Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 310 insertions, 0 deletions

diff --git a/arch/arm64/lib/strncmp.S b/arch/arm64/lib/strncmp.S
new file mode 100644
index 000000000..fe7bbc0b4
--- /dev/null
+++ b/arch/arm64/lib/strncmp.S
@@ -0,0 +1,310 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2013-2022, Arm Limited.
+ *
+ * Adapted from the original at:
+ * https://github.com/ARM-software/optimized-routines/blob/189dfefe37d54c5b/string/aarch64/strncmp.S
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64.
+ * MTE compatible.
+ */
+
+#define L(label) .L ## label
+
+#define REP8_01 0x0101010101010101
+#define REP8_7f 0x7f7f7f7f7f7f7f7f
+
+/* Parameters and result.  */
+#define src1		x0
+#define src2		x1
+#define limit		x2
+#define result		x0
+
+/* Internal variables.  */
+#define data1		x3
+#define data1w		w3
+#define data2		x4
+#define data2w		w4
+#define has_nul		x5
+#define diff		x6
+#define syndrome	x7
+#define tmp1		x8
+#define tmp2		x9
+#define tmp3		x10
+#define zeroones	x11
+#define pos		x12
+#define mask		x13
+#define endloop		x14
+#define count		mask
+#define offset		pos
+#define neg_offset	x15
+
+/* Define endian dependent shift operations.
+   On big-endian early bytes are at MSB and on little-endian LSB.
+   LS_FW means shifting towards early bytes.
+   LS_BK means shifting towards later bytes.
+   */
+#ifdef __AARCH64EB__
+#define LS_FW lsl
+#define LS_BK lsr
+#else
+#define LS_FW lsr
+#define LS_BK lsl
+#endif
+
+SYM_FUNC_START(__pi_strncmp)
+	cbz	limit, L(ret0)
+	eor	tmp1, src1, src2
+	mov	zeroones, #REP8_01
+	tst	tmp1, #7
+	and	count, src1, #7
+	b.ne	L(misaligned8)
+	cbnz	count, L(mutual_align)
+
+	/* NUL detection works on the principle that (X - 1) & (~X) & 0x80
+	   (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
+	   can be done in parallel across the entire word.  */
+	.p2align 4
+L(loop_aligned):
+	ldr	data1, [src1], #8
+	ldr	data2, [src2], #8
+L(start_realigned):
+	subs	limit, limit, #8
+	sub	tmp1, data1, zeroones
+	orr	tmp2, data1, #REP8_7f
+	eor	diff, data1, data2	/* Non-zero if differences found.  */
+	csinv	endloop, diff, xzr, hi	/* Last Dword or differences.  */
+	bics	has_nul, tmp1, tmp2	/* Non-zero if NUL terminator.  */
+	ccmp	endloop, #0, #0, eq
+	b.eq	L(loop_aligned)
+	/* End of main loop */
+
+L(full_check):
+#ifndef __AARCH64EB__
+	orr	syndrome, diff, has_nul
+	add	limit, limit, 8	/* Rewind limit to before last subs. */
+L(syndrome_check):
+	/* Limit was reached. Check if the NUL byte or the difference
+	   is before the limit. */
+	rev	syndrome, syndrome
+	rev	data1, data1
+	clz	pos, syndrome
+	rev	data2, data2
+	lsl	data1, data1, pos
+	cmp	limit, pos, lsr #3
+	lsl	data2, data2, pos
+	/* But we need to zero-extend (char is unsigned) the value and then
+	   perform a signed 32-bit subtraction.  */
+	lsr	data1, data1, #56
+	sub	result, data1, data2, lsr #56
+	csel result, result, xzr, hi
+	ret
+#else
+	/* Not reached the limit, must have found the end or a diff.  */
+	tbz	limit, #63, L(not_limit)
+	add	tmp1, limit, 8
+	cbz	limit, L(not_limit)
+
+	lsl	limit, tmp1, #3	/* Bits -> bytes.  */
+	mov	mask, #~0
+	lsr	mask, mask, limit
+	bic	data1, data1, mask
+	bic	data2, data2, mask
+
+	/* Make sure that the NUL byte is marked in the syndrome.  */
+	orr	has_nul, has_nul, mask
+
+L(not_limit):
+	/* For big-endian we cannot use the trick with the syndrome value
+	   as carry-propagation can corrupt the upper bits if the trailing
+	   bytes in the string contain 0x01.  */
+	/* However, if there is no NUL byte in the dword, we can generate
+	   the result directly.  We can't just subtract the bytes as the
+	   MSB might be significant.  */
+	cbnz	has_nul, 1f
+	cmp	data1, data2
+	cset	result, ne
+	cneg	result, result, lo
+	ret
+1:
+	/* Re-compute the NUL-byte detection, using a byte-reversed value.  */
+	rev	tmp3, data1
+	sub	tmp1, tmp3, zeroones
+	orr	tmp2, tmp3, #REP8_7f
+	bic	has_nul, tmp1, tmp2
+	rev	has_nul, has_nul
+	orr	syndrome, diff, has_nul
+	clz	pos, syndrome
+	/* The most-significant-non-zero bit of the syndrome marks either the
+	   first bit that is different, or the top bit of the first zero byte.
+	   Shifting left now will bring the critical information into the
+	   top bits.  */
+L(end_quick):
+	lsl	data1, data1, pos
+	lsl	data2, data2, pos
+	/* But we need to zero-extend (char is unsigned) the value and then
+	   perform a signed 32-bit subtraction.  */
+	lsr	data1, data1, #56
+	sub	result, data1, data2, lsr #56
+	ret
+#endif
+
+L(mutual_align):
+	/* Sources are mutually aligned, but are not currently at an
+	   alignment boundary.  Round down the addresses and then mask off
+	   the bytes that precede the start point.
+	   We also need to adjust the limit calculations, but without
+	   overflowing if the limit is near ULONG_MAX.  */
+	bic	src1, src1, #7
+	bic	src2, src2, #7
+	ldr	data1, [src1], #8
+	neg	tmp3, count, lsl #3	/* 64 - bits(bytes beyond align). */
+	ldr	data2, [src2], #8
+	mov	tmp2, #~0
+	LS_FW	tmp2, tmp2, tmp3	/* Shift (count & 63).  */
+	/* Adjust the limit and ensure it doesn't overflow.  */
+	adds	limit, limit, count
+	csinv	limit, limit, xzr, lo
+	orr	data1, data1, tmp2
+	orr	data2, data2, tmp2
+	b	L(start_realigned)
+
+	.p2align 4
+	/* Don't bother with dwords for up to 16 bytes.  */
+L(misaligned8):
+	cmp	limit, #16
+	b.hs	L(try_misaligned_words)
+
+L(byte_loop):
+	/* Perhaps we can do better than this.  */
+	ldrb	data1w, [src1], #1
+	ldrb	data2w, [src2], #1
+	subs	limit, limit, #1
+	ccmp	data1w, #1, #0, hi	/* NZCV = 0b0000.  */
+	ccmp	data1w, data2w, #0, cs	/* NZCV = 0b0000.  */
+	b.eq	L(byte_loop)
+L(done):
+	sub	result, data1, data2
+	ret
+	/* Align the SRC1 to a dword by doing a bytewise compare and then do
+	   the dword loop.  */
+L(try_misaligned_words):
+	cbz	count, L(src1_aligned)
+
+	neg	count, count
+	and	count, count, #7
+	sub	limit, limit, count
+
+L(page_end_loop):
+	ldrb	data1w, [src1], #1
+	ldrb	data2w, [src2], #1
+	cmp	data1w, #1
+	ccmp	data1w, data2w, #0, cs	/* NZCV = 0b0000.  */
+	b.ne	L(done)
+	subs	count, count, #1
+	b.hi	L(page_end_loop)
+
+	/* The following diagram explains the comparison of misaligned strings.
+	   The bytes are shown in natural order. For little-endian, it is
+	   reversed in the registers. The "x" bytes are before the string.
+	   The "|" separates data that is loaded at one time.
+	   src1     | a a a a a a a a | b b b c c c c c | . . .
+	   src2     | x x x x x a a a   a a a a a b b b | c c c c c . . .
+
+	   After shifting in each step, the data looks like this:
+	                STEP_A              STEP_B              STEP_C
+	   data1    a a a a a a a a     b b b c c c c c     b b b c c c c c
+	   data2    a a a a a a a a     b b b 0 0 0 0 0     0 0 0 c c c c c
+
+	   The bytes with "0" are eliminated from the syndrome via mask.
+
+	   Align SRC2 down to 16 bytes. This way we can read 16 bytes at a
+	   time from SRC2. The comparison happens in 3 steps. After each step
+	   the loop can exit, or read from SRC1 or SRC2. */
+L(src1_aligned):
+	/* Calculate offset from 8 byte alignment to string start in bits. No
+	   need to mask offset since shifts are ignoring upper bits. */
+	lsl	offset, src2, #3
+	bic	src2, src2, #0xf
+	mov	mask, -1
+	neg	neg_offset, offset
+	ldr	data1, [src1], #8
+	ldp	tmp1, tmp2, [src2], #16
+	LS_BK	mask, mask, neg_offset
+	and	neg_offset, neg_offset, #63	/* Need actual value for cmp later. */
+	/* Skip the first compare if data in tmp1 is irrelevant. */
+	tbnz	offset, 6, L(misaligned_mid_loop)
+
+L(loop_misaligned):
+	/* STEP_A: Compare full 8 bytes when there is enough data from SRC2.*/
+	LS_FW	data2, tmp1, offset
+	LS_BK	tmp1, tmp2, neg_offset
+	subs	limit, limit, #8
+	orr	data2, data2, tmp1	/* 8 bytes from SRC2 combined from two regs.*/
+	sub	has_nul, data1, zeroones
+	eor	diff, data1, data2	/* Non-zero if differences found.  */
+	orr	tmp3, data1, #REP8_7f
+	csinv	endloop, diff, xzr, hi	/* If limit, set to all ones. */
+	bic	has_nul, has_nul, tmp3	/* Non-zero if NUL byte found in SRC1. */
+	orr	tmp3, endloop, has_nul
+	cbnz	tmp3, L(full_check)
+
+	ldr	data1, [src1], #8
+L(misaligned_mid_loop):
+	/* STEP_B: Compare first part of data1 to second part of tmp2. */
+	LS_FW	data2, tmp2, offset
+#ifdef __AARCH64EB__
+	/* For big-endian we do a byte reverse to avoid carry-propagation
+	problem described above. This way we can reuse the has_nul in the
+	next step and also use syndrome value trick at the end. */
+	rev	tmp3, data1
+	#define data1_fixed tmp3
+#else
+	#define data1_fixed data1
+#endif
+	sub	has_nul, data1_fixed, zeroones
+	orr	tmp3, data1_fixed, #REP8_7f
+	eor	diff, data2, data1	/* Non-zero if differences found.  */
+	bic	has_nul, has_nul, tmp3	/* Non-zero if NUL terminator.  */
+#ifdef __AARCH64EB__
+	rev	has_nul, has_nul
+#endif
+	cmp	limit, neg_offset, lsr #3
+	orr	syndrome, diff, has_nul
+	bic	syndrome, syndrome, mask	/* Ignore later bytes. */
+	csinv	tmp3, syndrome, xzr, hi	/* If limit, set to all ones. */
+	cbnz	tmp3, L(syndrome_check)
+
+	/* STEP_C: Compare second part of data1 to first part of tmp1. */
+	ldp	tmp1, tmp2, [src2], #16
+	cmp	limit, #8
+	LS_BK	data2, tmp1, neg_offset
+	eor	diff, data2, data1	/* Non-zero if differences found.  */
+	orr	syndrome, diff, has_nul
+	and	syndrome, syndrome, mask	/* Ignore earlier bytes. */
+	csinv	tmp3, syndrome, xzr, hi	/* If limit, set to all ones. */
+	cbnz	tmp3, L(syndrome_check)
+
+	ldr	data1, [src1], #8
+	sub	limit, limit, #8
+	b	L(loop_misaligned)
+
+#ifdef	__AARCH64EB__
+L(syndrome_check):
+	clz	pos, syndrome
+	cmp	pos, limit, lsl #3
+	b.lo	L(end_quick)
+#endif
+
+L(ret0):
+	mov	result, #0
+	ret
+SYM_FUNC_END(__pi_strncmp)
+SYM_FUNC_ALIAS_WEAK(strncmp, __pi_strncmp)
+EXPORT_SYMBOL_NOKASAN(strncmp)