Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 379 insertions, 0 deletions

diff --git a/arch/mips/bmips/Kconfig b/arch/mips/bmips/Kconfig
new file mode 100644
index 000000000..63dfc6950
--- /dev/null
+++ b/arch/mips/bmips/Kconfig
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+if BMIPS_GENERIC
+
+choice
+	prompt "Built-in device tree"
+	help
+	  Legacy bootloaders do not pass a DTB pointer to the kernel, so
+	  if a "wrapper" is not being used, the kernel will need to include
+	  a device tree that matches the target board.
+
+	  The builtin DTB will only be used if the firmware does not supply
+	  a valid DTB.
+
+config DT_NONE
+	bool "None"
+
+config DT_BCM93384WVG
+	bool "BCM93384WVG Zephyr CPU"
+	select BUILTIN_DTB
+
+config DT_BCM93384WVG_VIPER
+	bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
+	select BUILTIN_DTB
+
+config DT_BCM96368MVWG
+	bool "BCM96368MVWG"
+	select BUILTIN_DTB
+
+config DT_BCM9EJTAGPRB
+	bool "BCM9EJTAGPRB"
+	select BUILTIN_DTB
+
+config DT_BCM97125CBMB
+	bool "BCM97125CBMB"
+	select BUILTIN_DTB
+
+config DT_BCM97346DBSMB
+	bool "BCM97346DBSMB"
+	select BUILTIN_DTB
+
+config DT_BCM97358SVMB
+	bool "BCM97358SVMB"
+	select BUILTIN_DTB
+
+config DT_BCM97360SVMB
+	bool "BCM97360SVMB"
+	select BUILTIN_DTB
+
+config DT_BCM97362SVMB
+	bool "BCM97362SVMB"
+	select BUILTIN_DTB
+
+config DT_BCM97420C
+	bool "BCM97420C"
+	select BUILTIN_DTB
+
+config DT_BCM97425SVMB
+	bool "BCM97425SVMB"
+	select BUILTIN_DTB
+
+config DT_BCM97435SVMB
+	bool "BCM97435SVMB"
+	select BUILTIN_DTB
+
+config DT_COMTREND_VR3032U
+	bool "Comtrend VR-3032u"
+	select BUILTIN_DTB
+
+config DT_NETGEAR_CVG834G
+	bool "NETGEAR CVG834G"
+	select BUILTIN_DTB
+
+config DT_SFR_NEUFBOX4_SERCOMM
+	bool "SFR Neufbox 4 (Sercomm)"
+	select BUILTIN_DTB
+
+config DT_SFR_NEUFBOX6_SERCOMM
+	bool "SFR Neufbox 6 (Sercomm)"
+	select BUILTIN_DTB
+
+endchoice
+
+endif
diff --git a/arch/mips/bmips/Makefile b/arch/mips/bmips/Makefile
new file mode 100644
index 000000000..1165bf2ef
--- /dev/null
+++ b/arch/mips/bmips/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y		+= setup.o irq.o dma.o
diff --git a/arch/mips/bmips/Platform b/arch/mips/bmips/Platform
new file mode 100644
index 000000000..1434ea31c
--- /dev/null
+++ b/arch/mips/bmips/Platform
@@ -0,0 +1,6 @@
+#
+# Broadcom Generic BMIPS kernel
+#
+cflags-$(CONFIG_BMIPS_GENERIC)		+=				\
+		-I$(srctree)/arch/mips/include/asm/mach-bmips/
+load-$(CONFIG_BMIPS_GENERIC)		:= 0xffffffff80010000
diff --git a/arch/mips/bmips/dma.c b/arch/mips/bmips/dma.c
new file mode 100644
index 000000000..3779e7855
--- /dev/null
+++ b/arch/mips/bmips/dma.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/types.h>
+#include <linux/dma-map-ops.h>
+#include <asm/bmips.h>
+#include <asm/io.h>
+
+bool bmips_rac_flush_disable;
+
+void arch_sync_dma_for_cpu_all(void)
+{
+	void __iomem *cbr = BMIPS_GET_CBR();
+	u32 cfg;
+
+	if (boot_cpu_type() != CPU_BMIPS3300 &&
+	    boot_cpu_type() != CPU_BMIPS4350 &&
+	    boot_cpu_type() != CPU_BMIPS4380)
+		return;
+
+	if (unlikely(bmips_rac_flush_disable))
+		return;
+
+	/* Flush stale data out of the readahead cache */
+	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
+	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
+	__raw_readl(cbr + BMIPS_RAC_CONFIG);
+}
diff --git a/arch/mips/bmips/irq.c b/arch/mips/bmips/irq.c
new file mode 100644
index 000000000..c4daa590b
--- /dev/null
+++ b/arch/mips/bmips/irq.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ * Author: Kevin Cernekee <cernekee@gmail.com>
+ */
+
+#include <linux/of.h>
+#include <linux/irqchip.h>
+
+#include <asm/bmips.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+#include <asm/time.h>
+
+static const struct of_device_id smp_intc_dt_match[] = {
+	{ .compatible = "brcm,bcm7038-l1-intc" },
+	{ .compatible = "brcm,bcm6345-l1-intc" },
+	{}
+};
+
+unsigned int get_c0_compare_int(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
+
+void __init arch_init_irq(void)
+{
+	struct device_node *dn;
+
+	/* Only these controllers support SMP IRQ affinity */
+	dn = of_find_matching_node(NULL, smp_intc_dt_match);
+	if (dn)
+		of_node_put(dn);
+	else
+		bmips_tp1_irqs = 0;
+
+	irqchip_init();
+}
+
+IRQCHIP_DECLARE(mips_cpu_intc, "mti,cpu-interrupt-controller",
+	     mips_cpu_irq_of_init);
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
new file mode 100644
index 000000000..549a6392a
--- /dev/null
+++ b/arch/mips/bmips/setup.c
@@ -0,0 +1,219 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2014 Kevin Cernekee <cernekee@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/memblock.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_clk.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/libfdt.h>
+#include <linux/smp.h>
+#include <asm/addrspace.h>
+#include <asm/bmips.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu-type.h>
+#include <asm/mipsregs.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+#include <asm/traps.h>
+#include <asm/fw/cfe/cfe_api.h>
+
+#define RELO_NORMAL_VEC		BIT(18)
+
+#define REG_BCM6328_OTP		((void __iomem *)CKSEG1ADDR(0x1000062c))
+#define BCM6328_TP1_DISABLED	BIT(9)
+
+extern bool bmips_rac_flush_disable;
+
+static const unsigned long kbase = VMLINUX_LOAD_ADDRESS & 0xfff00000;
+
+struct bmips_quirk {
+	const char		*compatible;
+	void			(*quirk_fn)(void);
+};
+
+static void kbase_setup(void)
+{
+	__raw_writel(kbase | RELO_NORMAL_VEC,
+		     BMIPS_GET_CBR() + BMIPS_RELO_VECTOR_CONTROL_1);
+	ebase = kbase;
+}
+
+static void bcm3384_viper_quirks(void)
+{
+	/*
+	 * Some experimental CM boxes are set up to let CM own the Viper TP0
+	 * and let Linux own TP1.  This requires moving the kernel
+	 * load address to a non-conflicting region (e.g. via
+	 * CONFIG_PHYSICAL_START) and supplying an alternate DTB.
+	 * If we detect this condition, we need to move the MIPS exception
+	 * vectors up to an area that we own.
+	 *
+	 * This is distinct from the OTHER special case mentioned in
+	 * smp-bmips.c (boot on TP1, but enable SMP, then TP0 becomes our
+	 * logical CPU#1).  For the Viper TP1 case, SMP is off limits.
+	 *
+	 * Also note that many BMIPS435x CPUs do not have a
+	 * BMIPS_RELO_VECTOR_CONTROL_1 register, so it isn't safe to just
+	 * write VMLINUX_LOAD_ADDRESS into that register on every SoC.
+	 */
+	board_ebase_setup = &kbase_setup;
+	bmips_smp_enabled = 0;
+}
+
+static void bcm63xx_fixup_cpu1(void)
+{
+	/*
+	 * The bootloader has set up the CPU1 reset vector at
+	 * 0xa000_0200.
+	 * This conflicts with the special interrupt vector (IV).
+	 * The bootloader has also set up CPU1 to respond to the wrong
+	 * IPI interrupt.
+	 * Here we will start up CPU1 in the background and ask it to
+	 * reconfigure itself then go back to sleep.
+	 */
+	memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
+	__sync();
+	set_c0_cause(C_SW0);
+	cpumask_set_cpu(1, &bmips_booted_mask);
+}
+
+static void bcm6328_quirks(void)
+{
+	/* Check CPU1 status in OTP (it is usually disabled) */
+	if (__raw_readl(REG_BCM6328_OTP) & BCM6328_TP1_DISABLED)
+		bmips_smp_enabled = 0;
+	else
+		bcm63xx_fixup_cpu1();
+}
+
+static void bcm6358_quirks(void)
+{
+	/*
+	 * BCM3368/BCM6358 need special handling for their shared TLB, so
+	 * disable SMP for now
+	 */
+	bmips_smp_enabled = 0;
+
+	/*
+	 * RAC flush causes kernel panics on BCM6358 when booting from TP1
+	 * because the bootloader is not initializing it properly.
+	 */
+	bmips_rac_flush_disable = !!(read_c0_brcm_cmt_local() & (1 << 31));
+}
+
+static void bcm6368_quirks(void)
+{
+	bcm63xx_fixup_cpu1();
+}
+
+static const struct bmips_quirk bmips_quirk_list[] = {
+	{ "brcm,bcm3368",		&bcm6358_quirks			},
+	{ "brcm,bcm3384-viper",		&bcm3384_viper_quirks		},
+	{ "brcm,bcm33843-viper",	&bcm3384_viper_quirks		},
+	{ "brcm,bcm6328",		&bcm6328_quirks			},
+	{ "brcm,bcm6358",		&bcm6358_quirks			},
+	{ "brcm,bcm6362",		&bcm6368_quirks			},
+	{ "brcm,bcm6368",		&bcm6368_quirks			},
+	{ "brcm,bcm63168",		&bcm6368_quirks			},
+	{ "brcm,bcm63268",		&bcm6368_quirks			},
+	{ },
+};
+
+static void __init bmips_init_cfe(void)
+{
+	cfe_seal = fw_arg3;
+
+	if (cfe_seal != CFE_EPTSEAL)
+		return;
+
+	cfe_init(fw_arg0, fw_arg2);
+}
+
+void __init prom_init(void)
+{
+	bmips_init_cfe();
+	bmips_cpu_setup();
+	register_bmips_smp_ops();
+}
+
+const char *get_system_type(void)
+{
+	return "Generic BMIPS kernel";
+}
+
+void __init plat_time_init(void)
+{
+	struct device_node *np;
+	u32 freq;
+
+	np = of_find_node_by_name(NULL, "cpus");
+	if (!np)
+		panic("missing 'cpus' DT node");
+	if (of_property_read_u32(np, "mips-hpt-frequency", &freq) < 0)
+		panic("missing 'mips-hpt-frequency' property");
+	of_node_put(np);
+
+	mips_hpt_frequency = freq;
+}
+
+void __init plat_mem_setup(void)
+{
+	void *dtb;
+	const struct bmips_quirk *q;
+
+	set_io_port_base(0);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+
+	/* intended to somewhat resemble ARM; see Documentation/arm/booting.rst */
+	if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
+		dtb = phys_to_virt(fw_arg2);
+	else
+		dtb = get_fdt();
+
+	if (!dtb)
+		cfe_die("no dtb found");
+
+	__dt_setup_arch(dtb);
+
+	for (q = bmips_quirk_list; q->quirk_fn; q++) {
+		if (of_flat_dt_is_compatible(of_get_flat_dt_root(),
+					     q->compatible)) {
+			q->quirk_fn();
+		}
+	}
+}
+
+void __init device_tree_init(void)
+{
+	struct device_node *np;
+
+	unflatten_and_copy_device_tree();
+
+	/* Disable SMP boot unless both CPUs are listed in DT and !disabled */
+	np = of_find_node_by_name(NULL, "cpus");
+	if (np && of_get_available_child_count(np) <= 1)
+		bmips_smp_enabled = 0;
+	of_node_put(np);
+}
+
+static int __init plat_dev_init(void)
+{
+	of_clk_init(NULL);
+	return 0;
+}
+
+arch_initcall(plat_dev_init);