Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 2803 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
new file mode 100644
index 000000000..deecede78
--- /dev/null
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+config PPC_MPC512x
+	bool "512x-based boards"
+	depends on PPC_BOOK3S_32
+	select COMMON_CLK
+	select FSL_SOC
+	select IPIC
+	select HAVE_PCI
+	select FSL_PCI if PCI
+	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
+	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
+
+config MPC512x_LPBFIFO
+	tristate "MPC512x LocalPlus Bus FIFO driver"
+	depends on PPC_MPC512x && MPC512X_DMA
+	help
+	  Enable support for Freescale MPC512x LocalPlus Bus FIFO (SCLPC).
+
+config MPC5121_ADS
+	bool "Freescale MPC5121E ADS"
+	depends on PPC_MPC512x
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC5121E ADS board.
+
+config MPC512x_GENERIC
+	bool "Generic support for simple MPC512x based boards"
+	depends on PPC_MPC512x
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for simple MPC512x based boards
+	  which do not need custom platform specific setup.
+
+	  Compatible boards include:  Protonic LVT base boards (ZANMCU
+	  and VICVT2), Freescale MPC5125 Tower system.
+
+config PDM360NG
+	bool "ifm PDM360NG board"
+	depends on PPC_MPC512x
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the PDM360NG board.
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
new file mode 100644
index 000000000..2daf22ee2
--- /dev/null
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Freescale PowerPC 512x linux kernel.
+#
+obj-$(CONFIG_COMMON_CLK)	+= clock-commonclk.o
+obj-y				+= mpc512x_shared.o
+obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
+obj-$(CONFIG_MPC512x_GENERIC)	+= mpc512x_generic.o
+obj-$(CONFIG_MPC512x_LPBFIFO)	+= mpc512x_lpbfifo.o
+obj-$(CONFIG_PDM360NG)		+= pdm360ng.o
diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c
new file mode 100644
index 000000000..079cb3627
--- /dev/null
+++ b/arch/powerpc/platforms/512x/clock-commonclk.c
@@ -0,0 +1,1224 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 DENX Software Engineering
+ *
+ * Gerhard Sittig, <gsi@denx.de>
+ *
+ * common clock driver support for the MPC512x platform
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/mpc5121.h>
+#include <dt-bindings/clock/mpc512x-clock.h>
+
+#include "mpc512x.h"		/* our public mpc5121_clk_init() API */
+
+/* helpers to keep the MCLK intermediates "somewhere" in our table */
+enum {
+	MCLK_IDX_MUX0,
+	MCLK_IDX_EN0,
+	MCLK_IDX_DIV0,
+	MCLK_MAX_IDX,
+};
+
+#define NR_PSCS			12
+#define NR_MSCANS		4
+#define NR_SPDIFS		1
+#define NR_OUTCLK		4
+#define NR_MCLKS		(NR_PSCS + NR_MSCANS + NR_SPDIFS + NR_OUTCLK)
+
+/* extend the public set of clocks by adding internal slots for management */
+enum {
+	/* arrange for adjacent numbers after the public set */
+	MPC512x_CLK_START_PRIVATE = MPC512x_CLK_LAST_PUBLIC,
+	/* clocks which aren't announced to the public */
+	MPC512x_CLK_DDR,
+	MPC512x_CLK_MEM,
+	MPC512x_CLK_IIM,
+	/* intermediates in div+gate combos or fractional dividers */
+	MPC512x_CLK_DDR_UG,
+	MPC512x_CLK_SDHC_x4,
+	MPC512x_CLK_SDHC_UG,
+	MPC512x_CLK_SDHC2_UG,
+	MPC512x_CLK_DIU_x4,
+	MPC512x_CLK_DIU_UG,
+	MPC512x_CLK_MBX_BUS_UG,
+	MPC512x_CLK_MBX_UG,
+	MPC512x_CLK_MBX_3D_UG,
+	MPC512x_CLK_PCI_UG,
+	MPC512x_CLK_NFC_UG,
+	MPC512x_CLK_LPC_UG,
+	MPC512x_CLK_SPDIF_TX_IN,
+	/* intermediates for the mux+gate+div+mux MCLK generation */
+	MPC512x_CLK_MCLKS_FIRST,
+	MPC512x_CLK_MCLKS_LAST = MPC512x_CLK_MCLKS_FIRST
+				+ NR_MCLKS * MCLK_MAX_IDX,
+	/* internal, symbolic spec for the number of slots */
+	MPC512x_CLK_LAST_PRIVATE,
+};
+
+/* data required for the OF clock provider registration */
+static struct clk *clks[MPC512x_CLK_LAST_PRIVATE];
+static struct clk_onecell_data clk_data;
+
+/* CCM register access */
+static struct mpc512x_ccm __iomem *clkregs;
+static DEFINE_SPINLOCK(clklock);
+
+/* SoC variants {{{ */
+
+/*
+ * tell SoC variants apart as they are rather similar yet not identical,
+ * cache the result in an enum to not repeatedly run the expensive OF test
+ *
+ * MPC5123 is an MPC5121 without the MBX graphics accelerator
+ *
+ * MPC5125 has many more differences: no MBX, no AXE, no VIU, no SPDIF,
+ * no PATA, no SATA, no PCI, two FECs (of different compatibility name),
+ * only 10 PSCs (of different compatibility name), two SDHCs, different
+ * NFC IP block, output clocks, system PLL status query, different CPMF
+ * interpretation, no CFM, different fourth PSC/CAN mux0 input -- yet
+ * those differences can get folded into this clock provider support
+ * code and don't warrant a separate highly redundant implementation
+ */
+
+static enum soc_type {
+	MPC512x_SOC_MPC5121,
+	MPC512x_SOC_MPC5123,
+	MPC512x_SOC_MPC5125,
+} soc;
+
+static void __init mpc512x_clk_determine_soc(void)
+{
+	if (of_machine_is_compatible("fsl,mpc5121")) {
+		soc = MPC512x_SOC_MPC5121;
+		return;
+	}
+	if (of_machine_is_compatible("fsl,mpc5123")) {
+		soc = MPC512x_SOC_MPC5123;
+		return;
+	}
+	if (of_machine_is_compatible("fsl,mpc5125")) {
+		soc = MPC512x_SOC_MPC5125;
+		return;
+	}
+}
+
+static bool __init soc_has_mbx(void)
+{
+	if (soc == MPC512x_SOC_MPC5121)
+		return true;
+	return false;
+}
+
+static bool __init soc_has_axe(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool __init soc_has_viu(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool __init soc_has_spdif(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool __init soc_has_pata(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool __init soc_has_sata(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool __init soc_has_pci(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return false;
+	return true;
+}
+
+static bool __init soc_has_fec2(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static int __init soc_max_pscnum(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return 10;
+	return 12;
+}
+
+static bool __init soc_has_sdhc2(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static bool __init soc_has_nfc_5125(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static bool __init soc_has_outclk(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static bool __init soc_has_cpmf_0_bypass(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+static bool __init soc_has_mclk_mux0_canin(void)
+{
+	if (soc == MPC512x_SOC_MPC5125)
+		return true;
+	return false;
+}
+
+/* }}} SoC variants */
+/* common clk API wrappers {{{ */
+
+/* convenience wrappers around the common clk API */
+static inline struct clk *mpc512x_clk_fixed(const char *name, int rate)
+{
+	return clk_register_fixed_rate(NULL, name, NULL, 0, rate);
+}
+
+static inline struct clk *mpc512x_clk_factor(
+	const char *name, const char *parent_name,
+	int mul, int div)
+{
+	int clkflags;
+
+	clkflags = CLK_SET_RATE_PARENT;
+	return clk_register_fixed_factor(NULL, name, parent_name, clkflags,
+					 mul, div);
+}
+
+static inline struct clk *mpc512x_clk_divider(
+	const char *name, const char *parent_name, u8 clkflags,
+	u32 __iomem *reg, u8 pos, u8 len, int divflags)
+{
+	divflags |= CLK_DIVIDER_BIG_ENDIAN;
+	return clk_register_divider(NULL, name, parent_name, clkflags,
+				    reg, pos, len, divflags, &clklock);
+}
+
+static inline struct clk *mpc512x_clk_divtable(
+	const char *name, const char *parent_name,
+	u32 __iomem *reg, u8 pos, u8 len,
+	const struct clk_div_table *divtab)
+{
+	u8 divflags;
+
+	divflags = CLK_DIVIDER_BIG_ENDIAN;
+	return clk_register_divider_table(NULL, name, parent_name, 0,
+					  reg, pos, len, divflags,
+					  divtab, &clklock);
+}
+
+static inline struct clk *mpc512x_clk_gated(
+	const char *name, const char *parent_name,
+	u32 __iomem *reg, u8 pos)
+{
+	int clkflags;
+	u8 gateflags;
+
+	clkflags = CLK_SET_RATE_PARENT;
+	gateflags = CLK_GATE_BIG_ENDIAN;
+	return clk_register_gate(NULL, name, parent_name, clkflags,
+				 reg, pos, gateflags, &clklock);
+}
+
+static inline struct clk *mpc512x_clk_muxed(const char *name,
+	const char **parent_names, int parent_count,
+	u32 __iomem *reg, u8 pos, u8 len)
+{
+	int clkflags;
+	u8 muxflags;
+
+	clkflags = CLK_SET_RATE_PARENT;
+	muxflags = CLK_MUX_BIG_ENDIAN;
+	return clk_register_mux(NULL, name,
+				parent_names, parent_count, clkflags,
+				reg, pos, len, muxflags, &clklock);
+}
+
+/* }}} common clk API wrappers */
+
+/* helper to isolate a bit field from a register */
+static inline int get_bit_field(uint32_t __iomem *reg, uint8_t pos, uint8_t len)
+{
+	uint32_t val;
+
+	val = in_be32(reg);
+	val >>= pos;
+	val &= (1 << len) - 1;
+	return val;
+}
+
+/* get the SPMF and translate it into the "sys pll" multiplier */
+static int __init get_spmf_mult(void)
+{
+	static int spmf_to_mult[] = {
+		68, 1, 12, 16, 20, 24, 28, 32,
+		36, 40, 44, 48, 52, 56, 60, 64,
+	};
+	int spmf;
+
+	spmf = get_bit_field(&clkregs->spmr, 24, 4);
+	return spmf_to_mult[spmf];
+}
+
+/*
+ * get the SYS_DIV value and translate it into a divide factor
+ *
+ * values returned from here are a multiple of the real factor since the
+ * divide ratio is fractional
+ */
+static int __init get_sys_div_x2(void)
+{
+	static int sysdiv_code_to_x2[] = {
+		4, 5, 6, 7, 8, 9, 10, 14,
+		12, 16, 18, 22, 20, 24, 26, 30,
+		28, 32, 34, 38, 36, 40, 42, 46,
+		44, 48, 50, 54, 52, 56, 58, 62,
+		60, 64, 66,
+	};
+	int divcode;
+
+	divcode = get_bit_field(&clkregs->scfr2, 26, 6);
+	return sysdiv_code_to_x2[divcode];
+}
+
+/*
+ * get the CPMF value and translate it into a multiplier factor
+ *
+ * values returned from here are a multiple of the real factor since the
+ * multiplier ratio is fractional
+ */
+static int __init get_cpmf_mult_x2(void)
+{
+	static int cpmf_to_mult_x36[] = {
+		/* 0b000 is "times 36" */
+		72, 2, 2, 3, 4, 5, 6, 7,
+	};
+	static int cpmf_to_mult_0by[] = {
+		/* 0b000 is "bypass" */
+		2, 2, 2, 3, 4, 5, 6, 7,
+	};
+
+	int *cpmf_to_mult;
+	int cpmf;
+
+	cpmf = get_bit_field(&clkregs->spmr, 16, 4);
+	if (soc_has_cpmf_0_bypass())
+		cpmf_to_mult = cpmf_to_mult_0by;
+	else
+		cpmf_to_mult = cpmf_to_mult_x36;
+	return cpmf_to_mult[cpmf];
+}
+
+/*
+ * some of the clock dividers do scale in a linear way, yet not all of
+ * their bit combinations are legal; use a divider table to get a
+ * resulting set of applicable divider values
+ */
+
+/* applies to the IPS_DIV, and PCI_DIV values */
+static const struct clk_div_table divtab_2346[] = {
+	{ .val = 2, .div = 2, },
+	{ .val = 3, .div = 3, },
+	{ .val = 4, .div = 4, },
+	{ .val = 6, .div = 6, },
+	{ .div = 0, },
+};
+
+/* applies to the MBX_DIV, LPC_DIV, and NFC_DIV values */
+static const struct clk_div_table divtab_1234[] = {
+	{ .val = 1, .div = 1, },
+	{ .val = 2, .div = 2, },
+	{ .val = 3, .div = 3, },
+	{ .val = 4, .div = 4, },
+	{ .div = 0, },
+};
+
+static int __init get_freq_from_dt(char *propname)
+{
+	struct device_node *np;
+	const unsigned int *prop;
+	int val;
+
+	val = 0;
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr");
+	if (np) {
+		prop = of_get_property(np, propname, NULL);
+		if (prop)
+			val = *prop;
+	    of_node_put(np);
+	}
+	return val;
+}
+
+static void __init mpc512x_clk_preset_data(void)
+{
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		clks[i] = ERR_PTR(-ENODEV);
+}
+
+/*
+ * - receives the "bus frequency" from the caller (that's the IPS clock
+ *   rate, the historical source of clock information)
+ * - fetches the system PLL multiplier and divider values as well as the
+ *   IPS divider value from hardware
+ * - determines the REF clock rate either from the XTAL/OSC spec (if
+ *   there is a device tree node describing the oscillator) or from the
+ *   IPS bus clock (supported for backwards compatibility, such that
+ *   setups without XTAL/OSC specs keep working)
+ * - creates the "ref" clock item in the clock tree, such that
+ *   subsequent code can create the remainder of the hierarchy (REF ->
+ *   SYS -> CSB -> IPS) from the REF clock rate and the returned mul/div
+ *   values
+ */
+static void __init mpc512x_clk_setup_ref_clock(struct device_node *np, int bus_freq,
+					int *sys_mul, int *sys_div,
+					int *ips_div)
+{
+	struct clk *osc_clk;
+	int calc_freq;
+
+	/* fetch mul/div factors from the hardware */
+	*sys_mul = get_spmf_mult();
+	*sys_mul *= 2;		/* compensate for the fractional divider */
+	*sys_div = get_sys_div_x2();
+	*ips_div = get_bit_field(&clkregs->scfr1, 23, 3);
+
+	/* lookup the oscillator clock for its rate */
+	osc_clk = of_clk_get_by_name(np, "osc");
+
+	/*
+	 * either descend from OSC to REF (and in bypassing verify the
+	 * IPS rate), or backtrack from IPS and multiplier values that
+	 * were fetched from hardware to REF and thus to the OSC value
+	 *
+	 * in either case the REF clock gets created here and the
+	 * remainder of the clock tree can get spanned from there
+	 */
+	if (!IS_ERR(osc_clk)) {
+		clks[MPC512x_CLK_REF] = mpc512x_clk_factor("ref", "osc", 1, 1);
+		calc_freq = clk_get_rate(clks[MPC512x_CLK_REF]);
+		calc_freq *= *sys_mul;
+		calc_freq /= *sys_div;
+		calc_freq /= 2;
+		calc_freq /= *ips_div;
+		if (bus_freq && calc_freq != bus_freq)
+			pr_warn("calc rate %d != OF spec %d\n",
+				calc_freq, bus_freq);
+	} else {
+		calc_freq = bus_freq;	/* start with IPS */
+		calc_freq *= *ips_div;	/* IPS -> CSB */
+		calc_freq *= 2;		/* CSB -> SYS */
+		calc_freq *= *sys_div;	/* SYS -> PLL out */
+		calc_freq /= *sys_mul;	/* PLL out -> REF == OSC */
+		clks[MPC512x_CLK_REF] = mpc512x_clk_fixed("ref", calc_freq);
+	}
+}
+
+/* MCLK helpers {{{ */
+
+/*
+ * helper code for the MCLK subtree setup
+ *
+ * the overview in section 5.2.4 of the MPC5121e Reference Manual rev4
+ * suggests that all instances of the "PSC clock generation" are equal,
+ * and that one might re-use the PSC setup for MSCAN clock generation
+ * (section 5.2.5) as well, at least the logic if not the data for
+ * description
+ *
+ * the details (starting at page 5-20) show differences in the specific
+ * inputs of the first mux stage ("can clk in", "spdif tx"), and the
+ * factual non-availability of the second mux stage (it's present yet
+ * only one input is valid)
+ *
+ * the MSCAN clock related registers (starting at page 5-35) all
+ * reference "spdif clk" at the first mux stage and don't mention any
+ * "can clk" at all, which somehow is unexpected
+ *
+ * TODO re-check the document, and clarify whether the RM is correct in
+ * the overview or in the details, and whether the difference is a
+ * clipboard induced error or results from chip revisions
+ *
+ * it turns out that the RM rev4 as of 2012-06 talks about "can" for the
+ * PSCs while RM rev3 as of 2008-10 talks about "spdif", so I guess that
+ * first a doc update is required which better reflects reality in the
+ * SoC before the implementation should follow while no questions remain
+ */
+
+/*
+ * note that this declaration raises a checkpatch warning, but
+ * it's the very data type dictated by <linux/clk-provider.h>,
+ * "fixing" this warning will break compilation
+ */
+static const char *parent_names_mux0_spdif[] = {
+	"sys", "ref", "psc-mclk-in", "spdif-tx",
+};
+
+static const char *parent_names_mux0_canin[] = {
+	"sys", "ref", "psc-mclk-in", "can-clk-in",
+};
+
+enum mclk_type {
+	MCLK_TYPE_PSC,
+	MCLK_TYPE_MSCAN,
+	MCLK_TYPE_SPDIF,
+	MCLK_TYPE_OUTCLK,
+};
+
+struct mclk_setup_data {
+	enum mclk_type type;
+	bool has_mclk1;
+	const char *name_mux0;
+	const char *name_en0;
+	const char *name_div0;
+	const char *parent_names_mux1[2];
+	const char *name_mclk;
+};
+
+#define MCLK_SETUP_DATA_PSC(id) { \
+	MCLK_TYPE_PSC, 0, \
+	"psc" #id "-mux0", \
+	"psc" #id "-en0", \
+	"psc" #id "_mclk_div", \
+	{ "psc" #id "_mclk_div", "dummy", }, \
+	"psc" #id "_mclk", \
+}
+
+#define MCLK_SETUP_DATA_MSCAN(id) { \
+	MCLK_TYPE_MSCAN, 0, \
+	"mscan" #id "-mux0", \
+	"mscan" #id "-en0", \
+	"mscan" #id "_mclk_div", \
+	{ "mscan" #id "_mclk_div", "dummy", }, \
+	"mscan" #id "_mclk", \
+}
+
+#define MCLK_SETUP_DATA_SPDIF { \
+	MCLK_TYPE_SPDIF, 1, \
+	"spdif-mux0", \
+	"spdif-en0", \
+	"spdif_mclk_div", \
+	{ "spdif_mclk_div", "spdif-rx", }, \
+	"spdif_mclk", \
+}
+
+#define MCLK_SETUP_DATA_OUTCLK(id) { \
+	MCLK_TYPE_OUTCLK, 0, \
+	"out" #id "-mux0", \
+	"out" #id "-en0", \
+	"out" #id "_mclk_div", \
+	{ "out" #id "_mclk_div", "dummy", }, \
+	"out" #id "_clk", \
+}
+
+static struct mclk_setup_data mclk_psc_data[] = {
+	MCLK_SETUP_DATA_PSC(0),
+	MCLK_SETUP_DATA_PSC(1),
+	MCLK_SETUP_DATA_PSC(2),
+	MCLK_SETUP_DATA_PSC(3),
+	MCLK_SETUP_DATA_PSC(4),
+	MCLK_SETUP_DATA_PSC(5),
+	MCLK_SETUP_DATA_PSC(6),
+	MCLK_SETUP_DATA_PSC(7),
+	MCLK_SETUP_DATA_PSC(8),
+	MCLK_SETUP_DATA_PSC(9),
+	MCLK_SETUP_DATA_PSC(10),
+	MCLK_SETUP_DATA_PSC(11),
+};
+
+static struct mclk_setup_data mclk_mscan_data[] = {
+	MCLK_SETUP_DATA_MSCAN(0),
+	MCLK_SETUP_DATA_MSCAN(1),
+	MCLK_SETUP_DATA_MSCAN(2),
+	MCLK_SETUP_DATA_MSCAN(3),
+};
+
+static struct mclk_setup_data mclk_spdif_data[] = {
+	MCLK_SETUP_DATA_SPDIF,
+};
+
+static struct mclk_setup_data mclk_outclk_data[] = {
+	MCLK_SETUP_DATA_OUTCLK(0),
+	MCLK_SETUP_DATA_OUTCLK(1),
+	MCLK_SETUP_DATA_OUTCLK(2),
+	MCLK_SETUP_DATA_OUTCLK(3),
+};
+
+/* setup the MCLK clock subtree of an individual PSC/MSCAN/SPDIF */
+static void __init mpc512x_clk_setup_mclk(struct mclk_setup_data *entry, size_t idx)
+{
+	size_t clks_idx_pub, clks_idx_int;
+	u32 __iomem *mccr_reg;	/* MCLK control register (mux, en, div) */
+	int div;
+
+	/* derive a few parameters from the component type and index */
+	switch (entry->type) {
+	case MCLK_TYPE_PSC:
+		clks_idx_pub = MPC512x_CLK_PSC0_MCLK + idx;
+		clks_idx_int = MPC512x_CLK_MCLKS_FIRST
+			     + (idx) * MCLK_MAX_IDX;
+		mccr_reg = &clkregs->psc_ccr[idx];
+		break;
+	case MCLK_TYPE_MSCAN:
+		clks_idx_pub = MPC512x_CLK_MSCAN0_MCLK + idx;
+		clks_idx_int = MPC512x_CLK_MCLKS_FIRST
+			     + (NR_PSCS + idx) * MCLK_MAX_IDX;
+		mccr_reg = &clkregs->mscan_ccr[idx];
+		break;
+	case MCLK_TYPE_SPDIF:
+		clks_idx_pub = MPC512x_CLK_SPDIF_MCLK;
+		clks_idx_int = MPC512x_CLK_MCLKS_FIRST
+			     + (NR_PSCS + NR_MSCANS) * MCLK_MAX_IDX;
+		mccr_reg = &clkregs->spccr;
+		break;
+	case MCLK_TYPE_OUTCLK:
+		clks_idx_pub = MPC512x_CLK_OUT0_CLK + idx;
+		clks_idx_int = MPC512x_CLK_MCLKS_FIRST
+			     + (NR_PSCS + NR_MSCANS + NR_SPDIFS + idx)
+			     * MCLK_MAX_IDX;
+		mccr_reg = &clkregs->out_ccr[idx];
+		break;
+	default:
+		return;
+	}
+
+	/*
+	 * this was grabbed from the PPC_CLOCK implementation, which
+	 * enforced a specific MCLK divider while the clock was gated
+	 * during setup (that's a documented hardware requirement)
+	 *
+	 * the PPC_CLOCK implementation might even have violated the
+	 * "MCLK <= IPS" constraint, the fixed divider value of 1
+	 * results in a divider of 2 and thus MCLK = SYS/2 which equals
+	 * CSB which is greater than IPS; the serial port setup may have
+	 * adjusted the divider which the clock setup might have left in
+	 * an undesirable state
+	 *
+	 * initial setup is:
+	 * - MCLK 0 from SYS
+	 * - MCLK DIV such to not exceed the IPS clock
+	 * - MCLK 0 enabled
+	 * - MCLK 1 from MCLK DIV
+	 */
+	div = clk_get_rate(clks[MPC512x_CLK_SYS]);
+	div /= clk_get_rate(clks[MPC512x_CLK_IPS]);
+	out_be32(mccr_reg, (0 << 16));
+	out_be32(mccr_reg, (0 << 16) | ((div - 1) << 17));
+	out_be32(mccr_reg, (1 << 16) | ((div - 1) << 17));
+
+	/*
+	 * create the 'struct clk' items of the MCLK's clock subtree
+	 *
+	 * note that by design we always create all nodes and won't take
+	 * shortcuts here, because
+	 * - the "internal" MCLK_DIV and MCLK_OUT signal in turn are
+	 *   selectable inputs to the CFM while those who "actually use"
+	 *   the PSC/MSCAN/SPDIF (serial drivers et al) need the MCLK
+	 *   for their bitrate
+	 * - in the absence of "aliases" for clocks we need to create
+	 *   individual 'struct clk' items for whatever might get
+	 *   referenced or looked up, even if several of those items are
+	 *   identical from the logical POV (their rate value)
+	 * - for easier future maintenance and for better reflection of
+	 *   the SoC's documentation, it appears appropriate to generate
+	 *   clock items even for those muxers which actually are NOPs
+	 *   (those with two inputs of which one is reserved)
+	 */
+	clks[clks_idx_int + MCLK_IDX_MUX0] = mpc512x_clk_muxed(
+			entry->name_mux0,
+			soc_has_mclk_mux0_canin()
+				? &parent_names_mux0_canin[0]
+				: &parent_names_mux0_spdif[0],
+			ARRAY_SIZE(parent_names_mux0_spdif),
+			mccr_reg, 14, 2);
+	clks[clks_idx_int + MCLK_IDX_EN0] = mpc512x_clk_gated(
+			entry->name_en0, entry->name_mux0,
+			mccr_reg, 16);
+	clks[clks_idx_int + MCLK_IDX_DIV0] = mpc512x_clk_divider(
+			entry->name_div0,
+			entry->name_en0, CLK_SET_RATE_GATE,
+			mccr_reg, 17, 15, 0);
+	if (entry->has_mclk1) {
+		clks[clks_idx_pub] = mpc512x_clk_muxed(
+				entry->name_mclk,
+				&entry->parent_names_mux1[0],
+				ARRAY_SIZE(entry->parent_names_mux1),
+				mccr_reg, 7, 1);
+	} else {
+		clks[clks_idx_pub] = mpc512x_clk_factor(
+				entry->name_mclk,
+				entry->parent_names_mux1[0],
+				1, 1);
+	}
+}
+
+/* }}} MCLK helpers */
+
+static void __init mpc512x_clk_setup_clock_tree(struct device_node *np, int busfreq)
+{
+	int sys_mul, sys_div, ips_div;
+	int mul, div;
+	size_t mclk_idx;
+	int freq;
+
+	/*
+	 * developer's notes:
+	 * - consider whether to handle clocks which have both gates and
+	 *   dividers via intermediates or by means of composites
+	 * - fractional dividers appear to not map well to composites
+	 *   since they can be seen as a fixed multiplier and an
+	 *   adjustable divider, while composites can only combine at
+	 *   most one of a mux, div, and gate each into one 'struct clk'
+	 *   item
+	 * - PSC/MSCAN/SPDIF clock generation OTOH already is very
+	 *   specific and cannot get mapped to composites (at least not
+	 *   a single one, maybe two of them, but then some of these
+	 *   intermediate clock signals get referenced elsewhere (e.g.
+	 *   in the clock frequency measurement, CFM) and thus need
+	 *   publicly available names
+	 * - the current source layout appropriately reflects the
+	 *   hardware setup, and it works, so it's questionable whether
+	 *   further changes will result in big enough a benefit
+	 */
+
+	/* regardless of whether XTAL/OSC exists, have REF created */
+	mpc512x_clk_setup_ref_clock(np, busfreq, &sys_mul, &sys_div, &ips_div);
+
+	/* now setup the REF -> SYS -> CSB -> IPS hierarchy */
+	clks[MPC512x_CLK_SYS] = mpc512x_clk_factor("sys", "ref",
+						   sys_mul, sys_div);
+	clks[MPC512x_CLK_CSB] = mpc512x_clk_factor("csb", "sys", 1, 2);
+	clks[MPC512x_CLK_IPS] = mpc512x_clk_divtable("ips", "csb",
+						     &clkregs->scfr1, 23, 3,
+						     divtab_2346);
+	/* now setup anything below SYS and CSB and IPS */
+
+	clks[MPC512x_CLK_DDR_UG] = mpc512x_clk_factor("ddr-ug", "sys", 1, 2);
+
+	/*
+	 * the Reference Manual discusses that for SDHC only even divide
+	 * ratios are supported because clock domain synchronization
+	 * between 'per' and 'ipg' is broken;
+	 * keep the divider's bit 0 cleared (per reset value), and only
+	 * allow to setup the divider's bits 7:1, which results in that
+	 * only even divide ratios can get configured upon rate changes;
+	 * keep the "x4" name because this bit shift hack is an internal
+	 * implementation detail, the "fractional divider with quarters"
+	 * semantics remains
+	 */
+	clks[MPC512x_CLK_SDHC_x4] = mpc512x_clk_factor("sdhc-x4", "csb", 2, 1);
+	clks[MPC512x_CLK_SDHC_UG] = mpc512x_clk_divider("sdhc-ug", "sdhc-x4", 0,
+							&clkregs->scfr2, 1, 7,
+							CLK_DIVIDER_ONE_BASED);
+	if (soc_has_sdhc2()) {
+		clks[MPC512x_CLK_SDHC2_UG] = mpc512x_clk_divider(
+				"sdhc2-ug", "sdhc-x4", 0, &clkregs->scfr2,
+				9, 7, CLK_DIVIDER_ONE_BASED);
+	}
+
+	clks[MPC512x_CLK_DIU_x4] = mpc512x_clk_factor("diu-x4", "csb", 4, 1);
+	clks[MPC512x_CLK_DIU_UG] = mpc512x_clk_divider("diu-ug", "diu-x4", 0,
+						       &clkregs->scfr1, 0, 8,
+						       CLK_DIVIDER_ONE_BASED);
+
+	/*
+	 * the "power architecture PLL" was setup from data which was
+	 * sampled from the reset config word, at this point in time the
+	 * configuration can be considered fixed and read only (i.e. no
+	 * longer adjustable, or no longer in need of adjustment), which
+	 * is why we don't register a PLL here but assume fixed factors
+	 */
+	mul = get_cpmf_mult_x2();
+	div = 2;	/* compensate for the fractional factor */
+	clks[MPC512x_CLK_E300] = mpc512x_clk_factor("e300", "csb", mul, div);
+
+	if (soc_has_mbx()) {
+		clks[MPC512x_CLK_MBX_BUS_UG] = mpc512x_clk_factor(
+				"mbx-bus-ug", "csb", 1, 2);
+		clks[MPC512x_CLK_MBX_UG] = mpc512x_clk_divtable(
+				"mbx-ug", "mbx-bus-ug", &clkregs->scfr1,
+				14, 3, divtab_1234);
+		clks[MPC512x_CLK_MBX_3D_UG] = mpc512x_clk_factor(
+				"mbx-3d-ug", "mbx-ug", 1, 1);
+	}
+	if (soc_has_pci()) {
+		clks[MPC512x_CLK_PCI_UG] = mpc512x_clk_divtable(
+				"pci-ug", "csb", &clkregs->scfr1,
+				20, 3, divtab_2346);
+	}
+	if (soc_has_nfc_5125()) {
+		/*
+		 * XXX TODO implement 5125 NFC clock setup logic,
+		 * with high/low period counters in clkregs->scfr3,
+		 * currently there are no users so it's ENOIMPL
+		 */
+		clks[MPC512x_CLK_NFC_UG] = ERR_PTR(-ENOTSUPP);
+	} else {
+		clks[MPC512x_CLK_NFC_UG] = mpc512x_clk_divtable(
+				"nfc-ug", "ips", &clkregs->scfr1,
+				8, 3, divtab_1234);
+	}
+	clks[MPC512x_CLK_LPC_UG] = mpc512x_clk_divtable("lpc-ug", "ips",
+							&clkregs->scfr1, 11, 3,
+							divtab_1234);
+
+	clks[MPC512x_CLK_LPC] = mpc512x_clk_gated("lpc", "lpc-ug",
+						  &clkregs->sccr1, 30);
+	clks[MPC512x_CLK_NFC] = mpc512x_clk_gated("nfc", "nfc-ug",
+						  &clkregs->sccr1, 29);
+	if (soc_has_pata()) {
+		clks[MPC512x_CLK_PATA] = mpc512x_clk_gated(
+				"pata", "ips", &clkregs->sccr1, 28);
+	}
+	/* for PSCs there is a "registers" gate and a bitrate MCLK subtree */
+	for (mclk_idx = 0; mclk_idx < soc_max_pscnum(); mclk_idx++) {
+		char name[12];
+		snprintf(name, sizeof(name), "psc%d", mclk_idx);
+		clks[MPC512x_CLK_PSC0 + mclk_idx] = mpc512x_clk_gated(
+				name, "ips", &clkregs->sccr1, 27 - mclk_idx);
+		mpc512x_clk_setup_mclk(&mclk_psc_data[mclk_idx], mclk_idx);
+	}
+	clks[MPC512x_CLK_PSC_FIFO] = mpc512x_clk_gated("psc-fifo", "ips",
+						       &clkregs->sccr1, 15);
+	if (soc_has_sata()) {
+		clks[MPC512x_CLK_SATA] = mpc512x_clk_gated(
+				"sata", "ips", &clkregs->sccr1, 14);
+	}
+	clks[MPC512x_CLK_FEC] = mpc512x_clk_gated("fec", "ips",
+						  &clkregs->sccr1, 13);
+	if (soc_has_pci()) {
+		clks[MPC512x_CLK_PCI] = mpc512x_clk_gated(
+				"pci", "pci-ug", &clkregs->sccr1, 11);
+	}
+	clks[MPC512x_CLK_DDR] = mpc512x_clk_gated("ddr", "ddr-ug",
+						  &clkregs->sccr1, 10);
+	if (soc_has_fec2()) {
+		clks[MPC512x_CLK_FEC2] = mpc512x_clk_gated(
+				"fec2", "ips", &clkregs->sccr1, 9);
+	}
+
+	clks[MPC512x_CLK_DIU] = mpc512x_clk_gated("diu", "diu-ug",
+						  &clkregs->sccr2, 31);
+	if (soc_has_axe()) {
+		clks[MPC512x_CLK_AXE] = mpc512x_clk_gated(
+				"axe", "csb", &clkregs->sccr2, 30);
+	}
+	clks[MPC512x_CLK_MEM] = mpc512x_clk_gated("mem", "ips",
+						  &clkregs->sccr2, 29);
+	clks[MPC512x_CLK_USB1] = mpc512x_clk_gated("usb1", "csb",
+						   &clkregs->sccr2, 28);
+	clks[MPC512x_CLK_USB2] = mpc512x_clk_gated("usb2", "csb",
+						   &clkregs->sccr2, 27);
+	clks[MPC512x_CLK_I2C] = mpc512x_clk_gated("i2c", "ips",
+						  &clkregs->sccr2, 26);
+	/* MSCAN differs from PSC with just one gate for multiple components */
+	clks[MPC512x_CLK_BDLC] = mpc512x_clk_gated("bdlc", "ips",
+						   &clkregs->sccr2, 25);
+	for (mclk_idx = 0; mclk_idx < ARRAY_SIZE(mclk_mscan_data); mclk_idx++)
+		mpc512x_clk_setup_mclk(&mclk_mscan_data[mclk_idx], mclk_idx);
+	clks[MPC512x_CLK_SDHC] = mpc512x_clk_gated("sdhc", "sdhc-ug",
+						   &clkregs->sccr2, 24);
+	/* there is only one SPDIF component, which shares MCLK support code */
+	if (soc_has_spdif()) {
+		clks[MPC512x_CLK_SPDIF] = mpc512x_clk_gated(
+				"spdif", "ips", &clkregs->sccr2, 23);
+		mpc512x_clk_setup_mclk(&mclk_spdif_data[0], 0);
+	}
+	if (soc_has_mbx()) {
+		clks[MPC512x_CLK_MBX_BUS] = mpc512x_clk_gated(
+				"mbx-bus", "mbx-bus-ug", &clkregs->sccr2, 22);
+		clks[MPC512x_CLK_MBX] = mpc512x_clk_gated(
+				"mbx", "mbx-ug", &clkregs->sccr2, 21);
+		clks[MPC512x_CLK_MBX_3D] = mpc512x_clk_gated(
+				"mbx-3d", "mbx-3d-ug", &clkregs->sccr2, 20);
+	}
+	clks[MPC512x_CLK_IIM] = mpc512x_clk_gated("iim", "csb",
+						  &clkregs->sccr2, 19);
+	if (soc_has_viu()) {
+		clks[MPC512x_CLK_VIU] = mpc512x_clk_gated(
+				"viu", "csb", &clkregs->sccr2, 18);
+	}
+	if (soc_has_sdhc2()) {
+		clks[MPC512x_CLK_SDHC2] = mpc512x_clk_gated(
+				"sdhc-2", "sdhc2-ug", &clkregs->sccr2, 17);
+	}
+
+	if (soc_has_outclk()) {
+		size_t idx;	/* used as mclk_idx, just to trim line length */
+		for (idx = 0; idx < ARRAY_SIZE(mclk_outclk_data); idx++)
+			mpc512x_clk_setup_mclk(&mclk_outclk_data[idx], idx);
+	}
+
+	/*
+	 * externally provided clocks (when implemented in hardware,
+	 * device tree may specify values which otherwise were unknown)
+	 */
+	freq = get_freq_from_dt("psc_mclk_in");
+	if (!freq)
+		freq = 25000000;
+	clks[MPC512x_CLK_PSC_MCLK_IN] = mpc512x_clk_fixed("psc_mclk_in", freq);
+	if (soc_has_mclk_mux0_canin()) {
+		freq = get_freq_from_dt("can_clk_in");
+		clks[MPC512x_CLK_CAN_CLK_IN] = mpc512x_clk_fixed(
+				"can_clk_in", freq);
+	} else {
+		freq = get_freq_from_dt("spdif_tx_in");
+		clks[MPC512x_CLK_SPDIF_TX_IN] = mpc512x_clk_fixed(
+				"spdif_tx_in", freq);
+		freq = get_freq_from_dt("spdif_rx_in");
+		clks[MPC512x_CLK_SPDIF_TX_IN] = mpc512x_clk_fixed(
+				"spdif_rx_in", freq);
+	}
+
+	/* fixed frequency for AC97, always 24.567MHz */
+	clks[MPC512x_CLK_AC97] = mpc512x_clk_fixed("ac97", 24567000);
+
+	/*
+	 * pre-enable those "internal" clock items which never get
+	 * claimed by any peripheral driver, to not have the clock
+	 * subsystem disable them late at startup
+	 */
+	clk_prepare_enable(clks[MPC512x_CLK_DUMMY]);
+	clk_prepare_enable(clks[MPC512x_CLK_E300]);	/* PowerPC CPU */
+	clk_prepare_enable(clks[MPC512x_CLK_DDR]);	/* DRAM */
+	clk_prepare_enable(clks[MPC512x_CLK_MEM]);	/* SRAM */
+	clk_prepare_enable(clks[MPC512x_CLK_IPS]);	/* SoC periph */
+	clk_prepare_enable(clks[MPC512x_CLK_LPC]);	/* boot media */
+}
+
+/*
+ * registers the set of public clocks (those listed in the dt-bindings/
+ * header file) for OF lookups, keeps the intermediates private to us
+ */
+static void __init mpc5121_clk_register_of_provider(struct device_node *np)
+{
+	clk_data.clks = clks;
+	clk_data.clk_num = MPC512x_CLK_LAST_PUBLIC + 1;	/* _not_ ARRAY_SIZE() */
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+
+/*
+ * temporary support for the period of time between introduction of CCF
+ * support and the adjustment of peripheral drivers to OF based lookups
+ */
+static void __init mpc5121_clk_provide_migration_support(void)
+{
+	struct device_node *np;
+	/*
+	 * pre-enable those clock items which are not yet appropriately
+	 * acquired by their peripheral driver
+	 *
+	 * the PCI clock cannot get acquired by its peripheral driver,
+	 * because for this platform the driver won't probe(), instead
+	 * initialization is done from within the .setup_arch() routine
+	 * at a point in time where the clock provider has not been
+	 * setup yet and thus isn't available yet
+	 *
+	 * so we "pre-enable" the clock here, to not have the clock
+	 * subsystem automatically disable this item in a late init call
+	 *
+	 * this PCI clock pre-enable workaround only applies when there
+	 * are device tree nodes for PCI and thus the peripheral driver
+	 * has attached to bridges, otherwise the PCI clock remains
+	 * unused and so it gets disabled
+	 */
+	clk_prepare_enable(clks[MPC512x_CLK_PSC3_MCLK]);/* serial console */
+	np = of_find_compatible_node(NULL, "pci", "fsl,mpc5121-pci");
+	of_node_put(np);
+	if (np)
+		clk_prepare_enable(clks[MPC512x_CLK_PCI]);
+}
+
+/*
+ * those macros are not exactly pretty, but they encapsulate a lot
+ * of copy'n'paste heavy code which is even more ugly, and reduce
+ * the potential for inconsistencies in those many code copies
+ */
+#define FOR_NODES(compatname) \
+	for_each_compatible_node(np, NULL, compatname)
+
+#define NODE_PREP do { \
+	of_address_to_resource(np, 0, &res); \
+	snprintf(devname, sizeof(devname), "%pa.%s", &res.start, np->name); \
+} while (0)
+
+#define NODE_CHK(clkname, clkitem, regnode, regflag) do { \
+	struct clk *clk; \
+	clk = of_clk_get_by_name(np, clkname); \
+	if (IS_ERR(clk)) { \
+		clk = clkitem; \
+		clk_register_clkdev(clk, clkname, devname); \
+		if (regnode) \
+			clk_register_clkdev(clk, clkname, np->name); \
+		did_register |= DID_REG_ ## regflag; \
+		pr_debug("clock alias name '%s' for dev '%s' pointer %p\n", \
+			 clkname, devname, clk); \
+	} else { \
+		clk_put(clk); \
+	} \
+} while (0)
+
+/*
+ * register source code provided fallback results for clock lookups,
+ * these get consulted when OF based clock lookup fails (that is in the
+ * case of not yet adjusted device tree data, where clock related specs
+ * are missing)
+ */
+static void __init mpc5121_clk_provide_backwards_compat(void)
+{
+	enum did_reg_flags {
+		DID_REG_PSC	= BIT(0),
+		DID_REG_PSCFIFO	= BIT(1),
+		DID_REG_NFC	= BIT(2),
+		DID_REG_CAN	= BIT(3),
+		DID_REG_I2C	= BIT(4),
+		DID_REG_DIU	= BIT(5),
+		DID_REG_VIU	= BIT(6),
+		DID_REG_FEC	= BIT(7),
+		DID_REG_USB	= BIT(8),
+		DID_REG_PATA	= BIT(9),
+	};
+
+	int did_register;
+	struct device_node *np;
+	struct resource res;
+	int idx;
+	char devname[32];
+
+	did_register = 0;
+
+	FOR_NODES(mpc512x_select_psc_compat()) {
+		NODE_PREP;
+		idx = (res.start >> 8) & 0xf;
+		NODE_CHK("ipg", clks[MPC512x_CLK_PSC0 + idx], 0, PSC);
+		NODE_CHK("mclk", clks[MPC512x_CLK_PSC0_MCLK + idx], 0, PSC);
+	}
+
+	FOR_NODES("fsl,mpc5121-psc-fifo") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_PSC_FIFO], 1, PSCFIFO);
+	}
+
+	FOR_NODES("fsl,mpc5121-nfc") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_NFC], 0, NFC);
+	}
+
+	FOR_NODES("fsl,mpc5121-mscan") {
+		NODE_PREP;
+		idx = 0;
+		idx += (res.start & 0x2000) ? 2 : 0;
+		idx += (res.start & 0x0080) ? 1 : 0;
+		NODE_CHK("ipg", clks[MPC512x_CLK_BDLC], 0, CAN);
+		NODE_CHK("mclk", clks[MPC512x_CLK_MSCAN0_MCLK + idx], 0, CAN);
+	}
+
+	/*
+	 * do register the 'ips', 'sys', and 'ref' names globally
+	 * instead of inside each individual CAN node, as there is no
+	 * potential for a name conflict (in contrast to 'ipg' and 'mclk')
+	 */
+	if (did_register & DID_REG_CAN) {
+		clk_register_clkdev(clks[MPC512x_CLK_IPS], "ips", NULL);
+		clk_register_clkdev(clks[MPC512x_CLK_SYS], "sys", NULL);
+		clk_register_clkdev(clks[MPC512x_CLK_REF], "ref", NULL);
+	}
+
+	FOR_NODES("fsl,mpc5121-i2c") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_I2C], 0, I2C);
+	}
+
+	/*
+	 * workaround for the fact that the I2C driver does an "anonymous"
+	 * lookup (NULL name spec, which yields the first clock spec) for
+	 * which we cannot register an alias -- a _global_ 'ipg' alias that
+	 * is not bound to any device name and returns the I2C clock item
+	 * is not a good idea
+	 *
+	 * so we have the lookup in the peripheral driver fail, which is
+	 * silent and non-fatal, and pre-enable the clock item here such
+	 * that register access is possible
+	 *
+	 * see commit b3bfce2b "i2c: mpc: cleanup clock API use" for
+	 * details, adjusting s/NULL/"ipg"/ in i2c-mpc.c would make this
+	 * workaround obsolete
+	 */
+	if (did_register & DID_REG_I2C)
+		clk_prepare_enable(clks[MPC512x_CLK_I2C]);
+
+	FOR_NODES("fsl,mpc5121-diu") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_DIU], 1, DIU);
+	}
+
+	FOR_NODES("fsl,mpc5121-viu") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_VIU], 0, VIU);
+	}
+
+	/*
+	 * note that 2771399a "fs_enet: cleanup clock API use" did use the
+	 * "per" string for the clock lookup in contrast to the "ipg" name
+	 * which most other nodes are using -- this is not a fatal thing
+	 * but just something to keep in mind when doing compatibility
+	 * registration, it's a non-issue with up-to-date device tree data
+	 */
+	FOR_NODES("fsl,mpc5121-fec") {
+		NODE_PREP;
+		NODE_CHK("per", clks[MPC512x_CLK_FEC], 0, FEC);
+	}
+	FOR_NODES("fsl,mpc5121-fec-mdio") {
+		NODE_PREP;
+		NODE_CHK("per", clks[MPC512x_CLK_FEC], 0, FEC);
+	}
+	/*
+	 * MPC5125 has two FECs: FEC1 at 0x2800, FEC2 at 0x4800;
+	 * the clock items don't "form an array" since FEC2 was
+	 * added only later and was not allowed to shift all other
+	 * clock item indices, so the numbers aren't adjacent
+	 */
+	FOR_NODES("fsl,mpc5125-fec") {
+		NODE_PREP;
+		if (res.start & 0x4000)
+			idx = MPC512x_CLK_FEC2;
+		else
+			idx = MPC512x_CLK_FEC;
+		NODE_CHK("per", clks[idx], 0, FEC);
+	}
+
+	FOR_NODES("fsl,mpc5121-usb2-dr") {
+		NODE_PREP;
+		idx = (res.start & 0x4000) ? 1 : 0;
+		NODE_CHK("ipg", clks[MPC512x_CLK_USB1 + idx], 0, USB);
+	}
+
+	FOR_NODES("fsl,mpc5121-pata") {
+		NODE_PREP;
+		NODE_CHK("ipg", clks[MPC512x_CLK_PATA], 0, PATA);
+	}
+
+	/*
+	 * try to collapse diagnostics into a single line of output yet
+	 * provide a full list of what is missing, to avoid noise in the
+	 * absence of up-to-date device tree data -- backwards
+	 * compatibility to old DTBs is a requirement, updates may be
+	 * desirable or preferrable but are not at all mandatory
+	 */
+	if (did_register) {
+		pr_notice("device tree lacks clock specs, adding fallbacks (0x%x,%s%s%s%s%s%s%s%s%s%s)\n",
+			  did_register,
+			  (did_register & DID_REG_PSC) ? " PSC" : "",
+			  (did_register & DID_REG_PSCFIFO) ? " PSCFIFO" : "",
+			  (did_register & DID_REG_NFC) ? " NFC" : "",
+			  (did_register & DID_REG_CAN) ? " CAN" : "",
+			  (did_register & DID_REG_I2C) ? " I2C" : "",
+			  (did_register & DID_REG_DIU) ? " DIU" : "",
+			  (did_register & DID_REG_VIU) ? " VIU" : "",
+			  (did_register & DID_REG_FEC) ? " FEC" : "",
+			  (did_register & DID_REG_USB) ? " USB" : "",
+			  (did_register & DID_REG_PATA) ? " PATA" : "");
+	} else {
+		pr_debug("device tree has clock specs, no fallbacks added\n");
+	}
+}
+
+/*
+ * The "fixed-clock" nodes (which includes the oscillator node if the board's
+ * DT provides one) has already been scanned by the of_clk_init() in
+ * time_init().
+ */
+int __init mpc5121_clk_init(void)
+{
+	struct device_node *clk_np;
+	int busfreq;
+
+	/* map the clock control registers */
+	clk_np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+	if (!clk_np)
+		return -ENODEV;
+	clkregs = of_iomap(clk_np, 0);
+	WARN_ON(!clkregs);
+
+	/* determine the SoC variant we run on */
+	mpc512x_clk_determine_soc();
+
+	/* invalidate all not yet registered clock slots */
+	mpc512x_clk_preset_data();
+
+	/*
+	 * add a dummy clock for those situations where a clock spec is
+	 * required yet no real clock is involved
+	 */
+	clks[MPC512x_CLK_DUMMY] = mpc512x_clk_fixed("dummy", 0);
+
+	/*
+	 * have all the real nodes in the clock tree populated from REF
+	 * down to all leaves, either starting from the OSC node or from
+	 * a REF root that was created from the IPS bus clock input
+	 */
+	busfreq = get_freq_from_dt("bus-frequency");
+	mpc512x_clk_setup_clock_tree(clk_np, busfreq);
+
+	/* register as an OF clock provider */
+	mpc5121_clk_register_of_provider(clk_np);
+
+	of_node_put(clk_np);
+
+	/*
+	 * unbreak not yet adjusted peripheral drivers during migration
+	 * towards fully operational common clock support, and allow
+	 * operation in the absence of clock related device tree specs
+	 */
+	mpc5121_clk_provide_migration_support();
+	mpc5121_clk_provide_backwards_compat();
+
+	return 0;
+}
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
new file mode 100644
index 000000000..fc3fb999c
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
+ *
+ * Description:
+ * MPC5121 ADS board setup
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/time.h>
+
+#include <sysdev/fsl_pci.h>
+
+#include "mpc512x.h"
+#include "mpc5121_ads.h"
+
+static void __init mpc5121_ads_setup_arch(void)
+{
+	printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
+	/*
+	 * cpld regs are needed early
+	 */
+	mpc5121_ads_cpld_map();
+
+	mpc512x_setup_arch();
+}
+
+static void __init mpc5121_ads_setup_pci(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+
+	for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
+		mpc83xx_add_bridge(np);
+#endif
+}
+
+static void __init mpc5121_ads_init_IRQ(void)
+{
+	mpc512x_init_IRQ();
+	mpc5121_ads_cpld_pic_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5121_ads_probe(void)
+{
+	if (!of_machine_is_compatible("fsl,mpc5121ads"))
+		return 0;
+
+	mpc512x_init_early();
+
+	return 1;
+}
+
+define_machine(mpc5121_ads) {
+	.name			= "MPC5121 ADS",
+	.probe			= mpc5121_ads_probe,
+	.setup_arch		= mpc5121_ads_setup_arch,
+	.discover_phbs		= mpc5121_ads_setup_pci,
+	.init			= mpc512x_init,
+	.init_IRQ		= mpc5121_ads_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
+};
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.h b/arch/powerpc/platforms/512x/mpc5121_ads.h
new file mode 100644
index 000000000..c88dea828
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Prototypes for ADS5121 specific code
+ */
+
+#ifndef __MPC512ADS_H__
+#define __MPC512ADS_H__
+extern void __init mpc5121_ads_cpld_map(void);
+extern void __init mpc5121_ads_cpld_pic_init(void);
+#endif				/* __MPC512ADS_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
new file mode 100644
index 000000000..6f08d07ae
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121ADS CPLD irq handling
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+static struct device_node *cpld_pic_node;
+static struct irq_domain *cpld_pic_host;
+
+/*
+ * Bits to ignore in the misc_status register
+ * 0x10 touch screen pendown is hard routed to irq1
+ * 0x02 pci status is read from pci status register
+ */
+#define MISC_IGNORE 0x12
+
+/*
+ * Nothing to ignore in pci status register
+ */
+#define PCI_IGNORE 0x00
+
+struct cpld_pic {
+	u8 pci_mask;
+	u8 pci_status;
+	u8 route;
+	u8 misc_mask;
+	u8 misc_status;
+	u8 misc_control;
+};
+
+static struct cpld_pic __iomem *cpld_regs;
+
+static void __iomem *
+irq_to_pic_mask(unsigned int irq)
+{
+	return irq <= 7 ? &cpld_regs->pci_mask : &cpld_regs->misc_mask;
+}
+
+static unsigned int
+irq_to_pic_bit(unsigned int irq)
+{
+	return 1 << (irq & 0x7);
+}
+
+static void
+cpld_mask_irq(struct irq_data *d)
+{
+	unsigned int cpld_irq = (unsigned int)irqd_to_hwirq(d);
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) | irq_to_pic_bit(cpld_irq));
+}
+
+static void
+cpld_unmask_irq(struct irq_data *d)
+{
+	unsigned int cpld_irq = (unsigned int)irqd_to_hwirq(d);
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) & ~irq_to_pic_bit(cpld_irq));
+}
+
+static struct irq_chip cpld_pic = {
+	.name = "CPLD PIC",
+	.irq_mask = cpld_mask_irq,
+	.irq_ack = cpld_mask_irq,
+	.irq_unmask = cpld_unmask_irq,
+};
+
+static unsigned int
+cpld_pic_get_irq(int offset, u8 ignore, u8 __iomem *statusp,
+			    u8 __iomem *maskp)
+{
+	u8 status = in_8(statusp);
+	u8 mask = in_8(maskp);
+
+	/* ignore don't cares and masked irqs */
+	status |= (ignore | mask);
+
+	if (status == 0xff)
+		return ~0;
+
+	return ffz(status) + offset;
+}
+
+static void cpld_pic_cascade(struct irq_desc *desc)
+{
+	unsigned int hwirq;
+
+	hwirq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status,
+		&cpld_regs->pci_mask);
+	if (hwirq != ~0) {
+		generic_handle_domain_irq(cpld_pic_host, hwirq);
+		return;
+	}
+
+	hwirq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status,
+		&cpld_regs->misc_mask);
+	if (hwirq != ~0) {
+		generic_handle_domain_irq(cpld_pic_host, hwirq);
+		return;
+	}
+}
+
+static int
+cpld_pic_host_match(struct irq_domain *h, struct device_node *node,
+		    enum irq_domain_bus_token bus_token)
+{
+	return cpld_pic_node == node;
+}
+
+static int
+cpld_pic_host_map(struct irq_domain *h, unsigned int virq,
+			     irq_hw_number_t hw)
+{
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_chip_and_handler(virq, &cpld_pic, handle_level_irq);
+	return 0;
+}
+
+static const struct irq_domain_ops cpld_pic_host_ops = {
+	.match = cpld_pic_host_match,
+	.map = cpld_pic_host_map,
+};
+
+void __init
+mpc5121_ads_cpld_map(void)
+{
+	struct device_node *np = NULL;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	cpld_regs = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+void __init
+mpc5121_ads_cpld_pic_init(void)
+{
+	unsigned int cascade_irq;
+	struct device_node *np = NULL;
+
+	pr_debug("cpld_ic_init\n");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	if (!cpld_regs)
+		goto end;
+
+	cascade_irq = irq_of_parse_and_map(np, 0);
+	if (!cascade_irq)
+		goto end;
+
+	/*
+	 * statically route touch screen pendown through 1
+	 * and ignore it here
+	 * route all others through our cascade irq
+	 */
+	out_8(&cpld_regs->route, 0xfd);
+	out_8(&cpld_regs->pci_mask, 0xff);
+	/* unmask pci ints in misc mask */
+	out_8(&cpld_regs->misc_mask, ~(MISC_IGNORE));
+
+	cpld_pic_node = of_node_get(np);
+
+	cpld_pic_host = irq_domain_add_linear(np, 16, &cpld_pic_host_ops, NULL);
+	if (!cpld_pic_host) {
+		printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n");
+		goto end;
+	}
+
+	irq_set_chained_handler(cascade_irq, cpld_pic_cascade);
+end:
+	of_node_put(np);
+}
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
new file mode 100644
index 000000000..2f3c60e37
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Prototypes for MPC512x shared code
+ */
+
+#ifndef __MPC512X_H__
+#define __MPC512X_H__
+extern void __init mpc512x_init_IRQ(void);
+extern void __init mpc512x_init_early(void);
+extern void __init mpc512x_init(void);
+extern void __init mpc512x_setup_arch(void);
+extern int __init mpc5121_clk_init(void);
+const char *__init mpc512x_select_psc_compat(void);
+const char *__init mpc512x_select_reset_compat(void);
+extern void __noreturn mpc512x_restart(char *cmd);
+
+#endif				/* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_generic.c b/arch/powerpc/platforms/512x/mpc512x_generic.c
new file mode 100644
index 000000000..364564c99
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_generic.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC512x SoC setup
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+/*
+ * list of supported boards
+ */
+static const char * const board[] __initconst = {
+	"prt,prtlvt",
+	"fsl,mpc5125ads",
+	"ifm,ac14xx",
+	NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc512x_generic_probe(void)
+{
+	if (!of_device_compatible_match(of_root, board))
+		return 0;
+
+	mpc512x_init_early();
+
+	return 1;
+}
+
+define_machine(mpc512x_generic) {
+	.name			= "MPC512x generic",
+	.probe			= mpc512x_generic_probe,
+	.init			= mpc512x_init,
+	.setup_arch		= mpc512x_setup_arch,
+	.init_IRQ		= mpc512x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
+};
diff --git a/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
new file mode 100644
index 000000000..04bf6ecf7
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_lpbfifo.c
@@ -0,0 +1,538 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * The driver for Freescale MPC512x LocalPlus Bus FIFO
+ * (called SCLPC in the Reference Manual).
+ *
+ * Copyright (C) 2013-2015 Alexander Popov <alex.popov@linux.com>.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/mpc5121.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+
+#define DRV_NAME "mpc512x_lpbfifo"
+
+struct cs_range {
+	u32 csnum;
+	u32 base; /* must be zero */
+	u32 addr;
+	u32 size;
+};
+
+static struct lpbfifo_data {
+	spinlock_t lock; /* for protecting lpbfifo_data */
+	phys_addr_t regs_phys;
+	resource_size_t regs_size;
+	struct mpc512x_lpbfifo __iomem *regs;
+	int irq;
+	struct cs_range *cs_ranges;
+	size_t cs_n;
+	struct dma_chan *chan;
+	struct mpc512x_lpbfifo_request *req;
+	dma_addr_t ram_bus_addr;
+	bool wait_lpbfifo_irq;
+	bool wait_lpbfifo_callback;
+} lpbfifo;
+
+/*
+ * A data transfer from RAM to some device on LPB is finished
+ * when both mpc512x_lpbfifo_irq() and mpc512x_lpbfifo_callback()
+ * have been called. We execute the callback registered in
+ * mpc512x_lpbfifo_request just after that.
+ * But for a data transfer from some device on LPB to RAM we don't enable
+ * LPBFIFO interrupt because clearing MPC512X_SCLPC_SUCCESS interrupt flag
+ * automatically disables LPBFIFO reading request to the DMA controller
+ * and the data transfer hangs. So the callback registered in
+ * mpc512x_lpbfifo_request is executed at the end of mpc512x_lpbfifo_callback().
+ */
+
+/*
+ * mpc512x_lpbfifo_irq - IRQ handler for LPB FIFO
+ */
+static irqreturn_t mpc512x_lpbfifo_irq(int irq, void *param)
+{
+	struct device *dev = (struct device *)param;
+	struct mpc512x_lpbfifo_request *req = NULL;
+	unsigned long flags;
+	u32 status;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+
+	if (!lpbfifo.regs)
+		goto end;
+
+	req = lpbfifo.req;
+	if (!req || req->dir == MPC512X_LPBFIFO_REQ_DIR_READ) {
+		dev_err(dev, "bogus LPBFIFO IRQ\n");
+		goto end;
+	}
+
+	status = in_be32(&lpbfifo.regs->status);
+	if (status != MPC512X_SCLPC_SUCCESS) {
+		dev_err(dev, "DMA transfer from RAM to peripheral failed\n");
+		out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+		goto end;
+	}
+	/* Clear the interrupt flag */
+	out_be32(&lpbfifo.regs->status, MPC512X_SCLPC_SUCCESS);
+
+	lpbfifo.wait_lpbfifo_irq = false;
+
+	if (lpbfifo.wait_lpbfifo_callback)
+		goto end;
+
+	/* Transfer is finished, set the FIFO as idle */
+	lpbfifo.req = NULL;
+
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	if (req->callback)
+		req->callback(req);
+
+	return IRQ_HANDLED;
+
+ end:
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+	return IRQ_HANDLED;
+}
+
+/*
+ * mpc512x_lpbfifo_callback is called by DMA driver when
+ * DMA transaction is finished.
+ */
+static void mpc512x_lpbfifo_callback(void *param)
+{
+	unsigned long flags;
+	struct mpc512x_lpbfifo_request *req = NULL;
+	enum dma_data_direction dir;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+
+	if (!lpbfifo.regs) {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		return;
+	}
+
+	req = lpbfifo.req;
+	if (!req) {
+		pr_err("bogus LPBFIFO callback\n");
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+		return;
+	}
+
+	/* Release the mapping */
+	if (req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
+		dir = DMA_TO_DEVICE;
+	else
+		dir = DMA_FROM_DEVICE;
+	dma_unmap_single(lpbfifo.chan->device->dev,
+			lpbfifo.ram_bus_addr, req->size, dir);
+
+	lpbfifo.wait_lpbfifo_callback = false;
+
+	if (!lpbfifo.wait_lpbfifo_irq) {
+		/* Transfer is finished, set the FIFO as idle */
+		lpbfifo.req = NULL;
+
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+		if (req->callback)
+			req->callback(req);
+	} else {
+		spin_unlock_irqrestore(&lpbfifo.lock, flags);
+	}
+}
+
+static int mpc512x_lpbfifo_kick(void)
+{
+	u32 bits;
+	bool no_incr = false;
+	u32 bpt = 32; /* max bytes per LPBFIFO transaction involving DMA */
+	u32 cs = 0;
+	size_t i;
+	struct dma_device *dma_dev = NULL;
+	struct scatterlist sg;
+	enum dma_data_direction dir;
+	struct dma_slave_config dma_conf = {};
+	struct dma_async_tx_descriptor *dma_tx = NULL;
+	dma_cookie_t cookie;
+	int ret;
+
+	/*
+	 * 1. Fit the requirements:
+	 * - the packet size must be a multiple of 4 since FIFO Data Word
+	 *    Register allows only full-word access according the Reference
+	 *    Manual;
+	 * - the physical address of the device on LPB and the packet size
+	 *    must be aligned on BPT (bytes per transaction) or 8-bytes
+	 *    boundary according the Reference Manual;
+	 * - but we choose DMA maxburst equal (or very close to) BPT to prevent
+	 *    DMA controller from overtaking FIFO and causing FIFO underflow
+	 *    error. So we force the packet size to be aligned on BPT boundary
+	 *    not to confuse DMA driver which requires the packet size to be
+	 *    aligned on maxburst boundary;
+	 * - BPT should be set to the LPB device port size for operation with
+	 *    disabled auto-incrementing according Reference Manual.
+	 */
+	if (lpbfifo.req->size == 0 || !IS_ALIGNED(lpbfifo.req->size, 4))
+		return -EINVAL;
+
+	if (lpbfifo.req->portsize != LPB_DEV_PORTSIZE_UNDEFINED) {
+		bpt = lpbfifo.req->portsize;
+		no_incr = true;
+	}
+
+	while (bpt > 1) {
+		if (IS_ALIGNED(lpbfifo.req->dev_phys_addr, min(bpt, 0x8u)) &&
+					IS_ALIGNED(lpbfifo.req->size, bpt)) {
+			break;
+		}
+
+		if (no_incr)
+			return -EINVAL;
+
+		bpt >>= 1;
+	}
+	dma_conf.dst_maxburst = max(bpt, 0x4u) / 4;
+	dma_conf.src_maxburst = max(bpt, 0x4u) / 4;
+
+	for (i = 0; i < lpbfifo.cs_n; i++) {
+		phys_addr_t cs_start = lpbfifo.cs_ranges[i].addr;
+		phys_addr_t cs_end = cs_start + lpbfifo.cs_ranges[i].size;
+		phys_addr_t access_start = lpbfifo.req->dev_phys_addr;
+		phys_addr_t access_end = access_start + lpbfifo.req->size;
+
+		if (access_start >= cs_start && access_end <= cs_end) {
+			cs = lpbfifo.cs_ranges[i].csnum;
+			break;
+		}
+	}
+	if (i == lpbfifo.cs_n)
+		return -EFAULT;
+
+	/* 2. Prepare DMA */
+	dma_dev = lpbfifo.chan->device;
+
+	if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE) {
+		dir = DMA_TO_DEVICE;
+		dma_conf.direction = DMA_MEM_TO_DEV;
+		dma_conf.dst_addr = lpbfifo.regs_phys +
+				offsetof(struct mpc512x_lpbfifo, data_word);
+	} else {
+		dir = DMA_FROM_DEVICE;
+		dma_conf.direction = DMA_DEV_TO_MEM;
+		dma_conf.src_addr = lpbfifo.regs_phys +
+				offsetof(struct mpc512x_lpbfifo, data_word);
+	}
+	dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+	/* Make DMA channel work with LPB FIFO data register */
+	if (dma_dev->device_config(lpbfifo.chan, &dma_conf)) {
+		ret = -EINVAL;
+		goto err_dma_prep;
+	}
+
+	sg_init_table(&sg, 1);
+
+	sg_dma_address(&sg) = dma_map_single(dma_dev->dev,
+			lpbfifo.req->ram_virt_addr, lpbfifo.req->size, dir);
+	if (dma_mapping_error(dma_dev->dev, sg_dma_address(&sg)))
+		return -EFAULT;
+
+	lpbfifo.ram_bus_addr = sg_dma_address(&sg); /* For freeing later */
+
+	sg_dma_len(&sg) = lpbfifo.req->size;
+
+	dma_tx = dmaengine_prep_slave_sg(lpbfifo.chan, &sg,
+						1, dma_conf.direction, 0);
+	if (!dma_tx) {
+		ret = -ENOSPC;
+		goto err_dma_prep;
+	}
+	dma_tx->callback = mpc512x_lpbfifo_callback;
+	dma_tx->callback_param = NULL;
+
+	/* 3. Prepare FIFO */
+	out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+	out_be32(&lpbfifo.regs->enable, 0x0);
+
+	/*
+	 * Configure the watermarks for write operation (RAM->DMA->FIFO->dev):
+	 * - high watermark 7 words according the Reference Manual,
+	 * - low watermark 512 bytes (half of the FIFO).
+	 * These watermarks don't work for read operation since the
+	 * MPC512X_SCLPC_FLUSH bit is set (according the Reference Manual).
+	 */
+	out_be32(&lpbfifo.regs->fifo_ctrl, MPC512X_SCLPC_FIFO_CTRL(0x7));
+	out_be32(&lpbfifo.regs->fifo_alarm, MPC512X_SCLPC_FIFO_ALARM(0x200));
+
+	/*
+	 * Start address is a physical address of the region which belongs
+	 * to the device on the LocalPlus Bus
+	 */
+	out_be32(&lpbfifo.regs->start_addr, lpbfifo.req->dev_phys_addr);
+
+	/*
+	 * Configure chip select, transfer direction, address increment option
+	 * and bytes per transaction option
+	 */
+	bits = MPC512X_SCLPC_CS(cs);
+	if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_READ)
+		bits |= MPC512X_SCLPC_READ | MPC512X_SCLPC_FLUSH;
+	if (no_incr)
+		bits |= MPC512X_SCLPC_DAI;
+	bits |= MPC512X_SCLPC_BPT(bpt);
+	out_be32(&lpbfifo.regs->ctrl, bits);
+
+	/* Unmask irqs */
+	bits = MPC512X_SCLPC_ENABLE | MPC512X_SCLPC_ABORT_INT_ENABLE;
+	if (lpbfifo.req->dir == MPC512X_LPBFIFO_REQ_DIR_WRITE)
+		bits |= MPC512X_SCLPC_NORM_INT_ENABLE;
+	else
+		lpbfifo.wait_lpbfifo_irq = false;
+
+	out_be32(&lpbfifo.regs->enable, bits);
+
+	/* 4. Set packet size and kick FIFO off */
+	bits = lpbfifo.req->size | MPC512X_SCLPC_START;
+	out_be32(&lpbfifo.regs->pkt_size, bits);
+
+	/* 5. Finally kick DMA off */
+	cookie = dma_tx->tx_submit(dma_tx);
+	if (dma_submit_error(cookie)) {
+		ret = -ENOSPC;
+		goto err_dma_submit;
+	}
+
+	return 0;
+
+ err_dma_submit:
+	out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+ err_dma_prep:
+	dma_unmap_single(dma_dev->dev, sg_dma_address(&sg),
+						lpbfifo.req->size, dir);
+	return ret;
+}
+
+static int mpc512x_lpbfifo_submit_locked(struct mpc512x_lpbfifo_request *req)
+{
+	int ret = 0;
+
+	if (!lpbfifo.regs)
+		return -ENODEV;
+
+	/* Check whether a transfer is in progress */
+	if (lpbfifo.req)
+		return -EBUSY;
+
+	lpbfifo.wait_lpbfifo_irq = true;
+	lpbfifo.wait_lpbfifo_callback = true;
+	lpbfifo.req = req;
+
+	ret = mpc512x_lpbfifo_kick();
+	if (ret != 0)
+		lpbfifo.req = NULL; /* Set the FIFO as idle */
+
+	return ret;
+}
+
+int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+	ret = mpc512x_lpbfifo_submit_locked(req);
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(mpc512x_lpbfifo_submit);
+
+/*
+ * LPBFIFO driver uses "ranges" property of "localbus" device tree node
+ * for being able to determine the chip select number of a client device
+ * ordering a DMA transfer.
+ */
+static int get_cs_ranges(struct device *dev)
+{
+	int ret = -ENODEV;
+	struct device_node *lb_node;
+	const u32 *addr_cells_p;
+	const u32 *size_cells_p;
+	int proplen;
+	size_t i;
+
+	lb_node = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-localbus");
+	if (!lb_node)
+		return ret;
+
+	/*
+	 * The node defined as compatible with 'fsl,mpc5121-localbus'
+	 * should have two address cells and one size cell.
+	 * Every item of its ranges property should consist of:
+	 * - the first address cell which is the chipselect number;
+	 * - the second address cell which is the offset in the chipselect,
+	 *    must be zero.
+	 * - CPU address of the beginning of an access window;
+	 * - the only size cell which is the size of an access window.
+	 */
+	addr_cells_p = of_get_property(lb_node, "#address-cells", NULL);
+	size_cells_p = of_get_property(lb_node, "#size-cells", NULL);
+	if (addr_cells_p == NULL || *addr_cells_p != 2 ||
+				size_cells_p == NULL ||	*size_cells_p != 1) {
+		goto end;
+	}
+
+	proplen = of_property_count_u32_elems(lb_node, "ranges");
+	if (proplen <= 0 || proplen % 4 != 0)
+		goto end;
+
+	lpbfifo.cs_n = proplen / 4;
+	lpbfifo.cs_ranges = devm_kcalloc(dev, lpbfifo.cs_n,
+					sizeof(struct cs_range), GFP_KERNEL);
+	if (!lpbfifo.cs_ranges)
+		goto end;
+
+	if (of_property_read_u32_array(lb_node, "ranges",
+				(u32 *)lpbfifo.cs_ranges, proplen) != 0) {
+		goto end;
+	}
+
+	for (i = 0; i < lpbfifo.cs_n; i++) {
+		if (lpbfifo.cs_ranges[i].base != 0)
+			goto end;
+	}
+
+	ret = 0;
+
+ end:
+	of_node_put(lb_node);
+	return ret;
+}
+
+static int mpc512x_lpbfifo_probe(struct platform_device *pdev)
+{
+	struct resource r;
+	int ret = 0;
+
+	memset(&lpbfifo, 0, sizeof(struct lpbfifo_data));
+	spin_lock_init(&lpbfifo.lock);
+
+	lpbfifo.chan = dma_request_chan(&pdev->dev, "rx-tx");
+	if (IS_ERR(lpbfifo.chan))
+		return PTR_ERR(lpbfifo.chan);
+
+	if (of_address_to_resource(pdev->dev.of_node, 0, &r) != 0) {
+		dev_err(&pdev->dev, "bad 'reg' in 'sclpc' device tree node\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	lpbfifo.regs_phys = r.start;
+	lpbfifo.regs_size = resource_size(&r);
+
+	if (!devm_request_mem_region(&pdev->dev, lpbfifo.regs_phys,
+					lpbfifo.regs_size, DRV_NAME)) {
+		dev_err(&pdev->dev, "unable to request region\n");
+		ret = -EBUSY;
+		goto err0;
+	}
+
+	lpbfifo.regs = devm_ioremap(&pdev->dev,
+					lpbfifo.regs_phys, lpbfifo.regs_size);
+	if (!lpbfifo.regs) {
+		dev_err(&pdev->dev, "mapping registers failed\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	out_be32(&lpbfifo.regs->enable,
+				MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+
+	if (get_cs_ranges(&pdev->dev) != 0) {
+		dev_err(&pdev->dev, "bad '/localbus' device tree node\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	lpbfifo.irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (!lpbfifo.irq) {
+		dev_err(&pdev->dev, "mapping irq failed\n");
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	if (request_irq(lpbfifo.irq, mpc512x_lpbfifo_irq, 0,
+						DRV_NAME, &pdev->dev) != 0) {
+		dev_err(&pdev->dev, "requesting irq failed\n");
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	dev_info(&pdev->dev, "probe succeeded\n");
+	return 0;
+
+ err1:
+	irq_dispose_mapping(lpbfifo.irq);
+ err0:
+	dma_release_channel(lpbfifo.chan);
+	return ret;
+}
+
+static int mpc512x_lpbfifo_remove(struct platform_device *pdev)
+{
+	unsigned long flags;
+	struct dma_device *dma_dev = lpbfifo.chan->device;
+	struct mpc512x_lpbfifo __iomem *regs = NULL;
+
+	spin_lock_irqsave(&lpbfifo.lock, flags);
+	regs = lpbfifo.regs;
+	lpbfifo.regs = NULL;
+	spin_unlock_irqrestore(&lpbfifo.lock, flags);
+
+	dma_dev->device_terminate_all(lpbfifo.chan);
+	out_be32(&regs->enable, MPC512X_SCLPC_RESET | MPC512X_SCLPC_FIFO_RESET);
+
+	free_irq(lpbfifo.irq, &pdev->dev);
+	irq_dispose_mapping(lpbfifo.irq);
+	dma_release_channel(lpbfifo.chan);
+
+	return 0;
+}
+
+static const struct of_device_id mpc512x_lpbfifo_match[] = {
+	{ .compatible = "fsl,mpc512x-lpbfifo", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc512x_lpbfifo_match);
+
+static struct platform_driver mpc512x_lpbfifo_driver = {
+	.probe = mpc512x_lpbfifo_probe,
+	.remove = mpc512x_lpbfifo_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = mpc512x_lpbfifo_match,
+	},
+};
+
+module_platform_driver(mpc512x_lpbfifo_driver);
+
+MODULE_AUTHOR("Alexander Popov <alex.popov@linux.com>");
+MODULE_DESCRIPTION("MPC512x LocalPlus Bus FIFO device driver");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
new file mode 100644
index 000000000..5ac0ead25
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC512x Shared code
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/fsl-diu-fb.h>
+#include <linux/memblock.h>
+#include <sysdev/fsl_soc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/time.h>
+#include <asm/mpc5121.h>
+#include <asm/mpc52xx_psc.h>
+
+#include "mpc512x.h"
+
+static struct mpc512x_reset_module __iomem *reset_module_base;
+
+static void __init mpc512x_restart_init(void)
+{
+	struct device_node *np;
+	const char *reset_compat;
+
+	reset_compat = mpc512x_select_reset_compat();
+	np = of_find_compatible_node(NULL, NULL, reset_compat);
+	if (!np)
+		return;
+
+	reset_module_base = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+void __noreturn mpc512x_restart(char *cmd)
+{
+	if (reset_module_base) {
+		/* Enable software reset "RSTE" */
+		out_be32(&reset_module_base->rpr, 0x52535445);
+		/* Set software hard reset */
+		out_be32(&reset_module_base->rcr, 0x2);
+	} else {
+		pr_err("Restart module not mapped.\n");
+	}
+	for (;;)
+		;
+}
+
+struct fsl_diu_shared_fb {
+	u8		gamma[0x300];	/* 32-bit aligned! */
+	struct diu_ad	ad0;		/* 32-bit aligned! */
+	phys_addr_t	fb_phys;
+	size_t		fb_len;
+	bool		in_use;
+};
+
+/* receives a pixel clock spec in pico seconds, adjusts the DIU clock rate */
+static void mpc512x_set_pixel_clock(unsigned int pixclock)
+{
+	struct device_node *np;
+	struct clk *clk_diu;
+	unsigned long epsilon, minpixclock, maxpixclock;
+	unsigned long offset, want, got, delta;
+
+	/* lookup and enable the DIU clock */
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu");
+	if (!np) {
+		pr_err("Could not find DIU device tree node.\n");
+		return;
+	}
+	clk_diu = of_clk_get(np, 0);
+	if (IS_ERR(clk_diu)) {
+		/* backwards compat with device trees that lack clock specs */
+		clk_diu = clk_get_sys(np->name, "ipg");
+	}
+	of_node_put(np);
+	if (IS_ERR(clk_diu)) {
+		pr_err("Could not lookup DIU clock.\n");
+		return;
+	}
+	if (clk_prepare_enable(clk_diu)) {
+		pr_err("Could not enable DIU clock.\n");
+		return;
+	}
+
+	/*
+	 * convert the picoseconds spec into the desired clock rate,
+	 * determine the acceptable clock range for the monitor (+/- 5%),
+	 * do the calculation in steps to avoid integer overflow
+	 */
+	pr_debug("DIU pixclock in ps - %u\n", pixclock);
+	pixclock = (1000000000 / pixclock) * 1000;
+	pr_debug("DIU pixclock freq  - %u\n", pixclock);
+	epsilon = pixclock / 20; /* pixclock * 0.05 */
+	pr_debug("DIU deviation      - %lu\n", epsilon);
+	minpixclock = pixclock - epsilon;
+	maxpixclock = pixclock + epsilon;
+	pr_debug("DIU minpixclock    - %lu\n", minpixclock);
+	pr_debug("DIU maxpixclock    - %lu\n", maxpixclock);
+
+	/*
+	 * check whether the DIU supports the desired pixel clock
+	 *
+	 * - simply request the desired clock and see what the
+	 *   platform's clock driver will make of it, assuming that it
+	 *   will setup the best approximation of the requested value
+	 * - try other candidate frequencies in the order of decreasing
+	 *   preference (i.e. with increasing distance from the desired
+	 *   pixel clock, and checking the lower frequency before the
+	 *   higher frequency to not overload the hardware) until the
+	 *   first match is found -- any potential subsequent match
+	 *   would only be as good as the former match or typically
+	 *   would be less preferrable
+	 *
+	 * the offset increment of pixelclock divided by 64 is an
+	 * arbitrary choice -- it's simple to calculate, in the typical
+	 * case we expect the first check to succeed already, in the
+	 * worst case seven frequencies get tested (the exact center and
+	 * three more values each to the left and to the right) before
+	 * the 5% tolerance window is exceeded, resulting in fast enough
+	 * execution yet high enough probability of finding a suitable
+	 * value, while the error rate will be in the order of single
+	 * percents
+	 */
+	for (offset = 0; offset <= epsilon; offset += pixclock / 64) {
+		want = pixclock - offset;
+		pr_debug("DIU checking clock - %lu\n", want);
+		clk_set_rate(clk_diu, want);
+		got = clk_get_rate(clk_diu);
+		delta = abs(pixclock - got);
+		if (delta < epsilon)
+			break;
+		if (!offset)
+			continue;
+		want = pixclock + offset;
+		pr_debug("DIU checking clock - %lu\n", want);
+		clk_set_rate(clk_diu, want);
+		got = clk_get_rate(clk_diu);
+		delta = abs(pixclock - got);
+		if (delta < epsilon)
+			break;
+	}
+	if (offset <= epsilon) {
+		pr_debug("DIU clock accepted - %lu\n", want);
+		pr_debug("DIU pixclock want %u, got %lu, delta %lu, eps %lu\n",
+			 pixclock, got, delta, epsilon);
+		return;
+	}
+	pr_warn("DIU pixclock auto search unsuccessful\n");
+
+	/*
+	 * what is the most appropriate action to take when the search
+	 * for an available pixel clock which is acceptable to the
+	 * monitor has failed?  disable the DIU (clock) or just provide
+	 * a "best effort"?  we go with the latter
+	 */
+	pr_warn("DIU pixclock best effort fallback (backend's choice)\n");
+	clk_set_rate(clk_diu, pixclock);
+	got = clk_get_rate(clk_diu);
+	delta = abs(pixclock - got);
+	pr_debug("DIU pixclock want %u, got %lu, delta %lu, eps %lu\n",
+		 pixclock, got, delta, epsilon);
+}
+
+static enum fsl_diu_monitor_port
+mpc512x_valid_monitor_port(enum fsl_diu_monitor_port port)
+{
+	return FSL_DIU_PORT_DVI;
+}
+
+static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb;
+
+static inline void mpc512x_free_bootmem(struct page *page)
+{
+	BUG_ON(PageTail(page));
+	BUG_ON(page_ref_count(page) > 1);
+	free_reserved_page(page);
+}
+
+static void mpc512x_release_bootmem(void)
+{
+	unsigned long addr = diu_shared_fb.fb_phys & PAGE_MASK;
+	unsigned long size = diu_shared_fb.fb_len;
+	unsigned long start, end;
+
+	if (diu_shared_fb.in_use) {
+		start = PFN_UP(addr);
+		end = PFN_DOWN(addr + size);
+
+		for (; start < end; start++)
+			mpc512x_free_bootmem(pfn_to_page(start));
+
+		diu_shared_fb.in_use = false;
+	}
+	diu_ops.release_bootmem	= NULL;
+}
+
+/*
+ * Check if DIU was pre-initialized. If so, perform steps
+ * needed to continue displaying through the whole boot process.
+ * Move area descriptor and gamma table elsewhere, they are
+ * destroyed by bootmem allocator otherwise. The frame buffer
+ * address range will be reserved in setup_arch() after bootmem
+ * allocator is up.
+ */
+static void __init mpc512x_init_diu(void)
+{
+	struct device_node *np;
+	struct diu __iomem *diu_reg;
+	phys_addr_t desc;
+	void __iomem *vaddr;
+	unsigned long mode, pix_fmt, res, bpp;
+	unsigned long dst;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu");
+	if (!np) {
+		pr_err("No DIU node\n");
+		return;
+	}
+
+	diu_reg = of_iomap(np, 0);
+	of_node_put(np);
+	if (!diu_reg) {
+		pr_err("Can't map DIU\n");
+		return;
+	}
+
+	mode = in_be32(&diu_reg->diu_mode);
+	if (mode == MFB_MODE0) {
+		pr_info("%s: DIU OFF\n", __func__);
+		goto out;
+	}
+
+	desc = in_be32(&diu_reg->desc[0]);
+	vaddr = ioremap(desc, sizeof(struct diu_ad));
+	if (!vaddr) {
+		pr_err("Can't map DIU area desc.\n");
+		goto out;
+	}
+	memcpy(&diu_shared_fb.ad0, vaddr, sizeof(struct diu_ad));
+	/* flush fb area descriptor */
+	dst = (unsigned long)&diu_shared_fb.ad0;
+	flush_dcache_range(dst, dst + sizeof(struct diu_ad) - 1);
+
+	res = in_be32(&diu_reg->disp_size);
+	pix_fmt = in_le32(vaddr);
+	bpp = ((pix_fmt >> 16) & 0x3) + 1;
+	diu_shared_fb.fb_phys = in_le32(vaddr + 4);
+	diu_shared_fb.fb_len = ((res & 0xfff0000) >> 16) * (res & 0xfff) * bpp;
+	diu_shared_fb.in_use = true;
+	iounmap(vaddr);
+
+	desc = in_be32(&diu_reg->gamma);
+	vaddr = ioremap(desc, sizeof(diu_shared_fb.gamma));
+	if (!vaddr) {
+		pr_err("Can't map DIU area desc.\n");
+		diu_shared_fb.in_use = false;
+		goto out;
+	}
+	memcpy(&diu_shared_fb.gamma, vaddr, sizeof(diu_shared_fb.gamma));
+	/* flush gamma table */
+	dst = (unsigned long)&diu_shared_fb.gamma;
+	flush_dcache_range(dst, dst + sizeof(diu_shared_fb.gamma) - 1);
+
+	iounmap(vaddr);
+	out_be32(&diu_reg->gamma, virt_to_phys(&diu_shared_fb.gamma));
+	out_be32(&diu_reg->desc[1], 0);
+	out_be32(&diu_reg->desc[2], 0);
+	out_be32(&diu_reg->desc[0], virt_to_phys(&diu_shared_fb.ad0));
+
+out:
+	iounmap(diu_reg);
+}
+
+static void __init mpc512x_setup_diu(void)
+{
+	int ret;
+
+	/*
+	 * We do not allocate and configure new area for bitmap buffer
+	 * because it would require copying bitmap data (splash image)
+	 * and so negatively affect boot time. Instead we reserve the
+	 * already configured frame buffer area so that it won't be
+	 * destroyed. The starting address of the area to reserve and
+	 * also it's length is passed to memblock_reserve(). It will be
+	 * freed later on first open of fbdev, when splash image is not
+	 * needed any more.
+	 */
+	if (diu_shared_fb.in_use) {
+		ret = memblock_reserve(diu_shared_fb.fb_phys,
+				       diu_shared_fb.fb_len);
+		if (ret) {
+			pr_err("%s: reserve bootmem failed\n", __func__);
+			diu_shared_fb.in_use = false;
+		}
+	}
+
+	diu_ops.set_pixel_clock		= mpc512x_set_pixel_clock;
+	diu_ops.valid_monitor_port	= mpc512x_valid_monitor_port;
+	diu_ops.release_bootmem		= mpc512x_release_bootmem;
+}
+
+void __init mpc512x_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+	of_node_put(np);
+
+	/*
+	 * Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+/*
+ * Nodes to do bus probe on, soc and localbus
+ */
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .compatible = "fsl,mpc5121-immr", },
+	{ .compatible = "fsl,mpc5121-localbus", },
+	{ .compatible = "fsl,mpc5121-mbx", },
+	{ .compatible = "fsl,mpc5121-nfc", },
+	{ .compatible = "fsl,mpc5121-sram", },
+	{ .compatible = "fsl,mpc5121-pci", },
+	{ .compatible = "gpio-leds", },
+	{},
+};
+
+static void __init mpc512x_declare_of_platform_devices(void)
+{
+	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
+		printk(KERN_ERR __FILE__ ": "
+			"Error while probing of_platform bus\n");
+}
+
+#define DEFAULT_FIFO_SIZE 16
+
+const char *__init mpc512x_select_psc_compat(void)
+{
+	if (of_machine_is_compatible("fsl,mpc5121"))
+		return "fsl,mpc5121-psc";
+
+	if (of_machine_is_compatible("fsl,mpc5125"))
+		return "fsl,mpc5125-psc";
+
+	return NULL;
+}
+
+const char *__init mpc512x_select_reset_compat(void)
+{
+	if (of_machine_is_compatible("fsl,mpc5121"))
+		return "fsl,mpc5121-reset";
+
+	if (of_machine_is_compatible("fsl,mpc5125"))
+		return "fsl,mpc5125-reset";
+
+	return NULL;
+}
+
+static unsigned int __init get_fifo_size(struct device_node *np,
+					 char *prop_name)
+{
+	const unsigned int *fp;
+
+	fp = of_get_property(np, prop_name, NULL);
+	if (fp)
+		return *fp;
+
+	pr_warn("no %s property in %pOF node, defaulting to %d\n",
+		prop_name, np, DEFAULT_FIFO_SIZE);
+
+	return DEFAULT_FIFO_SIZE;
+}
+
+#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \
+		    ((u32)(_base) + sizeof(struct mpc52xx_psc)))
+
+/* Init PSC FIFO space for TX and RX slices */
+static void __init mpc512x_psc_fifo_init(void)
+{
+	struct device_node *np;
+	void __iomem *psc;
+	unsigned int tx_fifo_size;
+	unsigned int rx_fifo_size;
+	const char *psc_compat;
+	int fifobase = 0; /* current fifo address in 32 bit words */
+
+	psc_compat = mpc512x_select_psc_compat();
+	if (!psc_compat) {
+		pr_err("%s: no compatible devices found\n", __func__);
+		return;
+	}
+
+	for_each_compatible_node(np, NULL, psc_compat) {
+		tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size");
+		rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size");
+
+		/* size in register is in 4 byte units */
+		tx_fifo_size /= 4;
+		rx_fifo_size /= 4;
+		if (!tx_fifo_size)
+			tx_fifo_size = 1;
+		if (!rx_fifo_size)
+			rx_fifo_size = 1;
+
+		psc = of_iomap(np, 0);
+		if (!psc) {
+			pr_err("%s: Can't map %pOF device\n",
+				__func__, np);
+			continue;
+		}
+
+		/* FIFO space is 4KiB, check if requested size is available */
+		if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) {
+			pr_err("%s: no fifo space available for %pOF\n",
+				__func__, np);
+			iounmap(psc);
+			/*
+			 * chances are that another device requests less
+			 * fifo space, so we continue.
+			 */
+			continue;
+		}
+
+		/* set tx and rx fifo size registers */
+		out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size);
+		fifobase += tx_fifo_size;
+		out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size);
+		fifobase += rx_fifo_size;
+
+		/* reset and enable the slices */
+		out_be32(&FIFOC(psc)->txcmd, 0x80);
+		out_be32(&FIFOC(psc)->txcmd, 0x01);
+		out_be32(&FIFOC(psc)->rxcmd, 0x80);
+		out_be32(&FIFOC(psc)->rxcmd, 0x01);
+
+		iounmap(psc);
+	}
+}
+
+void __init mpc512x_init_early(void)
+{
+	mpc512x_restart_init();
+	if (IS_ENABLED(CONFIG_FB_FSL_DIU))
+		mpc512x_init_diu();
+}
+
+void __init mpc512x_init(void)
+{
+	mpc5121_clk_init();
+	mpc512x_declare_of_platform_devices();
+	mpc512x_psc_fifo_init();
+}
+
+void __init mpc512x_setup_arch(void)
+{
+	if (IS_ENABLED(CONFIG_FB_FSL_DIU))
+		mpc512x_setup_diu();
+}
+
+/**
+ * mpc512x_cs_config - Setup chip select configuration
+ * @cs: chip select number
+ * @val: chip select configuration value
+ *
+ * Perform chip select configuration for devices on LocalPlus Bus.
+ * Intended to dynamically reconfigure the chip select parameters
+ * for configurable devices on the bus.
+ */
+int mpc512x_cs_config(unsigned int cs, u32 val)
+{
+	static struct mpc512x_lpc __iomem *lpc;
+	struct device_node *np;
+
+	if (cs > 7)
+		return -EINVAL;
+
+	if (!lpc) {
+		np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-lpc");
+		lpc = of_iomap(np, 0);
+		of_node_put(np);
+		if (!lpc)
+			return -ENOMEM;
+	}
+
+	out_be32(&lpc->cs_cfg[cs], val);
+	return 0;
+}
+EXPORT_SYMBOL(mpc512x_cs_config);
diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c
new file mode 100644
index 000000000..1e911f426
--- /dev/null
+++ b/arch/powerpc/platforms/512x/pdm360ng.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2010 DENX Software Engineering
+ *
+ * Anatolij Gustschin, <agust@denx.de>
+ *
+ * PDM360NG board setup
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+
+#include "mpc512x.h"
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+    defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#include <linux/interrupt.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/spi.h>
+#include <linux/notifier.h>
+
+static void *pdm360ng_gpio_base;
+
+static int pdm360ng_get_pendown_state(void)
+{
+	u32 reg;
+
+	reg = in_be32(pdm360ng_gpio_base + 0xc);
+	if (reg & 0x40)
+		setbits32(pdm360ng_gpio_base + 0xc, 0x40);
+
+	reg = in_be32(pdm360ng_gpio_base + 0x8);
+
+	/* return 1 if pen is down */
+	return (reg & 0x40) == 0;
+}
+
+static struct ads7846_platform_data pdm360ng_ads7846_pdata = {
+	.model			= 7845,
+	.get_pendown_state	= pdm360ng_get_pendown_state,
+	.irq_flags		= IRQF_TRIGGER_LOW,
+};
+
+static int __init pdm360ng_penirq_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio");
+	if (!np) {
+		pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__);
+		return -ENODEV;
+	}
+
+	pdm360ng_gpio_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!pdm360ng_gpio_base) {
+		pr_err("%s: Can't map gpio regs.\n", __func__);
+		return -ENODEV;
+	}
+	out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff);
+	setbits32(pdm360ng_gpio_base + 0x18, 0x2000);
+	setbits32(pdm360ng_gpio_base + 0x10, 0x40);
+
+	return 0;
+}
+
+static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb,
+					unsigned long event, void *__dev)
+{
+	struct device *dev = __dev;
+
+	if ((event == BUS_NOTIFY_ADD_DEVICE) &&
+	    of_device_is_compatible(dev->of_node, "ti,ads7846")) {
+		dev->platform_data = &pdm360ng_ads7846_pdata;
+		return NOTIFY_OK;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block pdm360ng_touchscreen_nb = {
+	.notifier_call = pdm360ng_touchscreen_notifier_call,
+};
+
+static void __init pdm360ng_touchscreen_init(void)
+{
+	if (pdm360ng_penirq_init())
+		return;
+
+	bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb);
+}
+#else
+static inline void __init pdm360ng_touchscreen_init(void)
+{
+}
+#endif /* CONFIG_TOUCHSCREEN_ADS7846 */
+
+void __init pdm360ng_init(void)
+{
+	mpc512x_init();
+	pdm360ng_touchscreen_init();
+}
+
+static int __init pdm360ng_probe(void)
+{
+	if (!of_machine_is_compatible("ifm,pdm360ng"))
+		return 0;
+
+	mpc512x_init_early();
+
+	return 1;
+}
+
+define_machine(pdm360ng) {
+	.name			= "PDM360NG",
+	.probe			= pdm360ng_probe,
+	.setup_arch		= mpc512x_setup_arch,
+	.init			= pdm360ng_init,
+	.init_IRQ		= mpc512x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
+};