Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 361 insertions, 0 deletions

diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c
new file mode 100644
index 000000000..a8c142e45
--- /dev/null
+++ b/arch/arm/nwfpe/fpa11_cprt.c
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+    (c) Philip Blundell, 1999, 2001
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+*/
+
+#include "fpa11.h"
+#include "fpopcode.h"
+#include "fpa11.inl"
+#include "fpmodule.h"
+#include "fpmodule.inl"
+#include "softfloat.h"
+
+unsigned int PerformFLT(const unsigned int opcode);
+unsigned int PerformFIX(const unsigned int opcode);
+
+static unsigned int PerformComparison(const unsigned int opcode);
+
+unsigned int EmulateCPRT(const unsigned int opcode)
+{
+
+	if (opcode & 0x800000) {
+		/* This is some variant of a comparison (PerformComparison
+		   will sort out which one).  Since most of the other CPRT
+		   instructions are oddball cases of some sort or other it
+		   makes sense to pull this out into a fast path.  */
+		return PerformComparison(opcode);
+	}
+
+	/* Hint to GCC that we'd like a jump table rather than a load of CMPs */
+	switch ((opcode & 0x700000) >> 20) {
+	case FLT_CODE >> 20:
+		return PerformFLT(opcode);
+		break;
+	case FIX_CODE >> 20:
+		return PerformFIX(opcode);
+		break;
+
+	case WFS_CODE >> 20:
+		writeFPSR(readRegister(getRd(opcode)));
+		break;
+	case RFS_CODE >> 20:
+		writeRegister(getRd(opcode), readFPSR());
+		break;
+
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
+unsigned int PerformFLT(const unsigned int opcode)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	struct roundingData roundData;
+
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
+
+	switch (opcode & MASK_ROUNDING_PRECISION) {
+	case ROUND_SINGLE:
+		{
+			fpa11->fType[getFn(opcode)] = typeSingle;
+			fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode)));
+		}
+		break;
+
+	case ROUND_DOUBLE:
+		{
+			fpa11->fType[getFn(opcode)] = typeDouble;
+			fpa11->fpreg[getFn(opcode)].fDouble = int32_to_float64(readRegister(getRd(opcode)));
+		}
+		break;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	case ROUND_EXTENDED:
+		{
+			fpa11->fType[getFn(opcode)] = typeExtended;
+			fpa11->fpreg[getFn(opcode)].fExtended = int32_to_floatx80(readRegister(getRd(opcode)));
+		}
+		break;
+#endif
+
+	default:
+		return 0;
+	}
+
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
+	return 1;
+}
+
+unsigned int PerformFIX(const unsigned int opcode)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	unsigned int Fn = getFm(opcode);
+	struct roundingData roundData;
+
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
+
+	switch (fpa11->fType[Fn]) {
+	case typeSingle:
+		{
+			writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle));
+		}
+		break;
+
+	case typeDouble:
+		{
+			writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble));
+		}
+		break;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	case typeExtended:
+		{
+			writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended));
+		}
+		break;
+#endif
+
+	default:
+		return 0;
+	}
+
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
+	return 1;
+}
+
+/* This instruction sets the flags N, Z, C, V in the FPSR. */
+static unsigned int PerformComparison(const unsigned int opcode)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	unsigned int Fn = getFn(opcode), Fm = getFm(opcode);
+	int e_flag = opcode & 0x400000;	/* 1 if CxFE */
+	int n_flag = opcode & 0x200000;	/* 1 if CNxx */
+	unsigned int flags = 0;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	floatx80 rFn, rFm;
+
+	/* Check for unordered condition and convert all operands to 80-bit
+	   format.
+	   ?? Might be some mileage in avoiding this conversion if possible.
+	   Eg, if both operands are 32-bit, detect this and do a 32-bit
+	   comparison (cheaper than an 80-bit one).  */
+	switch (fpa11->fType[Fn]) {
+	case typeSingle:
+		//printk("single.\n");
+		if (float32_is_nan(fpa11->fpreg[Fn].fSingle))
+			goto unordered;
+		rFn = float32_to_floatx80(fpa11->fpreg[Fn].fSingle);
+		break;
+
+	case typeDouble:
+		//printk("double.\n");
+		if (float64_is_nan(fpa11->fpreg[Fn].fDouble))
+			goto unordered;
+		rFn = float64_to_floatx80(fpa11->fpreg[Fn].fDouble);
+		break;
+
+	case typeExtended:
+		//printk("extended.\n");
+		if (floatx80_is_nan(fpa11->fpreg[Fn].fExtended))
+			goto unordered;
+		rFn = fpa11->fpreg[Fn].fExtended;
+		break;
+
+	default:
+		return 0;
+	}
+
+	if (CONSTANT_FM(opcode)) {
+		//printk("Fm is a constant: #%d.\n",Fm);
+		rFm = getExtendedConstant(Fm);
+		if (floatx80_is_nan(rFm))
+			goto unordered;
+	} else {
+		//printk("Fm = r%d which contains a ",Fm);
+		switch (fpa11->fType[Fm]) {
+		case typeSingle:
+			//printk("single.\n");
+			if (float32_is_nan(fpa11->fpreg[Fm].fSingle))
+				goto unordered;
+			rFm = float32_to_floatx80(fpa11->fpreg[Fm].fSingle);
+			break;
+
+		case typeDouble:
+			//printk("double.\n");
+			if (float64_is_nan(fpa11->fpreg[Fm].fDouble))
+				goto unordered;
+			rFm = float64_to_floatx80(fpa11->fpreg[Fm].fDouble);
+			break;
+
+		case typeExtended:
+			//printk("extended.\n");
+			if (floatx80_is_nan(fpa11->fpreg[Fm].fExtended))
+				goto unordered;
+			rFm = fpa11->fpreg[Fm].fExtended;
+			break;
+
+		default:
+			return 0;
+		}
+	}
+
+	if (n_flag)
+		rFm.high ^= 0x8000;
+
+	/* test for less than condition */
+	if (floatx80_lt(rFn, rFm))
+		flags |= CC_NEGATIVE;
+
+	/* test for equal condition */
+	if (floatx80_eq(rFn, rFm))
+		flags |= CC_ZERO;
+
+	/* test for greater than or equal condition */
+	if (floatx80_lt(rFm, rFn))
+		flags |= CC_CARRY;
+
+#else
+	if (CONSTANT_FM(opcode)) {
+		/* Fm is a constant.  Do the comparison in whatever precision
+		   Fn happens to be stored in.  */
+		if (fpa11->fType[Fn] == typeSingle) {
+			float32 rFm = getSingleConstant(Fm);
+			float32 rFn = fpa11->fpreg[Fn].fSingle;
+
+			if (float32_is_nan(rFn))
+				goto unordered;
+
+			if (n_flag)
+				rFm ^= 0x80000000;
+
+			/* test for less than condition */
+			if (float32_lt_nocheck(rFn, rFm))
+				flags |= CC_NEGATIVE;
+
+			/* test for equal condition */
+			if (float32_eq_nocheck(rFn, rFm))
+				flags |= CC_ZERO;
+
+			/* test for greater than or equal condition */
+			if (float32_lt_nocheck(rFm, rFn))
+				flags |= CC_CARRY;
+		} else {
+			float64 rFm = getDoubleConstant(Fm);
+			float64 rFn = fpa11->fpreg[Fn].fDouble;
+
+			if (float64_is_nan(rFn))
+				goto unordered;
+
+			if (n_flag)
+				rFm ^= 0x8000000000000000ULL;
+
+			/* test for less than condition */
+			if (float64_lt_nocheck(rFn, rFm))
+				flags |= CC_NEGATIVE;
+
+			/* test for equal condition */
+			if (float64_eq_nocheck(rFn, rFm))
+				flags |= CC_ZERO;
+
+			/* test for greater than or equal condition */
+			if (float64_lt_nocheck(rFm, rFn))
+				flags |= CC_CARRY;
+		}
+	} else {
+		/* Both operands are in registers.  */
+		if (fpa11->fType[Fn] == typeSingle
+		    && fpa11->fType[Fm] == typeSingle) {
+			float32 rFm = fpa11->fpreg[Fm].fSingle;
+			float32 rFn = fpa11->fpreg[Fn].fSingle;
+
+			if (float32_is_nan(rFn)
+			    || float32_is_nan(rFm))
+				goto unordered;
+
+			if (n_flag)
+				rFm ^= 0x80000000;
+
+			/* test for less than condition */
+			if (float32_lt_nocheck(rFn, rFm))
+				flags |= CC_NEGATIVE;
+
+			/* test for equal condition */
+			if (float32_eq_nocheck(rFn, rFm))
+				flags |= CC_ZERO;
+
+			/* test for greater than or equal condition */
+			if (float32_lt_nocheck(rFm, rFn))
+				flags |= CC_CARRY;
+		} else {
+			/* Promote 32-bit operand to 64 bits.  */
+			float64 rFm, rFn;
+
+			rFm = (fpa11->fType[Fm] == typeSingle) ?
+			    float32_to_float64(fpa11->fpreg[Fm].fSingle)
+			    : fpa11->fpreg[Fm].fDouble;
+
+			rFn = (fpa11->fType[Fn] == typeSingle) ?
+			    float32_to_float64(fpa11->fpreg[Fn].fSingle)
+			    : fpa11->fpreg[Fn].fDouble;
+
+			if (float64_is_nan(rFn)
+			    || float64_is_nan(rFm))
+				goto unordered;
+
+			if (n_flag)
+				rFm ^= 0x8000000000000000ULL;
+
+			/* test for less than condition */
+			if (float64_lt_nocheck(rFn, rFm))
+				flags |= CC_NEGATIVE;
+
+			/* test for equal condition */
+			if (float64_eq_nocheck(rFn, rFm))
+				flags |= CC_ZERO;
+
+			/* test for greater than or equal condition */
+			if (float64_lt_nocheck(rFm, rFn))
+				flags |= CC_CARRY;
+		}
+	}
+
+#endif
+
+	writeConditionCodes(flags);
+
+	return 1;
+
+      unordered:
+	/* ?? The FPA data sheet is pretty vague about this, in particular
+	   about whether the non-E comparisons can ever raise exceptions.
+	   This implementation is based on a combination of what it says in
+	   the data sheet, observation of how the Acorn emulator actually
+	   behaves (and how programs expect it to) and guesswork.  */
+	flags |= CC_OVERFLOW;
+	flags &= ~(CC_ZERO | CC_NEGATIVE);
+
+	if (BIT_AC & readFPSR())
+		flags |= CC_CARRY;
+
+	if (e_flag)
+		float_raise(float_flag_invalid);
+
+	writeConditionCodes(flags);
+	return 1;
+}