Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 484 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
new file mode 100644
index 000000000..7772a3943
--- /dev/null
+++ b/arch/arm/mach-pxa/poodle.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-pxa/poodle.c
+ *
+ *  Support for the SHARP Poodle Board.
+ *
+ * Based on:
+ *  linux/arch/arm/mach-pxa/lubbock.c Author:	Nicolas Pitre
+ *
+ * Change Log
+ *  12-Dec-2002 Sharp Corporation for Poodle
+ *  John Lenz <lenz@cs.wisc.edu> updates to 2.6
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/i2c-pxa.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/mtd/sharpsl.h>
+#include <linux/memblock.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "pxa25x.h"
+#include "udc.h"
+#include "poodle.h"
+
+#include <linux/platform_data/mmc-pxamci.h>
+#include <linux/platform_data/irda-pxaficp.h>
+#include <linux/platform_data/video-pxafb.h>
+#include <linux/platform_data/asoc-poodle.h>
+
+#include <asm/hardware/scoop.h>
+#include <asm/hardware/locomo.h>
+#include <asm/mach/sharpsl_param.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long poodle_pin_config[] __initdata = {
+	/* I/O */
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO18_RDY,
+
+	/* Clock */
+	GPIO12_32KHz,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+
+	/* Infra-Red */
+	GPIO47_FICP_TXD,
+	GPIO46_FICP_RXD,
+
+	/* FFUART */
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+	GPIO39_FFUART_TXD,
+	GPIO37_FFUART_DSR,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* GPIO */
+	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
+	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
+	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
+	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */
+
+	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
+	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
+};
+
+static struct resource poodle_scoop_resources[] = {
+	[0] = {
+		.start		= 0x10800000,
+		.end		= 0x10800fff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct scoop_config poodle_scoop_setup = {
+	.io_dir		= POODLE_SCOOP_IO_DIR,
+	.io_out		= POODLE_SCOOP_IO_OUT,
+	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
+};
+
+struct platform_device poodle_scoop_device = {
+	.name		= "sharp-scoop",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &poodle_scoop_setup,
+	},
+	.num_resources	= ARRAY_SIZE(poodle_scoop_resources),
+	.resource	= poodle_scoop_resources,
+};
+
+static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
+{
+	.dev        = &poodle_scoop_device.dev,
+	.irq        = POODLE_IRQ_GPIO_CF_IRQ,
+	.cd_irq     = POODLE_IRQ_GPIO_CF_CD,
+	.cd_irq_str = "PCMCIA0 CD",
+},
+};
+
+static struct scoop_pcmcia_config poodle_pcmcia_config = {
+	.devs         = &poodle_pcmcia_scoop[0],
+	.num_devs     = 1,
+};
+
+EXPORT_SYMBOL(poodle_scoop_device);
+
+/* LoCoMo device */
+static struct resource locomo_resources[] = {
+	[0] = {
+		.start		= 0x10000000,
+		.end		= 0x10001fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= PXA_GPIO_TO_IRQ(10),
+		.end		= PXA_GPIO_TO_IRQ(10),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct locomo_platform_data locomo_info = {
+	.irq_base	= IRQ_BOARD_START,
+};
+
+static struct platform_device poodle_locomo_device = {
+	.name		= "locomo",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(locomo_resources),
+	.resource	= locomo_resources,
+	.dev		= {
+		.platform_data	= &locomo_info,
+	},
+};
+
+static struct poodle_audio_platform_data poodle_audio_pdata = {
+	.locomo_dev	= &poodle_locomo_device.dev,
+
+	.gpio_amp_on   	= POODLE_LOCOMO_GPIO_AMP_ON,
+	.gpio_mute_l   	= POODLE_LOCOMO_GPIO_MUTE_L,
+	.gpio_mute_r   	= POODLE_LOCOMO_GPIO_MUTE_R,
+	.gpio_232vcc_on	= POODLE_LOCOMO_GPIO_232VCC_ON,
+	.gpio_jk_b     	= POODLE_LOCOMO_GPIO_JK_B,
+};
+
+static struct platform_device poodle_audio_device = {
+	.name	= "poodle-audio",
+	.id	= -1,
+	.dev.platform_data = &poodle_audio_pdata,
+};
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_controller poodle_spi_info = {
+	.num_chipselect	= 1,
+};
+
+static struct gpiod_lookup_table poodle_spi_gpio_table = {
+	.dev_id = "pxa2xx-spi.1",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", POODLE_GPIO_TP_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct ads7846_platform_data poodle_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= POODLE_GPIO_TP_INT,
+};
+
+static struct spi_board_info poodle_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 10000,
+		.bus_num	= 1,
+		.platform_data	= &poodle_ads7846_info,
+		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
+	},
+};
+
+static void __init poodle_init_spi(void)
+{
+	gpiod_add_lookup_table(&poodle_spi_gpio_table);
+	pxa2xx_set_spi_info(1, &poodle_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
+}
+#else
+static inline void poodle_init_spi(void) {}
+#endif
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
+{
+	int err;
+
+	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
+	if (err)
+		goto err_free_2;
+
+	err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
+	if (err)
+		goto err_free_3;
+
+	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
+	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
+
+	return 0;
+
+err_free_3:
+	gpio_free(POODLE_GPIO_SD_PWR);
+err_free_2:
+	return err;
+}
+
+static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		gpio_set_value(POODLE_GPIO_SD_PWR, 1);
+		mdelay(2);
+		gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
+	} else {
+		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
+		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
+	}
+
+	return 0;
+}
+
+static void poodle_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(POODLE_GPIO_SD_PWR1);
+	gpio_free(POODLE_GPIO_SD_PWR);
+}
+
+static struct pxamci_platform_data poodle_mci_platform_data = {
+	.detect_delay_ms	= 250,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= poodle_mci_init,
+	.setpower 		= poodle_mci_setpower,
+	.exit			= poodle_mci_exit,
+};
+
+static struct gpiod_lookup_table poodle_mci_gpio_table = {
+	.dev_id = "pxa2xx-mci.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_DETECT,
+			    "cd", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_WP,
+			    "wp", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+/*
+ * Irda
+ */
+static struct pxaficp_platform_data poodle_ficp_platform_data = {
+	.gpio_pwdown		= POODLE_GPIO_IR_ON,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+
+/*
+ * USB Device Controller
+ */
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	/* no connect GPIO; poodle can't tell connection status */
+	.gpio_pullup	= POODLE_GPIO_USB_PULLUP,
+};
+
+
+/* PXAFB device */
+static struct pxafb_mode_info poodle_fb_mode = {
+	.pixclock	= 144700,
+	.xres		= 320,
+	.yres		= 240,
+	.bpp		= 16,
+	.hsync_len	= 7,
+	.left_margin	= 11,
+	.right_margin	= 30,
+	.vsync_len	= 2,
+	.upper_margin	= 2,
+	.lower_margin	= 0,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info poodle_fb_info = {
+	.modes		= &poodle_fb_mode,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr sharpsl_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static const char * const probes[] = {
+	"cmdlinepart",
+	"ofpart",
+	"sharpslpart",
+	NULL,
+};
+
+static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
+	.badblock_pattern	= &sharpsl_bbt,
+	.part_parsers		= probes,
+};
+
+static struct resource sharpsl_nand_resources[] = {
+	{
+		.start	= 0x0C000000,
+		.end	= 0x0C000FFF,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sharpsl_nand_device = {
+	.name		= "sharpsl-nand",
+	.id		= -1,
+	.resource	= sharpsl_nand_resources,
+	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
+	.dev.platform_data	= &sharpsl_nand_platform_data,
+};
+
+static struct mtd_partition sharpsl_rom_parts[] = {
+	{
+		.name	="Boot PROM Filesystem",
+		.offset	= 0x00120000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sharpsl_rom_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
+	.parts		= sharpsl_rom_parts,
+};
+
+static struct resource sharpsl_rom_resources[] = {
+	{
+		.start	= 0x00000000,
+		.end	= 0x007fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sharpsl_rom_device = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.resource = sharpsl_rom_resources,
+	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
+	.dev.platform_data = &sharpsl_rom_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&poodle_locomo_device,
+	&poodle_scoop_device,
+	&poodle_audio_device,
+	&sharpsl_nand_device,
+	&sharpsl_rom_device,
+};
+
+static struct i2c_board_info __initdata poodle_i2c_devices[] = {
+	{ I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
+static void poodle_poweroff(void)
+{
+	pxa_restart(REBOOT_HARD, NULL);
+}
+
+static void __init poodle_init(void)
+{
+	int ret = 0;
+
+	pm_power_off = poodle_poweroff;
+
+	PCFR |= PCFR_OPDE;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	platform_scoop_config = &poodle_pcmcia_config;
+
+	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	if (ret)
+		pr_warn("poodle: Unable to register LoCoMo device\n");
+
+	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
+	pxa_set_udc_info(&udc_info);
+	gpiod_add_lookup_table(&poodle_mci_gpio_table);
+	pxa_set_mci_info(&poodle_mci_platform_data);
+	pxa_set_ficp_info(&poodle_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
+	poodle_init_spi();
+	regulator_has_full_constraints();
+}
+
+static void __init fixup_poodle(struct tag *tags, char **cmdline)
+{
+	sharpsl_save_param();
+	memblock_add(0xa0000000, SZ_32M);
+}
+
+MACHINE_START(POODLE, "SHARP Poodle")
+	.fixup		= fixup_poodle,
+	.map_io		= pxa25x_map_io,
+	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
+	.init_irq	= pxa25x_init_irq,
+	.handle_irq	= pxa25x_handle_irq,
+	.init_time	= pxa_timer_init,
+	.init_machine	= poodle_init,
+	.restart	= pxa_restart,
+MACHINE_END