Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 302 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
new file mode 100644
index 000000000..d41dad227
--- /dev/null
+++ b/arch/powerpc/platforms/Kconfig
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Platform support"
+
+source "arch/powerpc/platforms/powernv/Kconfig"
+source "arch/powerpc/platforms/pseries/Kconfig"
+source "arch/powerpc/platforms/chrp/Kconfig"
+source "arch/powerpc/platforms/512x/Kconfig"
+source "arch/powerpc/platforms/52xx/Kconfig"
+source "arch/powerpc/platforms/powermac/Kconfig"
+source "arch/powerpc/platforms/maple/Kconfig"
+source "arch/powerpc/platforms/pasemi/Kconfig"
+source "arch/powerpc/platforms/ps3/Kconfig"
+source "arch/powerpc/platforms/cell/Kconfig"
+source "arch/powerpc/platforms/8xx/Kconfig"
+source "arch/powerpc/platforms/82xx/Kconfig"
+source "arch/powerpc/platforms/83xx/Kconfig"
+source "arch/powerpc/platforms/85xx/Kconfig"
+source "arch/powerpc/platforms/86xx/Kconfig"
+source "arch/powerpc/platforms/embedded6xx/Kconfig"
+source "arch/powerpc/platforms/44x/Kconfig"
+source "arch/powerpc/platforms/40x/Kconfig"
+source "arch/powerpc/platforms/amigaone/Kconfig"
+source "arch/powerpc/platforms/book3s/Kconfig"
+source "arch/powerpc/platforms/microwatt/Kconfig"
+
+config KVM_GUEST
+	bool "KVM Guest support"
+	select EPAPR_PARAVIRT
+	help
+	  This option enables various optimizations for running under the KVM
+	  hypervisor. Overhead for the kernel when not running inside KVM should
+	  be minimal.
+
+	  In case of doubt, say Y
+
+config EPAPR_PARAVIRT
+	bool "ePAPR para-virtualization support"
+	help
+	  Enables ePAPR para-virtualization support for guests.
+
+	  In case of doubt, say Y
+
+config PPC_HASH_MMU_NATIVE
+	bool
+	depends on PPC_BOOK3S
+	help
+	  Support for running natively on the hardware, i.e. without
+	  a hypervisor. This option is not user-selectable but should
+	  be selected by all platforms that need it.
+
+config PPC_OF_BOOT_TRAMPOLINE
+	bool "Support booting from Open Firmware or yaboot"
+	depends on PPC_BOOK3S_32 || PPC64
+	select RELOCATABLE if PPC64
+	default y
+	help
+	  Support from booting from Open Firmware or yaboot using an
+	  Open Firmware client interface. This enables the kernel to
+	  communicate with open firmware to retrieve system information
+	  such as the device tree.
+
+	  In case of doubt, say Y
+
+config PPC_DT_CPU_FTRS
+	bool "Device-tree based CPU feature discovery & setup"
+	depends on PPC_BOOK3S_64
+	default y
+	help
+	  This enables code to use a new device tree binding for describing CPU
+	  compatibility and features. Saying Y here will attempt to use the new
+	  binding if the firmware provides it. Currently only the skiboot
+	  firmware provides this binding.
+	  If you're not sure say Y.
+
+config UDBG_RTAS_CONSOLE
+	bool "RTAS based debug console"
+	depends on PPC_RTAS
+
+config PPC_SMP_MUXED_IPI
+	bool
+	help
+	  Select this option if your platform supports SMP and your
+	  interrupt controller provides less than 4 interrupts to each
+	  cpu.	This will enable the generic code to multiplex the 4
+	  messages on to one ipi.
+
+config IPIC
+	bool
+
+config MPIC
+	bool
+
+config MPIC_TIMER
+	bool "MPIC Global Timer"
+	depends on MPIC && FSL_SOC
+	help
+	  The MPIC global timer is a hardware timer inside the
+	  Freescale PIC complying with OpenPIC standard. When the
+	  specified interval times out, the hardware timer generates
+	  an interrupt. The driver currently is only tested on fsl
+	  chip, but it can potentially support other global timers
+	  complying with the OpenPIC standard.
+
+config FSL_MPIC_TIMER_WAKEUP
+	tristate "Freescale MPIC global timer wakeup driver"
+	depends on FSL_SOC &&  MPIC_TIMER && PM
+	help
+	  The driver provides a way to wake up the system by MPIC
+	  timer.
+	  e.g. "echo 5 > /sys/devices/system/mpic/timer_wakeup"
+
+config PPC_EPAPR_HV_PIC
+	bool
+	select EPAPR_PARAVIRT
+
+config MPIC_WEIRD
+	bool
+
+config MPIC_MSGR
+	bool "MPIC message register support"
+	depends on MPIC
+	help
+	  Enables support for the MPIC message registers.  These
+	  registers are used for inter-processor communication.
+
+config PPC_I8259
+	bool
+
+config U3_DART
+	bool
+	depends on PPC64
+
+config PPC_RTAS
+	bool
+
+config RTAS_ERROR_LOGGING
+	bool
+	depends on PPC_RTAS
+
+config PPC_RTAS_DAEMON
+	bool
+	depends on PPC_RTAS
+
+config RTAS_PROC
+	bool "Proc interface to RTAS"
+	depends on PPC_RTAS && PROC_FS
+	default y
+
+config RTAS_FLASH
+	tristate "Firmware flash interface"
+	depends on PPC64 && RTAS_PROC
+
+config MMIO_NVRAM
+	bool
+
+config MPIC_U3_HT_IRQS
+	bool
+
+config MPIC_BROKEN_REGREAD
+	bool
+	depends on MPIC
+	help
+	  This option enables a MPIC driver workaround for some chips
+	  that have a bug that causes some interrupt source information
+	  to not read back properly. It is safe to use on other chips as
+	  well, but enabling it uses about 8KB of memory to keep copies
+	  of the register contents in software.
+
+config EEH
+	bool
+	depends on (PPC_POWERNV || PPC_PSERIES) && PCI
+	default y
+
+config PPC_MPC106
+	bool
+
+config PPC_970_NAP
+	bool
+
+config PPC_P7_NAP
+	bool
+
+config PPC_BOOK3S_IDLE
+	def_bool y
+	depends on (PPC_970_NAP || PPC_P7_NAP)
+
+config PPC_INDIRECT_PIO
+	bool
+	select GENERIC_IOMAP
+
+config PPC_INDIRECT_MMIO
+	bool
+
+config PPC_IO_WORKAROUNDS
+	bool
+
+source "drivers/cpufreq/Kconfig"
+
+menu "CPUIdle driver"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
+config TAU
+	bool "On-chip CPU temperature sensor support"
+	depends on PPC_BOOK3S_32
+	help
+	  G3 and G4 processors have an on-chip temperature sensor called the
+	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
+	  temperature within 2-4 degrees Celsius. This option shows the current
+	  on-die temperature in /proc/cpuinfo if the cpu supports it.
+
+	  Unfortunately, this sensor is very inaccurate when uncalibrated, so
+	  don't assume the cpu temp is actually what /proc/cpuinfo says it is.
+
+config TAU_INT
+	bool "Interrupt driven TAU driver (EXPERIMENTAL)"
+	depends on TAU
+	help
+	  The TAU supports an interrupt driven mode which causes an interrupt
+	  whenever the temperature goes out of range. This is the fastest way
+	  to get notified the temp has exceeded a range. With this option off,
+	  a timer is used to re-check the temperature periodically.
+
+	  If in doubt, say N here.
+
+config TAU_AVERAGE
+	bool "Average high and low temp"
+	depends on TAU
+	help
+	  The TAU hardware can compare the temperature to an upper and lower
+	  bound.  The default behavior is to show both the upper and lower
+	  bound in /proc/cpuinfo. If the range is large, the temperature is
+	  either changing a lot, or the TAU hardware is broken (likely on some
+	  G4's). If the range is small (around 4 degrees), the temperature is
+	  relatively stable.  If you say Y here, a single temperature value,
+	  halfway between the upper and lower bounds, will be reported in
+	  /proc/cpuinfo.
+
+	  If in doubt, say N here.
+
+config QE_GPIO
+	bool "QE GPIO support"
+	depends on QUICC_ENGINE
+	select GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  QE GPIOs.
+
+config CPM2
+	bool "Enable support for the CPM2 (Communications Processor Module)"
+	depends on (FSL_SOC_BOOKE && PPC32) || 8260
+	select CPM
+	select HAVE_PCI
+	select GPIOLIB
+	help
+	  The CPM2 (Communications Processor Module) is a coprocessor on
+	  embedded CPUs made by Freescale.  Selecting this option means that
+	  you wish to build a kernel for a machine with a CPM2 coprocessor
+	  on it (826x, 827x, 8560).
+
+config FSL_ULI1575
+	bool
+	select GENERIC_ISA_DMA
+	help
+	  Supports for the ULI1575 PCIe south bridge that exists on some
+	  Freescale reference boards. The boards all use the ULI in pretty
+	  much the same way.
+
+config CPM
+	bool
+	select GENERIC_ALLOCATOR
+
+config OF_RTC
+	bool
+	help
+	  Uses information from the OF or flattened device tree to instantiate
+	  platform devices for direct mapped RTC chips like the DS1742 or DS1743.
+
+config GEN_RTC
+	bool "Use the platform RTC operations from user space"
+	select RTC_CLASS
+	select RTC_DRV_GENERIC
+	help
+	  This option provides backwards compatibility with the old gen_rtc.ko
+	  module that was traditionally used for old PowerPC machines.
+	  Platforms should migrate to enabling the RTC_DRV_GENERIC by hand
+	  replacing their get_rtc_time/set_rtc_time callbacks with
+	  a proper RTC device driver.
+
+config MCU_MPC8349EMITX
+	bool "MPC8349E-mITX MCU driver"
+	depends on I2C=y && PPC_83xx
+	select GPIOLIB
+	help
+	  Say Y here to enable soft power-off functionality on the Freescale
+	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+	  also register MCU GPIOs with the generic GPIO API, so you'll able
+	  to use MCU pins as GPIOs.
+
+endmenu