Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 363 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
new file mode 100644
index 000000000..ecebc27a2
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC832x RDB Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8323ERDB";
+	compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet1;
+		ethernet1 = &enet0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8323@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <16384>;	// L1, 16K
+			i-cache-size = <16384>;	// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc8323@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		ipic:pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		par_io@1400 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1400 0x100>;
+			ranges = <3 0x1448 0x18>;
+			compatible = "fsl,mpc8323-qe-pario";
+			device_type = "par_io";
+			num-ports = <7>;
+
+			qe_pio_d: gpio-controller@1448 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8323-qe-pario-bank";
+				reg = <3 0x18>;
+				gpio-controller;
+			};
+
+			ucc2pio:ucc_pin@2 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					3  4  3  0  2  0 	/* MDIO */
+					3  5  1  0  2  0 	/* MDC */
+					3 21  2  0  1  0 	/* RX_CLK (CLK16) */
+					3 23  2  0  1  0 	/* TX_CLK (CLK3) */
+					0 18  1  0  1  0 	/* TxD0 */
+					0 19  1  0  1  0 	/* TxD1 */
+					0 20  1  0  1  0 	/* TxD2 */
+					0 21  1  0  1  0 	/* TxD3 */
+					0 22  2  0  1  0 	/* RxD0 */
+					0 23  2  0  1  0 	/* RxD1 */
+					0 24  2  0  1  0 	/* RxD2 */
+					0 25  2  0  1  0 	/* RxD3 */
+					0 26  2  0  1  0 	/* RX_ER */
+					0 27  1  0  1  0 	/* TX_ER */
+					0 28  2  0  1  0 	/* RX_DV */
+					0 29  2  0  1  0 	/* COL */
+					0 30  1  0  1  0 	/* TX_EN */
+					0 31  2  0  1  0>;      /* CRS */
+			};
+			ucc3pio:ucc_pin@3 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0 13  2  0  1  0 	/* RX_CLK (CLK9) */
+					3 24  2  0  1  0 	/* TX_CLK (CLK10) */
+					1  0  1  0  1  0 	/* TxD0 */
+					1  1  1  0  1  0 	/* TxD1 */
+					1  2  1  0  1  0 	/* TxD2 */
+					1  3  1  0  1  0 	/* TxD3 */
+					1  4  2  0  1  0 	/* RxD0 */
+					1  5  2  0  1  0 	/* RxD1 */
+					1  6  2  0  1  0 	/* RxD2 */
+					1  7  2  0  1  0 	/* RxD3 */
+					1  8  2  0  1  0 	/* RX_ER */
+					1  9  1  0  1  0 	/* TX_ER */
+					1 10  2  0  1  0 	/* RX_DV */
+					1 11  2  0  1  0 	/* COL */
+					1 12  1  0  1  0 	/* TX_EN */
+					1 13  2  0  1  0>;      /* CRS */
+			};
+		};
+	};
+
+	qe@e0100000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xe0100000 0x00100000>;
+		reg = <0xe0100000 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+
+		muram@10000 {
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x00010000 0x00004000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
+				reg = <0x0 0x4000>;
+			};
+		};
+
+		spi@4c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x4c0 0x40>;
+			interrupts = <2>;
+			interrupt-parent = <&qeic>;
+			cs-gpios = <&qe_pio_d 13 0>;
+			mode = "cpu-qe";
+
+			mmc-slot@0 {
+				compatible = "fsl,mpc8323rdb-mmc-slot",
+					     "mmc-spi-slot";
+				reg = <0>;
+				gpios = <&qe_pio_d 14 1
+					 &qe_pio_d 15 0>;
+				voltage-ranges = <3300 3300>;
+				spi-max-frequency = <50000000>;
+			};
+		};
+
+		spi@500 {
+			cell-index = <1>;
+			compatible = "fsl,spi";
+			reg = <0x500 0x40>;
+			interrupts = <1>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		enet0: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <2>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk16";
+			tx-clock-name = "clk3";
+			phy-handle = <&phy00>;
+			pio-handle = <&ucc2pio>;
+		};
+
+		enet1: ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <3>;
+			reg = <0x2200 0x200>;
+			interrupts = <34>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk9";
+			tx-clock-name = "clk10";
+			phy-handle = <&phy04>;
+			pio-handle = <&ucc3pio>;
+		};
+
+		mdio@3120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			phy00:ethernet-phy@0 {
+				reg = <0x0>;
+			};
+			phy04:ethernet-phy@4 {
+				reg = <0x4>;
+			};
+		};
+
+		qeic:interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			big-endian;
+			interrupts = <32 0x8 33 0x8>; //high:32 low:33
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x10 AD16 (USB) */
+				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
+
+				/* IDSEL 0x11 AD17 (Mini1)*/
+				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
+
+				/* IDSEL 0x12 AD18 (PCI/Mini2) */
+				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
+
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
+	};
+};