Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 418 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
new file mode 100644
index 000000000..d129d6d45
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PowerNV LPC bus handling.
+ *
+ * Copyright 2013 IBM Corp.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/opal.h>
+#include <asm/prom.h>
+#include <linux/uaccess.h>
+#include <asm/isa-bridge.h>
+
+static int opal_lpc_chip_id = -1;
+
+static u8 opal_lpc_inb(unsigned long port)
+{
+	int64_t rc;
+	__be32 data;
+
+	if (opal_lpc_chip_id < 0 || port > 0xffff)
+		return 0xff;
+	rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 1);
+	return rc ? 0xff : be32_to_cpu(data);
+}
+
+static __le16 __opal_lpc_inw(unsigned long port)
+{
+	int64_t rc;
+	__be32 data;
+
+	if (opal_lpc_chip_id < 0 || port > 0xfffe)
+		return 0xffff;
+	if (port & 1)
+		return (__le16)opal_lpc_inb(port) << 8 | opal_lpc_inb(port + 1);
+	rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 2);
+	return rc ? 0xffff : be32_to_cpu(data);
+}
+static u16 opal_lpc_inw(unsigned long port)
+{
+	return le16_to_cpu(__opal_lpc_inw(port));
+}
+
+static __le32 __opal_lpc_inl(unsigned long port)
+{
+	int64_t rc;
+	__be32 data;
+
+	if (opal_lpc_chip_id < 0 || port > 0xfffc)
+		return 0xffffffff;
+	if (port & 3)
+		return (__le32)opal_lpc_inb(port    ) << 24 |
+		       (__le32)opal_lpc_inb(port + 1) << 16 |
+		       (__le32)opal_lpc_inb(port + 2) <<  8 |
+			       opal_lpc_inb(port + 3);
+	rc = opal_lpc_read(opal_lpc_chip_id, OPAL_LPC_IO, port, &data, 4);
+	return rc ? 0xffffffff : be32_to_cpu(data);
+}
+
+static u32 opal_lpc_inl(unsigned long port)
+{
+	return le32_to_cpu(__opal_lpc_inl(port));
+}
+
+static void opal_lpc_outb(u8 val, unsigned long port)
+{
+	if (opal_lpc_chip_id < 0 || port > 0xffff)
+		return;
+	opal_lpc_write(opal_lpc_chip_id, OPAL_LPC_IO, port, val, 1);
+}
+
+static void __opal_lpc_outw(__le16 val, unsigned long port)
+{
+	if (opal_lpc_chip_id < 0 || port > 0xfffe)
+		return;
+	if (port & 1) {
+		opal_lpc_outb(val >> 8, port);
+		opal_lpc_outb(val     , port + 1);
+		return;
+	}
+	opal_lpc_write(opal_lpc_chip_id, OPAL_LPC_IO, port, val, 2);
+}
+
+static void opal_lpc_outw(u16 val, unsigned long port)
+{
+	__opal_lpc_outw(cpu_to_le16(val), port);
+}
+
+static void __opal_lpc_outl(__le32 val, unsigned long port)
+{
+	if (opal_lpc_chip_id < 0 || port > 0xfffc)
+		return;
+	if (port & 3) {
+		opal_lpc_outb(val >> 24, port);
+		opal_lpc_outb(val >> 16, port + 1);
+		opal_lpc_outb(val >>  8, port + 2);
+		opal_lpc_outb(val      , port + 3);
+		return;
+	}
+	opal_lpc_write(opal_lpc_chip_id, OPAL_LPC_IO, port, val, 4);
+}
+
+static void opal_lpc_outl(u32 val, unsigned long port)
+{
+	__opal_lpc_outl(cpu_to_le32(val), port);
+}
+
+static void opal_lpc_insb(unsigned long p, void *b, unsigned long c)
+{
+	u8 *ptr = b;
+
+	while(c--)
+		*(ptr++) = opal_lpc_inb(p);
+}
+
+static void opal_lpc_insw(unsigned long p, void *b, unsigned long c)
+{
+	__le16 *ptr = b;
+
+	while(c--)
+		*(ptr++) = __opal_lpc_inw(p);
+}
+
+static void opal_lpc_insl(unsigned long p, void *b, unsigned long c)
+{
+	__le32 *ptr = b;
+
+	while(c--)
+		*(ptr++) = __opal_lpc_inl(p);
+}
+
+static void opal_lpc_outsb(unsigned long p, const void *b, unsigned long c)
+{
+	const u8 *ptr = b;
+
+	while(c--)
+		opal_lpc_outb(*(ptr++), p);
+}
+
+static void opal_lpc_outsw(unsigned long p, const void *b, unsigned long c)
+{
+	const __le16 *ptr = b;
+
+	while(c--)
+		__opal_lpc_outw(*(ptr++), p);
+}
+
+static void opal_lpc_outsl(unsigned long p, const void *b, unsigned long c)
+{
+	const __le32 *ptr = b;
+
+	while(c--)
+		__opal_lpc_outl(*(ptr++), p);
+}
+
+static const struct ppc_pci_io opal_lpc_io = {
+	.inb	= opal_lpc_inb,
+	.inw	= opal_lpc_inw,
+	.inl	= opal_lpc_inl,
+	.outb	= opal_lpc_outb,
+	.outw	= opal_lpc_outw,
+	.outl	= opal_lpc_outl,
+	.insb	= opal_lpc_insb,
+	.insw	= opal_lpc_insw,
+	.insl	= opal_lpc_insl,
+	.outsb	= opal_lpc_outsb,
+	.outsw	= opal_lpc_outsw,
+	.outsl	= opal_lpc_outsl,
+};
+
+#ifdef CONFIG_DEBUG_FS
+struct lpc_debugfs_entry {
+	enum OpalLPCAddressType lpc_type;
+};
+
+static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf,
+			      size_t count, loff_t *ppos)
+{
+	struct lpc_debugfs_entry *lpc = filp->private_data;
+	u32 data, pos, len, todo;
+	int rc;
+
+	if (!access_ok(ubuf, count))
+		return -EFAULT;
+
+	todo = count;
+	while (todo) {
+		pos = *ppos;
+
+		/*
+		 * Select access size based on count and alignment and
+		 * access type. IO and MEM only support byte accesses,
+		 * FW supports all 3.
+		 */
+		len = 1;
+		if (lpc->lpc_type == OPAL_LPC_FW) {
+			if (todo > 3 && (pos & 3) == 0)
+				len = 4;
+			else if (todo > 1 && (pos & 1) == 0)
+				len = 2;
+		}
+		rc = opal_lpc_read(opal_lpc_chip_id, lpc->lpc_type, pos,
+				   &data, len);
+		if (rc)
+			return -ENXIO;
+
+		/*
+		 * Now there is some trickery with the data returned by OPAL
+		 * as it's the desired data right justified in a 32-bit BE
+		 * word.
+		 *
+		 * This is a very bad interface and I'm to blame for it :-(
+		 *
+		 * So we can't just apply a 32-bit swap to what comes from OPAL,
+		 * because user space expects the *bytes* to be in their proper
+		 * respective positions (ie, LPC position).
+		 *
+		 * So what we really want to do here is to shift data right
+		 * appropriately on a LE kernel.
+		 *
+		 * IE. If the LPC transaction has bytes B0, B1, B2 and B3 in that
+		 * order, we have in memory written to by OPAL at the "data"
+		 * pointer:
+		 *
+		 *               Bytes:      OPAL "data"   LE "data"
+		 *   32-bit:   B0 B1 B2 B3   B0B1B2B3      B3B2B1B0
+		 *   16-bit:   B0 B1         0000B0B1      B1B00000
+		 *    8-bit:   B0            000000B0      B0000000
+		 *
+		 * So a BE kernel will have the leftmost of the above in the MSB
+		 * and rightmost in the LSB and can just then "cast" the u32 "data"
+		 * down to the appropriate quantity and write it.
+		 *
+		 * However, an LE kernel can't. It doesn't need to swap because a
+		 * load from data followed by a store to user are going to preserve
+		 * the byte ordering which is the wire byte order which is what the
+		 * user wants, but in order to "crop" to the right size, we need to
+		 * shift right first.
+		 */
+		switch(len) {
+		case 4:
+			rc = __put_user((u32)data, (u32 __user *)ubuf);
+			break;
+		case 2:
+#ifdef __LITTLE_ENDIAN__
+			data >>= 16;
+#endif
+			rc = __put_user((u16)data, (u16 __user *)ubuf);
+			break;
+		default:
+#ifdef __LITTLE_ENDIAN__
+			data >>= 24;
+#endif
+			rc = __put_user((u8)data, (u8 __user *)ubuf);
+			break;
+		}
+		if (rc)
+			return -EFAULT;
+		*ppos += len;
+		ubuf += len;
+		todo -= len;
+	}
+
+	return count;
+}
+
+static ssize_t lpc_debug_write(struct file *filp, const char __user *ubuf,
+			       size_t count, loff_t *ppos)
+{
+	struct lpc_debugfs_entry *lpc = filp->private_data;
+	u32 data, pos, len, todo;
+	int rc;
+
+	if (!access_ok(ubuf, count))
+		return -EFAULT;
+
+	todo = count;
+	while (todo) {
+		pos = *ppos;
+
+		/*
+		 * Select access size based on count and alignment and
+		 * access type. IO and MEM only support byte acceses,
+		 * FW supports all 3.
+		 */
+		len = 1;
+		if (lpc->lpc_type == OPAL_LPC_FW) {
+			if (todo > 3 && (pos & 3) == 0)
+				len = 4;
+			else if (todo > 1 && (pos & 1) == 0)
+				len = 2;
+		}
+
+		/*
+		 * Similarly to the read case, we have some trickery here but
+		 * it's different to handle. We need to pass the value to OPAL in
+		 * a register whose layout depends on the access size. We want
+		 * to reproduce the memory layout of the user, however we aren't
+		 * doing a load from user and a store to another memory location
+		 * which would achieve that. Here we pass the value to OPAL via
+		 * a register which is expected to contain the "BE" interpretation
+		 * of the byte sequence. IE: for a 32-bit access, byte 0 should be
+		 * in the MSB. So here we *do* need to byteswap on LE.
+		 *
+		 *           User bytes:    LE "data"  OPAL "data"
+		 *  32-bit:  B0 B1 B2 B3    B3B2B1B0   B0B1B2B3
+		 *  16-bit:  B0 B1          0000B1B0   0000B0B1
+		 *   8-bit:  B0             000000B0   000000B0
+		 */
+		switch(len) {
+		case 4:
+			rc = __get_user(data, (u32 __user *)ubuf);
+			data = cpu_to_be32(data);
+			break;
+		case 2:
+			rc = __get_user(data, (u16 __user *)ubuf);
+			data = cpu_to_be16(data);
+			break;
+		default:
+			rc = __get_user(data, (u8 __user *)ubuf);
+			break;
+		}
+		if (rc)
+			return -EFAULT;
+
+		rc = opal_lpc_write(opal_lpc_chip_id, lpc->lpc_type, pos,
+				    data, len);
+		if (rc)
+			return -ENXIO;
+		*ppos += len;
+		ubuf += len;
+		todo -= len;
+	}
+
+	return count;
+}
+
+static const struct file_operations lpc_fops = {
+	.read =		lpc_debug_read,
+	.write =	lpc_debug_write,
+	.open =		simple_open,
+	.llseek =	default_llseek,
+};
+
+static int opal_lpc_debugfs_create_type(struct dentry *folder,
+					const char *fname,
+					enum OpalLPCAddressType type)
+{
+	struct lpc_debugfs_entry *entry;
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+	entry->lpc_type = type;
+	debugfs_create_file(fname, 0600, folder, entry, &lpc_fops);
+	return 0;
+}
+
+static int opal_lpc_init_debugfs(void)
+{
+	struct dentry *root;
+	int rc = 0;
+
+	if (opal_lpc_chip_id < 0)
+		return -ENODEV;
+
+	root = debugfs_create_dir("lpc", arch_debugfs_dir);
+
+	rc |= opal_lpc_debugfs_create_type(root, "io", OPAL_LPC_IO);
+	rc |= opal_lpc_debugfs_create_type(root, "mem", OPAL_LPC_MEM);
+	rc |= opal_lpc_debugfs_create_type(root, "fw", OPAL_LPC_FW);
+	return rc;
+}
+machine_device_initcall(powernv, opal_lpc_init_debugfs);
+#endif  /* CONFIG_DEBUG_FS */
+
+void __init opal_lpc_init(void)
+{
+	struct device_node *np;
+
+	/*
+	 * Look for a Power8 LPC bus tagged as "primary",
+	 * we currently support only one though the OPAL APIs
+	 * support any number.
+	 */
+	for_each_compatible_node(np, NULL, "ibm,power8-lpc") {
+		if (!of_device_is_available(np))
+			continue;
+		if (!of_get_property(np, "primary", NULL))
+			continue;
+		opal_lpc_chip_id = of_get_ibm_chip_id(np);
+		of_node_put(np);
+		break;
+	}
+	if (opal_lpc_chip_id < 0)
+		return;
+
+	/* Does it support direct mapping ? */
+	if (of_get_property(np, "ranges", NULL)) {
+		pr_info("OPAL: Found memory mapped LPC bus on chip %d\n",
+			opal_lpc_chip_id);
+		isa_bridge_init_non_pci(np);
+	} else {
+		pr_info("OPAL: Found non-mapped LPC bus on chip %d\n",
+			opal_lpc_chip_id);
+
+		/* Setup special IO ops */
+		ppc_pci_io = opal_lpc_io;
+		isa_io_special = true;
+	}
+}