Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1697 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
new file mode 100644
index 000000000..a83cb679d
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -0,0 +1,1697 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PowerNV Platform dependent EEH operations
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
+ */
+
+#include <linux/atomic.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/list.h>
+#include <linux/msi.h>
+#include <linux/of.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/rbtree.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/firmware.h>
+#include <asm/io.h>
+#include <asm/iommu.h>
+#include <asm/machdep.h>
+#include <asm/msi_bitmap.h>
+#include <asm/opal.h>
+#include <asm/ppc-pci.h>
+#include <asm/pnv-pci.h>
+
+#include "powernv.h"
+#include "pci.h"
+#include "../../../../drivers/pci/pci.h"
+
+static int eeh_event_irq = -EINVAL;
+
+static void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
+{
+	dev_dbg(&pdev->dev, "EEH: Setting up device\n");
+	eeh_probe_device(pdev);
+}
+
+static irqreturn_t pnv_eeh_event(int irq, void *data)
+{
+	/*
+	 * We simply send a special EEH event if EEH has been
+	 * enabled. We don't care about EEH events until we've
+	 * finished processing the outstanding ones. Event processing
+	 * gets unmasked in next_error() if EEH is enabled.
+	 */
+	disable_irq_nosync(irq);
+
+	if (eeh_enabled())
+		eeh_send_failure_event(NULL);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t pnv_eeh_ei_write(struct file *filp,
+				const char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	struct pci_controller *hose = filp->private_data;
+	struct eeh_pe *pe;
+	int pe_no, type, func;
+	unsigned long addr, mask;
+	char buf[50];
+	int ret;
+
+	if (!eeh_ops || !eeh_ops->err_inject)
+		return -ENXIO;
+
+	/* Copy over argument buffer */
+	ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
+	if (!ret)
+		return -EFAULT;
+
+	/* Retrieve parameters */
+	ret = sscanf(buf, "%x:%x:%x:%lx:%lx",
+		     &pe_no, &type, &func, &addr, &mask);
+	if (ret != 5)
+		return -EINVAL;
+
+	/* Retrieve PE */
+	pe = eeh_pe_get(hose, pe_no);
+	if (!pe)
+		return -ENODEV;
+
+	/* Do error injection */
+	ret = eeh_ops->err_inject(pe, type, func, addr, mask);
+	return ret < 0 ? ret : count;
+}
+
+static const struct file_operations pnv_eeh_ei_fops = {
+	.open	= simple_open,
+	.llseek	= no_llseek,
+	.write	= pnv_eeh_ei_write,
+};
+
+static int pnv_eeh_dbgfs_set(void *data, int offset, u64 val)
+{
+	struct pci_controller *hose = data;
+	struct pnv_phb *phb = hose->private_data;
+
+	out_be64(phb->regs + offset, val);
+	return 0;
+}
+
+static int pnv_eeh_dbgfs_get(void *data, int offset, u64 *val)
+{
+	struct pci_controller *hose = data;
+	struct pnv_phb *phb = hose->private_data;
+
+	*val = in_be64(phb->regs + offset);
+	return 0;
+}
+
+#define PNV_EEH_DBGFS_ENTRY(name, reg)				\
+static int pnv_eeh_dbgfs_set_##name(void *data, u64 val)	\
+{								\
+	return pnv_eeh_dbgfs_set(data, reg, val);		\
+}								\
+								\
+static int pnv_eeh_dbgfs_get_##name(void *data, u64 *val)	\
+{								\
+	return pnv_eeh_dbgfs_get(data, reg, val);		\
+}								\
+								\
+DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_dbgfs_ops_##name,		\
+			pnv_eeh_dbgfs_get_##name,		\
+                        pnv_eeh_dbgfs_set_##name,		\
+			"0x%llx\n")
+
+PNV_EEH_DBGFS_ENTRY(outb, 0xD10);
+PNV_EEH_DBGFS_ENTRY(inbA, 0xD90);
+PNV_EEH_DBGFS_ENTRY(inbB, 0xE10);
+
+#endif /* CONFIG_DEBUG_FS */
+
+static void pnv_eeh_enable_phbs(void)
+{
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+
+	list_for_each_entry(hose, &hose_list, list_node) {
+		phb = hose->private_data;
+		/*
+		 * If EEH is enabled, we're going to rely on that.
+		 * Otherwise, we restore to conventional mechanism
+		 * to clear frozen PE during PCI config access.
+		 */
+		if (eeh_enabled())
+			phb->flags |= PNV_PHB_FLAG_EEH;
+		else
+			phb->flags &= ~PNV_PHB_FLAG_EEH;
+	}
+}
+
+/**
+ * pnv_eeh_post_init - EEH platform dependent post initialization
+ *
+ * EEH platform dependent post initialization on powernv. When
+ * the function is called, the EEH PEs and devices should have
+ * been built. If the I/O cache staff has been built, EEH is
+ * ready to supply service.
+ */
+int pnv_eeh_post_init(void)
+{
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+	int ret = 0;
+
+	eeh_show_enabled();
+
+	/* Register OPAL event notifier */
+	eeh_event_irq = opal_event_request(ilog2(OPAL_EVENT_PCI_ERROR));
+	if (eeh_event_irq < 0) {
+		pr_err("%s: Can't register OPAL event interrupt (%d)\n",
+		       __func__, eeh_event_irq);
+		return eeh_event_irq;
+	}
+
+	ret = request_irq(eeh_event_irq, pnv_eeh_event,
+			  IRQ_TYPE_LEVEL_HIGH, "opal-eeh", NULL);
+	if (ret < 0) {
+		irq_dispose_mapping(eeh_event_irq);
+		pr_err("%s: Can't request OPAL event interrupt (%d)\n",
+		       __func__, eeh_event_irq);
+		return ret;
+	}
+
+	if (!eeh_enabled())
+		disable_irq(eeh_event_irq);
+
+	pnv_eeh_enable_phbs();
+
+	list_for_each_entry(hose, &hose_list, list_node) {
+		phb = hose->private_data;
+
+		/* Create debugfs entries */
+#ifdef CONFIG_DEBUG_FS
+		if (phb->has_dbgfs || !phb->dbgfs)
+			continue;
+
+		phb->has_dbgfs = 1;
+		debugfs_create_file("err_injct", 0200,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_ei_fops);
+
+		debugfs_create_file("err_injct_outbound", 0600,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_dbgfs_ops_outb);
+		debugfs_create_file("err_injct_inboundA", 0600,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_dbgfs_ops_inbA);
+		debugfs_create_file("err_injct_inboundB", 0600,
+				    phb->dbgfs, hose,
+				    &pnv_eeh_dbgfs_ops_inbB);
+#endif /* CONFIG_DEBUG_FS */
+	}
+
+	return ret;
+}
+
+static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
+{
+	int pos = PCI_CAPABILITY_LIST;
+	int cnt = 48;   /* Maximal number of capabilities */
+	u32 status, id;
+
+	if (!pdn)
+		return 0;
+
+	/* Check if the device supports capabilities */
+	pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	while (cnt--) {
+		pnv_pci_cfg_read(pdn, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+
+		pos &= ~3;
+		pnv_pci_cfg_read(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+
+		/* Found */
+		if (id == cap)
+			return pos;
+
+		/* Next one */
+		pos += PCI_CAP_LIST_NEXT;
+	}
+
+	return 0;
+}
+
+static int pnv_eeh_find_ecap(struct pci_dn *pdn, int cap)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	u32 header;
+	int pos = 256, ttl = (4096 - 256) / 8;
+
+	if (!edev || !edev->pcie_cap)
+		return 0;
+	if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+		return 0;
+	else if (!header)
+		return 0;
+
+	while (ttl-- > 0) {
+		if (PCI_EXT_CAP_ID(header) == cap && pos)
+			return pos;
+
+		pos = PCI_EXT_CAP_NEXT(header);
+		if (pos < 256)
+			break;
+
+		if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
+			break;
+	}
+
+	return 0;
+}
+
+static struct eeh_pe *pnv_eeh_get_upstream_pe(struct pci_dev *pdev)
+{
+	struct pci_controller *hose = pdev->bus->sysdata;
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dev *parent = pdev->bus->self;
+
+#ifdef CONFIG_PCI_IOV
+	/* for VFs we use the PF's PE as the upstream PE */
+	if (pdev->is_virtfn)
+		parent = pdev->physfn;
+#endif
+
+	/* otherwise use the PE of our parent bridge */
+	if (parent) {
+		struct pnv_ioda_pe *ioda_pe = pnv_ioda_get_pe(parent);
+
+		return eeh_pe_get(phb->hose, ioda_pe->pe_number);
+	}
+
+	return NULL;
+}
+
+/**
+ * pnv_eeh_probe - Do probe on PCI device
+ * @pdev: pci_dev to probe
+ *
+ * Create, or find the existing, eeh_dev for this pci_dev.
+ */
+static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev)
+{
+	struct pci_dn *pdn = pci_get_pdn(pdev);
+	struct pci_controller *hose = pdn->phb;
+	struct pnv_phb *phb = hose->private_data;
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	struct eeh_pe *upstream_pe;
+	uint32_t pcie_flags;
+	int ret;
+	int config_addr = (pdn->busno << 8) | (pdn->devfn);
+
+	/*
+	 * When probing the root bridge, which doesn't have any
+	 * subordinate PCI devices. We don't have OF node for
+	 * the root bridge. So it's not reasonable to continue
+	 * the probing.
+	 */
+	if (!edev || edev->pe)
+		return NULL;
+
+	/* already configured? */
+	if (edev->pdev) {
+		pr_debug("%s: found existing edev for %04x:%02x:%02x.%01x\n",
+			__func__, hose->global_number, config_addr >> 8,
+			PCI_SLOT(config_addr), PCI_FUNC(config_addr));
+		return edev;
+	}
+
+	/* Skip for PCI-ISA bridge */
+	if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
+		return NULL;
+
+	eeh_edev_dbg(edev, "Probing device\n");
+
+	/* Initialize eeh device */
+	edev->mode	&= 0xFFFFFF00;
+	edev->pcix_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
+	edev->pcie_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
+	edev->af_cap   = pnv_eeh_find_cap(pdn, PCI_CAP_ID_AF);
+	edev->aer_cap  = pnv_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
+	if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		edev->mode |= EEH_DEV_BRIDGE;
+		if (edev->pcie_cap) {
+			pnv_pci_cfg_read(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+					 2, &pcie_flags);
+			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+				edev->mode |= EEH_DEV_ROOT_PORT;
+			else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+				edev->mode |= EEH_DEV_DS_PORT;
+		}
+	}
+
+	edev->pe_config_addr = phb->ioda.pe_rmap[config_addr];
+
+	upstream_pe = pnv_eeh_get_upstream_pe(pdev);
+
+	/* Create PE */
+	ret = eeh_pe_tree_insert(edev, upstream_pe);
+	if (ret) {
+		eeh_edev_warn(edev, "Failed to add device to PE (code %d)\n", ret);
+		return NULL;
+	}
+
+	/*
+	 * If the PE contains any one of following adapters, the
+	 * PCI config space can't be accessed when dumping EEH log.
+	 * Otherwise, we will run into fenced PHB caused by shortage
+	 * of outbound credits in the adapter. The PCI config access
+	 * should be blocked until PE reset. MMIO access is dropped
+	 * by hardware certainly. In order to drop PCI config requests,
+	 * one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which
+	 * will be checked in the backend for PE state retrieval. If
+	 * the PE becomes frozen for the first time and the flag has
+	 * been set for the PE, we will set EEH_PE_CFG_BLOCKED for
+	 * that PE to block its config space.
+	 *
+	 * Broadcom BCM5718 2-ports NICs (14e4:1656)
+	 * Broadcom Austin 4-ports NICs (14e4:1657)
+	 * Broadcom Shiner 4-ports 1G NICs (14e4:168a)
+	 * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
+	 */
+	if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x1656) ||
+	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x1657) ||
+	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x168a) ||
+	    (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
+	     pdn->device_id == 0x168e))
+		edev->pe->state |= EEH_PE_CFG_RESTRICTED;
+
+	/*
+	 * Cache the PE primary bus, which can't be fetched when
+	 * full hotplug is in progress. In that case, all child
+	 * PCI devices of the PE are expected to be removed prior
+	 * to PE reset.
+	 */
+	if (!(edev->pe->state & EEH_PE_PRI_BUS)) {
+		edev->pe->bus = pci_find_bus(hose->global_number,
+					     pdn->busno);
+		if (edev->pe->bus)
+			edev->pe->state |= EEH_PE_PRI_BUS;
+	}
+
+	/*
+	 * Enable EEH explicitly so that we will do EEH check
+	 * while accessing I/O stuff
+	 */
+	if (!eeh_has_flag(EEH_ENABLED)) {
+		enable_irq(eeh_event_irq);
+		pnv_eeh_enable_phbs();
+		eeh_add_flag(EEH_ENABLED);
+	}
+
+	/* Save memory bars */
+	eeh_save_bars(edev);
+
+	eeh_edev_dbg(edev, "EEH enabled on device\n");
+
+	return edev;
+}
+
+/**
+ * pnv_eeh_set_option - Initialize EEH or MMIO/DMA reenable
+ * @pe: EEH PE
+ * @option: operation to be issued
+ *
+ * The function is used to control the EEH functionality globally.
+ * Currently, following options are support according to PAPR:
+ * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
+ */
+static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
+{
+	struct pci_controller *hose = pe->phb;
+	struct pnv_phb *phb = hose->private_data;
+	bool freeze_pe = false;
+	int opt;
+	s64 rc;
+
+	switch (option) {
+	case EEH_OPT_DISABLE:
+		return -EPERM;
+	case EEH_OPT_ENABLE:
+		return 0;
+	case EEH_OPT_THAW_MMIO:
+		opt = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO;
+		break;
+	case EEH_OPT_THAW_DMA:
+		opt = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA;
+		break;
+	case EEH_OPT_FREEZE_PE:
+		freeze_pe = true;
+		opt = OPAL_EEH_ACTION_SET_FREEZE_ALL;
+		break;
+	default:
+		pr_warn("%s: Invalid option %d\n", __func__, option);
+		return -EINVAL;
+	}
+
+	/* Freeze master and slave PEs if PHB supports compound PEs */
+	if (freeze_pe) {
+		if (phb->freeze_pe) {
+			phb->freeze_pe(phb, pe->addr);
+			return 0;
+		}
+
+		rc = opal_pci_eeh_freeze_set(phb->opal_id, pe->addr, opt);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",
+				__func__, rc, phb->hose->global_number,
+				pe->addr);
+			return -EIO;
+		}
+
+		return 0;
+	}
+
+	/* Unfreeze master and slave PEs if PHB supports */
+	if (phb->unfreeze_pe)
+		return phb->unfreeze_pe(phb, pe->addr, opt);
+
+	rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe->addr, opt);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n",
+			__func__, rc, option, phb->hose->global_number,
+			pe->addr);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb->private_data;
+	s64 rc;
+
+	rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data,
+					 phb->diag_data_size);
+	if (rc != OPAL_SUCCESS)
+		pr_warn("%s: Failure %lld getting PHB#%x diag-data\n",
+			__func__, rc, pe->phb->global_number);
+}
+
+static int pnv_eeh_get_phb_state(struct eeh_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb->private_data;
+	u8 fstate = 0;
+	__be16 pcierr = 0;
+	s64 rc;
+	int result = 0;
+
+	rc = opal_pci_eeh_freeze_status(phb->opal_id,
+					pe->addr,
+					&fstate,
+					&pcierr,
+					NULL);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld getting PHB#%x state\n",
+			__func__, rc, phb->hose->global_number);
+		return EEH_STATE_NOT_SUPPORT;
+	}
+
+	/*
+	 * Check PHB state. If the PHB is frozen for the
+	 * first time, to dump the PHB diag-data.
+	 */
+	if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) {
+		result = (EEH_STATE_MMIO_ACTIVE  |
+			  EEH_STATE_DMA_ACTIVE   |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+	} else if (!(pe->state & EEH_PE_ISOLATED)) {
+		eeh_pe_mark_isolated(pe);
+		pnv_eeh_get_phb_diag(pe);
+
+		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+	}
+
+	return result;
+}
+
+static int pnv_eeh_get_pe_state(struct eeh_pe *pe)
+{
+	struct pnv_phb *phb = pe->phb->private_data;
+	u8 fstate = 0;
+	__be16 pcierr = 0;
+	s64 rc;
+	int result;
+
+	/*
+	 * We don't clobber hardware frozen state until PE
+	 * reset is completed. In order to keep EEH core
+	 * moving forward, we have to return operational
+	 * state during PE reset.
+	 */
+	if (pe->state & EEH_PE_RESET) {
+		result = (EEH_STATE_MMIO_ACTIVE  |
+			  EEH_STATE_DMA_ACTIVE   |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+		return result;
+	}
+
+	/*
+	 * Fetch PE state from hardware. If the PHB
+	 * supports compound PE, let it handle that.
+	 */
+	if (phb->get_pe_state) {
+		fstate = phb->get_pe_state(phb, pe->addr);
+	} else {
+		rc = opal_pci_eeh_freeze_status(phb->opal_id,
+						pe->addr,
+						&fstate,
+						&pcierr,
+						NULL);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n",
+				__func__, rc, phb->hose->global_number,
+				pe->addr);
+			return EEH_STATE_NOT_SUPPORT;
+		}
+	}
+
+	/* Figure out state */
+	switch (fstate) {
+	case OPAL_EEH_STOPPED_NOT_FROZEN:
+		result = (EEH_STATE_MMIO_ACTIVE  |
+			  EEH_STATE_DMA_ACTIVE   |
+			  EEH_STATE_MMIO_ENABLED |
+			  EEH_STATE_DMA_ENABLED);
+		break;
+	case OPAL_EEH_STOPPED_MMIO_FREEZE:
+		result = (EEH_STATE_DMA_ACTIVE |
+			  EEH_STATE_DMA_ENABLED);
+		break;
+	case OPAL_EEH_STOPPED_DMA_FREEZE:
+		result = (EEH_STATE_MMIO_ACTIVE |
+			  EEH_STATE_MMIO_ENABLED);
+		break;
+	case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
+		result = 0;
+		break;
+	case OPAL_EEH_STOPPED_RESET:
+		result = EEH_STATE_RESET_ACTIVE;
+		break;
+	case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
+		result = EEH_STATE_UNAVAILABLE;
+		break;
+	case OPAL_EEH_STOPPED_PERM_UNAVAIL:
+		result = EEH_STATE_NOT_SUPPORT;
+		break;
+	default:
+		result = EEH_STATE_NOT_SUPPORT;
+		pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n",
+			__func__, phb->hose->global_number,
+			pe->addr, fstate);
+	}
+
+	/*
+	 * If PHB supports compound PE, to freeze all
+	 * slave PEs for consistency.
+	 *
+	 * If the PE is switching to frozen state for the
+	 * first time, to dump the PHB diag-data.
+	 */
+	if (!(result & EEH_STATE_NOT_SUPPORT) &&
+	    !(result & EEH_STATE_UNAVAILABLE) &&
+	    !(result & EEH_STATE_MMIO_ACTIVE) &&
+	    !(result & EEH_STATE_DMA_ACTIVE)  &&
+	    !(pe->state & EEH_PE_ISOLATED)) {
+		if (phb->freeze_pe)
+			phb->freeze_pe(phb, pe->addr);
+
+		eeh_pe_mark_isolated(pe);
+		pnv_eeh_get_phb_diag(pe);
+
+		if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+			pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+	}
+
+	return result;
+}
+
+/**
+ * pnv_eeh_get_state - Retrieve PE state
+ * @pe: EEH PE
+ * @delay: delay while PE state is temporarily unavailable
+ *
+ * Retrieve the state of the specified PE. For IODA-compitable
+ * platform, it should be retrieved from IODA table. Therefore,
+ * we prefer passing down to hardware implementation to handle
+ * it.
+ */
+static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
+{
+	int ret;
+
+	if (pe->type & EEH_PE_PHB)
+		ret = pnv_eeh_get_phb_state(pe);
+	else
+		ret = pnv_eeh_get_pe_state(pe);
+
+	if (!delay)
+		return ret;
+
+	/*
+	 * If the PE state is temporarily unavailable,
+	 * to inform the EEH core delay for default
+	 * period (1 second)
+	 */
+	*delay = 0;
+	if (ret & EEH_STATE_UNAVAILABLE)
+		*delay = 1000;
+
+	return ret;
+}
+
+static s64 pnv_eeh_poll(unsigned long id)
+{
+	s64 rc = OPAL_HARDWARE;
+
+	while (1) {
+		rc = opal_pci_poll(id);
+		if (rc <= 0)
+			break;
+
+		if (system_state < SYSTEM_RUNNING)
+			udelay(1000 * rc);
+		else
+			msleep(rc);
+	}
+
+	return rc;
+}
+
+int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
+{
+	struct pnv_phb *phb = hose->private_data;
+	s64 rc = OPAL_HARDWARE;
+
+	pr_debug("%s: Reset PHB#%x, option=%d\n",
+		 __func__, hose->global_number, option);
+
+	/* Issue PHB complete reset request */
+	if (option == EEH_RESET_FUNDAMENTAL ||
+	    option == EEH_RESET_HOT)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PHB_COMPLETE,
+				    OPAL_ASSERT_RESET);
+	else if (option == EEH_RESET_DEACTIVATE)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PHB_COMPLETE,
+				    OPAL_DEASSERT_RESET);
+	if (rc < 0)
+		goto out;
+
+	/*
+	 * Poll state of the PHB until the request is done
+	 * successfully. The PHB reset is usually PHB complete
+	 * reset followed by hot reset on root bus. So we also
+	 * need the PCI bus settlement delay.
+	 */
+	if (rc > 0)
+		rc = pnv_eeh_poll(phb->opal_id);
+	if (option == EEH_RESET_DEACTIVATE) {
+		if (system_state < SYSTEM_RUNNING)
+			udelay(1000 * EEH_PE_RST_SETTLE_TIME);
+		else
+			msleep(EEH_PE_RST_SETTLE_TIME);
+	}
+out:
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
+
+	return 0;
+}
+
+static int pnv_eeh_root_reset(struct pci_controller *hose, int option)
+{
+	struct pnv_phb *phb = hose->private_data;
+	s64 rc = OPAL_HARDWARE;
+
+	pr_debug("%s: Reset PHB#%x, option=%d\n",
+		 __func__, hose->global_number, option);
+
+	/*
+	 * During the reset deassert time, we needn't care
+	 * the reset scope because the firmware does nothing
+	 * for fundamental or hot reset during deassert phase.
+	 */
+	if (option == EEH_RESET_FUNDAMENTAL)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PCI_FUNDAMENTAL,
+				    OPAL_ASSERT_RESET);
+	else if (option == EEH_RESET_HOT)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PCI_HOT,
+				    OPAL_ASSERT_RESET);
+	else if (option == EEH_RESET_DEACTIVATE)
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PCI_HOT,
+				    OPAL_DEASSERT_RESET);
+	if (rc < 0)
+		goto out;
+
+	/* Poll state of the PHB until the request is done */
+	if (rc > 0)
+		rc = pnv_eeh_poll(phb->opal_id);
+	if (option == EEH_RESET_DEACTIVATE)
+		msleep(EEH_PE_RST_SETTLE_TIME);
+out:
+	if (rc != OPAL_SUCCESS)
+		return -EIO;
+
+	return 0;
+}
+
+static int __pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
+{
+	struct pci_dn *pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	int aer = edev ? edev->aer_cap : 0;
+	u32 ctrl;
+
+	pr_debug("%s: Secondary Reset PCI bus %04x:%02x with option %d\n",
+		 __func__, pci_domain_nr(dev->bus),
+		 dev->bus->number, option);
+
+	switch (option) {
+	case EEH_RESET_FUNDAMENTAL:
+	case EEH_RESET_HOT:
+		/* Don't report linkDown event */
+		if (aer) {
+			eeh_ops->read_config(edev, aer + PCI_ERR_UNCOR_MASK,
+					     4, &ctrl);
+			ctrl |= PCI_ERR_UNC_SURPDN;
+			eeh_ops->write_config(edev, aer + PCI_ERR_UNCOR_MASK,
+					      4, ctrl);
+		}
+
+		eeh_ops->read_config(edev, PCI_BRIDGE_CONTROL, 2, &ctrl);
+		ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+		eeh_ops->write_config(edev, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+		msleep(EEH_PE_RST_HOLD_TIME);
+		break;
+	case EEH_RESET_DEACTIVATE:
+		eeh_ops->read_config(edev, PCI_BRIDGE_CONTROL, 2, &ctrl);
+		ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+		eeh_ops->write_config(edev, PCI_BRIDGE_CONTROL, 2, ctrl);
+
+		msleep(EEH_PE_RST_SETTLE_TIME);
+
+		/* Continue reporting linkDown event */
+		if (aer) {
+			eeh_ops->read_config(edev, aer + PCI_ERR_UNCOR_MASK,
+					     4, &ctrl);
+			ctrl &= ~PCI_ERR_UNC_SURPDN;
+			eeh_ops->write_config(edev, aer + PCI_ERR_UNCOR_MASK,
+					      4, ctrl);
+		}
+
+		break;
+	}
+
+	return 0;
+}
+
+static int pnv_eeh_bridge_reset(struct pci_dev *pdev, int option)
+{
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct device_node *dn = pci_device_to_OF_node(pdev);
+	uint64_t id = PCI_SLOT_ID(phb->opal_id,
+				  (pdev->bus->number << 8) | pdev->devfn);
+	uint8_t scope;
+	int64_t rc;
+
+	/* Hot reset to the bus if firmware cannot handle */
+	if (!dn || !of_get_property(dn, "ibm,reset-by-firmware", NULL))
+		return __pnv_eeh_bridge_reset(pdev, option);
+
+	pr_debug("%s: FW reset PCI bus %04x:%02x with option %d\n",
+		 __func__, pci_domain_nr(pdev->bus),
+		 pdev->bus->number, option);
+
+	switch (option) {
+	case EEH_RESET_FUNDAMENTAL:
+		scope = OPAL_RESET_PCI_FUNDAMENTAL;
+		break;
+	case EEH_RESET_HOT:
+		scope = OPAL_RESET_PCI_HOT;
+		break;
+	case EEH_RESET_DEACTIVATE:
+		return 0;
+	default:
+		dev_dbg(&pdev->dev, "%s: Unsupported reset %d\n",
+			__func__, option);
+		return -EINVAL;
+	}
+
+	rc = opal_pci_reset(id, scope, OPAL_ASSERT_RESET);
+	if (rc <= OPAL_SUCCESS)
+		goto out;
+
+	rc = pnv_eeh_poll(id);
+out:
+	return (rc == OPAL_SUCCESS) ? 0 : -EIO;
+}
+
+void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+
+	if (pci_is_root_bus(dev->bus)) {
+		hose = pci_bus_to_host(dev->bus);
+		pnv_eeh_root_reset(hose, EEH_RESET_HOT);
+		pnv_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
+	} else {
+		pnv_eeh_bridge_reset(dev, EEH_RESET_HOT);
+		pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
+	}
+}
+
+static void pnv_eeh_wait_for_pending(struct pci_dn *pdn, const char *type,
+				     int pos, u16 mask)
+{
+	struct eeh_dev *edev = pdn->edev;
+	int i, status = 0;
+
+	/* Wait for Transaction Pending bit to be cleared */
+	for (i = 0; i < 4; i++) {
+		eeh_ops->read_config(edev, pos, 2, &status);
+		if (!(status & mask))
+			return;
+
+		msleep((1 << i) * 100);
+	}
+
+	pr_warn("%s: Pending transaction while issuing %sFLR to %04x:%02x:%02x.%01x\n",
+		__func__, type,
+		pdn->phb->global_number, pdn->busno,
+		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+}
+
+static int pnv_eeh_do_flr(struct pci_dn *pdn, int option)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	u32 reg = 0;
+
+	if (WARN_ON(!edev->pcie_cap))
+		return -ENOTTY;
+
+	eeh_ops->read_config(edev, edev->pcie_cap + PCI_EXP_DEVCAP, 4, &reg);
+	if (!(reg & PCI_EXP_DEVCAP_FLR))
+		return -ENOTTY;
+
+	switch (option) {
+	case EEH_RESET_HOT:
+	case EEH_RESET_FUNDAMENTAL:
+		pnv_eeh_wait_for_pending(pdn, "",
+					 edev->pcie_cap + PCI_EXP_DEVSTA,
+					 PCI_EXP_DEVSTA_TRPND);
+		eeh_ops->read_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL,
+				     4, &reg);
+		reg |= PCI_EXP_DEVCTL_BCR_FLR;
+		eeh_ops->write_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL,
+				      4, reg);
+		msleep(EEH_PE_RST_HOLD_TIME);
+		break;
+	case EEH_RESET_DEACTIVATE:
+		eeh_ops->read_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL,
+				     4, &reg);
+		reg &= ~PCI_EXP_DEVCTL_BCR_FLR;
+		eeh_ops->write_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL,
+				      4, reg);
+		msleep(EEH_PE_RST_SETTLE_TIME);
+		break;
+	}
+
+	return 0;
+}
+
+static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	u32 cap = 0;
+
+	if (WARN_ON(!edev->af_cap))
+		return -ENOTTY;
+
+	eeh_ops->read_config(edev, edev->af_cap + PCI_AF_CAP, 1, &cap);
+	if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
+		return -ENOTTY;
+
+	switch (option) {
+	case EEH_RESET_HOT:
+	case EEH_RESET_FUNDAMENTAL:
+		/*
+		 * Wait for Transaction Pending bit to clear. A word-aligned
+		 * test is used, so we use the control offset rather than status
+		 * and shift the test bit to match.
+		 */
+		pnv_eeh_wait_for_pending(pdn, "AF",
+					 edev->af_cap + PCI_AF_CTRL,
+					 PCI_AF_STATUS_TP << 8);
+		eeh_ops->write_config(edev, edev->af_cap + PCI_AF_CTRL,
+				      1, PCI_AF_CTRL_FLR);
+		msleep(EEH_PE_RST_HOLD_TIME);
+		break;
+	case EEH_RESET_DEACTIVATE:
+		eeh_ops->write_config(edev, edev->af_cap + PCI_AF_CTRL, 1, 0);
+		msleep(EEH_PE_RST_SETTLE_TIME);
+		break;
+	}
+
+	return 0;
+}
+
+static int pnv_eeh_reset_vf_pe(struct eeh_pe *pe, int option)
+{
+	struct eeh_dev *edev;
+	struct pci_dn *pdn;
+	int ret;
+
+	/* The VF PE should have only one child device */
+	edev = list_first_entry_or_null(&pe->edevs, struct eeh_dev, entry);
+	pdn = eeh_dev_to_pdn(edev);
+	if (!pdn)
+		return -ENXIO;
+
+	ret = pnv_eeh_do_flr(pdn, option);
+	if (!ret)
+		return ret;
+
+	return pnv_eeh_do_af_flr(pdn, option);
+}
+
+/**
+ * pnv_eeh_reset - Reset the specified PE
+ * @pe: EEH PE
+ * @option: reset option
+ *
+ * Do reset on the indicated PE. For PCI bus sensitive PE,
+ * we need to reset the parent p2p bridge. The PHB has to
+ * be reinitialized if the p2p bridge is root bridge. For
+ * PCI device sensitive PE, we will try to reset the device
+ * through FLR. For now, we don't have OPAL APIs to do HARD
+ * reset yet, so all reset would be SOFT (HOT) reset.
+ */
+static int pnv_eeh_reset(struct eeh_pe *pe, int option)
+{
+	struct pci_controller *hose = pe->phb;
+	struct pnv_phb *phb;
+	struct pci_bus *bus;
+	int64_t rc;
+
+	/*
+	 * For PHB reset, we always have complete reset. For those PEs whose
+	 * primary bus derived from root complex (root bus) or root port
+	 * (usually bus#1), we apply hot or fundamental reset on the root port.
+	 * For other PEs, we always have hot reset on the PE primary bus.
+	 *
+	 * Here, we have different design to pHyp, which always clear the
+	 * frozen state during PE reset. However, the good idea here from
+	 * benh is to keep frozen state before we get PE reset done completely
+	 * (until BAR restore). With the frozen state, HW drops illegal IO
+	 * or MMIO access, which can incur recursive frozen PE during PE
+	 * reset. The side effect is that EEH core has to clear the frozen
+	 * state explicitly after BAR restore.
+	 */
+	if (pe->type & EEH_PE_PHB)
+		return pnv_eeh_phb_reset(hose, option);
+
+	/*
+	 * The frozen PE might be caused by PAPR error injection
+	 * registers, which are expected to be cleared after hitting
+	 * frozen PE as stated in the hardware spec. Unfortunately,
+	 * that's not true on P7IOC. So we have to clear it manually
+	 * to avoid recursive EEH errors during recovery.
+	 */
+	phb = hose->private_data;
+	if (phb->model == PNV_PHB_MODEL_P7IOC &&
+	    (option == EEH_RESET_HOT ||
+	     option == EEH_RESET_FUNDAMENTAL)) {
+		rc = opal_pci_reset(phb->opal_id,
+				    OPAL_RESET_PHB_ERROR,
+				    OPAL_ASSERT_RESET);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("%s: Failure %lld clearing error injection registers\n",
+				__func__, rc);
+			return -EIO;
+		}
+	}
+
+	if (pe->type & EEH_PE_VF)
+		return pnv_eeh_reset_vf_pe(pe, option);
+
+	bus = eeh_pe_bus_get(pe);
+	if (!bus) {
+		pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n",
+			__func__, pe->phb->global_number, pe->addr);
+		return -EIO;
+	}
+
+	if (pci_is_root_bus(bus))
+		return pnv_eeh_root_reset(hose, option);
+
+	/*
+	 * For hot resets try use the generic PCI error recovery reset
+	 * functions. These correctly handles the case where the secondary
+	 * bus is behind a hotplug slot and it will use the slot provided
+	 * reset methods to prevent spurious hotplug events during the reset.
+	 *
+	 * Fundamental resets need to be handled internally to EEH since the
+	 * PCI core doesn't really have a concept of a fundamental reset,
+	 * mainly because there's no standard way to generate one. Only a
+	 * few devices require an FRESET so it should be fine.
+	 */
+	if (option != EEH_RESET_FUNDAMENTAL) {
+		/*
+		 * NB: Skiboot and pnv_eeh_bridge_reset() also no-op the
+		 *     de-assert step. It's like the OPAL reset API was
+		 *     poorly designed or something...
+		 */
+		if (option == EEH_RESET_DEACTIVATE)
+			return 0;
+
+		rc = pci_bus_error_reset(bus->self);
+		if (!rc)
+			return 0;
+	}
+
+	/* otherwise, use the generic bridge reset. this might call into FW */
+	if (pci_is_root_bus(bus->parent))
+		return pnv_eeh_root_reset(hose, option);
+	return pnv_eeh_bridge_reset(bus->self, option);
+}
+
+/**
+ * pnv_eeh_get_log - Retrieve error log
+ * @pe: EEH PE
+ * @severity: temporary or permanent error log
+ * @drv_log: driver log to be combined with retrieved error log
+ * @len: length of driver log
+ *
+ * Retrieve the temporary or permanent error from the PE.
+ */
+static int pnv_eeh_get_log(struct eeh_pe *pe, int severity,
+			   char *drv_log, unsigned long len)
+{
+	if (!eeh_has_flag(EEH_EARLY_DUMP_LOG))
+		pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
+
+	return 0;
+}
+
+/**
+ * pnv_eeh_configure_bridge - Configure PCI bridges in the indicated PE
+ * @pe: EEH PE
+ *
+ * The function will be called to reconfigure the bridges included
+ * in the specified PE so that the mulfunctional PE would be recovered
+ * again.
+ */
+static int pnv_eeh_configure_bridge(struct eeh_pe *pe)
+{
+	return 0;
+}
+
+/**
+ * pnv_pe_err_inject - Inject specified error to the indicated PE
+ * @pe: the indicated PE
+ * @type: error type
+ * @func: specific error type
+ * @addr: address
+ * @mask: address mask
+ *
+ * The routine is called to inject specified error, which is
+ * determined by @type and @func, to the indicated PE for
+ * testing purpose.
+ */
+static int pnv_eeh_err_inject(struct eeh_pe *pe, int type, int func,
+			      unsigned long addr, unsigned long mask)
+{
+	struct pci_controller *hose = pe->phb;
+	struct pnv_phb *phb = hose->private_data;
+	s64 rc;
+
+	if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
+	    type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
+		pr_warn("%s: Invalid error type %d\n",
+			__func__, type);
+		return -ERANGE;
+	}
+
+	if (func < OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR ||
+	    func > OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET) {
+		pr_warn("%s: Invalid error function %d\n",
+			__func__, func);
+		return -ERANGE;
+	}
+
+	/* Firmware supports error injection ? */
+	if (!opal_check_token(OPAL_PCI_ERR_INJECT)) {
+		pr_warn("%s: Firmware doesn't support error injection\n",
+			__func__);
+		return -ENXIO;
+	}
+
+	/* Do error injection */
+	rc = opal_pci_err_inject(phb->opal_id, pe->addr,
+				 type, func, addr, mask);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failure %lld injecting error "
+			"%d-%d to PHB#%x-PE#%x\n",
+			__func__, rc, type, func,
+			hose->global_number, pe->addr);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static inline bool pnv_eeh_cfg_blocked(struct pci_dn *pdn)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+
+	if (!edev || !edev->pe)
+		return false;
+
+	/*
+	 * We will issue FLR or AF FLR to all VFs, which are contained
+	 * in VF PE. It relies on the EEH PCI config accessors. So we
+	 * can't block them during the window.
+	 */
+	if (edev->physfn && (edev->pe->state & EEH_PE_RESET))
+		return false;
+
+	if (edev->pe->state & EEH_PE_CFG_BLOCKED)
+		return true;
+
+	return false;
+}
+
+static int pnv_eeh_read_config(struct eeh_dev *edev,
+			       int where, int size, u32 *val)
+{
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
+
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (pnv_eeh_cfg_blocked(pdn)) {
+		*val = 0xFFFFFFFF;
+		return PCIBIOS_SET_FAILED;
+	}
+
+	return pnv_pci_cfg_read(pdn, where, size, val);
+}
+
+static int pnv_eeh_write_config(struct eeh_dev *edev,
+				int where, int size, u32 val)
+{
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
+
+	if (!pdn)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	if (pnv_eeh_cfg_blocked(pdn))
+		return PCIBIOS_SET_FAILED;
+
+	return pnv_pci_cfg_write(pdn, where, size, val);
+}
+
+static void pnv_eeh_dump_hub_diag_common(struct OpalIoP7IOCErrorData *data)
+{
+	/* GEM */
+	if (data->gemXfir || data->gemRfir ||
+	    data->gemRirqfir || data->gemMask || data->gemRwof)
+		pr_info("  GEM: %016llx %016llx %016llx %016llx %016llx\n",
+			be64_to_cpu(data->gemXfir),
+			be64_to_cpu(data->gemRfir),
+			be64_to_cpu(data->gemRirqfir),
+			be64_to_cpu(data->gemMask),
+			be64_to_cpu(data->gemRwof));
+
+	/* LEM */
+	if (data->lemFir || data->lemErrMask ||
+	    data->lemAction0 || data->lemAction1 || data->lemWof)
+		pr_info("  LEM: %016llx %016llx %016llx %016llx %016llx\n",
+			be64_to_cpu(data->lemFir),
+			be64_to_cpu(data->lemErrMask),
+			be64_to_cpu(data->lemAction0),
+			be64_to_cpu(data->lemAction1),
+			be64_to_cpu(data->lemWof));
+}
+
+static void pnv_eeh_get_and_dump_hub_diag(struct pci_controller *hose)
+{
+	struct pnv_phb *phb = hose->private_data;
+	struct OpalIoP7IOCErrorData *data =
+		(struct OpalIoP7IOCErrorData*)phb->diag_data;
+	long rc;
+
+	rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data));
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n",
+			__func__, phb->hub_id, rc);
+		return;
+	}
+
+	switch (be16_to_cpu(data->type)) {
+	case OPAL_P7IOC_DIAG_TYPE_RGC:
+		pr_info("P7IOC diag-data for RGC\n\n");
+		pnv_eeh_dump_hub_diag_common(data);
+		if (data->rgc.rgcStatus || data->rgc.rgcLdcp)
+			pr_info("  RGC: %016llx %016llx\n",
+				be64_to_cpu(data->rgc.rgcStatus),
+				be64_to_cpu(data->rgc.rgcLdcp));
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_BI:
+		pr_info("P7IOC diag-data for BI %s\n\n",
+			data->bi.biDownbound ? "Downbound" : "Upbound");
+		pnv_eeh_dump_hub_diag_common(data);
+		if (data->bi.biLdcp0 || data->bi.biLdcp1 ||
+		    data->bi.biLdcp2 || data->bi.biFenceStatus)
+			pr_info("  BI:  %016llx %016llx %016llx %016llx\n",
+				be64_to_cpu(data->bi.biLdcp0),
+				be64_to_cpu(data->bi.biLdcp1),
+				be64_to_cpu(data->bi.biLdcp2),
+				be64_to_cpu(data->bi.biFenceStatus));
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_CI:
+		pr_info("P7IOC diag-data for CI Port %d\n\n",
+			data->ci.ciPort);
+		pnv_eeh_dump_hub_diag_common(data);
+		if (data->ci.ciPortStatus || data->ci.ciPortLdcp)
+			pr_info("  CI:  %016llx %016llx\n",
+				be64_to_cpu(data->ci.ciPortStatus),
+				be64_to_cpu(data->ci.ciPortLdcp));
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_MISC:
+		pr_info("P7IOC diag-data for MISC\n\n");
+		pnv_eeh_dump_hub_diag_common(data);
+		break;
+	case OPAL_P7IOC_DIAG_TYPE_I2C:
+		pr_info("P7IOC diag-data for I2C\n\n");
+		pnv_eeh_dump_hub_diag_common(data);
+		break;
+	default:
+		pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n",
+			__func__, phb->hub_id, data->type);
+	}
+}
+
+static int pnv_eeh_get_pe(struct pci_controller *hose,
+			  u16 pe_no, struct eeh_pe **pe)
+{
+	struct pnv_phb *phb = hose->private_data;
+	struct pnv_ioda_pe *pnv_pe;
+	struct eeh_pe *dev_pe;
+
+	/*
+	 * If PHB supports compound PE, to fetch
+	 * the master PE because slave PE is invisible
+	 * to EEH core.
+	 */
+	pnv_pe = &phb->ioda.pe_array[pe_no];
+	if (pnv_pe->flags & PNV_IODA_PE_SLAVE) {
+		pnv_pe = pnv_pe->master;
+		WARN_ON(!pnv_pe ||
+			!(pnv_pe->flags & PNV_IODA_PE_MASTER));
+		pe_no = pnv_pe->pe_number;
+	}
+
+	/* Find the PE according to PE# */
+	dev_pe = eeh_pe_get(hose, pe_no);
+	if (!dev_pe)
+		return -EEXIST;
+
+	/* Freeze the (compound) PE */
+	*pe = dev_pe;
+	if (!(dev_pe->state & EEH_PE_ISOLATED))
+		phb->freeze_pe(phb, pe_no);
+
+	/*
+	 * At this point, we're sure the (compound) PE should
+	 * have been frozen. However, we still need poke until
+	 * hitting the frozen PE on top level.
+	 */
+	dev_pe = dev_pe->parent;
+	while (dev_pe && !(dev_pe->type & EEH_PE_PHB)) {
+		int ret;
+		ret = eeh_ops->get_state(dev_pe, NULL);
+		if (ret <= 0 || eeh_state_active(ret)) {
+			dev_pe = dev_pe->parent;
+			continue;
+		}
+
+		/* Frozen parent PE */
+		*pe = dev_pe;
+		if (!(dev_pe->state & EEH_PE_ISOLATED))
+			phb->freeze_pe(phb, dev_pe->addr);
+
+		/* Next one */
+		dev_pe = dev_pe->parent;
+	}
+
+	return 0;
+}
+
+/**
+ * pnv_eeh_next_error - Retrieve next EEH error to handle
+ * @pe: Affected PE
+ *
+ * The function is expected to be called by EEH core while it gets
+ * special EEH event (without binding PE). The function calls to
+ * OPAL APIs for next error to handle. The informational error is
+ * handled internally by platform. However, the dead IOC, dead PHB,
+ * fenced PHB and frozen PE should be handled by EEH core eventually.
+ */
+static int pnv_eeh_next_error(struct eeh_pe **pe)
+{
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+	struct eeh_pe *phb_pe, *parent_pe;
+	__be64 frozen_pe_no;
+	__be16 err_type, severity;
+	long rc;
+	int state, ret = EEH_NEXT_ERR_NONE;
+
+	/*
+	 * While running here, it's safe to purge the event queue. The
+	 * event should still be masked.
+	 */
+	eeh_remove_event(NULL, false);
+
+	list_for_each_entry(hose, &hose_list, list_node) {
+		/*
+		 * If the subordinate PCI buses of the PHB has been
+		 * removed or is exactly under error recovery, we
+		 * needn't take care of it any more.
+		 */
+		phb = hose->private_data;
+		phb_pe = eeh_phb_pe_get(hose);
+		if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
+			continue;
+
+		rc = opal_pci_next_error(phb->opal_id,
+					 &frozen_pe_no, &err_type, &severity);
+		if (rc != OPAL_SUCCESS) {
+			pr_devel("%s: Invalid return value on "
+				 "PHB#%x (0x%lx) from opal_pci_next_error",
+				 __func__, hose->global_number, rc);
+			continue;
+		}
+
+		/* If the PHB doesn't have error, stop processing */
+		if (be16_to_cpu(err_type) == OPAL_EEH_NO_ERROR ||
+		    be16_to_cpu(severity) == OPAL_EEH_SEV_NO_ERROR) {
+			pr_devel("%s: No error found on PHB#%x\n",
+				 __func__, hose->global_number);
+			continue;
+		}
+
+		/*
+		 * Processing the error. We're expecting the error with
+		 * highest priority reported upon multiple errors on the
+		 * specific PHB.
+		 */
+		pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n",
+			__func__, be16_to_cpu(err_type),
+			be16_to_cpu(severity), be64_to_cpu(frozen_pe_no),
+			hose->global_number);
+		switch (be16_to_cpu(err_type)) {
+		case OPAL_EEH_IOC_ERROR:
+			if (be16_to_cpu(severity) == OPAL_EEH_SEV_IOC_DEAD) {
+				pr_err("EEH: dead IOC detected\n");
+				ret = EEH_NEXT_ERR_DEAD_IOC;
+			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
+				pr_info("EEH: IOC informative error "
+					"detected\n");
+				pnv_eeh_get_and_dump_hub_diag(hose);
+				ret = EEH_NEXT_ERR_NONE;
+			}
+
+			break;
+		case OPAL_EEH_PHB_ERROR:
+			if (be16_to_cpu(severity) == OPAL_EEH_SEV_PHB_DEAD) {
+				*pe = phb_pe;
+				pr_err("EEH: dead PHB#%x detected, "
+				       "location: %s\n",
+					hose->global_number,
+					eeh_pe_loc_get(phb_pe));
+				ret = EEH_NEXT_ERR_DEAD_PHB;
+			} else if (be16_to_cpu(severity) ==
+				   OPAL_EEH_SEV_PHB_FENCED) {
+				*pe = phb_pe;
+				pr_err("EEH: Fenced PHB#%x detected, "
+				       "location: %s\n",
+					hose->global_number,
+					eeh_pe_loc_get(phb_pe));
+				ret = EEH_NEXT_ERR_FENCED_PHB;
+			} else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
+				pr_info("EEH: PHB#%x informative error "
+					"detected, location: %s\n",
+					hose->global_number,
+					eeh_pe_loc_get(phb_pe));
+				pnv_eeh_get_phb_diag(phb_pe);
+				pnv_pci_dump_phb_diag_data(hose, phb_pe->data);
+				ret = EEH_NEXT_ERR_NONE;
+			}
+
+			break;
+		case OPAL_EEH_PE_ERROR:
+			/*
+			 * If we can't find the corresponding PE, we
+			 * just try to unfreeze.
+			 */
+			if (pnv_eeh_get_pe(hose,
+				be64_to_cpu(frozen_pe_no), pe)) {
+				pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n",
+					hose->global_number, be64_to_cpu(frozen_pe_no));
+				pr_info("EEH: PHB location: %s\n",
+					eeh_pe_loc_get(phb_pe));
+
+				/* Dump PHB diag-data */
+				rc = opal_pci_get_phb_diag_data2(phb->opal_id,
+					phb->diag_data, phb->diag_data_size);
+				if (rc == OPAL_SUCCESS)
+					pnv_pci_dump_phb_diag_data(hose,
+							phb->diag_data);
+
+				/* Try best to clear it */
+				opal_pci_eeh_freeze_clear(phb->opal_id,
+					be64_to_cpu(frozen_pe_no),
+					OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+				ret = EEH_NEXT_ERR_NONE;
+			} else if ((*pe)->state & EEH_PE_ISOLATED ||
+				   eeh_pe_passed(*pe)) {
+				ret = EEH_NEXT_ERR_NONE;
+			} else {
+				pr_err("EEH: Frozen PE#%x "
+				       "on PHB#%x detected\n",
+				       (*pe)->addr,
+					(*pe)->phb->global_number);
+				pr_err("EEH: PE location: %s, "
+				       "PHB location: %s\n",
+				       eeh_pe_loc_get(*pe),
+				       eeh_pe_loc_get(phb_pe));
+				ret = EEH_NEXT_ERR_FROZEN_PE;
+			}
+
+			break;
+		default:
+			pr_warn("%s: Unexpected error type %d\n",
+				__func__, be16_to_cpu(err_type));
+		}
+
+		/*
+		 * EEH core will try recover from fenced PHB or
+		 * frozen PE. In the time for frozen PE, EEH core
+		 * enable IO path for that before collecting logs,
+		 * but it ruins the site. So we have to dump the
+		 * log in advance here.
+		 */
+		if ((ret == EEH_NEXT_ERR_FROZEN_PE  ||
+		    ret == EEH_NEXT_ERR_FENCED_PHB) &&
+		    !((*pe)->state & EEH_PE_ISOLATED)) {
+			eeh_pe_mark_isolated(*pe);
+			pnv_eeh_get_phb_diag(*pe);
+
+			if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
+				pnv_pci_dump_phb_diag_data((*pe)->phb,
+							   (*pe)->data);
+		}
+
+		/*
+		 * We probably have the frozen parent PE out there and
+		 * we need have to handle frozen parent PE firstly.
+		 */
+		if (ret == EEH_NEXT_ERR_FROZEN_PE) {
+			parent_pe = (*pe)->parent;
+			while (parent_pe) {
+				/* Hit the ceiling ? */
+				if (parent_pe->type & EEH_PE_PHB)
+					break;
+
+				/* Frozen parent PE ? */
+				state = eeh_ops->get_state(parent_pe, NULL);
+				if (state > 0 && !eeh_state_active(state))
+					*pe = parent_pe;
+
+				/* Next parent level */
+				parent_pe = parent_pe->parent;
+			}
+
+			/* We possibly migrate to another PE */
+			eeh_pe_mark_isolated(*pe);
+		}
+
+		/*
+		 * If we have no errors on the specific PHB or only
+		 * informative error there, we continue poking it.
+		 * Otherwise, we need actions to be taken by upper
+		 * layer.
+		 */
+		if (ret > EEH_NEXT_ERR_INF)
+			break;
+	}
+
+	/* Unmask the event */
+	if (ret == EEH_NEXT_ERR_NONE && eeh_enabled())
+		enable_irq(eeh_event_irq);
+
+	return ret;
+}
+
+static int pnv_eeh_restore_config(struct eeh_dev *edev)
+{
+	struct pnv_phb *phb;
+	s64 ret = 0;
+
+	if (!edev)
+		return -EEXIST;
+
+	if (edev->physfn)
+		return 0;
+
+	phb = edev->controller->private_data;
+	ret = opal_pci_reinit(phb->opal_id,
+			      OPAL_REINIT_PCI_DEV, edev->bdfn);
+
+	if (ret) {
+		pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n",
+			__func__, edev->bdfn, ret);
+		return -EIO;
+	}
+
+	return ret;
+}
+
+static struct eeh_ops pnv_eeh_ops = {
+	.name                   = "powernv",
+	.probe			= pnv_eeh_probe,
+	.set_option             = pnv_eeh_set_option,
+	.get_state              = pnv_eeh_get_state,
+	.reset                  = pnv_eeh_reset,
+	.get_log                = pnv_eeh_get_log,
+	.configure_bridge       = pnv_eeh_configure_bridge,
+	.err_inject		= pnv_eeh_err_inject,
+	.read_config            = pnv_eeh_read_config,
+	.write_config           = pnv_eeh_write_config,
+	.next_error		= pnv_eeh_next_error,
+	.restore_config		= pnv_eeh_restore_config,
+	.notify_resume		= NULL
+};
+
+/**
+ * eeh_powernv_init - Register platform dependent EEH operations
+ *
+ * EEH initialization on powernv platform. This function should be
+ * called before any EEH related functions.
+ */
+static int __init eeh_powernv_init(void)
+{
+	int max_diag_size = PNV_PCI_DIAG_BUF_SIZE;
+	struct pci_controller *hose;
+	struct pnv_phb *phb;
+	int ret = -EINVAL;
+
+	if (!firmware_has_feature(FW_FEATURE_OPAL)) {
+		pr_warn("%s: OPAL is required !\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Set probe mode */
+	eeh_add_flag(EEH_PROBE_MODE_DEV);
+
+	/*
+	 * P7IOC blocks PCI config access to frozen PE, but PHB3
+	 * doesn't do that. So we have to selectively enable I/O
+	 * prior to collecting error log.
+	 */
+	list_for_each_entry(hose, &hose_list, list_node) {
+		phb = hose->private_data;
+
+		if (phb->model == PNV_PHB_MODEL_P7IOC)
+			eeh_add_flag(EEH_ENABLE_IO_FOR_LOG);
+
+		if (phb->diag_data_size > max_diag_size)
+			max_diag_size = phb->diag_data_size;
+
+		break;
+	}
+
+	/*
+	 * eeh_init() allocates the eeh_pe and its aux data buf so the
+	 * size needs to be set before calling eeh_init().
+	 */
+	eeh_set_pe_aux_size(max_diag_size);
+	ppc_md.pcibios_bus_add_device = pnv_pcibios_bus_add_device;
+
+	ret = eeh_init(&pnv_eeh_ops);
+	if (!ret)
+		pr_info("EEH: PowerNV platform initialized\n");
+	else
+		pr_info("EEH: Failed to initialize PowerNV platform (%d)\n", ret);
+
+	return ret;
+}
+machine_arch_initcall(powernv, eeh_powernv_init);