Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 482 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
new file mode 100644
index 000000000..3255bd3fc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp_a";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default>;
+	};
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		muic: extcon@25 {
+			compatible = "siliconmitus,sm5502-muic";
+
+			reg = <0x25>;
+			interrupt-parent = <&msmgpio>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&muic_int_default>;
+		};
+	};
+
+	i2c-tkey {
+		compatible = "i2c-gpio";
+		sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey: touchkey@20 {
+			/* Note: Actually an ABOV MCU that implements same interface */
+			compatible = "coreriver,tc360-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&msmgpio>;
+			interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
+
+			/* vcc/vdd-supply are board-specific */
+			vddio-supply = <&pm8916_l6>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&tkey_default>;
+		};
+	};
+
+	i2c-nfc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nfc@27 {
+			compatible = "samsung,s3fwrn5-i2c";
+			reg = <0x27>;
+
+			interrupt-parent = <&msmgpio>;
+			interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+			en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
+
+			clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&nfc_default &nfc_clk_req>;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer: accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	battery@35 {
+		compatible = "richtek,rt5033-battery";
+		reg = <0x35>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fg_alert_default>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&dsi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_default>;
+	pinctrl-1 = <&mdss_sleep>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pronto {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&muic>, <&muic>;
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&smd_rpm_regulators {
+	vdd_l1_l2_l3-supply = <&pm8916_s3>;
+	vdd_l4_l5_l6-supply = <&pm8916_s4>;
+	vdd_l7-supply = <&pm8916_s4>;
+
+	s3 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1300000>;
+	};
+
+	s4 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2100000>;
+	};
+
+	l1 {
+		regulator-min-microvolt = <1225000>;
+		regulator-max-microvolt = <1225000>;
+	};
+
+	l2 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	l4 {
+		regulator-min-microvolt = <2050000>;
+		regulator-max-microvolt = <2050000>;
+	};
+
+	l5 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l6 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l7 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l8 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	l9 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l10 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	l11 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+		regulator-allow-set-load;
+		regulator-system-load = <200000>;
+	};
+
+	l12 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+	};
+
+	l13 {
+		regulator-min-microvolt = <3075000>;
+		regulator-max-microvolt = <3075000>;
+	};
+
+	l14 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l15 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+
+	l18 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+	};
+};
+
+&msmgpio {
+	accel_int_default: accel-int-default {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fg_alert_default: fg-alert-default {
+		pins = "gpio121";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default {
+		pins = "gpio52";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdss {
+		mdss_default: mdss-default {
+			pins = "gpio25";
+			function = "gpio";
+
+			drive-strength = <8>;
+			bias-disable;
+		};
+		mdss_sleep: mdss-sleep {
+			pins = "gpio25";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	muic_i2c_default: muic-i2c-default {
+		pins = "gpio105", "gpio106";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default: muic-int-default {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default {
+		pins = "gpio20", "gpio49";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+
+		irq {
+			pins = "gpio21";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	nfc_i2c_default: nfc-i2c-default {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_default: tkey-default {
+		pins = "gpio98";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_i2c_default: tkey-i2c-default {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default {
+		pins = "gpio73";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&pm8916_gpios {
+	nfc_clk_req: nfc-clk-req-state {
+		pins = "gpio2";
+		function = "func1";
+
+		input-enable;
+		bias-disable;
+		power-source = <PM8916_GPIO_L2>;
+	};
+};