Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 1411 insertions, 0 deletions

diff --git a/arch/powerpc/mm/book3s32/Makefile b/arch/powerpc/mm/book3s32/Makefile
new file mode 100644
index 000000000..50dd8f6bd
--- /dev/null
+++ b/arch/powerpc/mm/book3s32/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+
+KASAN_SANITIZE_mmu.o := n
+
+ifdef CONFIG_KASAN
+CFLAGS_mmu.o  		+= -DDISABLE_BRANCH_PROFILING
+endif
+
+obj-y += mmu.o mmu_context.o
+obj-$(CONFIG_PPC_BOOK3S_603) += nohash_low.o
+obj-$(CONFIG_PPC_BOOK3S_604) += hash_low.o tlb.o
+obj-$(CONFIG_PPC_KUAP) += kuap.o
diff --git a/arch/powerpc/mm/book3s32/hash_low.S b/arch/powerpc/mm/book3s32/hash_low.S
new file mode 100644
index 000000000..6925ce998
--- /dev/null
+++ b/arch/powerpc/mm/book3s32/hash_low.S
@@ -0,0 +1,598 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *
+ *  This file contains low-level assembler routines for managing
+ *  the PowerPC MMU hash table.  (PPC 8xx processors don't use a
+ *  hash table, so this file is not used on them.)
+ */
+
+#include <linux/pgtable.h>
+#include <linux/init.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/export.h>
+#include <asm/feature-fixups.h>
+#include <asm/code-patching-asm.h>
+
+#ifdef CONFIG_PTE_64BIT
+#define PTE_T_SIZE		8
+#define PTE_FLAGS_OFFSET	4	/* offset of PTE flags, in bytes */
+#else
+#define PTE_T_SIZE		4
+#define PTE_FLAGS_OFFSET	0
+#endif
+
+/*
+ * Load a PTE into the hash table, if possible.
+ * The address is in r4, and r3 contains an access flag:
+ * _PAGE_RW (0x400) if a write.
+ * r9 contains the SRR1 value, from which we use the MSR_PR bit.
+ * SPRG_THREAD contains the physical address of the current task's thread.
+ *
+ * Returns to the caller if the access is illegal or there is no
+ * mapping for the address.  Otherwise it places an appropriate PTE
+ * in the hash table and returns from the exception.
+ * Uses r0, r3 - r6, r8, r10, ctr, lr.
+ */
+	.text
+_GLOBAL(hash_page)
+#ifdef CONFIG_SMP
+	lis	r8, (mmu_hash_lock - PAGE_OFFSET)@h
+	ori	r8, r8, (mmu_hash_lock - PAGE_OFFSET)@l
+	lis	r0,0x0fff
+	b	10f
+11:	lwz	r6,0(r8)
+	cmpwi	0,r6,0
+	bne	11b
+10:	lwarx	r6,0,r8
+	cmpwi	0,r6,0
+	bne-	11b
+	stwcx.	r0,0,r8
+	bne-	10b
+	isync
+#endif
+	/* Get PTE (linux-style) and check access */
+	lis	r0, TASK_SIZE@h		/* check if kernel address */
+	cmplw	0,r4,r0
+	mfspr	r8,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
+	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
+	lwz	r5,PGDIR(r8)		/* virt page-table root */
+	blt+	112f			/* assume user more likely */
+	lis	r5,swapper_pg_dir@ha	/* if kernel address, use */
+	addi	r5,r5,swapper_pg_dir@l	/* kernel page table */
+	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
+112:	tophys(r5, r5)
+#ifndef CONFIG_PTE_64BIT
+	rlwimi	r5,r4,12,20,29		/* insert top 10 bits of address */
+	lwz	r8,0(r5)		/* get pmd entry */
+	rlwinm.	r8,r8,0,0,19		/* extract address of pte page */
+#else
+	rlwinm	r8,r4,13,19,29		/* Compute pgdir/pmd offset */
+	lwzx	r8,r8,r5		/* Get L1 entry */
+	rlwinm.	r8,r8,0,0,20		/* extract pt base address */
+#endif
+#ifdef CONFIG_SMP
+	beq-	.Lhash_page_out		/* return if no mapping */
+#else
+	/* XXX it seems like the 601 will give a machine fault on the
+	   rfi if its alignment is wrong (bottom 4 bits of address are
+	   8 or 0xc) and we have had a not-taken conditional branch
+	   to the address following the rfi. */
+	beqlr-
+#endif
+#ifndef CONFIG_PTE_64BIT
+	rlwimi	r8,r4,22,20,29		/* insert next 10 bits of address */
+#else
+	rlwimi	r8,r4,23,20,28		/* compute pte address */
+	/*
+	 * If PTE_64BIT is set, the low word is the flags word; use that
+	 * word for locking since it contains all the interesting bits.
+	 */
+	addi	r8,r8,PTE_FLAGS_OFFSET
+#endif
+
+	/*
+	 * Update the linux PTE atomically.  We do the lwarx up-front
+	 * because almost always, there won't be a permission violation
+	 * and there won't already be an HPTE, and thus we will have
+	 * to update the PTE to set _PAGE_HASHPTE.  -- paulus.
+	 */
+.Lretry:
+	lwarx	r6,0,r8			/* get linux-style pte, flag word */
+#ifdef CONFIG_PPC_KUAP
+	mfsrin	r5,r4
+	rlwinm	r0,r9,28,_PAGE_RW	/* MSR[PR] => _PAGE_RW */
+	rlwinm	r5,r5,12,_PAGE_RW	/* Ks => _PAGE_RW */
+	andc	r5,r5,r0		/* Ks & ~MSR[PR] */
+	andc	r5,r6,r5		/* Clear _PAGE_RW when Ks = 1 && MSR[PR] = 0 */
+	andc.	r5,r3,r5		/* check access & ~permission */
+#else
+	andc.	r5,r3,r6		/* check access & ~permission */
+#endif
+	rlwinm	r0,r3,32-3,24,24	/* _PAGE_RW access -> _PAGE_DIRTY */
+	ori	r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
+#ifdef CONFIG_SMP
+	bne-	.Lhash_page_out		/* return if access not permitted */
+#else
+	bnelr-
+#endif
+	or	r5,r0,r6		/* set accessed/dirty bits */
+#ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_SMP
+	subf	r10,r6,r8		/* create false data dependency */
+	subi	r10,r10,PTE_FLAGS_OFFSET
+	lwzx	r10,r6,r10		/* Get upper PTE word */
+#else
+	lwz	r10,-PTE_FLAGS_OFFSET(r8)
+#endif /* CONFIG_SMP */
+#endif /* CONFIG_PTE_64BIT */
+	stwcx.	r5,0,r8			/* attempt to update PTE */
+	bne-	.Lretry			/* retry if someone got there first */
+
+	mfsrin	r3,r4			/* get segment reg for segment */
+	bl	create_hpte		/* add the hash table entry */
+
+#ifdef CONFIG_SMP
+	eieio
+	lis	r8, (mmu_hash_lock - PAGE_OFFSET)@ha
+	li	r0,0
+	stw	r0, (mmu_hash_lock - PAGE_OFFSET)@l(r8)
+#endif
+	b	fast_hash_page_return
+
+#ifdef CONFIG_SMP
+.Lhash_page_out:
+	eieio
+	lis	r8, (mmu_hash_lock - PAGE_OFFSET)@ha
+	li	r0,0
+	stw	r0, (mmu_hash_lock - PAGE_OFFSET)@l(r8)
+	blr
+#endif /* CONFIG_SMP */
+_ASM_NOKPROBE_SYMBOL(hash_page)
+
+/*
+ * Add an entry for a particular page to the hash table.
+ *
+ * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval)
+ *
+ * We assume any necessary modifications to the pte (e.g. setting
+ * the accessed bit) have already been done and that there is actually
+ * a hash table in use (i.e. we're not on a 603).
+ */
+_GLOBAL(add_hash_page)
+	mflr	r0
+	stw	r0,4(r1)
+
+#ifdef CONFIG_SMP
+	lwz	r8,TASK_CPU(r2)		/* to go in mmu_hash_lock */
+	oris	r8,r8,12
+#endif /* CONFIG_SMP */
+
+	/*
+	 * We disable interrupts here, even on UP, because we don't
+	 * want to race with hash_page, and because we want the
+	 * _PAGE_HASHPTE bit to be a reliable indication of whether
+	 * the HPTE exists (or at least whether one did once).
+	 * We also turn off the MMU for data accesses so that we
+	 * we can't take a hash table miss (assuming the code is
+	 * covered by a BAT).  -- paulus
+	 */
+	mfmsr	r9
+	rlwinm	r0,r9,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
+	mtmsr	r0
+	isync
+
+#ifdef CONFIG_SMP
+	lis	r6, (mmu_hash_lock - PAGE_OFFSET)@ha
+	addi	r6, r6, (mmu_hash_lock - PAGE_OFFSET)@l
+10:	lwarx	r0,0,r6			/* take the mmu_hash_lock */
+	cmpi	0,r0,0
+	bne-	11f
+	stwcx.	r8,0,r6
+	beq+	12f
+11:	lwz	r0,0(r6)
+	cmpi	0,r0,0
+	beq	10b
+	b	11b
+12:	isync
+#endif
+
+	/*
+	 * Fetch the linux pte and test and set _PAGE_HASHPTE atomically.
+	 * If _PAGE_HASHPTE was already set, we don't replace the existing
+	 * HPTE, so we just unlock and return.
+	 */
+	mr	r8,r5
+#ifndef CONFIG_PTE_64BIT
+	rlwimi	r8,r4,22,20,29
+#else
+	rlwimi	r8,r4,23,20,28
+	addi	r8,r8,PTE_FLAGS_OFFSET
+#endif
+1:	lwarx	r6,0,r8
+	andi.	r0,r6,_PAGE_HASHPTE
+	bne	9f			/* if HASHPTE already set, done */
+#ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_SMP
+	subf	r10,r6,r8		/* create false data dependency */
+	subi	r10,r10,PTE_FLAGS_OFFSET
+	lwzx	r10,r6,r10		/* Get upper PTE word */
+#else
+	lwz	r10,-PTE_FLAGS_OFFSET(r8)
+#endif /* CONFIG_SMP */
+#endif /* CONFIG_PTE_64BIT */
+	ori	r5,r6,_PAGE_HASHPTE
+	stwcx.	r5,0,r8
+	bne-	1b
+
+	/* Convert context and va to VSID */
+	mulli	r3,r3,897*16		/* multiply context by context skew */
+	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
+	mulli	r0,r0,0x111		/* multiply by ESID skew */
+	add	r3,r3,r0		/* note create_hpte trims to 24 bits */
+
+	bl	create_hpte
+
+9:
+#ifdef CONFIG_SMP
+	lis	r6, (mmu_hash_lock - PAGE_OFFSET)@ha
+	addi	r6, r6, (mmu_hash_lock - PAGE_OFFSET)@l
+	eieio
+	li	r0,0
+	stw	r0,0(r6)		/* clear mmu_hash_lock */
+#endif
+
+	/* reenable interrupts and DR */
+	mtmsr	r9
+	isync
+
+	lwz	r0,4(r1)
+	mtlr	r0
+	blr
+_ASM_NOKPROBE_SYMBOL(add_hash_page)
+
+/*
+ * This routine adds a hardware PTE to the hash table.
+ * It is designed to be called with the MMU either on or off.
+ * r3 contains the VSID, r4 contains the virtual address,
+ * r5 contains the linux PTE, r6 contains the old value of the
+ * linux PTE (before setting _PAGE_HASHPTE). r10 contains the
+ * upper half of the PTE if CONFIG_PTE_64BIT.
+ * On SMP, the caller should have the mmu_hash_lock held.
+ * We assume that the caller has (or will) set the _PAGE_HASHPTE
+ * bit in the linux PTE in memory.  The value passed in r6 should
+ * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set
+ * this routine will skip the search for an existing HPTE.
+ * This procedure modifies r0, r3 - r6, r8, cr0.
+ *  -- paulus.
+ *
+ * For speed, 4 of the instructions get patched once the size and
+ * physical address of the hash table are known.  These definitions
+ * of Hash_base and Hash_bits below are for the early hash table.
+ */
+Hash_base = early_hash
+Hash_bits = 12				/* e.g. 256kB hash table */
+Hash_msk = (((1 << Hash_bits) - 1) * 64)
+
+/* defines for the PTE format for 32-bit PPCs */
+#define HPTE_SIZE	8
+#define PTEG_SIZE	64
+#define LG_PTEG_SIZE	6
+#define LDPTEu		lwzu
+#define LDPTE		lwz
+#define STPTE		stw
+#define CMPPTE		cmpw
+#define PTE_H		0x40
+#define PTE_V		0x80000000
+#define TST_V(r)	rlwinm. r,r,0,0,0
+#define SET_V(r)	oris r,r,PTE_V@h
+#define CLR_V(r,t)	rlwinm r,r,0,1,31
+
+#define HASH_LEFT	31-(LG_PTEG_SIZE+Hash_bits-1)
+#define HASH_RIGHT	31-LG_PTEG_SIZE
+
+__REF
+_GLOBAL(create_hpte)
+	/* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
+	rlwinm	r8,r5,32-9,30,30	/* _PAGE_RW -> PP msb */
+	rlwinm	r0,r5,32-6,30,30	/* _PAGE_DIRTY -> PP msb */
+	and	r8,r8,r0		/* writable if _RW & _DIRTY */
+	rlwimi	r5,r5,32-1,30,30	/* _PAGE_USER -> PP msb */
+	rlwimi	r5,r5,32-2,31,31	/* _PAGE_USER -> PP lsb */
+	ori	r8,r8,0xe04		/* clear out reserved bits */
+	andc	r8,r5,r8		/* PP = user? (rw&dirty? 1: 3): 0 */
+BEGIN_FTR_SECTION
+	rlwinm	r8,r8,0,~_PAGE_COHERENT	/* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
+#ifdef CONFIG_PTE_64BIT
+	/* Put the XPN bits into the PTE */
+	rlwimi	r8,r10,8,20,22
+	rlwimi	r8,r10,2,29,29
+#endif
+
+	/* Construct the high word of the PPC-style PTE (r5) */
+	rlwinm	r5,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
+	rlwimi	r5,r4,10,26,31		/* put in API (abbrev page index) */
+	SET_V(r5)			/* set V (valid) bit */
+
+	patch_site	0f, patch__hash_page_A0
+	patch_site	1f, patch__hash_page_A1
+	patch_site	2f, patch__hash_page_A2
+	/* Get the address of the primary PTE group in the hash table (r3) */
+0:	lis	r0, (Hash_base - PAGE_OFFSET)@h	/* base address of hash table */
+1:	rlwimi	r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
+2:	rlwinm	r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
+	xor	r3,r3,r0		/* make primary hash */
+	li	r0,8			/* PTEs/group */
+
+	/*
+	 * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search
+	 * if it is clear, meaning that the HPTE isn't there already...
+	 */
+	andi.	r6,r6,_PAGE_HASHPTE
+	beq+	10f			/* no PTE: go look for an empty slot */
+	tlbie	r4
+
+	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
+	mtctr	r0
+	addi	r4,r3,-HPTE_SIZE
+1:	LDPTEu	r6,HPTE_SIZE(r4)	/* get next PTE */
+	CMPPTE	0,r6,r5
+	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
+	beq+	.Lfound_slot
+
+	patch_site	0f, patch__hash_page_B
+	/* Search the secondary PTEG for a matching PTE */
+	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
+0:	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
+	xori	r4,r4,(-PTEG_SIZE & 0xffff)
+	addi	r4,r4,-HPTE_SIZE
+	mtctr	r0
+2:	LDPTEu	r6,HPTE_SIZE(r4)
+	CMPPTE	0,r6,r5
+	bdnzf	2,2b
+	beq+	.Lfound_slot
+	xori	r5,r5,PTE_H		/* clear H bit again */
+
+	/* Search the primary PTEG for an empty slot */
+10:	mtctr	r0
+	addi	r4,r3,-HPTE_SIZE	/* search primary PTEG */
+1:	LDPTEu	r6,HPTE_SIZE(r4)	/* get next PTE */
+	TST_V(r6)			/* test valid bit */
+	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
+	beq+	.Lfound_empty
+
+	patch_site	0f, patch__hash_page_C
+	/* Search the secondary PTEG for an empty slot */
+	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
+0:	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
+	xori	r4,r4,(-PTEG_SIZE & 0xffff)
+	addi	r4,r4,-HPTE_SIZE
+	mtctr	r0
+2:	LDPTEu	r6,HPTE_SIZE(r4)
+	TST_V(r6)
+	bdnzf	2,2b
+	beq+	.Lfound_empty
+	xori	r5,r5,PTE_H		/* clear H bit again */
+
+	/*
+	 * Choose an arbitrary slot in the primary PTEG to overwrite.
+	 * Since both the primary and secondary PTEGs are full, and we
+	 * have no information that the PTEs in the primary PTEG are
+	 * more important or useful than those in the secondary PTEG,
+	 * and we know there is a definite (although small) speed
+	 * advantage to putting the PTE in the primary PTEG, we always
+	 * put the PTE in the primary PTEG.
+	 */
+
+	lis	r4, (next_slot - PAGE_OFFSET)@ha	/* get next evict slot */
+	lwz	r6, (next_slot - PAGE_OFFSET)@l(r4)
+	addi	r6,r6,HPTE_SIZE			/* search for candidate */
+	andi.	r6,r6,7*HPTE_SIZE
+	stw	r6,next_slot@l(r4)
+	add	r4,r3,r6
+
+#ifndef CONFIG_SMP
+	/* Store PTE in PTEG */
+.Lfound_empty:
+	STPTE	r5,0(r4)
+.Lfound_slot:
+	STPTE	r8,HPTE_SIZE/2(r4)
+
+#else /* CONFIG_SMP */
+/*
+ * Between the tlbie above and updating the hash table entry below,
+ * another CPU could read the hash table entry and put it in its TLB.
+ * There are 3 cases:
+ * 1. using an empty slot
+ * 2. updating an earlier entry to change permissions (i.e. enable write)
+ * 3. taking over the PTE for an unrelated address
+ *
+ * In each case it doesn't really matter if the other CPUs have the old
+ * PTE in their TLB.  So we don't need to bother with another tlbie here,
+ * which is convenient as we've overwritten the register that had the
+ * address. :-)  The tlbie above is mainly to make sure that this CPU comes
+ * and gets the new PTE from the hash table.
+ *
+ * We do however have to make sure that the PTE is never in an invalid
+ * state with the V bit set.
+ */
+.Lfound_empty:
+.Lfound_slot:
+	CLR_V(r5,r0)		/* clear V (valid) bit in PTE */
+	STPTE	r5,0(r4)
+	sync
+	TLBSYNC
+	STPTE	r8,HPTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
+	sync
+	SET_V(r5)
+	STPTE	r5,0(r4)	/* finally set V bit in PTE */
+#endif /* CONFIG_SMP */
+
+	sync		/* make sure pte updates get to memory */
+	blr
+	.previous
+_ASM_NOKPROBE_SYMBOL(create_hpte)
+
+	.section .bss
+	.align	2
+next_slot:
+	.space	4
+	.previous
+
+/*
+ * Flush the entry for a particular page from the hash table.
+ *
+ * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval,
+ *		    int count)
+ *
+ * We assume that there is a hash table in use (Hash != 0).
+ */
+__REF
+_GLOBAL(flush_hash_pages)
+	/*
+	 * We disable interrupts here, even on UP, because we want
+	 * the _PAGE_HASHPTE bit to be a reliable indication of
+	 * whether the HPTE exists (or at least whether one did once).
+	 * We also turn off the MMU for data accesses so that we
+	 * we can't take a hash table miss (assuming the code is
+	 * covered by a BAT).  -- paulus
+	 */
+	mfmsr	r10
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
+	mtmsr	r0
+	isync
+
+	/* First find a PTE in the range that has _PAGE_HASHPTE set */
+#ifndef CONFIG_PTE_64BIT
+	rlwimi	r5,r4,22,20,29
+#else
+	rlwimi	r5,r4,23,20,28
+	addi	r5,r5,PTE_FLAGS_OFFSET
+#endif
+1:	lwz	r0,0(r5)
+	cmpwi	cr1,r6,1
+	andi.	r0,r0,_PAGE_HASHPTE
+	bne	2f
+	ble	cr1,19f
+	addi	r4,r4,0x1000
+	addi	r5,r5,PTE_T_SIZE
+	addi	r6,r6,-1
+	b	1b
+
+	/* Convert context and va to VSID */
+2:	mulli	r3,r3,897*16		/* multiply context by context skew */
+	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
+	mulli	r0,r0,0x111		/* multiply by ESID skew */
+	add	r3,r3,r0		/* note code below trims to 24 bits */
+
+	/* Construct the high word of the PPC-style PTE (r11) */
+	rlwinm	r11,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
+	rlwimi	r11,r4,10,26,31		/* put in API (abbrev page index) */
+	SET_V(r11)			/* set V (valid) bit */
+
+#ifdef CONFIG_SMP
+	lis	r9, (mmu_hash_lock - PAGE_OFFSET)@ha
+	addi	r9, r9, (mmu_hash_lock - PAGE_OFFSET)@l
+	tophys	(r8, r2)
+	lwz	r8, TASK_CPU(r8)
+	oris	r8,r8,9
+10:	lwarx	r0,0,r9
+	cmpi	0,r0,0
+	bne-	11f
+	stwcx.	r8,0,r9
+	beq+	12f
+11:	lwz	r0,0(r9)
+	cmpi	0,r0,0
+	beq	10b
+	b	11b
+12:	isync
+#endif
+
+	/*
+	 * Check the _PAGE_HASHPTE bit in the linux PTE.  If it is
+	 * already clear, we're done (for this pte).  If not,
+	 * clear it (atomically) and proceed.  -- paulus.
+	 */
+33:	lwarx	r8,0,r5			/* fetch the pte flags word */
+	andi.	r0,r8,_PAGE_HASHPTE
+	beq	8f			/* done if HASHPTE is already clear */
+	rlwinm	r8,r8,0,31,29		/* clear HASHPTE bit */
+	stwcx.	r8,0,r5			/* update the pte */
+	bne-	33b
+
+	patch_site	0f, patch__flush_hash_A0
+	patch_site	1f, patch__flush_hash_A1
+	patch_site	2f, patch__flush_hash_A2
+	/* Get the address of the primary PTE group in the hash table (r3) */
+0:	lis	r8, (Hash_base - PAGE_OFFSET)@h	/* base address of hash table */
+1:	rlwimi	r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
+2:	rlwinm	r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
+	xor	r8,r0,r8		/* make primary hash */
+
+	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
+	li	r0,8			/* PTEs/group */
+	mtctr	r0
+	addi	r12,r8,-HPTE_SIZE
+1:	LDPTEu	r0,HPTE_SIZE(r12)	/* get next PTE */
+	CMPPTE	0,r0,r11
+	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
+	beq+	3f
+
+	patch_site	0f, patch__flush_hash_B
+	/* Search the secondary PTEG for a matching PTE */
+	ori	r11,r11,PTE_H		/* set H (secondary hash) bit */
+	li	r0,8			/* PTEs/group */
+0:	xoris	r12,r8,Hash_msk>>16	/* compute secondary hash */
+	xori	r12,r12,(-PTEG_SIZE & 0xffff)
+	addi	r12,r12,-HPTE_SIZE
+	mtctr	r0
+2:	LDPTEu	r0,HPTE_SIZE(r12)
+	CMPPTE	0,r0,r11
+	bdnzf	2,2b
+	xori	r11,r11,PTE_H		/* clear H again */
+	bne-	4f			/* should rarely fail to find it */
+
+3:	li	r0,0
+	STPTE	r0,0(r12)		/* invalidate entry */
+4:	sync
+	tlbie	r4			/* in hw tlb too */
+	sync
+
+8:	ble	cr1,9f			/* if all ptes checked */
+81:	addi	r6,r6,-1
+	addi	r5,r5,PTE_T_SIZE
+	addi	r4,r4,0x1000
+	lwz	r0,0(r5)		/* check next pte */
+	cmpwi	cr1,r6,1
+	andi.	r0,r0,_PAGE_HASHPTE
+	bne	33b
+	bgt	cr1,81b
+
+9:
+#ifdef CONFIG_SMP
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+#endif
+
+19:	mtmsr	r10
+	isync
+	blr
+	.previous
+EXPORT_SYMBOL(flush_hash_pages)
+_ASM_NOKPROBE_SYMBOL(flush_hash_pages)
diff --git a/arch/powerpc/mm/book3s32/kuap.c b/arch/powerpc/mm/book3s32/kuap.c
new file mode 100644
index 000000000..28676cabb
--- /dev/null
+++ b/arch/powerpc/mm/book3s32/kuap.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <asm/kup.h>
+#include <asm/smp.h>
+
+struct static_key_false disable_kuap_key;
+EXPORT_SYMBOL(disable_kuap_key);
+
+void kuap_lock_all_ool(void)
+{
+	kuap_lock_all();
+}
+EXPORT_SYMBOL(kuap_lock_all_ool);
+
+void kuap_unlock_all_ool(void)
+{
+	kuap_unlock_all();
+}
+EXPORT_SYMBOL(kuap_unlock_all_ool);
+
+void setup_kuap(bool disabled)
+{
+	if (!disabled) {
+		kuap_lock_all_ool();
+		init_mm.context.sr0 |= SR_KS;
+		current->thread.sr0 |= SR_KS;
+	}
+
+	if (smp_processor_id() != boot_cpuid)
+		return;
+
+	if (disabled)
+		static_branch_enable(&disable_kuap_key);
+	else
+		pr_info("Activating Kernel Userspace Access Protection\n");
+}
diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
new file mode 100644
index 000000000..850783cfa
--- /dev/null
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU substantially follows the
+ * architecture specification.  This includes the 6xx, 7xx, 7xxx,
+ * and 8260 implementations but excludes the 8xx and 4xx.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <linux/memblock.h>
+
+#include <asm/mmu.h>
+#include <asm/machdep.h>
+#include <asm/code-patching.h>
+#include <asm/sections.h>
+
+#include <mm/mmu_decl.h>
+
+u8 __initdata early_hash[SZ_256K] __aligned(SZ_256K) = {0};
+
+static struct hash_pte __initdata *Hash = (struct hash_pte *)early_hash;
+static unsigned long __initdata Hash_size, Hash_mask;
+static unsigned int __initdata hash_mb, hash_mb2;
+unsigned long __initdata _SDR1;
+
+struct ppc_bat BATS[8][2];	/* 8 pairs of IBAT, DBAT */
+
+static struct batrange {	/* stores address ranges mapped by BATs */
+	unsigned long start;
+	unsigned long limit;
+	phys_addr_t phys;
+} bat_addrs[8];
+
+#ifdef CONFIG_SMP
+unsigned long mmu_hash_lock;
+#endif
+
+/*
+ * Return PA for this VA if it is mapped by a BAT, or 0
+ */
+phys_addr_t v_block_mapped(unsigned long va)
+{
+	int b;
+	for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b)
+		if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
+			return bat_addrs[b].phys + (va - bat_addrs[b].start);
+	return 0;
+}
+
+/*
+ * Return VA for a given PA or 0 if not mapped
+ */
+unsigned long p_block_mapped(phys_addr_t pa)
+{
+	int b;
+	for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b)
+		if (pa >= bat_addrs[b].phys
+	    	    && pa < (bat_addrs[b].limit-bat_addrs[b].start)
+		              +bat_addrs[b].phys)
+			return bat_addrs[b].start+(pa-bat_addrs[b].phys);
+	return 0;
+}
+
+int __init find_free_bat(void)
+{
+	int b;
+	int n = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4;
+
+	for (b = 0; b < n; b++) {
+		struct ppc_bat *bat = BATS[b];
+
+		if (!(bat[1].batu & 3))
+			return b;
+	}
+	return -1;
+}
+
+/*
+ * This function calculates the size of the larger block usable to map the
+ * beginning of an area based on the start address and size of that area:
+ * - max block size is 256 on 6xx.
+ * - base address must be aligned to the block size. So the maximum block size
+ *   is identified by the lowest bit set to 1 in the base address (for instance
+ *   if base is 0x16000000, max size is 0x02000000).
+ * - block size has to be a power of two. This is calculated by finding the
+ *   highest bit set to 1.
+ */
+unsigned int bat_block_size(unsigned long base, unsigned long top)
+{
+	unsigned int max_size = SZ_256M;
+	unsigned int base_shift = (ffs(base) - 1) & 31;
+	unsigned int block_shift = (fls(top - base) - 1) & 31;
+
+	return min3(max_size, 1U << base_shift, 1U << block_shift);
+}
+
+/*
+ * Set up one of the IBAT (block address translation) register pairs.
+ * The parameters are not checked; in particular size must be a power
+ * of 2 between 128k and 256M.
+ */
+static void setibat(int index, unsigned long virt, phys_addr_t phys,
+		    unsigned int size, pgprot_t prot)
+{
+	unsigned int bl = (size >> 17) - 1;
+	int wimgxpp;
+	struct ppc_bat *bat = BATS[index];
+	unsigned long flags = pgprot_val(prot);
+
+	if (!cpu_has_feature(CPU_FTR_NEED_COHERENT))
+		flags &= ~_PAGE_COHERENT;
+
+	wimgxpp = (flags & _PAGE_COHERENT) | (_PAGE_EXEC ? BPP_RX : BPP_XX);
+	bat[0].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
+	bat[0].batl = BAT_PHYS_ADDR(phys) | wimgxpp;
+	if (flags & _PAGE_USER)
+		bat[0].batu |= 1;	/* Vp = 1 */
+}
+
+static void clearibat(int index)
+{
+	struct ppc_bat *bat = BATS[index];
+
+	bat[0].batu = 0;
+	bat[0].batl = 0;
+}
+
+static unsigned long __init __mmu_mapin_ram(unsigned long base, unsigned long top)
+{
+	int idx;
+
+	while ((idx = find_free_bat()) != -1 && base != top) {
+		unsigned int size = bat_block_size(base, top);
+
+		if (size < 128 << 10)
+			break;
+		setbat(idx, PAGE_OFFSET + base, base, size, PAGE_KERNEL_X);
+		base += size;
+	}
+
+	return base;
+}
+
+unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
+{
+	unsigned long done;
+	unsigned long border = (unsigned long)__srwx_boundary - PAGE_OFFSET;
+	unsigned long size;
+
+	size = roundup_pow_of_two((unsigned long)_einittext - PAGE_OFFSET);
+	setibat(0, PAGE_OFFSET, 0, size, PAGE_KERNEL_X);
+
+	if (debug_pagealloc_enabled_or_kfence()) {
+		pr_debug_once("Read-Write memory mapped without BATs\n");
+		if (base >= border)
+			return base;
+		if (top >= border)
+			top = border;
+	}
+
+	if (!strict_kernel_rwx_enabled() || base >= border || top <= border)
+		return __mmu_mapin_ram(base, top);
+
+	done = __mmu_mapin_ram(base, border);
+	if (done != border)
+		return done;
+
+	return __mmu_mapin_ram(border, top);
+}
+
+static bool is_module_segment(unsigned long addr)
+{
+	if (!IS_ENABLED(CONFIG_MODULES))
+		return false;
+	if (addr < ALIGN_DOWN(MODULES_VADDR, SZ_256M))
+		return false;
+	if (addr > ALIGN(MODULES_END, SZ_256M) - 1)
+		return false;
+	return true;
+}
+
+void mmu_mark_initmem_nx(void)
+{
+	int nb = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4;
+	int i;
+	unsigned long base = (unsigned long)_stext - PAGE_OFFSET;
+	unsigned long top = ALIGN((unsigned long)_etext - PAGE_OFFSET, SZ_128K);
+	unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET;
+	unsigned long size;
+
+	for (i = 0; i < nb - 1 && base < top;) {
+		size = bat_block_size(base, top);
+		setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT);
+		base += size;
+	}
+	if (base < top) {
+		size = bat_block_size(base, top);
+		if ((top - base) > size) {
+			size <<= 1;
+			if (strict_kernel_rwx_enabled() && base + size > border)
+				pr_warn("Some RW data is getting mapped X. "
+					"Adjust CONFIG_DATA_SHIFT to avoid that.\n");
+		}
+		setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT);
+		base += size;
+	}
+	for (; i < nb; i++)
+		clearibat(i);
+
+	update_bats();
+
+	for (i = TASK_SIZE >> 28; i < 16; i++) {
+		/* Do not set NX on VM space for modules */
+		if (is_module_segment(i << 28))
+			continue;
+
+		mtsr(mfsr(i << 28) | 0x10000000, i << 28);
+	}
+}
+
+void mmu_mark_rodata_ro(void)
+{
+	int nb = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4;
+	int i;
+
+	for (i = 0; i < nb; i++) {
+		struct ppc_bat *bat = BATS[i];
+
+		if (bat_addrs[i].start < (unsigned long)__end_rodata)
+			bat[1].batl = (bat[1].batl & ~BPP_RW) | BPP_RX;
+	}
+
+	update_bats();
+}
+
+/*
+ * Set up one of the D BAT (block address translation) register pairs.
+ * The parameters are not checked; in particular size must be a power
+ * of 2 between 128k and 256M.
+ */
+void __init setbat(int index, unsigned long virt, phys_addr_t phys,
+		   unsigned int size, pgprot_t prot)
+{
+	unsigned int bl;
+	int wimgxpp;
+	struct ppc_bat *bat;
+	unsigned long flags = pgprot_val(prot);
+
+	if (index == -1)
+		index = find_free_bat();
+	if (index == -1) {
+		pr_err("%s: no BAT available for mapping 0x%llx\n", __func__,
+		       (unsigned long long)phys);
+		return;
+	}
+	bat = BATS[index];
+
+	if ((flags & _PAGE_NO_CACHE) ||
+	    (cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0))
+		flags &= ~_PAGE_COHERENT;
+
+	bl = (size >> 17) - 1;
+	/* Do DBAT first */
+	wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
+			   | _PAGE_COHERENT | _PAGE_GUARDED);
+	wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
+	bat[1].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
+	bat[1].batl = BAT_PHYS_ADDR(phys) | wimgxpp;
+	if (flags & _PAGE_USER)
+		bat[1].batu |= 1; 	/* Vp = 1 */
+	if (flags & _PAGE_GUARDED) {
+		/* G bit must be zero in IBATs */
+		flags &= ~_PAGE_EXEC;
+	}
+
+	bat_addrs[index].start = virt;
+	bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1;
+	bat_addrs[index].phys = phys;
+}
+
+/*
+ * Preload a translation in the hash table
+ */
+static void hash_preload(struct mm_struct *mm, unsigned long ea)
+{
+	pmd_t *pmd;
+
+	if (!mmu_has_feature(MMU_FTR_HPTE_TABLE))
+		return;
+	pmd = pmd_off(mm, ea);
+	if (!pmd_none(*pmd))
+		add_hash_page(mm->context.id, ea, pmd_val(*pmd));
+}
+
+/*
+ * This is called at the end of handling a user page fault, when the
+ * fault has been handled by updating a PTE in the linux page tables.
+ * We use it to preload an HPTE into the hash table corresponding to
+ * the updated linux PTE.
+ *
+ * This must always be called with the pte lock held.
+ */
+void __update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
+		      pte_t *ptep)
+{
+	/*
+	 * We don't need to worry about _PAGE_PRESENT here because we are
+	 * called with either mm->page_table_lock held or ptl lock held
+	 */
+
+	/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
+	if (!pte_young(*ptep) || address >= TASK_SIZE)
+		return;
+
+	/* We have to test for regs NULL since init will get here first thing at boot */
+	if (!current->thread.regs)
+		return;
+
+	/* We also avoid filling the hash if not coming from a fault */
+	if (TRAP(current->thread.regs) != 0x300 && TRAP(current->thread.regs) != 0x400)
+		return;
+
+	hash_preload(vma->vm_mm, address);
+}
+
+/*
+ * Initialize the hash table and patch the instructions in hashtable.S.
+ */
+void __init MMU_init_hw(void)
+{
+	unsigned int n_hpteg, lg_n_hpteg;
+
+	if (!mmu_has_feature(MMU_FTR_HPTE_TABLE))
+		return;
+
+	if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
+
+#define LG_HPTEG_SIZE	6		/* 64 bytes per HPTEG */
+#define SDR1_LOW_BITS	((n_hpteg - 1) >> 10)
+#define MIN_N_HPTEG	1024		/* min 64kB hash table */
+
+	/*
+	 * Allow 1 HPTE (1/8 HPTEG) for each page of memory.
+	 * This is less than the recommended amount, but then
+	 * Linux ain't AIX.
+	 */
+	n_hpteg = total_memory / (PAGE_SIZE * 8);
+	if (n_hpteg < MIN_N_HPTEG)
+		n_hpteg = MIN_N_HPTEG;
+	lg_n_hpteg = __ilog2(n_hpteg);
+	if (n_hpteg & (n_hpteg - 1)) {
+		++lg_n_hpteg;		/* round up if not power of 2 */
+		n_hpteg = 1 << lg_n_hpteg;
+	}
+	Hash_size = n_hpteg << LG_HPTEG_SIZE;
+
+	/*
+	 * Find some memory for the hash table.
+	 */
+	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
+	Hash = memblock_alloc(Hash_size, Hash_size);
+	if (!Hash)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
+		      __func__, Hash_size, Hash_size);
+	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
+
+	pr_info("Total memory = %lldMB; using %ldkB for hash table\n",
+		(unsigned long long)(total_memory >> 20), Hash_size >> 10);
+
+
+	Hash_mask = n_hpteg - 1;
+	hash_mb2 = hash_mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
+	if (lg_n_hpteg > 16)
+		hash_mb2 = 16 - LG_HPTEG_SIZE;
+}
+
+void __init MMU_init_hw_patch(void)
+{
+	unsigned int hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
+	unsigned int hash = (unsigned int)Hash - PAGE_OFFSET;
+
+	if (!mmu_has_feature(MMU_FTR_HPTE_TABLE))
+		return;
+
+	if (ppc_md.progress)
+		ppc_md.progress("hash:patch", 0x345);
+	if (ppc_md.progress)
+		ppc_md.progress("hash:done", 0x205);
+
+	/* WARNING: Make sure nothing can trigger a KASAN check past this point */
+
+	/*
+	 * Patch up the instructions in hashtable.S:create_hpte
+	 */
+	modify_instruction_site(&patch__hash_page_A0, 0xffff, hash >> 16);
+	modify_instruction_site(&patch__hash_page_A1, 0x7c0, hash_mb << 6);
+	modify_instruction_site(&patch__hash_page_A2, 0x7c0, hash_mb2 << 6);
+	modify_instruction_site(&patch__hash_page_B, 0xffff, hmask);
+	modify_instruction_site(&patch__hash_page_C, 0xffff, hmask);
+
+	/*
+	 * Patch up the instructions in hashtable.S:flush_hash_page
+	 */
+	modify_instruction_site(&patch__flush_hash_A0, 0xffff, hash >> 16);
+	modify_instruction_site(&patch__flush_hash_A1, 0x7c0, hash_mb << 6);
+	modify_instruction_site(&patch__flush_hash_A2, 0x7c0, hash_mb2 << 6);
+	modify_instruction_site(&patch__flush_hash_B, 0xffff, hmask);
+}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+				phys_addr_t first_memblock_size)
+{
+	/* We don't currently support the first MEMBLOCK not mapping 0
+	 * physical on those processors
+	 */
+	BUG_ON(first_memblock_base != 0);
+
+	memblock_set_current_limit(min_t(u64, first_memblock_size, SZ_256M));
+}
+
+void __init print_system_hash_info(void)
+{
+	pr_info("Hash_size         = 0x%lx\n", Hash_size);
+	if (Hash_mask)
+		pr_info("Hash_mask         = 0x%lx\n", Hash_mask);
+}
+
+void __init early_init_mmu(void)
+{
+}
diff --git a/arch/powerpc/mm/book3s32/mmu_context.c b/arch/powerpc/mm/book3s32/mmu_context.c
new file mode 100644
index 000000000..269a3eb25
--- /dev/null
+++ b/arch/powerpc/mm/book3s32/mmu_context.c
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU substantially follows the
+ * architecture specification.  This includes the 6xx, 7xx, 7xxx,
+ * and 8260 implementations but excludes the 8xx and 4xx.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/export.h>
+
+#include <asm/mmu_context.h>
+
+/*
+ * Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+void *abatron_pteptrs[2];
+
+/*
+ * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
+ * (virtual segment identifiers) for each context.  Although the
+ * hardware supports 24-bit VSIDs, and thus >1 million contexts,
+ * we only use 32,768 of them.  That is ample, since there can be
+ * at most around 30,000 tasks in the system anyway, and it means
+ * that we can use a bitmap to indicate which contexts are in use.
+ * Using a bitmap means that we entirely avoid all of the problems
+ * that we used to have when the context number overflowed,
+ * particularly on SMP systems.
+ *  -- paulus.
+ */
+#define NO_CONTEXT      	((unsigned long) -1)
+#define LAST_CONTEXT    	32767
+#define FIRST_CONTEXT    	1
+
+static unsigned long next_mmu_context;
+static unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+
+unsigned long __init_new_context(void)
+{
+	unsigned long ctx = next_mmu_context;
+
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+
+	return ctx;
+}
+EXPORT_SYMBOL_GPL(__init_new_context);
+
+/*
+ * Set up the context for a new address space.
+ */
+int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+	mm->context.id = __init_new_context();
+	mm->context.sr0 = CTX_TO_VSID(mm->context.id, 0);
+
+	if (!kuep_is_disabled())
+		mm->context.sr0 |= SR_NX;
+	if (!kuap_is_disabled())
+		mm->context.sr0 |= SR_KS;
+
+	return 0;
+}
+
+/*
+ * Free a context ID. Make sure to call this with preempt disabled!
+ */
+void __destroy_context(unsigned long ctx)
+{
+	clear_bit(ctx, context_map);
+}
+EXPORT_SYMBOL_GPL(__destroy_context);
+
+/*
+ * We're finished using the context for an address space.
+ */
+void destroy_context(struct mm_struct *mm)
+{
+	preempt_disable();
+	if (mm->context.id != NO_CONTEXT) {
+		__destroy_context(mm->context.id);
+		mm->context.id = NO_CONTEXT;
+	}
+	preempt_enable();
+}
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+	/* Reserve context 0 for kernel use */
+	context_map[0] = (1 << FIRST_CONTEXT) - 1;
+	next_mmu_context = FIRST_CONTEXT;
+}
+
+void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+	long id = next->context.id;
+
+	if (id < 0)
+		panic("mm_struct %p has no context ID", next);
+
+	isync();
+
+	update_user_segments(next->context.sr0);
+
+	if (IS_ENABLED(CONFIG_BDI_SWITCH))
+		abatron_pteptrs[1] = next->pgd;
+
+	if (!mmu_has_feature(MMU_FTR_HPTE_TABLE))
+		mtspr(SPRN_SDR1, rol32(__pa(next->pgd), 4) & 0xffff01ff);
+
+	mb();	/* sync */
+	isync();
+}
+EXPORT_SYMBOL(switch_mmu_context);
diff --git a/arch/powerpc/mm/book3s32/nohash_low.S b/arch/powerpc/mm/book3s32/nohash_low.S
new file mode 100644
index 000000000..19f418b0e
--- /dev/null
+++ b/arch/powerpc/mm/book3s32/nohash_low.S
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  This file contains low-level assembler routines for managing
+ *  the PowerPC 603 tlb invalidation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Flush an entry from the TLB
+ */
+#ifdef CONFIG_SMP
+_GLOBAL(_tlbie)
+	lwz	r8,TASK_CPU(r2)
+	oris	r8,r8,11
+	mfmsr	r10
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear DR */
+	mtmsr	r0
+	isync
+	lis	r9,mmu_hash_lock@h
+	ori	r9,r9,mmu_hash_lock@l
+	tophys(r9,r9)
+10:	lwarx	r7,0,r9
+	cmpwi	0,r7,0
+	bne-	10b
+	stwcx.	r8,0,r9
+	bne-	10b
+	eieio
+	tlbie	r3
+	sync
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+	mtmsr	r10
+	isync
+	blr
+_ASM_NOKPROBE_SYMBOL(_tlbie)
+#endif /* CONFIG_SMP */
+
+/*
+ * Flush the entire TLB. 603/603e only
+ */
+_GLOBAL(_tlbia)
+#if defined(CONFIG_SMP)
+	lwz	r8,TASK_CPU(r2)
+	oris	r8,r8,10
+	mfmsr	r10
+	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
+	rlwinm	r0,r0,0,28,26		/* clear DR */
+	mtmsr	r0
+	isync
+	lis	r9,mmu_hash_lock@h
+	ori	r9,r9,mmu_hash_lock@l
+	tophys(r9,r9)
+10:	lwarx	r7,0,r9
+	cmpwi	0,r7,0
+	bne-	10b
+	stwcx.	r8,0,r9
+	bne-	10b
+#endif /* CONFIG_SMP */
+	li	r5, 32
+	lis	r4, KERNELBASE@h
+	mtctr	r5
+	sync
+0:	tlbie	r4
+	addi	r4, r4, 0x1000
+	bdnz	0b
+	sync
+#ifdef CONFIG_SMP
+	TLBSYNC
+	li	r0,0
+	stw	r0,0(r9)		/* clear mmu_hash_lock */
+	mtmsr	r10
+	isync
+#endif /* CONFIG_SMP */
+	blr
+_ASM_NOKPROBE_SYMBOL(_tlbia)
diff --git a/arch/powerpc/mm/book3s32/tlb.c b/arch/powerpc/mm/book3s32/tlb.c
new file mode 100644
index 000000000..9ad6b56bf
--- /dev/null
+++ b/arch/powerpc/mm/book3s32/tlb.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This file contains the routines for TLB flushing.
+ * On machines where the MMU uses a hash table to store virtual to
+ * physical translations, these routines flush entries from the
+ * hash table also.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/export.h>
+
+#include <asm/tlbflush.h>
+#include <asm/tlb.h>
+
+#include <mm/mmu_decl.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes kernel pages
+ *
+ * since the hardware hash table functions as an extension of the
+ * tlb as far as the linux tables are concerned, flush it too.
+ *    -- Cort
+ */
+
+/*
+ * For each address in the range, find the pte for the address
+ * and check _PAGE_HASHPTE bit; if it is set, find and destroy
+ * the corresponding HPTE.
+ */
+void hash__flush_range(struct mm_struct *mm, unsigned long start, unsigned long end)
+{
+	pmd_t *pmd;
+	unsigned long pmd_end;
+	int count;
+	unsigned int ctx = mm->context.id;
+
+	start &= PAGE_MASK;
+	if (start >= end)
+		return;
+	end = (end - 1) | ~PAGE_MASK;
+	pmd = pmd_off(mm, start);
+	for (;;) {
+		pmd_end = ((start + PGDIR_SIZE) & PGDIR_MASK) - 1;
+		if (pmd_end > end)
+			pmd_end = end;
+		if (!pmd_none(*pmd)) {
+			count = ((pmd_end - start) >> PAGE_SHIFT) + 1;
+			flush_hash_pages(ctx, start, pmd_val(*pmd), count);
+		}
+		if (pmd_end == end)
+			break;
+		start = pmd_end + 1;
+		++pmd;
+	}
+}
+EXPORT_SYMBOL(hash__flush_range);
+
+/*
+ * Flush all the (user) entries for the address space described by mm.
+ */
+void hash__flush_tlb_mm(struct mm_struct *mm)
+{
+	struct vm_area_struct *mp;
+	VMA_ITERATOR(vmi, mm, 0);
+
+	/*
+	 * It is safe to iterate the vmas when called from dup_mmap,
+	 * holding mmap_lock.  It would also be safe from unmap_region
+	 * or exit_mmap, but not from vmtruncate on SMP - but it seems
+	 * dup_mmap is the only SMP case which gets here.
+	 */
+	for_each_vma(vmi, mp)
+		hash__flush_range(mp->vm_mm, mp->vm_start, mp->vm_end);
+}
+EXPORT_SYMBOL(hash__flush_tlb_mm);
+
+void hash__flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	struct mm_struct *mm;
+	pmd_t *pmd;
+
+	mm = (vmaddr < TASK_SIZE)? vma->vm_mm: &init_mm;
+	pmd = pmd_off(mm, vmaddr);
+	if (!pmd_none(*pmd))
+		flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1);
+}
+EXPORT_SYMBOL(hash__flush_tlb_page);