Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2544 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
new file mode 100644
index 000000000..243054926
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -0,0 +1,2544 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
+#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,sdm660.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,apr.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc1 = &sdhc_1;
+		mmc2 = &sdhc_2;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <200>;
+			};
+
+			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <154>;
+				exit-latency-us = <87>;
+				min-residency-us = <200>;
+			};
+
+			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <262>;
+				exit-latency-us = <301>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <284>;
+				exit-latency-us = <384>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <272>;
+				exit-latency-us = <329>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <332>;
+				exit-latency-us = <368>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <545>;
+				exit-latency-us = <1609>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8998", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		wlan_msa_guard: wlan-msa-guard@85600000 {
+			reg = <0x0 0x85600000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa-mem@85700000 {
+			reg = <0x0 0x85700000 0x0 0x100000>;
+			no-map;
+		};
+
+		qhee_code: qhee-code@85800000 {
+			reg = <0x0 0x85800000 0x0 0x600000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@85e00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85e00000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		smem_region: smem-mem@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x3300000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8ac00000 {
+			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
+			no-map;
+		};
+
+		adsp_region: adsp@92a00000 {
+			reg = <0x0 0x92a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		mba_region: mba@94800000 {
+			reg = <0x0 0x94800000 0x0 0x200000>;
+			no-map;
+		};
+
+		buffer_mem: tzbuffer@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x100000>;
+			no-map;
+		};
+
+		venus_region: venus@9f800000 {
+			reg = <0x0 0x9f800000 0x0 0x800000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@f6000000 {
+			reg = <0x0 0xf6000000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom-region@f6800000 {
+			reg = <0x0 0xf6800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		zap_shader_region: gpu@fed00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xfed00000 0x0 0xa00000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sdm660";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
+			rpmpd: power-controller {
+				compatible = "qcom,sdm660-rpmpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmpd_opp_table>;
+
+				rpmpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmpd_opp_ret: opp1 {
+						opp-level = <RPM_SMD_LEVEL_RETENTION>;
+					};
+
+					rpmpd_opp_ret_plus: opp2 {
+						opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+					};
+
+					rpmpd_opp_min_svs: opp3 {
+						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					};
+
+					rpmpd_opp_low_svs: opp4 {
+						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					};
+
+					rpmpd_opp_svs: opp5 {
+						opp-level = <RPM_SMD_LEVEL_SVS>;
+					};
+
+					rpmpd_opp_svs_plus: opp6 {
+						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					};
+
+					rpmpd_opp_nom: opp7 {
+						opp-level = <RPM_SMD_LEVEL_NOM>;
+					};
+
+					rpmpd_opp_nom_plus: opp8 {
+						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					};
+
+					rpmpd_opp_turbo: opp9 {
+						opp-level = <RPM_SMD_LEVEL_TURBO>;
+					};
+				};
+			};
+		};
+	};
+
+	smem: smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 10>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm630";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00100000 0x94000>;
+
+			clock-names = "xo", "sleep_clk";
+			clocks = <&xo_board>,
+					<&sleep_clk>;
+		};
+
+		rpm_msg_ram: sram@778000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00778000 0x7000>;
+		};
+
+		qfprom: qfprom@780000 {
+			compatible = "qcom,sdm630-qfprom", "qcom,qfprom";
+			reg = <0x00780000 0x621c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@240 {
+				reg = <0x243 0x1>;
+				bits = <1 3>;
+			};
+
+			gpu_speed_bin: gpu-speed-bin@41a0 {
+				reg = <0x41a2 0x1>;
+				bits = <5 7>;
+			};
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x00793000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		bimc: interconnect@1008000 {
+			compatible = "qcom,sdm660-bimc";
+			reg = <0x01008000 0x78000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		restart@10ac000 {
+			compatible = "qcom,pshold";
+			reg = <0x010ac000 0x4>;
+		};
+
+		cnoc: interconnect@1500000 {
+			compatible = "qcom,sdm660-cnoc";
+			reg = <0x01500000 0x10000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
+		snoc: interconnect@1626000 {
+			compatible = "qcom,sdm660-snoc";
+			reg = <0x01626000 0x7090>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		anoc2_smmu: iommu@16c0000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x016c0000 0x40000>;
+
+			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			assigned-clock-rates = <1000>;
+			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "bus";
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		a2noc: interconnect@1704000 {
+			compatible = "qcom,sdm660-a2noc";
+			reg = <0x01704000 0xc100>;
+			#interconnect-cells = <1>;
+			clock-names = "bus",
+				      "bus_a",
+				      "ipa",
+				      "ufs_axi",
+				      "aggre2_ufs_axi",
+				      "aggre2_usb3_axi",
+				      "cfg_noc_usb2_axi";
+			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+				 <&rpmcc RPM_SMD_IPA_CLK>,
+				 <&gcc GCC_UFS_AXI_CLK>,
+				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
+		};
+
+		mnoc: interconnect@1745000 {
+			compatible = "qcom,sdm660-mnoc";
+			reg = <0x01745000 0xA010>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a", "iface";
+			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
+				 <&mmcc AHB_CLK_SRC>;
+		};
+
+		tsens: thermal-sensor@10ae000 {
+			compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
+			reg = <0x010ae000 0x1000>, /* TM */
+				  <0x010ad000 0x1000>; /* SROT */
+			#qcom,sensors = <12>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					 <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,sdm630-tcsr", "syscon";
+			reg = <0x01f60000 0x20000>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,sdm630-pinctrl";
+			reg = <0x03100000 0x400000>,
+				  <0x03500000 0x400000>,
+				  <0x03900000 0x400000>;
+			reg-names = "south", "center", "north";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 114>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_uart1_default: blsp1-uart1-default {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default {
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_default: blsp2-uart1-active {
+				tx-rts {
+					pins = "gpio16", "gpio19";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx {
+					/*
+					 * Avoid garbage data while BT module
+					 * is powered off or not driving signal
+					 */
+					pins = "gpio17";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cts {
+					/* Match the pull of the BT module */
+					pins = "gpio18";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_uart1_sleep: blsp2-uart1-sleep {
+				tx {
+					pins = "gpio16";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rx-cts-rts {
+					pins = "gpio17", "gpio18", "gpio19";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			i2c1_default: i2c1-default {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c2_default: i2c2-default {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c3_default: i2c3-default {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c3_sleep: i2c3-sleep {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c4_default: i2c4-default {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_sleep: i2c4-sleep {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c5_default: i2c5-default {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c6_default: i2c6-default {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c7_default: i2c7-default {
+				pins = "gpio26", "gpio27";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep {
+				pins = "gpio26", "gpio27";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c8_default: i2c8-default {
+				pins = "gpio30", "gpio31";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c8_sleep: i2c8-sleep {
+				pins = "gpio30", "gpio31";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_default: cci0_default {
+				pinmux {
+					pins = "gpio36","gpio37";
+					function = "cci_i2c";
+				};
+
+				pinconf {
+					pins = "gpio36","gpio37";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			cci1_default: cci1_default {
+				pinmux {
+					pins = "gpio38","gpio39";
+					function = "cci_i2c";
+				};
+
+				pinconf {
+					pins = "gpio38","gpio39";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc1_state_on: sdc1-on {
+				clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off {
+				clk {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off {
+				clk {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		adreno_gpu: gpu@5000000 {
+			compatible = "qcom,adreno-508.0", "qcom,adreno";
+
+			reg = <0x05000000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				<&gpucc GPUCC_RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_GPU_BIMC_GFX_CLK>,
+				<&gpucc GPUCC_RBCPR_CLK>,
+				<&gpucc GPUCC_GFX3D_CLK>;
+
+			clock-names = "iface",
+				"rbbmtimer",
+				"mem",
+				"mem_iface",
+				"rbcpr",
+				"core";
+
+			power-domains = <&rpmpd SDM660_VDDMX>;
+			iommus = <&kgsl_smmu 0>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>;
+			interconnect-names = "gfx-mem";
+
+			operating-points-v2 = <&gpu_sdm630_opp_table>;
+
+			status = "disabled";
+
+			gpu_sdm630_opp_table: opp-table {
+				compatible = "operating-points-v2";
+				opp-775000000 {
+					opp-hz = /bits/ 64 <775000000>;
+					opp-level = <RPM_SMD_LEVEL_TURBO>;
+					opp-peak-kBps = <5412000>;
+					opp-supported-hw = <0xA2>;
+				};
+				opp-647000000 {
+					opp-hz = /bits/ 64 <647000000>;
+					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					opp-peak-kBps = <4068000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-588000000 {
+					opp-hz = /bits/ 64 <588000000>;
+					opp-level = <RPM_SMD_LEVEL_NOM>;
+					opp-peak-kBps = <3072000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-465000000 {
+					opp-hz = /bits/ 64 <465000000>;
+					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					opp-peak-kBps = <2724000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-370000000 {
+					opp-hz = /bits/ 64 <370000000>;
+					opp-level = <RPM_SMD_LEVEL_SVS>;
+					opp-peak-kBps = <2188000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1648000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-160000000 {
+					opp-hz = /bits/ 64 <160000000>;
+					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1200000>;
+					opp-supported-hw = <0xFF>;
+				};
+			};
+		};
+
+		kgsl_smmu: iommu@5040000 {
+			compatible = "qcom,sdm630-smmu-v2",
+				     "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0x05040000 0x10000>;
+
+			/*
+			 * GX GDSC parent is CX. We need to bring up CX for SMMU
+			 * but we need both up for Adreno. On the other hand, we
+			 * need to manage the GX rpmpd domain in the adreno driver.
+			 * Enable CX/GX GDSCs here so that we can manage just the GX
+			 * RPM Power Domain in the Adreno driver.
+			 */
+			power-domains = <&gpucc GPU_GX_GDSC>;
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
+			clock-names = "iface", "mem", "mem_iface";
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		gpucc: clock-controller@5065000 {
+			compatible = "qcom,gpucc-sdm630";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x05065000 0x9038>;
+
+			clocks = <&xo_board>,
+				 <&gcc GCC_GPU_GPLL0_CLK>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK>;
+			clock-names = "xo",
+				      "gcc_gpu_gpll0_clk",
+				      "gcc_gpu_gpll0_div_clk";
+			status = "disabled";
+		};
+
+		lpass_smmu: iommu@5100000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05100000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		sram@290000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		spmi_bus: spmi@800f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg =	<0x0800f000 0x1000>,
+				<0x08400000 0x1000000>,
+				<0x09400000 0x1000000>,
+				<0x0a400000 0x220000>,
+				<0x0800a000 0x3000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		usb3: usb@a8f8800 {
+			compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+			reg = <0x0a8f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "bus";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>,
+					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>,
+					       <19200000>;
+
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			power-domains = <&gcc USB_30_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+
+			resets = <&gcc GCC_USB_30_BCR>;
+
+			usb3_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a800000 0xc8d0>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+
+				/*
+				 * SDM630 technically supports USB3 but I
+				 * haven't seen any devices making use of it.
+				 */
+				maximum-speed = "high-speed";
+				phys = <&qusb2phy0>;
+				phy-names = "usb2-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
+			};
+		};
+
+		qusb2phy0: phy@c012000 {
+			compatible = "qcom,sdm660-qusb2-phy";
+			reg = <0x0c012000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_RX0_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+			status = "disabled";
+		};
+
+		qusb2phy1: phy@c014000 {
+			compatible = "qcom,sdm660-qusb2-phy";
+			reg = <0x0c014000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@c084000 {
+			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0c084000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			bus-width = <4>;
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+					<&gcc GCC_SDCC2_APPS_CLK>,
+					<&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+
+			interconnects = <&a2noc 3 &a2noc 10>,
+					<&gnoc 0 &cnoc 28>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_state_on>;
+			pinctrl-1 = <&sdc2_state_off>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				 compatible = "operating-points-v2";
+
+				 opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <200000 140000>;
+					opp-avg-kBps = <130718 133320>;
+				 };
+				 opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-peak-kBps = <250000 160000>;
+					opp-avg-kBps = <196078 150000>;
+				 };
+				 opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				 };
+			};
+		};
+
+		sdhc_1: mmc@c0c4000 {
+			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0c0c4000 0x1000>,
+			      <0x0c0c5000 0x1000>,
+			      <0x0c0c8000 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			interconnects = <&a2noc 2 &a2noc 10>,
+					<&gnoc 0 &cnoc 27>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			operating-points-v2 = <&sdhc1_opp_table>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <200000 140000>;
+					opp-avg-kBps = <130718 133320>;
+				};
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-peak-kBps = <250000 160000>;
+					opp-avg-kBps = <196078 150000>;
+				};
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				};
+			};
+		};
+
+		usb2: usb@c2f8800 {
+			compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+			reg = <0x0c2f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core",
+				      "mock_utmi", "sleep";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <60000000>;
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			qcom,select-utmi-as-pipe-clk;
+
+			resets = <&gcc GCC_USB_20_BCR>;
+
+			usb2_dwc3: usb@c200000 {
+				compatible = "snps,dwc3";
+				reg = <0x0c200000 0xc8d0>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+
+				/* This is the HS-only host */
+				maximum-speed = "high-speed";
+				phys = <&qusb2phy1>;
+				phy-names = "usb2-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
+			};
+		};
+
+		mmcc: clock-controller@c8c0000 {
+			compatible = "qcom,mmcc-sdm630";
+			reg = <0x0c8c0000 0x40000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "xo",
+					"sleep_clk",
+					"gpll0",
+					"gpll0_div",
+					"dsi0pll",
+					"dsi0pllbyte",
+					"dsi1pll",
+					"dsi1pllbyte",
+					"dp_link_2x_clk_divsel_five",
+					"dp_vco_divided_clk_src_mux";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+					<&sleep_clk>,
+					<&gcc GCC_MMSS_GPLL0_CLK>,
+					<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
+					<&dsi0_phy 1>,
+					<&dsi0_phy 0>,
+					<0>,
+					<0>,
+					<0>,
+					<0>;
+		};
+
+		dsi_opp_table: opp-table-dsi {
+			compatible = "operating-points-v2";
+
+			opp-131250000 {
+				opp-hz = /bits/ 64 <131250000>;
+				required-opps = <&rpmpd_opp_svs>;
+			};
+
+			opp-210000000 {
+				opp-hz = /bits/ 64 <210000000>;
+				required-opps = <&rpmpd_opp_svs_plus>;
+			};
+
+			opp-262500000 {
+				opp-hz = /bits/ 64 <262500000>;
+				required-opps = <&rpmpd_opp_nom>;
+			};
+		};
+
+		mdss: mdss@c900000 {
+			compatible = "qcom,mdss";
+			reg = <0x0c900000 0x1000>,
+			      <0x0c9b0000 0x1040>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>,
+				 <&mmcc MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			mdp: mdp@c901000 {
+				compatible = "qcom,mdp5";
+				reg = <0x0c901000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				assigned-clocks = <&mmcc MDSS_MDP_CLK>,
+						  <&mmcc MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <300000000>,
+						       <19200000>;
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				interconnects = <&mnoc 2 &bimc 5>,
+						<&mnoc 3 &bimc 5>,
+						<&gnoc 0 &mnoc 17>;
+				interconnect-names = "mdp0-mem",
+						     "mdp1-mem",
+						     "rotator-mem";
+				iommus = <&mmss_smmu 0>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SDM660_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-150000000 {
+						opp-hz = /bits/ 64 <150000000>;
+						opp-peak-kBps = <320000 320000 76800>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+					opp-275000000 {
+						opp-hz = /bits/ 64 <275000000>;
+						opp-peak-kBps = <6400000 6400000 160000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						opp-peak-kBps = <6400000 6400000 190000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+					opp-330000000 {
+						opp-hz = /bits/ 64 <330000000>;
+						opp-peak-kBps = <6400000 6400000 240000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+					opp-412500000 {
+						opp-hz = /bits/ 64 <412500000>;
+						opp-peak-kBps = <6400000 6400000 320000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			dsi0: dsi@c994000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x0c994000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SDM660_VDDCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>,
+							 <&dsi0_phy 1>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_BYTE0_INTF_CLK>,
+					 <&mmcc MNOC_AHB_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MISC_AHB_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "byte",
+					      "byte_intf",
+					      "mnoc",
+					      "iface",
+					      "bus",
+					      "core_mmss",
+					      "pixel",
+					      "core";
+
+				phys = <&dsi0_phy>;
+				phy-names = "dsi";
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi0_phy: dsi-phy@c994400 {
+				compatible = "qcom,dsi-phy-14nm-660";
+				reg = <0x0c994400 0x100>,
+				      <0x0c994500 0x300>,
+				      <0x0c994800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+				status = "disabled";
+			};
+		};
+
+		blsp1_dma: dma-controller@c144000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c144000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart1: serial@c16f000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c16f000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@c170000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c170000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@c175000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c175000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+					<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@c176000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c176000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@c177000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c177000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_default>;
+			pinctrl-1 = <&i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@c178000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c178000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@c184000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c184000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp2_uart1: serial@c1af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c1af000 0x200>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@c1b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b5000 0x600>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@c1b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b6000 0x600>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c7: i2c@c1b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b7000 0x600>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c8: i2c@c1b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b8000 0x600>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c8_default>;
+			pinctrl-1 = <&i2c8_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sram@146bf000 {
+			compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
+			reg = <0x146bf000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x146bf000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		camss: camss@ca00020 {
+			compatible = "qcom,sdm660-camss";
+			reg = <0x0ca00020 0x10>,
+			      <0x0ca30000 0x100>,
+			      <0x0ca30400 0x100>,
+			      <0x0ca30800 0x100>,
+			      <0x0ca30c00 0x100>,
+			      <0x0c824000 0x1000>,
+			      <0x0ca00120 0x4>,
+			      <0x0c825000 0x1000>,
+			      <0x0ca00124 0x4>,
+			      <0x0c826000 0x1000>,
+			      <0x0ca00128 0x4>,
+			      <0x0ca31000 0x500>,
+			      <0x0ca10000 0x1000>,
+			      <0x0ca14000 0x1000>;
+			reg-names = "csi_clk_mux",
+				    "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid3",
+				    "csiphy0",
+				    "csiphy0_clk_mux",
+				    "csiphy1",
+				    "csiphy1_clk_mux",
+				    "csiphy2",
+				    "csiphy2_clk_mux",
+				    "ispif",
+				    "vfe0",
+				    "vfe1";
+			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid3",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "ispif",
+					  "vfe0",
+					  "vfe1";
+			clocks = <&mmcc CAMSS_AHB_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID0_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID1_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID2_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID3_CLK>,
+				 <&mmcc CAMSS_CSI0_AHB_CLK>,
+				 <&mmcc CAMSS_CSI0_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID0_CLK>,
+				 <&mmcc CAMSS_CSI0PIX_CLK>,
+				 <&mmcc CAMSS_CSI0RDI_CLK>,
+				 <&mmcc CAMSS_CSI1_AHB_CLK>,
+				 <&mmcc CAMSS_CSI1_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID1_CLK>,
+				 <&mmcc CAMSS_CSI1PIX_CLK>,
+				 <&mmcc CAMSS_CSI1RDI_CLK>,
+				 <&mmcc CAMSS_CSI2_AHB_CLK>,
+				 <&mmcc CAMSS_CSI2_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID2_CLK>,
+				 <&mmcc CAMSS_CSI2PIX_CLK>,
+				 <&mmcc CAMSS_CSI2RDI_CLK>,
+				 <&mmcc CAMSS_CSI3_AHB_CLK>,
+				 <&mmcc CAMSS_CSI3_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID3_CLK>,
+				 <&mmcc CAMSS_CSI3PIX_CLK>,
+				 <&mmcc CAMSS_CSI3RDI_CLK>,
+				 <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+				 <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+				 <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+				 <&mmcc CSIPHY_AHB2CRIF_CLK>,
+				 <&mmcc CAMSS_CSI_VFE0_CLK>,
+				 <&mmcc CAMSS_CSI_VFE1_CLK>,
+				 <&mmcc CAMSS_ISPIF_AHB_CLK>,
+				 <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+				 <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_VFE0_AHB_CLK>,
+				 <&mmcc CAMSS_VFE0_CLK>,
+				 <&mmcc CAMSS_VFE0_STREAM_CLK>,
+				 <&mmcc CAMSS_VFE1_AHB_CLK>,
+				 <&mmcc CAMSS_VFE1_CLK>,
+				 <&mmcc CAMSS_VFE1_STREAM_CLK>,
+				 <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+				 <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
+			clock-names = "ahb",
+				      "cphy_csid0",
+				      "cphy_csid1",
+				      "cphy_csid2",
+				      "cphy_csid3",
+				      "csi0_ahb",
+				      "csi0",
+				      "csi0_phy",
+				      "csi0_pix",
+				      "csi0_rdi",
+				      "csi1_ahb",
+				      "csi1",
+				      "csi1_phy",
+				      "csi1_pix",
+				      "csi1_rdi",
+				      "csi2_ahb",
+				      "csi2",
+				      "csi2_phy",
+				      "csi2_pix",
+				      "csi2_rdi",
+				      "csi3_ahb",
+				      "csi3",
+				      "csi3_phy",
+				      "csi3_pix",
+				      "csi3_rdi",
+				      "csiphy0_timer",
+				      "csiphy1_timer",
+				      "csiphy2_timer",
+				      "csiphy_ahb2crif",
+				      "csi_vfe0",
+				      "csi_vfe1",
+				      "ispif_ahb",
+				      "throttle_axi",
+				      "top_ahb",
+				      "vfe0_ahb",
+				      "vfe0",
+				      "vfe0_stream",
+				      "vfe1_ahb",
+				      "vfe1",
+				      "vfe1_stream",
+				      "vfe_ahb",
+				      "vfe_axi";
+			interconnects = <&mnoc 5 &bimc 5>;
+			interconnect-names = "vfe-mem";
+			iommus = <&mmss_smmu 0xc00>,
+				 <&mmss_smmu 0xc01>,
+				 <&mmss_smmu 0xc02>,
+				 <&mmss_smmu 0xc03>;
+			power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+					<&mmcc CAMSS_VFE1_GDSC>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci: cci@ca0c000 {
+			compatible = "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0ca0c000 0x1000>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+
+			assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
+					  <&mmcc CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80800000>, <37500000>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CLK>,
+				 <&mmcc CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci",
+				      "camss_ahb";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			power-domains = <&mmcc CAMSS_TOP_GDSC>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		venus: video-codec@cc00000 {
+			compatible = "qcom,sdm660-venus";
+			reg = <0x0cc00000 0xff000>;
+			clocks = <&mmcc VIDEO_CORE_CLK>,
+				 <&mmcc VIDEO_AHB_CLK>,
+				 <&mmcc VIDEO_AXI_CLK>,
+				 <&mmcc THROTTLE_VIDEO_AXI_CLK>;
+			clock-names = "core", "iface", "bus", "bus_throttle";
+			interconnects = <&gnoc 0 &mnoc 13>,
+					<&mnoc 4 &bimc 5>;
+			interconnect-names = "cpu-cfg", "video-mem";
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&mmss_smmu 0x400>,
+				 <&mmss_smmu 0x401>,
+				 <&mmss_smmu 0x40a>,
+				 <&mmss_smmu 0x407>,
+				 <&mmss_smmu 0x40e>,
+				 <&mmss_smmu 0x40f>,
+				 <&mmss_smmu 0x408>,
+				 <&mmss_smmu 0x409>,
+				 <&mmss_smmu 0x40b>,
+				 <&mmss_smmu 0x40c>,
+				 <&mmss_smmu 0x40d>,
+				 <&mmss_smmu 0x410>,
+				 <&mmss_smmu 0x421>,
+				 <&mmss_smmu 0x428>,
+				 <&mmss_smmu 0x429>,
+				 <&mmss_smmu 0x42b>,
+				 <&mmss_smmu 0x42c>,
+				 <&mmss_smmu 0x42d>,
+				 <&mmss_smmu 0x411>,
+				 <&mmss_smmu 0x431>;
+			memory-region = <&venus_region>;
+			power-domains = <&mmcc VENUS_GDSC>;
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "vcodec0_core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "vcodec0_core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+		};
+
+		mmss_smmu: iommu@cd00000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x0cd00000 0x40000>;
+
+			clocks = <&mmcc MNOC_AHB_CLK>,
+				 <&mmcc BIMC_SMMU_AHB_CLK>,
+				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
+				 <&mmcc BIMC_SMMU_AXI_CLK>;
+			clock-names = "iface-mm", "iface-smmu",
+				      "bus-mm", "bus-smmu";
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		adsp_pil: remoteproc@15700000 {
+			compatible = "qcom,sdm660-adsp-pas";
+			reg = <0x15700000 0x4040>;
+
+			interrupts-extended =
+				<&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+			power-domain-names = "cx";
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+
+				label = "lpass";
+				mboxes = <&apcs_glb 9>;
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6core {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
+
+					q6afe: apr-service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: apr-service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&lpass_smmu 1>;
+						};
+					};
+
+					q6adm: apr-service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		gnoc: interconnect@17900000 {
+			compatible = "qcom,sdm660-gnoc";
+			reg = <0x17900000 0xe000>;
+			#interconnect-cells = <1>;
+			/*
+			 * This one apparently features no clocks,
+			 * so let's not mess with the driver needlessly
+			 */
+			clock-names = "bus", "bus_a";
+			clocks = <&xo_board>, <&xo_board>;
+		};
+
+		apcs_glb: mailbox@17911000 {
+			compatible = "qcom,sdm660-apcs-hmss-global";
+			reg = <0x17911000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@17920000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17920000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17921000 {
+				frame-number = <0>;
+				interrupts = <0 8 0x4>,
+						<0 7 0x4>;
+				reg = <0x17921000 0x1000>,
+					<0x17922000 0x1000>;
+			};
+
+			frame@17923000 {
+				frame-number = <1>;
+				interrupts = <0 9 0x4>;
+				reg = <0x17923000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17924000 {
+				frame-number = <2>;
+				interrupts = <0 10 0x4>;
+				reg = <0x17924000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17925000 {
+				frame-number = <3>;
+				interrupts = <0 11 0x4>;
+				reg = <0x17925000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17926000 {
+				frame-number = <4>;
+				interrupts = <0 12 0x4>;
+				reg = <0x17926000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17927000 {
+				frame-number = <5>;
+				interrupts = <0 13 0x4>;
+				reg = <0x17927000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17928000 {
+				frame-number = <6>;
+				interrupts = <0 14 0x4>;
+				reg = <0x17928000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x17a00000 0x10000>,	   /* GICD */
+				  <0x17b00000 0x100000>;	  /* GICR * 8 */
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		/*
+		 * According to what downstream DTS says,
+		 * the entire power efficient cluster has
+		 * only a single thermal sensor.
+		 */
+
+		pwr-cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				pwr_cluster_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				pwr_cluster_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 0xf08>,
+				 <GIC_PPI 2 0xf08>,
+				 <GIC_PPI 3 0xf08>,
+				 <GIC_PPI 0 0xf08>;
+	};
+};
+