Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 535 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
new file mode 100644
index 000000000..df152c722
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 37xx family of SoCs.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 37xx SoC";
+	compatible = "marvell,armada3700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * The PSCI firmware region depicted below is the default one
+		 * and should be updated by the bootloader.
+		 */
+		psci-area@4000000 {
+			reg = <0 0x4000000 0 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			clocks = <&nb_periph_clk 16>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		internal-regs@d0000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 32M internal register @ 0xd000_0000 */
+			ranges = <0x0 0x0 0xd0000000 0x2000000>;
+
+			wdt: watchdog@8300 {
+				compatible = "marvell,armada-3700-wdt";
+				reg = <0x8300 0x40>;
+				marvell,system-controller = <&cpu_misc>;
+				clocks = <&xtalclk>;
+			};
+
+			cpu_misc: system-controller@d000 {
+				compatible = "marvell,armada-3700-cpu-misc",
+					     "syscon";
+				reg = <0xd000 0x1000>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,armada-3700-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10600 0xA00>;
+				clocks = <&nb_periph_clk 7>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				num-cs = <4>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11000 0x24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&nb_periph_clk 10>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11080 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11080 0x24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&nb_periph_clk 9>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			avs: avs@11500 {
+				compatible = "marvell,armada-3700-avs",
+					     "syscon";
+				reg = <0x11500 0x40>;
+			};
+
+			uartclk: clock-controller@12010 {
+				compatible = "marvell,armada-3700-uart-clock";
+				reg = <0x12010 0x4>, <0x12210 0x4>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+					 <&tbg 3>, <&xtalclk>;
+				clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S",
+					      "TBG-B-S", "xtal";
+				#clock-cells = <1>;
+			};
+
+			uart0: serial@12000 {
+				compatible = "marvell,armada-3700-uart";
+				reg = <0x12000 0x18>;
+				clocks = <&uartclk 0>;
+				interrupts =
+				<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uart-sum", "uart-tx", "uart-rx";
+				status = "disabled";
+			};
+
+			uart1: serial@12200 {
+				compatible = "marvell,armada-3700-uart-ext";
+				reg = <0x12200 0x30>;
+				clocks = <&uartclk 1>;
+				interrupts =
+				<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "uart-tx", "uart-rx";
+				status = "disabled";
+			};
+
+			nb_periph_clk: nb-periph-clk@13000 {
+				compatible = "marvell,armada-3700-periph-clock-nb",
+					     "syscon";
+				reg = <0x13000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			sb_periph_clk: sb-periph-clk@18000 {
+				compatible = "marvell,armada-3700-periph-clock-sb";
+				reg = <0x18000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			tbg: tbg@13200 {
+				compatible = "marvell,armada-3700-tbg-clock";
+				reg = <0x13200 0x100>;
+				clocks = <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			pinctrl_nb: pinctrl@13800 {
+				compatible = "marvell,armada3710-nb-pinctrl",
+					     "syscon", "simple-mfd";
+				reg = <0x13800 0x100>, <0x13C00 0x20>;
+				/* MPP1[19:0] */
+				gpionb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_nb 0 0 36>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts =
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				xtalclk: xtal-clk {
+					compatible = "marvell,armada-3700-xtal-clock";
+					clock-output-names = "xtal";
+					#clock-cells = <0>;
+				};
+
+				spi_quad_pins: spi-quad-pins {
+					groups = "spi_quad";
+					function = "spi";
+				};
+
+				spi_cs1_pins: spi-cs1-pins {
+					groups = "spi_cs1";
+					function = "spi";
+				};
+
+				i2c1_pins: i2c1-pins {
+					groups = "i2c1";
+					function = "i2c";
+				};
+
+				i2c2_pins: i2c2-pins {
+					groups = "i2c2";
+					function = "i2c";
+				};
+
+				uart1_pins: uart1-pins {
+					groups = "uart1";
+					function = "uart";
+				};
+
+				uart2_pins: uart2-pins {
+					groups = "uart2";
+					function = "uart";
+				};
+
+				mmc_pins: mmc-pins {
+					groups = "emmc_nb";
+					function = "emmc";
+				};
+			};
+
+			nb_pm: syscon@14000 {
+				compatible = "marvell,armada-3700-nb-pm",
+					     "syscon";
+				reg = <0x14000 0x60>;
+			};
+
+			comphy: phy@18300 {
+				compatible = "marvell,comphy-a3700";
+				reg = <0x18300 0x300>,
+				      <0x1F000 0x400>,
+				      <0x5C000 0x400>,
+				      <0xe0178 0x8>;
+				reg-names = "comphy",
+					    "lane1_pcie_gbe",
+					    "lane0_usb3_gbe",
+					    "lane2_sata_usb3";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&xtalclk>;
+				clock-names = "xtal";
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+			};
+
+			pinctrl_sb: pinctrl@18800 {
+				compatible = "marvell,armada3710-sb-pinctrl",
+					     "syscon", "simple-mfd";
+				reg = <0x18800 0x100>, <0x18C00 0x20>;
+				/* MPP2[23:0] */
+				gpiosb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_sb 0 0 30>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts =
+					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				rgmii_pins: mii-pins {
+					groups = "rgmii";
+					function = "mii";
+				};
+
+				smi_pins: smi-pins {
+					groups = "smi";
+					function = "smi";
+				};
+
+				sdio_pins: sdio-pins {
+					groups = "sdio_sb";
+					function = "sdio";
+				};
+
+				pcie_reset_pins: pcie-reset-pins {
+					groups = "pcie1"; /* this actually controls "pcie1_reset" */
+					function = "gpio";
+				};
+
+				pcie_clkreq_pins: pcie-clkreq-pins {
+					groups = "pcie1_clkreq";
+					function = "pcie";
+				};
+			};
+
+			eth0: ethernet@30000 {
+				   compatible = "marvell,armada-3700-neta";
+				   reg = <0x30000 0x4000>;
+				   interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				   clocks = <&sb_periph_clk 8>;
+				   status = "disabled";
+			};
+
+			mdio: mdio@32004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x32004 0x4>;
+			};
+
+			eth1: ethernet@40000 {
+				compatible = "marvell,armada-3700-neta";
+				reg = <0x40000 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 7>;
+				status = "disabled";
+			};
+
+			usb3: usb@58000 {
+				compatible = "marvell,armada3700-xhci",
+				"generic-xhci";
+				reg = <0x58000 0x4000>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 12>;
+				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
+				phy-names = "usb3-phy", "usb2-utmi-otg-phy";
+				status = "disabled";
+			};
+
+			usb2_utmi_otg_phy: phy@5d000 {
+				compatible = "marvell,a3700-utmi-otg-phy";
+				reg = <0x5d000 0x800>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb32_syscon: system-controller@5d800 {
+				compatible = "marvell,armada-3700-usb2-host-device-misc",
+				"syscon";
+				reg = <0x5d800 0x800>;
+			};
+
+			usb2: usb@5e000 {
+				compatible = "marvell,armada-3700-ehci";
+				reg = <0x5e000 0x1000>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_utmi_host_phy>;
+				phy-names = "usb2-utmi-host-phy";
+				status = "disabled";
+			};
+
+			usb2_utmi_host_phy: phy@5f000 {
+				compatible = "marvell,a3700-utmi-host-phy";
+				reg = <0x5f000 0x800>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb2_syscon: system-controller@5f800 {
+				compatible = "marvell,armada-3700-usb2-host-misc",
+				"syscon";
+				reg = <0x5f800 0x800>;
+			};
+
+			xor@60900 {
+				compatible = "marvell,armada-3700-xor";
+				reg = <0x60900 0x100>,
+				      <0x60b00 0x100>;
+
+				xor10 {
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			crypto: crypto@90000 {
+				compatible = "inside-secure,safexcel-eip97ies";
+				reg = <0x90000 0x20000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "mem", "ring0", "ring1",
+						  "ring2", "ring3", "eip";
+				clocks = <&nb_periph_clk 15>;
+			};
+
+			rwtm: mailbox@b0000 {
+				compatible = "marvell,armada-3700-rwtm-mailbox";
+				reg = <0xb0000 0x100>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+			};
+
+			sdhci1: mmc@d0000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd0000 0x300>,
+				      <0x1e808 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sdhci0: mmc@d8000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd8000 0x300>,
+				      <0x17808 0x4>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sata: sata@e0000 {
+				compatible = "marvell,armada-3700-ahci";
+				reg = <0xe0000 0x178>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 1>;
+				phys = <&comphy2 0>;
+				phy-names = "sata-phy";
+				status = "disabled";
+			};
+
+			gic: interrupt-controller@1d00000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x1d00000 0x10000>, /* GICD */
+				      <0x1d40000 0x40000>, /* GICR */
+				      <0x1d80000 0x2000>,  /* GICC */
+				      <0x1d90000 0x2000>,  /* GICH */
+				      <0x1da0000 0x20000>; /* GICV */
+				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie0: pcie@d0070000 {
+			compatible = "marvell,armada-3700-pcie";
+			device_type = "pci";
+			status = "disabled";
+			reg = <0 0xd0070000 0 0x20000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			clocks = <&sb_periph_clk 13>;
+			msi-parent = <&pcie0>;
+			msi-controller;
+			/*
+			 * The 128 MiB address range [0xe8000000-0xf0000000] is
+			 * dedicated for PCIe and can be assigned to 8 windows
+			 * with size a power of two. Use one 64 KiB window for
+			 * IO at the end and the remaining seven windows
+			 * (totaling 127 MiB) for MEM.
+			 */
+			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
+				  0x81000000 0 0x00000000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			max-link-speed = <2>;
+			phys = <&comphy1 0>;
+			pcie_intc: interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware";
+			mboxes = <&rwtm 0>;
+			status = "okay";
+		};
+	};
+};