and there are only two differences between these two types of swap
+areas:
+(1) swap files need not be contiguous,
+(2) the header of a swap file is not in the first block of the partition that
+holds it.  From the swsusp's point of view (1) is not a problem, because it is
+already taken care of by the swap-handling code, but (2) has to be taken into
+consideration.
+
+In principle the location of a swap file's header may be determined with the
+help of appropriate filesystem driver.  Unfortunately, however, it requires the
+filesystem holding the swap file to be mounted, and if this filesystem is
+journaled, it cannot be mounted during resume from disk.  For this reason to
+identify a swap file swsusp uses the name of the partition that holds the file
+and the offset from the beginning of the partition at which the swap file's
+header is located.  For convenience, this offset is expressed in <PAGE_SIZE>
+units.
+
+In order to use a swap file with swsusp, you need to:
+
+1) Create the swap file and make it active, eg.::
+
+    # dd if=/dev/zero of=<swap_file_path> bs=1024 count=<swap_file_size_in_k>
+    # mkswap <swap_file_path>
+    # swapon <swap_file_path>
+
+2) Use an application that will bmap the swap file with the help of the
+FIBMAP ioctl and determine the location of the file's swap header, as the
+offset, in <PAGE_SIZE> units, from the beginning of the partition which
+holds the swap file.
+
+3) Add the following parameters to the kernel command line::
+
+    resume=<swap_file_partition> resume_offset=<swap_file_offset>
+
+where <swap_file_partition> is the partition on which the swap file is located
+and <swap_file_offset> is the offset of the swap header determined by the
+application in 2) (of course, this step may be carried out automatically
+by the same application that determines the swap file's header offset using the
+FIBMAP ioctl)
+
+OR
+
+Use a userland suspend application that will set the partition and offset
+with the help of the SNAPSHOT_SET_SWAP_AREA ioctl described in
+Documentation/power/userland-swsusp.rst (this is the only method to suspend
+to a swap file allowing the resume to be initiated from an initrd or initramfs
+image).
+
+Now, swsusp will use the swap file in the same way in which it would use a swap
+partition.  In particular, the swap file has to be active (ie. be present in
+/proc/swaps) so that it can be used for suspending.
+
+Note that if the swap file used for suspending is deleted and recreated,
+the location of its header need not be the same as before.  Thus every time
+this happens the value of the "resume_offset=" kernel command line parameter
+has to be updated.
diff --git a/Documentation/power/swsusp-dmcrypt.rst b/Documentation/power/swsusp-dmcrypt.rst
new file mode 100644
index 000000000..426df5917
--- /dev/null
+++ b/Documentation/power/swsusp-dmcrypt.rst
@@ -0,0 +1,140 @@
+=======================================
+How to use dm-crypt and swsusp together
+=======================================
+
+Author: Andreas Steinmetz <ast@domdv.de>
+
+
+
+Some prerequisites:
+You know how dm-crypt works. If not, visit the following web page:
+http://www.saout.de/misc/dm-crypt/
+You have read Documentation/power/swsusp.rst and understand it.
+You did read Documentation/admin-guide/initrd.rst and know how an initrd works.
+You know how to create or how to modify an initrd.
+
+Now your system is properly set up, your disk is encrypted except for
+the swap device(s) and the boot partition which may contain a mini
+system for crypto setup and/or rescue purposes. You may even have
+an initrd that does your current crypto setup already.
+
+At this point you want to encrypt your swap, too. Still you want to
+be able to suspend using swsusp. This, however, means that you
+have to be able to either enter a passphrase or that you read
+the key(s) from an external device like a pcmcia flash disk
+or an usb stick prior to resume. So you need an initrd, that sets
+up dm-crypt and then asks swsusp to resume from the encrypted
+swap device.
+
+The most important thing is that you set up dm-crypt in such
+a way that the swap device you suspend to/resume from has
+always the same major/minor within the initrd as well as
+within your running system. The easiest way to achieve this is
+to always set up this swap device first with dmsetup, so that
+it will always look like the following::
+
+  brw-------  1 root root 254, 0 Jul 28 13:37 /dev/mapper/swap0
+
+Now set up your kernel to use /dev/mapper/swap0 as the default
+resume partition, so your kernel .config contains::
+
+  CONFIG_PM_STD_PARTITION="/dev/mapper/swap0"
+
+Prepare your boot loader to use the initrd you will create or
+modify. For lilo the simplest setup looks like the following
+lines::
+
+  image=/boot/vmlinuz
+  initrd=/boot/initrd.gz
+  label=linux
+  append="root=/dev/ram0 init=/linuxrc rw"
+
+Finally you need to create or modify your initrd. Lets assume
+you create an initrd that reads the required dm-crypt setup
+from a pcmcia flash disk card. The card is formatted with an ext2
+fs which resides on /dev/hde1 when the card is inserted. The
+card contains at least the encrypted swap setup in a file
+named "swapkey". /etc/fstab of your initrd contains something
+like the following::
+
+  /dev/hda1   /mnt    ext3      ro                            0 0
+  none        /proc   proc      defaults,noatime,nodiratime   0 0
+  none        /sys    sysfs     defaults,noatime,nodiratime   0 0
+
+/dev/hda1 contains an unencrypted mini system that sets up all
+of your crypto devices, again by reading the setup from the
+pcmcia flash disk. What follows now is a /linuxrc for your
+initrd that allows you to resume from encrypted swap and that
+continues boot with your mini system on /dev/hda1 if resume
+does not happen::
+
+  #!/bin/sh
+  PATH=/sbin:/bin:/usr/sbin:/usr/bin
+  mount /proc
+  mount /sys
+  mapped=0
+  noresume=`grep -c noresume /proc/cmdline`
+  if [ "$*" != "" ]
+  then
+    noresume=1
+  fi
+  dmesg -n 1
+  /sbin/cardmgr -q
+  for i in 1 2 3 4 5 6 7 8 9 0
+  do
+    if [ -f /proc/ide/hde/media ]
+    then
+      usleep 500000
+      mount -t ext2 -o ro /dev/hde1 /mnt
+      if [ -f /mnt/swapkey ]
+      then
+        dmsetup create swap0 /mnt/swapkey > /dev/null 2>&1 && mapped=1
+      fi
+      umount /mnt
+      break
+    fi
+    usleep 500000
+  done
+  killproc /sbin/cardmgr
+  dmesg -n 6
+  if [ $mapped = 1 ]
+  then
+    if [ $noresume != 0 ]
+    then
+      mkswap /dev/mapper/swap0 > /dev/null 2>&1
+    fi
+    echo 254:0 > /sys/power/resume
+    dmsetup remove swap0
+  fi
+  umount /sys
+  mount /mnt
+  umount /proc
+  cd /mnt
+  pivot_root . mnt
+  mount /proc
+  umount -l /mnt
+  umount /proc
+  exec chroot . /sbin/init $* < dev/console > dev/console 2>&1
+
+Please don't mind the weird loop above, busybox's msh doesn't know
+the let statement. Now, what is happening in the script?
+First we have to decide if we want to try to resume, or not.
+We will not resume if booting with "noresume" or any parameters
+for init like "single" or "emergency" as boot parameters.
+
+Then we need to set up dmcrypt with the setup data from the
+pcmcia flash disk. If this succeeds we need to reset the swap
+device if we don't want to resume. The line "echo 254:0 > /sys/power/resume"
+then attempts to resume from the first device mapper device.
+Note that it is important to set the device in /sys/power/resume,
+regardless if resuming or not, otherwise later suspend will fail.
+If resume starts, script execution terminates here.
+
+Otherwise we just remove the encrypted swap device and leave it to the
+mini system on /dev/hda1 to set the whole crypto up (it is up to
+you to modify this to your taste).
+
+What then follows is the well known process to change the root
+file system and continue booting from there. I prefer to unmount
+the initrd prior to continue booting but it is up to you to modify
+this.
diff --git a/Documentation/power/swsusp.rst b/Documentation/power/swsusp.rst
new file mode 100644
index 000000000..8524f079e
--- /dev/null
+++ b/Documentation/power/swsusp.rst
@@ -0,0 +1,503 @@
+============
+Swap suspend
+============
+
+Some warnings, first.
+
+.. warning::
+
+   **BIG FAT WARNING**
+
+   If you touch anything on disk between suspend and resume...
+				...kiss your data goodbye.
+
+   If you do resume from initrd after your filesystems are mounted...
+				...bye bye root partition.
+
+			[this is actually same case as above]
+
+   If you have unsupported ( ) devices using DMA, you may have some
+   problems. If your disk driver does not support suspend... (IDE does),
+   it may cause some problems, too. If you change kernel command line
+   between suspend and resume, it may do something wrong. If you change
+   your hardware while system is suspended... well, it was not good idea;
+   but it will probably only crash.
+
+   ( ) suspend/resume support is needed to make it safe.
+
+   If you have any filesystems on USB devices mounted before software suspend,
+   they won't be accessible after resume and you may lose data, as though
+   you have unplugged the USB devices with mounted filesystems on them;
+   see the FAQ below for details.  (This is not true for more traditional
+   power states like "standby", which normally don't turn USB off.)
+
+Swap partition:
+  You need to append resume=/dev/your_swap_partition to kernel command
+  line or specify it using /sys/power/resume.
+
+Swap file:
+  If using a swapfile you can also specify a resume offset using
+  resume_offset=<number> on the kernel command line or specify it
+  in /sys/power/resume_offset.
+
+After preparing then you suspend by::
+
+	echo shutdown > /sys/power/disk; echo disk > /sys/power/state
+
+- If you feel ACPI works pretty well on your system, you might try::
+
+	echo platform > /sys/power/disk; echo disk > /sys/power/state
+
+- If you would like to write hibernation image to swap and then suspend
+  to RAM (provided your platform supports it), you can try::
+
+	echo suspend > /sys/power/disk; echo disk > /sys/power/state
+
+- If you have SATA disks, you'll need recent kernels with SATA suspend
+  support. For suspend and resume to work, make sure your disk drivers
+  are built into kernel -- not modules. [There's way to make
+  suspend/resume with modular disk drivers, see FAQ, but you probably
+  should not do that.]
+
+If you want to limit the suspend image size to N bytes, do::
+
+	echo N > /sys/power/image_size
+
+before suspend (it is limited to around 2/5 of available RAM by default).
+
+- The resume process checks for the presence of the resume device,
+  if found, it then checks the contents for the hibernation image signature.
+  If both are found, it resumes the hibernation image.
+
+- The resume process may be triggered in two ways:
+
+  1) During lateinit:  If resume=/dev/your_swap_partition is specified on
+     the kernel command line, lateinit runs the resume process.  If the
+     resume device has not been probed yet, the resume process fails and
+     bootup continues.
+  2) Manually from an initrd or initramfs:  May be run from
+     the init script by using the /sys/power/resume file.  It is vital
+     that this be done prior to remounting any filesystems (even as
+     read-only) otherwise data may be corrupted.
+
+Article about goals and implementation of Software Suspend for Linux
+====================================================================
+
+Author: Gábor Kuti
+Last revised: 2003-10-20 by Pavel Machek
+
+Idea and goals to achieve
+-------------------------
+
+Nowadays it is common in several laptops that they have a suspend button. It
+saves the state of the machine to a filesystem or to a partition and switches
+to standby mode. Later resuming the machine the saved state is loaded back to
+ram and the machine can continue its work. It has two real benefits. First we
+save ourselves the time machine goes down and later boots up, energy costs
+are real high when running from batteries. The other gain is that we don't have
+to interrupt our programs so processes that are calculating something for a long
+time shouldn't need to be written interruptible.
+
+swsusp saves the state of the machine into active swaps and then reboots or
+powerdowns.  You must explicitly specify the swap partition to resume from with
+`resume=` kernel option. If signature is found it loads and restores saved
+state. If the option `noresume` is specified as a boot parameter, it skips
+the resuming.  If the option `hibernate=nocompress` is specified as a boot
+parameter, it saves hibernation image without compression.
+
+In the meantime while the system is suspended you should not add/remove any
+of the hardware, write to the filesystems, etc.
+
+Sleep states summary
+====================
+
+There are three different interfaces you can use, /proc/acpi should
+work like this:
+
+In a really perfect world::
+
+  echo 1 > /proc/acpi/sleep       # for standby
+  echo 2 > /proc/acpi/sleep       # for suspend to ram
+  echo 3 > /proc/acpi/sleep       # for suspend to ram, but with more power
+                                  # conservative
+  echo 4 > /proc/acpi/sleep       # for suspend to disk
+  echo 5 > /proc/acpi/sleep       # for shutdown unfriendly the system
+
+and perhaps::
+
+  echo 4b > /proc/acpi/sleep      # for suspend to disk via s4bios
+
+Frequently Asked Questions
+==========================
+
+Q:
+  well, suspending a server is IMHO a really stupid thing,
+  but... (Diego Zuccato):
+
+A:
+  You bought new UPS for your server. How do you install it without
+  bringing machine down? Suspend to disk, rearrange power cables,
+  resume.
+
+  You have your server on UPS. Power died, and UPS is indicating 30
+  seconds to failure. What do you do? Suspend to disk.
+
+
+Q:
+  Maybe I'm missing something, but why don't the regular I/O paths work?
+
+A:
+  We do use the regular I/O paths. However we cannot restore the data
+  to its original location as we load it. That would create an
+  inconsistent kernel state which would certainly result in an oops.
+  Instead, we load the image into unused memory and then atomically copy
+  it back to it original location. This implies, of course, a maximum
+  image size of half the amount of memory.
+
+  There are two solutions to this:
+
+  * require half of memory to be free during suspend. That way you can
+    read "new" data onto free spots, then cli and copy
+
+  * assume we had special "polling" ide driver that only uses memory
+    between 0-640KB. That way, I'd have to make sure that 0-640KB is free
+    during suspending, but otherwise it would work...
+
+  suspend2 shares this fundamental limitation, but does not include user
+  data and disk caches into "used memory" by saving them in
+  advance. That means that the limitation goes away in practice.
+
+Q:
+  Does linux support ACPI S4?
+
+A:
+  Yes. That's what echo platform > /sys/power/disk does.
+
+Q:
+  What is 'suspend2'?
+
+A:
+  suspend2 is 'Software Suspend 2', a forked implementation of
+  suspend-to-disk which is available as separate patches for 2.4 and 2.6
+  kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB
+  highmem and preemption. It also has a extensible architecture that
+  allows for arbitrary transformations on the image (compression,
+  encryption) and arbitrary backends for writing the image (eg to swap
+  or an NFS share[Work In Progress]). Questions regarding suspend2
+  should be sent to the mailing list available through the suspend2
+  website, and not to the Linux Kernel Mailing List. We are working
+  toward merging suspend2 into the mainline kernel.
+
+Q:
+  What is the freezing of tasks and why are we using it?
+
+A:
+  The freezing of tasks is a mechanism by which user space processes and some
+  kernel threads are controlled during hibernation or system-wide suspend (on
+  some architectures).  See freezing-of-tasks.txt for details.
+
+Q:
+  What is the difference between "platform" and "shutdown"?
+
+A:
+  shutdown:
+	save state in linux, then tell bios to powerdown
+
+  platform:
+	save state in linux, then tell bios to powerdown and blink
+        "suspended led"
+
+  "platform" is actually right thing to do where supported, but
+  "shutdown" is most reliable (except on ACPI systems).
+
+Q:
+  I do not understand why you have such strong objections to idea of
+  selective suspend.
+
+A:
+  Do selective suspend during runtime power management, that's okay. But
+  it's useless for suspend-to-disk. (And I do not see how you could use
+  it for suspend-to-ram, I hope you do not want that).
+
+  Lets see, so you suggest to
+
+  * SUSPEND all but swap device and parents
+  * Snapshot
+  * Write image to disk
+  * SUSPEND swap device and parents
+  * Powerdown
+
+  Oh no, that does not work, if swap device or its parents uses DMA,
+  you've corrupted data. You'd have to do
+
+  * SUSPEND all but swap device and parents
+  * FREEZE swap device and parents
+  * Snapshot
+  * UNFREEZE swap device and parents
+  * Write
+  * SUSPEND swap device and parents
+
+  Which means that you still need that FREEZE state, and you get more
+  complicated code. (And I have not yet introduce details like system
+  devices).
+
+Q:
+  There don't seem to be any generally useful behavioral
+  distinctions between SUSPEND and FREEZE.
+
+A:
+  Doing SUSPEND when you are asked to do FREEZE is always correct,
+  but it may be unnecessarily slow. If you want your driver to stay simple,
+  slowness may not matter to you. It can always be fixed later.
+
+  For devices like disk it does matter, you do not want to spindown for
+  FREEZE.
+
+Q:
+  After resuming, system is paging heavily, leading to very bad interactivity.
+
+A:
+  Try running::
+
+    cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u | while read file
+    do
+      test -f "$file" && cat "$file" > /dev/null
+    done
+
+  after resume. swapoff -a; swapon -a may also be useful.
+
+Q:
+  What happens to devices during swsusp? They seem to be resumed
+  during system suspend?
+
+A:
+  That's correct. We need to resume them if we want to write image to
+  disk. Whole sequence goes like
+
+      **Suspend part**
+
+      running system, user asks for suspend-to-disk
+
+      user processes are stopped
+
+      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
+      with state snapshot
+
+      state snapshot: copy of whole used memory is taken with interrupts
+      disabled
+
+      resume(): devices are woken up so that we can write image to swap
+
+      write image to swap
+
+      suspend(PMSG_SUSPEND): suspend devices so that we can power off
+
+      turn the power off
+
+      **Resume part**
+
+      (is actually pretty similar)
+
+      running system, user asks for suspend-to-disk
+
+      user processes are stopped (in common case there are none,
+      but with resume-from-initrd, no one knows)
+
+      read image from disk
+
+      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
+      with image restoration
+
+      image restoration: rewrite memory with image
+
+      resume(): devices are woken up so that system can continue
+
+      thaw all user processes
+
+Q:
+  What is this 'Encrypt suspend image' for?
+
+A:
+  First of all: it is not a replacement for dm-crypt encrypted swap.
+  It cannot protect your computer while it is suspended. Instead it does
+  protect from leaking sensitive data after resume from suspend.
+
+  Think of the following: you suspend while an application is running
+  that keeps sensitive data in memory. The application itself prevents
+  the data from being swapped out. Suspend, however, must write these
+  data to swap to be able to resume later on. Without suspend encryption
+  your sensitive data are then stored in plaintext on disk.  This means
+  that after resume your sensitive data are accessible to all
+  applications having direct access to the swap device which was used
+  for suspend. If you don't need swap after resume these data can remain
+  on disk virtually forever. Thus it can happen that your system gets
+  broken in weeks later and sensitive data which you thought were
+  encrypted and protected are retrieved and stolen from the swap device.
+  To prevent this situation you should use 'Encrypt suspend image'.
+
+  During suspend a temporary key is created and this key is used to
+  encrypt the data written to disk. When, during resume, the data was
+  read back into memory the temporary key is destroyed which simply
+  means that all data written to disk during suspend are then
+  inaccessible so they can't be stolen later on.  The only thing that
+  you must then take care of is that you call 'mkswap' for the swap
+  partition used for suspend as early as possible during regular
+  boot. This asserts that any temporary key from an oopsed suspend or
+  from a failed or aborted resume is erased from the swap device.
+
+  As a rule of thumb use encrypted swap to protect your data while your
+  system is shut down or suspended. Additionally use the encrypted
+  suspend image to prevent sensitive data from being stolen after
+  resume.
+
+Q:
+  Can I suspend to a swap file?
+
+A:
+  Generally, yes, you can.  However, it requires you to use the "resume=" and
+  "resume_offset=" kernel command line parameters, so the resume from a swap
+  file cannot be initiated from an initrd or initramfs image.  See
+  swsusp-and-swap-files.txt for details.
+
+Q:
+  Is there a maximum system RAM size that is supported by swsusp?
+
+A:
+  It should work okay with highmem.
+
+Q:
+  Does swsusp (to disk) use only one swap partition or can it use
+  multiple swap partitions (aggregate them into one logical space)?
+
+A:
+  Only one swap partition, sorry.
+
+Q:
+  If my application(s) causes lots of memory & swap space to be used
+  (over half of the total system RAM), is it correct that it is likely
+  to be useless to try to suspend to disk while that app is running?
+
+A:
+  No, it should work okay, as long as your app does not mlock()
+  it. Just prepare big enough swap partition.
+
+Q:
+  What information is useful for debugging suspend-to-disk problems?
+
+A:
+  Well, last messages on the screen are always useful. If something
+  is broken, it is usually some kernel driver, therefore trying with as
+  little as possible modules loaded helps a lot. I also prefer people to
+  suspend from console, preferably without X running. Booting with
+  init=/bin/bash, then swapon and starting suspend sequence manually
+  usually does the trick. Then it is good idea to try with latest
+  vanilla kernel.
+
+Q:
+  How can distributions ship a swsusp-supporting kernel with modular
+  disk drivers (especially SATA)?
+
+A:
+  Well, it can be done, load the drivers, then do echo into
+  /sys/power/resume file from initrd. Be sure not to mount
+  anything, not even read-only mount, or you are going to lose your
+  data.
+
+Q:
+  How do I make suspend more verbose?
+
+A:
+  If you want to see any non-error kernel messages on the virtual
+  terminal the kernel switches to during suspend, you have to set the
+  kernel console loglevel to at least 4 (KERN_WARNING), for example by
+  doing::
+
+	# save the old loglevel
+	read LOGLEVEL DUMMY < /proc/sys/kernel/printk
+	# set the loglevel so we see the progress bar.
+	# if the level is higher than needed, we leave it alone.
+	if [ $LOGLEVEL -lt 5 ]; then
+	        echo 5 > /proc/sys/kernel/printk
+		fi
+
+        IMG_SZ=0
+        read IMG_SZ < /sys/power/image_size
+        echo -n disk > /sys/power/state
+        RET=$?
+        #
+        # the logic here is:
+        # if image_size > 0 (without kernel support, IMG_SZ will be zero),
+        # then try again with image_size set to zero.
+	if [ $RET -ne 0 -a $IMG_SZ -ne 0 ]; then # try again with minimal image size
+                echo 0 > /sys/power/image_size
+                echo -n disk > /sys/power/state
+                RET=$?
+        fi
+
+	# restore previous loglevel
+	echo $LOGLEVEL > /proc/sys/kernel/printk
+	exit $RET
+
+Q:
+  Is this true that if I have a mounted filesystem on a USB device and
+  I suspend to disk, I can lose data unless the filesystem has been mounted
+  with "sync"?
+
+A:
+  That's right ... if you disconnect that device, you may lose data.
+  In fact, even with "-o sync" you can lose data if your programs have
+  information in buffers they haven't written out to a disk you disconnect,
+  or if you disconnect before the device finished saving data you wrote.
+
+  Software suspend normally powers down USB controllers, which is equivalent
+  to disconnecting all USB devices attached to your system.
+
+  Your system might well support low-power modes for its USB controllers
+  while the system is asleep, maintaining the connection, using true sleep
+  modes like "suspend-to-RAM" or "standby".  (Don't write "disk" to the
+  /sys/power/state file; write "standby" or "mem".)  We've not seen any
+  hardware that can use these modes through software suspend, although in
+  theory some systems might support "platform" modes that won't break the
+  USB connections.
+
+  Remember that it's always a bad idea to unplug a disk drive containing a
+  mounted filesystem.  That's true even when your system is asleep!  The
+  safest thing is to unmount all filesystems on removable media (such USB,
+  Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays)
+  before suspending; then remount them after resuming.
+
+  There is a work-around for this problem.  For more information, see
+  Documentation/driver-api/usb/persist.rst.
+
+Q:
+  Can I suspend-to-disk using a swap partition under LVM?
+
+A:
+  Yes and No.  You can suspend successfully, but the kernel will not be able
+  to resume on its own.  You need an initramfs that can recognize the resume
+  situation, activate the logical volume containing the swap volume (but not
+  touch any filesystems!), and eventually call::
+
+    echo -n "$major:$minor" > /sys/power/resume
+
+  where $major and $minor are the respective major and minor device numbers of
+  the swap volume.
+
+  uswsusp works with LVM, too.  See http://suspend.sourceforge.net/
+
+Q:
+  I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
+  compiled with the similar configuration files. Anyway I found that
+  suspend to disk (and resume) is much slower on 2.6.16 compared to
+  2.6.15. Any idea for why that might happen or how can I speed it up?
+
+A:
+  This is because the size of the suspend image is now greater than
+  for 2.6.15 (by saving more data we can get more responsive system
+  after resume).
+
+  There's the /sys/power/image_size knob that controls the size of the
+  image.  If you set it to 0 (eg. by echo 0 > /sys/power/image_size as
+  root), the 2.6.15 behavior should be restored.  If it is still too
+  slow, take a look at suspend.sf.net -- userland suspend is faster and
+  supports LZF compression to speed it up further.
diff --git a/Documentation/power/tricks.rst b/Documentation/power/tricks.rst
new file mode 100644
index 000000000..ca787f142
--- /dev/null
+++ b/Documentation/power/tricks.rst
@@ -0,0 +1,29 @@
+================
+swsusp/S3 tricks
+================
+
+Pavel Machek <pavel@ucw.cz>
+
+If you want to trick swsusp/S3 into working, you might want to try:
+
+* go with minimal config, turn off drivers like USB, AGP you don't
+  really need
+
+* turn off APIC and preempt
+
+* use ext2. At least it has working fsck. [If something seems to go
+  wrong, force fsck when you have a chance]
+
+* turn off modules
+
+* use vga text console, shut down X. [If you really want X, you might
+  want to try vesafb later]
+
+* try running as few processes as possible, preferably go to single
+  user mode.
+
+* due to video issues, swsusp should be easier to get working than
+  S3. Try that first.
+
+When you make it work, try to find out what exactly was it that broke
+suspend, and preferably fix that.
diff --git a/Documentation/power/userland-swsusp.rst b/Documentation/power/userland-swsusp.rst
new file mode 100644
index 000000000..1cf62d80a
--- /dev/null
+++ b/Documentation/power/userland-swsusp.rst
@@ -0,0 +1,193 @@
+=====================================================
+Documentation for userland software suspend interface
+=====================================================
+
+	(C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
+
+First, the warnings at the beginning of swsusp.txt still apply.
+
+Second, you should read the FAQ in swsusp.txt _now_ if you have not
+done it already.
+
+Now, to use the userland interface for software suspend you need special
+utilities that will read/write the system memory snapshot from/to the
+kernel.  Such utilities are available, for example, from
+<http://suspend.sourceforge.net>.  You may want to have a look at them if you
+are going to develop your own suspend/resume utilities.
+
+The interface consists of a character device providing the open(),
+release(), read(), and write() operations as well as several ioctl()
+commands defined in include/linux/suspend_ioctls.h .  The major and minor
+numbers of the device are, respectively, 10 and 231, and they can
+be read from /sys/class/misc/snapshot/dev.
+
+The device can be open either for reading or for writing.  If open for
+reading, it is considered to be in the suspend mode.  Otherwise it is
+assumed to be in the resume mode.  The device cannot be open for simultaneous
+reading and writing.  It is also impossible to have the device open more than
+once at a time.
+
+Even opening the device has side effects. Data structures are
+allocated, and PM_HIBERNATION_PREPARE / PM_RESTORE_PREPARE chains are
+called.
+
+The ioctl() commands recognized by the device are:
+
+SNAPSHOT_FREEZE
+	freeze user space processes (the current process is
+	not frozen); this is required for SNAPSHOT_CREATE_IMAGE
+	and SNAPSHOT_ATOMIC_RESTORE to succeed
+
+SNAPSHOT_UNFREEZE
+	thaw user space processes frozen by SNAPSHOT_FREEZE
+
+SNAPSHOT_CREATE_IMAGE
+	create a snapshot of the system memory; the
+	last argument of ioctl() should be a pointer to an int variable,
+	the value of which will indicate whether the call returned after
+	creating the snapshot (1) or after restoring the system memory state
+	from it (0) (after resume the system finds itself finishing the
+	SNAPSHOT_CREATE_IMAGE ioctl() again); after the snapshot
+	has been created the read() operation can be used to transfer
+	it out of the kernel
+
+SNAPSHOT_ATOMIC_RESTORE
+	restore the system memory state from the
+	uploaded snapshot image; before calling it you should transfer
+	the system memory snapshot back to the kernel using the write()
+	operation; this call will not succeed if the snapshot
+	image is not available to the kernel
+
+SNAPSHOT_FREE
+	free memory allocated for the snapshot image
+
+SNAPSHOT_PREF_IMAGE_SIZE
+	set the preferred maximum size of the image
+	(the kernel will do its best to ensure the image size will not exceed
+	this number, but if it turns out to be impossible, the kernel will
+	create the smallest image possible)
+
+SNAPSHOT_GET_IMAGE_SIZE
+	return the actual size of the hibernation image
+	(the last argument should be a pointer to a loff_t variable that
+	will contain the result if the call is successful)
+
+SNAPSHOT_AVAIL_SWAP_SIZE
+	return the amount of available swap in bytes
+	(the last argument should be a pointer to a loff_t variable that
+	will contain the result if the call is successful)
+
+SNAPSHOT_ALLOC_SWAP_PAGE
+	allocate a swap page from the resume partition
+	(the last argument should be a pointer to a loff_t variable that
+	will contain the swap page offset if the call is successful)
+
+SNAPSHOT_FREE_SWAP_PAGES
+	free all swap pages allocated by
+	SNAPSHOT_ALLOC_SWAP_PAGE
+
+SNAPSHOT_SET_SWAP_AREA
+	set the resume partition and the offset (in <PAGE_SIZE>
+	units) from the beginning of the partition at which the swap header is
+	located (the last ioctl() argument should point to a struct
+	resume_swap_area, as defined in kernel/power/suspend_ioctls.h,
+	containing the resume device specification and the offset); for swap
+	partitions the offset is always 0, but it is different from zero for
+	swap files (see Documentation/power/swsusp-and-swap-files.rst for
+	details).
+
+SNAPSHOT_PLATFORM_SUPPORT
+	enable/disable the hibernation platform support,
+	depending on the argument value (enable, if the argument is nonzero)
+
+SNAPSHOT_POWER_OFF
+	make the kernel transition the system to the hibernation
+	state (eg. ACPI S4) using the platform (eg. ACPI) driver
+
+SNAPSHOT_S2RAM
+	suspend to RAM; using this call causes the kernel to
+	immediately enter the suspend-to-RAM state, so this call must always
+	be preceded by the SNAPSHOT_FREEZE call and it is also necessary
+	to use the SNAPSHOT_UNFREEZE call after the system wakes up.  This call
+	is needed to implement the suspend-to-both mechanism in which the
+	suspend image is first created, as though the system had been suspended
+	to disk, and then the system is suspended to RAM (this makes it possible
+	to resume the system from RAM if there's enough battery power or restore
+	its state on the basis of the saved suspend image otherwise)
+
+The device's read() operation can be used to transfer the snapshot image from
+the kernel.  It has the following limitations:
+
+- you cannot read() more than one virtual memory page at a time
+- read()s across page boundaries are impossible (ie. if you read() 1/2 of
+  a page in the previous call, you will only be able to read()
+  **at most** 1/2 of the page in the next call)
+
+The device's write() operation is used for uploading the system memory snapshot
+into the kernel.  It has the same limitations as the read() operation.
+
+The release() operation frees all memory allocated for the snapshot image
+and all swap pages allocated with SNAPSHOT_ALLOC_SWAP_PAGE (if any).
+Thus it is not necessary to use either SNAPSHOT_FREE or
+SNAPSHOT_FREE_SWAP_PAGES before closing the device (in fact it will also
+unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
+still frozen when the device is being closed).
+
+Currently it is assumed that the userland utilities reading/writing the
+snapshot image from/to the kernel will use a swap partition, called the resume
+partition, or a swap file as storage space (if a swap file is used, the resume
+partition is the partition that holds this file).  However, this is not really
+required, as they can use, for example, a special (blank) suspend partition or
+a file on a partition that is unmounted before SNAPSHOT_CREATE_IMAGE and
+mounted afterwards.
+
+These utilities MUST NOT make any assumptions regarding the ordering of
+data within the snapshot image.  The contents of the image are entirely owned
+by the kernel and its structure may be changed in future kernel releases.
+
+The snapshot image MUST be written to the kernel unaltered (ie. all of the image
+data, metadata and header MUST be written in _exactly_ the same amount, form
+and order in which they have been read).  Otherwise, the behavior of the
+resumed system may be totally unpredictable.
+
+While executing SNAPSHOT_ATOMIC_RESTORE the kernel checks if the
+structure of the snapshot image is consistent with the information stored
+in the image header.  If any inconsistencies are detected,
+SNAPSHOT_ATOMIC_RESTORE will not succeed.  Still, this is not a fool-proof
+mechanism and the userland utilities using the interface SHOULD use additional
+means, such as checksums, to ensure the integrity of the snapshot image.
+
+The suspending and resuming utilities MUST lock themselves in memory,
+preferably using mlockall(), before calling SNAPSHOT_FREEZE.
+
+The suspending utility MUST check the value stored by SNAPSHOT_CREATE_IMAGE
+in the memory location pointed to by the last argument of ioctl() and proceed
+in accordance with it:
+
+1. 	If the value is 1 (ie. the system memory snapshot has just been
+	created and the system is ready for saving it):
+
+	(a)	The suspending utility MUST NOT close the snapshot device
+		_unless_ the whole suspend procedure is to be cancelled, in
+		which case, if the snapshot image has already been saved, the
+		suspending utility SHOULD destroy it, preferably by zapping
+		its header.  If the suspend is not to be cancelled, the
+		system MUST be powered off or rebooted after the snapshot
+		image has been saved.
+	(b)	The suspending utility SHOULD NOT attempt to perform any
+		file system operations (including reads) on the file systems
+		that were mounted before SNAPSHOT_CREATE_IMAGE has been
+		called.  However, it MAY mount a file system that was not
+		mounted at that time and perform some operations on it (eg.
+		use it for saving the image).
+
+2.	If the value is 0 (ie. the system state has just been restored from
+	the snapshot image), the suspending utility MUST close the snapshot
+	device.  Afterwards it will be treated as a regular userland process,
+	so it need not exit.
+
+The resuming utility SHOULD NOT attempt to mount any file systems that could
+be mounted before suspend and SHOULD NOT attempt to perform any operations
+involving such file systems.
+
+For details, please refer to the source code.
diff --git a/Documentation/power/video.rst b/Documentation/power/video.rst
new file mode 100644
index 000000000..337a2ba9f
--- /dev/null
+++ b/Documentation/power/video.rst
@@ -0,0 +1,213 @@
+===========================
+Video issues with S3 resume
+===========================
+
+2003-2006, Pavel Machek
+
+During S3 resume, hardware needs to be reinitialized. For most
+devices, this is easy, and kernel driver knows how to do
+it. Unfortunately there's one exception: video card. Those are usually
+initialized by BIOS, and kernel does not have enough information to
+boot video card. (Kernel usually does not even contain video card
+driver -- vesafb and vgacon are widely used).
+
+This is not problem for swsusp, because during swsusp resume, BIOS is
+run normally so video card is normally initialized. It should not be
+problem for S1 standby, because hardware should retain its state over
+that.
+
+We either have to run video BIOS during early resume, or interpret it
+using vbetool later, or maybe nothing is necessary on particular
+system because video state is preserved. Unfortunately different
+methods work on different systems, and no known method suits all of
+them.
+
+Userland application called s2ram has been developed; it contains long
+whitelist of systems, and automatically selects working method for a
+given system. It can be downloaded from CVS at
+www.sf.net/projects/suspend . If you get a system that is not in the
+whitelist, please try to find a working solution, and submit whitelist
+entry so that work does not need to be repeated.
+
+Currently, VBE_SAVE method (6 below) works on most
+systems. Unfortunately, vbetool only runs after userland is resumed,
+so it makes debugging of early resume problems
+hard/impossible. Methods that do not rely on userland are preferable.
+
+Details
+~~~~~~~
+
+There are a few types of systems where video works after S3 resume:
+
+(1) systems where video state is preserved over S3.
+
+(2) systems where it is possible to call the video BIOS during S3
+    resume. Unfortunately, it is not correct to call the video BIOS at
+    that point, but it happens to work on some machines. Use
+    acpi_sleep=s3_bios.
+
+(3) systems that initialize video card into vga text mode and where
+    the BIOS works well enough to be able to set video mode. Use
+    acpi_sleep=s3_mode on these.
+
+(4) on some systems s3_bios kicks video into text mode, and
+    acpi_sleep=s3_bios,s3_mode is needed.
+
+(5) radeon systems, where X can soft-boot your video card. You'll need
+    a new enough X, and a plain text console (no vesafb or radeonfb). See
+    http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information.
+    Alternatively, you should use vbetool (6) instead.
+
+(6) other radeon systems, where vbetool is enough to bring system back
+    to life. It needs text console to be working. Do vbetool vbestate
+    save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool
+    vbestate restore < /tmp/delme; setfont <whatever>, and your video
+    should work.
+
+(7) on some systems, it is possible to boot most of kernel, and then
+    POSTing bios works. Ole Rohne has patch to do just that at
+    http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
+
+(8) on some systems, you can use the video_post utility and or
+    do echo 3 > /sys/power/state  && /usr/sbin/video_post - which will
+    initialize the display in console mode. If you are in X, you can switch
+    to a virtual terminal and back to X using  CTRL+ALT+F1 - CTRL+ALT+F7 to get
+    the display working in graphical mode again.
+
+Now, if you pass acpi_sleep=something, and it does not work with your
+bios, you'll get a hard crash during resume. Be careful. Also it is
+safest to do your experiments with plain old VGA console. The vesafb
+and radeonfb (etc) drivers have a tendency to crash the machine during
+resume.
+
+You may have a system where none of above works. At that point you
+either invent another ugly hack that works, or write proper driver for
+your video card (good luck getting docs :-(). Maybe suspending from X
+(proper X, knowing your hardware, not XF68_FBcon) might have better
+chance of working.
+
+Table of known working notebooks:
+
+
+=============================== ===============================================
+Model                           hack (or "how to do it")
+=============================== ===============================================
+Acer Aspire 1406LC		ole's late BIOS init (7), turn off DRI
+Acer TM 230			s3_bios (2)
+Acer TM 242FX			vbetool (6)
+Acer TM C110			video_post (8)
+Acer TM C300                    vga=normal (only suspend on console, not in X),
+				vbetool (6) or video_post (8)
+Acer TM 4052LCi		        s3_bios (2)
+Acer TM 636Lci			s3_bios,s3_mode (4)
+Acer TM 650 (Radeon M7)		vga=normal plus boot-radeon (5) gets text
+				console back
+Acer TM 660			??? [#f1]_
+Acer TM 800			vga=normal, X patches, see webpage (5)
+				or vbetool (6)
+Acer TM 803			vga=normal, X patches, see webpage (5)
+				or vbetool (6)
+Acer TM 803LCi			vga=normal, vbetool (6)
+Arima W730a			vbetool needed (6)
+Asus L2400D                     s3_mode (3) [#f2]_ (S1 also works OK)
+Asus L3350M (SiS 740)           (6)
+Asus L3800C (Radeon M7)		s3_bios (2) (S1 also works OK)
+Asus M6887Ne			vga=normal, s3_bios (2), use radeon driver
+				instead of fglrx in x.org
+Athlon64 desktop prototype	s3_bios (2)
+Compal CL-50			??? [#f1]_
+Compaq Armada E500 - P3-700     none (1) (S1 also works OK)
+Compaq Evo N620c		vga=normal, s3_bios (2)
+Dell 600m, ATI R250 Lf		none (1), but needs xorg-x11-6.8.1.902-1
+Dell D600, ATI RV250            vga=normal and X, or try vbestate (6)
+Dell D610			vga=normal and X (possibly vbestate (6) too,
+				but not tested)
+Dell Inspiron 4000		??? [#f1]_
+Dell Inspiron 500m		??? [#f1]_
+Dell Inspiron 510m		???
+Dell Inspiron 5150		vbetool needed (6)
+Dell Inspiron 600m		??? [#f1]_
+Dell Inspiron 8200		??? [#f1]_
+Dell Inspiron 8500		??? [#f1]_
+Dell Inspiron 8600		??? [#f1]_
+eMachines athlon64 machines	vbetool needed (6) (someone please get
+				me model #s)
+HP NC6000			s3_bios, may not use radeonfb (2);
+				or vbetool (6)
+HP NX7000			??? [#f1]_
+HP Pavilion ZD7000		vbetool post needed, need open-source nv
+				driver for X
+HP Omnibook XE3	athlon version	none (1)
+HP Omnibook XE3GC		none (1), video is S3 Savage/IX-MV
+HP Omnibook XE3L-GF		vbetool (6)
+HP Omnibook 5150		none (1), (S1 also works OK)
+IBM TP T20, model 2647-44G	none (1), video is S3 Inc. 86C270-294
+				Savage/IX-MV, vesafb gets "interesting"
+				but X work.
+IBM TP A31 / Type 2652-M5G      s3_mode (3) [works ok with
+				BIOS 1.04 2002-08-23, but not at all with
+				BIOS 1.11 2004-11-05 :-(]
+IBM TP R32 / Type 2658-MMG      none (1)
+IBM TP R40 2722B3G		??? [#f1]_
+IBM TP R50p / Type 1832-22U     s3_bios (2)
+IBM TP R51			none (1)
+IBM TP T30	236681A		??? [#f1]_
+IBM TP T40 / Type 2373-MU4      none (1)
+IBM TP T40p			none (1)
+IBM TP R40p			s3_bios (2)
+IBM TP T41p			s3_bios (2), switch to X after resume
+IBM TP T42			s3_bios (2)
+IBM ThinkPad T42p (2373-GTG)	s3_bios (2)
+IBM TP X20			??? [#f1]_
+IBM TP X30			s3_bios, s3_mode (4)
+IBM TP X31 / Type 2672-XXH      none (1), use radeontool
+				(http://fdd.com/software/radeon/) to
+				turn off backlight.
+IBM TP X32			none (1), but backlight is on and video is
+				trashed after long suspend. s3_bios,
+				s3_mode (4) works too. Perhaps that gets
+				better results?
+IBM Thinkpad X40 Type 2371-7JG  s3_bios,s3_mode (4)
+IBM TP 600e			none(1), but a switch to console and
+				back to X is needed
+Medion MD4220			??? [#f1]_
+Samsung P35			vbetool needed (6)
+Sharp PC-AR10 (ATI rage)	none (1), backlight does not switch off
+Sony Vaio PCG-C1VRX/K		s3_bios (2)
+Sony Vaio PCG-F403		??? [#f1]_
+Sony Vaio PCG-GRT995MP		none (1), works with 'nv' X driver
+Sony Vaio PCG-GR7/K		none (1), but needs radeonfb, use
+				radeontool (http://fdd.com/software/radeon/)
+				to turn off backlight.
+Sony Vaio PCG-N505SN		??? [#f1]_
+Sony Vaio vgn-s260		X or boot-radeon can init it (5)
+Sony Vaio vgn-S580BH		vga=normal, but suspend from X. Console will
+				be blank unless you return to X.
+Sony Vaio vgn-FS115B		s3_bios (2),s3_mode (4)
+Toshiba Libretto L5		none (1)
+Toshiba Libretto 100CT/110CT    vbetool (6)
+Toshiba Portege 3020CT		s3_mode (3)
+Toshiba Satellite 4030CDT	s3_mode (3) (S1 also works OK)
+Toshiba Satellite 4080XCDT      s3_mode (3) (S1 also works OK)
+Toshiba Satellite 4090XCDT      ??? [#f1]_
+Toshiba Satellite P10-554       s3_bios,s3_mode (4)[#f3]_
+Toshiba M30                     (2) xor X with nvidia driver using internal AGP
+Uniwill 244IIO			??? [#f1]_
+=============================== ===============================================
+
+Known working desktop systems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+=================== ============================= ========================
+Mainboard	    Graphics card                 hack (or "how to do it")
+=================== ============================= ========================
+Asus A7V8X	    nVidia RIVA TNT2 model 64	  s3_bios,s3_mode (4)
+=================== ============================= ========================
+
+
+.. [#f1] from https://wiki.ubuntu.com/HoaryPMResults, not sure
+         which options to use. If you know, please tell me.
+
+.. [#f2] To be tested with a newer kernel.
+
+.. [#f3] Not with SMP kernel, UP only.