diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi | 355 |
1 files changed, 355 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi new file mode 100644 index 000000000..802ad6e5c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -0,0 +1,355 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2019-2021 TQ-Systems GmbH + */ + +#include "imx8mq.dtsi" + +/ { + model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ"; + compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq"; + + memory@40000000 { + device_type = "memory"; + /* our minimum RAM config will be 1024 MiB */ + reg = <0x00000000 0x40000000 0 0x40000000>; + }; + + /* e-MMC IO, needed for HS modes */ + reg_vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MX_VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "TQMA8MX_VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vdd_arm: regulator-vdd-arm { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dvfs>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-name = "TQMa8Mx_DVFS"; + regulator-type = "voltage"; + regulator-settling-time-us = <150000>; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + states = <900000 0x1 1000000 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + /* 640 MiB */ + size = <0 0x28000000>; + /* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */ + alloc-ranges = <0 0x40000000 0 0x78000000>; + linux,cma-default; + }; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&gpu { + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + fsl,pfuze-support-disable-sw; + reg = <0x8>; + + regulators { + /* VDD_GPU */ + sw1a_reg: sw1ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + /* VDD_VPU */ + sw1c_reg: sw1c { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + /* NVCC_DRAM */ + sw2_reg: sw2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + /* VDD_DRAM */ + sw3a_reg: sw3ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + /* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */ + nvcc_1v8_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + /* not used */ + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + /* VDD_PHY_0V9 */ + vgen2_reg: vgen2 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + /* VDD_PHY_1V8 */ + vgen3_reg: vgen3 { + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + /* VDDA_1V8 */ + vgen4_reg: vgen4 { + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + /* VDD_PHY_3V3 */ + vgen5_reg: vgen5 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + /* not used */ + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + sensor0: temperature-sensor-eeprom@1b { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1b>; + }; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + quartz-load-femtofarads = <7000>; + + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + eeprom1: eeprom@53 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + read-only; + }; + + eeprom0: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&pcie0 { + /* 3.3V supply, only way to switch on internal 1.8V supply using GPR */ + vph-supply = <&vgen5_reg>; +}; + +&pcie1 { + /* 3.3V supply, only way to switch on internal 1.8V supply using GPR */ + vph-supply = <&vgen5_reg>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + assigned-clocks = <&clk IMX8MQ_CLK_QSPI>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <84000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + status = "okay"; +}; + +/* Attention: wdog reset forcing POR needs baseboard support */ +&wdog1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_dvfs: dvfsgrp { + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x16>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f>, + <MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f>; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14 0x40000074>, + <MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15 0x40000074>; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x97>, + <MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>, + <MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x97>, + <MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x97>, + <MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x97>, + <MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x97>; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41>; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83>, + <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3>, + <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3>, + <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3>, + <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3>, + <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3>, + <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3>, + <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3>, + <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3>, + <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3>, + <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83>, + <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85>, + <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5>, + <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5>, + <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5>, + <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5>, + <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5>, + <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5>, + <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5>, + <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5>, + <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5>, + <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85>, + <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87>, + <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7>, + <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7>, + <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7>, + <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7>, + <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7>, + <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7>, + <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7>, + <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7>, + <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7>, + <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87>, + <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6>; + }; +}; |