Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 114 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/pseries/rtas-fadump.h b/arch/powerpc/platforms/pseries/rtas-fadump.h
new file mode 100644
index 000000000..fd59bd7ca
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/rtas-fadump.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Firmware-Assisted Dump support on POWERVM platform.
+ *
+ * Copyright 2011, Mahesh Salgaonkar, IBM Corporation.
+ * Copyright 2019, Hari Bathini, IBM Corporation.
+ */
+
+#ifndef _PSERIES_RTAS_FADUMP_H
+#define _PSERIES_RTAS_FADUMP_H
+
+/*
+ * On some Power systems where RMO is 128MB, it still requires minimum of
+ * 256MB for kernel to boot successfully. When kdump infrastructure is
+ * configured to save vmcore over network, we run into OOM issue while
+ * loading modules related to network setup. Hence we need additional 64M
+ * of memory to avoid OOM issue.
+ */
+#define RTAS_FADUMP_MIN_BOOT_MEM	((0x1UL << 28) + (0x1UL << 26))
+
+/* Firmware provided dump sections */
+#define RTAS_FADUMP_CPU_STATE_DATA	0x0001
+#define RTAS_FADUMP_HPTE_REGION		0x0002
+#define RTAS_FADUMP_REAL_MODE_REGION	0x0011
+
+/* Dump request flag */
+#define RTAS_FADUMP_REQUEST_FLAG	0x00000001
+
+/* Dump status flag */
+#define RTAS_FADUMP_ERROR_FLAG		0x2000
+
+/* Kernel Dump section info */
+struct rtas_fadump_section {
+	__be32	request_flag;
+	__be16	source_data_type;
+	__be16	error_flags;
+	__be64	source_address;
+	__be64	source_len;
+	__be64	bytes_dumped;
+	__be64	destination_address;
+};
+
+/* ibm,configure-kernel-dump header. */
+struct rtas_fadump_section_header {
+	__be32	dump_format_version;
+	__be16	dump_num_sections;
+	__be16	dump_status_flag;
+	__be32	offset_first_dump_section;
+
+	/* Fields for disk dump option. */
+	__be32	dd_block_size;
+	__be64	dd_block_offset;
+	__be64	dd_num_blocks;
+	__be32	dd_offset_disk_path;
+
+	/* Maximum time allowed to prevent an automatic dump-reboot. */
+	__be32	max_time_auto;
+};
+
+/*
+ * Firmware Assisted dump memory structure. This structure is required for
+ * registering future kernel dump with power firmware through rtas call.
+ *
+ * No disk dump option. Hence disk dump path string section is not included.
+ */
+struct rtas_fadump_mem_struct {
+	struct rtas_fadump_section_header	header;
+
+	/* Kernel dump sections */
+	struct rtas_fadump_section		cpu_state_data;
+	struct rtas_fadump_section		hpte_region;
+
+	/*
+	 * TODO: Extend multiple boot memory regions support in the kernel
+	 *       for this platform.
+	 */
+	struct rtas_fadump_section		rmr_region;
+};
+
+/*
+ * The firmware-assisted dump format.
+ *
+ * The register save area is an area in the partition's memory used to preserve
+ * the register contents (CPU state data) for the active CPUs during a firmware
+ * assisted dump. The dump format contains register save area header followed
+ * by register entries. Each list of registers for a CPU starts with "CPUSTRT"
+ * and ends with "CPUEND".
+ */
+
+/* Register save area header. */
+struct rtas_fadump_reg_save_area_header {
+	__be64		magic_number;
+	__be32		version;
+	__be32		num_cpu_offset;
+};
+
+/* Register entry. */
+struct rtas_fadump_reg_entry {
+	__be64		reg_id;
+	__be64		reg_value;
+};
+
+/* Utility macros */
+#define RTAS_FADUMP_SKIP_TO_NEXT_CPU(reg_entry)				\
+({									\
+	while (be64_to_cpu(reg_entry->reg_id) !=			\
+	       fadump_str_to_u64("CPUEND"))				\
+		reg_entry++;						\
+	reg_entry++;							\
+})
+
+#define RTAS_FADUMP_CPU_ID_MASK			((1UL << 32) - 1)
+
+#endif /* _PSERIES_RTAS_FADUMP_H */