Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 251 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
new file mode 100644
index 000000000..e2a13a052
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale 83xx USB SOC setup code
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Author: Li Yang
+ */
+
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/io.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+
+#ifdef CONFIG_PPC_MPC834x
+int __init mpc834x_usb_cfg(void)
+{
+	unsigned long sccr, sicrl, sicrh;
+	void __iomem *immap;
+	struct device_node *np = NULL;
+	int port0_is_dr = 0, port1_is_dr = 0;
+	const void *prop, *dr_mode;
+
+	immap = ioremap(get_immrbase(), 0x1000);
+	if (!immap)
+		return -ENOMEM;
+
+	/* Read registers */
+	/* Note: DR and MPH must use the same clock setting in SCCR */
+	sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK;
+	sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
+	sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+	if (np) {
+		sccr |= MPC83XX_SCCR_USB_DRCM_11;  /* 1:3 */
+
+		prop = of_get_property(np, "phy_type", NULL);
+		port1_is_dr = 1;
+		if (prop && (!strcmp(prop, "utmi") ||
+					!strcmp(prop, "utmi_wide"))) {
+			sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
+			sicrh |= MPC834X_SICRH_USB_UTMI;
+			port0_is_dr = 1;
+		} else if (prop && !strcmp(prop, "serial")) {
+			dr_mode = of_get_property(np, "dr_mode", NULL);
+			if (dr_mode && !strcmp(dr_mode, "otg")) {
+				sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
+				port0_is_dr = 1;
+			} else {
+				sicrl |= MPC834X_SICRL_USB1;
+			}
+		} else if (prop && !strcmp(prop, "ulpi")) {
+			sicrl |= MPC834X_SICRL_USB1;
+		} else {
+			printk(KERN_WARNING "834x USB PHY type not supported\n");
+		}
+		of_node_put(np);
+	}
+	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
+	if (np) {
+		sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
+
+		prop = of_get_property(np, "port0", NULL);
+		if (prop) {
+			if (port0_is_dr)
+				printk(KERN_WARNING
+					"834x USB port0 can't be used by both DR and MPH!\n");
+			sicrl &= ~MPC834X_SICRL_USB0;
+		}
+		prop = of_get_property(np, "port1", NULL);
+		if (prop) {
+			if (port1_is_dr)
+				printk(KERN_WARNING
+					"834x USB port1 can't be used by both DR and MPH!\n");
+			sicrl &= ~MPC834X_SICRL_USB1;
+		}
+		of_node_put(np);
+	}
+
+	/* Write back */
+	out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
+	out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
+	out_be32(immap + MPC83XX_SICRH_OFFS, sicrh);
+
+	iounmap(immap);
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC834x */
+
+#ifdef CONFIG_PPC_MPC831x
+int __init mpc831x_usb_cfg(void)
+{
+	u32 temp;
+	void __iomem *immap, *usb_regs;
+	struct device_node *np = NULL;
+	struct device_node *immr_node = NULL;
+	const void *prop;
+	struct resource res;
+	int ret = 0;
+#ifdef CONFIG_USB_OTG
+	const void *dr_mode;
+#endif
+
+	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+	if (!np)
+		return -ENODEV;
+	prop = of_get_property(np, "phy_type", NULL);
+
+	/* Map IMMR space for pin and clock settings */
+	immap = ioremap(get_immrbase(), 0x1000);
+	if (!immap) {
+		of_node_put(np);
+		return -ENOMEM;
+	}
+
+	/* Configure clock */
+	immr_node = of_get_parent(np);
+	if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") ||
+			of_device_is_compatible(immr_node, "fsl,mpc8308-immr")))
+		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+		                MPC8315_SCCR_USB_MASK,
+		                MPC8315_SCCR_USB_DRCM_01);
+	else
+		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+		                MPC83XX_SCCR_USB_MASK,
+		                MPC83XX_SCCR_USB_DRCM_11);
+
+	/* Configure pin mux for ULPI.  There is no pin mux for UTMI */
+	if (prop && !strcmp(prop, "ulpi")) {
+		if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC8308_SICRH_USB_MASK,
+					MPC8308_SICRH_USB_ULPI);
+		} else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC8315_SICRL_USB_MASK,
+					MPC8315_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC8315_SICRH_USB_MASK,
+					MPC8315_SICRH_USB_ULPI);
+		} else {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC831X_SICRL_USB_MASK,
+					MPC831X_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC831X_SICRH_USB_MASK,
+					MPC831X_SICRH_USB_ULPI);
+		}
+	}
+
+	iounmap(immap);
+
+	of_node_put(immr_node);
+
+	/* Map USB SOC space */
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret) {
+		of_node_put(np);
+		return ret;
+	}
+	usb_regs = ioremap(res.start, resource_size(&res));
+
+	/* Using on-chip PHY */
+	if (prop && (!strcmp(prop, "utmi_wide") ||
+		     !strcmp(prop, "utmi"))) {
+		u32 refsel;
+
+		if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))
+			goto out;
+
+		if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+			refsel = CONTROL_REFSEL_24MHZ;
+		else
+			refsel = CONTROL_REFSEL_48MHZ;
+		/* Set UTMI_PHY_EN and REFSEL */
+		out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
+				CONTROL_UTMI_PHY_EN | refsel);
+	/* Using external UPLI PHY */
+	} else if (prop && !strcmp(prop, "ulpi")) {
+		/* Set PHY_CLK_SEL to ULPI */
+		temp = CONTROL_PHY_CLK_SEL_ULPI;
+#ifdef CONFIG_USB_OTG
+		/* Set OTG_PORT */
+		if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
+			dr_mode = of_get_property(np, "dr_mode", NULL);
+			if (dr_mode && !strcmp(dr_mode, "otg"))
+				temp |= CONTROL_OTG_PORT;
+		}
+#endif /* CONFIG_USB_OTG */
+		out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp);
+	} else {
+		printk(KERN_WARNING "831x USB PHY type not supported\n");
+		ret = -EINVAL;
+	}
+
+out:
+	iounmap(usb_regs);
+	of_node_put(np);
+	return ret;
+}
+#endif /* CONFIG_PPC_MPC831x */
+
+#ifdef CONFIG_PPC_MPC837x
+int __init mpc837x_usb_cfg(void)
+{
+	void __iomem *immap;
+	struct device_node *np = NULL;
+	const void *prop;
+	int ret = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+	if (!np || !of_device_is_available(np)) {
+		of_node_put(np);
+		return -ENODEV;
+	}
+	prop = of_get_property(np, "phy_type", NULL);
+
+	if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
+		printk(KERN_WARNING "837x USB PHY type not supported\n");
+		of_node_put(np);
+		return -EINVAL;
+	}
+
+	/* Map IMMR space for pin and clock settings */
+	immap = ioremap(get_immrbase(), 0x1000);
+	if (!immap) {
+		of_node_put(np);
+		return -ENOMEM;
+	}
+
+	/* Configure clock */
+	clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
+			MPC837X_SCCR_USB_DRCM_11);
+
+	/* Configure pin mux for ULPI/serial */
+	clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
+			MPC837X_SICRL_USB_ULPI);
+
+	iounmap(immap);
+	of_node_put(np);
+	return ret;
+}
+#endif /* CONFIG_PPC_MPC837x */