Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 452 insertions, 0 deletions

diff --git a/Documentation/usb/usbip_protocol.rst b/Documentation/usb/usbip_protocol.rst
new file mode 100644
index 000000000..adc158967
--- /dev/null
+++ b/Documentation/usb/usbip_protocol.rst
@@ -0,0 +1,452 @@
+===============
+USB/IP protocol
+===============
+
+Architecture
+============
+
+The USB/IP protocol follows a server/client architecture. The server exports the
+USB devices and the clients import them. The device driver for the exported
+USB device runs on the client machine.
+
+The client may ask for the list of the exported USB devices. To get the list the
+client opens a TCP/IP connection to the server, and sends an OP_REQ_DEVLIST
+packet on top of the TCP/IP connection (so the actual OP_REQ_DEVLIST may be sent
+in one or more pieces at the low level transport layer). The server sends back
+the OP_REP_DEVLIST packet which lists the exported USB devices. Finally the
+TCP/IP connection is closed.
+
+::
+
+ virtual host controller                                 usb host
+      "client"                                           "server"
+  (imports USB devices)                             (exports USB devices)
+          |                                                 |
+          |                  OP_REQ_DEVLIST                 |
+          | ----------------------------------------------> |
+          |                                                 |
+          |                  OP_REP_DEVLIST                 |
+          | <---------------------------------------------- |
+          |                                                 |
+
+Once the client knows the list of exported USB devices it may decide to use one
+of them. First the client opens a TCP/IP connection to the server and
+sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the
+import was successful the TCP/IP connection remains open and will be used
+to transfer the URB traffic between the client and the server. The client may
+send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and
+USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the
+server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.
+
+::
+
+ virtual host controller                                 usb host
+      "client"                                           "server"
+  (imports USB devices)                             (exports USB devices)
+          |                                                 |
+          |                  OP_REQ_IMPORT                  |
+          | ----------------------------------------------> |
+          |                                                 |
+          |                  OP_REP_IMPORT                  |
+          | <---------------------------------------------- |
+          |                                                 |
+          |                                                 |
+          |            USBIP_CMD_SUBMIT(seqnum = n)         |
+          | ----------------------------------------------> |
+          |                                                 |
+          |            USBIP_RET_SUBMIT(seqnum = n)         |
+          | <---------------------------------------------- |
+          |                        .                        |
+          |                        :                        |
+          |                                                 |
+          |            USBIP_CMD_SUBMIT(seqnum = m)         |
+          | ----------------------------------------------> |
+          |                                                 |
+          |            USBIP_CMD_SUBMIT(seqnum = m+1)       |
+          | ----------------------------------------------> |
+          |                                                 |
+          |            USBIP_CMD_SUBMIT(seqnum = m+2)       |
+          | ----------------------------------------------> |
+          |                                                 |
+          |            USBIP_RET_SUBMIT(seqnum = m)         |
+          | <---------------------------------------------- |
+          |                                                 |
+          |            USBIP_CMD_SUBMIT(seqnum = m+3)       |
+          | ----------------------------------------------> |
+          |                                                 |
+          |            USBIP_RET_SUBMIT(seqnum = m+1)       |
+          | <---------------------------------------------- |
+          |                                                 |
+          |            USBIP_CMD_SUBMIT(seqnum = m+4)       |
+          | ----------------------------------------------> |
+          |                                                 |
+          |            USBIP_RET_SUBMIT(seqnum = m+2)       |
+          | <---------------------------------------------- |
+          |                        .                        |
+          |                        :                        |
+
+For UNLINK, note that after a successful USBIP_RET_UNLINK, the unlinked URB
+submission would not have a corresponding USBIP_RET_SUBMIT (this is explained in
+function stub_recv_cmd_unlink of drivers/usb/usbip/stub_rx.c).
+
+::
+
+ virtual host controller                                 usb host
+      "client"                                           "server"
+  (imports USB devices)                             (exports USB devices)
+          |                                                 |
+          |            USBIP_CMD_SUBMIT(seqnum = p)         |
+          | ----------------------------------------------> |
+          |                                                 |
+          |               USBIP_CMD_UNLINK                  |
+          |         (seqnum = p+1, unlink_seqnum = p)       |
+          | ----------------------------------------------> |
+          |                                                 |
+          |               USBIP_RET_UNLINK                  |
+          |        (seqnum = p+1, status = -ECONNRESET)     |
+          | <---------------------------------------------- |
+          |                                                 |
+          |         Note: No USBIP_RET_SUBMIT(seqnum = p)   |
+          | <--X---X---X---X---X---X---X---X---X---X---X--- |
+          |                        .                        |
+          |                        :                        |
+          |                                                 |
+          |            USBIP_CMD_SUBMIT(seqnum = q)         |
+          | ----------------------------------------------> |
+          |                                                 |
+          |            USBIP_RET_SUBMIT(seqnum = q)         |
+          | <---------------------------------------------- |
+          |                                                 |
+          |               USBIP_CMD_UNLINK                  |
+          |         (seqnum = q+1, unlink_seqnum = q)       |
+          | ----------------------------------------------> |
+          |                                                 |
+          |               USBIP_RET_UNLINK                  |
+          |           (seqnum = q+1, status = 0)            |
+          | <---------------------------------------------- |
+          |                                                 |
+
+The fields are in network (big endian) byte order meaning that the most significant
+byte (MSB) is stored at the lowest address.
+
+Protocol Version
+================
+
+The documented USBIP version is v1.1.1. The binary representation of this
+version in message headers is 0x0111.
+
+This is defined in tools/usb/usbip/configure.ac
+
+Message Format
+==============
+
+OP_REQ_DEVLIST:
+	Retrieve the list of exported USB devices.
+
++-----------+--------+------------+---------------------------------------------------+
+| Offset    | Length | Value      | Description                                       |
++===========+========+============+===================================================+
+| 0         | 2      |            | USBIP version                                     |
++-----------+--------+------------+---------------------------------------------------+
+| 2         | 2      | 0x8005     | Command code: Retrieve the list of exported USB   |
+|           |        |            | devices.                                          |
++-----------+--------+------------+---------------------------------------------------+
+| 4         | 4      | 0x00000000 | Status: unused, shall be set to 0                 |
++-----------+--------+------------+---------------------------------------------------+
+
+OP_REP_DEVLIST:
+	Reply with the list of exported USB devices.
+
++-----------+--------+------------+---------------------------------------------------+
+| Offset    | Length | Value      | Description                                       |
++===========+========+============+===================================================+
+| 0         | 2      |            | USBIP version                                     |
++-----------+--------+------------+---------------------------------------------------+
+| 2         | 2      | 0x0005     | Reply code: The list of exported USB devices.     |
++-----------+--------+------------+---------------------------------------------------+
+| 4         | 4      | 0x00000000 | Status: 0 for OK                                  |
++-----------+--------+------------+---------------------------------------------------+
+| 8         | 4      | n          | Number of exported devices: 0 means no exported   |
+|           |        |            | devices.                                          |
++-----------+--------+------------+---------------------------------------------------+
+| 0x0C      |        |            | From now on the exported n devices are described, |
+|           |        |            | if any. If no devices are exported the message    |
+|           |        |            | ends with the previous "number of exported        |
+|           |        |            | devices" field.                                   |
++-----------+--------+------------+---------------------------------------------------+
+|           | 256    |            | path: Path of the device on the host exporting the|
+|           |        |            | USB device, string closed with zero byte, e.g.    |
+|           |        |            | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2"   |
+|           |        |            | The unused bytes shall be filled with zero        |
+|           |        |            | bytes.                                            |
++-----------+--------+------------+---------------------------------------------------+
+| 0x10C     | 32     |            | busid: Bus ID of the exported device, string      |
+|           |        |            | closed with zero byte, e.g. "3-2". The unused     |
+|           |        |            | bytes shall be filled with zero bytes.            |
++-----------+--------+------------+---------------------------------------------------+
+| 0x12C     | 4      |            | busnum                                            |
++-----------+--------+------------+---------------------------------------------------+
+| 0x130     | 4      |            | devnum                                            |
++-----------+--------+------------+---------------------------------------------------+
+| 0x134     | 4      |            | speed                                             |
++-----------+--------+------------+---------------------------------------------------+
+| 0x138     | 2      |            | idVendor                                          |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13A     | 2      |            | idProduct                                         |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13C     | 2      |            | bcdDevice                                         |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13E     | 1      |            | bDeviceClass                                      |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13F     | 1      |            | bDeviceSubClass                                   |
++-----------+--------+------------+---------------------------------------------------+
+| 0x140     | 1      |            | bDeviceProtocol                                   |
++-----------+--------+------------+---------------------------------------------------+
+| 0x141     | 1      |            | bConfigurationValue                               |
++-----------+--------+------------+---------------------------------------------------+
+| 0x142     | 1      |            | bNumConfigurations                                |
++-----------+--------+------------+---------------------------------------------------+
+| 0x143     | 1      |            | bNumInterfaces                                    |
++-----------+--------+------------+---------------------------------------------------+
+| 0x144     |        | m_0        | From now on each interface is described, all      |
+|           |        |            | together bNumInterfaces times, with the following |
+|           |        |            | 4 fields:                                         |
++-----------+--------+------------+---------------------------------------------------+
+|           | 1      |            | bInterfaceClass                                   |
++-----------+--------+------------+---------------------------------------------------+
+| 0x145     | 1      |            | bInterfaceSubClass                                |
++-----------+--------+------------+---------------------------------------------------+
+| 0x146     | 1      |            | bInterfaceProtocol                                |
++-----------+--------+------------+---------------------------------------------------+
+| 0x147     | 1      |            | padding byte for alignment, shall be set to zero  |
++-----------+--------+------------+---------------------------------------------------+
+| 0xC +     |        |            | The second exported USB device starts at i=1      |
+| i*0x138 + |        |            | with the path field.                              |
+| m_(i-1)*4 |        |            |                                                   |
++-----------+--------+------------+---------------------------------------------------+
+
+OP_REQ_IMPORT:
+	Request to import (attach) a remote USB device.
+
++-----------+--------+------------+---------------------------------------------------+
+| Offset    | Length | Value      | Description                                       |
++===========+========+============+===================================================+
+| 0         | 2      |            | USBIP version                                     |
++-----------+--------+------------+---------------------------------------------------+
+| 2         | 2      | 0x8003     | Command code: import a remote USB device.         |
++-----------+--------+------------+---------------------------------------------------+
+| 4         | 4      | 0x00000000 | Status: unused, shall be set to 0                 |
++-----------+--------+------------+---------------------------------------------------+
+| 8         | 32     |            | busid: the busid of the exported device on the    |
+|           |        |            | remote host. The possible values are taken        |
+|           |        |            | from the message field OP_REP_DEVLIST.busid.      |
+|           |        |            | A string closed with zero, the unused bytes       |
+|           |        |            | shall be filled with zeros.                       |
++-----------+--------+------------+---------------------------------------------------+
+
+OP_REP_IMPORT:
+	Reply to import (attach) a remote USB device.
+
++-----------+--------+------------+---------------------------------------------------+
+| Offset    | Length | Value      | Description                                       |
++===========+========+============+===================================================+
+| 0         | 2      |            | USBIP version                                     |
++-----------+--------+------------+---------------------------------------------------+
+| 2         | 2      | 0x0003     | Reply code: Reply to import.                      |
++-----------+--------+------------+---------------------------------------------------+
+| 4         | 4      | 0x00000000 | Status:                                           |
+|           |        |            |                                                   |
+|           |        |            |   - 0 for OK                                      |
+|           |        |            |   - 1 for error                                   |
++-----------+--------+------------+---------------------------------------------------+
+| 8         |        |            | From now on comes the details of the imported     |
+|           |        |            | device, if the previous status field was OK (0),  |
+|           |        |            | otherwise the reply ends with the status field.   |
++-----------+--------+------------+---------------------------------------------------+
+|           | 256    |            | path: Path of the device on the host exporting the|
+|           |        |            | USB device, string closed with zero byte, e.g.    |
+|           |        |            | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2"   |
+|           |        |            | The unused bytes shall be filled with zero        |
+|           |        |            | bytes.                                            |
++-----------+--------+------------+---------------------------------------------------+
+| 0x108     | 32     |            | busid: Bus ID of the exported device, string      |
+|           |        |            | closed with zero byte, e.g. "3-2". The unused     |
+|           |        |            | bytes shall be filled with zero bytes.            |
++-----------+--------+------------+---------------------------------------------------+
+| 0x128     | 4      |            | busnum                                            |
++-----------+--------+------------+---------------------------------------------------+
+| 0x12C     | 4      |            | devnum                                            |
++-----------+--------+------------+---------------------------------------------------+
+| 0x130     | 4      |            | speed                                             |
++-----------+--------+------------+---------------------------------------------------+
+| 0x134     | 2      |            | idVendor                                          |
++-----------+--------+------------+---------------------------------------------------+
+| 0x136     | 2      |            | idProduct                                         |
++-----------+--------+------------+---------------------------------------------------+
+| 0x138     | 2      |            | bcdDevice                                         |
++-----------+--------+------------+---------------------------------------------------+
+| 0x139     | 1      |            | bDeviceClass                                      |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13A     | 1      |            | bDeviceSubClass                                   |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13B     | 1      |            | bDeviceProtocol                                   |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13C     | 1      |            | bConfigurationValue                               |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13D     | 1      |            | bNumConfigurations                                |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13E     | 1      |            | bNumInterfaces                                    |
++-----------+--------+------------+---------------------------------------------------+
+
+The following four commands have a common basic header called
+'usbip_header_basic', and their headers, called 'usbip_header' (before
+transfer_buffer payload), have the same length, therefore paddings are needed.
+
+usbip_header_basic:
+
++-----------+--------+---------------------------------------------------+
+| Offset    | Length | Description                                       |
++===========+========+===================================================+
+| 0         | 4      | command                                           |
++-----------+--------+---------------------------------------------------+
+| 4         | 4      | seqnum: sequential number that identifies requests|
+|           |        | and corresponding responses;                      |
+|           |        | incremented per connection                        |
++-----------+--------+---------------------------------------------------+
+| 8         | 4      | devid: specifies a remote USB device uniquely     |
+|           |        | instead of busnum and devnum;                     |
+|           |        | for client (request), this value is               |
+|           |        | ((busnum << 16) | devnum);                        |
+|           |        | for server (response), this shall be set to 0     |
++-----------+--------+---------------------------------------------------+
+| 0xC       | 4      | direction:                                        |
+|           |        |                                                   |
+|           |        |    - 0: USBIP_DIR_OUT                             |
+|           |        |    - 1: USBIP_DIR_IN                              |
+|           |        |                                                   |
+|           |        | only used by client, for server this shall be 0   |
++-----------+--------+---------------------------------------------------+
+| 0x10      | 4      | ep: endpoint number                               |
+|           |        | only used by client, for server this shall be 0;  |
+|           |        | for UNLINK, this shall be 0                       |
++-----------+--------+---------------------------------------------------+
+
+USBIP_CMD_SUBMIT:
+	Submit an URB
+
++-----------+--------+---------------------------------------------------+
+| Offset    | Length | Description                                       |
++===========+========+===================================================+
+| 0         | 20     | usbip_header_basic, 'command' shall be 0x00000001 |
++-----------+--------+---------------------------------------------------+
+| 0x14      | 4      | transfer_flags: possible values depend on the     |
+|           |        | USBIP_URB transfer_flags.                         |
+|           |        | Refer to include/uapi/linux/usbip.h and           |
+|           |        | Documentation/driver-api/usb/URB.rst.             |
+|           |        | Refer to usbip_pack_cmd_submit() and              |
+|           |        | tweak_transfer_flags() in drivers/usb/usbip/      |
+|           |        | usbip_common.c.                                   |
++-----------+--------+---------------------------------------------------+
+| 0x18      | 4      | transfer_buffer_length:                           |
+|           |        | use URB transfer_buffer_length                    |
++-----------+--------+---------------------------------------------------+
+| 0x1C      | 4      | start_frame: use URB start_frame;                 |
+|           |        | initial frame for ISO transfer;                   |
+|           |        | shall be set to 0 if not ISO transfer             |
++-----------+--------+---------------------------------------------------+
+| 0x20      | 4      | number_of_packets: number of ISO packets;         |
+|           |        | shall be set to 0xffffffff if not ISO transfer    |
++-----------+--------+---------------------------------------------------+
+| 0x24      | 4      | interval: maximum time for the request on the     |
+|           |        | server-side host controller                       |
++-----------+--------+---------------------------------------------------+
+| 0x28      | 8      | setup: data bytes for USB setup, filled with      |
+|           |        | zeros if not used.                                |
++-----------+--------+---------------------------------------------------+
+| 0x30      | n      | transfer_buffer.                                  |
+|           |        | If direction is USBIP_DIR_OUT then n equals       |
+|           |        | transfer_buffer_length; otherwise n equals 0.     |
+|           |        | For ISO transfers the padding between each ISO    |
+|           |        | packets is not transmitted.                       |
++-----------+--------+---------------------------------------------------+
+| 0x30+n    | m      | iso_packet_descriptor                             |
++-----------+--------+---------------------------------------------------+
+
+USBIP_RET_SUBMIT:
+	Reply for submitting an URB
+
++-----------+--------+---------------------------------------------------+
+| Offset    | Length | Description                                       |
++===========+========+===================================================+
+| 0         | 20     | usbip_header_basic, 'command' shall be 0x00000003 |
++-----------+--------+---------------------------------------------------+
+| 0x14      | 4      | status: zero for successful URB transaction,      |
+|           |        | otherwise some kind of error happened.            |
++-----------+--------+---------------------------------------------------+
+| 0x18      | 4      | actual_length: number of URB data bytes;          |
+|           |        | use URB actual_length                             |
++-----------+--------+---------------------------------------------------+
+| 0x1C      | 4      | start_frame: use URB start_frame;                 |
+|           |        | initial frame for ISO transfer;                   |
+|           |        | shall be set to 0 if not ISO transfer             |
++-----------+--------+---------------------------------------------------+
+| 0x20      | 4      | number_of_packets: number of ISO packets;         |
+|           |        | shall be set to 0xffffffff if not ISO transfer    |
++-----------+--------+---------------------------------------------------+
+| 0x24      | 4      | error_count                                       |
++-----------+--------+---------------------------------------------------+
+| 0x28      | 8      | padding, shall be set to 0                        |
++-----------+--------+---------------------------------------------------+
+| 0x30      | n      | transfer_buffer.                                  |
+|           |        | If direction is USBIP_DIR_IN then n equals        |
+|           |        | actual_length; otherwise n equals 0.              |
+|           |        | For ISO transfers the padding between each ISO    |
+|           |        | packets is not transmitted.                       |
++-----------+--------+---------------------------------------------------+
+| 0x30+n    | m      | iso_packet_descriptor                             |
++-----------+--------+---------------------------------------------------+
+
+USBIP_CMD_UNLINK:
+	Unlink an URB
+
++-----------+--------+---------------------------------------------------+
+| Offset    | Length | Description                                       |
++===========+========+===================================================+
+| 0         | 20     | usbip_header_basic, 'command' shall be 0x00000002 |
++-----------+--------+---------------------------------------------------+
+| 0x14      | 4      | unlink_seqnum, of the SUBMIT request to unlink    |
++-----------+--------+---------------------------------------------------+
+| 0x18      | 24     | padding, shall be set to 0                        |
++-----------+--------+---------------------------------------------------+
+
+USBIP_RET_UNLINK:
+	Reply for URB unlink
+
++-----------+--------+---------------------------------------------------+
+| Offset    | Length | Description                                       |
++===========+========+===================================================+
+| 0         | 20     | usbip_header_basic, 'command' shall be 0x00000004 |
++-----------+--------+---------------------------------------------------+
+| 0x14      | 4      | status: This is similar to the status of          |
+|           |        | USBIP_RET_SUBMIT (share the same memory offset).  |
+|           |        | When UNLINK is successful, status is -ECONNRESET; |
+|           |        | when USBIP_CMD_UNLINK is after USBIP_RET_SUBMIT   |
+|           |        | status is 0                                       |
++-----------+--------+---------------------------------------------------+
+| 0x18      | 24     | padding, shall be set to 0                        |
++-----------+--------+---------------------------------------------------+
+
+EXAMPLE
+=======
+
+  The following data is captured from wire with Human Interface Devices (HID)
+  payload
+
+::
+
+  CmdIntrIN:  00000001 00000d05 0001000f 00000001 00000001 00000200 00000040 ffffffff 00000000 00000004 00000000 00000000
+  CmdIntrOUT: 00000001 00000d06 0001000f 00000000 00000001 00000000 00000040 ffffffff 00000000 00000004 00000000 00000000
+              ffffffff860008a784ce5ae212376300000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
+  RetIntrOut: 00000003 00000d06 00000000 00000000 00000000 00000000 00000040 ffffffff 00000000 00000000 00000000 00000000
+  RetIntrIn:  00000003 00000d05 00000000 00000000 00000000 00000000 00000040 ffffffff 00000000 00000000 00000000 00000000
+              ffffffff860011a784ce5ae2123763612891b1020100000400000000000000000000000000000000000000000000000000000000000000000000000000000000