Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 209 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
new file mode 100644
index 000000000..946f0f453
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for OpenBlocks A7 board
+ *
+ * Copyright (C) 2013 Free Electrons
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA7";
+	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+
+			s24c02: s24c02@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header
+				     &pmx_gpio_header_gpo>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Accessible on connector J202. The MPP
+			 * listed below are pin 1-7, pin 8 is unused,
+			 * pin 9 is external reset input and pin 10 is
+			 * ground.
+			 */
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp17", "mpp29", "mpp28",
+					       "mpp35", "mpp34", "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_header_gpo: pxm-gpio-header-gpo {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa7:red:stat";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-green {
+			label = "obsa7:green:stat";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-yellow {
+			label = "obsa7:yellow:stat";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button {
+			label = "Init Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x1c0000>;
+	};
+
+	partition@1c0000 {
+		label = "env";
+		reg = <0x1c0000 0x2c0000>;
+	};
+
+	partition@480000 {
+		label = "test";
+		reg = <0x480000 0x160000>;
+	};
+
+	partition@5e0000 {
+		label = "conf";
+		reg = <0x5e0000 0x540000>;
+	};
+
+	partition@b20000 {
+		label = "linux";
+		reg = <0xb20000 0x3d40000>;
+	};
+
+	partition@4860000 {
+		label = "user";
+		reg = <0x4860000 0xb7a0000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};