Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 540 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
new file mode 100644
index 000000000..723787f72
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp13-clks.h>
+#include <dt-bindings/reset/stm32mp13-resets.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	firmware {
+		optee {
+			method = "smc";
+			compatible = "linaro,optee-tz";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	intc: interrupt-controller@a0021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xa0021000 0x1000>,
+		      <0xa0022000 0x2000>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+		always-on;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		scmi_sram: sram@2ffff000 {
+			compatible = "mmio-sram";
+			reg = <0x2ffff000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x2ffff000 0x1000>;
+
+			scmi_shm: scmi-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0 0x80>;
+			};
+		};
+
+		spi2: spi@4000b000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI2_K>;
+			resets = <&rcc SPI2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 39 0x400 0x01>,
+			       <&dmamux1 40 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi3: spi@4000c000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI3_K>;
+			resets = <&rcc SPI3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 61 0x400 0x01>,
+			       <&dmamux1 62 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@40010000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40010000 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART4_K>;
+			resets = <&rcc UART4_R>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@40012000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x40012000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C1_K>;
+			resets = <&rcc I2C1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 33 0x400 0x1>,
+			       <&dmamux1 34 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x1>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40013000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x40013000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C2_K>;
+			resets = <&rcc I2C2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 35 0x400 0x1>,
+			       <&dmamux1 36 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x2>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		spi1: spi@44004000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI1_K>;
+			resets = <&rcc SPI1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 37 0x400 0x01>,
+			       <&dmamux1 38 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@48000000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48000000 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dma2: dma-controller@48001000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48001000 0x400>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dmamux1: dma-router@48002000 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x48002000 0x40>;
+			clocks = <&rcc DMAMUX1>;
+			resets = <&rcc DMAMUX1_R>;
+			#dma-cells = <3>;
+			dma-masters = <&dma1 &dma2>;
+			dma-requests = <128>;
+			dma-channels = <16>;
+		};
+
+		spi4: spi@4c002000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4c002000 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI4_K>;
+			resets = <&rcc SPI4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 83 0x400 0x01>,
+			       <&dmamux1 84 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi5: spi@4c003000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4c003000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI5_K>;
+			resets = <&rcc SPI5_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 85 0x400 0x01>,
+			       <&dmamux1 86 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c3: i2c@4c004000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x4c004000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C3_K>;
+			resets = <&rcc I2C3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 73 0x400 0x1>,
+			       <&dmamux1 74 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x4>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		i2c4: i2c@4c005000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x4c005000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C4_K>;
+			resets = <&rcc I2C4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 75 0x400 0x1>,
+			       <&dmamux1 76 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x8>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		i2c5: i2c@4c006000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x4c006000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C5_K>;
+			resets = <&rcc I2C5_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 115 0x400 0x1>,
+			       <&dmamux1 116 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x10>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp13-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-names = "hse", "hsi", "csi", "lse", "lsi";
+			clocks = <&scmi_clk CK_SCMI_HSE>,
+				 <&scmi_clk CK_SCMI_HSI>,
+				 <&scmi_clk CK_SCMI_CSI>,
+				 <&scmi_clk CK_SCMI_LSE>,
+				 <&scmi_clk CK_SCMI_LSI>;
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp13-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+		};
+
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
+		};
+
+		mdma: dma-controller@58000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x58000000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc MDMA>;
+			#dma-cells = <5>;
+			dma-channels = <32>;
+			dma-requests = <48>;
+		};
+
+		sdmmc1: mmc@58005000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x20253180>;
+			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC1_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <130000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@58007000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x20253180>;
+			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <130000000>;
+			status = "disabled";
+		};
+
+		iwdg2: watchdog@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_RTCAPB>,
+				 <&scmi_clk CK_SCMI_RTC>;
+			clock-names = "pclk", "rtc_ck";
+			status = "disabled";
+		};
+
+		bsec: efuse@5c005000 {
+			compatible = "st,stm32mp15-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			part_number_otp: part_number_otp@4 {
+				reg = <0x4 0x2>;
+				bits = <0 12>;
+			};
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
+			};
+		};
+
+		/*
+		 * Break node order to solve dependency probe issue between
+		 * pinctrl and exti.
+		 */
+		pinctrl: pinctrl@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp135-pinctrl";
+			ranges = <0 0x50002000 0x8400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+			pins-are-numbered;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				ngpios = <15>;
+				gpio-ranges = <&pinctrl 0 112 15>;
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				ngpios = <8>;
+				gpio-ranges = <&pinctrl 0 128 8>;
+			};
+		};
+	};
+};