Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

206 files changed, 28046 insertions, 0 deletions

diff --git a/arch/arc/Kbuild b/arch/arc/Kbuild
new file mode 100644
index 000000000..b94102fff
--- /dev/null
+++ b/arch/arc/Kbuild
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += kernel/
+obj-y += mm/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
new file mode 100644
index 000000000..cb1074f74
--- /dev/null
+++ b/arch/arc/Kconfig
@@ -0,0 +1,563 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+
+config ARC
+	def_bool y
+	select ARC_TIMERS
+	select ARCH_HAS_CACHE_LINE_SIZE
+	select ARCH_HAS_DEBUG_VM_PGTABLE
+	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_PTE_SPECIAL
+	select ARCH_HAS_SETUP_DMA_OPS
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
+	select ARCH_32BIT_OFF_T
+	select BUILDTIME_TABLE_SORT
+	select CLONE_BACKWARDS
+	select COMMON_CLK
+	select DMA_DIRECT_REMAP
+	select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
+	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
+	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
+	select GENERIC_PENDING_IRQ if SMP
+	select GENERIC_SCHED_CLOCK
+	select GENERIC_SMP_IDLE_THREAD
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARC_MMU_V4
+	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_IOREMAP_PROT
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZMA
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_MOD_ARCH_SPECIFIC
+	select HAVE_PERF_EVENTS
+	select HAVE_SYSCALL_TRACEPOINTS
+	select IRQ_DOMAIN
+	select LOCK_MM_AND_FIND_VMA
+	select MODULES_USE_ELF_RELA
+	select OF
+	select OF_EARLY_FLATTREE
+	select PCI_SYSCALL if PCI
+	select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
+	select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32
+	select TRACE_IRQFLAGS_SUPPORT
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config SCHED_OMIT_FRAME_POINTER
+	def_bool y
+
+config GENERIC_CSUM
+	def_bool y
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+
+config MMU
+	def_bool y
+
+config NO_IOPORT_MAP
+	def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+	select STACKTRACE
+
+menu "ARC Architecture Configuration"
+
+menu "ARC Platform/SoC/Board"
+
+source "arch/arc/plat-tb10x/Kconfig"
+source "arch/arc/plat-axs10x/Kconfig"
+source "arch/arc/plat-hsdk/Kconfig"
+
+endmenu
+
+choice
+	prompt "ARC Instruction Set"
+	default ISA_ARCV2
+
+config ISA_ARCOMPACT
+	bool "ARCompact ISA"
+	select CPU_NO_EFFICIENT_FFS
+	help
+	  The original ARC ISA of ARC600/700 cores
+
+config ISA_ARCV2
+	bool "ARC ISA v2"
+	select ARC_TIMERS_64BIT
+	help
+	  ISA for the Next Generation ARC-HS cores
+
+endchoice
+
+menu "ARC CPU Configuration"
+
+choice
+	prompt "ARC Core"
+	default ARC_CPU_770 if ISA_ARCOMPACT
+	default ARC_CPU_HS if ISA_ARCV2
+
+config ARC_CPU_770
+	bool "ARC770"
+	depends on ISA_ARCOMPACT
+	select ARC_HAS_SWAPE
+	help
+	  Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
+	  This core has a bunch of cool new features:
+	  -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
+	           Shared Address Spaces (for sharing TLB entries in MMU)
+	  -Caches: New Prog Model, Region Flush
+	  -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
+
+config ARC_CPU_HS
+	bool "ARC-HS"
+	depends on ISA_ARCV2
+	help
+	  Support for ARC HS38x Cores based on ARCv2 ISA
+	  The notable features are:
+	    - SMP configurations of up to 4 cores with coherency
+	    - Optional L2 Cache and IO-Coherency
+	    - Revised Interrupt Architecture (multiple priorites, reg banks,
+	        auto stack switch, auto regfile save/restore)
+	    - MMUv4 (PIPT dcache, Huge Pages)
+	    - Instructions for
+		* 64bit load/store: LDD, STD
+		* Hardware assisted divide/remainder: DIV, REM
+		* Function prologue/epilogue: ENTER_S, LEAVE_S
+		* IRQ enable/disable: CLRI, SETI
+		* pop count: FFS, FLS
+		* SETcc, BMSKN, XBFU...
+
+endchoice
+
+config ARC_TUNE_MCPU
+	string "Override default -mcpu compiler flag"
+	default ""
+	help
+	  Override default -mcpu=xxx compiler flag (which is set depending on
+	  the ISA version) with the specified value.
+	  NOTE: If specified flag isn't supported by current compiler the
+	  ISA default value will be used as a fallback.
+
+config CPU_BIG_ENDIAN
+	bool "Enable Big Endian Mode"
+	help
+	  Build kernel for Big Endian Mode of ARC CPU
+
+config SMP
+	bool "Symmetric Multi-Processing"
+	select ARC_MCIP if ISA_ARCV2
+	help
+	  This enables support for systems with more than one CPU.
+
+if SMP
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
+	default "4"
+
+config ARC_SMP_HALT_ON_RESET
+	bool "Enable Halt-on-reset boot mode"
+	help
+	  In SMP configuration cores can be configured as Halt-on-reset
+	  or they could all start at same time. For Halt-on-reset, non
+	  masters are parked until Master kicks them so they can start off
+	  at designated entry point. For other case, all jump to common
+	  entry point and spin wait for Master's signal.
+
+endif #SMP
+
+config ARC_MCIP
+	bool "ARConnect Multicore IP (MCIP) Support "
+	depends on ISA_ARCV2
+	default y if SMP
+	help
+	  This IP block enables SMP in ARC-HS38 cores.
+	  It provides for cross-core interrupts, multi-core debug
+	  hardware semaphores, shared memory,....
+
+menuconfig ARC_CACHE
+	bool "Enable Cache Support"
+	default y
+
+if ARC_CACHE
+
+config ARC_CACHE_LINE_SHIFT
+	int "Cache Line Length (as power of 2)"
+	range 5 7
+	default "6"
+	help
+	  Starting with ARC700 4.9, Cache line length is configurable,
+	  This option specifies "N", with Line-len = 2 power N
+	  So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
+	  Linux only supports same line lengths for I and D caches.
+
+config ARC_HAS_ICACHE
+	bool "Use Instruction Cache"
+	default y
+
+config ARC_HAS_DCACHE
+	bool "Use Data Cache"
+	default y
+
+config ARC_CACHE_PAGES
+	bool "Per Page Cache Control"
+	default y
+	depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
+	help
+	  This can be used to over-ride the global I/D Cache Enable on a
+	  per-page basis (but only for pages accessed via MMU such as
+	  Kernel Virtual address or User Virtual Address)
+	  TLB entries have a per-page Cache Enable Bit.
+	  Note that Global I/D ENABLE + Per Page DISABLE works but corollary
+	  Global DISABLE + Per Page ENABLE won't work
+
+config ARC_CACHE_VIPT_ALIASING
+	bool "Support VIPT Aliasing D$"
+	depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
+
+endif #ARC_CACHE
+
+config ARC_HAS_ICCM
+	bool "Use ICCM"
+	help
+	  Single Cycle RAMS to store Fast Path Code
+
+config ARC_ICCM_SZ
+	int "ICCM Size in KB"
+	default "64"
+	depends on ARC_HAS_ICCM
+
+config ARC_HAS_DCCM
+	bool "Use DCCM"
+	help
+	  Single Cycle RAMS to store Fast Path Data
+
+config ARC_DCCM_SZ
+	int "DCCM Size in KB"
+	default "64"
+	depends on ARC_HAS_DCCM
+
+config ARC_DCCM_BASE
+	hex "DCCM map address"
+	default "0xA0000000"
+	depends on ARC_HAS_DCCM
+
+choice
+	prompt "MMU Version"
+	default ARC_MMU_V3 if ISA_ARCOMPACT
+	default ARC_MMU_V4 if ISA_ARCV2
+
+config ARC_MMU_V3
+	bool "MMU v3"
+	depends on ISA_ARCOMPACT
+	help
+	  Introduced with ARC700 4.10: New Features
+	  Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
+	  Shared Address Spaces (SASID)
+
+config ARC_MMU_V4
+	bool "MMU v4"
+	depends on ISA_ARCV2
+
+endchoice
+
+
+choice
+	prompt "MMU Page Size"
+	default ARC_PAGE_SIZE_8K
+
+config ARC_PAGE_SIZE_8K
+	bool "8KB"
+	help
+	  Choose between 8k vs 16k
+
+config ARC_PAGE_SIZE_16K
+	bool "16KB"
+
+config ARC_PAGE_SIZE_4K
+	bool "4KB"
+	depends on ARC_MMU_V3 || ARC_MMU_V4
+
+endchoice
+
+choice
+	prompt "MMU Super Page Size"
+	depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
+	default ARC_HUGEPAGE_2M
+
+config ARC_HUGEPAGE_2M
+	bool "2MB"
+
+config ARC_HUGEPAGE_16M
+	bool "16MB"
+
+endchoice
+
+config PGTABLE_LEVELS
+	int "Number of Page table levels"
+	default 2
+
+config ARC_COMPACT_IRQ_LEVELS
+	depends on ISA_ARCOMPACT
+	bool "Setup Timer IRQ as high Priority"
+	# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
+	depends on !SMP
+
+config ARC_FPU_SAVE_RESTORE
+	bool "Enable FPU state persistence across context switch"
+	help
+	  ARCompact FPU has internal registers to assist with Double precision
+	  Floating Point operations. There are control and stauts registers
+	  for floating point exceptions and rounding modes. These are
+	  preserved across task context switch when enabled.
+
+config ARC_CANT_LLSC
+	def_bool n
+
+config ARC_HAS_LLSC
+	bool "Insn: LLOCK/SCOND (efficient atomic ops)"
+	default y
+	depends on !ARC_CANT_LLSC
+
+config ARC_HAS_SWAPE
+	bool "Insn: SWAPE (endian-swap)"
+	default y
+
+if ISA_ARCV2
+
+config ARC_USE_UNALIGNED_MEM_ACCESS
+	bool "Enable unaligned access in HW"
+	default y
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
+	help
+	  The ARC HS architecture supports unaligned memory access
+	  which is disabled by default. Enable unaligned access in
+	  hardware and use software to use it
+
+config ARC_HAS_LL64
+	bool "Insn: 64bit LDD/STD"
+	help
+	  Enable gcc to generate 64-bit load/store instructions
+	  ISA mandates even/odd registers to allow encoding of two
+	  dest operands with 2 possible source operands.
+	default y
+
+config ARC_HAS_DIV_REM
+	bool "Insn: div, divu, rem, remu"
+	default y
+
+config ARC_HAS_ACCL_REGS
+	bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6 and/or DSP)"
+	default y
+	help
+	  Depending on the configuration, CPU can contain accumulator reg-pair
+	  (also referred to as r58:r59). These can also be used by gcc as GPR so
+	  kernel needs to save/restore per process
+
+config ARC_DSP_HANDLED
+	def_bool n
+
+config ARC_DSP_SAVE_RESTORE_REGS
+	def_bool n
+
+choice
+	prompt "DSP support"
+	default ARC_DSP_NONE
+	help
+	  Depending on the configuration, CPU can contain DSP registers
+	  (ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_CTRL, DSP_FFT_CTRL).
+	  Below are options describing how to handle these registers in
+	  interrupt entry / exit and in context switch.
+
+config ARC_DSP_NONE
+	bool "No DSP extension presence in HW"
+	help
+	  No DSP extension presence in HW
+
+config ARC_DSP_KERNEL
+	bool "DSP extension in HW, no support for userspace"
+	select ARC_HAS_ACCL_REGS
+	select ARC_DSP_HANDLED
+	help
+	  DSP extension presence in HW, no support for DSP-enabled userspace
+	  applications. We don't save / restore DSP registers and only do
+	  some minimal preparations so userspace won't be able to break kernel
+
+config ARC_DSP_USERSPACE
+	bool "Support DSP for userspace apps"
+	select ARC_HAS_ACCL_REGS
+	select ARC_DSP_HANDLED
+	select ARC_DSP_SAVE_RESTORE_REGS
+	help
+	  DSP extension presence in HW, support save / restore DSP registers to
+	  run DSP-enabled userspace applications
+
+config ARC_DSP_AGU_USERSPACE
+	bool "Support DSP with AGU for userspace apps"
+	select ARC_HAS_ACCL_REGS
+	select ARC_DSP_HANDLED
+	select ARC_DSP_SAVE_RESTORE_REGS
+	help
+	  DSP and AGU extensions presence in HW, support save / restore DSP
+	  and AGU registers to run DSP-enabled userspace applications
+endchoice
+
+config ARC_IRQ_NO_AUTOSAVE
+	bool "Disable hardware autosave regfile on interrupts"
+	default n
+	help
+	  On HS cores, taken interrupt auto saves the regfile on stack.
+	  This is programmable and can be optionally disabled in which case
+	  software INTERRUPT_PROLOGUE/EPILGUE do the needed work
+
+config ARC_LPB_DISABLE
+	bool "Disable loop buffer (LPB)"
+	help
+	  On HS cores, loop buffer (LPB) is programmable in runtime and can
+	  be optionally disabled.
+
+endif # ISA_ARCV2
+
+endmenu   # "ARC CPU Configuration"
+
+config LINUX_LINK_BASE
+	hex "Kernel link address"
+	default "0x80000000"
+	help
+	  ARC700 divides the 32 bit phy address space into two equal halves
+	  -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
+	  -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
+	  Typically Linux kernel is linked at the start of untransalted addr,
+	  hence the default value of 0x8zs.
+	  However some customers have peripherals mapped at this addr, so
+	  Linux needs to be scooted a bit.
+	  If you don't know what the above means, leave this setting alone.
+	  This needs to match memory start address specified in Device Tree
+
+config LINUX_RAM_BASE
+	hex "RAM base address"
+	default LINUX_LINK_BASE
+	help
+	  By default Linux is linked at base of RAM. However in some special
+	  cases (such as HSDK), Linux can't be linked at start of DDR, hence
+	  this option.
+
+config HIGHMEM
+	bool "High Memory Support"
+	select HAVE_ARCH_PFN_VALID
+	select KMAP_LOCAL
+	help
+	  With ARC 2G:2G address split, only upper 2G is directly addressable by
+	  kernel. Enable this to potentially allow access to rest of 2G and PAE
+	  in future
+
+config ARC_HAS_PAE40
+	bool "Support for the 40-bit Physical Address Extension"
+	depends on ISA_ARCV2
+	select HIGHMEM
+	select PHYS_ADDR_T_64BIT
+	help
+	  Enable access to physical memory beyond 4G, only supported on
+	  ARC cores with 40 bit Physical Addressing support
+
+config ARC_KVADDR_SIZE
+	int "Kernel Virtual Address Space size (MB)"
+	range 0 512
+	default "256"
+	help
+	  The kernel address space is carved out of 256MB of translated address
+	  space for catering to vmalloc, modules, pkmap, fixmap. This however may
+	  not suffice vmalloc requirements of a 4K CPU EZChip system. So allow
+	  this to be stretched to 512 MB (by extending into the reserved
+	  kernel-user gutter)
+
+config ARC_CURR_IN_REG
+	bool "Dedicate Register r25 for current_task pointer"
+	default y
+	help
+	  This reserved Register R25 to point to Current Task in
+	  kernel mode. This saves memory access for each such access
+
+
+config ARC_EMUL_UNALIGNED
+	bool "Emulate unaligned memory access (userspace only)"
+	select SYSCTL_ARCH_UNALIGN_NO_WARN
+	select SYSCTL_ARCH_UNALIGN_ALLOW
+	depends on ISA_ARCOMPACT
+	help
+	  This enables misaligned 16 & 32 bit memory access from user space.
+	  Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
+	  potential bugs in code
+
+config HZ
+	int "Timer Frequency"
+	default 100
+
+config ARC_METAWARE_HLINK
+	bool "Support for Metaware debugger assisted Host access"
+	help
+	  This options allows a Linux userland apps to directly access
+	  host file system (open/creat/read/write etc) with help from
+	  Metaware Debugger. This can come in handy for Linux-host communication
+	  when there is no real usable peripheral such as EMAC.
+
+menuconfig ARC_DBG
+	bool "ARC debugging"
+	default y
+
+if ARC_DBG
+
+config ARC_DW2_UNWIND
+	bool "Enable DWARF specific kernel stack unwind"
+	default y
+	select KALLSYMS
+	help
+	  Compiles the kernel with DWARF unwind information and can be used
+	  to get stack backtraces.
+
+	  If you say Y here the resulting kernel image will be slightly larger
+	  but not slower, and it will give very useful debugging information.
+	  If you don't debug the kernel, you can say N, but we may not be able
+	  to solve problems without frame unwind information
+
+config ARC_DBG_JUMP_LABEL
+	bool "Paranoid checks in Static Keys (jump labels) code"
+	depends on JUMP_LABEL
+	default y if STATIC_KEYS_SELFTEST
+	help
+	  Enable paranoid checks and self-test of both ARC-specific and generic
+	  part of static keys (jump labels) related code.
+endif
+
+config ARC_BUILTIN_DTB_NAME
+	string "Built in DTB"
+	help
+	  Set the name of the DTB to embed in the vmlinux binary
+	  Leaving it blank selects the minimal "skeleton" dtb
+
+endmenu	 # "ARC Architecture Configuration"
+
+config ARCH_FORCE_MAX_ORDER
+	int "Maximum zone order"
+	default "12" if ARC_HUGEPAGE_16M
+	default "11"
+
+source "kernel/power/Kconfig"
diff --git a/arch/arc/Kconfig.debug b/arch/arc/Kconfig.debug
new file mode 100644
index 000000000..45add86de
--- /dev/null
+++ b/arch/arc/Kconfig.debug
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config 16KSTACKS
+	bool "Use 16Kb for kernel stacks instead of 8Kb"
+	help
+	  If you say Y here the kernel will use a  16Kb stacksize for the
+	  kernel stack attached to each process/thread. The default is 8K.
+	  This increases the resident kernel footprint and will cause less
+	  threads to run on the system and also increase the pressure
+	  on the VM subsystem for higher order allocations.
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
new file mode 100644
index 000000000..329400a1c
--- /dev/null
+++ b/arch/arc/Makefile
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+
+KBUILD_DEFCONFIG := haps_hs_smp_defconfig
+
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+endif
+
+cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
+
+tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT)	:= -mcpu=arc700
+tune-mcpu-def-$(CONFIG_ISA_ARCV2)	:= -mcpu=hs38
+
+ifeq ($(CONFIG_ARC_TUNE_MCPU),)
+cflags-y				+= $(tune-mcpu-def-y)
+else
+tune-mcpu				:= $(CONFIG_ARC_TUNE_MCPU)
+ifneq ($(call cc-option,$(tune-mcpu)),)
+cflags-y				+= $(tune-mcpu)
+else
+# The flag provided by 'CONFIG_ARC_TUNE_MCPU' option isn't known by this compiler
+# (probably the compiler is too old). Use ISA default mcpu flag instead as a safe option.
+$(warning ** WARNING ** CONFIG_ARC_TUNE_MCPU flag '$(tune-mcpu)' is unknown, fallback to '$(tune-mcpu-def-y)')
+cflags-y				+= $(tune-mcpu-def-y)
+endif
+endif
+
+
+ifdef CONFIG_ARC_CURR_IN_REG
+# For a global register definition, make sure it gets passed to every file
+# We had a customer reported bug where some code built in kernel was NOT using
+# any kernel headers, and missing the r25 global register
+# Can't do unconditionally because of recursive include issues
+# due to <linux/thread_info.h>
+LINUXINCLUDE	+=  -include $(srctree)/arch/arc/include/asm/current.h
+endif
+
+cflags-y				+= -fsection-anchors
+
+cflags-$(CONFIG_ARC_HAS_LLSC)		+= -mlock
+cflags-$(CONFIG_ARC_HAS_SWAPE)		+= -mswape
+
+ifdef CONFIG_ISA_ARCV2
+
+ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
+cflags-y				+= -munaligned-access
+else
+cflags-y				+= -mno-unaligned-access
+endif
+
+ifndef CONFIG_ARC_HAS_LL64
+cflags-y				+= -mno-ll64
+endif
+
+ifndef CONFIG_ARC_HAS_DIV_REM
+cflags-y				+= -mno-div-rem
+endif
+
+endif
+
+cfi := $(call as-instr,.cfi_startproc\n.cfi_endproc,-DARC_DW2_UNWIND_AS_CFI)
+cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables $(cfi)
+
+# small data is default for elf32 tool-chain. If not usable, disable it
+# This also allows repurposing GP as scratch reg to gcc reg allocator
+disable_small_data := y
+cflags-$(disable_small_data)		+= -mno-sdata -fcall-used-gp
+
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mbig-endian
+ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
+
+LIBGCC	= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
+
+# Modules with short calls might break for calls into builtin-kernel
+KBUILD_CFLAGS_MODULE	+= -mlong-calls -mno-millicode
+
+# Finally dump eveything into kernel build system
+KBUILD_CFLAGS	+= $(cflags-y)
+KBUILD_AFLAGS	+= $(KBUILD_CFLAGS)
+KBUILD_LDFLAGS	+= $(ldflags-y)
+
+# w/o this dtb won't embed into kernel binary
+core-y		+= arch/arc/boot/dts/
+
+core-y				+= arch/arc/plat-sim/
+core-$(CONFIG_ARC_PLAT_TB10X)	+= arch/arc/plat-tb10x/
+core-$(CONFIG_ARC_PLAT_AXS10X)	+= arch/arc/plat-axs10x/
+core-$(CONFIG_ARC_SOC_HSDK)	+= arch/arc/plat-hsdk/
+
+libs-y		+= arch/arc/lib/ $(LIBGCC)
+
+boot		:= arch/arc/boot
+
+boot_targets := uImage.bin uImage.gz uImage.lzma
+
+PHONY += $(boot_targets)
+$(boot_targets): vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+uimage-default-y			:= uImage.bin
+uimage-default-$(CONFIG_KERNEL_GZIP)	:= uImage.gz
+uimage-default-$(CONFIG_KERNEL_LZMA)	:= uImage.lzma
+
+PHONY += uImage
+uImage: $(uimage-default-y)
+	@ln -sf $< $(boot)/uImage
+	@$(kecho) '  Image $(boot)/uImage is ready'
+
+CLEAN_FILES += $(boot)/uImage
diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore
new file mode 100644
index 000000000..675db1494
--- /dev/null
+++ b/arch/arc/boot/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+uImage
diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile
new file mode 100644
index 000000000..5648748c2
--- /dev/null
+++ b/arch/arc/boot/Makefile
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# uImage build relies on mkimage being availble on your host for ARC target
+# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
+# and make sure it's reacable from your PATH
+
+OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+LINUX_START_TEXT = $$($(READELF) -h vmlinux | \
+			grep "Entry point address" | grep -o 0x.*)
+
+UIMAGE_LOADADDR    = $(CONFIG_LINUX_LINK_BASE)
+UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
+
+targets += vmlinux.bin
+targets += vmlinux.bin.gz
+targets += vmlinux.bin.lzma
+targets += uImage.bin
+targets += uImage.gz
+targets += uImage.lzma
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,uimage,none)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,uimage,gzip)
+
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
+	$(call if_changed,uimage,lzma)
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
new file mode 100644
index 000000000..4237aa5de
--- /dev/null
+++ b/arch/arc/boot/dts/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+# Built-in dtb
+builtindtb-y		:= nsim_700
+
+ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),)
+	builtindtb-y	:= $(CONFIG_ARC_BUILTIN_DTB_NAME)
+endif
+
+obj-y   += $(builtindtb-y).dtb.o
+dtb-y := $(builtindtb-y).dtb
+
+# for CONFIG_OF_ALL_DTBS test
+dtstree	:= $(srctree)/$(src)
+dtb-	:= $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+
+# board-specific dtc flags
+DTC_FLAGS_hsdk += --pad 20
diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi
new file mode 100644
index 000000000..41026a3bf
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb100.dtsi
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB100 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+
+/ {
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@ff10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				abilis,function = "mis0";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				abilis,function = "mis1";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				abilis,function = "gpioa";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				abilis,function = "mip1";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				abilis,function = "mis2";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				abilis,function = "mis3";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				abilis,function = "gpioc";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				abilis,function = "mip3";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				abilis,function = "mis4";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				abilis,function = "mis5";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				abilis,function = "gpioe";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				abilis,function = "mip5";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				abilis,function = "mis6";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				abilis,function = "mis7";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				abilis,function = "gpiog";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				abilis,function = "mip7";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				abilis,function = "gpioj";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				abilis,function = "gpiok";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				abilis,function = "ciplus";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				abilis,function = "mcard";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				abilis,function = "mop";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				abilis,function = "mos0";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				abilis,function = "mos1";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				abilis,function = "mos2";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				abilis,function = "mos3";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				abilis,function = "uart0";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				abilis,function = "uart1";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				abilis,function = "gpiol";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				abilis,function = "gpiom";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				abilis,function = "spi3";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				abilis,function = "spi1";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				abilis,function = "gpion";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				abilis,function = "gpiob";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				abilis,function = "gpiod";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				abilis,function = "gpiof";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				abilis,function = "gpioh";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				abilis,function = "gpioi";
+			};
+		};
+
+		gpioa: gpio@ff140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
+		};
+		gpiob: gpio@ff141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
+		};
+		gpioc: gpio@ff142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
+		};
+		gpiod: gpio@ff143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
+		};
+		gpioe: gpio@ff144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
+		};
+		gpiof: gpio@ff145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
+		};
+		gpiog: gpio@ff146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
+		};
+		gpioh: gpio@ff147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
+		};
+		gpioi: gpio@ff148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
+		};
+		gpioj: gpio@ff149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
+		};
+		gpiok: gpio@ff14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14a000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
+		};
+		gpiol: gpio@ff14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14b000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
+		};
+		gpiom: gpio@ff14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14c000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
+		};
+		gpion: gpio@ff14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14d000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
new file mode 100644
index 000000000..6d346de5e
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB100 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb100.dtsi"
+
+/ {
+	model = "abilis,tb100";
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@ff100000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@fe100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@ff120000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c1: i2c@ff121000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c2: i2c@ff122000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c3: i2c@ff123000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c4: i2c@ff124000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2 0>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3 0>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4 0>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5 0>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6 0>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7 0>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8 0>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9 0>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10 0>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11 0>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi
new file mode 100644
index 000000000..041ab1ba0
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb101.dtsi
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB101 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+
+/ {
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@ff10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				abilis,function = "mis0";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				abilis,function = "mis1";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				abilis,function = "gpioa";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				abilis,function = "mip1";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				abilis,function = "mis2";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				abilis,function = "mis3";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				abilis,function = "gpioc";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				abilis,function = "mip3";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				abilis,function = "mis4";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				abilis,function = "mis5";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				abilis,function = "gpioe";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				abilis,function = "mip5";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				abilis,function = "mis6";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				abilis,function = "mis7";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				abilis,function = "gpiog";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				abilis,function = "mip7";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				abilis,function = "gpioj";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				abilis,function = "gpiok";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				abilis,function = "ciplus";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				abilis,function = "mcard";
+			};
+			pctl_stc0: pctl-stc0 {         /* Smart card I/F 0 */
+				abilis,function = "stc0";
+			};
+			pctl_stc1: pctl-stc1 {         /* Smart card I/F 1 */
+				abilis,function = "stc1";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				abilis,function = "mop";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				abilis,function = "mos0";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				abilis,function = "mos1";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				abilis,function = "mos2";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				abilis,function = "mos3";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				abilis,function = "uart0";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				abilis,function = "uart1";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				abilis,function = "gpiol";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				abilis,function = "gpiom";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				abilis,function = "spi3";
+			};
+			pctl_jtag: pctl-jtag {
+				abilis,function = "jtag";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				abilis,function = "spi1";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				abilis,function = "gpion";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				abilis,function = "gpiob";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				abilis,function = "gpiod";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				abilis,function = "gpiof";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				abilis,function = "gpioh";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				abilis,function = "gpioi";
+			};
+		};
+
+		gpioa: gpio@ff140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
+		};
+		gpiob: gpio@ff141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
+		};
+		gpioc: gpio@ff142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
+		};
+		gpiod: gpio@ff143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
+		};
+		gpioe: gpio@ff144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
+		};
+		gpiof: gpio@ff145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
+		};
+		gpiog: gpio@ff146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
+		};
+		gpioh: gpio@ff147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
+		};
+		gpioi: gpio@ff148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
+		};
+		gpioj: gpio@ff149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
+		};
+		gpiok: gpio@ff14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14a000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
+		};
+		gpiol: gpio@ff14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14b000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
+		};
+		gpiom: gpio@ff14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14c000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
+		};
+		gpion: gpio@ff14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14d000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
new file mode 100644
index 000000000..d11b790f8
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB101 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb101.dtsi"
+
+/ {
+	model = "abilis,tb101";
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@ff100000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@fe100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@ff120000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c1: i2c@ff121000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c2: i2c@ff122000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c3: i2c@ff123000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c4: i2c@ff124000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2 0>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3 0>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4 0>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5 0>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6 0>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7 0>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8 0>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9 0>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10 0>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11 0>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
new file mode 100644
index 000000000..aa62619f2
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB10X SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+
+/ {
+	compatible		= "abilis,arc-tb10x";
+	#address-cells		= <1>;
+	#size-cells		= <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,arc770d";
+			reg = <0>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <3>;
+		interrupt-parent = <&intc>;
+		clocks = <&cpu_clk>;
+	};
+
+	/* TIMER1 for free running clocksource */
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&cpu_clk>;
+	};
+
+	soc100 {
+		#address-cells	= <1>;
+		#size-cells	= <1>;
+		device_type	= "soc";
+		ranges		= <0xfe000000 0xfe000000 0x02000000
+				0x000f0000 0x000f0000 0x00010000>;
+		compatible	= "abilis,tb10x", "simple-bus";
+
+		pll0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "pll0";
+		};
+		cpu_clk: clkdiv_cpu {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "cpu_clk";
+		};
+		ahb_clk: clkdiv_ahb {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "ahb_clk";
+		};
+
+		iomux: iomux@ff10601c {
+			compatible = "abilis,tb10x-iomux";
+			#gpio-range-cells = <3>;
+			reg = <0xff10601c 0x4>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+		tb10x_ictl: pic@fe002000 {
+			compatible = "abilis,tb10x-ictl";
+			reg = <0xfe002000 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+					20 21 22 23 24 25 26 27 28 29 30 31>;
+		};
+
+		uart@ff100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xff100000 0x100>;
+			clock-frequency = <166666666>;
+			interrupts = <25 8>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupt-parent = <&tb10x_ictl>;
+		};
+		ethernet@fe100000 {
+			compatible = "snps,dwmac-3.70a","snps,dwmac";
+			reg = <0xfe100000 0x1058>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <6 8>;
+			interrupt-names = "macirq";
+			clocks = <&ahb_clk>;
+			clock-names = "stmmaceth";
+		};
+		dma@fe000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xfe000000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <14 8>;
+			dma-channels = <6>;
+			dma-requests = <0>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			chan_allocation_order = <0>;
+			chan_priority = <1>;
+			block_size = <0x7ff>;
+			data-width = <4>;
+			clocks = <&ahb_clk>;
+			clock-names = "hclk";
+			multi-block = <1 1 1 1 1 1>;
+		};
+
+		i2c0: i2c@ff120000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff120000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c1: i2c@ff121000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff121000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c2: i2c@ff122000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff122000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c3: i2c@ff123000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff123000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c4: i2c@ff124000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff124000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+
+		spi0: spi@fe010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "abilis,tb100-spi";
+			num-cs = <1>;
+			reg = <0xfe010000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <26 8>;
+			clocks = <&ahb_clk>;
+		};
+		spi1: spi@fe011000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "abilis,tb100-spi";
+			num-cs = <2>;
+			reg = <0xfe011000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <10 8>;
+			clocks = <&ahb_clk>;
+		};
+
+		tb10x_tsm: tb10x-tsm@ff316000 {
+			compatible = "abilis,tb100-tsm";
+			reg = <0xff316000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <17 8>;
+			output-clkdiv = <4>;
+			global-packet-delay = <0x21>;
+			port-packet-delay = <0>;
+		};
+		tb10x_stream_proc: tb10x-stream-proc {
+			compatible = "abilis,tb100-streamproc";
+			reg =   <0xfff00000 0x200>,
+				<0x000f0000 0x10000>,
+				<0xfff00200 0x105>,
+				<0xff10600c 0x1>,
+				<0xfe001018 0x1>;
+			reg-names =     "mbox",
+					"sp_iccm",
+					"mbox_irq",
+					"cpuctrl",
+					"a6it_int_force";
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <20 2>, <19 2>;
+			interrupt-names = "cmd_irq", "event_irq";
+		};
+		tb10x_mdsc0: tb10x-mdscr@ff300000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xff300000 0x7000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_mscr0: tb10x-mdscr@ff307000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xff307000 0x7000>;
+		};
+		tb10x_scr0: tb10x-mdscr@ff30e000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xff30e000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_scr1: tb10x-mdscr@ff312000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xff312000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_wfb: tb10x-wfb@ff319000 {
+			compatible = "abilis,tb100-wfb";
+			reg = <0xff319000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <16 8>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
new file mode 100644
index 000000000..2a151607b
--- /dev/null
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC001 770D/EM6/AS221 CPU card
+ * Note that this file only supports the 770D CPU
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <750000000>;
+		};
+
+		input_clk: input-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <33333333>;
+		};
+
+		core_intc: arc700-intc@cpu {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		/*
+		 * this GPIO block ORs all interrupts on CPU card (creg,..)
+		 * to uplink only 1 IRQ to ARC core intc
+		 */
+		dw-apb-gpio@2000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = < 0x2000 0x80 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ictl_intc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <30>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&core_intc>;
+				interrupts = <15>;
+			};
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33333000>;
+			interrupt-parent = <&ictl_intc>;
+			interrupts = <19 4>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
+	};
+
+	/*
+	 * This INTC is actually connected to DW APB GPIO
+	 * which acts as a wire between MB INTC and CPU INTC.
+	 * GPIO INTC is configured in platform init code
+	 * and here we mimic direct connection from MB INTC to
+	 * CPU INTC, thus we set "interrupts = <7>" instead of
+	 * "interrupts = <12>"
+	 *
+	 * This intc actually resides on MB, but we move it here to
+	 * avoid duplicating the MB dtsi file given that IRQ from
+	 * this intc to cpu intc are different for axs101 and axs103
+	 */
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		interrupts = < 7 >;
+	};
+
+	memory {
+		device_type = "memory";
+		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x1b000000>;	/* (512 - 32) MiB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/*
+		 * We just move frame buffer area to the very end of
+		 * available DDR. And even though in case of ARC770 there's
+		 * no strict requirement for a frame-buffer to be in any
+		 * particular location it allows us to use the same
+		 * base board's DT node for ARC PGU as for ARc HS38.
+		 */
+		frame_buffer: frame_buffer@9e000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9e000000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
new file mode 100644
index 000000000..3434c8131
--- /dev/null
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC003 CPU card: HS38x UP configuration
+ */
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
+
+		input_clk: input-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <33333333>;
+		};
+
+		core_clk: core-clk@80 {
+			compatible = "snps,axs10x-arc-pll-clock";
+			reg = <0x80 0x10>, <0x100 0x10>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 90MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <90000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		/*
+		 * this GPIO block ORs all interrupts on CPU card (creg,..)
+		 * to uplink only 1 IRQ to ARC core intc
+		 */
+		dw-apb-gpio@2000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = < 0x2000 0x80 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ictl_intc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <30>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&core_intc>;
+				interrupts = <25>;
+			};
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33333000>;
+			interrupt-parent = <&ictl_intc>;
+			interrupts = <2 4>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupt-parent = <&core_intc>;
+			interrupts = <20>;
+		};
+	};
+
+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@18000 {
+			dma-coherent;
+		};
+
+		usb@40000 {
+			dma-coherent;
+		};
+
+		usb@60000 {
+			dma-coherent;
+		};
+
+		mmc@15000 {
+			dma-coherent;
+		};
+	};
+
+	/*
+	 * The DW APB ICTL intc on MB is connected to CPU intc via a
+	 * DT "invisible" DW APB GPIO block, configured to simply pass thru
+	 * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
+	 *
+	 * So here we mimic a direct connection betwen them, ignoring the
+	 * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
+	 * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
+	 *
+	 * This intc actually resides on MB, but we move it here to
+	 * avoid duplicating the MB dtsi file given that IRQ from
+	 * this intc to cpu intc are different for axs101 and axs103
+	 */
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		interrupts = < 24 >;
+	};
+
+	memory {
+		device_type = "memory";
+		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
+		       0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/*
+		 * Move frame buffer out of IOC aperture (0x8z-0xaz).
+		 */
+		frame_buffer: frame_buffer@be000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xbe000000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
new file mode 100644
index 000000000..67556f4b7
--- /dev/null
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc
+ */
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
+
+		input_clk: input-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <33333333>;
+		};
+
+		core_clk: core-clk@80 {
+			compatible = "snps,axs10x-arc-pll-clock";
+			reg = <0x80 0x10>, <0x100 0x10>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 100MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <100000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			#interrupt-cells = <1>;
+		};
+
+		/*
+		 * this GPIO block ORs all interrupts on CPU card (creg,..)
+		 * to uplink only 1 IRQ to ARC core intc
+		 */
+		dw-apb-gpio@2000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = < 0x2000 0x80 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ictl_intc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <30>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&idu_intc>;
+				interrupts = <1>;
+			};
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33333000>;
+			interrupt-parent = <&ictl_intc>;
+			interrupts = <2 4>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupt-parent = <&core_intc>;
+			interrupts = <20>;
+		};
+	};
+
+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@18000 {
+			dma-coherent;
+		};
+
+		usb@40000 {
+			dma-coherent;
+		};
+
+		usb@60000 {
+			dma-coherent;
+		};
+
+		mmc@15000 {
+			dma-coherent;
+		};
+	};
+
+	/*
+	 * This INTC is actually connected to DW APB GPIO
+	 * which acts as a wire between MB INTC and CPU INTC.
+	 * GPIO INTC is configured in platform init code
+	 * and here we mimic direct connection from MB INTC to
+	 * CPU INTC, thus we set "interrupts = <0 1>" instead of
+	 * "interrupts = <12>"
+	 *
+	 * This intc actually resides on MB, but we move it here to
+	 * avoid duplicating the MB dtsi file given that IRQ from
+	 * this intc to cpu intc are different for axs101 and axs103
+	 */
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&idu_intc>;
+		interrupts = <0>;
+	};
+
+	memory {
+		device_type = "memory";
+		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
+		       0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/*
+		 * Move frame buffer out of IOC aperture (0x8z-0xaz).
+		 */
+		frame_buffer: frame_buffer@be000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xbe000000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/axs101.dts b/arch/arc/boot/dts/axs101.dts
new file mode 100644
index 000000000..c4cfc5f4f
--- /dev/null
+++ b/arch/arc/boot/dts/axs101.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * ARC AXS101 S/W development platform
+ */
+/dts-v1/;
+
+/include/ "axc001.dtsi"
+/include/ "axs10x_mb.dtsi"
+
+/ {
+	model = "snps,axs101";
+	compatible = "snps,axs101", "snps,arc-sdp";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 print-fatal-signals=1";
+	};
+};
diff --git a/arch/arc/boot/dts/axs103.dts b/arch/arc/boot/dts/axs103.dts
new file mode 100644
index 000000000..16ccb7ba7
--- /dev/null
+++ b/arch/arc/boot/dts/axs103.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device Tree for AXS103 SDP with AXS10X Main Board and
+ * AXC003 FPGA Card (with UP bitfile)
+ */
+/dts-v1/;
+
+/include/ "axc003.dtsi"
+/include/ "axs10x_mb.dtsi"
+
+/ {
+	model = "snps,axs103";
+	compatible = "snps,axs103", "snps,arc-sdp";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 debug print-fatal-signals=1";
+	};
+};
diff --git a/arch/arc/boot/dts/axs103_idu.dts b/arch/arc/boot/dts/axs103_idu.dts
new file mode 100644
index 000000000..a934b92a8
--- /dev/null
+++ b/arch/arc/boot/dts/axs103_idu.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device Tree for AXS103 SDP with AXS10X Main Board and
+ * AXC003 FPGA Card (with SMP bitfile)
+ */
+/dts-v1/;
+
+/include/ "axc003_idu.dtsi"
+/include/ "axs10x_mb.dtsi"
+
+/ {
+	model = "snps,axs103-smp";
+	compatible = "snps,axs103", "snps,arc-sdp";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0";
+	};
+};
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
new file mode 100644
index 000000000..b64435385
--- /dev/null
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for peripherals on the AXS10x mainboard
+ *
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/ {
+	aliases {
+		ethernet = &gmac;
+	};
+
+	axs10x_mb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x0 0xe0000000 0x10000000>;
+		interrupt-parent = <&mb_intc>;
+
+		creg_rst: reset-controller@11220 {
+			compatible = "snps,axs10x-reset";
+			#reset-cells = <1>;
+			reg = <0x11220 0x4>;
+		};
+
+		i2sclk: i2sclk@100a0 {
+			compatible = "snps,axs10x-i2s-pll-clock";
+			reg = <0x100a0 0x10>;
+			clocks = <&i2spll_clk>;
+			#clock-cells = <0>;
+		};
+
+		clocks {
+			i2spll_clk: i2spll_clk {
+				compatible = "fixed-clock";
+				clock-frequency = <27000000>;
+				#clock-cells = <0>;
+			};
+
+			i2cclk: i2cclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			apbclk: apbclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			mmcclk: mmcclk {
+				compatible = "fixed-clock";
+				/*
+				 * DW sdio controller has external ciu clock divider
+				 * controlled via register in SDIO IP. It divides
+				 * sdio_ref_clk (which comes from CGU) by 16 for
+				 * default. So default mmcclk clock (which comes
+				 * to sdk_in) is 25000000 Hz.
+				 */
+				clock-frequency = <25000000>;
+				#clock-cells = <0>;
+			};
+		};
+
+		pguclk: pguclk@10080 {
+			compatible = "snps,axs10x-pgu-pll-clock";
+			reg = <0x10080 0x10>, <0x110 0x10>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+		};
+
+		gmac: ethernet@18000 {
+			#interrupt-cells = <1>;
+			compatible = "snps,dwmac";
+			reg = < 0x18000 0x2000 >;
+			interrupts = < 4 >;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			snps,pbl = < 32 >;
+			snps,multicast-filter-bins = <256>;
+			clocks = <&apbclk>;
+			clock-names = "stmmaceth";
+			max-speed = <100>;
+			resets = <&creg_rst 5>;
+			reset-names = "stmmaceth";
+			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+		};
+
+		usb@40000 {
+			compatible = "generic-ehci";
+			reg = < 0x40000 0x100 >;
+			interrupts = < 8 >;
+		};
+
+		usb@60000 {
+			compatible = "generic-ohci";
+			reg = < 0x60000 0x100 >;
+			interrupts = < 8 >;
+		};
+
+		/*
+		 * According to DW Mobile Storage databook it is required
+		 * to use  "Hold Register" if card is enumerated in SDR12 or
+		 * SDR25 modes.
+		 *
+		 * Utilization of "Hold Register" is already implemented via
+		 * dw_mci_pltfm_prepare_command() which in its turn gets
+		 * used through dw_mci_drv_data->prepare_command call-back.
+		 * This call-back is used in Altera Socfpga platform and so
+		 * we may reuse it saying that we're compatible with their
+		 * "altr,socfpga-dw-mshc".
+		 *
+		 * Most probably "Hold Register" utilization is platform-
+		 * independent requirement which means that single unified
+		 * "snps,dw-mshc" should be enough for all users of DW MMC once
+		 * dw_mci_pltfm_prepare_command() is used in generic platform
+		 * code.
+		 */
+		mmc@15000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = < 0x15000 0x400 >;
+			fifo-depth = < 16 >;
+			card-detect-delay = < 200 >;
+			clocks = <&apbclk>, <&mmcclk>;
+			clock-names = "biu", "ciu";
+			interrupts = < 7 >;
+			bus-width = < 4 >;
+		};
+
+		uart@20000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20000 0x100>;
+			clock-frequency = <33333333>;
+			interrupts = <17>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart@21000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x21000 0x100>;
+			clock-frequency = <33333333>;
+			interrupts = <18>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		/* UART muxed with USB data port (ttyS3) */
+		uart@22000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x22000 0x100>;
+			clock-frequency = <33333333>;
+			interrupts = <19>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		i2c@1d000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x1d000 0x100>;
+			clock-frequency = <400000>;
+			clocks = <&i2cclk>;
+			interrupts = <14>;
+		};
+
+		i2s: i2s@1e000 {
+			compatible = "snps,designware-i2s";
+			reg = <0x1e000 0x100>;
+			clocks = <&i2sclk 0>;
+			clock-names = "i2sclk";
+			interrupts = <15>;
+			#sound-dai-cells = <0>;
+		};
+
+		i2c@1f000 {
+			compatible = "snps,designware-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1f000 0x100>;
+			clock-frequency = <400000>;
+			clocks = <&i2cclk>;
+			interrupts = <16>;
+
+			adv7511:adv7511@39{
+				compatible="adi,adv7511";
+				reg = <0x39>;
+				interrupts = <23>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "rgb";
+				adi,input-clock = "1x";
+				adi,clock-delay = <0x03>;
+				#sound-dai-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* RGB/YUV input */
+					port@0 {
+						reg = <0>;
+						adv7511_input:endpoint {
+						remote-endpoint = <&pgu_output>;
+						};
+					};
+
+					/* HDMI output */
+					port@1 {
+						reg = <1>;
+						adv7511_output: endpoint {
+							remote-endpoint = <&hdmi_connector_in>;
+						};
+					};
+				};
+			};
+
+			eeprom@54{
+				compatible = "atmel,24c01";
+				reg = <0x54>;
+				pagesize = <0x8>;
+			};
+
+			eeprom@57{
+				compatible = "atmel,24c04";
+				reg = <0x57>;
+				pagesize = <0x8>;
+			};
+		};
+
+		hdmi0: connector {
+			compatible = "hdmi-connector";
+			type = "a";
+			port {
+				hdmi_connector_in: endpoint {
+					remote-endpoint = <&adv7511_output>;
+				};
+			};
+		};
+
+		gpio0:gpio@13000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x13000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio0_banka: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+			};
+
+			gpio0_bankb: gpio-controller@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <8>;
+				reg = <1>;
+			};
+
+			gpio0_bankc: gpio-controller@2 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <8>;
+				reg = <2>;
+			};
+		};
+
+		gpio1:gpio@14000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x14000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio1_banka: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <30>;
+				reg = <0>;
+			};
+
+			gpio1_bankb: gpio-controller@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <10>;
+				reg = <1>;
+			};
+
+			gpio1_bankc: gpio-controller@2 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <8>;
+				reg = <2>;
+			};
+		};
+
+		pgu@17000 {
+			compatible = "snps,arcpgu";
+			reg = <0x17000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+			memory-region = <&frame_buffer>;
+			port {
+				pgu_output: endpoint {
+					remote-endpoint = <&adv7511_input>;
+				};
+			};
+		};
+
+		sound_playback {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "AXS10x HDMI Audio";
+			simple-audio-card,format = "i2s";
+			simple-audio-card,cpu {
+				sound-dai = <&i2s>;
+			};
+			simple-audio-card,codec {
+				sound-dai = <&adv7511>;
+			};
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/haps_hs.dts b/arch/arc/boot/dts/haps_hs.dts
new file mode 100644
index 000000000..76ad527a0
--- /dev/null
+++ b/arch/arc/boot/dts/haps_hs.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	model = "snps,zebu_hs";
+	compatible = "snps,zebu_hs";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&core_intc>;
+
+	memory {
+		device_type = "memory";
+		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x40000000	/* 1 GB low mem */
+		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* only perip space at end of low mem accessible
+			  bus addr,  parent bus addr, size    */
+		ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns16550a";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+
+		virtio0: virtio@f0100000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0100000 0x2000>;
+			interrupts = <31>;
+		};
+
+		virtio1: virtio@f0102000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0102000 0x2000>;
+			interrupts = <32>;
+		};
+
+		virtio2: virtio@f0104000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0104000 0x2000>;
+			interrupts = <33>;
+		};
+
+		virtio3: virtio@f0106000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0106000 0x2000>;
+			interrupts = <34>;
+		};
+
+		virtio4: virtio@f0108000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0108000 0x2000>;
+			interrupts = <35>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/haps_hs_idu.dts b/arch/arc/boot/dts/haps_hs_idu.dts
new file mode 100644
index 000000000..738c76cd0
--- /dev/null
+++ b/arch/arc/boot/dts/haps_hs_idu.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	model = "snps,zebu_hs-smp";
+	compatible = "snps,zebu_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512 */
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;	/* 50 MHZ */
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns16550a";
+			reg = <0xf0000000 0x2000>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <0>;
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
new file mode 100644
index 000000000..6691f4255
--- /dev/null
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device Tree for ARC HS Development Kit
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/snps,hsdk-reset.h>
+
+/ {
+	model = "snps,hsdk";
+	compatible = "snps,hsdk";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
+	};
+
+	aliases {
+		ethernet = &gmac;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <0>;
+			clocks = <&core_clk>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <1>;
+			clocks = <&core_clk>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <2>;
+			clocks = <&core_clk>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <3>;
+			clocks = <&core_clk>;
+		};
+	};
+
+	input_clk: input-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <33333333>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "5v0-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	cpu_intc: cpu-interrupt-controller {
+		compatible = "snps,archs-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	idu_intc: idu-interrupt-controller {
+		compatible = "snps,archs-idu-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&cpu_intc>;
+	};
+
+	arcpct: pct {
+		compatible = "snps,archs-pct";
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <20>;
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer {
+		compatible = "snps,arc-timer";
+		interrupts = <16>;
+		interrupt-parent = <&cpu_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* 64-bit Global Free Running Counter */
+	gfrc {
+		compatible = "snps,archs-timer-gfrc";
+		clocks = <&core_clk>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&idu_intc>;
+
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
+
+		cgu_rst: reset-controller@8a0 {
+			compatible = "snps,hsdk-reset";
+			#reset-cells = <1>;
+			reg = <0x8a0 0x4>, <0xff0 0x4>;
+		};
+
+		core_clk: core-clk@0 {
+			compatible = "snps,hsdk-core-pll-clock";
+			reg = <0x00 0x10>, <0x14b8 0x4>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 1GHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <1000000000>;
+		};
+
+		serial: serial@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33330000>;
+			interrupts = <6>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		gmacclk: gmacclk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		mmcclk_ciu: mmcclk-ciu {
+			compatible = "fixed-clock";
+			/*
+			 * DW sdio controller has external ciu clock divider
+			 * controlled via register in SDIO IP. Due to its
+			 * unexpected default value (it should divide by 1
+			 * but it divides by 8) SDIO IP uses wrong clock and
+			 * works unstable (see STAR 9001204800)
+			 * We switched to the minimum possible value of the
+			 * divisor (div-by-2) in HSDK platform code.
+			 * So add temporary fix and change clock frequency
+			 * to 50000000 Hz until we fix dw sdio driver itself.
+			 */
+			clock-frequency = <50000000>;
+			#clock-cells = <0>;
+		};
+
+		mmcclk_biu: mmcclk-biu {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_core_clk: gpu-core-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_dma_clk: gpu-dma-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_cfg_clk: gpu-cfg-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			#clock-cells = <0>;
+		};
+
+		dmac_core_clk: dmac-core-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		dmac_cfg_clk: dmac-gpu-cfg-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			#clock-cells = <0>;
+		};
+
+		gmac: ethernet@8000 {
+			#interrupt-cells = <1>;
+			compatible = "snps,dwmac";
+			reg = <0x8000 0x2000>;
+			interrupts = <10>;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii-id";
+			snps,pbl = <32>;
+			snps,multicast-filter-bins = <256>;
+			clocks = <&gmacclk>;
+			clock-names = "stmmaceth";
+			phy-handle = <&phy0>;
+			resets = <&cgu_rst HSDK_ETH_RESET>;
+			reset-names = "stmmaceth";
+			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+			dma-coherent;
+
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+				phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
+					reg = <0>;
+				};
+			};
+		};
+
+		usb@60000 {
+			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
+			reg = <0x60000 0x100>;
+			interrupts = <15>;
+			resets = <&cgu_rst HSDK_USB_RESET>;
+			dma-coherent;
+		};
+
+		usb@40000 {
+			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
+			reg = <0x40000 0x100>;
+			interrupts = <15>;
+			resets = <&cgu_rst HSDK_USB_RESET>;
+			dma-coherent;
+		};
+
+		mmc@a000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xa000 0x400>;
+			num-slots = <1>;
+			fifo-depth = <16>;
+			card-detect-delay = <200>;
+			clocks = <&mmcclk_biu>, <&mmcclk_ciu>;
+			clock-names = "biu", "ciu";
+			interrupts = <12>;
+			bus-width = <4>;
+			dma-coherent;
+		};
+
+		spi0: spi@20000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x20000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <16>;
+			num-cs = <2>;
+			reg-io-width = <4>;
+			clocks = <&input_clk>;
+			cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
+				   <&creg_gpio 1 GPIO_ACTIVE_LOW>;
+
+			flash@0 {
+				compatible = "sst26wf016b", "jedec,spi-nor";
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				spi-max-frequency = <4000000>;
+			};
+
+			adc@1 {
+				compatible = "ti,adc108s102";
+				reg = <1>;
+				vref-supply = <&reg_5v0>;
+				spi-max-frequency = <1000000>;
+			};
+		};
+
+		creg_gpio: gpio@14b0 {
+			compatible = "snps,creg-gpio-hsdk";
+			reg = <0x14b0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <2>;
+		};
+
+		gpio: gpio@3000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio_port_a: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+			};
+		};
+
+		gpu_3d: gpu@90000 {
+			compatible = "vivante,gc";
+			reg = <0x90000 0x4000>;
+			clocks = <&gpu_dma_clk>,
+				 <&gpu_cfg_clk>,
+				 <&gpu_core_clk>,
+				 <&gpu_core_clk>;
+			clock-names = "bus", "reg", "core", "shader";
+			interrupts = <28>;
+		};
+
+		dmac: dmac@80000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x80000 0x400>;
+			interrupts = <27>;
+			clocks = <&dmac_core_clk>, <&dmac_cfg_clk>;
+			clock-names = "core-clk", "cfgr-clk";
+
+			dma-channels = <4>;
+			snps,dma-masters = <2>;
+			snps,data-width = <3>;
+			snps,block-size = <4096 4096 4096 4096>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <16>;
+		};
+	};
+
+	memory@80000000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;  /* 1 GB lowmem */
+		/*     0x1 0x00000000 0x0 0x40000000>;     1 GB highmem */
+	};
+};
diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts
new file mode 100644
index 000000000..f8832a15e
--- /dev/null
+++ b/arch/arc/boot/dts/nsim_700.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "snps,nsim";
+	compatible = "snps,nsim";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <80000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns16550a";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts
new file mode 100644
index 000000000..fc207c4a4
--- /dev/null
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "snps,nsimosci";
+	compatible = "snps,nsimosci";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		/* this is for console on PGU */
+		/* bootargs = "console=tty0 consoleblank=0"; */
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <20000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <11>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
+			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+		ps2: ps2@f9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xf9000400 0x14>;
+			interrupts = <13>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@f0003000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf0003000 0x44>;
+			interrupts = <7>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/nsimosci_hs.dts b/arch/arc/boot/dts/nsimosci_hs.dts
new file mode 100644
index 000000000..71f1f8416
--- /dev/null
+++ b/arch/arc/boot/dts/nsimosci_hs.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	model = "snps,nsimosci_hs";
+	compatible = "snps,nsimosci_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		/* this is for console on PGU */
+		/* bootargs = "console=tty0 consoleblank=0"; */
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <20000000>;
+		};
+
+		core_intc: core-interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
+			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+		ps2: ps2@f9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xf9000400 0x14>;
+			interrupts = <27>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@f0003000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf0003000 0x44>;
+			interrupts = <25>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/nsimosci_hs_idu.dts b/arch/arc/boot/dts/nsimosci_hs_idu.dts
new file mode 100644
index 000000000..69d794c59
--- /dev/null
+++ b/arch/arc/boot/dts/nsimosci_hs_idu.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	model = "snps,nsimosci_hs-smp";
+	compatible = "snps,nsimosci_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24 print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <5000000>;
+		};
+
+		core_intc: core-interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <0>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
+			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+		ps2: ps2@f9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xf9000400 0x14>;
+			interrupts = <3>;
+			interrupt-parent = <&idu_intc>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@f0003000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf0003000 0x44>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi
new file mode 100644
index 000000000..ba86b8036
--- /dev/null
+++ b/arch/arc/boot/dts/skeleton.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value.
+ */
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,arc770d";
+			reg = <0>;
+			clocks = <&core_clk>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <3>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* TIMER1 for free running clocksource */
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&core_clk>;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/arch/arc/boot/dts/skeleton_hs.dtsi b/arch/arc/boot/dts/skeleton_hs.dtsi
new file mode 100644
index 000000000..8fb49890e
--- /dev/null
+++ b/arch/arc/boot/dts/skeleton_hs.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <0>;
+			clocks = <&core_clk>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <16>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* 64-bit Local RTC: preferred clocksource for UP */
+	rtc {
+		compatible = "snps,archs-timer-rtc";
+		clocks = <&core_clk>;
+	};
+
+	/* TIMER1 for free running clocksource: Fallback if rtc not found */
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&core_clk>;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/arch/arc/boot/dts/skeleton_hs_idu.dtsi b/arch/arc/boot/dts/skeleton_hs_idu.dtsi
new file mode 100644
index 000000000..75f5c9ecb
--- /dev/null
+++ b/arch/arc/boot/dts/skeleton_hs_idu.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <0>;
+			clocks = <&core_clk>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <1>;
+			clocks = <&core_clk>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <2>;
+			clocks = <&core_clk>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <3>;
+			clocks = <&core_clk>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <16>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* 64-bit Global Free Running Counter */
+	gfrc {
+		compatible = "snps,archs-timer-gfrc";
+		clocks = <&core_clk>;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
new file mode 100644
index 000000000..c21d0eb07
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013, 2014 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC003 CPU card: HS38x UP configuration (VDK version)
+ */
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <2403200>;
+			interrupt-parent = <&core_intc>;
+			interrupts = <19>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+	};
+
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0xe0012000 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		interrupts = < 18 >;
+	};
+
+	memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x80000000 0x40000000>;
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512MiB */
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
new file mode 100644
index 000000000..4d348853a
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC003 CPU card:
+ * HS38x2 (Dual Core) with IDU intc (VDK version)
+ */
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			#interrupt-cells = <1>;
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <2403200>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <2>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+	};
+
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0xe0012000 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&idu_intc>;
+		interrupts = <0>;
+	};
+
+	memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x80000000 0x40000000>;
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512MiB */
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
new file mode 100644
index 000000000..90a412026
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for peripherals on the AXS10x mainboard (VDK version)
+ *
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/ {
+	axs10x_mb_vdk {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0xe0000000 0x10000000>;
+		interrupt-parent = <&mb_intc>;
+
+		clocks {
+			apbclk: apbclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			mmcclk: mmcclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			pguclk: pguclk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <25175000>;
+			};
+		};
+
+		ethernet@18000 {
+			#interrupt-cells = <1>;
+			compatible = "snps,dwmac";
+			reg = < 0x18000 0x2000 >;
+			interrupts = < 4 >;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			snps,phy-addr = < 0 >;  // VDK model phy address is 0
+			snps,pbl = < 32 >;
+			clocks = <&apbclk>;
+			clock-names = "stmmaceth";
+		};
+
+		usb@40000 {
+			compatible = "generic-ehci";
+			reg = < 0x40000 0x100 >;
+			interrupts = < 8 >;
+		};
+
+		uart@20000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20000 0x100>;
+			clock-frequency = <2403200>;
+			interrupts = <17>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart@21000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x21000 0x100>;
+			clock-frequency = <2403200>;
+			interrupts = <18>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart@22000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x22000 0x100>;
+			clock-frequency = <2403200>;
+			interrupts = <19>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+/* PGU output directly sent to virtual LCD screen; hdmi controller not modelled */
+		pgu@17000 {
+			compatible = "snps,arcpgu";
+			reg = <0x17000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+/* VDK has additional ps2 keyboard/mouse interface integrated in LCD screen model */
+		ps2: ps2@e0017400 {
+			compatible = "snps,arc_ps2";
+			reg = <0x17400 0x14>;
+			interrupts = <5>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		mmc@15000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x15000 0x400>;
+			fifo-depth = <1024>;
+			card-detect-delay = <200>;
+			clocks = <&apbclk>, <&mmcclk>;
+			clock-names = "biu", "ciu";
+			interrupts = <7>;
+			bus-width = <4>;
+		};
+	};
+
+	/*
+	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
+	 *
+	 * This node is intentionally put outside of MB above becase
+	 * it maps areas outside of MB's 0xez-0xfz.
+	 */
+	uio_ev: uio@d0000000 {
+		compatible = "generic-uio";
+		reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>;
+		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+		interrupt-parent = <&mb_intc>;
+		interrupts = <23>;
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_hs38.dts b/arch/arc/boot/dts/vdk_hs38.dts
new file mode 100644
index 000000000..cddea7eac
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_hs38.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * ARC HS38 Virtual Development Kit (VDK)
+ */
+/dts-v1/;
+
+/include/ "vdk_axc003.dtsi"
+/include/ "vdk_axs10x_mb.dtsi"
+
+/ {
+	model = "snps,vdk_archs";
+	compatible = "snps,axs103";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0";
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_hs38_smp.dts b/arch/arc/boot/dts/vdk_hs38_smp.dts
new file mode 100644
index 000000000..f57d1922e
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_hs38_smp.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * ARC HS38 Virtual Development Kit, SMP version (VDK)
+ */
+/dts-v1/;
+
+/include/ "vdk_axc003_idu.dtsi"
+/include/ "vdk_axs10x_mb.dtsi"
+
+/ {
+	model = "snps,vdk_archs-smp";
+	compatible = "snps,axs103";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=640x480-24";
+	};
+};
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
new file mode 100644
index 000000000..817641604
--- /dev/null
+++ b/arch/arc/configs/axs101_defconfig
@@ -0,0 +1,104 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARC_PLAT_AXS10X=y
+CONFIG_AXS101=y
+CONFIG_ARC_CACHE_LINE_SHIFT=5
+CONFIG_ARC_BUILTIN_DTB_NAME="axs101"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_NATIONAL_PHY=y
+# CONFIG_USB_NET_DRIVERS is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=y
+CONFIG_MOUSE_SYNAPTICS_USB=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+# CONFIG_HWMON is not set
+CONFIG_DRM=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_ARCPGU=m
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
new file mode 100644
index 000000000..d51812754
--- /dev/null
+++ b/arch/arc/configs/axs103_defconfig
@@ -0,0 +1,102 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARC_PLAT_AXS10X=y
+CONFIG_AXS103=y
+CONFIG_ISA_ARCV2=y
+CONFIG_ARC_BUILTIN_DTB_NAME="axs103"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_NATIONAL_PHY=y
+# CONFIG_USB_NET_DRIVERS is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=y
+CONFIG_MOUSE_SYNAPTICS_USB=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
new file mode 100644
index 000000000..2f336d99a
--- /dev/null
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -0,0 +1,105 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARC_PLAT_AXS10X=y
+CONFIG_AXS103=y
+CONFIG_ISA_ARCV2=y
+CONFIG_SMP=y
+CONFIG_ARC_BUILTIN_DTB_NAME="axs103_idu"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_NATIONAL_PHY=y
+# CONFIG_USB_NET_DRIVERS is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_MOUSE_SERIAL=y
+CONFIG_MOUSE_SYNAPTICS_USB=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+# CONFIG_HWMON is not set
+CONFIG_DRM=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_ARCPGU=m
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig
new file mode 100644
index 000000000..899b2fd5c
--- /dev/null
+++ b/arch/arc/configs/haps_hs_defconfig
@@ -0,0 +1,63 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_VIRTIO_BLK=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+# CONFIG_ETHERNET is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_VIRTIO_MMIO=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig
new file mode 100644
index 000000000..0d32aac80
--- /dev/null
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@@ -0,0 +1,63 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_SMP=y
+CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_ETHERNET is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+# CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
new file mode 100644
index 000000000..d18378d2c
--- /dev/null
+++ b/arch/arc/configs/hsdk_defconfig
@@ -0,0 +1,94 @@
+CONFIG_SYSVIPC=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_ARC_SOC_HSDK=y
+CONFIG_ISA_ARCV2=y
+CONFIG_SMP=y
+CONFIG_LINUX_LINK_BASE=0x90000000
+CONFIG_LINUX_RAM_BASE=0x80000000
+CONFIG_ARC_BUILTIN_DTB_NAME="hsdk"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_STMMAC_ETH=y
+CONFIG_MICREL_PHY=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_MMIO=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_SNPS_CREG=y
+# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_DRM=y
+# CONFIG_DRM_FBDEV_EMULATION is not set
+CONFIG_DRM_UDL=y
+CONFIG_DRM_ETNAVIV=y
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_AXI_DMAC=y
+CONFIG_IIO=y
+CONFIG_TI_ADC108S102=y
+CONFIG_EXT3_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_ECHAINIV=y
diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig
new file mode 100644
index 000000000..3e9829775
--- /dev/null
+++ b/arch/arc/configs/nsim_700_defconfig
@@ -0,0 +1,59 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
+CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_ETHERNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+# CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
new file mode 100644
index 000000000..502c87f35
--- /dev/null
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -0,0 +1,67 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_CYPRESS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_DRM=y
+CONFIG_DRM_ARCPGU=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig
new file mode 100644
index 000000000..f721cc399
--- /dev/null
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@@ -0,0 +1,65 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ISA_ARCV2=y
+CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs"
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_DRM=y
+CONFIG_DRM_ARCPGU=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig
new file mode 100644
index 000000000..1419fc946
--- /dev/null
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -0,0 +1,74 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ISA_ARCV2=y
+CONFIG_SMP=y
+# CONFIG_ARC_TIMERS_64BIT is not set
+CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_DRM=y
+CONFIG_DRM_ARCPGU=y
+CONFIG_LOGO=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_FTRACE=y
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
new file mode 100644
index 000000000..6f0d2be9d
--- /dev/null
+++ b/arch/arc/configs/tb10x_defconfig
@@ -0,0 +1,100 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="tb10x"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio"
+CONFIG_INITRAMFS_ROOT_UID=2100
+CONFIG_INITRAMFS_ROOT_GID=501
+# CONFIG_RD_GZIP is not set
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLOCK is not set
+CONFIG_ARC_PLAT_TB10X=y
+CONFIG_ARC_CACHE_LINE_SHIFT=5
+CONFIG_HZ=250
+CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_ASYNC_TX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_INSTALL=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
new file mode 100644
index 000000000..d3ef189c7
--- /dev/null
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -0,0 +1,94 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARC_PLAT_AXS10X=y
+CONFIG_AXS103=y
+CONFIG_ISA_ARCV2=y
+CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38"
+CONFIG_PREEMPT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_SLRAM=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_NATIONAL_PHY=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
new file mode 100644
index 000000000..944b34702
--- /dev/null
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -0,0 +1,100 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARC_PLAT_AXS10X=y
+CONFIG_AXS103=y
+CONFIG_ISA_ARCV2=y
+CONFIG_SMP=y
+# CONFIG_ARC_TIMERS_64BIT is not set
+CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
+CONFIG_PREEMPT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_SLRAM=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_NATIONAL_PHY=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_DRM=y
+CONFIG_DRM_ARCPGU=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
new file mode 100644
index 000000000..3c1afa524
--- /dev/null
+++ b/arch/arc/include/asm/Kbuild
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+generic-y += extable.h
+generic-y += kvm_para.h
+generic-y += mcs_spinlock.h
+generic-y += parport.h
+generic-y += user.h
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
new file mode 100644
index 000000000..216202319
--- /dev/null
+++ b/arch/arc/include/asm/arcregs.h
@@ -0,0 +1,359 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_ARCREGS_H
+#define _ASM_ARC_ARCREGS_H
+
+/* Build Configuration Registers */
+#define ARC_REG_AUX_DCCM	0x18	/* DCCM Base Addr ARCv2 */
+#define ARC_REG_ERP_CTRL	0x3F	/* ARCv2 Error protection control */
+#define ARC_REG_DCCM_BASE_BUILD	0x61	/* DCCM Base Addr ARCompact */
+#define ARC_REG_CRC_BCR		0x62
+#define ARC_REG_VECBASE_BCR	0x68
+#define ARC_REG_PERIBASE_BCR	0x69
+#define ARC_REG_FP_BCR		0x6B	/* ARCompact: Single-Precision FPU */
+#define ARC_REG_DPFP_BCR	0x6C	/* ARCompact: Dbl Precision FPU */
+#define ARC_REG_ERP_BUILD	0xc7	/* ARCv2 Error protection Build: ECC/Parity */
+#define ARC_REG_FP_V2_BCR	0xc8	/* ARCv2 FPU */
+#define ARC_REG_SLC_BCR		0xce
+#define ARC_REG_DCCM_BUILD	0x74	/* DCCM size (common) */
+#define ARC_REG_AP_BCR		0x76
+#define ARC_REG_ICCM_BUILD	0x78	/* ICCM size (common) */
+#define ARC_REG_XY_MEM_BCR	0x79
+#define ARC_REG_MAC_BCR		0x7a
+#define ARC_REG_MUL_BCR		0x7b
+#define ARC_REG_SWAP_BCR	0x7c
+#define ARC_REG_NORM_BCR	0x7d
+#define ARC_REG_MIXMAX_BCR	0x7e
+#define ARC_REG_BARREL_BCR	0x7f
+#define ARC_REG_D_UNCACH_BCR	0x6A
+#define ARC_REG_BPU_BCR		0xc0
+#define ARC_REG_ISA_CFG_BCR	0xc1
+#define ARC_REG_LPB_BUILD	0xE9	/* ARCv2 Loop Buffer Build */
+#define ARC_REG_RTT_BCR		0xF2
+#define ARC_REG_IRQ_BCR		0xF3
+#define ARC_REG_MICRO_ARCH_BCR	0xF9	/* ARCv2 Product revision */
+#define ARC_REG_SMART_BCR	0xFF
+#define ARC_REG_CLUSTER_BCR	0xcf
+#define ARC_REG_AUX_ICCM	0x208	/* ICCM Base Addr (ARCv2) */
+#define ARC_REG_LPB_CTRL	0x488	/* ARCv2 Loop Buffer control */
+#define ARC_REG_FPU_CTRL	0x300
+#define ARC_REG_FPU_STATUS	0x301
+
+/* Common for ARCompact and ARCv2 status register */
+#define ARC_REG_STATUS32	0x0A
+
+/* status32 Bits Positions */
+#define STATUS_AE_BIT		5	/* Exception active */
+#define STATUS_DE_BIT		6	/* PC is in delay slot */
+#define STATUS_U_BIT		7	/* User/Kernel mode */
+#define STATUS_Z_BIT            11
+#define STATUS_L_BIT		12	/* Loop inhibit */
+
+/* These masks correspond to the status word(STATUS_32) bits */
+#define STATUS_AE_MASK		(1<<STATUS_AE_BIT)
+#define STATUS_DE_MASK		(1<<STATUS_DE_BIT)
+#define STATUS_U_MASK		(1<<STATUS_U_BIT)
+#define STATUS_Z_MASK		(1<<STATUS_Z_BIT)
+#define STATUS_L_MASK		(1<<STATUS_L_BIT)
+
+/*
+ * ECR: Exception Cause Reg bits-n-pieces
+ * [23:16] = Exception Vector
+ * [15: 8] = Exception Cause Code
+ * [ 7: 0] = Exception Parameters (for certain types only)
+ */
+#ifdef CONFIG_ISA_ARCOMPACT
+#define ECR_V_MEM_ERR			0x01
+#define ECR_V_INSN_ERR			0x02
+#define ECR_V_MACH_CHK			0x20
+#define ECR_V_ITLB_MISS			0x21
+#define ECR_V_DTLB_MISS			0x22
+#define ECR_V_PROTV			0x23
+#define ECR_V_TRAP			0x25
+#else
+#define ECR_V_MEM_ERR			0x01
+#define ECR_V_INSN_ERR			0x02
+#define ECR_V_MACH_CHK			0x03
+#define ECR_V_ITLB_MISS			0x04
+#define ECR_V_DTLB_MISS			0x05
+#define ECR_V_PROTV			0x06
+#define ECR_V_TRAP			0x09
+#define ECR_V_MISALIGN			0x0d
+#endif
+
+/* DTLB Miss and Protection Violation Cause Codes */
+
+#define ECR_C_PROTV_INST_FETCH		0x00
+#define ECR_C_PROTV_LOAD		0x01
+#define ECR_C_PROTV_STORE		0x02
+#define ECR_C_PROTV_XCHG		0x03
+#define ECR_C_PROTV_MISALIG_DATA	0x04
+
+#define ECR_C_BIT_PROTV_MISALIG_DATA	10
+
+/* Machine Check Cause Code Values */
+#define ECR_C_MCHK_DUP_TLB		0x01
+
+/* DTLB Miss Exception Cause Code Values */
+#define ECR_C_BIT_DTLB_LD_MISS		8
+#define ECR_C_BIT_DTLB_ST_MISS		9
+
+/* Auxiliary registers */
+#define AUX_IDENTITY		4
+#define AUX_EXEC_CTRL		8
+#define AUX_INTR_VEC_BASE	0x25
+#define AUX_VOL			0x5e
+
+/*
+ * Floating Pt Registers
+ * Status regs are read-only (build-time) so need not be saved/restored
+ */
+#define ARC_AUX_FP_STAT         0x300
+#define ARC_AUX_DPFP_1L         0x301
+#define ARC_AUX_DPFP_1H         0x302
+#define ARC_AUX_DPFP_2L         0x303
+#define ARC_AUX_DPFP_2H         0x304
+#define ARC_AUX_DPFP_STAT       0x305
+
+/*
+ * DSP-related registers
+ * Registers names must correspond to dsp_callee_regs structure fields names
+ * for automatic offset calculation in DSP_AUX_SAVE_RESTORE macros.
+ */
+#define ARC_AUX_DSP_BUILD	0x7A
+#define ARC_AUX_ACC0_LO		0x580
+#define ARC_AUX_ACC0_GLO	0x581
+#define ARC_AUX_ACC0_HI		0x582
+#define ARC_AUX_ACC0_GHI	0x583
+#define ARC_AUX_DSP_BFLY0	0x598
+#define ARC_AUX_DSP_CTRL	0x59F
+#define ARC_AUX_DSP_FFT_CTRL	0x59E
+
+#define ARC_AUX_AGU_BUILD	0xCC
+#define ARC_AUX_AGU_AP0		0x5C0
+#define ARC_AUX_AGU_AP1		0x5C1
+#define ARC_AUX_AGU_AP2		0x5C2
+#define ARC_AUX_AGU_AP3		0x5C3
+#define ARC_AUX_AGU_OS0		0x5D0
+#define ARC_AUX_AGU_OS1		0x5D1
+#define ARC_AUX_AGU_MOD0	0x5E0
+#define ARC_AUX_AGU_MOD1	0x5E1
+#define ARC_AUX_AGU_MOD2	0x5E2
+#define ARC_AUX_AGU_MOD3	0x5E3
+
+#ifndef __ASSEMBLY__
+
+#include <soc/arc/aux.h>
+
+/* Helpers */
+#define TO_KB(bytes)		((bytes) >> 10)
+#define TO_MB(bytes)		(TO_KB(bytes) >> 10)
+#define PAGES_TO_KB(n_pages)	((n_pages) << (PAGE_SHIFT - 10))
+#define PAGES_TO_MB(n_pages)	(PAGES_TO_KB(n_pages) >> 10)
+
+
+/*
+ ***************************************************************
+ * Build Configuration Registers, with encoded hardware config
+ */
+struct bcr_identity {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int chip_id:16, cpu_id:8, family:8;
+#else
+	unsigned int family:8, cpu_id:8, chip_id:16;
+#endif
+};
+
+struct bcr_isa_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int div_rem:4, pad2:4, ldd:1, unalign:1, atomic:1, be:1,
+		     pad1:12, ver:8;
+#else
+	unsigned int ver:8, pad1:12, be:1, atomic:1, unalign:1,
+		     ldd:1, pad2:4, div_rem:4;
+#endif
+};
+
+struct bcr_uarch_build_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:8, prod:8, maj:8, min:8;
+#else
+	unsigned int min:8, maj:8, prod:8, pad:8;
+#endif
+};
+
+struct bcr_mpy {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8;
+#else
+	unsigned int ver:8, type:2, cycles:2, dsp:4, x1616:8, pad:8;
+#endif
+};
+
+struct bcr_iccm_arcompact {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int base:16, pad:5, sz:3, ver:8;
+#else
+	unsigned int ver:8, sz:3, pad:5, base:16;
+#endif
+};
+
+struct bcr_iccm_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:8, sz11:4, sz01:4, sz10:4, sz00:4, ver:8;
+#else
+	unsigned int ver:8, sz00:4, sz10:4, sz01:4, sz11:4, pad:8;
+#endif
+};
+
+struct bcr_dccm_arcompact {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int res:21, sz:3, ver:8;
+#else
+	unsigned int ver:8, sz:3, res:21;
+#endif
+};
+
+struct bcr_dccm_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:12, cyc:3, pad1:1, sz1:4, sz0:4, ver:8;
+#else
+	unsigned int ver:8, sz0:4, sz1:4, pad1:1, cyc:3, pad2:12;
+#endif
+};
+
+/* ARCompact: Both SP and DP FPU BCRs have same format */
+struct bcr_fp_arcompact {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int fast:1, ver:8;
+#else
+	unsigned int ver:8, fast:1;
+#endif
+};
+
+struct bcr_fp_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:15, dp:1, pad1:7, sp:1, ver:8;
+#else
+	unsigned int ver:8, sp:1, pad1:7, dp:1, pad2:15;
+#endif
+};
+
+struct bcr_actionpoint {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:21, min:1, num:2, ver:8;
+#else
+	unsigned int ver:8, num:2, min:1, pad:21;
+#endif
+};
+
+#include <soc/arc/timers.h>
+
+struct bcr_bpu_arcompact {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:19, fam:1, pad:2, ent:2, ver:8;
+#else
+	unsigned int ver:8, ent:2, pad:2, fam:1, pad2:19;
+#endif
+};
+
+struct bcr_bpu_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:6, fbe:2, tqe:2, ts:4, ft:1, rse:2, pte:3, bce:3, ver:8;
+#else
+	unsigned int ver:8, bce:3, pte:3, rse:2, ft:1, ts:4, tqe:2, fbe:2, pad:6;
+#endif
+};
+
+/* Error Protection Build: ECC/Parity */
+struct bcr_erp {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad3:5, mmu:3, pad2:4, ic:3, dc:3, pad1:6, ver:8;
+#else
+	unsigned int ver:8, pad1:6, dc:3, ic:3, pad2:4, mmu:3, pad3:5;
+#endif
+};
+
+/* Error Protection Control */
+struct ctl_erp {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:27, mpd:1, pad1:2, dpd:1, dpi:1;
+#else
+	unsigned int dpi:1, dpd:1, pad1:2, mpd:1, pad2:27;
+#endif
+};
+
+struct bcr_lpb {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:16, entries:8, ver:8;
+#else
+	unsigned int ver:8, entries:8, pad:16;
+#endif
+};
+
+struct bcr_generic {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int info:24, ver:8;
+#else
+	unsigned int ver:8, info:24;
+#endif
+};
+
+/*
+ *******************************************************************
+ * Generic structures to hold build configuration used at runtime
+ */
+
+struct cpuinfo_arc_mmu {
+	unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, pad:10, sasid:1, pae:1;
+	unsigned int sets:12, ways:4, u_dtlb:8, u_itlb:8;
+};
+
+struct cpuinfo_arc_cache {
+	unsigned int sz_k:14, line_len:8, assoc:4, alias:1, vipt:1, pad:4;
+};
+
+struct cpuinfo_arc_bpu {
+	unsigned int ver, full, num_cache, num_pred, ret_stk;
+};
+
+struct cpuinfo_arc_ccm {
+	unsigned int base_addr, sz;
+};
+
+struct cpuinfo_arc {
+	struct cpuinfo_arc_cache icache, dcache, slc;
+	struct cpuinfo_arc_mmu mmu;
+	struct cpuinfo_arc_bpu bpu;
+	struct bcr_identity core;
+	struct bcr_isa_arcv2 isa;
+	const char *release, *name;
+	unsigned int vec_base;
+	struct cpuinfo_arc_ccm iccm, dccm;
+	struct {
+		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
+			     fpu_sp:1, fpu_dp:1, dual:1, dual_enb:1, pad2:4,
+			     ap_num:4, ap_full:1, smart:1, rtt:1, pad3:1,
+			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
+	} extn;
+	struct bcr_mpy extn_mpy;
+};
+
+extern struct cpuinfo_arc cpuinfo_arc700[];
+
+static inline int is_isa_arcv2(void)
+{
+	return IS_ENABLED(CONFIG_ISA_ARCV2);
+}
+
+static inline int is_isa_arcompact(void)
+{
+	return IS_ENABLED(CONFIG_ISA_ARCOMPACT);
+}
+
+#endif /* __ASEMBLY__ */
+
+#endif /* _ASM_ARC_ARCREGS_H */
diff --git a/arch/arc/include/asm/asm-offsets.h b/arch/arc/include/asm/asm-offsets.h
new file mode 100644
index 000000000..32a1d3d51
--- /dev/null
+++ b/arch/arc/include/asm/asm-offsets.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <generated/asm-offsets.h>
diff --git a/arch/arc/include/asm/asserts.h b/arch/arc/include/asm/asserts.h
new file mode 100644
index 000000000..108f33be6
--- /dev/null
+++ b/arch/arc/include/asm/asserts.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+#ifndef __ASM_ARC_ASSERTS_H
+#define __ASM_ARC_ASSERTS_H
+
+/* Helpers to sanitize config options. */
+
+void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena);
+void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena);
+
+/*
+ * Check required config option:
+ *  - panic in case of OPT enabled but corresponding HW absent.
+ *  - warn in case of OPT disabled but corresponding HW exists.
+*/
+#define CHK_OPT_STRICT(opt_name, hw_exists)				\
+({									\
+	chk_opt_strict(#opt_name, hw_exists, IS_ENABLED(opt_name));	\
+})
+
+/*
+ * Check optional config option:
+ *  - panic in case of OPT enabled but corresponding HW absent.
+*/
+#define CHK_OPT_WEAK(opt_name, hw_exists)				\
+({									\
+	chk_opt_weak(#opt_name, hw_exists, IS_ENABLED(opt_name));	\
+})
+
+#endif /* __ASM_ARC_ASSERTS_H */
diff --git a/arch/arc/include/asm/atomic-llsc.h b/arch/arc/include/asm/atomic-llsc.h
new file mode 100644
index 000000000..5258cb81a
--- /dev/null
+++ b/arch/arc/include/asm/atomic-llsc.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_ATOMIC_LLSC_H
+#define _ASM_ARC_ATOMIC_LLSC_H
+
+#define arch_atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
+
+#define ATOMIC_OP(op, asm_op)					\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned int val;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
+	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
+	  [i]	"ir"	(i)						\
+	: "cc", "memory");						\
+}									\
+
+#define ATOMIC_OP_RETURN(op, asm_op)				\
+static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
+{									\
+	unsigned int val;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val)						\
+	: [ctr]	"r"	(&v->counter),					\
+	  [i]	"ir"	(i)						\
+	: "cc", "memory");						\
+									\
+	return val;							\
+}
+
+#define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
+#define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
+
+#define ATOMIC_FETCH_OP(op, asm_op)				\
+static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
+{									\
+	unsigned int val, orig;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[orig], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val),						\
+	  [orig] "=&r" (orig)						\
+	: [ctr]	"r"	(&v->counter),					\
+	  [i]	"ir"	(i)						\
+	: "cc", "memory");						\
+									\
+	return orig;							\
+}
+
+#define arch_atomic_fetch_add_relaxed		arch_atomic_fetch_add_relaxed
+#define arch_atomic_fetch_sub_relaxed		arch_atomic_fetch_sub_relaxed
+
+#define arch_atomic_fetch_and_relaxed		arch_atomic_fetch_and_relaxed
+#define arch_atomic_fetch_andnot_relaxed	arch_atomic_fetch_andnot_relaxed
+#define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
+#define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
+
+#define ATOMIC_OPS(op, asm_op)					\
+	ATOMIC_OP(op, asm_op)					\
+	ATOMIC_OP_RETURN(op, asm_op)				\
+	ATOMIC_FETCH_OP(op, asm_op)
+
+ATOMIC_OPS(add, add)
+ATOMIC_OPS(sub, sub)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op, asm_op)					\
+	ATOMIC_OP(op, asm_op)					\
+	ATOMIC_FETCH_OP(op, asm_op)
+
+ATOMIC_OPS(and, and)
+ATOMIC_OPS(andnot, bic)
+ATOMIC_OPS(or, or)
+ATOMIC_OPS(xor, xor)
+
+#define arch_atomic_andnot		arch_atomic_andnot
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif
diff --git a/arch/arc/include/asm/atomic-spinlock.h b/arch/arc/include/asm/atomic-spinlock.h
new file mode 100644
index 000000000..2c830347b
--- /dev/null
+++ b/arch/arc/include/asm/atomic-spinlock.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_ATOMIC_SPLOCK_H
+#define _ASM_ARC_ATOMIC_SPLOCK_H
+
+/*
+ * Non hardware assisted Atomic-R-M-W
+ * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
+ */
+
+static inline void arch_atomic_set(atomic_t *v, int i)
+{
+	/*
+	 * Independent of hardware support, all of the atomic_xxx() APIs need
+	 * to follow the same locking rules to make sure that a "hardware"
+	 * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn
+	 * sequence
+	 *
+	 * Thus atomic_set() despite being 1 insn (and seemingly atomic)
+	 * requires the locking.
+	 */
+	unsigned long flags;
+
+	atomic_ops_lock(flags);
+	WRITE_ONCE(v->counter, i);
+	atomic_ops_unlock(flags);
+}
+
+#define arch_atomic_set_release(v, i)	arch_atomic_set((v), (i))
+
+#define ATOMIC_OP(op, c_op, asm_op)					\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned long flags;						\
+									\
+	atomic_ops_lock(flags);						\
+	v->counter c_op i;						\
+	atomic_ops_unlock(flags);					\
+}
+
+#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+static inline int arch_atomic_##op##_return(int i, atomic_t *v)		\
+{									\
+	unsigned long flags;						\
+	unsigned int temp;						\
+									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(flags);						\
+	temp = v->counter;						\
+	temp c_op i;							\
+	v->counter = temp;						\
+	atomic_ops_unlock(flags);					\
+									\
+	return temp;							\
+}
+
+#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
+static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
+{									\
+	unsigned long flags;						\
+	unsigned int orig;						\
+									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(flags);						\
+	orig = v->counter;						\
+	v->counter c_op i;						\
+	atomic_ops_unlock(flags);					\
+									\
+	return orig;							\
+}
+
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(add, +=, add)
+ATOMIC_OPS(sub, -=, sub)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(and, &=, and)
+ATOMIC_OPS(andnot, &= ~, bic)
+ATOMIC_OPS(or, |=, or)
+ATOMIC_OPS(xor, ^=, xor)
+
+#define arch_atomic_andnot		arch_atomic_andnot
+#define arch_atomic_fetch_andnot	arch_atomic_fetch_andnot
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
new file mode 100644
index 000000000..52ee51e1f
--- /dev/null
+++ b/arch/arc/include/asm/atomic.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_ATOMIC_H
+#define _ASM_ARC_ATOMIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/cmpxchg.h>
+#include <asm/barrier.h>
+#include <asm/smp.h>
+
+#define arch_atomic_read(v)  READ_ONCE((v)->counter)
+
+#ifdef CONFIG_ARC_HAS_LLSC
+#include <asm/atomic-llsc.h>
+#else
+#include <asm/atomic-spinlock.h>
+#endif
+
+#define arch_atomic_cmpxchg(v, o, n)					\
+({									\
+	arch_cmpxchg(&((v)->counter), (o), (n));			\
+})
+
+#ifdef arch_cmpxchg_relaxed
+#define arch_atomic_cmpxchg_relaxed(v, o, n)				\
+({									\
+	arch_cmpxchg_relaxed(&((v)->counter), (o), (n));		\
+})
+#endif
+
+#define arch_atomic_xchg(v, n)						\
+({									\
+	arch_xchg(&((v)->counter), (n));				\
+})
+
+#ifdef arch_xchg_relaxed
+#define arch_atomic_xchg_relaxed(v, n)					\
+({									\
+	arch_xchg_relaxed(&((v)->counter), (n));			\
+})
+#endif
+
+/*
+ * 64-bit atomics
+ */
+#ifdef CONFIG_GENERIC_ATOMIC64
+#include <asm-generic/atomic64.h>
+#else
+#include <asm/atomic64-arcv2.h>
+#endif
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/atomic64-arcv2.h b/arch/arc/include/asm/atomic64-arcv2.h
new file mode 100644
index 000000000..9089f34ba
--- /dev/null
+++ b/arch/arc/include/asm/atomic64-arcv2.h
@@ -0,0 +1,250 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD)
+ *  - The address HAS to be 64-bit aligned
+ */
+
+#ifndef _ASM_ARC_ATOMIC64_ARCV2_H
+#define _ASM_ARC_ATOMIC64_ARCV2_H
+
+typedef struct {
+	s64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(a) { (a) }
+
+static inline s64 arch_atomic64_read(const atomic64_t *v)
+{
+	s64 val;
+
+	__asm__ __volatile__(
+	"	ldd   %0, [%1]	\n"
+	: "=r"(val)
+	: "r"(&v->counter));
+
+	return val;
+}
+
+static inline void arch_atomic64_set(atomic64_t *v, s64 a)
+{
+	/*
+	 * This could have been a simple assignment in "C" but would need
+	 * explicit volatile. Otherwise gcc optimizers could elide the store
+	 * which borked atomic64 self-test
+	 * In the inline asm version, memory clobber needed for exact same
+	 * reason, to tell gcc about the store.
+	 *
+	 * This however is not needed for sibling atomic64_add() etc since both
+	 * load/store are explicitly done in inline asm. As long as API is used
+	 * for each access, gcc has no way to optimize away any load/store
+	 */
+	__asm__ __volatile__(
+	"	std   %0, [%1]	\n"
+	:
+	: "r"(a), "r"(&v->counter)
+	: "memory");
+}
+
+#define ATOMIC64_OP(op, op1, op2)					\
+static inline void arch_atomic64_##op(s64 a, atomic64_t *v)		\
+{									\
+	s64 val;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd  %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(val)							\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc", "memory");						\
+}									\
+
+#define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
+static inline s64 arch_atomic64_##op##_return_relaxed(s64 a, atomic64_t *v)	\
+{									\
+	s64 val;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: [val] "=&r"(val)						\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc", "memory");						\
+									\
+	return val;							\
+}
+
+#define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
+#define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+
+#define ATOMIC64_FETCH_OP(op, op1, op2)		        		\
+static inline s64 arch_atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v)	\
+{									\
+	s64 val, orig;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%2]	\n"				\
+	"	" #op1 " %L1, %L0, %L3	\n"				\
+	"	" #op2 " %H1, %H0, %H3	\n"				\
+	"	scondd   %1, [%2]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(orig), "=&r"(val)					\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc", "memory");						\
+									\
+	return orig;							\
+}
+
+#define arch_atomic64_fetch_add_relaxed		arch_atomic64_fetch_add_relaxed
+#define arch_atomic64_fetch_sub_relaxed		arch_atomic64_fetch_sub_relaxed
+
+#define arch_atomic64_fetch_and_relaxed		arch_atomic64_fetch_and_relaxed
+#define arch_atomic64_fetch_andnot_relaxed	arch_atomic64_fetch_andnot_relaxed
+#define arch_atomic64_fetch_or_relaxed		arch_atomic64_fetch_or_relaxed
+#define arch_atomic64_fetch_xor_relaxed		arch_atomic64_fetch_xor_relaxed
+
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_OP_RETURN(op, op1, op2)				\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+ATOMIC64_OPS(add, add.f, adc)
+ATOMIC64_OPS(sub, sub.f, sbc)
+
+#undef ATOMIC64_OPS
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+ATOMIC64_OPS(and, and, and)
+ATOMIC64_OPS(andnot, bic, bic)
+ATOMIC64_OPS(or, or, or)
+ATOMIC64_OPS(xor, xor, xor)
+
+#define arch_atomic64_andnot		arch_atomic64_andnot
+
+#undef ATOMIC64_OPS
+#undef ATOMIC64_FETCH_OP
+#undef ATOMIC64_OP_RETURN
+#undef ATOMIC64_OP
+
+static inline s64
+arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
+{
+	s64 prev;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	brne    %L0, %L2, 2f	\n"
+	"	brne    %H0, %H2, 2f	\n"
+	"	scondd  %3, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "ir"(expected), "r"(new)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return prev;
+}
+
+static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
+{
+	s64 prev;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	scondd  %2, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "r"(new)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return prev;
+}
+
+/**
+ * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic64_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+
+static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
+{
+	s64 val;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	sub.f   %L0, %L0, 1	# w0 - 1, set C on borrow\n"
+	"	sub.c   %H0, %H0, 1	# if C set, w1 - 1\n"
+	"	brlt    %H0, 0, 2f	\n"
+	"	scondd  %0, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(val)
+	: "r"(&v->counter)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return val;
+}
+#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
+
+/**
+ * arch_atomic64_fetch_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, if it was not @u.
+ * Returns the old value of @v
+ */
+static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
+{
+	s64 old, temp;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%2]	\n"
+	"	brne	%L0, %L4, 2f	# continue to add since v != u \n"
+	"	breq.d	%H0, %H4, 3f	# return since v == u \n"
+	"2:				\n"
+	"	add.f   %L1, %L0, %L3	\n"
+	"	adc     %H1, %H0, %H3	\n"
+	"	scondd  %1, [%2]	\n"
+	"	bnz     1b		\n"
+	"3:				\n"
+	: "=&r"(old), "=&r" (temp)
+	: "r"(&v->counter), "r"(a), "r"(u)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return old;
+}
+#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
+
+#endif
diff --git a/arch/arc/include/asm/barrier.h b/arch/arc/include/asm/barrier.h
new file mode 100644
index 000000000..4637de9e0
--- /dev/null
+++ b/arch/arc/include/asm/barrier.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+#ifdef CONFIG_ISA_ARCV2
+
+/*
+ * ARCv2 based HS38 cores are in-order issue, but still weakly ordered
+ * due to micro-arch buffering/queuing of load/store, cache hit vs. miss ...
+ *
+ * Explicit barrier provided by DMB instruction
+ *  - Operand supports fine grained load/store/load+store semantics
+ *  - Ensures that selected memory operation issued before it will complete
+ *    before any subsequent memory operation of same type
+ *  - DMB guarantees SMP as well as local barrier semantics
+ *    (asm-generic/barrier.h ensures sane smp_*mb if not defined here, i.e.
+ *    UP: barrier(), SMP: smp_*mb == *mb)
+ *  - DSYNC provides DMB+completion_of_cache_bpu_maintenance_ops hence not needed
+ *    in the general case. Plus it only provides full barrier.
+ */
+
+#define mb()	asm volatile("dmb 3\n" : : : "memory")
+#define rmb()	asm volatile("dmb 1\n" : : : "memory")
+#define wmb()	asm volatile("dmb 2\n" : : : "memory")
+
+#else
+
+/*
+ * ARCompact based cores (ARC700) only have SYNC instruction which is super
+ * heavy weight as it flushes the pipeline as well.
+ * There are no real SMP implementations of such cores.
+ */
+
+#define mb()	asm volatile("sync\n" : : : "memory")
+
+#endif
+
+#include <asm-generic/barrier.h>
+
+#endif
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
new file mode 100644
index 000000000..f5a936496
--- /dev/null
+++ b/arch/arc/include/asm/bitops.h
@@ -0,0 +1,197 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+
+/*
+ * Count the number of zeros, starting from MSB
+ * Helper for fls( ) friends
+ * This is a pure count, so (1-32) or (0-31) doesn't apply
+ * It could be 0 to 32, based on num of 0's in there
+ * clz(0x8000_0000) = 0, clz(0xFFFF_FFFF)=0, clz(0) = 32, clz(1) = 31
+ */
+static inline __attribute__ ((const)) int clz(unsigned int x)
+{
+	unsigned int res;
+
+	__asm__ __volatile__(
+	"	norm.f  %0, %1		\n"
+	"	mov.n   %0, 0		\n"
+	"	add.p   %0, %0, 1	\n"
+	: "=r"(res)
+	: "r"(x)
+	: "cc");
+
+	return res;
+}
+
+static inline int constant_fls(unsigned int x)
+{
+	int r = 32;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff0000u)) {
+		x <<= 16;
+		r -= 16;
+	}
+	if (!(x & 0xff000000u)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf0000000u)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc0000000u)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x80000000u))
+		r -= 1;
+	return r;
+}
+
+/*
+ * fls = Find Last Set in word
+ * @result: [1-32]
+ * fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0
+ */
+static inline __attribute__ ((const)) int fls(unsigned int x)
+{
+	if (__builtin_constant_p(x))
+	       return constant_fls(x);
+
+	return 32 - clz(x);
+}
+
+/*
+ * __fls: Similar to fls, but zero based (0-31)
+ */
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
+{
+	if (!x)
+		return 0;
+	else
+		return fls(x) - 1;
+}
+
+/*
+ * ffs = Find First Set in word (LSB to MSB)
+ * @result: [1-32], 0 if all 0's
+ */
+#define ffs(x)	({ unsigned long __t = (x); fls(__t & -__t); })
+
+/*
+ * __ffs: Similar to ffs, but zero based (0-31)
+ */
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
+{
+	if (!word)
+		return word;
+
+	return ffs(word) - 1;
+}
+
+#else	/* CONFIG_ISA_ARCV2 */
+
+/*
+ * fls = Find Last Set in word
+ * @result: [1-32]
+ * fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0
+ */
+static inline __attribute__ ((const)) int fls(unsigned int x)
+{
+	int n;
+
+	asm volatile(
+	"	fls.f	%0, %1		\n"  /* 0:31; 0(Z) if src 0 */
+	"	add.nz	%0, %0, 1	\n"  /* 0:31 -> 1:32 */
+	: "=r"(n)	/* Early clobber not needed */
+	: "r"(x)
+	: "cc");
+
+	return n;
+}
+
+/*
+ * __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set
+ */
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
+{
+	/* FLS insn has exactly same semantics as the API */
+	return	__builtin_arc_fls(x);
+}
+
+/*
+ * ffs = Find First Set in word (LSB to MSB)
+ * @result: [1-32], 0 if all 0's
+ */
+static inline __attribute__ ((const)) int ffs(unsigned int x)
+{
+	int n;
+
+	asm volatile(
+	"	ffs.f	%0, %1		\n"  /* 0:31; 31(Z) if src 0 */
+	"	add.nz	%0, %0, 1	\n"  /* 0:31 -> 1:32 */
+	"	mov.z	%0, 0		\n"  /* 31(Z)-> 0 */
+	: "=r"(n)	/* Early clobber not needed */
+	: "r"(x)
+	: "cc");
+
+	return n;
+}
+
+/*
+ * __ffs: Similar to ffs, but zero based (0-31)
+ */
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
+{
+	unsigned long n;
+
+	asm volatile(
+	"	ffs.f	%0, %1		\n"  /* 0:31; 31(Z) if src 0 */
+	"	mov.z	%0, 0		\n"  /* 31(Z)-> 0 */
+	: "=r"(n)
+	: "r"(x)
+	: "cc");
+
+	return n;
+
+}
+
+#endif	/* CONFIG_ISA_ARCOMPACT */
+
+/*
+ * ffz = Find First Zero in word.
+ * @return:[0-31], 32 if all 1's
+ */
+#define ffz(x)	__ffs(~(x))
+
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
+
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic-setbit.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/bug.h b/arch/arc/include/asm/bug.h
new file mode 100644
index 000000000..4c453ba96
--- /dev/null
+++ b/arch/arc/include/asm/bug.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_BUG_H
+#define _ASM_ARC_BUG_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+
+struct task_struct;
+
+void show_regs(struct pt_regs *regs);
+void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs,
+		     const char *loglvl);
+void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
+			    unsigned long address);
+void die(const char *str, struct pt_regs *regs, unsigned long address);
+
+#define BUG()	do {								\
+	pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
+	barrier_before_unreachable();						\
+	__builtin_trap();							\
+} while (0)
+
+#define HAVE_ARCH_BUG
+
+#include <asm-generic/bug.h>
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
new file mode 100644
index 000000000..f0f1fc5d6
--- /dev/null
+++ b/arch/arc/include/asm/cache.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ARC_ASM_CACHE_H
+#define __ARC_ASM_CACHE_H
+
+/* In case $$ not config, setup a dummy number for rest of kernel */
+#ifndef CONFIG_ARC_CACHE_LINE_SHIFT
+#define L1_CACHE_SHIFT		6
+#else
+#define L1_CACHE_SHIFT		CONFIG_ARC_CACHE_LINE_SHIFT
+#endif
+
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+#define CACHE_LINE_MASK		(~(L1_CACHE_BYTES - 1))
+
+/*
+ * ARC700 doesn't cache any access in top 1G (0xc000_0000 to 0xFFFF_FFFF)
+ * Ideal for wiring memory mapped peripherals as we don't need to do
+ * explicit uncached accesses (LD.di/ST.di) hence more portable drivers
+ */
+#define ARC_UNCACHED_ADDR_SPACE	0xc0000000
+
+#ifndef __ASSEMBLY__
+
+#include <linux/build_bug.h>
+
+/* Uncached access macros */
+#define arc_read_uncached_32(ptr)	\
+({					\
+	unsigned int __ret;		\
+	__asm__ __volatile__(		\
+	"	ld.di %0, [%1]	\n"	\
+	: "=r"(__ret)			\
+	: "r"(ptr));			\
+	__ret;				\
+})
+
+#define arc_write_uncached_32(ptr, data)\
+({					\
+	__asm__ __volatile__(		\
+	"	st.di %0, [%1]	\n"	\
+	:				\
+	: "r"(data), "r"(ptr));		\
+})
+
+/* Largest line length for either L1 or L2 is 128 bytes */
+#define SMP_CACHE_BYTES		128
+#define cache_line_size()	SMP_CACHE_BYTES
+#define ARCH_DMA_MINALIGN	SMP_CACHE_BYTES
+
+/*
+ * Make sure slab-allocated buffers are 64-bit aligned when atomic64_t uses
+ * ARCv2 64-bit atomics (LLOCKD/SCONDD). This guarantess runtime 64-bit
+ * alignment for any atomic64_t embedded in buffer.
+ * Default ARCH_SLAB_MINALIGN is __alignof__(long long) which has a relaxed
+ * value of 4 (and not 8) in ARC ABI.
+ */
+#if defined(CONFIG_ARC_HAS_LL64) && defined(CONFIG_ARC_HAS_LLSC)
+#define ARCH_SLAB_MINALIGN	8
+#endif
+
+extern int ioc_enable;
+extern unsigned long perip_base, perip_end;
+
+#endif	/* !__ASSEMBLY__ */
+
+/* Instruction cache related Auxiliary registers */
+#define ARC_REG_IC_BCR		0x77	/* Build Config reg */
+#define ARC_REG_IC_IVIC		0x10
+#define ARC_REG_IC_CTRL		0x11
+#define ARC_REG_IC_IVIR		0x16
+#define ARC_REG_IC_ENDR		0x17
+#define ARC_REG_IC_IVIL		0x19
+#define ARC_REG_IC_PTAG		0x1E
+#define ARC_REG_IC_PTAG_HI	0x1F
+
+/* Bit val in IC_CTRL */
+#define IC_CTRL_DIS		0x1
+
+/* Data cache related Auxiliary registers */
+#define ARC_REG_DC_BCR		0x72	/* Build Config reg */
+#define ARC_REG_DC_IVDC		0x47
+#define ARC_REG_DC_CTRL		0x48
+#define ARC_REG_DC_IVDL		0x4A
+#define ARC_REG_DC_FLSH		0x4B
+#define ARC_REG_DC_FLDL		0x4C
+#define ARC_REG_DC_STARTR	0x4D
+#define ARC_REG_DC_ENDR		0x4E
+#define ARC_REG_DC_PTAG		0x5C
+#define ARC_REG_DC_PTAG_HI	0x5F
+
+/* Bit val in DC_CTRL */
+#define DC_CTRL_DIS		0x001
+#define DC_CTRL_INV_MODE_FLUSH	0x040
+#define DC_CTRL_FLUSH_STATUS	0x100
+#define DC_CTRL_RGN_OP_INV	0x200
+#define DC_CTRL_RGN_OP_MSK	0x200
+
+/*System-level cache (L2 cache) related Auxiliary registers */
+#define ARC_REG_SLC_CFG		0x901
+#define ARC_REG_SLC_CTRL	0x903
+#define ARC_REG_SLC_FLUSH	0x904
+#define ARC_REG_SLC_INVALIDATE	0x905
+#define ARC_AUX_SLC_IVDL	0x910
+#define ARC_AUX_SLC_FLDL	0x912
+#define ARC_REG_SLC_RGN_START	0x914
+#define ARC_REG_SLC_RGN_START1	0x915
+#define ARC_REG_SLC_RGN_END	0x916
+#define ARC_REG_SLC_RGN_END1	0x917
+
+/* Bit val in SLC_CONTROL */
+#define SLC_CTRL_DIS		0x001
+#define SLC_CTRL_IM		0x040
+#define SLC_CTRL_BUSY		0x100
+#define SLC_CTRL_RGN_OP_INV	0x200
+
+/* IO coherency related Auxiliary registers */
+#define ARC_REG_IO_COH_ENABLE	0x500
+#define ARC_IO_COH_ENABLE_BIT	BIT(0)
+#define ARC_REG_IO_COH_PARTIAL	0x501
+#define ARC_IO_COH_PARTIAL_BIT	BIT(0)
+#define ARC_REG_IO_COH_AP0_BASE	0x508
+#define ARC_REG_IO_COH_AP0_SIZE	0x509
+
+#endif /* _ASM_CACHE_H */
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
new file mode 100644
index 000000000..e201b4b16
--- /dev/null
+++ b/arch/arc/include/asm/cacheflush.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ *  vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs
+ *   -flush_cache_dup_mm (fork)
+ *   -likewise for flush_cache_mm (exit/execve)
+ *   -likewise for flush_cache_{range,page} (munmap, exit, COW-break)
+ *
+ *  vineetg: April 2008
+ *   -Added a critical CacheLine flush to copy_to_user_page( ) which
+ *     was causing gdbserver to not setup breakpoints consistently
+ */
+
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/shmparam.h>
+
+/*
+ * Semantically we need this because icache doesn't snoop dcache/dma.
+ * However ARC Cache flush requires paddr as well as vaddr, latter not available
+ * in the flush_icache_page() API. So we no-op it but do the equivalent work
+ * in update_mmu_cache()
+ */
+#define flush_icache_page(vma, page)
+
+void flush_cache_all(void);
+
+void flush_icache_range(unsigned long kstart, unsigned long kend);
+void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len);
+void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr);
+void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr);
+
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+
+void flush_dcache_page(struct page *page);
+
+void dma_cache_wback_inv(phys_addr_t start, unsigned long sz);
+void dma_cache_inv(phys_addr_t start, unsigned long sz);
+void dma_cache_wback(phys_addr_t start, unsigned long sz);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+/* TBD: optimize this */
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
+
+#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
+
+#define flush_cache_mm(mm)			/* called on munmap/exit */
+#define flush_cache_range(mm, u_vstart, u_vend)
+#define flush_cache_page(vma, u_vaddr, pfn)	/* PF handling/COW-break */
+
+#else	/* VIPT aliasing dcache */
+
+/* To clear out stale userspace mappings */
+void flush_cache_mm(struct mm_struct *mm);
+void flush_cache_range(struct vm_area_struct *vma,
+	unsigned long start,unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma,
+	unsigned long user_addr, unsigned long page);
+
+/*
+ * To make sure that userspace mapping is flushed to memory before
+ * get_user_pages() uses a kernel mapping to access the page
+ */
+#define ARCH_HAS_FLUSH_ANON_PAGE
+void flush_anon_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long u_vaddr);
+
+#endif	/* CONFIG_ARC_CACHE_VIPT_ALIASING */
+
+/*
+ * A new pagecache page has PG_arch_1 clear - thus dcache dirty by default
+ * This works around some PIO based drivers which don't call flush_dcache_page
+ * to record that they dirtied the dcache
+ */
+#define PG_dc_clean	PG_arch_1
+
+#define CACHE_COLORS_NUM	4
+#define CACHE_COLORS_MSK	(CACHE_COLORS_NUM - 1)
+#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & CACHE_COLORS_MSK)
+
+/*
+ * Simple wrapper over config option
+ * Bootup code ensures that hardware matches kernel configuration
+ */
+static inline int cache_is_vipt_aliasing(void)
+{
+	return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
+}
+
+/*
+ * checks if two addresses (after page aligning) index into same cache set
+ */
+#define addr_not_cache_congruent(addr1, addr2)				\
+({									\
+	cache_is_vipt_aliasing() ? 					\
+		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0;		\
+})
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+do {									\
+	memcpy(dst, src, len);						\
+	if (vma->vm_flags & VM_EXEC)					\
+		__sync_icache_dcache((unsigned long)(dst), vaddr, len);	\
+} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)		\
+	memcpy(dst, src, len);						\
+
+#endif
diff --git a/arch/arc/include/asm/checksum.h b/arch/arc/include/asm/checksum.h
new file mode 100644
index 000000000..0b485800a
--- /dev/null
+++ b/arch/arc/include/asm/checksum.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Joern Rennecke  <joern.rennecke@embecosm.com>: Jan 2012
+ *  -Insn Scheduling improvements to csum core routines.
+ *      = csum_fold( ) largely derived from ARM version.
+ *      = ip_fast_cum( ) to have module scheduling
+ *  -gcc 4.4.x broke networking. Alias analysis needed to be primed.
+ *   worked around by adding memory clobber to ip_fast_csum( )
+ *
+ * vineetg: May 2010
+ *  -Rewrote ip_fast_cscum( ) and csum_fold( ) with fast inline asm
+ */
+
+#ifndef _ASM_ARC_CHECKSUM_H
+#define _ASM_ARC_CHECKSUM_H
+
+/*
+ *	Fold a partial checksum
+ *
+ *  The 2 swords comprising the 32bit sum are added, any carry to 16th bit
+ *  added back and final sword result inverted.
+ */
+static inline __sum16 csum_fold(__wsum s)
+{
+	unsigned int r = s << 16 | s >> 16;	/* ror */
+	s = ~s;
+	s -= r;
+	return s >> 16;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline __sum16
+ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	const void *ptr = iph;
+	unsigned int tmp, tmp2, sum;
+
+	__asm__(
+	"	ld.ab  %0, [%3, 4]		\n"
+	"	ld.ab  %2, [%3, 4]		\n"
+	"	sub    %1, %4, 2		\n"
+	"	lsr.f  lp_count, %1, 1		\n"
+	"	bcc    0f			\n"
+	"	add.f  %0, %0, %2		\n"
+	"	ld.ab  %2, [%3, 4]		\n"
+	"0:	lp     1f			\n"
+	"	ld.ab  %1, [%3, 4]		\n"
+	"	adc.f  %0, %0, %2		\n"
+	"	ld.ab  %2, [%3, 4]		\n"
+	"	adc.f  %0, %0, %1		\n"
+	"1:	adc.f  %0, %0, %2		\n"
+	"	add.cs %0,%0,1			\n"
+	: "=&r"(sum), "=r"(tmp), "=&r"(tmp2), "+&r" (ptr)
+	: "r"(ihl)
+	: "cc", "lp_count", "memory");
+
+	return csum_fold(sum);
+}
+
+/*
+ * TCP pseudo Header is 12 bytes:
+ * SA [4], DA [4], zeroes [1], Proto[1], TCP Seg(hdr+data) Len [2]
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
+{
+	__asm__ __volatile__(
+	"	add.f %0, %0, %1	\n"
+	"	adc.f %0, %0, %2	\n"
+	"	adc.f %0, %0, %3	\n"
+	"	adc.f %0, %0, %4	\n"
+	"	adc   %0, %0, 0		\n"
+	: "+&r"(sum)
+	: "r"(saddr), "r"(daddr),
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	  "r"(len),
+#else
+	  "r"(len << 8),
+#endif
+	  "r"(htons(proto))
+	: "cc");
+
+	return sum;
+}
+
+#define csum_fold csum_fold
+#define ip_fast_csum ip_fast_csum
+#define csum_tcpudp_nofold csum_tcpudp_nofold
+
+#include <asm-generic/checksum.h>
+
+#endif /* _ASM_ARC_CHECKSUM_H */
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
new file mode 100644
index 000000000..c5b544a5f
--- /dev/null
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_ARC_CMPXCHG_H
+#define __ASM_ARC_CMPXCHG_H
+
+#include <linux/build_bug.h>
+#include <linux/types.h>
+
+#include <asm/barrier.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_ARC_HAS_LLSC
+
+/*
+ * if (*ptr == @old)
+ *      *ptr = @new
+ */
+#define __cmpxchg(ptr, old, new)					\
+({									\
+	__typeof__(*(ptr)) _prev;					\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock  %0, [%1]	\n"					\
+	"	brne   %0, %2, 2f	\n"				\
+	"	scond  %3, [%1]	\n"					\
+	"	bnz     1b		\n"				\
+	"2:				\n"				\
+	: "=&r"(_prev)	/* Early clobber prevent reg reuse */		\
+	: "r"(ptr),	/* Not "m": llock only supports reg */		\
+	  "ir"(old),							\
+	  "r"(new)	/* Not "ir": scond can't take LIMM */		\
+	: "cc",								\
+	  "memory");	/* gcc knows memory is clobbered */		\
+									\
+	_prev;								\
+})
+
+#define arch_cmpxchg_relaxed(ptr, old, new)				\
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _o_ = (old);					\
+	__typeof__(*(ptr)) _n_ = (new);					\
+	__typeof__(*(ptr)) _prev_;					\
+									\
+	switch(sizeof((_p_))) {						\
+	case 4:								\
+		_prev_ = __cmpxchg(_p_, _o_, _n_);			\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+	_prev_;								\
+})
+
+#else
+
+#define arch_cmpxchg(ptr, old, new)				        \
+({									\
+	volatile __typeof__(ptr) _p_ = (ptr);				\
+	__typeof__(*(ptr)) _o_ = (old);					\
+	__typeof__(*(ptr)) _n_ = (new);					\
+	__typeof__(*(ptr)) _prev_;					\
+	unsigned long __flags;						\
+									\
+	BUILD_BUG_ON(sizeof(_p_) != 4);					\
+									\
+	/*								\
+	 * spin lock/unlock provide the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(__flags);					\
+	_prev_ = *_p_;							\
+	if (_prev_ == _o_)						\
+		*_p_ = _n_;						\
+	atomic_ops_unlock(__flags);					\
+	_prev_;								\
+})
+
+#endif
+
+/*
+ * xchg
+ */
+#ifdef CONFIG_ARC_HAS_LLSC
+
+#define __xchg(ptr, val)						\
+({									\
+	__asm__ __volatile__(						\
+	"	ex  %0, [%1]	\n"	/* set new value */	        \
+	: "+r"(val)							\
+	: "r"(ptr)							\
+	: "memory");							\
+	_val_;		/* get old value */				\
+})
+
+#define arch_xchg_relaxed(ptr, val)					\
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _val_ = (val);				\
+									\
+	switch(sizeof(*(_p_))) {					\
+	case 4:								\
+		_val_ = __xchg(_p_, _val_);				\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+	_val_;								\
+})
+
+#else  /* !CONFIG_ARC_HAS_LLSC */
+
+/*
+ * EX instructions is baseline and present in !LLSC too. But in this
+ * regime it still needs use @atomic_ops_lock spinlock to allow interop
+ * with cmpxchg() which uses spinlock in !LLSC
+ * (llist.h use xchg and cmpxchg on sama data)
+ */
+
+#define arch_xchg(ptr, val)					        \
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _val_ = (val);				\
+									\
+	unsigned long __flags;						\
+									\
+	atomic_ops_lock(__flags);					\
+									\
+	__asm__ __volatile__(						\
+	"	ex  %0, [%1]	\n"					\
+	: "+r"(_val_)							\
+	: "r"(_p_)							\
+	: "memory");							\
+									\
+	atomic_ops_unlock(__flags);					\
+	_val_;								\
+})
+
+#endif
+
+#endif
diff --git a/arch/arc/include/asm/current.h b/arch/arc/include/asm/current.h
new file mode 100644
index 000000000..9b9bdd3e6
--- /dev/null
+++ b/arch/arc/include/asm/current.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Vineetg: May 16th, 2008
+ *  - Current macro is now implemented as "global register" r25
+ */
+
+#ifndef _ASM_ARC_CURRENT_H
+#define _ASM_ARC_CURRENT_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+
+register struct task_struct *curr_arc asm("r25");
+#define current (curr_arc)
+
+#else
+#include <asm-generic/current.h>
+#endif /* ! CONFIG_ARC_CURR_IN_REG */
+
+#endif /* ! __ASSEMBLY__ */
+
+#endif /* _ASM_ARC_CURRENT_H */
diff --git a/arch/arc/include/asm/delay.h b/arch/arc/include/asm/delay.h
new file mode 100644
index 000000000..54db798f0
--- /dev/null
+++ b/arch/arc/include/asm/delay.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Delay routines using pre computed loops_per_jiffy value.
+ *
+ * vineetg: Feb 2012
+ *  -Rewrote in "C" to avoid dealing with availability of H/w MPY
+ *  -Also reduced the num of MPY operations from 3 to 2
+ *
+ * Amit Bhor: Codito Technologies 2004
+ */
+
+#ifndef __ASM_ARC_UDELAY_H
+#define __ASM_ARC_UDELAY_H
+
+#include <asm-generic/types.h>
+#include <asm/param.h>		/* HZ */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void __delay(unsigned long loops)
+{
+	__asm__ __volatile__(
+	"	mov lp_count, %0	\n"
+	"	lp  1f			\n"
+	"	nop			\n"
+	"1:				\n"
+	:
+        : "r"(loops)
+        : "lp_count");
+}
+
+extern void __bad_udelay(void);
+
+/*
+ * Normal Math for computing loops in "N" usecs
+ *  -we have precomputed @loops_per_jiffy
+ *  -1 sec has HZ jiffies
+ * loops per "N" usecs = ((loops_per_jiffy * HZ / 1000000) * N)
+ *
+ * Approximate Division by multiplication:
+ *  -Mathematically if we multiply and divide a number by same value the
+ *   result remains unchanged:  In this case, we use 2^32
+ *  -> (loops_per_N_usec * 2^32 ) / 2^32
+ *  -> (((loops_per_jiffy * HZ / 1000000) * N) * 2^32) / 2^32
+ *  -> (loops_per_jiffy * HZ * N * 4295) / 2^32
+ *
+ *  -Divide by 2^32 is very simply right shift by 32
+ *  -We simply need to ensure that the multiply per above eqn happens in
+ *   64-bit precision (if CPU doesn't support it - gcc can emaulate it)
+ */
+
+static inline void __udelay(unsigned long usecs)
+{
+	unsigned long loops;
+
+	/* (u64) cast ensures 64 bit MPY - real or emulated
+	 * HZ * 4295 is pre-evaluated by gcc - hence only 2 mpy ops
+	 */
+	loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
+
+	__delay(loops);
+}
+
+#define udelay(n) (__builtin_constant_p(n) ? ((n) > 20000 ? __bad_udelay() \
+				: __udelay(n)) : __udelay(n))
+
+#endif /* __ASM_ARC_UDELAY_H */
diff --git a/arch/arc/include/asm/disasm.h b/arch/arc/include/asm/disasm.h
new file mode 100644
index 000000000..61fb4d7af
--- /dev/null
+++ b/arch/arc/include/asm/disasm.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * several functions that help interpret ARC instructions
+ * used for unaligned accesses, kprobes and kgdb
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ARC_DISASM_H__
+#define __ARC_DISASM_H__
+
+enum {
+	op_Bcc = 0, op_BLcc = 1, op_LD = 2, op_ST = 3, op_MAJOR_4 = 4,
+	op_MAJOR_5 = 5, op_LD_ADD = 12, op_ADD_SUB_SHIFT = 13,
+	op_ADD_MOV_CMP = 14, op_S = 15, op_LD_S = 16, op_LDB_S = 17,
+	op_LDW_S = 18, op_LDWX_S = 19, op_ST_S = 20, op_STB_S = 21,
+	op_STW_S = 22, op_Su5 = 23, op_SP = 24, op_GP = 25,
+	op_Pcl = 26, op_MOV_S = 27, op_ADD_CMP = 28, op_BR_S = 29,
+	op_B_S = 30, op_BL_S = 31
+};
+
+enum flow {
+	noflow,
+	direct_jump,
+	direct_call,
+	indirect_jump,
+	indirect_call,
+	invalid_instr
+};
+
+#define IS_BIT(word, n)		((word) & (1<<n))
+#define BITS(word, s, e)	(((word) >> (s)) & (~((-2) << ((e) - (s)))))
+
+#define MAJOR_OPCODE(word)	(BITS((word), 27, 31))
+#define MINOR_OPCODE(word)	(BITS((word), 16, 21))
+#define FIELD_A(word)		(BITS((word), 0, 5))
+#define FIELD_B(word)		((BITS((word), 12, 14)<<3) | \
+				(BITS((word), 24, 26)))
+#define FIELD_C(word)		(BITS((word), 6, 11))
+#define FIELD_u6(word)		FIELDC(word)
+#define FIELD_s12(word)		sign_extend(((BITS((word), 0, 5) << 6) | \
+					BITS((word), 6, 11)), 12)
+
+/* note that for BL/BRcc these two macro's need another AND statement to mask
+ * out bit 1 (make the result a multiple of 4) */
+#define FIELD_s9(word)		sign_extend(((BITS(word, 15, 15) << 8) | \
+					BITS(word, 16, 23)), 9)
+#define FIELD_s21(word)		sign_extend(((BITS(word, 6, 15) << 11) | \
+					(BITS(word, 17, 26) << 1)), 12)
+#define FIELD_s25(word)		sign_extend(((BITS(word, 0, 3) << 21) | \
+					(BITS(word, 6, 15) << 11) | \
+					(BITS(word, 17, 26) << 1)), 12)
+
+/* note: these operate on 16 bits! */
+#define FIELD_S_A(word)		((BITS((word), 2, 2)<<3) | BITS((word), 0, 2))
+#define FIELD_S_B(word)		((BITS((word), 10, 10)<<3) | \
+				BITS((word), 8, 10))
+#define FIELD_S_C(word)		((BITS((word), 7, 7)<<3) | BITS((word), 5, 7))
+#define FIELD_S_H(word)		((BITS((word), 0, 2)<<3) | BITS((word), 5, 8))
+#define FIELD_S_u5(word)	(BITS((word), 0, 4))
+#define FIELD_S_u6(word)	(BITS((word), 0, 4) << 1)
+#define FIELD_S_u7(word)	(BITS((word), 0, 4) << 2)
+#define FIELD_S_u10(word)	(BITS((word), 0, 7) << 2)
+#define FIELD_S_s7(word)	sign_extend(BITS((word), 0, 5) << 1, 9)
+#define FIELD_S_s8(word)	sign_extend(BITS((word), 0, 7) << 1, 9)
+#define FIELD_S_s9(word)	sign_extend(BITS((word), 0, 8), 9)
+#define FIELD_S_s10(word)	sign_extend(BITS((word), 0, 8) << 1, 10)
+#define FIELD_S_s11(word)	sign_extend(BITS((word), 0, 8) << 2, 11)
+#define FIELD_S_s13(word)	sign_extend(BITS((word), 0, 10) << 2, 13)
+
+#define STATUS32_L		0x00000100
+#define REG_LIMM		62
+
+struct disasm_state {
+	/* generic info */
+	unsigned long words[2];
+	int instr_len;
+	int major_opcode;
+	/* info for branch/jump */
+	int is_branch;
+	int target;
+	int delay_slot;
+	enum flow flow;
+	/* info for load/store */
+	int src1, src2, src3, dest, wb_reg;
+	int zz, aa, x, pref, di;
+	int fault, write;
+};
+
+static inline int sign_extend(int value, int bits)
+{
+	if (IS_BIT(value, (bits - 1)))
+		value |= (0xffffffff << bits);
+
+	return value;
+}
+
+static inline int is_short_instr(unsigned long addr)
+{
+	uint16_t word = *((uint16_t *)addr);
+	int opcode = (word >> 11) & 0x1F;
+	return (opcode >= 0x0B);
+}
+
+void disasm_instr(unsigned long addr, struct disasm_state *state,
+	int userspace, struct pt_regs *regs, struct callee_regs *cregs);
+int disasm_next_pc(unsigned long pc, struct pt_regs *regs, struct callee_regs
+	*cregs, unsigned long *fall_thru, unsigned long *target);
+long get_reg(int reg, struct pt_regs *regs, struct callee_regs *cregs);
+void set_reg(int reg, long val, struct pt_regs *regs,
+		struct callee_regs *cregs);
+
+#endif	/* __ARC_DISASM_H__ */
diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h
new file mode 100644
index 000000000..02431027e
--- /dev/null
+++ b/arch/arc/include/asm/dma.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef ASM_ARC_DMA_H
+#define ASM_ARC_DMA_H
+
+#define MAX_DMA_ADDRESS 0xC0000000
+
+#endif
diff --git a/arch/arc/include/asm/dsp-impl.h b/arch/arc/include/asm/dsp-impl.h
new file mode 100644
index 000000000..cd5636dfe
--- /dev/null
+++ b/arch/arc/include/asm/dsp-impl.h
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+#ifndef __ASM_ARC_DSP_IMPL_H
+#define __ASM_ARC_DSP_IMPL_H
+
+#include <asm/dsp.h>
+
+#define DSP_CTRL_DISABLED_ALL		0
+
+#ifdef __ASSEMBLY__
+
+/* clobbers r5 register */
+.macro DSP_EARLY_INIT
+#ifdef CONFIG_ISA_ARCV2
+	lr	r5, [ARC_AUX_DSP_BUILD]
+	bmsk	r5, r5, 7
+	breq    r5, 0, 1f
+	mov	r5, DSP_CTRL_DISABLED_ALL
+	sr	r5, [ARC_AUX_DSP_CTRL]
+1:
+#endif
+.endm
+
+/* clobbers r10, r11 registers pair */
+.macro DSP_SAVE_REGFILE_IRQ
+#if defined(CONFIG_ARC_DSP_KERNEL)
+	/*
+	 * Drop any changes to DSP_CTRL made by userspace so userspace won't be
+	 * able to break kernel - reset it to DSP_CTRL_DISABLED_ALL value
+	 */
+	mov	r10, DSP_CTRL_DISABLED_ALL
+	sr	r10, [ARC_AUX_DSP_CTRL]
+
+#elif defined(CONFIG_ARC_DSP_SAVE_RESTORE_REGS)
+	/*
+	 * Save DSP_CTRL register and reset it to value suitable for kernel
+	 * (DSP_CTRL_DISABLED_ALL)
+	 */
+	mov	r10, DSP_CTRL_DISABLED_ALL
+	aex	r10, [ARC_AUX_DSP_CTRL]
+	st	r10, [sp, PT_DSP_CTRL]
+
+#endif
+.endm
+
+/* clobbers r10, r11 registers pair */
+.macro DSP_RESTORE_REGFILE_IRQ
+#if defined(CONFIG_ARC_DSP_SAVE_RESTORE_REGS)
+	ld	r10, [sp, PT_DSP_CTRL]
+	sr	r10, [ARC_AUX_DSP_CTRL]
+
+#endif
+.endm
+
+#else /* __ASEMBLY__ */
+
+#include <linux/sched.h>
+#include <asm/asserts.h>
+#include <asm/switch_to.h>
+
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+
+/*
+ * As we save new and restore old AUX register value in the same place we
+ * can optimize a bit and use AEX instruction (swap contents of an auxiliary
+ * register with a core register) instead of LR + SR pair.
+ */
+#define AUX_SAVE_RESTORE(_saveto, _readfrom, _offt, _aux)		\
+do {									\
+	long unsigned int _scratch;					\
+									\
+	__asm__ __volatile__(						\
+		"ld	%0, [%2, %4]			\n"		\
+		"aex	%0, [%3]			\n"		\
+		"st	%0, [%1, %4]			\n"		\
+		:							\
+		  "=&r" (_scratch)	/* must be early clobber */	\
+		:							\
+		   "r" (_saveto),					\
+		   "r" (_readfrom),					\
+		   "Ir" (_aux),						\
+		   "Ir" (_offt)						\
+		:							\
+		  "memory"						\
+	);								\
+} while (0)
+
+#define DSP_AUX_SAVE_RESTORE(_saveto, _readfrom, _aux)			\
+	AUX_SAVE_RESTORE(_saveto, _readfrom,				\
+		offsetof(struct dsp_callee_regs, _aux),			\
+		ARC_AUX_##_aux)
+
+static inline void dsp_save_restore(struct task_struct *prev,
+					struct task_struct *next)
+{
+	long unsigned int *saveto = &prev->thread.dsp.ACC0_GLO;
+	long unsigned int *readfrom = &next->thread.dsp.ACC0_GLO;
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, ACC0_GLO);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, ACC0_GHI);
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, DSP_BFLY0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, DSP_FFT_CTRL);
+
+#ifdef CONFIG_ARC_DSP_AGU_USERSPACE
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP1);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP2);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP3);
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_OS0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_OS1);
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD1);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD2);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD3);
+#endif /* CONFIG_ARC_DSP_AGU_USERSPACE */
+}
+
+#else /* !CONFIG_ARC_DSP_SAVE_RESTORE_REGS */
+#define dsp_save_restore(p, n)
+#endif /* CONFIG_ARC_DSP_SAVE_RESTORE_REGS */
+
+static inline bool dsp_exist(void)
+{
+	struct bcr_generic bcr;
+
+	READ_BCR(ARC_AUX_DSP_BUILD, bcr);
+	return !!bcr.ver;
+}
+
+static inline bool agu_exist(void)
+{
+	struct bcr_generic bcr;
+
+	READ_BCR(ARC_AUX_AGU_BUILD, bcr);
+	return !!bcr.ver;
+}
+
+static inline void dsp_config_check(void)
+{
+	CHK_OPT_STRICT(CONFIG_ARC_DSP_HANDLED, dsp_exist());
+	CHK_OPT_WEAK(CONFIG_ARC_DSP_AGU_USERSPACE, agu_exist());
+}
+
+#endif /* __ASEMBLY__ */
+#endif /* __ASM_ARC_DSP_IMPL_H */
diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h
new file mode 100644
index 000000000..202c78e56
--- /dev/null
+++ b/arch/arc/include/asm/dsp.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+#ifndef __ASM_ARC_DSP_H
+#define __ASM_ARC_DSP_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * DSP-related saved registers - need to be saved only when you are
+ * scheduled out.
+ * structure fields name must correspond to aux register defenitions for
+ * automatic offset calculation in DSP_AUX_SAVE_RESTORE macros
+ */
+struct dsp_callee_regs {
+	unsigned long ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_FFT_CTRL;
+#ifdef CONFIG_ARC_DSP_AGU_USERSPACE
+	unsigned long AGU_AP0, AGU_AP1, AGU_AP2, AGU_AP3;
+	unsigned long AGU_OS0, AGU_OS1;
+	unsigned long AGU_MOD0, AGU_MOD1, AGU_MOD2, AGU_MOD3;
+#endif
+};
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_ARC_DSP_H */
diff --git a/arch/arc/include/asm/dwarf.h b/arch/arc/include/asm/dwarf.h
new file mode 100644
index 000000000..5f4de05bd
--- /dev/null
+++ b/arch/arc/include/asm/dwarf.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016-17 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_DWARF_H
+#define _ASM_ARC_DWARF_H
+
+#ifdef __ASSEMBLY__
+
+#ifdef ARC_DW2_UNWIND_AS_CFI
+
+#define CFI_STARTPROC	.cfi_startproc
+#define CFI_ENDPROC	.cfi_endproc
+#define CFI_DEF_CFA	.cfi_def_cfa
+#define CFI_REGISTER	.cfi_register
+#define CFI_REL_OFFSET	.cfi_rel_offset
+#define CFI_UNDEFINED	.cfi_undefined
+
+#else
+
+#define CFI_IGNORE	#
+
+#define CFI_STARTPROC	CFI_IGNORE
+#define CFI_ENDPROC	CFI_IGNORE
+#define CFI_DEF_CFA	CFI_IGNORE
+#define CFI_REGISTER	CFI_IGNORE
+#define CFI_REL_OFFSET	CFI_IGNORE
+#define CFI_UNDEFINED	CFI_IGNORE
+
+#endif	/* !ARC_DW2_UNWIND_AS_CFI */
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_ARC_DWARF_H */
diff --git a/arch/arc/include/asm/elf.h b/arch/arc/include/asm/elf.h
new file mode 100644
index 000000000..0284ace0e
--- /dev/null
+++ b/arch/arc/include/asm/elf.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_ARC_ELF_H
+#define __ASM_ARC_ELF_H
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+#include <uapi/asm/elf.h>
+
+#define EM_ARC_INUSE		(IS_ENABLED(CONFIG_ISA_ARCOMPACT) ? \
+					EM_ARCOMPACT : EM_ARCV2)
+
+/* ARC Relocations (kernel Modules only) */
+#define  R_ARC_32		0x4
+#define  R_ARC_32_ME		0x1B
+#define  R_ARC_32_PCREL		0x31
+
+/*to set parameters in the core dumps */
+#define ELF_ARCH		EM_ARC_INUSE
+#define ELF_CLASS		ELFCLASS32
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define ELF_DATA		ELFDATA2MSB
+#else
+#define ELF_DATA		ELFDATA2LSB
+#endif
+
+/*
+ * To ensure that
+ *  -we don't load something for the wrong architecture.
+ *  -The userspace is using the correct syscall ABI
+ */
+struct elf32_hdr;
+extern int elf_check_arch(const struct elf32_hdr *);
+#define elf_check_arch	elf_check_arch
+
+#define CORE_DUMP_USE_REGSET
+
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE		(2UL * TASK_SIZE / 3)
+
+/*
+ * When the program starts, a1 contains a pointer to a function to be
+ * registered with atexit, as per the SVR4 ABI.  A value of 0 means we
+ * have no such handler.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	((_r)->r0 = 0)
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP	(0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
+#define ELF_PLATFORM	(NULL)
+
+#endif
diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
new file mode 100644
index 000000000..0ff4c0610
--- /dev/null
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -0,0 +1,284 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_ARC_ENTRY_ARCV2_H
+#define __ASM_ARC_ENTRY_ARCV2_H
+
+#include <asm/asm-offsets.h>
+#include <asm/dsp-impl.h>
+#include <asm/irqflags-arcv2.h>
+#include <asm/thread_info.h>	/* For THREAD_SIZE */
+
+/*
+ * Interrupt/Exception stack layout (pt_regs) for ARCv2
+ *   (End of struct aligned to end of page [unless nested])
+ *
+ *  INTERRUPT                          EXCEPTION
+ *
+ *    manual    ---------------------  manual
+ *              |      orig_r0      |
+ *              |      event/ECR    |
+ *              |      bta          |
+ *              |      user_r25     |
+ *              |      gp           |
+ *              |      fp           |
+ *              |      sp           |
+ *              |      r12          |
+ *              |      r30          |
+ *              |      r58          |
+ *              |      r59          |
+ *  hw autosave ---------------------
+ *    optional  |      r0           |
+ *              |      r1           |
+ *              ~                   ~
+ *              |      r9           |
+ *              |      r10          |
+ *              |      r11          |
+ *              |      blink        |
+ *              |      lpe          |
+ *              |      lps          |
+ *              |      lpc          |
+ *              |      ei base      |
+ *              |      ldi base     |
+ *              |      jli base     |
+ *              ---------------------
+ *  hw autosave |       pc / eret   |
+ *   mandatory  | stat32 / erstatus |
+ *              ---------------------
+ */
+
+/*------------------------------------------------------------------------*/
+.macro INTERRUPT_PROLOGUE
+
+	; (A) Before jumping to Interrupt Vector, hardware micro-ops did following:
+	;   1. SP auto-switched to kernel mode stack
+	;   2. STATUS32.Z flag set if in U mode at time of interrupt (U:1,K:0)
+	;   3. Auto save: (mandatory) Push PC and STAT32 on stack
+	;                 hardware does even if CONFIG_ARC_IRQ_NO_AUTOSAVE
+	;   4. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI
+	;
+	; (B) Manually saved some regs: r12,r25,r30, sp,fp,gp, ACCL pair
+
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+	; carve pt_regs on stack (case #3), PC/STAT32 already on stack
+	sub	sp, sp, SZ_PT_REGS - 8
+
+	__SAVE_REGFILE_HARD
+#else
+	; carve pt_regs on stack (case #4), which grew partially already
+	sub	sp, sp, PT_r0
+#endif
+
+	__SAVE_REGFILE_SOFT
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro EXCEPTION_PROLOGUE
+
+	; (A) Before jumping to Exception Vector, hardware micro-ops did following:
+	;   1. SP auto-switched to kernel mode stack
+	;   2. STATUS32.Z flag set if in U mode at time of exception (U:1,K:0)
+	;
+	; (B) Manually save the complete reg file below
+
+	sub	sp, sp, SZ_PT_REGS	; carve pt_regs
+
+	; _HARD saves r10 clobbered by _SOFT as scratch hence comes first
+
+	__SAVE_REGFILE_HARD
+	__SAVE_REGFILE_SOFT
+
+	st	r0, [sp]	; orig_r0
+
+	lr	r10, [eret]
+	lr	r11, [erstatus]
+	ST2	r10, r11, PT_ret
+
+	lr	r10, [ecr]
+	lr	r11, [erbta]
+	ST2	r10, r11, PT_event
+
+	; OUTPUT: r10 has ECR expected by EV_Trap
+.endm
+
+/*------------------------------------------------------------------------
+ * This macro saves the registers manually which would normally be autosaved
+ * by hardware on taken interrupts. It is used by
+ *   - exception handlers (which don't have autosave)
+ *   - interrupt autosave disabled due to CONFIG_ARC_IRQ_NO_AUTOSAVE
+ */
+.macro __SAVE_REGFILE_HARD
+
+	ST2	r0,  r1,  PT_r0
+	ST2	r2,  r3,  PT_r2
+	ST2	r4,  r5,  PT_r4
+	ST2	r6,  r7,  PT_r6
+	ST2	r8,  r9,  PT_r8
+	ST2	r10, r11, PT_r10
+
+	st	blink, [sp, PT_blink]
+
+	lr	r10, [lp_end]
+	lr	r11, [lp_start]
+	ST2	r10, r11, PT_lpe
+
+	st	lp_count, [sp, PT_lpc]
+
+	; skip JLI, LDI, EI for now
+.endm
+
+/*------------------------------------------------------------------------
+ * This macros saves a bunch of other registers which can't be autosaved for
+ * various reasons:
+ *   - r12: the last caller saved scratch reg since hardware saves in pairs so r0-r11
+ *   - r30: free reg, used by gcc as scratch
+ *   - ACCL/ACCH pair when they exist
+ */
+.macro __SAVE_REGFILE_SOFT
+
+	ST2	gp, fp, PT_r26		; gp (r26), fp (r27)
+
+	st	r12, [sp, PT_sp + 4]
+	st	r30, [sp, PT_sp + 8]
+
+	; Saving pt_regs->sp correctly requires some extra work due to the way
+	; Auto stack switch works
+	;  - U mode: retrieve it from AUX_USER_SP
+	;  - K mode: add the offset from current SP where H/w starts auto push
+	;
+	; 1. Utilize the fact that Z bit is set if Intr taken in U mode
+	; 2. Upon entry SP is always saved (for any inspection, unwinding etc),
+	;    but on return, restored only if U mode
+
+	lr	r10, [AUX_USER_SP]	; U mode SP
+
+	; ISA requires ADD.nz to have same dest and src reg operands
+	mov.nz	r10, sp
+	add.nz	r10, r10, SZ_PT_REGS	; K mode SP
+
+	st	r10, [sp, PT_sp]	; SP (pt_regs->sp)
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	st	r25, [sp, PT_user_r25]
+	GET_CURR_TASK_ON_CPU	r25
+#endif
+
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	ST2	r58, r59, PT_r58
+#endif
+
+	/* clobbers r10, r11 registers pair */
+	DSP_SAVE_REGFILE_IRQ
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro __RESTORE_REGFILE_SOFT
+
+	LD2	gp, fp, PT_r26		; gp (r26), fp (r27)
+
+	ld	r12, [sp, PT_r12]
+	ld	r30, [sp, PT_r30]
+
+	; Restore SP (into AUX_USER_SP) only if returning to U mode
+	;  - for K mode, it will be implicitly restored as stack is unwound
+	;  - Z flag set on K is inverse of what hardware does on interrupt entry
+	;    but that doesn't really matter
+	bz	1f
+
+	ld	r10, [sp, PT_sp]	; SP (pt_regs->sp)
+	sr	r10, [AUX_USER_SP]
+1:
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	ld	r25, [sp, PT_user_r25]
+#endif
+
+	/* clobbers r10, r11 registers pair */
+	DSP_RESTORE_REGFILE_IRQ
+
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	LD2	r58, r59, PT_r58
+#endif
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro __RESTORE_REGFILE_HARD
+
+	ld	blink, [sp, PT_blink]
+
+	LD2	r10, r11, PT_lpe
+	sr	r10, [lp_end]
+	sr	r11, [lp_start]
+
+	ld	r10, [sp, PT_lpc]	; lp_count can't be target of LD
+	mov	lp_count, r10
+
+	LD2	r0,  r1,  PT_r0
+	LD2	r2,  r3,  PT_r2
+	LD2	r4,  r5,  PT_r4
+	LD2	r6,  r7,  PT_r6
+	LD2	r8,  r9,  PT_r8
+	LD2	r10, r11, PT_r10
+.endm
+
+
+/*------------------------------------------------------------------------*/
+.macro INTERRUPT_EPILOGUE
+
+	; INPUT: r0 has STAT32 of calling context
+	; INPUT: Z flag set if returning to K mode
+
+	; _SOFT clobbers r10 restored by _HARD hence the order
+
+	__RESTORE_REGFILE_SOFT
+
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+	__RESTORE_REGFILE_HARD
+
+	; SP points to PC/STAT32: hw restores them despite NO_AUTOSAVE
+	add	sp, sp, SZ_PT_REGS - 8
+#else
+	add	sp, sp, PT_r0
+#endif
+
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro EXCEPTION_EPILOGUE
+
+	; INPUT: r0 has STAT32 of calling context
+
+	btst	r0, STATUS_U_BIT	; Z flag set if K, used in restoring SP
+
+	ld	r10, [sp, PT_event + 4]
+	sr	r10, [erbta]
+
+	LD2	r10, r11, PT_ret
+	sr	r10, [eret]
+	sr	r11, [erstatus]
+
+	__RESTORE_REGFILE_SOFT
+	__RESTORE_REGFILE_HARD
+
+	add	sp, sp, SZ_PT_REGS
+.endm
+
+.macro FAKE_RET_FROM_EXCPN
+	lr      r9, [status32]
+	bic     r9, r9, STATUS_AE_MASK
+	or      r9, r9, STATUS_IE_MASK
+	kflag   r9
+.endm
+
+/* Get thread_info of "current" tsk */
+.macro GET_CURR_THR_INFO_FROM_SP  reg
+	bmskn \reg, sp, THREAD_SHIFT - 1
+.endm
+
+/* Get CPU-ID of this core */
+.macro  GET_CPU_ID  reg
+	lr  \reg, [identity]
+	xbfu \reg, \reg, 0xE8	/* 00111    01000 */
+				/* M = 8-1  N = 8 */
+.endm
+
+#endif
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
new file mode 100644
index 000000000..67ff06e15
--- /dev/null
+++ b/arch/arc/include/asm/entry-compact.h
@@ -0,0 +1,304 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Vineetg: March 2009 (Supporting 2 levels of Interrupts)
+ *  Stack switching code can no longer reliably rely on the fact that
+ *  if we are NOT in user mode, stack is switched to kernel mode.
+ *  e.g. L2 IRQ interrupted a L1 ISR which had not yet completed
+ *  it's prologue including stack switching from user mode
+ *
+ * Vineetg: Aug 28th 2008: Bug #94984
+ *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
+ *   Normally CPU does this automatically, however when doing FAKE rtie,
+ *   we also need to explicitly do this. The problem in macros
+ *   FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
+ *   was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context
+ *
+ * Vineetg: May 5th 2008
+ *  -Modified CALLEE_REG save/restore macros to handle the fact that
+ *      r25 contains the kernel current task ptr
+ *  - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
+ *  - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
+ *      address Write back load ld.ab instead of separate ld/add instn
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef __ASM_ARC_ENTRY_COMPACT_H
+#define __ASM_ARC_ENTRY_COMPACT_H
+
+#include <asm/asm-offsets.h>
+#include <asm/irqflags-compact.h>
+#include <asm/thread_info.h>	/* For THREAD_SIZE */
+
+/*--------------------------------------------------------------
+ * Switch to Kernel Mode stack if SP points to User Mode stack
+ *
+ * Entry   : r9 contains pre-IRQ/exception/trap status32
+ * Exit    : SP set to K mode stack
+ *           SP at the time of entry (K/U) saved @ pt_regs->sp
+ * Clobbers: r9
+ *-------------------------------------------------------------*/
+
+.macro SWITCH_TO_KERNEL_STK
+
+	/* User Mode when this happened ? Yes: Proceed to switch stack */
+	bbit1   r9, STATUS_U_BIT, 88f
+
+	/* OK we were already in kernel mode when this event happened, thus can
+	 * assume SP is kernel mode SP. _NO_ need to do any stack switching
+	 */
+
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+	/* However....
+	 * If Level 2 Interrupts enabled, we may end up with a corner case:
+	 * 1. User Task executing
+	 * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)
+	 * 3. But before it could switch SP from USER to KERNEL stack
+	 *      a L2 IRQ "Interrupts" L1
+	 * Thay way although L2 IRQ happened in Kernel mode, stack is still
+	 * not switched.
+	 * To handle this, we may need to switch stack even if in kernel mode
+	 * provided SP has values in range of USER mode stack ( < 0x7000_0000 )
+	 */
+	brlo sp, VMALLOC_START, 88f
+
+	/* TODO: vineetg:
+	 * We need to be a bit more cautious here. What if a kernel bug in
+	 * L1 ISR, caused SP to go whaco (some small value which looks like
+	 * USER stk) and then we take L2 ISR.
+	 * Above brlo alone would treat it as a valid L1-L2 scenario
+	 * instead of shouting around
+	 * The only feasible way is to make sure this L2 happened in
+	 * L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in
+	 * L1 ISR before it switches stack
+	 */
+
+#endif
+
+    /*------Intr/Ecxp happened in kernel mode, SP already setup ------ */
+	/* save it nevertheless @ pt_regs->sp for uniformity */
+
+	b.d	66f
+	st	sp, [sp, PT_sp - SZ_PT_REGS]
+
+88: /*------Intr/Ecxp happened in user mode, "switch" stack ------ */
+
+	GET_CURR_TASK_ON_CPU   r9
+
+	/* With current tsk in r9, get it's kernel mode stack base */
+	GET_TSK_STACK_BASE  r9, r9
+
+	/* save U mode SP @ pt_regs->sp */
+	st	sp, [r9, PT_sp - SZ_PT_REGS]
+
+	/* final SP switch */
+	mov	sp, r9
+66:
+.endm
+
+/*------------------------------------------------------------
+ * "FAKE" a rtie to return from CPU Exception context
+ * This is to re-enable Exceptions within exception
+ * Look at EV_ProtV to see how this is actually used
+ *-------------------------------------------------------------*/
+
+.macro FAKE_RET_FROM_EXCPN
+
+	lr	r9, [status32]
+	bclr	r9, r9, STATUS_AE_BIT
+	or	r9, r9, (STATUS_E1_MASK|STATUS_E2_MASK)
+	sr	r9, [erstatus]
+	mov	r9, 55f
+	sr	r9, [eret]
+	rtie
+55:
+.endm
+
+/*--------------------------------------------------------------
+ * For early Exception/ISR Prologue, a core reg is temporarily needed to
+ * code the rest of prolog (stack switching). This is done by stashing
+ * it to memory (non-SMP case) or SCRATCH0 Aux Reg (SMP).
+ *
+ * Before saving the full regfile - this reg is restored back, only
+ * to be saved again on kernel mode stack, as part of pt_regs.
+ *-------------------------------------------------------------*/
+.macro PROLOG_FREEUP_REG	reg, mem
+	st  \reg, [\mem]
+.endm
+
+.macro PROLOG_RESTORE_REG	reg, mem
+	ld  \reg, [\mem]
+.endm
+
+/*--------------------------------------------------------------
+ * Exception Entry prologue
+ * -Switches stack to K mode (if not already)
+ * -Saves the register file
+ *
+ * After this it is safe to call the "C" handlers
+ *-------------------------------------------------------------*/
+.macro EXCEPTION_PROLOGUE
+
+	/* Need at least 1 reg to code the early exception prologue */
+	PROLOG_FREEUP_REG r9, @ex_saved_reg1
+
+	/* U/K mode at time of exception (stack not switched if already K) */
+	lr  r9, [erstatus]
+
+	/* ARC700 doesn't provide auto-stack switching */
+	SWITCH_TO_KERNEL_STK
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/* Treat r25 as scratch reg (save on stack) and load with "current" */
+	PUSH    r25
+	GET_CURR_TASK_ON_CPU   r25
+#else
+	sub     sp, sp, 4
+#endif
+
+	st.a	r0, [sp, -8]    /* orig_r0 needed for syscall (skip ECR slot) */
+	sub	sp, sp, 4	/* skip pt_regs->sp, already saved above */
+
+	/* Restore r9 used to code the early prologue */
+	PROLOG_RESTORE_REG  r9, @ex_saved_reg1
+
+	/* now we are ready to save the regfile */
+	SAVE_R0_TO_R12
+	PUSH	gp
+	PUSH	fp
+	PUSH	blink
+	PUSHAX	eret
+	PUSHAX	erstatus
+	PUSH	lp_count
+	PUSHAX	lp_end
+	PUSHAX	lp_start
+	PUSHAX	erbta
+
+	lr	r10, [ecr]
+	st      r10, [sp, PT_event]    /* EV_Trap expects r10 to have ECR */
+.endm
+
+/*--------------------------------------------------------------
+ * Restore all registers used by system call or Exceptions
+ * SP should always be pointing to the next free stack element
+ * when entering this macro.
+ *
+ * NOTE:
+ *
+ * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
+ * for memory load operations. If used in that way interrupts are deffered
+ * by hardware and that is not good.
+ *-------------------------------------------------------------*/
+.macro EXCEPTION_EPILOGUE
+
+	POPAX	erbta
+	POPAX	lp_start
+	POPAX	lp_end
+
+	POP	r9
+	mov	lp_count, r9	;LD to lp_count is not allowed
+
+	POPAX	erstatus
+	POPAX	eret
+	POP	blink
+	POP	fp
+	POP	gp
+	RESTORE_R12_TO_R0
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	ld	r25, [sp, 12]
+#endif
+	ld  sp, [sp] /* restore original sp */
+	/* orig_r0, ECR, user_r25 skipped automatically */
+.endm
+
+/* Dummy ECR values for Interrupts */
+#define event_IRQ1		0x0031abcd
+#define event_IRQ2		0x0032abcd
+
+.macro INTERRUPT_PROLOGUE  LVL
+
+	/* free up r9 as scratchpad */
+	PROLOG_FREEUP_REG r9, @int\LVL\()_saved_reg
+
+	/* Which mode (user/kernel) was the system in when intr occurred */
+	lr  r9, [status32_l\LVL\()]
+
+	SWITCH_TO_KERNEL_STK
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/* Treat r25 as scratch reg (save on stack) and load with "current" */
+	PUSH    r25
+	GET_CURR_TASK_ON_CPU   r25
+#else
+	sub     sp, sp, 4
+#endif
+
+	PUSH	0x003\LVL\()abcd    /* Dummy ECR */
+	sub	sp, sp, 8	    /* skip orig_r0 (not needed)
+				       skip pt_regs->sp, already saved above */
+
+	/* Restore r9 used to code the early prologue */
+	PROLOG_RESTORE_REG  r9, @int\LVL\()_saved_reg
+
+	SAVE_R0_TO_R12
+	PUSH	gp
+	PUSH	fp
+	PUSH	blink
+	PUSH	ilink\LVL\()
+	PUSHAX	status32_l\LVL\()
+	PUSH	lp_count
+	PUSHAX	lp_end
+	PUSHAX	lp_start
+	PUSHAX	bta_l\LVL\()
+
+.endm
+
+/*--------------------------------------------------------------
+ * Restore all registers used by interrupt handlers.
+ *
+ * NOTE:
+ *
+ * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
+ * for memory load operations. If used in that way interrupts are deffered
+ * by hardware and that is not good.
+ *-------------------------------------------------------------*/
+.macro INTERRUPT_EPILOGUE  LVL
+
+	POPAX	bta_l\LVL\()
+	POPAX	lp_start
+	POPAX	lp_end
+
+	POP	r9
+	mov	lp_count, r9	;LD to lp_count is not allowed
+
+	POPAX	status32_l\LVL\()
+	POP	ilink\LVL\()
+	POP	blink
+	POP	fp
+	POP	gp
+	RESTORE_R12_TO_R0
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	ld	r25, [sp, 12]
+#endif
+	ld  sp, [sp] /* restore original sp */
+	/* orig_r0, ECR, user_r25 skipped automatically */
+.endm
+
+/* Get thread_info of "current" tsk */
+.macro GET_CURR_THR_INFO_FROM_SP  reg
+	bic \reg, sp, (THREAD_SIZE - 1)
+.endm
+
+/* Get CPU-ID of this core */
+.macro  GET_CPU_ID  reg
+	lr  \reg, [identity]
+	lsr \reg, \reg, 8
+	bmsk \reg, \reg, 7
+.endm
+
+#endif  /* __ASM_ARC_ENTRY_COMPACT_H */
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
new file mode 100644
index 000000000..fcdd59d77
--- /dev/null
+++ b/arch/arc/include/asm/entry.h
@@ -0,0 +1,298 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_ARC_ENTRY_H
+#define __ASM_ARC_ENTRY_H
+
+#include <asm/unistd.h>		/* For NR_syscalls defination */
+#include <asm/arcregs.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>	/* For VMALLOC_START */
+#include <asm/mmu.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+#include <asm/entry-compact.h>	/* ISA specific bits */
+#else
+#include <asm/entry-arcv2.h>
+#endif
+
+/* Note on the LD/ST addr modes with addr reg wback
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a    reg1, [reg2, x]  => Pre Incr
+ *      Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab   reg1, [reg2, x]  => Post Incr
+ *      Eff Addr for load = [reg2]
+ */
+
+.macro PUSH reg
+	st.a	\reg, [sp, -4]
+.endm
+
+.macro PUSHAX aux
+	lr	r9, [\aux]
+	PUSH	r9
+.endm
+
+.macro POP reg
+	ld.ab	\reg, [sp, 4]
+.endm
+
+.macro POPAX aux
+	POP	r9
+	sr	r9, [\aux]
+.endm
+
+/*--------------------------------------------------------------
+ * Helpers to save/restore Scratch Regs:
+ * used by Interrupt/Exception Prologue/Epilogue
+ *-------------------------------------------------------------*/
+.macro  SAVE_R0_TO_R12
+	PUSH	r0
+	PUSH	r1
+	PUSH	r2
+	PUSH	r3
+	PUSH	r4
+	PUSH	r5
+	PUSH	r6
+	PUSH	r7
+	PUSH	r8
+	PUSH	r9
+	PUSH	r10
+	PUSH	r11
+	PUSH	r12
+.endm
+
+.macro RESTORE_R12_TO_R0
+	POP	r12
+	POP	r11
+	POP	r10
+	POP	r9
+	POP	r8
+	POP	r7
+	POP	r6
+	POP	r5
+	POP	r4
+	POP	r3
+	POP	r2
+	POP	r1
+	POP	r0
+
+.endm
+
+/*--------------------------------------------------------------
+ * Helpers to save/restore callee-saved regs:
+ * used by several macros below
+ *-------------------------------------------------------------*/
+.macro SAVE_R13_TO_R24
+	PUSH	r13
+	PUSH	r14
+	PUSH	r15
+	PUSH	r16
+	PUSH	r17
+	PUSH	r18
+	PUSH	r19
+	PUSH	r20
+	PUSH	r21
+	PUSH	r22
+	PUSH	r23
+	PUSH	r24
+.endm
+
+.macro RESTORE_R24_TO_R13
+	POP	r24
+	POP	r23
+	POP	r22
+	POP	r21
+	POP	r20
+	POP	r19
+	POP	r18
+	POP	r17
+	POP	r16
+	POP	r15
+	POP	r14
+	POP	r13
+.endm
+
+/*--------------------------------------------------------------
+ * Collect User Mode callee regs as struct callee_regs - needed by
+ * fork/do_signal/unaligned-access-emulation.
+ * (By default only scratch regs are saved on entry to kernel)
+ *
+ * Special handling for r25 if used for caching Task Pointer.
+ * It would have been saved in task->thread.user_r25 already, but to keep
+ * the interface same it is copied into regular r25 placeholder in
+ * struct callee_regs.
+ *-------------------------------------------------------------*/
+.macro SAVE_CALLEE_SAVED_USER
+
+	mov	r12, sp		; save SP as ref to pt_regs
+	SAVE_R13_TO_R24
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	; Retrieve orig r25 and save it with rest of callee_regs
+	ld	r12, [r12, PT_user_r25]
+	PUSH	r12
+#else
+	PUSH	r25
+#endif
+
+.endm
+
+/*--------------------------------------------------------------
+ * Save kernel Mode callee regs at the time of Contect Switch.
+ *
+ * Special handling for r25 if used for caching Task Pointer.
+ * Kernel simply skips saving it since it will be loaded with
+ * incoming task pointer anyways
+ *-------------------------------------------------------------*/
+.macro SAVE_CALLEE_SAVED_KERNEL
+
+	SAVE_R13_TO_R24
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	sub     sp, sp, 4
+#else
+	PUSH	r25
+#endif
+.endm
+
+/*--------------------------------------------------------------
+ * Opposite of SAVE_CALLEE_SAVED_KERNEL
+ *-------------------------------------------------------------*/
+.macro RESTORE_CALLEE_SAVED_KERNEL
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	add     sp, sp, 4  /* skip usual r25 placeholder */
+#else
+	POP	r25
+#endif
+	RESTORE_R24_TO_R13
+.endm
+
+/*--------------------------------------------------------------
+ * Opposite of SAVE_CALLEE_SAVED_USER
+ *
+ * ptrace tracer or unaligned-access fixup might have changed a user mode
+ * callee reg which is saved back to usual r25 storage location
+ *-------------------------------------------------------------*/
+.macro RESTORE_CALLEE_SAVED_USER
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	POP	r12
+#else
+	POP	r25
+#endif
+	RESTORE_R24_TO_R13
+
+	; SP is back to start of pt_regs
+#ifdef CONFIG_ARC_CURR_IN_REG
+	st	r12, [sp, PT_user_r25]
+#endif
+.endm
+
+/*--------------------------------------------------------------
+ * Super FAST Restore callee saved regs by simply re-adjusting SP
+ *-------------------------------------------------------------*/
+.macro DISCARD_CALLEE_SAVED_USER
+	add     sp, sp, SZ_CALLEE_REGS
+.endm
+
+/*-------------------------------------------------------------
+ * given a tsk struct, get to the base of it's kernel mode stack
+ * tsk->thread_info is really a PAGE, whose bottom hoists stack
+ * which grows upwards towards thread_info
+ *------------------------------------------------------------*/
+
+.macro GET_TSK_STACK_BASE tsk, out
+
+	/* Get task->thread_info (this is essentially start of a PAGE) */
+	ld  \out, [\tsk, TASK_THREAD_INFO]
+
+	/* Go to end of page where stack begins (grows upwards) */
+	add2 \out, \out, (THREAD_SIZE)/4
+
+.endm
+
+/*
+ * @reg [OUT] thread_info->flags of "current"
+ */
+.macro GET_CURR_THR_INFO_FLAGS  reg
+	GET_CURR_THR_INFO_FROM_SP  \reg
+	ld  \reg, [\reg, THREAD_INFO_FLAGS]
+.endm
+
+#ifdef CONFIG_SMP
+
+/*-------------------------------------------------
+ * Retrieve the current running task on this CPU
+ * 1. Determine curr CPU id.
+ * 2. Use it to index into _current_task[ ]
+ */
+.macro  GET_CURR_TASK_ON_CPU   reg
+	GET_CPU_ID  \reg
+	ld.as  \reg, [@_current_task, \reg]
+.endm
+
+/*-------------------------------------------------
+ * Save a new task as the "current" task on this CPU
+ * 1. Determine curr CPU id.
+ * 2. Use it to index into _current_task[ ]
+ *
+ * Coded differently than GET_CURR_TASK_ON_CPU (which uses LD.AS)
+ * because ST r0, [r1, offset] can ONLY have s9 @offset
+ * while   LD can take s9 (4 byte insn) or LIMM (8 byte insn)
+ */
+
+.macro  SET_CURR_TASK_ON_CPU    tsk, tmp
+	GET_CPU_ID  \tmp
+	add2 \tmp, @_current_task, \tmp
+	st   \tsk, [\tmp]
+#ifdef CONFIG_ARC_CURR_IN_REG
+	mov r25, \tsk
+#endif
+
+.endm
+
+
+#else   /* Uniprocessor implementation of macros */
+
+.macro  GET_CURR_TASK_ON_CPU    reg
+	ld  \reg, [@_current_task]
+.endm
+
+.macro  SET_CURR_TASK_ON_CPU    tsk, tmp
+	st  \tsk, [@_current_task]
+#ifdef CONFIG_ARC_CURR_IN_REG
+	mov r25, \tsk
+#endif
+.endm
+
+#endif /* SMP / UNI */
+
+/* ------------------------------------------------------------------
+ * Get the ptr to some field of Current Task at @off in task struct
+ *  -Uses r25 for Current task ptr if that is enabled
+ */
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+
+.macro GET_CURR_TASK_FIELD_PTR  off,  reg
+	add \reg, r25, \off
+.endm
+
+#else
+
+.macro GET_CURR_TASK_FIELD_PTR  off,  reg
+	GET_CURR_TASK_ON_CPU  \reg
+	add \reg, \reg, \off
+.endm
+
+#endif	/* CONFIG_ARC_CURR_IN_REG */
+
+#endif  /* __ASM_ARC_ENTRY_H */
diff --git a/arch/arc/include/asm/exec.h b/arch/arc/include/asm/exec.h
new file mode 100644
index 000000000..6134175d9
--- /dev/null
+++ b/arch/arc/include/asm/exec.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_ARC_EXEC_H
+#define __ASM_ARC_EXEC_H
+
+/* Align to 16b */
+#define arch_align_stack(p) ((unsigned long)(p) & ~0xf)
+
+#endif
diff --git a/arch/arc/include/asm/fb.h b/arch/arc/include/asm/fb.h
new file mode 100644
index 000000000..dc2e303cd
--- /dev/null
+++ b/arch/arc/include/asm/fb.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/arc/include/asm/fpu.h b/arch/arc/include/asm/fpu.h
new file mode 100644
index 000000000..006bcf88a
--- /dev/null
+++ b/arch/arc/include/asm/fpu.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ */
+
+#ifndef _ASM_ARC_FPU_H
+#define _ASM_ARC_FPU_H
+
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+
+/* These DPFP regs need to be saved/restored across ctx-sw */
+struct arc_fpu {
+	struct {
+		unsigned int l, h;
+	} aux_dpfp[2];
+};
+
+#define fpu_init_task(regs)
+
+#else
+
+/*
+ * ARCv2 FPU Control aux register
+ *   - bits to enable Traps on Exceptions
+ *   - Rounding mode
+ *
+ * ARCv2 FPU Status aux register
+ *   - FPU exceptions flags (Inv, Div-by-Zero, overflow, underflow, inexact)
+ *   - Flag Write Enable to clear flags explicitly (vs. by fpu instructions
+ *     only
+ */
+
+struct arc_fpu {
+	unsigned int ctrl, status;
+};
+
+extern void fpu_init_task(struct pt_regs *regs);
+
+#endif	/* !CONFIG_ISA_ARCOMPACT */
+
+struct task_struct;
+
+extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
+
+#else	/* !CONFIG_ARC_FPU_SAVE_RESTORE */
+
+#define fpu_save_restore(p, n)
+#define fpu_init_task(regs)
+
+#endif	/* CONFIG_ARC_FPU_SAVE_RESTORE */
+
+#endif	/* _ASM_ARC_FPU_H */
diff --git a/arch/arc/include/asm/futex.h b/arch/arc/include/asm/futex.h
new file mode 100644
index 000000000..607d1c16d
--- /dev/null
+++ b/arch/arc/include/asm/futex.h
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Vineetg: August 2010: From Android kernel work
+ */
+
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/preempt.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+#ifdef CONFIG_ARC_HAS_LLSC
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
+							\
+	smp_mb();					\
+	__asm__ __volatile__(				\
+	"1:	llock	%1, [%2]		\n"	\
+		insn				"\n"	\
+	"2:	scond	%0, [%2]		\n"	\
+	"	bnz	1b			\n"	\
+	"	mov %0, 0			\n"	\
+	"3:					\n"	\
+	"	.section .fixup,\"ax\"		\n"	\
+	"	.align  4			\n"	\
+	"4:	mov %0, %4			\n"	\
+	"	j   3b				\n"	\
+	"	.previous			\n"	\
+	"	.section __ex_table,\"a\"	\n"	\
+	"	.align  4			\n"	\
+	"	.word   1b, 4b			\n"	\
+	"	.word   2b, 4b			\n"	\
+	"	.previous			\n"	\
+							\
+	: "=&r" (ret), "=&r" (oldval)			\
+	: "r" (uaddr), "r" (oparg), "ir" (-EFAULT)	\
+	: "cc", "memory");				\
+	smp_mb()					\
+
+#else	/* !CONFIG_ARC_HAS_LLSC */
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
+							\
+	smp_mb();					\
+	__asm__ __volatile__(				\
+	"1:	ld	%1, [%2]		\n"	\
+		insn				"\n"	\
+	"2:	st	%0, [%2]		\n"	\
+	"	mov %0, 0			\n"	\
+	"3:					\n"	\
+	"	.section .fixup,\"ax\"		\n"	\
+	"	.align  4			\n"	\
+	"4:	mov %0, %4			\n"	\
+	"	j   3b				\n"	\
+	"	.previous			\n"	\
+	"	.section __ex_table,\"a\"	\n"	\
+	"	.align  4			\n"	\
+	"	.word   1b, 4b			\n"	\
+	"	.word   2b, 4b			\n"	\
+	"	.previous			\n"	\
+							\
+	: "=&r" (ret), "=&r" (oldval)			\
+	: "r" (uaddr), "r" (oparg), "ir" (-EFAULT)	\
+	: "cc", "memory");				\
+	smp_mb()					\
+
+#endif
+
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
+{
+	int oldval = 0, ret;
+
+	if (!access_ok(uaddr, sizeof(u32)))
+		return -EFAULT;
+
+#ifndef CONFIG_ARC_HAS_LLSC
+	preempt_disable();	/* to guarantee atomic r-m-w of futex op */
+#endif
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		/* oldval = *uaddr; *uaddr += oparg ; ret = *uaddr */
+		__futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or  %0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("bic %0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %0, %1, %3", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+#ifndef CONFIG_ARC_HAS_LLSC
+	preempt_enable();
+#endif
+
+	if (!ret)
+		*oval = oldval;
+
+	return ret;
+}
+
+/*
+ * cmpxchg of futex (pagefaults disabled by caller)
+ * Return 0 for success, -EFAULT otherwise
+ */
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 expval,
+			      u32 newval)
+{
+	int ret = 0;
+	u32 existval;
+
+	if (!access_ok(uaddr, sizeof(u32)))
+		return -EFAULT;
+
+#ifndef CONFIG_ARC_HAS_LLSC
+	preempt_disable();	/* to guarantee atomic r-m-w of futex op */
+#endif
+	smp_mb();
+
+	__asm__ __volatile__(
+#ifdef CONFIG_ARC_HAS_LLSC
+	"1:	llock	%1, [%4]		\n"
+	"	brne	%1, %2, 3f		\n"
+	"2:	scond	%3, [%4]		\n"
+	"	bnz	1b			\n"
+#else
+	"1:	ld	%1, [%4]		\n"
+	"	brne	%1, %2, 3f		\n"
+	"2:	st	%3, [%4]		\n"
+#endif
+	"3:	\n"
+	"	.section .fixup,\"ax\"	\n"
+	"4:	mov %0, %5	\n"
+	"	j   3b	\n"
+	"	.previous	\n"
+	"	.section __ex_table,\"a\"	\n"
+	"	.align  4	\n"
+	"	.word   1b, 4b	\n"
+	"	.word   2b, 4b	\n"
+	"	.previous\n"
+	: "+&r"(ret), "=&r"(existval)
+	: "r"(expval), "r"(newval), "r"(uaddr), "ir"(-EFAULT)
+	: "cc", "memory");
+
+	smp_mb();
+
+#ifndef CONFIG_ARC_HAS_LLSC
+	preempt_enable();
+#endif
+	*uval = existval;
+	return ret;
+}
+
+#endif
diff --git a/arch/arc/include/asm/highmem.h b/arch/arc/include/asm/highmem.h
new file mode 100644
index 000000000..a6b8e2c35
--- /dev/null
+++ b/arch/arc/include/asm/highmem.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef CONFIG_HIGHMEM
+
+#include <uapi/asm/page.h>
+#include <asm/kmap_size.h>
+
+#define FIXMAP_SIZE		PGDIR_SIZE
+#define PKMAP_SIZE		PGDIR_SIZE
+
+/* start after vmalloc area */
+#define FIXMAP_BASE		(PAGE_OFFSET - FIXMAP_SIZE - PKMAP_SIZE)
+
+#define FIX_KMAP_SLOTS		(KM_MAX_IDX * NR_CPUS)
+#define FIX_KMAP_BEGIN		(0UL)
+#define FIX_KMAP_END		((FIX_KMAP_BEGIN + FIX_KMAP_SLOTS) - 1)
+
+#define FIXADDR_TOP		(FIXMAP_BASE + (FIX_KMAP_END << PAGE_SHIFT))
+
+/*
+ * This should be converted to the asm-generic version, but of course this
+ * is needlessly different from all other architectures. Sigh - tglx
+ */
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	(((FIXADDR_TOP - ((x) & PAGE_MASK))) >> PAGE_SHIFT)
+
+/* start after fixmap area */
+#define PKMAP_BASE		(FIXMAP_BASE + FIXMAP_SIZE)
+#define LAST_PKMAP		(PKMAP_SIZE >> PAGE_SHIFT)
+#define LAST_PKMAP_MASK		(LAST_PKMAP - 1)
+#define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
+#define PKMAP_NR(virt)		(((virt) - PKMAP_BASE) >> PAGE_SHIFT)
+
+#include <asm/cacheflush.h>
+
+extern void kmap_init(void);
+
+#define arch_kmap_local_post_unmap(vaddr)			\
+	local_flush_tlb_kernel_range(vaddr, vaddr + PAGE_SIZE)
+
+static inline void flush_cache_kmaps(void)
+{
+	flush_cache_all();
+}
+#endif
+
+#endif
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
new file mode 100644
index 000000000..5001b796f
--- /dev/null
+++ b/arch/arc/include/asm/hugepage.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+
+#ifndef _ASM_ARC_HUGEPAGE_H
+#define _ASM_ARC_HUGEPAGE_H
+
+#include <linux/types.h>
+#include <asm-generic/pgtable-nopmd.h>
+
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+	return __pte(pmd_val(pmd));
+}
+
+static inline pmd_t pte_pmd(pte_t pte)
+{
+	return __pmd(pte_val(pte));
+}
+
+#define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
+#define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+#define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
+#define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
+#define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
+#define pmd_mkhuge(pmd)		pte_pmd(pte_mkhuge(pmd_pte(pmd)))
+#define pmd_mkinvalid(pmd)	pte_pmd(pte_mknotpresent(pmd_pte(pmd)))
+#define pmd_mkclean(pmd)	pte_pmd(pte_mkclean(pmd_pte(pmd)))
+
+#define pmd_write(pmd)		pte_write(pmd_pte(pmd))
+#define pmd_young(pmd)		pte_young(pmd_pte(pmd))
+#define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
+
+#define mk_pmd(page, prot)	pte_pmd(mk_pte(page, prot))
+
+#define pmd_trans_huge(pmd)	(pmd_val(pmd) & _PAGE_HW_SZ)
+
+#define pfn_pmd(pfn, prot)	(__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
+{
+        /*
+         * open-coded pte_modify() with additional retaining of HW_SZ bit
+         * so that pmd_trans_huge() remains true for this PMD
+         */
+        return __pmd((pmd_val(pmd) & (_PAGE_CHG_MASK | _PAGE_HW_SZ)) | pgprot_val(newprot));
+}
+
+static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
+			      pmd_t *pmdp, pmd_t pmd)
+{
+	*pmdp = pmd;
+}
+
+extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
+				 pmd_t *pmd);
+
+#define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
+extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
+				unsigned long end);
+
+/* We don't have hardware dirty/accessed bits, generic_pmdp_establish is fine.*/
+#define pmdp_establish generic_pmdp_establish
+
+#endif
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
new file mode 100644
index 000000000..80347382a
--- /dev/null
+++ b/arch/arc/include/asm/io.h
@@ -0,0 +1,235 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_IO_H
+#define _ASM_ARC_IO_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/page.h>
+#include <asm/unaligned.h>
+
+#ifdef CONFIG_ISA_ARCV2
+#include <asm/barrier.h>
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
+extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size);
+extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
+				  unsigned long flags);
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *)port;
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+}
+
+extern void iounmap(const volatile void __iomem *addr);
+
+/*
+ * io{read,write}{16,32}be() macros
+ */
+#define ioread16be(p)		({ u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32be(p)		({ u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
+
+#define iowrite16be(v,p)	({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); })
+#define iowrite32be(v,p)	({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); })
+
+/* Change struct page to physical address */
+#define page_to_phys(page)		(page_to_pfn(page) << PAGE_SHIFT)
+
+#define __raw_readb __raw_readb
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	u8 b;
+
+	__asm__ __volatile__(
+	"	ldb%U1 %0, %1	\n"
+	: "=r" (b)
+	: "m" (*(volatile u8 __force *)addr)
+	: "memory");
+
+	return b;
+}
+
+#define __raw_readw __raw_readw
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	u16 s;
+
+	__asm__ __volatile__(
+	"	ldw%U1 %0, %1	\n"
+	: "=r" (s)
+	: "m" (*(volatile u16 __force *)addr)
+	: "memory");
+
+	return s;
+}
+
+#define __raw_readl __raw_readl
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	u32 w;
+
+	__asm__ __volatile__(
+	"	ld%U1 %0, %1	\n"
+	: "=r" (w)
+	: "m" (*(volatile u32 __force *)addr)
+	: "memory");
+
+	return w;
+}
+
+/*
+ * {read,write}s{b,w,l}() repeatedly access the same IO address in
+ * native endianness in 8-, 16-, 32-bit chunks {into,from} memory,
+ * @count times
+ */
+#define __raw_readsx(t,f) \
+static inline void __raw_reads##f(const volatile void __iomem *addr,	\
+				  void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			*buf++ = x;					\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			put_unaligned(x, buf++);			\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_readsb __raw_readsb
+__raw_readsx(8, b)
+#define __raw_readsw __raw_readsw
+__raw_readsx(16, w)
+#define __raw_readsl __raw_readsl
+__raw_readsx(32, l)
+
+#define __raw_writeb __raw_writeb
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__(
+	"	stb%U1 %0, %1	\n"
+	:
+	: "r" (b), "m" (*(volatile u8 __force *)addr)
+	: "memory");
+}
+
+#define __raw_writew __raw_writew
+static inline void __raw_writew(u16 s, volatile void __iomem *addr)
+{
+	__asm__ __volatile__(
+	"	stw%U1 %0, %1	\n"
+	:
+	: "r" (s), "m" (*(volatile u16 __force *)addr)
+	: "memory");
+
+}
+
+#define __raw_writel __raw_writel
+static inline void __raw_writel(u32 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__(
+	"	st%U1 %0, %1	\n"
+	:
+	: "r" (w), "m" (*(volatile u32 __force *)addr)
+	: "memory");
+
+}
+
+#define __raw_writesx(t,f)						\
+static inline void __raw_writes##f(volatile void __iomem *addr, 	\
+				   const void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	const u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			__raw_write##f(*buf++, addr);			\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			__raw_write##f(get_unaligned(buf++), addr);	\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_writesb __raw_writesb
+__raw_writesx(8, b)
+#define __raw_writesw __raw_writesw
+__raw_writesx(16, w)
+#define __raw_writesl __raw_writesl
+__raw_writesx(32, l)
+
+/*
+ * MMIO can also get buffered/optimized in micro-arch, so barriers needed
+ * Based on ARM model for the typical use case
+ *
+ *	<ST [DMA buffer]>
+ *	<writel MMIO "go" reg>
+ *  or:
+ *	<readl MMIO "status" reg>
+ *	<LD [DMA buffer]>
+ *
+ * http://lkml.kernel.org/r/20150622133656.GG1583@arm.com
+ */
+#define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
+#define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+#define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+#define readsb(p,d,l)		({ __raw_readsb(p,d,l); __iormb(); })
+#define readsw(p,d,l)		({ __raw_readsw(p,d,l); __iormb(); })
+#define readsl(p,d,l)		({ __raw_readsl(p,d,l); __iormb(); })
+
+#define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
+#define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
+#define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
+#define writesb(p,d,l)		({ __iowmb(); __raw_writesb(p,d,l); })
+#define writesw(p,d,l)		({ __iowmb(); __raw_writesw(p,d,l); })
+#define writesl(p,d,l)		({ __iowmb(); __raw_writesl(p,d,l); })
+
+/*
+ * Relaxed API for drivers which can handle barrier ordering themselves
+ *
+ * Also these are defined to perform little endian accesses.
+ * To provide the typical device register semantics of fixed endian,
+ * swap the byte order for Big Endian
+ *
+ * http://lkml.kernel.org/r/201603100845.30602.arnd@arndb.de
+ */
+#define readb_relaxed(c)	__raw_readb(c)
+#define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \
+					__raw_readw(c)); __r; })
+#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \
+					__raw_readl(c)); __r; })
+
+#define writeb_relaxed(v,c)	__raw_writeb(v,c)
+#define writew_relaxed(v,c)	__raw_writew((__force u16) cpu_to_le16(v),c)
+#define writel_relaxed(v,c)	__raw_writel((__force u32) cpu_to_le32(v),c)
+
+#include <asm-generic/io.h>
+
+#endif /* _ASM_ARC_IO_H */
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
new file mode 100644
index 000000000..0309cb405
--- /dev/null
+++ b/arch/arc/include/asm/irq.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_ARC_IRQ_H
+#define __ASM_ARC_IRQ_H
+
+/*
+ * ARCv2 can support 240 interrupts in the core interrupts controllers and
+ * 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most
+ * configurations of boards.
+ * This doesnt affect ARCompact, but we change it to same value
+ */
+#define NR_IRQS		512
+
+/* Platform Independent IRQs */
+#ifdef CONFIG_ISA_ARCV2
+#define IPI_IRQ		19
+#define SOFTIRQ_IRQ	21
+#define FIRST_EXT_IRQ	24
+#endif
+
+#include <linux/interrupt.h>
+#include <asm-generic/irq.h>
+
+extern void arc_init_IRQ(void);
+
+#endif
diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
new file mode 100644
index 000000000..fb3c21f1a
--- /dev/null
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_IRQFLAGS_ARCV2_H
+#define __ASM_IRQFLAGS_ARCV2_H
+
+#include <asm/arcregs.h>
+
+/* status32 Bits */
+#define STATUS_AD_BIT	19   /* Disable Align chk: core supports non-aligned */
+#define STATUS_IE_BIT	31
+
+#define STATUS_AD_MASK		(1<<STATUS_AD_BIT)
+#define STATUS_IE_MASK		(1<<STATUS_IE_BIT)
+
+/* status32 Bits as encoded/expected by CLRI/SETI */
+#define CLRI_STATUS_IE_BIT	4
+
+#define CLRI_STATUS_E_MASK	0xF
+#define CLRI_STATUS_IE_MASK	(1 << CLRI_STATUS_IE_BIT)
+
+#define AUX_USER_SP		0x00D
+#define AUX_IRQ_CTRL		0x00E
+#define AUX_IRQ_ACT		0x043	/* Active Intr across all levels */
+#define AUX_IRQ_LVL_PEND	0x200	/* Pending Intr across all levels */
+#define AUX_IRQ_HINT		0x201	/* For generating Soft Interrupts */
+#define AUX_IRQ_PRIORITY	0x206
+#define ICAUSE			0x40a
+#define AUX_IRQ_SELECT		0x40b
+#define AUX_IRQ_ENABLE		0x40c
+
+/* Was Intr taken in User Mode */
+#define AUX_IRQ_ACT_BIT_U	31
+
+/*
+ * Hardware supports 16 priorities (0 highest, 15 lowest)
+ * Linux by default runs at 1, priority 0 reserved for NMI style interrupts
+ */
+#define ARCV2_IRQ_DEF_PRIO	1
+
+/* seed value for status register */
+#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
+#define __AD_ENB	STATUS_AD_MASK
+#else
+#define __AD_ENB	0
+#endif
+
+#define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | __AD_ENB | \
+					(ARCV2_IRQ_DEF_PRIO << 1))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Save IRQ state and disable IRQs
+ */
+static inline long arch_local_irq_save(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__("	clri %0	\n" : "=r" (flags) : : "memory");
+
+	return flags;
+}
+
+/*
+ * restore saved IRQ state
+ */
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	__asm__ __volatile__("	seti %0	\n" : : "r" (flags) : "memory");
+}
+
+/*
+ * Unconditionally Enable IRQs
+ */
+static inline void arch_local_irq_enable(void)
+{
+	unsigned int irqact = read_aux_reg(AUX_IRQ_ACT);
+
+	if (irqact & 0xffff)
+		write_aux_reg(AUX_IRQ_ACT, irqact & ~0xffff);
+
+	__asm__ __volatile__("	seti	\n" : : : "memory");
+}
+
+/*
+ * Unconditionally Disable IRQs
+ */
+static inline void arch_local_irq_disable(void)
+{
+	__asm__ __volatile__("	clri	\n" : : : "memory");
+}
+
+/*
+ * save IRQ state
+ */
+static inline long arch_local_save_flags(void)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__(
+	"	lr  %0, [status32]	\n"
+	: "=&r"(temp)
+	:
+	: "memory");
+
+	/* To be compatible with irq_save()/irq_restore()
+	 * encode the irq bits as expected by CLRI/SETI
+	 * (this was needed to make CONFIG_TRACE_IRQFLAGS work)
+	 */
+	temp = (1 << 5) |
+		((!!(temp & STATUS_IE_MASK)) << CLRI_STATUS_IE_BIT) |
+		((temp >> 1) & CLRI_STATUS_E_MASK);
+	return temp;
+}
+
+/*
+ * Query IRQ state
+ */
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & CLRI_STATUS_IE_MASK);
+}
+
+static inline int arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+static inline void arc_softirq_trigger(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, irq);
+}
+
+static inline void arc_softirq_clear(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, 0);
+}
+
+#else
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+.macro TRACE_ASM_IRQ_DISABLE
+	bl	trace_hardirqs_off
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+	bl	trace_hardirqs_on
+.endm
+
+#else
+
+.macro TRACE_ASM_IRQ_DISABLE
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+.endm
+
+#endif
+.macro IRQ_DISABLE  scratch
+	clri
+	TRACE_ASM_IRQ_DISABLE
+.endm
+
+.macro IRQ_ENABLE  scratch
+	TRACE_ASM_IRQ_ENABLE
+	seti
+.endm
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
new file mode 100644
index 000000000..0d63e568d
--- /dev/null
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -0,0 +1,201 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_IRQFLAGS_ARCOMPACT_H
+#define __ASM_IRQFLAGS_ARCOMPACT_H
+
+/* vineetg: March 2010 : local_irq_save( ) optimisation
+ *  -Remove explicit mov of current status32 into reg, that is not needed
+ *  -Use BIC  insn instead of INVERTED + AND
+ *  -Conditionally disable interrupts (if they are not enabled, don't disable)
+*/
+
+#include <asm/arcregs.h>
+
+/* status32 Reg bits related to Interrupt Handling */
+#define STATUS_E1_BIT		1	/* Int 1 enable */
+#define STATUS_E2_BIT		2	/* Int 2 enable */
+#define STATUS_A1_BIT		3	/* Int 1 active */
+#define STATUS_A2_BIT		4	/* Int 2 active */
+#define STATUS_AE_BIT		5	/* Exception active */
+
+#define STATUS_E1_MASK		(1<<STATUS_E1_BIT)
+#define STATUS_E2_MASK		(1<<STATUS_E2_BIT)
+#define STATUS_A1_MASK		(1<<STATUS_A1_BIT)
+#define STATUS_A2_MASK		(1<<STATUS_A2_BIT)
+#define STATUS_AE_MASK		(1<<STATUS_AE_BIT)
+#define STATUS_IE_MASK		(STATUS_E1_MASK | STATUS_E2_MASK)
+
+/* Other Interrupt Handling related Aux regs */
+#define AUX_IRQ_LEV		0x200	/* IRQ Priority: L1 or L2 */
+#define AUX_IRQ_HINT		0x201	/* For generating Soft Interrupts */
+#define AUX_IRQ_LV12		0x43	/* interrupt level register */
+
+#define AUX_IENABLE		0x40c
+#define AUX_ITRIGGER		0x40d
+#define AUX_IPULSE		0x415
+
+#define ISA_INIT_STATUS_BITS	STATUS_IE_MASK
+
+#ifndef __ASSEMBLY__
+
+/******************************************************************
+ * IRQ Control Macros
+ *
+ * All of them have "memory" clobber (compiler barrier) which is needed to
+ * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available)
+ * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register)
+ *
+ * Noted at the time of Abilis Timer List corruption
+ *
+ * Orig Bug + Rejected solution:
+ * https://lore.kernel.org/lkml/1364553218-31255-1-git-send-email-vgupta@synopsys.com
+ *
+ * Reasoning:
+ * https://lore.kernel.org/lkml/CA+55aFyFWjpSVQM6M266tKrG_ZXJzZ-nYejpmXYQXbrr42mGPQ@mail.gmail.com
+ *
+ ******************************************************************/
+
+/*
+ * Save IRQ state and disable IRQs
+ */
+static inline long arch_local_irq_save(void)
+{
+	unsigned long temp, flags;
+
+	__asm__ __volatile__(
+	"	lr  %1, [status32]	\n"
+	"	bic %0, %1, %2		\n"
+	"	and.f 0, %1, %2	\n"
+	"	flag.nz %0		\n"
+	: "=r"(temp), "=r"(flags)
+	: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
+	: "memory", "cc");
+
+	return flags;
+}
+
+/*
+ * restore saved IRQ state
+ */
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+
+	__asm__ __volatile__(
+	"	flag %0			\n"
+	:
+	: "r"(flags)
+	: "memory");
+}
+
+/*
+ * Unconditionally Enable IRQs
+ */
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+extern void arch_local_irq_enable(void);
+#else
+static inline void arch_local_irq_enable(void)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__(
+	"	lr   %0, [status32]	\n"
+	"	or   %0, %0, %1		\n"
+	"	flag %0			\n"
+	: "=&r"(temp)
+	: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
+	: "cc", "memory");
+}
+#endif
+
+/*
+ * Unconditionally Disable IRQs
+ */
+static inline void arch_local_irq_disable(void)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__(
+	"	lr  %0, [status32]	\n"
+	"	and %0, %0, %1		\n"
+	"	flag %0			\n"
+	: "=&r"(temp)
+	: "n"(~(STATUS_E1_MASK | STATUS_E2_MASK))
+	: "memory");
+}
+
+/*
+ * save IRQ state
+ */
+static inline long arch_local_save_flags(void)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__(
+	"	lr  %0, [status32]	\n"
+	: "=&r"(temp)
+	:
+	: "memory");
+
+	return temp;
+}
+
+/*
+ * Query IRQ state
+ */
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & (STATUS_E1_MASK
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+			| STATUS_E2_MASK
+#endif
+		));
+}
+
+static inline int arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+#else
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+.macro TRACE_ASM_IRQ_DISABLE
+	bl	trace_hardirqs_off
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+	bl	trace_hardirqs_on
+.endm
+
+#else
+
+.macro TRACE_ASM_IRQ_DISABLE
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+.endm
+
+#endif
+
+.macro IRQ_DISABLE  scratch
+	lr	\scratch, [status32]
+	bic	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
+	flag	\scratch
+	TRACE_ASM_IRQ_DISABLE
+.endm
+
+.macro IRQ_ENABLE  scratch
+	TRACE_ASM_IRQ_ENABLE
+	lr	\scratch, [status32]
+	or	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
+	flag	\scratch
+.endm
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h
new file mode 100644
index 000000000..edf201a69
--- /dev/null
+++ b/arch/arc/include/asm/irqflags.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_ARC_IRQFLAGS_H
+#define __ASM_ARC_IRQFLAGS_H
+
+#ifdef CONFIG_ISA_ARCOMPACT
+#include <asm/irqflags-compact.h>
+#else
+#include <asm/irqflags-arcv2.h>
+#endif
+
+#endif
diff --git a/arch/arc/include/asm/jump_label.h b/arch/arc/include/asm/jump_label.h
new file mode 100644
index 000000000..9d9618079
--- /dev/null
+++ b/arch/arc/include/asm/jump_label.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARC_JUMP_LABEL_H
+#define _ASM_ARC_JUMP_LABEL_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+
+#define JUMP_LABEL_NOP_SIZE 4
+
+/*
+ * NOTE about '.balign 4':
+ *
+ * To make atomic update of patched instruction available we need to guarantee
+ * that this instruction doesn't cross L1 cache line boundary.
+ *
+ * As of today we simply align instruction which can be patched by 4 byte using
+ * ".balign 4" directive. In that case patched instruction is aligned with one
+ * 16-bit NOP_S if this is required.
+ * However 'align by 4' directive is much stricter than it actually required.
+ * It's enough that our 32-bit instruction don't cross L1 cache line boundary /
+ * L1 I$ fetch block boundary which can be achieved by using
+ * ".bundle_align_mode" assembler directive. That will save us from adding
+ * useless NOP_S padding in most of the cases.
+ *
+ * TODO: switch to ".bundle_align_mode" directive using whin it will be
+ * supported by ARC toolchain.
+ */
+
+static __always_inline bool arch_static_branch(struct static_key *key,
+					       bool branch)
+{
+	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+		 "1:							\n"
+		 "nop							\n"
+		 ".pushsection __jump_table, \"aw\"			\n"
+		 ".word 1b, %l[l_yes], %c0				\n"
+		 ".popsection						\n"
+		 : : "i" (&((char *)key)[branch]) : : l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+static __always_inline bool arch_static_branch_jump(struct static_key *key,
+						    bool branch)
+{
+	asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"	\n"
+		 "1:							\n"
+		 "b %l[l_yes]						\n"
+		 ".pushsection __jump_table, \"aw\"			\n"
+		 ".word 1b, %l[l_yes], %c0				\n"
+		 ".popsection						\n"
+		 : : "i" (&((char *)key)[branch]) : : l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+typedef u32 jump_label_t;
+
+struct jump_entry {
+	jump_label_t code;
+	jump_label_t target;
+	jump_label_t key;
+};
+
+#endif  /* __ASSEMBLY__ */
+#endif
diff --git a/arch/arc/include/asm/kdebug.h b/arch/arc/include/asm/kdebug.h
new file mode 100644
index 000000000..f92049d1d
--- /dev/null
+++ b/arch/arc/include/asm/kdebug.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_KDEBUG_H
+#define _ASM_ARC_KDEBUG_H
+
+enum die_val {
+	DIE_UNUSED,
+	DIE_TRAP,
+	DIE_IERR,
+	DIE_OOPS
+};
+
+#endif
diff --git a/arch/arc/include/asm/kgdb.h b/arch/arc/include/asm/kgdb.h
new file mode 100644
index 000000000..f9f71b909
--- /dev/null
+++ b/arch/arc/include/asm/kgdb.h
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * kgdb support for ARC
+ *
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ARC_KGDB_H__
+#define __ARC_KGDB_H__
+
+#ifdef CONFIG_KGDB
+
+#include <asm/ptrace.h>
+
+/* to ensure compatibility with Linux 2.6.35, we don't implement the get/set
+ * register API yet */
+#undef DBG_MAX_REG_NUM
+
+#define GDB_MAX_REGS		87
+
+#define BREAK_INSTR_SIZE	2
+#define CACHE_FLUSH_IS_SAFE	1
+#define NUMREGBYTES		(GDB_MAX_REGS * 4)
+#define BUFMAX			2048
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__ ("trap_s	0x4\n");
+}
+
+extern void kgdb_trap(struct pt_regs *regs);
+
+/* This is the numbering of registers according to the GDB. See GDB's
+ * arc-tdep.h for details.
+ *
+ * Registers are ordered for GDB 7.5. It is incompatible with GDB 6.8. */
+enum arc_linux_regnums {
+	_R0		= 0,
+	_R1, _R2, _R3, _R4, _R5, _R6, _R7, _R8, _R9, _R10, _R11, _R12, _R13,
+	_R14, _R15, _R16, _R17, _R18, _R19, _R20, _R21, _R22, _R23, _R24,
+	_R25, _R26,
+	_FP		= 27,
+	__SP		= 28,
+	_R30		= 30,
+	_BLINK		= 31,
+	_LP_COUNT	= 60,
+	_STOP_PC	= 64,
+	_RET		= 64,
+	_LP_START	= 65,
+	_LP_END		= 66,
+	_STATUS32	= 67,
+	_ECR		= 76,
+	_BTA		= 82,
+};
+
+#else
+#define kgdb_trap(regs)
+#endif
+
+#endif	/* __ARC_KGDB_H__ */
diff --git a/arch/arc/include/asm/kprobes.h b/arch/arc/include/asm/kprobes.h
new file mode 100644
index 000000000..de1566e32
--- /dev/null
+++ b/arch/arc/include/asm/kprobes.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ARC_KPROBES_H
+#define _ARC_KPROBES_H
+
+#include <asm-generic/kprobes.h>
+
+#ifdef CONFIG_KPROBES
+
+typedef u16 kprobe_opcode_t;
+
+#define UNIMP_S_INSTRUCTION 0x79e0
+#define TRAP_S_2_INSTRUCTION 0x785e
+
+#define MAX_INSN_SIZE   8
+#define MAX_STACK_SIZE  64
+
+struct arch_specific_insn {
+	int is_short;
+	kprobe_opcode_t *t1_addr, *t2_addr;
+	kprobe_opcode_t t1_opcode, t2_opcode;
+};
+
+#define flush_insn_slot(p)  do {  } while (0)
+
+#define kretprobe_blacklist_size    0
+
+struct kprobe;
+
+void arch_remove_kprobe(struct kprobe *p);
+
+int kprobe_exceptions_notify(struct notifier_block *self,
+			     unsigned long val, void *data);
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+};
+
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	struct prev_kprobe prev_kprobe;
+};
+
+int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
+void __kretprobe_trampoline(void);
+void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
+#else
+#define trap_is_kprobe(address, regs)
+#endif /* CONFIG_KPROBES */
+
+#endif /* _ARC_KPROBES_H */
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
new file mode 100644
index 000000000..8a3fb71e9
--- /dev/null
+++ b/arch/arc/include/asm/linkage.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#include <asm/dwarf.h>
+
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
+#ifdef __ASSEMBLY__
+
+.macro ST2 e, o, off
+#ifdef CONFIG_ARC_HAS_LL64
+	std	\e, [sp, \off]
+#else
+	st	\e, [sp, \off]
+	st	\o, [sp, \off+4]
+#endif
+.endm
+
+.macro LD2 e, o, off
+#ifdef CONFIG_ARC_HAS_LL64
+	ldd	\e, [sp, \off]
+#else
+	ld	\e, [sp, \off]
+	ld	\o, [sp, \off+4]
+#endif
+.endm
+
+/* annotation for data we want in DCCM - if enabled in .config */
+.macro ARCFP_DATA nm
+#ifdef CONFIG_ARC_HAS_DCCM
+	.section .data.arcfp
+#else
+	.section .data
+#endif
+	.global \nm
+.endm
+
+/* annotation for data we want in DCCM - if enabled in .config */
+.macro ARCFP_CODE
+#ifdef CONFIG_ARC_HAS_ICCM
+	.section .text.arcfp, "ax",@progbits
+#else
+	.section .text, "ax",@progbits
+#endif
+.endm
+
+#define ENTRY_CFI(name)		\
+	.globl name ASM_NL	\
+	ALIGN ASM_NL 		\
+	name: ASM_NL		\
+	CFI_STARTPROC ASM_NL
+
+#define END_CFI(name) 		\
+	CFI_ENDPROC ASM_NL	\
+	.size name, .-name
+
+#else	/* !__ASSEMBLY__ */
+
+#ifdef CONFIG_ARC_HAS_ICCM
+#define __arcfp_code __section(".text.arcfp")
+#else
+#define __arcfp_code __section(".text")
+#endif
+
+#ifdef CONFIG_ARC_HAS_DCCM
+#define __arcfp_data __section(".data.arcfp")
+#else
+#define __arcfp_data __section(".data")
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h
new file mode 100644
index 000000000..c4e197059
--- /dev/null
+++ b/arch/arc/include/asm/mach_desc.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * based on METAG mach/arch.h (which in turn was based on ARM)
+ */
+
+#ifndef _ASM_ARC_MACH_DESC_H_
+#define _ASM_ARC_MACH_DESC_H_
+
+/**
+ * struct machine_desc - Board specific callbacks, called from ARC common code
+ *	Provided by each ARC board using MACHINE_START()/MACHINE_END(), so
+ *	a multi-platform kernel builds with array of such descriptors.
+ *	We extend the early DT scan to also match the DT's "compatible" string
+ *	against the @dt_compat of all such descriptors, and one with highest
+ *	"DT score" is selected as global @machine_desc.
+ *
+ * @name:		Board/SoC name
+ * @dt_compat:		Array of device tree 'compatible' strings
+ * 			(XXX: although only 1st entry is looked at)
+ * @init_early:		Very early callback [called from setup_arch()]
+ * @init_per_cpu:	for each CPU as it is coming up (SMP as well as UP)
+ * 			[(M):init_IRQ(), (o):start_kernel_secondary()]
+ * @init_machine:	arch initcall level callback (e.g. populate static
+ * 			platform devices or parse Devicetree)
+ * @init_late:		Late initcall level callback
+ *
+ */
+struct machine_desc {
+	const char		*name;
+	const char		**dt_compat;
+	void			(*init_early)(void);
+	void			(*init_per_cpu)(unsigned int);
+	void			(*init_machine)(void);
+	void			(*init_late)(void);
+
+};
+
+/*
+ * Current machine - only accessible during boot.
+ */
+extern const struct machine_desc *machine_desc;
+
+/*
+ * Machine type table - also only accessible during boot
+ */
+extern const struct machine_desc __arch_info_begin[], __arch_info_end[];
+
+/*
+ * Set of macros to define architecture features.
+ * This is built into a table by the linker.
+ */
+#define MACHINE_START(_type, _name)			\
+static const struct machine_desc __mach_desc_##_type	\
+__used __section(".arch.info.init") = {			\
+	.name		= _name,
+
+#define MACHINE_END				\
+};
+
+extern const struct machine_desc *setup_machine_fdt(void *dt);
+
+#endif
diff --git a/arch/arc/include/asm/mmu-arcv2.h b/arch/arc/include/asm/mmu-arcv2.h
new file mode 100644
index 000000000..ed9036d4e
--- /dev/null
+++ b/arch/arc/include/asm/mmu-arcv2.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012, 2019-20 Synopsys, Inc. (www.synopsys.com)
+ *
+ * MMUv3 (arc700) / MMUv4 (archs) are software page walked and software managed.
+ * This file contains the TLB access registers and commands
+ */
+
+#ifndef _ASM_ARC_MMU_ARCV2_H
+#define _ASM_ARC_MMU_ARCV2_H
+
+/*
+ * TLB Management regs
+ */
+#define ARC_REG_MMU_BCR		0x06f
+
+#ifdef CONFIG_ARC_MMU_V3
+#define ARC_REG_TLBPD0		0x405
+#define ARC_REG_TLBPD1		0x406
+#define ARC_REG_TLBPD1HI	0	/* Dummy: allows common code */
+#define ARC_REG_TLBINDEX	0x407
+#define ARC_REG_TLBCOMMAND	0x408
+#define ARC_REG_PID		0x409
+#define ARC_REG_SCRATCH_DATA0	0x418
+#else
+#define ARC_REG_TLBPD0		0x460
+#define ARC_REG_TLBPD1		0x461
+#define ARC_REG_TLBPD1HI	0x463
+#define ARC_REG_TLBINDEX	0x464
+#define ARC_REG_TLBCOMMAND	0x465
+#define ARC_REG_PID		0x468
+#define ARC_REG_SCRATCH_DATA0	0x46c
+#endif
+
+/* Bits in MMU PID reg */
+#define __TLB_ENABLE		(1 << 31)
+#define __PROG_ENABLE		(1 << 30)
+#define MMU_ENABLE		(__TLB_ENABLE | __PROG_ENABLE)
+
+/* Bits in TLB Index reg */
+#define TLB_LKUP_ERR		0x80000000
+
+#ifdef CONFIG_ARC_MMU_V3
+#define TLB_DUP_ERR		(TLB_LKUP_ERR | 0x00000001)
+#else
+#define TLB_DUP_ERR		(TLB_LKUP_ERR | 0x40000000)
+#endif
+
+/*
+ * TLB Commands
+ */
+#define TLBWrite    		0x1
+#define TLBRead     		0x2
+#define TLBGetIndex 		0x3
+#define TLBProbe    		0x4
+#define TLBWriteNI		0x5  /* write JTLB without inv uTLBs */
+#define TLBIVUTLB		0x6  /* explicitly inv uTLBs */
+
+#ifdef CONFIG_ARC_MMU_V4
+#define TLBInsertEntry		0x7
+#define TLBDeleteEntry		0x8
+#endif
+
+/* Masks for actual TLB "PD"s */
+#define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
+#define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
+
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
+
+#ifndef __ASSEMBLY__
+
+struct mm_struct;
+extern int pae40_exist_but_not_enab(void);
+
+static inline int is_pae40_enabled(void)
+{
+	return IS_ENABLED(CONFIG_ARC_HAS_PAE40);
+}
+
+static inline void mmu_setup_asid(struct mm_struct *mm, unsigned long asid)
+{
+	write_aux_reg(ARC_REG_PID, asid | MMU_ENABLE);
+}
+
+static inline void mmu_setup_pgd(struct mm_struct *mm, void *pgd)
+{
+	/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
+#ifdef CONFIG_ISA_ARCV2
+	write_aux_reg(ARC_REG_SCRATCH_DATA0, (unsigned int)pgd);
+#endif
+}
+
+#else
+
+.macro ARC_MMU_REENABLE reg
+	lr \reg, [ARC_REG_PID]
+	or \reg, \reg, MMU_ENABLE
+	sr \reg, [ARC_REG_PID]
+.endm
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
new file mode 100644
index 000000000..ca427c30f
--- /dev/null
+++ b/arch/arc/include/asm/mmu.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_MMU_H
+#define _ASM_ARC_MMU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/threads.h>	/* NR_CPUS */
+
+typedef struct {
+	unsigned long asid[NR_CPUS];	/* 8 bit MMU PID + Generation cycle */
+} mm_context_t;
+
+#endif
+
+#include <asm/mmu-arcv2.h>
+
+#endif
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
new file mode 100644
index 000000000..dda471f5f
--- /dev/null
+++ b/arch/arc/include/asm/mmu_context.h
@@ -0,0 +1,174 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * vineetg: May 2011
+ *  -Refactored get_new_mmu_context( ) to only handle live-mm.
+ *   retiring-mm handled in other hooks
+ *
+ * Vineetg: March 25th, 2008: Bug #92690
+ *  -Major rewrite of Core ASID allocation routine get_new_mmu_context
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_MMU_CONTEXT_H
+#define _ASM_ARC_MMU_CONTEXT_H
+
+#include <linux/sched/mm.h>
+
+#include <asm/tlb.h>
+#include <asm-generic/mm_hooks.h>
+
+/*		ARC ASID Management
+ *
+ * MMU tags TLBs with an 8-bit ASID, avoiding need to flush the TLB on
+ * context-switch.
+ *
+ * ASID is managed per cpu, so task threads across CPUs can have different
+ * ASID. Global ASID management is needed if hardware supports TLB shootdown
+ * and/or shared TLB across cores, which ARC doesn't.
+ *
+ * Each task is assigned unique ASID, with a simple round-robin allocator
+ * tracked in @asid_cpu. When 8-bit value rolls over,a new cycle is started
+ * over from 0, and TLB is flushed
+ *
+ * A new allocation cycle, post rollover, could potentially reassign an ASID
+ * to a different task. Thus the rule is to refresh the ASID in a new cycle.
+ * The 32 bit @asid_cpu (and mm->asid) have 8 bits MMU PID and rest 24 bits
+ * serve as cycle/generation indicator and natural 32 bit unsigned math
+ * automagically increments the generation when lower 8 bits rollover.
+ */
+
+#define MM_CTXT_ASID_MASK	0x000000ff /* MMU PID reg :8 bit PID */
+#define MM_CTXT_CYCLE_MASK	(~MM_CTXT_ASID_MASK)
+
+#define MM_CTXT_FIRST_CYCLE	(MM_CTXT_ASID_MASK + 1)
+#define MM_CTXT_NO_ASID		0UL
+
+#define asid_mm(mm, cpu)	mm->context.asid[cpu]
+#define hw_pid(mm, cpu)		(asid_mm(mm, cpu) & MM_CTXT_ASID_MASK)
+
+DECLARE_PER_CPU(unsigned int, asid_cache);
+#define asid_cpu(cpu)		per_cpu(asid_cache, cpu)
+
+/*
+ * Get a new ASID if task doesn't have a valid one (unalloc or from prev cycle)
+ * Also set the MMU PID register to existing/updated ASID
+ */
+static inline void get_new_mmu_context(struct mm_struct *mm)
+{
+	const unsigned int cpu = smp_processor_id();
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/*
+	 * Move to new ASID if it was not from current alloc-cycle/generation.
+	 * This is done by ensuring that the generation bits in both mm->ASID
+	 * and cpu's ASID counter are exactly same.
+	 *
+	 * Note: Callers needing new ASID unconditionally, independent of
+	 * 	 generation, e.g. local_flush_tlb_mm() for forking  parent,
+	 * 	 first need to destroy the context, setting it to invalid
+	 * 	 value.
+	 */
+	if (!((asid_mm(mm, cpu) ^ asid_cpu(cpu)) & MM_CTXT_CYCLE_MASK))
+		goto set_hw;
+
+	/* move to new ASID and handle rollover */
+	if (unlikely(!(++asid_cpu(cpu) & MM_CTXT_ASID_MASK))) {
+
+		local_flush_tlb_all();
+
+		/*
+		 * Above check for rollover of 8 bit ASID in 32 bit container.
+		 * If the container itself wrapped around, set it to a non zero
+		 * "generation" to distinguish from no context
+		 */
+		if (!asid_cpu(cpu))
+			asid_cpu(cpu) = MM_CTXT_FIRST_CYCLE;
+	}
+
+	/* Assign new ASID to tsk */
+	asid_mm(mm, cpu) = asid_cpu(cpu);
+
+set_hw:
+	mmu_setup_asid(mm, hw_pid(mm, cpu));
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+#define init_new_context init_new_context
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	int i;
+
+	for_each_possible_cpu(i)
+		asid_mm(mm, i) = MM_CTXT_NO_ASID;
+
+	return 0;
+}
+
+#define destroy_context destroy_context
+static inline void destroy_context(struct mm_struct *mm)
+{
+	unsigned long flags;
+
+	/* Needed to elide CONFIG_DEBUG_PREEMPT warning */
+	local_irq_save(flags);
+	asid_mm(mm, smp_processor_id()) = MM_CTXT_NO_ASID;
+	local_irq_restore(flags);
+}
+
+/* Prepare the MMU for task: setup PID reg with allocated ASID
+    If task doesn't have an ASID (never alloc or stolen, get a new ASID)
+*/
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	const int cpu = smp_processor_id();
+
+	/*
+	 * Note that the mm_cpumask is "aggregating" only, we don't clear it
+	 * for the switched-out task, unlike some other arches.
+	 * It is used to enlist cpus for sending TLB flush IPIs and not sending
+	 * it to CPUs where a task once ran-on, could cause stale TLB entry
+	 * re-use, specially for a multi-threaded task.
+	 * e.g. T1 runs on C1, migrates to C3. T2 running on C2 munmaps.
+	 *      For a non-aggregating mm_cpumask, IPI not sent C1, and if T1
+	 *      were to re-migrate to C1, it could access the unmapped region
+	 *      via any existing stale TLB entries.
+	 */
+	cpumask_set_cpu(cpu, mm_cpumask(next));
+
+	mmu_setup_pgd(next, next->pgd);
+
+	get_new_mmu_context(next);
+}
+
+/*
+ * activate_mm defaults (in asm-generic) to switch_mm and is called at the
+ * time of execve() to get a new ASID Note the subtlety here:
+ * get_new_mmu_context() behaves differently here vs. in switch_mm(). Here
+ * it always returns a new ASID, because mm has an unallocated "initial"
+ * value, while in latter, it moves to a new ASID, only if it was
+ * unallocated
+ */
+
+/* it seemed that deactivate_mm( ) is a reasonable place to do book-keeping
+ * for retiring-mm. However destroy_context( ) still needs to do that because
+ * between mm_release( ) = >deactive_mm( ) and
+ * mmput => .. => __mmdrop( ) => destroy_context( )
+ * there is a good chance that task gets sched-out/in, making it's ASID valid
+ * again (this teased me for a whole day).
+ */
+
+#include <asm-generic/mmu_context.h>
+
+#endif /* __ASM_ARC_MMU_CONTEXT_H */
diff --git a/arch/arc/include/asm/module.h b/arch/arc/include/asm/module.h
new file mode 100644
index 000000000..f534a1fef
--- /dev/null
+++ b/arch/arc/include/asm/module.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_MODULE_H
+#define _ASM_ARC_MODULE_H
+
+#include <asm-generic/module.h>
+
+struct mod_arch_specific {
+#ifdef CONFIG_ARC_DW2_UNWIND
+	void *unw_info;
+	int unw_sec_idx;
+#endif
+	const char *secstr;
+};
+
+#endif /* _ASM_ARC_MODULE_H */
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
new file mode 100644
index 000000000..9a62e1d87
--- /dev/null
+++ b/arch/arc/include/asm/page.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+#ifndef __ASM_ARC_PAGE_H
+#define __ASM_ARC_PAGE_H
+
+#include <uapi/asm/page.h>
+
+#ifdef CONFIG_ARC_HAS_PAE40
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	40
+#define PAGE_MASK_PHYS			(0xff00000000ull | PAGE_MASK)
+
+#else /* CONFIG_ARC_HAS_PAE40 */
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+#define PAGE_MASK_PHYS			PAGE_MASK
+
+#endif /* CONFIG_ARC_HAS_PAE40 */
+
+#ifndef __ASSEMBLY__
+
+#define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+#define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
+
+struct vm_area_struct;
+struct page;
+
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+
+void copy_user_highpage(struct page *to, struct page *from,
+			unsigned long u_vaddr, struct vm_area_struct *vma);
+void clear_user_page(void *to, unsigned long u_vaddr, struct page *page);
+
+typedef struct {
+	unsigned long pgd;
+} pgd_t;
+
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) })
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
+typedef struct {
+	unsigned long pud;
+} pud_t;
+
+#define pud_val(x)      	((x).pud)
+#define __pud(x)        	((pud_t) { (x) })
+
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+
+typedef struct {
+	unsigned long pmd;
+} pmd_t;
+
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) })
+
+#endif
+
+typedef struct {
+#ifdef CONFIG_ARC_HAS_PAE40
+	unsigned long long pte;
+#else
+	unsigned long pte;
+#endif
+} pte_t;
+
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) })
+
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) })
+#define pte_pgprot(x)	__pgprot(pte_val(x))
+
+typedef struct page *pgtable_t;
+
+/*
+ * Use virt_to_pfn with caution:
+ * If used in pte or paddr related macros, it could cause truncation
+ * in PAE40 builds
+ * As a rule of thumb, only use it in helpers starting with virt_
+ * You have been warned !
+ */
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+
+/*
+ * When HIGHMEM is enabled we have holes in the memory map so we need
+ * pfn_valid() that takes into account the actual extents of the physical
+ * memory
+ */
+#ifdef CONFIG_HIGHMEM
+
+extern unsigned long arch_pfn_offset;
+#define ARCH_PFN_OFFSET		arch_pfn_offset
+
+extern int pfn_valid(unsigned long pfn);
+#define pfn_valid		pfn_valid
+
+#else /* CONFIG_HIGHMEM */
+
+#define ARCH_PFN_OFFSET		virt_to_pfn(CONFIG_LINUX_RAM_BASE)
+#define pfn_valid(pfn)		(((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * __pa, __va, virt_to_page (ALERT: deprecated, don't use them)
+ *
+ * These macros have historically been misnamed
+ * virt here means link-address/program-address as embedded in object code.
+ * And for ARC, link-addr = physical address
+ */
+#define __pa(vaddr)  		((unsigned long)(vaddr))
+#define __va(paddr)  		((void *)((unsigned long)(paddr)))
+
+#define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
+#define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
+
+/* Default Permissions for stack/heaps pages (Non Executable) */
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_NON_EXEC
+
+#define WANT_PAGE_VIRTUAL   1
+
+#include <asm-generic/memory_model.h>   /* page_to_pfn, pfn_to_page */
+#include <asm-generic/getorder.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/pci.h b/arch/arc/include/asm/pci.h
new file mode 100644
index 000000000..a6858e111
--- /dev/null
+++ b/arch/arc/include/asm/pci.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_PCI_H
+#define _ASM_ARC_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/ioport.h>
+
+#define PCIBIOS_MIN_IO 0x100
+#define PCIBIOS_MIN_MEM 0x100000
+
+#define pcibios_assign_all_busses()	1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ARC_PCI_H */
diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h
new file mode 100644
index 000000000..d5719a260
--- /dev/null
+++ b/arch/arc/include/asm/perf_event.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Linux performance counter support for ARC
+ *
+ * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2011-2013 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_PERF_EVENT_H
+#define __ASM_PERF_EVENT_H
+
+/* Max number of counters that PCT block may ever have */
+#define ARC_PERF_MAX_COUNTERS	32
+
+#define ARC_REG_CC_BUILD	0xF6
+#define ARC_REG_CC_INDEX	0x240
+#define ARC_REG_CC_NAME0	0x241
+#define ARC_REG_CC_NAME1	0x242
+
+#define ARC_REG_PCT_BUILD	0xF5
+#define ARC_REG_PCT_COUNTL	0x250
+#define ARC_REG_PCT_COUNTH	0x251
+#define ARC_REG_PCT_SNAPL	0x252
+#define ARC_REG_PCT_SNAPH	0x253
+#define ARC_REG_PCT_CONFIG	0x254
+#define ARC_REG_PCT_CONTROL	0x255
+#define ARC_REG_PCT_INDEX	0x256
+#define ARC_REG_PCT_INT_CNTL	0x25C
+#define ARC_REG_PCT_INT_CNTH	0x25D
+#define ARC_REG_PCT_INT_CTRL	0x25E
+#define ARC_REG_PCT_INT_ACT	0x25F
+
+#define ARC_REG_PCT_CONFIG_USER	(1 << 18)	/* count in user mode */
+#define ARC_REG_PCT_CONFIG_KERN	(1 << 19)	/* count in kernel mode */
+
+#define ARC_REG_PCT_CONTROL_CC	(1 << 16)	/* clear counts */
+#define ARC_REG_PCT_CONTROL_SN	(1 << 17)	/* snapshot */
+
+struct arc_reg_pct_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int m:8, c:8, r:5, i:1, s:2, v:8;
+#else
+	unsigned int v:8, s:2, i:1, r:5, c:8, m:8;
+#endif
+};
+
+struct arc_reg_cc_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int c:16, r:8, v:8;
+#else
+	unsigned int v:8, r:8, c:16;
+#endif
+};
+
+#define PERF_COUNT_ARC_DCLM	(PERF_COUNT_HW_MAX + 0)
+#define PERF_COUNT_ARC_DCSM	(PERF_COUNT_HW_MAX + 1)
+#define PERF_COUNT_ARC_ICM	(PERF_COUNT_HW_MAX + 2)
+#define PERF_COUNT_ARC_BPOK	(PERF_COUNT_HW_MAX + 3)
+#define PERF_COUNT_ARC_EDTLB	(PERF_COUNT_HW_MAX + 4)
+#define PERF_COUNT_ARC_EITLB	(PERF_COUNT_HW_MAX + 5)
+#define PERF_COUNT_ARC_LDC	(PERF_COUNT_HW_MAX + 6)
+#define PERF_COUNT_ARC_STC	(PERF_COUNT_HW_MAX + 7)
+
+#define PERF_COUNT_ARC_HW_MAX	(PERF_COUNT_HW_MAX + 8)
+
+#ifdef CONFIG_PERF_EVENTS
+#define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs
+#endif
+
+#endif /* __ASM_PERF_EVENT_H */
diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h
new file mode 100644
index 000000000..096b8ef58
--- /dev/null
+++ b/arch/arc/include/asm/pgalloc.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * vineetg: June 2011
+ *  -"/proc/meminfo | grep PageTables" kept on increasing
+ *   Recently added pgtable dtor was not getting called.
+ *
+ * vineetg: May 2011
+ *  -Variable pg-sz means that Page Tables could be variable sized themselves
+ *    So calculate it based on addr traversal split [pgd-bits:pte-bits:xxx]
+ *  -Page Table size capped to max 1 to save memory - hence verified.
+ *  -Since these deal with constants, gcc compile-time optimizes them.
+ *
+ * vineetg: Nov 2010
+ *  -Added pgtable ctor/dtor used for pgtable mem accounting
+ *
+ * vineetg: April 2010
+ *  -Switched pgtable_t from being struct page * to unsigned long
+ *      =Needed so that Page Table allocator (pte_alloc_one) is not forced to
+ *       deal with struct page. That way in future we can make it allocate
+ *       multiple PG Tbls in one Page Frame
+ *      =sweet side effect is avoiding calls to ugly page_address( ) from the
+ *       pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate)
+ *
+ *  Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_PGALLOC_H
+#define _ASM_ARC_PGALLOC_H
+
+#include <linux/mm.h>
+#include <linux/log2.h>
+#include <asm-generic/pgalloc.h>
+
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+	/*
+	 * The cast to long below is OK in 32-bit PAE40 regime with long long pte
+	 * Despite "wider" pte, the pte table needs to be in non-PAE low memory
+	 * as all higher levels can only hold long pointers.
+	 *
+	 * The cast itself is needed given simplistic definition of set_pmd()
+	 */
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_page)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte_page)));
+}
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *ret = (pgd_t *) __get_free_page(GFP_KERNEL);
+
+	if (ret) {
+		int num, num2;
+		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
+		memzero(ret, num * sizeof(pgd_t));
+
+		num2 = VMALLOC_SIZE / PGDIR_SIZE;
+		memcpy(ret + num, swapper_pg_dir + num, num2 * sizeof(pgd_t));
+
+		memzero(ret + num + num2,
+			       (PTRS_PER_PGD - num - num2) * sizeof(pgd_t));
+
+	}
+	return ret;
+}
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
+static inline void p4d_populate(struct mm_struct *mm, p4d_t *p4dp, pud_t *pudp)
+{
+	set_p4d(p4dp, __p4d((unsigned long)pudp));
+}
+
+#define __pud_free_tlb(tlb, pmd, addr)  pud_free((tlb)->mm, pmd)
+
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmdp)
+{
+	set_pud(pudp, __pud((unsigned long)pmdp));
+}
+
+#define __pmd_free_tlb(tlb, pmd, addr)  pmd_free((tlb)->mm, pmd)
+
+#endif
+
+#define __pte_free_tlb(tlb, pte, addr)  pte_free((tlb)->mm, pte)
+
+#endif /* _ASM_ARC_PGALLOC_H */
diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h
new file mode 100644
index 000000000..b23be5574
--- /dev/null
+++ b/arch/arc/include/asm/pgtable-bits-arcv2.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * page table flags for software walked/managed MMUv3 (ARC700) and MMUv4 (HS)
+ * There correspond to the corresponding bits in the TLB
+ */
+
+#ifndef _ASM_ARC_PGTABLE_BITS_ARCV2_H
+#define _ASM_ARC_PGTABLE_BITS_ARCV2_H
+
+#ifdef CONFIG_ARC_CACHE_PAGES
+#define _PAGE_CACHEABLE		(1 << 0)  /* Cached (H) */
+#else
+#define _PAGE_CACHEABLE		0
+#endif
+
+#define _PAGE_EXECUTE		(1 << 1)  /* User Execute  (H) */
+#define _PAGE_WRITE		(1 << 2)  /* User Write    (H) */
+#define _PAGE_READ		(1 << 3)  /* User Read     (H) */
+#define _PAGE_ACCESSED		(1 << 4)  /* Accessed      (s) */
+#define _PAGE_DIRTY		(1 << 5)  /* Modified      (s) */
+#define _PAGE_SPECIAL		(1 << 6)
+#define _PAGE_GLOBAL		(1 << 8)  /* ASID agnostic (H) */
+#define _PAGE_PRESENT		(1 << 9)  /* PTE/TLB Valid (H) */
+
+#ifdef CONFIG_ARC_MMU_V4
+#define _PAGE_HW_SZ		(1 << 10)  /* Normal/super (H) */
+#else
+#define _PAGE_HW_SZ		0
+#endif
+
+/* Defaults for every user page */
+#define ___DEF		(_PAGE_PRESENT | _PAGE_CACHEABLE)
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+							   _PAGE_SPECIAL)
+
+/* More Abbrevaited helpers */
+#define PAGE_U_NONE     __pgprot(___DEF)
+#define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
+#define PAGE_U_W_R      __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE)
+#define PAGE_U_X_R      __pgprot(___DEF | _PAGE_READ | _PAGE_EXECUTE)
+#define PAGE_U_X_W_R    __pgprot(___DEF \
+				| _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE)
+#define PAGE_KERNEL     __pgprot(___DEF | _PAGE_GLOBAL \
+				| _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE)
+
+#define PAGE_SHARED	PAGE_U_W_R
+
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
+
+/*
+ * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
+ *
+ * Certain cases have 1:1 mapping
+ *  e.g. __P101 means VM_READ, VM_EXEC and !VM_SHARED
+ *       which directly corresponds to  PAGE_U_X_R
+ *
+ * Other rules which cause the divergence from 1:1 mapping
+ *
+ *  1. Although ARC700 can do exclusive execute/write protection (meaning R
+ *     can be tracked independet of X/W unlike some other CPUs), still to
+ *     keep things consistent with other archs:
+ *      -Write implies Read:   W => R
+ *      -Execute implies Read: X => R
+ *
+ *  2. Pvt Writable doesn't have Write Enabled initially: Pvt-W => !W
+ *     This is to enable COW mechanism
+ */
+	/* xwr */
+#ifndef __ASSEMBLY__
+
+#define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
+#define pte_special(pte)	(pte_val(pte) & _PAGE_SPECIAL)
+
+#define PTE_BIT_FUNC(fn, op) \
+	static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(mknotpresent,     &= ~(_PAGE_PRESENT));
+PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
+PTE_BIT_FUNC(mkwrite,	|= (_PAGE_WRITE));
+PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_DIRTY));
+PTE_BIT_FUNC(mkdirty,	|= (_PAGE_DIRTY));
+PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
+PTE_BIT_FUNC(mkyoung,	|= (_PAGE_ACCESSED));
+PTE_BIT_FUNC(mkspecial,	|= (_PAGE_SPECIAL));
+PTE_BIT_FUNC(mkhuge,	|= (_PAGE_HW_SZ));
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval)
+{
+	set_pte(ptep, pteval);
+}
+
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
+		      pte_t *ptep);
+
+/* Encode swap {type,off} tuple into PTE
+ * We reserve 13 bits for 5-bit @type, keeping bits 12-5 zero, ensuring that
+ * PAGE_PRESENT is zero in a PTE holding swap "identifier"
+ */
+#define __swp_entry(type, off)		((swp_entry_t) \
+					{ ((type) & 0x1f) | ((off) << 13) })
+
+/* Decode a PTE containing swap "identifier "into constituents */
+#define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
+#define __swp_offset(pte_lookalike)	((pte_lookalike).val >> 13)
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define kern_addr_valid(addr)	(1)
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#include <asm/hugepage.h>
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h
new file mode 100644
index 000000000..ef68758b6
--- /dev/null
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Helpers for implemenintg paging levels
+ */
+
+#ifndef _ASM_ARC_PGTABLE_LEVELS_H
+#define _ASM_ARC_PGTABLE_LEVELS_H
+
+#if CONFIG_PGTABLE_LEVELS == 2
+
+/*
+ * 2 level paging setup for software walked MMUv3 (ARC700) and MMUv4 (HS)
+ *
+ * [31]            32 bit virtual address              [0]
+ * -------------------------------------------------------
+ * |               | <---------- PGDIR_SHIFT ----------> |
+ * |               |                | <-- PAGE_SHIFT --> |
+ * -------------------------------------------------------
+ *       |                  |                |
+ *       |                  |                --> off in page frame
+ *       |                  ---> index into Page Table
+ *       ----> index into Page Directory
+ *
+ * Given software walk, the vaddr split is arbitrary set to 11:8:13
+ * However enabling of super page in a 2 level regime pegs PGDIR_SHIFT to
+ * super page size.
+ */
+
+#if defined(CONFIG_ARC_HUGEPAGE_16M)
+#define PGDIR_SHIFT		24
+#elif defined(CONFIG_ARC_HUGEPAGE_2M)
+#define PGDIR_SHIFT		21
+#else
+/*
+ * No Super page case
+ * Default value provides 11:8:13 (8K), 10:10:12 (4K)
+ * Limits imposed by pgtable_t only PAGE_SIZE long
+ * (so 4K page can only have 1K entries: or 10 bits)
+ */
+#ifdef CONFIG_ARC_PAGE_SIZE_4K
+#define PGDIR_SHIFT		22
+#else
+#define PGDIR_SHIFT		21
+#endif
+
+#endif
+
+#else /* CONFIG_PGTABLE_LEVELS != 2 */
+
+/*
+ * A default 3 level paging testing setup in software walked MMU
+ *   MMUv4 (8K page): <4> : <7> : <8> : <13>
+ * A default 4 level paging testing setup in software walked MMU
+ *   MMUv4 (8K page): <4> : <3> : <4> : <8> : <13>
+ */
+#define PGDIR_SHIFT		28
+#if CONFIG_PGTABLE_LEVELS > 3
+#define PUD_SHIFT		25
+#endif
+#if CONFIG_PGTABLE_LEVELS > 2
+#define PMD_SHIFT		21
+#endif
+
+#endif /* CONFIG_PGTABLE_LEVELS */
+
+#define PGDIR_SIZE		BIT(PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE - 1))
+#define PTRS_PER_PGD		BIT(32 - PGDIR_SHIFT)
+
+#if CONFIG_PGTABLE_LEVELS > 3
+#define PUD_SIZE		BIT(PUD_SHIFT)
+#define PUD_MASK		(~(PUD_SIZE - 1))
+#define PTRS_PER_PUD		BIT(PGDIR_SHIFT - PUD_SHIFT)
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+#define PMD_SIZE		BIT(PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE - 1))
+#define PTRS_PER_PMD		BIT(PUD_SHIFT - PMD_SHIFT)
+#endif
+
+#define PTRS_PER_PTE		BIT(PMD_SHIFT - PAGE_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+#if CONFIG_PGTABLE_LEVELS > 3
+#include <asm-generic/pgtable-nop4d.h>
+#elif CONFIG_PGTABLE_LEVELS > 2
+#include <asm-generic/pgtable-nopud.h>
+#else
+#include <asm-generic/pgtable-nopmd.h>
+#endif
+
+/*
+ * 1st level paging: pgd
+ */
+#define pgd_ERROR(e) \
+	pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
+/* In 4 level paging, p4d_* macros work on pgd */
+#define p4d_none(x)		(!p4d_val(x))
+#define p4d_bad(x)		((p4d_val(x) & ~PAGE_MASK))
+#define p4d_present(x)		(p4d_val(x))
+#define p4d_clear(xp)		do { p4d_val(*(xp)) = 0; } while (0)
+#define p4d_pgtable(p4d)	((pud_t *)(p4d_val(p4d) & PAGE_MASK))
+#define p4d_page(p4d)		virt_to_page(p4d_pgtable(p4d))
+#define set_p4d(p4dp, p4d)	(*(p4dp) = p4d)
+
+/*
+ * 2nd level paging: pud
+ */
+#define pud_ERROR(e) \
+	pr_crit("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+
+/*
+ * In 3 level paging, pud_* macros work on pgd
+ * In 4 level paging, pud_* macros work on pud
+ */
+#define pud_none(x)		(!pud_val(x))
+#define pud_bad(x)		((pud_val(x) & ~PAGE_MASK))
+#define pud_present(x)		(pud_val(x))
+#define pud_clear(xp)		do { pud_val(*(xp)) = 0; } while (0)
+#define pud_pgtable(pud)	((pmd_t *)(pud_val(pud) & PAGE_MASK))
+#define pud_page(pud)		virt_to_page(pud_pgtable(pud))
+#define set_pud(pudp, pud)	(*(pudp) = pud)
+
+/*
+ * 3rd level paging: pmd
+ */
+#define pmd_ERROR(e) \
+	pr_crit("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+
+#define pmd_pfn(pmd)		((pmd_val(pmd) & PMD_MASK) >> PAGE_SHIFT)
+#define pfn_pmd(pfn,prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
+
+#endif
+
+/*
+ * Due to the strange way generic pgtable level folding works, the pmd_* macros
+ *  - are valid even for 2 levels (which supposedly only has pgd - pte)
+ *  - behave differently for 2 vs. 3
+ * In 2  level paging        (pgd -> pte), pmd_* macros work on pgd
+ * In 3+ level paging (pgd -> pmd -> pte), pmd_* macros work on pmd
+ */
+#define pmd_none(x)		(!pmd_val(x))
+#define pmd_bad(x)		((pmd_val(x) & ~PAGE_MASK))
+#define pmd_present(x)		(pmd_val(x))
+#define pmd_clear(xp)		do { pmd_val(*(xp)) = 0; } while (0)
+#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
+#define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
+#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+#define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
+
+/*
+ * 4th level paging: pte
+ */
+#define pte_ERROR(e) \
+	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+
+#define pte_none(x)		(!pte_val(x))
+#define pte_present(x)		(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep)	set_pte_at(mm, addr, ptep, __pte(0))
+#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
+#define set_pte(ptep, pte)	((*(ptep)) = (pte))
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+
+#ifdef CONFIG_ISA_ARCV2
+#define pmd_leaf(x)		(pmd_val(x) & _PAGE_HW_SZ)
+#endif
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
new file mode 100644
index 000000000..4cf45a99f
--- /dev/null
+++ b/arch/arc/include/asm/pgtable.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_PGTABLE_H
+#define _ASM_ARC_PGTABLE_H
+
+#include <linux/bits.h>
+
+#include <asm/pgtable-levels.h>
+#include <asm/pgtable-bits-arcv2.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+
+/*
+ * Number of entries a user land program use.
+ * TASK_SIZE is the maximum vaddr that can be used by a userland program.
+ */
+#define	USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+
+#ifndef __ASSEMBLY__
+
+extern char empty_zero_page[PAGE_SIZE];
+#define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
+
+extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
+
+/* to cope with aliasing VIPT cache */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
new file mode 100644
index 000000000..fb844fce1
--- /dev/null
+++ b/arch/arc/include/asm/processor.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * vineetg: March 2009
+ *  -Implemented task_pt_regs( )
+ *
+ * Amit Bhor, Sameer Dhavale, Ashwin Chaugule: Codito Technologies 2004
+ */
+
+#ifndef __ASM_ARC_PROCESSOR_H
+#define __ASM_ARC_PROCESSOR_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/dsp.h>
+#include <asm/fpu.h>
+
+/* Arch specific stuff which needs to be saved per task.
+ * However these items are not so important so as to earn a place in
+ * struct thread_info
+ */
+struct thread_struct {
+	unsigned long ksp;	/* kernel mode stack pointer */
+	unsigned long callee_reg;	/* pointer to callee regs */
+	unsigned long fault_address;	/* dbls as brkpt holder as well */
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	struct dsp_callee_regs dsp;
+#endif
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+	struct arc_fpu fpu;
+#endif
+};
+
+#define INIT_THREAD  {                          \
+	.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
+
+/*
+ * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
+ * get optimised away by gcc
+ */
+#define cpu_relax()		barrier()
+
+#define KSTK_EIP(tsk)   (task_pt_regs(tsk)->ret)
+#define KSTK_ESP(tsk)   (task_pt_regs(tsk)->sp)
+
+/*
+ * Where about of Task's sp, fp, blink when it was last seen in kernel mode.
+ * Look in process.c for details of kernel stack layout
+ */
+#define TSK_K_ESP(tsk)		(tsk->thread.ksp)
+
+#define TSK_K_REG(tsk, off)	(*((unsigned long *)(TSK_K_ESP(tsk) + \
+					sizeof(struct callee_regs) + off)))
+
+#define TSK_K_BLINK(tsk)	TSK_K_REG(tsk, 4)
+#define TSK_K_FP(tsk)		TSK_K_REG(tsk, 0)
+
+extern void start_thread(struct pt_regs * regs, unsigned long pc,
+			 unsigned long usp);
+
+extern unsigned int __get_wchan(struct task_struct *p);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Default System Memory Map on ARC
+ *
+ * ---------------------------- (lower 2G, Translated) -------------------------
+ * 0x0000_0000		0x5FFF_FFFF	(user vaddr: TASK_SIZE)
+ * 0x6000_0000		0x6FFF_FFFF	(reserved gutter between U/K)
+ * 0x7000_0000		0x7FFF_FFFF	(kvaddr: vmalloc/modules/pkmap..)
+ *
+ * PAGE_OFFSET ---------------- (Upper 2G, Untranslated) -----------------------
+ * 0x8000_0000		0xBFFF_FFFF	(kernel direct mapped)
+ * 0xC000_0000		0xFFFF_FFFF	(peripheral uncached space)
+ * -----------------------------------------------------------------------------
+ */
+
+#define TASK_SIZE	0x60000000
+
+#define VMALLOC_START	(PAGE_OFFSET - (CONFIG_ARC_KVADDR_SIZE << 20))
+
+/* 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter (see asm/highmem.h) */
+#define VMALLOC_SIZE	((CONFIG_ARC_KVADDR_SIZE << 20) - PMD_SIZE * 4)
+
+#define VMALLOC_END	(VMALLOC_START + VMALLOC_SIZE)
+
+#define USER_KERNEL_GUTTER    (VMALLOC_START - TASK_SIZE)
+
+#define STACK_TOP       TASK_SIZE
+#define STACK_TOP_MAX   STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE      (TASK_SIZE / 3)
+
+#endif /* __ASM_ARC_PROCESSOR_H */
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
new file mode 100644
index 000000000..5869a74c0
--- /dev/null
+++ b/arch/arc/include/asm/ptrace.h
@@ -0,0 +1,186 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+#ifndef __ASM_ARC_PTRACE_H
+#define __ASM_ARC_PTRACE_H
+
+#include <uapi/asm/ptrace.h>
+#include <linux/compiler.h>
+
+#ifndef __ASSEMBLY__
+
+/* THE pt_regs: Defines how regs are saved during entry into kernel */
+
+#ifdef CONFIG_ISA_ARCOMPACT
+struct pt_regs {
+
+	/* Real registers */
+	unsigned long bta;	/* bta_l1, bta_l2, erbta */
+
+	unsigned long lp_start, lp_end, lp_count;
+
+	unsigned long status32;	/* status32_l1, status32_l2, erstatus */
+	unsigned long ret;	/* ilink1, ilink2 or eret */
+	unsigned long blink;
+	unsigned long fp;
+	unsigned long r26;	/* gp */
+
+	unsigned long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
+
+	unsigned long sp;	/* User/Kernel depending on where we came from */
+	unsigned long orig_r0;
+
+	/*
+	 * To distinguish bet excp, syscall, irq
+	 * For traps and exceptions, Exception Cause Register.
+	 * 	ECR: <00> <VV> <CC> <PP>
+	 * 	Last word used by Linux for extra state mgmt (syscall-restart)
+	 * For interrupts, use artificial ECR values to note current prio-level
+	 */
+	union {
+		struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+			unsigned long state:8, ecr_vec:8,
+				      ecr_cause:8, ecr_param:8;
+#else
+			unsigned long ecr_param:8, ecr_cause:8,
+				      ecr_vec:8, state:8;
+#endif
+		};
+		unsigned long event;
+	};
+
+	unsigned long user_r25;
+};
+
+#define MAX_REG_OFFSET offsetof(struct pt_regs, user_r25)
+
+#else
+
+struct pt_regs {
+
+	unsigned long orig_r0;
+
+	union {
+		struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+			unsigned long state:8, ecr_vec:8,
+				      ecr_cause:8, ecr_param:8;
+#else
+			unsigned long ecr_param:8, ecr_cause:8,
+				      ecr_vec:8, state:8;
+#endif
+		};
+		unsigned long event;
+	};
+
+	unsigned long bta;	/* bta_l1, bta_l2, erbta */
+
+	unsigned long user_r25;
+
+	unsigned long r26;	/* gp */
+	unsigned long fp;
+	unsigned long sp;	/* user/kernel sp depending on where we came from  */
+
+	unsigned long r12, r30;
+
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	unsigned long r58, r59;	/* ACCL/ACCH used by FPU / DSP MPY */
+#endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	unsigned long DSP_CTRL;
+#endif
+
+	/*------- Below list auto saved by h/w -----------*/
+	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
+
+	unsigned long blink;
+	unsigned long lp_end, lp_start, lp_count;
+
+	unsigned long ei, ldi, jli;
+
+	unsigned long ret;
+	unsigned long status32;
+};
+
+#define MAX_REG_OFFSET offsetof(struct pt_regs, status32)
+
+#endif
+
+/* Callee saved registers - need to be saved only when you are scheduled out */
+
+struct callee_regs {
+	unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
+};
+
+#define instruction_pointer(regs)	((regs)->ret)
+#define profile_pc(regs)		instruction_pointer(regs)
+
+/* return 1 if user mode or 0 if kernel mode */
+#define user_mode(regs) (regs->status32 & STATUS_U_MASK)
+
+#define user_stack_pointer(regs)\
+({  unsigned int sp;		\
+	if (user_mode(regs))	\
+		sp = (regs)->sp;\
+	else			\
+		sp = -1;	\
+	sp;			\
+})
+
+/* return 1 if PC in delay slot */
+#define delay_mode(regs) ((regs->status32 & STATUS_DE_MASK) == STATUS_DE_MASK)
+
+#define in_syscall(regs)    ((regs->ecr_vec == ECR_V_TRAP) && !regs->ecr_param)
+#define in_brkpt_trap(regs) ((regs->ecr_vec == ECR_V_TRAP) && regs->ecr_param)
+
+#define STATE_SCALL_RESTARTED	0x01
+
+#define syscall_wont_restart(reg) (reg->state |= STATE_SCALL_RESTARTED)
+#define syscall_restartable(reg) !(reg->state &  STATE_SCALL_RESTARTED)
+
+#define current_pt_regs()					\
+({								\
+	/* open-coded current_thread_info() */			\
+	register unsigned long sp asm ("sp");			\
+	unsigned long pg_start = (sp & ~(THREAD_SIZE - 1));	\
+	(struct pt_regs *)(pg_start + THREAD_SIZE) - 1;	\
+})
+
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	return (long)regs->r0;
+}
+
+static inline void instruction_pointer_set(struct pt_regs *regs,
+					   unsigned long val)
+{
+	instruction_pointer(regs) = val;
+}
+
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->sp;
+}
+
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_PTRACE_H */
diff --git a/arch/arc/include/asm/sections.h b/arch/arc/include/asm/sections.h
new file mode 100644
index 000000000..860b4fd67
--- /dev/null
+++ b/arch/arc/include/asm/sections.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_SECTIONS_H
+#define _ASM_ARC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char __arc_dccm_base[];
+
+#endif
diff --git a/arch/arc/include/asm/serial.h b/arch/arc/include/asm/serial.h
new file mode 100644
index 000000000..83062c8b9
--- /dev/null
+++ b/arch/arc/include/asm/serial.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_SERIAL_H
+#define _ASM_ARC_SERIAL_H
+
+/*
+ * early 8250 (now earlycon) requires BASE_BAUD to be defined in this header.
+ * However to still determine it dynamically (for multi-platform images)
+ * we do this in a helper by parsing the FDT early
+ */
+
+extern unsigned int __init arc_early_base_baud(void);
+
+#define BASE_BAUD	arc_early_base_baud()
+
+#endif /* _ASM_ARC_SERIAL_H */
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
new file mode 100644
index 000000000..028a8cf76
--- /dev/null
+++ b/arch/arc/include/asm/setup.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+#ifndef __ASM_ARC_SETUP_H
+#define __ASM_ARC_SETUP_H
+
+
+#include <linux/types.h>
+#include <uapi/asm/setup.h>
+
+#define COMMAND_LINE_SIZE 256
+
+/*
+ * Data structure to map a ID to string
+ * Used a lot for bootup reporting of hardware diversity
+ */
+struct id_to_str {
+	int id;
+	const char *str;
+};
+
+extern int root_mountflags, end_mem;
+
+void setup_processor(void);
+void __init setup_arch_memory(void);
+long __init arc_get_mem_sz(void);
+
+/* Helpers used in arc_*_mumbojumbo routines */
+#define IS_AVAIL1(v, s)		((v) ? s : "")
+#define IS_DISABLED_RUN(v)	((v) ? "" : "(disabled) ")
+#define IS_USED_RUN(v)		((v) ? "" : "(not used) ")
+#define IS_USED_CFG(cfg)	IS_USED_RUN(IS_ENABLED(cfg))
+#define IS_AVAIL2(v, s, cfg)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
+#define IS_AVAIL3(v, v2, s)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_DISABLED_RUN(v2))
+
+extern void arc_mmu_init(void);
+extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
+extern void read_decode_mmu_bcr(void);
+
+extern void arc_cache_init(void);
+extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
+extern void read_decode_cache_bcr(void);
+
+#endif /* __ASMARC_SETUP_H */
diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h
new file mode 100644
index 000000000..8b0251464
--- /dev/null
+++ b/arch/arc/include/asm/shmparam.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ARC_ASM_SHMPARAM_H
+#define __ARC_ASM_SHMPARAM_H
+
+/* Handle upto 2 cache bins */
+#define	SHMLBA	(2 * PAGE_SIZE)
+
+/* Enforce SHMLBA in shmat */
+#define __ARCH_FORCE_SHMLBA
+
+#endif
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
new file mode 100644
index 000000000..d85649160
--- /dev/null
+++ b/arch/arc/include/asm/smp.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_ARC_SMP_H
+#define __ASM_ARC_SMP_H
+
+#ifdef CONFIG_SMP
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+/* including cpumask.h leads to cyclic deps hence this Forward declaration */
+struct cpumask;
+
+/*
+ * APIs provided by arch SMP code to generic code
+ */
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+/*
+ * APIs provided by arch SMP code to rest of arch code
+ */
+extern void __init smp_init_cpus(void);
+extern void first_lines_of_secondary(void);
+extern const char *arc_platform_smp_cpuinfo(void);
+
+/*
+ * API expected BY platform smp code (FROM arch smp code)
+ *
+ * smp_ipi_irq_setup:
+ *	Takes @cpu and @hwirq to which the arch-common ISR is hooked up
+ */
+extern int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq);
+
+/*
+ * struct plat_smp_ops	- SMP callbacks provided by platform to ARC SMP
+ *
+ * @info:		SoC SMP specific info for /proc/cpuinfo etc
+ * @init_early_smp:	A SMP specific h/w block can init itself
+ * 			Could be common across platforms so not covered by
+ * 			mach_desc->init_early()
+ * @init_per_cpu:	Called for each core so SMP h/w block driver can do
+ * 			any needed setup per cpu (e.g. IPI request)
+ * @cpu_kick:		For Master to kickstart a cpu (optionally at a PC)
+ * @ipi_send:		To send IPI to a @cpu
+ * @ips_clear:		To clear IPI received at @irq
+ */
+struct plat_smp_ops {
+	const char 	*info;
+	void		(*init_early_smp)(void);
+	void		(*init_per_cpu)(int cpu);
+	void		(*cpu_kick)(int cpu, unsigned long pc);
+	void		(*ipi_send)(int cpu);
+	void		(*ipi_clear)(int irq);
+};
+
+/* TBD: stop exporting it for direct population by platform */
+extern struct plat_smp_ops  plat_smp_ops;
+
+#else /* CONFIG_SMP */
+
+static inline void smp_init_cpus(void) {}
+static inline const char *arc_platform_smp_cpuinfo(void)
+{
+	return "";
+}
+
+#endif  /* !CONFIG_SMP */
+
+/*
+ * ARC700 doesn't support atomic Read-Modify-Write ops.
+ * Originally Interrupts had to be disabled around code to gaurantee atomicity.
+ * The LLOCK/SCOND insns allow writing interrupt-hassle-free based atomic ops
+ * based on retry-if-irq-in-atomic (with hardware assist).
+ * However despite these, we provide the IRQ disabling variant
+ *
+ * (1) These insn were introduced only in 4.10 release. So for older released
+ *	support needed.
+ *
+ * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be
+ *	gaurantted by the platform (not something which core handles).
+ *	Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
+ *	disabling for atomicity.
+ *
+ *	However exported spinlock API is not usable due to cyclic hdr deps
+ *	(even after system.h disintegration upstream)
+ *	asm/bitops.h -> linux/spinlock.h -> linux/preempt.h
+ *		-> linux/thread_info.h -> linux/bitops.h -> asm/bitops.h
+ *
+ *	So the workaround is to use the lowest level arch spinlock API.
+ *	The exported spinlock API is smart enough to be NOP for !CONFIG_SMP,
+ *	but same is not true for ARCH backend, hence the need for 2 variants
+ */
+#ifndef CONFIG_ARC_HAS_LLSC
+
+#include <linux/irqflags.h>
+#ifdef CONFIG_SMP
+
+#include <asm/spinlock.h>
+
+extern arch_spinlock_t smp_atomic_ops_lock;
+
+#define atomic_ops_lock(flags)	do {		\
+	local_irq_save(flags);			\
+	arch_spin_lock(&smp_atomic_ops_lock);	\
+} while (0)
+
+#define atomic_ops_unlock(flags) do {		\
+	arch_spin_unlock(&smp_atomic_ops_lock);	\
+	local_irq_restore(flags);		\
+} while (0)
+
+#else /* !CONFIG_SMP */
+
+#define atomic_ops_lock(flags)		local_irq_save(flags)
+#define atomic_ops_unlock(flags)	local_irq_restore(flags)
+
+#endif /* !CONFIG_SMP */
+
+#endif	/* !CONFIG_ARC_HAS_LLSC */
+
+#endif
diff --git a/arch/arc/include/asm/spinlock.h b/arch/arc/include/asm/spinlock.h
new file mode 100644
index 000000000..192871608
--- /dev/null
+++ b/arch/arc/include/asm/spinlock.h
@@ -0,0 +1,382 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/spinlock_types.h>
+#include <asm/processor.h>
+#include <asm/barrier.h>
+
+#define arch_spin_is_locked(x)	((x)->slock != __ARCH_SPIN_LOCK_UNLOCKED__)
+
+#ifdef CONFIG_ARC_HAS_LLSC
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	unsigned int val;
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[slock]]	\n"
+	"	breq	%[val], %[LOCKED], 1b	\n"	/* spin while LOCKED */
+	"	scond	%[LOCKED], [%[slock]]	\n"	/* acquire */
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [slock]	"r"	(&(lock->slock)),
+	  [LOCKED]	"r"	(__ARCH_SPIN_LOCK_LOCKED__)
+	: "memory", "cc");
+
+	/*
+	 * ACQUIRE barrier to ensure load/store after taking the lock
+	 * don't "bleed-up" out of the critical section (leak-in is allowed)
+	 * http://www.spinics.net/lists/kernel/msg2010409.html
+	 *
+	 * ARCv2 only has load-load, store-store and all-all barrier
+	 * thus need the full all-all barrier
+	 */
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	unsigned int val, got_it = 0;
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[slock]]	\n"
+	"	breq	%[val], %[LOCKED], 4f	\n"	/* already LOCKED, just bail */
+	"	scond	%[LOCKED], [%[slock]]	\n"	/* acquire */
+	"	bnz	1b			\n"
+	"	mov	%[got_it], 1		\n"
+	"4:					\n"
+	"					\n"
+	: [val]		"=&r"	(val),
+	  [got_it]	"+&r"	(got_it)
+	: [slock]	"r"	(&(lock->slock)),
+	  [LOCKED]	"r"	(__ARCH_SPIN_LOCK_LOCKED__)
+	: "memory", "cc");
+
+	smp_mb();
+
+	return got_it;
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	smp_mb();
+
+	WRITE_ONCE(lock->slock, __ARCH_SPIN_LOCK_UNLOCKED__);
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ * Unfair locking as Writers could be starved indefinitely by Reader(s)
+ */
+
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+
+	/*
+	 * zero means writer holds the lock exclusively, deny Reader.
+	 * Otherwise grant lock to first/subseq reader
+	 *
+	 * 	if (rw->counter > 0) {
+	 *		rw->counter--;
+	 *		ret = 1;
+	 *	}
+	 */
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brls	%[val], %[WR_LOCKED], 1b\n"	/* <= 0: spin while write locked */
+	"	sub	%[val], %[val], 1	\n"	/* reader lock */
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_read_trylock(arch_rwlock_t *rw)
+{
+	unsigned int val, got_it = 0;
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brls	%[val], %[WR_LOCKED], 4f\n"	/* <= 0: already write locked, bail */
+	"	sub	%[val], %[val], 1	\n"	/* counter-- */
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"	/* retry if collided with someone */
+	"	mov	%[got_it], 1		\n"
+	"					\n"
+	"4: ; --- done ---			\n"
+
+	: [val]		"=&r"	(val),
+	  [got_it]	"+&r"	(got_it)
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+
+	return got_it;
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+
+	/*
+	 * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
+	 * deny writer. Otherwise if unlocked grant to writer
+	 * Hence the claim that Linux rwlocks are unfair to writers.
+	 * (can be starved for an indefinite time by readers).
+	 *
+	 *	if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
+	 *		rw->counter = 0;
+	 *		ret = 1;
+	 *	}
+	 */
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brne	%[val], %[UNLOCKED], 1b	\n"	/* while !UNLOCKED spin */
+	"	mov	%[val], %[WR_LOCKED]	\n"
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [UNLOCKED]	"ir"	(__ARCH_RW_LOCK_UNLOCKED__),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	unsigned int val, got_it = 0;
+
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	brne	%[val], %[UNLOCKED], 4f	\n"	/* !UNLOCKED, bail */
+	"	mov	%[val], %[WR_LOCKED]	\n"
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"	/* retry if collided with someone */
+	"	mov	%[got_it], 1		\n"
+	"					\n"
+	"4: ; --- done ---			\n"
+
+	: [val]		"=&r"	(val),
+	  [got_it]	"+&r"	(got_it)
+	: [rwlock]	"r"	(&(rw->counter)),
+	  [UNLOCKED]	"ir"	(__ARCH_RW_LOCK_UNLOCKED__),
+	  [WR_LOCKED]	"ir"	(0)
+	: "memory", "cc");
+
+	smp_mb();
+
+	return got_it;
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+	unsigned int val;
+
+	smp_mb();
+
+	/*
+	 * rw->counter++;
+	 */
+	__asm__ __volatile__(
+	"1:	llock	%[val], [%[rwlock]]	\n"
+	"	add	%[val], %[val], 1	\n"
+	"	scond	%[val], [%[rwlock]]	\n"
+	"	bnz	1b			\n"
+	"					\n"
+	: [val]		"=&r"	(val)
+	: [rwlock]	"r"	(&(rw->counter))
+	: "memory", "cc");
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+	smp_mb();
+
+	WRITE_ONCE(rw->counter, __ARCH_RW_LOCK_UNLOCKED__);
+}
+
+#else	/* !CONFIG_ARC_HAS_LLSC */
+
+static inline void arch_spin_lock(arch_spinlock_t *lock)
+{
+	unsigned int val = __ARCH_SPIN_LOCK_LOCKED__;
+
+	/*
+	 * Per lkmm, smp_mb() is only required after _lock (and before_unlock)
+	 * for ACQ and REL semantics respectively. However EX based spinlocks
+	 * need the extra smp_mb to workaround a hardware quirk.
+	 */
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	ex  %0, [%1]		\n"
+	"	breq  %0, %2, 1b	\n"
+	: "+&r" (val)
+	: "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__)
+	: "memory");
+
+	smp_mb();
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	unsigned int val = __ARCH_SPIN_LOCK_LOCKED__;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	ex  %0, [%1]		\n"
+	: "+r" (val)
+	: "r"(&(lock->slock))
+	: "memory");
+
+	smp_mb();
+
+	return (val == __ARCH_SPIN_LOCK_UNLOCKED__);
+}
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	unsigned int val = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	/*
+	 * RELEASE barrier: given the instructions avail on ARCv2, full barrier
+	 * is the only option
+	 */
+	smp_mb();
+
+	/*
+	 * EX is not really required here, a simple STore of 0 suffices.
+	 * However this causes tasklist livelocks in SystemC based SMP virtual
+	 * platforms where the systemc core scheduler uses EX as a cue for
+	 * moving to next core. Do a git log of this file for details
+	 */
+	__asm__ __volatile__(
+	"	ex  %0, [%1]		\n"
+	: "+r" (val)
+	: "r"(&(lock->slock))
+	: "memory");
+
+	/*
+	 * see pairing version/comment in arch_spin_lock above
+	 */
+	smp_mb();
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ * Unfair locking as Writers could be starved indefinitely by Reader(s)
+ *
+ * The spinlock itself is contained in @counter and access to it is
+ * serialized with @lock_mutex.
+ */
+
+/* 1 - lock taken successfully */
+static inline int arch_read_trylock(arch_rwlock_t *rw)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	arch_spin_lock(&(rw->lock_mutex));
+
+	/*
+	 * zero means writer holds the lock exclusively, deny Reader.
+	 * Otherwise grant lock to first/subseq reader
+	 */
+	if (rw->counter > 0) {
+		rw->counter--;
+		ret = 1;
+	}
+
+	arch_spin_unlock(&(rw->lock_mutex));
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+/* 1 - lock taken successfully */
+static inline int arch_write_trylock(arch_rwlock_t *rw)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	arch_spin_lock(&(rw->lock_mutex));
+
+	/*
+	 * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
+	 * deny writer. Otherwise if unlocked grant to writer
+	 * Hence the claim that Linux rwlocks are unfair to writers.
+	 * (can be starved for an indefinite time by readers).
+	 */
+	if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
+		rw->counter = 0;
+		ret = 1;
+	}
+	arch_spin_unlock(&(rw->lock_mutex));
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline void arch_read_lock(arch_rwlock_t *rw)
+{
+	while (!arch_read_trylock(rw))
+		cpu_relax();
+}
+
+static inline void arch_write_lock(arch_rwlock_t *rw)
+{
+	while (!arch_write_trylock(rw))
+		cpu_relax();
+}
+
+static inline void arch_read_unlock(arch_rwlock_t *rw)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	arch_spin_lock(&(rw->lock_mutex));
+	rw->counter++;
+	arch_spin_unlock(&(rw->lock_mutex));
+	local_irq_restore(flags);
+}
+
+static inline void arch_write_unlock(arch_rwlock_t *rw)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	arch_spin_lock(&(rw->lock_mutex));
+	rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
+	arch_spin_unlock(&(rw->lock_mutex));
+	local_irq_restore(flags);
+}
+
+#endif
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/arc/include/asm/spinlock_types.h b/arch/arc/include/asm/spinlock_types.h
new file mode 100644
index 000000000..7cd037399
--- /dev/null
+++ b/arch/arc/include/asm/spinlock_types.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+typedef struct {
+	volatile unsigned int slock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED__	0
+#define __ARCH_SPIN_LOCK_LOCKED__	1
+
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ __ARCH_SPIN_LOCK_UNLOCKED__ }
+#define __ARCH_SPIN_LOCK_LOCKED		{ __ARCH_SPIN_LOCK_LOCKED__ }
+
+/*
+ * Unlocked     : 0x0100_0000
+ * Read lock(s) : 0x00FF_FFFF to 0x01  (Multiple Readers decrement it)
+ * Write lock   : 0x0, but only if prior value is "unlocked" 0x0100_0000
+ */
+typedef struct {
+	volatile unsigned int	counter;
+#ifndef CONFIG_ARC_HAS_LLSC
+	arch_spinlock_t		lock_mutex;
+#endif
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED__	0x01000000
+#define __ARCH_RW_LOCK_UNLOCKED		{ .counter = __ARCH_RW_LOCK_UNLOCKED__ }
+
+#endif
diff --git a/arch/arc/include/asm/stacktrace.h b/arch/arc/include/asm/stacktrace.h
new file mode 100644
index 000000000..4c50fb003
--- /dev/null
+++ b/arch/arc/include/asm/stacktrace.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_STACKTRACE_H
+#define __ASM_STACKTRACE_H
+
+#include <linux/sched.h>
+
+/**
+ * arc_unwind_core - Unwind the kernel mode stack for an execution context
+ * @tsk:		NULL for current task, specific task otherwise
+ * @regs:		pt_regs used to seed the unwinder {SP, FP, BLINK, PC}
+ * 			If NULL, use pt_regs of @tsk (if !NULL) otherwise
+ * 			use the current values of {SP, FP, BLINK, PC}
+ * @consumer_fn:	Callback invoked for each frame unwound
+ * 			Returns 0 to continue unwinding, -1 to stop
+ * @arg:		Arg to callback
+ *
+ * Returns the address of first function in stack
+ *
+ * Semantics:
+ *  - synchronous unwinding (e.g. dump_stack): @tsk  NULL, @regs  NULL
+ *  - Asynchronous unwinding of sleeping task: @tsk !NULL, @regs  NULL
+ *  - Asynchronous unwinding of intr/excp etc: @tsk !NULL, @regs !NULL
+ */
+notrace noinline unsigned int arc_unwind_core(
+	struct task_struct *tsk, struct pt_regs *regs,
+	int (*consumer_fn) (unsigned int, void *),
+	void *arg);
+
+#endif /* __ASM_STACKTRACE_H */
diff --git a/arch/arc/include/asm/string.h b/arch/arc/include/asm/string.h
new file mode 100644
index 000000000..3182ea9dc
--- /dev/null
+++ b/arch/arc/include/asm/string.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * vineetg: May 2011
+ *  -We had half-optimised memset/memcpy, got better versions of those
+ *  -Added memcmp, strchr, strcpy, strcmp, strlen
+ *
+ * Amit Bhor: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_STRING_H
+#define _ASM_ARC_STRING_H
+
+#include <linux/types.h>
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_STRCHR
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRLEN
+
+extern void *memset(void *ptr, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void memzero(void *ptr, __kernel_size_t n);
+extern int memcmp(const void *, const void *, __kernel_size_t);
+extern char *strchr(const char *s, int c);
+extern char *strcpy(char *dest, const char *src);
+extern int strcmp(const char *cs, const char *ct);
+extern __kernel_size_t strlen(const char *);
+
+#endif /* _ASM_ARC_STRING_H */
diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h
new file mode 100644
index 000000000..1f85de828
--- /dev/null
+++ b/arch/arc/include/asm/switch_to.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_SWITCH_TO_H
+#define _ASM_ARC_SWITCH_TO_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <asm/dsp-impl.h>
+#include <asm/fpu.h>
+
+struct task_struct *__switch_to(struct task_struct *p, struct task_struct *n);
+
+#define switch_to(prev, next, last)	\
+do {					\
+	dsp_save_restore(prev, next);	\
+	fpu_save_restore(prev, next);	\
+	last = __switch_to(prev, next);\
+	mb();				\
+} while (0)
+
+#endif
+
+#endif
diff --git a/arch/arc/include/asm/syscall.h b/arch/arc/include/asm/syscall.h
new file mode 100644
index 000000000..9709256e3
--- /dev/null
+++ b/arch/arc/include/asm/syscall.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_SYSCALL_H
+#define _ASM_ARC_SYSCALL_H  1
+
+#include <uapi/linux/audit.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <asm/unistd.h>
+#include <asm/ptrace.h>		/* in_syscall() */
+
+extern void *sys_call_table[];
+
+static inline long
+syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+	if (user_mode(regs) && in_syscall(regs))
+		return regs->r8;
+	else
+		return -1;
+}
+
+static inline void
+syscall_rollback(struct task_struct *task, struct pt_regs *regs)
+{
+	regs->r0 = regs->orig_r0;
+}
+
+static inline long
+syscall_get_error(struct task_struct *task, struct pt_regs *regs)
+{
+	/* 0 if syscall succeeded, otherwise -Errorcode */
+	return IS_ERR_VALUE(regs->r0) ? regs->r0 : 0;
+}
+
+static inline long
+syscall_get_return_value(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
+static inline void
+syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
+			 int error, long val)
+{
+	regs->r0 = (long) error ?: val;
+}
+
+/*
+ * @i:      argument index [0,5]
+ * @n:      number of arguments; n+i must be [1,6].
+ */
+static inline void
+syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
+		      unsigned long *args)
+{
+	unsigned long *inside_ptregs = &(regs->r0);
+	unsigned int n = 6;
+	unsigned int i = 0;
+
+	while (n--) {
+		args[i++] = (*inside_ptregs);
+		inside_ptregs--;
+	}
+}
+
+static inline int
+syscall_get_arch(struct task_struct *task)
+{
+	return IS_ENABLED(CONFIG_ISA_ARCOMPACT)
+		? (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)
+			? AUDIT_ARCH_ARCOMPACTBE : AUDIT_ARCH_ARCOMPACT)
+		: (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)
+			? AUDIT_ARCH_ARCV2BE : AUDIT_ARCH_ARCV2);
+}
+
+#endif
diff --git a/arch/arc/include/asm/syscalls.h b/arch/arc/include/asm/syscalls.h
new file mode 100644
index 000000000..c3f4714a4
--- /dev/null
+++ b/arch/arc/include/asm/syscalls.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_SYSCALLS_H
+#define _ASM_ARC_SYSCALLS_H  1
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+int sys_clone_wrapper(int, int, int, int, int);
+int sys_clone3_wrapper(void *, size_t);
+int sys_cacheflush(uint32_t, uint32_t uint32_t);
+int sys_arc_settls(void *);
+int sys_arc_gettls(void);
+int sys_arc_usr_cmpxchg(int *, int, int);
+
+#include <asm-generic/syscalls.h>
+
+#endif
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h
new file mode 100644
index 000000000..6ba7fe417
--- /dev/null
+++ b/arch/arc/include/asm/thread_info.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Vineetg: Oct 2009
+ *  No need for ARC specific thread_info allocator (kmalloc/free). This is
+ *  anyways one page allocation, thus slab alloc can be short-circuited and
+ *  the generic version (get_free_page) would be loads better.
+ *
+ * Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef CONFIG_16KSTACKS
+#define THREAD_SIZE_ORDER 1
+#else
+#define THREAD_SIZE_ORDER 0
+#endif
+
+#define THREAD_SIZE     (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_SHIFT	(PAGE_SHIFT << THREAD_SIZE_ORDER)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/thread_info.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+struct thread_info {
+	unsigned long flags;		/* low level flags */
+	int preempt_count;		/* 0 => preemptable, <0 => BUG */
+	struct task_struct *task;	/* main task structure */
+	__u32 cpu;			/* current CPU */
+	unsigned long thr_ptr;		/* TLS ptr */
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task       = &tsk,			\
+	.flags      = 0,			\
+	.cpu        = 0,			\
+	.preempt_count  = INIT_PREEMPT_COUNT,	\
+}
+
+static inline __attribute_const__ struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm("sp");
+	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_RESTORE_SIGMASK	0	/* restore sig mask in do_signal() */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SYSCALL_AUDIT	4	/* syscall auditing active */
+#define TIF_NOTIFY_SIGNAL	5	/* signal notifications exist */
+#define TIF_SYSCALL_TRACE	15	/* syscall trace active */
+/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		16
+#define TIF_SYSCALL_TRACEPOINT	17	/* syscall tracepoint instrumentation */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_NOTIFY_SIGNAL	(1<<TIF_NOTIFY_SIGNAL)
+#define _TIF_MEMDIE		(1<<TIF_MEMDIE)
+#define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
+
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT)
+
+/*
+ * _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it.
+ * SYSCALL_TRACE is anyway separately/unconditionally tested right after a
+ * syscall, so all that remains to be tested is _TIF_WORK_MASK
+ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/arc/include/asm/timex.h b/arch/arc/include/asm/timex.h
new file mode 100644
index 000000000..48b3482bc
--- /dev/null
+++ b/arch/arc/include/asm/timex.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_TIMEX_H
+#define _ASM_ARC_TIMEX_H
+
+#define CLOCK_TICK_RATE	80000000 /* slated to be removed */
+
+#include <asm-generic/timex.h>
+
+/* XXX: get_cycles() to be implemented with RTSC insn */
+
+#endif /* _ASM_ARC_TIMEX_H */
diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h
new file mode 100644
index 000000000..975b35d37
--- /dev/null
+++ b/arch/arc/include/asm/tlb.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_TLB_H
+#define _ASM_ARC_TLB_H
+
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_ARC_TLB_H */
diff --git a/arch/arc/include/asm/tlbflush.h b/arch/arc/include/asm/tlbflush.h
new file mode 100644
index 000000000..992a2837a
--- /dev/null
+++ b/arch/arc/include/asm/tlbflush.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_ARC_TLBFLUSH__
+#define __ASM_ARC_TLBFLUSH__
+
+#include <linux/mm.h>
+
+void local_flush_tlb_all(void);
+void local_flush_tlb_mm(struct mm_struct *mm);
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end);
+void local_flush_tlb_range(struct vm_area_struct *vma,
+			   unsigned long start, unsigned long end);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			       unsigned long end);
+#endif
+
+#ifndef CONFIG_SMP
+#define flush_tlb_range(vma, s, e)	local_flush_tlb_range(vma, s, e)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_kernel_range(s, e)	local_flush_tlb_kernel_range(s, e)
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define flush_pmd_tlb_range(vma, s, e)	local_flush_pmd_tlb_range(vma, s, e)
+#endif
+#else
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+							 unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+#endif
+#endif /* CONFIG_SMP */
+#endif
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
new file mode 100644
index 000000000..99712471c
--- /dev/null
+++ b/arch/arc/include/asm/uaccess.h
@@ -0,0 +1,643 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * vineetg: June 2010
+ *    -__clear_user( ) called multiple times during elf load was byte loop
+ *    converted to do as much word clear as possible.
+ *
+ * vineetg: Dec 2009
+ *    -Hand crafted constant propagation for "constant" copy sizes
+ *    -stock kernel shrunk by 33K at -O3
+ *
+ * vineetg: Sept 2009
+ *    -Added option to (UN)inline copy_(to|from)_user to reduce code sz
+ *    -kernel shrunk by 200K even at -O3 (gcc 4.2.1)
+ *    -Enabled when doing -Os
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_UACCESS_H
+#define _ASM_ARC_UACCESS_H
+
+#include <linux/string.h>	/* for generic string functions */
+
+/*********** Single byte/hword/word copies ******************/
+
+#define __get_user_fn(sz, u, k)					\
+({								\
+	long __ret = 0;	/* success by default */	\
+	switch (sz) {						\
+	case 1: __arc_get_user_one(*(k), u, "ldb", __ret); break;	\
+	case 2: __arc_get_user_one(*(k), u, "ldw", __ret); break;	\
+	case 4: __arc_get_user_one(*(k), u, "ld", __ret);  break;	\
+	case 8: __arc_get_user_one_64(*(k), u, __ret);     break;	\
+	}							\
+	__ret;							\
+})
+
+/*
+ * Returns 0 on success, -EFAULT if not.
+ * @ret already contains 0 - given that errors will be less likely
+ * (hence +r asm constraint below).
+ * In case of error, fixup code will make it -EFAULT
+ */
+#define __arc_get_user_one(dst, src, op, ret)	\
+	__asm__ __volatile__(                   \
+	"1:	"op"    %1,[%2]\n"		\
+	"2:	;nop\n"				\
+	"	.section .fixup, \"ax\"\n"	\
+	"	.align 4\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
+	"	j   2b\n"			\
+	"	.previous\n"			\
+	"	.section __ex_table, \"a\"\n"	\
+	"	.align 4\n"			\
+	"	.word 1b,3b\n"			\
+	"	.previous\n"			\
+						\
+	: "+r" (ret), "=r" (dst)		\
+	: "r" (src), "ir" (-EFAULT))
+
+#define __arc_get_user_one_64(dst, src, ret)	\
+	__asm__ __volatile__(                   \
+	"1:	ld   %1,[%2]\n"			\
+	"4:	ld  %R1,[%2, 4]\n"		\
+	"2:	;nop\n"				\
+	"	.section .fixup, \"ax\"\n"	\
+	"	.align 4\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
+	"	mov %R1, 0\n"			\
+	"	j   2b\n"			\
+	"	.previous\n"			\
+	"	.section __ex_table, \"a\"\n"	\
+	"	.align 4\n"			\
+	"	.word 1b,3b\n"			\
+	"	.word 4b,3b\n"			\
+	"	.previous\n"			\
+						\
+	: "+r" (ret), "=r" (dst)		\
+	: "r" (src), "ir" (-EFAULT))
+
+#define __put_user_fn(sz, u, k)					\
+({								\
+	long __ret = 0;	/* success by default */	\
+	switch (sz) {						\
+	case 1: __arc_put_user_one(*(k), u, "stb", __ret); break;	\
+	case 2: __arc_put_user_one(*(k), u, "stw", __ret); break;	\
+	case 4: __arc_put_user_one(*(k), u, "st", __ret);  break;	\
+	case 8: __arc_put_user_one_64(*(k), u, __ret);     break;	\
+	}							\
+	__ret;							\
+})
+
+#define __arc_put_user_one(src, dst, op, ret)	\
+	__asm__ __volatile__(                   \
+	"1:	"op"    %1,[%2]\n"		\
+	"2:	;nop\n"				\
+	"	.section .fixup, \"ax\"\n"	\
+	"	.align 4\n"			\
+	"3:	mov %0, %3\n"			\
+	"	j   2b\n"			\
+	"	.previous\n"			\
+	"	.section __ex_table, \"a\"\n"	\
+	"	.align 4\n"			\
+	"	.word 1b,3b\n"			\
+	"	.previous\n"			\
+						\
+	: "+r" (ret)				\
+	: "r" (src), "r" (dst), "ir" (-EFAULT))
+
+#define __arc_put_user_one_64(src, dst, ret)	\
+	__asm__ __volatile__(                   \
+	"1:	st   %1,[%2]\n"			\
+	"4:	st  %R1,[%2, 4]\n"		\
+	"2:	;nop\n"				\
+	"	.section .fixup, \"ax\"\n"	\
+	"	.align 4\n"			\
+	"3:	mov %0, %3\n"			\
+	"	j   2b\n"			\
+	"	.previous\n"			\
+	"	.section __ex_table, \"a\"\n"	\
+	"	.align 4\n"			\
+	"	.word 1b,3b\n"			\
+	"	.word 4b,3b\n"			\
+	"	.previous\n"			\
+						\
+	: "+r" (ret)				\
+	: "r" (src), "r" (dst), "ir" (-EFAULT))
+
+
+static inline unsigned long
+raw_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	long res = 0;
+	char val;
+	unsigned long tmp1, tmp2, tmp3, tmp4;
+	unsigned long orig_n = n;
+
+	if (n == 0)
+		return 0;
+
+	/* unaligned */
+	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+
+		unsigned char tmp;
+
+		__asm__ __volatile__ (
+		"	mov.f   lp_count, %0		\n"
+		"	lpnz 2f				\n"
+		"1:	ldb.ab  %1, [%3, 1]		\n"
+		"	stb.ab  %1, [%2, 1]		\n"
+		"	sub     %0,%0,1			\n"
+		"2:	;nop				\n"
+		"	.section .fixup, \"ax\"		\n"
+		"	.align 4			\n"
+		"3:	j   2b				\n"
+		"	.previous			\n"
+		"	.section __ex_table, \"a\"	\n"
+		"	.align 4			\n"
+		"	.word   1b, 3b			\n"
+		"	.previous			\n"
+
+		: "+r" (n),
+		/*
+		 * Note as an '&' earlyclobber operand to make sure the
+		 * temporary register inside the loop is not the same as
+		 *  FROM or TO.
+		*/
+		  "=&r" (tmp), "+r" (to), "+r" (from)
+		:
+		: "lp_count", "memory");
+
+		return n;
+	}
+
+	/*
+	 * Hand-crafted constant propagation to reduce code sz of the
+	 * laddered copy 16x,8,4,2,1
+	 */
+	if (__builtin_constant_p(orig_n)) {
+		res = orig_n;
+
+		if (orig_n / 16) {
+			orig_n = orig_n % 16;
+
+			__asm__ __volatile__(
+			"	lsr   lp_count, %7,4		\n"
+			"	lp    3f			\n"
+			"1:	ld.ab   %3, [%2, 4]		\n"
+			"11:	ld.ab   %4, [%2, 4]		\n"
+			"12:	ld.ab   %5, [%2, 4]		\n"
+			"13:	ld.ab   %6, [%2, 4]		\n"
+			"	st.ab   %3, [%1, 4]		\n"
+			"	st.ab   %4, [%1, 4]		\n"
+			"	st.ab   %5, [%1, 4]		\n"
+			"	st.ab   %6, [%1, 4]		\n"
+			"	sub     %0,%0,16		\n"
+			"3:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   3b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   1b, 4b			\n"
+			"	.word   11b,4b			\n"
+			"	.word   12b,4b			\n"
+			"	.word   13b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from),
+			  "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4)
+			: "ir"(n)
+			: "lp_count", "memory");
+		}
+		if (orig_n / 8) {
+			orig_n = orig_n % 8;
+
+			__asm__ __volatile__(
+			"14:	ld.ab   %3, [%2,4]		\n"
+			"15:	ld.ab   %4, [%2,4]		\n"
+			"	st.ab   %3, [%1,4]		\n"
+			"	st.ab   %4, [%1,4]		\n"
+			"	sub     %0,%0,8			\n"
+			"31:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   31b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   14b,4b			\n"
+			"	.word   15b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from),
+			  "=r"(tmp1), "=r"(tmp2)
+			:
+			: "memory");
+		}
+		if (orig_n / 4) {
+			orig_n = orig_n % 4;
+
+			__asm__ __volatile__(
+			"16:	ld.ab   %3, [%2,4]		\n"
+			"	st.ab   %3, [%1,4]		\n"
+			"	sub     %0,%0,4			\n"
+			"32:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   32b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   16b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+		if (orig_n / 2) {
+			orig_n = orig_n % 2;
+
+			__asm__ __volatile__(
+			"17:	ldw.ab   %3, [%2,2]		\n"
+			"	stw.ab   %3, [%1,2]		\n"
+			"	sub      %0,%0,2		\n"
+			"33:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   33b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   17b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+		if (orig_n & 1) {
+			__asm__ __volatile__(
+			"18:	ldb.ab   %3, [%2,2]		\n"
+			"	stb.ab   %3, [%1,2]		\n"
+			"	sub      %0,%0,1		\n"
+			"34:	; nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   34b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   18b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+	} else {  /* n is NOT constant, so laddered copy of 16x,8,4,2,1  */
+
+		__asm__ __volatile__(
+		"	mov %0,%3			\n"
+		"	lsr.f   lp_count, %3,4		\n"  /* 16x bytes */
+		"	lpnz    3f			\n"
+		"1:	ld.ab   %5, [%2, 4]		\n"
+		"11:	ld.ab   %6, [%2, 4]		\n"
+		"12:	ld.ab   %7, [%2, 4]		\n"
+		"13:	ld.ab   %8, [%2, 4]		\n"
+		"	st.ab   %5, [%1, 4]		\n"
+		"	st.ab   %6, [%1, 4]		\n"
+		"	st.ab   %7, [%1, 4]		\n"
+		"	st.ab   %8, [%1, 4]		\n"
+		"	sub     %0,%0,16		\n"
+		"3:	and.f   %3,%3,0xf		\n"  /* stragglers */
+		"	bz      34f			\n"
+		"	bbit0   %3,3,31f		\n"  /* 8 bytes left */
+		"14:	ld.ab   %5, [%2,4]		\n"
+		"15:	ld.ab   %6, [%2,4]		\n"
+		"	st.ab   %5, [%1,4]		\n"
+		"	st.ab   %6, [%1,4]		\n"
+		"	sub.f   %0,%0,8			\n"
+		"31:	bbit0   %3,2,32f		\n"  /* 4 bytes left */
+		"16:	ld.ab   %5, [%2,4]		\n"
+		"	st.ab   %5, [%1,4]		\n"
+		"	sub.f   %0,%0,4			\n"
+		"32:	bbit0   %3,1,33f		\n"  /* 2 bytes left */
+		"17:	ldw.ab  %5, [%2,2]		\n"
+		"	stw.ab  %5, [%1,2]		\n"
+		"	sub.f   %0,%0,2			\n"
+		"33:	bbit0   %3,0,34f		\n"
+		"18:	ldb.ab  %5, [%2,1]		\n"  /* 1 byte left */
+		"	stb.ab  %5, [%1,1]		\n"
+		"	sub.f   %0,%0,1			\n"
+		"34:	;nop				\n"
+		"	.section .fixup, \"ax\"		\n"
+		"	.align 4			\n"
+		"4:	j   34b				\n"
+		"	.previous			\n"
+		"	.section __ex_table, \"a\"	\n"
+		"	.align 4			\n"
+		"	.word   1b, 4b			\n"
+		"	.word   11b,4b			\n"
+		"	.word   12b,4b			\n"
+		"	.word   13b,4b			\n"
+		"	.word   14b,4b			\n"
+		"	.word   15b,4b			\n"
+		"	.word   16b,4b			\n"
+		"	.word   17b,4b			\n"
+		"	.word   18b,4b			\n"
+		"	.previous			\n"
+		: "=r" (res), "+r"(to), "+r"(from), "+r"(n), "=r"(val),
+		  "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4)
+		:
+		: "lp_count", "memory");
+	}
+
+	return res;
+}
+
+static inline unsigned long
+raw_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	long res = 0;
+	char val;
+	unsigned long tmp1, tmp2, tmp3, tmp4;
+	unsigned long orig_n = n;
+
+	if (n == 0)
+		return 0;
+
+	/* unaligned */
+	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+
+		unsigned char tmp;
+
+		__asm__ __volatile__(
+		"	mov.f   lp_count, %0		\n"
+		"	lpnz 3f				\n"
+		"	ldb.ab  %1, [%3, 1]		\n"
+		"1:	stb.ab  %1, [%2, 1]		\n"
+		"	sub     %0, %0, 1		\n"
+		"3:	;nop				\n"
+		"	.section .fixup, \"ax\"		\n"
+		"	.align 4			\n"
+		"4:	j   3b				\n"
+		"	.previous			\n"
+		"	.section __ex_table, \"a\"	\n"
+		"	.align 4			\n"
+		"	.word   1b, 4b			\n"
+		"	.previous			\n"
+
+		: "+r" (n),
+		/* Note as an '&' earlyclobber operand to make sure the
+		 * temporary register inside the loop is not the same as
+		 * FROM or TO.
+		 */
+		  "=&r" (tmp), "+r" (to), "+r" (from)
+		:
+		: "lp_count", "memory");
+
+		return n;
+	}
+
+	if (__builtin_constant_p(orig_n)) {
+		res = orig_n;
+
+		if (orig_n / 16) {
+			orig_n = orig_n % 16;
+
+			__asm__ __volatile__(
+			"	lsr lp_count, %7,4		\n"
+			"	lp  3f				\n"
+			"	ld.ab %3, [%2, 4]		\n"
+			"	ld.ab %4, [%2, 4]		\n"
+			"	ld.ab %5, [%2, 4]		\n"
+			"	ld.ab %6, [%2, 4]		\n"
+			"1:	st.ab %3, [%1, 4]		\n"
+			"11:	st.ab %4, [%1, 4]		\n"
+			"12:	st.ab %5, [%1, 4]		\n"
+			"13:	st.ab %6, [%1, 4]		\n"
+			"	sub   %0, %0, 16		\n"
+			"3:;nop					\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   3b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   1b, 4b			\n"
+			"	.word   11b,4b			\n"
+			"	.word   12b,4b			\n"
+			"	.word   13b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from),
+			  "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4)
+			: "ir"(n)
+			: "lp_count", "memory");
+		}
+		if (orig_n / 8) {
+			orig_n = orig_n % 8;
+
+			__asm__ __volatile__(
+			"	ld.ab   %3, [%2,4]		\n"
+			"	ld.ab   %4, [%2,4]		\n"
+			"14:	st.ab   %3, [%1,4]		\n"
+			"15:	st.ab   %4, [%1,4]		\n"
+			"	sub     %0, %0, 8		\n"
+			"31:;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   31b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   14b,4b			\n"
+			"	.word   15b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from),
+			  "=r"(tmp1), "=r"(tmp2)
+			:
+			: "memory");
+		}
+		if (orig_n / 4) {
+			orig_n = orig_n % 4;
+
+			__asm__ __volatile__(
+			"	ld.ab   %3, [%2,4]		\n"
+			"16:	st.ab   %3, [%1,4]		\n"
+			"	sub     %0, %0, 4		\n"
+			"32:;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   32b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   16b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+		if (orig_n / 2) {
+			orig_n = orig_n % 2;
+
+			__asm__ __volatile__(
+			"	ldw.ab    %3, [%2,2]		\n"
+			"17:	stw.ab    %3, [%1,2]		\n"
+			"	sub       %0, %0, 2		\n"
+			"33:;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   33b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   17b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+		if (orig_n & 1) {
+			__asm__ __volatile__(
+			"	ldb.ab  %3, [%2,1]		\n"
+			"18:	stb.ab  %3, [%1,1]		\n"
+			"	sub     %0, %0, 1		\n"
+			"34:	;nop				\n"
+			"	.section .fixup, \"ax\"		\n"
+			"	.align 4			\n"
+			"4:	j   34b				\n"
+			"	.previous			\n"
+			"	.section __ex_table, \"a\"	\n"
+			"	.align 4			\n"
+			"	.word   18b,4b			\n"
+			"	.previous			\n"
+			: "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1)
+			:
+			: "memory");
+		}
+	} else {  /* n is NOT constant, so laddered copy of 16x,8,4,2,1  */
+
+		__asm__ __volatile__(
+		"	mov   %0,%3			\n"
+		"	lsr.f lp_count, %3,4		\n"  /* 16x bytes */
+		"	lpnz  3f			\n"
+		"	ld.ab %5, [%2, 4]		\n"
+		"	ld.ab %6, [%2, 4]		\n"
+		"	ld.ab %7, [%2, 4]		\n"
+		"	ld.ab %8, [%2, 4]		\n"
+		"1:	st.ab %5, [%1, 4]		\n"
+		"11:	st.ab %6, [%1, 4]		\n"
+		"12:	st.ab %7, [%1, 4]		\n"
+		"13:	st.ab %8, [%1, 4]		\n"
+		"	sub   %0, %0, 16		\n"
+		"3:	and.f %3,%3,0xf			\n" /* stragglers */
+		"	bz 34f				\n"
+		"	bbit0   %3,3,31f		\n" /* 8 bytes left */
+		"	ld.ab   %5, [%2,4]		\n"
+		"	ld.ab   %6, [%2,4]		\n"
+		"14:	st.ab   %5, [%1,4]		\n"
+		"15:	st.ab   %6, [%1,4]		\n"
+		"	sub.f   %0, %0, 8		\n"
+		"31:	bbit0   %3,2,32f		\n"  /* 4 bytes left */
+		"	ld.ab   %5, [%2,4]		\n"
+		"16:	st.ab   %5, [%1,4]		\n"
+		"	sub.f   %0, %0, 4		\n"
+		"32:	bbit0 %3,1,33f			\n"  /* 2 bytes left */
+		"	ldw.ab    %5, [%2,2]		\n"
+		"17:	stw.ab    %5, [%1,2]		\n"
+		"	sub.f %0, %0, 2			\n"
+		"33:	bbit0 %3,0,34f			\n"
+		"	ldb.ab    %5, [%2,1]		\n"  /* 1 byte left */
+		"18:	stb.ab  %5, [%1,1]		\n"
+		"	sub.f %0, %0, 1			\n"
+		"34:	;nop				\n"
+		"	.section .fixup, \"ax\"		\n"
+		"	.align 4			\n"
+		"4:	j   34b				\n"
+		"	.previous			\n"
+		"	.section __ex_table, \"a\"	\n"
+		"	.align 4			\n"
+		"	.word   1b, 4b			\n"
+		"	.word   11b,4b			\n"
+		"	.word   12b,4b			\n"
+		"	.word   13b,4b			\n"
+		"	.word   14b,4b			\n"
+		"	.word   15b,4b			\n"
+		"	.word   16b,4b			\n"
+		"	.word   17b,4b			\n"
+		"	.word   18b,4b			\n"
+		"	.previous			\n"
+		: "=r" (res), "+r"(to), "+r"(from), "+r"(n), "=r"(val),
+		  "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4)
+		:
+		: "lp_count", "memory");
+	}
+
+	return res;
+}
+
+static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
+{
+	long res = n;
+	unsigned char *d_char = to;
+
+	__asm__ __volatile__(
+	"	bbit0   %0, 0, 1f		\n"
+	"75:	stb.ab  %2, [%0,1]		\n"
+	"	sub %1, %1, 1			\n"
+	"1:	bbit0   %0, 1, 2f		\n"
+	"76:	stw.ab  %2, [%0,2]		\n"
+	"	sub %1, %1, 2			\n"
+	"2:	asr.f   lp_count, %1, 2		\n"
+	"	lpnz    3f			\n"
+	"77:	st.ab   %2, [%0,4]		\n"
+	"	sub %1, %1, 4			\n"
+	"3:	bbit0   %1, 1, 4f		\n"
+	"78:	stw.ab  %2, [%0,2]		\n"
+	"	sub %1, %1, 2			\n"
+	"4:	bbit0   %1, 0, 5f		\n"
+	"79:	stb.ab  %2, [%0,1]		\n"
+	"	sub %1, %1, 1			\n"
+	"5:					\n"
+	"	.section .fixup, \"ax\"		\n"
+	"	.align 4			\n"
+	"3:	j   5b				\n"
+	"	.previous			\n"
+	"	.section __ex_table, \"a\"	\n"
+	"	.align 4			\n"
+	"	.word   75b, 3b			\n"
+	"	.word   76b, 3b			\n"
+	"	.word   77b, 3b			\n"
+	"	.word   78b, 3b			\n"
+	"	.word   79b, 3b			\n"
+	"	.previous			\n"
+	: "+r"(d_char), "+r"(res)
+	: "i"(0)
+	: "lp_count", "memory");
+
+	return res;
+}
+
+#ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
+
+#define INLINE_COPY_TO_USER
+#define INLINE_COPY_FROM_USER
+
+#define __clear_user(d, n)		__arc_clear_user(d, n)
+#else
+extern unsigned long arc_clear_user_noinline(void __user *to,
+		unsigned long n);
+#define __clear_user(d, n)		arc_clear_user_noinline(d, n)
+#endif
+
+#include <asm-generic/uaccess.h>
+
+#endif
diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h
new file mode 100644
index 000000000..cf5a02382
--- /dev/null
+++ b/arch/arc/include/asm/unaligned.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_UNALIGNED_H
+#define _ASM_ARC_UNALIGNED_H
+
+/* ARC700 can't handle unaligned Data accesses. */
+
+#include <asm-generic/unaligned.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_ARC_EMUL_UNALIGNED
+int misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		     struct callee_regs *cregs);
+#else
+static inline int
+misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		 struct callee_regs *cregs)
+{
+	/* Not fixed */
+	return 1;
+}
+#endif
+
+#endif /* _ASM_ARC_UNALIGNED_H */
diff --git a/arch/arc/include/asm/unwind.h b/arch/arc/include/asm/unwind.h
new file mode 100644
index 000000000..e95a20453
--- /dev/null
+++ b/arch/arc/include/asm/unwind.h
@@ -0,0 +1,156 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef _ASM_ARC_UNWIND_H
+#define _ASM_ARC_UNWIND_H
+
+#ifdef CONFIG_ARC_DW2_UNWIND
+
+#include <linux/sched.h>
+
+struct arc700_regs {
+	unsigned long r0;
+	unsigned long r1;
+	unsigned long r2;
+	unsigned long r3;
+	unsigned long r4;
+	unsigned long r5;
+	unsigned long r6;
+	unsigned long r7;
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long r14;
+	unsigned long r15;
+	unsigned long r16;
+	unsigned long r17;
+	unsigned long r18;
+	unsigned long r19;
+	unsigned long r20;
+	unsigned long r21;
+	unsigned long r22;
+	unsigned long r23;
+	unsigned long r24;
+	unsigned long r25;
+	unsigned long r26;
+	unsigned long r27;	/* fp */
+	unsigned long r28;	/* sp */
+	unsigned long r29;
+	unsigned long r30;
+	unsigned long r31;	/* blink */
+	unsigned long r63;	/* pc */
+};
+
+struct unwind_frame_info {
+	struct arc700_regs regs;
+	struct task_struct *task;
+	unsigned call_frame:1;
+};
+
+#define UNW_PC(frame)		((frame)->regs.r63)
+#define UNW_SP(frame)		((frame)->regs.r28)
+#define UNW_BLINK(frame)	((frame)->regs.r31)
+
+/* Rajesh FIXME */
+#ifdef CONFIG_FRAME_POINTER
+#define UNW_FP(frame)		((frame)->regs.r27)
+#define FRAME_RETADDR_OFFSET	4
+#define FRAME_LINK_OFFSET	0
+#define STACK_BOTTOM_UNW(tsk)	STACK_LIMIT((tsk)->thread.ksp)
+#define STACK_TOP_UNW(tsk)	((tsk)->thread.ksp)
+#else
+#define UNW_FP(frame)		((void)(frame), 0)
+#endif
+
+#define STACK_LIMIT(ptr)	(((ptr) - 1) & ~(THREAD_SIZE - 1))
+
+#define UNW_REGISTER_INFO \
+	PTREGS_INFO(r0), \
+	PTREGS_INFO(r1), \
+	PTREGS_INFO(r2), \
+	PTREGS_INFO(r3), \
+	PTREGS_INFO(r4), \
+	PTREGS_INFO(r5), \
+	PTREGS_INFO(r6), \
+	PTREGS_INFO(r7), \
+	PTREGS_INFO(r8), \
+	PTREGS_INFO(r9), \
+	PTREGS_INFO(r10), \
+	PTREGS_INFO(r11), \
+	PTREGS_INFO(r12), \
+	PTREGS_INFO(r13), \
+	PTREGS_INFO(r14), \
+	PTREGS_INFO(r15), \
+	PTREGS_INFO(r16), \
+	PTREGS_INFO(r17), \
+	PTREGS_INFO(r18), \
+	PTREGS_INFO(r19), \
+	PTREGS_INFO(r20), \
+	PTREGS_INFO(r21), \
+	PTREGS_INFO(r22), \
+	PTREGS_INFO(r23), \
+	PTREGS_INFO(r24), \
+	PTREGS_INFO(r25), \
+	PTREGS_INFO(r26), \
+	PTREGS_INFO(r27), \
+	PTREGS_INFO(r28), \
+	PTREGS_INFO(r29), \
+	PTREGS_INFO(r30), \
+	PTREGS_INFO(r31), \
+	PTREGS_INFO(r63)
+
+#define UNW_DEFAULT_RA(raItem, dataAlign) \
+	((raItem).where == Memory && !((raItem).value * (dataAlign) + 4))
+
+extern int arc_unwind(struct unwind_frame_info *frame);
+extern void arc_unwind_init(void);
+extern void *unwind_add_table(struct module *module, const void *table_start,
+			      unsigned long table_size);
+extern void unwind_remove_table(void *handle, int init_only);
+
+static inline int
+arch_unwind_init_running(struct unwind_frame_info *info,
+			 int (*callback) (struct unwind_frame_info *info,
+					  void *arg),
+			 void *arg)
+{
+	return 0;
+}
+
+static inline int arch_unw_user_mode(const struct unwind_frame_info *info)
+{
+	return 0;
+}
+
+static inline void arch_unw_init_blocked(struct unwind_frame_info *info)
+{
+	return;
+}
+
+static inline void arch_unw_init_frame_info(struct unwind_frame_info *info,
+					    struct pt_regs *regs)
+{
+	return;
+}
+
+#else
+
+#define UNW_PC(frame) ((void)(frame), 0)
+#define UNW_SP(frame) ((void)(frame), 0)
+#define UNW_FP(frame) ((void)(frame), 0)
+
+static inline void arc_unwind_init(void)
+{
+}
+
+#define unwind_add_table(a, b, c)
+#define unwind_remove_table(a, b)
+
+#endif /* CONFIG_ARC_DW2_UNWIND */
+
+#endif /* _ASM_ARC_UNWIND_H */
diff --git a/arch/arc/include/asm/vermagic.h b/arch/arc/include/asm/vermagic.h
new file mode 100644
index 000000000..a10257d2c
--- /dev/null
+++ b/arch/arc/include/asm/vermagic.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "ARC700"
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/arc/include/asm/vmalloc.h b/arch/arc/include/asm/vmalloc.h
new file mode 100644
index 000000000..973095aad
--- /dev/null
+++ b/arch/arc/include/asm/vmalloc.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_ARC_VMALLOC_H
+#define _ASM_ARC_VMALLOC_H
+
+#endif /* _ASM_ARC_VMALLOC_H */
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
new file mode 100644
index 000000000..e78470141
--- /dev/null
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+generic-y += ucontext.h
diff --git a/arch/arc/include/uapi/asm/bpf_perf_event.h b/arch/arc/include/uapi/asm/bpf_perf_event.h
new file mode 100644
index 000000000..6cb1c2823
--- /dev/null
+++ b/arch/arc/include/uapi/asm/bpf_perf_event.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
+#define _UAPI__ASM_BPF_PERF_EVENT_H__
+
+#include <asm/ptrace.h>
+
+typedef struct user_regs_struct bpf_user_pt_regs_t;
+
+#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */
diff --git a/arch/arc/include/uapi/asm/byteorder.h b/arch/arc/include/uapi/asm/byteorder.h
new file mode 100644
index 000000000..554011153
--- /dev/null
+++ b/arch/arc/include/uapi/asm/byteorder.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARC_BYTEORDER_H
+#define __ASM_ARC_BYTEORDER_H
+
+#ifdef __BIG_ENDIAN__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif /* ASM_ARC_BYTEORDER_H */
diff --git a/arch/arc/include/uapi/asm/cachectl.h b/arch/arc/include/uapi/asm/cachectl.h
new file mode 100644
index 000000000..0e4f2affc
--- /dev/null
+++ b/arch/arc/include/uapi/asm/cachectl.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARC_ASM_CACHECTL_H
+#define __ARC_ASM_CACHECTL_H
+
+/*
+ * ARC ABI flags defined for Android's finegrained cacheflush requirements
+ */
+#define CF_I_INV	0x0002
+#define CF_D_FLUSH	0x0010
+#define CF_D_FLUSH_INV	0x0020
+
+#define CF_DEFAULT	(CF_I_INV | CF_D_FLUSH)
+
+/*
+ * Standard flags expected by cacheflush system call users
+ */
+#define ICACHE	CF_I_INV
+#define DCACHE	CF_D_FLUSH
+#define BCACHE	(CF_I_INV | CF_D_FLUSH)
+
+#endif
diff --git a/arch/arc/include/uapi/asm/elf.h b/arch/arc/include/uapi/asm/elf.h
new file mode 100644
index 000000000..3c1dae4e5
--- /dev/null
+++ b/arch/arc/include/uapi/asm/elf.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI__ASM_ARC_ELF_H
+#define _UAPI__ASM_ARC_ELF_H
+
+#include <asm/ptrace.h>		/* for user_regs_struct */
+
+/* Machine specific ELF Hdr flags */
+#define EF_ARC_OSABI_MSK	0x00000f00
+
+#define EF_ARC_OSABI_V3		0x00000300   /* v3 (no legacy syscalls) */
+#define EF_ARC_OSABI_V4		0x00000400   /* v4 (64bit data any reg align) */
+
+#if __GNUC__ < 6
+#define EF_ARC_OSABI_CURRENT	EF_ARC_OSABI_V3
+#else
+#define EF_ARC_OSABI_CURRENT	EF_ARC_OSABI_V4
+#endif
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_fpregset_t;
+
+#define ELF_NGREG	(sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+#define ELF_ARCV2REG	(sizeof(struct user_regs_arcv2) / sizeof(elf_greg_t))
+
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#endif
diff --git a/arch/arc/include/uapi/asm/page.h b/arch/arc/include/uapi/asm/page.h
new file mode 100644
index 000000000..2a4ad619a
--- /dev/null
+++ b/arch/arc/include/uapi/asm/page.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI__ASM_ARC_PAGE_H
+#define _UAPI__ASM_ARC_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#if defined(CONFIG_ARC_PAGE_SIZE_16K)
+#define PAGE_SHIFT 14
+#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
+#define PAGE_SHIFT 12
+#else
+/*
+ * Default 8k
+ * done this way (instead of under CONFIG_ARC_PAGE_SIZE_8K) because adhoc
+ * user code (busybox appletlib.h) expects PAGE_SHIFT to be defined w/o
+ * using the correct uClibc header and in their build our autoconf.h is
+ * not available
+ */
+#define PAGE_SHIFT 13
+#endif
+
+#define PAGE_SIZE	_BITUL(PAGE_SHIFT)	/* Default 8K */
+#define PAGE_OFFSET	_AC(0x80000000, UL)	/* Kernel starts at 2G onwrds */
+
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h
new file mode 100644
index 000000000..2a6eff57f
--- /dev/null
+++ b/arch/arc/include/uapi/asm/ptrace.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _UAPI__ASM_ARC_PTRACE_H
+#define _UAPI__ASM_ARC_PTRACE_H
+
+#define PTRACE_GET_THREAD_AREA	25
+
+#ifndef __ASSEMBLY__
+/*
+ * Userspace ABI: Register state needed by
+ *  -ptrace (gdbserver)
+ *  -sigcontext (SA_SIGNINFO signal frame)
+ *
+ * This is to decouple pt_regs from user-space ABI, to be able to change it
+ * w/o affecting the ABI.
+ *
+ * The intermediate pad,pad2 are relics of initial layout based on pt_regs
+ * for optimizations when copying pt_regs to/from user_regs_struct.
+ * We no longer need them, but can't be changed as they are part of ABI now.
+ *
+ * Also, sigcontext only care about the scratch regs as that is what we really
+ * save/restore for signal handling. However gdb also uses the same struct
+ * hence callee regs need to be in there too.
+*/
+struct user_regs_struct {
+
+	unsigned long pad;
+	struct {
+		unsigned long bta, lp_start, lp_end, lp_count;
+		unsigned long status32, ret, blink, fp, gp;
+		unsigned long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0;
+		unsigned long sp;
+	} scratch;
+	unsigned long pad2;
+	struct {
+		unsigned long r25, r24, r23, r22, r21, r20;
+		unsigned long r19, r18, r17, r16, r15, r14, r13;
+	} callee;
+	unsigned long efa;	/* break pt addr, for break points in delay slots */
+	unsigned long stop_pc;	/* give dbg stop_pc after ensuring brkpt trap */
+};
+
+struct user_regs_arcv2 {
+	unsigned long r30, r58, r59;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _UAPI__ASM_ARC_PTRACE_H */
diff --git a/arch/arc/include/uapi/asm/setup.h b/arch/arc/include/uapi/asm/setup.h
new file mode 100644
index 000000000..a6d4e4493
--- /dev/null
+++ b/arch/arc/include/uapi/asm/setup.h
@@ -0,0 +1,6 @@
+/*
+ * setup.h is part of userspace header ABI so UAPI scripts have to generate it
+ * even if there's nothing to export - causing empty <uapi/asm/setup.h>
+ * However to prevent "patch" from discarding it we add this placeholder
+ * comment
+ */
diff --git a/arch/arc/include/uapi/asm/sigcontext.h b/arch/arc/include/uapi/asm/sigcontext.h
new file mode 100644
index 000000000..7a5449dfc
--- /dev/null
+++ b/arch/arc/include/uapi/asm/sigcontext.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_SIGCONTEXT_H
+#define _ASM_ARC_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.
+ */
+struct sigcontext {
+	struct user_regs_struct regs;
+	struct user_regs_arcv2 v2abi;
+};
+
+#endif /* _ASM_ARC_SIGCONTEXT_H */
diff --git a/arch/arc/include/uapi/asm/signal.h b/arch/arc/include/uapi/asm/signal.h
new file mode 100644
index 000000000..ba3143a1b
--- /dev/null
+++ b/arch/arc/include/uapi/asm/signal.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
+ */
+
+#ifndef _ASM_ARC_SIGNAL_H
+#define _ASM_ARC_SIGNAL_H
+
+/*
+ * This is much needed for ARC sigreturn optimization.
+ * This allows uClibc to piggback the addr of a sigreturn stub in sigaction,
+ * which allows sigreturn based re-entry into kernel after handling signal.
+ * W/o this kernel needs to "synthesize" the sigreturn trampoline on user
+ * mode stack which in turn forces the following:
+ * -TLB Flush (after making the stack page executable)
+ * -Cache line Flush (to make I/D Cache lines coherent)
+ */
+#define SA_RESTORER	0x04000000
+
+#include <asm-generic/signal.h>
+
+#endif /* _ASM_ARC_SIGNAL_H */
diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h
new file mode 100644
index 000000000..02109cd48
--- /dev/null
+++ b/arch/arc/include/uapi/asm/swab.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: May 2011
+ *  -Support single cycle endian-swap insn in ARC700 4.10
+ *
+ * vineetg: June 2009
+ *  -Better htonl implementation (5 instead of 9 ALU instructions)
+ *  -Hardware assisted single cycle bswap (Use Case of ARC custom instrn)
+ */
+
+#ifndef __ASM_ARC_SWAB_H
+#define __ASM_ARC_SWAB_H
+
+#include <linux/types.h>
+
+/* Native single cycle endian swap insn */
+#ifdef CONFIG_ARC_HAS_SWAPE
+
+#define __arch_swab32(x)		\
+({					\
+	unsigned int tmp = x;		\
+	__asm__(			\
+	"	swape	%0, %1	\n"	\
+	: "=r" (tmp)			\
+	: "r" (tmp));			\
+	tmp;				\
+})
+
+#else
+
+/* Several ways of Endian-Swap Emulation for ARC
+ * 0: kernel generic
+ * 1: ARC optimised "C"
+ * 2: ARC Custom instruction
+ */
+#define ARC_BSWAP_TYPE	1
+
+#if (ARC_BSWAP_TYPE == 1)		/******* Software only ********/
+
+/* The kernel default implementation of htonl is
+ *		return  x<<24 | x>>24 |
+ *		 (x & (__u32)0x0000ff00UL)<<8 | (x & (__u32)0x00ff0000UL)>>8;
+ *
+ * This generates 9 instructions on ARC (excluding the ld/st)
+ *
+ * 8051fd8c:	ld     r3,[r7,20]	; Mem op : Get the value to be swapped
+ * 8051fd98:	asl    r5,r3,24		; get  3rd Byte
+ * 8051fd9c:	lsr    r2,r3,24		; get  0th Byte
+ * 8051fda0:	and    r4,r3,0xff00
+ * 8051fda8:	asl    r4,r4,8		; get 1st Byte
+ * 8051fdac:	and    r3,r3,0x00ff0000
+ * 8051fdb4:	or     r2,r2,r5		; combine 0th and 3rd Bytes
+ * 8051fdb8:	lsr    r3,r3,8		; 2nd Byte at correct place in Dst Reg
+ * 8051fdbc:	or     r2,r2,r4		; combine 0,3 Bytes with 1st Byte
+ * 8051fdc0:	or     r2,r2,r3		; combine 0,3,1 Bytes with 2nd Byte
+ * 8051fdc4:	st     r2,[r1,20]	; Mem op : save result back to mem
+ *
+ * Joern suggested a better "C" algorithm which is great since
+ * (1) It is portable to any architecure
+ * (2) At the same time it takes advantage of ARC ISA (rotate intrns)
+ */
+
+#define __arch_swab32(x)					\
+({	unsigned long __in = (x), __tmp;			\
+	__tmp = __in << 8 | __in >> 24; /* ror tmp,in,24 */	\
+	__in = __in << 24 | __in >> 8; /* ror in,in,8 */	\
+	__tmp ^= __in;						\
+	__tmp &= 0xff00ff;					\
+	__tmp ^ __in;						\
+})
+
+#elif (ARC_BSWAP_TYPE == 2)	/* Custom single cycle bswap instruction */
+
+#define __arch_swab32(x)						\
+({									\
+	unsigned int tmp = x;						\
+	__asm__(							\
+	"	.extInstruction	bswap, 7, 0x00, SUFFIX_NONE, SYNTAX_2OP	\n"\
+	"	bswap  %0, %1						\n"\
+	: "=r" (tmp)							\
+	: "r" (tmp));							\
+	tmp;								\
+})
+
+#endif /* ARC_BSWAP_TYPE=zzz */
+
+#endif /* CONFIG_ARC_HAS_SWAPE */
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#define __SWAB_64_THRU_32__
+#endif
+
+#endif
diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h
new file mode 100644
index 000000000..fa2713ae6
--- /dev/null
+++ b/arch/arc/include/uapi/asm/unistd.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/******** no-legacy-syscalls-ABI *******/
+
+/*
+ * Non-typical guard macro to enable inclusion twice in ARCH sys.c
+ * That is how the Generic syscall wrapper generator works
+ */
+#if !defined(_UAPI_ASM_ARC_UNISTD_H) || defined(__SYSCALL)
+#define _UAPI_ASM_ARC_UNISTD_H
+
+#define __ARCH_WANT_RENAMEAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SET_GET_RLIMIT
+#define __ARCH_WANT_SYS_EXECVE
+#define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_CLONE3
+#define __ARCH_WANT_SYS_VFORK
+#define __ARCH_WANT_SYS_FORK
+#define __ARCH_WANT_TIME32_SYSCALLS
+
+#define sys_mmap2 sys_mmap_pgoff
+
+#include <asm-generic/unistd.h>
+
+#define NR_syscalls	__NR_syscalls
+
+/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
+#define __NR_sysfs		(__NR_arch_specific_syscall + 3)
+
+/* ARC specific syscall */
+#define __NR_cacheflush		(__NR_arch_specific_syscall + 0)
+#define __NR_arc_settls		(__NR_arch_specific_syscall + 1)
+#define __NR_arc_gettls		(__NR_arch_specific_syscall + 2)
+#define __NR_arc_usr_cmpxchg	(__NR_arch_specific_syscall + 4)
+
+__SYSCALL(__NR_cacheflush, sys_cacheflush)
+__SYSCALL(__NR_arc_settls, sys_arc_settls)
+__SYSCALL(__NR_arc_gettls, sys_arc_gettls)
+__SYSCALL(__NR_arc_usr_cmpxchg, sys_arc_usr_cmpxchg)
+__SYSCALL(__NR_sysfs, sys_sysfs)
+
+#undef __SYSCALL
+
+#endif
diff --git a/arch/arc/kernel/.gitignore b/arch/arc/kernel/.gitignore
new file mode 100644
index 000000000..bbb90f92d
--- /dev/null
+++ b/arch/arc/kernel/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
new file mode 100644
index 000000000..0723d888a
--- /dev/null
+++ b/arch/arc/kernel/Makefile
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+
+obj-y	:= head.o arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
+obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
+obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
+obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
+
+obj-$(CONFIG_MODULES)			+= arcksyms.o module.o
+obj-$(CONFIG_SMP) 			+= smp.o
+obj-$(CONFIG_ARC_MCIP)			+= mcip.o
+obj-$(CONFIG_ARC_DW2_UNWIND)		+= unwind.o
+obj-$(CONFIG_KPROBES)      		+= kprobes.o
+obj-$(CONFIG_ARC_EMUL_UNALIGNED) 	+= unaligned.o
+obj-$(CONFIG_KGDB)			+= kgdb.o
+obj-$(CONFIG_ARC_METAWARE_HLINK)	+= arc_hostlink.o
+obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
+obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
+
+obj-$(CONFIG_ARC_FPU_SAVE_RESTORE)	+= fpu.o
+ifdef CONFIG_ISA_ARCOMPACT
+CFLAGS_fpu.o   += -mdpfp
+endif
+
+ifdef CONFIG_ARC_DW2_UNWIND
+CFLAGS_ctx_sw.o += -fno-omit-frame-pointer
+obj-y += ctx_sw.o
+else
+obj-y += ctx_sw_asm.o
+endif
+
+extra-y := vmlinux.lds
diff --git a/arch/arc/kernel/arc_hostlink.c b/arch/arc/kernel/arc_hostlink.c
new file mode 100644
index 000000000..08c5196ef
--- /dev/null
+++ b/arch/arc/kernel/arc_hostlink.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arc_hostlink.c: Pseudo-driver for Metaware provided "hostlink" facility
+ *
+ * Allows Linux userland access to host in absence of any peripherals.
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/fs.h>		/* file_operations */
+#include <linux/miscdevice.h>
+#include <linux/mm.h>		/* VM_IO */
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+static unsigned char __HOSTLINK__[4 * PAGE_SIZE] __aligned(PAGE_SIZE);
+
+static int arc_hl_mmap(struct file *fp, struct vm_area_struct *vma)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot)) {
+		pr_warn("Hostlink buffer mmap ERROR\n");
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static long arc_hl_ioctl(struct file *file, unsigned int cmd,
+			unsigned long arg)
+{
+	/* we only support, returning the physical addr to mmap in user space */
+	put_user((unsigned int)__HOSTLINK__, (int __user *)arg);
+	return 0;
+}
+
+static const struct file_operations arc_hl_fops = {
+	.unlocked_ioctl	= arc_hl_ioctl,
+	.mmap		= arc_hl_mmap,
+};
+
+static struct miscdevice arc_hl_dev = {
+	.minor	= MISC_DYNAMIC_MINOR,
+	.name	= "hostlink",
+	.fops	= &arc_hl_fops
+};
+
+static int __init arc_hl_init(void)
+{
+	pr_info("ARC Hostlink driver mmap at 0x%p\n", __HOSTLINK__);
+	return misc_register(&arc_hl_dev);
+}
+module_init(arc_hl_init);
diff --git a/arch/arc/kernel/arcksyms.c b/arch/arc/kernel/arcksyms.c
new file mode 100644
index 000000000..8851c0a19
--- /dev/null
+++ b/arch/arc/kernel/arcksyms.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arcksyms.c - Exporting symbols not exportable from their own sources
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/module.h>
+
+/* libgcc functions, not part of kernel sources */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __divsi3(void);
+extern void __divsf3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __ucmpdi2(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+extern void __cmpdi2(void);
+extern void __fixunsdfsi(void);
+extern void __muldf3(void);
+extern void __divdf3(void);
+extern void __floatunsidf(void);
+extern void __floatunsisf(void);
+extern void __udivdi3(void);
+
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__divsf3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__ucmpdi2);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__cmpdi2);
+EXPORT_SYMBOL(__fixunsdfsi);
+EXPORT_SYMBOL(__muldf3);
+EXPORT_SYMBOL(__divdf3);
+EXPORT_SYMBOL(__floatunsidf);
+EXPORT_SYMBOL(__floatunsisf);
+EXPORT_SYMBOL(__udivdi3);
+
+/* ARC optimised assembler routines */
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strlen);
diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c
new file mode 100644
index 000000000..0e884036a
--- /dev/null
+++ b/arch/arc/kernel/asm-offsets.c
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+#include <linux/ptrace.h>
+#include <asm/hardirq.h>
+#include <asm/page.h>
+
+
+int main(void)
+{
+	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
+	DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
+
+	BLANK();
+
+	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
+	DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg));
+	DEFINE(THREAD_FAULT_ADDR,
+	       offsetof(struct thread_struct, fault_address));
+
+	BLANK();
+
+	DEFINE(THREAD_INFO_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(THREAD_INFO_PREEMPT_COUNT,
+	       offsetof(struct thread_info, preempt_count));
+
+	BLANK();
+
+	DEFINE(TASK_ACT_MM, offsetof(struct task_struct, active_mm));
+	DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
+	DEFINE(TASK_PID, offsetof(struct task_struct, pid));
+	DEFINE(TASK_COMM, offsetof(struct task_struct, comm));
+
+	DEFINE(MM_CTXT, offsetof(struct mm_struct, context));
+	DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
+
+	DEFINE(MM_CTXT_ASID, offsetof(mm_context_t, asid));
+
+	BLANK();
+
+	DEFINE(PT_status32, offsetof(struct pt_regs, status32));
+	DEFINE(PT_event, offsetof(struct pt_regs, event));
+	DEFINE(PT_sp, offsetof(struct pt_regs, sp));
+	DEFINE(PT_r0, offsetof(struct pt_regs, r0));
+	DEFINE(PT_r1, offsetof(struct pt_regs, r1));
+	DEFINE(PT_r2, offsetof(struct pt_regs, r2));
+	DEFINE(PT_r3, offsetof(struct pt_regs, r3));
+	DEFINE(PT_r4, offsetof(struct pt_regs, r4));
+	DEFINE(PT_r5, offsetof(struct pt_regs, r5));
+	DEFINE(PT_r6, offsetof(struct pt_regs, r6));
+	DEFINE(PT_r7, offsetof(struct pt_regs, r7));
+	DEFINE(PT_r8, offsetof(struct pt_regs, r8));
+	DEFINE(PT_r10, offsetof(struct pt_regs, r10));
+	DEFINE(PT_r26, offsetof(struct pt_regs, r26));
+	DEFINE(PT_ret, offsetof(struct pt_regs, ret));
+	DEFINE(PT_blink, offsetof(struct pt_regs, blink));
+	DEFINE(PT_lpe, offsetof(struct pt_regs, lp_end));
+	DEFINE(PT_lpc, offsetof(struct pt_regs, lp_count));
+	DEFINE(PT_user_r25, offsetof(struct pt_regs, user_r25));
+
+	DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
+	DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
+
+#ifdef CONFIG_ISA_ARCV2
+	OFFSET(PT_r12, pt_regs, r12);
+	OFFSET(PT_r30, pt_regs, r30);
+#endif
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	OFFSET(PT_r58, pt_regs, r58);
+	OFFSET(PT_r59, pt_regs, r59);
+#endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	OFFSET(PT_DSP_CTRL, pt_regs, DSP_CTRL);
+#endif
+
+	return 0;
+}
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
new file mode 100644
index 000000000..1a76f2d6f
--- /dev/null
+++ b/arch/arc/kernel/ctx_sw.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Vineetg: Aug 2009
+ *  -"C" version of lowest level context switch asm macro called by schedular
+ *   gcc doesn't generate the dward CFI info for hand written asm, hence can't
+ *   backtrace out of it (e.g. tasks sleeping in kernel).
+ *   So we cheat a bit by writing almost similar code in inline-asm.
+ *  -This is a hacky way of doing things, but there is no other simple way.
+ *   I don't want/intend to extend unwinding code to understand raw asm
+ */
+
+#include <asm/asm-offsets.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+
+#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
+
+struct task_struct *__sched
+__switch_to(struct task_struct *prev_task, struct task_struct *next_task)
+{
+	unsigned int tmp;
+	unsigned int prev = (unsigned int)prev_task;
+	unsigned int next = (unsigned int)next_task;
+
+	__asm__ __volatile__(
+		/* FP/BLINK save generated by gcc (standard function prologue */
+		"st.a    r13, [sp, -4]   \n\t"
+		"st.a    r14, [sp, -4]   \n\t"
+		"st.a    r15, [sp, -4]   \n\t"
+		"st.a    r16, [sp, -4]   \n\t"
+		"st.a    r17, [sp, -4]   \n\t"
+		"st.a    r18, [sp, -4]   \n\t"
+		"st.a    r19, [sp, -4]   \n\t"
+		"st.a    r20, [sp, -4]   \n\t"
+		"st.a    r21, [sp, -4]   \n\t"
+		"st.a    r22, [sp, -4]   \n\t"
+		"st.a    r23, [sp, -4]   \n\t"
+		"st.a    r24, [sp, -4]   \n\t"
+#ifndef CONFIG_ARC_CURR_IN_REG
+		"st.a    r25, [sp, -4]   \n\t"
+#else
+		"sub     sp, sp, 4      \n\t"	/* usual r25 placeholder */
+#endif
+
+		/* set ksp of outgoing task in tsk->thread.ksp */
+#if KSP_WORD_OFF <= 255
+		"st.as   sp, [%3, %1]    \n\t"
+#else
+		/*
+		 * Workaround for NR_CPUS=4k
+		 * %1 is bigger than 255 (S9 offset for st.as)
+		 */
+		"add2    r24, %3, %1     \n\t"
+		"st      sp, [r24]       \n\t"
+#endif
+
+		/*
+		 * setup _current_task with incoming tsk.
+		 * optionally, set r25 to that as well
+		 * For SMP extra work to get to &_current_task[cpu]
+		 * (open coded SET_CURR_TASK_ON_CPU)
+		 */
+#ifndef CONFIG_SMP
+		"st  %2, [@_current_task]	\n\t"
+#else
+		"lr   r24, [identity]		\n\t"
+		"lsr  r24, r24, 8		\n\t"
+		"bmsk r24, r24, 7		\n\t"
+		"add2 r24, @_current_task, r24	\n\t"
+		"st   %2,  [r24]		\n\t"
+#endif
+#ifdef CONFIG_ARC_CURR_IN_REG
+		"mov r25, %2   \n\t"
+#endif
+
+		/* get ksp of incoming task from tsk->thread.ksp */
+		"ld.as  sp, [%2, %1]   \n\t"
+
+		/* start loading it's CALLEE reg file */
+
+#ifndef CONFIG_ARC_CURR_IN_REG
+		"ld.ab   r25, [sp, 4]   \n\t"
+#else
+		"add    sp, sp, 4       \n\t"
+#endif
+		"ld.ab   r24, [sp, 4]   \n\t"
+		"ld.ab   r23, [sp, 4]   \n\t"
+		"ld.ab   r22, [sp, 4]   \n\t"
+		"ld.ab   r21, [sp, 4]   \n\t"
+		"ld.ab   r20, [sp, 4]   \n\t"
+		"ld.ab   r19, [sp, 4]   \n\t"
+		"ld.ab   r18, [sp, 4]   \n\t"
+		"ld.ab   r17, [sp, 4]   \n\t"
+		"ld.ab   r16, [sp, 4]   \n\t"
+		"ld.ab   r15, [sp, 4]   \n\t"
+		"ld.ab   r14, [sp, 4]   \n\t"
+		"ld.ab   r13, [sp, 4]   \n\t"
+
+		/* last (ret value) = prev : although for ARC it mov r0, r0 */
+		"mov     %0, %3        \n\t"
+
+		/* FP/BLINK restore generated by gcc (standard func epilogue */
+
+		: "=r"(tmp)
+		: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
+		: "blink"
+	);
+
+	return (struct task_struct *)tmp;
+}
diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
new file mode 100644
index 000000000..02c461484
--- /dev/null
+++ b/arch/arc/kernel/ctx_sw_asm.S
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Vineetg: Aug 2009
+ *  -Moved core context switch macro out of entry.S into this file.
+ *  -This is the more "natural" hand written assembler
+ */
+
+#include <linux/linkage.h>
+#include <asm/entry.h>       /* For the SAVE_* macros */
+#include <asm/asm-offsets.h>
+
+#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
+
+;################### Low Level Context Switch ##########################
+
+	.section .sched.text,"ax",@progbits
+	.align 4
+	.global __switch_to
+	.type   __switch_to, @function
+__switch_to:
+	CFI_STARTPROC
+
+	/* Save regs on kernel mode stack of task */
+	st.a    blink, [sp, -4]
+	st.a    fp, [sp, -4]
+	SAVE_CALLEE_SAVED_KERNEL
+
+	/* Save the now KSP in task->thread.ksp */
+#if KSP_WORD_OFF  <= 255
+	st.as  sp, [r0, KSP_WORD_OFF]
+#else
+	/* Workaround for NR_CPUS=4k as ST.as can only take s9 offset */
+	add2	r24, r0, KSP_WORD_OFF
+	st	sp, [r24]
+#endif
+	/*
+	* Return last task in r0 (return reg)
+	* On ARC, Return reg = First Arg reg = r0.
+	* Since we already have last task in r0,
+	* don't need to do anything special to return it
+	*/
+
+	/*
+	 * switch to new task, contained in r1
+	 * Temp reg r3 is required to get the ptr to store val
+	 */
+	SET_CURR_TASK_ON_CPU  r1, r3
+
+	/* reload SP with kernel mode stack pointer in task->thread.ksp */
+	ld.as  sp, [r1, (TASK_THREAD + THREAD_KSP)/4]
+
+	/* restore the registers */
+	RESTORE_CALLEE_SAVED_KERNEL
+	ld.ab   fp, [sp, 4]
+	ld.ab   blink, [sp, 4]
+	j       [blink]
+
+END_CFI(__switch_to)
diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
new file mode 100644
index 000000000..721d465f1
--- /dev/null
+++ b/arch/arc/kernel/devtree.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Based on reduced version of METAG
+ */
+
+
+#include <linux/init.h>
+#include <linux/reboot.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <asm/mach_desc.h>
+
+#ifdef CONFIG_SERIAL_EARLYCON
+
+static unsigned int __initdata arc_base_baud;
+
+unsigned int __init arc_early_base_baud(void)
+{
+	return arc_base_baud/16;
+}
+
+static void __init arc_set_early_base_baud(unsigned long dt_root)
+{
+	if (of_flat_dt_is_compatible(dt_root, "abilis,arc-tb10x"))
+		arc_base_baud = 166666666;	/* Fixed 166.6MHz clk (TB10x) */
+	else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp") ||
+		 of_flat_dt_is_compatible(dt_root, "snps,hsdk"))
+		arc_base_baud = 33333333;	/* Fixed 33MHz clk (AXS10x & HSDK) */
+	else
+		arc_base_baud = 50000000;	/* Fixed default 50MHz */
+}
+#else
+#define arc_set_early_base_baud(dt_root)
+#endif
+
+static const void * __init arch_get_next_mach(const char *const **match)
+{
+	static const struct machine_desc *mdesc = __arch_info_begin;
+	const struct machine_desc *m = mdesc;
+
+	if (m >= __arch_info_end)
+		return NULL;
+
+	mdesc++;
+	*match = m->dt_compat;
+	return m;
+}
+
+/**
+ * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
+ * @dt:		virtual address pointer to dt blob
+ *
+ * If a dtb was passed to the kernel, then use it to choose the correct
+ * machine_desc and to setup the system.
+ */
+const struct machine_desc * __init setup_machine_fdt(void *dt)
+{
+	const struct machine_desc *mdesc;
+	unsigned long dt_root;
+
+	if (!early_init_dt_scan(dt))
+		return NULL;
+
+	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
+	if (!mdesc)
+		machine_halt();
+
+	dt_root = of_get_flat_dt_root();
+	arc_set_early_base_baud(dt_root);
+
+	return mdesc;
+}
diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c
new file mode 100644
index 000000000..ccc7e8c39
--- /dev/null
+++ b/arch/arc/kernel/disasm.c
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * several functions that help interpret ARC instructions
+ * used for unaligned accesses, kprobes and kgdb
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/types.h>
+#include <linux/kprobes.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <asm/disasm.h>
+
+#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_EMUL_UNALIGNED) || \
+	defined(CONFIG_KPROBES)
+
+/* disasm_instr: Analyses instruction at addr, stores
+ * findings in *state
+ */
+void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state,
+	int userspace, struct pt_regs *regs, struct callee_regs *cregs)
+{
+	int fieldA = 0;
+	int fieldC = 0, fieldCisReg = 0;
+	uint16_t word1 = 0, word0 = 0;
+	int subopcode, is_linked, op_format;
+	uint16_t *ins_ptr;
+	uint16_t ins_buf[4];
+	int bytes_not_copied = 0;
+
+	memset(state, 0, sizeof(struct disasm_state));
+
+	/* This fetches the upper part of the 32 bit instruction
+	 * in both the cases of Little Endian or Big Endian configurations. */
+	if (userspace) {
+		bytes_not_copied = copy_from_user(ins_buf,
+						(const void __user *) addr, 8);
+		if (bytes_not_copied > 6)
+			goto fault;
+		ins_ptr = ins_buf;
+	} else {
+		ins_ptr = (uint16_t *) addr;
+	}
+
+	word1 = *((uint16_t *)addr);
+
+	state->major_opcode = (word1 >> 11) & 0x1F;
+
+	/* Check if the instruction is 32 bit or 16 bit instruction */
+	if (state->major_opcode < 0x0B) {
+		if (bytes_not_copied > 4)
+			goto fault;
+		state->instr_len = 4;
+		word0 = *((uint16_t *)(addr+2));
+		state->words[0] = (word1 << 16) | word0;
+	} else {
+		state->instr_len = 2;
+		state->words[0] = word1;
+	}
+
+	/* Read the second word in case of limm */
+	word1 = *((uint16_t *)(addr + state->instr_len));
+	word0 = *((uint16_t *)(addr + state->instr_len + 2));
+	state->words[1] = (word1 << 16) | word0;
+
+	switch (state->major_opcode) {
+	case op_Bcc:
+		state->is_branch = 1;
+
+		/* unconditional branch s25, conditional branch s21 */
+		fieldA = (IS_BIT(state->words[0], 16)) ?
+			FIELD_s25(state->words[0]) :
+			FIELD_s21(state->words[0]);
+
+		state->delay_slot = IS_BIT(state->words[0], 5);
+		state->target = fieldA + (addr & ~0x3);
+		state->flow = direct_jump;
+		break;
+
+	case op_BLcc:
+		if (IS_BIT(state->words[0], 16)) {
+			/* Branch and Link*/
+			/* unconditional branch s25, conditional branch s21 */
+			fieldA = (IS_BIT(state->words[0], 17)) ?
+				(FIELD_s25(state->words[0]) & ~0x3) :
+				FIELD_s21(state->words[0]);
+
+			state->flow = direct_call;
+		} else {
+			/*Branch On Compare */
+			fieldA = FIELD_s9(state->words[0]) & ~0x3;
+			state->flow = direct_jump;
+		}
+
+		state->delay_slot = IS_BIT(state->words[0], 5);
+		state->target = fieldA + (addr & ~0x3);
+		state->is_branch = 1;
+		break;
+
+	case op_LD:  /* LD<zz> a,[b,s9] */
+		state->write = 0;
+		state->di = BITS(state->words[0], 11, 11);
+		if (state->di)
+			break;
+		state->x = BITS(state->words[0], 6, 6);
+		state->zz = BITS(state->words[0], 7, 8);
+		state->aa = BITS(state->words[0], 9, 10);
+		state->wb_reg = FIELD_B(state->words[0]);
+		if (state->wb_reg == REG_LIMM) {
+			state->instr_len += 4;
+			state->aa = 0;
+			state->src1 = state->words[1];
+		} else {
+			state->src1 = get_reg(state->wb_reg, regs, cregs);
+		}
+		state->src2 = FIELD_s9(state->words[0]);
+		state->dest = FIELD_A(state->words[0]);
+		state->pref = (state->dest == REG_LIMM);
+		break;
+
+	case op_ST:
+		state->write = 1;
+		state->di = BITS(state->words[0], 5, 5);
+		if (state->di)
+			break;
+		state->aa = BITS(state->words[0], 3, 4);
+		state->zz = BITS(state->words[0], 1, 2);
+		state->src1 = FIELD_C(state->words[0]);
+		if (state->src1 == REG_LIMM) {
+			state->instr_len += 4;
+			state->src1 = state->words[1];
+		} else {
+			state->src1 = get_reg(state->src1, regs, cregs);
+		}
+		state->wb_reg = FIELD_B(state->words[0]);
+		if (state->wb_reg == REG_LIMM) {
+			state->aa = 0;
+			state->instr_len += 4;
+			state->src2 = state->words[1];
+		} else {
+			state->src2 = get_reg(state->wb_reg, regs, cregs);
+		}
+		state->src3 = FIELD_s9(state->words[0]);
+		break;
+
+	case op_MAJOR_4:
+		subopcode = MINOR_OPCODE(state->words[0]);
+		switch (subopcode) {
+		case 32:	/* Jcc */
+		case 33:	/* Jcc.D */
+		case 34:	/* JLcc */
+		case 35:	/* JLcc.D */
+			is_linked = 0;
+
+			if (subopcode == 33 || subopcode == 35)
+				state->delay_slot = 1;
+
+			if (subopcode == 34 || subopcode == 35)
+				is_linked = 1;
+
+			fieldCisReg = 0;
+			op_format = BITS(state->words[0], 22, 23);
+			if (op_format == 0 || ((op_format == 3) &&
+				(!IS_BIT(state->words[0], 5)))) {
+				fieldC = FIELD_C(state->words[0]);
+
+				if (fieldC == REG_LIMM) {
+					fieldC = state->words[1];
+					state->instr_len += 4;
+				} else {
+					fieldCisReg = 1;
+				}
+			} else if (op_format == 1 || ((op_format == 3)
+				&& (IS_BIT(state->words[0], 5)))) {
+				fieldC = FIELD_C(state->words[0]);
+			} else  {
+				/* op_format == 2 */
+				fieldC = FIELD_s12(state->words[0]);
+			}
+
+			if (!fieldCisReg) {
+				state->target = fieldC;
+				state->flow = is_linked ?
+					direct_call : direct_jump;
+			} else {
+				state->target = get_reg(fieldC, regs, cregs);
+				state->flow = is_linked ?
+					indirect_call : indirect_jump;
+			}
+			state->is_branch = 1;
+			break;
+
+		case 40:	/* LPcc */
+			if (BITS(state->words[0], 22, 23) == 3) {
+				/* Conditional LPcc u7 */
+				fieldC = FIELD_C(state->words[0]);
+
+				fieldC = fieldC << 1;
+				fieldC += (addr & ~0x03);
+				state->is_branch = 1;
+				state->flow = direct_jump;
+				state->target = fieldC;
+			}
+			/* For Unconditional lp, next pc is the fall through
+			 * which is updated */
+			break;
+
+		case 48 ... 55:	/* LD a,[b,c] */
+			state->di = BITS(state->words[0], 15, 15);
+			if (state->di)
+				break;
+			state->x = BITS(state->words[0], 16, 16);
+			state->zz = BITS(state->words[0], 17, 18);
+			state->aa = BITS(state->words[0], 22, 23);
+			state->wb_reg = FIELD_B(state->words[0]);
+			if (state->wb_reg == REG_LIMM) {
+				state->instr_len += 4;
+				state->src1 = state->words[1];
+			} else {
+				state->src1 = get_reg(state->wb_reg, regs,
+						cregs);
+			}
+			state->src2 = FIELD_C(state->words[0]);
+			if (state->src2 == REG_LIMM) {
+				state->instr_len += 4;
+				state->src2 = state->words[1];
+			} else {
+				state->src2 = get_reg(state->src2, regs,
+					cregs);
+			}
+			state->dest = FIELD_A(state->words[0]);
+			if (state->dest == REG_LIMM)
+				state->pref = 1;
+			break;
+
+		case 10:	/* MOV */
+			/* still need to check for limm to extract instr len */
+			/* MOV is special case because it only takes 2 args */
+			switch (BITS(state->words[0], 22, 23)) {
+			case 0: /* OP a,b,c */
+				if (FIELD_C(state->words[0]) == REG_LIMM)
+					state->instr_len += 4;
+				break;
+			case 1: /* OP a,b,u6 */
+				break;
+			case 2: /* OP b,b,s12 */
+				break;
+			case 3: /* OP.cc b,b,c/u6 */
+				if ((!IS_BIT(state->words[0], 5)) &&
+				    (FIELD_C(state->words[0]) == REG_LIMM))
+					state->instr_len += 4;
+				break;
+			}
+			break;
+
+
+		default:
+			/* Not a Load, Jump or Loop instruction */
+			/* still need to check for limm to extract instr len */
+			switch (BITS(state->words[0], 22, 23)) {
+			case 0: /* OP a,b,c */
+				if ((FIELD_B(state->words[0]) == REG_LIMM) ||
+				    (FIELD_C(state->words[0]) == REG_LIMM))
+					state->instr_len += 4;
+				break;
+			case 1: /* OP a,b,u6 */
+				break;
+			case 2: /* OP b,b,s12 */
+				break;
+			case 3: /* OP.cc b,b,c/u6 */
+				if ((!IS_BIT(state->words[0], 5)) &&
+				   ((FIELD_B(state->words[0]) == REG_LIMM) ||
+				    (FIELD_C(state->words[0]) == REG_LIMM)))
+					state->instr_len += 4;
+				break;
+			}
+			break;
+		}
+		break;
+
+	/* 16 Bit Instructions */
+	case op_LD_ADD: /* LD_S|LDB_S|LDW_S a,[b,c] */
+		state->zz = BITS(state->words[0], 3, 4);
+		state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src2 = get_reg(FIELD_S_C(state->words[0]), regs, cregs);
+		state->dest = FIELD_S_A(state->words[0]);
+		break;
+
+	case op_ADD_MOV_CMP:
+		/* check for limm, ignore mov_s h,b (== mov_s 0,b) */
+		if ((BITS(state->words[0], 3, 4) < 3) &&
+		    (FIELD_S_H(state->words[0]) == REG_LIMM))
+			state->instr_len += 4;
+		break;
+
+	case op_S:
+		subopcode = BITS(state->words[0], 5, 7);
+		switch (subopcode) {
+		case 0:	/* j_s */
+		case 1:	/* j_s.d */
+		case 2:	/* jl_s */
+		case 3:	/* jl_s.d */
+			state->target = get_reg(FIELD_S_B(state->words[0]),
+						regs, cregs);
+			state->delay_slot = subopcode & 1;
+			state->flow = (subopcode >= 2) ?
+				direct_call : indirect_jump;
+			break;
+		case 7:
+			switch (BITS(state->words[0], 8, 10)) {
+			case 4:	/* jeq_s [blink] */
+			case 5:	/* jne_s [blink] */
+			case 6:	/* j_s [blink] */
+			case 7:	/* j_s.d [blink] */
+				state->delay_slot = (subopcode == 7);
+				state->flow = indirect_jump;
+				state->target = get_reg(31, regs, cregs);
+			default:
+				break;
+			}
+		default:
+			break;
+		}
+		break;
+
+	case op_LD_S:	/* LD_S c, [b, u7] */
+		state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src2 = FIELD_S_u7(state->words[0]);
+		state->dest = FIELD_S_C(state->words[0]);
+		break;
+
+	case op_LDB_S:
+	case op_STB_S:
+		/* no further handling required as byte accesses should not
+		 * cause an unaligned access exception */
+		state->zz = 1;
+		break;
+
+	case op_LDWX_S:	/* LDWX_S c, [b, u6] */
+		state->x = 1;
+		fallthrough;
+
+	case op_LDW_S:	/* LDW_S c, [b, u6] */
+		state->zz = 2;
+		state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src2 = FIELD_S_u6(state->words[0]);
+		state->dest = FIELD_S_C(state->words[0]);
+		break;
+
+	case op_ST_S:	/* ST_S c, [b, u7] */
+		state->write = 1;
+		state->src1 = get_reg(FIELD_S_C(state->words[0]), regs, cregs);
+		state->src2 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src3 = FIELD_S_u7(state->words[0]);
+		break;
+
+	case op_STW_S:	/* STW_S c,[b,u6] */
+		state->write = 1;
+		state->zz = 2;
+		state->src1 = get_reg(FIELD_S_C(state->words[0]), regs, cregs);
+		state->src2 = get_reg(FIELD_S_B(state->words[0]), regs, cregs);
+		state->src3 = FIELD_S_u6(state->words[0]);
+		break;
+
+	case op_SP:	/* LD_S|LDB_S b,[sp,u7], ST_S|STB_S b,[sp,u7] */
+		/* note: we are ignoring possibility of:
+		 * ADD_S, SUB_S, PUSH_S, POP_S as these should not
+		 * cause unaligned exception anyway */
+		state->write = BITS(state->words[0], 6, 6);
+		state->zz = BITS(state->words[0], 5, 5);
+		if (state->zz)
+			break;	/* byte accesses should not come here */
+		if (!state->write) {
+			state->src1 = get_reg(28, regs, cregs);
+			state->src2 = FIELD_S_u7(state->words[0]);
+			state->dest = FIELD_S_B(state->words[0]);
+		} else {
+			state->src1 = get_reg(FIELD_S_B(state->words[0]), regs,
+					cregs);
+			state->src2 = get_reg(28, regs, cregs);
+			state->src3 = FIELD_S_u7(state->words[0]);
+		}
+		break;
+
+	case op_GP:	/* LD_S|LDB_S|LDW_S r0,[gp,s11/s9/s10] */
+		/* note: ADD_S r0, gp, s11 is ignored */
+		state->zz = BITS(state->words[0], 9, 10);
+		state->src1 = get_reg(26, regs, cregs);
+		state->src2 = state->zz ? FIELD_S_s10(state->words[0]) :
+			FIELD_S_s11(state->words[0]);
+		state->dest = 0;
+		break;
+
+	case op_Pcl:	/* LD_S b,[pcl,u10] */
+		state->src1 = regs->ret & ~3;
+		state->src2 = FIELD_S_u10(state->words[0]);
+		state->dest = FIELD_S_B(state->words[0]);
+		break;
+
+	case op_BR_S:
+		state->target = FIELD_S_s8(state->words[0]) + (addr & ~0x03);
+		state->flow = direct_jump;
+		state->is_branch = 1;
+		break;
+
+	case op_B_S:
+		fieldA = (BITS(state->words[0], 9, 10) == 3) ?
+			FIELD_S_s7(state->words[0]) :
+			FIELD_S_s10(state->words[0]);
+		state->target = fieldA + (addr & ~0x03);
+		state->flow = direct_jump;
+		state->is_branch = 1;
+		break;
+
+	case op_BL_S:
+		state->target = FIELD_S_s13(state->words[0]) + (addr & ~0x03);
+		state->flow = direct_call;
+		state->is_branch = 1;
+		break;
+
+	default:
+		break;
+	}
+
+	if (bytes_not_copied <= (8 - state->instr_len))
+		return;
+
+fault:	state->fault = 1;
+}
+
+long __kprobes get_reg(int reg, struct pt_regs *regs,
+		       struct callee_regs *cregs)
+{
+	long *p;
+
+#if defined(CONFIG_ISA_ARCOMPACT)
+	if (reg <= 12) {
+		p = &regs->r0;
+		return p[-reg];
+	}
+#else /* CONFIG_ISA_ARCV2 */
+	if (reg <= 11) {
+		p = &regs->r0;
+		return p[reg];
+	}
+
+	if (reg == 12)
+		return regs->r12;
+	if (reg == 30)
+		return regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	if (reg == 58)
+		return regs->r58;
+	if (reg == 59)
+		return regs->r59;
+#endif
+#endif
+	if (cregs && (reg <= 25)) {
+		p = &cregs->r13;
+		return p[13 - reg];
+	}
+
+	if (reg == 26)
+		return regs->r26;
+	if (reg == 27)
+		return regs->fp;
+	if (reg == 28)
+		return regs->sp;
+	if (reg == 31)
+		return regs->blink;
+
+	return 0;
+}
+
+void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
+		struct callee_regs *cregs)
+{
+	long *p;
+
+#if defined(CONFIG_ISA_ARCOMPACT)
+	switch (reg) {
+	case 0 ... 12:
+		p = &regs->r0;
+		p[-reg] = val;
+		break;
+	case 13 ... 25:
+		if (cregs) {
+			p = &cregs->r13;
+			p[13 - reg] = val;
+		}
+		break;
+	case 26:
+		regs->r26 = val;
+		break;
+	case 27:
+		regs->fp = val;
+		break;
+	case 28:
+		regs->sp = val;
+		break;
+	case 31:
+		regs->blink = val;
+		break;
+	default:
+		break;
+	}
+#else /* CONFIG_ISA_ARCV2 */
+	switch (reg) {
+	case 0 ... 11:
+		p = &regs->r0;
+		p[reg] = val;
+		break;
+	case 12:
+		regs->r12 = val;
+		break;
+	case 13 ... 25:
+		if (cregs) {
+			p = &cregs->r13;
+			p[13 - reg] = val;
+		}
+		break;
+	case 26:
+		regs->r26 = val;
+		break;
+	case 27:
+		regs->fp = val;
+		break;
+	case 28:
+		regs->sp = val;
+		break;
+	case 30:
+		regs->r30 = val;
+		break;
+	case 31:
+		regs->blink = val;
+		break;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	case 58:
+		regs->r58 = val;
+		break;
+	case 59:
+		regs->r59 = val;
+		break;
+#endif
+	default:
+		break;
+	}
+#endif
+}
+
+/*
+ * Disassembles the insn at @pc and sets @next_pc to next PC (which could be
+ * @pc +2/4/6 (ARCompact ISA allows free intermixing of 16/32 bit insns).
+ *
+ * If @pc is a branch
+ *	-@tgt_if_br is set to branch target.
+ *	-If branch has delay slot, @next_pc updated with actual next PC.
+ */
+int __kprobes disasm_next_pc(unsigned long pc, struct pt_regs *regs,
+			     struct callee_regs *cregs,
+			     unsigned long *next_pc, unsigned long *tgt_if_br)
+{
+	struct disasm_state instr;
+
+	disasm_instr(pc, &instr, 0, regs, cregs);
+
+	*next_pc = pc + instr.instr_len;
+
+	/* Instruction with possible two targets branch, jump and loop */
+	if (instr.is_branch)
+		*tgt_if_br = instr.target;
+
+	/* For the instructions with delay slots, the fall through is the
+	 * instruction following the instruction in delay slot.
+	 */
+	 if (instr.delay_slot) {
+		struct disasm_state instr_d;
+
+		disasm_instr(*next_pc, &instr_d, 0, regs, cregs);
+
+		*next_pc += instr_d.instr_len;
+	 }
+
+	 /* Zero Overhead Loop - end of the loop */
+	if (!(regs->status32 & STATUS32_L) && (*next_pc == regs->lp_end)
+		&& (regs->lp_count > 1)) {
+		*next_pc = regs->lp_start;
+	}
+
+	return instr.is_branch;
+}
+
+#endif /* CONFIG_KGDB || CONFIG_ARC_EMUL_UNALIGNED || CONFIG_KPROBES */
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
new file mode 100644
index 000000000..a7e6a2174
--- /dev/null
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -0,0 +1,264 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ARCv2 ISA based core Low Level Intr/Traps/Exceptions(non-TLB) Handling
+ *
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/linkage.h>   /* ARC_{EXTRY,EXIT} */
+#include <asm/entry.h>       /* SAVE_ALL_{INT1,INT2,TRAP...} */
+#include <asm/errno.h>
+#include <asm/arcregs.h>
+#include <asm/irqflags.h>
+#include <asm/mmu.h>
+
+; A maximum number of supported interrupts in the core interrupt controller.
+; This number is not equal to the maximum interrupt number (256) because
+; first 16 lines are reserved for exceptions and are not configurable.
+#define NR_CPU_IRQS	240
+
+	.cpu HS
+
+#define VECTOR	.word
+
+;############################ Vector Table #################################
+
+	.section .vector,"a",@progbits
+	.align 4
+
+# Initial 16 slots are Exception Vectors
+VECTOR	res_service		; Reset Vector
+VECTOR	mem_service		; Mem exception
+VECTOR	instr_service		; Instrn Error
+VECTOR	EV_MachineCheck		; Fatal Machine check
+VECTOR	EV_TLBMissI		; Intruction TLB miss
+VECTOR	EV_TLBMissD		; Data TLB miss
+VECTOR	EV_TLBProtV		; Protection Violation
+VECTOR	EV_PrivilegeV		; Privilege Violation
+VECTOR	EV_SWI			; Software Breakpoint
+VECTOR	EV_Trap			; Trap exception
+VECTOR	EV_Extension		; Extn Instruction Exception
+VECTOR	EV_DivZero		; Divide by Zero
+VECTOR	EV_DCError		; Data Cache Error
+VECTOR	EV_Misaligned		; Misaligned Data Access
+VECTOR	reserved		; Reserved slots
+VECTOR	reserved		; Reserved slots
+
+# Begin Interrupt Vectors
+VECTOR	handle_interrupt	; (16) Timer0
+VECTOR	handle_interrupt	; unused (Timer1)
+VECTOR	handle_interrupt	; unused (WDT)
+VECTOR	handle_interrupt	; (19) Inter core Interrupt (IPI)
+VECTOR	handle_interrupt	; (20) perf Interrupt
+VECTOR	handle_interrupt	; (21) Software Triggered Intr (Self IPI)
+VECTOR	handle_interrupt	; unused
+VECTOR	handle_interrupt	; (23) unused
+# End of fixed IRQs
+
+.rept NR_CPU_IRQS - 8
+	VECTOR	handle_interrupt
+.endr
+
+	.section .text, "ax",@progbits
+
+reserved:
+	flag 1		; Unexpected event, halt
+
+;##################### Interrupt Handling ##############################
+
+ENTRY(handle_interrupt)
+
+	INTERRUPT_PROLOGUE
+
+	# irq control APIs local_irq_save/restore/disable/enable fiddle with
+	# global interrupt enable bits in STATUS32 (.IE for 1 prio, .E[] for 2 prio)
+	# However a taken interrupt doesn't clear these bits. Thus irqs_disabled()
+	# query in hard ISR path would return false (since .IE is set) which would
+	# trips genirq interrupt handling asserts.
+	#
+	# So do a "soft" disable of interrutps here.
+	#
+	# Note this disable is only for consistent book-keeping as further interrupts
+	# will be disabled anyways even w/o this. Hardware tracks active interrupts
+	# seperately in AUX_IRQ_ACT.active and will not take new interrupts
+	# unless this one returns (or higher prio becomes pending in 2-prio scheme)
+
+	IRQ_DISABLE
+
+	; icause is banked: one per priority level
+	; so a higher prio interrupt taken here won't clobber prev prio icause
+	lr  r0, [ICAUSE]
+	mov   blink, ret_from_exception
+
+	b.d  arch_do_IRQ
+	mov r1, sp
+
+END(handle_interrupt)
+
+;################### Non TLB Exception Handling #############################
+
+ENTRY(EV_SWI)
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
+END(EV_SWI)
+
+ENTRY(EV_DivZero)
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
+END(EV_DivZero)
+
+ENTRY(EV_DCError)
+	; TODO: implement this
+	EXCEPTION_PROLOGUE
+	b   ret_from_exception
+END(EV_DCError)
+
+; ---------------------------------------------
+; Memory Error Exception Handler
+;   - Unlike ARCompact, handles Bus errors for both User/Kernel mode,
+;     Instruction fetch or Data access, under a single Exception Vector
+; ---------------------------------------------
+
+ENTRY(mem_service)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN
+
+	bl  do_memory_error
+	b   ret_from_exception
+END(mem_service)
+
+ENTRY(EV_Misaligned)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]	; Faulting Data address
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN
+
+	SAVE_CALLEE_SAVED_USER
+	mov r2, sp              ; callee_regs
+
+	bl  do_misaligned_access
+
+	; TBD: optimize - do this only if a callee reg was involved
+	; either a dst of emulated LD/ST or src with address-writeback
+	RESTORE_CALLEE_SAVED_USER
+
+	b   ret_from_exception
+END(EV_Misaligned)
+
+; ---------------------------------------------
+; Protection Violation Exception Handler
+; ---------------------------------------------
+
+ENTRY(EV_TLBProtV)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]	; Faulting Data address
+	mov r1, sp	; pt_regs
+
+	FAKE_RET_FROM_EXCPN
+
+	mov blink, ret_from_exception
+	b   do_page_fault
+
+END(EV_TLBProtV)
+
+; From Linux standpoint Slow Path I/D TLB Miss is same a ProtV as they
+; need to call do_page_fault().
+; ECR in pt_regs provides whether access was R/W/X
+
+.global        call_do_page_fault
+.set call_do_page_fault, EV_TLBProtV
+
+;############# Common Handlers for ARCompact and ARCv2 ##############
+
+#include "entry.S"
+
+;############# Return from Intr/Excp/Trap (ARCv2 ISA Specifics) ##############
+;
+; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap)
+; IRQ shd definitely not happen between now and rtie
+; All 2 entry points to here already disable interrupts
+
+.Lrestore_regs:
+restore_regs:
+
+	# Interrpts are actually disabled from this point on, but will get
+	# reenabled after we return from interrupt/exception.
+	# But irq tracer needs to be told now...
+	TRACE_ASM_IRQ_ENABLE
+
+	ld	r0, [sp, PT_status32]	; U/K mode at time of entry
+	lr	r10, [AUX_IRQ_ACT]
+
+	bmsk	r11, r10, 15		; extract AUX_IRQ_ACT.active
+	breq	r11, 0, .Lexcept_ret	; No intr active, ret from Exception
+
+;####### Return from Intr #######
+
+.Lisr_ret:
+
+debug_marker_l1:
+	; bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+	btst	r0, STATUS_DE_BIT		; Z flag set if bit clear
+	bnz	.Lintr_ret_to_delay_slot	; branch if STATUS_DE_BIT set
+
+	; Handle special case #1: (Entry via Exception, Return via IRQ)
+	;
+	; Exception in U mode, preempted in kernel, Intr taken (K mode), orig
+	; task now returning to U mode (riding the Intr)
+	; AUX_IRQ_ACTIVE won't have U bit set (since intr in K mode), hence SP
+	; won't be switched to correct U mode value (from AUX_SP)
+	; So force AUX_IRQ_ACT.U for such a case
+
+	btst	r0, STATUS_U_BIT		; Z flag set if K (Z clear for U)
+	bset.nz	r11, r11, AUX_IRQ_ACT_BIT_U	; NZ means U
+	sr	r11, [AUX_IRQ_ACT]
+
+	INTERRUPT_EPILOGUE
+	rtie
+
+;####### Return from Exception / pure kernel mode #######
+
+.Lexcept_ret:	; Expects r0 has PT_status32
+
+debug_marker_syscall:
+	EXCEPTION_EPILOGUE
+	rtie
+
+;####### Return from Intr to insn in delay slot #######
+
+; Handle special case #2: (Entry via Exception in Delay Slot, Return via IRQ)
+;
+; Intr returning to a Delay Slot (DS) insn
+; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
+; entry was via Exception in DS which got preempted in kernel).
+;
+; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround
+;
+; Solution is to drop out of interrupt context into pure kernel mode
+; and return from pure kernel mode which does right things for delay slot
+
+.Lintr_ret_to_delay_slot:
+debug_marker_ds:
+
+	ld	r2, [@intr_to_DE_cnt]
+	add	r2, r2, 1
+	st	r2, [@intr_to_DE_cnt]
+
+	; drop out of interrupt context (clear AUX_IRQ_ACT.active)
+	bmskn	r11, r10, 15
+	sr	r11, [AUX_IRQ_ACT]
+	b	.Lexcept_ret
+
+END(ret_from_exception)
diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S
new file mode 100644
index 000000000..5cb0cd7e4
--- /dev/null
+++ b/arch/arc/kernel/entry-compact.S
@@ -0,0 +1,403 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Low Level Interrupts/Traps/Exceptions(non-TLB) Handling for ARCompact ISA
+ *
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * vineetg: May 2011
+ *  -Userspace unaligned access emulation
+ *
+ * vineetg: Feb 2011 (ptrace low level code fixes)
+ *  -traced syscall return code (r0) was not saved into pt_regs for restoring
+ *   into user reg-file when traded task rets to user space.
+ *  -syscalls needing arch-wrappers (mainly for passing sp as pt_regs)
+ *   were not invoking post-syscall trace hook (jumping directly into
+ *   ret_from_system_call)
+ *
+ * vineetg: Nov 2010:
+ *  -Vector table jumps (@8 bytes) converted into branches (@4 bytes)
+ *  -To maintain the slot size of 8 bytes/vector, added nop, which is
+ *   not executed at runtime.
+ *
+ * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK)
+ *  -do_signal()invoked upon TIF_RESTORE_SIGMASK as well
+ *  -Wrappers for sys_{,rt_}sigsuspend() no longer needed as they don't
+ *   need ptregs anymore
+ *
+ * Vineetg: Oct 2009
+ *  -In a rare scenario, Process gets a Priv-V exception and gets scheduled
+ *   out. Since we don't do FAKE RTIE for Priv-V, CPU exception state remains
+ *   active (AE bit enabled).  This causes a double fault for a subseq valid
+ *   exception. Thus FAKE RTIE needed in low level Priv-Violation handler.
+ *   Instr Error could also cause similar scenario, so same there as well.
+ *
+ * Vineetg: March 2009 (Supporting 2 levels of Interrupts)
+ *
+ * Vineetg: Aug 28th 2008: Bug #94984
+ *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
+ *   Normally CPU does this automatically, however when doing FAKE rtie,
+ *   we need to explicitly do this. The problem in macros
+ *   FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
+ *   was being "CLEARED" rather then "SET". Since it is Loop INHIBIT Bit,
+ *   setting it and not clearing it clears ZOL context
+ *
+ * Vineetg: May 16th, 2008
+ *  - r25 now contains the Current Task when in kernel
+ *
+ * Vineetg: Dec 22, 2007
+ *    Minor Surgery of Low Level ISR to make it SMP safe
+ *    - MMU_SCRATCH0 Reg used for freeing up r9 in Level 1 ISR
+ *    - _current_task is made an array of NR_CPUS
+ *    - Access of _current_task wrapped inside a macro so that if hardware
+ *       team agrees for a dedicated reg, no other code is touched
+ *
+ * Amit Bhor, Rahul Trivedi, Kanika Nema, Sameer Dhavale : Codito Tech 2004
+ */
+
+#include <linux/errno.h>
+#include <linux/linkage.h>	/* {ENTRY,EXIT} */
+#include <asm/entry.h>
+#include <asm/irqflags.h>
+
+	.cpu A7
+
+;############################ Vector Table #################################
+
+.macro VECTOR  lbl
+#if 1   /* Just in case, build breaks */
+	j   \lbl
+#else
+	b   \lbl
+	nop
+#endif
+.endm
+
+	.section .vector, "ax",@progbits
+	.align 4
+
+/* Each entry in the vector table must occupy 2 words. Since it is a jump
+ * across sections (.vector to .text) we are guaranteed that 'j somewhere'
+ * will use the 'j limm' form of the instruction as long as somewhere is in
+ * a section other than .vector.
+ */
+
+; ********* Critical System Events **********************
+VECTOR   res_service             ; 0x0, Reset Vector	(0x0)
+VECTOR   mem_service             ; 0x8, Mem exception   (0x1)
+VECTOR   instr_service           ; 0x10, Instrn Error   (0x2)
+
+; ******************** Device ISRs **********************
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+VECTOR   handle_interrupt_level2
+#else
+VECTOR   handle_interrupt_level1
+#endif
+
+.rept   28
+VECTOR   handle_interrupt_level1 ; Other devices
+.endr
+
+/* FOR ARC600: timer = 0x3, uart = 0x8, emac = 0x10 */
+
+; ******************** Exceptions **********************
+VECTOR   EV_MachineCheck         ; 0x100, Fatal Machine check   (0x20)
+VECTOR   EV_TLBMissI             ; 0x108, Instruction TLB miss  (0x21)
+VECTOR   EV_TLBMissD             ; 0x110, Data TLB miss         (0x22)
+VECTOR   EV_TLBProtV             ; 0x118, Protection Violation  (0x23)
+				 ;         or Misaligned Access
+VECTOR   EV_PrivilegeV           ; 0x120, Privilege Violation   (0x24)
+VECTOR   EV_Trap                 ; 0x128, Trap exception        (0x25)
+VECTOR   EV_Extension            ; 0x130, Extn Instruction Excp (0x26)
+
+.rept   24
+VECTOR   reserved                ; Reserved Exceptions
+.endr
+
+
+;##################### Scratch Mem for IRQ stack switching #############
+
+ARCFP_DATA int1_saved_reg
+	.align 32
+	.type   int1_saved_reg, @object
+	.size   int1_saved_reg, 4
+int1_saved_reg:
+	.zero 4
+
+/* Each Interrupt level needs its own scratch */
+ARCFP_DATA int2_saved_reg
+	.type   int2_saved_reg, @object
+	.size   int2_saved_reg, 4
+int2_saved_reg:
+	.zero 4
+
+; ---------------------------------------------
+	.section .text, "ax",@progbits
+
+
+reserved:
+	flag 1		; Unexpected event, halt
+
+;##################### Interrupt Handling ##############################
+
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+; ---------------------------------------------
+;  Level 2 ISR: Can interrupt a Level 1 ISR
+; ---------------------------------------------
+ENTRY(handle_interrupt_level2)
+
+	INTERRUPT_PROLOGUE 2
+
+	;------------------------------------------------------
+	; if L2 IRQ interrupted a L1 ISR, disable preemption
+	;
+	; This is to avoid a potential L1-L2-L1 scenario
+	;  -L1 IRQ taken
+	;  -L2 interrupts L1 (before L1 ISR could run)
+	;  -preemption off IRQ, user task in syscall picked to run
+	;  -RTIE to userspace
+	;	Returns from L2 context fine
+	;	But both L1 and L2 re-enabled, so another L1 can be taken
+	;	while prev L1 is still unserviced
+	;
+	;------------------------------------------------------
+
+	; L2 interrupting L1 implies both L2 and L1 active
+	; However both A2 and A1 are NOT set in STATUS32, thus
+	; need to check STATUS32_L2 to determine if L1 was active
+
+	ld r9, [sp, PT_status32]        ; get statu32_l2 (saved in pt_regs)
+	bbit0 r9, STATUS_A1_BIT, 1f     ; L1 not active when L2 IRQ, so normal
+
+	; bump thread_info->preempt_count (Disable preemption)
+	GET_CURR_THR_INFO_FROM_SP   r10
+	ld      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+	add     r9, r9, 1
+	st      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+
+1:
+	;------------------------------------------------------
+	; setup params for Linux common ISR and invoke it
+	;------------------------------------------------------
+	lr  r0, [icause2]
+	and r0, r0, 0x1f
+
+	bl.d  @arch_do_IRQ
+	mov r1, sp
+
+	mov r8,0x2
+	sr r8, [AUX_IRQ_LV12]       ; clear bit in Sticky Status Reg
+
+	b   ret_from_exception
+
+END(handle_interrupt_level2)
+
+#endif
+
+; ---------------------------------------------
+; User Mode Memory Bus Error Interrupt Handler
+; (Kernel mode memory errors handled via separate exception vectors)
+; ---------------------------------------------
+ENTRY(mem_service)
+
+	INTERRUPT_PROLOGUE 2
+
+	mov r0, ilink2
+	mov r1, sp
+
+	; User process needs to be killed with SIGBUS, but first need to get
+	; out of the L2 interrupt context (drop to pure kernel mode) and jump
+	; off to "C" code where SIGBUS in enqueued
+	lr  r3, [status32]
+	bclr r3, r3, STATUS_A2_BIT
+	or  r3, r3, (STATUS_E1_MASK|STATUS_E2_MASK)
+	sr  r3, [status32_l2]
+	mov ilink2, 1f
+	rtie
+1:
+	bl  do_memory_error
+	b   ret_from_exception
+END(mem_service)
+
+; ---------------------------------------------
+;  Level 1 ISR
+; ---------------------------------------------
+ENTRY(handle_interrupt_level1)
+
+	INTERRUPT_PROLOGUE 1
+
+	lr  r0, [icause1]
+	and r0, r0, 0x1f
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	; icause1 needs to be read early, before calling tracing, which
+	; can clobber scratch regs, hence use of stack to stash it
+	push r0
+	TRACE_ASM_IRQ_DISABLE
+	pop  r0
+#endif
+
+	bl.d  @arch_do_IRQ
+	mov r1, sp
+
+	mov r8,0x1
+	sr r8, [AUX_IRQ_LV12]       ; clear bit in Sticky Status Reg
+
+	b   ret_from_exception
+END(handle_interrupt_level1)
+
+;################### Non TLB Exception Handling #############################
+
+; ---------------------------------------------
+; Protection Violation Exception Handler
+; ---------------------------------------------
+
+ENTRY(EV_TLBProtV)
+
+	EXCEPTION_PROLOGUE
+
+	mov r2, r10	; ECR set into r10 already
+	lr  r0, [efa]	; Faulting Data address (not part of pt_regs saved above)
+
+	; Exception auto-disables further Intr/exceptions.
+	; Re-enable them by pretending to return from exception
+	; (so rest of handler executes in pure K mode)
+
+	FAKE_RET_FROM_EXCPN
+
+	mov   r1, sp	; Handle to pt_regs
+
+	;------ (5) Type of Protection Violation? ----------
+	;
+	; ProtV Hardware Exception is triggered for Access Faults of 2 types
+	;   -Access Violation	: 00_23_(00|01|02|03)_00
+	;			         x  r  w  r+w
+	;   -Unaligned Access	: 00_23_04_00
+	;
+	bbit1 r2, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
+
+	;========= (6a) Access Violation Processing ========
+	bl  do_page_fault
+	b   ret_from_exception
+
+	;========== (6b) Non aligned access ============
+4:
+
+	SAVE_CALLEE_SAVED_USER
+	mov r2, sp              ; callee_regs
+
+	bl  do_misaligned_access
+
+	; TBD: optimize - do this only if a callee reg was involved
+	; either a dst of emulated LD/ST or src with address-writeback
+	RESTORE_CALLEE_SAVED_USER
+
+	b   ret_from_exception
+
+END(EV_TLBProtV)
+
+; Wrapper for Linux page fault handler called from EV_TLBMiss*
+; Very similar to ProtV handler case (6a) above, but avoids the extra checks
+; for Misaligned access
+;
+ENTRY(call_do_page_fault)
+
+	EXCEPTION_PROLOGUE
+	lr  r0, [efa]	; Faulting Data address
+	mov   r1, sp
+	FAKE_RET_FROM_EXCPN
+
+	mov blink, ret_from_exception
+	b  do_page_fault
+
+END(call_do_page_fault)
+
+;############# Common Handlers for ARCompact and ARCv2 ##############
+
+#include "entry.S"
+
+;############# Return from Intr/Excp/Trap (ARC Specifics) ##############
+;
+; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap)
+; IRQ shd definitely not happen between now and rtie
+; All 2 entry points to here already disable interrupts
+
+.Lrestore_regs:
+
+	# Interrupts are actually disabled from this point on, but will get
+	# reenabled after we return from interrupt/exception.
+	# But irq tracer needs to be told now...
+	TRACE_ASM_IRQ_ENABLE
+
+	lr	r10, [status32]
+
+	; Restore REG File. In case multiple Events outstanding,
+	; use the same priority as rtie: EXCPN, L2 IRQ, L1 IRQ, None
+	; Note that we use realtime STATUS32 (not pt_regs->status32) to
+	; decide that.
+
+	and.f	0, r10, (STATUS_A1_MASK|STATUS_A2_MASK)
+	bz	.Lexcep_or_pure_K_ret
+
+	; Returning from Interrupts (Level 1 or 2)
+
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+
+	; Level 2 interrupt return Path - from hardware standpoint
+	bbit0  r10, STATUS_A2_BIT, not_level2_interrupt
+
+	;------------------------------------------------------------------
+	; However the context returning might not have taken L2 intr itself
+	; e.g. Task'A' user-code -> L2 intr -> schedule -> 'B' user-code ret
+	; Special considerations needed for the context which took L2 intr
+
+	ld   r9, [sp, PT_event]        ; Ensure this is L2 intr context
+	brne r9, event_IRQ2, 149f
+
+	;------------------------------------------------------------------
+	; if L2 IRQ interrupted an L1 ISR,  we'd disabled preemption earlier
+	; so that sched doesn't move to new task, causing L1 to be delayed
+	; undeterministically. Now that we've achieved that, let's reset
+	; things to what they were, before returning from L2 context
+	;----------------------------------------------------------------
+
+	ld r9, [sp, PT_status32]       ; get statu32_l2 (saved in pt_regs)
+	bbit0 r9, STATUS_A1_BIT, 149f  ; L1 not active when L2 IRQ, so normal
+
+	; decrement thread_info->preempt_count (re-enable preemption)
+	GET_CURR_THR_INFO_FROM_SP   r10
+	ld      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+
+	; paranoid check, given A1 was active when A2 happened, preempt count
+	; must not be 0 because we would have incremented it.
+	; If this does happen we simply HALT as it means a BUG !!!
+	cmp     r9, 0
+	bnz     2f
+	flag 1
+
+2:
+	sub     r9, r9, 1
+	st      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+
+149:
+	INTERRUPT_EPILOGUE 2	; return from level 2 interrupt
+debug_marker_l2:
+	rtie
+
+not_level2_interrupt:
+
+#endif
+
+	INTERRUPT_EPILOGUE 1	; return from level 1 interrupt
+debug_marker_l1:
+	rtie
+
+.Lexcep_or_pure_K_ret:
+
+	;this case is for syscalls or Exceptions or pure kernel mode
+
+	EXCEPTION_EPILOGUE
+debug_marker_syscall:
+	rtie
+
+END(ret_from_exception)
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
new file mode 100644
index 000000000..54e91df67
--- /dev/null
+++ b/arch/arc/kernel/entry.S
@@ -0,0 +1,369 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Common Low Level Interrupts/Traps/Exceptions(non-TLB) Handling for ARC
+ * (included from entry-<isa>.S
+ *
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*------------------------------------------------------------------
+ *    Function                            ABI
+ *------------------------------------------------------------------
+ *
+ *  Arguments                           r0 - r7
+ *  Caller Saved Registers              r0 - r12
+ *  Callee Saved Registers              r13- r25
+ *  Global Pointer (gp)                 r26
+ *  Frame Pointer (fp)                  r27
+ *  Stack Pointer (sp)                  r28
+ *  Branch link register (blink)        r31
+ *------------------------------------------------------------------
+ */
+
+;################### Special Sys Call Wrappers ##########################
+
+ENTRY(sys_clone_wrapper)
+	SAVE_CALLEE_SAVED_USER
+	bl  @sys_clone
+	DISCARD_CALLEE_SAVED_USER
+
+	GET_CURR_THR_INFO_FLAGS   r10
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys_exit
+
+	b .Lret_from_system_call
+END(sys_clone_wrapper)
+
+ENTRY(sys_clone3_wrapper)
+	SAVE_CALLEE_SAVED_USER
+	bl  @sys_clone3
+	DISCARD_CALLEE_SAVED_USER
+
+	GET_CURR_THR_INFO_FLAGS   r10
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys_exit
+
+	b .Lret_from_system_call
+END(sys_clone3_wrapper)
+
+ENTRY(ret_from_fork)
+	; when the forked child comes here from the __switch_to function
+	; r0 has the last task pointer.
+	; put last task in scheduler queue
+	jl   @schedule_tail
+
+	ld   r9, [sp, PT_status32]
+	brne r9, 0, 1f
+
+	jl.d [r14]		; kernel thread entry point
+	mov  r0, r13		; (see PF_KTHREAD block in copy_thread)
+
+1:
+	; Return to user space
+	; 1. Any forked task (Reach here via BRne above)
+	; 2. First ever init task (Reach here via return from JL above)
+	;    This is the historic "kernel_execve" use-case, to return to init
+	;    user mode, in a round about way since that is always done from
+	;    a kernel thread which is executed via JL above but always returns
+	;    out whenever kernel_execve (now inline do_fork()) is involved
+	b    ret_from_exception
+END(ret_from_fork)
+
+;################### Non TLB Exception Handling #############################
+
+; ---------------------------------------------
+; Instruction Error Exception Handler
+; ---------------------------------------------
+
+ENTRY(instr_service)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN
+
+	bl  do_insterror_or_kprobe
+	b   ret_from_exception
+END(instr_service)
+
+; ---------------------------------------------
+; Machine Check Exception Handler
+; ---------------------------------------------
+
+ENTRY(EV_MachineCheck)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r2, [ecr]
+	lr  r0, [efa]
+	mov r1, sp
+
+	; MC excpetions disable MMU
+	ARC_MMU_REENABLE r3
+
+	lsr  	r3, r2, 8
+	bmsk 	r3, r3, 7
+	brne    r3, ECR_C_MCHK_DUP_TLB, 1f
+
+	bl      do_tlb_overlap_fault
+	b       ret_from_exception
+
+1:
+	; DEAD END: can't do much, display Regs and HALT
+	SAVE_CALLEE_SAVED_USER
+
+	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
+	st  sp, [r10, THREAD_CALLEE_REG]
+
+	j  do_machine_check_fault
+
+END(EV_MachineCheck)
+
+; ---------------------------------------------
+; Privilege Violation Exception Handler
+; ---------------------------------------------
+ENTRY(EV_PrivilegeV)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN
+
+	bl  do_privilege_fault
+	b   ret_from_exception
+END(EV_PrivilegeV)
+
+; ---------------------------------------------
+; Extension Instruction Exception Handler
+; ---------------------------------------------
+ENTRY(EV_Extension)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN
+
+	bl  do_extension_fault
+	b   ret_from_exception
+END(EV_Extension)
+
+;################ Trap Handling (Syscall, Breakpoint) ##################
+
+; ---------------------------------------------
+; syscall Tracing
+; ---------------------------------------------
+tracesys:
+	; save EFA in case tracer wants the PC of traced task
+	; using ERET won't work since next-PC has already committed
+	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
+	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
+
+	; PRE Sys Call Ptrace hook
+	mov r0, sp			; pt_regs needed
+	bl  @syscall_trace_entry
+
+	; Tracing code now returns the syscall num (orig or modif)
+	mov r8, r0
+
+	; Do the Sys Call as we normally would.
+	; Validate the Sys Call number
+	cmp     r8,  NR_syscalls - 1
+	mov.hi  r0, -ENOSYS
+	bhi     tracesys_exit
+
+	; Restore the sys-call args. Mere invocation of the hook abv could have
+	; clobbered them (since they are in scratch regs). The tracer could also
+	; have deliberately changed the syscall args: r0-r7
+	ld  r0, [sp, PT_r0]
+	ld  r1, [sp, PT_r1]
+	ld  r2, [sp, PT_r2]
+	ld  r3, [sp, PT_r3]
+	ld  r4, [sp, PT_r4]
+	ld  r5, [sp, PT_r5]
+	ld  r6, [sp, PT_r6]
+	ld  r7, [sp, PT_r7]
+	ld.as   r9, [sys_call_table, r8]
+	jl      [r9]        ; Entry into Sys Call Handler
+
+tracesys_exit:
+	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
+
+	;POST Sys Call Ptrace Hook
+	mov r0, sp		; pt_regs needed
+	bl  @syscall_trace_exit
+	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
+	; we'd done before calling post hook above
+
+; ---------------------------------------------
+; Breakpoint TRAP
+; ---------------------------------------------
+trap_with_param:
+	mov r0, r12	; EFA in case ptracer/gdb wants stop_pc
+	mov r1, sp
+
+	; Save callee regs in case gdb wants to have a look
+	; SP will grow up by size of CALLEE Reg-File
+	; NOTE: clobbers r12
+	SAVE_CALLEE_SAVED_USER
+
+	; save location of saved Callee Regs @ thread_struct->pc
+	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
+	st  sp, [r10, THREAD_CALLEE_REG]
+
+	; Call the trap handler
+	bl  do_non_swi_trap
+
+	; unwind stack to discard Callee saved Regs
+	DISCARD_CALLEE_SAVED_USER
+
+	b   ret_from_exception
+
+; ---------------------------------------------
+; syscall TRAP
+; ABI: (r0-r7) upto 8 args, (r8) syscall number
+; ---------------------------------------------
+
+ENTRY(EV_Trap)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r12, [efa]
+
+	FAKE_RET_FROM_EXCPN
+
+	;============ TRAP 1   :breakpoints
+	; Check ECR for trap with arg (PROLOGUE ensures r10 has ECR)
+	bmsk.f 0, r10, 7
+	bnz    trap_with_param
+
+	;============ TRAP  (no param): syscall top level
+
+	; If syscall tracing ongoing, invoke pre-post-hooks
+	GET_CURR_THR_INFO_FLAGS   r10
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys  ; this never comes back
+
+	;============ Normal syscall case
+
+	; syscall num shd not exceed the total system calls avail
+	cmp     r8,  NR_syscalls - 1
+	mov.hi  r0, -ENOSYS
+	bhi     .Lret_from_system_call
+
+	; Offset into the syscall_table and call handler
+	ld.as   r9,[sys_call_table, r8]
+	jl      [r9]        ; Entry into Sys Call Handler
+
+.Lret_from_system_call:
+
+	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
+
+	; fall through to ret_from_exception
+END(EV_Trap)
+
+;############# Return from Intr/Excp/Trap (Linux Specifics) ##############
+;
+; If ret to user mode do we need to handle signals, schedule() et al.
+
+ENTRY(ret_from_exception)
+
+	; Pre-{IRQ,Trap,Exception} K/U mode from pt_regs->status32
+	ld  r8, [sp, PT_status32]   ; returning to User/Kernel Mode
+
+	bbit0  r8, STATUS_U_BIT, resume_kernel_mode
+
+	; Before returning to User mode check-for-and-complete any pending work
+	; such as rescheduling/signal-delivery etc.
+resume_user_mode_begin:
+
+	; Disable IRQs to ensures that chk for pending work itself is atomic
+	; (and we don't end up missing a NEED_RESCHED/SIGPENDING due to an
+	; interim IRQ).
+	IRQ_DISABLE	r10
+
+	; Fast Path return to user mode if no pending work
+	GET_CURR_THR_INFO_FLAGS   r9
+	and.f  0,  r9, _TIF_WORK_MASK
+	bz     .Lrestore_regs
+
+	; --- (Slow Path #1) task preemption ---
+	bbit0  r9, TIF_NEED_RESCHED, .Lchk_pend_signals
+	mov    blink, resume_user_mode_begin  ; tail-call to U mode ret chks
+	j      @schedule 	; BTST+Bnz causes relo error in link
+
+.Lchk_pend_signals:
+	IRQ_ENABLE	r10
+
+	; --- (Slow Path #2) pending signal  ---
+	mov r0, sp	; pt_regs for arg to do_signal()/do_notify_resume()
+
+	GET_CURR_THR_INFO_FLAGS   r9
+	and.f  0,  r9, _TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL
+	bz .Lchk_notify_resume
+
+	; Normal Trap/IRQ entry only saves Scratch (caller-saved) regs
+	; in pt_reg since the "C" ABI (kernel code) will automatically
+	; save/restore callee-saved regs.
+	;
+	; However, here we need to explicitly save callee regs because
+	; (i)  If this signal causes coredump - full regfile needed
+	; (ii) If signal is SIGTRAP/SIGSTOP, task is being traced thus
+	;      tracer might call PEEKUSR(CALLEE reg)
+	;
+	; NOTE: SP will grow up by size of CALLEE Reg-File
+	SAVE_CALLEE_SAVED_USER		; clobbers r12
+
+	; save location of saved Callee Regs @ thread_struct->callee
+	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
+	st  sp, [r10, THREAD_CALLEE_REG]
+
+	bl  @do_signal
+
+	; Ideally we want to discard the Callee reg above, however if this was
+	; a tracing signal, tracer could have done a POKEUSR(CALLEE reg)
+	RESTORE_CALLEE_SAVED_USER
+
+	b      resume_user_mode_begin	; loop back to start of U mode ret
+
+	; --- (Slow Path #3) notify_resume ---
+.Lchk_notify_resume:
+	btst   r9, TIF_NOTIFY_RESUME
+	blnz   @do_notify_resume
+	b      resume_user_mode_begin	; unconditionally back to U mode ret chks
+					; for single exit point from this block
+
+resume_kernel_mode:
+
+	; Disable Interrupts from this point on
+	; CONFIG_PREEMPTION: This is a must for preempt_schedule_irq()
+	; !CONFIG_PREEMPTION: To ensure restore_regs is intr safe
+	IRQ_DISABLE	r9
+
+#ifdef CONFIG_PREEMPTION
+
+	; Can't preempt if preemption disabled
+	GET_CURR_THR_INFO_FROM_SP   r10
+	ld  r8, [r10, THREAD_INFO_PREEMPT_COUNT]
+	brne  r8, 0, .Lrestore_regs
+
+	; check if this task's NEED_RESCHED flag set
+	ld  r9, [r10, THREAD_INFO_FLAGS]
+	bbit0  r9, TIF_NEED_RESCHED, .Lrestore_regs
+
+	; Invoke PREEMPTION
+	jl      preempt_schedule_irq
+
+	; preempt_schedule_irq() always returns with IRQ disabled
+#endif
+
+	b	.Lrestore_regs
+
+##### DONT ADD CODE HERE - .Lrestore_regs actually follows in entry-<isa>.S
+
diff --git a/arch/arc/kernel/fpu.c b/arch/arc/kernel/fpu.c
new file mode 100644
index 000000000..ec640219d
--- /dev/null
+++ b/arch/arc/kernel/fpu.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * fpu.c - save/restore of Floating Point Unit Registers on task switch
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/sched.h>
+#include <asm/fpu.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+
+/*
+ * To save/restore FPU regs, simplest scheme would use LR/SR insns.
+ * However since SR serializes the pipeline, an alternate "hack" can be used
+ * which uses the FPU Exchange insn (DEXCL) to r/w FPU regs.
+ *
+ * Store to 64bit dpfp1 reg from a pair of core regs:
+ *   dexcl1 0, r1, r0  ; where r1:r0 is the 64 bit val
+ *
+ * Read from dpfp1 into pair of core regs (w/o clobbering dpfp1)
+ *   mov_s    r3, 0
+ *   daddh11  r1, r3, r3   ; get "hi" into r1 (dpfp1 unchanged)
+ *   dexcl1   r0, r1, r3   ; get "low" into r0 (dpfp1 low clobbered)
+ *   dexcl1    0, r1, r0   ; restore dpfp1 to orig value
+ *
+ * However we can tweak the read, so that read-out of outgoing task's FPU regs
+ * and write of incoming task's regs happen in one shot. So all the work is
+ * done before context switch
+ */
+
+void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
+{
+	unsigned int *saveto = &prev->thread.fpu.aux_dpfp[0].l;
+	unsigned int *readfrom = &next->thread.fpu.aux_dpfp[0].l;
+
+	const unsigned int zero = 0;
+
+	__asm__ __volatile__(
+		"daddh11  %0, %2, %2\n"
+		"dexcl1   %1, %3, %4\n"
+		: "=&r" (*(saveto + 1)), /* early clobber must here */
+		  "=&r" (*(saveto))
+		: "r" (zero), "r" (*(readfrom + 1)), "r" (*(readfrom))
+	);
+
+	__asm__ __volatile__(
+		"daddh22  %0, %2, %2\n"
+		"dexcl2   %1, %3, %4\n"
+		: "=&r"(*(saveto + 3)),	/* early clobber must here */
+		  "=&r"(*(saveto + 2))
+		: "r" (zero), "r" (*(readfrom + 3)), "r" (*(readfrom + 2))
+	);
+}
+
+#else
+
+void fpu_init_task(struct pt_regs *regs)
+{
+	const unsigned int fwe = 0x80000000;
+
+	/* default rounding mode */
+	write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
+
+	/* Initialize to zero: setting requires FWE be set */
+	write_aux_reg(ARC_REG_FPU_STATUS, fwe);
+}
+
+void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
+{
+	struct arc_fpu *save = &prev->thread.fpu;
+	struct arc_fpu *restore = &next->thread.fpu;
+	const unsigned int fwe = 0x80000000;
+
+	save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
+	save->status = read_aux_reg(ARC_REG_FPU_STATUS);
+
+	write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
+	write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status));
+}
+
+#endif
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
new file mode 100644
index 000000000..915278244
--- /dev/null
+++ b/arch/arc/kernel/head.S
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ARC CPU startup Code
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Vineetg: Dec 2007
+ *  -Check if we are running on Simulator or on real hardware
+ *      to skip certain things during boot on simulator
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+#include <asm/arcregs.h>
+#include <asm/cache.h>
+#include <asm/dsp-impl.h>
+#include <asm/irqflags.h>
+
+.macro CPU_EARLY_SETUP
+
+	; Setting up Vectror Table (in case exception happens in early boot
+	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
+
+	; Disable I-cache/D-cache if kernel so configured
+	lr	r5, [ARC_REG_IC_BCR]
+	breq    r5, 0, 1f		; I$ doesn't exist
+	lr	r5, [ARC_REG_IC_CTRL]
+#ifdef CONFIG_ARC_HAS_ICACHE
+	bclr	r5, r5, 0		; 0 - Enable, 1 is Disable
+#else
+	bset	r5, r5, 0		; I$ exists, but is not used
+#endif
+	sr	r5, [ARC_REG_IC_CTRL]
+
+1:
+	lr	r5, [ARC_REG_DC_BCR]
+	breq    r5, 0, 1f		; D$ doesn't exist
+	lr	r5, [ARC_REG_DC_CTRL]
+	bclr	r5, r5, 6		; Invalidate (discard w/o wback)
+#ifdef CONFIG_ARC_HAS_DCACHE
+	bclr	r5, r5, 0		; Enable (+Inv)
+#else
+	bset	r5, r5, 0		; Disable (+Inv)
+#endif
+	sr	r5, [ARC_REG_DC_CTRL]
+
+1:
+
+#ifdef CONFIG_ISA_ARCV2
+	; Unaligned access is disabled at reset, so re-enable early as
+	; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access
+	; by default
+	lr	r5, [status32]
+#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
+	bset	r5, r5, STATUS_AD_BIT
+#else
+	; Although disabled at reset, bootloader might have enabled it
+	bclr	r5, r5, STATUS_AD_BIT
+#endif
+	kflag	r5
+
+#ifdef CONFIG_ARC_LPB_DISABLE
+	lr	r5, [ARC_REG_LPB_BUILD]
+	breq    r5, 0, 1f		; LPB doesn't exist
+	mov	r5, 1
+	sr	r5, [ARC_REG_LPB_CTRL]
+1:
+#endif /* CONFIG_ARC_LPB_DISABLE */
+
+	/* On HSDK, CCMs need to remapped super early */
+#ifdef CONFIG_ARC_SOC_HSDK
+	mov	r6, 0x60000000
+	lr	r5, [ARC_REG_ICCM_BUILD]
+	breq	r5, 0, 1f
+	sr	r6, [ARC_REG_AUX_ICCM]
+1:
+	lr	r5, [ARC_REG_DCCM_BUILD]
+	breq	r5, 0, 2f
+	sr	r6, [ARC_REG_AUX_DCCM]
+2:
+#endif	/* CONFIG_ARC_SOC_HSDK */
+
+#endif	/* CONFIG_ISA_ARCV2 */
+
+	; Config DSP_CTRL properly, so kernel may use integer multiply,
+	; multiply-accumulate, and divide operations
+	DSP_EARLY_INIT
+.endm
+
+	.section .init.text, "ax",@progbits
+
+;----------------------------------------------------------------
+; Default Reset Handler (jumped into from Reset vector)
+; - Don't clobber r0,r1,r2 as they might have u-boot provided args
+; - Platforms can override this weak version if needed
+;----------------------------------------------------------------
+WEAK(res_service)
+	j	stext
+END(res_service)
+
+;----------------------------------------------------------------
+; Kernel Entry point
+;----------------------------------------------------------------
+ENTRY(stext)
+
+	CPU_EARLY_SETUP
+
+#ifdef CONFIG_SMP
+	GET_CPU_ID  r5
+	cmp	r5, 0
+	mov.nz	r0, r5
+	bz	.Lmaster_proceed
+
+	; Non-Masters wait for Master to boot enough and bring them up
+	; when they resume, tail-call to entry point
+	mov	blink, @first_lines_of_secondary
+	j	arc_platform_smp_wait_to_boot
+
+.Lmaster_proceed:
+#endif
+
+	; Clear BSS before updating any globals
+	; XXX: use ZOL here
+	mov	r5, __bss_start
+	sub	r6, __bss_stop, r5
+	lsr.f	lp_count, r6, 2
+	lpnz	1f
+	st.ab   0, [r5, 4]
+1:
+
+	; Uboot - kernel ABI
+	;    r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2
+	;    r1 = magic number (always zero as of now)
+	;    r2 = pointer to uboot provided cmdline or external DTB in mem
+	; These are handled later in handle_uboot_args()
+	st	r0, [@uboot_tag]
+	st      r1, [@uboot_magic]
+	st	r2, [@uboot_arg]
+
+	; setup "current" tsk and optionally cache it in dedicated r25
+	mov	r9, @init_task
+	SET_CURR_TASK_ON_CPU  r9, r0	; r9 = tsk, r0 = scratch
+
+	; setup stack (fp, sp)
+	mov	fp, 0
+
+	; tsk->thread_info is really a PAGE, whose bottom hoists stack
+	GET_TSK_STACK_BASE r9, sp	; r9 = tsk, sp = stack base(output)
+
+	j	start_kernel	; "C" entry point
+END(stext)
+
+#ifdef CONFIG_SMP
+;----------------------------------------------------------------
+;     First lines of code run by secondary before jumping to 'C'
+;----------------------------------------------------------------
+	.section .text, "ax",@progbits
+ENTRY(first_lines_of_secondary)
+
+	; setup per-cpu idle task as "current" on this CPU
+	ld	r0, [@secondary_idle_tsk]
+	SET_CURR_TASK_ON_CPU  r0, r1
+
+	; setup stack (fp, sp)
+	mov	fp, 0
+
+	; set it's stack base to tsk->thread_info bottom
+	GET_TSK_STACK_BASE r0, sp
+
+	j	start_kernel_secondary
+END(first_lines_of_secondary)
+#endif
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
new file mode 100644
index 000000000..5cda19d0a
--- /dev/null
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <asm/irq.h>
+
+#define NR_EXCEPTIONS	16
+
+struct bcr_irq_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
+#else
+	unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
+#endif
+};
+
+/*
+ * Early Hardware specific Interrupt setup
+ * -Called very early (start_kernel -> setup_arch -> setup_processor)
+ * -Platform Independent (must for any ARC Core)
+ * -Needed for each CPU (hence not foldable into init_IRQ)
+ */
+void arc_init_IRQ(void)
+{
+	unsigned int tmp, irq_prio, i;
+	struct bcr_irq_arcv2 irq_bcr;
+
+	struct aux_irq_ctrl {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int res3:18, save_idx_regs:1, res2:1,
+			     save_u_to_u:1, save_lp_regs:1, save_blink:1,
+			     res:4, save_nr_gpr_pairs:5;
+#else
+		unsigned int save_nr_gpr_pairs:5, res:4,
+			     save_blink:1, save_lp_regs:1, save_u_to_u:1,
+			     res2:1, save_idx_regs:1, res3:18;
+#endif
+	} ictrl;
+
+	*(unsigned int *)&ictrl = 0;
+
+#ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE
+	ictrl.save_nr_gpr_pairs = 6;	/* r0 to r11 (r12 saved manually) */
+	ictrl.save_blink = 1;
+	ictrl.save_lp_regs = 1;		/* LP_COUNT, LP_START, LP_END */
+	ictrl.save_u_to_u = 0;		/* user ctxt saved on kernel stack */
+	ictrl.save_idx_regs = 1;	/* JLI, LDI, EI */
+#endif
+
+	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
+
+	/*
+	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
+	 * Typical builds though have only two levels (0-high, 1-low)
+	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
+	 * NMI style interrupts in future (say perf)
+	 */
+
+	READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
+
+	irq_prio = irq_bcr.prio;	/* Encoded as N-1 for N levels */
+	pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
+		irq_prio + 1, ARCV2_IRQ_DEF_PRIO,
+		irq_bcr.firq ? " FIRQ (not used)":"");
+
+	/*
+	 * Set a default priority for all available interrupts to prevent
+	 * switching of register banks if Fast IRQ and multiple register banks
+	 * are supported by CPU.
+	 * Also disable private-per-core IRQ lines so faulty external HW won't
+	 * trigger interrupt that kernel is not ready to handle.
+	 */
+	for (i = NR_EXCEPTIONS; i < irq_bcr.irqs + NR_EXCEPTIONS; i++) {
+		write_aux_reg(AUX_IRQ_SELECT, i);
+		write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
+
+		/*
+		 * Only mask cpu private IRQs here.
+		 * "common" interrupts are masked at IDU, otherwise it would
+		 * need to be unmasked at each cpu, with IPIs
+		 */
+		if (i < FIRST_EXT_IRQ)
+			write_aux_reg(AUX_IRQ_ENABLE, 0);
+	}
+
+	/* setup status32, don't enable intr yet as kernel doesn't want */
+	tmp = read_aux_reg(ARC_REG_STATUS32);
+	tmp |= ARCV2_IRQ_DEF_PRIO << 1;
+	tmp &= ~STATUS_IE_MASK;
+	asm volatile("kflag %0	\n"::"r"(tmp));
+}
+
+static void arcv2_irq_mask(struct irq_data *data)
+{
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
+	write_aux_reg(AUX_IRQ_ENABLE, 0);
+}
+
+static void arcv2_irq_unmask(struct irq_data *data)
+{
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
+	write_aux_reg(AUX_IRQ_ENABLE, 1);
+}
+
+void arcv2_irq_enable(struct irq_data *data)
+{
+	/* set default priority */
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
+	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
+
+	/*
+	 * hw auto enables (linux unmask) all by default
+	 * So no need to do IRQ_ENABLE here
+	 * XXX: However OSCI LAN need it
+	 */
+	write_aux_reg(AUX_IRQ_ENABLE, 1);
+}
+
+static struct irq_chip arcv2_irq_chip = {
+	.name           = "ARCv2 core Intc",
+	.irq_mask	= arcv2_irq_mask,
+	.irq_unmask	= arcv2_irq_unmask,
+	.irq_enable	= arcv2_irq_enable
+};
+
+static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
+			 irq_hw_number_t hw)
+{
+	/*
+	 * core intc IRQs [16, 23]:
+	 * Statically assigned always private-per-core (Timers, WDT, IPI, PCT)
+	 */
+	if (hw < FIRST_EXT_IRQ) {
+		/*
+		 * A subsequent request_percpu_irq() fails if percpu_devid is
+		 * not set. That in turns sets NOAUTOEN, meaning each core needs
+		 * to call enable_percpu_irq()
+		 */
+		irq_set_percpu_devid(irq);
+		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
+	} else {
+		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops arcv2_irq_ops = {
+	.xlate = irq_domain_xlate_onecell,
+	.map = arcv2_irq_map,
+};
+
+
+static int __init
+init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
+{
+	struct irq_domain *root_domain;
+	struct bcr_irq_arcv2 irq_bcr;
+	unsigned int nr_cpu_irqs;
+
+	READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
+	nr_cpu_irqs = irq_bcr.irqs + NR_EXCEPTIONS;
+
+	if (parent)
+		panic("DeviceTree incore intc not a root irq controller\n");
+
+	root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
+	if (!root_domain)
+		panic("root irq domain not avail\n");
+
+	/*
+	 * Needed for primary domain lookup to succeed
+	 * This is a primary irqchip, and can never have a parent
+	 */
+	irq_set_default_host(root_domain);
+
+#ifdef CONFIG_SMP
+	irq_create_mapping(root_domain, IPI_IRQ);
+#endif
+	irq_create_mapping(root_domain, SOFTIRQ_IRQ);
+
+	return 0;
+}
+
+IRQCHIP_DECLARE(arc_intc, "snps,archs-intc", init_onchip_IRQ);
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
new file mode 100644
index 000000000..6885e4228
--- /dev/null
+++ b/arch/arc/kernel/intc-compact.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip.h>
+#include <asm/irq.h>
+
+#define NR_CPU_IRQS	32	/* number of irq lines coming in */
+#define TIMER0_IRQ	3	/* Fixed by ISA */
+
+/*
+ * Early Hardware specific Interrupt setup
+ * -Platform independent, needed for each CPU (not foldable into init_IRQ)
+ * -Called very early (start_kernel -> setup_arch -> setup_processor)
+ *
+ * what it does ?
+ * -Optionally, setup the High priority Interrupts as Level 2 IRQs
+ */
+void arc_init_IRQ(void)
+{
+	unsigned int level_mask = 0, i;
+
+       /* Is timer high priority Interrupt (Level2 in ARCompact jargon) */
+	level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ;
+
+	/*
+	 * Write to register, even if no LV2 IRQs configured to reset it
+	 * in case bootloader had mucked with it
+	 */
+	write_aux_reg(AUX_IRQ_LEV, level_mask);
+
+	if (level_mask)
+		pr_info("Level-2 interrupts bitset %x\n", level_mask);
+
+	/*
+	 * Disable all IRQ lines so faulty external hardware won't
+	 * trigger interrupt that kernel is not ready to handle.
+	 */
+	for (i = TIMER0_IRQ; i < NR_CPU_IRQS; i++) {
+		unsigned int ienb;
+
+		ienb = read_aux_reg(AUX_IENABLE);
+		ienb &= ~(1 << i);
+		write_aux_reg(AUX_IENABLE, ienb);
+	}
+}
+
+/*
+ * ARC700 core includes a simple on-chip intc supporting
+ * -per IRQ enable/disable
+ * -2 levels of interrupts (high/low)
+ * -all interrupts being level triggered
+ *
+ * To reduce platform code, we assume all IRQs directly hooked-up into intc.
+ * Platforms with external intc, hence cascaded IRQs, are free to over-ride
+ * below, per IRQ.
+ */
+
+static void arc_irq_mask(struct irq_data *data)
+{
+	unsigned int ienb;
+
+	ienb = read_aux_reg(AUX_IENABLE);
+	ienb &= ~(1 << data->hwirq);
+	write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static void arc_irq_unmask(struct irq_data *data)
+{
+	unsigned int ienb;
+
+	ienb = read_aux_reg(AUX_IENABLE);
+	ienb |= (1 << data->hwirq);
+	write_aux_reg(AUX_IENABLE, ienb);
+}
+
+static struct irq_chip onchip_intc = {
+	.name           = "ARC In-core Intc",
+	.irq_mask	= arc_irq_mask,
+	.irq_unmask	= arc_irq_unmask,
+};
+
+static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
+			       irq_hw_number_t hw)
+{
+	switch (hw) {
+	case TIMER0_IRQ:
+		irq_set_percpu_devid(irq);
+		irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
+		break;
+	default:
+		irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq);
+	}
+	return 0;
+}
+
+static const struct irq_domain_ops arc_intc_domain_ops = {
+	.xlate = irq_domain_xlate_onecell,
+	.map = arc_intc_domain_map,
+};
+
+static int __init
+init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
+{
+	struct irq_domain *root_domain;
+
+	if (parent)
+		panic("DeviceTree incore intc not a root irq controller\n");
+
+	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
+					    &arc_intc_domain_ops, NULL);
+	if (!root_domain)
+		panic("root irq domain not avail\n");
+
+	/*
+	 * Needed for primary domain lookup to succeed
+	 * This is a primary irqchip, and can never have a parent
+	 */
+	irq_set_default_host(root_domain);
+
+	return 0;
+}
+
+IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
+
+/*
+ * arch_local_irq_enable - Enable interrupts.
+ *
+ * 1. Explicitly called to re-enable interrupts
+ * 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc
+ *    which maybe in hard ISR itself
+ *
+ * Semantics of this function change depending on where it is called from:
+ *
+ * -If called from hard-ISR, it must not invert interrupt priorities
+ *  e.g. suppose TIMER is high priority (Level 2) IRQ
+ *    Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.
+ *    Here local_irq_enable( ) shd not re-enable lower priority interrupts
+ * -If called from soft-ISR, it must re-enable all interrupts
+ *    soft ISR are low priority jobs which can be very slow, thus all IRQs
+ *    must be enabled while they run.
+ *    Now hardware context wise we may still be in L2 ISR (not done rtie)
+ *    still we must re-enable both L1 and L2 IRQs
+ *  Another twist is prev scenario with flow being
+ *     L1 ISR ==> interrupted by L2 ISR  ==> L2 soft ISR
+ *     here we must not re-enable Ll as prev Ll Interrupt's h/w context will get
+ *     over-written (this is deficiency in ARC700 Interrupt mechanism)
+ */
+
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS	/* Complex version for 2 IRQ levels */
+
+void arch_local_irq_enable(void)
+{
+	unsigned long flags = arch_local_save_flags();
+
+	if (flags & STATUS_A2_MASK)
+		flags |= STATUS_E2_MASK;
+	else if (flags & STATUS_A1_MASK)
+		flags |= STATUS_E1_MASK;
+
+	arch_local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(arch_local_irq_enable);
+#endif
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
new file mode 100644
index 000000000..dd09b58ff
--- /dev/null
+++ b/arch/arc/kernel/irq.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <asm/mach_desc.h>
+
+#include <asm/irq_regs.h>
+#include <asm/smp.h>
+
+/*
+ * Late Interrupt system init called from start_kernel for Boot CPU only
+ *
+ * Since slab must already be initialized, platforms can start doing any
+ * needed request_irq( )s
+ */
+void __init init_IRQ(void)
+{
+	/*
+	 * process the entire interrupt tree in one go
+	 * Any external intc will be setup provided DT chains them
+	 * properly
+	 */
+	irqchip_init();
+
+#ifdef CONFIG_SMP
+	/* a SMP H/w block could do IPI IRQ request here */
+	if (plat_smp_ops.init_per_cpu)
+		plat_smp_ops.init_per_cpu(smp_processor_id());
+#endif
+
+	if (machine_desc->init_per_cpu)
+		machine_desc->init_per_cpu(smp_processor_id());
+}
+
+/*
+ * "C" Entry point for any ARC ISR, called from low level vector handler
+ * @irq is the vector number read from ICAUSE reg of on-chip intc
+ */
+void arch_do_IRQ(unsigned int hwirq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+
+	irq_enter();
+	old_regs = set_irq_regs(regs);
+	generic_handle_domain_irq(NULL, hwirq);
+	set_irq_regs(old_regs);
+	irq_exit();
+}
diff --git a/arch/arc/kernel/jump_label.c b/arch/arc/kernel/jump_label.c
new file mode 100644
index 000000000..70b74a5d0
--- /dev/null
+++ b/arch/arc/kernel/jump_label.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kernel.h>
+#include <linux/jump_label.h>
+
+#include "asm/cacheflush.h"
+
+#define JUMPLABEL_ERR	"ARC: jump_label: ERROR: "
+
+/* Halt system on fatal error to make debug easier */
+#define arc_jl_fatal(format...)						\
+({									\
+	pr_err(JUMPLABEL_ERR format);					\
+	BUG();								\
+})
+
+static inline u32 arc_gen_nop(void)
+{
+	/* 1x 32bit NOP in middle endian */
+	return 0x7000264a;
+}
+
+/*
+ * Atomic update of patched instruction is only available if this
+ * instruction doesn't cross L1 cache line boundary. You can read about
+ * the way we achieve this in arc/include/asm/jump_label.h
+ */
+static inline void instruction_align_assert(void *addr, int len)
+{
+	unsigned long a = (unsigned long)addr;
+
+	if ((a >> L1_CACHE_SHIFT) != ((a + len - 1) >> L1_CACHE_SHIFT))
+		arc_jl_fatal("instruction (addr %px) cross L1 cache line border",
+			     addr);
+}
+
+/*
+ * ARCv2 'Branch unconditionally' instruction:
+ * 00000ssssssssss1SSSSSSSSSSNRtttt
+ * s S[n:0] lower bits signed immediate (number is bitfield size)
+ * S S[m:n+1] upper bits signed immediate (number is bitfield size)
+ * t S[24:21] upper bits signed immediate (branch unconditionally far)
+ * N N <.d> delay slot mode
+ * R R Reserved
+ */
+static inline u32 arc_gen_branch(jump_label_t pc, jump_label_t target)
+{
+	u32 instruction_l, instruction_r;
+	u32 pcl = pc & GENMASK(31, 2);
+	u32 u_offset = target - pcl;
+	u32 s, S, t;
+
+	/*
+	 * Offset in 32-bit branch instruction must to fit into s25.
+	 * Something is terribly broken if we get such huge offset within one
+	 * function.
+	 */
+	if ((s32)u_offset < -16777216 || (s32)u_offset > 16777214)
+		arc_jl_fatal("gen branch with offset (%d) not fit in s25",
+			     (s32)u_offset);
+
+	/*
+	 * All instructions are aligned by 2 bytes so we should never get offset
+	 * here which is not 2 bytes aligned.
+	 */
+	if (u_offset & 0x1)
+		arc_jl_fatal("gen branch with offset (%d) unaligned to 2 bytes",
+			     (s32)u_offset);
+
+	s = (u_offset >> 1)  & GENMASK(9, 0);
+	S = (u_offset >> 11) & GENMASK(9, 0);
+	t = (u_offset >> 21) & GENMASK(3, 0);
+
+	/* 00000ssssssssss1 */
+	instruction_l = (s << 1) | 0x1;
+	/* SSSSSSSSSSNRtttt */
+	instruction_r = (S << 6) | t;
+
+	return (instruction_r << 16) | (instruction_l & GENMASK(15, 0));
+}
+
+void arch_jump_label_transform(struct jump_entry *entry,
+			       enum jump_label_type type)
+{
+	jump_label_t *instr_addr = (jump_label_t *)entry->code;
+	u32 instr;
+
+	instruction_align_assert(instr_addr, JUMP_LABEL_NOP_SIZE);
+
+	if (type == JUMP_LABEL_JMP)
+		instr = arc_gen_branch(entry->code, entry->target);
+	else
+		instr = arc_gen_nop();
+
+	WRITE_ONCE(*instr_addr, instr);
+	flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE);
+}
+
+#ifdef CONFIG_ARC_DBG_JUMP_LABEL
+#define SELFTEST_MSG	"ARC: instruction generation self-test: "
+
+struct arc_gen_branch_testdata {
+	jump_label_t pc;
+	jump_label_t target_address;
+	u32 expected_instr;
+};
+
+static __init int branch_gen_test(const struct arc_gen_branch_testdata *test)
+{
+	u32 instr_got;
+
+	instr_got = arc_gen_branch(test->pc, test->target_address);
+	if (instr_got == test->expected_instr)
+		return 0;
+
+	pr_err(SELFTEST_MSG "FAIL:\n arc_gen_branch(0x%08x, 0x%08x) != 0x%08x, got 0x%08x\n",
+	       test->pc, test->target_address,
+	       test->expected_instr, instr_got);
+
+	return -EFAULT;
+}
+
+/*
+ * Offset field in branch instruction is not continuous. Test all
+ * available offset field and sign combinations. Test data is generated
+ * from real working code.
+ */
+static const struct arc_gen_branch_testdata arcgenbr_test_data[] __initconst = {
+	{0x90007548, 0x90007514, 0xffcf07cd}, /* tiny (-52) offs */
+	{0x9000c9c0, 0x9000c782, 0xffcf05c3}, /* tiny (-574) offs */
+	{0x9000cc1c, 0x9000c782, 0xffcf0367}, /* tiny (-1178) offs */
+	{0x9009dce0, 0x9009d106, 0xff8f0427}, /* small (-3034) offs */
+	{0x9000f5de, 0x90007d30, 0xfc0f0755}, /* big  (-30892) offs */
+	{0x900a2444, 0x90035f64, 0xc9cf0321}, /* huge (-443616) offs */
+	{0x90007514, 0x9000752c, 0x00000019}, /* tiny (+24) offs */
+	{0x9001a578, 0x9001a77a, 0x00000203}, /* tiny (+514) offs */
+	{0x90031ed8, 0x90032634, 0x0000075d}, /* tiny (+1884) offs */
+	{0x9008c7f2, 0x9008d3f0, 0x00400401}, /* small (+3072) offs */
+	{0x9000bb38, 0x9003b340, 0x17c00009}, /* big  (+194568) offs */
+	{0x90008f44, 0x90578d80, 0xb7c2063d}  /* huge (+5701180) offs */
+};
+
+static __init int instr_gen_test(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(arcgenbr_test_data); i++)
+		if (branch_gen_test(&arcgenbr_test_data[i]))
+			return -EFAULT;
+
+	pr_info(SELFTEST_MSG "OK\n");
+
+	return 0;
+}
+early_initcall(instr_gen_test);
+
+#endif /* CONFIG_ARC_DBG_JUMP_LABEL */
diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c
new file mode 100644
index 000000000..345a00005
--- /dev/null
+++ b/arch/arc/kernel/kgdb.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * kgdb support for ARC
+ *
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/kgdb.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <asm/disasm.h>
+#include <asm/cacheflush.h>
+
+static void to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs,
+			struct callee_regs *cregs)
+{
+	int regno;
+
+	for (regno = 0; regno <= 26; regno++)
+		gdb_regs[_R0 + regno] = get_reg(regno, kernel_regs, cregs);
+
+	for (regno = 27; regno < GDB_MAX_REGS; regno++)
+		gdb_regs[regno] = 0;
+
+	gdb_regs[_FP]		= kernel_regs->fp;
+	gdb_regs[__SP]		= kernel_regs->sp;
+	gdb_regs[_BLINK]	= kernel_regs->blink;
+	gdb_regs[_RET]		= kernel_regs->ret;
+	gdb_regs[_STATUS32]	= kernel_regs->status32;
+	gdb_regs[_LP_COUNT]	= kernel_regs->lp_count;
+	gdb_regs[_LP_END]	= kernel_regs->lp_end;
+	gdb_regs[_LP_START]	= kernel_regs->lp_start;
+	gdb_regs[_BTA]		= kernel_regs->bta;
+	gdb_regs[_STOP_PC]	= kernel_regs->ret;
+}
+
+static void from_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs,
+			struct callee_regs *cregs)
+{
+	int regno;
+
+	for (regno = 0; regno <= 26; regno++)
+		set_reg(regno, gdb_regs[regno + _R0], kernel_regs, cregs);
+
+	kernel_regs->fp		= gdb_regs[_FP];
+	kernel_regs->sp		= gdb_regs[__SP];
+	kernel_regs->blink	= gdb_regs[_BLINK];
+	kernel_regs->ret	= gdb_regs[_RET];
+	kernel_regs->status32	= gdb_regs[_STATUS32];
+	kernel_regs->lp_count	= gdb_regs[_LP_COUNT];
+	kernel_regs->lp_end	= gdb_regs[_LP_END];
+	kernel_regs->lp_start	= gdb_regs[_LP_START];
+	kernel_regs->bta	= gdb_regs[_BTA];
+}
+
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	to_gdb_regs(gdb_regs, kernel_regs, (struct callee_regs *)
+		current->thread.callee_reg);
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	from_gdb_regs(gdb_regs, kernel_regs, (struct callee_regs *)
+		current->thread.callee_reg);
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs,
+				 struct task_struct *task)
+{
+	if (task)
+		to_gdb_regs(gdb_regs, task_pt_regs(task),
+			(struct callee_regs *) task->thread.callee_reg);
+}
+
+struct single_step_data_t {
+	uint16_t opcode[2];
+	unsigned long address[2];
+	int is_branch;
+	int armed;
+} single_step_data;
+
+static void undo_single_step(struct pt_regs *regs)
+{
+	if (single_step_data.armed) {
+		int i;
+
+		for (i = 0; i < (single_step_data.is_branch ? 2 : 1); i++) {
+			memcpy((void *) single_step_data.address[i],
+				&single_step_data.opcode[i],
+				BREAK_INSTR_SIZE);
+
+			flush_icache_range(single_step_data.address[i],
+				single_step_data.address[i] +
+				BREAK_INSTR_SIZE);
+		}
+		single_step_data.armed = 0;
+	}
+}
+
+static void place_trap(unsigned long address, void *save)
+{
+	memcpy(save, (void *) address, BREAK_INSTR_SIZE);
+	memcpy((void *) address, &arch_kgdb_ops.gdb_bpt_instr,
+		BREAK_INSTR_SIZE);
+	flush_icache_range(address, address + BREAK_INSTR_SIZE);
+}
+
+static void do_single_step(struct pt_regs *regs)
+{
+	single_step_data.is_branch = disasm_next_pc((unsigned long)
+		regs->ret, regs, (struct callee_regs *)
+		current->thread.callee_reg,
+		&single_step_data.address[0],
+		&single_step_data.address[1]);
+
+	place_trap(single_step_data.address[0], &single_step_data.opcode[0]);
+
+	if (single_step_data.is_branch) {
+		place_trap(single_step_data.address[1],
+			&single_step_data.opcode[1]);
+	}
+
+	single_step_data.armed++;
+}
+
+int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
+			       char *remcomInBuffer, char *remcomOutBuffer,
+			       struct pt_regs *regs)
+{
+	unsigned long addr;
+	char *ptr;
+
+	undo_single_step(regs);
+
+	switch (remcomInBuffer[0]) {
+	case 's':
+	case 'c':
+		ptr = &remcomInBuffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			regs->ret = addr;
+		fallthrough;
+
+	case 'D':
+	case 'k':
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+
+		if (remcomInBuffer[0] == 's') {
+			do_single_step(regs);
+			atomic_set(&kgdb_cpu_doing_single_step,
+				   smp_processor_id());
+		}
+
+		return 0;
+	}
+	return -1;
+}
+
+int kgdb_arch_init(void)
+{
+	single_step_data.armed = 0;
+	return 0;
+}
+
+void kgdb_trap(struct pt_regs *regs)
+{
+	/* trap_s 3 is used for breakpoints that overwrite existing
+	 * instructions, while trap_s 4 is used for compiled breakpoints.
+	 *
+	 * with trap_s 3 breakpoints the original instruction needs to be
+	 * restored and continuation needs to start at the location of the
+	 * breakpoint.
+	 *
+	 * with trap_s 4 (compiled) breakpoints, continuation needs to
+	 * start after the breakpoint.
+	 */
+	if (regs->ecr_param == 3)
+		instruction_pointer(regs) -= BREAK_INSTR_SIZE;
+
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+}
+
+void kgdb_arch_exit(void)
+{
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	instruction_pointer(regs) = ip;
+}
+
+void kgdb_call_nmi_hook(void *ignored)
+{
+	/* Default implementation passes get_irq_regs() but we don't */
+	kgdb_nmicallback(raw_smp_processor_id(), NULL);
+}
+
+const struct kgdb_arch arch_kgdb_ops = {
+	/* breakpoint instruction: TRAP_S 0x3 */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	.gdb_bpt_instr		= {0x78, 0x7e},
+#else
+	.gdb_bpt_instr		= {0x7e, 0x78},
+#endif
+};
diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
new file mode 100644
index 000000000..e71d64119
--- /dev/null
+++ b/arch/arc/kernel/kprobes.c
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/types.h>
+#include <linux/kprobes.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+#include <asm/current.h>
+#include <asm/disasm.h>
+
+#define MIN_STACK_SIZE(addr)	min((unsigned long)MAX_STACK_SIZE, \
+		(unsigned long)current_thread_info() + THREAD_SIZE - (addr))
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	/* Attempt to probe at unaligned address */
+	if ((unsigned long)p->addr & 0x01)
+		return -EINVAL;
+
+	/* Address should not be in exception handling code */
+
+	p->ainsn.is_short = is_short_instr((unsigned long)p->addr);
+	p->opcode = *p->addr;
+
+	return 0;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	*p->addr = UNIMP_S_INSTRUCTION;
+
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	*p->addr = p->opcode;
+
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	arch_disarm_kprobe(p);
+
+	/* Can we remove the kprobe in the middle of kprobe handling? */
+	if (p->ainsn.t1_addr) {
+		*(p->ainsn.t1_addr) = p->ainsn.t1_opcode;
+
+		flush_icache_range((unsigned long)p->ainsn.t1_addr,
+				   (unsigned long)p->ainsn.t1_addr +
+				   sizeof(kprobe_opcode_t));
+
+		p->ainsn.t1_addr = NULL;
+	}
+
+	if (p->ainsn.t2_addr) {
+		*(p->ainsn.t2_addr) = p->ainsn.t2_opcode;
+
+		flush_icache_range((unsigned long)p->ainsn.t2_addr,
+				   (unsigned long)p->ainsn.t2_addr +
+				   sizeof(kprobe_opcode_t));
+
+		p->ainsn.t2_addr = NULL;
+	}
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static inline void __kprobes set_current_kprobe(struct kprobe *p)
+{
+	__this_cpu_write(current_kprobe, p);
+}
+
+static void __kprobes resume_execution(struct kprobe *p, unsigned long addr,
+				       struct pt_regs *regs)
+{
+	/* Remove the trap instructions inserted for single step and
+	 * restore the original instructions
+	 */
+	if (p->ainsn.t1_addr) {
+		*(p->ainsn.t1_addr) = p->ainsn.t1_opcode;
+
+		flush_icache_range((unsigned long)p->ainsn.t1_addr,
+				   (unsigned long)p->ainsn.t1_addr +
+				   sizeof(kprobe_opcode_t));
+
+		p->ainsn.t1_addr = NULL;
+	}
+
+	if (p->ainsn.t2_addr) {
+		*(p->ainsn.t2_addr) = p->ainsn.t2_opcode;
+
+		flush_icache_range((unsigned long)p->ainsn.t2_addr,
+				   (unsigned long)p->ainsn.t2_addr +
+				   sizeof(kprobe_opcode_t));
+
+		p->ainsn.t2_addr = NULL;
+	}
+
+	return;
+}
+
+static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+	unsigned long next_pc;
+	unsigned long tgt_if_br = 0;
+	int is_branch;
+	unsigned long bta;
+
+	/* Copy the opcode back to the kprobe location and execute the
+	 * instruction. Because of this we will not be able to get into the
+	 * same kprobe until this kprobe is done
+	 */
+	*(p->addr) = p->opcode;
+
+	flush_icache_range((unsigned long)p->addr,
+			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
+
+	/* Now we insert the trap at the next location after this instruction to
+	 * single step. If it is a branch we insert the trap at possible branch
+	 * targets
+	 */
+
+	bta = regs->bta;
+
+	if (regs->status32 & 0x40) {
+		/* We are in a delay slot with the branch taken */
+
+		next_pc = bta & ~0x01;
+
+		if (!p->ainsn.is_short) {
+			if (bta & 0x01)
+				regs->blink += 2;
+			else {
+				/* Branch not taken */
+				next_pc += 2;
+
+				/* next pc is taken from bta after executing the
+				 * delay slot instruction
+				 */
+				regs->bta += 2;
+			}
+		}
+
+		is_branch = 0;
+	} else
+		is_branch =
+		    disasm_next_pc((unsigned long)p->addr, regs,
+			(struct callee_regs *) current->thread.callee_reg,
+			&next_pc, &tgt_if_br);
+
+	p->ainsn.t1_addr = (kprobe_opcode_t *) next_pc;
+	p->ainsn.t1_opcode = *(p->ainsn.t1_addr);
+	*(p->ainsn.t1_addr) = TRAP_S_2_INSTRUCTION;
+
+	flush_icache_range((unsigned long)p->ainsn.t1_addr,
+			   (unsigned long)p->ainsn.t1_addr +
+			   sizeof(kprobe_opcode_t));
+
+	if (is_branch) {
+		p->ainsn.t2_addr = (kprobe_opcode_t *) tgt_if_br;
+		p->ainsn.t2_opcode = *(p->ainsn.t2_addr);
+		*(p->ainsn.t2_addr) = TRAP_S_2_INSTRUCTION;
+
+		flush_icache_range((unsigned long)p->ainsn.t2_addr,
+				   (unsigned long)p->ainsn.t2_addr +
+				   sizeof(kprobe_opcode_t));
+	}
+}
+
+int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
+{
+	struct kprobe *p;
+	struct kprobe_ctlblk *kcb;
+
+	preempt_disable();
+
+	kcb = get_kprobe_ctlblk();
+	p = get_kprobe((unsigned long *)addr);
+
+	if (p) {
+		/*
+		 * We have reentered the kprobe_handler, since another kprobe
+		 * was hit while within the handler, we save the original
+		 * kprobes and single step on the instruction of the new probe
+		 * without calling any user handlers to avoid recursive
+		 * kprobes.
+		 */
+		if (kprobe_running()) {
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p);
+			kprobes_inc_nmissed_count(p);
+			setup_singlestep(p, regs);
+			kcb->kprobe_status = KPROBE_REENTER;
+			return 1;
+		}
+
+		set_current_kprobe(p);
+		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+		/* If we have no pre-handler or it returned 0, we continue with
+		 * normal processing. If we have a pre-handler and it returned
+		 * non-zero - which means user handler setup registers to exit
+		 * to another instruction, we must skip the single stepping.
+		 */
+		if (!p->pre_handler || !p->pre_handler(p, regs)) {
+			setup_singlestep(p, regs);
+			kcb->kprobe_status = KPROBE_HIT_SS;
+		} else {
+			reset_current_kprobe();
+			preempt_enable_no_resched();
+		}
+
+		return 1;
+	}
+
+	/* no_kprobe: */
+	preempt_enable_no_resched();
+	return 0;
+}
+
+static int __kprobes arc_post_kprobe_handler(unsigned long addr,
+					 struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (!cur)
+		return 0;
+
+	resume_execution(cur, addr, regs);
+
+	/* Rearm the kprobe */
+	arch_arm_kprobe(cur);
+
+	/*
+	 * When we return from trap instruction we go to the next instruction
+	 * We restored the actual instruction in resume_exectuiont and we to
+	 * return to the same address and execute it
+	 */
+	regs->ret = addr;
+
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
+	}
+
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		goto out;
+	}
+
+	reset_current_kprobe();
+
+out:
+	preempt_enable_no_resched();
+	return 1;
+}
+
+/*
+ * Fault can be for the instruction being single stepped or for the
+ * pre/post handlers in the module.
+ * This is applicable for applications like user probes, where we have the
+ * probe in user space and the handlers in the kernel
+ */
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned long trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		/*
+		 * We are here because the instruction being single stepped
+		 * caused the fault. We reset the current kprobe and allow the
+		 * exception handler as if it is regular exception. In our
+		 * case it doesn't matter because the system will be halted
+		 */
+		resume_execution(cur, (unsigned long)cur->addr, regs);
+
+		if (kcb->kprobe_status == KPROBE_REENTER)
+			restore_previous_kprobe(kcb);
+		else
+			reset_current_kprobe();
+
+		preempt_enable_no_resched();
+		break;
+
+	case KPROBE_HIT_ACTIVE:
+	case KPROBE_HIT_SSDONE:
+		/*
+		 * We are here because the instructions in the pre/post handler
+		 * caused the fault.
+		 */
+
+		/*
+		 * In case the user-specified fault handler returned zero,
+		 * try to fix up.
+		 */
+		if (fixup_exception(regs))
+			return 1;
+
+		/*
+		 * fixup_exception() could not handle it,
+		 * Let do_page_fault() fix it.
+		 */
+		break;
+
+	default:
+		break;
+	}
+	return 0;
+}
+
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+				       unsigned long val, void *data)
+{
+	struct die_args *args = data;
+	unsigned long addr = args->err;
+	int ret = NOTIFY_DONE;
+
+	switch (val) {
+	case DIE_IERR:
+		if (arc_kprobe_handler(addr, args->regs))
+			return NOTIFY_STOP;
+		break;
+
+	case DIE_TRAP:
+		if (arc_post_kprobe_handler(addr, args->regs))
+			return NOTIFY_STOP;
+		break;
+
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static void __used kretprobe_trampoline_holder(void)
+{
+	__asm__ __volatile__(".global __kretprobe_trampoline\n"
+			     "__kretprobe_trampoline:\n"
+			     "nop\n");
+}
+
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+
+	ri->ret_addr = (kprobe_opcode_t *) regs->blink;
+	ri->fp = NULL;
+
+	/* Replace the return addr with trampoline addr */
+	regs->blink = (unsigned long)&__kretprobe_trampoline;
+}
+
+static int __kprobes trampoline_probe_handler(struct kprobe *p,
+					      struct pt_regs *regs)
+{
+	regs->ret = __kretprobe_trampoline_handler(regs, NULL);
+
+	/* By returning a non zero value, we are telling the kprobe handler
+	 * that we don't want the post_handler to run
+	 */
+	return 1;
+}
+
+static struct kprobe trampoline_p = {
+	.addr = (kprobe_opcode_t *) &__kretprobe_trampoline,
+	.pre_handler = trampoline_probe_handler
+};
+
+int __init arch_init_kprobes(void)
+{
+	/* Registering the trampoline code for the kret probe */
+	return register_kprobe(&trampoline_p);
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	if (p->addr == (kprobe_opcode_t *) &__kretprobe_trampoline)
+		return 1;
+
+	return 0;
+}
+
+void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
+{
+	notify_die(DIE_TRAP, "kprobe_trap", regs, address, 0, SIGTRAP);
+}
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
new file mode 100644
index 000000000..f9fdb557c
--- /dev/null
+++ b/arch/arc/kernel/mcip.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARC ARConnect (MultiCore IP) support (formerly known as MCIP)
+ *
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/smp.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/spinlock.h>
+#include <soc/arc/mcip.h>
+#include <asm/irqflags-arcv2.h>
+#include <asm/setup.h>
+
+static DEFINE_RAW_SPINLOCK(mcip_lock);
+
+#ifdef CONFIG_SMP
+
+static char smp_cpuinfo_buf[128];
+
+/*
+ * Set mask to halt GFRC if any online core in SMP cluster is halted.
+ * Only works for ARC HS v3.0+, on earlier versions has no effect.
+ */
+static void mcip_update_gfrc_halt_mask(int cpu)
+{
+	struct bcr_generic gfrc;
+	unsigned long flags;
+	u32 gfrc_halt_mask;
+
+	READ_BCR(ARC_REG_GFRC_BUILD, gfrc);
+
+	/*
+	 * CMD_GFRC_SET_CORE and CMD_GFRC_READ_CORE commands were added in
+	 * GFRC 0x3 version.
+	 */
+	if (gfrc.ver < 0x3)
+		return;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	__mcip_cmd(CMD_GFRC_READ_CORE, 0);
+	gfrc_halt_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+	gfrc_halt_mask |= BIT(cpu);
+	__mcip_cmd_data(CMD_GFRC_SET_CORE, 0, gfrc_halt_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void mcip_update_debug_halt_mask(int cpu)
+{
+	u32 mcip_mask = 0;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	/*
+	 * mcip_mask is same for CMD_DEBUG_SET_SELECT and CMD_DEBUG_SET_MASK
+	 * commands. So read it once instead of reading both CMD_DEBUG_READ_MASK
+	 * and CMD_DEBUG_READ_SELECT.
+	 */
+	__mcip_cmd(CMD_DEBUG_READ_SELECT, 0);
+	mcip_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+	mcip_mask |= BIT(cpu);
+
+	__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, mcip_mask);
+	/*
+	 * Parameter specified halt cause:
+	 * STATUS32[H]/actionpoint/breakpoint/self-halt
+	 * We choose all of them (0xF).
+	 */
+	__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xF, mcip_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void mcip_setup_per_cpu(int cpu)
+{
+	struct mcip_bcr mp;
+
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+
+	smp_ipi_irq_setup(cpu, IPI_IRQ);
+	smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
+
+	/* Update GFRC halt mask as new CPU came online */
+	if (mp.gfrc)
+		mcip_update_gfrc_halt_mask(cpu);
+
+	/* Update MCIP debug mask as new CPU came online */
+	if (mp.dbg)
+		mcip_update_debug_halt_mask(cpu);
+}
+
+static void mcip_ipi_send(int cpu)
+{
+	unsigned long flags;
+	int ipi_was_pending;
+
+	/* ARConnect can only send IPI to others */
+	if (unlikely(cpu == raw_smp_processor_id())) {
+		arc_softirq_trigger(SOFTIRQ_IRQ);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	/*
+	 * If receiver already has a pending interrupt, elide sending this one.
+	 * Linux cross core calling works well with concurrent IPIs
+	 * coalesced into one
+	 * see arch/arc/kernel/smp.c: ipi_send_msg_one()
+	 */
+	__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
+	ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
+	if (!ipi_was_pending)
+		__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void mcip_ipi_clear(int irq)
+{
+	unsigned int cpu, c;
+	unsigned long flags;
+
+	if (unlikely(irq == SOFTIRQ_IRQ)) {
+		arc_softirq_clear(irq);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	/* Who sent the IPI */
+	__mcip_cmd(CMD_INTRPT_CHECK_SOURCE, 0);
+
+	cpu = read_aux_reg(ARC_REG_MCIP_READBACK);	/* 1,2,4,8... */
+
+	/*
+	 * In rare case, multiple concurrent IPIs sent to same target can
+	 * possibly be coalesced by MCIP into 1 asserted IRQ, so @cpus can be
+	 * "vectored" (multiple bits sets) as opposed to typical single bit
+	 */
+	do {
+		c = __ffs(cpu);			/* 0,1,2,3 */
+		__mcip_cmd(CMD_INTRPT_GENERATE_ACK, c);
+		cpu &= ~(1U << c);
+	} while (cpu);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void mcip_probe_n_setup(void)
+{
+	struct mcip_bcr mp;
+
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+
+	sprintf(smp_cpuinfo_buf,
+		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n",
+		mp.ver, mp.num_cores,
+		IS_AVAIL1(mp.ipi, "IPI "),
+		IS_AVAIL1(mp.idu, "IDU "),
+		IS_AVAIL1(mp.dbg, "DEBUG "),
+		IS_AVAIL1(mp.gfrc, "GFRC"));
+
+	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
+}
+
+struct plat_smp_ops plat_smp_ops = {
+	.info		= smp_cpuinfo_buf,
+	.init_early_smp	= mcip_probe_n_setup,
+	.init_per_cpu	= mcip_setup_per_cpu,
+	.ipi_send	= mcip_ipi_send,
+	.ipi_clear	= mcip_ipi_clear,
+};
+
+#endif
+
+/***************************************************************************
+ * ARCv2 Interrupt Distribution Unit (IDU)
+ *
+ * Connects external "COMMON" IRQs to core intc, providing:
+ *  -dynamic routing (IRQ affinity)
+ *  -load balancing (Round Robin interrupt distribution)
+ *  -1:N distribution
+ *
+ * It physically resides in the MCIP hw block
+ */
+
+#include <linux/irqchip.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+
+/*
+ * Set the DEST for @cmn_irq to @cpu_mask (1 bit per core)
+ */
+static void idu_set_dest(unsigned int cmn_irq, unsigned int cpu_mask)
+{
+	__mcip_cmd_data(CMD_IDU_SET_DEST, cmn_irq, cpu_mask);
+}
+
+static void idu_set_mode(unsigned int cmn_irq, bool set_lvl, unsigned int lvl,
+			 bool set_distr, unsigned int distr)
+{
+	union {
+		unsigned int word;
+		struct {
+			unsigned int distr:2, pad:2, lvl:1, pad2:27;
+		};
+	} data;
+
+	data.word = __mcip_cmd_read(CMD_IDU_READ_MODE, cmn_irq);
+	if (set_distr)
+		data.distr = distr;
+	if (set_lvl)
+		data.lvl = lvl;
+	__mcip_cmd_data(CMD_IDU_SET_MODE, cmn_irq, data.word);
+}
+
+static void idu_irq_mask_raw(irq_hw_number_t hwirq)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+	__mcip_cmd_data(CMD_IDU_SET_MASK, hwirq, 1);
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void idu_irq_mask(struct irq_data *data)
+{
+	idu_irq_mask_raw(data->hwirq);
+}
+
+static void idu_irq_unmask(struct irq_data *data)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+	__mcip_cmd_data(CMD_IDU_SET_MASK, data->hwirq, 0);
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void idu_irq_ack(struct irq_data *data)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+	__mcip_cmd(CMD_IDU_ACK_CIRQ, data->hwirq);
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void idu_irq_mask_ack(struct irq_data *data)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+	__mcip_cmd_data(CMD_IDU_SET_MASK, data->hwirq, 1);
+	__mcip_cmd(CMD_IDU_ACK_CIRQ, data->hwirq);
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static int
+idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
+		     bool force)
+{
+	unsigned long flags;
+	cpumask_t online;
+	unsigned int destination_bits;
+	unsigned int distribution_mode;
+
+	/* errout if no online cpu per @cpumask */
+	if (!cpumask_and(&online, cpumask, cpu_online_mask))
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	destination_bits = cpumask_bits(&online)[0];
+	idu_set_dest(data->hwirq, destination_bits);
+
+	if (ffs(destination_bits) == fls(destination_bits))
+		distribution_mode = IDU_M_DISTRI_DEST;
+	else
+		distribution_mode = IDU_M_DISTRI_RR;
+
+	idu_set_mode(data->hwirq, false, 0, true, distribution_mode);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+
+	return IRQ_SET_MASK_OK;
+}
+
+static int idu_irq_set_type(struct irq_data *data, u32 type)
+{
+	unsigned long flags;
+
+	/*
+	 * ARCv2 IDU HW does not support inverse polarity, so these are the
+	 * only interrupt types supported.
+	 */
+	if (type & ~(IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	idu_set_mode(data->hwirq, true,
+		     type & IRQ_TYPE_EDGE_RISING ? IDU_M_TRIG_EDGE :
+						   IDU_M_TRIG_LEVEL,
+		     false, 0);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+
+	return 0;
+}
+
+static void idu_irq_enable(struct irq_data *data)
+{
+	/*
+	 * By default send all common interrupts to all available online CPUs.
+	 * The affinity of common interrupts in IDU must be set manually since
+	 * in some cases the kernel will not call irq_set_affinity() by itself:
+	 *   1. When the kernel is not configured with support of SMP.
+	 *   2. When the kernel is configured with support of SMP but upper
+	 *      interrupt controllers does not support setting of the affinity
+	 *      and cannot propagate it to IDU.
+	 */
+	idu_irq_set_affinity(data, cpu_online_mask, false);
+	idu_irq_unmask(data);
+}
+
+static struct irq_chip idu_irq_chip = {
+	.name			= "MCIP IDU Intc",
+	.irq_mask		= idu_irq_mask,
+	.irq_unmask		= idu_irq_unmask,
+	.irq_ack		= idu_irq_ack,
+	.irq_mask_ack		= idu_irq_mask_ack,
+	.irq_enable		= idu_irq_enable,
+	.irq_set_type		= idu_irq_set_type,
+#ifdef CONFIG_SMP
+	.irq_set_affinity       = idu_irq_set_affinity,
+#endif
+
+};
+
+static void idu_cascade_isr(struct irq_desc *desc)
+{
+	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+	struct irq_chip *core_chip = irq_desc_get_chip(desc);
+	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
+	irq_hw_number_t idu_hwirq = core_hwirq - FIRST_EXT_IRQ;
+
+	chained_irq_enter(core_chip, desc);
+	generic_handle_domain_irq(idu_domain, idu_hwirq);
+	chained_irq_exit(core_chip, desc);
+}
+
+static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(virq, &idu_irq_chip, handle_level_irq);
+	irq_set_status_flags(virq, IRQ_MOVE_PCNTXT);
+
+	return 0;
+}
+
+static const struct irq_domain_ops idu_irq_ops = {
+	.xlate	= irq_domain_xlate_onetwocell,
+	.map	= idu_irq_map,
+};
+
+/*
+ * [16, 23]: Statically assigned always private-per-core (Timers, WDT, IPI)
+ * [24, 23+C]: If C > 0 then "C" common IRQs
+ * [24+C, N]: Not statically assigned, private-per-core
+ */
+
+
+static int __init
+idu_of_init(struct device_node *intc, struct device_node *parent)
+{
+	struct irq_domain *domain;
+	int nr_irqs;
+	int i, virq;
+	struct mcip_bcr mp;
+	struct mcip_idu_bcr idu_bcr;
+
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+
+	if (!mp.idu)
+		panic("IDU not detected, but DeviceTree using it");
+
+	READ_BCR(ARC_REG_MCIP_IDU_BCR, idu_bcr);
+	nr_irqs = mcip_idu_bcr_to_nr_irqs(idu_bcr);
+
+	pr_info("MCIP: IDU supports %u common irqs\n", nr_irqs);
+
+	domain = irq_domain_add_linear(intc, nr_irqs, &idu_irq_ops, NULL);
+
+	/* Parent interrupts (core-intc) are already mapped */
+
+	for (i = 0; i < nr_irqs; i++) {
+		/* Mask all common interrupts by default */
+		idu_irq_mask_raw(i);
+
+		/*
+		 * Return parent uplink IRQs (towards core intc) 24,25,.....
+		 * this step has been done before already
+		 * however we need it to get the parent virq and set IDU handler
+		 * as first level isr
+		 */
+		virq = irq_create_mapping(NULL, i + FIRST_EXT_IRQ);
+		BUG_ON(!virq);
+		irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain);
+	}
+
+	__mcip_cmd(CMD_IDU_ENABLE, 0);
+
+	return 0;
+}
+IRQCHIP_DECLARE(arcv2_idu_intc, "snps,archs-idu-intc", idu_of_init);
diff --git a/arch/arc/kernel/module.c b/arch/arc/kernel/module.c
new file mode 100644
index 000000000..c90c27904
--- /dev/null
+++ b/arch/arc/kernel/module.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/kernel.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <asm/unwind.h>
+
+static inline void arc_write_me(unsigned short *addr, unsigned long value)
+{
+	*addr = (value & 0xffff0000) >> 16;
+	*(addr + 1) = (value & 0xffff);
+}
+
+/*
+ * This gets called before relocation loop in generic loader
+ * Make a note of the section index of unwinding section
+ */
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+			      char *secstr, struct module *mod)
+{
+#ifdef CONFIG_ARC_DW2_UNWIND
+	mod->arch.unw_sec_idx = 0;
+	mod->arch.unw_info = NULL;
+#endif
+	mod->arch.secstr = secstr;
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+#ifdef CONFIG_ARC_DW2_UNWIND
+	if (mod->arch.unw_info)
+		unwind_remove_table(mod->arch.unw_info, 0);
+#endif
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,	/* sec index for sym tbl */
+		       unsigned int relsec,	/* sec index for relo sec */
+		       struct module *module)
+{
+	int i, n, relo_type;
+	Elf32_Rela *rel_entry = (void *)sechdrs[relsec].sh_addr;
+	Elf32_Sym *sym_entry, *sym_sec;
+	Elf32_Addr relocation, location, tgt_addr;
+	unsigned int tgtsec;
+
+	/*
+	 * @relsec has relocations e.g. .rela.init.text
+	 * @tgtsec is section to patch e.g. .init.text
+	 */
+	tgtsec = sechdrs[relsec].sh_info;
+	tgt_addr = sechdrs[tgtsec].sh_addr;
+	sym_sec = (Elf32_Sym *) sechdrs[symindex].sh_addr;
+	n = sechdrs[relsec].sh_size / sizeof(*rel_entry);
+
+	pr_debug("\nSection to fixup %s @%x\n",
+		 module->arch.secstr + sechdrs[tgtsec].sh_name, tgt_addr);
+	pr_debug("=========================================================\n");
+	pr_debug("r_off\tr_add\tst_value ADDRESS  VALUE\n");
+	pr_debug("=========================================================\n");
+
+	/* Loop thru entries in relocation section */
+	for (i = 0; i < n; i++) {
+		const char *s;
+
+		/* This is where to make the change */
+		location = tgt_addr + rel_entry[i].r_offset;
+
+		/* This is the symbol it is referring to.  Note that all
+		   undefined symbols have been resolved.  */
+		sym_entry = sym_sec + ELF32_R_SYM(rel_entry[i].r_info);
+
+		relocation = sym_entry->st_value + rel_entry[i].r_addend;
+
+		if (sym_entry->st_name == 0 && ELF_ST_TYPE (sym_entry->st_info) == STT_SECTION) {
+			s = module->arch.secstr + sechdrs[sym_entry->st_shndx].sh_name;
+		} else {
+			s = strtab + sym_entry->st_name;
+		}
+
+		pr_debug("   %x\t%x\t%x %x %x [%s]\n",
+			 rel_entry[i].r_offset, rel_entry[i].r_addend,
+			 sym_entry->st_value, location, relocation, s);
+
+		/* This assumes modules are built with -mlong-calls
+		 * so any branches/jumps are absolute 32 bit jmps
+		 * global data access again is abs 32 bit.
+		 * Both of these are handled by same relocation type
+		 */
+		relo_type = ELF32_R_TYPE(rel_entry[i].r_info);
+
+		if (likely(R_ARC_32_ME == relo_type))	/* ME ( S + A ) */
+			arc_write_me((unsigned short *)location, relocation);
+		else if (R_ARC_32 == relo_type)		/* ( S + A ) */
+			*((Elf32_Addr *) location) = relocation;
+		else if (R_ARC_32_PCREL == relo_type)	/* ( S + A ) - PDATA ) */
+			*((Elf32_Addr *) location) = relocation - location;
+		else
+			goto relo_err;
+
+	}
+
+#ifdef CONFIG_ARC_DW2_UNWIND
+	if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0)
+		module->arch.unw_sec_idx = tgtsec;
+#endif
+
+	return 0;
+
+relo_err:
+	pr_err("%s: unknown relocation: %u\n",
+		module->name, ELF32_R_TYPE(rel_entry[i].r_info));
+	return -ENOEXEC;
+
+}
+
+/* Just before lift off: After sections have been relocated, we add the
+ * dwarf section to unwinder table pool
+ * This couldn't be done in module_frob_arch_sections() because
+ * relocations had not been applied by then
+ */
+int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
+		    struct module *mod)
+{
+#ifdef CONFIG_ARC_DW2_UNWIND
+	void *unw;
+	int unwsec = mod->arch.unw_sec_idx;
+
+	if (unwsec) {
+		unw = unwind_add_table(mod, (void *)sechdrs[unwsec].sh_addr,
+				       sechdrs[unwsec].sh_size);
+		mod->arch.unw_info = unw;
+	}
+#endif
+	return 0;
+}
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
new file mode 100644
index 000000000..adff95796
--- /dev/null
+++ b/arch/arc/kernel/perf_event.c
@@ -0,0 +1,850 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Linux performance counter support for ARC CPUs.
+// This code is inspired by the perf support of various other architectures.
+//
+// Copyright (C) 2013-2018 Synopsys, Inc. (www.synopsys.com)
+
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+#include <asm/arcregs.h>
+#include <asm/stacktrace.h>
+
+/* HW holds 8 symbols + one for null terminator */
+#define ARCPMU_EVENT_NAME_LEN	9
+
+/*
+ * Some ARC pct quirks:
+ *
+ * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
+ * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
+ *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
+ *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
+ *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
+ *	STALLED_CYCLES_FRONTEND.
+ *
+ *	We could start multiple performance counters and combine everything
+ *	afterwards, but that makes it complicated.
+ *
+ *	Note that I$ cache misses aren't counted by either of the two!
+ */
+
+/*
+ * ARC PCT has hardware conditions with fixed "names" but variable "indexes"
+ * (based on a specific RTL build)
+ * Below is the static map between perf generic/arc specific event_id and
+ * h/w condition names.
+ * At the time of probe, we loop thru each index and find it's name to
+ * complete the mapping of perf event_id to h/w index as latter is needed
+ * to program the counter really
+ */
+static const char * const arc_pmu_ev_hw_map[] = {
+	/* count cycles */
+	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
+
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
+
+	/* counts condition */
+	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
+	/* All jump instructions that are taken */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
+#ifdef CONFIG_ISA_ARCV2
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
+#else
+	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
+#endif
+	[PERF_COUNT_ARC_LDC] = "imemrdc",	/* Instr: mem read cached */
+	[PERF_COUNT_ARC_STC] = "imemwrc",	/* Instr: mem write cached */
+
+	[PERF_COUNT_ARC_DCLM] = "dclm",		/* D-cache Load Miss */
+	[PERF_COUNT_ARC_DCSM] = "dcsm",		/* D-cache Store Miss */
+	[PERF_COUNT_ARC_ICM] = "icm",		/* I-cache Miss */
+	[PERF_COUNT_ARC_EDTLB] = "edtlb",	/* D-TLB Miss */
+	[PERF_COUNT_ARC_EITLB] = "eitlb",	/* I-TLB Miss */
+
+	[PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc",	/* Instr: mem read cached */
+	[PERF_COUNT_HW_CACHE_MISSES] = "dclm",		/* D-cache Load Miss */
+};
+
+#define C(_x)			PERF_COUNT_HW_CACHE_##_x
+#define CACHE_OP_UNSUPPORTED	0xffff
+
+static const unsigned int arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_STC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_HW_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
+		},
+			/* DTLB LD/ST Miss not segregated by h/w*/
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+enum arc_pmu_attr_groups {
+	ARCPMU_ATTR_GR_EVENTS,
+	ARCPMU_ATTR_GR_FORMATS,
+	ARCPMU_NR_ATTR_GR
+};
+
+struct arc_pmu_raw_event_entry {
+	char name[ARCPMU_EVENT_NAME_LEN];
+};
+
+struct arc_pmu {
+	struct pmu	pmu;
+	unsigned int	irq;
+	int		n_counters;
+	int		n_events;
+	u64		max_period;
+	int		ev_hw_idx[PERF_COUNT_ARC_HW_MAX];
+
+	struct arc_pmu_raw_event_entry	*raw_entry;
+	struct attribute		**attrs;
+	struct perf_pmu_events_attr	*attr;
+	const struct attribute_group	*attr_groups[ARCPMU_NR_ATTR_GR + 1];
+};
+
+struct arc_pmu_cpu {
+	/*
+	 * A 1 bit for an index indicates that the counter is being used for
+	 * an event. A 0 means that the counter can be used.
+	 */
+	unsigned long	used_mask[BITS_TO_LONGS(ARC_PERF_MAX_COUNTERS)];
+
+	/*
+	 * The events that are active on the PMU for the given index.
+	 */
+	struct perf_event *act_counter[ARC_PERF_MAX_COUNTERS];
+};
+
+struct arc_callchain_trace {
+	int depth;
+	void *perf_stuff;
+};
+
+static int callchain_trace(unsigned int addr, void *data)
+{
+	struct arc_callchain_trace *ctrl = data;
+	struct perf_callchain_entry_ctx *entry = ctrl->perf_stuff;
+
+	perf_callchain_store(entry, addr);
+
+	if (ctrl->depth++ < 3)
+		return 0;
+
+	return -1;
+}
+
+void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
+			   struct pt_regs *regs)
+{
+	struct arc_callchain_trace ctrl = {
+		.depth = 0,
+		.perf_stuff = entry,
+	};
+
+	arc_unwind_core(NULL, regs, callchain_trace, &ctrl);
+}
+
+void perf_callchain_user(struct perf_callchain_entry_ctx *entry,
+			 struct pt_regs *regs)
+{
+	/*
+	 * User stack can't be unwound trivially with kernel dwarf unwinder
+	 * So for now just record the user PC
+	 */
+	perf_callchain_store(entry, instruction_pointer(regs));
+}
+
+static struct arc_pmu *arc_pmu;
+static DEFINE_PER_CPU(struct arc_pmu_cpu, arc_pmu_cpu);
+
+/* read counter #idx; note that counter# != event# on ARC! */
+static u64 arc_pmu_read_counter(int idx)
+{
+	u32 tmp;
+	u64 result;
+
+	/*
+	 * ARC supports making 'snapshots' of the counters, so we don't
+	 * need to care about counters wrapping to 0 underneath our feet
+	 */
+	write_aux_reg(ARC_REG_PCT_INDEX, idx);
+	tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
+	write_aux_reg(ARC_REG_PCT_CONTROL, tmp | ARC_REG_PCT_CONTROL_SN);
+	result = (u64) (read_aux_reg(ARC_REG_PCT_SNAPH)) << 32;
+	result |= read_aux_reg(ARC_REG_PCT_SNAPL);
+
+	return result;
+}
+
+static void arc_perf_event_update(struct perf_event *event,
+				  struct hw_perf_event *hwc, int idx)
+{
+	u64 prev_raw_count = local64_read(&hwc->prev_count);
+	u64 new_raw_count = arc_pmu_read_counter(idx);
+	s64 delta = new_raw_count - prev_raw_count;
+
+	/*
+	 * We aren't afraid of hwc->prev_count changing beneath our feet
+	 * because there's no way for us to re-enter this function anytime.
+	 */
+	local64_set(&hwc->prev_count, new_raw_count);
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
+}
+
+static void arc_pmu_read(struct perf_event *event)
+{
+	arc_perf_event_update(event, &event->hw, event->hw.idx);
+}
+
+static int arc_pmu_cache_event(u64 config)
+{
+	unsigned int cache_type, cache_op, cache_result;
+	int ret;
+
+	cache_type	= (config >>  0) & 0xff;
+	cache_op	= (config >>  8) & 0xff;
+	cache_result	= (config >> 16) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return -EINVAL;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return -EINVAL;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ret = arc_pmu_cache_map[cache_type][cache_op][cache_result];
+
+	if (ret == CACHE_OP_UNSUPPORTED)
+		return -ENOENT;
+
+	pr_debug("init cache event: type/op/result %d/%d/%d with h/w %d \'%s\'\n",
+		 cache_type, cache_op, cache_result, ret,
+		 arc_pmu_ev_hw_map[ret]);
+
+	return ret;
+}
+
+/* initializes hw_perf_event structure if event is supported */
+static int arc_pmu_event_init(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int ret;
+
+	if (!is_sampling_event(event)) {
+		hwc->sample_period = arc_pmu->max_period;
+		hwc->last_period = hwc->sample_period;
+		local64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	hwc->config = 0;
+
+	if (is_isa_arcv2()) {
+		/* "exclude user" means "count only kernel" */
+		if (event->attr.exclude_user)
+			hwc->config |= ARC_REG_PCT_CONFIG_KERN;
+
+		/* "exclude kernel" means "count only user" */
+		if (event->attr.exclude_kernel)
+			hwc->config |= ARC_REG_PCT_CONFIG_USER;
+	}
+
+	switch (event->attr.type) {
+	case PERF_TYPE_HARDWARE:
+		if (event->attr.config >= PERF_COUNT_HW_MAX)
+			return -ENOENT;
+		if (arc_pmu->ev_hw_idx[event->attr.config] < 0)
+			return -ENOENT;
+		hwc->config |= arc_pmu->ev_hw_idx[event->attr.config];
+		pr_debug("init event %d with h/w %08x \'%s\'\n",
+			 (int)event->attr.config, (int)hwc->config,
+			 arc_pmu_ev_hw_map[event->attr.config]);
+		return 0;
+
+	case PERF_TYPE_HW_CACHE:
+		ret = arc_pmu_cache_event(event->attr.config);
+		if (ret < 0)
+			return ret;
+		hwc->config |= arc_pmu->ev_hw_idx[ret];
+		pr_debug("init cache event with h/w %08x \'%s\'\n",
+			 (int)hwc->config, arc_pmu_ev_hw_map[ret]);
+		return 0;
+
+	case PERF_TYPE_RAW:
+		if (event->attr.config >= arc_pmu->n_events)
+			return -ENOENT;
+
+		hwc->config |= event->attr.config;
+		pr_debug("init raw event with idx %lld \'%s\'\n",
+			 event->attr.config,
+			 arc_pmu->raw_entry[event->attr.config].name);
+
+		return 0;
+
+	default:
+		return -ENOENT;
+	}
+}
+
+/* starts all counters */
+static void arc_pmu_enable(struct pmu *pmu)
+{
+	u32 tmp;
+	tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
+	write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x1);
+}
+
+/* stops all counters */
+static void arc_pmu_disable(struct pmu *pmu)
+{
+	u32 tmp;
+	tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
+	write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x0);
+}
+
+static int arc_pmu_event_set_period(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	s64 left = local64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int idx = hwc->idx;
+	int overflow = 0;
+	u64 value;
+
+	if (unlikely(left <= -period)) {
+		/* left underflowed by more than period. */
+		left = period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		overflow = 1;
+	} else if (unlikely(left <= 0)) {
+		/* left underflowed by less than period. */
+		left += period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		overflow = 1;
+	}
+
+	if (left > arc_pmu->max_period)
+		left = arc_pmu->max_period;
+
+	value = arc_pmu->max_period - left;
+	local64_set(&hwc->prev_count, value);
+
+	/* Select counter */
+	write_aux_reg(ARC_REG_PCT_INDEX, idx);
+
+	/* Write value */
+	write_aux_reg(ARC_REG_PCT_COUNTL, lower_32_bits(value));
+	write_aux_reg(ARC_REG_PCT_COUNTH, upper_32_bits(value));
+
+	perf_event_update_userpage(event);
+
+	return overflow;
+}
+
+/*
+ * Assigns hardware counter to hardware condition.
+ * Note that there is no separate start/stop mechanism;
+ * stopping is achieved by assigning the 'never' condition
+ */
+static void arc_pmu_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	if (WARN_ON_ONCE(idx == -1))
+		return;
+
+	if (flags & PERF_EF_RELOAD)
+		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+
+	hwc->state = 0;
+
+	arc_pmu_event_set_period(event);
+
+	/* Enable interrupt for this counter */
+	if (is_sampling_event(event))
+		write_aux_reg(ARC_REG_PCT_INT_CTRL,
+			      read_aux_reg(ARC_REG_PCT_INT_CTRL) | BIT(idx));
+
+	/* enable ARC pmu here */
+	write_aux_reg(ARC_REG_PCT_INDEX, idx);		/* counter # */
+	write_aux_reg(ARC_REG_PCT_CONFIG, hwc->config);	/* condition */
+}
+
+static void arc_pmu_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	/* Disable interrupt for this counter */
+	if (is_sampling_event(event)) {
+		/*
+		 * Reset interrupt flag by writing of 1. This is required
+		 * to make sure pending interrupt was not left.
+		 */
+		write_aux_reg(ARC_REG_PCT_INT_ACT, BIT(idx));
+		write_aux_reg(ARC_REG_PCT_INT_CTRL,
+			      read_aux_reg(ARC_REG_PCT_INT_CTRL) & ~BIT(idx));
+	}
+
+	if (!(event->hw.state & PERF_HES_STOPPED)) {
+		/* stop hw counter here */
+		write_aux_reg(ARC_REG_PCT_INDEX, idx);
+
+		/* condition code #0 is always "never" */
+		write_aux_reg(ARC_REG_PCT_CONFIG, 0);
+
+		event->hw.state |= PERF_HES_STOPPED;
+	}
+
+	if ((flags & PERF_EF_UPDATE) &&
+	    !(event->hw.state & PERF_HES_UPTODATE)) {
+		arc_perf_event_update(event, &event->hw, idx);
+		event->hw.state |= PERF_HES_UPTODATE;
+	}
+}
+
+static void arc_pmu_del(struct perf_event *event, int flags)
+{
+	struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+
+	arc_pmu_stop(event, PERF_EF_UPDATE);
+	__clear_bit(event->hw.idx, pmu_cpu->used_mask);
+
+	pmu_cpu->act_counter[event->hw.idx] = 0;
+
+	perf_event_update_userpage(event);
+}
+
+/* allocate hardware counter and optionally start counting */
+static int arc_pmu_add(struct perf_event *event, int flags)
+{
+	struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+
+	idx = ffz(pmu_cpu->used_mask[0]);
+	if (idx == arc_pmu->n_counters)
+		return -EAGAIN;
+
+	__set_bit(idx, pmu_cpu->used_mask);
+	hwc->idx = idx;
+
+	write_aux_reg(ARC_REG_PCT_INDEX, idx);
+
+	pmu_cpu->act_counter[idx] = event;
+
+	if (is_sampling_event(event)) {
+		/* Mimic full counter overflow as other arches do */
+		write_aux_reg(ARC_REG_PCT_INT_CNTL,
+			      lower_32_bits(arc_pmu->max_period));
+		write_aux_reg(ARC_REG_PCT_INT_CNTH,
+			      upper_32_bits(arc_pmu->max_period));
+	}
+
+	write_aux_reg(ARC_REG_PCT_CONFIG, 0);
+	write_aux_reg(ARC_REG_PCT_COUNTL, 0);
+	write_aux_reg(ARC_REG_PCT_COUNTH, 0);
+	local64_set(&hwc->prev_count, 0);
+
+	hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+	if (flags & PERF_EF_START)
+		arc_pmu_start(event, PERF_EF_RELOAD);
+
+	perf_event_update_userpage(event);
+
+	return 0;
+}
+
+#ifdef CONFIG_ISA_ARCV2
+static irqreturn_t arc_pmu_intr(int irq, void *dev)
+{
+	struct perf_sample_data data;
+	struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+	struct pt_regs *regs;
+	unsigned int active_ints;
+	int idx;
+
+	arc_pmu_disable(&arc_pmu->pmu);
+
+	active_ints = read_aux_reg(ARC_REG_PCT_INT_ACT);
+	if (!active_ints)
+		goto done;
+
+	regs = get_irq_regs();
+
+	do {
+		struct perf_event *event;
+		struct hw_perf_event *hwc;
+
+		idx = __ffs(active_ints);
+
+		/* Reset interrupt flag by writing of 1 */
+		write_aux_reg(ARC_REG_PCT_INT_ACT, BIT(idx));
+
+		/*
+		 * On reset of "interrupt active" bit corresponding
+		 * "interrupt enable" bit gets automatically reset as well.
+		 * Now we need to re-enable interrupt for the counter.
+		 */
+		write_aux_reg(ARC_REG_PCT_INT_CTRL,
+			read_aux_reg(ARC_REG_PCT_INT_CTRL) | BIT(idx));
+
+		event = pmu_cpu->act_counter[idx];
+		hwc = &event->hw;
+
+		WARN_ON_ONCE(hwc->idx != idx);
+
+		arc_perf_event_update(event, &event->hw, event->hw.idx);
+		perf_sample_data_init(&data, 0, hwc->last_period);
+		if (arc_pmu_event_set_period(event)) {
+			if (perf_event_overflow(event, &data, regs))
+				arc_pmu_stop(event, 0);
+		}
+
+		active_ints &= ~BIT(idx);
+	} while (active_ints);
+
+done:
+	arc_pmu_enable(&arc_pmu->pmu);
+
+	return IRQ_HANDLED;
+}
+#else
+
+static irqreturn_t arc_pmu_intr(int irq, void *dev)
+{
+	return IRQ_NONE;
+}
+
+#endif /* CONFIG_ISA_ARCV2 */
+
+static void arc_cpu_pmu_irq_init(void *data)
+{
+	int irq = *(int *)data;
+
+	enable_percpu_irq(irq, IRQ_TYPE_NONE);
+
+	/* Clear all pending interrupt flags */
+	write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
+}
+
+/* Event field occupies the bottom 15 bits of our config field */
+PMU_FORMAT_ATTR(event, "config:0-14");
+static struct attribute *arc_pmu_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group arc_pmu_format_attr_gr = {
+	.name = "format",
+	.attrs = arc_pmu_format_attrs,
+};
+
+static ssize_t arc_pmu_events_sysfs_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *page)
+{
+	struct perf_pmu_events_attr *pmu_attr;
+
+	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+	return sprintf(page, "event=0x%04llx\n", pmu_attr->id);
+}
+
+/*
+ * We don't add attrs here as we don't have pre-defined list of perf events.
+ * We will generate and add attrs dynamically in probe() after we read HW
+ * configuration.
+ */
+static struct attribute_group arc_pmu_events_attr_gr = {
+	.name = "events",
+};
+
+static void arc_pmu_add_raw_event_attr(int j, char *str)
+{
+	memmove(arc_pmu->raw_entry[j].name, str, ARCPMU_EVENT_NAME_LEN - 1);
+	arc_pmu->attr[j].attr.attr.name = arc_pmu->raw_entry[j].name;
+	arc_pmu->attr[j].attr.attr.mode = VERIFY_OCTAL_PERMISSIONS(0444);
+	arc_pmu->attr[j].attr.show = arc_pmu_events_sysfs_show;
+	arc_pmu->attr[j].id = j;
+	arc_pmu->attrs[j] = &(arc_pmu->attr[j].attr.attr);
+}
+
+static int arc_pmu_raw_alloc(struct device *dev)
+{
+	arc_pmu->attr = devm_kmalloc_array(dev, arc_pmu->n_events + 1,
+		sizeof(*arc_pmu->attr), GFP_KERNEL | __GFP_ZERO);
+	if (!arc_pmu->attr)
+		return -ENOMEM;
+
+	arc_pmu->attrs = devm_kmalloc_array(dev, arc_pmu->n_events + 1,
+		sizeof(*arc_pmu->attrs), GFP_KERNEL | __GFP_ZERO);
+	if (!arc_pmu->attrs)
+		return -ENOMEM;
+
+	arc_pmu->raw_entry = devm_kmalloc_array(dev, arc_pmu->n_events,
+		sizeof(*arc_pmu->raw_entry), GFP_KERNEL | __GFP_ZERO);
+	if (!arc_pmu->raw_entry)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static inline bool event_in_hw_event_map(int i, char *name)
+{
+	if (!arc_pmu_ev_hw_map[i])
+		return false;
+
+	if (!strlen(arc_pmu_ev_hw_map[i]))
+		return false;
+
+	if (strcmp(arc_pmu_ev_hw_map[i], name))
+		return false;
+
+	return true;
+}
+
+static void arc_pmu_map_hw_event(int j, char *str)
+{
+	int i;
+
+	/* See if HW condition has been mapped to a perf event_id */
+	for (i = 0; i < ARRAY_SIZE(arc_pmu_ev_hw_map); i++) {
+		if (event_in_hw_event_map(i, str)) {
+			pr_debug("mapping perf event %2d to h/w event \'%8s\' (idx %d)\n",
+				 i, str, j);
+			arc_pmu->ev_hw_idx[i] = j;
+		}
+	}
+}
+
+static int arc_pmu_device_probe(struct platform_device *pdev)
+{
+	struct arc_reg_pct_build pct_bcr;
+	struct arc_reg_cc_build cc_bcr;
+	int i, has_interrupts, irq = -1;
+	int counter_size;	/* in bits */
+
+	union cc_name {
+		struct {
+			u32 word0, word1;
+			char sentinel;
+		} indiv;
+		char str[ARCPMU_EVENT_NAME_LEN];
+	} cc_name;
+
+
+	READ_BCR(ARC_REG_PCT_BUILD, pct_bcr);
+	if (!pct_bcr.v) {
+		pr_err("This core does not have performance counters!\n");
+		return -ENODEV;
+	}
+	BUILD_BUG_ON(ARC_PERF_MAX_COUNTERS > 32);
+	if (WARN_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS))
+		return -EINVAL;
+
+	READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
+	if (WARN(!cc_bcr.v, "Counters exist but No countable conditions?"))
+		return -EINVAL;
+
+	arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), GFP_KERNEL);
+	if (!arc_pmu)
+		return -ENOMEM;
+
+	arc_pmu->n_events = cc_bcr.c;
+
+	if (arc_pmu_raw_alloc(&pdev->dev))
+		return -ENOMEM;
+
+	has_interrupts = is_isa_arcv2() ? pct_bcr.i : 0;
+
+	arc_pmu->n_counters = pct_bcr.c;
+	counter_size = 32 + (pct_bcr.s << 4);
+
+	arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL;
+
+	pr_info("ARC perf\t: %d counters (%d bits), %d conditions%s\n",
+		arc_pmu->n_counters, counter_size, cc_bcr.c,
+		has_interrupts ? ", [overflow IRQ support]" : "");
+
+	cc_name.str[ARCPMU_EVENT_NAME_LEN - 1] = 0;
+	for (i = 0; i < PERF_COUNT_ARC_HW_MAX; i++)
+		arc_pmu->ev_hw_idx[i] = -1;
+
+	/* loop thru all available h/w condition indexes */
+	for (i = 0; i < cc_bcr.c; i++) {
+		write_aux_reg(ARC_REG_CC_INDEX, i);
+		cc_name.indiv.word0 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME0));
+		cc_name.indiv.word1 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME1));
+
+		arc_pmu_map_hw_event(i, cc_name.str);
+		arc_pmu_add_raw_event_attr(i, cc_name.str);
+	}
+
+	arc_pmu_events_attr_gr.attrs = arc_pmu->attrs;
+	arc_pmu->attr_groups[ARCPMU_ATTR_GR_EVENTS] = &arc_pmu_events_attr_gr;
+	arc_pmu->attr_groups[ARCPMU_ATTR_GR_FORMATS] = &arc_pmu_format_attr_gr;
+
+	arc_pmu->pmu = (struct pmu) {
+		.pmu_enable	= arc_pmu_enable,
+		.pmu_disable	= arc_pmu_disable,
+		.event_init	= arc_pmu_event_init,
+		.add		= arc_pmu_add,
+		.del		= arc_pmu_del,
+		.start		= arc_pmu_start,
+		.stop		= arc_pmu_stop,
+		.read		= arc_pmu_read,
+		.attr_groups	= arc_pmu->attr_groups,
+	};
+
+	if (has_interrupts) {
+		irq = platform_get_irq(pdev, 0);
+		if (irq >= 0) {
+			int ret;
+
+			arc_pmu->irq = irq;
+
+			/* intc map function ensures irq_set_percpu_devid() called */
+			ret = request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
+						 this_cpu_ptr(&arc_pmu_cpu));
+
+			if (!ret)
+				on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+			else
+				irq = -1;
+		}
+
+	}
+
+	if (irq == -1)
+		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+
+	/*
+	 * perf parser doesn't really like '-' symbol in events name, so let's
+	 * use '_' in arc pct name as it goes to kernel PMU event prefix.
+	 */
+	return perf_pmu_register(&arc_pmu->pmu, "arc_pct", PERF_TYPE_RAW);
+}
+
+static const struct of_device_id arc_pmu_match[] = {
+	{ .compatible = "snps,arc700-pct" },
+	{ .compatible = "snps,archs-pct" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, arc_pmu_match);
+
+static struct platform_driver arc_pmu_driver = {
+	.driver	= {
+		.name		= "arc-pct",
+		.of_match_table = of_match_ptr(arc_pmu_match),
+	},
+	.probe		= arc_pmu_device_probe,
+};
+
+module_platform_driver(arc_pmu_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mischa Jonker <mjonker@synopsys.com>");
+MODULE_DESCRIPTION("ARC PMU driver");
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
new file mode 100644
index 000000000..3369f0700
--- /dev/null
+++ b/arch/arc/kernel/process.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Amit Bhor, Kanika Nema: Codito Technologies 2004
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+#include <linux/elf.h>
+#include <linux/tick.h>
+
+#include <asm/fpu.h>
+
+SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
+{
+	task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
+	return 0;
+}
+
+/*
+ * We return the user space TLS data ptr as sys-call return code
+ * Ideally it should be copy to user.
+ * However we can cheat by the fact that some sys-calls do return
+ * absurdly high values
+ * Since the tls dat aptr is not going to be in range of 0xFFFF_xxxx
+ * it won't be considered a sys-call error
+ * and it will be loads better than copy-to-user, which is a definite
+ * D-TLB Miss
+ */
+SYSCALL_DEFINE0(arc_gettls)
+{
+	return task_thread_info(current)->thr_ptr;
+}
+
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
+{
+	struct pt_regs *regs = current_pt_regs();
+	u32 uval;
+	int ret;
+
+	/*
+	 * This is only for old cores lacking LLOCK/SCOND, which by definition
+	 * can't possibly be SMP. Thus doesn't need to be SMP safe.
+	 * And this also helps reduce the overhead for serializing in
+	 * the UP case
+	 */
+	WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
+
+	/* Z indicates to userspace if operation succeeded */
+	regs->status32 &= ~STATUS_Z_MASK;
+
+	ret = access_ok(uaddr, sizeof(*uaddr));
+	if (!ret)
+		 goto fail;
+
+again:
+	preempt_disable();
+
+	ret = __get_user(uval, uaddr);
+	if (ret)
+		 goto fault;
+
+	if (uval != expected)
+		 goto out;
+
+	ret = __put_user(new, uaddr);
+	if (ret)
+		 goto fault;
+
+	regs->status32 |= STATUS_Z_MASK;
+
+out:
+	preempt_enable();
+	return uval;
+
+fault:
+	preempt_enable();
+
+	if (unlikely(ret != -EFAULT))
+		 goto fail;
+
+	mmap_read_lock(current->mm);
+	ret = fixup_user_fault(current->mm, (unsigned long) uaddr,
+			       FAULT_FLAG_WRITE, NULL);
+	mmap_read_unlock(current->mm);
+
+	if (likely(!ret))
+		 goto again;
+
+fail:
+	force_sig(SIGSEGV);
+	return ret;
+}
+
+#ifdef CONFIG_ISA_ARCV2
+
+void arch_cpu_idle(void)
+{
+	/* Re-enable interrupts <= default irq priority before committing SLEEP */
+	const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
+
+	__asm__ __volatile__(
+		"sleep %0	\n"
+		:
+		:"I"(arg)); /* can't be "r" has to be embedded const */
+}
+
+#else	/* ARC700 */
+
+void arch_cpu_idle(void)
+{
+	/* sleep, but enable both set E1/E2 (levels of interrupts) before committing */
+	__asm__ __volatile__("sleep 0x3	\n");
+}
+
+#endif
+
+asmlinkage void ret_from_fork(void);
+
+/*
+ * Copy architecture-specific thread state
+ *
+ * Layout of Child kernel mode stack as setup at the end of this function is
+ *
+ * |     ...        |
+ * |     ...        |
+ * |    unused      |
+ * |                |
+ * ------------------
+ * |     r25        |   <==== top of Stack (thread.ksp)
+ * ~                ~
+ * |    --to--      |   (CALLEE Regs of kernel mode)
+ * |     r13        |
+ * ------------------
+ * |     fp         |
+ * |    blink       |   @ret_from_fork
+ * ------------------
+ * |                |
+ * ~                ~
+ * ~                ~
+ * |                |
+ * ------------------
+ * |     r12        |
+ * ~                ~
+ * |    --to--      |   (scratch Regs of user mode)
+ * |     r0         |
+ * ------------------
+ * |      SP        |
+ * |    orig_r0     |
+ * |    event/ECR   |
+ * |    user_r25    |
+ * ------------------  <===== END of PAGE
+ */
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
+{
+	unsigned long clone_flags = args->flags;
+	unsigned long usp = args->stack;
+	unsigned long tls = args->tls;
+	struct pt_regs *c_regs;        /* child's pt_regs */
+	unsigned long *childksp;       /* to unwind out of __switch_to() */
+	struct callee_regs *c_callee;  /* child's callee regs */
+	struct callee_regs *parent_callee;  /* paren't callee */
+	struct pt_regs *regs = current_pt_regs();
+
+	/* Mark the specific anchors to begin with (see pic above) */
+	c_regs = task_pt_regs(p);
+	childksp = (unsigned long *)c_regs - 2;  /* 2 words for FP/BLINK */
+	c_callee = ((struct callee_regs *)childksp) - 1;
+
+	/*
+	 * __switch_to() uses thread.ksp to start unwinding stack
+	 * For kernel threads we don't need to create callee regs, the
+	 * stack layout nevertheless needs to remain the same.
+	 * Also, since __switch_to anyways unwinds callee regs, we use
+	 * this to populate kernel thread entry-pt/args into callee regs,
+	 * so that ret_from_kernel_thread() becomes simpler.
+	 */
+	p->thread.ksp = (unsigned long)c_callee;	/* THREAD_KSP */
+
+	/* __switch_to expects FP(0), BLINK(return addr) at top */
+	childksp[0] = 0;			/* fp */
+	childksp[1] = (unsigned long)ret_from_fork; /* blink */
+
+	if (unlikely(args->fn)) {
+		memset(c_regs, 0, sizeof(struct pt_regs));
+
+		c_callee->r13 = (unsigned long)args->fn_arg;
+		c_callee->r14 = (unsigned long)args->fn;
+
+		return 0;
+	}
+
+	/*--------- User Task Only --------------*/
+
+	/* __switch_to expects FP(0), BLINK(return addr) at top of stack */
+	childksp[0] = 0;				/* for POP fp */
+	childksp[1] = (unsigned long)ret_from_fork;	/* for POP blink */
+
+	/* Copy parents pt regs on child's kernel mode stack */
+	*c_regs = *regs;
+
+	if (usp)
+		c_regs->sp = usp;
+
+	c_regs->r0 = 0;		/* fork returns 0 in child */
+
+	parent_callee = ((struct callee_regs *)regs) - 1;
+	*c_callee = *parent_callee;
+
+	if (unlikely(clone_flags & CLONE_SETTLS)) {
+		/*
+		 * set task's userland tls data ptr from 4th arg
+		 * clone C-lib call is difft from clone sys-call
+		 */
+		task_thread_info(p)->thr_ptr = tls;
+	} else {
+		/* Normal fork case: set parent's TLS ptr in child */
+		task_thread_info(p)->thr_ptr =
+		task_thread_info(current)->thr_ptr;
+	}
+
+
+	/*
+	 * setup usermode thread pointer #1:
+	 * when child is picked by scheduler, __switch_to() uses @c_callee to
+	 * populate usermode callee regs: this works (despite being in a kernel
+	 * function) since special return path for child @ret_from_fork()
+	 * ensures those regs are not clobbered all the way to RTIE to usermode
+	 */
+	c_callee->r25 = task_thread_info(p)->thr_ptr;
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/*
+	 * setup usermode thread pointer #2:
+	 * however for this special use of r25 in kernel, __switch_to() sets
+	 * r25 for kernel needs and only in the final return path is usermode
+	 * r25 setup, from pt_regs->user_r25. So set that up as well
+	 */
+	c_regs->user_r25 = c_callee->r25;
+#endif
+
+	return 0;
+}
+
+/*
+ * Do necessary setup to start up a new user task
+ */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
+{
+	regs->sp = usp;
+	regs->ret = pc;
+
+	/*
+	 * [U]ser Mode bit set
+	 * [L] ZOL loop inhibited to begin with - cleared by a LP insn
+	 * Interrupts enabled
+	 */
+	regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
+
+	fpu_init_task(regs);
+
+	/* bogus seed values for debugging */
+	regs->lp_start = 0x10;
+	regs->lp_end = 0x80;
+}
+
+/*
+ * Some archs flush debug and FPU info here
+ */
+void flush_thread(void)
+{
+}
+
+int elf_check_arch(const struct elf32_hdr *x)
+{
+	unsigned int eflags;
+
+	if (x->e_machine != EM_ARC_INUSE) {
+		pr_err("ELF not built for %s ISA\n",
+			is_isa_arcompact() ? "ARCompact":"ARCv2");
+		return 0;
+	}
+
+	eflags = x->e_flags;
+	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
+		pr_err("ABI mismatch - you need newer toolchain\n");
+		force_fatal_sig(SIGSEGV);
+		return 0;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(elf_check_arch);
diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c
new file mode 100644
index 000000000..da7542cea
--- /dev/null
+++ b/arch/arc/kernel/ptrace.c
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/ptrace.h>
+#include <linux/sched/task_stack.h>
+#include <linux/regset.h>
+#include <linux/unistd.h>
+#include <linux/elf.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+#ifdef CONFIG_ISA_ARCOMPACT
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(bta),
+	REG_OFFSET_NAME(lp_start),
+	REG_OFFSET_NAME(lp_end),
+	REG_OFFSET_NAME(lp_count),
+	REG_OFFSET_NAME(status32),
+	REG_OFFSET_NAME(ret),
+	REG_OFFSET_NAME(blink),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(r26),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(orig_r0),
+	REG_OFFSET_NAME(event),
+	REG_OFFSET_NAME(user_r25),
+	REG_OFFSET_END,
+};
+
+#else
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(orig_r0),
+	REG_OFFSET_NAME(event),
+	REG_OFFSET_NAME(bta),
+	REG_OFFSET_NAME(user_r25),
+	REG_OFFSET_NAME(r26),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r30),
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	REG_OFFSET_NAME(r58),
+	REG_OFFSET_NAME(r59),
+#endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	REG_OFFSET_NAME(DSP_CTRL),
+#endif
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(blink),
+	REG_OFFSET_NAME(lp_end),
+	REG_OFFSET_NAME(lp_start),
+	REG_OFFSET_NAME(lp_count),
+	REG_OFFSET_NAME(ei),
+	REG_OFFSET_NAME(ldi),
+	REG_OFFSET_NAME(jli),
+	REG_OFFSET_NAME(ret),
+	REG_OFFSET_NAME(status32),
+	REG_OFFSET_END,
+};
+#endif
+
+static struct callee_regs *task_callee_regs(struct task_struct *tsk)
+{
+	struct callee_regs *tmp = (struct callee_regs *)tsk->thread.callee_reg;
+	return tmp;
+}
+
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       struct membuf to)
+{
+	const struct pt_regs *ptregs = task_pt_regs(target);
+	const struct callee_regs *cregs = task_callee_regs(target);
+	unsigned int stop_pc_val;
+
+	membuf_zero(&to, 4);	// pad
+	membuf_store(&to, ptregs->bta);
+	membuf_store(&to, ptregs->lp_start);
+	membuf_store(&to, ptregs->lp_end);
+	membuf_store(&to, ptregs->lp_count);
+	membuf_store(&to, ptregs->status32);
+	membuf_store(&to, ptregs->ret);
+	membuf_store(&to, ptregs->blink);
+	membuf_store(&to, ptregs->fp);
+	membuf_store(&to, ptregs->r26);	// gp
+	membuf_store(&to, ptregs->r12);
+	membuf_store(&to, ptregs->r11);
+	membuf_store(&to, ptregs->r10);
+	membuf_store(&to, ptregs->r9);
+	membuf_store(&to, ptregs->r8);
+	membuf_store(&to, ptregs->r7);
+	membuf_store(&to, ptregs->r6);
+	membuf_store(&to, ptregs->r5);
+	membuf_store(&to, ptregs->r4);
+	membuf_store(&to, ptregs->r3);
+	membuf_store(&to, ptregs->r2);
+	membuf_store(&to, ptregs->r1);
+	membuf_store(&to, ptregs->r0);
+	membuf_store(&to, ptregs->sp);
+	membuf_zero(&to, 4);	// pad2
+	membuf_store(&to, cregs->r25);
+	membuf_store(&to, cregs->r24);
+	membuf_store(&to, cregs->r23);
+	membuf_store(&to, cregs->r22);
+	membuf_store(&to, cregs->r21);
+	membuf_store(&to, cregs->r20);
+	membuf_store(&to, cregs->r19);
+	membuf_store(&to, cregs->r18);
+	membuf_store(&to, cregs->r17);
+	membuf_store(&to, cregs->r16);
+	membuf_store(&to, cregs->r15);
+	membuf_store(&to, cregs->r14);
+	membuf_store(&to, cregs->r13);
+	membuf_store(&to, target->thread.fault_address); // efa
+
+	if (in_brkpt_trap(ptregs)) {
+		stop_pc_val = target->thread.fault_address;
+		pr_debug("\t\tstop_pc (brk-pt)\n");
+	} else {
+		stop_pc_val = ptregs->ret;
+		pr_debug("\t\tstop_pc (others)\n");
+	}
+
+	return membuf_store(&to, stop_pc_val); // stop_pc
+}
+
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	const struct pt_regs *ptregs = task_pt_regs(target);
+	const struct callee_regs *cregs = task_callee_regs(target);
+	int ret = 0;
+
+#define REG_IN_CHUNK(FIRST, NEXT, PTR)	\
+	if (!ret)			\
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, \
+			(void *)(PTR), \
+			offsetof(struct user_regs_struct, FIRST), \
+			offsetof(struct user_regs_struct, NEXT));
+
+#define REG_IN_ONE(LOC, PTR)		\
+	if (!ret)			\
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, \
+			(void *)(PTR), \
+			offsetof(struct user_regs_struct, LOC), \
+			offsetof(struct user_regs_struct, LOC) + 4);
+
+#define REG_IGNORE_ONE(LOC)		\
+	if (!ret)			\
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
+			offsetof(struct user_regs_struct, LOC), \
+			offsetof(struct user_regs_struct, LOC) + 4);
+
+	REG_IGNORE_ONE(pad);
+
+	REG_IN_ONE(scratch.bta, &ptregs->bta);
+	REG_IN_ONE(scratch.lp_start, &ptregs->lp_start);
+	REG_IN_ONE(scratch.lp_end, &ptregs->lp_end);
+	REG_IN_ONE(scratch.lp_count, &ptregs->lp_count);
+
+	REG_IGNORE_ONE(scratch.status32);
+
+	REG_IN_ONE(scratch.ret, &ptregs->ret);
+	REG_IN_ONE(scratch.blink, &ptregs->blink);
+	REG_IN_ONE(scratch.fp, &ptregs->fp);
+	REG_IN_ONE(scratch.gp, &ptregs->r26);
+	REG_IN_ONE(scratch.r12, &ptregs->r12);
+	REG_IN_ONE(scratch.r11, &ptregs->r11);
+	REG_IN_ONE(scratch.r10, &ptregs->r10);
+	REG_IN_ONE(scratch.r9, &ptregs->r9);
+	REG_IN_ONE(scratch.r8, &ptregs->r8);
+	REG_IN_ONE(scratch.r7, &ptregs->r7);
+	REG_IN_ONE(scratch.r6, &ptregs->r6);
+	REG_IN_ONE(scratch.r5, &ptregs->r5);
+	REG_IN_ONE(scratch.r4, &ptregs->r4);
+	REG_IN_ONE(scratch.r3, &ptregs->r3);
+	REG_IN_ONE(scratch.r2, &ptregs->r2);
+	REG_IN_ONE(scratch.r1, &ptregs->r1);
+	REG_IN_ONE(scratch.r0, &ptregs->r0);
+	REG_IN_ONE(scratch.sp, &ptregs->sp);
+
+	REG_IGNORE_ONE(pad2);
+
+	REG_IN_ONE(callee.r25, &cregs->r25);
+	REG_IN_ONE(callee.r24, &cregs->r24);
+	REG_IN_ONE(callee.r23, &cregs->r23);
+	REG_IN_ONE(callee.r22, &cregs->r22);
+	REG_IN_ONE(callee.r21, &cregs->r21);
+	REG_IN_ONE(callee.r20, &cregs->r20);
+	REG_IN_ONE(callee.r19, &cregs->r19);
+	REG_IN_ONE(callee.r18, &cregs->r18);
+	REG_IN_ONE(callee.r17, &cregs->r17);
+	REG_IN_ONE(callee.r16, &cregs->r16);
+	REG_IN_ONE(callee.r15, &cregs->r15);
+	REG_IN_ONE(callee.r14, &cregs->r14);
+	REG_IN_ONE(callee.r13, &cregs->r13);
+
+	REG_IGNORE_ONE(efa);			/* efa update invalid */
+	REG_IGNORE_ONE(stop_pc);		/* PC updated via @ret */
+
+	return ret;
+}
+
+#ifdef CONFIG_ISA_ARCV2
+static int arcv2regs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       struct membuf to)
+{
+	const struct pt_regs *regs = task_pt_regs(target);
+
+	if (IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS))
+		/*
+		 * itemized copy not needed like above as layout of regs (r30,r58,r59)
+		 * is exactly same in kernel (pt_regs) and userspace (user_regs_arcv2)
+		 */
+		return membuf_write(&to, &regs->r30, sizeof(struct user_regs_arcv2));
+
+
+	membuf_write(&to, &regs->r30, 4); /* r30 only */
+	return membuf_zero(&to, sizeof(struct user_regs_arcv2) - 4);
+}
+
+static int arcv2regs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	const struct pt_regs *regs = task_pt_regs(target);
+	int ret, copy_sz;
+
+	if (IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS))
+		copy_sz = sizeof(struct user_regs_arcv2);
+	else
+		copy_sz = 4;	/* r30 only */
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, (void *)&regs->r30,
+				  0, copy_sz);
+
+	return ret;
+}
+
+#endif
+
+enum arc_getset {
+	REGSET_CMN,
+	REGSET_ARCV2,
+};
+
+static const struct user_regset arc_regsets[] = {
+	[REGSET_CMN] = {
+	       .core_note_type = NT_PRSTATUS,
+	       .n = ELF_NGREG,
+	       .size = sizeof(unsigned long),
+	       .align = sizeof(unsigned long),
+	       .regset_get = genregs_get,
+	       .set = genregs_set,
+	},
+#ifdef CONFIG_ISA_ARCV2
+	[REGSET_ARCV2] = {
+	       .core_note_type = NT_ARC_V2,
+	       .n = ELF_ARCV2REG,
+	       .size = sizeof(unsigned long),
+	       .align = sizeof(unsigned long),
+	       .regset_get = arcv2regs_get,
+	       .set = arcv2regs_set,
+	},
+#endif
+};
+
+static const struct user_regset_view user_arc_view = {
+	.name		= "arc",
+	.e_machine	= EM_ARC_INUSE,
+	.regsets	= arc_regsets,
+	.n		= ARRAY_SIZE(arc_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_arc_view;
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	int ret = -EIO;
+
+	pr_debug("REQ=%ld: ADDR =0x%lx, DATA=0x%lx)\n", request, addr, data);
+
+	switch (request) {
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(task_thread_info(child)->thr_ptr,
+			       (unsigned long __user *)data);
+		break;
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+asmlinkage int syscall_trace_entry(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		if (ptrace_report_syscall_entry(regs))
+			return ULONG_MAX;
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_enter(regs, syscall_get_nr(current, regs));
+#endif
+
+	return regs->r8;
+}
+
+asmlinkage void syscall_trace_exit(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ptrace_report_syscall_exit(regs, 0);
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_exit(regs, regs_return_value(regs));
+#endif
+}
+
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return (addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1));
+}
+
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
diff --git a/arch/arc/kernel/reset.c b/arch/arc/kernel/reset.c
new file mode 100644
index 000000000..fd6c3eb93
--- /dev/null
+++ b/arch/arc/kernel/reset.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/reboot.h>
+#include <linux/pm.h>
+
+void machine_halt(void)
+{
+	/* Halt the processor */
+	__asm__ __volatile__("flag  1\n");
+}
+
+void machine_restart(char *__unused)
+{
+	/* Soft reset : jump to reset vector */
+	pr_info("Put your restart handler here\n");
+	machine_halt();
+}
+
+void machine_power_off(void)
+{
+	/* FIXME ::  power off ??? */
+	machine_halt();
+}
+
+void (*pm_power_off) (void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
new file mode 100644
index 000000000..41f07b3e5
--- /dev/null
+++ b/arch/arc/kernel/setup.c
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/root_dev.h>
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/sizes.h>
+#include <linux/cpu.h>
+#include <linux/of_clk.h>
+#include <linux/of_fdt.h>
+#include <linux/of.h>
+#include <linux/cache.h>
+#include <uapi/linux/mount.h>
+#include <asm/sections.h>
+#include <asm/arcregs.h>
+#include <asm/asserts.h>
+#include <asm/tlb.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/irq.h>
+#include <asm/unwind.h>
+#include <asm/mach_desc.h>
+#include <asm/smp.h>
+#include <asm/dsp-impl.h>
+
+#define FIX_PTR(x)  __asm__ __volatile__(";" : "+r"(x))
+
+unsigned int intr_to_DE_cnt;
+
+/* Part of U-boot ABI: see head.S */
+int __initdata uboot_tag;
+int __initdata uboot_magic;
+char __initdata *uboot_arg;
+
+const struct machine_desc *machine_desc;
+
+struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
+
+struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
+
+static const struct id_to_str arc_legacy_rel[] = {
+	/* ID.ARCVER,	Release */
+#ifdef CONFIG_ISA_ARCOMPACT
+	{ 0x34, 	"R4.10"},
+	{ 0x35, 	"R4.11"},
+#else
+	{ 0x51, 	"R2.0" },
+	{ 0x52, 	"R2.1" },
+	{ 0x53,		"R3.0" },
+#endif
+	{ 0x00,		NULL   }
+};
+
+static const struct id_to_str arc_hs_ver54_rel[] = {
+	/* UARCH.MAJOR,	Release */
+	{  0,		"R3.10a"},
+	{  1,		"R3.50a"},
+	{  2,		"R3.60a"},
+	{  3,		"R4.00a"},
+	{  0xFF,	NULL   }
+};
+
+static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
+{
+	if (is_isa_arcompact()) {
+		struct bcr_iccm_arcompact iccm;
+		struct bcr_dccm_arcompact dccm;
+
+		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+		if (iccm.ver) {
+			cpu->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
+			cpu->iccm.base_addr = iccm.base << 16;
+		}
+
+		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+		if (dccm.ver) {
+			unsigned long base;
+			cpu->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
+
+			base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
+			cpu->dccm.base_addr = base & ~0xF;
+		}
+	} else {
+		struct bcr_iccm_arcv2 iccm;
+		struct bcr_dccm_arcv2 dccm;
+		unsigned long region;
+
+		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+		if (iccm.ver) {
+			cpu->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
+			if (iccm.sz00 == 0xF && iccm.sz01 > 0)
+				cpu->iccm.sz <<= iccm.sz01;
+
+			region = read_aux_reg(ARC_REG_AUX_ICCM);
+			cpu->iccm.base_addr = region & 0xF0000000;
+		}
+
+		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+		if (dccm.ver) {
+			cpu->dccm.sz = 256 << dccm.sz0;
+			if (dccm.sz0 == 0xF && dccm.sz1 > 0)
+				cpu->dccm.sz <<= dccm.sz1;
+
+			region = read_aux_reg(ARC_REG_AUX_DCCM);
+			cpu->dccm.base_addr = region & 0xF0000000;
+		}
+	}
+}
+
+static void decode_arc_core(struct cpuinfo_arc *cpu)
+{
+	struct bcr_uarch_build_arcv2 uarch;
+	const struct id_to_str *tbl;
+
+	if (cpu->core.family < 0x54) { /* includes arc700 */
+
+		for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) {
+			if (cpu->core.family == tbl->id) {
+				cpu->release = tbl->str;
+				break;
+			}
+		}
+
+		if (is_isa_arcompact())
+			cpu->name = "ARC700";
+		else if (tbl->str)
+			cpu->name = "HS38";
+		else
+			cpu->name = cpu->release = "Unknown";
+
+		return;
+	}
+
+	/*
+	 * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
+	 * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
+	 * releases only update it.
+	 */
+	READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
+
+	if (uarch.prod == 4) {
+		cpu->name = "HS48";
+		cpu->extn.dual = 1;
+
+	} else {
+		cpu->name = "HS38";
+	}
+
+	for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
+		if (uarch.maj == tbl->id) {
+			cpu->release = tbl->str;
+			break;
+		}
+	}
+}
+
+static void read_arc_build_cfg_regs(void)
+{
+	struct bcr_timer timer;
+	struct bcr_generic bcr;
+	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+	struct bcr_isa_arcv2 isa;
+	struct bcr_actionpoint ap;
+
+	FIX_PTR(cpu);
+
+	READ_BCR(AUX_IDENTITY, cpu->core);
+	decode_arc_core(cpu);
+
+	READ_BCR(ARC_REG_TIMERS_BCR, timer);
+	cpu->extn.timer0 = timer.t0;
+	cpu->extn.timer1 = timer.t1;
+	cpu->extn.rtc = timer.rtc;
+
+	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
+
+	READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
+
+	/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
+	read_decode_ccm_bcr(cpu);
+
+	read_decode_mmu_bcr();
+	read_decode_cache_bcr();
+
+	if (is_isa_arcompact()) {
+		struct bcr_fp_arcompact sp, dp;
+		struct bcr_bpu_arcompact bpu;
+
+		READ_BCR(ARC_REG_FP_BCR, sp);
+		READ_BCR(ARC_REG_DPFP_BCR, dp);
+		cpu->extn.fpu_sp = sp.ver ? 1 : 0;
+		cpu->extn.fpu_dp = dp.ver ? 1 : 0;
+
+		READ_BCR(ARC_REG_BPU_BCR, bpu);
+		cpu->bpu.ver = bpu.ver;
+		cpu->bpu.full = bpu.fam ? 1 : 0;
+		if (bpu.ent) {
+			cpu->bpu.num_cache = 256 << (bpu.ent - 1);
+			cpu->bpu.num_pred = 256 << (bpu.ent - 1);
+		}
+	} else {
+		struct bcr_fp_arcv2 spdp;
+		struct bcr_bpu_arcv2 bpu;
+
+		READ_BCR(ARC_REG_FP_V2_BCR, spdp);
+		cpu->extn.fpu_sp = spdp.sp ? 1 : 0;
+		cpu->extn.fpu_dp = spdp.dp ? 1 : 0;
+
+		READ_BCR(ARC_REG_BPU_BCR, bpu);
+		cpu->bpu.ver = bpu.ver;
+		cpu->bpu.full = bpu.ft;
+		cpu->bpu.num_cache = 256 << bpu.bce;
+		cpu->bpu.num_pred = 2048 << bpu.pte;
+		cpu->bpu.ret_stk = 4 << bpu.rse;
+
+		/* if dual issue hardware, is it enabled ? */
+		if (cpu->extn.dual) {
+			unsigned int exec_ctrl;
+
+			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
+			cpu->extn.dual_enb = !(exec_ctrl & 1);
+		}
+	}
+
+	READ_BCR(ARC_REG_AP_BCR, ap);
+	if (ap.ver) {
+		cpu->extn.ap_num = 2 << ap.num;
+		cpu->extn.ap_full = !ap.min;
+	}
+
+	READ_BCR(ARC_REG_SMART_BCR, bcr);
+	cpu->extn.smart = bcr.ver ? 1 : 0;
+
+	READ_BCR(ARC_REG_RTT_BCR, bcr);
+	cpu->extn.rtt = bcr.ver ? 1 : 0;
+
+	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
+
+	/* some hacks for lack of feature BCR info in old ARC700 cores */
+	if (is_isa_arcompact()) {
+		if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
+			cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
+		else {
+			/* ARC700_BUILD only has 2 bits of isa info */
+			struct bcr_generic bcr = *(struct bcr_generic *)&isa;
+			cpu->isa.atomic = bcr.info & 1;
+		}
+
+		cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
+
+		 /* there's no direct way to distinguish 750 vs. 770 */
+		if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3))
+			cpu->name = "ARC750";
+	} else {
+		cpu->isa = isa;
+	}
+}
+
+static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
+{
+	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
+	struct bcr_identity *core = &cpu->core;
+	char mpy_opt[16];
+	int n = 0;
+
+	FIX_PTR(cpu);
+
+	n += scnprintf(buf + n, len - n,
+		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
+		       core->family, core->cpu_id, core->chip_id);
+
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
+		       cpu_id, cpu->name, cpu->release,
+		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
+		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
+		       IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue "));
+
+	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
+		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
+		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
+		       IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
+		       IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
+
+	if (cpu->extn_mpy.ver) {
+		if (is_isa_arcompact()) {
+			scnprintf(mpy_opt, 16, "mpy");
+		} else {
+
+			int opt = 2;	/* stock MPY/MPYH */
+
+			if (cpu->extn_mpy.dsp)	/* OPT 7-9 */
+				opt = cpu->extn_mpy.dsp + 6;
+
+			scnprintf(mpy_opt, 16, "mpy[opt %d] ", opt);
+		}
+	}
+
+	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
+		       IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+		       IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
+		       IS_AVAIL2(cpu->isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
+		       IS_AVAIL1(cpu->extn_mpy.ver, mpy_opt),
+		       IS_AVAIL1(cpu->isa.div_rem, "div_rem "));
+
+	if (cpu->bpu.ver) {
+		n += scnprintf(buf + n, len - n,
+			      "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d",
+			      IS_AVAIL1(cpu->bpu.full, "full"),
+			      IS_AVAIL1(!cpu->bpu.full, "partial"),
+			      cpu->bpu.num_cache, cpu->bpu.num_pred, cpu->bpu.ret_stk);
+
+		if (is_isa_arcv2()) {
+			struct bcr_lpb lpb;
+
+			READ_BCR(ARC_REG_LPB_BUILD, lpb);
+			if (lpb.ver) {
+				unsigned int ctl;
+				ctl = read_aux_reg(ARC_REG_LPB_CTRL);
+
+				n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s",
+					       lpb.entries,
+					       IS_DISABLED_RUN(!ctl));
+			}
+		}
+		n += scnprintf(buf + n, len - n, "\n");
+	}
+
+	return buf;
+}
+
+static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
+{
+	int n = 0;
+	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
+
+	FIX_PTR(cpu);
+
+	n += scnprintf(buf + n, len - n, "Vector Table\t: %#x\n", cpu->vec_base);
+
+	if (cpu->extn.fpu_sp || cpu->extn.fpu_dp)
+		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
+			       IS_AVAIL1(cpu->extn.fpu_sp, "SP "),
+			       IS_AVAIL1(cpu->extn.fpu_dp, "DP "));
+
+	if (cpu->extn.ap_num | cpu->extn.smart | cpu->extn.rtt) {
+		n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s",
+			       IS_AVAIL1(cpu->extn.smart, "smaRT "),
+			       IS_AVAIL1(cpu->extn.rtt, "RTT "));
+		if (cpu->extn.ap_num) {
+			n += scnprintf(buf + n, len - n, "ActionPoint %d/%s",
+				       cpu->extn.ap_num,
+				       cpu->extn.ap_full ? "full":"min");
+		}
+		n += scnprintf(buf + n, len - n, "\n");
+	}
+
+	if (cpu->dccm.sz || cpu->iccm.sz)
+		n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n",
+			       cpu->dccm.base_addr, TO_KB(cpu->dccm.sz),
+			       cpu->iccm.base_addr, TO_KB(cpu->iccm.sz));
+
+	if (is_isa_arcv2()) {
+
+		/* Error Protection: ECC/Parity */
+		struct bcr_erp erp;
+		READ_BCR(ARC_REG_ERP_BUILD, erp);
+
+		if (erp.ver) {
+			struct  ctl_erp ctl;
+			READ_BCR(ARC_REG_ERP_CTRL, ctl);
+
+			/* inverted bits: 0 means enabled */
+			n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n",
+				IS_AVAIL3(erp.ic,  !ctl.dpi, "IC "),
+				IS_AVAIL3(erp.dc,  !ctl.dpd, "DC "),
+				IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU "));
+		}
+	}
+
+	return buf;
+}
+
+void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena)
+{
+	if (hw_exists && !opt_ena)
+		pr_warn(" ! Enable %s for working apps\n", opt_name);
+	else if (!hw_exists && opt_ena)
+		panic("Disable %s, hardware NOT present\n", opt_name);
+}
+
+void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena)
+{
+	if (!hw_exists && opt_ena)
+		panic("Disable %s, hardware NOT present\n", opt_name);
+}
+
+static void arc_chk_core_config(void)
+{
+	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+	int present = 0;
+
+	if (!cpu->extn.timer0)
+		panic("Timer0 is not present!\n");
+
+	if (!cpu->extn.timer1)
+		panic("Timer1 is not present!\n");
+
+#ifdef CONFIG_ARC_HAS_DCCM
+	/*
+	 * DCCM can be arbit placed in hardware.
+	 * Make sure it's placement/sz matches what Linux is built with
+	 */
+	if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
+		panic("Linux built with incorrect DCCM Base address\n");
+
+	if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz)
+		panic("Linux built with incorrect DCCM Size\n");
+#endif
+
+#ifdef CONFIG_ARC_HAS_ICCM
+	if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz)
+		panic("Linux built with incorrect ICCM Size\n");
+#endif
+
+	/*
+	 * FP hardware/software config sanity
+	 * -If hardware present, kernel needs to save/restore FPU state
+	 * -If not, it will crash trying to save/restore the non-existant regs
+	 */
+
+	if (is_isa_arcompact()) {
+		/* only DPDP checked since SP has no arch visible regs */
+		present = cpu->extn.fpu_dp;
+		CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present);
+	} else {
+		/* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */
+		present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp;
+		CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present);
+
+		dsp_config_check();
+	}
+}
+
+/*
+ * Initialize and setup the processor core
+ * This is called by all the CPUs thus should not do special case stuff
+ *    such as only for boot CPU etc
+ */
+
+void setup_processor(void)
+{
+	char str[512];
+	int cpu_id = smp_processor_id();
+
+	read_arc_build_cfg_regs();
+	arc_init_IRQ();
+
+	pr_info("%s", arc_cpu_mumbojumbo(cpu_id, str, sizeof(str)));
+
+	arc_mmu_init();
+	arc_cache_init();
+
+	pr_info("%s", arc_extn_mumbojumbo(cpu_id, str, sizeof(str)));
+	pr_info("%s", arc_platform_smp_cpuinfo());
+
+	arc_chk_core_config();
+}
+
+static inline bool uboot_arg_invalid(unsigned long addr)
+{
+	/*
+	 * Check that it is a untranslated address (although MMU is not enabled
+	 * yet, it being a high address ensures this is not by fluke)
+	 */
+	if (addr < PAGE_OFFSET)
+		return true;
+
+	/* Check that address doesn't clobber resident kernel image */
+	return addr >= (unsigned long)_stext && addr <= (unsigned long)_end;
+}
+
+#define IGNORE_ARGS		"Ignore U-boot args: "
+
+/* uboot_tag values for U-boot - kernel ABI revision 0; see head.S */
+#define UBOOT_TAG_NONE		0
+#define UBOOT_TAG_CMDLINE	1
+#define UBOOT_TAG_DTB		2
+/* We always pass 0 as magic from U-boot */
+#define UBOOT_MAGIC_VALUE	0
+
+void __init handle_uboot_args(void)
+{
+	bool use_embedded_dtb = true;
+	bool append_cmdline = false;
+
+	/* check that we know this tag */
+	if (uboot_tag != UBOOT_TAG_NONE &&
+	    uboot_tag != UBOOT_TAG_CMDLINE &&
+	    uboot_tag != UBOOT_TAG_DTB) {
+		pr_warn(IGNORE_ARGS "invalid uboot tag: '%08x'\n", uboot_tag);
+		goto ignore_uboot_args;
+	}
+
+	if (uboot_magic != UBOOT_MAGIC_VALUE) {
+		pr_warn(IGNORE_ARGS "non zero uboot magic\n");
+		goto ignore_uboot_args;
+	}
+
+	if (uboot_tag != UBOOT_TAG_NONE &&
+            uboot_arg_invalid((unsigned long)uboot_arg)) {
+		pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg);
+		goto ignore_uboot_args;
+	}
+
+	/* see if U-boot passed an external Device Tree blob */
+	if (uboot_tag == UBOOT_TAG_DTB) {
+		machine_desc = setup_machine_fdt((void *)uboot_arg);
+
+		/* external Device Tree blob is invalid - use embedded one */
+		use_embedded_dtb = !machine_desc;
+	}
+
+	if (uboot_tag == UBOOT_TAG_CMDLINE)
+		append_cmdline = true;
+
+ignore_uboot_args:
+
+	if (use_embedded_dtb) {
+		machine_desc = setup_machine_fdt(__dtb_start);
+		if (!machine_desc)
+			panic("Embedded DT invalid\n");
+	}
+
+	/*
+	 * NOTE: @boot_command_line is populated by setup_machine_fdt() so this
+	 * append processing can only happen after.
+	 */
+	if (append_cmdline) {
+		/* Ensure a whitespace between the 2 cmdlines */
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, uboot_arg, COMMAND_LINE_SIZE);
+	}
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+	handle_uboot_args();
+
+	/* Save unparsed command line copy for /proc/cmdline */
+	*cmdline_p = boot_command_line;
+
+	/* To force early parsing of things like mem=xxx */
+	parse_early_param();
+
+	/* Platform/board specific: e.g. early console registration */
+	if (machine_desc->init_early)
+		machine_desc->init_early();
+
+	smp_init_cpus();
+
+	setup_processor();
+	setup_arch_memory();
+
+	/* copy flat DT out of .init and then unflatten it */
+	unflatten_and_copy_device_tree();
+
+	/* Can be issue if someone passes cmd line arg "ro"
+	 * But that is unlikely so keeping it as it is
+	 */
+	root_mountflags &= ~MS_RDONLY;
+
+	arc_unwind_init();
+}
+
+/*
+ * Called from start_kernel() - boot CPU only
+ */
+void __init time_init(void)
+{
+	of_clk_init(NULL);
+	timer_probe();
+}
+
+static int __init customize_machine(void)
+{
+	if (machine_desc->init_machine)
+		machine_desc->init_machine();
+
+	return 0;
+}
+arch_initcall(customize_machine);
+
+static int __init init_late_machine(void)
+{
+	if (machine_desc->init_late)
+		machine_desc->init_late();
+
+	return 0;
+}
+late_initcall(init_late_machine);
+/*
+ *  Get CPU information for use by the procfs.
+ */
+
+#define cpu_to_ptr(c)	((void *)(0xFFFF0000 | (unsigned int)(c)))
+#define ptr_to_cpu(p)	(~0xFFFF0000UL & (unsigned int)(p))
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	char *str;
+	int cpu_id = ptr_to_cpu(v);
+	struct device *cpu_dev = get_cpu_device(cpu_id);
+	struct clk *cpu_clk;
+	unsigned long freq = 0;
+
+	if (!cpu_online(cpu_id)) {
+		seq_printf(m, "processor [%d]\t: Offline\n", cpu_id);
+		goto done;
+	}
+
+	str = (char *)__get_free_page(GFP_KERNEL);
+	if (!str)
+		goto done;
+
+	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
+
+	cpu_clk = clk_get(cpu_dev, NULL);
+	if (IS_ERR(cpu_clk)) {
+		seq_printf(m, "CPU speed \t: Cannot get clock for processor [%d]\n",
+			   cpu_id);
+	} else {
+		freq = clk_get_rate(cpu_clk);
+	}
+	if (freq)
+		seq_printf(m, "CPU speed\t: %lu.%02lu Mhz\n",
+			   freq / 1000000, (freq / 10000) % 100);
+
+	seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n",
+		   loops_per_jiffy / (500000 / HZ),
+		   (loops_per_jiffy / (5000 / HZ)) % 100);
+
+	seq_printf(m, arc_mmu_mumbojumbo(cpu_id, str, PAGE_SIZE));
+	seq_printf(m, arc_cache_mumbojumbo(cpu_id, str, PAGE_SIZE));
+	seq_printf(m, arc_extn_mumbojumbo(cpu_id, str, PAGE_SIZE));
+	seq_printf(m, arc_platform_smp_cpuinfo());
+
+	free_page((unsigned long)str);
+done:
+	seq_printf(m, "\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	/*
+	 * Callback returns cpu-id to iterator for show routine, NULL to stop.
+	 * However since NULL is also a valid cpu-id (0), we use a round-about
+	 * way to pass it w/o having to kmalloc/free a 2 byte string.
+	 * Encode cpu-id as 0xFFcccc, which is decoded by show routine.
+	 */
+	return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo
+};
+
+static DEFINE_PER_CPU(struct cpu, cpu_topology);
+
+static int __init topology_init(void)
+{
+	int cpu;
+
+	for_each_present_cpu(cpu)
+	    register_cpu(&per_cpu(cpu_topology, cpu), cpu);
+
+	return 0;
+}
+
+subsys_initcall(topology_init);
diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
new file mode 100644
index 000000000..723abcb10
--- /dev/null
+++ b/arch/arc/kernel/signal.c
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Signal Handling for ARC
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * vineetg: Jan 2010 (Restarting of timer related syscalls)
+ *
+ * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK)
+ *  -do_signal() supports TIF_RESTORE_SIGMASK
+ *  -do_signal() no loner needs oldset, required by OLD sys_sigsuspend
+ *  -sys_rt_sigsuspend() now comes from generic code, so discard arch implemen
+ *  -sys_sigsuspend() no longer needs to fudge ptregs, hence that arg removed
+ *  -sys_sigsuspend() no longer loops for do_signal(), sets TIF_xxx and leaves
+ *   the job to do_signal()
+ *
+ * vineetg: July 2009
+ *  -Modified Code to support the uClibc provided userland sigreturn stub
+ *   to avoid kernel synthesing it on user stack at runtime, costing TLB
+ *   probes and Cache line flushes.
+ *
+ * vineetg: July 2009
+ *  -In stash_usr_regs( ) and restore_usr_regs( ), save/restore of user regs
+ *   in done in block copy rather than one word at a time.
+ *   This saves around 2K of code and improves LMBench lat_sig <catch>
+ *
+ * rajeshwarr: Feb 2009
+ *  - Support for Realtime Signals
+ *
+ * vineetg: Aug 11th 2008: Bug #94183
+ *  -ViXS were still seeing crashes when using insmod to load drivers.
+ *   It turned out that the code to change Execute permssions for TLB entries
+ *   of user was not guarded for interrupts (mod_tlb_permission)
+ *   This was causing TLB entries to be overwritten on unrelated indexes
+ *
+ * Vineetg: July 15th 2008: Bug #94183
+ *  -Exception happens in Delay slot of a JMP, and before user space resumes,
+ *   Signal is delivered (Ctrl + C) = >SIGINT.
+ *   setup_frame( ) sets up PC,SP,BLINK to enable user space signal handler
+ *   to run, but doesn't clear the Delay slot bit from status32. As a result,
+ *   on resuming user mode, signal handler branches off to BTA of orig JMP
+ *  -FIX: clear the DE bit from status32 in setup_frame( )
+ *
+ * Rahul Trivedi, Kanika Nema: Codito Technologies 2004
+ */
+
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+#include <linux/personality.h>
+#include <linux/uaccess.h>
+#include <linux/syscalls.h>
+#include <linux/resume_user_mode.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/ucontext.h>
+
+struct rt_sigframe {
+	struct siginfo info;
+	struct ucontext uc;
+#define MAGIC_SIGALTSTK		0x07302004
+	unsigned int sigret_magic;
+};
+
+static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	v2abi.r30 = regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	v2abi.r58 = regs->r58;
+	v2abi.r59 = regs->r59;
+#else
+	v2abi.r58 = v2abi.r59 = 0;
+#endif
+	err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi));
+#endif
+	return err;
+}
+
+static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	err = __copy_from_user(&v2abi, &mctx->v2abi, sizeof(v2abi));
+
+	regs->r30 = v2abi.r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	regs->r58 = v2abi.r58;
+	regs->r59 = v2abi.r59;
+#endif
+#endif
+	return err;
+}
+
+static int
+stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
+	       sigset_t *set)
+{
+	int err;
+	struct user_regs_struct uregs;
+
+	uregs.scratch.bta	= regs->bta;
+	uregs.scratch.lp_start	= regs->lp_start;
+	uregs.scratch.lp_end	= regs->lp_end;
+	uregs.scratch.lp_count	= regs->lp_count;
+	uregs.scratch.status32	= regs->status32;
+	uregs.scratch.ret	= regs->ret;
+	uregs.scratch.blink	= regs->blink;
+	uregs.scratch.fp	= regs->fp;
+	uregs.scratch.gp	= regs->r26;
+	uregs.scratch.r12	= regs->r12;
+	uregs.scratch.r11	= regs->r11;
+	uregs.scratch.r10	= regs->r10;
+	uregs.scratch.r9	= regs->r9;
+	uregs.scratch.r8	= regs->r8;
+	uregs.scratch.r7	= regs->r7;
+	uregs.scratch.r6	= regs->r6;
+	uregs.scratch.r5	= regs->r5;
+	uregs.scratch.r4	= regs->r4;
+	uregs.scratch.r3	= regs->r3;
+	uregs.scratch.r2	= regs->r2;
+	uregs.scratch.r1	= regs->r1;
+	uregs.scratch.r0	= regs->r0;
+	uregs.scratch.sp	= regs->sp;
+
+	err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), &uregs.scratch,
+			     sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= save_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
+	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
+{
+	sigset_t set;
+	int err;
+	struct user_regs_struct uregs;
+
+	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
+	err |= __copy_from_user(&uregs.scratch,
+				&(sf->uc.uc_mcontext.regs.scratch),
+				sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= restore_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
+	if (err)
+		return -EFAULT;
+
+	set_current_blocked(&set);
+	regs->bta	= uregs.scratch.bta;
+	regs->lp_start	= uregs.scratch.lp_start;
+	regs->lp_end	= uregs.scratch.lp_end;
+	regs->lp_count	= uregs.scratch.lp_count;
+	regs->status32	= uregs.scratch.status32;
+	regs->ret	= uregs.scratch.ret;
+	regs->blink	= uregs.scratch.blink;
+	regs->fp	= uregs.scratch.fp;
+	regs->r26	= uregs.scratch.gp;
+	regs->r12	= uregs.scratch.r12;
+	regs->r11	= uregs.scratch.r11;
+	regs->r10	= uregs.scratch.r10;
+	regs->r9	= uregs.scratch.r9;
+	regs->r8	= uregs.scratch.r8;
+	regs->r7	= uregs.scratch.r7;
+	regs->r6	= uregs.scratch.r6;
+	regs->r5	= uregs.scratch.r5;
+	regs->r4	= uregs.scratch.r4;
+	regs->r3	= uregs.scratch.r3;
+	regs->r2	= uregs.scratch.r2;
+	regs->r1	= uregs.scratch.r1;
+	regs->r0	= uregs.scratch.r0;
+	regs->sp	= uregs.scratch.sp;
+
+	return 0;
+}
+
+static inline int is_do_ss_needed(unsigned int magic)
+{
+	if (MAGIC_SIGALTSTK == magic)
+		return 1;
+	else
+		return 0;
+}
+
+SYSCALL_DEFINE0(rt_sigreturn)
+{
+	struct rt_sigframe __user *sf;
+	unsigned int magic;
+	struct pt_regs *regs = current_pt_regs();
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	/* Since we stacked the signal on a word boundary,
+	 * then 'sp' should be word aligned here.  If it's
+	 * not, then the user is trying to mess with us.
+	 */
+	if (regs->sp & 3)
+		goto badframe;
+
+	sf = (struct rt_sigframe __force __user *)(regs->sp);
+
+	if (!access_ok(sf, sizeof(*sf)))
+		goto badframe;
+
+	if (__get_user(magic, &sf->sigret_magic))
+		goto badframe;
+
+	if (unlikely(is_do_ss_needed(magic)))
+		if (restore_altstack(&sf->uc.uc_stack))
+			goto badframe;
+
+	if (restore_usr_regs(regs, sf))
+		goto badframe;
+
+	/* Don't restart from sigreturn */
+	syscall_wont_restart(regs);
+
+	/*
+	 * Ensure that sigreturn always returns to user mode (in case the
+	 * regs saved on user stack got fudged between save and sigreturn)
+	 * Otherwise it is easy to panic the kernel with a custom
+	 * signal handler and/or restorer which clobberes the status32/ret
+	 * to return to a bogus location in kernel mode.
+	 */
+	regs->status32 |= STATUS_U_MASK;
+
+	return regs->r0;
+
+badframe:
+	force_sig(SIGSEGV);
+	return 0;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *get_sigframe(struct ksignal *ksig,
+					struct pt_regs *regs,
+					unsigned long framesize)
+{
+	unsigned long sp = sigsp(regs->sp, ksig);
+	void __user *frame;
+
+	/* No matter what happens, 'sp' must be word
+	 * aligned otherwise nasty things could happen
+	 */
+
+	/* ATPCS B01 mandates 8-byte alignment */
+	frame = (void __user *)((sp - framesize) & ~7);
+
+	/* Check that we can actually write to the signal frame */
+	if (!access_ok(frame, framesize))
+		frame = NULL;
+
+	return frame;
+}
+
+static int
+setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
+{
+	struct rt_sigframe __user *sf;
+	unsigned int magic = 0;
+	int err = 0;
+
+	sf = get_sigframe(ksig, regs, sizeof(struct rt_sigframe));
+	if (!sf)
+		return 1;
+
+	/*
+	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
+	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
+	 * during signal handler execution. This works for SA_SIGINFO as well
+	 * although the semantics are now overloaded (the same reg state can be
+	 * inspected by userland: but are they allowed to fiddle with it ?
+	 */
+	err |= stash_usr_regs(sf, regs, set);
+
+	/*
+	 * SA_SIGINFO requires 3 args to signal handler:
+	 *  #1: sig-no (common to any handler)
+	 *  #2: struct siginfo
+	 *  #3: struct ucontext (completely populated)
+	 */
+	if (unlikely(ksig->ka.sa.sa_flags & SA_SIGINFO)) {
+		err |= copy_siginfo_to_user(&sf->info, &ksig->info);
+		err |= __put_user(0, &sf->uc.uc_flags);
+		err |= __put_user(NULL, &sf->uc.uc_link);
+		err |= __save_altstack(&sf->uc.uc_stack, regs->sp);
+
+		/* setup args 2 and 3 for user mode handler */
+		regs->r1 = (unsigned long)&sf->info;
+		regs->r2 = (unsigned long)&sf->uc;
+
+		/*
+		 * small optim to avoid unconditionally calling do_sigaltstack
+		 * in sigreturn path, now that we only have rt_sigreturn
+		 */
+		magic = MAGIC_SIGALTSTK;
+	}
+
+	err |= __put_user(magic, &sf->sigret_magic);
+	if (err)
+		return err;
+
+	/* #1 arg to the user Signal handler */
+	regs->r0 = ksig->sig;
+
+	/* setup PC of user space signal handler */
+	regs->ret = (unsigned long)ksig->ka.sa.sa_handler;
+
+	/*
+	 * handler returns using sigreturn stub provided already by userspace
+	 * If not, nuke the process right away
+	 */
+	if(!(ksig->ka.sa.sa_flags & SA_RESTORER))
+		return 1;
+
+	regs->blink = (unsigned long)ksig->ka.sa.sa_restorer;
+
+	/* User Stack for signal handler will be above the frame just carved */
+	regs->sp = (unsigned long)sf;
+
+	/*
+	 * Bug 94183, Clear the DE bit, so that when signal handler
+	 * starts to run, it doesn't use BTA
+	 */
+	regs->status32 &= ~STATUS_DE_MASK;
+	regs->status32 |= STATUS_L_MASK;
+
+	return err;
+}
+
+static void arc_restart_syscall(struct k_sigaction *ka, struct pt_regs *regs)
+{
+	switch (regs->r0) {
+	case -ERESTART_RESTARTBLOCK:
+	case -ERESTARTNOHAND:
+		/*
+		 * ERESTARTNOHAND means that the syscall should
+		 * only be restarted if there was no handler for
+		 * the signal, and since we only get here if there
+		 * is a handler, we don't restart
+		 */
+		regs->r0 = -EINTR;   /* ERESTART_xxx is internal */
+		break;
+
+	case -ERESTARTSYS:
+		/*
+		 * ERESTARTSYS means to restart the syscall if
+		 * there is no handler or the handler was
+		 * registered with SA_RESTART
+		 */
+		if (!(ka->sa.sa_flags & SA_RESTART)) {
+			regs->r0 = -EINTR;
+			break;
+		}
+		fallthrough;
+
+	case -ERESTARTNOINTR:
+		/*
+		 * ERESTARTNOINTR means that the syscall should
+		 * be called again after the signal handler returns.
+		 * Setup reg state just as it was before doing the trap
+		 * r0 has been clobbered with sys call ret code thus it
+		 * needs to be reloaded with orig first arg to syscall
+		 * in orig_r0. Rest of relevant reg-file:
+		 * r8 (syscall num) and (r1 - r7) will be reset to
+		 * their orig user space value when we ret from kernel
+		 */
+		regs->r0 = regs->orig_r0;
+		regs->ret -= is_isa_arcv2() ? 2 : 4;
+		break;
+	}
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void
+handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+	sigset_t *oldset = sigmask_to_save();
+	int failed;
+
+	/* Set up the stack frame */
+	failed = setup_rt_frame(ksig, oldset, regs);
+
+	signal_setup_done(failed, ksig, 0);
+}
+
+void do_signal(struct pt_regs *regs)
+{
+	struct ksignal ksig;
+	int restart_scall;
+
+	restart_scall = in_syscall(regs) && syscall_restartable(regs);
+
+	if (test_thread_flag(TIF_SIGPENDING) && get_signal(&ksig)) {
+		if (restart_scall) {
+			arc_restart_syscall(&ksig.ka, regs);
+			syscall_wont_restart(regs);	/* No more restarts */
+		}
+		handle_signal(&ksig, regs);
+		return;
+	}
+
+	if (restart_scall) {
+		/* No handler for syscall: restart it */
+		if (regs->r0 == -ERESTARTNOHAND ||
+		    regs->r0 == -ERESTARTSYS || regs->r0 == -ERESTARTNOINTR) {
+			regs->r0 = regs->orig_r0;
+			regs->ret -= is_isa_arcv2() ? 2 : 4;
+		} else if (regs->r0 == -ERESTART_RESTARTBLOCK) {
+			regs->r8 = __NR_restart_syscall;
+			regs->ret -= is_isa_arcv2() ? 2 : 4;
+		}
+		syscall_wont_restart(regs);	/* No more restarts */
+	}
+
+	/* If there's no signal to deliver, restore the saved sigmask back */
+	restore_saved_sigmask();
+}
+
+void do_notify_resume(struct pt_regs *regs)
+{
+	/*
+	 * ASM glue guarantees that this is only called when returning to
+	 * user mode
+	 */
+	if (test_thread_flag(TIF_NOTIFY_RESUME))
+		resume_user_mode_work(regs);
+}
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
new file mode 100644
index 000000000..ad93fe6e4
--- /dev/null
+++ b/arch/arc/kernel/smp.c
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * RajeshwarR: Dec 11, 2007
+ *   -- Added support for Inter Processor Interrupts
+ *
+ * Vineetg: Nov 1st, 2007
+ *    -- Initial Write (Borrowed heavily from ARM)
+ */
+
+#include <linux/spinlock.h>
+#include <linux/sched/mm.h>
+#include <linux/interrupt.h>
+#include <linux/profile.h>
+#include <linux/mm.h>
+#include <linux/cpu.h>
+#include <linux/irq.h>
+#include <linux/atomic.h>
+#include <linux/cpumask.h>
+#include <linux/reboot.h>
+#include <linux/irqdomain.h>
+#include <linux/export.h>
+#include <linux/of_fdt.h>
+
+#include <asm/processor.h>
+#include <asm/setup.h>
+#include <asm/mach_desc.h>
+
+#ifndef CONFIG_ARC_HAS_LLSC
+arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+EXPORT_SYMBOL_GPL(smp_atomic_ops_lock);
+#endif
+
+struct plat_smp_ops  __weak plat_smp_ops;
+
+/* XXX: per cpu ? Only needed once in early secondary boot */
+struct task_struct *secondary_idle_tsk;
+
+/* Called from start_kernel */
+void __init smp_prepare_boot_cpu(void)
+{
+}
+
+static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
+{
+	unsigned long dt_root = of_get_flat_dt_root();
+	const char *buf;
+
+	buf = of_get_flat_dt_prop(dt_root, name, NULL);
+	if (!buf)
+		return -EINVAL;
+
+	if (cpulist_parse(buf, cpumask))
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Read from DeviceTree and setup cpu possible mask. If there is no
+ * "possible-cpus" property in DeviceTree pretend all [0..NR_CPUS-1] exist.
+ */
+static void __init arc_init_cpu_possible(void)
+{
+	struct cpumask cpumask;
+
+	if (arc_get_cpu_map("possible-cpus", &cpumask)) {
+		pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n",
+			NR_CPUS);
+
+		cpumask_setall(&cpumask);
+	}
+
+	if (!cpumask_test_cpu(0, &cpumask))
+		panic("Master cpu (cpu[0]) is missed in cpu possible mask!");
+
+	init_cpu_possible(&cpumask);
+}
+
+/*
+ * Called from setup_arch() before calling setup_processor()
+ *
+ * - Initialise the CPU possible map early - this describes the CPUs
+ *   which may be present or become present in the system.
+ * - Call early smp init hook. This can initialize a specific multi-core
+ *   IP which is say common to several platforms (hence not part of
+ *   platform specific int_early() hook)
+ */
+void __init smp_init_cpus(void)
+{
+	arc_init_cpu_possible();
+
+	if (plat_smp_ops.init_early_smp)
+		plat_smp_ops.init_early_smp();
+}
+
+/* called from init ( ) =>  process 1 */
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	/*
+	 * if platform didn't set the present map already, do it now
+	 * boot cpu is set to present already by init/main.c
+	 */
+	if (num_present_cpus() <= 1)
+		init_cpu_present(cpu_possible_mask);
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+
+}
+
+/*
+ * Default smp boot helper for Run-on-reset case where all cores start off
+ * together. Non-masters need to wait for Master to start running.
+ * This is implemented using a flag in memory, which Non-masters spin-wait on.
+ * Master sets it to cpu-id of core to "ungate" it.
+ */
+static volatile int wake_flag;
+
+#ifdef CONFIG_ISA_ARCOMPACT
+
+#define __boot_read(f)		f
+#define __boot_write(f, v)	f = v
+
+#else
+
+#define __boot_read(f)		arc_read_uncached_32(&f)
+#define __boot_write(f, v)	arc_write_uncached_32(&f, v)
+
+#endif
+
+static void arc_default_smp_cpu_kick(int cpu, unsigned long pc)
+{
+	BUG_ON(cpu == 0);
+
+	__boot_write(wake_flag, cpu);
+}
+
+void arc_platform_smp_wait_to_boot(int cpu)
+{
+	/* for halt-on-reset, we've waited already */
+	if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET))
+		return;
+
+	while (__boot_read(wake_flag) != cpu)
+		;
+
+	__boot_write(wake_flag, 0);
+}
+
+const char *arc_platform_smp_cpuinfo(void)
+{
+	return plat_smp_ops.info ? : "";
+}
+
+/*
+ * The very first "C" code executed by secondary
+ * Called from asm stub in head.S
+ * "current"/R25 already setup by low level boot code
+ */
+void start_kernel_secondary(void)
+{
+	struct mm_struct *mm = &init_mm;
+	unsigned int cpu = smp_processor_id();
+
+	/* MMU, Caches, Vector Table, Interrupts etc */
+	setup_processor();
+
+	mmget(mm);
+	mmgrab(mm);
+	current->active_mm = mm;
+	cpumask_set_cpu(cpu, mm_cpumask(mm));
+
+	/* Some SMP H/w setup - for each cpu */
+	if (plat_smp_ops.init_per_cpu)
+		plat_smp_ops.init_per_cpu(cpu);
+
+	if (machine_desc->init_per_cpu)
+		machine_desc->init_per_cpu(cpu);
+
+	notify_cpu_starting(cpu);
+	set_cpu_online(cpu, true);
+
+	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
+
+	local_irq_enable();
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+}
+
+/*
+ * Called from kernel_init( ) -> smp_init( ) - for each CPU
+ *
+ * At this point, Secondary Processor  is "HALT"ed:
+ *  -It booted, but was halted in head.S
+ *  -It was configured to halt-on-reset
+ *  So need to wake it up.
+ *
+ * Essential requirements being where to run from (PC) and stack (SP)
+*/
+int __cpu_up(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long wait_till;
+
+	secondary_idle_tsk = idle;
+
+	pr_info("Idle Task [%d] %p", cpu, idle);
+	pr_info("Trying to bring up CPU%u ...\n", cpu);
+
+	if (plat_smp_ops.cpu_kick)
+		plat_smp_ops.cpu_kick(cpu,
+				(unsigned long)first_lines_of_secondary);
+	else
+		arc_default_smp_cpu_kick(cpu, (unsigned long)NULL);
+
+	/* wait for 1 sec after kicking the secondary */
+	wait_till = jiffies + HZ;
+	while (time_before(jiffies, wait_till)) {
+		if (cpu_online(cpu))
+			break;
+	}
+
+	if (!cpu_online(cpu)) {
+		pr_info("Timeout: CPU%u FAILED to come up !!!\n", cpu);
+		return -1;
+	}
+
+	secondary_idle_tsk = NULL;
+
+	return 0;
+}
+
+/*****************************************************************************/
+/*              Inter Processor Interrupt Handling                           */
+/*****************************************************************************/
+
+enum ipi_msg_type {
+	IPI_EMPTY = 0,
+	IPI_RESCHEDULE = 1,
+	IPI_CALL_FUNC,
+	IPI_CPU_STOP,
+};
+
+/*
+ * In arches with IRQ for each msg type (above), receiver can use IRQ-id  to
+ * figure out what msg was sent. For those which don't (ARC has dedicated IPI
+ * IRQ), the msg-type needs to be conveyed via per-cpu data
+ */
+
+static DEFINE_PER_CPU(unsigned long, ipi_data);
+
+static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg)
+{
+	unsigned long __percpu *ipi_data_ptr = per_cpu_ptr(&ipi_data, cpu);
+	unsigned long old, new;
+	unsigned long flags;
+
+	pr_debug("%d Sending msg [%d] to %d\n", smp_processor_id(), msg, cpu);
+
+	local_irq_save(flags);
+
+	/*
+	 * Atomically write new msg bit (in case others are writing too),
+	 * and read back old value
+	 */
+	do {
+		new = old = *ipi_data_ptr;
+		new |= 1U << msg;
+	} while (cmpxchg(ipi_data_ptr, old, new) != old);
+
+	/*
+	 * Call the platform specific IPI kick function, but avoid if possible:
+	 * Only do so if there's no pending msg from other concurrent sender(s).
+	 * Otherwise, receiver will see this msg as well when it takes the
+	 * IPI corresponding to that msg. This is true, even if it is already in
+	 * IPI handler, because !@old means it has not yet dequeued the msg(s)
+	 * so @new msg can be a free-loader
+	 */
+	if (plat_smp_ops.ipi_send && !old)
+		plat_smp_ops.ipi_send(cpu);
+
+	local_irq_restore(flags);
+}
+
+static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg)
+{
+	unsigned int cpu;
+
+	for_each_cpu(cpu, callmap)
+		ipi_send_msg_one(cpu, msg);
+}
+
+void smp_send_reschedule(int cpu)
+{
+	ipi_send_msg_one(cpu, IPI_RESCHEDULE);
+}
+
+void smp_send_stop(void)
+{
+	struct cpumask targets;
+	cpumask_copy(&targets, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &targets);
+	ipi_send_msg(&targets, IPI_CPU_STOP);
+}
+
+void arch_send_call_function_single_ipi(int cpu)
+{
+	ipi_send_msg_one(cpu, IPI_CALL_FUNC);
+}
+
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	ipi_send_msg(mask, IPI_CALL_FUNC);
+}
+
+/*
+ * ipi_cpu_stop - handle IPI from smp_send_stop()
+ */
+static void ipi_cpu_stop(void)
+{
+	machine_halt();
+}
+
+static inline int __do_IPI(unsigned long msg)
+{
+	int rc = 0;
+
+	switch (msg) {
+	case IPI_RESCHEDULE:
+		scheduler_ipi();
+		break;
+
+	case IPI_CALL_FUNC:
+		generic_smp_call_function_interrupt();
+		break;
+
+	case IPI_CPU_STOP:
+		ipi_cpu_stop();
+		break;
+
+	default:
+		rc = 1;
+	}
+
+	return rc;
+}
+
+/*
+ * arch-common ISR to handle for inter-processor interrupts
+ * Has hooks for platform specific IPI
+ */
+irqreturn_t do_IPI(int irq, void *dev_id)
+{
+	unsigned long pending;
+	unsigned long __maybe_unused copy;
+
+	pr_debug("IPI [%ld] received on cpu %d\n",
+		 *this_cpu_ptr(&ipi_data), smp_processor_id());
+
+	if (plat_smp_ops.ipi_clear)
+		plat_smp_ops.ipi_clear(irq);
+
+	/*
+	 * "dequeue" the msg corresponding to this IPI (and possibly other
+	 * piggybacked msg from elided IPIs: see ipi_send_msg_one() above)
+	 */
+	copy = pending = xchg(this_cpu_ptr(&ipi_data), 0);
+
+	do {
+		unsigned long msg = __ffs(pending);
+		int rc;
+
+		rc = __do_IPI(msg);
+		if (rc)
+			pr_info("IPI with bogus msg %ld in %ld\n", msg, copy);
+		pending &= ~(1U << msg);
+	} while (pending);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * API called by platform code to hookup arch-common ISR to their IPI IRQ
+ *
+ * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map
+ * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise
+ * request_percpu_irq() below will fail
+ */
+static DEFINE_PER_CPU(int, ipi_dev);
+
+int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq)
+{
+	int *dev = per_cpu_ptr(&ipi_dev, cpu);
+	unsigned int virq = irq_find_mapping(NULL, hwirq);
+
+	if (!virq)
+		panic("Cannot find virq for root domain and hwirq=%lu", hwirq);
+
+	/* Boot cpu calls request, all call enable */
+	if (!cpu) {
+		int rc;
+
+		rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev);
+		if (rc)
+			panic("Percpu IRQ request failed for %u\n", virq);
+	}
+
+	enable_percpu_irq(virq, 0);
+
+	return 0;
+}
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
new file mode 100644
index 000000000..5372dc04e
--- /dev/null
+++ b/arch/arc/kernel/stacktrace.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *	stacktrace.c : stacktracing APIs needed by rest of kernel
+ *			(wrappers over ARC dwarf based unwinder)
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ *  vineetg: aug 2009
+ *  -Implemented CONFIG_STACKTRACE APIs, primarily save_stack_trace_tsk( )
+ *   for displaying task's kernel mode call stack in /proc/<pid>/stack
+ *  -Iterator based approach to have single copy of unwinding core and APIs
+ *   needing unwinding, implement the logic in iterator regarding:
+ *      = which frame onwards to start capture
+ *      = which frame to stop capturing (wchan)
+ *      = specifics of data structs where trace is saved(CONFIG_STACKTRACE etc)
+ *
+ *  vineetg: March 2009
+ *  -Implemented correct versions of thread_saved_pc() and __get_wchan()
+ *
+ *  rajeshwarr: 2008
+ *  -Initial implementation
+ */
+
+#include <linux/ptrace.h>
+#include <linux/export.h>
+#include <linux/stacktrace.h>
+#include <linux/kallsyms.h>
+#include <linux/sched/debug.h>
+
+#include <asm/arcregs.h>
+#include <asm/unwind.h>
+#include <asm/switch_to.h>
+
+/*-------------------------------------------------------------------------
+ *              Unwinder Iterator
+ *-------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_ARC_DW2_UNWIND
+
+static int
+seed_unwind_frame_info(struct task_struct *tsk, struct pt_regs *regs,
+		       struct unwind_frame_info *frame_info)
+{
+	if (regs) {
+		/*
+		 * Asynchronous unwinding of intr/exception
+		 *  - Just uses the pt_regs passed
+		 */
+		frame_info->task = tsk;
+
+		frame_info->regs.r27 = regs->fp;
+		frame_info->regs.r28 = regs->sp;
+		frame_info->regs.r31 = regs->blink;
+		frame_info->regs.r63 = regs->ret;
+		frame_info->call_frame = 0;
+	} else if (tsk == NULL || tsk == current) {
+		/*
+		 * synchronous unwinding (e.g. dump_stack)
+		 *  - uses current values of SP and friends
+		 */
+		unsigned long fp, sp, blink, ret;
+		frame_info->task = current;
+
+		__asm__ __volatile__(
+			"mov %0,r27\n\t"
+			"mov %1,r28\n\t"
+			"mov %2,r31\n\t"
+			"mov %3,r63\n\t"
+			: "=r"(fp), "=r"(sp), "=r"(blink), "=r"(ret)
+		);
+
+		frame_info->regs.r27 = fp;
+		frame_info->regs.r28 = sp;
+		frame_info->regs.r31 = blink;
+		frame_info->regs.r63 = ret;
+		frame_info->call_frame = 0;
+	} else {
+		/*
+		 * Asynchronous unwinding of a likely sleeping task
+		 *  - first ensure it is actually sleeping
+		 *  - if so, it will be in __switch_to, kernel mode SP of task
+		 *    is safe-kept and BLINK at a well known location in there
+		 */
+
+		if (task_is_running(tsk))
+			return -1;
+
+		frame_info->task = tsk;
+
+		frame_info->regs.r27 = TSK_K_FP(tsk);
+		frame_info->regs.r28 = TSK_K_ESP(tsk);
+		frame_info->regs.r31 = TSK_K_BLINK(tsk);
+		frame_info->regs.r63 = (unsigned int)__switch_to;
+
+		/* In the prologue of __switch_to, first FP is saved on stack
+		 * and then SP is copied to FP. Dwarf assumes cfa as FP based
+		 * but we didn't save FP. The value retrieved above is FP's
+		 * state in previous frame.
+		 * As a work around for this, we unwind from __switch_to start
+		 * and adjust SP accordingly. The other limitation is that
+		 * __switch_to macro is dwarf rules are not generated for inline
+		 * assembly code
+		 */
+		frame_info->regs.r27 = 0;
+		frame_info->regs.r28 += 60;
+		frame_info->call_frame = 0;
+
+	}
+	return 0;
+}
+
+#endif
+
+notrace noinline unsigned int
+arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
+		int (*consumer_fn) (unsigned int, void *), void *arg)
+{
+#ifdef CONFIG_ARC_DW2_UNWIND
+	int ret = 0, cnt = 0;
+	unsigned int address;
+	struct unwind_frame_info frame_info;
+
+	if (seed_unwind_frame_info(tsk, regs, &frame_info))
+		return 0;
+
+	while (1) {
+		address = UNW_PC(&frame_info);
+
+		if (!address || !__kernel_text_address(address))
+			break;
+
+		if (consumer_fn(address, arg) == -1)
+			break;
+
+		ret = arc_unwind(&frame_info);
+		if (ret)
+			break;
+
+		frame_info.regs.r63 = frame_info.regs.r31;
+
+		if (cnt++ > 128) {
+			printk("unwinder looping too long, aborting !\n");
+			return 0;
+		}
+	}
+
+	return address;		/* return the last address it saw */
+#else
+	/* On ARC, only Dward based unwinder works. fp based backtracing is
+	 * not possible (-fno-omit-frame-pointer) because of the way function
+	 * prologue is setup (callee regs saved and then fp set and not other
+	 * way around
+	 */
+	pr_warn_once("CONFIG_ARC_DW2_UNWIND needs to be enabled\n");
+	return 0;
+
+#endif
+}
+
+/*-------------------------------------------------------------------------
+ * callbacks called by unwinder iterator to implement kernel APIs
+ *
+ * The callback can return -1 to force the iterator to stop, which by default
+ * keeps going till the bottom-most frame.
+ *-------------------------------------------------------------------------
+ */
+
+/* Call-back which plugs into unwinding core to dump the stack in
+ * case of panic/OOPs/BUG etc
+ */
+static int __print_sym(unsigned int address, void *arg)
+{
+	const char *loglvl = arg;
+
+	printk("%s  %pS\n", loglvl, (void *)address);
+	return 0;
+}
+
+#ifdef CONFIG_STACKTRACE
+
+/* Call-back which plugs into unwinding core to capture the
+ * traces needed by kernel on /proc/<pid>/stack
+ */
+static int __collect_all(unsigned int address, void *arg)
+{
+	struct stack_trace *trace = arg;
+
+	if (trace->skip > 0)
+		trace->skip--;
+	else
+		trace->entries[trace->nr_entries++] = address;
+
+	if (trace->nr_entries >= trace->max_entries)
+		return -1;
+
+	return 0;
+}
+
+static int __collect_all_but_sched(unsigned int address, void *arg)
+{
+	struct stack_trace *trace = arg;
+
+	if (in_sched_functions(address))
+		return 0;
+
+	if (trace->skip > 0)
+		trace->skip--;
+	else
+		trace->entries[trace->nr_entries++] = address;
+
+	if (trace->nr_entries >= trace->max_entries)
+		return -1;
+
+	return 0;
+}
+
+#endif
+
+static int __get_first_nonsched(unsigned int address, void *unused)
+{
+	if (in_sched_functions(address))
+		return 0;
+
+	return -1;
+}
+
+/*-------------------------------------------------------------------------
+ *              APIs expected by various kernel sub-systems
+ *-------------------------------------------------------------------------
+ */
+
+noinline void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs,
+			      const char *loglvl)
+{
+	printk("%s\nStack Trace:\n", loglvl);
+	arc_unwind_core(tsk, regs, __print_sym, (void *)loglvl);
+}
+EXPORT_SYMBOL(show_stacktrace);
+
+/* Expected by sched Code */
+void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
+{
+	show_stacktrace(tsk, NULL, loglvl);
+}
+
+/* Another API expected by schedular, shows up in "ps" as Wait Channel
+ * Of course just returning schedule( ) would be pointless so unwind until
+ * the function is not in schedular code
+ */
+unsigned int __get_wchan(struct task_struct *tsk)
+{
+	return arc_unwind_core(tsk, NULL, __get_first_nonsched, NULL);
+}
+
+#ifdef CONFIG_STACKTRACE
+
+/*
+ * API required by CONFIG_STACKTRACE, CONFIG_LATENCYTOP.
+ * A typical use is when /proc/<pid>/stack is queried by userland
+ */
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	/* Assumes @tsk is sleeping so unwinds from __switch_to */
+	arc_unwind_core(tsk, NULL, __collect_all_but_sched, trace);
+}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	/* Pass NULL for task so it unwinds the current call frame */
+	arc_unwind_core(NULL, NULL, __collect_all, trace);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+#endif
diff --git a/arch/arc/kernel/sys.c b/arch/arc/kernel/sys.c
new file mode 100644
index 000000000..1069446bd
--- /dev/null
+++ b/arch/arc/kernel/sys.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+
+#include <asm/syscalls.h>
+
+#define sys_clone	sys_clone_wrapper
+#define sys_clone3	sys_clone3_wrapper
+
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+void *sys_call_table[NR_syscalls] = {
+	[0 ... NR_syscalls-1] = sys_ni_syscall,
+#include <asm/unistd.h>
+};
diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c
new file mode 100644
index 000000000..6b83e3f2b
--- /dev/null
+++ b/arch/arc/kernel/traps.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Traps/Non-MMU Exception handling for ARC
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * vineetg: May 2011
+ *  -user-space unaligned access emulation
+ *
+ * Rahul Trivedi: Codito Technologies 2004
+ */
+
+#include <linux/sched/signal.h>
+#include <linux/kdebug.h>
+#include <linux/uaccess.h>
+#include <linux/ptrace.h>
+#include <linux/kprobes.h>
+#include <linux/kgdb.h>
+#include <asm/setup.h>
+#include <asm/unaligned.h>
+#include <asm/kprobes.h>
+
+void die(const char *str, struct pt_regs *regs, unsigned long address)
+{
+	show_kernel_fault_diag(str, regs, address);
+
+	/* DEAD END */
+	__asm__("flag 1");
+}
+
+/*
+ * Helper called for bulk of exceptions NOT needing specific handling
+ *  -for user faults enqueues requested signal
+ *  -for kernel, chk if due to copy_(to|from)_user, otherwise die()
+ */
+static noinline int
+unhandled_exception(const char *str, struct pt_regs *regs,
+		    int signo, int si_code, void __user *addr)
+{
+	if (user_mode(regs)) {
+		struct task_struct *tsk = current;
+
+		tsk->thread.fault_address = (__force unsigned int)addr;
+
+		force_sig_fault(signo, si_code, addr);
+
+	} else {
+		/* If not due to copy_(to|from)_user, we are doomed */
+		if (fixup_exception(regs))
+			return 0;
+
+		die(str, regs, (unsigned long)addr);
+	}
+
+	return 1;
+}
+
+#define DO_ERROR_INFO(signr, str, name, sicode) \
+int name(unsigned long address, struct pt_regs *regs) \
+{								\
+	return unhandled_exception(str, regs, signr, sicode,	\
+				   (void __user *)address);	\
+}
+
+/*
+ * Entry points for exceptions NOT needing specific handling
+ */
+DO_ERROR_INFO(SIGILL, "Priv Op/Disabled Extn", do_privilege_fault, ILL_PRVOPC)
+DO_ERROR_INFO(SIGILL, "Invalid Extn Insn", do_extension_fault, ILL_ILLOPC)
+DO_ERROR_INFO(SIGILL, "Illegal Insn (or Seq)", insterror_is_error, ILL_ILLOPC)
+DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", __weak do_memory_error, BUS_ADRERR)
+DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT)
+DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN)
+DO_ERROR_INFO(SIGSEGV, "gcc generated __builtin_trap", do_trap5_error, 0)
+
+/*
+ * Entry Point for Misaligned Data access Exception, for emulating in software
+ */
+int do_misaligned_access(unsigned long address, struct pt_regs *regs,
+			 struct callee_regs *cregs)
+{
+	/* If emulation not enabled, or failed, kill the task */
+	if (misaligned_fixup(address, regs, cregs) != 0)
+		return do_misaligned_error(address, regs);
+
+	return 0;
+}
+
+/*
+ * Entry point for miscll errors such as Nested Exceptions
+ *  -Duplicate TLB entry is handled seperately though
+ */
+void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
+{
+	die("Unhandled Machine Check Exception", regs, address);
+}
+
+
+/*
+ * Entry point for traps induced by ARCompact TRAP_S <n> insn
+ * This is same family as TRAP0/SWI insn (use the same vector).
+ * The only difference being SWI insn take no operand, while TRAP_S does
+ * which reflects in ECR Reg as 8 bit param.
+ * Thus TRAP_S <n> can be used for specific purpose
+ *  -1 used for software breakpointing (gdb)
+ *  -2 used by kprobes
+ *  -5 __builtin_trap() generated by gcc (2018.03 onwards) for toggle such as
+ *     -fno-isolate-erroneous-paths-dereference
+ */
+void do_non_swi_trap(unsigned long address, struct pt_regs *regs)
+{
+	unsigned int param = regs->ecr_param;
+
+	switch (param) {
+	case 1:
+		trap_is_brkpt(address, regs);
+		break;
+
+	case 2:
+		trap_is_kprobe(address, regs);
+		break;
+
+	case 3:
+	case 4:
+		kgdb_trap(regs);
+		break;
+
+	case 5:
+		do_trap5_error(address, regs);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
+ * Entry point for Instruction Error Exception
+ *  -For a corner case, ARC kprobes implementation resorts to using
+ *   this exception, hence the check
+ */
+void do_insterror_or_kprobe(unsigned long address, struct pt_regs *regs)
+{
+	int rc;
+
+	/* Check if this exception is caused by kprobes */
+	rc = notify_die(DIE_IERR, "kprobe_ierr", regs, address, 0, SIGILL);
+	if (rc == NOTIFY_STOP)
+		return;
+
+	insterror_is_error(address, regs);
+}
+
+/*
+ * abort() call generated by older gcc for __builtin_trap()
+ */
+void abort(void)
+{
+	__asm__ __volatile__("trap_s  5\n");
+}
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
new file mode 100644
index 000000000..7654c2e42
--- /dev/null
+++ b/arch/arc/kernel/troubleshoot.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/ptrace.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/kdev_t.h>
+#include <linux/proc_fs.h>
+#include <linux/file.h>
+#include <linux/sched/mm.h>
+#include <linux/sched/debug.h>
+
+#include <asm/arcregs.h>
+#include <asm/irqflags.h>
+
+#define ARC_PATH_MAX	256
+
+static noinline void print_regs_scratch(struct pt_regs *regs)
+{
+	pr_cont("BTA: 0x%08lx\n SP: 0x%08lx  FP: 0x%08lx BLK: %pS\n",
+		regs->bta, regs->sp, regs->fp, (void *)regs->blink);
+	pr_cont("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
+		regs->lp_start, regs->lp_end, regs->lp_count);
+
+	pr_info("r00: 0x%08lx\tr01: 0x%08lx\tr02: 0x%08lx\n"	\
+		"r03: 0x%08lx\tr04: 0x%08lx\tr05: 0x%08lx\n"	\
+		"r06: 0x%08lx\tr07: 0x%08lx\tr08: 0x%08lx\n"	\
+		"r09: 0x%08lx\tr10: 0x%08lx\tr11: 0x%08lx\n"	\
+		"r12: 0x%08lx\t",
+		regs->r0, regs->r1, regs->r2,
+		regs->r3, regs->r4, regs->r5,
+		regs->r6, regs->r7, regs->r8,
+		regs->r9, regs->r10, regs->r11,
+		regs->r12);
+}
+
+static void print_regs_callee(struct callee_regs *regs)
+{
+	pr_cont("r13: 0x%08lx\tr14: 0x%08lx\n"			\
+		"r15: 0x%08lx\tr16: 0x%08lx\tr17: 0x%08lx\n"	\
+		"r18: 0x%08lx\tr19: 0x%08lx\tr20: 0x%08lx\n"	\
+		"r21: 0x%08lx\tr22: 0x%08lx\tr23: 0x%08lx\n"	\
+		"r24: 0x%08lx\tr25: 0x%08lx\n",
+		regs->r13, regs->r14,
+		regs->r15, regs->r16, regs->r17,
+		regs->r18, regs->r19, regs->r20,
+		regs->r21, regs->r22, regs->r23,
+		regs->r24, regs->r25);
+}
+
+static void print_task_path_n_nm(struct task_struct *tsk)
+{
+	char *path_nm = NULL;
+	struct mm_struct *mm;
+	struct file *exe_file;
+	char buf[ARC_PATH_MAX];
+
+	mm = get_task_mm(tsk);
+	if (!mm)
+		goto done;
+
+	exe_file = get_mm_exe_file(mm);
+	mmput(mm);
+
+	if (exe_file) {
+		path_nm = file_path(exe_file, buf, ARC_PATH_MAX-1);
+		fput(exe_file);
+	}
+
+done:
+	pr_info("Path: %s\n", !IS_ERR(path_nm) ? path_nm : "?");
+}
+
+static void show_faulting_vma(unsigned long address)
+{
+	struct vm_area_struct *vma;
+	struct mm_struct *active_mm = current->active_mm;
+
+	/* can't use print_vma_addr() yet as it doesn't check for
+	 * non-inclusive vma
+	 */
+	mmap_read_lock(active_mm);
+	vma = vma_lookup(active_mm, address);
+
+	/* Lookup the vma at the address and report if the container VMA is not
+	 * found
+	 */
+	if (vma) {
+		char buf[ARC_PATH_MAX];
+		char *nm = "?";
+
+		if (vma->vm_file) {
+			nm = file_path(vma->vm_file, buf, ARC_PATH_MAX-1);
+			if (IS_ERR(nm))
+				nm = "?";
+		}
+		pr_info("  @off 0x%lx in [%s]  VMA: 0x%08lx to 0x%08lx\n",
+			vma->vm_start < TASK_UNMAPPED_BASE ?
+				address : address - vma->vm_start,
+			nm, vma->vm_start, vma->vm_end);
+	} else
+		pr_info("    @No matching VMA found\n");
+
+	mmap_read_unlock(active_mm);
+}
+
+static void show_ecr_verbose(struct pt_regs *regs)
+{
+	unsigned int vec, cause_code;
+	unsigned long address;
+
+	/* For Data fault, this is data address not instruction addr */
+	address = current->thread.fault_address;
+
+	vec = regs->ecr_vec;
+	cause_code = regs->ecr_cause;
+
+	/* For DTLB Miss or ProtV, display the memory involved too */
+	if (vec == ECR_V_DTLB_MISS) {
+		pr_cont("Invalid %s @ 0x%08lx by insn @ %pS\n",
+		       (cause_code == 0x01) ? "Read" :
+		       ((cause_code == 0x02) ? "Write" : "EX"),
+		       address, (void *)regs->ret);
+	} else if (vec == ECR_V_ITLB_MISS) {
+		pr_cont("Insn could not be fetched\n");
+	} else if (vec == ECR_V_MACH_CHK) {
+		pr_cont("Machine Check (%s)\n", (cause_code == 0x0) ?
+					"Double Fault" : "Other Fatal Err");
+
+	} else if (vec == ECR_V_PROTV) {
+		if (cause_code == ECR_C_PROTV_INST_FETCH)
+			pr_cont("Execute from Non-exec Page\n");
+		else if (cause_code == ECR_C_PROTV_MISALIG_DATA &&
+		         IS_ENABLED(CONFIG_ISA_ARCOMPACT))
+			pr_cont("Misaligned r/w from 0x%08lx\n", address);
+		else
+			pr_cont("%s access not allowed on page\n",
+				(cause_code == 0x01) ? "Read" :
+				((cause_code == 0x02) ? "Write" : "EX"));
+	} else if (vec == ECR_V_INSN_ERR) {
+		pr_cont("Illegal Insn\n");
+#ifdef CONFIG_ISA_ARCV2
+	} else if (vec == ECR_V_MEM_ERR) {
+		if (cause_code == 0x00)
+			pr_cont("Bus Error from Insn Mem\n");
+		else if (cause_code == 0x10)
+			pr_cont("Bus Error from Data Mem\n");
+		else
+			pr_cont("Bus Error, check PRM\n");
+	} else if (vec == ECR_V_MISALIGN) {
+		pr_cont("Misaligned r/w from 0x%08lx\n", address);
+#endif
+	} else if (vec == ECR_V_TRAP) {
+		if (regs->ecr_param == 5)
+			pr_cont("gcc generated __builtin_trap\n");
+	} else {
+		pr_cont("Check Programmer's Manual\n");
+	}
+}
+
+/************************************************************************
+ *  API called by rest of kernel
+ ***********************************************************************/
+
+void show_regs(struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+	struct callee_regs *cregs = (struct callee_regs *)tsk->thread.callee_reg;
+
+	/*
+	 * generic code calls us with preemption disabled, but some calls
+	 * here could sleep, so re-enable to avoid lockdep splat
+	 */
+	preempt_enable();
+
+	print_task_path_n_nm(tsk);
+	show_regs_print_info(KERN_INFO);
+
+	show_ecr_verbose(regs);
+
+	if (user_mode(regs))
+		show_faulting_vma(regs->ret); /* faulting code, not data */
+
+	pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\nSTAT: 0x%08lx",
+		regs->event, current->thread.fault_address, regs->ret,
+		regs->status32);
+
+#define STS_BIT(r, bit)	r->status32 & STATUS_##bit##_MASK ? #bit" " : ""
+
+#ifdef CONFIG_ISA_ARCOMPACT
+	pr_cont(" [%2s%2s%2s%2s%2s%2s%2s]",
+			(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
+			STS_BIT(regs, DE), STS_BIT(regs, AE),
+			STS_BIT(regs, A2), STS_BIT(regs, A1),
+			STS_BIT(regs, E2), STS_BIT(regs, E1));
+#else
+	pr_cont(" [%2s%2s%2s%2s]   ",
+			STS_BIT(regs, IE),
+			(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
+			STS_BIT(regs, DE), STS_BIT(regs, AE));
+#endif
+
+	print_regs_scratch(regs);
+	if (cregs)
+		print_regs_callee(cregs);
+
+	preempt_disable();
+}
+
+void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
+			    unsigned long address)
+{
+	current->thread.fault_address = address;
+
+	/* Show fault description */
+	pr_info("\n%s\n", str);
+
+	/* Caller and Callee regs */
+	show_regs(regs);
+
+	/* Show stack trace if this Fatality happened in kernel mode */
+	if (!user_mode(regs))
+		show_stacktrace(current, regs, KERN_DEFAULT);
+}
diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c
new file mode 100644
index 000000000..99a9b92ed
--- /dev/null
+++ b/arch/arc/kernel/unaligned.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011-2012 Synopsys (www.synopsys.com)
+ *
+ * vineetg : May 2011
+ *  -Adapted (from .26 to .35)
+ *  -original contribution by Tim.yao@amlogic.com
+ */
+
+#include <linux/types.h>
+#include <linux/perf_event.h>
+#include <linux/ptrace.h>
+#include <linux/uaccess.h>
+#include <asm/disasm.h>
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define BE		1
+#define FIRST_BYTE_16	"swap %1, %1\n swape %1, %1\n"
+#define FIRST_BYTE_32	"swape %1, %1\n"
+#else
+#define BE		0
+#define FIRST_BYTE_16
+#define FIRST_BYTE_32
+#endif
+
+#define __get8_unaligned_check(val, addr, err)		\
+	__asm__(					\
+	"1:	ldb.ab	%1, [%2, 1]\n"			\
+	"2:\n"						\
+	"	.section .fixup,\"ax\"\n"		\
+	"	.align	4\n"				\
+	"3:	mov	%0, 1\n"			\
+	"	j	2b\n"				\
+	"	.previous\n"				\
+	"	.section __ex_table,\"a\"\n"		\
+	"	.align	4\n"				\
+	"	.long	1b, 3b\n"			\
+	"	.previous\n"				\
+	: "=r" (err), "=&r" (val), "=r" (addr)		\
+	: "0" (err), "2" (addr))
+
+#define get16_unaligned_check(val, addr)		\
+	do {						\
+		unsigned int err = 0, v, a = addr;	\
+		__get8_unaligned_check(v, a, err);	\
+		val =  v << ((BE) ? 8 : 0);		\
+		__get8_unaligned_check(v, a, err);	\
+		val |= v << ((BE) ? 0 : 8);		\
+		if (err)				\
+			goto fault;			\
+	} while (0)
+
+#define get32_unaligned_check(val, addr)		\
+	do {						\
+		unsigned int err = 0, v, a = addr;	\
+		__get8_unaligned_check(v, a, err);	\
+		val =  v << ((BE) ? 24 : 0);		\
+		__get8_unaligned_check(v, a, err);	\
+		val |= v << ((BE) ? 16 : 8);		\
+		__get8_unaligned_check(v, a, err);	\
+		val |= v << ((BE) ? 8 : 16);		\
+		__get8_unaligned_check(v, a, err);	\
+		val |= v << ((BE) ? 0 : 24);		\
+		if (err)				\
+			goto fault;			\
+	} while (0)
+
+#define put16_unaligned_check(val, addr)		\
+	do {						\
+		unsigned int err = 0, v = val, a = addr;\
+							\
+		__asm__(				\
+		FIRST_BYTE_16				\
+		"1:	stb.ab	%1, [%2, 1]\n"		\
+		"	lsr %1, %1, 8\n"		\
+		"2:	stb	%1, [%2]\n"		\
+		"3:\n"					\
+		"	.section .fixup,\"ax\"\n"	\
+		"	.align	4\n"			\
+		"4:	mov	%0, 1\n"		\
+		"	j	3b\n"			\
+		"	.previous\n"			\
+		"	.section __ex_table,\"a\"\n"	\
+		"	.align	4\n"			\
+		"	.long	1b, 4b\n"		\
+		"	.long	2b, 4b\n"		\
+		"	.previous\n"			\
+		: "=r" (err), "=&r" (v), "=&r" (a)	\
+		: "0" (err), "1" (v), "2" (a));		\
+							\
+		if (err)				\
+			goto fault;			\
+	} while (0)
+
+#define put32_unaligned_check(val, addr)		\
+	do {						\
+		unsigned int err = 0, v = val, a = addr;\
+							\
+		__asm__(				\
+		FIRST_BYTE_32				\
+		"1:	stb.ab	%1, [%2, 1]\n"		\
+		"	lsr %1, %1, 8\n"		\
+		"2:	stb.ab	%1, [%2, 1]\n"		\
+		"	lsr %1, %1, 8\n"		\
+		"3:	stb.ab	%1, [%2, 1]\n"		\
+		"	lsr %1, %1, 8\n"		\
+		"4:	stb	%1, [%2]\n"		\
+		"5:\n"					\
+		"	.section .fixup,\"ax\"\n"	\
+		"	.align	4\n"			\
+		"6:	mov	%0, 1\n"		\
+		"	j	5b\n"			\
+		"	.previous\n"			\
+		"	.section __ex_table,\"a\"\n"	\
+		"	.align	4\n"			\
+		"	.long	1b, 6b\n"		\
+		"	.long	2b, 6b\n"		\
+		"	.long	3b, 6b\n"		\
+		"	.long	4b, 6b\n"		\
+		"	.previous\n"			\
+		: "=r" (err), "=&r" (v), "=&r" (a)	\
+		: "0" (err), "1" (v), "2" (a));		\
+							\
+		if (err)				\
+			goto fault;			\
+	} while (0)
+
+/* sysctl hooks */
+int unaligned_enabled __read_mostly = 1;	/* Enabled by default */
+int no_unaligned_warning __read_mostly = 1;	/* Only 1 warning by default */
+
+static void fixup_load(struct disasm_state *state, struct pt_regs *regs,
+			struct callee_regs *cregs)
+{
+	int val;
+
+	/* register write back */
+	if ((state->aa == 1) || (state->aa == 2)) {
+		set_reg(state->wb_reg, state->src1 + state->src2, regs, cregs);
+
+		if (state->aa == 2)
+			state->src2 = 0;
+	}
+
+	if (state->zz == 0) {
+		get32_unaligned_check(val, state->src1 + state->src2);
+	} else {
+		get16_unaligned_check(val, state->src1 + state->src2);
+
+		if (state->x)
+			val = (val << 16) >> 16;
+	}
+
+	if (state->pref == 0)
+		set_reg(state->dest, val, regs, cregs);
+
+	return;
+
+fault:	state->fault = 1;
+}
+
+static void fixup_store(struct disasm_state *state, struct pt_regs *regs,
+			struct callee_regs *cregs)
+{
+	/* register write back */
+	if ((state->aa == 1) || (state->aa == 2)) {
+		set_reg(state->wb_reg, state->src2 + state->src3, regs, cregs);
+
+		if (state->aa == 3)
+			state->src3 = 0;
+	} else if (state->aa == 3) {
+		if (state->zz == 2) {
+			set_reg(state->wb_reg, state->src2 + (state->src3 << 1),
+				regs, cregs);
+		} else if (!state->zz) {
+			set_reg(state->wb_reg, state->src2 + (state->src3 << 2),
+				regs, cregs);
+		} else {
+			goto fault;
+		}
+	}
+
+	/* write fix-up */
+	if (!state->zz)
+		put32_unaligned_check(state->src1, state->src2 + state->src3);
+	else
+		put16_unaligned_check(state->src1, state->src2 + state->src3);
+
+	return;
+
+fault:	state->fault = 1;
+}
+
+/*
+ * Handle an unaligned access
+ * Returns 0 if successfully handled, 1 if some error happened
+ */
+int misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		     struct callee_regs *cregs)
+{
+	struct disasm_state state;
+	char buf[TASK_COMM_LEN];
+
+	/* handle user mode only and only if enabled by sysadmin */
+	if (!user_mode(regs) || !unaligned_enabled)
+		return 1;
+
+	if (no_unaligned_warning) {
+		pr_warn_once("%s(%d) made unaligned access which was emulated"
+			     " by kernel assist\n. This can degrade application"
+			     " performance significantly\n. To enable further"
+			     " logging of such instances, please \n"
+			     " echo 0 > /proc/sys/kernel/ignore-unaligned-usertrap\n",
+			     get_task_comm(buf, current), task_pid_nr(current));
+	} else {
+		/* Add rate limiting if it gets down to it */
+		pr_warn("%s(%d): unaligned access to/from 0x%lx by PC: 0x%lx\n",
+			get_task_comm(buf, current), task_pid_nr(current),
+			address, regs->ret);
+
+	}
+
+	disasm_instr(regs->ret, &state, 1, regs, cregs);
+
+	if (state.fault)
+		goto fault;
+
+	/* ldb/stb should not have unaligned exception */
+	if ((state.zz == 1) || (state.di))
+		goto fault;
+
+	if (!state.write)
+		fixup_load(&state, regs, cregs);
+	else
+		fixup_store(&state, regs, cregs);
+
+	if (state.fault)
+		goto fault;
+
+	/* clear any remnants of delay slot */
+	if (delay_mode(regs)) {
+		regs->ret = regs->bta & ~1U;
+		regs->status32 &= ~STATUS_DE_MASK;
+	} else {
+		regs->ret += state.instr_len;
+
+		/* handle zero-overhead-loop */
+		if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
+			regs->ret = regs->lp_start;
+			regs->lp_count--;
+		}
+	}
+
+	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, address);
+	return 0;
+
+fault:
+	pr_err("Alignment trap: fault in fix-up %08lx at [<%08lx>]\n",
+		state.words[0], address);
+
+	return 1;
+}
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
new file mode 100644
index 000000000..200270a94
--- /dev/null
+++ b/arch/arc/kernel/unwind.c
@@ -0,0 +1,1313 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2002-2006 Novell, Inc.
+ *	Jan Beulich <jbeulich@novell.com>
+ *
+ * A simple API for unwinding kernel stacks.  This is used for
+ * debugging and error reporting purposes.  The kernel doesn't need
+ * full-blown stack unwinding with all the bells and whistles, so there
+ * is not much point in implementing the full Dwarf2 unwind API.
+ */
+
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/memblock.h>
+#include <linux/sort.h>
+#include <linux/slab.h>
+#include <linux/stop_machine.h>
+#include <linux/uaccess.h>
+#include <linux/ptrace.h>
+#include <asm/sections.h>
+#include <asm/unaligned.h>
+#include <asm/unwind.h>
+
+extern char __start_unwind[], __end_unwind[];
+/* extern const u8 __start_unwind_hdr[], __end_unwind_hdr[];*/
+
+/* #define UNWIND_DEBUG */
+
+#ifdef UNWIND_DEBUG
+int dbg_unw;
+#define unw_debug(fmt, ...)			\
+do {						\
+	if (dbg_unw)				\
+		pr_info(fmt, ##__VA_ARGS__);	\
+} while (0);
+#else
+#define unw_debug(fmt, ...)
+#endif
+
+#define MAX_STACK_DEPTH 8
+
+#define EXTRA_INFO(f) { \
+		BUILD_BUG_ON_ZERO(offsetof(struct unwind_frame_info, f) \
+				% sizeof_field(struct unwind_frame_info, f)) \
+				+ offsetof(struct unwind_frame_info, f) \
+				/ sizeof_field(struct unwind_frame_info, f), \
+				sizeof_field(struct unwind_frame_info, f) \
+	}
+#define PTREGS_INFO(f) EXTRA_INFO(regs.f)
+
+static const struct {
+	unsigned offs:BITS_PER_LONG / 2;
+	unsigned width:BITS_PER_LONG / 2;
+} reg_info[] = {
+UNW_REGISTER_INFO};
+
+#undef PTREGS_INFO
+#undef EXTRA_INFO
+
+#ifndef REG_INVALID
+#define REG_INVALID(r) (reg_info[r].width == 0)
+#endif
+
+#define DW_CFA_nop                          0x00
+#define DW_CFA_set_loc                      0x01
+#define DW_CFA_advance_loc1                 0x02
+#define DW_CFA_advance_loc2                 0x03
+#define DW_CFA_advance_loc4                 0x04
+#define DW_CFA_offset_extended              0x05
+#define DW_CFA_restore_extended             0x06
+#define DW_CFA_undefined                    0x07
+#define DW_CFA_same_value                   0x08
+#define DW_CFA_register                     0x09
+#define DW_CFA_remember_state               0x0a
+#define DW_CFA_restore_state                0x0b
+#define DW_CFA_def_cfa                      0x0c
+#define DW_CFA_def_cfa_register             0x0d
+#define DW_CFA_def_cfa_offset               0x0e
+#define DW_CFA_def_cfa_expression           0x0f
+#define DW_CFA_expression                   0x10
+#define DW_CFA_offset_extended_sf           0x11
+#define DW_CFA_def_cfa_sf                   0x12
+#define DW_CFA_def_cfa_offset_sf            0x13
+#define DW_CFA_val_offset                   0x14
+#define DW_CFA_val_offset_sf                0x15
+#define DW_CFA_val_expression               0x16
+#define DW_CFA_lo_user                      0x1c
+#define DW_CFA_GNU_window_save              0x2d
+#define DW_CFA_GNU_args_size                0x2e
+#define DW_CFA_GNU_negative_offset_extended 0x2f
+#define DW_CFA_hi_user                      0x3f
+
+#define DW_EH_PE_FORM     0x07
+#define DW_EH_PE_native   0x00
+#define DW_EH_PE_leb128   0x01
+#define DW_EH_PE_data2    0x02
+#define DW_EH_PE_data4    0x03
+#define DW_EH_PE_data8    0x04
+#define DW_EH_PE_signed   0x08
+#define DW_EH_PE_ADJUST   0x70
+#define DW_EH_PE_abs      0x00
+#define DW_EH_PE_pcrel    0x10
+#define DW_EH_PE_textrel  0x20
+#define DW_EH_PE_datarel  0x30
+#define DW_EH_PE_funcrel  0x40
+#define DW_EH_PE_aligned  0x50
+#define DW_EH_PE_indirect 0x80
+#define DW_EH_PE_omit     0xff
+
+#define CIE_ID	0
+
+typedef unsigned long uleb128_t;
+typedef signed long sleb128_t;
+
+static struct unwind_table {
+	struct {
+		unsigned long pc;
+		unsigned long range;
+	} core, init;
+	const void *address;
+	unsigned long size;
+	const unsigned char *header;
+	unsigned long hdrsz;
+	struct unwind_table *link;
+	const char *name;
+} root_table;
+
+struct unwind_item {
+	enum item_location {
+		Nowhere,
+		Memory,
+		Register,
+		Value
+	} where;
+	uleb128_t value;
+};
+
+struct unwind_state {
+	uleb128_t loc, org;
+	const u8 *cieStart, *cieEnd;
+	uleb128_t codeAlign;
+	sleb128_t dataAlign;
+	struct cfa {
+		uleb128_t reg, offs;
+	} cfa;
+	struct unwind_item regs[ARRAY_SIZE(reg_info)];
+	unsigned stackDepth:8;
+	unsigned version:8;
+	const u8 *label;
+	const u8 *stack[MAX_STACK_DEPTH];
+};
+
+static const struct cfa badCFA = { ARRAY_SIZE(reg_info), 1 };
+
+static struct unwind_table *find_table(unsigned long pc)
+{
+	struct unwind_table *table;
+
+	for (table = &root_table; table; table = table->link)
+		if ((pc >= table->core.pc
+		     && pc < table->core.pc + table->core.range)
+		    || (pc >= table->init.pc
+			&& pc < table->init.pc + table->init.range))
+			break;
+
+	return table;
+}
+
+static unsigned long read_pointer(const u8 **pLoc,
+				  const void *end, signed ptrType);
+static void init_unwind_hdr(struct unwind_table *table,
+			    void *(*alloc) (unsigned long));
+
+/*
+ * wrappers for header alloc (vs. calling one vs. other at call site)
+ * to elide section mismatches warnings
+ */
+static void *__init unw_hdr_alloc_early(unsigned long sz)
+{
+	return memblock_alloc_from(sz, sizeof(unsigned int), MAX_DMA_ADDRESS);
+}
+
+static void init_unwind_table(struct unwind_table *table, const char *name,
+			      const void *core_start, unsigned long core_size,
+			      const void *init_start, unsigned long init_size,
+			      const void *table_start, unsigned long table_size,
+			      const u8 *header_start, unsigned long header_size)
+{
+	table->core.pc = (unsigned long)core_start;
+	table->core.range = core_size;
+	table->init.pc = (unsigned long)init_start;
+	table->init.range = init_size;
+	table->address = table_start;
+	table->size = table_size;
+	/* To avoid the pointer addition with NULL pointer.*/
+	if (header_start != NULL) {
+		const u8 *ptr = header_start + 4;
+		const u8 *end = header_start + header_size;
+		/* See if the linker provided table looks valid. */
+		if (header_size <= 4
+		|| header_start[0] != 1
+		|| (void *)read_pointer(&ptr, end, header_start[1])
+				!= table_start
+		|| header_start[2] == DW_EH_PE_omit
+		|| read_pointer(&ptr, end, header_start[2]) <= 0
+		|| header_start[3] == DW_EH_PE_omit)
+			header_start = NULL;
+	}
+	table->hdrsz = header_size;
+	smp_wmb();
+	table->header = header_start;
+	table->link = NULL;
+	table->name = name;
+}
+
+void __init arc_unwind_init(void)
+{
+	init_unwind_table(&root_table, "kernel", _text, _end - _text, NULL, 0,
+			  __start_unwind, __end_unwind - __start_unwind,
+			  NULL, 0);
+	  /*__start_unwind_hdr, __end_unwind_hdr - __start_unwind_hdr);*/
+
+	init_unwind_hdr(&root_table, unw_hdr_alloc_early);
+}
+
+static const u32 bad_cie, not_fde;
+static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *);
+static const u32 *__cie_for_fde(const u32 *fde);
+static signed fde_pointer_type(const u32 *cie);
+
+struct eh_frame_hdr_table_entry {
+	unsigned long start, fde;
+};
+
+static int cmp_eh_frame_hdr_table_entries(const void *p1, const void *p2)
+{
+	const struct eh_frame_hdr_table_entry *e1 = p1;
+	const struct eh_frame_hdr_table_entry *e2 = p2;
+
+	return (e1->start > e2->start) - (e1->start < e2->start);
+}
+
+static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
+{
+	struct eh_frame_hdr_table_entry *e1 = p1;
+	struct eh_frame_hdr_table_entry *e2 = p2;
+
+	swap(e1->start, e2->start);
+	swap(e1->fde, e2->fde);
+}
+
+static void init_unwind_hdr(struct unwind_table *table,
+			    void *(*alloc) (unsigned long))
+{
+	const u8 *ptr;
+	unsigned long tableSize = table->size, hdrSize;
+	unsigned int n;
+	const u32 *fde;
+	struct {
+		u8 version;
+		u8 eh_frame_ptr_enc;
+		u8 fde_count_enc;
+		u8 table_enc;
+		unsigned long eh_frame_ptr;
+		unsigned int fde_count;
+		struct eh_frame_hdr_table_entry table[];
+	} __attribute__ ((__packed__)) *header;
+
+	if (table->header)
+		return;
+
+	if (table->hdrsz)
+		pr_warn(".eh_frame_hdr for '%s' present but unusable\n",
+			table->name);
+
+	if (tableSize & (sizeof(*fde) - 1))
+		return;
+
+	for (fde = table->address, n = 0;
+	     tableSize > sizeof(*fde) && tableSize - sizeof(*fde) >= *fde;
+	     tableSize -= sizeof(*fde) + *fde, fde += 1 + *fde / sizeof(*fde)) {
+		const u32 *cie = cie_for_fde(fde, table);
+		signed ptrType;
+
+		if (cie == &not_fde)
+			continue;
+		if (cie == NULL || cie == &bad_cie)
+			goto ret_err;
+		ptrType = fde_pointer_type(cie);
+		if (ptrType < 0)
+			goto ret_err;
+
+		ptr = (const u8 *)(fde + 2);
+		if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde,
+								ptrType)) {
+			/* FIXME_Rajesh We have 4 instances of null addresses
+			 * instead of the initial loc addr
+			 * return;
+			 */
+			WARN(1, "unwinder: FDE->initial_location NULL %p\n",
+				(const u8 *)(fde + 1) + *fde);
+		}
+		++n;
+	}
+
+	if (tableSize || !n)
+		goto ret_err;
+
+	hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int)
+	    + 2 * n * sizeof(unsigned long);
+
+	header = alloc(hdrSize);
+	if (!header)
+		goto ret_err;
+
+	header->version = 1;
+	header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native;
+	header->fde_count_enc = DW_EH_PE_abs | DW_EH_PE_data4;
+	header->table_enc = DW_EH_PE_abs | DW_EH_PE_native;
+	put_unaligned((unsigned long)table->address, &header->eh_frame_ptr);
+	BUILD_BUG_ON(offsetof(typeof(*header), fde_count)
+		     % __alignof(typeof(header->fde_count)));
+	header->fde_count = n;
+
+	BUILD_BUG_ON(offsetof(typeof(*header), table)
+		     % __alignof(typeof(*header->table)));
+	for (fde = table->address, tableSize = table->size, n = 0;
+	     tableSize;
+	     tableSize -= sizeof(*fde) + *fde, fde += 1 + *fde / sizeof(*fde)) {
+		const u32 *cie = __cie_for_fde(fde);
+
+		if (fde[1] == CIE_ID)
+			continue;	/* this is a CIE */
+		ptr = (const u8 *)(fde + 2);
+		header->table[n].start = read_pointer(&ptr,
+						      (const u8 *)(fde + 1) +
+						      *fde,
+						      fde_pointer_type(cie));
+		header->table[n].fde = (unsigned long)fde;
+		++n;
+	}
+	WARN_ON(n != header->fde_count);
+
+	sort(header->table,
+	     n,
+	     sizeof(*header->table),
+	     cmp_eh_frame_hdr_table_entries, swap_eh_frame_hdr_table_entries);
+
+	table->hdrsz = hdrSize;
+	smp_wmb();
+	table->header = (const void *)header;
+	return;
+
+ret_err:
+	panic("Attention !!! Dwarf FDE parsing errors\n");
+}
+
+#ifdef CONFIG_MODULES
+static void *unw_hdr_alloc(unsigned long sz)
+{
+	return kmalloc(sz, GFP_KERNEL);
+}
+
+static struct unwind_table *last_table;
+
+/* Must be called with module_mutex held. */
+void *unwind_add_table(struct module *module, const void *table_start,
+		       unsigned long table_size)
+{
+	struct unwind_table *table;
+
+	if (table_size <= 0)
+		return NULL;
+
+	table = kmalloc(sizeof(*table), GFP_KERNEL);
+	if (!table)
+		return NULL;
+
+	init_unwind_table(table, module->name,
+			  module->core_layout.base, module->core_layout.size,
+			  module->init_layout.base, module->init_layout.size,
+			  table_start, table_size,
+			  NULL, 0);
+
+	init_unwind_hdr(table, unw_hdr_alloc);
+
+#ifdef UNWIND_DEBUG
+	unw_debug("Table added for [%s] %lx %lx\n",
+		module->name, table->core.pc, table->core.range);
+#endif
+	if (last_table)
+		last_table->link = table;
+	else
+		root_table.link = table;
+	last_table = table;
+
+	return table;
+}
+
+struct unlink_table_info {
+	struct unwind_table *table;
+	int init_only;
+};
+
+static int unlink_table(void *arg)
+{
+	struct unlink_table_info *info = arg;
+	struct unwind_table *table = info->table, *prev;
+
+	for (prev = &root_table; prev->link && prev->link != table;
+	     prev = prev->link)
+		;
+
+	if (prev->link) {
+		if (info->init_only) {
+			table->init.pc = 0;
+			table->init.range = 0;
+			info->table = NULL;
+		} else {
+			prev->link = table->link;
+			if (!prev->link)
+				last_table = prev;
+		}
+	} else
+		info->table = NULL;
+
+	return 0;
+}
+
+/* Must be called with module_mutex held. */
+void unwind_remove_table(void *handle, int init_only)
+{
+	struct unwind_table *table = handle;
+	struct unlink_table_info info;
+
+	if (!table || table == &root_table)
+		return;
+
+	if (init_only && table == last_table) {
+		table->init.pc = 0;
+		table->init.range = 0;
+		return;
+	}
+
+	info.table = table;
+	info.init_only = init_only;
+
+	unlink_table(&info); /* XXX: SMP */
+	kfree(table->header);
+	kfree(table);
+}
+
+#endif /* CONFIG_MODULES */
+
+static uleb128_t get_uleb128(const u8 **pcur, const u8 *end)
+{
+	const u8 *cur = *pcur;
+	uleb128_t value;
+	unsigned int shift;
+
+	for (shift = 0, value = 0; cur < end; shift += 7) {
+		if (shift + 7 > 8 * sizeof(value)
+		    && (*cur & 0x7fU) >= (1U << (8 * sizeof(value) - shift))) {
+			cur = end + 1;
+			break;
+		}
+		value |= (uleb128_t) (*cur & 0x7f) << shift;
+		if (!(*cur++ & 0x80))
+			break;
+	}
+	*pcur = cur;
+
+	return value;
+}
+
+static sleb128_t get_sleb128(const u8 **pcur, const u8 *end)
+{
+	const u8 *cur = *pcur;
+	sleb128_t value;
+	unsigned int shift;
+
+	for (shift = 0, value = 0; cur < end; shift += 7) {
+		if (shift + 7 > 8 * sizeof(value)
+		    && (*cur & 0x7fU) >= (1U << (8 * sizeof(value) - shift))) {
+			cur = end + 1;
+			break;
+		}
+		value |= (sleb128_t) (*cur & 0x7f) << shift;
+		if (!(*cur & 0x80)) {
+			value |= -(*cur++ & 0x40) << shift;
+			break;
+		}
+	}
+	*pcur = cur;
+
+	return value;
+}
+
+static const u32 *__cie_for_fde(const u32 *fde)
+{
+	const u32 *cie;
+
+	cie = fde + 1 - fde[1] / sizeof(*fde);
+
+	return cie;
+}
+
+static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table)
+{
+	const u32 *cie;
+
+	if (!*fde || (*fde & (sizeof(*fde) - 1)))
+		return &bad_cie;
+
+	if (fde[1] == CIE_ID)
+		return &not_fde;	/* this is a CIE */
+
+	if ((fde[1] & (sizeof(*fde) - 1)))
+/* || fde[1] > (unsigned long)(fde + 1) - (unsigned long)table->address) */
+		return NULL;	/* this is not a valid FDE */
+
+	cie = __cie_for_fde(fde);
+
+	if (*cie <= sizeof(*cie) + 4 || *cie >= fde[1] - sizeof(*fde)
+	    || (*cie & (sizeof(*cie) - 1))
+	    || (cie[1] != CIE_ID))
+		return NULL;	/* this is not a (valid) CIE */
+	return cie;
+}
+
+static unsigned long read_pointer(const u8 **pLoc, const void *end,
+				  signed ptrType)
+{
+	unsigned long value = 0;
+	union {
+		const u8 *p8;
+		const u16 *p16u;
+		const s16 *p16s;
+		const u32 *p32u;
+		const s32 *p32s;
+		const unsigned long *pul;
+	} ptr;
+
+	if (ptrType < 0 || ptrType == DW_EH_PE_omit)
+		return 0;
+	ptr.p8 = *pLoc;
+	switch (ptrType & DW_EH_PE_FORM) {
+	case DW_EH_PE_data2:
+		if (end < (const void *)(ptr.p16u + 1))
+			return 0;
+		if (ptrType & DW_EH_PE_signed)
+			value = get_unaligned((u16 *) ptr.p16s++);
+		else
+			value = get_unaligned((u16 *) ptr.p16u++);
+		break;
+	case DW_EH_PE_data4:
+#ifdef CONFIG_64BIT
+		if (end < (const void *)(ptr.p32u + 1))
+			return 0;
+		if (ptrType & DW_EH_PE_signed)
+			value = get_unaligned(ptr.p32s++);
+		else
+			value = get_unaligned(ptr.p32u++);
+		break;
+	case DW_EH_PE_data8:
+		BUILD_BUG_ON(sizeof(u64) != sizeof(value));
+#else
+		BUILD_BUG_ON(sizeof(u32) != sizeof(value));
+#endif
+		fallthrough;
+	case DW_EH_PE_native:
+		if (end < (const void *)(ptr.pul + 1))
+			return 0;
+		value = get_unaligned((unsigned long *)ptr.pul++);
+		break;
+	case DW_EH_PE_leb128:
+		BUILD_BUG_ON(sizeof(uleb128_t) > sizeof(value));
+		value = ptrType & DW_EH_PE_signed ? get_sleb128(&ptr.p8, end)
+		    : get_uleb128(&ptr.p8, end);
+		if ((const void *)ptr.p8 > end)
+			return 0;
+		break;
+	default:
+		return 0;
+	}
+	switch (ptrType & DW_EH_PE_ADJUST) {
+	case DW_EH_PE_abs:
+		break;
+	case DW_EH_PE_pcrel:
+		value += (unsigned long)*pLoc;
+		break;
+	default:
+		return 0;
+	}
+	if ((ptrType & DW_EH_PE_indirect)
+	    && __get_user(value, (unsigned long __user *)value))
+		return 0;
+	*pLoc = ptr.p8;
+
+	return value;
+}
+
+static signed fde_pointer_type(const u32 *cie)
+{
+	const u8 *ptr = (const u8 *)(cie + 2);
+	unsigned int version = *ptr;
+
+	if (*++ptr) {
+		const char *aug;
+		const u8 *end = (const u8 *)(cie + 1) + *cie;
+		uleb128_t len;
+
+		/* check if augmentation size is first (and thus present) */
+		if (*ptr != 'z')
+			return -1;
+
+		/* check if augmentation string is nul-terminated */
+		aug = (const void *)ptr;
+		ptr = memchr(aug, 0, end - ptr);
+		if (ptr == NULL)
+			return -1;
+
+		++ptr;		/* skip terminator */
+		get_uleb128(&ptr, end);	/* skip code alignment */
+		get_sleb128(&ptr, end);	/* skip data alignment */
+		/* skip return address column */
+		version <= 1 ? (void) ++ptr : (void)get_uleb128(&ptr, end);
+		len = get_uleb128(&ptr, end);	/* augmentation length */
+
+		if (ptr + len < ptr || ptr + len > end)
+			return -1;
+
+		end = ptr + len;
+		while (*++aug) {
+			if (ptr >= end)
+				return -1;
+			switch (*aug) {
+			case 'L':
+				++ptr;
+				break;
+			case 'P':{
+					signed ptrType = *ptr++;
+
+					if (!read_pointer(&ptr, end, ptrType)
+					    || ptr > end)
+						return -1;
+				}
+				break;
+			case 'R':
+				return *ptr;
+			default:
+				return -1;
+			}
+		}
+	}
+	return DW_EH_PE_native | DW_EH_PE_abs;
+}
+
+static int advance_loc(unsigned long delta, struct unwind_state *state)
+{
+	state->loc += delta * state->codeAlign;
+
+	/* FIXME_Rajesh: Probably we are defining for the initial range as well;
+	   return delta > 0;
+	 */
+	unw_debug("delta %3lu => loc 0x%lx: ", delta, state->loc);
+	return 1;
+}
+
+static void set_rule(uleb128_t reg, enum item_location where, uleb128_t value,
+		     struct unwind_state *state)
+{
+	if (reg < ARRAY_SIZE(state->regs)) {
+		state->regs[reg].where = where;
+		state->regs[reg].value = value;
+
+#ifdef UNWIND_DEBUG
+		unw_debug("r%lu: ", reg);
+		switch (where) {
+		case Nowhere:
+			unw_debug("s ");
+			break;
+		case Memory:
+			unw_debug("c(%lu) ", value);
+			break;
+		case Register:
+			unw_debug("r(%lu) ", value);
+			break;
+		case Value:
+			unw_debug("v(%lu) ", value);
+			break;
+		default:
+			break;
+		}
+#endif
+	}
+}
+
+static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
+		      signed ptrType, struct unwind_state *state)
+{
+	union {
+		const u8 *p8;
+		const u16 *p16;
+		const u32 *p32;
+	} ptr;
+	int result = 1;
+	u8 opcode;
+
+	if (start != state->cieStart) {
+		state->loc = state->org;
+		result =
+		    processCFI(state->cieStart, state->cieEnd, 0, ptrType,
+			       state);
+		if (targetLoc == 0 && state->label == NULL)
+			return result;
+	}
+	for (ptr.p8 = start; result && ptr.p8 < end;) {
+		switch (*ptr.p8 >> 6) {
+			uleb128_t value;
+
+		case 0:
+			opcode = *ptr.p8++;
+
+			switch (opcode) {
+			case DW_CFA_nop:
+				unw_debug("cfa nop ");
+				break;
+			case DW_CFA_set_loc:
+				state->loc = read_pointer(&ptr.p8, end,
+							  ptrType);
+				if (state->loc == 0)
+					result = 0;
+				unw_debug("cfa_set_loc: 0x%lx ", state->loc);
+				break;
+			case DW_CFA_advance_loc1:
+				unw_debug("\ncfa advance loc1:");
+				result = ptr.p8 < end
+				    && advance_loc(*ptr.p8++, state);
+				break;
+			case DW_CFA_advance_loc2:
+				value = *ptr.p8++;
+				value += *ptr.p8++ << 8;
+				unw_debug("\ncfa advance loc2:");
+				result = ptr.p8 <= end + 2
+				    /* && advance_loc(*ptr.p16++, state); */
+				    && advance_loc(value, state);
+				break;
+			case DW_CFA_advance_loc4:
+				unw_debug("\ncfa advance loc4:");
+				result = ptr.p8 <= end + 4
+				    && advance_loc(*ptr.p32++, state);
+				break;
+			case DW_CFA_offset_extended:
+				value = get_uleb128(&ptr.p8, end);
+				unw_debug("cfa_offset_extended: ");
+				set_rule(value, Memory,
+					 get_uleb128(&ptr.p8, end), state);
+				break;
+			case DW_CFA_val_offset:
+				value = get_uleb128(&ptr.p8, end);
+				set_rule(value, Value,
+					 get_uleb128(&ptr.p8, end), state);
+				break;
+			case DW_CFA_offset_extended_sf:
+				value = get_uleb128(&ptr.p8, end);
+				set_rule(value, Memory,
+					 get_sleb128(&ptr.p8, end), state);
+				break;
+			case DW_CFA_val_offset_sf:
+				value = get_uleb128(&ptr.p8, end);
+				set_rule(value, Value,
+					 get_sleb128(&ptr.p8, end), state);
+				break;
+			case DW_CFA_restore_extended:
+				unw_debug("cfa_restore_extended: ");
+			case DW_CFA_undefined:
+				unw_debug("cfa_undefined: ");
+			case DW_CFA_same_value:
+				unw_debug("cfa_same_value: ");
+				set_rule(get_uleb128(&ptr.p8, end), Nowhere, 0,
+					 state);
+				break;
+			case DW_CFA_register:
+				unw_debug("cfa_register: ");
+				value = get_uleb128(&ptr.p8, end);
+				set_rule(value,
+					 Register,
+					 get_uleb128(&ptr.p8, end), state);
+				break;
+			case DW_CFA_remember_state:
+				unw_debug("cfa_remember_state: ");
+				if (ptr.p8 == state->label) {
+					state->label = NULL;
+					return 1;
+				}
+				if (state->stackDepth >= MAX_STACK_DEPTH)
+					return 0;
+				state->stack[state->stackDepth++] = ptr.p8;
+				break;
+			case DW_CFA_restore_state:
+				unw_debug("cfa_restore_state: ");
+				if (state->stackDepth) {
+					const uleb128_t loc = state->loc;
+					const u8 *label = state->label;
+
+					state->label =
+					    state->stack[state->stackDepth - 1];
+					memcpy(&state->cfa, &badCFA,
+					       sizeof(state->cfa));
+					memset(state->regs, 0,
+					       sizeof(state->regs));
+					state->stackDepth = 0;
+					result =
+					    processCFI(start, end, 0, ptrType,
+						       state);
+					state->loc = loc;
+					state->label = label;
+				} else
+					return 0;
+				break;
+			case DW_CFA_def_cfa:
+				state->cfa.reg = get_uleb128(&ptr.p8, end);
+				unw_debug("cfa_def_cfa: r%lu ", state->cfa.reg);
+				fallthrough;
+			case DW_CFA_def_cfa_offset:
+				state->cfa.offs = get_uleb128(&ptr.p8, end);
+				unw_debug("cfa_def_cfa_offset: 0x%lx ",
+					  state->cfa.offs);
+				break;
+			case DW_CFA_def_cfa_sf:
+				state->cfa.reg = get_uleb128(&ptr.p8, end);
+				fallthrough;
+			case DW_CFA_def_cfa_offset_sf:
+				state->cfa.offs = get_sleb128(&ptr.p8, end)
+				    * state->dataAlign;
+				break;
+			case DW_CFA_def_cfa_register:
+				unw_debug("cfa_def_cfa_register: ");
+				state->cfa.reg = get_uleb128(&ptr.p8, end);
+				break;
+				/*todo case DW_CFA_def_cfa_expression: */
+				/*todo case DW_CFA_expression: */
+				/*todo case DW_CFA_val_expression: */
+			case DW_CFA_GNU_args_size:
+				get_uleb128(&ptr.p8, end);
+				break;
+			case DW_CFA_GNU_negative_offset_extended:
+				value = get_uleb128(&ptr.p8, end);
+				set_rule(value,
+					 Memory,
+					 (uleb128_t) 0 - get_uleb128(&ptr.p8,
+								     end),
+					 state);
+				break;
+			case DW_CFA_GNU_window_save:
+			default:
+				unw_debug("UNKNOWN OPCODE 0x%x\n", opcode);
+				result = 0;
+				break;
+			}
+			break;
+		case 1:
+			unw_debug("\ncfa_adv_loc: ");
+			result = advance_loc(*ptr.p8++ & 0x3f, state);
+			break;
+		case 2:
+			unw_debug("cfa_offset: ");
+			value = *ptr.p8++ & 0x3f;
+			set_rule(value, Memory, get_uleb128(&ptr.p8, end),
+				 state);
+			break;
+		case 3:
+			unw_debug("cfa_restore: ");
+			set_rule(*ptr.p8++ & 0x3f, Nowhere, 0, state);
+			break;
+		}
+
+		if (ptr.p8 > end)
+			result = 0;
+		if (result && targetLoc != 0 && targetLoc < state->loc)
+			return 1;
+	}
+
+	return result && ptr.p8 == end && (targetLoc == 0 || (
+		/*todo While in theory this should apply, gcc in practice omits
+		  everything past the function prolog, and hence the location
+		  never reaches the end of the function.
+		targetLoc < state->loc && */  state->label == NULL));
+}
+
+/* Unwind to previous to frame.  Returns 0 if successful, negative
+ * number in case of an error. */
+int arc_unwind(struct unwind_frame_info *frame)
+{
+#define FRAME_REG(r, t) (((t *)frame)[reg_info[r].offs])
+	const u32 *fde = NULL, *cie = NULL;
+	const u8 *ptr = NULL, *end = NULL;
+	unsigned long pc = UNW_PC(frame) - frame->call_frame;
+	unsigned long startLoc = 0, endLoc = 0, cfa;
+	unsigned int i;
+	signed ptrType = -1;
+	uleb128_t retAddrReg = 0;
+	const struct unwind_table *table;
+	struct unwind_state state;
+	unsigned long *fptr;
+	unsigned long addr;
+
+	unw_debug("\n\nUNWIND FRAME:\n");
+	unw_debug("PC: 0x%lx BLINK: 0x%lx, SP: 0x%lx, FP: 0x%x\n",
+		  UNW_PC(frame), UNW_BLINK(frame), UNW_SP(frame),
+		  UNW_FP(frame));
+
+	if (UNW_PC(frame) == 0)
+		return -EINVAL;
+
+#ifdef UNWIND_DEBUG
+	{
+		unsigned long *sptr = (unsigned long *)UNW_SP(frame);
+		unw_debug("\nStack Dump:\n");
+		for (i = 0; i < 20; i++, sptr++)
+			unw_debug("0x%p:  0x%lx\n", sptr, *sptr);
+		unw_debug("\n");
+	}
+#endif
+
+	table = find_table(pc);
+	if (table != NULL
+	    && !(table->size & (sizeof(*fde) - 1))) {
+		const u8 *hdr = table->header;
+		unsigned long tableSize;
+
+		smp_rmb();
+		if (hdr && hdr[0] == 1) {
+			switch (hdr[3] & DW_EH_PE_FORM) {
+			case DW_EH_PE_native:
+				tableSize = sizeof(unsigned long);
+				break;
+			case DW_EH_PE_data2:
+				tableSize = 2;
+				break;
+			case DW_EH_PE_data4:
+				tableSize = 4;
+				break;
+			case DW_EH_PE_data8:
+				tableSize = 8;
+				break;
+			default:
+				tableSize = 0;
+				break;
+			}
+			ptr = hdr + 4;
+			end = hdr + table->hdrsz;
+			if (tableSize && read_pointer(&ptr, end, hdr[1])
+			    == (unsigned long)table->address
+			    && (i = read_pointer(&ptr, end, hdr[2])) > 0
+			    && i == (end - ptr) / (2 * tableSize)
+			    && !((end - ptr) % (2 * tableSize))) {
+				do {
+					const u8 *cur =
+					    ptr + (i / 2) * (2 * tableSize);
+
+					startLoc = read_pointer(&cur,
+								cur + tableSize,
+								hdr[3]);
+					if (pc < startLoc)
+						i /= 2;
+					else {
+						ptr = cur - tableSize;
+						i = (i + 1) / 2;
+					}
+				} while (startLoc && i > 1);
+				if (i == 1
+				    && (startLoc = read_pointer(&ptr,
+								ptr + tableSize,
+								hdr[3])) != 0
+				    && pc >= startLoc)
+					fde = (void *)read_pointer(&ptr,
+								   ptr +
+								   tableSize,
+								   hdr[3]);
+			}
+		}
+
+		if (fde != NULL) {
+			cie = cie_for_fde(fde, table);
+			ptr = (const u8 *)(fde + 2);
+			if (cie != NULL
+			    && cie != &bad_cie
+			    && cie != &not_fde
+			    && (ptrType = fde_pointer_type(cie)) >= 0
+			    && read_pointer(&ptr,
+					    (const u8 *)(fde + 1) + *fde,
+					    ptrType) == startLoc) {
+				if (!(ptrType & DW_EH_PE_indirect))
+					ptrType &=
+					    DW_EH_PE_FORM | DW_EH_PE_signed;
+				endLoc =
+				    startLoc + read_pointer(&ptr,
+							    (const u8 *)(fde +
+									 1) +
+							    *fde, ptrType);
+				if (pc >= endLoc) {
+					fde = NULL;
+					cie = NULL;
+				}
+			} else {
+				fde = NULL;
+				cie = NULL;
+			}
+		}
+	}
+	if (cie != NULL) {
+		memset(&state, 0, sizeof(state));
+		state.cieEnd = ptr;	/* keep here temporarily */
+		ptr = (const u8 *)(cie + 2);
+		end = (const u8 *)(cie + 1) + *cie;
+		frame->call_frame = 1;
+		if (*++ptr) {
+			/* check if augmentation size is first (thus present) */
+			if (*ptr == 'z') {
+				while (++ptr < end && *ptr) {
+					switch (*ptr) {
+					/* chk for ignorable or already handled
+					 * nul-terminated augmentation string */
+					case 'L':
+					case 'P':
+					case 'R':
+						continue;
+					case 'S':
+						frame->call_frame = 0;
+						continue;
+					default:
+						break;
+					}
+					break;
+				}
+			}
+			if (ptr >= end || *ptr)
+				cie = NULL;
+		}
+		++ptr;
+	}
+	if (cie != NULL) {
+		/* get code alignment factor */
+		state.codeAlign = get_uleb128(&ptr, end);
+		/* get data alignment factor */
+		state.dataAlign = get_sleb128(&ptr, end);
+		if (state.codeAlign == 0 || state.dataAlign == 0 || ptr >= end)
+			cie = NULL;
+		else {
+			retAddrReg =
+			    state.version <= 1 ? *ptr++ : get_uleb128(&ptr,
+								      end);
+			unw_debug("CIE Frame Info:\n");
+			unw_debug("return Address register 0x%lx\n",
+				  retAddrReg);
+			unw_debug("data Align: %ld\n", state.dataAlign);
+			unw_debug("code Align: %lu\n", state.codeAlign);
+			/* skip augmentation */
+			if (((const char *)(cie + 2))[1] == 'z') {
+				uleb128_t augSize = get_uleb128(&ptr, end);
+
+				ptr += augSize;
+			}
+			if (ptr > end || retAddrReg >= ARRAY_SIZE(reg_info)
+			    || REG_INVALID(retAddrReg)
+			    || reg_info[retAddrReg].width !=
+			    sizeof(unsigned long))
+				cie = NULL;
+		}
+	}
+	if (cie != NULL) {
+		state.cieStart = ptr;
+		ptr = state.cieEnd;
+		state.cieEnd = end;
+		end = (const u8 *)(fde + 1) + *fde;
+		/* skip augmentation */
+		if (((const char *)(cie + 2))[1] == 'z') {
+			uleb128_t augSize = get_uleb128(&ptr, end);
+
+			if ((ptr += augSize) > end)
+				fde = NULL;
+		}
+	}
+	if (cie == NULL || fde == NULL) {
+#ifdef CONFIG_FRAME_POINTER
+		unsigned long top, bottom;
+
+		top = STACK_TOP_UNW(frame->task);
+		bottom = STACK_BOTTOM_UNW(frame->task);
+#if FRAME_RETADDR_OFFSET < 0
+		if (UNW_SP(frame) < top && UNW_FP(frame) <= UNW_SP(frame)
+		    && bottom < UNW_FP(frame)
+#else
+		if (UNW_SP(frame) > top && UNW_FP(frame) >= UNW_SP(frame)
+		    && bottom > UNW_FP(frame)
+#endif
+		    && !((UNW_SP(frame) | UNW_FP(frame))
+			 & (sizeof(unsigned long) - 1))) {
+			unsigned long link;
+
+			if (!__get_user(link, (unsigned long *)
+					(UNW_FP(frame) + FRAME_LINK_OFFSET))
+#if FRAME_RETADDR_OFFSET < 0
+			    && link > bottom && link < UNW_FP(frame)
+#else
+			    && link > UNW_FP(frame) && link < bottom
+#endif
+			    && !(link & (sizeof(link) - 1))
+			    && !__get_user(UNW_PC(frame),
+					   (unsigned long *)(UNW_FP(frame)
+						+ FRAME_RETADDR_OFFSET)))
+			{
+				UNW_SP(frame) =
+				    UNW_FP(frame) + FRAME_RETADDR_OFFSET
+#if FRAME_RETADDR_OFFSET < 0
+				    -
+#else
+				    +
+#endif
+				    sizeof(UNW_PC(frame));
+				UNW_FP(frame) = link;
+				return 0;
+			}
+		}
+#endif
+		return -ENXIO;
+	}
+	state.org = startLoc;
+	memcpy(&state.cfa, &badCFA, sizeof(state.cfa));
+
+	unw_debug("\nProcess instructions\n");
+
+	/* process instructions
+	 * For ARC, we optimize by having blink(retAddrReg) with
+	 * the sameValue in the leaf function, so we should not check
+	 * state.regs[retAddrReg].where == Nowhere
+	 */
+	if (!processCFI(ptr, end, pc, ptrType, &state)
+	    || state.loc > endLoc
+/*	   || state.regs[retAddrReg].where == Nowhere */
+	    || state.cfa.reg >= ARRAY_SIZE(reg_info)
+	    || reg_info[state.cfa.reg].width != sizeof(unsigned long)
+	    || state.cfa.offs % sizeof(unsigned long))
+		return -EIO;
+
+#ifdef UNWIND_DEBUG
+	unw_debug("\n");
+
+	unw_debug("\nRegister State Based on the rules parsed from FDE:\n");
+	for (i = 0; i < ARRAY_SIZE(state.regs); ++i) {
+
+		if (REG_INVALID(i))
+			continue;
+
+		switch (state.regs[i].where) {
+		case Nowhere:
+			break;
+		case Memory:
+			unw_debug(" r%d: c(%lu),", i, state.regs[i].value);
+			break;
+		case Register:
+			unw_debug(" r%d: r(%lu),", i, state.regs[i].value);
+			break;
+		case Value:
+			unw_debug(" r%d: v(%lu),", i, state.regs[i].value);
+			break;
+		}
+	}
+
+	unw_debug("\n");
+#endif
+
+	/* update frame */
+	if (frame->call_frame
+	    && !UNW_DEFAULT_RA(state.regs[retAddrReg], state.dataAlign))
+		frame->call_frame = 0;
+	cfa = FRAME_REG(state.cfa.reg, unsigned long) + state.cfa.offs;
+	startLoc = min_t(unsigned long, UNW_SP(frame), cfa);
+	endLoc = max_t(unsigned long, UNW_SP(frame), cfa);
+	if (STACK_LIMIT(startLoc) != STACK_LIMIT(endLoc)) {
+		startLoc = min(STACK_LIMIT(cfa), cfa);
+		endLoc = max(STACK_LIMIT(cfa), cfa);
+	}
+
+	unw_debug("\nCFA reg: 0x%lx, offset: 0x%lx =>  0x%lx\n",
+		  state.cfa.reg, state.cfa.offs, cfa);
+
+	for (i = 0; i < ARRAY_SIZE(state.regs); ++i) {
+		if (REG_INVALID(i)) {
+			if (state.regs[i].where == Nowhere)
+				continue;
+			return -EIO;
+		}
+		switch (state.regs[i].where) {
+		default:
+			break;
+		case Register:
+			if (state.regs[i].value >= ARRAY_SIZE(reg_info)
+			    || REG_INVALID(state.regs[i].value)
+			    || reg_info[i].width >
+			    reg_info[state.regs[i].value].width)
+				return -EIO;
+			switch (reg_info[state.regs[i].value].width) {
+			case sizeof(u8):
+				state.regs[i].value =
+				FRAME_REG(state.regs[i].value, const u8);
+				break;
+			case sizeof(u16):
+				state.regs[i].value =
+				FRAME_REG(state.regs[i].value, const u16);
+				break;
+			case sizeof(u32):
+				state.regs[i].value =
+				FRAME_REG(state.regs[i].value, const u32);
+				break;
+#ifdef CONFIG_64BIT
+			case sizeof(u64):
+				state.regs[i].value =
+				FRAME_REG(state.regs[i].value, const u64);
+				break;
+#endif
+			default:
+				return -EIO;
+			}
+			break;
+		}
+	}
+
+	unw_debug("\nRegister state after evaluation with realtime Stack:\n");
+	fptr = (unsigned long *)(&frame->regs);
+	for (i = 0; i < ARRAY_SIZE(state.regs); ++i, fptr++) {
+
+		if (REG_INVALID(i))
+			continue;
+		switch (state.regs[i].where) {
+		case Nowhere:
+			if (reg_info[i].width != sizeof(UNW_SP(frame))
+			    || &FRAME_REG(i, __typeof__(UNW_SP(frame)))
+			    != &UNW_SP(frame))
+				continue;
+			UNW_SP(frame) = cfa;
+			break;
+		case Register:
+			switch (reg_info[i].width) {
+			case sizeof(u8):
+				FRAME_REG(i, u8) = state.regs[i].value;
+				break;
+			case sizeof(u16):
+				FRAME_REG(i, u16) = state.regs[i].value;
+				break;
+			case sizeof(u32):
+				FRAME_REG(i, u32) = state.regs[i].value;
+				break;
+#ifdef CONFIG_64BIT
+			case sizeof(u64):
+				FRAME_REG(i, u64) = state.regs[i].value;
+				break;
+#endif
+			default:
+				return -EIO;
+			}
+			break;
+		case Value:
+			if (reg_info[i].width != sizeof(unsigned long))
+				return -EIO;
+			FRAME_REG(i, unsigned long) = cfa + state.regs[i].value
+			    * state.dataAlign;
+			break;
+		case Memory:
+			addr = cfa + state.regs[i].value * state.dataAlign;
+
+			if ((state.regs[i].value * state.dataAlign)
+			    % sizeof(unsigned long)
+			    || addr < startLoc
+			    || addr + sizeof(unsigned long) < addr
+			    || addr + sizeof(unsigned long) > endLoc)
+					return -EIO;
+
+			switch (reg_info[i].width) {
+			case sizeof(u8):
+				__get_user(FRAME_REG(i, u8),
+					   (u8 __user *)addr);
+				break;
+			case sizeof(u16):
+				__get_user(FRAME_REG(i, u16),
+					   (u16 __user *)addr);
+				break;
+			case sizeof(u32):
+				__get_user(FRAME_REG(i, u32),
+					   (u32 __user *)addr);
+				break;
+#ifdef CONFIG_64BIT
+			case sizeof(u64):
+				__get_user(FRAME_REG(i, u64),
+					   (u64 __user *)addr);
+				break;
+#endif
+			default:
+				return -EIO;
+			}
+
+			break;
+		}
+		unw_debug("r%d: 0x%lx ", i, *fptr);
+	}
+
+	return 0;
+#undef FRAME_REG
+}
+EXPORT_SYMBOL(arc_unwind);
diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
new file mode 100644
index 000000000..529ae50f9
--- /dev/null
+++ b/arch/arc/kernel/vmlinux.lds.S
@@ -0,0 +1,156 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
+
+OUTPUT_ARCH(arc)
+ENTRY(res_service)
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+jiffies = jiffies_64 + 4;
+#else
+jiffies = jiffies_64;
+#endif
+
+SECTIONS
+{
+	/*
+	 * ICCM starts at 0x8000_0000. So if kernel is relocated to some other
+	 * address, make sure peripheral at 0x8z doesn't clash with ICCM
+	 * Essentially vector is also in ICCM.
+	 */
+
+	. = CONFIG_LINUX_LINK_BASE;
+
+	_int_vec_base_lds = .;
+	.vector : {
+		*(.vector)
+		. = ALIGN(PAGE_SIZE);
+	}
+
+#ifdef CONFIG_ARC_HAS_ICCM
+	.text.arcfp : {
+		*(.text.arcfp)
+		. = ALIGN(CONFIG_ARC_ICCM_SZ * 1024);
+	}
+#endif
+
+	/*
+	 * The reason for having a seperate subsection .init.ramfs is to
+	 * prevent objump from including it in kernel dumps
+	 *
+	 * Reason for having .init.ramfs above .init is to make sure that the
+	 * binary blob is tucked away to one side, reducing the displacement
+	 * between .init.text and .text, avoiding any possible relocation
+	 * errors because of calls from .init.text to .text
+	 * Yes such calls do exist. e.g.
+	 *	decompress_inflate.c:gunzip( ) -> zlib_inflate_workspace( )
+	 */
+
+	__init_begin = .;
+
+	.init.ramfs : { INIT_RAM_FS }
+
+	. = ALIGN(PAGE_SIZE);
+
+	HEAD_TEXT_SECTION
+	INIT_TEXT_SECTION(L1_CACHE_BYTES)
+
+	/* INIT_DATA_SECTION open-coded: special INIT_RAM_FS handling */
+	.init.data : {
+		INIT_DATA
+		INIT_SETUP(L1_CACHE_BYTES)
+		INIT_CALLS
+		CON_INITCALL
+	}
+
+	.init.arch.info : {
+		__arch_info_begin = .;
+		*(.arch.info.init)
+		__arch_info_end = .;
+	}
+
+	PERCPU_SECTION(L1_CACHE_BYTES)
+
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+
+	.text : {
+		_text = .;
+		_stext = .;
+		TEXT_TEXT
+		SCHED_TEXT
+		CPUIDLE_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
+		*(.fixup)
+		*(.gnu.warning)
+	}
+	EXCEPTION_TABLE(L1_CACHE_BYTES)
+	_etext = .;
+
+	_sdata = .;
+	RO_DATA(PAGE_SIZE)
+
+	/*
+	 * 1. this is .data essentially
+	 * 2. THREAD_SIZE for init.task, must be kernel-stk sz aligned
+	 */
+	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+
+	_edata = .;
+
+	BSS_SECTION(4, 4, 4)
+
+#ifdef CONFIG_ARC_DW2_UNWIND
+	. = ALIGN(PAGE_SIZE);
+	.eh_frame  : {
+		__start_unwind = .;
+		*(.eh_frame)
+		__end_unwind = .;
+	}
+#else
+	/DISCARD/ : {	*(.eh_frame) }
+#endif
+
+	. = ALIGN(PAGE_SIZE);
+	_end = . ;
+
+	STABS_DEBUG
+	ELF_DETAILS
+	DISCARDS
+
+	.arcextmap 0 : {
+		*(.gnu.linkonce.arcextmap.*)
+		*(.arcextmap.*)
+	}
+
+#ifndef CONFIG_DEBUG_INFO
+	/DISCARD/ : { *(.debug_frame) }
+	/DISCARD/ : { *(.debug_aranges) }
+	/DISCARD/ : { *(.debug_pubnames) }
+	/DISCARD/ : { *(.debug_info) }
+	/DISCARD/ : { *(.debug_abbrev) }
+	/DISCARD/ : { *(.debug_line) }
+	/DISCARD/ : { *(.debug_str) }
+	/DISCARD/ : { *(.debug_loc) }
+	/DISCARD/ : { *(.debug_macinfo) }
+	/DISCARD/ : { *(.debug_ranges) }
+#endif
+
+#ifdef CONFIG_ARC_HAS_DCCM
+	. = CONFIG_ARC_DCCM_BASE;
+	__arc_dccm_base = .;
+	.data.arcfp : {
+		*(.data.arcfp)
+	}
+	. = ALIGN(CONFIG_ARC_DCCM_SZ * 1024);
+#endif
+}
diff --git a/arch/arc/lib/Makefile b/arch/arc/lib/Makefile
new file mode 100644
index 000000000..30158ae69
--- /dev/null
+++ b/arch/arc/lib/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+
+lib-y	:= strchr-700.o strcpy-700.o strlen.o memcmp.o
+
+lib-$(CONFIG_ISA_ARCOMPACT)	+= memcpy-700.o memset.o strcmp.o
+lib-$(CONFIG_ISA_ARCV2)		+= memset-archs.o strcmp-archs.o
+
+ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
+lib-$(CONFIG_ISA_ARCV2)		+=memcpy-archs-unaligned.o
+else
+lib-$(CONFIG_ISA_ARCV2)		+=memcpy-archs.o
+endif
diff --git a/arch/arc/lib/memcmp.S b/arch/arc/lib/memcmp.S
new file mode 100644
index 000000000..d6dc5e9bc
--- /dev/null
+++ b/arch/arc/lib/memcmp.S
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/linkage.h>
+
+#ifdef __LITTLE_ENDIAN__
+#define WORD2 r2
+#define SHIFT r3
+#else /* BIG ENDIAN */
+#define WORD2 r3
+#define SHIFT r2
+#endif
+
+ENTRY_CFI(memcmp)
+	or	r12,r0,r1
+	asl_s	r12,r12,30
+	sub	r3,r2,1
+	brls	r2,r12,.Lbytewise
+	ld	r4,[r0,0]
+	ld	r5,[r1,0]
+	lsr.f	lp_count,r3,3
+#ifdef CONFIG_ISA_ARCV2
+	/* In ARCv2 a branch can't be the last instruction in a zero overhead
+	 * loop.
+	 * So we move the branch to the start of the loop, duplicate it
+	 * after the end, and set up r12 so that the branch isn't taken
+	 *  initially.
+	 */
+	mov_s	r12,WORD2
+	lpne	.Loop_end
+	brne	WORD2,r12,.Lodd
+	ld	WORD2,[r0,4]
+#else
+	lpne	.Loop_end
+	ld_s	WORD2,[r0,4]
+#endif
+	ld_s	r12,[r1,4]
+	brne	r4,r5,.Leven
+	ld.a	r4,[r0,8]
+	ld.a	r5,[r1,8]
+#ifdef CONFIG_ISA_ARCV2
+.Loop_end:
+	brne	WORD2,r12,.Lodd
+#else
+	brne	WORD2,r12,.Lodd
+.Loop_end:
+#endif
+	asl_s	SHIFT,SHIFT,3
+	bhs_s	.Last_cmp
+	brne	r4,r5,.Leven
+	ld	r4,[r0,4]
+	ld	r5,[r1,4]
+#ifdef __LITTLE_ENDIAN__
+	nop_s
+	; one more load latency cycle
+.Last_cmp:
+	xor	r0,r4,r5
+	bset	r0,r0,SHIFT
+	sub_s	r1,r0,1
+	bic_s	r1,r1,r0
+	norm	r1,r1
+	b.d	.Leven_cmp
+	and	r1,r1,24
+.Leven:
+	xor	r0,r4,r5
+	sub_s	r1,r0,1
+	bic_s	r1,r1,r0
+	norm	r1,r1
+	; slow track insn
+	and	r1,r1,24
+.Leven_cmp:
+	asl	r2,r4,r1
+	asl	r12,r5,r1
+	lsr_s	r2,r2,1
+	lsr_s	r12,r12,1
+	j_s.d	[blink]
+	sub	r0,r2,r12
+	.balign	4
+.Lodd:
+	xor	r0,WORD2,r12
+	sub_s	r1,r0,1
+	bic_s	r1,r1,r0
+	norm	r1,r1
+	; slow track insn
+	and	r1,r1,24
+	asl_s	r2,r2,r1
+	asl_s	r12,r12,r1
+	lsr_s	r2,r2,1
+	lsr_s	r12,r12,1
+	j_s.d	[blink]
+	sub	r0,r2,r12
+#else /* BIG ENDIAN */
+.Last_cmp:
+	neg_s	SHIFT,SHIFT
+	lsr	r4,r4,SHIFT
+	lsr	r5,r5,SHIFT
+	; slow track insn
+.Leven:
+	sub.f	r0,r4,r5
+	mov.ne	r0,1
+	j_s.d	[blink]
+	bset.cs	r0,r0,31
+.Lodd:
+	cmp_s	WORD2,r12
+	mov_s	r0,1
+	j_s.d	[blink]
+	bset.cs	r0,r0,31
+#endif /* ENDIAN */
+	.balign	4
+.Lbytewise:
+	breq	r2,0,.Lnil
+	ldb	r4,[r0,0]
+	ldb	r5,[r1,0]
+	lsr.f	lp_count,r3
+#ifdef CONFIG_ISA_ARCV2
+	mov	r12,r3
+	lpne	.Lbyte_end
+	brne	r3,r12,.Lbyte_odd
+#else
+	lpne	.Lbyte_end
+#endif
+	ldb_s	r3,[r0,1]
+	ldb	r12,[r1,1]
+	brne	r4,r5,.Lbyte_even
+	ldb.a	r4,[r0,2]
+	ldb.a	r5,[r1,2]
+#ifdef CONFIG_ISA_ARCV2
+.Lbyte_end:
+	brne	r3,r12,.Lbyte_odd
+#else
+	brne	r3,r12,.Lbyte_odd
+.Lbyte_end:
+#endif
+	bcc	.Lbyte_even
+	brne	r4,r5,.Lbyte_even
+	ldb_s	r3,[r0,1]
+	ldb_s	r12,[r1,1]
+.Lbyte_odd:
+	j_s.d	[blink]
+	sub	r0,r3,r12
+.Lbyte_even:
+	j_s.d	[blink]
+	sub	r0,r4,r5
+.Lnil:
+	j_s.d	[blink]
+	mov	r0,0
+END_CFI(memcmp)
diff --git a/arch/arc/lib/memcpy-700.S b/arch/arc/lib/memcpy-700.S
new file mode 100644
index 000000000..f2e239e21
--- /dev/null
+++ b/arch/arc/lib/memcpy-700.S
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/linkage.h>
+
+ENTRY_CFI(memcpy)
+	or	r3,r0,r1
+	asl_s	r3,r3,30
+	mov_s	r5,r0
+	brls.d	r2,r3,.Lcopy_bytewise
+	sub.f	r3,r2,1
+	ld_s	r12,[r1,0]
+	asr.f	lp_count,r3,3
+	bbit0.d	r3,2,.Lnox4
+	bmsk_s	r2,r2,1
+	st.ab	r12,[r5,4]
+	ld.a	r12,[r1,4]
+.Lnox4:
+	lppnz	.Lendloop
+	ld_s	r3,[r1,4]
+	st.ab	r12,[r5,4]
+	ld.a	r12,[r1,8]
+	st.ab	r3,[r5,4]
+.Lendloop:
+	breq	r2,0,.Last_store
+	ld	r3,[r5,0]
+#ifdef __LITTLE_ENDIAN__
+	add3	r2,-1,r2
+	; uses long immediate
+	xor_s	r12,r12,r3
+	bmsk	r12,r12,r2
+    xor_s	r12,r12,r3
+#else /* BIG ENDIAN */
+	sub3	r2,31,r2
+	; uses long immediate
+        xor_s	r3,r3,r12
+        bmsk	r3,r3,r2
+        xor_s	r12,r12,r3
+#endif /* ENDIAN */
+.Last_store:
+	j_s.d	[blink]
+	st	r12,[r5,0]
+
+	.balign	4
+.Lcopy_bytewise:
+	jcs	[blink]
+	ldb_s	r12,[r1,0]
+	lsr.f	lp_count,r3
+	bhs_s	.Lnox1
+	stb.ab	r12,[r5,1]
+	ldb.a	r12,[r1,1]
+.Lnox1:
+	lppnz	.Lendbloop
+	ldb_s	r3,[r1,1]
+	stb.ab	r12,[r5,1]
+	ldb.a	r12,[r1,2]
+	stb.ab	r3,[r5,1]
+.Lendbloop:
+	j_s.d	[blink]
+	stb	r12,[r5,0]
+END_CFI(memcpy)
diff --git a/arch/arc/lib/memcpy-archs-unaligned.S b/arch/arc/lib/memcpy-archs-unaligned.S
new file mode 100644
index 000000000..28993a73f
--- /dev/null
+++ b/arch/arc/lib/memcpy-archs-unaligned.S
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * ARCv2 memcpy implementation optimized for unaligned memory access using.
+ *
+ * Copyright (C) 2019 Synopsys
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+
+#include <linux/linkage.h>
+
+#ifdef CONFIG_ARC_HAS_LL64
+# define LOADX(DST,RX)		ldd.ab	DST, [RX, 8]
+# define STOREX(SRC,RX)		std.ab	SRC, [RX, 8]
+# define ZOLSHFT		5
+# define ZOLAND			0x1F
+#else
+# define LOADX(DST,RX)		ld.ab	DST, [RX, 4]
+# define STOREX(SRC,RX)		st.ab	SRC, [RX, 4]
+# define ZOLSHFT		4
+# define ZOLAND			0xF
+#endif
+
+ENTRY_CFI(memcpy)
+	mov	r3, r0		; don;t clobber ret val
+
+	lsr.f	lp_count, r2, ZOLSHFT
+	lpnz	@.Lcopy32_64bytes
+	;; LOOP START
+	LOADX	(r6, r1)
+	LOADX	(r8, r1)
+	LOADX	(r10, r1)
+	LOADX	(r4, r1)
+	STOREX	(r6, r3)
+	STOREX	(r8, r3)
+	STOREX	(r10, r3)
+	STOREX	(r4, r3)
+.Lcopy32_64bytes:
+
+	and.f	lp_count, r2, ZOLAND ;Last remaining 31 bytes
+	lpnz	@.Lcopyremainingbytes
+	;; LOOP START
+	ldb.ab	r5, [r1, 1]
+	stb.ab	r5, [r3, 1]
+.Lcopyremainingbytes:
+
+	j	[blink]
+END_CFI(memcpy)
diff --git a/arch/arc/lib/memcpy-archs.S b/arch/arc/lib/memcpy-archs.S
new file mode 100644
index 000000000..0051a84f6
--- /dev/null
+++ b/arch/arc/lib/memcpy-archs.S
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/linkage.h>
+
+#ifdef __LITTLE_ENDIAN__
+# define SHIFT_1(RX,RY,IMM)	asl	RX, RY, IMM	; <<
+# define SHIFT_2(RX,RY,IMM)	lsr	RX, RY, IMM	; >>
+# define MERGE_1(RX,RY,IMM)	asl	RX, RY, IMM
+# define MERGE_2(RX,RY,IMM)
+# define EXTRACT_1(RX,RY,IMM)	and	RX, RY, 0xFFFF
+# define EXTRACT_2(RX,RY,IMM)	lsr	RX, RY, IMM
+#else
+# define SHIFT_1(RX,RY,IMM)	lsr	RX, RY, IMM	; >>
+# define SHIFT_2(RX,RY,IMM)	asl	RX, RY, IMM	; <<
+# define MERGE_1(RX,RY,IMM)	asl	RX, RY, IMM	; <<
+# define MERGE_2(RX,RY,IMM)	asl	RX, RY, IMM	; <<
+# define EXTRACT_1(RX,RY,IMM)	lsr	RX, RY, IMM
+# define EXTRACT_2(RX,RY,IMM)	lsr	RX, RY, 0x08
+#endif
+
+#ifdef CONFIG_ARC_HAS_LL64
+# define LOADX(DST,RX)		ldd.ab	DST, [RX, 8]
+# define STOREX(SRC,RX)		std.ab	SRC, [RX, 8]
+# define ZOLSHFT		5
+# define ZOLAND			0x1F
+#else
+# define LOADX(DST,RX)		ld.ab	DST, [RX, 4]
+# define STOREX(SRC,RX)		st.ab	SRC, [RX, 4]
+# define ZOLSHFT		4
+# define ZOLAND			0xF
+#endif
+
+ENTRY_CFI(memcpy)
+	mov.f	0, r2
+;;; if size is zero
+	jz.d	[blink]
+	mov	r3, r0		; don;t clobber ret val
+
+;;; if size <= 8
+	cmp	r2, 8
+	bls.d	@.Lsmallchunk
+	mov.f	lp_count, r2
+
+	and.f	r4, r0, 0x03
+	rsub	lp_count, r4, 4
+	lpnz	@.Laligndestination
+	;; LOOP BEGIN
+	ldb.ab	r5, [r1,1]
+	sub	r2, r2, 1
+	stb.ab	r5, [r3,1]
+.Laligndestination:
+
+;;; Check the alignment of the source
+	and.f	r4, r1, 0x03
+	bnz.d	@.Lsourceunaligned
+
+;;; CASE 0: Both source and destination are 32bit aligned
+;;; Convert len to Dwords, unfold x4
+	lsr.f	lp_count, r2, ZOLSHFT
+	lpnz	@.Lcopy32_64bytes
+	;; LOOP START
+	LOADX (r6, r1)
+	LOADX (r8, r1)
+	LOADX (r10, r1)
+	LOADX (r4, r1)
+	STOREX (r6, r3)
+	STOREX (r8, r3)
+	STOREX (r10, r3)
+	STOREX (r4, r3)
+.Lcopy32_64bytes:
+
+	and.f	lp_count, r2, ZOLAND ;Last remaining 31 bytes
+.Lsmallchunk:
+	lpnz	@.Lcopyremainingbytes
+	;; LOOP START
+	ldb.ab	r5, [r1,1]
+	stb.ab	r5, [r3,1]
+.Lcopyremainingbytes:
+
+	j	[blink]
+;;; END CASE 0
+
+.Lsourceunaligned:
+	cmp	r4, 2
+	beq.d	@.LunalignedOffby2
+	sub	r2, r2, 1
+
+	bhi.d	@.LunalignedOffby3
+	ldb.ab	r5, [r1, 1]
+
+;;; CASE 1: The source is unaligned, off by 1
+	;; Hence I need to read 1 byte for a 16bit alignment
+	;; and 2bytes to reach 32bit alignment
+	ldh.ab	r6, [r1, 2]
+	sub	r2, r2, 2
+	;; Convert to words, unfold x2
+	lsr.f	lp_count, r2, 3
+	MERGE_1 (r6, r6, 8)
+	MERGE_2 (r5, r5, 24)
+	or	r5, r5, r6
+
+	;; Both src and dst are aligned
+	lpnz	@.Lcopy8bytes_1
+	;; LOOP START
+	ld.ab	r6, [r1, 4]
+	ld.ab	r8, [r1,4]
+
+	SHIFT_1	(r7, r6, 24)
+	or	r7, r7, r5
+	SHIFT_2	(r5, r6, 8)
+
+	SHIFT_1	(r9, r8, 24)
+	or	r9, r9, r5
+	SHIFT_2	(r5, r8, 8)
+
+	st.ab	r7, [r3, 4]
+	st.ab	r9, [r3, 4]
+.Lcopy8bytes_1:
+
+	;; Write back the remaining 16bits
+	EXTRACT_1 (r6, r5, 16)
+	sth.ab	r6, [r3, 2]
+	;; Write back the remaining 8bits
+	EXTRACT_2 (r5, r5, 16)
+	stb.ab	r5, [r3, 1]
+
+	and.f	lp_count, r2, 0x07 ;Last 8bytes
+	lpnz	@.Lcopybytewise_1
+	;; LOOP START
+	ldb.ab	r6, [r1,1]
+	stb.ab	r6, [r3,1]
+.Lcopybytewise_1:
+	j	[blink]
+
+.LunalignedOffby2:
+;;; CASE 2: The source is unaligned, off by 2
+	ldh.ab	r5, [r1, 2]
+	sub	r2, r2, 1
+
+	;; Both src and dst are aligned
+	;; Convert to words, unfold x2
+	lsr.f	lp_count, r2, 3
+#ifdef __BIG_ENDIAN__
+	asl.nz	r5, r5, 16
+#endif
+	lpnz	@.Lcopy8bytes_2
+	;; LOOP START
+	ld.ab	r6, [r1, 4]
+	ld.ab	r8, [r1,4]
+
+	SHIFT_1	(r7, r6, 16)
+	or	r7, r7, r5
+	SHIFT_2	(r5, r6, 16)
+
+	SHIFT_1	(r9, r8, 16)
+	or	r9, r9, r5
+	SHIFT_2	(r5, r8, 16)
+
+	st.ab	r7, [r3, 4]
+	st.ab	r9, [r3, 4]
+.Lcopy8bytes_2:
+
+#ifdef __BIG_ENDIAN__
+	lsr.nz	r5, r5, 16
+#endif
+	sth.ab	r5, [r3, 2]
+
+	and.f	lp_count, r2, 0x07 ;Last 8bytes
+	lpnz	@.Lcopybytewise_2
+	;; LOOP START
+	ldb.ab	r6, [r1,1]
+	stb.ab	r6, [r3,1]
+.Lcopybytewise_2:
+	j	[blink]
+
+.LunalignedOffby3:
+;;; CASE 3: The source is unaligned, off by 3
+;;; Hence, I need to read 1byte for achieve the 32bit alignment
+
+	;; Both src and dst are aligned
+	;; Convert to words, unfold x2
+	lsr.f	lp_count, r2, 3
+#ifdef __BIG_ENDIAN__
+	asl.ne	r5, r5, 24
+#endif
+	lpnz	@.Lcopy8bytes_3
+	;; LOOP START
+	ld.ab	r6, [r1, 4]
+	ld.ab	r8, [r1,4]
+
+	SHIFT_1	(r7, r6, 8)
+	or	r7, r7, r5
+	SHIFT_2	(r5, r6, 24)
+
+	SHIFT_1	(r9, r8, 8)
+	or	r9, r9, r5
+	SHIFT_2	(r5, r8, 24)
+
+	st.ab	r7, [r3, 4]
+	st.ab	r9, [r3, 4]
+.Lcopy8bytes_3:
+
+#ifdef __BIG_ENDIAN__
+	lsr.nz	r5, r5, 24
+#endif
+	stb.ab	r5, [r3, 1]
+
+	and.f	lp_count, r2, 0x07 ;Last 8bytes
+	lpnz	@.Lcopybytewise_3
+	;; LOOP START
+	ldb.ab	r6, [r1,1]
+	stb.ab	r6, [r3,1]
+.Lcopybytewise_3:
+	j	[blink]
+
+END_CFI(memcpy)
diff --git a/arch/arc/lib/memset-archs.S b/arch/arc/lib/memset-archs.S
new file mode 100644
index 000000000..d2e09fece
--- /dev/null
+++ b/arch/arc/lib/memset-archs.S
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/linkage.h>
+#include <asm/cache.h>
+
+/*
+ * The memset implementation below is optimized to use prefetchw and prealloc
+ * instruction in case of CPU with 64B L1 data cache line (L1_CACHE_SHIFT == 6)
+ * If you want to implement optimized memset for other possible L1 data cache
+ * line lengths (32B and 128B) you should rewrite code carefully checking
+ * we don't call any prefetchw/prealloc instruction for L1 cache lines which
+ * don't belongs to memset area.
+ */
+
+#if L1_CACHE_SHIFT == 6
+
+.macro PREALLOC_INSTR	reg, off
+	prealloc	[\reg, \off]
+.endm
+
+.macro PREFETCHW_INSTR	reg, off
+	prefetchw	[\reg, \off]
+.endm
+
+#else
+
+.macro PREALLOC_INSTR	reg, off
+.endm
+
+.macro PREFETCHW_INSTR	reg, off
+.endm
+
+#endif
+
+ENTRY_CFI(memset)
+	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
+	mov.f	0, r2
+;;; if size is zero
+	jz.d	[blink]
+	mov	r3, r0		; don't clobber ret val
+
+;;; if length < 8
+	brls.d.nt	r2, 8, .Lsmallchunk
+	mov.f	lp_count,r2
+
+	and.f	r4, r0, 0x03
+	rsub	lp_count, r4, 4
+	lpnz	@.Laligndestination
+	;; LOOP BEGIN
+	stb.ab	r1, [r3,1]
+	sub	r2, r2, 1
+.Laligndestination:
+
+;;; Destination is aligned
+	and	r1, r1, 0xFF
+	asl	r4, r1, 8
+	or	r4, r4, r1
+	asl	r5, r4, 16
+	or	r5, r5, r4
+	mov	r4, r5
+
+	sub3	lp_count, r2, 8
+	cmp     r2, 64
+	bmsk.hi	r2, r2, 5
+	mov.ls	lp_count, 0
+	add3.hi	r2, r2, 8
+
+;;; Convert len to Dwords, unfold x8
+	lsr.f	lp_count, lp_count, 6
+
+	lpnz	@.Lset64bytes
+	;; LOOP START
+	PREALLOC_INSTR	r3, 64	; alloc next line w/o fetching
+
+#ifdef CONFIG_ARC_HAS_LL64
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+#else
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+#endif
+.Lset64bytes:
+
+	lsr.f	lp_count, r2, 5 ;Last remaining  max 124 bytes
+	lpnz	.Lset32bytes
+	;; LOOP START
+#ifdef CONFIG_ARC_HAS_LL64
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+	std.ab	r4, [r3, 8]
+#else
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+	st.ab	r4, [r3, 4]
+#endif
+.Lset32bytes:
+
+	and.f	lp_count, r2, 0x1F ;Last remaining 31 bytes
+.Lsmallchunk:
+	lpnz	.Lcopy3bytes
+	;; LOOP START
+	stb.ab	r1, [r3, 1]
+.Lcopy3bytes:
+
+	j	[blink]
+
+END_CFI(memset)
+
+ENTRY_CFI(memzero)
+    ; adjust bzero args to memset args
+    mov r2, r1
+    b.d  memset    ;tail call so need to tinker with blink
+    mov r1, 0
+END_CFI(memzero)
diff --git a/arch/arc/lib/memset.S b/arch/arc/lib/memset.S
new file mode 100644
index 000000000..9f35960da
--- /dev/null
+++ b/arch/arc/lib/memset.S
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/linkage.h>
+
+#define SMALL	7 /* Must be at least 6 to deal with alignment/loop issues.  */
+
+ENTRY_CFI(memset)
+	mov_s	r4,r0
+	or	r12,r0,r2
+	bmsk.f	r12,r12,1
+	extb_s	r1,r1
+	asl	r3,r1,8
+	beq.d	.Laligned
+	or_s	r1,r1,r3
+	brls	r2,SMALL,.Ltiny
+	add	r3,r2,r0
+	stb	r1,[r3,-1]
+	bclr_s	r3,r3,0
+	stw	r1,[r3,-2]
+	bmsk.f	r12,r0,1
+	add_s	r2,r2,r12
+	sub.ne	r2,r2,4
+	stb.ab	r1,[r4,1]
+	and	r4,r4,-2
+	stw.ab	r1,[r4,2]
+	and	r4,r4,-4
+.Laligned:	; This code address should be aligned for speed.
+	asl	r3,r1,16
+	lsr.f	lp_count,r2,2
+	or_s	r1,r1,r3
+	lpne	.Loop_end
+	st.ab	r1,[r4,4]
+.Loop_end:
+	j_s	[blink]
+
+	.balign	4
+.Ltiny:
+	mov.f	lp_count,r2
+	lpne	.Ltiny_end
+	stb.ab	r1,[r4,1]
+.Ltiny_end:
+	j_s	[blink]
+END_CFI(memset)
+
+; memzero: @r0 = mem, @r1 = size_t
+; memset:  @r0 = mem, @r1 = char, @r2 = size_t
+
+ENTRY_CFI(memzero)
+    ; adjust bzero args to memset args
+    mov r2, r1
+    mov r1, 0
+    b  memset    ;tail call so need to tinker with blink
+END_CFI(memzero)
diff --git a/arch/arc/lib/strchr-700.S b/arch/arc/lib/strchr-700.S
new file mode 100644
index 000000000..d52e2833f
--- /dev/null
+++ b/arch/arc/lib/strchr-700.S
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/* ARC700 has a relatively long pipeline and branch prediction, so we want
+   to avoid branches that are hard to predict.  On the other hand, the
+   presence of the norm instruction makes it easier to operate on whole
+   words branch-free.  */
+
+#include <linux/linkage.h>
+
+ENTRY_CFI(strchr)
+	extb_s	r1,r1
+	asl	r5,r1,8
+	bmsk	r2,r0,1
+	or	r5,r5,r1
+	mov_s	r3,0x01010101
+	breq.d	r2,r0,.Laligned
+	asl	r4,r5,16
+	sub_s	r0,r0,r2
+	asl	r7,r2,3
+	ld_s	r2,[r0]
+#ifdef __LITTLE_ENDIAN__
+	asl	r7,r3,r7
+#else
+	lsr	r7,r3,r7
+#endif
+	or	r5,r5,r4
+	ror	r4,r3
+	sub	r12,r2,r7
+	bic_s	r12,r12,r2
+	and	r12,r12,r4
+	brne.d	r12,0,.Lfound0_ua
+	xor	r6,r2,r5
+	ld.a	r2,[r0,4]
+	sub	r12,r6,r7
+	bic	r12,r12,r6
+#ifdef __LITTLE_ENDIAN__
+	and	r7,r12,r4
+	breq	r7,0,.Loop ; For speed, we want this branch to be unaligned.
+	b	.Lfound_char ; Likewise this one.
+#else
+	and	r12,r12,r4
+	breq	r12,0,.Loop ; For speed, we want this branch to be unaligned.
+	lsr_s	r12,r12,7
+	bic 	r2,r7,r6
+	b.d	.Lfound_char_b
+	and_s	r2,r2,r12
+#endif
+; /* We require this code address to be unaligned for speed...  */
+.Laligned:
+	ld_s	r2,[r0]
+	or	r5,r5,r4
+	ror	r4,r3
+; /* ... so that this code address is aligned, for itself and ...  */
+.Loop:
+	sub	r12,r2,r3
+	bic_s	r12,r12,r2
+	and	r12,r12,r4
+	brne.d	r12,0,.Lfound0
+	xor	r6,r2,r5
+	ld.a	r2,[r0,4]
+	sub	r12,r6,r3
+	bic	r12,r12,r6
+	and	r7,r12,r4
+	breq	r7,0,.Loop /* ... so that this branch is unaligned.  */
+	; Found searched-for character.  r0 has already advanced to next word.
+#ifdef __LITTLE_ENDIAN__
+/* We only need the information about the first matching byte
+   (i.e. the least significant matching byte) to be exact,
+   hence there is no problem with carry effects.  */
+.Lfound_char:
+	sub	r3,r7,1
+	bic	r3,r3,r7
+	norm	r2,r3
+	sub_s	r0,r0,1
+	asr_s	r2,r2,3
+	j.d	[blink]
+	sub_s	r0,r0,r2
+
+	.balign	4
+.Lfound0_ua:
+	mov	r3,r7
+.Lfound0:
+	sub	r3,r6,r3
+	bic	r3,r3,r6
+	and	r2,r3,r4
+	or_s	r12,r12,r2
+	sub_s	r3,r12,1
+	bic_s	r3,r3,r12
+	norm	r3,r3
+	add_s	r0,r0,3
+	asr_s	r12,r3,3
+	asl.f	0,r2,r3
+	sub_s	r0,r0,r12
+	j_s.d	[blink]
+	mov.pl	r0,0
+#else /* BIG ENDIAN */
+.Lfound_char:
+	lsr	r7,r7,7
+
+	bic	r2,r7,r6
+.Lfound_char_b:
+	norm	r2,r2
+	sub_s	r0,r0,4
+	asr_s	r2,r2,3
+	j.d	[blink]
+	add_s	r0,r0,r2
+
+.Lfound0_ua:
+	mov_s	r3,r7
+.Lfound0:
+	asl_s	r2,r2,7
+	or	r7,r6,r4
+	bic_s	r12,r12,r2
+	sub	r2,r7,r3
+	or	r2,r2,r6
+	bic	r12,r2,r12
+	bic.f	r3,r4,r12
+	norm	r3,r3
+
+	add.pl	r3,r3,1
+	asr_s	r12,r3,3
+	asl.f	0,r2,r3
+	add_s	r0,r0,r12
+	j_s.d	[blink]
+	mov.mi	r0,0
+#endif /* ENDIAN */
+END_CFI(strchr)
diff --git a/arch/arc/lib/strcmp-archs.S b/arch/arc/lib/strcmp-archs.S
new file mode 100644
index 000000000..7cffb3717
--- /dev/null
+++ b/arch/arc/lib/strcmp-archs.S
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/linkage.h>
+
+ENTRY_CFI(strcmp)
+	or	r2, r0, r1
+	bmsk_s	r2, r2, 1
+	brne	r2, 0, @.Lcharloop
+
+;;; s1 and s2 are word aligned
+	ld.ab	r2, [r0, 4]
+
+	mov_s	r12, 0x01010101
+	ror	r11, r12
+	.align  4
+.LwordLoop:
+	ld.ab	r3, [r1, 4]
+	;; Detect NULL char in str1
+	sub	r4, r2, r12
+	ld.ab	r5, [r0, 4]
+	bic	r4, r4, r2
+	and	r4, r4, r11
+	brne.d.nt	r4, 0, .LfoundNULL
+	;; Check if the read locations are the same
+	cmp	r2, r3
+	beq.d	.LwordLoop
+	mov.eq	r2, r5
+
+	;; A match is found, spot it out
+#ifdef __LITTLE_ENDIAN__
+	swape	r3, r3
+	mov_s	r0, 1
+	swape	r2, r2
+#else
+	mov_s	r0, 1
+#endif
+	cmp_s	r2, r3
+	j_s.d	[blink]
+	bset.lo	r0, r0, 31
+
+	.align 4
+.LfoundNULL:
+#ifdef __BIG_ENDIAN__
+	swape	r4, r4
+	swape	r2, r2
+	swape	r3, r3
+#endif
+	;; Find null byte
+	ffs	r0, r4
+	bmsk	r2, r2, r0
+	bmsk	r3, r3, r0
+	swape	r2, r2
+	swape	r3, r3
+	;; make the return value
+	sub.f	r0, r2, r3
+	mov.hi	r0, 1
+	j_s.d	[blink]
+	bset.lo	r0, r0, 31
+
+	.align 4
+.Lcharloop:
+	ldb.ab	r2, [r0, 1]
+	ldb.ab	r3, [r1, 1]
+	nop
+	breq	r2, 0, .Lcmpend
+	breq	r2, r3, .Lcharloop
+
+	.align 4
+.Lcmpend:
+	j_s.d	[blink]
+	sub	r0, r2, r3
+END_CFI(strcmp)
diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S
new file mode 100644
index 000000000..b20c98fb3
--- /dev/null
+++ b/arch/arc/lib/strcmp.S
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/* This is optimized primarily for the ARC700.
+   It would be possible to speed up the loops by one cycle / word
+   respective one cycle / byte by forcing double source 1 alignment, unrolling
+   by a factor of two, and speculatively loading the second word / byte of
+   source 1; however, that would increase the overhead for loop setup / finish,
+   and strcmp might often terminate early.  */
+
+#include <linux/linkage.h>
+
+ENTRY_CFI(strcmp)
+	or	r2,r0,r1
+	bmsk_s	r2,r2,1
+	brne	r2,0,.Lcharloop
+	mov_s	r12,0x01010101
+	ror	r5,r12
+.Lwordloop:
+	ld.ab	r2,[r0,4]
+	ld.ab	r3,[r1,4]
+	nop_s
+	sub	r4,r2,r12
+	bic	r4,r4,r2
+	and	r4,r4,r5
+	brne	r4,0,.Lfound0
+	breq	r2,r3,.Lwordloop
+#ifdef	__LITTLE_ENDIAN__
+	xor	r0,r2,r3	; mask for difference
+	sub_s	r1,r0,1
+	bic_s	r0,r0,r1	; mask for least significant difference bit
+	sub	r1,r5,r0
+	xor	r0,r5,r1	; mask for least significant difference byte
+	and_s	r2,r2,r0
+	and_s	r3,r3,r0
+#endif /* LITTLE ENDIAN */
+	cmp_s	r2,r3
+	mov_s	r0,1
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+
+	.balign	4
+#ifdef __LITTLE_ENDIAN__
+.Lfound0:
+	xor	r0,r2,r3	; mask for difference
+	or	r0,r0,r4	; or in zero indicator
+	sub_s	r1,r0,1
+	bic_s	r0,r0,r1	; mask for least significant difference bit
+	sub	r1,r5,r0
+	xor	r0,r5,r1	; mask for least significant difference byte
+	and_s	r2,r2,r0
+	and_s	r3,r3,r0
+	sub.f	r0,r2,r3
+	mov.hi	r0,1
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+#else /* BIG ENDIAN */
+	/* The zero-detection above can mis-detect 0x01 bytes as zeroes
+	   because of carry-propagateion from a lower significant zero byte.
+	   We can compensate for this by checking that bit0 is zero.
+	   This compensation is not necessary in the step where we
+	   get a low estimate for r2, because in any affected bytes
+	   we already have 0x00 or 0x01, which will remain unchanged
+	   when bit 7 is cleared.  */
+	.balign	4
+.Lfound0:
+	lsr	r0,r4,8
+	lsr_s	r1,r2
+	bic_s	r2,r2,r0	; get low estimate for r2 and get ...
+	bic_s	r0,r0,r1	; <this is the adjusted mask for zeros>
+	or_s	r3,r3,r0	; ... high estimate r3 so that r2 > r3 will ...
+	cmp_s	r3,r2		; ... be independent of trailing garbage
+	or_s	r2,r2,r0	; likewise for r3 > r2
+	bic_s	r3,r3,r0
+	rlc	r0,0		; r0 := r2 > r3 ? 1 : 0
+	cmp_s	r2,r3
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+#endif /* ENDIAN */
+
+	.balign	4
+.Lcharloop:
+	ldb.ab	r2,[r0,1]
+	ldb.ab	r3,[r1,1]
+	nop_s
+	breq	r2,0,.Lcmpend
+	breq	r2,r3,.Lcharloop
+.Lcmpend:
+	j_s.d	[blink]
+	sub	r0,r2,r3
+END_CFI(strcmp)
diff --git a/arch/arc/lib/strcpy-700.S b/arch/arc/lib/strcpy-700.S
new file mode 100644
index 000000000..6e2294d13
--- /dev/null
+++ b/arch/arc/lib/strcpy-700.S
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/* If dst and src are 4 byte aligned, copy 8 bytes at a time.
+   If the src is 4, but not 8 byte aligned, we first read 4 bytes to get
+   it 8 byte aligned.  Thus, we can do a little read-ahead, without
+   dereferencing a cache line that we should not touch.
+   Note that short and long instructions have been scheduled to avoid
+   branch stalls.
+   The beq_s to r3z could be made unaligned & long to avoid a stall
+   there, but the it is not likely to be taken often, and it
+   would also be likey to cost an unaligned mispredict at the next call.  */
+
+#include <linux/linkage.h>
+
+ENTRY_CFI(strcpy)
+	or	r2,r0,r1
+	bmsk_s	r2,r2,1
+	brne.d	r2,0,charloop
+	mov_s	r10,r0
+	ld_s	r3,[r1,0]
+	mov	r8,0x01010101
+	bbit0.d	r1,2,loop_start
+	ror	r12,r8
+	sub	r2,r3,r8
+	bic_s	r2,r2,r3
+	tst_s	r2,r12
+	bne	r3z
+	mov_s	r4,r3
+	.balign 4
+loop:
+	ld.a	r3,[r1,4]
+	st.ab	r4,[r10,4]
+loop_start:
+	ld.a	r4,[r1,4]
+	sub	r2,r3,r8
+	bic_s	r2,r2,r3
+	tst_s	r2,r12
+	bne_s	r3z
+	st.ab	r3,[r10,4]
+	sub	r2,r4,r8
+	bic	r2,r2,r4
+	tst	r2,r12
+	beq	loop
+	mov_s	r3,r4
+#ifdef __LITTLE_ENDIAN__
+r3z:	bmsk.f	r1,r3,7
+	lsr_s	r3,r3,8
+#else
+r3z:	lsr.f	r1,r3,24
+	asl_s	r3,r3,8
+#endif
+	bne.d	r3z
+	stb.ab	r1,[r10,1]
+	j_s	[blink]
+
+	.balign	4
+charloop:
+	ldb.ab	r3,[r1,1]
+
+
+	brne.d	r3,0,charloop
+	stb.ab	r3,[r10,1]
+	j	[blink]
+END_CFI(strcpy)
diff --git a/arch/arc/lib/strlen.S b/arch/arc/lib/strlen.S
new file mode 100644
index 000000000..dae428ceb
--- /dev/null
+++ b/arch/arc/lib/strlen.S
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/linkage.h>
+
+ENTRY_CFI(strlen)
+	or	r3,r0,7
+	ld	r2,[r3,-7]
+	ld.a	r6,[r3,-3]
+	mov	r4,0x01010101
+	; uses long immediate
+#ifdef __LITTLE_ENDIAN__
+	asl_s	r1,r0,3
+	btst_s	r0,2
+	asl	r7,r4,r1
+	ror	r5,r4
+	sub	r1,r2,r7
+	bic_s	r1,r1,r2
+	mov.eq	r7,r4
+	sub	r12,r6,r7
+	bic	r12,r12,r6
+	or.eq	r12,r12,r1
+	and	r12,r12,r5
+	brne	r12,0,.Learly_end
+#else /* BIG ENDIAN */
+	ror	r5,r4
+	btst_s	r0,2
+	mov_s	r1,31
+	sub3	r7,r1,r0
+	sub	r1,r2,r4
+	bic_s	r1,r1,r2
+	bmsk	r1,r1,r7
+	sub	r12,r6,r4
+	bic	r12,r12,r6
+	bmsk.ne	r12,r12,r7
+	or.eq	r12,r12,r1
+	and	r12,r12,r5
+	brne	r12,0,.Learly_end
+#endif /* ENDIAN */
+
+.Loop:
+	ld_s	r2,[r3,4]
+	ld.a	r6,[r3,8]
+	; stall for load result
+	sub	r1,r2,r4
+	bic_s	r1,r1,r2
+	sub	r12,r6,r4
+	bic	r12,r12,r6
+	or	r12,r12,r1
+	and	r12,r12,r5
+	breq r12,0,.Loop
+.Lend:
+	and.f	r1,r1,r5
+	sub.ne	r3,r3,4
+	mov.eq	r1,r12
+#ifdef __LITTLE_ENDIAN__
+	sub_s	r2,r1,1
+	bic_s	r2,r2,r1
+	norm	r1,r2
+	sub_s	r0,r0,3
+	lsr_s	r1,r1,3
+	sub	    r0,r3,r0
+	j_s.d	[blink]
+	sub	    r0,r0,r1
+#else /* BIG ENDIAN */
+	lsr_s	r1,r1,7
+	mov.eq	r2,r6
+	bic_s	r1,r1,r2
+	norm	r1,r1
+	sub	    r0,r3,r0
+	lsr_s	r1,r1,3
+	j_s.d	[blink]
+	add	    r0,r0,r1
+#endif /* ENDIAN */
+.Learly_end:
+	b.d	.Lend
+	sub_s.ne r1,r1,r1
+END_CFI(strlen)
diff --git a/arch/arc/mm/Makefile b/arch/arc/mm/Makefile
new file mode 100644
index 000000000..633a77336
--- /dev/null
+++ b/arch/arc/mm/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+
+obj-y	:= extable.o ioremap.o dma.o fault.o init.o
+obj-y	+= tlb.o tlbex.o cache.o mmap.o
+obj-$(CONFIG_HIGHMEM)	+= highmem.o
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
new file mode 100644
index 000000000..55c6de138
--- /dev/null
+++ b/arch/arc/mm/cache.c
@@ -0,0 +1,1248 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARC Cache Management
+ *
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/cache.h>
+#include <linux/mmu_context.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/pagemap.h>
+#include <asm/cacheflush.h>
+#include <asm/cachectl.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_ISA_ARCV2
+#define USE_RGN_FLSH	1
+#endif
+
+static int l2_line_sz;
+static int ioc_exists;
+int slc_enable = 1, ioc_enable = 1;
+unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
+unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
+
+void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr,
+			       unsigned long sz, const int op, const int full_page);
+
+void (*__dma_cache_wback_inv)(phys_addr_t start, unsigned long sz);
+void (*__dma_cache_inv)(phys_addr_t start, unsigned long sz);
+void (*__dma_cache_wback)(phys_addr_t start, unsigned long sz);
+
+char *arc_cache_mumbojumbo(int c, char *buf, int len)
+{
+	int n = 0;
+	struct cpuinfo_arc_cache *p;
+
+#define PR_CACHE(p, cfg, str)						\
+	if (!(p)->line_len)						\
+		n += scnprintf(buf + n, len - n, str"\t\t: N/A\n");	\
+	else								\
+		n += scnprintf(buf + n, len - n,			\
+			str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n",	\
+			(p)->sz_k, (p)->assoc, (p)->line_len,		\
+			(p)->vipt ? "VIPT" : "PIPT",			\
+			(p)->alias ? " aliasing" : "",			\
+			IS_USED_CFG(cfg));
+
+	PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
+	PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
+
+	p = &cpuinfo_arc700[c].slc;
+	if (p->line_len)
+		n += scnprintf(buf + n, len - n,
+			       "SLC\t\t: %uK, %uB Line%s\n",
+			       p->sz_k, p->line_len, IS_USED_RUN(slc_enable));
+
+	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
+		       perip_base,
+		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));
+
+	return buf;
+}
+
+/*
+ * Read the Cache Build Confuration Registers, Decode them and save into
+ * the cpuinfo structure for later use.
+ * No Validation done here, simply read/convert the BCRs
+ */
+static void read_decode_cache_bcr_arcv2(int cpu)
+{
+	struct cpuinfo_arc_cache *p_slc = &cpuinfo_arc700[cpu].slc;
+	struct bcr_generic sbcr;
+
+	struct bcr_slc_cfg {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int pad:24, way:2, lsz:2, sz:4;
+#else
+		unsigned int sz:4, lsz:2, way:2, pad:24;
+#endif
+	} slc_cfg;
+
+	struct bcr_clust_cfg {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
+#else
+		unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
+#endif
+	} cbcr;
+
+	struct bcr_volatile {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int start:4, limit:4, pad:22, order:1, disable:1;
+#else
+		unsigned int disable:1, order:1, pad:22, limit:4, start:4;
+#endif
+	} vol;
+
+
+	READ_BCR(ARC_REG_SLC_BCR, sbcr);
+	if (sbcr.ver) {
+		READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
+		p_slc->sz_k = 128 << slc_cfg.sz;
+		l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
+	}
+
+	READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
+	if (cbcr.c) {
+		ioc_exists = 1;
+
+		/*
+		 * As for today we don't support both IOC and ZONE_HIGHMEM enabled
+		 * simultaneously. This happens because as of today IOC aperture covers
+		 * only ZONE_NORMAL (low mem) and any dma transactions outside this
+		 * region won't be HW coherent.
+		 * If we want to use both IOC and ZONE_HIGHMEM we can use
+		 * bounce_buffer to handle dma transactions to HIGHMEM.
+		 * Also it is possible to modify dma_direct cache ops or increase IOC
+		 * aperture size if we are planning to use HIGHMEM without PAE.
+		 */
+		if (IS_ENABLED(CONFIG_HIGHMEM) || is_pae40_enabled())
+			ioc_enable = 0;
+	} else {
+		ioc_enable = 0;
+	}
+
+	/* HS 2.0 didn't have AUX_VOL */
+	if (cpuinfo_arc700[cpu].core.family > 0x51) {
+		READ_BCR(AUX_VOL, vol);
+		perip_base = vol.start << 28;
+		/* HS 3.0 has limit and strict-ordering fields */
+		if (cpuinfo_arc700[cpu].core.family > 0x52)
+			perip_end = (vol.limit << 28) - 1;
+	}
+}
+
+void read_decode_cache_bcr(void)
+{
+	struct cpuinfo_arc_cache *p_ic, *p_dc;
+	unsigned int cpu = smp_processor_id();
+	struct bcr_cache {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
+#else
+		unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
+#endif
+	} ibcr, dbcr;
+
+	p_ic = &cpuinfo_arc700[cpu].icache;
+	READ_BCR(ARC_REG_IC_BCR, ibcr);
+
+	if (!ibcr.ver)
+		goto dc_chk;
+
+	if (ibcr.ver <= 3) {
+		BUG_ON(ibcr.config != 3);
+		p_ic->assoc = 2;		/* Fixed to 2w set assoc */
+	} else if (ibcr.ver >= 4) {
+		p_ic->assoc = 1 << ibcr.config;	/* 1,2,4,8 */
+	}
+
+	p_ic->line_len = 8 << ibcr.line_len;
+	p_ic->sz_k = 1 << (ibcr.sz - 1);
+	p_ic->vipt = 1;
+	p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1;
+
+dc_chk:
+	p_dc = &cpuinfo_arc700[cpu].dcache;
+	READ_BCR(ARC_REG_DC_BCR, dbcr);
+
+	if (!dbcr.ver)
+		goto slc_chk;
+
+	if (dbcr.ver <= 3) {
+		BUG_ON(dbcr.config != 2);
+		p_dc->assoc = 4;		/* Fixed to 4w set assoc */
+		p_dc->vipt = 1;
+		p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1;
+	} else if (dbcr.ver >= 4) {
+		p_dc->assoc = 1 << dbcr.config;	/* 1,2,4,8 */
+		p_dc->vipt = 0;
+		p_dc->alias = 0;		/* PIPT so can't VIPT alias */
+	}
+
+	p_dc->line_len = 16 << dbcr.line_len;
+	p_dc->sz_k = 1 << (dbcr.sz - 1);
+
+slc_chk:
+	if (is_isa_arcv2())
+                read_decode_cache_bcr_arcv2(cpu);
+}
+
+/*
+ * Line Operation on {I,D}-Cache
+ */
+
+#define OP_INV		0x1
+#define OP_FLUSH	0x2
+#define OP_FLUSH_N_INV	0x3
+#define OP_INV_IC	0x4
+
+/*
+ * Cache Flush programming model
+ *
+ * ARC700 MMUv3 I$ and D$ are both VIPT and can potentially alias.
+ * Programming model requires both paddr and vaddr irrespecive of aliasing
+ * considerations:
+ *  - vaddr in {I,D}C_IV?L
+ *  - paddr in {I,D}C_PTAG
+ *
+ * In HS38x (MMUv4), D$ is PIPT, I$ is VIPT and can still alias.
+ * Programming model is different for aliasing vs. non-aliasing I$
+ *  - D$ / Non-aliasing I$: only paddr in {I,D}C_IV?L
+ *  - Aliasing I$: same as ARC700 above (so MMUv3 routine used for MMUv4 I$)
+ *
+ *  - If PAE40 is enabled, independent of aliasing considerations, the higher
+ *    bits needs to be written into PTAG_HI
+ */
+
+static inline
+void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
+			  unsigned long sz, const int op, const int full_page)
+{
+	unsigned int aux_cmd, aux_tag;
+	int num_lines;
+
+	if (op == OP_INV_IC) {
+		aux_cmd = ARC_REG_IC_IVIL;
+		aux_tag = ARC_REG_IC_PTAG;
+	} else {
+		aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
+		aux_tag = ARC_REG_DC_PTAG;
+	}
+
+	/* Ensure we properly floor/ceil the non-line aligned/sized requests
+	 * and have @paddr - aligned to cache line and integral @num_lines.
+	 * This however can be avoided for page sized since:
+	 *  -@paddr will be cache-line aligned already (being page aligned)
+	 *  -@sz will be integral multiple of line size (being page sized).
+	 */
+	if (!full_page) {
+		sz += paddr & ~CACHE_LINE_MASK;
+		paddr &= CACHE_LINE_MASK;
+		vaddr &= CACHE_LINE_MASK;
+	}
+	num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
+
+	/*
+	 * MMUv3, cache ops require paddr in PTAG reg
+	 * if V-P const for loop, PTAG can be written once outside loop
+	 */
+	if (full_page)
+		write_aux_reg(aux_tag, paddr);
+
+	/*
+	 * This is technically for MMU v4, using the MMU v3 programming model
+	 * Special work for HS38 aliasing I-cache configuration with PAE40
+	 *   - upper 8 bits of paddr need to be written into PTAG_HI
+	 *   - (and needs to be written before the lower 32 bits)
+	 * Note that PTAG_HI is hoisted outside the line loop
+	 */
+	if (is_pae40_enabled() && op == OP_INV_IC)
+		write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32);
+
+	while (num_lines-- > 0) {
+		if (!full_page) {
+			write_aux_reg(aux_tag, paddr);
+			paddr += L1_CACHE_BYTES;
+		}
+
+		write_aux_reg(aux_cmd, vaddr);
+		vaddr += L1_CACHE_BYTES;
+	}
+}
+
+#ifndef USE_RGN_FLSH
+
+/*
+ */
+static inline
+void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
+			  unsigned long sz, const int op, const int full_page)
+{
+	unsigned int aux_cmd;
+	int num_lines;
+
+	if (op == OP_INV_IC) {
+		aux_cmd = ARC_REG_IC_IVIL;
+	} else {
+		/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
+		aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
+	}
+
+	/* Ensure we properly floor/ceil the non-line aligned/sized requests
+	 * and have @paddr - aligned to cache line and integral @num_lines.
+	 * This however can be avoided for page sized since:
+	 *  -@paddr will be cache-line aligned already (being page aligned)
+	 *  -@sz will be integral multiple of line size (being page sized).
+	 */
+	if (!full_page) {
+		sz += paddr & ~CACHE_LINE_MASK;
+		paddr &= CACHE_LINE_MASK;
+	}
+
+	num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
+
+	/*
+	 * For HS38 PAE40 configuration
+	 *   - upper 8 bits of paddr need to be written into PTAG_HI
+	 *   - (and needs to be written before the lower 32 bits)
+	 */
+	if (is_pae40_enabled()) {
+		if (op == OP_INV_IC)
+			/*
+			 * Non aliasing I-cache in HS38,
+			 * aliasing I-cache handled in __cache_line_loop_v3()
+			 */
+			write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32);
+		else
+			write_aux_reg(ARC_REG_DC_PTAG_HI, (u64)paddr >> 32);
+	}
+
+	while (num_lines-- > 0) {
+		write_aux_reg(aux_cmd, paddr);
+		paddr += L1_CACHE_BYTES;
+	}
+}
+
+#else
+
+/*
+ * optimized flush operation which takes a region as opposed to iterating per line
+ */
+static inline
+void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
+			  unsigned long sz, const int op, const int full_page)
+{
+	unsigned int s, e;
+
+	/* Only for Non aliasing I-cache in HS38 */
+	if (op == OP_INV_IC) {
+		s = ARC_REG_IC_IVIR;
+		e = ARC_REG_IC_ENDR;
+	} else {
+		s = ARC_REG_DC_STARTR;
+		e = ARC_REG_DC_ENDR;
+	}
+
+	if (!full_page) {
+		/* for any leading gap between @paddr and start of cache line */
+		sz += paddr & ~CACHE_LINE_MASK;
+		paddr &= CACHE_LINE_MASK;
+
+		/*
+		 *  account for any trailing gap to end of cache line
+		 *  this is equivalent to DIV_ROUND_UP() in line ops above
+		 */
+		sz += L1_CACHE_BYTES - 1;
+	}
+
+	if (is_pae40_enabled()) {
+		/* TBD: check if crossing 4TB boundary */
+		if (op == OP_INV_IC)
+			write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32);
+		else
+			write_aux_reg(ARC_REG_DC_PTAG_HI, (u64)paddr >> 32);
+	}
+
+	/* ENDR needs to be set ahead of START */
+	write_aux_reg(e, paddr + sz);	/* ENDR is exclusive */
+	write_aux_reg(s, paddr);
+
+	/* caller waits on DC_CTRL.FS */
+}
+
+#endif
+
+#ifdef CONFIG_ARC_MMU_V3
+#define __cache_line_loop	__cache_line_loop_v3
+#else
+#define __cache_line_loop	__cache_line_loop_v4
+#endif
+
+#ifdef CONFIG_ARC_HAS_DCACHE
+
+/***************************************************************
+ * Machine specific helpers for Entire D-Cache or Per Line ops
+ */
+
+#ifndef USE_RGN_FLSH
+/*
+ * this version avoids extra read/write of DC_CTRL for flush or invalid ops
+ * in the non region flush regime (such as for ARCompact)
+ */
+static inline void __before_dc_op(const int op)
+{
+	if (op == OP_FLUSH_N_INV) {
+		/* Dcache provides 2 cmd: FLUSH or INV
+		 * INV in turn has sub-modes: DISCARD or FLUSH-BEFORE
+		 * flush-n-inv is achieved by INV cmd but with IM=1
+		 * So toggle INV sub-mode depending on op request and default
+		 */
+		const unsigned int ctl = ARC_REG_DC_CTRL;
+		write_aux_reg(ctl, read_aux_reg(ctl) | DC_CTRL_INV_MODE_FLUSH);
+	}
+}
+
+#else
+
+static inline void __before_dc_op(const int op)
+{
+	const unsigned int ctl = ARC_REG_DC_CTRL;
+	unsigned int val = read_aux_reg(ctl);
+
+	if (op == OP_FLUSH_N_INV) {
+		val |= DC_CTRL_INV_MODE_FLUSH;
+	}
+
+	if (op != OP_INV_IC) {
+		/*
+		 * Flush / Invalidate is provided by DC_CTRL.RNG_OP 0 or 1
+		 * combined Flush-n-invalidate uses DC_CTRL.IM = 1 set above
+		 */
+		val &= ~DC_CTRL_RGN_OP_MSK;
+		if (op & OP_INV)
+			val |= DC_CTRL_RGN_OP_INV;
+	}
+	write_aux_reg(ctl, val);
+}
+
+#endif
+
+
+static inline void __after_dc_op(const int op)
+{
+	if (op & OP_FLUSH) {
+		const unsigned int ctl = ARC_REG_DC_CTRL;
+		unsigned int reg;
+
+		/* flush / flush-n-inv both wait */
+		while ((reg = read_aux_reg(ctl)) & DC_CTRL_FLUSH_STATUS)
+			;
+
+		/* Switch back to default Invalidate mode */
+		if (op == OP_FLUSH_N_INV)
+			write_aux_reg(ctl, reg & ~DC_CTRL_INV_MODE_FLUSH);
+	}
+}
+
+/*
+ * Operation on Entire D-Cache
+ * @op = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV}
+ * Note that constant propagation ensures all the checks are gone
+ * in generated code
+ */
+static inline void __dc_entire_op(const int op)
+{
+	int aux;
+
+	__before_dc_op(op);
+
+	if (op & OP_INV)	/* Inv or flush-n-inv use same cmd reg */
+		aux = ARC_REG_DC_IVDC;
+	else
+		aux = ARC_REG_DC_FLSH;
+
+	write_aux_reg(aux, 0x1);
+
+	__after_dc_op(op);
+}
+
+static inline void __dc_disable(void)
+{
+	const int r = ARC_REG_DC_CTRL;
+
+	__dc_entire_op(OP_FLUSH_N_INV);
+	write_aux_reg(r, read_aux_reg(r) | DC_CTRL_DIS);
+}
+
+static void __dc_enable(void)
+{
+	const int r = ARC_REG_DC_CTRL;
+
+	write_aux_reg(r, read_aux_reg(r) & ~DC_CTRL_DIS);
+}
+
+/* For kernel mappings cache operation: index is same as paddr */
+#define __dc_line_op_k(p, sz, op)	__dc_line_op(p, p, sz, op)
+
+/*
+ * D-Cache Line ops: Per Line INV (discard or wback+discard) or FLUSH (wback)
+ */
+static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr,
+				unsigned long sz, const int op)
+{
+	const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	__before_dc_op(op);
+
+	__cache_line_loop(paddr, vaddr, sz, op, full_page);
+
+	__after_dc_op(op);
+
+	local_irq_restore(flags);
+}
+
+#else
+
+#define __dc_entire_op(op)
+#define __dc_disable()
+#define __dc_enable()
+#define __dc_line_op(paddr, vaddr, sz, op)
+#define __dc_line_op_k(paddr, sz, op)
+
+#endif /* CONFIG_ARC_HAS_DCACHE */
+
+#ifdef CONFIG_ARC_HAS_ICACHE
+
+static inline void __ic_entire_inv(void)
+{
+	write_aux_reg(ARC_REG_IC_IVIC, 1);
+	read_aux_reg(ARC_REG_IC_CTRL);	/* blocks */
+}
+
+static inline void
+__ic_line_inv_vaddr_local(phys_addr_t paddr, unsigned long vaddr,
+			  unsigned long sz)
+{
+	const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	(*_cache_line_loop_ic_fn)(paddr, vaddr, sz, OP_INV_IC, full_page);
+	local_irq_restore(flags);
+}
+
+#ifndef CONFIG_SMP
+
+#define __ic_line_inv_vaddr(p, v, s)	__ic_line_inv_vaddr_local(p, v, s)
+
+#else
+
+struct ic_inv_args {
+	phys_addr_t paddr, vaddr;
+	int sz;
+};
+
+static void __ic_line_inv_vaddr_helper(void *info)
+{
+        struct ic_inv_args *ic_inv = info;
+
+        __ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
+}
+
+static void __ic_line_inv_vaddr(phys_addr_t paddr, unsigned long vaddr,
+				unsigned long sz)
+{
+	struct ic_inv_args ic_inv = {
+		.paddr = paddr,
+		.vaddr = vaddr,
+		.sz    = sz
+	};
+
+	on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1);
+}
+
+#endif	/* CONFIG_SMP */
+
+#else	/* !CONFIG_ARC_HAS_ICACHE */
+
+#define __ic_entire_inv()
+#define __ic_line_inv_vaddr(pstart, vstart, sz)
+
+#endif /* CONFIG_ARC_HAS_ICACHE */
+
+noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
+{
+#ifdef CONFIG_ISA_ARCV2
+	/*
+	 * SLC is shared between all cores and concurrent aux operations from
+	 * multiple cores need to be serialized using a spinlock
+	 * A concurrent operation can be silently ignored and/or the old/new
+	 * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop
+	 * below)
+	 */
+	static DEFINE_SPINLOCK(lock);
+	unsigned long flags;
+	unsigned int ctrl;
+	phys_addr_t end;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/*
+	 * The Region Flush operation is specified by CTRL.RGN_OP[11..9]
+	 *  - b'000 (default) is Flush,
+	 *  - b'001 is Invalidate if CTRL.IM == 0
+	 *  - b'001 is Flush-n-Invalidate if CTRL.IM == 1
+	 */
+	ctrl = read_aux_reg(ARC_REG_SLC_CTRL);
+
+	/* Don't rely on default value of IM bit */
+	if (!(op & OP_FLUSH))		/* i.e. OP_INV */
+		ctrl &= ~SLC_CTRL_IM;	/* clear IM: Disable flush before Inv */
+	else
+		ctrl |= SLC_CTRL_IM;
+
+	if (op & OP_INV)
+		ctrl |= SLC_CTRL_RGN_OP_INV;	/* Inv or flush-n-inv */
+	else
+		ctrl &= ~SLC_CTRL_RGN_OP_INV;
+
+	write_aux_reg(ARC_REG_SLC_CTRL, ctrl);
+
+	/*
+	 * Lower bits are ignored, no need to clip
+	 * END needs to be setup before START (latter triggers the operation)
+	 * END can't be same as START, so add (l2_line_sz - 1) to sz
+	 */
+	end = paddr + sz + l2_line_sz - 1;
+	if (is_pae40_enabled())
+		write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end));
+
+	write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end));
+
+	if (is_pae40_enabled())
+		write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr));
+
+	write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr));
+
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(ARC_REG_SLC_CTRL);
+
+	while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
+
+	spin_unlock_irqrestore(&lock, flags);
+#endif
+}
+
+noinline void slc_op_line(phys_addr_t paddr, unsigned long sz, const int op)
+{
+#ifdef CONFIG_ISA_ARCV2
+	/*
+	 * SLC is shared between all cores and concurrent aux operations from
+	 * multiple cores need to be serialized using a spinlock
+	 * A concurrent operation can be silently ignored and/or the old/new
+	 * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop
+	 * below)
+	 */
+	static DEFINE_SPINLOCK(lock);
+
+	const unsigned long SLC_LINE_MASK = ~(l2_line_sz - 1);
+	unsigned int ctrl, cmd;
+	unsigned long flags;
+	int num_lines;
+
+	spin_lock_irqsave(&lock, flags);
+
+	ctrl = read_aux_reg(ARC_REG_SLC_CTRL);
+
+	/* Don't rely on default value of IM bit */
+	if (!(op & OP_FLUSH))		/* i.e. OP_INV */
+		ctrl &= ~SLC_CTRL_IM;	/* clear IM: Disable flush before Inv */
+	else
+		ctrl |= SLC_CTRL_IM;
+
+	write_aux_reg(ARC_REG_SLC_CTRL, ctrl);
+
+	cmd = op & OP_INV ? ARC_AUX_SLC_IVDL : ARC_AUX_SLC_FLDL;
+
+	sz += paddr & ~SLC_LINE_MASK;
+	paddr &= SLC_LINE_MASK;
+
+	num_lines = DIV_ROUND_UP(sz, l2_line_sz);
+
+	while (num_lines-- > 0) {
+		write_aux_reg(cmd, paddr);
+		paddr += l2_line_sz;
+	}
+
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(ARC_REG_SLC_CTRL);
+
+	while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
+
+	spin_unlock_irqrestore(&lock, flags);
+#endif
+}
+
+#define slc_op(paddr, sz, op)	slc_op_rgn(paddr, sz, op)
+
+noinline static void slc_entire_op(const int op)
+{
+	unsigned int ctrl, r = ARC_REG_SLC_CTRL;
+
+	ctrl = read_aux_reg(r);
+
+	if (!(op & OP_FLUSH))		/* i.e. OP_INV */
+		ctrl &= ~SLC_CTRL_IM;	/* clear IM: Disable flush before Inv */
+	else
+		ctrl |= SLC_CTRL_IM;
+
+	write_aux_reg(r, ctrl);
+
+	if (op & OP_INV)	/* Inv or flush-n-inv use same cmd reg */
+		write_aux_reg(ARC_REG_SLC_INVALIDATE, 0x1);
+	else
+		write_aux_reg(ARC_REG_SLC_FLUSH, 0x1);
+
+	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
+	read_aux_reg(r);
+
+	/* Important to wait for flush to complete */
+	while (read_aux_reg(r) & SLC_CTRL_BUSY);
+}
+
+static inline void arc_slc_disable(void)
+{
+	const int r = ARC_REG_SLC_CTRL;
+
+	slc_entire_op(OP_FLUSH_N_INV);
+	write_aux_reg(r, read_aux_reg(r) | SLC_CTRL_DIS);
+}
+
+static inline void arc_slc_enable(void)
+{
+	const int r = ARC_REG_SLC_CTRL;
+
+	write_aux_reg(r, read_aux_reg(r) & ~SLC_CTRL_DIS);
+}
+
+/***********************************************************
+ * Exported APIs
+ */
+
+/*
+ * Handle cache congruency of kernel and userspace mappings of page when kernel
+ * writes-to/reads-from
+ *
+ * The idea is to defer flushing of kernel mapping after a WRITE, possible if:
+ *  -dcache is NOT aliasing, hence any U/K-mappings of page are congruent
+ *  -U-mapping doesn't exist yet for page (finalised in update_mmu_cache)
+ *  -In SMP, if hardware caches are coherent
+ *
+ * There's a corollary case, where kernel READs from a userspace mapped page.
+ * If the U-mapping is not congruent to K-mapping, former needs flushing.
+ */
+void flush_dcache_page(struct page *page)
+{
+	struct address_space *mapping;
+
+	if (!cache_is_vipt_aliasing()) {
+		clear_bit(PG_dc_clean, &page->flags);
+		return;
+	}
+
+	/* don't handle anon pages here */
+	mapping = page_mapping_file(page);
+	if (!mapping)
+		return;
+
+	/*
+	 * pagecache page, file not yet mapped to userspace
+	 * Make a note that K-mapping is dirty
+	 */
+	if (!mapping_mapped(mapping)) {
+		clear_bit(PG_dc_clean, &page->flags);
+	} else if (page_mapcount(page)) {
+
+		/* kernel reading from page with U-mapping */
+		phys_addr_t paddr = (unsigned long)page_address(page);
+		unsigned long vaddr = page->index << PAGE_SHIFT;
+
+		if (addr_not_cache_congruent(paddr, vaddr))
+			__flush_dcache_page(paddr, vaddr);
+	}
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+/*
+ * DMA ops for systems with L1 cache only
+ * Make memory coherent with L1 cache by flushing/invalidating L1 lines
+ */
+static void __dma_cache_wback_inv_l1(phys_addr_t start, unsigned long sz)
+{
+	__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
+}
+
+static void __dma_cache_inv_l1(phys_addr_t start, unsigned long sz)
+{
+	__dc_line_op_k(start, sz, OP_INV);
+}
+
+static void __dma_cache_wback_l1(phys_addr_t start, unsigned long sz)
+{
+	__dc_line_op_k(start, sz, OP_FLUSH);
+}
+
+/*
+ * DMA ops for systems with both L1 and L2 caches, but without IOC
+ * Both L1 and L2 lines need to be explicitly flushed/invalidated
+ */
+static void __dma_cache_wback_inv_slc(phys_addr_t start, unsigned long sz)
+{
+	__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
+	slc_op(start, sz, OP_FLUSH_N_INV);
+}
+
+static void __dma_cache_inv_slc(phys_addr_t start, unsigned long sz)
+{
+	__dc_line_op_k(start, sz, OP_INV);
+	slc_op(start, sz, OP_INV);
+}
+
+static void __dma_cache_wback_slc(phys_addr_t start, unsigned long sz)
+{
+	__dc_line_op_k(start, sz, OP_FLUSH);
+	slc_op(start, sz, OP_FLUSH);
+}
+
+/*
+ * Exported DMA API
+ */
+void dma_cache_wback_inv(phys_addr_t start, unsigned long sz)
+{
+	__dma_cache_wback_inv(start, sz);
+}
+EXPORT_SYMBOL(dma_cache_wback_inv);
+
+void dma_cache_inv(phys_addr_t start, unsigned long sz)
+{
+	__dma_cache_inv(start, sz);
+}
+EXPORT_SYMBOL(dma_cache_inv);
+
+void dma_cache_wback(phys_addr_t start, unsigned long sz)
+{
+	__dma_cache_wback(start, sz);
+}
+EXPORT_SYMBOL(dma_cache_wback);
+
+/*
+ * This is API for making I/D Caches consistent when modifying
+ * kernel code (loadable modules, kprobes, kgdb...)
+ * This is called on insmod, with kernel virtual address for CODE of
+ * the module. ARC cache maintenance ops require PHY address thus we
+ * need to convert vmalloc addr to PHY addr
+ */
+void flush_icache_range(unsigned long kstart, unsigned long kend)
+{
+	unsigned int tot_sz;
+
+	WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__);
+
+	/* Shortcut for bigger flush ranges.
+	 * Here we don't care if this was kernel virtual or phy addr
+	 */
+	tot_sz = kend - kstart;
+	if (tot_sz > PAGE_SIZE) {
+		flush_cache_all();
+		return;
+	}
+
+	/* Case: Kernel Phy addr (0x8000_0000 onwards) */
+	if (likely(kstart > PAGE_OFFSET)) {
+		/*
+		 * The 2nd arg despite being paddr will be used to index icache
+		 * This is OK since no alternate virtual mappings will exist
+		 * given the callers for this case: kprobe/kgdb in built-in
+		 * kernel code only.
+		 */
+		__sync_icache_dcache(kstart, kstart, kend - kstart);
+		return;
+	}
+
+	/*
+	 * Case: Kernel Vaddr (0x7000_0000 to 0x7fff_ffff)
+	 * (1) ARC Cache Maintenance ops only take Phy addr, hence special
+	 *     handling of kernel vaddr.
+	 *
+	 * (2) Despite @tot_sz being < PAGE_SIZE (bigger cases handled already),
+	 *     it still needs to handle  a 2 page scenario, where the range
+	 *     straddles across 2 virtual pages and hence need for loop
+	 */
+	while (tot_sz > 0) {
+		unsigned int off, sz;
+		unsigned long phy, pfn;
+
+		off = kstart % PAGE_SIZE;
+		pfn = vmalloc_to_pfn((void *)kstart);
+		phy = (pfn << PAGE_SHIFT) + off;
+		sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off);
+		__sync_icache_dcache(phy, kstart, sz);
+		kstart += sz;
+		tot_sz -= sz;
+	}
+}
+EXPORT_SYMBOL(flush_icache_range);
+
+/*
+ * General purpose helper to make I and D cache lines consistent.
+ * @paddr is phy addr of region
+ * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
+ *    However in one instance, when called by kprobe (for a breakpt in
+ *    builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
+ *    use a paddr to index the cache (despite VIPT). This is fine since a
+ *    builtin kernel page will not have any virtual mappings.
+ *    kprobe on loadable module will be kernel vaddr.
+ */
+void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len)
+{
+	__dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
+	__ic_line_inv_vaddr(paddr, vaddr, len);
+}
+
+/* wrapper to compile time eliminate alignment checks in flush loop */
+void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr)
+{
+	__ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
+}
+
+/*
+ * wrapper to clearout kernel or userspace mappings of a page
+ * For kernel mappings @vaddr == @paddr
+ */
+void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr)
+{
+	__dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
+}
+
+noinline void flush_cache_all(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	__ic_entire_inv();
+	__dc_entire_op(OP_FLUSH_N_INV);
+
+	local_irq_restore(flags);
+
+}
+
+#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+	flush_cache_all();
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
+		      unsigned long pfn)
+{
+	phys_addr_t paddr = pfn << PAGE_SHIFT;
+
+	u_vaddr &= PAGE_MASK;
+
+	__flush_dcache_page(paddr, u_vaddr);
+
+	if (vma->vm_flags & VM_EXEC)
+		__inv_icache_page(paddr, u_vaddr);
+}
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+		       unsigned long end)
+{
+	flush_cache_all();
+}
+
+void flush_anon_page(struct vm_area_struct *vma, struct page *page,
+		     unsigned long u_vaddr)
+{
+	/* TBD: do we really need to clear the kernel mapping */
+	__flush_dcache_page((phys_addr_t)page_address(page), u_vaddr);
+	__flush_dcache_page((phys_addr_t)page_address(page),
+			    (phys_addr_t)page_address(page));
+
+}
+
+#endif
+
+void copy_user_highpage(struct page *to, struct page *from,
+	unsigned long u_vaddr, struct vm_area_struct *vma)
+{
+	void *kfrom = kmap_atomic(from);
+	void *kto = kmap_atomic(to);
+	int clean_src_k_mappings = 0;
+
+	/*
+	 * If SRC page was already mapped in userspace AND it's U-mapping is
+	 * not congruent with K-mapping, sync former to physical page so that
+	 * K-mapping in memcpy below, sees the right data
+	 *
+	 * Note that while @u_vaddr refers to DST page's userspace vaddr, it is
+	 * equally valid for SRC page as well
+	 *
+	 * For !VIPT cache, all of this gets compiled out as
+	 * addr_not_cache_congruent() is 0
+	 */
+	if (page_mapcount(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
+		__flush_dcache_page((unsigned long)kfrom, u_vaddr);
+		clean_src_k_mappings = 1;
+	}
+
+	copy_page(kto, kfrom);
+
+	/*
+	 * Mark DST page K-mapping as dirty for a later finalization by
+	 * update_mmu_cache(). Although the finalization could have been done
+	 * here as well (given that both vaddr/paddr are available).
+	 * But update_mmu_cache() already has code to do that for other
+	 * non copied user pages (e.g. read faults which wire in pagecache page
+	 * directly).
+	 */
+	clear_bit(PG_dc_clean, &to->flags);
+
+	/*
+	 * if SRC was already usermapped and non-congruent to kernel mapping
+	 * sync the kernel mapping back to physical page
+	 */
+	if (clean_src_k_mappings) {
+		__flush_dcache_page((unsigned long)kfrom, (unsigned long)kfrom);
+		set_bit(PG_dc_clean, &from->flags);
+	} else {
+		clear_bit(PG_dc_clean, &from->flags);
+	}
+
+	kunmap_atomic(kto);
+	kunmap_atomic(kfrom);
+}
+
+void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
+{
+	clear_page(to);
+	clear_bit(PG_dc_clean, &page->flags);
+}
+EXPORT_SYMBOL(clear_user_page);
+
+/**********************************************************************
+ * Explicit Cache flush request from user space via syscall
+ * Needed for JITs which generate code on the fly
+ */
+SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
+{
+	/* TBD: optimize this */
+	flush_cache_all();
+	return 0;
+}
+
+/*
+ * IO-Coherency (IOC) setup rules:
+ *
+ * 1. Needs to be at system level, so only once by Master core
+ *    Non-Masters need not be accessing caches at that time
+ *    - They are either HALT_ON_RESET and kick started much later or
+ *    - if run on reset, need to ensure that arc_platform_smp_wait_to_boot()
+ *      doesn't perturb caches or coherency unit
+ *
+ * 2. caches (L1 and SLC) need to be purged (flush+inv) before setting up IOC,
+ *    otherwise any straggler data might behave strangely post IOC enabling
+ *
+ * 3. All Caches need to be disabled when setting up IOC to elide any in-flight
+ *    Coherency transactions
+ */
+noinline void __init arc_ioc_setup(void)
+{
+	unsigned int ioc_base, mem_sz;
+
+	/*
+	 * If IOC was already enabled (due to bootloader) it technically needs to
+	 * be reconfigured with aperture base,size corresponding to Linux memory map
+	 * which will certainly be different than uboot's. But disabling and
+	 * reenabling IOC when DMA might be potentially active is tricky business.
+	 * To avoid random memory issues later, just panic here and ask user to
+	 * upgrade bootloader to one which doesn't enable IOC
+	 */
+	if (read_aux_reg(ARC_REG_IO_COH_ENABLE) & ARC_IO_COH_ENABLE_BIT)
+		panic("IOC already enabled, please upgrade bootloader!\n");
+
+	if (!ioc_enable)
+		return;
+
+	/* Flush + invalidate + disable L1 dcache */
+	__dc_disable();
+
+	/* Flush + invalidate SLC */
+	if (read_aux_reg(ARC_REG_SLC_BCR))
+		slc_entire_op(OP_FLUSH_N_INV);
+
+	/*
+	 * currently IOC Aperture covers entire DDR
+	 * TBD: fix for PGU + 1GB of low mem
+	 * TBD: fix for PAE
+	 */
+	mem_sz = arc_get_mem_sz();
+
+	if (!is_power_of_2(mem_sz) || mem_sz < 4096)
+		panic("IOC Aperture size must be power of 2 larger than 4KB");
+
+	/*
+	 * IOC Aperture size decoded as 2 ^ (SIZE + 2) KB,
+	 * so setting 0x11 implies 512MB, 0x12 implies 1GB...
+	 */
+	write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, order_base_2(mem_sz >> 10) - 2);
+
+	/* for now assume kernel base is start of IOC aperture */
+	ioc_base = CONFIG_LINUX_RAM_BASE;
+
+	if (ioc_base % mem_sz != 0)
+		panic("IOC Aperture start must be aligned to the size of the aperture");
+
+	write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ioc_base >> 12);
+	write_aux_reg(ARC_REG_IO_COH_PARTIAL, ARC_IO_COH_PARTIAL_BIT);
+	write_aux_reg(ARC_REG_IO_COH_ENABLE, ARC_IO_COH_ENABLE_BIT);
+
+	/* Re-enable L1 dcache */
+	__dc_enable();
+}
+
+/*
+ * Cache related boot time checks/setups only needed on master CPU:
+ *  - Geometry checks (kernel build and hardware agree: e.g. L1_CACHE_BYTES)
+ *    Assume SMP only, so all cores will have same cache config. A check on
+ *    one core suffices for all
+ *  - IOC setup / dma callbacks only need to be done once
+ */
+void __init arc_cache_init_master(void)
+{
+	unsigned int __maybe_unused cpu = smp_processor_id();
+
+	if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
+		struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
+
+		if (!ic->line_len)
+			panic("cache support enabled but non-existent cache\n");
+
+		if (ic->line_len != L1_CACHE_BYTES)
+			panic("ICache line [%d] != kernel Config [%d]",
+			      ic->line_len, L1_CACHE_BYTES);
+
+		/*
+		 * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG
+		 * pair to provide vaddr/paddr respectively, just as in MMU v3
+		 */
+		if (is_isa_arcv2() && ic->alias)
+			_cache_line_loop_ic_fn = __cache_line_loop_v3;
+		else
+			_cache_line_loop_ic_fn = __cache_line_loop;
+	}
+
+	if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
+		struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
+
+		if (!dc->line_len)
+			panic("cache support enabled but non-existent cache\n");
+
+		if (dc->line_len != L1_CACHE_BYTES)
+			panic("DCache line [%d] != kernel Config [%d]",
+			      dc->line_len, L1_CACHE_BYTES);
+
+		/* check for D-Cache aliasing on ARCompact: ARCv2 has PIPT */
+		if (is_isa_arcompact()) {
+			int handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
+			int num_colors = dc->sz_k/dc->assoc/TO_KB(PAGE_SIZE);
+
+			if (dc->alias) {
+				if (!handled)
+					panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+				if (CACHE_COLORS_NUM != num_colors)
+					panic("CACHE_COLORS_NUM not optimized for config\n");
+			} else if (!dc->alias && handled) {
+				panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+			}
+		}
+	}
+
+	/*
+	 * Check that SMP_CACHE_BYTES (and hence ARCH_DMA_MINALIGN) is larger
+	 * or equal to any cache line length.
+	 */
+	BUILD_BUG_ON_MSG(L1_CACHE_BYTES > SMP_CACHE_BYTES,
+			 "SMP_CACHE_BYTES must be >= any cache line length");
+	if (is_isa_arcv2() && (l2_line_sz > SMP_CACHE_BYTES))
+		panic("L2 Cache line [%d] > kernel Config [%d]\n",
+		      l2_line_sz, SMP_CACHE_BYTES);
+
+	/* Note that SLC disable not formally supported till HS 3.0 */
+	if (is_isa_arcv2() && l2_line_sz && !slc_enable)
+		arc_slc_disable();
+
+	if (is_isa_arcv2() && ioc_exists)
+		arc_ioc_setup();
+
+	if (is_isa_arcv2() && l2_line_sz && slc_enable) {
+		__dma_cache_wback_inv = __dma_cache_wback_inv_slc;
+		__dma_cache_inv = __dma_cache_inv_slc;
+		__dma_cache_wback = __dma_cache_wback_slc;
+	} else {
+		__dma_cache_wback_inv = __dma_cache_wback_inv_l1;
+		__dma_cache_inv = __dma_cache_inv_l1;
+		__dma_cache_wback = __dma_cache_wback_l1;
+	}
+	/*
+	 * In case of IOC (say IOC+SLC case), pointers above could still be set
+	 * but end up not being relevant as the first function in chain is not
+	 * called at all for devices using coherent DMA.
+	 *     arch_sync_dma_for_cpu() -> dma_cache_*() -> __dma_cache_*()
+	 */
+}
+
+void __ref arc_cache_init(void)
+{
+	unsigned int __maybe_unused cpu = smp_processor_id();
+	char str[256];
+
+	pr_info("%s", arc_cache_mumbojumbo(0, str, sizeof(str)));
+
+	if (!cpu)
+		arc_cache_init_master();
+
+	/*
+	 * In PAE regime, TLB and cache maintenance ops take wider addresses
+	 * And even if PAE is not enabled in kernel, the upper 32-bits still need
+	 * to be zeroed to keep the ops sane.
+	 * As an optimization for more common !PAE enabled case, zero them out
+	 * once at init, rather than checking/setting to 0 for every runtime op
+	 */
+	if (is_isa_arcv2() && pae40_exist_but_not_enab()) {
+
+		if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE))
+			write_aux_reg(ARC_REG_IC_PTAG_HI, 0);
+
+		if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE))
+			write_aux_reg(ARC_REG_DC_PTAG_HI, 0);
+
+		if (l2_line_sz) {
+			write_aux_reg(ARC_REG_SLC_RGN_END1, 0);
+			write_aux_reg(ARC_REG_SLC_RGN_START1, 0);
+		}
+	}
+}
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
new file mode 100644
index 000000000..2a7fbbb83
--- /dev/null
+++ b/arch/arc/mm/dma.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/dma-map-ops.h>
+#include <asm/cache.h>
+#include <asm/cacheflush.h>
+
+/*
+ * ARCH specific callbacks for generic noncoherent DMA ops
+ *  - hardware IOC not available (or "dma-coherent" not set for device in DT)
+ *  - But still handle both coherent and non-coherent requests from caller
+ *
+ * For DMA coherent hardware (IOC) generic code suffices
+ */
+
+void arch_dma_prep_coherent(struct page *page, size_t size)
+{
+	/*
+	 * Evict any existing L1 and/or L2 lines for the backing page
+	 * in case it was used earlier as a normal "cached" page.
+	 * Yeah this bit us - STAR 9000898266
+	 *
+	 * Although core does call flush_cache_vmap(), it gets kvaddr hence
+	 * can't be used to efficiently flush L1 and/or L2 which need paddr
+	 * Currently flush_cache_vmap nukes the L1 cache completely which
+	 * will be optimized as a separate commit
+	 */
+	dma_cache_wback_inv(page_to_phys(page), size);
+}
+
+/*
+ * Cache operations depending on function and direction argument, inspired by
+ * https://lore.kernel.org/lkml/20180518175004.GF17671@n2100.armlinux.org.uk
+ * "dma_sync_*_for_cpu and direction=TO_DEVICE (was Re: [PATCH 02/20]
+ * dma-mapping: provide a generic dma-noncoherent implementation)"
+ *
+ *          |   map          ==  for_device     |   unmap     ==  for_cpu
+ *          |----------------------------------------------------------------
+ * TO_DEV   |   writeback        writeback      |   none          none
+ * FROM_DEV |   invalidate       invalidate     |   invalidate*   invalidate*
+ * BIDIR    |   writeback+inv    writeback+inv  |   invalidate    invalidate
+ *
+ *     [*] needed for CPU speculative prefetches
+ *
+ * NOTE: we don't check the validity of direction argument as it is done in
+ * upper layer functions (in include/linux/dma-mapping.h)
+ */
+
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
+{
+	switch (dir) {
+	case DMA_TO_DEVICE:
+		dma_cache_wback(paddr, size);
+		break;
+
+	case DMA_FROM_DEVICE:
+		dma_cache_inv(paddr, size);
+		break;
+
+	case DMA_BIDIRECTIONAL:
+		dma_cache_wback_inv(paddr, size);
+		break;
+
+	default:
+		break;
+	}
+}
+
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
+{
+	switch (dir) {
+	case DMA_TO_DEVICE:
+		break;
+
+	/* FROM_DEVICE invalidate needed if speculative CPU prefetch only */
+	case DMA_FROM_DEVICE:
+	case DMA_BIDIRECTIONAL:
+		dma_cache_inv(paddr, size);
+		break;
+
+	default:
+		break;
+	}
+}
+
+/*
+ * Plug in direct dma map ops.
+ */
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+			const struct iommu_ops *iommu, bool coherent)
+{
+	/*
+	 * IOC hardware snoops all DMA traffic keeping the caches consistent
+	 * with memory - eliding need for any explicit cache maintenance of
+	 * DMA buffers.
+	 */
+	if (is_isa_arcv2() && ioc_enable && coherent)
+		dev->dma_coherent = true;
+
+	dev_info(dev, "use %scoherent DMA ops\n",
+		 dev->dma_coherent ? "" : "non");
+}
diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c
new file mode 100644
index 000000000..4e14c4244
--- /dev/null
+++ b/arch/arc/mm/extable.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Borrowed heavily from MIPS
+ */
+
+#include <linux/export.h>
+#include <linux/extable.h>
+#include <linux/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+
+	fixup = search_exception_tables(instruction_pointer(regs));
+	if (fixup) {
+		regs->ret = fixup->fixup;
+
+		return 1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+
+unsigned long arc_clear_user_noinline(void __user *to,
+		unsigned long n)
+{
+	return __arc_clear_user(to, n);
+}
+EXPORT_SYMBOL(arc_clear_user_noinline);
+
+#endif
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
new file mode 100644
index 000000000..f59e722d1
--- /dev/null
+++ b/arch/arc/mm/fault.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Page Fault Handling for ARC (TLB Miss / ProtV)
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/signal.h>
+#include <linux/interrupt.h>
+#include <linux/sched/signal.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/uaccess.h>
+#include <linux/kdebug.h>
+#include <linux/perf_event.h>
+#include <linux/mm_types.h>
+#include <asm/mmu.h>
+
+/*
+ * kernel virtual address is required to implement vmalloc/pkmap/fixmap
+ * Refer to asm/processor.h for System Memory Map
+ *
+ * It simply copies the PMD entry (pointer to 2nd level page table or hugepage)
+ * from swapper pgdir to task pgdir. The 2nd level table/page is thus shared
+ */
+noinline static int handle_kernel_vaddr_fault(unsigned long address)
+{
+	/*
+	 * Synchronize this task's top level page-table
+	 * with the 'reference' page table.
+	 */
+	pgd_t *pgd, *pgd_k;
+	p4d_t *p4d, *p4d_k;
+	pud_t *pud, *pud_k;
+	pmd_t *pmd, *pmd_k;
+
+	pgd = pgd_offset(current->active_mm, address);
+	pgd_k = pgd_offset_k(address);
+
+	if (pgd_none (*pgd_k))
+		goto bad_area;
+	if (!pgd_present(*pgd))
+		set_pgd(pgd, *pgd_k);
+
+	p4d = p4d_offset(pgd, address);
+	p4d_k = p4d_offset(pgd_k, address);
+	if (p4d_none(*p4d_k))
+		goto bad_area;
+	if (!p4d_present(*p4d))
+		set_p4d(p4d, *p4d_k);
+
+	pud = pud_offset(p4d, address);
+	pud_k = pud_offset(p4d_k, address);
+	if (pud_none(*pud_k))
+		goto bad_area;
+	if (!pud_present(*pud))
+		set_pud(pud, *pud_k);
+
+	pmd = pmd_offset(pud, address);
+	pmd_k = pmd_offset(pud_k, address);
+	if (pmd_none(*pmd_k))
+		goto bad_area;
+	if (!pmd_present(*pmd))
+		set_pmd(pmd, *pmd_k);
+
+	/* XXX: create the TLB entry here */
+	return 0;
+
+bad_area:
+	return 1;
+}
+
+void do_page_fault(unsigned long address, struct pt_regs *regs)
+{
+	struct vm_area_struct *vma = NULL;
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->mm;
+	int sig, si_code = SEGV_MAPERR;
+	unsigned int write = 0, exec = 0, mask;
+	vm_fault_t fault = VM_FAULT_SIGSEGV;	/* handle_mm_fault() output */
+	unsigned int flags;			/* handle_mm_fault() input */
+
+	/*
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 */
+	if (address >= VMALLOC_START && !user_mode(regs)) {
+		if (unlikely(handle_kernel_vaddr_fault(address)))
+			goto no_context;
+		else
+			return;
+	}
+
+	/*
+	 * If we're in an interrupt or have no user
+	 * context, we must not take the fault..
+	 */
+	if (faulthandler_disabled() || !mm)
+		goto no_context;
+
+	if (regs->ecr_cause & ECR_C_PROTV_STORE)	/* ST/EX */
+		write = 1;
+	else if ((regs->ecr_vec == ECR_V_PROTV) &&
+	         (regs->ecr_cause == ECR_C_PROTV_INST_FETCH))
+		exec = 1;
+
+	flags = FAULT_FLAG_DEFAULT;
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+	if (write)
+		flags |= FAULT_FLAG_WRITE;
+
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+retry:
+	vma = lock_mm_and_find_vma(mm, address, regs);
+	if (!vma)
+		goto bad_area_nosemaphore;
+
+	/*
+	 * vm_area is good, now check permissions for this memory access
+	 */
+	mask = VM_READ;
+	if (write)
+		mask = VM_WRITE;
+	if (exec)
+		mask = VM_EXEC;
+
+	if (!(vma->vm_flags & mask)) {
+		si_code = SEGV_ACCERR;
+		goto bad_area;
+	}
+
+	fault = handle_mm_fault(vma, address, flags, regs);
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return;
+	}
+
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
+		return;
+
+	/*
+	 * Fault retry nuances, mmap_lock already relinquished by core mm
+	 */
+	if (unlikely(fault & VM_FAULT_RETRY)) {
+		flags |= FAULT_FLAG_TRIED;
+		goto retry;
+	}
+
+bad_area:
+	mmap_read_unlock(mm);
+
+bad_area_nosemaphore:
+	/*
+	 * Major/minor page fault accounting
+	 * (in case of retry we only land here once)
+	 */
+	if (likely(!(fault & VM_FAULT_ERROR)))
+		/* Normal return path: fault Handled Gracefully */
+		return;
+
+	if (!user_mode(regs))
+		goto no_context;
+
+	if (fault & VM_FAULT_OOM) {
+		pagefault_out_of_memory();
+		return;
+	}
+
+	if (fault & VM_FAULT_SIGBUS) {
+		sig = SIGBUS;
+		si_code = BUS_ADRERR;
+	}
+	else {
+		sig = SIGSEGV;
+	}
+
+	tsk->thread.fault_address = address;
+	force_sig_fault(sig, si_code, (void __user *)address);
+	return;
+
+no_context:
+	if (fixup_exception(regs))
+		return;
+
+	die("Oops", regs, address);
+}
diff --git a/arch/arc/mm/highmem.c b/arch/arc/mm/highmem.c
new file mode 100644
index 000000000..c79912a6b
--- /dev/null
+++ b/arch/arc/mm/highmem.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/memblock.h>
+#include <linux/export.h>
+#include <linux/highmem.h>
+#include <linux/pgtable.h>
+#include <asm/processor.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * HIGHMEM API:
+ *
+ * kmap() API provides sleep semantics hence referred to as "permanent maps"
+ * It allows mapping LAST_PKMAP pages, using @last_pkmap_nr as the cursor
+ * for book-keeping
+ *
+ * kmap_atomic() can't sleep (calls pagefault_disable()), thus it provides
+ * shortlived ala "temporary mappings" which historically were implemented as
+ * fixmaps (compile time addr etc). Their book-keeping is done per cpu.
+ *
+ *	Both these facts combined (preemption disabled and per-cpu allocation)
+ *	means the total number of concurrent fixmaps will be limited to max
+ *	such allocations in a single control path. Thus KM_TYPE_NR (another
+ *	historic relic) is a small'ish number which caps max percpu fixmaps
+ *
+ * ARC HIGHMEM Details
+ *
+ * - the kernel vaddr space from 0x7z to 0x8z (currently used by vmalloc/module)
+ *   is now shared between vmalloc and kmap (non overlapping though)
+ *
+ * - Both fixmap/pkmap use a dedicated page table each, hooked up to swapper PGD
+ *   This means each only has 1 PGDIR_SIZE worth of kvaddr mappings, which means
+ *   2M of kvaddr space for typical config (8K page and 11:8:13 traversal split)
+ *
+ * - The fixed KMAP slots for kmap_local/atomic() require KM_MAX_IDX slots per
+ *   CPU. So the number of CPUs sharing a single PTE page is limited.
+ *
+ * - pkmap being preemptible, in theory could do with more than 256 concurrent
+ *   mappings. However, generic pkmap code: map_new_virtual(), doesn't traverse
+ *   the PGD and only works with a single page table @pkmap_page_table, hence
+ *   sets the limit
+ */
+
+extern pte_t * pkmap_page_table;
+
+static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr)
+{
+	pmd_t *pmd_k = pmd_off_k(kvaddr);
+	pte_t *pte_k;
+
+	pte_k = (pte_t *)memblock_alloc_low(PAGE_SIZE, PAGE_SIZE);
+	if (!pte_k)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE);
+
+	pmd_populate_kernel(&init_mm, pmd_k, pte_k);
+	return pte_k;
+}
+
+void __init kmap_init(void)
+{
+	/* Due to recursive include hell, we can't do this in processor.h */
+	BUILD_BUG_ON(PAGE_OFFSET < (VMALLOC_END + FIXMAP_SIZE + PKMAP_SIZE));
+	BUILD_BUG_ON(LAST_PKMAP > PTRS_PER_PTE);
+	BUILD_BUG_ON(FIX_KMAP_SLOTS > PTRS_PER_PTE);
+
+	pkmap_page_table = alloc_kmap_pgtable(PKMAP_BASE);
+	alloc_kmap_pgtable(FIXMAP_BASE);
+}
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
new file mode 100644
index 000000000..ce4e939a7
--- /dev/null
+++ b/arch/arc/mm/init.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/memblock.h>
+#ifdef CONFIG_BLK_DEV_INITRD
+#include <linux/initrd.h>
+#endif
+#include <linux/of_fdt.h>
+#include <linux/swap.h>
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+#include <asm/arcregs.h>
+
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
+char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
+EXPORT_SYMBOL(empty_zero_page);
+
+static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE;
+static unsigned long low_mem_sz;
+
+#ifdef CONFIG_HIGHMEM
+static unsigned long min_high_pfn, max_high_pfn;
+static phys_addr_t high_mem_start;
+static phys_addr_t high_mem_sz;
+unsigned long arch_pfn_offset;
+EXPORT_SYMBOL(arch_pfn_offset);
+#endif
+
+long __init arc_get_mem_sz(void)
+{
+	return low_mem_sz;
+}
+
+/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
+static int __init setup_mem_sz(char *str)
+{
+	low_mem_sz = memparse(str, NULL) & PAGE_MASK;
+
+	/* early console might not be setup yet - it will show up later */
+	pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
+
+	return 0;
+}
+early_param("mem", setup_mem_sz);
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+	int in_use = 0;
+
+	if (!low_mem_sz) {
+		if (base != low_mem_start)
+			panic("CONFIG_LINUX_RAM_BASE != DT memory { }");
+
+		low_mem_sz = size;
+		in_use = 1;
+		memblock_add_node(base, size, 0, MEMBLOCK_NONE);
+	} else {
+#ifdef CONFIG_HIGHMEM
+		high_mem_start = base;
+		high_mem_sz = size;
+		in_use = 1;
+		memblock_add_node(base, size, 1, MEMBLOCK_NONE);
+		memblock_reserve(base, size);
+#endif
+	}
+
+	pr_info("Memory @ %llx [%lldM] %s\n",
+		base, TO_MB(size), !in_use ? "Not used":"");
+}
+
+bool arch_has_descending_max_zone_pfns(void)
+{
+	return !IS_ENABLED(CONFIG_ARC_HAS_PAE40);
+}
+
+/*
+ * First memory setup routine called from setup_arch()
+ * 1. setup swapper's mm @init_mm
+ * 2. Count the pages we have and setup bootmem allocator
+ * 3. zone setup
+ */
+void __init setup_arch_memory(void)
+{
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
+
+	setup_initial_init_mm(_text, _etext, _edata, _end);
+
+	/* first page of system - kernel .vector starts here */
+	min_low_pfn = virt_to_pfn(CONFIG_LINUX_RAM_BASE);
+
+	/* Last usable page of low mem */
+	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
+
+	/*------------- bootmem allocator setup -----------------------*/
+
+	/*
+	 * seed the bootmem allocator after any DT memory node parsing or
+	 * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
+	 *
+	 * Only low mem is added, otherwise we have crashes when allocating
+	 * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
+	 * avail memory, ending in highmem with a > 32-bit address. However
+	 * it then tries to memset it with a truncaed 32-bit handle, causing
+	 * the crash
+	 */
+
+	memblock_reserve(CONFIG_LINUX_LINK_BASE,
+			 __pa(_end) - CONFIG_LINUX_LINK_BASE);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (phys_initrd_size) {
+		memblock_reserve(phys_initrd_start, phys_initrd_size);
+		initrd_start = (unsigned long)__va(phys_initrd_start);
+		initrd_end = initrd_start + phys_initrd_size;
+	}
+#endif
+
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
+
+	memblock_dump_all();
+
+	/*----------------- node/zones setup --------------------------*/
+	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
+
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
+	 * than addresses in normal aka low memory (0x8000_0000 based).
+	 * Even with PAE, the huge peripheral space hole would waste a lot of
+	 * mem with single contiguous mem_map[].
+	 * Thus when HIGHMEM on ARC is enabled the memory map corresponding
+	 * to the hole is freed and ARC specific version of pfn_valid()
+	 * handles the hole in the memory map.
+	 */
+
+	min_high_pfn = PFN_DOWN(high_mem_start);
+	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+
+	/*
+	 * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+	 * For HIGHMEM without PAE max_high_pfn should be less than
+	 * min_low_pfn to guarantee that these two regions don't overlap.
+	 * For PAE case highmem is greater than lowmem, so it is natural
+	 * to use max_high_pfn.
+	 *
+	 * In both cases, holes should be handled by pfn_valid().
+	 */
+	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
+
+	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
+
+	arch_pfn_offset = min(min_low_pfn, min_high_pfn);
+	kmap_init();
+
+#else /* CONFIG_HIGHMEM */
+	/* pfn_valid() uses this when FLATMEM=y and HIGHMEM=n */
+	max_mapnr = max_low_pfn - min_low_pfn;
+
+#endif /* CONFIG_HIGHMEM */
+
+	free_area_init(max_zone_pfn);
+}
+
+static void __init highmem_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+	unsigned long tmp;
+
+	memblock_phys_free(high_mem_start, high_mem_sz);
+	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
+		free_highmem_page(pfn_to_page(tmp));
+#endif
+}
+
+/*
+ * mem_init - initializes memory
+ *
+ * Frees up bootmem
+ * Calculates and displays memory available/used
+ */
+void __init mem_init(void)
+{
+	memblock_free_all();
+	highmem_init();
+
+	BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PMD * sizeof(pmd_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PTE * sizeof(pte_t)) > PAGE_SIZE);
+}
+
+#ifdef CONFIG_HIGHMEM
+int pfn_valid(unsigned long pfn)
+{
+	return (pfn >= min_high_pfn && pfn <= max_high_pfn) ||
+		(pfn >= min_low_pfn && pfn <= max_low_pfn);
+}
+EXPORT_SYMBOL(pfn_valid);
+#endif
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
new file mode 100644
index 000000000..712c2311d
--- /dev/null
+++ b/arch/arc/mm/ioremap.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/cache.h>
+
+static inline bool arc_uncached_addr_space(phys_addr_t paddr)
+{
+	if (is_isa_arcompact()) {
+		if (paddr >= ARC_UNCACHED_ADDR_SPACE)
+			return true;
+	} else if (paddr >= perip_base && paddr <= perip_end) {
+		return true;
+	}
+
+	return false;
+}
+
+void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
+{
+	phys_addr_t end;
+
+	/* Don't allow wraparound or zero size */
+	end = paddr + size - 1;
+	if (!size || (end < paddr))
+		return NULL;
+
+	/*
+	 * If the region is h/w uncached, MMU mapping can be elided as optim
+	 * The cast to u32 is fine as this region can only be inside 4GB
+	 */
+	if (arc_uncached_addr_space(paddr))
+		return (void __iomem *)(u32)paddr;
+
+	return ioremap_prot(paddr, size,
+			    pgprot_val(pgprot_noncached(PAGE_KERNEL)));
+}
+EXPORT_SYMBOL(ioremap);
+
+/*
+ * ioremap with access flags
+ * Cache semantics wise it is same as ioremap - "forced" uncached.
+ * However unlike vanilla ioremap which bypasses ARC MMU for addresses in
+ * ARC hardware uncached region, this one still goes thru the MMU as caller
+ * might need finer access control (R/W/X)
+ */
+void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
+			   unsigned long flags)
+{
+	unsigned int off;
+	unsigned long vaddr;
+	struct vm_struct *area;
+	phys_addr_t end;
+	pgprot_t prot = __pgprot(flags);
+
+	/* Don't allow wraparound, zero size */
+	end = paddr + size - 1;
+	if ((!size) || (end < paddr))
+		return NULL;
+
+	/* An early platform driver might end up here */
+	if (!slab_is_available())
+		return NULL;
+
+	/* force uncached */
+	prot = pgprot_noncached(prot);
+
+	/* Mappings have to be page-aligned */
+	off = paddr & ~PAGE_MASK;
+	paddr &= PAGE_MASK_PHYS;
+	size = PAGE_ALIGN(end + 1) - paddr;
+
+	/*
+	 * Ok, go for it..
+	 */
+	area = get_vm_area(size, VM_IOREMAP);
+	if (!area)
+		return NULL;
+	area->phys_addr = paddr;
+	vaddr = (unsigned long)area->addr;
+	if (ioremap_page_range(vaddr, vaddr + size, paddr, prot)) {
+		vunmap((void __force *)vaddr);
+		return NULL;
+	}
+	return (void __iomem *)(off + (char __iomem *)vaddr);
+}
+EXPORT_SYMBOL(ioremap_prot);
+
+
+void iounmap(const volatile void __iomem *addr)
+{
+	/* weird double cast to handle phys_addr_t > 32 bits */
+	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
+		return;
+
+	vfree((void *)(PAGE_MASK & (unsigned long __force)addr));
+}
+EXPORT_SYMBOL(iounmap);
diff --git a/arch/arc/mm/mmap.c b/arch/arc/mm/mmap.c
new file mode 100644
index 000000000..fce5fa2b4
--- /dev/null
+++ b/arch/arc/mm/mmap.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARC700 mmap
+ *
+ * (started from arm version - for VIPT alias handling)
+ *
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/sched/mm.h>
+
+#include <asm/cacheflush.h>
+
+#define COLOUR_ALIGN(addr, pgoff)			\
+	((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) +	\
+	 (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1)))
+
+/*
+ * Ensure that shared mappings are correctly aligned to
+ * avoid aliasing issues with VIPT caches.
+ * We need to ensure that
+ * a specific page of an object is always mapped at a multiple of
+ * SHMLBA bytes.
+ */
+unsigned long
+arch_get_unmapped_area(struct file *filp, unsigned long addr,
+		unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	int do_align = 0;
+	int aliasing = cache_is_vipt_aliasing();
+	struct vm_unmapped_area_info info;
+
+	/*
+	 * We only need to do colour alignment if D cache aliases.
+	 */
+	if (aliasing)
+		do_align = filp || (flags & MAP_SHARED);
+
+	/*
+	 * We enforce the MAP_FIXED case.
+	 */
+	if (flags & MAP_FIXED) {
+		if (aliasing && flags & MAP_SHARED &&
+		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
+			return -EINVAL;
+		return addr;
+	}
+
+	if (len > TASK_SIZE)
+		return -ENOMEM;
+
+	if (addr) {
+		if (do_align)
+			addr = COLOUR_ALIGN(addr, pgoff);
+		else
+			addr = PAGE_ALIGN(addr);
+
+		vma = find_vma(mm, addr);
+		if (TASK_SIZE - len >= addr &&
+		    (!vma || addr + len <= vm_start_gap(vma)))
+			return addr;
+	}
+
+	info.flags = 0;
+	info.length = len;
+	info.low_limit = mm->mmap_base;
+	info.high_limit = TASK_SIZE;
+	info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
+	info.align_offset = pgoff << PAGE_SHIFT;
+	return vm_unmapped_area(&info);
+}
+
+static const pgprot_t protection_map[16] = {
+	[VM_NONE]					= PAGE_U_NONE,
+	[VM_READ]					= PAGE_U_R,
+	[VM_WRITE]					= PAGE_U_R,
+	[VM_WRITE | VM_READ]				= PAGE_U_R,
+	[VM_EXEC]					= PAGE_U_X_R,
+	[VM_EXEC | VM_READ]				= PAGE_U_X_R,
+	[VM_EXEC | VM_WRITE]				= PAGE_U_X_R,
+	[VM_EXEC | VM_WRITE | VM_READ]			= PAGE_U_X_R,
+	[VM_SHARED]					= PAGE_U_NONE,
+	[VM_SHARED | VM_READ]				= PAGE_U_R,
+	[VM_SHARED | VM_WRITE]				= PAGE_U_W_R,
+	[VM_SHARED | VM_WRITE | VM_READ]		= PAGE_U_W_R,
+	[VM_SHARED | VM_EXEC]				= PAGE_U_X_R,
+	[VM_SHARED | VM_EXEC | VM_READ]			= PAGE_U_X_R,
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= PAGE_U_X_W_R,
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= PAGE_U_X_W_R
+};
+DECLARE_VM_GET_PAGE_PROT
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
new file mode 100644
index 000000000..5f71445f2
--- /dev/null
+++ b/arch/arc/mm/tlb.c
@@ -0,0 +1,780 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TLB Management (flush/create/diagnostics) for MMUv3 and MMUv4
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/bug.h>
+#include <linux/mm_types.h>
+
+#include <asm/arcregs.h>
+#include <asm/setup.h>
+#include <asm/mmu_context.h>
+#include <asm/mmu.h>
+
+/* A copy of the ASID from the PID reg is kept in asid_cache */
+DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE;
+
+static int __read_mostly pae_exists;
+
+/*
+ * Utility Routine to erase a J-TLB entry
+ * Caller needs to setup Index Reg (manually or via getIndex)
+ */
+static inline void __tlb_entry_erase(void)
+{
+	write_aux_reg(ARC_REG_TLBPD1, 0);
+
+	if (is_pae40_enabled())
+		write_aux_reg(ARC_REG_TLBPD1HI, 0);
+
+	write_aux_reg(ARC_REG_TLBPD0, 0);
+	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+}
+
+static void utlb_invalidate(void)
+{
+	write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
+}
+
+#ifdef CONFIG_ARC_MMU_V3
+
+static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid)
+{
+	unsigned int idx;
+
+	write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid);
+
+	write_aux_reg(ARC_REG_TLBCOMMAND, TLBProbe);
+	idx = read_aux_reg(ARC_REG_TLBINDEX);
+
+	return idx;
+}
+
+static void tlb_entry_erase(unsigned int vaddr_n_asid)
+{
+	unsigned int idx;
+
+	/* Locate the TLB entry for this vaddr + ASID */
+	idx = tlb_entry_lkup(vaddr_n_asid);
+
+	/* No error means entry found, zero it out */
+	if (likely(!(idx & TLB_LKUP_ERR))) {
+		__tlb_entry_erase();
+	} else {
+		/* Duplicate entry error */
+		WARN(idx == TLB_DUP_ERR, "Probe returned Dup PD for %x\n",
+					   vaddr_n_asid);
+	}
+}
+
+static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
+{
+	unsigned int idx;
+
+	/*
+	 * First verify if entry for this vaddr+ASID already exists
+	 * This also sets up PD0 (vaddr, ASID..) for final commit
+	 */
+	idx = tlb_entry_lkup(pd0);
+
+	/*
+	 * If Not already present get a free slot from MMU.
+	 * Otherwise, Probe would have located the entry and set INDEX Reg
+	 * with existing location. This will cause Write CMD to over-write
+	 * existing entry with new PD0 and PD1
+	 */
+	if (likely(idx & TLB_LKUP_ERR))
+		write_aux_reg(ARC_REG_TLBCOMMAND, TLBGetIndex);
+
+	/* setup the other half of TLB entry (pfn, rwx..) */
+	write_aux_reg(ARC_REG_TLBPD1, pd1);
+
+	/*
+	 * Commit the Entry to MMU
+	 * It doesn't sound safe to use the TLBWriteNI cmd here
+	 * which doesn't flush uTLBs. I'd rather be safe than sorry.
+	 */
+	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+}
+
+#else	/* MMUv4 */
+
+static void tlb_entry_erase(unsigned int vaddr_n_asid)
+{
+	write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid | _PAGE_PRESENT);
+	write_aux_reg(ARC_REG_TLBCOMMAND, TLBDeleteEntry);
+}
+
+static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
+{
+	write_aux_reg(ARC_REG_TLBPD0, pd0);
+
+	if (!is_pae40_enabled()) {
+		write_aux_reg(ARC_REG_TLBPD1, pd1);
+	} else {
+		write_aux_reg(ARC_REG_TLBPD1, pd1 & 0xFFFFFFFF);
+		write_aux_reg(ARC_REG_TLBPD1HI, (u64)pd1 >> 32);
+	}
+
+	write_aux_reg(ARC_REG_TLBCOMMAND, TLBInsertEntry);
+}
+
+#endif
+
+/*
+ * Un-conditionally (without lookup) erase the entire MMU contents
+ */
+
+noinline void local_flush_tlb_all(void)
+{
+	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	unsigned long flags;
+	unsigned int entry;
+	int num_tlb = mmu->sets * mmu->ways;
+
+	local_irq_save(flags);
+
+	/* Load PD0 and PD1 with template for a Blank Entry */
+	write_aux_reg(ARC_REG_TLBPD1, 0);
+
+	if (is_pae40_enabled())
+		write_aux_reg(ARC_REG_TLBPD1HI, 0);
+
+	write_aux_reg(ARC_REG_TLBPD0, 0);
+
+	for (entry = 0; entry < num_tlb; entry++) {
+		/* write this entry to the TLB */
+		write_aux_reg(ARC_REG_TLBINDEX, entry);
+		write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI);
+	}
+
+	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
+		const int stlb_idx = 0x800;
+
+		/* Blank sTLB entry */
+		write_aux_reg(ARC_REG_TLBPD0, _PAGE_HW_SZ);
+
+		for (entry = stlb_idx; entry < stlb_idx + 16; entry++) {
+			write_aux_reg(ARC_REG_TLBINDEX, entry);
+			write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI);
+		}
+	}
+
+	utlb_invalidate();
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Flush the entire MM for userland. The fastest way is to move to Next ASID
+ */
+noinline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	/*
+	 * Small optimisation courtesy IA64
+	 * flush_mm called during fork,exit,munmap etc, multiple times as well.
+	 * Only for fork( ) do we need to move parent to a new MMU ctxt,
+	 * all other cases are NOPs, hence this check.
+	 */
+	if (atomic_read(&mm->mm_users) == 0)
+		return;
+
+	/*
+	 * - Move to a new ASID, but only if the mm is still wired in
+	 *   (Android Binder ended up calling this for vma->mm != tsk->mm,
+	 *    causing h/w - s/w ASID to get out of sync)
+	 * - Also get_new_mmu_context() new implementation allocates a new
+	 *   ASID only if it is not allocated already - so unallocate first
+	 */
+	destroy_context(mm);
+	if (current->mm == mm)
+		get_new_mmu_context(mm);
+}
+
+/*
+ * Flush a Range of TLB entries for userland.
+ * @start is inclusive, while @end is exclusive
+ * Difference between this and Kernel Range Flush is
+ *  -Here the fastest way (if range is too large) is to move to next ASID
+ *      without doing any explicit Shootdown
+ *  -In case of kernel Flush, entry has to be shot down explicitly
+ */
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			   unsigned long end)
+{
+	const unsigned int cpu = smp_processor_id();
+	unsigned long flags;
+
+	/* If range @start to @end is more than 32 TLB entries deep,
+	 * its better to move to a new ASID rather than searching for
+	 * individual entries and then shooting them down
+	 *
+	 * The calc above is rough, doesn't account for unaligned parts,
+	 * since this is heuristics based anyways
+	 */
+	if (unlikely((end - start) >= PAGE_SIZE * 32)) {
+		local_flush_tlb_mm(vma->vm_mm);
+		return;
+	}
+
+	/*
+	 * @start moved to page start: this alone suffices for checking
+	 * loop end condition below, w/o need for aligning @end to end
+	 * e.g. 2000 to 4001 will anyhow loop twice
+	 */
+	start &= PAGE_MASK;
+
+	local_irq_save(flags);
+
+	if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) {
+		while (start < end) {
+			tlb_entry_erase(start | hw_pid(vma->vm_mm, cpu));
+			start += PAGE_SIZE;
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+/* Flush the kernel TLB entries - vmalloc/modules (Global from MMU perspective)
+ *  @start, @end interpreted as kvaddr
+ * Interestingly, shared TLB entries can also be flushed using just
+ * @start,@end alone (interpreted as user vaddr), although technically SASID
+ * is also needed. However our smart TLbProbe lookup takes care of that.
+ */
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	unsigned long flags;
+
+	/* exactly same as above, except for TLB entry not taking ASID */
+
+	if (unlikely((end - start) >= PAGE_SIZE * 32)) {
+		local_flush_tlb_all();
+		return;
+	}
+
+	start &= PAGE_MASK;
+
+	local_irq_save(flags);
+	while (start < end) {
+		tlb_entry_erase(start);
+		start += PAGE_SIZE;
+	}
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Delete TLB entry in MMU for a given page (??? address)
+ * NOTE One TLB entry contains translation for single PAGE
+ */
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	const unsigned int cpu = smp_processor_id();
+	unsigned long flags;
+
+	/* Note that it is critical that interrupts are DISABLED between
+	 * checking the ASID and using it flush the TLB entry
+	 */
+	local_irq_save(flags);
+
+	if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) {
+		tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu));
+	}
+
+	local_irq_restore(flags);
+}
+
+#ifdef CONFIG_SMP
+
+struct tlb_args {
+	struct vm_area_struct *ta_vma;
+	unsigned long ta_start;
+	unsigned long ta_end;
+};
+
+static inline void ipi_flush_tlb_page(void *arg)
+{
+	struct tlb_args *ta = arg;
+
+	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_range(void *arg)
+{
+	struct tlb_args *ta = arg;
+
+	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline void ipi_flush_pmd_tlb_range(void *arg)
+{
+	struct tlb_args *ta = arg;
+
+	local_flush_pmd_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+}
+#endif
+
+static inline void ipi_flush_tlb_kernel_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu((smp_call_func_t)local_flush_tlb_all, NULL, 1);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	on_each_cpu_mask(mm_cpumask(mm), (smp_call_func_t)local_flush_tlb_mm,
+			 mm, 1);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	struct tlb_args ta = {
+		.ta_vma = vma,
+		.ta_start = uaddr
+	};
+
+	on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_page, &ta, 1);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+		     unsigned long end)
+{
+	struct tlb_args ta = {
+		.ta_vma = vma,
+		.ta_start = start,
+		.ta_end = end
+	};
+
+	on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_range, &ta, 1);
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			 unsigned long end)
+{
+	struct tlb_args ta = {
+		.ta_vma = vma,
+		.ta_start = start,
+		.ta_end = end
+	};
+
+	on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_pmd_tlb_range, &ta, 1);
+}
+#endif
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	struct tlb_args ta = {
+		.ta_start = start,
+		.ta_end = end
+	};
+
+	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+}
+#endif
+
+/*
+ * Routine to create a TLB entry
+ */
+void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
+{
+	unsigned long flags;
+	unsigned int asid_or_sasid, rwx;
+	unsigned long pd0;
+	phys_addr_t pd1;
+
+	/*
+	 * create_tlb() assumes that current->mm == vma->mm, since
+	 * -it ASID for TLB entry is fetched from MMU ASID reg (valid for curr)
+	 * -completes the lazy write to SASID reg (again valid for curr tsk)
+	 *
+	 * Removing the assumption involves
+	 * -Using vma->mm->context{ASID,SASID}, as opposed to MMU reg.
+	 * -More importantly it makes this handler inconsistent with fast-path
+	 *  TLB Refill handler which always deals with "current"
+	 *
+	 * Lets see the use cases when current->mm != vma->mm and we land here
+	 *  1. execve->copy_strings()->__get_user_pages->handle_mm_fault
+	 *     Here VM wants to pre-install a TLB entry for user stack while
+	 *     current->mm still points to pre-execve mm (hence the condition).
+	 *     However the stack vaddr is soon relocated (randomization) and
+	 *     move_page_tables() tries to undo that TLB entry.
+	 *     Thus not creating TLB entry is not any worse.
+	 *
+	 *  2. ptrace(POKETEXT) causes a CoW - debugger(current) inserting a
+	 *     breakpoint in debugged task. Not creating a TLB now is not
+	 *     performance critical.
+	 *
+	 * Both the cases above are not good enough for code churn.
+	 */
+	if (current->active_mm != vma->vm_mm)
+		return;
+
+	local_irq_save(flags);
+
+	vaddr &= PAGE_MASK;
+
+	/* update this PTE credentials */
+	pte_val(*ptep) |= (_PAGE_PRESENT | _PAGE_ACCESSED);
+
+	/* Create HW TLB(PD0,PD1) from PTE  */
+
+	/* ASID for this task */
+	asid_or_sasid = read_aux_reg(ARC_REG_PID) & 0xff;
+
+	pd0 = vaddr | asid_or_sasid | (pte_val(*ptep) & PTE_BITS_IN_PD0);
+
+	/*
+	 * ARC MMU provides fully orthogonal access bits for K/U mode,
+	 * however Linux only saves 1 set to save PTE real-estate
+	 * Here we convert 3 PTE bits into 6 MMU bits:
+	 * -Kernel only entries have Kr Kw Kx 0 0 0
+	 * -User entries have mirrored K and U bits
+	 */
+	rwx = pte_val(*ptep) & PTE_BITS_RWX;
+
+	if (pte_val(*ptep) & _PAGE_GLOBAL)
+		rwx <<= 3;		/* r w x => Kr Kw Kx 0 0 0 */
+	else
+		rwx |= (rwx << 3);	/* r w x => Kr Kw Kx Ur Uw Ux */
+
+	pd1 = rwx | (pte_val(*ptep) & PTE_BITS_NON_RWX_IN_PD1);
+
+	tlb_entry_insert(pd0, pd1);
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Called at the end of pagefault, for a userspace mapped page
+ *  -pre-install the corresponding TLB entry into MMU
+ *  -Finalize the delayed D-cache flush of kernel mapping of page due to
+ *  	flush_dcache_page(), copy_user_page()
+ *
+ * Note that flush (when done) involves both WBACK - so physical page is
+ * in sync as well as INV - so any non-congruent aliases don't remain
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
+		      pte_t *ptep)
+{
+	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
+	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
+	struct page *page = pfn_to_page(pte_pfn(*ptep));
+
+	create_tlb(vma, vaddr, ptep);
+
+	if (page == ZERO_PAGE(0)) {
+		return;
+	}
+
+	/*
+	 * Exec page : Independent of aliasing/page-color considerations,
+	 *	       since icache doesn't snoop dcache on ARC, any dirty
+	 *	       K-mapping of a code page needs to be wback+inv so that
+	 *	       icache fetch by userspace sees code correctly.
+	 * !EXEC page: If K-mapping is NOT congruent to U-mapping, flush it
+	 *	       so userspace sees the right data.
+	 *  (Avoids the flush for Non-exec + congruent mapping case)
+	 */
+	if ((vma->vm_flags & VM_EXEC) ||
+	     addr_not_cache_congruent(paddr, vaddr)) {
+
+		int dirty = !test_and_set_bit(PG_dc_clean, &page->flags);
+		if (dirty) {
+			/* wback + inv dcache lines (K-mapping) */
+			__flush_dcache_page(paddr, paddr);
+
+			/* invalidate any existing icache lines (U-mapping) */
+			if (vma->vm_flags & VM_EXEC)
+				__inv_icache_page(paddr, vaddr);
+		}
+	}
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+
+/*
+ * MMUv4 in HS38x cores supports Super Pages which are basis for Linux THP
+ * support.
+ *
+ * Normal and Super pages can co-exist (ofcourse not overlap) in TLB with a
+ * new bit "SZ" in TLB page descriptor to distinguish between them.
+ * Super Page size is configurable in hardware (4K to 16M), but fixed once
+ * RTL builds.
+ *
+ * The exact THP size a Linux configuration will support is a function of:
+ *  - MMU page size (typical 8K, RTL fixed)
+ *  - software page walker address split between PGD:PTE:PFN (typical
+ *    11:8:13, but can be changed with 1 line)
+ * So for above default, THP size supported is 8K * (2^8) = 2M
+ *
+ * Default Page Walker is 2 levels, PGD:PTE:PFN, which in THP regime
+ * reduces to 1 level (as PTE is folded into PGD and canonically referred
+ * to as PMD).
+ * Thus THP PMD accessors are implemented in terms of PTE (just like sparc)
+ */
+
+void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
+				 pmd_t *pmd)
+{
+	pte_t pte = __pte(pmd_val(*pmd));
+	update_mmu_cache(vma, addr, &pte);
+}
+
+void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			       unsigned long end)
+{
+	unsigned int cpu;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	cpu = smp_processor_id();
+
+	if (likely(asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID)) {
+		unsigned int asid = hw_pid(vma->vm_mm, cpu);
+
+		/* No need to loop here: this will always be for 1 Huge Page */
+		tlb_entry_erase(start | _PAGE_HW_SZ | asid);
+	}
+
+	local_irq_restore(flags);
+}
+
+#endif
+
+/* Read the Cache Build Configuration Registers, Decode them and save into
+ * the cpuinfo structure for later use.
+ * No Validation is done here, simply read/convert the BCRs
+ */
+void read_decode_mmu_bcr(void)
+{
+	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	unsigned int tmp;
+	struct bcr_mmu_3 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
+		     u_itlb:4, u_dtlb:4;
+#else
+	unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4,
+		     ways:4, ver:8;
+#endif
+	} *mmu3;
+
+	struct bcr_mmu_4 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ver:8, sasid:1, sz1:4, sz0:4, res:2, pae:1,
+		     n_ways:2, n_entry:2, n_super:2, u_itlb:3, u_dtlb:3;
+#else
+	/*           DTLB      ITLB      JES        JE         JA      */
+	unsigned int u_dtlb:3, u_itlb:3, n_super:2, n_entry:2, n_ways:2,
+		     pae:1, res:2, sz0:4, sz1:4, sasid:1, ver:8;
+#endif
+	} *mmu4;
+
+	tmp = read_aux_reg(ARC_REG_MMU_BCR);
+	mmu->ver = (tmp >> 24);
+
+	if (is_isa_arcompact() && mmu->ver == 3) {
+		mmu3 = (struct bcr_mmu_3 *)&tmp;
+		mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1);
+		mmu->sets = 1 << mmu3->sets;
+		mmu->ways = 1 << mmu3->ways;
+		mmu->u_dtlb = mmu3->u_dtlb;
+		mmu->u_itlb = mmu3->u_itlb;
+		mmu->sasid = mmu3->sasid;
+	} else {
+		mmu4 = (struct bcr_mmu_4 *)&tmp;
+		mmu->pg_sz_k = 1 << (mmu4->sz0 - 1);
+		mmu->s_pg_sz_m = 1 << (mmu4->sz1 - 11);
+		mmu->sets = 64 << mmu4->n_entry;
+		mmu->ways = mmu4->n_ways * 2;
+		mmu->u_dtlb = mmu4->u_dtlb * 4;
+		mmu->u_itlb = mmu4->u_itlb * 4;
+		mmu->sasid = mmu4->sasid;
+		pae_exists = mmu->pae = mmu4->pae;
+	}
+}
+
+char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
+{
+	int n = 0;
+	struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu;
+	char super_pg[64] = "";
+
+	if (p_mmu->s_pg_sz_m)
+		scnprintf(super_pg, 64, "%dM Super Page %s",
+			  p_mmu->s_pg_sz_m,
+			  IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE));
+
+	n += scnprintf(buf + n, len - n,
+		      "MMU [v%x]\t: %dk PAGE, %s, swalk %d lvl, JTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
+		       p_mmu->ver, p_mmu->pg_sz_k, super_pg,  CONFIG_PGTABLE_LEVELS,
+		       p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways,
+		       p_mmu->u_dtlb, p_mmu->u_itlb,
+		       IS_AVAIL2(p_mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
+
+	return buf;
+}
+
+int pae40_exist_but_not_enab(void)
+{
+	return pae_exists && !is_pae40_enabled();
+}
+
+void arc_mmu_init(void)
+{
+	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	char str[256];
+	int compat = 0;
+
+	pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str)));
+
+	/*
+	 * Can't be done in processor.h due to header include dependencies
+	 */
+	BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_KVADDR_SIZE << 20), PMD_SIZE));
+
+	/*
+	 * stack top size sanity check,
+	 * Can't be done in processor.h due to header include dependencies
+	 */
+	BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));
+
+	/*
+	 * Ensure that MMU features assumed by kernel exist in hardware.
+	 *  - For older ARC700 cpus, only v3 supported
+	 *  - For HS cpus, v4 was baseline and v5 is backwards compatible
+	 *    (will run older software).
+	 */
+	if (is_isa_arcompact() && mmu->ver == 3)
+		compat = 1;
+	else if (is_isa_arcv2() && mmu->ver >= 4)
+		compat = 1;
+
+	if (!compat)
+		panic("MMU ver %d doesn't match kernel built for\n", mmu->ver);
+
+	if (mmu->pg_sz_k != TO_KB(PAGE_SIZE))
+		panic("MMU pg size != PAGE_SIZE (%luk)\n", TO_KB(PAGE_SIZE));
+
+	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
+	    mmu->s_pg_sz_m != TO_MB(HPAGE_PMD_SIZE))
+		panic("MMU Super pg size != Linux HPAGE_PMD_SIZE (%luM)\n",
+		      (unsigned long)TO_MB(HPAGE_PMD_SIZE));
+
+	if (IS_ENABLED(CONFIG_ARC_HAS_PAE40) && !mmu->pae)
+		panic("Hardware doesn't support PAE40\n");
+
+	/* Enable the MMU with ASID 0 */
+	mmu_setup_asid(NULL, 0);
+
+	/* cache the pgd pointer in MMU SCRATCH reg (ARCv2 only) */
+	mmu_setup_pgd(NULL, swapper_pg_dir);
+
+	if (pae40_exist_but_not_enab())
+		write_aux_reg(ARC_REG_TLBPD1HI, 0);
+}
+
+/*
+ * TLB Programmer's Model uses Linear Indexes: 0 to {255, 511} for 128 x {2,4}
+ * The mapping is Column-first.
+ *		---------------------	-----------
+ *		|way0|way1|way2|way3|	|way0|way1|
+ *		---------------------	-----------
+ * [set0]	|  0 |  1 |  2 |  3 |	|  0 |  1 |
+ * [set1]	|  4 |  5 |  6 |  7 |	|  2 |  3 |
+ *		~		    ~	~	  ~
+ * [set127]	| 508| 509| 510| 511|	| 254| 255|
+ *		---------------------	-----------
+ * For normal operations we don't(must not) care how above works since
+ * MMU cmd getIndex(vaddr) abstracts that out.
+ * However for walking WAYS of a SET, we need to know this
+ */
+#define SET_WAY_TO_IDX(mmu, set, way)  ((set) * mmu->ways + (way))
+
+/* Handling of Duplicate PD (TLB entry) in MMU.
+ * -Could be due to buggy customer tapeouts or obscure kernel bugs
+ * -MMU complaints not at the time of duplicate PD installation, but at the
+ *      time of lookup matching multiple ways.
+ * -Ideally these should never happen - but if they do - workaround by deleting
+ *      the duplicate one.
+ * -Knob to be verbose abt it.(TODO: hook them up to debugfs)
+ */
+volatile int dup_pd_silent; /* Be silent abt it or complain (default) */
+
+void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
+			  struct pt_regs *regs)
+{
+	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	unsigned long flags;
+	int set, n_ways = mmu->ways;
+
+	n_ways = min(n_ways, 4);
+	BUG_ON(mmu->ways > 4);
+
+	local_irq_save(flags);
+
+	/* loop thru all sets of TLB */
+	for (set = 0; set < mmu->sets; set++) {
+
+		int is_valid, way;
+		unsigned int pd0[4];
+
+		/* read out all the ways of current set */
+		for (way = 0, is_valid = 0; way < n_ways; way++) {
+			write_aux_reg(ARC_REG_TLBINDEX,
+					  SET_WAY_TO_IDX(mmu, set, way));
+			write_aux_reg(ARC_REG_TLBCOMMAND, TLBRead);
+			pd0[way] = read_aux_reg(ARC_REG_TLBPD0);
+			is_valid |= pd0[way] & _PAGE_PRESENT;
+			pd0[way] &= PAGE_MASK;
+		}
+
+		/* If all the WAYS in SET are empty, skip to next SET */
+		if (!is_valid)
+			continue;
+
+		/* Scan the set for duplicate ways: needs a nested loop */
+		for (way = 0; way < n_ways - 1; way++) {
+
+			int n;
+
+			if (!pd0[way])
+				continue;
+
+			for (n = way + 1; n < n_ways; n++) {
+				if (pd0[way] != pd0[n])
+					continue;
+
+				if (!dup_pd_silent)
+					pr_info("Dup TLB PD0 %08x @ set %d ways %d,%d\n",
+						pd0[way], set, way, n);
+
+				/*
+				 * clear entry @way and not @n.
+				 * This is critical to our optimised loop
+				 */
+				pd0[way] = 0;
+				write_aux_reg(ARC_REG_TLBINDEX,
+						SET_WAY_TO_IDX(mmu, set, way));
+				__tlb_entry_erase();
+			}
+		}
+	}
+
+	local_irq_restore(flags);
+}
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
new file mode 100644
index 000000000..e054780a8
--- /dev/null
+++ b/arch/arc/mm/tlbex.S
@@ -0,0 +1,378 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * TLB Exception Handling for ARC
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Vineetg: April 2011 :
+ *  -MMU v1: moved out legacy code into a seperate file
+ *  -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
+ *      helps avoid a shift when preparing PD0 from PTE
+ *
+ * Vineetg: July 2009
+ *  -For MMU V2, we need not do heuristics at the time of commiting a D-TLB
+ *   entry, so that it doesn't knock out it's I-TLB entry
+ *  -Some more fine tuning:
+ *   bmsk instead of add, asl.cc instead of branch, delay slot utilise etc
+ *
+ * Vineetg: July 2009
+ *  -Practically rewrote the I/D TLB Miss handlers
+ *   Now 40 and 135 instructions a peice as compared to 131 and 449 resp.
+ *   Hence Leaner by 1.5 K
+ *   Used Conditional arithmetic to replace excessive branching
+ *   Also used short instructions wherever possible
+ *
+ * Vineetg: Aug 13th 2008
+ *  -Passing ECR (Exception Cause REG) to do_page_fault( ) for printing
+ *   more information in case of a Fatality
+ *
+ * Vineetg: March 25th Bug #92690
+ *  -Added Debug Code to check if sw-ASID == hw-ASID
+
+ * Rahul Trivedi, Amit Bhor: Codito Technologies 2004
+ */
+
+#include <linux/linkage.h>
+#include <linux/pgtable.h>
+#include <asm/entry.h>
+#include <asm/mmu.h>
+#include <asm/arcregs.h>
+#include <asm/cache.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+;-----------------------------------------------------------------
+; ARC700 Exception Handling doesn't auto-switch stack and it only provides
+; ONE scratch AUX reg "ARC_REG_SCRATCH_DATA0"
+;
+; For Non-SMP, the scratch AUX reg is repurposed to cache task PGD, so a
+; "global" is used to free-up FIRST core reg to be able to code the rest of
+; exception prologue (IRQ auto-disabled on Exceptions, so it's IRQ-safe).
+; Since the Fast Path TLB Miss handler is coded with 4 regs, the remaining 3
+; need to be saved as well by extending the "global" to be 4 words. Hence
+;	".size   ex_saved_reg1, 16"
+; [All of this dance is to avoid stack switching for each TLB Miss, since we
+; only need to save only a handful of regs, as opposed to complete reg file]
+;
+; For ARC700 SMP, the "global" obviously can't be used for free up the FIRST
+; core reg as it will not be SMP safe.
+; Thus scratch AUX reg is used (and no longer used to cache task PGD).
+; To save the rest of 3 regs - per cpu, the global is made "per-cpu".
+; Epilogue thus has to locate the "per-cpu" storage for regs.
+; To avoid cache line bouncing the per-cpu global is aligned/sized per
+; L1_CACHE_SHIFT, despite fundamentally needing to be 12 bytes only. Hence
+;	".size   ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)"
+
+; As simple as that....
+;--------------------------------------------------------------------------
+
+; scratch memory to save [r0-r3] used to code TLB refill Handler
+ARCFP_DATA ex_saved_reg1
+	.align 1 << L1_CACHE_SHIFT
+	.type   ex_saved_reg1, @object
+#ifdef CONFIG_SMP
+	.size   ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)
+ex_saved_reg1:
+	.zero (CONFIG_NR_CPUS << L1_CACHE_SHIFT)
+#else
+	.size   ex_saved_reg1, 16
+ex_saved_reg1:
+	.zero 16
+#endif
+
+.macro TLBMISS_FREEUP_REGS
+#ifdef CONFIG_SMP
+	sr  r0, [ARC_REG_SCRATCH_DATA0]	; freeup r0 to code with
+	GET_CPU_ID  r0			; get to per cpu scratch mem,
+	asl r0, r0, L1_CACHE_SHIFT	; cache line wide per cpu
+	add r0, @ex_saved_reg1, r0
+#else
+	st    r0, [@ex_saved_reg1]
+	mov_s r0, @ex_saved_reg1
+#endif
+	st_s  r1, [r0, 4]
+	st_s  r2, [r0, 8]
+	st_s  r3, [r0, 12]
+.endm
+
+.macro TLBMISS_RESTORE_REGS
+#ifdef CONFIG_SMP
+	GET_CPU_ID  r0			; get to per cpu scratch mem
+	asl r0, r0, L1_CACHE_SHIFT	; each is cache line wide
+	add r0, @ex_saved_reg1, r0
+	ld_s  r3, [r0,12]
+	ld_s  r2, [r0, 8]
+	ld_s  r1, [r0, 4]
+	lr    r0, [ARC_REG_SCRATCH_DATA0]
+#else
+	mov_s r0, @ex_saved_reg1
+	ld_s  r3, [r0,12]
+	ld_s  r2, [r0, 8]
+	ld_s  r1, [r0, 4]
+	ld_s  r0, [r0]
+#endif
+.endm
+
+#else	/* ARCv2 */
+
+.macro TLBMISS_FREEUP_REGS
+#ifdef CONFIG_ARC_HAS_LL64
+	std   r0, [sp, -16]
+	std   r2, [sp, -8]
+#else
+	PUSH  r0
+	PUSH  r1
+	PUSH  r2
+	PUSH  r3
+#endif
+.endm
+
+.macro TLBMISS_RESTORE_REGS
+#ifdef CONFIG_ARC_HAS_LL64
+	ldd   r0, [sp, -16]
+	ldd   r2, [sp, -8]
+#else
+	POP   r3
+	POP   r2
+	POP   r1
+	POP   r0
+#endif
+.endm
+
+#endif
+
+;============================================================================
+;TLB Miss handling Code
+;============================================================================
+
+#ifndef PMD_SHIFT
+#define PMD_SHIFT PUD_SHIFT
+#endif
+
+#ifndef PUD_SHIFT
+#define PUD_SHIFT PGDIR_SHIFT
+#endif
+
+;-----------------------------------------------------------------------------
+; This macro does the page-table lookup for the faulting address.
+; OUT: r0 = PTE faulted on, r1 = ptr to PTE, r2 = Faulting V-address
+.macro LOAD_FAULT_PTE
+
+	lr  r2, [efa]
+
+#ifdef CONFIG_ISA_ARCV2
+	lr  r1, [ARC_REG_SCRATCH_DATA0] ; current pgd
+#else
+	GET_CURR_TASK_ON_CPU  r1
+	ld  r1, [r1, TASK_ACT_MM]
+	ld  r1, [r1, MM_PGD]
+#endif
+
+	lsr     r0, r2, PGDIR_SHIFT     ; Bits for indexing into PGD
+	ld.as   r3, [r1, r0]            ; PGD entry corresp to faulting addr
+	tst	r3, r3
+	bz	do_slow_path_pf         ; if no Page Table, do page fault
+
+#if CONFIG_PGTABLE_LEVELS > 3
+	lsr     r0, r2, PUD_SHIFT	; Bits for indexing into PUD
+	and	r0, r0, (PTRS_PER_PUD - 1)
+	ld.as	r1, [r3, r0]		; PMD entry
+	tst	r1, r1
+	bz	do_slow_path_pf
+	mov	r3, r1
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+	lsr     r0, r2, PMD_SHIFT	; Bits for indexing into PMD
+	and	r0, r0, (PTRS_PER_PMD - 1)
+	ld.as	r1, [r3, r0]		; PMD entry
+	tst	r1, r1
+	bz	do_slow_path_pf
+	mov	r3, r1
+#endif
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	and.f	0, r3, _PAGE_HW_SZ	; Is this Huge PMD (thp)
+	add2.nz	r1, r1, r0
+	bnz.d	2f		; YES: PGD == PMD has THP PTE: stop pgd walk
+	mov.nz	r0, r3
+
+#endif
+	and	r1, r3, PAGE_MASK
+
+	; Get the PTE entry: The idea is
+	; (1) x = addr >> PAGE_SHIFT 	-> masks page-off bits from @fault-addr
+	; (2) y = x & (PTRS_PER_PTE - 1) -> to get index
+	; (3) z = (pgtbl + y * 4)
+
+#ifdef CONFIG_ARC_HAS_PAE40
+#define PTE_SIZE_LOG	3	/* 8 == 2 ^ 3 */
+#else
+#define PTE_SIZE_LOG	2	/* 4 == 2 ^ 2 */
+#endif
+
+	; multiply in step (3) above avoided by shifting lesser in step (1)
+	lsr     r0, r2, ( PAGE_SHIFT - PTE_SIZE_LOG )
+	and     r0, r0, ( (PTRS_PER_PTE - 1) << PTE_SIZE_LOG )
+	ld.aw   r0, [r1, r0]            ; r0: PTE (lower word only for PAE40)
+					; r1: PTE ptr
+
+2:
+
+.endm
+
+;-----------------------------------------------------------------
+; Convert Linux PTE entry into TLB entry
+; A one-word PTE entry is programmed as two-word TLB Entry [PD0:PD1] in mmu
+;    (for PAE40, two-words PTE, while three-word TLB Entry [PD0:PD1:PD1HI])
+; IN: r0 = PTE, r1 = ptr to PTE
+
+.macro CONV_PTE_TO_TLB
+	and    r3, r0, PTE_BITS_RWX	;          r  w  x
+	asl    r2, r3, 3		; Kr Kw Kx 0  0  0 (GLOBAL, kernel only)
+	and.f  0,  r0, _PAGE_GLOBAL
+	or.z   r2, r2, r3		; Kr Kw Kx Ur Uw Ux (!GLOBAL, user page)
+
+	and r3, r0, PTE_BITS_NON_RWX_IN_PD1 ; Extract PFN+cache bits from PTE
+	or  r3, r3, r2
+
+	sr  r3, [ARC_REG_TLBPD1]    	; paddr[31..13] | Kr Kw Kx Ur Uw Ux | C
+#ifdef	CONFIG_ARC_HAS_PAE40
+	ld	r3, [r1, 4]		; paddr[39..32]
+	sr	r3, [ARC_REG_TLBPD1HI]
+#endif
+
+	and r2, r0, PTE_BITS_IN_PD0 ; Extract other PTE flags: (V)alid, (G)lb
+
+	lr  r3,[ARC_REG_TLBPD0]     ; MMU prepares PD0 with vaddr and asid
+
+	or  r3, r3, r2              ; S | vaddr | {sasid|asid}
+	sr  r3,[ARC_REG_TLBPD0]     ; rewrite PD0
+.endm
+
+;-----------------------------------------------------------------
+; Commit the TLB entry into MMU
+
+.macro COMMIT_ENTRY_TO_MMU
+#ifdef CONFIG_ARC_MMU_V3
+
+	/* Get free TLB slot: Set = computed from vaddr, way = random */
+	sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
+
+	/* Commit the Write */
+	sr TLBWriteNI, [ARC_REG_TLBCOMMAND]
+
+#else
+	sr TLBInsertEntry, [ARC_REG_TLBCOMMAND]
+#endif
+
+88:
+.endm
+
+
+ARCFP_CODE	;Fast Path Code, candidate for ICCM
+
+;-----------------------------------------------------------------------------
+; I-TLB Miss Exception Handler
+;-----------------------------------------------------------------------------
+
+ENTRY(EV_TLBMissI)
+
+	TLBMISS_FREEUP_REGS
+
+	;----------------------------------------------------------------
+	; Get the PTE corresponding to V-addr accessed, r2 is setup with EFA
+	LOAD_FAULT_PTE
+
+	;----------------------------------------------------------------
+	; VERIFY_PTE: Check if PTE permissions approp for executing code
+	cmp_s   r2, VMALLOC_START
+	mov_s   r2, (_PAGE_PRESENT | _PAGE_EXECUTE)
+	or.hs   r2, r2, _PAGE_GLOBAL
+
+	and     r3, r0, r2  ; Mask out NON Flag bits from PTE
+	xor.f   r3, r3, r2  ; check ( ( pte & flags_test ) == flags_test )
+	bnz     do_slow_path_pf
+
+	; Let Linux VM know that the page was accessed
+	or      r0, r0, _PAGE_ACCESSED  ; set Accessed Bit
+	st_s    r0, [r1]                ; Write back PTE
+
+	CONV_PTE_TO_TLB
+	COMMIT_ENTRY_TO_MMU
+	TLBMISS_RESTORE_REGS
+EV_TLBMissI_fast_ret:	; additional label for VDK OS-kit instrumentation
+	rtie
+
+END(EV_TLBMissI)
+
+;-----------------------------------------------------------------------------
+; D-TLB Miss Exception Handler
+;-----------------------------------------------------------------------------
+
+ENTRY(EV_TLBMissD)
+
+	TLBMISS_FREEUP_REGS
+
+	;----------------------------------------------------------------
+	; Get the PTE corresponding to V-addr accessed
+	; If PTE exists, it will setup, r0 = PTE, r1 = Ptr to PTE, r2 = EFA
+	LOAD_FAULT_PTE
+
+	;----------------------------------------------------------------
+	; VERIFY_PTE: Chk if PTE permissions approp for data access (R/W/R+W)
+
+	cmp_s	r2, VMALLOC_START
+	mov_s   r2, _PAGE_PRESENT	; common bit for K/U PTE
+	or.hs	r2, r2, _PAGE_GLOBAL	; kernel PTE only
+
+	; Linux PTE [RWX] bits are semantically overloaded:
+	; -If PAGE_GLOBAL set, they refer to kernel-only flags (vmalloc)
+	; -Otherwise they are user-mode permissions, and those are exactly
+	;  same for kernel mode as well (e.g. copy_(to|from)_user)
+
+	lr      r3, [ecr]
+	btst_s  r3, ECR_C_BIT_DTLB_LD_MISS	; Read Access
+	or.nz   r2, r2, _PAGE_READ      	; chk for Read flag in PTE
+	btst_s  r3, ECR_C_BIT_DTLB_ST_MISS	; Write Access
+	or.nz   r2, r2, _PAGE_WRITE     	; chk for Write flag in PTE
+	; Above laddering takes care of XCHG access (both R and W)
+
+	; By now, r2 setup with all the Flags we need to check in PTE
+	and     r3, r0, r2              ; Mask out NON Flag bits from PTE
+	brne.d  r3, r2, do_slow_path_pf ; is ((pte & flags_test) == flags_test)
+
+	;----------------------------------------------------------------
+	; UPDATE_PTE: Let Linux VM know that page was accessed/dirty
+	or      r0, r0, _PAGE_ACCESSED        ; Accessed bit always
+	or.nz   r0, r0, _PAGE_DIRTY           ; if Write, set Dirty bit as well
+	st_s    r0, [r1]                      ; Write back PTE
+
+	CONV_PTE_TO_TLB
+
+	COMMIT_ENTRY_TO_MMU
+	TLBMISS_RESTORE_REGS
+EV_TLBMissD_fast_ret:	; additional label for VDK OS-kit instrumentation
+	rtie
+
+;-------- Common routine to call Linux Page Fault Handler -----------
+do_slow_path_pf:
+
+#ifdef CONFIG_ISA_ARCV2
+	; Set Z flag if exception in U mode. Hardware micro-ops do this on any
+	; taken interrupt/exception, and thus is already the case at the entry
+	; above, but ensuing code would have already clobbered.
+	; EXCEPTION_PROLOGUE called in slow path, relies on correct Z flag set
+
+	lr	r2, [erstatus]
+	and	r2, r2, STATUS_U_MASK
+	bxor.f	0, r2, STATUS_U_BIT
+#endif
+
+	; Restore the 4-scratch regs saved by fast path miss handler
+	TLBMISS_RESTORE_REGS
+
+	; Slow path TLB Miss handled as a regular ARC Exception
+	; (stack switching / save the complete reg-file).
+	b  call_do_page_fault
+END(EV_TLBMissD)
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
new file mode 100644
index 000000000..b9652c69d
--- /dev/null
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+#
+
+menuconfig ARC_PLAT_AXS10X
+	bool "Synopsys ARC AXS10x Software Development Platforms"
+	select DW_APB_ICTL
+	select GPIO_DWAPB
+	select OF_GPIO
+	select HAVE_PCI
+	select GENERIC_IRQ_CHIP
+	select GPIOLIB
+	select AXS101 if ISA_ARCOMPACT
+	select AXS103 if ISA_ARCV2
+	help
+	  Support for the ARC AXS10x Software Development Platforms.
+
+	  The AXS10x Platforms consist of a mainboard with peripherals,
+	  on which several daughter cards can be placed. The daughter cards
+	  typically contain a CPU and memory.
+
+if ARC_PLAT_AXS10X
+
+config AXS101
+	depends on ISA_ARCOMPACT
+	bool "AXS101 with AXC001 CPU Card (ARC 770D/EM6/AS221)"
+	help
+	  This adds support for the 770D/EM6/AS221 CPU Card. Only the ARC
+	  770D is supported in Linux.
+
+	  The AXS101 Platform consists of an AXS10x mainboard with
+	  this daughtercard. Please use the axs101.dts device tree
+	  with this configuration.
+
+config AXS103
+	bool "AXS103 with AXC003 CPU Card (ARC HS38x)"
+	depends on ISA_ARCV2
+	help
+	  This adds support for the HS38x CPU Card.
+
+	  The AXS103 Platform consists of an AXS10x mainboard with
+	  this daughtercard. Please use the axs103.dts device tree
+	  with this configuration.
+
+endif
diff --git a/arch/arc/plat-axs10x/Makefile b/arch/arc/plat-axs10x/Makefile
new file mode 100644
index 000000000..cebe5716e
--- /dev/null
+++ b/arch/arc/plat-axs10x/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+#
+
+obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x.o
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
new file mode 100644
index 000000000..b821df7b0
--- /dev/null
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AXS101/AXS103 Software Development Platform
+ *
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/libfdt.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/io.h>
+#include <asm/mach_desc.h>
+#include <soc/arc/mcip.h>
+
+#define AXS_MB_CGU		0xE0010000
+#define AXS_MB_CREG		0xE0011000
+
+#define CREG_MB_IRQ_MUX		(AXS_MB_CREG + 0x214)
+#define CREG_MB_SW_RESET	(AXS_MB_CREG + 0x220)
+#define CREG_MB_VER		(AXS_MB_CREG + 0x230)
+#define CREG_MB_CONFIG		(AXS_MB_CREG + 0x234)
+
+#define AXC001_CREG		0xF0001000
+#define AXC001_GPIO_INTC	0xF0003000
+
+static void __init axs10x_enable_gpio_intc_wire(void)
+{
+	/*
+	 * Peripherals on CPU Card and Mother Board are wired to cpu intc via
+	 * intermediate DW APB GPIO blocks (mainly for debouncing)
+	 *
+	 *         ---------------------
+	 *        |  snps,arc700-intc |
+	 *        ---------------------
+	 *          | #7          | #15
+	 * -------------------   -------------------
+	 * | snps,dw-apb-gpio |  | snps,dw-apb-gpio |
+	 * -------------------   -------------------
+	 *        | #12                     |
+	 *        |                 [ Debug UART on cpu card ]
+	 *        |
+	 * ------------------------
+	 * | snps,dw-apb-intc (MB)|
+	 * ------------------------
+	 *  |      |       |      |
+	 * [eth] [uart]        [... other perip on Main Board]
+	 *
+	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
+	 * with stacked INTCs. In particular problem happens if its master INTC
+	 * not yet instantiated. See discussion here -
+	 * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com
+	 *
+	 * So setup the first gpio block as a passive pass thru and hide it from
+	 * DT hardware topology - connect MB intc directly to cpu intc
+	 * The GPIO "wire" needs to be init nevertheless (here)
+	 *
+	 * One side adv is that peripheral interrupt handling avoids one nested
+	 * intc ISR hop
+	 */
+#define GPIO_INTEN		(AXC001_GPIO_INTC + 0x30)
+#define GPIO_INTMASK		(AXC001_GPIO_INTC + 0x34)
+#define GPIO_INTTYPE_LEVEL	(AXC001_GPIO_INTC + 0x38)
+#define GPIO_INT_POLARITY	(AXC001_GPIO_INTC + 0x3c)
+#define MB_TO_GPIO_IRQ		12
+
+	iowrite32(~(1 << MB_TO_GPIO_IRQ), (void __iomem *) GPIO_INTMASK);
+	iowrite32(0, (void __iomem *) GPIO_INTTYPE_LEVEL);
+	iowrite32(~0, (void __iomem *) GPIO_INT_POLARITY);
+	iowrite32(1 << MB_TO_GPIO_IRQ, (void __iomem *) GPIO_INTEN);
+}
+
+static void __init axs10x_print_board_ver(unsigned int creg, const char *str)
+{
+	union ver {
+		struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+			unsigned int pad:11, y:12, m:4, d:5;
+#else
+			unsigned int d:5, m:4, y:12, pad:11;
+#endif
+		};
+		unsigned int val;
+	} board;
+
+	board.val = ioread32((void __iomem *)creg);
+	pr_info("AXS: %s FPGA Date: %u-%u-%u\n", str, board.d, board.m,
+		board.y);
+}
+
+static void __init axs10x_early_init(void)
+{
+	int mb_rev;
+	char mb[32];
+
+	/* Determine motherboard version */
+	if (ioread32((void __iomem *) CREG_MB_CONFIG) & (1 << 28))
+		mb_rev = 3;	/* HT-3 (rev3.0) */
+	else
+		mb_rev = 2;	/* HT-2 (rev2.0) */
+
+	axs10x_enable_gpio_intc_wire();
+
+	scnprintf(mb, 32, "MainBoard v%d", mb_rev);
+	axs10x_print_board_ver(CREG_MB_VER, mb);
+}
+
+#ifdef CONFIG_AXS101
+
+#define CREG_CPU_ADDR_770	(AXC001_CREG + 0x20)
+#define CREG_CPU_ADDR_TUNN	(AXC001_CREG + 0x60)
+#define CREG_CPU_ADDR_770_UPD	(AXC001_CREG + 0x34)
+#define CREG_CPU_ADDR_TUNN_UPD	(AXC001_CREG + 0x74)
+
+#define CREG_CPU_ARC770_IRQ_MUX	(AXC001_CREG + 0x114)
+#define CREG_CPU_GPIO_UART_MUX	(AXC001_CREG + 0x120)
+
+/*
+ * Set up System Memory Map for ARC cpu / peripherals controllers
+ *
+ * Each AXI master has a 4GB memory map specified as 16 apertures of 256MB, each
+ * of which maps to a corresponding 256MB aperture in Target slave memory map.
+ *
+ * e.g. ARC cpu AXI Master's aperture 8 (0x8000_0000) is mapped to aperture 0
+ * (0x0000_0000) of DDR Port 0 (slave #1)
+ *
+ * Access from cpu to MB controllers such as GMAC is setup using AXI Tunnel:
+ * which has master/slaves on both ends.
+ * e.g. aperture 14 (0xE000_0000) of ARC cpu is mapped to aperture 14
+ * (0xE000_0000) of CPU Card AXI Tunnel slave (slave #3) which is mapped to
+ * MB AXI Tunnel Master, which also has a mem map setup
+ *
+ * In the reverse direction, MB AXI Masters (e.g. GMAC) mem map is setup
+ * to map to MB AXI Tunnel slave which connects to CPU Card AXI Tunnel Master
+ */
+struct aperture {
+	unsigned int slave_sel:4, slave_off:4, pad:24;
+};
+
+/* CPU Card target slaves */
+#define AXC001_SLV_NONE			0
+#define AXC001_SLV_DDR_PORT0		1
+#define AXC001_SLV_SRAM			2
+#define AXC001_SLV_AXI_TUNNEL		3
+#define AXC001_SLV_AXI2APB		6
+#define AXC001_SLV_DDR_PORT1		7
+
+/* MB AXI Target slaves */
+#define AXS_MB_SLV_NONE			0
+#define AXS_MB_SLV_AXI_TUNNEL_CPU	1
+#define AXS_MB_SLV_AXI_TUNNEL_HAPS	2
+#define AXS_MB_SLV_SRAM			3
+#define AXS_MB_SLV_CONTROL		4
+
+/* MB AXI masters */
+#define AXS_MB_MST_TUNNEL_CPU		0
+#define AXS_MB_MST_USB_OHCI		10
+
+/*
+ * memmap for ARC core on CPU Card
+ */
+static const struct aperture axc001_memmap[16] = {
+	{AXC001_SLV_AXI_TUNNEL,		0x0},
+	{AXC001_SLV_AXI_TUNNEL,		0x1},
+	{AXC001_SLV_SRAM,		0x0}, /* 0x2000_0000: Local SRAM */
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_DDR_PORT0,		0x0}, /* 0x8000_0000: DDR   0..256M */
+	{AXC001_SLV_DDR_PORT0,		0x1}, /* 0x9000_0000: DDR 256..512M */
+	{AXC001_SLV_DDR_PORT0,		0x2},
+	{AXC001_SLV_DDR_PORT0,		0x3},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_AXI_TUNNEL,		0xD},
+	{AXC001_SLV_AXI_TUNNEL,		0xE}, /* MB: CREG, CGU... */
+	{AXC001_SLV_AXI2APB,		0x0}, /* CPU Card local CREG, CGU... */
+};
+
+/*
+ * memmap for CPU Card AXI Tunnel Master (for access by MB controllers)
+ * GMAC (MB) -> MB AXI Tunnel slave -> CPU Card AXI Tunnel Master -> DDR
+ */
+static const struct aperture axc001_axi_tunnel_memmap[16] = {
+	{AXC001_SLV_AXI_TUNNEL,		0x0},
+	{AXC001_SLV_AXI_TUNNEL,		0x1},
+	{AXC001_SLV_SRAM,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_DDR_PORT1,		0x0},
+	{AXC001_SLV_DDR_PORT1,		0x1},
+	{AXC001_SLV_DDR_PORT1,		0x2},
+	{AXC001_SLV_DDR_PORT1,		0x3},
+	{AXC001_SLV_NONE,		0x0},
+	{AXC001_SLV_AXI_TUNNEL,		0xD},
+	{AXC001_SLV_AXI_TUNNEL,		0xE},
+	{AXC001_SLV_AXI2APB,		0x0},
+};
+
+/*
+ * memmap for MB AXI Masters
+ * Same mem map for all perip controllers as well as MB AXI Tunnel Master
+ */
+static const struct aperture axs_mb_memmap[16] = {
+	{AXS_MB_SLV_SRAM,		0x0},
+	{AXS_MB_SLV_SRAM,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0x8},	/* DDR on CPU Card */
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0x9},	/* DDR on CPU Card */
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0xA},
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0xB},
+	{AXS_MB_SLV_NONE,		0x0},
+	{AXS_MB_SLV_AXI_TUNNEL_HAPS,	0xD},
+	{AXS_MB_SLV_CONTROL,		0x0},	/* MB Local CREG, CGU... */
+	{AXS_MB_SLV_AXI_TUNNEL_CPU,	0xF},
+};
+
+static noinline void __init
+axs101_set_memmap(void __iomem *base, const struct aperture map[16])
+{
+	unsigned int slave_select, slave_offset;
+	int i;
+
+	slave_select = slave_offset = 0;
+	for (i = 0; i < 8; i++) {
+		slave_select |= map[i].slave_sel << (i << 2);
+		slave_offset |= map[i].slave_off << (i << 2);
+	}
+
+	iowrite32(slave_select, base + 0x0);	/* SLV0 */
+	iowrite32(slave_offset, base + 0x8);	/* OFFSET0 */
+
+	slave_select = slave_offset = 0;
+	for (i = 0; i < 8; i++) {
+		slave_select |= map[i+8].slave_sel << (i << 2);
+		slave_offset |= map[i+8].slave_off << (i << 2);
+	}
+
+	iowrite32(slave_select, base + 0x4);	/* SLV1 */
+	iowrite32(slave_offset, base + 0xC);	/* OFFSET1 */
+}
+
+static void __init axs101_early_init(void)
+{
+	int i;
+
+	/* ARC 770D memory view */
+	axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_770, axc001_memmap);
+	iowrite32(1, (void __iomem *) CREG_CPU_ADDR_770_UPD);
+
+	/* AXI tunnel memory map (incoming traffic from MB into CPU Card */
+	axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_TUNN,
+			      axc001_axi_tunnel_memmap);
+	iowrite32(1, (void __iomem *) CREG_CPU_ADDR_TUNN_UPD);
+
+	/* MB peripherals memory map */
+	for (i = AXS_MB_MST_TUNNEL_CPU; i <= AXS_MB_MST_USB_OHCI; i++)
+		axs101_set_memmap((void __iomem *) AXS_MB_CREG + (i << 4),
+				      axs_mb_memmap);
+
+	iowrite32(0x3ff, (void __iomem *) AXS_MB_CREG + 0x100); /* Update */
+
+	/* GPIO pins 18 and 19 are used as UART rx and tx, respectively. */
+	iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX);
+
+	/* Set up the MB interrupt system: mux interrupts to GPIO7) */
+	iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX);
+
+	/* reset ethernet and ULPI interfaces */
+	iowrite32(0x18, (void __iomem *) CREG_MB_SW_RESET);
+
+	/* map GPIO 14:10 to ARC 9:5 (IRQ mux change for MB v2 onwards) */
+	iowrite32(0x52, (void __iomem *) CREG_CPU_ARC770_IRQ_MUX);
+
+	axs10x_early_init();
+}
+
+#endif	/* CONFIG_AXS101 */
+
+#ifdef CONFIG_AXS103
+
+#define AXC003_CREG	0xF0001000
+#define AXC003_MST_AXI_TUNNEL	0
+#define AXC003_MST_HS38		1
+
+#define CREG_CPU_AXI_M0_IRQ_MUX	(AXC003_CREG + 0x440)
+#define CREG_CPU_GPIO_UART_MUX	(AXC003_CREG + 0x480)
+#define CREG_CPU_TUN_IO_CTRL	(AXC003_CREG + 0x494)
+
+
+static void __init axs103_early_init(void)
+{
+#ifdef CONFIG_ARC_MCIP
+	/*
+	 * AXS103 configurations for SMP/QUAD configurations share device tree
+	 * which defaults to 100 MHz. However recent failures of Quad config
+	 * revealed P&R timing violations so clamp it down to safe 50 MHz
+	 * Instead of duplicating defconfig/DT for SMP/QUAD, add a small hack
+	 * of fudging the freq in DT
+	 */
+#define AXS103_QUAD_CORE_CPU_FREQ_HZ	50000000
+
+	unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
+	if (num_cores > 2) {
+		u32 freq;
+		int off = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk");
+		const struct fdt_property *prop;
+
+		prop = fdt_get_property(initial_boot_params, off,
+					"assigned-clock-rates", NULL);
+		freq = be32_to_cpu(*(u32 *)(prop->data));
+
+		/* Patching .dtb in-place with new core clock value */
+		if (freq != AXS103_QUAD_CORE_CPU_FREQ_HZ) {
+			freq = cpu_to_be32(AXS103_QUAD_CORE_CPU_FREQ_HZ);
+			fdt_setprop_inplace(initial_boot_params, off,
+					    "assigned-clock-rates", &freq, sizeof(freq));
+		}
+	}
+#endif
+
+	/* Memory maps already config in pre-bootloader */
+
+	/* set GPIO mux to UART */
+	iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX);
+
+	iowrite32((0x00100000U | 0x000C0000U | 0x00003322U),
+		  (void __iomem *) CREG_CPU_TUN_IO_CTRL);
+
+	/* Set up the AXS_MB interrupt system.*/
+	iowrite32(12, (void __iomem *) (CREG_CPU_AXI_M0_IRQ_MUX
+					 + (AXC003_MST_HS38 << 2)));
+
+	/* connect ICTL - Main Board with GPIO line */
+	iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX);
+
+	axs10x_print_board_ver(AXC003_CREG + 4088, "AXC003 CPU Card");
+
+	axs10x_early_init();
+}
+#endif
+
+#ifdef CONFIG_AXS101
+
+static const char *axs101_compat[] __initconst = {
+	"snps,axs101",
+	NULL,
+};
+
+MACHINE_START(AXS101, "axs101")
+	.dt_compat	= axs101_compat,
+	.init_early	= axs101_early_init,
+MACHINE_END
+
+#endif	/* CONFIG_AXS101 */
+
+#ifdef CONFIG_AXS103
+
+static const char *axs103_compat[] __initconst = {
+	"snps,axs103",
+	NULL,
+};
+
+MACHINE_START(AXS103, "axs103")
+	.dt_compat	= axs103_compat,
+	.init_early	= axs103_early_init,
+MACHINE_END
+
+/*
+ * For the VDK OS-kit, to get the offset to pid and command fields
+ */
+char coware_swa_pid_offset[TASK_PID];
+char coware_swa_comm_offset[TASK_COMM];
+
+#endif	/* CONFIG_AXS103 */
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
new file mode 100644
index 000000000..a2d10c29f
--- /dev/null
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+#
+
+menuconfig ARC_SOC_HSDK
+	bool "ARC HS Development Kit SOC"
+	depends on ISA_ARCV2
+	select ARC_HAS_ACCL_REGS
+	select ARC_IRQ_NO_AUTOSAVE
+	select ARC_FPU_SAVE_RESTORE
+	select CLK_HSDK
+	select RESET_CONTROLLER
+	select RESET_HSDK
+	select HAVE_PCI
diff --git a/arch/arc/plat-hsdk/Makefile b/arch/arc/plat-hsdk/Makefile
new file mode 100644
index 000000000..bb2921e82
--- /dev/null
+++ b/arch/arc/plat-hsdk/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+#
+
+obj-y := platform.o
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
new file mode 100644
index 000000000..c4a875b22
--- /dev/null
+++ b/arch/arc/plat-hsdk/platform.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARC HSDK Platform support code
+ *
+ * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/init.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
+#include <linux/smp.h>
+#include <asm/arcregs.h>
+#include <asm/io.h>
+#include <asm/mach_desc.h>
+
+int arc_hsdk_axi_dmac_coherent __section(".data") = 0;
+
+#define ARC_CCM_UNUSED_ADDR	0x60000000
+
+
+#define ARC_PERIPHERAL_BASE	0xf0000000
+#define CREG_BASE		(ARC_PERIPHERAL_BASE + 0x1000)
+
+#define SDIO_BASE		(ARC_PERIPHERAL_BASE + 0xA000)
+#define SDIO_UHS_REG_EXT	(SDIO_BASE + 0x108)
+#define SDIO_UHS_REG_EXT_DIV_2	(2 << 30)
+
+#define HSDK_GPIO_INTC          (ARC_PERIPHERAL_BASE + 0x3000)
+
+static void __init hsdk_enable_gpio_intc_wire(void)
+{
+	/*
+	 * Peripherals on CPU Card are wired to cpu intc via intermediate
+	 * DW APB GPIO blocks (mainly for debouncing)
+	 *
+	 *         ---------------------
+	 *        |  snps,archs-intc  |
+	 *        ---------------------
+	 *                  |
+	 *        ----------------------
+	 *        | snps,archs-idu-intc |
+	 *        ----------------------
+	 *         |   |     |   |    |
+	 *         | [eth] [USB]    [... other peripherals]
+	 *         |
+	 * -------------------
+	 * | snps,dw-apb-intc |
+	 * -------------------
+	 *  |      |   |   |
+	 * [Bt] [HAPS]   [... other peripherals]
+	 *
+	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
+	 * with stacked INTCs. In particular problem happens if its master INTC
+	 * not yet instantiated. See discussion here -
+	 * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com
+	 *
+	 * So setup the first gpio block as a passive pass thru and hide it from
+	 * DT hardware topology - connect intc directly to cpu intc
+	 * The GPIO "wire" needs to be init nevertheless (here)
+	 *
+	 * One side adv is that peripheral interrupt handling avoids one nested
+	 * intc ISR hop
+	 *
+	 * According to HSDK User's Manual [1], "Table 2 Interrupt Mapping"
+	 * we have the following GPIO input lines used as sources of interrupt:
+	 * - GPIO[0] - Bluetooth interrupt of RS9113 module
+	 * - GPIO[2] - HAPS interrupt (on HapsTrak 3 connector)
+	 * - GPIO[3] - Audio codec (MAX9880A) interrupt
+	 * - GPIO[8-23] - Available on Arduino and PMOD_x headers
+	 * For now there's no use of Arduino and PMOD_x headers in Linux
+	 * use-case so we only enable lines 0, 2 and 3.
+	 *
+	 * [1] https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf
+	 */
+#define GPIO_INTEN              (HSDK_GPIO_INTC + 0x30)
+#define GPIO_INTMASK            (HSDK_GPIO_INTC + 0x34)
+#define GPIO_INTTYPE_LEVEL      (HSDK_GPIO_INTC + 0x38)
+#define GPIO_INT_POLARITY       (HSDK_GPIO_INTC + 0x3c)
+#define GPIO_INT_CONNECTED_MASK	0x0d
+
+	iowrite32(0xffffffff, (void __iomem *) GPIO_INTMASK);
+	iowrite32(~GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTMASK);
+	iowrite32(0x00000000, (void __iomem *) GPIO_INTTYPE_LEVEL);
+	iowrite32(0xffffffff, (void __iomem *) GPIO_INT_POLARITY);
+	iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN);
+}
+
+static int __init hsdk_tweak_node_coherency(const char *path, bool coherent)
+{
+	void *fdt = initial_boot_params;
+	const void *prop;
+	int node, ret;
+	bool dt_coh_set;
+
+	node = fdt_path_offset(fdt, path);
+	if (node < 0)
+		goto tweak_fail;
+
+	prop = fdt_getprop(fdt, node, "dma-coherent", &ret);
+	if (!prop && ret != -FDT_ERR_NOTFOUND)
+		goto tweak_fail;
+
+	dt_coh_set = ret != -FDT_ERR_NOTFOUND;
+	ret = 0;
+
+	/* need to remove "dma-coherent" property */
+	if (dt_coh_set && !coherent)
+		ret = fdt_delprop(fdt, node, "dma-coherent");
+
+	/* need to set "dma-coherent" property */
+	if (!dt_coh_set && coherent)
+		ret = fdt_setprop(fdt, node, "dma-coherent", NULL, 0);
+
+	if (ret < 0)
+		goto tweak_fail;
+
+	return 0;
+
+tweak_fail:
+	pr_err("failed to tweak %s to %scoherent\n", path, coherent ? "" : "non");
+	return -EFAULT;
+}
+
+enum hsdk_axi_masters {
+	M_HS_CORE = 0,
+	M_HS_RTT,
+	M_AXI_TUN,
+	M_HDMI_VIDEO,
+	M_HDMI_AUDIO,
+	M_USB_HOST,
+	M_ETHERNET,
+	M_SDIO,
+	M_GPU,
+	M_DMAC_0,
+	M_DMAC_1,
+	M_DVFS
+};
+
+#define UPDATE_VAL	1
+
+/*
+ * This is modified configuration of AXI bridge. Default settings
+ * are specified in "Table 111 CREG Address Decoder register reset values".
+ *
+ * AXI_M_m_SLV{0|1} - Slave Select register for master 'm'.
+ * Possible slaves are:
+ *  - 0  => no slave selected
+ *  - 1  => DDR controller port #1
+ *  - 2  => SRAM controller
+ *  - 3  => AXI tunnel
+ *  - 4  => EBI controller
+ *  - 5  => ROM controller
+ *  - 6  => AXI2APB bridge
+ *  - 7  => DDR controller port #2
+ *  - 8  => DDR controller port #3
+ *  - 9  => HS38x4 IOC
+ *  - 10 => HS38x4 DMI
+ * AXI_M_m_OFFSET{0|1} - Addr Offset register for master 'm'
+ *
+ * Please read ARC HS Development IC Specification, section 17.2 for more
+ * information about apertures configuration.
+ *
+ * m	master		AXI_M_m_SLV0	AXI_M_m_SLV1	AXI_M_m_OFFSET0	AXI_M_m_OFFSET1
+ * 0	HS (CBU)	0x11111111	0x63111111	0xFEDCBA98	0x0E543210
+ * 1	HS (RTT)	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 2	AXI Tunnel	0x88888888	0x88888888	0xFEDCBA98	0x76543210
+ * 3	HDMI-VIDEO	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 4	HDMI-ADUIO	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 5	USB-HOST	0x77777777	0x77999999	0xFEDCBA98	0x76DCBA98
+ * 6	ETHERNET	0x77777777	0x77999999	0xFEDCBA98	0x76DCBA98
+ * 7	SDIO		0x77777777	0x77999999	0xFEDCBA98	0x76DCBA98
+ * 8	GPU		0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 9	DMAC (port #1)	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 10	DMAC (port #2)	0x77777777	0x77777777	0xFEDCBA98	0x76543210
+ * 11	DVFS		0x00000000	0x60000000	0x00000000	0x00000000
+ */
+
+#define CREG_AXI_M_SLV0(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m)))
+#define CREG_AXI_M_SLV1(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x04))
+#define CREG_AXI_M_OFT0(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x08))
+#define CREG_AXI_M_OFT1(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x0C))
+#define CREG_AXI_M_UPDT(m)  ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x14))
+
+#define CREG_AXI_M_HS_CORE_BOOT	((void __iomem *)(CREG_BASE + 0x010))
+
+#define CREG_PAE		((void __iomem *)(CREG_BASE + 0x180))
+#define CREG_PAE_UPDT		((void __iomem *)(CREG_BASE + 0x194))
+
+static void __init hsdk_init_memory_bridge_axi_dmac(void)
+{
+	bool coherent = !!arc_hsdk_axi_dmac_coherent;
+	u32 axi_m_slv1, axi_m_oft1;
+
+	/*
+	 * Don't tweak memory bridge configuration if we failed to tweak DTB
+	 * as we will end up in a inconsistent state.
+	 */
+	if (hsdk_tweak_node_coherency("/soc/dmac@80000", coherent))
+		return;
+
+	if (coherent) {
+		axi_m_slv1 = 0x77999999;
+		axi_m_oft1 = 0x76DCBA98;
+	} else {
+		axi_m_slv1 = 0x77777777;
+		axi_m_oft1 = 0x76543210;
+	}
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_0));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_0));
+	writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_0));
+	writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_0));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_0));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_1));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_1));
+	writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_1));
+	writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_1));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_1));
+}
+
+static void __init hsdk_init_memory_bridge(void)
+{
+	u32 reg;
+
+	/*
+	 * M_HS_CORE has one unique register - BOOT.
+	 * We need to clean boot mirror (BOOT[1:0]) bits in them to avoid first
+	 * aperture to be masked by 'boot mirror'.
+	 */
+	reg = readl(CREG_AXI_M_HS_CORE_BOOT) & (~0x3);
+	writel(reg, CREG_AXI_M_HS_CORE_BOOT);
+	writel(0x11111111, CREG_AXI_M_SLV0(M_HS_CORE));
+	writel(0x63111111, CREG_AXI_M_SLV1(M_HS_CORE));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_CORE));
+	writel(0x0E543210, CREG_AXI_M_OFT1(M_HS_CORE));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_CORE));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_HS_RTT));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_HS_RTT));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_RTT));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_HS_RTT));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_RTT));
+
+	writel(0x88888888, CREG_AXI_M_SLV0(M_AXI_TUN));
+	writel(0x88888888, CREG_AXI_M_SLV1(M_AXI_TUN));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_AXI_TUN));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_AXI_TUN));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_AXI_TUN));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_VIDEO));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_VIDEO));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_VIDEO));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_VIDEO));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_VIDEO));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_AUDIO));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_AUDIO));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_AUDIO));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_AUDIO));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_AUDIO));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_USB_HOST));
+	writel(0x77999999, CREG_AXI_M_SLV1(M_USB_HOST));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_USB_HOST));
+	writel(0x76DCBA98, CREG_AXI_M_OFT1(M_USB_HOST));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_USB_HOST));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_ETHERNET));
+	writel(0x77999999, CREG_AXI_M_SLV1(M_ETHERNET));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_ETHERNET));
+	writel(0x76DCBA98, CREG_AXI_M_OFT1(M_ETHERNET));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_ETHERNET));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_SDIO));
+	writel(0x77999999, CREG_AXI_M_SLV1(M_SDIO));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_SDIO));
+	writel(0x76DCBA98, CREG_AXI_M_OFT1(M_SDIO));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_SDIO));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_GPU));
+	writel(0x77777777, CREG_AXI_M_SLV1(M_GPU));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_GPU));
+	writel(0x76543210, CREG_AXI_M_OFT1(M_GPU));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_GPU));
+
+	writel(0x00000000, CREG_AXI_M_SLV0(M_DVFS));
+	writel(0x60000000, CREG_AXI_M_SLV1(M_DVFS));
+	writel(0x00000000, CREG_AXI_M_OFT0(M_DVFS));
+	writel(0x00000000, CREG_AXI_M_OFT1(M_DVFS));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DVFS));
+
+	hsdk_init_memory_bridge_axi_dmac();
+
+	/*
+	 * PAE remapping for DMA clients does not work due to an RTL bug, so
+	 * CREG_PAE register must be programmed to all zeroes, otherwise it
+	 * will cause problems with DMA to/from peripherals even if PAE40 is
+	 * not used.
+	 */
+	writel(0x00000000, CREG_PAE);
+	writel(UPDATE_VAL, CREG_PAE_UPDT);
+}
+
+static void __init hsdk_init_early(void)
+{
+	hsdk_init_memory_bridge();
+
+	/*
+	 * Switch SDIO external ciu clock divider from default div-by-8 to
+	 * minimum possible div-by-2.
+	 */
+	iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
+
+	hsdk_enable_gpio_intc_wire();
+}
+
+static const char *hsdk_compat[] __initconst = {
+	"snps,hsdk",
+	NULL,
+};
+
+MACHINE_START(SIMULATION, "hsdk")
+	.dt_compat	= hsdk_compat,
+	.init_early     = hsdk_init_early,
+MACHINE_END
diff --git a/arch/arc/plat-sim/Makefile b/arch/arc/plat-sim/Makefile
new file mode 100644
index 000000000..ea9389bf8
--- /dev/null
+++ b/arch/arc/plat-sim/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com)
+#
+
+obj-y := platform.o
diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c
new file mode 100644
index 000000000..2bde2a6e3
--- /dev/null
+++ b/arch/arc/plat-sim/platform.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARC simulation Platform support code
+ *
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#include <linux/init.h>
+#include <asm/mach_desc.h>
+
+/*----------------------- Machine Descriptions ------------------------------
+ *
+ * Machine description is simply a set of platform/board specific callbacks
+ * This is not directly related to DeviceTree based dynamic device creation,
+ * however as part of early device tree scan, we also select the right
+ * callback set, by matching the DT compatible name.
+ */
+
+static const char *simulation_compat[] __initconst = {
+#ifdef CONFIG_ISA_ARCOMPACT
+	"snps,nsim",
+	"snps,nsimosci",
+#else
+	"snps,nsimosci_hs",
+	"snps,zebu_hs",
+#endif
+	NULL,
+};
+
+MACHINE_START(SIMULATION, "simulation")
+	.dt_compat	= simulation_compat,
+MACHINE_END
diff --git a/arch/arc/plat-tb10x/Kconfig b/arch/arc/plat-tb10x/Kconfig
new file mode 100644
index 000000000..158d53aad
--- /dev/null
+++ b/arch/arc/plat-tb10x/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Abilis Systems TB10x platform kernel configuration file
+#
+# Author: Christian Ruppert <christian.ruppert@abilis.com>
+#
+
+
+menuconfig ARC_PLAT_TB10X
+	bool "Abilis TB10x"
+	select PINCTRL
+	select PINCTRL_TB10X
+	select PINMUX
+	select GPIOLIB
+	select GPIO_TB10X
+	select TB10X_IRQC
+	help
+	  Support for platforms based on the TB10x home media gateway SOC by
+	  Abilis Systems. TB10x is based on the ARC700 CPU architecture.
+	  Say Y if you are building a kernel for one of the SOCs in this
+	  series (e.g. TB100 or TB101). If in doubt say N.
diff --git a/arch/arc/plat-tb10x/Makefile b/arch/arc/plat-tb10x/Makefile
new file mode 100644
index 000000000..8e97d454e
--- /dev/null
+++ b/arch/arc/plat-tb10x/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Abilis Systems TB10x platform Makefile
+#
+# Author: Christian Ruppert <christian.ruppert@abilis.com>
+#
+
+
+KBUILD_CFLAGS   += -Iarch/arc/plat-tb10x/include
+
+obj-y += tb10x.o
diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c
new file mode 100644
index 000000000..11d23420f
--- /dev/null
+++ b/arch/arc/plat-tb10x/tb10x.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB10x platform initialisation
+ *
+ * Copyright (C) Abilis Systems 2012
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+#include <linux/init.h>
+#include <asm/mach_desc.h>
+
+static const char *tb10x_compat[] __initdata = {
+	"abilis,arc-tb10x",
+	NULL,
+};
+
+MACHINE_START(TB10x, "tb10x")
+	.dt_compat	= tb10x_compat,
+MACHINE_END